NSF Product and Service Listings

These NSF Official Listings are current as of Friday, December 26, 2025 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.

Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/PwsComponents/Listings.asp?Company=C0836562&Standard=061&


NSF/ANSI/CAN 61
Drinking Water System Components - Health Effects

NOTE: Unless otherwise indicated for Materials, Certification is only for the Water Contact Material shown in the Listing. Click here for a list of Abbreviations used in these Listings. Click here for the definitions of Water Contact Temperatures denoted in these Listings. Products certified to NSF/ANSI/CAN 61 comply with the health effects criteria in NSF/ANSI/CAN 600.

 
Tian Jin Ai Yue Powder Coatings Co., Ltd. 
No. 188, JingChen Road, Shuangtang
High-end Hardware Products Ind Park 
Jinghai District, Tianjin 301699 
China 
86 189 2087 8759


Facility : Tianjin, China

Protective (Barrier) Materials

    Water Water
  Water Contact Contact Contact
Trade Designation Size Restriction Temp Material

Coatings - Fittings [G]
BEJ0108F[1] >= 1" D. HOT PEC 

[1] Coating Notes:
    Maximum Field Use Dry Thickness(in mils): 16 mils
    Final Cure Time/Temperature: 18 minutes at 200°C
    Colors: Blue
    Number Of Coats: 1
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

Coatings - Pipe [G]
BEJ0108F[1] >= 1" D. HOT PEC 

[1] Coating Notes:
    Maximum Field Use Dry Thickness(in mils): 16 mils
    Final Cure Time/Temperature: 18 minutes at 200°C
    Colors: Blue
    Number Of Coats: 1
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

Coatings - Pump [G]
BEJ0108F[1] >= 1" D. HOT PEC 

[1] Coating Notes:
    Maximum Field Use Dry Thickness(in mils): 16 mils
    Final Cure Time/Temperature: 18 minutes at 200°C
    Colors: Blue
    Number Of Coats: 1
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

Coatings - Tank [G]
BEJ0108F[1] >= 5 gal D. HOT PEC 

[1] Coating Notes:
    Maximum Field Use Dry Thickness(in mils): 16 mils
    Final Cure Time/Temperature: 18 minutes at 200°C
    Colors: Blue
    Number Of Coats: 1
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

Coatings - Valve [G]
BEJ0108F[1] >= 1" D. HOT PEC 

[1] Coating Notes:
    Maximum Field Use Dry Thickness(in mils): 16 mils
    Final Cure Time/Temperature: 18 minutes at 200°C
    Colors: Blue
    Number Of Coats: 1
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

Number of matching Manufacturers is 1
Number of matching Products is 5
Processing time was 0 seconds