NSF Product and Service Listings

[1] Certified for a maximum surface area to volume ratio of 0.8 sq. in./L when used at Cold
    (23°C) temperature.

[1] Certified for a maximum surface area to volume ratio of 0.8 sq. in./L when used at Cold
    (23°C) temperature.

[1] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 2.0 square inches/L.
[2] Certified for a maximum surface area to volume ration of 2.0 square inches/L.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 0.2 square inches/L.
[2] Certified for a maximum surface area to volume ratio of 2.0 square inches/L.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 0.2 sq. in./L.
[2] Certified for a maximum surface area to volume ratio of 2.0 sq. in./L.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] This product is also evaluated for use in Mechanical Plumbing Device applications with a
    maximum use restriction of 10.0 sq. in./L.
[2] Certified for a maximum surface area to volume of 10 sq. in./L.

[1] Certified for a maximum surface area to volume ratio of 2.0 sq. in./L.

[1] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 0.1 sq. in./L.
[2] Certified for a maximum surface area to volume ratio of 2.0 sq. in./L.

[1] Certified for a maximum surface area to volume ratio of 2.0 square inches/L.

[1] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 2.0 sq. in./L.
[2] Certified for a maximum surface area to volume ratio of 2.0 sq. in./L.

[1] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 2.0 sq. in./L.
[2] Certified for a maximum surface area to volume ratio of 2.0 sq. in./L.
[3] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 9 sq. in./L.
[4] Product may be coated with Art-Coat Treatment
[5] Certified for a maximum surface area to volume ratio of 30.0 sq. in./L.
[6] Certified for a maximum surface area to volume ratio of 14 sq. in./L. 

[1] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 2.0 square inches/L.
[2] Certified for a maximum surface area to volume ratio of 2.0 square inches/L.

[1] Certified for a maximum surface area to volume ratio of 2.0 sq. in./L.

[1] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 0.2 sq. in./L.
[2] Certified for a maximum surface area to volume ratio of 2.0 sq. in./L.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 0.2 sq. in./L.
[2] Certified for a maximum surface area to volume ratio of 2.0 square inches per liter.
[3] This product is also evaluated for use in Mechanical Plumbing Device applications with a
    maximum use restriction of 1.1 square inches/L.
[5] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 0.1 sq. in./L.
[6] Certified for a maximum surface area to volume ratio of 1 square inches/L.
[8] Certified for a maximum surface area to volume ratio of 1.6 sq. in./L.
[9] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 0.15 square inches/L.
[10] Certified for a maximum surface area to volume ratio of 1.5 square inches/L.

[1] Certified for a maximum surface area to volume ratio of 2.0 sq. in./L.

[1] Certified for a maximum surface area to volume ratio of 2.0 sq. in./L.

[1] Certified for a maximum surface area to volume ratio of 3.0 square inches/L.
[2] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 3.0 square inches/L.

[1] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 2.0 sq. in./L.
[2] Certified for a maximum surface area to volume ratio of 2.0 sq. in./L.

[1] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 2.0 sq. in./L.
[2] Certified for a maximum surface area to volume ratio of 2.0 sq. in./L.
[3] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 1.1 sq. in./L.
    
[4] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 1.5 sq. in./L.
[5] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 1.7 sq. in./L.

[1] Certified for a maximum surface area to volume ratio of 6.0 sq.in./L.
[2] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 2.0 sq.in./L.
[3] Certified for a maximum surface area to volume ratio of 2.0 sq.in./L.

[1] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 2.0 sq. in./L.
[2] Certified for a maximum surface area to volume ratio of 2.0 sq. in./L.
[3] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 1.5 sq. in./L.
[4] his product has also been evaluated with the use of a lubricant, Mountfit SAGB 4025.
[5] Certified for a maximum surface area to volume ratio of 6.0 square inches/L.

[1] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 1.5 sq. in./L.
[2] Certified for a maximum surface area to volume ratio of 1.1 sq. in./L.
[3] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 2 sq. in./L.
[4] Certified for a maximum surface area to volume ratio of 2.0 sq. in./L.

[1] Certified for a maximum surface area to volume ratio of 2.0 sq. in./L.

[1] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 2.0 sq. in./L.
[2] Certified for a maximum surface area to volume ratio of 2.0 sq. in./L.
[3] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 0.1 sq. in./L.

[1] This product has also been evaluated for use in Mechanical Plumbing Device application
    with a maximum use restriction of 2.0 sq. in./L.
[2] Certified for a maximum surface area to volume ratio of 2.0 sq. in./L.

[1] Certification does not include lubricants or sealants.
    HYDROTITE-CJ-0720-2K-AD-EX, HYDROTITE-CJ-0725-3K-AD-EX, HYDROTITE-CJ-1020-2K-AD-EX,
    HYDROTITE-CJ-0720-2K-AD-SIKAEX, HYDROTITE-CJ-0725-3K-AD-SIKAEX,
    HYDROTITE-CJ-1020-2K-AD-SIKAEX include adhesive on one side.
[2] Certified for a maximum surface area to volume ratio of 0.06 sq. in./L.

[1] A - Material Thickness
[2] Certified for a maximum surface area to volume ratio of 1.1 square inches/L.
[3] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 0.2 square inches/L.
[4] Certified for a maximum surface area to volume ratio of 2.0 square inches/L.

[1] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 0.1 sq. in./L.
[2] Certified for a maximum surface area to volume ratio of 2.0 sq. in./L.
[3] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 2.0 sq. in./L.

[1] Certified for a maximum surface area to volume ratio of 2.0 sq. in./L.
[2] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 2.0 square inches/L.
[3] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 0.9 square inches/L.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] Certified for a maximum surface area to volume ratio of 0.5 sq. in./L.
[2] Certified for a maximum surface area to volume ratio of 1.5 sq. in./L.
[3] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 0.1 sq. in./L.

[1] Certified for a maximum surface area to volume ratio of 2.0 sq. in./L.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] Certified for a maximum surface area to volume ratio of 2.0 square inches/L.

[1] Certified for a maximum surface area to volume ratio of 2.0 sq. in./L
[2] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 2.0 sq. in./L.
[3] Certified for a maximum suface area to volume ratio of 20 sq. in./L.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 2.5 sq. in./L.
[2] Certified for a maximum surface area to volume ratio of 2.5 square inches/L.
[3] Certified for a maximum surface area to volume ratio of 2.0 sq. in./L.
[4] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 2.0 sq. in./L.

[1] Certified for a maximum surface area to volume ratio of 2.0 sq. in./L.
[2] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 2.0 sq. in./L.

[1] Certified for a maximum surface area to volume ratio of 1 sq. in./L.
[2] Certified for a maximum surface area to volume ratio of 2.0 sq. in./L.
[3] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum surface area to volume ratio of 2.0 sq. in./L.
[4] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 0.9 sq. in./L.
[5] Certified for a maximum surface area to volume ratio of 1.3 sq. in./L.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] Certified for a maximum surface area to volume ratio of 2.0 sq. in./L.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1]  Certified for use in water softeners at a maximum surface area to volume ratio of 21
    square inches/L.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] Certified for a maximum surface area to volume ratio of 2.0 sq. in./L.

[1] Certified for a maximum surface area to volume ratio of 0.8 sq. in./L.

[1] Certified for a maximum surface area to volume ratio of 2 square inches/L.

[1] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum surface area to volume ratio of 5.6 sq. in./L.
[2] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum surface area to volume ratio of 2.0 sq. in./L.
[3] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum surface area to volume ratio of 10 sq. in./L.
[4] This product is Certified for the following colors:
    Transparent (no color), White, Black, Red, Red 3000, Blue, Yellow, Light green, Dark
    green, Light grey, and Dark grey
    Numbers /20 to /80 in the Trade Designation represent the shore hardness

[1] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 0.1 sq. in./L.
[2] Certified for a maximum surface area to volume ratio of 1 sq. in./L.

[1] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 2.0 square inches/L.
[2] Certified for a maximum surface area to volume ratio of 2.0 square inches/L.
[3] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 0.5 square inches/L.

[1] Certified for a maximum surface area to volume ratio of 1.3 square inches/L.
[2] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 2.0 square inches/L.
[3] Certified for a maximum surface area to volume ratio of 2.0 square inches/L.
[4] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 1.0 sq. in./L.
[5] Certified for a maximum surface area to volume ratio of 0.6 square inches/L.
[6] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 0.18 sq. in./L.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] Certified for a maximum surface area to volume ratio of 1.3 sq. in./L.
[2] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 2.0 sq. in./L.
[3] Certified for a maximum surface area to volume ratio of 2.0 sq. in./L.
[4] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 1.0 sq. in./L.
[5] Certified for a maximum surface area to volume ratio of 1 sq. in./L.
[6] Certified for a maximum surface area to volume ratio of 0.6 sq. in./L.
[7] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 0.18 sq. in./L.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] Certified for a maximum surface area to volume ratio of 2.0 sq. in./L.

[1] Certified for a maximum surface area to volume ratio of 2.0 sq. in./L.

[1] This product is also evaluated for use in Mechanical Plumbing Device applications with a
    maximum use restriction of 10.0 sq. in./L.
[2] Certified for a maximum surface area to volume of 10 sq. in./L.

[1] This product is also evaluated for use in Mechanical Plumbing Device applications with a
    maximum use restriction of 10.0 sq. in./L.
[2] Certified for a maximum surface area to volume of 10 sq. in./L.

[1] Only products bearing the NSF Mark on the product, product packaging, and/or
    documentation shipped with the product are Certified.
[2] Certified for a maximum surface area to volume ratio of 0.3 square inches/L.

[1] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 4.0 sq. in./L.
[2] PTFE FE 1000 includes both finished parts machined by GAPI S.p.A and semi-finished PTFE
    shapes molded or extruded by GAPI S.p.A.  Parts machined from semi-finished PTFE shapes
    by entities other than GAPI S.p.A will not be NSF Certified and may not bear the NSF
    mark without prior authorization from NSF International.
[3] Only products bearing the NSF Mark on the product, product packaging, and/or
    documentation shipped with the product are Certified.
[4] Certified for a maximum surface area to volume ratio of 4.0 sq. in./L.

[1] Certified for a maximum surface area to volume ratio of 2.0 sq. in./L.
[2] Certified for distribution systems only, with width exposures of no more than 1/2" in
    pipes with diameters shown in 'Size'.
[3] Complies with US EPA Maximum Contaminant Levels (MCLs) for PFAS according to
    NSF/ANSI/CAN 61.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] Certified for sealing the annular space between the outside of the pipe and the tank
    wall at a maximum use of 1 link per 5.8 gallons of water.

[1] Certified for a maximum width of 1/8" when used with pipes 1" - 144" in diameter.
[2] Certified for a maximum surface area to volume ratio of 2.0 square inches/L.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum surface area to volume ratio of 2.0 sq. in./L.
[2] Certified for a maximum surface area to volume ratio of 2.0 sq. in./L.
[3] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum surface area to volume ratio of 0.3 sq. in./L.
[4] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum surface area to volume ratio of 0.2 sq. in./L.
[5] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum surface area to volume ratio of 0.3 sq. in./L.

[1] Certified for a maximum surface area to volume ratio of 2.0 sq.in./L.
[2] Evaluated as material for use in mechanical plumbing devices for applications with a
    maximum of 2.0 square inchs per liter.
[3] Evaluated as material for use in mechanical plumbing devices for applications with a
    maximum of 0.4 square inchs per liter.
[4] Evaluated as material for use in mechanical plumbing devices for applications with a
    maximum of 0.6 square inchs per liter.
[5] Certified for a maximum surface area to volume ratio of 0.33 sq.in./L.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] Certified for a maximum surface area to volume ratio of 2.0 sq. in./L.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] GDE 6311 and GDE 7133 compounds are molded into gaskets and o-ring seals. Certified for
    a maximum surface area to volume ratio of 10 square inches/L.
[2] GDE 6311 and GDE 7133 are molded into gaskets and o-ring seals. Certification requested
    for a maximum surface area to volume ratio of 21 square inches/L.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] Certified for a maximum width of 1/8" when used with 1"-144" diameter pipe.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 7.75 sq. in./L.
[2] Certified for a maximum surface area to volume ratio of 7.75 sq. in./L.

[1] Certified for a maximum surface area to volume ratio of 4.0 square inches/L.

[1] Certified for a maximum surface area to volume ratio of 6 square inches/L.
    This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 3.5 square inches/L.

[2] Certified for a maximum surface area to volume ratio of 2.0 sq. in./L.
[3] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum surface area to volume ratio of 1.0 sq. in./L.

[1] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 6.0 sq. in./L.
[2] Certified for a maximum surface area to volume ratio of 6.0 sq. in./L.
[3] Certified for a maximum surface area to volume ratio of 2.0 sq. in./L.
[4] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum surface area to volume ratio of 1.0 sq. in./L.
[5] Certified for a maximum surface area to volume ratio of 5.0 sq. in./L.
[6] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 3.4 sq. in./L.
[7] Certified for a maximum surface area to volume ratio of 3.4 sq. in./L

[1] Certified for a maximum surface area to volume ratio of 2.0 square inches/L.
[2] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 2.0 square inches/L.
[3] Certified for a maximum surface area to volume ratio of 6.0 square inches/L.
[4] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 6.0 square inches/L.

[1] Certified for a maximum surface area to volume ratio of 2.0 sq. in./L.
[3] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum surface area to volume ratio of 3.4 sq. in./L
[4] Certified for a maximum surface area to volume ratio of 3.4 sq. in./L
[5] This product has been evaluated for use in Mechanical Plumbing Device applications with
    a maximum use restriction of 2.0 sq. in./L.
[6] This product has been evaluated for use in Mechanical Plumbing Device applications with
    a maximum use restriction of 6.0 sq. in/L.
[7] Certified for a maximum surface area to volume ratio of 6.0 sq. in./L.
[8] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 0.15 sq. in./L.
[9] Certified for a maximum surface area to volume ratio of 1.5 sq. in./L.
[10] Certified for a maximum surface area to volume ratio of 5.0 sq. in./L.
[11] Certified for a maximum surface area to volume ratio of 1.1 sq. in/L.

[1] Certified for a maximum surface area to volume ratio of 2.0 sq. in./L.
[2] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 2.0 square inches/L.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] Certified for a maximum surface area to volume ratio of 2.0 sq.in./L.
[2] Evaluated as material for use in mechanical plumbing devices for applications with a
    maximum of 0.4 square inchs per liter.

[1] Includes Compound 20000063 (800566).
[2] Certified for a maximum surface area to volume ratio not to exceed 0.127 sq. in./L.
[3] Includes Compound 20000051 (800366).
[4] Certified for a maximum surface area to volume ratio not to exceed 0.4 sq. in./L.
[5] Includes Compound 20000004 (800664).
[6] Includes Compound 800369.
[7] Certified for a maximum surface area to volume ratio not to exceed 0.013 sq. in./L.
[8] Includes compound 20000050 (800365).
[9] Certified for a maximum surface area to volume ratio not to exceed 0.064 sq. in./L.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.
[10] Includes compound 20000042 (800667).
[11] Gaskets are Certified for use in pipes 14" through 27" with a maximum gap of 1/16", 30"
     to 54" with a maximum gap of 1/8", 60" and greater with a maximum gap of 1/4", or a
     maximum surface-area-to-volume ratio of 0.005 sq. in./L. Includes gaskets produced using
     compound 20000027 (800260 REV.5).

[1] Certified for use in fittings for 4" and greater with up to two gasket assemblies per
    fitting.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] Certified for use with pipes >=1/4".

[1] Certified for use with pipes >=1/4".

[1] Certified for a maximum surface area to volume ratio of 2.0 sq. in./L.
[1] Certified for a maximum surface area to volume ratio of 2.0 sq. in./L.
[2] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 2.0 square inches/L.
[2] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 2.0 square inches/L.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] Certified for a maximum surface area to volume ratio of 2.0 square inches/L.
[2] Certified for a maximum surface area to volume ratio of 0.25 square inches/L.

[1] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 0.1 sq. in/L.
[2] Certified for a maximum surface area to volume ratio of 2.0 sq. in./L.
[3] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 0.2 sq. in/L.
[4] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 0.15 sq. in./L.
[5] Certified for a maximum surface area to volume ratio of 1.2 sq. in./L.
[6] SI-XXY
    XX - Shore A - 30, 40, 50, 60, 70, 80, 90
    Y - Colour
    T - Translucent
    R - Red
    B - Blue
[7] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 5.0 sq. in./L.
[8] Certified for a maximum surface area to volume ratio of 5.0 sq. in./L.
[9] Certified for a maximum surface area to volume ratio of 1.0 sq. in./L.
[10] This product has also been evaluated for use in Mechanical Plumbing Device applications
     with a maximum use restriction of 0.5 sq. in./L.
[11] This product has also been evaluated for use in Mechanical Plumbing Device applications
     with a maximum use restriction of 0.15 sq. in./L.

[1] Certified for a maximum surface area to volume ratio of 2.0 sq. in./L.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.