NSF Product and Service Listings

[1] Certified for a maximum surface area to volume ratio of 0.8 sq. in./L when used at Cold
    (23°C) temperature.

[1] Certified for a maximum surface area to volume ratio of 0.3 sq. in./L when used at
    Commercial Hot (82°C) temperature.
[2] Certified for a maximum surface area to volume ratio of 0.8 sq. in./L when used at Cold
    (23°C) temperature.

[1] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 2.0 square inches/L.
[2] Certified for a maximum surface area to volume ration of 2.0 square inches/L.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 2.0 square inches/L.
[2] Certified for a maximum surface area to volume ration of 2.0 square inches/L.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 0.2 square inches/L.
[2] Certified for a maximum surface area to volume ratio of 2.0 square inches/L.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 0.2 square inches/L.
[2] Certified for a maximum surface area to volume ratio of 2.0 square inches/L.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] Certified for product with the following densities and reaction speeds:
    2 pounds per cubic foot (regular speed)
    2 pounds per cubic foot (fast speed)
    3 pounds per cubic foot (regular speed)
    3 pounds per cubic foot (fast speed)
    4 pounds per cubic foot (slow speed)
    4 pounds per cubic foot (regular speed)
    4 pounds per cubic foot (fast speed)
    5 pounds per cubic foot (regular speed)
    6 pounds per cubic foot (regular speed)
    
    Mix ratio is 1:1 (A:B) by volume or 8.1:6.9 (A:B) by weight.
    Minimum cure time is 60 minutes at ambient temperatures.
[2] Certified for a maximum surface area to volume ratio of 0.375 square inches per liter.

[1] Certified for product with the following densities and reaction speeds:
    2 pounds per cubic foot (regular speed)
    2 pounds per cubic foot (fast speed)
    3 pounds per cubic foot (regular speed)
    3 pounds per cubic foot (fast speed)
    4 pounds per cubic foot (slow speed)
    4 pounds per cubic foot (regular speed)
    4 pounds per cubic foot (fast speed)
    5 pounds per cubic foot (regular speed)
    6 pounds per cubic foot (regular speed)
    
    Mix ratio is 1:1 (A:B) by volume or 8.1:6.9 (A:B) by weight.
    Minimum cure time is 60 minutes at ambient temperatures.
[2] Certified for a maximum surface area to volume ratio of 0.375 square inches per liter.

[1] Certified for a maximum surface area to volume ratio of 0.3 sq. in./L in pipe or 1% of a
    20,000 gallon tank.
[2] To obtain the proper mix, use at least a 3/4" length, but no more than 1/3 of a full
    stick, of product which has been cut with a knife. Product must be mixed for 60-90
    seconds.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] Certified for a maximum of 18.5 joints per liter.

[1] Certification is based on a minimum cure of 72 hours at 75°F.

[1] Certified for use as an anchoring adhesive for installing thread rods (less than or
    equal to 1.3 inches in diameter) in concrete or masonry for water treatment applications.

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] Certified for use as an anchoring adhesive for installing thread rods (less than or
    equal to 1.3 inches in diameter) in concrete or masonry for water treatment applications.

[1] Certified for a maximum surface area to volume ratio of 2.0 sq. in./L.

[1] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 2.0 square inches/L.
[2] Certified for a maximum surface area to volume ratio of 2.0 sq. in./L.
[3] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 0.2 sq. in./L.

[1] This product is also evaluated for use in Mechanical Plumbing Device applications with a
    maximum use restriction of 10.0 sq. in./L.
[2] Certified for a maximum surface area to volume of 10 sq. in./L.

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] Certified for a maximum surface area to volume ratio of 2.0 square inches/L.

[1] Certified for a maximum surface area to volume ratio of 2.0 square inches/L.

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] Only products bearing the NSF Mark on the product, product packaging, and/or
    documentation shipped with the product are Certified.

[1] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 0.2 sq. in./L.
[2] Certified for a maximum surface area to volume ratio of 2.0 square inches per liter.
[3] This product is also evaluated for use in Mechanical Plumbing Device applications with a
    maximum use restriction of 1.1 square inches/L.
[5] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 0.1 sq. in./L.
[6] Certified for a maximum surface area to volume ratio of 1 square inches/L.
[8] Certified for a maximum surface area to volume ratio of 1.6 sq. in./L.
[9] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 0.15 square inches/L.
[10] Certified for a maximum surface area to volume ratio of 1.5 square inches/L.

[2] Certified for a maximum surface area to volume ratio of 2.0 square inches per liter.
[3] This product is also evaluated for use in Mechanical Plumbing Device applications with a
    maximum use restriction of 1.1 square inches/L.

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] Certified for a maximum surface area to volume ratio of 2.0 sq. in./L.

[1] Certified for a maximum surface area to volume ratio of 2.0 sq. in./L.

[1] Certified for a maximum surface area to volume ratio of 3.0 square inches/L.
[2] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 3.0 square inches/L.

[1] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 2.0 sq. in./L.
[2] Certified for a maximum surface area to volume ratio of 2.0 sq. in./L.

[1] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 2.0 sq. in./L.
[2] Certified for a maximum surface area to volume ratio of 2.0 sq. in./L.

[1] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 2.0 sq. in./L.
[2] Certified for a maximum surface area to volume ratio of 2.0 sq. in./L.
[3] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 1.1 sq. in./L.
    
[4] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 1.5 sq. in./L.
[5] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 1.7 sq. in./L.

[1] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 2.0 sq. in./L.
[2] Certified for a maximum surface area to volume ratio of 2.0 sq. in./L.
[3] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 1.1 sq. in./L.
    
[4] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 1.5 sq. in./L.
[5] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 1.7 sq. in./L.

[1] Certified for a maximum surface area to volume ratio of 6.0 sq.in./L.
[2] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 2.0 sq.in./L.
[3] Certified for a maximum surface area to volume ratio of 2.0 sq.in./L.

[1] Certified for a maximum surface area to volume ratio of 6.0 sq.in./L.
[2] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 2.0 sq.in./L.
[3] Certified for a maximum surface area to volume ratio of 2.0 sq.in./L.

[1] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 2.0 sq. in./L.
[2] Certified for a maximum surface area to volume ratio of 2.0 sq. in./L.
[3] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 1.5 sq. in./L.
[4] his product has also been evaluated with the use of a lubricant, Mountfit SAGB 4025.
[5] Certified for a maximum surface area to volume ratio of 6.0 square inches/L.

[1] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 2.0 sq. in./L.
[2] Certified for a maximum surface area to volume ratio of 2.0 sq. in./L.
[3] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 1.5 sq. in./L.
[4] his product has also been evaluated with the use of a lubricant, Mountfit SAGB 4025.

[1] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 1.5 sq. in./L.
[2] Certified for a maximum surface area to volume ratio of 1.1 sq. in./L.
[3] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 2 sq. in./L.
[4] Certified for a maximum surface area to volume ratio of 2.0 sq. in./L.

[1] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 1.5 sq. in./L.
[2] Certified for a maximum surface area to volume ratio of 1.1 sq. in./L.
[3] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 2 sq. in./L.
[4] Certified for a maximum surface area to volume ratio of 2.0 sq. in./L.

[1] Certified for a maximum SA/V of 0.25 sq. in./L in pipes and tanks.

[1] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 2.0 sq. in./L.
[2] Certified for a maximum surface area to volume ratio of 2.0 sq. in./L.
[3] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 0.1 sq. in./L.

[1] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 2.0 sq. in./L.
[2] Certified for a maximum surface area to volume ratio of 2.0 sq. in./L.
[3] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 0.1 sq. in./L.

[1] This product has also been evaluated for use in Mechanical Plumbing Device application
    with a maximum use restriction of 2.0 sq. in./L.
[2] Certified for a maximum surface area to volume ratio of 2.0 sq. in./L.

[1] This product has also been evaluated for use in Mechanical Plumbing Device application
    with a maximum use restriction of 2.0 sq. in./L.
[2] Certified for a maximum surface area to volume ratio of 2.0 sq. in./L.

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] A - Material Thickness
[2] Certified for a maximum surface area to volume ratio of 1.1 square inches/L.
[3] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 0.2 square inches/L.
[4] Certified for a maximum surface area to volume ratio of 2.0 square inches/L.

[1] A - Material Thickness
[2] Certified for a maximum surface area to volume ratio of 1.1 square inches/L.
[3] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 0.2 square inches/L.
[4] Certified for a maximum surface area to volume ratio of 2.0 square inches/L.

[1] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 0.1 sq. in./L.
[2] Certified for a maximum surface area to volume ratio of 2.0 sq. in./L.
[3] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 2.0 sq. in./L.

[1] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 0.1 sq. in./L.
[2] Certified for a maximum surface area to volume ratio of 2.0 sq. in./L.
[3] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 2.0 sq. in./L.

[1] Certified for a maximum surface area to volume ratio of 2.0 sq. in./L.
[2] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 2.0 square inches/L.
[3] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 0.9 square inches/L.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] Certified for a maximum surface area to volume ratio of 2.0 sq. in./L.
[2] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 2.0 square inches/L.
[3] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 0.9 square inches/L.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] Certified for use as an anchoring adhesive for installing thread rods (less than or
    equal to 1.3 inches in diameter) in concrete or masonry for water treatment applications.

[1] Certified for a maximum surface area to volume ratio of 0.05 sq. in./L.

[1] Certified for a maximum surface area to volume ratio of 0.05 sq. in./L.

[1] Certified for a maximum SA/V of 0.25 sq. in./L in pipes and tanks.

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] The compliance of this product with the health effect requirements of NSF/ANSI/CAN 61
    was determined based on the testing of pipe and fittings assembled using the cement and
    the CONTACT 212 or CONTACT 211 primer.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] Certified for a maximum SA/V of 0.25 sq. in./L in pipes and tanks.

[1] Certified for use as an anchoring adhesive for installing thread rods (less than or
    equal to 1.3 inches in diameter) in concrete or masonry for water treatment applications.

[1] Certification includes profiles Type 2 Through Type 3100.
[2] Only products bearing the NSF Mark on the product, product packaging, and/or
    documentation shipped with the product are Certified.
[3] Certified for use as a waterstop in any potable water treatment or retaining structure
    not to exceed 10% of a 700 gallon or greater tank.

[1] Certified for a maximum use level of 40 oz/100 lbs cement.

[1] Certified or use as an anchoring adhesive for installing thread rods (less than or equal
    to 1.3 inches in diameter) in concrete or masonry for water treatment applications.

[1] Certified for a maximum surface area to volume ratio of 2.0 sq. in./L.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] Certified for a maximum surface area to volume ratio of 14.5 square inches/L.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] Certified for a maximum surface area to volume ratio of 14.5 sq. in./L.
[2] Certified for a maximum surface area to volume ratio of 0.4 sq. in./L.

[1] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 14.5 sq. in./L.  Certified product requires a
    post-cure of 4 hours at 200°C.
[2] Certified for a maximum surface area to volume ratio of 14.5 sq. in./L.

[1] Certified for a maximum surface area to volume ratio of 2.0 sq. in./L.

[1] Certified for a maximum surface area to volume ratio of 2.0 sq. in./L.

[1] Certified for a maximum surface area to volume ratio of 40 sq. in./L.

[1] Certified for a maximum surface area to volume ratio of 40 sq. in./L.

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] The compliance of this product with the health effect requirements of NSF/ANSI/CAN 61
    was determined based on the testing of pipe and fittings assembled using the cement and
    i-Fuse Clear or Purple Primers.
[2] The compliance of this product with the health effects requirements of NSF/ANSI/CAN 61
    was determined based on the testing of pipe and fittings assembled using the cement and
    i-Fuse Blue primer.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] The exposed surface area of each sealant in a household distribution system shall not
    exceed 1.3 sq. cm/L or .2 sq. in./L.

[1] The exposed surface area of each sealant in a household distribution system shall not
    exceed 1.3 sq. cm/L or .2 sq. in./L.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] Certified for use with pipes 1/2" and greater.

[2] Listed models have lot #503311 or greater.

[1] Certified for a maximum surface area to volume ratio of 0.07 square inches/L.
[2] "X" before the trade name represents any alphanumeric character.

[1] Certified for a maximum surface area to volume ratio of 0.07 square inches/L.
[2] "X" before the trade name represents any alphanumeric character.

[1] Certified for a maximum surface area to volume ratio of 1.3 square inches/L.
[2] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 2.0 square inches/L.
[3] Certified for a maximum surface area to volume ratio of 2.0 square inches/L.
[4] Certified for a maximum surface area to volume ratio of 1.0 square inches/L.
[5] Certified for a maximum surface area to volume ratio of 0.6 square inches/L.
[6] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 0.18 sq. in./L.
[7] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 1.0 sq. in./L.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] Certified for a maximum surface area to volume ratio of 1.3 square inches/L.
[2] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 2.0 square inches/L.
[3] Certified for a maximum surface area to volume ratio of 2.0 square inches/L.
[4] Certified for a maximum surface area to volume ratio of 1.0 square inches/L.
[5] Certified for a maximum surface area to volume ratio of 0.6 square inches/L.
[6] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 0.18 sq. in./L.
[7] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 1.0 sq. in./L.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] Certified for a maximum surface area to volume ratio of 1.3 sq. in./L.
[2] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 2.0 sq. in./L.
[3] Certified for a maximum surface area to volume ratio of 2.0 sq. in./L.
[4] Certified for a maximum surface area to volume ratio of 1 sq. in./L.
[5] Certified for a maximum surface area to volume ratio of 1.5 sq. in./L.
[6] Certified for a maximum surface area to volume ratio of 0.6 sq. in./L.
[7] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 0.18 sq. in./L.
[8] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 1.0 sq. in./L.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] Certified for a maximum surface area to volume ratio of 1.3 sq. in./L.
[2] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 2.0 sq. in./L.
[3] Certified for a maximum surface area to volume ratio of 2.0 sq. in./L.
[6] Certified for a maximum surface area to volume ratio of 0.6 sq. in./L.
[7] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 0.18 sq. in./L.
[8] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 1.0 sq. in./L.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[2] Certified for use as an anchoring adhesive for installing threaded rods (less than or
    equal to 6 mm - 36mm in diameter) in concrete for water treatment applications.

[1] This product is also evaluated for use in Mechanical Plumbing Device applications with a
    maximum use restriction of 10.0 sq. in./L.
[2] Certified for a maximum surface area to volume of 10 sq. in./L.

[1] This product is also evaluated for use in Mechanical Plumbing Device applications with a
    maximum use restriction of 10.0 sq. in./L.
[2] Certified for a maximum surface area to volume of 10 sq. in./L.

[1] Only products bearing the NSF Mark on the product, product packaging, and/or
    documentation shipped with the product are Certified.
[2] Certified for a maximum surface area to volume ratio of 2.0 sq. in./L.
[3] Evaluated for use in Mechanical Plumbing Device applications with a maximum use
    restriction of 2.0 square inches/L.

[1] Certified for a maximum surface area to volume ratio of 2.0 sq. in./L.
[2] Evaluated for use in Mechanical Plumbing Device applications with a maximum use
    restriction of 2.0 square inches/L.

[1] Certified for a maximum surface area to volume ratio of 7.27 sq. in./L.
[2] Certified for pipes >= 1/2".

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 4.0 sq. in./L.
[2] PTFE FE 1000 includes both finished parts machined by GAPI S.p.A and semi-finished PTFE
    shapes molded or extruded by GAPI S.p.A.  Parts machined from semi-finished PTFE shapes
    by entities other than GAPI S.p.A will not be NSF Certified and may not bear the NSF
    mark without prior authorization from NSF International.
[3] Only products bearing the NSF Mark on the product, product packaging, and/or
    documentation shipped with the product are Certified.
[4] Certified for a maximum surface area to volume ratio of 4.0 sq. in./L.

[1] Certified for a maximum surface area to volume ratio of 2.0 sq. in./L.
[2] Certified for distribution systems only, with width exposures of no more than 1/2" in
    pipes with diameters shown in 'Size'.
[3] Complies with US EPA Maximum Contaminant Levels (MCLs) for PFAS according to
    NSF/ANSI/CAN 61.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.