NSF Product and Service Listings
These NSF Official Listings are current as of Friday, December 26, 2025 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.
Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/PwsComponents/Listings.asp?Company=C0841014&Standard=061&
NSF/ANSI/CAN 61
Drinking Water System Components - Health Effects
Drinking Water System Components - Health Effects
NOTE: Unless otherwise indicated for Materials, Certification is only for the Water Contact Material shown in the Listing. Click here for a list of Abbreviations used in these Listings. Click here for the definitions of Water Contact Temperatures denoted in these Listings. Products certified to NSF/ANSI/CAN 61 comply with the health effects criteria in NSF/ANSI/CAN 600.
| Mempure Pte Ltd | |
| 211 Woodlands Avenue 9 | |
| #07-83 Woodlands Spectrum II | |
| Singapore 738960 | |
| Singapore | |
| 86 22 6755 5848 | |
| Visit this company's website |
Facility : Singapore
Mechanical Devices
| Water | Water | |||
| Contact | Contact | |||
| Trade Designation | Size | Temp | Material | |
|
Nanofiltration Element[1] |
||||
| Nanopure NF3015A[2] | 7.7 x 34.7 cm | CLD 23 | MLTPL | |
| Nanopure NF4015A[3] | 11.5 x 40.1 cm | CLD 23 | MLTPL | |
| Nanopure NF6040[4] | 17 x 134 cm | CLD 23 | MLTPL | |
| Nanopure NF8040[5] | 19.5 x 131.5 cm | CLD 23 | MLTPL | |
| Nanopure NF8060A[5] | 19.5 x 185 cm | CLD 23 | MLTPL | |
[1] Products are certified for point-of-entry (POE) use.
[2] Trade Name Nanopure NF3015A requires a pre-service flush at 8 liters per minute (LPM)
for 2 hours with tap or deionized water.
[3] Trade Name Nanopure NF4015A requires a pre-service flush at 15 liters per minute (LPM)
for 2 hours with tap or deionized water.
[4] Trade Name Nanopure NF6040 requires a pre-service flush at 35 liters per minute (LPM)
for 2 hours with tap or deionized water.
[5] Trade Names Nanopure NF8060A and Nanopure NF8040 require a pre-service flush at 70
liters per minute (LPM) for 2 hours with tap or deionized water.
|
||||
Number of matching Manufacturers is 1
Number of matching Products is 5
Processing time was 0 seconds

