NSF Product and Service Listings
These NSF Official Listings are current as of Sunday, August 25, 2024 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.
Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/PwsComponents/Listings.asp?MaterialType=ZINC&
NSF/ANSI/CAN 61
Drinking Water System Components - Health Effects
Drinking Water System Components - Health Effects
NOTE: Unless otherwise indicated for Materials, Certification is only for the Water Contact Material shown in the Listing. Click here for a list of Abbreviations used in these Listings. Click here for the definitions of Water Contact Temperatures denoted in these Listings. Products certified to NSF/ANSI/CAN 61 comply with the health effects criteria in NSF/ANSI/CAN 600.
PPG Protective and Marine Coatings | |
11605 Vimy Ridge Road | |
Alexander, AR 72002 | |
United States | |
501-235-9148 |
Facility : Alexander, AR
Protective (Barrier) Materials
Water | Water | |||
Water Contact | Contact | Contact | ||
Trade Designation | Size Restriction | Temp | Material | |
Primers[11] [12] |
||||
Sigmaweld 199 US | >= 900 gal. | CLD 23 | ZINC | |
[11] This primer may be used with any Certified PPG topcoat provided both primer and topcoat meet their individual Certified end uses. [12] Colors: Tan Number of Coats: 1 Maximum Field Use Dry Film Thickness (in mils): 1 Maximum Thinner: None Recoat Cure Time and Temperature: Not Applicable Final Cure Time and Temperature: Primer (cure before application of topcoat) - 7 days at ambient temperature (20°C) Special Comments: Mix ratio of binder:paste is 2:1 by volume. Apply to steel substrate. |
Sherwin-Williams | |
1101 South Third Street | |
Minneapolis, MN 55415 | |
United States | |
817-640-0848 |
Facility : Arlington, TX
Protective (Barrier) Materials
Water | Water | |||
Water Contact | Contact | Contact | ||
Trade Designation | Size Restriction | Temp | Material | |
Coatings - Fittings |
||||
EGS6-0M001 WATTS AM ZR Primer[1] | >= 2" | C. HOT | ZINC | |
[1] Color: Gray Number of coats: 1 Maximum field use dry film thickness (in mils): 10 mils Special comments: Required cure time is 20 min @ 300F or 10 min @ 400F [2] The suffixes indicate the following container type: C - Box D - Drum I - Overpack/international box J - Sample jar S - Super sack T - Tote The number following the letter indicates fill size in number of pounds per container. [3] Colors: Blue, gray Number of Coats: 1 Maximum Field Use Dry Film Thickness (in mils): 20 Recoat Cure Time and Temperature: 10 minutes at 350°F [4] Colors: Black oxide, blue, clear, green, off white, red oxide, tank tan, white Number of Coats: 1 Sequence of Coats: N/A Maximum Field Use Dry Film Thickness (in mils): 20 Maximum Thinner: N/A Recoat Cure Time and Temperature: 10 minutes at 350°F |
||||
Coatings - Pipe |
||||
EGS6-0M001 WATTS AM ZR Primer[1] | >= 12" | D. HOT | ZINC | |
[1] Color: Gray Number of coats: 1 Maximum field use dry film thickness (in mils): 10 mils Special comments: Required cure time is 20 min @ 300F or 10 min @ 400F [2] The suffixes indicate the following container type: C - Box D - Drum I - Overpack/international box J - Sample jar S - Super sack T - Tote The number following the letter indicates fill size in number of pounds per container. [3] Colors: Blue, gray Number of Coats: 1 Maximum Field Use Dry Film Thickness (in mils): 20 Recoat Cure Time and Temperature: 10 minutes at 350°F [4] Colors: Black oxide, blue, clear, green, off white, red oxide, tank tan, white Number of Coats: 1 Sequence of Coats: N/A Maximum Field Use Dry Film Thickness (in mils): 20 Maximum Thinner: N/A Recoat Cure Time and Temperature: 10 minutes at 350°F |
||||
Coatings - Tank |
||||
EGS6-0M001 WATTS AM ZR Primer[1] | >= 1000 gal. | C. HOT | ZINC | |
[1] Color: Gray Number of coats: 1 Maximum field use dry film thickness (in mils): 10 mils Special comments: Required cure time is 20 min @ 300F or 10 min @ 400F [2] The suffixes indicate the following container type: C - Box D - Drum I - Overpack/international box J - Sample jar S - Super sack T - Tote The number following the letter indicates fill size in number of pounds per container. [3] Colors: Blue, gray Number of Coats: 1 Maximum Field Use Dry Film Thickness (in mils): 20 Recoat Cure Time and Temperature: 10 minutes at 350°F [4] Colors: Black oxide, blue, clear, green, off white, red oxide, tank tan, white Number of Coats: 1 Sequence of Coats: N/A Maximum Field Use Dry Film Thickness (in mils): 20 Maximum Thinner: N/A Recoat Cure Time and Temperature: 10 minutes at 350°F |
||||
Coatings - Valve |
||||
EGS6-0M001 WATTS AM ZR Primer[1] | >= 2" | C. HOT | ZINC | |
[1] Color: Gray Number of coats: 1 Maximum field use dry film thickness (in mils): 10 mils Special comments: Required cure time is 20 min @ 300F or 10 min @ 400F [2] The suffixes indicate the following container type: C - Box D - Drum I - Overpack/international box J - Sample jar S - Super sack T - Tote The number following the letter indicates fill size in number of pounds per container. [3] Colors: Blue, gray Number of Coats: 1 Maximum Field Use Dry Film Thickness (in mils): 20 Recoat Cure Time and Temperature: 10 minutes at 350°F [4] Colors: Black oxide, blue, clear, green, off white, red oxide, tank tan, white Number of Coats: 1 Sequence of Coats: N/A Maximum Field Use Dry Film Thickness (in mils): 20 Maximum Thinner: N/A Recoat Cure Time and Temperature: 10 minutes at 350°F [5] Colors: Blue or Gray Number of coats: 4 Maximum field use dry film thickness(in mils): 44 (11 per coat) Recoat cure time and temperature: 10 minutes at 400° F Special comments: Cure time can be substituted with 7 minutes at 425° F or 15 minutes at 375° F. |
Sherwin-Williams Company | |
101 Prospect Avenue | |
Cleveland, OH 44115 | |
United States | |
773-821-3420 |
Facility : Andover, KS
Protective (Barrier) Materials
Water | Water | |||
Water Contact | Contact | Contact | ||
Trade Designation | Size Restriction | Temp | Material | |
Coatings - Tank |
||||
COROTHANE® I GALVAPAC 2K 100 Two Pack Zinc Primer[8] | [9] | CLD 23 | ZINC | |
Corothane I Galvapac Zinc Primer[6] | [7] | CLD 23 | ZINC | |
Zinc Plate Ultra II PCP[10] | [11] | CLD 23 | ZINC | |
[1] Colors: B62H210 gold (primer), B62L210 blue (primer), B62W212 ultrawhite (topcoat), B62W210 white (topcoat), B62W211 white (topcoat), B62HW0211 Tannery (topcoat), B62V210 hardener, or B62V211 hardener. Number of Coats: 2 Sequence of Coats: Primer, Topcoat Maximum Field Use Dry Thickness (in mils): Primer 10, Topcoat 14 Maximum Thinner: None Recoat Cure Time and Temperature: 16 hours at 77°F Final Cure Time and Temperature: 4 days at 77°F Special Comments: Up to 1.5 fl oz of AC0009736 Green or AC0030091 Black may be added to 5 gal. of mixed product. Mix ratio of Part A:Part B is 4:1 by volume. Colors: B62H210 Gold (Primer), B62W210 White (Topcoat), B62W212 UltraWhite (topcoat), B62L210 Blue (Primer), B62W211 White (Topcoat), B62HW0211 Tannery (Topcoat), B62V210 Hardener or B62V211 Hardener Number of Coats: 1 - 3 Sequence of Coats: B62W210 (for coat 1); BW2W210, BW2W211 or B62HW0211 (for coats 2 & 3 if used) Maximum Field Use Dry Film Thickness (in mils): 50 Maximum Thinner: None Recoat Cure Time and Temperature: 16 hours at 77°F Final Cure Time and Temperature: 4 days at 77°F Special Comments: Up to 1.5 fl oz of AC0009736 Green or AC0030091 Black may be added to 5 gal. of mixed product. Mix ratio of Part A:Part B is 4:1 by volume. [2] Colors: White, Blue, Beige, Dark Red, Gray, Black Number of Coats: 1-3 Maximum Field Use Dry Thickness(in mils): 28 mils. Max DFT of 1 coat is 15 mils. Maximum Thinner: 10% R7K11 Recoat Cure Time and Temperature: 18 hours at 40F Final Cure Time/Temperature: 7 days at 40F Special Comments: Mix ratio is 1:1 by volume [4] Coatings with a 24 hour final cure time are Certified for use on tanks >= 100 gallons and pipes >= 12". Coatings with a 10 day final cure time are Certified for use on pipes >= 6". [5] Colors: Blue, white Number of Coats: 1 - 2 Sequence of Coats: Any Maximum Field Use Dry Film Thickness (in mils): 50 for tanks >= 100 gallons and pipes >= 12" Maximum Thinner: None Recoat Cure Time and Temperature: 1 hour at 77°F Final Cure Time and Temperature: 24 hours at 77°F for coating tanks >= 100 gallons and pipes >= 12" Special Comments: Mix ratio of Part A:Part B is 1:1 by volume. [6] Colors: B65G10 Gray/Green, B65G11 Gray/Green, B65RX11 Red, B65RW11 Red Number of Coats: 1 Sequence of Coats: Primer, Topcoat (if applicable) Maximum Field Use Dry Film Thickness (in mils): 6 Maximum Thinner: 10% of R7K15 Recoat Cure Time and Temperature: 12 hours at 77°F when used as a primer Final Cure Time and Temperature: 7 days at 77°F when used as a topcoat Special Comments: This primer is Certified as both a single layer and as a primer under a topcoat. B65G10 Mix ratio of A:F is 6.8:21.8 by weight. B65G11, B65RW11 and B65RX11 are a one component material and only needs the thinner added. [7] Certified for use as a single coat in tanks >= 250,000 gallons. Certified for use as a primer in any NSF Certified Sherwin-Williams topcoat system in tanks 20,000 gallons and greater. [8] Certified for the following sizes: >= 200,000 gallons as a single layer topcoat >= 4,000 gallons as a primer with any NSF Certified Sherwin-Williams topcoat [9] Colors: Green Number of Coats: 1 Sequence of Coats: Primer, topcoat (if applicable) Maximum Field Use Dry Film Thickness (in mils): 4 Maximum Thinner: Up to 10% by volume of Reducer R7K111 Recoat Cure Time and Temperature: 12 hours at 77°F when used as a primer Final Cure Time and Temperature: 7 days at 77°F when used as a top coat Special Comments: This primer is Certified as both a single layer (a top coat) and as a primer under a topcoat. Mix ratio of Part A (Binder): Part F (Zinc Dust) is 1.76 gallons: 73 pounds. Kits are supplied premeasured. [10] Colors: Gray Number of Coats: 1 Sequence of Coats: Primer, Topcoat Maximum Field Use Dry Film Thickness (in mils): 1.5 Maximum Thinner: 25% R7K58 by weight Recoat Cure Time and Temperature: 7 days at 77°F Special Comments: Certified as a primer under any NSF Certified top coat. The top coat must be used at its Certified end use. Mix ratio of Part A (Binder): Part B (Paste) is 1.74:1 by volume. Kits are supplied premeasured. [11] Certified for tanks 200,000 gallons or greater when used as a primer under any NSF Certified Sherwin-Williams Coating. |
Number of matching Manufacturers is 3
Number of matching Products is 8
Processing time was 2 seconds