NSF Product and Service Listings

These NSF Official Listings are current as of Saturday, July 12, 2025 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.

Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/PwsComponents/Listings.asp?Company=C0835421&Standard=061&


NSF/ANSI/CAN 61
Drinking Water System Components - Health Effects

NOTE: Unless otherwise indicated for Materials, Certification is only for the Water Contact Material shown in the Listing. Click here for a list of Abbreviations used in these Listings. Click here for the definitions of Water Contact Temperatures denoted in these Listings. Products certified to NSF/ANSI/CAN 61 comply with the health effects criteria in NSF/ANSI/CAN 600.

 
Jiangsu Membrane Desalor Fluid Technology Co.,Ltd. 
No.10,group 7,Yingquan village
Caobu town,Rudong County 
Nantong, 32 226402 
China 
86 513 8190 9656
Visit this company's website


Facility : # 1 China

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Reverse Osmosis Element[1] [2]
DESALOR BW-4040 4 x 40 in CLD 23 MLTPL
DESALOR BW-4040 FR 4 x 40 in CLD 23 MLTPL
DESALOR BW-4040 HR 4 x 40 in CLD 23 MLTPL
DESALOR BW-8040 8 x 40 in CLD 23 MLTPL
DESALOR BW-8040 FR 8 x 40 in CLD 23 MLTPL
DESALOR BW-8040 HR 8 x 40 in CLD 23 MLTPL
DESALOR LP-4040 FR 4 x 40 in CLD 23 MLTPL
DESALOR LP-8040 FR 8 x 40 in CLD 23 MLTPL
DESALOR TW-4040 4 x 40 in CLD 23 MLTPL
DESALOR TW-8040 8 x 40 in CLD 23 MLTPL
DESALOR ULP-4040 4 x 40 in CLD 23 MLTPL
DESALOR ULP-4040 HR 4 x 40 in CLD 23 MLTPL
DESALOR ULP-8040 8 x 40 in CLD 23 MLTPL
DESALOR ULP-8040 HR 8 x 40 in CLD 23 MLTPL 

[1] ULP = Ultra Low Pressure
    BW = Brackish Water
    TW = Tap Water
    HR = High Resistant
    FR = Fouling Resistant
[2] Products require the following pre-service flush using tap water at a pressure not to
    exceed 50 psi:
    DESALOR ULP-4040 requires a pre-service flush at a flow rate of 4 GPM (gallons per
    minute) for 24 hours.
    DESALOR ULP-8040 requires a pre-service flush at a flow rate of 12 GPM (gallons per
    minute) for 24 hours.
    DESALOR ULP-4040-HR requires a pre-service flush at a flow rate of 4 GPM (gallons per
    minute) for 24 hours.
    DESALOR ULP-8040-HR requires a pre-service flush at a flow rate of 12 GPM (gallons per
    minute) for 24 hours.
    DESALOR ULP-4040-FR requires a pre-service flush at a flow rate of 4 GPM (gallons per
    minute) for 24 hours.
    DESALOR ULP-8040-FR requires a pre-service flush at a flow rate of 12 GPM (gallons per
    minute) for 24 hours.
    DESALOR BW-4040 requires a pre-service flush at a flow rate of 4 GPM (gallons per
    minute) for 24 hours.
    DESALOR BW-8040 requires a pre-service flush at a flow rate of 12 GPM (gallons per
    minute) for 24 hours.
    DESALOR BW-4040-HR requires a pre-service flush at a flow rate of 4 GPM (gallons per
    minute) for 24 hours.
    DESALOR BW-8040-HR requires a pre-service flush at a flow rate of 12 GPM (gallons per
    minute) for 24 hours.
    DESALOR BW-4040-FR requires a pre-service flush at a flow rate of 4 GPM (gallons per
    minute) for 24 hours.
    DESALOR BW-8040-FR requires a pre-service flush at a flow rate of 12 GPM (gallons per
    minute) for 24 hours.
    DESALOR TW-4040 requires a pre-service flush at a flow rate of 4 GPM (gallons per
    minute) for 24 hours.
    DESALOR TW-8040 requires a pre-service flush at a flow rate of 12 GPM (gallons per
    minute) for 24 hours.

Number of matching Manufacturers is 1
Number of matching Products is 14
Processing time was 0 seconds