NSF Product and Service Listings
These NSF Official Listings are current as of Friday, December 26, 2025 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.
Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/PwsComponents/Listings.asp?Company=C0789631&Standard=061&
NSF/ANSI/CAN 61
Drinking Water System Components - Health Effects
Drinking Water System Components - Health Effects
NOTE: Unless otherwise indicated for Materials, Certification is only for the Water Contact Material shown in the Listing. Click here for a list of Abbreviations used in these Listings. Click here for the definitions of Water Contact Temperatures denoted in these Listings. Products certified to NSF/ANSI/CAN 61 comply with the health effects criteria in NSF/ANSI/CAN 600.
| Global Aqua Technology | |
| 13963 Ramona Avenue | |
| Chino, CA 91710 | |
| United States | |
| 626-333-3336 | |
| Visit this company's website |
Facility : AAB
Mechanical Devices
| Water | Water | |||
| Contact | Contact | |||
| Trade Designation | Size | Temp | Material | |
|
Reverse Osmosis Element[1] [2] [3] [4] |
||||
| MBW-4040 | 4" x 40" | CLD 23 | MLTPL | |
| MBW-4040FR | 4" x 40" | CLD 23 | MLTPL | |
| MBW-8040-400 | 8" x 40" | CLD 23 | MLTPL | |
| MBW-8040-440 | 8" x 40" | CLD 23 | MLTPL | |
| MBW-8040FR-400/34 | 8" x 40" | CLD 23 | MLTPL | |
| MBW-8040FR-PRO | 8" x 40" | CLD 23 | MLTPL | |
| MLP-2521 | 2 1/2" x 21" | CLD 23 | MLTPL | |
| MLP-2540 | 2 1/2" x 40" | CLD 23 | MLTPL | |
| MLP-4021 | 4" x 21" | CLD 23 | MLTPL | |
| MLP-4040 | 4" x 40" | CLD 23 | MLTPL | |
| MLP-8040-400 | 8" x 40" | CLD 23 | MLTPL | |
| MLP-8040-440 | 8" x 40" | CLD 23 | MLTPL | |
| MLP-8040FR-400/34 | 8" x 40" | CLD 23 | MLTPL | |
| MSW-2521 | 2 1/2" x 21" | CLD 23 | MLTPL | |
| MSW-2540 | 2 1/2" x 40" | CLD 23 | MLTPL | |
| MSW-4021 | 4" x 21" | CLD 23 | MLTPL | |
| MSW-4040 | 4" x 40" | CLD 23 | MLTPL | |
| MSW-4040HF | 4" x 40" | CLD 23 | MLTPL | |
| MSW-8040-400 | 8" x 40" | CLD 23 | MLTPL | |
| MSW-8040-440 | 8" x 40" | CLD 23 | MLTPL | |
| MSW-8040HF-400 | 8" x 40" | CLD 23 | MLTPL | |
| MSW-8040HF-440 | 8" x 40" | CLD 23 | MLTPL | |
| XLP-4040 | 4" x 40" | CLD 23 | MLTPL | |
| XLP-8040-400 | 8" x 40" | CLD 23 | MLTPL | |
[1] Certified for both wet and dry elements.
[2] All elements (wet and dry) require a pre-service flush:
Fill the RO pressure vessel with qualified pretreated water. The feed water pressure
shall be restricted to 50 psi and the flow rate shall be equal to 16 GPM (gallons per
minute). The rejected water and product water shall be discharged completely. The
membrane element shall be flushed for 6 hours. No antiscalant shall be added in
flushing.
[3] The MSW-2521, MSW-2540, MSW-4021, MLP21-2521, MLP21-2540, MLP21-4021 elements are
evaluated for point-of-entry end uses.
[4] Certified for minimum flow rate of:
MSW-8040-400, MSW-8040HF-400, MBW-8040-400, MLP-8040-400 : 30,000 L/day
MSW-8040-440: 3500 gal/day
MSW-8040HF-440: 6300 gal/day
MSW-4040, MSW-4040HF, MBW-4040, MBW-4040FR, MLP-4040, XLP-4040: 8,000 L/day
MBW-8040-440: 7700 gal/day
MBW-8040FR-PRO, MBW-8040FR-400/34 : 7350 gal/day
MLP-8040-440: 8750 gal/day
XLP-8040-400, MLP-8040FR-400/34: 7000 gal/day
|
||||
Number of matching Manufacturers is 1
Number of matching Products is 24
Processing time was 0 seconds
