NSF Product and Service Listings

[1] Configurations include:
        
    Swan Neck PN20
    SOP 20 A20 (20 x 20 mm)
    SOP 25 A20 (25 x 25 mm)
    SOP 32 A20 (32 x 32 mm)
         
    Swan Neck Female - Female PN25
    SFF 2020 (20 x 20 mm)
    SFF 2525 (25 x 25 mm)
      
    Swan Neck Short Female - Female PN25
    SFC 2020 (20 x 20 mm)
    SFC 2525 (25 x 25 mm) 
       
    Socket PN25
    MAN 20 (20 x 20 mm)
    MAN 25 (25 x 25 mm)
    MAN 32 (32 x 32 mm)
    MAN 40 (40 x 40 mm)
    MAN 50 (50 x 50 mm)
    MAN 63 (63 x 63 mm)
    MAN 75 (75 x 75 mm)
    MAN 90 (90 x 90 mm)
    MAN 110 (110 x 110 mm)
    MAN 125 (125 x 125 mm)
    MAN 160 (160 x 160 mm)
    
    90° Elbow PN25
    CUV 20 (20 x 20 mm)
    CUV 25 (25 x 25 mm)
    CUV 32 (32 x 32 mm)
    CUV 40 (40 x 40 mm)
    CUV 50 (50 x 50 mm)
    CUV 63 (63 x 63 mm)
    CUV 75 (75 x 75 mm)
    CUV 90 (90 x 90 mm)
    CUV 110 (110 x 110 mm)
    CUV 125 (125 x 125 mm)
    CUV 160 (160 x 160 mm)
    CUV 160 T (160 x 160 mm)
    CUV 200 T (200 x 200 mm)
    CUV 250 T (250 x 250 mm)
        
    45° Elbow PN25
    CUQ 20 (20 x 20 mm)
    CUQ 25 (25 x 25 mm)
    CUQ 32 (32 x 32 mm)
    CUQ 40 (40 x 40 mm)
    CUQ 50 (50 x 50 mm)
    CUQ 63 (63 x 63 mm)
    CUQ 75 (75 x 75 mm)
    CUQ 90 (90 x 90 mm)
    CUQ 110 (110 x 110 mm)
    CUQ125 (125 x 125 mm)
    CUQ 160 (160 x 160 mm)
    CUQ 160 T (160 x 160 mm)
    CUQ 200 T (200 x 200 mm)
    CUQ 250 T (250 x 250 mm)
      
    90° Elbow M/F PN25
    CMF 20 (20 x 20 mm)
    CMF 25 (25 x 25 mm)
      
    Reduced 90° Elbow PN25
    CUR 2520 (25 x 20 mm)
    CUR 3220 (32 x 20 mm)
    CUR 3225 (32 x 25 mm)
      
    Reducing Bush M/F PN25
    RDZ 2520 (25 x 20 mm)
    RDZ 3220 (32 x 20 mm)
    RDZ 3225 (32 x 25 mm)
    RDZ 4020 (40 x 20 mm)
    RDZ 4025 (40 x 25 mm)
    RDZ 4032 (40 x 32 mm)
    RDZ 5020 (50 x 20 mm)
    RDZ 5025 (50 x 25 mm)
    RDZ 5032 (50 x 32 mm)
    RDZ 5040 (50 x 40 mm)
    RDZ 6320 (63 x 20 mm)
    RDZ 6325 (63 x 25 mm)
    RDZ 6332 (63 x 32 mm)
    RDZ 6340 (63 x 40 mm)
    RDZ 6350 (63 x 50 mm)
       
    Reducing Bush F/F PN25
    RDF 2520 (25 x 20 mm)
    RDF 3220 (32 x 20 mm)
    RDF 3225 (32 x 25 mm)
    RDF 4020 (40 x 20 mm)
    RDF 4025 (40 x 25 mm)
    RDF 4032 (40 x 32 mm)
    RDF 5020 (50 x 20 mm)
    RDF 5025 (50 x 25 mm)
    RDF 5032 (50 x 32 mm)
    RDF 5040 (50 x 40 mm)
    RDF 6320 (63 x 20 mm)
    RDF 6325 (63 x 25 mm)
    RDF 6332 (63 x 32 mm)
    RDF 6340 (63 x 40 mm)
    RDF 6350 (63 x 50 mm)
    RDF 7540 (75 x 40 mm)
    RDF 7550 (75 x 50 mm)
    RDF 7563 (75 x 63 mm)
    RDF 9050 (90 x 50 mm)
    RDF 9063 (90 x 63 mm)
    RDF 9075 (90 x 75 mm)
    RDF 11063 (110 x 63 mm)
    RDF 11075 (110 x 75 mm)
    RDF 11090 (110 x 90 mm)
    RDF 125110 (125 x 110 mm)
    RDF 160110 (160 x 110 mm)
    RDF 160125 (160 x 125 mm)
    RDT 200 160 (200 x 160 mm)
    RDT 250 200 (250 x 200 mm)
    RDT 250 160 (250 x 160 mm)
    
    Cap PN25
    TAC 20 (20 mm)
    TAC 25 (25 mm)
    TAC 32 (32 mm)
    TAC 40 (40 mm)
    TAC 50 (50 mm)
    TAC 63 (63 mm)
    TAC 75 (75 mm)
    TAC 90 (90 mm)
    TAC 110 (110 mm)
    TAC 125 (125 mm)
    TAC 160 T (160 mm)
    TAC 200 T (200 mm)
    TAC 250 T (250 mm)
       
    Tee PN25
    TEN 20 (20 x 20 x 20 mm)
    TEN 25 (25 x 25 x 25 mm)
    TEN 32 (32 x 32 x 32 mm)
    TEN 40 (40 x 40 x 40 mm)
    TEN 50 (50 x 50 x 50 mm)
    TEN 63 (63 x 63 x 63 mm)
    TEN 75 (75 x 75 x 75 mm)
    TEN 90 (90 x 90 x 90 mm)
    TEN 110 (110 x 110 x 110 mm)
    TEN 125 (125 x 125 x 125 mm)
    TEN 160 (160 x 160 x 160 mm)
    TEN 160 T (160 x 160 x 160 mm)
    TEN 200 T (200 x 200 x 200 mm)
    TEN 250 T (250 x 250 x 250 mm)
    
    Reducing Tee PN25
    TER 2520 (25 x 20 x 25 mm)
    TER 2521 (25 x 20 x 20 mm)
    TER 3220 (32 x 20 x 32 mm)
    TER 3225 (32 x 25 x 32 mm)
    TER 4020 (40 x 20 x 40 mm)
    TER 4025 (40 x 25 x 40 mm)
    TER 4032 (40 x 32 x 40 mm)
    TER 5020 (50 x 20 x 50 mm)
    TER 5025 (50 x 25 x 50 mm)
    TER 5032 (50 x 32 x 50 mm)
    TER 5040 (50 x 40 x 50 mm)
    TER 6320 (63 x 20 x 63 mm)
    TER 6325 (63 x 25 x 63 mm)
    TER 6332 (63 x 32 x 63 mm)
    TER 6340 (63 x 40 x 63 mm)
    TER 6350 (63 x 50 x 63 mm)
    TER 7540 (75 x 40 x 75 mm)
    TER 7550 (75 x 50 x 75 mm)
    TER 7563 (75 x 63 x 75 mm)
    TER 9050 (90 x 50 x 90 mm)
    TER 9063 (90 x 63 x 90 mm)
    TER 9075 (90 x 75 x 90 mm)
    TER 11063 (110 x 63 x 110 mm)
    TER 11075 (110 x 75 x 110 mm)
    TER 11090 (110 x 90 x 110 mm)
    TER 125110 (125 x 110 x 125 mm)
    TER 160110 (160 x 110 x 160 mm)
       
    Cross PN25
    TEQ 20 (20 x 20 x 20 x 20 mm)
        
    Union PN10
    UNI 2020 (20 x 20 mm)
    UNI 2525 (25 x 25 mm)
    UNI 3232 (32 x 32mm)
    UNI 4040 (40 x 40 mm)
    UNI 5050 (50 x 50 mm)
    UNI 6363 (63 x 63 mm)
[2] Stub End
    CTL 32 (32 mm)
    CTL 40 (40 mm)
    CTL 50 (50 mm)
    CTL 63 (63 mm)
    CTL 75 (75 mm)
    CTL 90 (90 mm)
    CTL 110 (110 mm)
    CTL 125 (125 mm)
    CTL 160 (160 mm)
    CTL 160 T (160 mm)
    CTL 200 T (200 mm)
    CTL 250 T (250 mm)
       
    Electrofusion Socket
    MAE 63 (63 x 63 mm)
    MAE 75 (75 x 75 mm)
    MAE 90 (90 x 90 mm)
    MAE 110 (110 x 110 mm)
    MAE 125 (125 x 125 mm)
    MAE 160 (160 x 160 mm)
    MAE 200 (200 x 200 mm)
    MAE 250 (250 x 250 mm)
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[3] Configurations include:
        
    Male Adapter Threaded Female PN25
    GFF 3220 (32 mm x 1/2")
        
    90° Threaded Elbow PN25 - Female
    CFF 2020 (20 mm x 1/2")
    CFF 2025 (20 mm x 3/4")
    CFF 2520 (25 mm x 1/2")
    CFF 2525 (25 mm x 3/4")
    CFF 3225 (32 mm x 3/4")
    CFF 3232 (32 mm x 1")
        
    90° Threaded Elbow PN25 - Male
    CFM 2020 (20 mm x 1/2")
    CFM 2025 (20 mm x 3/4")
    CFM 2520 (25 mm x 1/2")
    CFM 2525 (25 mm x 3/4")
    CFM 3225 (32 mm x 3/4")
    CFM 3232 (32 mm x 1")
        
    90° Long Threaded Elbow PN25 - Female
    CFL 2020 (20 mm x 1/2")
    CFL 2520 (25 mm x 1/2")
       
    90° Threaded Elbow with Bracket PN25 - Female
    FFS 2020 (20mm x 1/2")
    FFS 2520 (25 mm x 1/2")
    
    90° Threaded Elbow with Bracket PN25 - Male
    FMS 2020 (20 mm x 1/2")
    FMS 2520 (25 mm x 1/2")
       
    90° Threaded Elbow PN25 - Female with Male
    CCF 2020 (20 mm x 1/2")
       
    90° Threaded Elbow PN25 - Male with Male
    CCM 2020 (20 mm x 1/2")
        
    Threaded Tee PN25 - Female
    TEF 2020 (20 mm x 1/2" x 20 mm)
    TEF 2025 (20 mm x 3/4" x 20 mm)
    TEF 2520 (25 mm x 1/2" x 25 mm)
    TEF 2525 (25 mm x 3/4" x 25 mm)
    TEF 3225 (32 mm x 3/4" x 32 mm)
    TEF 3232 (32 mm x 1" x 32 mm)
       
    Threaded Tee PN25 - Male
    TEM 2020 (20 mm x 1/2" x 20 mm)
    TEM 2025 (20 mm x 3/4" x 20 mm)
    TEM 2520 (25 mm x 1/2" x 25 mm)
    TEM 2525 (25 mm x 3/4" x 25 mm)
    TEM 3225 (32 mm x 3/4" x 32 mm)
    TEM 3232 (32 mm x 1" x 32 mm)
    
    Threaded Coupling PN25 - Female
    RFF 2020 (20 mm x 1/2")
    RFF 2025 (20 mm x 3/4")
    RFF 2520 (25 mm x 1/2")
    RFF 2525 (25 mm x 3/4")
    RFF 3225 (32 mm x 3/4")
    RFF 3232 (32 mm x 1")
    RFF 4040 (40 mm x 1-1/4")
    RFF 5050 (50 mm x 1-1/2")
    RFF 6363 (63 mm x 2")
    RFF 7575 (75 mm x 2-1/2")
    RFF 9090 (90 mm x 3")
    RFF 110110 (110 mm x 4")
    
    Threaded Coupling PN25 - Male
    RFM 2020 (20 mm x 1/2")
    RFM 2025 (20 mm x 3/4")
    RFM 2520 (25 mm x 1/2")
    RFM 2525 (25 mm x 3/4")
    
    Fixed Wall Assembly Group
    GVF 2020 (20 mm x 1/2")
    GVF 2520 (25 mm x 1/2")
        
    Brass Adapter PN25 - Female
    GGF 2020 (20 mm x 1/2")
    GGF 2525 (25 mm x 3/4")
    GGF 3232 (32 mm x 1")
    GGF 4040 (40 mm x 1-1/4")
    GGF 5050 (50 mm x 1-1/2")
    GGF 6363 (63 mm x 2")
       
    Brass Adapter PN25 - Male
    GGM 2020 (20 mm x 1/2")
    GGM 2525 (25 mm x 3/4")
    GGM 3232 (32 mm x 1")
    GGM 4040 (40 mm x 1-1/")
    GGM 5050 (50 mm x 1-1/2")
    GGM 6363 (63 mm x 2")
    RFM 3225 (32 mm x 3/4")
    RFM 3232 (32 mm x 1")
    RFM 4040 (40 mm x 1-1/4")
    RFM 5050 (50 mm x 1-1/2")
    RFM 6363 (63 mm x 2")
    RFM 7575 (75 mm x 2-1/2")
    RFM 9090 (90 mm x 3")
    RFM 110110 (110 mm x 4")
       
    Wall Assembly Group
    GVS 2020 (1/2" x 1/2")
        
    Wall Assembly Group with Template
    GVD 2020 (20 mm x 1/2")
    GVD 2520 (25 mm x 1/2")
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[4] Pipe models include:
    
    FIBER Pipe
    TUB 20 SDR6 F
    TUB 25 SDR6 F
    
    FIBER EVO Pipe
    TUB 32 SDR9 FE
    TUB 40 SDR9 FE
    TUB 50 SDR9 FE
    TUB 63 SDR9 FE
    TUB 75 SDR9 FE
    TUB 90 SDR9 FE
    TUB 110 SDR9 FE
    TUB 125 SDR9 FE
    TUB 160 SDR9 FE
    TUB 200 SDR9 FE
    TUB 250 SDR9 FE
    TUB 20 SDR7.4 FE
    TUB 25 SDR7.4 FE
    TUB 32 SDR7.4 FE
    TUB 40 SDR7.4 FE
    TUB 50 SDR7.4 FE
    TUB 63 SDR7.4 FE
    TUB 75 SDR7.4 FE
    TUB 90 SDR7.4 FE
    TUB 110 SDR7.4 FE
    TUB 125 SDR7.4 FE
    TUB 160 SDR7.4 FE
    TUB 200 SDR7.4 FE
    TUB 250 SDR7.4 FE
    TUB 32 SDR11 FE
    TUB 40 SDR11 FE
    TUB 50 SDR11 FE
    TUB 63 SDR11 FE
    TUB 75 SDR11 FE
    TUB 90 SDR11 FE
    TUB 110 SDR11 FE
    TUB 125 SDR11 FE
    TUB 160 SDR11 FE
    TUB 200 SDR11 FE
    TUB 250 SDR11 FE
    TUB 160 SDR17 FE
    TUB 200 SDR17 FE
    TUB 250 SDR17 FE
      
    PPR Pipe
    TUB X A10 - PN10 - SDR11/S5 (20 – 63 mm)
    TUB X A16 - PN16 - SDR7.4/S3.2 (20 – 63 mm)
    TUB X A20 - PN20 - SDR6/S2.5 (20 – 63 mm)
      
    EvO Pipe
    TUB X A10 E - PN10 - SDR17/S8 (75 – 250 mm)
    TUB X A16 E - PN16 - SDR11/S5 (75 – 250 mm)
    TUB X A20 E - PN20 - SDR7.4/S3.2 (75 – 160 mm)
    TUB X A20 E - PN20 - SDR9/S4 (200 – 250 mm)
    TUB X A25 E - PN25 - SDR6/S2.5 (20 – 160 mm)
      
    X corresponds to the size in mm.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[5] Certified for a maximum of 4 ports.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] Only products bearing the NSF Mark on the product, product packaging, and/or
    documentation shipped with the product are Certified.
[2] Certification requested for the following configurations:
    
    Coupler (Hub x Hub)
    BP9510510 (20 mm)	
    BP9510513 (25 mm)	
    BP9510516 (32 mm)	
    BP9510519 (40 mm)	
    BP9510522 (50 mm)	
    BP9510525 (63 mm)	
    BP9510528 (75 mm)	
    BP9510531 (90 mm)	
    BP9510534 (110 mm)	
    BP9510537 (125 mm)	
    BP9510540 (160 mm)
    
    Elbow 45° (Hub x Hub)
    BP9514610 (20 mm)	
    BP9514613 (25 mm)	
    BP9514616 (32 mm)	
    BP9514619 (40 mm)	
    BP9514622 (50 mm)	
    BP9514625 (63 mm)	
    BP9514628 (75 mm)	
    BP9514629 (90 mm)	
    BP9514630 (110 mm)	
    BP9514637 (125 mm)	
    BP9514640 (160 mm)
    
    Elbow 90° (Hub x Hub)
    BP9514010 (20 mm)	
    BP9514013 (25 mm)	
    BP9514016 (32 mm)	
    BP9514019 (40 mm)	
    BP9514022 (50 mm)	
    BP9514025 (63 mm)	
    BP9514028 (75 mm)	
    BP9514031 (90 mm)	
    BP9514034 (110 mm)	
    BP9514037 (125 mm)	
    BP9514040 (160 mm)
    
    Equal Tee (Hub x Hub x Hub)
    BP9515510 (20 mm)	
    BP9515513 (25 mm)	
    BP9515516 (32 mm)	
    BP9515519 (40 mm)	
    BP9515522 (50 mm)	
    BP9515525 (63 mm)	
    BP9515528 (75 mm)	
    BP9515531 (90 mm)	
    BP9515534 (110 mm)	
    BP9515537 (125 mm)	
    BP9515540 (160 mm)
    
    End Cap
    BP9522310-1 (20 mm)	
    BP9522313-1 (25 mm)	
    BP9522316-1 (32 mm)	
    BP9522319-1 (40 mm)	
    BP9522322-1 (50 mm)	
    BP9522325-1 (63 mm)
    BP9522328-1 (75 mm)	
    BP9522331-1 (90 mm)	
    BP9522334-1 (110 mm)	
    BP9522370-1 (125 mm)
    BP9522340-1 (160 mm)
    
    Reducer (Hub x Hub)
    BP9511113 (25 mm x 20 mm)	
    BP9511116 (32 mm x 20 mm)	
    BP9511119 (40 mm x 20 mm)	
    BP9511216 (32 mm x 25 mm)	
    BP9511219 (40 mm x 25 mm)	
    BP9511222 (50 mm x 25 mm)	
    BP9511319 (40 mm x 32 mm)	
    BP9511322 (50 mm x 32 mm)	
    BP9511325 (63 mm x 32 mm)	
    BP9511422 (50 mm x 40 mm)	
    BP9511425 (63 mm x 40 mm)	
    BP9511428 (75 mm x 40 mm)	
    BP9511525 (63 mm x 50 mm)	
    BP9511528 (75 mm x 50 mm)	
    BP9511531 (90 mm x 50 mm)	
    BP9511628 (75 mm x 63 mm)	
    BP9511631 (90 mm x 63 mm)	
    BP9511731 (90 mm x 75 mm)	
    BP9511818 (110 mm x 50 mm)	
    BP9511821 (110 mm x 63 mm)	
    BP9511828 (110 mm x 75 mm)	
    BP9511831 (110 mm x 90 mm)	
    BP9511840 (160 mm x 110 mm)	
    BP9511841 (160 mm x 125 mm)	
    BP9511835 (125 mm x 110 mm)
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] Only products bearing the NSF Mark on the product, product packaging, and/or
    documentation shipped with the product are Certified.
[3] Certification includes:
    SDR6 Pipe	
    BP9506010 (20 mm)	
    BP9506013 (25 mm)	
    BP9506016 (32 mm)	
    BP9506019 (40 mm)	
    BP9506022 (50 mm)	
    BP9506025 (63 mm)	
    BP9506028 (75 mm)	
    BP9506031 (90 mm)	
    BP9506034 (110 mm)	
    BP9506036 (125 mm)	
    BP9506040 (160 mm)	
    	
    SDR 7.4 Pipe	
    BP9504010 (20 mm)	
    BP9504013 (25 mm)	
    BP9504016 (32 mm)	
    BP9504019 (40 mm)	
    BP9504022 (50 mm)	
    BP9504025 (63 mm)	
    BP9504028 (75 mm)	
    BP9504031 (90 mm)	
    BP9504034 (110 mm)	
    BP9504036 (125 mm)	
    BP9504040 (160 mm)
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] Only products bearing the NSF Mark on the product, product packaging, and/or
    documentation shipped with the product are Certified.
[2] The following models are requested for certification:
    
    Coupler (Hub x Hub)
    AT6554020 (20 mm)
    AT6554025 (25 mm)
    AT6554032 (32 mm)
    AT6554040 (40 mm)
    AT6554050 (50 mm)
    AT6554063 (63 mm)
    AT6554075 (75 mm)
    AT6554090 (90 mm)
    AT6554110 (110 mm)
    AT6554125 (125 mm)
    AT6554160 (160 mm)
    
    Elbow 45° (Hub x Hub)
    AT6556020 (20 mm)
    AT6556025 (25 mm)
    AT6556032 (32 mm)
    AT6556040 (40 mm)
    AT6556050 50 mm)
    AT6556063 (63 mm)
    AT6556075 (75 mm)
    AT6556090 (90 mm)
    AT6556110 (110 mm)
    AT6556125 (125 mm)
    AT6556160 (160 mm)
    
    Elbow 90° (Hub x Hub)
    AT6555020 (20 mm)
    AT6555025 (25 mm)
    AT6555032 (32 mm)
    AT6555040 (40 mm)
    AT6555050 (50 mm)
    AT6555063 (63 mm)
    AT6555075 (75 mm)
    AT6555090 (90 mm)
    AT6555110 (110 mm)
    AT6555125 (125 mm)
    AT6555160 (160 mm)
    
    Equal Tee (Hub x Hub x Hub)
    AT6557020 (20 mm)
    AT6557025 (25 mm)
    AT6557032 (32 mm)
    AT6557040 (40 mm)
    AT6557050 (50 mm)
    AT6557063 (63 mm)
    AT6557075 (75 mm)
    AT6557090 (90 mm)
    AT6557110 (110 mm)
    AT6557125 (125 mm)
    AT6557160 (160 mm)
    
    End Cap
    AT6665020 (20 mm)
    AT6665025 (25 mm)
    AT6665032 (32 mm)
    AT6665040 (40 mm)
    AT6665050 (50 mm)
    AT6665063 (63 mm)
    AT6665075 (75 mm)
    AT6665090 (90 mm)
    AT6665110 (110 mm)
    AT6665125 (125 mm)
    AT6665160 (160 mm)
    
    Reducer (Hub x Hub)
    AT6563220 (32mm x 20 mm)
    AT6563225 (32mm x 25 mm)
    AT6564025 (40mm x 25mm)
    AT6565025 (50mm x 25mm)
    AT6564032 (40mm x 32 mm)
    AT6565032 (50mm x 32mm)
    AT6566332 (63mm x 32mm)
    AT6565040 (50mm x 40mm)
    AT6566340 (63mm x 40mm)
    AT6567540 (75mm x 40mm)
    AT6566350 (63mm x 50mm)
    AT6567550 (75mm x 50mm)
    AT6569040 (90mm x 40mm)
    AT6569050 (90mm x 50mm)
    AT6567563 (75mm x 63mm)
    AT6569063 (90mm x 63mm)
    AT6569075 (90mm x 75mm)
    AT6561075 (REDUCER 110/75mm)
    AT6561090 (REDUCER 110/90mm)
    AT6561210 (REDUCER 125/110mm)
    AT6561610 (REDUCER 160/110mm)
    AT6561612 (REDUCER 160/125mm)
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] Only products bearing the NSF Mark on the product, product packaging, and/or
    documentation shipped with the product are Certified.
[3] The following sizes are requested for certification:
    
    SDR6 Pipe
    AT6612025 (20 mm x 3.4 mm)
    AT6612525 (25 mm x 4.2 mm)
    AT6613225 (32 mm x 5.4 mm)
    AT6614025 (40 mm x 6.7 mm)
    AT6615025 (50 mm x 8.3 mm)
    AT6616325 (63 mm x 10.5 mm)
    AT6617525 (75 mm x 12.5 mm)
    AT6619025 (90 mm x 15.0 mm)
    AT6601025 (110 mm x 18.3 mm)
    AT6601225 (125 mm x 20.8 mm)
    AT6601625 (160 mm x 26.6 mm)
    
    SDR 7.4 Pipe
    AT6612020 (20 mm x 2.8 mm)
    AT6612520 (25 mm x 3.5 mm)
    AT6613220 (32 mm x 4.4 mm)
    AT6614020 (40 mm x 5.5 mm)
    AT6615020 (50 mm x 6.9 mm)
    AT6616320 (63 mm x 8.6 mm)
    AT6617520 (75 mm x 10.3 mm)
    AT6619020 (90 mm x 12.3 mm)
    AT6601020 (110 mm x 15.1 mm)
    AT6601620 (160 mm x 21.9 mm)
[4] The following sizes are requested for certification:
    
    SDR6 Pipe
    AT6602020 (20 mm x 3.4 mm)
    AT6602520 (25 mm x 4.2 mm)
    AT6603220 (32 mm x 5.4 mm)
    AT6604020 (40 mm x 6.7 mm)
    AT6605020 (50 mm x 8.3 mm)
    AT6606320 (63 mm x 10.5 mm)
    AT6607520 (75 mm x 12.5 mm)
    AT6609020 (90 mm x 15.0 mm)
    AT6601020 (110 mm x 18.3 mm)
    AT6601220 (125 mm x 17.1 mm)
    AT6601620 (160 mm x 26.6 mm)
    
    SDR 7.4 Pipe
    AT6602016 (20 mm x 2.8 mm)
    AT6602516 (25 mm x 3.5 mm)
    AT6603216 (32 mm x 4.4 mm)
    AT6604016 (40 mm x 5.5 mm)
    AT6605016 (50 mm x 6.9 mm)
    AT6606316 (63 mm x 8.6 mm)
    AT6607516 (75 mm x 10.3 mm)
    AT6609016 (90 mm x 12.3 mm)
    AT6601016 (110 mm x 15.1 mm)
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[4] Only products bearing the NSF Mark are Certified.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] Certification limited for a maximum surface area to volume ratio of 235 sq. in./L.

[1] Certified for standard dimensions ratios of 7 and 11, the sizes shown represent the pipe
    outer diameter.
[2] Chem Proline® 20-315 mm pipe is Certified for standard dimension ratios of 7 and 11.
    400-2250 mm pipe is Certified
    for standard dimension ratios of 11, 17, 33, and 41.
[3] Chem Proline®  is a single wall PE pipe.
    Chem Prolok®  is a double wall piping system with an inner PE pipe and an outer PE pipe
    supported by centralizer discs.
    PE Polyflo® pipe is a double wall piping system with an inner PE pipe and ribs and an
    outer PE pipe co-extruded as a double walled pipe.
    PP-R Polyflo® pipe is double wall piping system with an inner PP pipe and ribs and an
    outer PP pipe co-extruded as a double walled pipe.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] Certified for a maximum surface area to volume ratio of 375 sq. in./L.
[2] Certified for a maximum surface area to volume ratio of 250 sq. in./L.

[1] Certification does not include any end connection, gasket, or o-ring options. Product
    has not been evaluated for point-of-end (POE) or point-or-use (POU) end uses.
[2] Certified for a minimum daily flow of 1,870 L per 3" of cartridge length.
[3] X - Retention Rating: 0.5 µm - 200 µm
[4] XX - Cartridge Length: 3" - 100"
[5] Inner Diameter: 28 mm
[6] Outer Diameter: 60 mm - 115 mm
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] Certified for the following colors: black, tan, white.  Certified for heat seamed
    systems only.

[1] Appurtenance end use not to exceed 250 sq. in./L.

* All listed products from this facility are NSF Certified, whether or not they bear the
  NSF Mark.
[1] The second digit of this trade designation can be 3, 4, 5, 6, 7, 8, or 9.
[2] Certified for a maximum surface area to volume ratio of 200 sq. in./L.
[3] X in trade designation can be 2, 3, 4, 5, 6, 7, 8, or 9, and may be followed by S to
    indicate that the material is in spherical form.
[4] Y in trade designation can be 1, 2, 3, or 4.
[5] Certified for a maximum surface area to volume ratio of 15 sq. in./ L.

[1] Design-Flow trade name may be followed by a suffix of #341-351 or #353.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] Configurations include:
    
    Female Elbow 90° A1
    PP-R-2101 (20 mm x 1/2")
    PP-R-2102 (20 mm x 3/4")
    PP-R-2103 (25 mm x 1/2")
    PP-R-2104 (25 mm x 3/4")
    PP-R-2106 (32 mm x 1/2")
    PP-R-2107 (32 mm x 3/4")
    
    Female Elbow 90° A2
    PP-R-2208 (32 mm x 1")
    
    emale Elbow 90° with Seat
    PP-R-2601 (20 mm x 1/2")
    PP-R-2602 (20 mm x 3/4")
    PP-R-2603 (25 mm x 1/2")
    PP-R-2604 (25 mm x 3/4")
    
    Female Straight A1
    PP-R-1701 (20 mm x 1/2")
    PP-R-1702 (20 mm x 3/4")
    PP-R-1703 (25 mm x 1/2")
    PP-R-1704 (25 mm x 3/4")
    PP-R-1706 (32 mm x 1/2")
    PP-R-1707 (32 mm x 3/4")
    
    Female Straight A2
    PP-R-1808 (32 mm x 1")
    PP-R-1809 (40 mm x 1")
    PP-R-1810 (40 mm x 1-1/4")
    PP-R-1812 (50 mm x 1-1/4")
    PP-R-1813 (50 mm x 1-1/2")
    PP-R-1814 (63 mm x 2")
    
    Female Tee A1
    PP-R-2701 (20 mm x 1/2")
    PP-R-2702 (20 mm x 3/4")
    PP-R-2703 (25 mm x 1/2")
    PP-R-2704 (25 mm x 3/4")
    PP-R-2706 (32 mm x 1/2")
    PP-R-2707 (32 mm x 3/4")
    
    Female Tee A2
    PP-R-2808 (32 mm x 1")
    
    Female Union
    PP-R-3201 (20 mm x 1/2")
    PP-R-3204 (25 mm x 3/4")
    PP-R-3205 (25 mm x 1")
    PP-R-3207 (32 mm x 3/4")
    PP-R-3208 (32 mm x 1")
    PP-R-3210 (40 mm x 1-1/4")
    PP-R-3213 (50 mm x 1-1/2")
    PP-R-3214 (63 mm x 2")
    
    Male Elbow 90° A1
    PP-R-2301 (20 mm x 1/2")
    PP-R-2302 (20 mm x 3/4")
    PP-R-2303 (25 mm x 1/2")
    PP-R-2304 (25 mm x 3/4")
    PP-R-2306 (32 mm x 1/2")
    PP-R-2307 (32 mm x 3/4")
    
    Male Elbow 90° A2
    PP-R-2408 (32 mm x 1")
    
    Male Straight A1
    PP-R-1901 (20 mm x 1/2")
    PP-R-1902 (20 mm x 3/4")
    PP-R-1903 (25 mm x 1/2")
    PP-R-1904 (25 mm x 3/4")
    PP-R-1906 (32 mm x 1/2")
    PP-R-1907 (32 mm x 3/4")
    PP-R-1909 (40 mm x 1")
    
    Male Straight A2
    PP-R-2008 (32 mm x 1")
    PP-R-2010 (40 mm x 1-1/4")
    PP-R-2012 (50 mm x 1-1/4")
    PP-R-2013 (50 mm x 1-1/2")
    PP-R-2014 (63 mm x 2")
    
    Male Tee A1
    PP-R-2901 (20 mm x 1/2")
    PP-R-2902 (20 mm x 3/4")
    PP-R-2903 (25 mm x 1/2")
    PP-R-2904 (25 mm x 3/4")
    PP-R-2906 (32 mm x 1/2")
    PP-R-2907 (32 mm x 3/4")
    
    Male Tee A2
    PP-R-3008 (32 mm x 1")
    
    Male Union
    PP-R-3101 (20 mm x 1/2")
    PP-R-3104 (25 mm x 3/4")
    PP-R-3105 (25 mm x 1")
    PP-R-3107 (32 mm x 3/4")
    PP-R-3108 (32 mm x 1")
    PP-R-3110 (40 mm x 1-1/4")
    PP-R-3113 (50 mm x 1-1/2")
    PP-R-3114 (63 mm x 2")
[2] Configurations include:
    
    45° Elbow
    PP-R-1301 (16mm)
    PP-R-1302 (20mm)
    PP-R-1303 (25mm)PP-R-1304 (32mm)
    PP-R-1305 (40mm)
    PP-R-1306 (50mm)
    PP-R-1307 (63mm)
    PP-R-1308 (75mm)
    PP-R-1309 (90mm)
    PP-R-1310 (110mm)
    PP-R-1313 (160mm)
    
    90° Elbow
    PP-R-1001 (16mm)
    PP-R-1002 (20mm)
    PP-R-1003 (25mm)
    PP-R-1004 (32mm)
    PP-R-1005 (40mm)
    PP-R-1006 (50mm)
    PP-R-1007 (63mm)
    PP-R-1008 (75mm)
    PP-R-1009 (90mm)
    PP-R-1010 (110mm)
    PP-R-1013 (160mm)
    
    Cap
    PP-R-1501 (16mm)
    PP-R-1502 (20mm)
    PP-R-1503 (25mm)
    PP-R-1504 (32mm)
    PP-R-1505 (40mm)
    PP-R-1506 (50mm)
    PP-R-1507 (63mm)
    PP-R-1508 (75mm)
    PP-R-1509 (90mm)
    PP-R-1510 (110mm)
    PP-R-1513 (160mm)
    
    Coupler
    PP-R-0901 (16mm)
    PP-R-0902 (20mm)
    PP-R-0903 (25mm)
    PP-R-0904 (32mm)
    PP-R-0905 (40mm)
    PP-R-0906 (50mm)
    PP-R-0907 (63mm)
    PP-R-0908 (75mm)
    PP-R-0909 (90mm)
    PP-R-0910 (110mm)
    PP-R-0913 (160mm)
    
    Reducer
    PP-R-1401 (20×16mm)
    PP-R-1402 (25×16mm)
    PP-R-1403 (25×20mm)
    PP-R-1404 (32×16mm)
    PP-R-1405 (32×20mm)
    PP-R-1406 (32×25mm)
    PP-R-1407 (40×20mm)
    PP-R-1408 (40×25mm)
    PP-R-1409 (40×32mm)
    PP-R-1410 (50×20mm)
    PP-R-1411 (50×25mm)
    PP-R-1412 (50×32mm)
    PP-R-1413 (50×40mm)
    PP-R-1414 (63×25mm)
    PP-R-1415 (63×32mm)
    PP-R-1416 (63×40mm)
    PP-R-1417 (63×50mm)
    PP-R-1418 (75×32mm)
    PP-R-1419 (75×40mm)
    PP-R-1420 (75×50mm)
    PP-R-1421 (75×63mm)
    PP-R-1422 (90×40mm)
    PP-R-1424 (90×63mm)
    PP-R-1425 (90×75mm)
    PP-R-1426 (110×50mm)
    PP-R-1427 (110×63mm)
    PP-R-1428 (110×75mm)
    PP-R-1429 (110×90mm)
    PP-R-1430 (160×110mm)
    PP-R-1431 (160×90mm)
    
    Reducing Tee
    PP-R-1201 (20×16mm)
    PP-R-1202 (20×25mm)
    PP-R-1203 (25×16mm)
    PP-R-1204 (25×25×20mm)
    PP-R-1205 (25×20×20mm)
    PP-R-1206 (32×16mm)
    PP-R-1207 (32×20mm)
    PP-R-1208 (32×25mm)
    PP-R-1209 (40×20mm)
    PP-R-1210 (40×25mm)
    PP-R-1211 (40×32mm)
    PP-R-1212 (50×20mm)
    PP-R-1213 (50×25mm)
    PP-R-1231 (110×90mm)
    PP-R-1232 (160×110mm)
    PP-R-1233 (160×90mm)
    PP-R-1214 (50×32mm)
    PP-R-1215 (50×40mm)
    PP-R-1216 (63×25mm)
    PP-R-1217 (63×26mm)
    PP-R-1218 (63×40mm)
    PP-R-1219 (63×50mm)
    PP-R-1220 (75×32mm)
    PP-R-1221 (75×40mm)
    PP-R-1222 (75×50mm)
    PP-R-1223 (75×63mm)
    PP-R-1224 (90×40mm)
    PP-R-1225 (90×50mm)
    PP-R-1226 (90×63mm)
    PP-R-1227 (90×75mm)
    PP-R-1228 (110×50mm)
    PP-R-1229 (110×63mm)
    PP-R-1230 (110×75mm)
    
    Tee
    PP-R-1101 (16mm)
    PP-R-1102 (20mm)
    PP-R-1103 (25mm)
    PP-R-1104 (32mm)
    PP-R-1105 (40mm)
    PP-R-1106 (50mm)
    PP-R-1107 (63mm)
    PP-R-1108 (75mm)
    PP-R-1109 (90mm)
    PP-R-1110 (110mm)
    PP-R-1113 (160mm)
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

# This product may be marked with an alternate trade name: Liansu.
[3] Certification includes the following:
    LE011-030   3 in
    LE011-040   4 in
    LE011-060   6 in
    LE011-080  8 in
    LE011-100  10 in
    LE011-120  12 in
    LE011-180  18 in
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] Membrane is Certified for a thickness of 36, 45, or 60 mil gauge.
[2] Membrane is Certified for the following colors: Black, tan, gray, and white.

[1] Certified for point-of-entry (POE) and municipal end uses.
[2] Certification does not include inner core, adapters, o-rings, gaskets, or end caps.
[3] XX - 1.5" – 8" Diameter					
    YY - 2" – 60" Length					
    ZZ - 0.5m – 200m Micron Rating					
    *Special lengths and diameters within the certified range are included in the
    certification such as 2 1/4" diameter and 30 1/4" length.
[4] WW - Internal Code AA-ZZ					
    XX - 1.5" – 8" Diameter					
    YY - 2" – 60" Length					
    ZZ - 0.5m – 200m Micron Rating					
    *Special lengths and diameters within the certified range are included in the
    certification such as 2 1/4" diameter and 30 1/4" length.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] Certified for a maximum surface area to volume ratio of 500 square inches per liter.
[2] Use of this material in NSF Certified pipe and tubing requires NSF's authorization.
[3] Certified for maximum surface area to volume ratio of 350 sq. in./L.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] The only Certified material for the above Listed products is Polypropylene (PP).

[1] (1) 2 digits represent the amount of fiberglass added to the material with a range of 5%
    - 65%.
[2] Certified for a maximum surface area to volume ratio of 270 square inches/L.
[3] xy, xxx, x-represented by digits to indicate color properties.
[4] R - replaced by one digit to denote filler content.
    XX, XXX, and XXXX - represented by digits to indicate color properties.
[6] xxxx & xx - represented by digits or letters to indicate color properties.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] Coupling
    20 mm (KPT C-0001)
    25 mm (KPT C-0002)
    32 mm (KPT C-0003)
    40 mm (KPT C-0004)
    50 mm (KPT C-0005)
    63 mm (KPT C-0006)
    75 mm (KPT C-0007)
    90 mm (KPT C-0008)
    110 mm (KPT C-0009)
    160 mm (KPT C-0010)
    
    Elbow 90°
    20 mm (KPT E90-0021)
    25 mm (KPT E90-0022)
    32 mm (KPT E90-0023)
    40 mm (KPT E90-0024)
    50 mm (KPT E90-0025)
    63 mm (KPT E90-0026)
    75 mm (KPT E90-0027)
    90 mm (KPT E90-0028)
    110 mm (KPT E90-0029)
    160 mm (KPT E90-0030)
    200 mm (KPT E90-0031)
    250 mm (KPT E90-0032)
    315 mm (KPT E90-0033)
    355 mm (KPT E90-0034)
    400 mm (KPT E90-0035)
    
    Elbow 45°
    20 mm (KPT E45-0041)
    25 mm (KPT E45-0042)
    32 mm (KPT E45-0043)
    40 mm (KPT E45-0044)
    50 mm (KPT E45-0045)
    63 mm (KPT E45-0046)
    75 mm (KPT E45-0047)
    90 mm (KPT E45-0048)
    110 mm (KPT E45-0049)
    160 mm (KPT E45-0050)
    200 mm (KPT E45-0051)
    250 mm (KPT E45-0052)
    315 mm (KPT E45-0053)
    355 mm (KPT E45-0054)
    400 mm (KPT E45-0055)
    
    Equal Tee
    20 mm (KPT ET-0061)
    25 mm (KPT ET-0062)
    32 mm (KPT ET-0063)
    40 mm (KPT ET-0064)
    50 mm (KPT ET-0065)
    63 mm (KPT ET-0066)
    75 mm (KPT ET-0067)
    90 mm (KPT ET-0068)
    110 mm (KPT ET-0069)
    160 mm (KPT ET-0070)
    200 mm (KPT ET-0071)
    250 mm (KPT ET-0072)
    315 mm (KPT ET-0073)
    355 mm (KPT ET-0074)
    400 mm (KPT ET-0075)
    
    Reducing Elbow
    25 mm x 20 mm (KPT RE-0121)
    32 mm x 20 mm (KPT RE-0122)
    32 mm x 25 mm (KPT RE-0123)
    40 mm x 20 mm (KPT RE-0124)
    40 mm x 25 mm (KPT RE-0125)
    40 mm x 32 mm (KPT RE-0126)
[2] Reducer
    25 mm x 20 mm (KPT R-0081)
    32 mm x 20 mm (KPT R-0082)
    32 mm x 25 mm (KPT R-0083)
    40 mm x 20 mm (KPT R-0084)
    40 mm x 25 mm (KPT R-0085)
    40 mm x 32 mm (KPT R-0086)
    50 mm x 20 mm (KPT R-0087)
    50 mm x 25 mm (KPT R-0088)
    50 mm x 32 mm (KPT R-0089)
    50 mm x 40 mm (KPT R-0090)
    63 mm x 20 mm (KPT R-0091)
    63 mm x 25 mm (KPT R-0092)
    63 mm x 32 mm (KPT R-0093)
    63 mm x 40 mm (KPT R-0094)
    63 mm x 50 mm (KPT R-0095)
    75 mm x 40 mm (KPT R-0097)
    75 mm x 50 mm (KPT R-0098)
    75 mm x 63 mm (KPT R-0099)
    90 mm x 50 mm (KPT R-0100)
    90 mm x 63 mm (KPT R-0101)
    90 mm x 75 mm (KPT R-0102)
    110 mm x 50 mm (KPT R-0103)
    110 mm x 63 mm (KPT R-0104)
    110 mm x 75 mm (KPT R-0105)
    110 mm x 90 mm (KPT R-0106)
    160 mm x 110 mm (KPT R-0107)
    160 mm x 90 mm (KPT R-0108)
    160 mm x 75 mm (KPT R-0109)
    160 mm x 63 mm (KPT R-0110)
    160 mm x 50 mm (KPT R-0111)
    160 mm x 40 mm (KPT R-0112)
    160 mm x 32 mm (KPT R-0113)
    160 mm x 25 mm (KPT R-0114)
    160 mm x 20 mm (KPT R-0115)
    110 mm x 40 mm (KPT R-0116)
    110 mm x 32 mm (KPT R-0117)
    110 mm x 25 mm (KPT R-0118)
    110 mm x 20 mm (KPT R-0119)
    90 mm x 40 mm (KPT R-0120)
    90 mm x 32 mm (KPT R-0121)
    90 mm x 25 mm (KPT R-0122)
    90 mm x 20 mm (KPT R-0123)
    75 mm x 32 mm (KPT R-0124)
    75 mm x 25 mm (KPT R-0125)
    75 mm x 20 mm (KPT R-0126)
    200 mm x 160 mm (KPT R-0127)
    200 mm x 110 mm (KPT R-0128)
    200 mm x 90 mm (KPT R-0129)
    200 mm x 75 mm (KPT R-0130)
    200 mm x 63 mm (KPT R-0131)
    200 mm x 50 mm (KPT R-0132)
    200 mm x 40 mm (KPT R-0133)
    200 mm x 32 mm (KPT R-0134)
    200 mm x 25 mm (KPT R-0135)
    200 mm x 20 mm (KPT R-0136)
    250 mm x 200 mm (KPT R-0137)
    250 mm x 160 mm (KPT R-0138)
    250 mm x 110 mm (KPT R-0139)
    250 mm x 90 mm (KPT R-0140)
    250 mm x 75 mm (KPT R-0141)
    250 mm x 63 mm (KPT R-0142)
    250 mm x 50 mm (KPT R-0143)
    250 mm x 40 mm (KPT R-0144)
    250 mm x 32 mm (KPT R-0145)
    250 mm x 25 mm (KPT R-0146)
    250 mm x 20 mm (KPT R-0147)
    315 mm x 250 mm (KPT R-0148)
    315 mm x 200 mm (KPT R-0149)
    315 mm x 160 mm (KPT R-0150)
    315 mm x 110 mm (KPT R-0151)
    315 mm x 90 mm (KPT R-0152)
    315 mm x 75 mm (KPT R-0153)
    315 mm x 63 mm (KPT R-0154)
    315 mm x 50 mm (KPT R-0155)
    315 mm x 40 mm (KPT R-0156)
    315 mm x 32 mm (KPT R-0157)
    315 mm x 25 mm (KPT R-0158)
    315 mm x 25 mm (KPT R-0159)
    315 mm x 20 mm (KPT R-0160)
    355 mm x 315 mm (KPT R-0161)
    355 mm x 250 mm (KPT R-0162)
    355 mm x 200 mm (KPT R-0163)
    355 mm x 160 mm (KPT R-0164)
    355 mm x 110 mm (KPT R-0165)
    355 mm x 90 mm (KPT R-0166)
    355 mm x 75 mm (KPT R-0167)
    355 mm x 63 mm (KPT R-0168)
    355 mm x 50 mm (KPT R-0169)
    355 mm x 40 mm (KPT R-0170)
    355 mm x 32 mm (KPT R-0171)
    355 mm x 25 mm (KPT R-0172)
    355 mm x 20 mm (KPT R-0173)
    400 mm x 355 mm (KPT R-0174)
    400 mm x 315 mm (KPT R-0175)
    400 mm x 250 mm (KPT R-0176)
    400 mm x 200 mm (KPT R-0177)
    400 mm x 160 mm (KPT R-0178)
    400 mm x 110 mm (KPT R-0179)
    400 mm x 90 mm (KPT R-0180)
    400 mm x 75 mm (KPT R-0181)
    400 mm x 63 mm (KPT R-0182)
    400 mm x 50 mm (KPT R-0183)
    400 mm x 40 mm (KPT R-0184)
    400 mm x 32 mm (KPT R-0185)
    400 mm x 25 mm (KPT R-0186)
    400 mm x 20 mm (KPT R-0187)
[3] Reducing Tee
    25 mm x 20 mm x 25 mm (KPT RT-0141)
    32 mm x 20 mm x 32 mm (KPT RT-0142)
    32 mm x 25 mm x 32 mm (KPT RT-0143)
    40 mm x 20 mm x 40 mm (KPT RT-0144)
    40 mm x 25 mm x 40 mm (KPT RT-0145)
    40 mm x 32 mm x 40 mm (KPT RT-0146)
    50 mm x 20 mm x 50 mm (KPT RT-0147)
    50 mm x 25 mm x 50 mm (KPT RT-0148)
    50 mm x 32 mm x 50 mm (KPT RT-0149)
    50 mm x 40 mm x 50 mm (KPT RT-0150)
    63 mm x 20 mm x 63 mm (KPT RT-0151)
    63 mm x 25 mm x 63 mm (KPT RT-0152)
    63 mm x 32 mm x 63 mm (KPT RT-0153)
    63 mm x 40 mm x 63 mm (KPT RT-0154)
    63 mm x 50 mm x 63 mm (KPT RT-0155)
    75 mm x 40 mm x 75 mm (KPT RT-0156)
    75 mm x 50 mm x 75 mm (KPT RT-0157)
    75 mm x 63 mm x 75 mm (KPT RT-0158)
    90 mm x 50 mm x 90 mm (KPT RT-0159)
    90 mm x 63 mm x 90 mm (KPT RT-0160)
    90 mm x 75 mm x 90 mm (KPT RT-0161)
    110 mm x 50 mm x 110 mm (KPT RT-0162)
    110 mm x 63 mm x 110 mm (KPT RT-0163)
    110 mm x 75 mm x 110 mm (KPT RT-0164)
    110 mm x 90 mm x 110 mm (KPT RT-0165)
    160 mm x 110 mm x 160 mm (KPT RT-0166)
    160 mm x 90 mm x 160 mm (KPT RT-0167)
    160 mm x 75 mm x 160 mm (KPT RT-0168)
    160 mm x 63 mm x 160 mm (KPT RT-0169)
    160 mm x 50 mm x 160 mm (KPT RT-0170)
    160 mm x 40 mm x 160 mm (KPT RT-0171)
    160 mm x 32 mm x 160 mm (KPT RT-0172)
    160 mm x 25 mm x 160 mm (KPT RT-0173)
    160 mm x 20 mm x 160 mm (KPT RT-0174)
    110 mm x 40 mm x 110 mm (KPT RT-0175)
    110 mm x 32 mm x 110 mm (KPT RT-0176)
    110 mm x 25 mm x 110 mm (KPT RT-0177)
    110 mm x 20 mm x 110 mm (KPT RT- 0178)
    90 mm x 40 mm x 90 mm (KPT RT-0179)
    90 mm x 32 mm x 90 mm (KPT RT- 0180)
    90 mm x 25 mm x 90 mm (KPT RT-0181)
    90 mm x 20 mm x 90 mm (KPT RT-0182)
    75 mm x 32 mm x 75 mm (KPT RT- 0183)
    75 mm x 25 mm x 75 mm (KPT RT-0184)
    75 mm x 20 mm x 75 mm (KPT RT-0185)
    200 mm x 160 mm x 200 mm (KPT RT-0186)
    200 mm x 110 mm x 200 mm (KPT RT-0187)
    200 mm x 90 mm x 200 mm (KPT RT-0188)
    200 mm x 75 mm x 200 mm (KPT RT-0189)
    200 mm x 63 mm x 200 mm (KPT RT-0190)
    200 mm x 50 mm x 200 mm (KPT RT-0191)
    200 mm x 40 mm x 200 mm (KPT RT-0192)
    200 mm x 32 mm x 200 mm (KPT RT-0193)
    200 mm x 25 mm x 200 mm (KPT RT-0194)
    200 mm x 20 mm x 200 mm (KPT RT-0195)
    250 mm x 200 mm x 250 mm (KPT RT-0196)
    250 mm x 160 mm x 250 mm (KPT RT-0197)
    250 mm x 110 mm x 250 mm (KPT RT-0198)
    250 mm x 90 mm x 250 mm (KPT RT-0199
    250 mm x 75 mm x 250 mm (KPT RT-0200)
    250 mm x 63 mm x 250 mm (KPT RT-0201)
    250 mm x 50 mm x 250 mm (KPT RT-0202)
    250 mm x 40 mm x 250 mm (KPT RT-0203)
    250 mm x 32 mm x 250 mm (KPT RT-0204)
    250 mm x 25 mm x 250 mm (KPT RT-0205)
    250 mm x 20 mm x 250 mm (KPT RT-0206)
    315 mm x 250 mm x 315 mm (KPT RT-0207)
    315 mm x 200 mm x 315 mm (KPT RT-0208)
    315 mm x 160 mm x 315 mm (KPT RT-0209)
    315 mm x 110 mm x 315 mm (KPT RT-0210)
    315 mm x 90 mm x 315 mm (KPT RT-0211)
    315 mm x 75 mm x 315 mm (KPT RT-0212)
    315 mm x 63 mm x 315 mm (KPT RT-0213)
    315 mm x 50 mm x 315 mm (KPT RT-0214)
    315 mm x 40 mm x 315 mm (KPT RT-0215)
    315 mm x 32 mm x 315 mm (KPT RT-0216)
    315 mm x 25 mm x 315 mm (KPT RT-0217)
    315 mm x 25 mm x 315 mm (KPT RT-0218)
    315 mm x 20 mm x 315 mm (KPT RT-0219)
    355 mm x 315 mm x 355 mm (KPT RT-0220)
    355 mm x 250 mm x 355 mm (KPT RT-0221)
    355 mm x 200 mm x 355 mm (KPT RT-0222)
    355 mm x 160 mm x 355 mm (KPT RT-0223)
    355 mm x 110 mm x 355 mm (KPT RT-0224)
    355 mm x 90 mm x 355 mm (KPT RT-0225)
    355 mm x 75 mm x 355 mm (KPT RT-0226)
    355 mm x 63 mm x 355 mm (KPT RT-0227)
    355 mm x 50 mm x 355 mm (KPT RT-0228)
    355 mm x 40 mm x 355 mm (KPT RT-0229)
    355 mm x 32 mm x 355 mm (KPT RT-0230)
    355 mm x 25 mm x 355 mm (KPT RT-0231)
    355 mm x 20 mm x 355 mm (KPT RT-0232)
    400 mm x 355 mm x 400 mm (KPT RT-0233)
    400 mm x 315 mm x 400 mm (KPT RT-0234)
    400 mm x 250 mm x 400 mm (KPT RT-0235)
    400 mm x 200 mm x 400 mm (KPT RT-0236)
    400 mm x 160 mm x 400 mm (KPT RT-0237)
    400 mm x 110 mm x 400 mm (KPT RT-0238).
    400 mm x 90 mm x 400 mm (KPT RT-0239)
    400 mm x 75 mm x 400 mm (KPT RT-0240)
    400 mm x 63 mm x 400 mm (KPT RT-0241)
    400 mm x 50 mm x 400 mm (KPT RT-0242)
    400 mm x 40 mm x 400 mm (KPT RT-0243)
    400 mm x 32 mm x 400 mm (KPT RT-0244)
    400 mm x 25 mm x 400 mm (KPT RT-0245)
    400 mm x 20 mm x 400 mm (KPT 
[4] End Cap
    20 mm (KPT EC-0181)
    25 mm (KPT EC-0182)
    32 mm (KPT EC-0183)
    40 mm (KPT EC-0184)
    50 mm (KPT EC-0185)
    63 mm (KPT EC-0186)
    75 mm (KPT EC-0187)
    90 mm (KPT EC-0188)
    110 mm (KPT EC-0189)
    160 mm (KPT EC-0190)
    
    Flange Core (Stub End)
    32 mm (KPT FC-0201)
    40 mm (KPT FC-0202)
    50 mm (KPT FC-0203)
    63 mm (KPT FC-0204)
    75 mm (KPT FC-0205)
    90 mm (KPT FC-0206)
    110 mm (KPT FC-0207)
    160 mm (KPT FC-0208)
    200 mm (KPT FC-0200)
    250 mm (KPT FC-0210)
    315 mm (KPT FC-0211)
    355 mm (KPT FC-0212)
    400 mm (KPT FC-0213)
    
    Slip-On (PPR Flanges)
    32 mm (KPT F-0221)
    40 mm (KPT F-0222)
    50 mm (KPT F-0223)
    63 mm (KPT F-0224)
    75 mm (KPT F-0225)
    90 mm (KPT F-0226)
    110 mm (KPT F-0227)
    160 mm (KPT F-0228)
    
    4Way/Cross Tee
    20 mm (KPT CT-0261)
    25 mm (KPT CT-0262)
    32 mm (KPT CT-0263)
    40 mm (KPT CT-0264)
    50 mm (KPT CT-0265)
    63 mm (KPT CT-0266)
    
    Pipe Clamp
    20 mm (KPT PC-0281)
    25 mm (KPT PC-0282)
    32 mm (KPT PC-0283)
    40 mm (KPT PC-0284)
    50 mm (KPT PC-0285)
    63 mm (KPT PC-0286)
    
    Long Plug
    ½’’ (KPT LP-0301)
    ¾’’ (KPT LP-0302)
    1’’ (KPT LP-0303)
    

[1] The LAGOON® Melt Blown Cartridge - PP is certified for a minimum flow rate of 1,920
    liters per day per inch of filter for use in industrial water treatment facilities only.
[2] Products are certified with the following ranges of sizes and micron ratings:
    OCEANIC® Melt Blown Cartridge - PP:
    Length: 127 mm to 1778 mm
    Width: 40 mm to 114 mm
    Micron Rating: 0.5 µ to 100 µ
    LAGOON® Melt Blown Cartridge - PP:
    Length: 127 mm to 1778 mm
    Width: 50 mm to 63 mm
    Micron Rating: 1 µ to 100 µ
    OCEANIC® Melt Blown Cartridge - PP and LAGOON® Melt Blown Cartridge - PP require a
    pre-service flush for 1 minute at a minimum of 1.5 kg/cm2 (21 psi).
[3] The OCEANIC® Melt Blown Cartridge - PP is certified for a minimum flow rate of 2,400
    liters per day per inch of filter for use in industrial water treatment facilities only.
[4] PEORA® Melt Blown Cartridge - PP:
    Length: 127 mm to 1778 mm
    Width: 40 mm to 114 mm
    Micron Rating: 0.5 µ to 100 µ

[1] The LAGOON® Melt Blown Cartridge - PP is certified for a minimum flow rate of 1,920
    liters per day per inch of filter for use in industrial water treatment facilities only.
[2] OCEANIC® Melt Blown Cartridge - PP and LAGOON® Melt Blown Cartridge - PP require a
    pre-service flush for 1 minute at a minimum of 1.5 kg/cm2 (21 psi).
[3] Products are certified with the following ranges of sizes and micron ratings:
    LAGOON® Melt Blown Cartridge - PP:
    Length: 127 mm to 1778 mm
    Width: 50 mm to 63 mm
    Micron Rating: 1 µ to 100 µ
[4] The OCEANIC® Melt Blown Cartridge - PP is certified for a minimum flow rate of 2,400
    liters per day per inch of filter for use in industrial water treatment facilities only.
[5] Products are certified with the following ranges of sizes and micron ratings:
    OCEANIC® Melt Blown Cartridge - PP:
    Length: 127 mm to 1778 mm
    Width: 40 mm to 114 mm
    Micron Rating: 0.5 µ to 100 µ
[6] PEORA® Melt Blown Cartridge - PP:
    Length: 127 mm to 1778 mm
    Width: 40 mm to 114 mm
    Micron Rating: 0.5 µ to 100 µ

[1] Certified for a maximum surface area to volume ratio of 250 square inches/L.

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] XX - Indicates the glass fiber content.
[2] Certified for a maximum surface area to volume ratio of 145 sq.in./L.
[3] n - Indicates the glass fiber content (0 - 50%)
[4] F - 0, 1, 2……10 means: Filler content 0%, 5%, 10%…50%
    T - A, B……Z, means: Buyer's code
[5] F - 1, 2, 3……10 means: Filler content 5%, 10%, 15%…50%.

[1] Certified for a maximum surface area to volume ratio of 100 sq. in/L.
[2] Certified for a maximum surface area to volume ratio of 60 sq. in./L.
[3] Certified for a maximum surface area to volume ratio of 170 sq. in/L.
[4] Certified for a maximum surface area to volume ratio of 320 sq. in/L.
[5] Certified for a maximum surface area to volume ratio of 250 sq. in/L.

[1] Jaeger Tri-Packs PP is Certified for the following sizes:
    1" - 3.5"

[1] Jaeger Tri-Packs PP is Certified for the following diameters: 1" - 3.5".

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[1] This product represents the following configurations:
    Equal Straight Union, PF15c-S, 1/8" - 2 1/2"
    Equal Elbow, PF15c-L, 1/8" - 2 1/2"
    Equal Straight Union PF15c(II)-S, 1/8" - 2-1/2"
    Equal Elbow, PF15c(II)-L, 1/8" - 2-1/2"
[2] For trade names, the use of "m" in trade name indicates use of C69300 alloy.
[3] xx, yy, zz - indicates the dimension range from 20 mm - 315 mm
    x/y - indicates the thread range from 1/2'' - 1-1/2''
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] This product represents the following configurations:
    Equal Straight Union, PF15c-S, 1/8" - 2 1/2"
    Equal Elbow, PF15c-L, 1/8" - 2 1/2"
    Equal Straight Union PF15c(II)-S, 1/8" - 2-1/2"
    Equal Elbow, PF15c(II)-L, 1/8" - 2-1/2"
[2] For trade names, the use of "m" in trade name indicates use of C69300 alloy.
[3] xx, yy, zz - indicates the dimension range from 20 mm - 315 mm
    x/y - indicates the thread range from 1/2" - 1-1/2"
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] Configurations include:
    -PP Bends 90°
    -PP Stub flanges for loose flange ISO/DIN, injected
    -PP Stub flanges for loose flange ISO/DIN, machined
    -PP Stub flanges for loose flange ANSI
    -PP Tees
    -PP Tees with reduced branch
    -PP Reducers concentric, injected
    -PP Reducers concentric, machined
    -PP End caps, machined
    -PP Elbows
    -PP Bends 90°, injected
    -PP Stub flanges for loose flange ISO/DIN
    -PP Tees, injected
    -PP Tees with reduced branch, injected
    -PP Branches 45°, injected
    -PP Reducers eccentric
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] XX indicates the amount of fiberglass/wollastonite used: 5 - 60%
    
    Trade names may include the following color codes:
    NC - Natural
    BK - Black
    WT - White
    GY - Gray
[2] XX - replaced by one digit to denote filler content 5%- 60%.

[1] 20 x 25 x 20 mm - 160 x 125 x 160 mm
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] Configurations include:
    Coupler
    PP-R-36330 (16mm)
    PP-R-36337 (20mm)
    PP-R-36344 (25mm)
    PP-R-36351 (32mm)
    PP-R-36368 (40mm)
    PP-R-36375 (50mm)
    PP-R-36382 (63mm)
    PP-R-36399 (75mm)
    PP-R-36405 (90mm)
    PP-R-36412 (110mm)
    PP-R-61414 (160mm)
    
    45° Elbow
    PP-R-36601 (16mm)
    PP-R-36603 (20mm)
    PP-R-36610 (25mm)
    PP-R-36627 (32mm)
    PP-R-36634 (40mm)
    PP-R-36641 (50mm)
    PP-R-36658 (63mm)
    PP-R-36665(75mm)
    PP-R-36672 (90mm)
    PP-R-36689 (110mm)
    PP-R-60318 (160mm)
    
    90° Elbow
    PP-R-36422 (16mm)
    PP-R-36429(20mm)
    PP-R-36436 (25mm)
    PP-R-36443 (32mm)
    PP-R-36450 (40mm)
    PP-R-36467 (50mm)
    PP-R-36474(63mm)
    PP-R-36481 (75mm)
    PP-R-36498 (90mm)
    PP-R-36504 (110mm)
    PP-R-60332 (160mm)
    
    Tee
    PP-R-36504 (16mm)
    PP-R-36511 (20mm)
    PP-R-36528(25mm)
    PP-R-36535 (32mm)
    PP-R-36542 (40mm)
    PP-R-36559 (50mm)
    PP-R-36566 (63mm)
    PP-R-36573 (75mm)
    PP-R-36580 (90mm)
    PP-R-36597 (110mm)
    PP-R-60295 (160mm)
    
    Reducing Tee
    PP-R-36705 (20×16mm)
    PP-R-36712 (20×25mm)
    PP-R-36719 (25×16mm)
    PP-R-36726 (25×25×20mm)
    PP-R-36733 (25×20×20mm)
    PP-R-36740 (32×16mm)
    PP-R-36733 (32×20mm)
    PP-R-36740 (32×25mm)
    PP-R-36757 (40×20mm)
    PP-R-36764 (40×25mm)
    PP-R-36771 (40×32mm)
    PP-R-36788 (50×20mm)
    PP-R-36795 (50×25mm)
    PP-R-36801 (50×32mm)
    PP-R-36818 (50×40mm)
    PP-R-36825 (63×25mm)
    PP-R-36832 (63×26mm)
    PP-R-36849 (63×40mm)
    PP-R-36856 (63×50mm)
    PP-R-36860 (75×32mm)
    PP-R-36863 (75×40mm)
    PP-R-36870 (75×50mm)
    PP-R-36887 (75×63mm)
    PP-R-36894 (90×40mm)
    PP-R-36900 (90×50mm)
    PP-R-36917 (90×63mm)
    PP-R-36924 (90×75mm)
    PP-R-36931 (110×50mm)
    PP-R-36948 (110×63mm)
    PP-R-36955 (110×75mm)
    PP-R-36962 (110×90mm)
    PP-R-36976 (160×110mm)
    PP-R-36969 (160×90mm)
    
    Cap
    PP-R-37167 (16mm)
    PP-R-37174 (20mm)
    PP-R-37181 (25mm)
    PP-R-37198 (32mm)
    PP-R-61254 (40mm)
    PP-R-61261 (50mm)
    PP-R-61278 (63mm)
    PP-R-61285 (75mm)
    PP-R-61292 (90mm)
    PP-R-61308 (110mm)
    PP-R-60288 (160mm)
    
    Reducer
    PP-R-36965 (20×16mm)
    PP-R-36972 (25×16mm)
    PP-R-36979 (25×20mm)
    PP-R-36983 (32×16mm)
    PP-R-36986 (32×20mm)
    PP-R-36993 (32×25mm)
    PP-R-37006 (40×20mm)
    PP-R-37013 (40×25mm)
    PP-R-37020 (40×32mm)
    PP-R-37037 (50×20mm)
    PP-R-37044 (50×25mm)
    PP-R-37051 (50×32mm)
    PP-R-37068 (50×40mm)
    PP-R-37075 (63×25mm)
    PP-R-37082 (63×32mm)
    PP-R-37089 (63×40mm)
    PP-R-37105 (63×50mm)
    PP-R-60387 (75×32mm)
    PP-R-60370 (75×40mm)
    PP-R-60363 (75×50mm)
    PP-R-37112 (75×63mm)
    PP-R-60356 (90×40mm)
    PP-R-37129 (90×63mm)
    PP-R-37136 (90×75mm)
    PP-R-62527 (110×50mm)
    PP-R-37143 (110×63mm)
    PP-R-37150 (110×75mm)
    PP-R-37167 (110×90mm)
    PP-R-60349 (160×110mm)
    PP-R-60356 (160×90mm)
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] 20 x 25 x 20 mm - 160 x 125 x 160 mm
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] Number shown in size is the outer diameter. 
    
    MM: Micron rating 
    95 - 0.5
    01 to 200 (Equals micron rating as indicated by number) 
    
    LL: Length
    10 - 70"
    
    XXX: End adapters and O-Rings/Gasket options
    
    The PX, GX, LD, SX, RX, RO.Save.Z, WellproZ (WP), Purtrex Plus (PXP.Z) and Adv
    Industrial Grade filter (AIG.Z) designations will generally follow the format
    XXYY-ZZ-AB. 
    XX - Series type
    YY - Micron rating
    ZZ - Length
    AB - End Adapters and O-Rings/Gasket options
    Additional Suffixes:
    YKP  - Single Santoprene gasket, Polypropylene spring
    YKLP - Single Santoprene gasket, Extended core, Polypropylene spring
    YYP - Two santoprene gaskets
    
    End adapter and O-rings are optional and a suffix may or may not appear.
    
    End 1
    A - Open end w/ gasket
    E - 222 Adapter w/ O-Ring
    F - 226 Adapter w/ O-Ring
    L - Extended core
    X - Open end (no adapter)
    Y - 1 inch (2.54 cm) Open end gasket
    
    End 2
    A - Open end w/gasket
    K - Self seal spring
    H - Fin
    S - Solid end
    T - 338 adapter w/O-ring
    X - Open end (no adapter)
    Y - 1 inch (2.54 cm) Open end Gasket
    
    O-Ring and Gasket Material
    B - Buna-N
    E - EPDM
    P - Santoprene
    S - Silicone
    V - Viton2
    
    Viton is a registered trademark of DuPont Dow Elastomers.
    
    Certified for a minimum flow of 720 gallons/day/10" of filter.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] Either side may be used as the water contact side.

[1] 852LU6 Taupe, 452LU5 Green, 752LU3 Black, and 752LU4 Gray color concentrates may be
    mixed with NPPH2GF3 UV Natural at a maximum of 2%.

[1] 852LU6 Taupe, 452LU5 Green, 752LU3 Black, and 752LU4 Gray color concentrates may be
    mixed with NPPH2GF3 UV Natural at a maximum of 2%.

[1] 852LU6 Taupe, 452LU5 Green, 752LU3 Black, and 752LU4 Gray color concentrates may be
    mixed with NPPH2GF3 UV Natural at a maximum of 2%.

[1] 852LU6 Taupe, 452LU5 Green, 752LU3 Black, and 752LU4 Gray color concentrates may be
    mixed with NPPH2GF3 UV Natural at a maximum of 2%.

[1] These products may be also be represented by the trade name Seatech.
[2] Products may have an additional "-5" added to the part number.  This addition indicates
    the presence of an optional collet cover.  Products may be marked with "LF" to indicate
    Lead Free.
    
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.