NSF Product and Service Listings
These NSF Official Listings are current as of Friday, March 27, 2026 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.
Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/PwsComponents/Listings.asp?Company=C0891270&Standard=061&
NSF/ANSI/CAN 61
Drinking Water System Components - Health Effects
Drinking Water System Components - Health Effects
NOTE: Unless otherwise indicated for Materials, Certification is only for the Water Contact Material shown in the Listing. Click here for a list of Abbreviations used in these Listings. Click here for the definitions of Water Contact Temperatures denoted in these Listings. Products certified to NSF/ANSI/CAN 61 comply with the health effects criteria in NSF/ANSI/CAN 600.
| Thermo Fisher Scientific | |
| 400 Research Parkway | |
| Meriden, CT 06450 | |
| United States | |
| 651-413-3745 |
Facility : Stafford Springs, CT
Mechanical Devices
| Water | Water | |||
| Contact | Contact | |||
| Trade Designation | Size | Temp | Material | |
|
Filtration Devices/Components [G] |
||||
| Betafine XL(LC)PP(GC)(EMC)(OR)[1] [2] | 2.5" | CLD 23 | MLTPL | |
| Betapure NT(LC)T(GC)(P)(SRO)(EMC)(OR)[3] [4] | 2.65" | CLD 23 | MLTPL | |
| DF Series DFGxxxPPYZ[5] [6] [7] | 2.69" | CLD 23 | MLTPL | |
[1] Betafine XL, Betafatine XL (LC)PP(GC)(EMC)(OR) variable key:
LC: Length
9 to 40 inches
GC: Grade
002 - 0.2 MICRON
005 - 0.5 MICRON
010 - 1 MICRON
025 - 2.5 MICRON
050 - 5 MICRON
100 - 10 MICRON
200 - 20 MICRON
400 - 40 MICRON
700 - 70 MICRON
EMC: End Modification
B0 - 226 O'RINGS & SPEAR, NO REINFORCING RING
B1 - 226 O'RINGS & SPEAR, POLYSULFONE RING
B2 - 226 O'RINGS & SPEAR, STAINLESS STEEL RING
C0 - 222 O'RINGS & SPEAR, NO REINFORCING RING
C1 - 222 O'RINGS & SPEAR, POLYSULFONE RING
C2 - 222 O'RINGS & SPEAR, STAINLESS STEEL RING
D - DOUBLE OPEN END, FLAT GASKET
F0 - 222 O'RING'S & FLAT CAP, NO REINFORCING RING
F1 - 222 O'RINGS & FLAT CAP, POLYSULFONE RING
F2 - 222 O'RINGS & FLAT CAP, STAINLESS STEEL RING
R - END CAP WITH SPRING
OR: O-ring:
A - SILICONE
M - EPDM
[2] Betafine XL products require a per-service flush at a flow rate of 2 to 3 gpm (gallons
per minute) per each 10"" of length for 5 minutes with deionized water.
Betafine XL products are certified for a minimum daily filtrate generation of 1440
gallons.
[3] Betapure NT-T, BetaPure NT (LC)T(GC)(P)(EMC)(OR) variable key:
LC: Length
5 to 40 inches
GC: Grade designation
005 - 0.5 µm
010 - 1 µm
020 - 2 µm
030 - 3 µm
050 - 5 µm
100 - 10 µm
200 - 20 µm
300 - 30 µm
400 - 40 µm
500 - 50 µm
700 - 70 µm
P: Packaging option
B - Bulk
S - Standard
Z - Individual
EMC: End Modification
B - SOE, 226, O-rings / spear
C - SOE, 222 O-rings / spear
D - DOE, flat gaskets
F - SOE, 222 O-rings / Flat Cap
L - Film sealed for use in CTG Klean
M - SOE, 222 O-rings / flat cap, for 1ZMP HSG
Y - SOE, 222 single O-ring and cap
OR: Gasket/O-ring material
A - Silicone
M - EPDM
[4] Betapure NT-T, BetaPure NT (LC)T(GC)(P)(EMC)(OR) is certified for a minimum daily
filtration generation of 1440 gallons per 10"" of length.
Betapure NT-T, BetaPure NT (LC)T(GC)(P)(EMC)(OR) requires a per-service flush at 2 to 3
gallons per minute (gpm) per 10"" of length for 5 minutes.
[5] DF Series DFGxxxPPYZ size 1 requires a pre-service flush at 10 gallons per minute (gpm)
for 5 minutes with deionized water.
DF Series DFGxxxPPYZ size 2 requires a pre-service flush at 10 gallons per minute (gpm)
for 10 minutes with deionized water.
[6] DF Series DFGxxxPPYZ size 1 is certified for a minimum daily filtrate generation of
14,440 gallons.
DF Series DFGxxxPPYZ size 2 is certified for a minimum daily filtrate generation of
28,800 gallons.
[7] DF Series DFGxxxPPYZ variable key:
xxx: Micron rating
001 - 1 µm
005 - 5 µm
010 - 10 µm
025 - 25 µm
050 - 50 µm
100 - 100 µm
200 - 200 µm
Y: Cartridge length
1 - 16" nominal (1 high)
2 - 32" nominal (2 high)
Z: Connection style
C - Open-cuno standard
R - Closed-competitor
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
state laws and the U.S. Safe Drinking Water Act.
|
||||
Facility : Charlotte, NC
Mechanical Devices
| Water | Water | |||
| Contact | Contact | |||
| Trade Designation | Size | Temp | Material | |
|
Filtration Devices/Components [G] |
||||
| Liqui-Cel™ EXF-10x28 Series Membrane Contactor, x40 membrane, FRP Vessel[1] | 10" x 28" | CLD 23 | PP | |
| Liqui-Cel™ EXF-10x28 Series Membrane Contactor, x40 membrane, SS Vessel[1] | 10" x 28" | CLD 23 | PP | |
| Liqui-Cel™ EXF-10x28 Series Membrane Contactor, x50 membrane, FRP Vessel[1] | 10" x 28" | CLD 23 | PP | |
| Liqui-Cel™ EXF-10x28 Series Membrane Contactor, x50 membrane, SS Vessel[1] | 10" x 28" | CLD 23 | PP | |
| Liqui-Cel™ EXF-14x28 Series Membrane Contactor, x40 membrane[2] | 14" x 28" | CLD 23 | PP | |
| Liqui-Cel™ EXF-14x28 Series Membrane Contactor, x50 membrane[2] | 14" x 28" | CLD 23 | PP | |
| Liqui-Cel™ EXF-14x40 Series Membrane Contactor, x40 membrane[2] | 14" x 40" | CLD 23 | PP | |
| Liqui-Cel™ EXF-14x40 Series Membrane Contactor, x50 membrane[2] | 14" x 40" | CLD 23 | PP | |
| Liqui-Cel™ EXF-4x28 Series Membrane Contactor, x50 membrane[3] | 4" x 28" | CLD 23 | PP | |
[1] Trade name Liqui-Cel™ EXF-10x28 Series Membrane Contactor with x40 membrane fiber, FRP
vessel is certified for a minimum daily flow of 60,000 gallons.
Trade name Liqui-Cel™ EXF-10x28 Series Membrane Contactor with x50 membrane fiber, FRP
vessel is certified for a minimum daily flow of 60,000 gallons.
Trade name Liqui-Cel™ EXF-10x28 Series Membrane Contactor with x40 membrane fiber, SS
vessel is certified for a minimum daily flow of 60,000 gallons.
Trade name Liqui-Cel™ EXF-10x28 Series Membrane Contactor with x50 membrane fiber, SS
vessel is certified for a minimum daily flow of 60,000 gallons.
[2] Trade name Liqui-Cel™ EXF-14x28 Series Membrane Contactor with x40 membrane fiber is
certified for a minimum daily flow of 100,000 gallons.
Trade name Liqui-Cel™ EXF-14x28 Series Membrane Contactor with x50 membrane fiber is
certified for a minimum daily flow of 100,000 gallons.
Trade name Liqui-Cel™ EXF-14x40 Series Membrane Contactor with x40 Membrane fiber is
certified for a minimum daily flow generation of 144,000 gallons.
Trade name Liqui-Cel™ EXF-14x40 Series Membrane Contactor with x50 Membrane fiber is
certified for a minimum daily flow generation of 144,000 gallons.
[3] Trade name Liqui-Cel™ EXF 4X28 Series Membrane Contactor with X50 Membrane Fiber is
certified for a minimum daily flow generation of 5,760 gallons.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
state laws and the U.S. Safe Drinking Water Act.
|
||||
Facility : São Paulo, Brazil
Mechanical Devices
| Water | Water | |||
| Contact | Contact | |||
| Trade Designation | Size | Temp | Material | |
|
Filtration Devices/Components [G] |
||||
| Micro-Klean RT (LC)(GC)16(SC)(PC)(RC)(EMC)(OC)[1] [2] | 2.5" | CLD 23 | MLTPL | |
[1] Micro-Klean RT, Micro-Klean RT (LC)(GC)16(SC)(PC(RC)(EMC)(OC) variable key:
LC: Length
10 to 40 inches
GC: Grade Designation
Y - 1 µm
B - 5 µm
C - 10 µm
F - 25 µm
L - 50 µm
Q - 75 µm
CSW - 2 µm
SC: Surface
G - Grooved
U - Ungrooved
PC: Package
2 - Bulk / Polybag
3 - Polybag & Labeled
4 - Polybag & Labeled (Latina)
5 - Bulk / No Polybag
RC: Ring Support
0 - None
1 - Polysulfone
2 - Stainless steel
EMC: End Modification
B - 226 O-RING/SPEAR
C - 222 O-RING/SPEAR
F - 222 O-RING/FLAT CAP
N - DOE
P - POLYPRO CORE EXTENDER
R - CAP WITH SPRING
OC: Gasket Material
A - Silicone
E - EPDM
[2] Micro-Klean RT, Micro-Klean RT (LC)(GC)16(SC)(PC(RC)(EMC)(OC) is certified for a minimum
daily filtrate generation of 1440 gallons per 10"" of length.
Micro-Klean RT, Micro-Klean RT (LC)(GC)16(SC)(PC(RC)(EMC)(OC) requires a pre-service
flush at a flow rate of 2 to 3 gallons per minute (gpm) per 10"" of length for 5 minutes
with deionized water.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
state laws and the U.S. Safe Drinking Water Act.
|
||||
Facility : Guangzhou, China
Mechanical Devices
| Water | Water | |||
| Contact | Contact | |||
| Trade Designation | Size | Temp | Material | |
|
Filtration Devices/Components [G] |
||||
| High Flow Filter Element HF-WW-PP-XXX-Y-Z[1] [2] [3] [4] | 6.52" | CLD 23 | MLTPL | |
| High Flow Series HFM-XX-YY-ZZZ-Q[1] [2] [3] [5] | N/A | CLD 23 | MLTPL | |
| Micro-Klean RT (LC)(GC)16(SC)(PC)(RC)(EMC)(OC)[6] [7] [8] | 2.5" | CLD 23 | MLTPL | |
[1] 3M™ High Flow Series Filter Cartridges, HF-WW-PP-XXX-Y-Z is certified for a minimum
daily filtrate generation of 21,600 gallons per 10" of length.
[2] 3M™ High Flow Series Filter Cartridges, HF-WW-PP-XXX-Y-Z requires a pre-service flush at
10 gallons per minute (gpm) per 10" of length for 10 minutes with deionized water.
[3] Certified for a minimum flow rate of 65,000 L/day.
[4] WW - Length of cartridge (in inches) - 40 or 60
PP - Polypropylene
XXX - Removal rating
0005 - 0.5 micron
001 - 1 micron
002 - 2 micron
005 - 5 micron
010 - 10 micron
015 - 15 micron
025 - 25 micron
040 - 40 micron
070 - 70 micron
Y - End o-ring type
A - Silicone
B - Fluorocarbon
C - EPR
D - Nitrile
Z - Packaging option (number of filters per box) 01
- 1 pack 04 - 4 pack
[5] XX: Length 10 - 10" nominal, 40 - 40" nominal 60 - 60" nominal.
YY: Material
PP - Polypropylene
ZZZ: Micron Grade
N05=5 micron nominal
A05=5 micron absolute
A10=10 micron absolute
A20=20 micron absolute
Q - End O-ring Type
A - Silicone
D - Nitrile
[6] Micro-Klean RT, Micro-Klean RT (LC)(GC)16(SC)(PC(RC)(EMC)(OC) requires a pre-service
flush at a flow rate of 2 to 3 gallons per minute (gpm) per 10" of length for 5 minutes
with deionized water.
[7] Micro-Klean RT, Micro-Klean RT (LC)(GC)16(SC)(PC(RC)(EMC)(OC) is certified for a minimum
daily filtrate generation of 1440 gallons per 10" of length.
[8] LC denotes length (09, 10, 19, 20, 29, 30, 39, or 40); GC denotes micron rating (002,
005, 010, 025, 050, 100, 200, 400, or 700); EMC denotes end treatment (B0, B1, B2, C0,
C1, C2, D, F0, F1, or F2); OR denotes o-ring material (A, B, C, or D).
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
state laws and the U.S. Safe Drinking Water Act.
|
||||
Facility : Wuppertal, Germany
Mechanical Devices
| Water | Water | |||
| Contact | Contact | |||
| Trade Designation | Size | Temp | Material | |
|
Filtration Devices/Components [G] |
||||
| Liqui-Cel™ EXF-10x28 Series Membrane Contactor, x40 membrane, FRP Vessel[1] | 10" x 28" | CLD 23 | PP | |
| Liqui-Cel™ EXF-10x28 Series Membrane Contactor, x40 membrane, SS Vessel[1] | 10" x 28" | CLD 23 | PP | |
| Liqui-Cel™ EXF-10x28 Series Membrane Contactor, x50 membrane, FRP Vessel[1] | 10" x 28" | CLD 23 | PP | |
| Liqui-Cel™ EXF-10x28 Series Membrane Contactor, x50 membrane, SS Vessel[1] | 10" x 28" | CLD 23 | PP | |
| Liqui-Cel™ EXF-14x28 Series Membrane Contactor, x40 membrane[2] | 14" x 28" | CLD 23 | PP | |
| Liqui-Cel™ EXF-14x28 Series Membrane Contactor, x50 membrane[2] | 14" x 28" | CLD 23 | PP | |
| Liqui-Cel™ EXF-14x40 Series Membrane Contactor, x40 membrane[2] | 14" x 40" | CLD 23 | PP | |
| Liqui-Cel™ EXF-14x40 Series Membrane Contactor, x50 membrane[2] | 14" x 40" | CLD 23 | PP | |
[1] Trade name Liqui-Cel™ EXF-10x28 Series Membrane Contactor with x40 membrane fiber, FRP
vessel is certified for a minimum daily flow of 60,000 gallons.
Trade name Liqui-Cel™ EXF-10x28 Series Membrane Contactor with x50 membrane fiber, FRP
vessel is certified for a minimum daily flow of 60,000 gallons.
Trade name Liqui-Cel™ EXF-10x28 Series Membrane Contactor with x40 membrane fiber, SS
vessel is certified for a minimum daily flow of 60,000 gallons.
Trade name Liqui-Cel™ EXF-10x28 Series Membrane Contactor with x50 membrane fiber, SS
vessel is certified for a minimum daily flow of 60,000 gallons
[2] Trade name Liqui-Cel™ EXF-14x28 Series Membrane Contactor with x40 membrane fiber is
certified for a minimum daily flow of 100,000 gallons.
Trade name Liqui-Cel™ EXF-14x28 Series Membrane Contactor with x50 membrane fiber is
certified for a minimum daily flow of 100,000 gallons.
Trade name Liqui-Cel™ EXF-14x40 Series Membrane Contactor with x40 Membrane fiber is
certified for a minimum daily flow of 144,000 gallons.
Trade name Liqui-Cel™ EXF-14x40 Series Membrane Contactor with x50 Membrane fiber is
certified for a minimum daily flow of 144,000 gallons.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
state laws and the U.S. Safe Drinking Water Act.
|
||||
Facility : Nuevo Léon, Mexico
Mechanical Devices
| Water | Water | |||
| Contact | Contact | |||
| Trade Designation | Size | Temp | Material | |
|
Filtration Devices/Components [G] |
||||
| 3M™ 740 Series Filter Cartridges, 740-Q-RR-SS-XXX-Y-Z[1] [2] [3] | 6.52" | CLD 23 | MLTPL | |
| High Flow Filter Element HF-WW-PP-XXX-Y-Z[4] [5] | N/A | CLD 23 | MLTPL | |
| High Flow Series HFM-XX-YY-ZZZ-Q[4] [6] | N/A | CLD 23 | MLTPL | |
| Micro-Klean RT (LC)(GC)16(SC)(PC)(RC)(EMC)(OC)[7] [8] [9] | 2.5" | CLD 23 | MLTPL | |
| Micro-Klean RW (XX)(X17)(A)(B)0(C)(D)[10] [11] | 2.5" | CLD 23 | MLTPL | |
[1] 3M™ High Flow HFM Series Filter Cartridges, 740-Q-RR-SS-XXX-Y-Z is certified for a
minimum daily filtrate generation of 27,000 gallons per 30" of length.
[2] 3M™ High Flow HFM Series Filter Cartridges, 740-Q-RR-SS-XXX-Y-Z 30" requires a
pre-service flush at 10 gallons per minute (GPM) for 10 minutes.
3M™ High Flow HFM Series Filter Cartridges, 740-Q-RR-SS-XXX-Y-Z 40"" requires a
pre-service flush at 10 gallons per minute (GPM) for 15 minutes.
[3] 3M™ High Flow HFM Series Filter Cartridges, 740-Q-RR-SS-XXX-Y-Z variable key:
Q: Construction
B - Standard
K - Reduced filter area
RR: Length
30 - 30 nominal
40 - 40 nominal
SS: Material
PP - Polypropylene
EE - Polyester
XXX: Micron rating:
001 - 1 um
002 - 2 um
005 - 5 um
010 - 10 um
015 - 15 um
Y: Gasket material
A - Silicone
C - EPDM
Z: Packaging
1 - 1/case
2 - 30/case
3 - 37/case
[4] 3M™ High Flow Series Filter Cartridges, HF-WW-PP-XXX-Y-Z & 3M™ High Flow HFM Series
Filter Cartridges, HFM-XX-YY-ZZZ-Q are certified for a minimum daily filtrate generation
of 21,600 gallons per 10" of length.
3M™ High Flow Series Filter Cartridges, HF-WW-PP-XXX-Y-Z & 3M™ High Flow HFM Series
Filter Cartridges, HFM-XX-YY-ZZZ-Q requires a pre-service flush at 10 gallons per minute
(gpm) per 10" of length for 10 minutes with deionized water.
[5] 3M™ High Flow Series Filter Cartridges, HF-WW-PP-XXX-Y-Z variable key:
WW: Length
10 - 10" nominal
40 - 40" nominal
60 - 60" nominal
XXX: Grade
001 - 1 um
002 - 2 um
005 - 5 um
010 - 10 um
015 - 15 um
025 - 25 um
040 - 40 um
070 - 70 um
Y: O-ring material
A: Silicone
B: Fluorocarbon
C: EPR
D: Nitrile
Z: Packaged quantity
01 - single pack
[6] 3M™ High Flow HFM Series Filter Cartridges, HFM-XX-YY-ZZZ-Q key:
XX: Length
10 - 10" nominal
40 - 40" nominal
60 - 60" nominal
YY: Construction
PP - Polypropylene
ZZZ: Grade
N05 - 5 micron nominal (70 micron absolute)
A05 - 5 micron absolute
A10 - 10 micron absolute
A20 - 20 micron absolute
A40 - 40 micron absolute
[7] LC: Length
10 to 40 inches
GC: Grade Designation
Y - 1 µm
B - 5 µm
C - 10 µm
F - 25 µm
L - 50 µm
Q - 75 µm
CSW - 2 µm
SC: Surface
G - Grooved
U - Ungrooved
PC: Package
2 - Bulk / Polybag
3 - Polybag & Labeled
4 - Polybag & Labeled (Latina)
5 - Bulk / No Polybag
RC: Ring Support
0 - None
1 - Polysulfone
2 - Stainless steel
EMC: End Modification
B - 226 O-RING/SPEAR
C - 222 O-RING/SPEAR
F - 222 O-RING/FLAT CAP
N - DOE
P - POLYPRO CORE EXTENDER
R - CAP WITH SPRING
OC: Gasket Material
A - Silicone
E - EPDM
[8] Micro-Klean RT, Micro-Klean RT (LC)(GC)16(SC)(PC(RC)(EMC)(OC) is certified for a minimum
daily filtrate generation of 1440 gallons per 10" of length.
[9] Micro-Klean RT, Micro-Klean RT (LC)(GC)16(SC)(PC(RC)(EMC)(OC) requires a pre-service
flush at a flow rate of 2 to 3 gallons per minute (gpm) per 10" of length for 5 minutes
with deionized water.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
state laws and the U.S. Safe Drinking Water Act.
[10] Micro-Klean RW, Micro-Klean RW(XX)(X17)(A)(B)0(C)(D) variable key:
XX: Length
10 to 40 inches
X: Grade Designation
Y - 1 µm
B - 5 µm
A: Surface
G - Grooved
B: Package
2 - Bulk / Polybag
C: End Modification
C - 222 O-RING/SPEAR
F - 222 O-RING/FLAT CAP
N - DOE
1 - 222 O-RING/ PLASTIC SPRING
R - PLASTIC SPRING
D: Gasket
A - Silicone
N - None
[11] Micro-Klean RW, Micro-Klean RW(XX)(X17)(A)(B)0(C)(D) is certified for a minimum daily
filtrate generation of 1440 gallons per 10" of length.
Micro-Klean RW, Micro-Klean RW(XX)(X17)(A)(B)0(C)(D) requires a pre-service flush at a
flow rate of 2 to 3 gallons per minute (gpm) per 10" of length for 5 minutes with
deionized water.
|
||||
Facility : Kwidzynska, Poland
Mechanical Devices
| Water | Water | |||
| Contact | Contact | |||
| Trade Designation | Size | Temp | Material | |
|
Filtration Devices/Components [G] |
||||
| Micro-Klean RT (LC)(GC)16(SC)(PC)(RC)(EMC)(OC)[1] [2] | N/A | CLD 23 | MLTPL | |
[1] Micro-Klean RT, Micro-Klean RT (LC)(GC)16(SC)(PC(RC)(EMC)(OC) variable key:
LC: Length
10 to 40 inches
GC: Grade Designation
Y - 1 µm
B - 5 µm
C - 10 µm
F - 25 µm
L - 50 µm
Q - 75 µm
CSW - 2 µm
SC: Surface
G - Grooved
U - Ungrooved
PC: Package
2 - Bulk / Polybag
3 - Polybag & Labeled
4 - Polybag & Labeled (Latina)
5 - Bulk / No Polybag
RC: Ring Support
0 - None
1 - Polysulfone
2 - Stainless steel
EMC: End Modification
B - 226 O-RING/SPEAR
C - 222 O-RING/SPEAR
F - 222 O-RING/FLAT CAP
N - DOE
P - POLYPRO CORE EXTENDER
R - CAP WITH SPRING
OC: Gasket Material
A - Silicone
E - EPDM
[2] Micro-Klean RT, Micro-Klean RT (LC)(GC)16(SC)(PC(RC)(EMC)(OC) is certified for a minimum
daily filtrate generation of 1440 gallons per 10" of length.
Micro-Klean RT, Micro-Klean RT (LC)(GC)16(SC)(PC(RC)(EMC)(OC) requires a pre-service
flush at a flow rate of 2 to 3 gallons per minute (gpm) per 10" of length for 5 minutes
with deionized water.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
state laws and the U.S. Safe Drinking Water Act.
|
||||
Number of matching Manufacturers is 1
Number of matching Products is 30
Processing time was 0 seconds
