NSF Product and Service Listings

These NSF Official Listings are current as of Saturday, October 25, 2025 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.

Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/PwsComponents/Listings.asp?Company=C0841808&Standard=061&


NSF/ANSI/CAN 61
Drinking Water System Components - Health Effects

NOTE: Unless otherwise indicated for Materials, Certification is only for the Water Contact Material shown in the Listing. Click here for a list of Abbreviations used in these Listings. Click here for the definitions of Water Contact Temperatures denoted in these Listings. Products certified to NSF/ANSI/CAN 61 comply with the health effects criteria in NSF/ANSI/CAN 600.

 
Amchem Products Pvt. Ltd. 
Plot no. 98, ECOTECH-12,
Greater Noida West  
NOIDA, UP 201306 
India 
91-120-6857749


Facility : Noida, Uttar Pradesh, India

Protective (Barrier) Materials

    Water Water
  Water Contact Contact Contact
Trade Designation Size Restriction Temp Material

Coatings - Fittings[1]
Purethane NXT - SIP >=3" D. HOT PUR 

[1] Colors : Yellow, Light Blue, Red
    Number Of Coats: 1
    Maximium Field Use Dry Thickness (in mils): 240 mils
    Final Cure Time/Temperature: 7 days at 30°C
    Special Comments: Mix ratio of Part A:B = 1.5:1 by volume. Application is by plural
    component spray gun. Minimum mil thickness 120 mils

Coatings - Pipes[1]
Purethane NXT - SIP >=26" D. HOT PUR 

[1] Colors : Yellow, Light Blue, Red
    Number Of Coats: 1
    Maximium Field Use Dry Thickness (in mils): 240 mils
    Final Cure Time/Temperature: 7 days at 30°C
    Special Comments: Mix ratio of Part A:B = 1.5:1 by volume. Application is by plural
    component spray gun. Minimum mil thickness 120 mils

Coatings - Valve[1]
Purethane NXT - SIP >=3" D. HOT PUR 

[1] Colors : Yellow, Light Blue, Red
    Number Of Coats: 1
    Maximium Field Use Dry Thickness (in mils): 240 mils
    Final Cure Time/Temperature: 7 days at 30°C
    Special Comments: Mix ratio of Part A:B = 1.5:1 by volume. Application is by plural
    component spray gun. Minimum mil thickness 120 mils

Number of matching Manufacturers is 1
Number of matching Products is 3
Processing time was 0 seconds