NSF Product and Service Listings

These NSF Official Listings are current as of Sunday, November 22, 2026 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.

Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/PwsComponents/Listings.asp?TradeName=f&StandardExt=MDS&



NSF/ANSI/CAN 61
Drinking Water System Components - Health Effects

NOTE: Unless otherwise indicated for Materials, Certification is only for the Water Contact Material shown in the Listing. Click here for a list of Abbreviations used in these Listings. Click here for the definitions of Water Contact Temperatures denoted in these Listings. Products certified to NSF/ANSI/CAN 61 comply with the health effects criteria in NSF/ANSI/CAN 600.


 
A. O. Smith Enterprises Ltd. 
768 Erie Street
P.O. Box 310 
Stratford, ON N5A 6T3 
Canada 
519-271-5800


Facility : Stratford, Ontario, Canada

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Pressurized Water Storage Tanks[1] [G]
A O Smith (LPT Prefix) 119 gal. CLD 23 MLTPL
A O Smith ProMax (PM, PMX, PMXP and PMXE Prefix) 14 - 119 gal. CLD 23 MLTPL
A Y McDonald (16 Prefix) 119 gal. CLD 23 MLTPL
American Water Heater (APT Prefix) 14 - 119 gal. CLD 23 MLTPL
Gould Pumps Hydro Pro Water Systems Tanks (V Prefix) 14 - 119 gal. CLD 23 MLTPL
Pump Pro (PP Prefix) >= 14 gal. CLD 23 MLTPL
Reliance (PMD Prefix) 119 gal. CLD 23 MLTPL
State (MPT Prefix & SSB Prefix) >= 85 gal. CLD 23 MLTPL
Trident Ultra (TDU and TD Prefix) >= 14 gal. CLD 23 MLTPL
Xylem Hydro Pro Water System Tanks (V Prefix) 14 - 119 gal. CLD 23 MLTPL

[1] Product also complies with NSF/ANSI 372.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

Thermal Expansion Tanks[1] [G]
Bell and Gossett (Prefix PT)[2] 14 - 86 gal. D. HOT MLTPL

[1] Product also complies with NSF/ANSI 372.
[2] Suffixes:
    blank 
    B   - Buried 
    EX  - Base extension 
    MP  - Mounted pump 
    P   - Pipe mounted 
    PST - Pump system tank
    S
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



 
ABB Ltd. 
Oldends Lane
Stonehouse, Glos 
GL10 3TA 
United Kingdom 
44 14 5382 6661


Facility : Shanghai, China

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Water Meters[1] [G]
Aquamaster FEW 40 mm - 2400 mm CLD 23 MLTPL
FEW XYZ.F 40 mm - 2400 mm CLD 23 MLTPL
ProcessMaster FEW XYZ 40 mm - 2400 mm CLD 23 MLTPL
WaterMaster FEW 40 mm - 2400 mm CLD 23 MLTPL

[1] For all meters:
    X - Type of electronics	
        4 - AquaMaster	
        5 - WaterMaster
        6 - ProcessMaster		
    Y - Tier of Electronics	
        1 - Standard Electronics
        2 - Enhanced Electronic
        3 - Advanced Electronics	
        5 - Premium Electronics	
    Z - Type of mounting	
        1 - Integral with transmitter
        2 - Remote with transmitter (Sensor + Transmitter)
        8 - Sensor only	
    Type of bore and liner	
        F - FEF/Full bore/Rubber liner
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
      documentation shipped with the product are Certified.


Facility : Karnataka, India

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Water Meters[1]
AquaMaster FEW 40-600 mm CLD 23 MLTPL
FEW XYZ.F 40-600 mm CLD 23 MLTPL
ProcessMaster FEW XYZ 40-600 mm CLD 23 MLTPL
WaterMaster FEW 40-600 mm CLD 23 MLTPL

[1] For all meters:
    X - Type of electronics
    4 - AquaMaster
    5 - WaterMaster
    6 - ProcessMaster
    Y - Tier of Electronics
    1 - Standard Electronics
    2 - Enhanced Electronics
    3 - Advanced Electronics
    5 - Premium Electronics
    Z - Type of mounting
    1 - Integral with transmitter
    2 - Remote with transmitter (Sensor + Transmitter)
    8 - Sensor only
    Type of bore and liner
    F - FEF/Full bore/Rubber liner

NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
      documentation shipped with the product are Certified.


Facility : Glos, United Kingdom

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Switches/Sensors
FEA121 - AquaProbe (with WaterMaster transmitter) 1" - 1.5" D. HOT MLTPL
FEA181 - AquaProbe (probe only) 1" - 1.5" D. HOT MLTPL
FEA221 - AquaProbe (with AquaMaster3 transmitter) 1" - 1.5" D. HOT MLTPL
FEA281 - AquaProbe (Flow sensor only) 1" - 1.5" D. HOT MLTPL
FEW xyz.A[1] 1" - 1.5" D. HOT MLTPL
WaterMaster FEA112 1" - 1.5" D. HOT MLTPL

[1] FEW XYZ A
    X - Type of electronics
        4 - AquaMaster
        5 - WaterMaster
    Y - Tier of Electronics
        1 - Standard Electronics
        2 - Enhanced Electronics
        3 - Advanced Electronics
        5 - Premium Electronics
    Z - Type of mounting
        1 - Integral with transmitter
        2 - Remote with transmitter (Sensor + Transmitter)
        8 - Sensor only

Water Meters [G]
AM-F[G] >= 2 1/2" CLD 23 MLTPL
AM-F 3/4" - 3" CLD 23 MLTPL
AM-FC 3/4" - 3" CLD 23 MLTPL
AM-FC[G] >= 2 1/2" CLD 23 MLTPL
AquaMaster FEF[4] >= 250 mm CLD 23 MLTPL
AquaMaster FER[4] 40 mm - 600 mm CLD 23 MLTPL
AquaMaster FEV[3] 40 mm - 200 mm CLD 23 MLTPL
AquaMaster FEW[2] 40 mm - 2400 mm CLD 23 MLTPL
AquaMaster FEW 40 mm - 2400 mm CLD 23 MLTPL
Aquamaster F >= 2 1/2" CLD 23 MLTPL
Aquamaster F 3/4" - 3" CLD 23 MLTPL
Aquamaster FC 3/4" - 3" CLD 23 MLTPL
Aquamaster FC >= 2 1/2" CLD 23 MLTPL
FEF[G] >= 250 mm CLD 23 MLTPL
FEP[G] 40 mm - 2400 mm CLD 23 MLTPL
FER[G] 40 mm - 600 mm CLD 23 MLTPL
FEV[G] 40 mm - 300 mm CLD 23 MLTPL
FEW[G] 40 mm - 2400 mm CLD 23 MLTPL
FEW XYZ.F[2] 40 mm - 2400 mm CLD 23 MLTPL
FEW XYZ.F 40 mm - 2400 mm CLD 23 MLTPL
FEW XYZ.R[4] 40 mm - 600 mm CLD 23 MLTPL
FEW XYZ.V[3] 40 mm - 200 mm CLD 23 MLTPL
Magmaster Loflo >= 2 1/2" CLD 23 MLTPL
Magmaster Loflo 3/4" - 3" CLD 23 MLTPL
ProcessMaster FEW XYZ[2] 40 mm - 2400 mm CLD 23 MLTPL
WaterMaster F[G] 250 mm - 2400 mm CLD 23 MLTPL
WaterMaster FEF[4] >= 250 mm CLD 23 MLTPL
WaterMaster FER[4] 40 mm - 600 mm CLD 23 MLTPL
WaterMaster FEV[3] 40 mm - 200 mm CLD 23 MLTPL
WaterMaster FEW[2] 40 mm - 2400 mm CLD 23 MLTPL

[2] For all meters:
    X - Type of electronics
        4 - AquaMaster
        5 - WaterMaster
        6 - ProcessMaster
    Y - Tier of Electronics
        1 - Standard Electronics
        2 - Enhanced Electronic
        3 - Advanced Electronics
        5 - Premium Electronics
    Z - Type of mounting
        1 - Integral with transmitter
        2 - Remote with transmitter (Sensor + Transmitter)
        8 - Sensor only
    Type of bore and liner:
    F - FEF/Full bore/Rubber liner
[3] For all meters:
        X - Type of electronics
            4 - AquaMaster
            5 - WaterMaster
        Y - Tier of Electronics
            1 - Standard Electronics
            2 - Enhanced Electronics
            3 - Advanced Electronics
            5 - Premium Electronics
        Z - Type of mounting
              1 - Integral with transmitter			
            2 - Remote with transmitter (Sensor + Transmitter)			
            8 – Sensor Only			
    
    Type of bore and liner:
    V – FEV/Optimized bore/PP liner
[4] For all meters:
        X - Type of electronics
            4 - AquaMaster
            5 - WaterMaster
        Y - Tier of Electronics
            1 - Standard Electronics
            2 - Enhanced Electronics
            3 - Advanced Electronics
            5 - Premium Electronics
        Z - Type of mounting
            1 - Integral with transmitter
            2 - Remote with transmitter (Sensor + Transmitter)
            8 – Sensor Only
    
        Type of bore and liner:
        F - FEF/Full bore/Rubber liner
        R - FER/Reduced bore/Rubber liner
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
      documentation shipped with the product are Certified.


 
ABB S.p.A. 
Via Luigi Vaccani, 4
22016 Ossuccio, Como 
Italy 
39 03 445 8111
Visit this company's website


Facility : Tremezzina (Loc. Ossuccio), Italy

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Transmitters/Gauges[G]
266DSH Differential Pressure Transmitter 142 x 142 x 210 mm C. HOT MLTPL

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
      documentation shipped with the product are Certified.


 
AccentPDIR 
2564 Industry Lane
Norristown, PA 19403 
United States 
610-630-7640


Facility : Ningbo, China

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Water Meters[G]
GLF-062/GLF-062-R 5/8" x 1/2" CLD 23 MLTPL
GLF-075/GLF-075-R 5/8" x 3/4" CLD 23 MLTPL
GLF-100/GLF-100-R 3/4" x 1" CLD 23 MLTPL
GLF-100F/GLF-100F-R 1" CLD 23 MLTPL
GLF-150/GLF-150-R 1 1/2" CLD 23 MLTPL
GLF-200(F)/GLF-200-R(F) 2" CLD 23 MLTPL
GLF-200/GLF-200-R 2" CLD 23 MLTPL

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



 
ACPP Custom Plumbing Parts, ULC 
10037-96 Avenue
Westlock, AB T7P-2P9 
Canada 
780-349-6511


Facility : Westlock, Alberta, Canada

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Manifolds
Copper Manifolds [1] C. HOT CU

[1] The following part numbers, configurations and sizes are Certified.  All manifolds are
    72" long (unless otherwise noted) and may be cut to the desired length.
    
    Copper Manifolds with Copper Ports:
    
    Pipe run 1", 1 1/4", 1 1/2" or 2" with 24 1/2", 3/4", or 1" copper outlets on 3" CTRS.
    
    CC1005024 1 X 1/2 CU
    CC1255024 1 1/4 X 1/2 CU
    CC1251024 1 1/4 X 1 CU
    CC1505024 1 1/2 X 1/2 CU
    CC1501024 1 1/2 X 1 CU
    CC2005024 2 X 1/2 CU
    CC1007524 1 X 3/4 CU
    CC1257524 1 1/4 X 3/4 CU
    CC1507524 1 1/2 X 3/4 CU
    CC2007524 2 X 3/4 CU
    CC2001024 2 X 1 CU
    
    Pipe run 1", 1 1/4", 1 1/2" or 2" with 18 1/2", 3/4", or 1" copper outlets on 4" CTRS
    
    CC1005018 1 X 1/2 CU
    CC1255018 1 1/4 X 1/2 CU
    CC1505018 1 1/2 X 1/2 CU
    CC2005018 2 X 1/2 CU
    CC1007518 1 X 3/4 CU
    CC1257518 1 1/4 X 3/4 CU
    CC1507518 1 1/2 X 3/4 CU
    CC2007518 2 X 3/4 CU
    CC1251018 1 1/4 X 1 CU
    CC1501018 1 1/2 X 1 CU
    CC2001018 2 X 1 CU
    
    Pipe run 1", 1 1/4", 1 1/2" or 2" with 12 1/2", 3/4", or 1" copper outlets on 6" CTRS.
    
    CC1005012ER 1 X 1/2 CU
    CC1255012ER 1 1/4 X 1/2 CU
    CC1505012ER 1 1/2 X 1/2 CU
    CC2005012ER 2 X 1/2 CU
    CC1007512ER 1 X 3/4 CU
    CC1257512ER 1 1/4 X 3/4 CU
    CC1507512ER 1 1/2 X 3/4 CU
    CC2007512ER 2 X 3/4 CU
    CC1251012ER 1 1/4 X 1 CU
    CC1501012ER 1 1/2 X 1 CU
    CC2001012ER 2 X 1 CU
    
    Pipe run 62" long, 1" with 30 1/2" copper outlets on 2" CTRS.
    
    CC1005030 1 X 1/2 CU
    
    Compact Headers - Pipe run 1" with 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, or 12 1/2" copper
    outlets on 1 1/2" CTRS.
    
    CC1005002 1 X 1/2 CU
    CC1005003 1 X 1/2 CU
    CC1005004 1 X 1/2 CU
    CC1005005 1 X 1/2 CU
    CC1005006 1 X 1/2 CU
    CC1005007 1 X 1/2 CU
    CC1005008 1 X 1/2 CU
    CC1005009 1 X 1/2 CU
    CC1005010 1 X 1/2 CU
    CC1005011 1 X 1/2 CU
    CC1005012 1 X 1/2 CU
    
    Speedy Copper Headers - closed one end and reduced 3/4" female sweat the other end.
    
    SC1005002RC 1 X 1/2 CU
    SC1005003RC 1 X 1/2 CU
    SC1005004RC 1 X 1/2 CU
    SC1005005RC 1 X 1/2 CU
    SC1005006RC 1 X 1/2 CU
    SC1005007RC 1 X 1/2 CU
    SC1005008RC 1 X 1/2 CU
    SC1005009RC 1 X 1/2 CU
    SC1005010RC 1 X 1/2 CU
    SC1005011RC 1 X 1/2 CU
    SC1005012RC 1 X 1/2 CU
    
    Speedy Copper Headers - closed one end and 1" plain the other end.
    
    SC1005002PL 1 X 1/2 CU
    SC1005003PL 1 X 1/2 CU
    SC1005004PL 1 X 1/2 CU
    SC1005005PL 1 X 1/2 CU
    SC1005006PL 1 X 1/2 CU
    SC1005007PL 1 X 1/2 CU
    SC1005008PL 1 X 1/2 CU
    SC1005009PL 1 X 1/2 CU
    SC1005010PL 1 X 1/2 CU
    SC1005011PL 1 X 1/2 CU
    SC1005012PL 1 X 1/2 CU
    
    Copper Manifolds with PEX Valves:
    
    Type L Copper Manifold with a Lead Free PEX Valve
    1", 1 1/4", 1 1/2", and 2" Copper Headers with 1/2" Lead Free PEX Valves on 3" Center
    
    CX1005024V-LF 1" x 1/2" Copper outlets with a 1/2" Lead free PEX Valve
    CX1255024V-LF 1 1/4" x 1/2" Copper outlets with a 1/2" Lead free PEX Valve
    CX1505024V-LF 1 1/2" x 1/2" Copper outlets with a 1/2" Lead free PEX Valve
    CX2005024V-LF 2" x 1/2" Copper outlets with a 1/2" Lead free PEX Valve
    
    1" or 1 1/4" Copper Header with 2-12 1/2" Lead Free PEX Valves on 2" Centers
    CVP1005002-LF
    CVP1005003-LF
    CVP1005004-LF
    CVP1005005-LF
    CVP1005006-LF
    CVP1005007-LF
    CVP1005008-LF
    CVP1005009-LF
    CVP1005010-LF
    CVP1005011-LF
    CVP1005012-LF
    CVP1255002-LF
    CVP1255002-LF
    CVP1255003-LF
    CVP1255004-LF
    CVP1255005-LF
    CVP1255006-LF
    CVP1255007-LF
    CVP1255008-LF
    CVP1255009-LF
    CVP1255010-LF
    CVP1255011-LF
    CVP1255012-LF
    



 
ADW Electronics Sdn Bhd 
9, Jalan BS7/1C, Seksyen 7
Taman Perindustian, Bukit Serdang 
Seri Kembangan Selangor 43300 
Malaysia 
86 20 84802041


Facility : Selangor, Malaysia

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Water Meters[G]
FSM0001-001 20 mm CLD 23 MLTPL

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



 
Akkim Kimya San. Ve Tic. A.S 
Tasköprü Mevkii, 39
Yalova 
Turkey 
90 226 815 33 00


Facility : Yalova, Turkey

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Ultrafiltration Devices[1] [2]
AKUALYS APM 80T 25 x 221.5 +/- 0.2cm CLD 23 MLTPL
Akualys AGM 25 x 222.0 +/- 0.1cm CLD 23 MLTPL
Akualys APM 80 25 x 204.2 +/- 0.1cm CLD 23 MLTPL
Akualys APM 90T 25 x 221.6 +/- 0.2cm CLD 23 MLTPL
Akualys ASM 25 x 145.5 +/- 0.1cm CLD 23 MLTPL

[1] Certified for a minimum daily flow 40,000 liters (AKUALYS ASM), 80,000 (AKUALYS AGM),
    86,400 liters (AKUALYS APM 80T)and 90,000 liters (AKUALYS APM 80)and 97,200 liters
    (AKUALYS APM 90T).
[2] Membranes should be flushed with tap water before being placed into service at the
    following rates:
    AKUALYS ASM at 25 liters per minute for 240 minutes.
    AKUALYS AGM at 50 liters per minute for 240 minutes.
    AKUALYS APM at 57 liters per minute for 240 minutes.
    AKUALYS APM 80T at 60 liters per minute for 240 minutes.
    AKUALYS APM 90T at 68 liters per minute for 240 minutes.

NOTE; Only products bearing the NSF Mark on the product, product packaging, and/or
      documentation shipped with the product are Certified.


 
Akkim Kimya San. Ve Tic. A.S. 
Tasköprü Mevkii
39 Yalova 
Turkey 
90 226 815 3300
Visit this company's website


Facility : Yalova, Turkey

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Ultrafiltration Devices[1] [2]
AKUALYS APM 80T 25 x 221.5 +/- 0.2cm CLD 23 MLTPL
Akualys AGM 25 x 222.0 +/- 0.1cm CLD 23 MLTPL
Akualys APM 80 25 x 204.2 +/- 0.1cm CLD 23 MLTPL
Akualys APM 90T 25 x 221.6 +/- 0.2cm CLD 23 MLTPL
Akualys ASM 25 x 145.5 +/- 0.1cm CLD 23 MLTPL

[1] Certified for a minimum daily flow 40,000 liters (AKUALYS ASM), 80,000 (AKUALYS AGM),
    86,400 liters (AKUALYS APM 80T)and 90,000 liters (AKUALYS APM 80)and 97,200 liters
    (AKUALYS APM 90T).
[2] Membranes should be flushed with tap water before being placed into service at the
    following rates:
    AKUALYS ASM at 25 liters per minute for 240 minutes.
    AKUALYS AGM at 50 liters per minute for 240 minutes.
    AKUALYS APM at 57 liters per minute for 240 minutes.
    AKUALYS APM 80T at 60 liters per minute for 240 minutes.
    AKUALYS APM 90T at 68 liters per minute for 240 minutes.



 
Aleum USA 
2601 Walnut Ave.
Tustin, CA 92780 
United States 
714-520-0338


Facility : Shandong, China

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Fire Hydrants
Dry-Barrel Fire Hydrant/ALFH-250 100-150 mm D. HOT MLTPL



 
ALFIXED Inc. 
499 Bridgeton Pike
Mullica Hill, NJ 08062 
United States 
646-469-9489


Facility : Zhejiang, China

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Valves[G]
201-3-1 1/2" F1960 PEX X 3/8 OD COMPRESSION ANGLE VALVE 1/4" - 3/4" CLD 23 MLTPL
201-3-2 1/2" F1960 PEX X 3/8 OD COMPRESSION STRAIGHT VALVE 1/4" - 3/4" CLD 23 MLTPL
202-1-8 1" PRO PRESS x 1" PEX BRASS ADAPTER (LEAD FREE) 3/8" - 2" C. HOT MLTPL
202-2-2 1" PRO PRESS BRASS COUPLING (LEAD FREE) 3/8" - 2" C. HOT MLTPL
202-2-4 1" PRO PRESS x 1" FPT BRASS ADAPTER (LEAD FREE) 3/8" - 2" C. HOT MLTPL
202-3-2 3/4" PRO PRESS BRASS COUPLING (LEAD FREE) 3/8" - 2" C. HOT MLTPL
202-3-4 3/4" PRO PRESS x 3/4" FPT BRASS ADAPTER (LEAD FREE) 3/8" - 2" C. HOT MLTPL
202-3-5 3/4" PRO PRESS x 3/4" PEX BRASS ADAPTER (LEAD FREE) 3/8" - 2" C. HOT MLTPL
202-4-2 1/2" PRO PRESS BRASS COUPLING (LEAD FREE) 3/8" - 2" C. HOT MLTPL
202-4-4 1/2" PRO PRESS x 1/2" FPT BRASS ADAPTER (LEAD FREE) 3/8" - 2" C. HOT MLTPL
202-4-5 1/2" PRO PRESS x 1/2" PEX BRASS ADAPTER (LEAD FREE) 3/8" - 2" C. HOT MLTPL
202-5-1 1/2" PRESS PLUG (LEAD FREE) 3/8" - 2" C. HOT MLTPL
202-5-2 1/2" PRESS X 1/2" PRESS ELBOW (LEAD FREE) 3/8" - 2" C. HOT MLTPL
202-5-3 1/2" PRESS X 1/2" PRESS X 1/2" PRESS TEE (LEAD FREE) 3/8" - 2" C. HOT MLTPL
202-5-4 3/4" PRESS X 3/4" PRESS X 1/2" PRESS TEE (LEAD FREE) 3/8" - 2" C. HOT MLTPL
202-5-5 1/2" Press x 1/2" FPT with 3 Ear Elbow (Lead Free) 3/8" - 2" C. HOT MLTPL
202-6-1 3/4" PRESS PLUG (LEAD FREE) 3/8" - 2" C. HOT MLTPL
202-6-2 3/4" PRESS X 3/4" PRESS ELBOW (LEAD FREE) 3/8" - 2" C. HOT MLTPL
202-6-3 3/4" PRESS X 3/4" PRESS X 3/4" PRESS TEE (LEAD FREE) 3/8" - 2" C. HOT MLTPL
202-6-4 1" PRESS PLUG (LEAD FREE) 3/8" - 2" C. HOT MLTPL
202-6-5 1" PRESS X 1" PRESS ELBOW (LEAD FREE) 3/8" - 2" C. HOT MLTPL
202-6-6 1" PRESS X 1" PRESS X 1" PRESS TEE (LEAD FREE) 3/8" - 2" C. HOT MLTPL
29-1-1 1" F1960 PEX BALL VALVE 1/4" - 4" CLD 23 MLTPL
29-2-1 3/4" F1960 PEX BALL VALVE 1/4" - 4" CLD 23 MLTPL
29-3-1 1/2" F1960 PEX BALL VALVE 1/4" - 4" CLD 23 MLTPL
5-1-1 1/2" MIP/Copper Sweat X 3/4" GHT 1/4" Turn Faucet - Lead Free 1/4" - 4" CLD 23 MLTPL
5-1-2 1/2" FPT X 3/4" GHT 1/4 TURN HOSE BIBBS 1/4" - 4" CLD 23 MLTPL
5-1-3 3/4 FPT X 3/4 GHT 1/4 TURN HOSE BIBBS WITH NAIL FLANGE 1/4" - 4" CLD 23 MLTPL
5-1-4 1/2" MPT X 3/4 GHT 1/4 TURN HOSE BIBS WITH NAIL FLANGE 1/4" - 4" CLD 23 MLTPL
5-1-4 1/2" MPT X 3/4 GHT 1/4 TURN HOSE BIBS WITH NAIL FLANGE 1/4" - 4" CLD 23 MLTPL
5-2-1 3/4" MIP x 3/4" GHT Hose Bibb Lead Free 1/4" - 4" CLD 23 MLTPL
5-2-2 3/4" FPT x 3/4" GHT Hose Bibb Lead Free 1/4" - 4" CLD 23 MLTPL
5-2-4 1/2 FPT X 3/4 GHT 1/4 TURN HOSE BIBBS WITH NAIL FLANGE 1/4" - 4" CLD 23 MLTPL
5-3-2 1/2 PEX X 3/4" GHT 1/4 TURN HOSE BIBBS WITH FLANGE 1/4" - 4" CLD 23 MLTPL
5-4-1 1/2 F1960 X 3/4" GHT 1/4 TURN HOSE BIBBS 1/4" - 4" CLD 23 MLTPL
5-4-2 1/2 F1960 X 3/4" GHT 1/4 TURN HOSE BIBBS WITH FLANGE 1/4" - 4" CLD 23 MLTPL

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



 
AlKawther Industries Co, Ltd. 
Jeddah Industrial City , ST 33
P.O.Box 7771 
Jeddah, 21472 
Saudi Arabia 
00966(12)6360644
Visit this company's website


Facility : Jeddah, Saudi Arabia

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Microfiltration Devices[1]
Microfiltration Polypropylene (PP) Cartridge Filter- xx- Filtration Rating YY 10 in-70 in D. HOT MLTPL

[1] XX:Length
    10 = 10"
    20 = 20"
    30 = 30"
    40 = 40"
    50 = 50"
    60 = 60"
    70 = 70"
    
    YY: Pore Size
    1=1 m
    2=2 m
    3=3 m
    5=5 m
    7=7 m
    10=10 m
    15=15 m
    20=20 m
    25=25 m
    30=30 m
    40=40 m
    50=50 m
    
    10" models are certified for a minimum daily permeate generation of 1,000 liters for use
    in public water treatment facilities. 
    20" models are certified for a minimum daily permeate generation of 2,000 liters for use
    in public water treatment facilities. 
    30" models are certified for a minimum daily permeate generation of 3,000 liters for use
    in public water treatment facilities.
    40" models are certified for a minimum daily permeate generation of 4,000 liters for use
    in public water treatment facilities. 
    50" models are certified for a minimum daily permeate generation of 5,000 liters for use
    in public water treatment facilities. 
    60" models are certified for a minimum daily permeate generation of 6,000 liters for use
    in public water treatment facilities. 
    70" models are certified for a minimum daily permeate generation of 7,000 liters for use
    in public water treatment facilities.



 
Allchem Performance Products 
416 South Main Street
Corsicana, TX 75110 
United States 
903-872-9997


Facility : Corsicana, TX

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Chemical Feeders[1]
Horizon PCF-60 [2] CLD 23 MLTPL
Horizon PTF-100 [3] CLD 23 MLTPL
Horizon PTF-250 [3] CLD 23 MLTPL
Horizon PTF-60 [3] CLD 23 MLTPL

[1] Certification of this product has been performed to the health effects requirements of
    NSF/ANSI/CAN 61, which assesses the acceptability of potential extractants from the
    chemical feeder when used with the manufacturer's recommended use chemicals. Any
    modifications including the use of chemicals other than those recommended by the
    manufacturer and chemicals that are not compliant to NSF/ANSI/CAN 60 will void the NSF
    Certification for this feeder.
[2] Horizon PCF-60 is Certified for a maximum 0.2% calcium hypochlorite solution added to
    drinking water to effect a maximum use level (MUL) of 10 ppm total chlorine, with a
    minimum of 47,500 gallons of water treated per day.
[3] Horizon PTF-60, Horizon PTF-100, and Horizon PTF-250 are Certified for a maximum 0.11%
    trichloroisocyanurate solution added to drinking water to effect a maximum use level
    (MUL) of 10 ppm total chlorine, with a minimum of 18,000 gallons of water treated per
    day.



 
American AVK 
2155 Meridian Boulevard
Minden, NV 89423 
United States 
775-552-1400
Visit this company's website


Facility : Minden, NV

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Fire Hydrants [G]
AVK Series 24XX Wet Barrel Fire Hydrant - Ductile Iron[1] 6" CLD 23 MLTPL
AVK Series 24XX Wet Barrel Fire Hydrant - Stainless Steel[1] 6" CLD 23 MLTPL
Series 27XX Dry Barrel Fire Hydrants[2] 4" - 8" CLD 23 MLTPL
Series 67 Post Hydrant 2" - 4" CLD 23 MLTPL

[1] AVK Order Codes for XX:
    Ductile Iron Hydrants
    
    10 - 2 x Hose + 1 x Pumper outlets, flanged with 4" ANSI B16.42 Monitor Flange drilled 
         to ANSI B16.42 Class 150
    20 - 1 x Hose + 2 x Pumper outlets, flanged.
    23 - 1 x Hose + 2 x Pumper outlets, flanged with San Diego drilling
    30 - 1 x Hose + 1 x Pumper outlet, with 6" NPT thread, UL
    40 - 1 x Hose + 1 x Pumper outlet, flanged, UL
    60 - 1 x Hose + 1 x Pumper outlet, with 6" NPT thread, UL and FM
    70 - 1 x Hose + 1 x Pumper outlet, flanged, UL and FM
    72 - EBMUD Hydrant
    73 - 1 x Hose + 1 x Pumper outlet, flanged, UL and FM, San Diego drilling
    74 - 1 x Hose + 1 x Pumper outlet, flanged, UL (FM removed)
    75 - 1 x Hose + 1 x Pumper outlet, flanged, UL (FM removed, San Diego drilling)
    76 - EBMUD Hydrant with San Diego drilling
    87 - 2 x Threaded hose + 1 Threaded pumper outlet, UL and FM, San Diego Drilling
    90 - 2 x Hose + 1 x Pumper outlet, flanged, UL and FM
    91 - Three outlets (2 x 2 1/2" - 1 x 4”/4 1/2")
    92 - 2 x Treaded hose + 1 Threaded pumper outlet, UL and FM
    93 - 2 x Hose + 1 x Pumper outlet, flanged, UL and FM, San Diego drilling
    94 - 2 x Hose + 1 x Pumper outlet, flanged, UL (FM removed)
    95 - 2 x Hose + 1 x Pumper outlet, flanged, UL (FM removed, San Diego drilling)
    96 - 2 x Hose + 1 x Pumper outlet, UL and FM, ANSI B16.1 Class 125 drilling
    
    Stainless Steel Hydrants
    
    42 - Stainless steel 1 x Hose + 1 x pumper
    43 - Stainless steel 1 x Hose + 1 x pumper, flanged with San Diego drilling
    44 - Stainless steel 1 x Hose + 1 x pumper, flanged with 8 bolt drilling to 
         ANSI B16.1, class 125
    50 - 2 x Hose + 1 x Pumper outlet, flanged, UL and FM
    52 - Stainless steel 2 x Hose + 1 x pumper.
    53 - Stainless steel 2 x Hose + 1 x pumper, flanged with San Diego drilling
    54 - Stainless steel 2 x Hose + 1 x pumper, flanged with 8 bolt drilling to 
         ANSI B16.1, class 125
    
    Certified hydrants use NBR valve discs and o-rings.
    
    Acceptable order codes for interior coating are 00, 01, 03, 08, 13, 29 and 53.
[2] XX refers to non-wetted characteristics of the hydrant and may be any value.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

Valves [G]
AVK Series 25/21 NRS GroovexFLange Gate Valve[6] 2 1/2" - 10" CLD 23 MLTPL
AVK Series 25/26 OS&Y GroovexFLange Gate Valve[6] 2 1/2" - 10" CLD 23 MLTPL
AVK Series 25/41 NRS GroovexFLange Gate Valve[6] 2 1/2" - 10" CLD 23 MLTPL
AVK Series 25/46 OS&Y FlangexFlange Gate Valve[6] 2 1/2" - 10" CLD 23 MLTPL
FlowGuard II® 2488X Wet Barrel Hydrant Check Valve[4] 6" CLD 23 MLTPL
S816 Butterfly Valve; FL x FL 3" - 24" CLD 23 MLTPL
S816 Butterfly Valve; MJ x FL 6" - 24" CLD 23 MLTPL
S816 Butterfly Valve; MJ x MJ 4"- 24" CLD 23 MLTPL
S816 Butterfly Valve; Wafer 3" - 24" CLD 23 MLTPL

[3] Valves 27-160-9176(Y)(XX)-05:
    Y  - Bolting Material	
         1 - 316 bolting
         3 - 304 bolting
    XX - Description of non-wetted options
         29 – Sherwin-Williams Red Oxide. Int. and ext.
         34 – Sherwin-Williams Red Oxide. Holiday free Int. and no holiday free ext.
         35 – Sherwin-Williams Red Oxide. Holiday free Int. and holiday free ext.
         87 – Sherwin-Williams Red Oxide. Int. and Polyurethan ext.
         88 – Sherwin-Williams Red Oxide. Holiday free Int. and Polyurethan ext.
[4] Acceptable order codes for interior coating are 00, 01, 03, 08, 13, 29 and 53.
[5] Certified for resilient seat to epoxy coated ductile iron seat. Certified for valves
    with no external actuation, lever and spring actuation, and lever and weight actuation.
[6] Certified for use in distribution systems only.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



 
AMERICAN Flow Control 
1501 North 31st Avenue
Birmingham, AL 35207 
United States 
800-326-8051 
205-325-7856
Visit this company's website


Facility : Conway, AR

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Valves[1] [2] [3] [G]
American Flow Control Series 2500 Resilient Wedge Gate Valve (25YY) NRS 14" - 30" CLD 23 MLTPL
American Flow Control Series 2500 Resilient Wedge Gate Valve (25YY) OS&Y 14" - 24" CLD 23 MLTPL
American Flow Control Series 2500-1 Resilient Wedge Gate Valve (25XX-1) NRS 2" - 12" CLD 23 MLTPL
American Flow Control Series 2500-1 Resilient Wedge Gate Valve (25XX-1) OS&Y 2" - 12" CLD 23 MLTPL
American Flow Control Series 3500 Resilient Wedge Gate Valve NRS 4" - 12" CLD 23 MLTPL
American Flow Control Series 3500 Resilient Wedge Gate Valve OSY 4" - 12" CLD 23 MLTPL

[1] XX and YY refer to the size in inches.
[2] Certified for use in distribution systems only.
[3] 2500 series valves are certified with the following optional connection types:
    (A)   - ALPHA
    (AX)  - ALPHA XL
    (F)   - Flanged (ANSI Class 125)
    (F2)  - Flanged (ANSI Class 250 with raised face)
    (F3)  - Flanged (PN16 with raised face)
    (F4)  - Flanged (PN16 with flat face)
    (FB)  - Flanged (ANSI Class 250 with flat face)
    (FX)  - Flex Ring
    (MJ)  - Mechanical Joint
    (PO)  - Push-on
    (PVC) – PVC
    (RF)  - Flanged (ANSI Class 150 with raised face)
    (S)   - Threaded (NPT)
    (TM)  - Tapping flanged by mechanical joint
    (TYT) – Tyton
    
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



Facility : South St. Paul, MN

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Fire Hydrants[1] [G]
AMERICAN Waterous Pacer Fire Hydrant (Model W67-250) 5 1/4" CLD 23 MLTPL
AMERICAN Waterous Pacer Fire Hydrant (Model W67-350) 5 1/4" CLD 23 MLTPL
AMERICAN Waterous Pacer Fire Hydrant (Model WB67-250) 5 1/4" CLD 23 MLTPL
AMERICAN Waterous Pacer Fire Hydrant (Model WB67-350) 5 1/4" CLD 23 MLTPL
AMERICAN Waterous Trend Fire Hydrant (Model WB77-1) 4 3/4" CLD 23 MLTPL
Sequoia Wet Barrel Hydrant PH 6" CLD 23 MLTPL
Sequoia Wet Barrel Hydrant PPH/PHH 6" CLD 23 MLTPL

[1] Trend and Pacer models are certified with the following optional end connections:
     - 4 inch mechanical joint
     - 6 inch mechanical joint
     - 6 inch mechanical joint for Dallas, Texas
     - 6 inch Class B mechanical joint
     - 8 inch mechanical joint
     - 6 inch flanged
     - 6 inch flanged with 2 inch NPT pipe plugs
     - 6 inch Tyton 
     - 6 inch plain end
     - 6 inch PVC
     - 6 inch vertical entry
     - 6 inch vertical entry for Traverse City TVC5
     - 6 inch ALPHA
     - 6 inch ALPHA XL
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

Valves [G]
AMERICAN Flow Control Series CV 2203 3" CLD 23 MLTPL
AMERICAN Flow Control Series CV 2204 4" CLD 23 MLTPL
AMERICAN Flow Control Series CV 2206 6" CLD 23 MLTPL
AMERICAN Flow Control Series CV 2208 8" CLD 23 MLTPL
AMERICAN Flow Control Series CV 2210 10" CLD 23 MLTPL
AMERICAN Flow Control Series CV 2212 12" CLD 23 MLTPL
American Flow Control Series 2500 Resilient Wedge Gate Valve (25YY) NRS[2] [3] [4] 14" - 30" CLD 23 MLTPL
American Flow Control Series 2500 Resilient Wedge Gate Valve (25YY) OS&Y[2] [3] [4] 14" - 24" CLD 23 MLTPL
American Flow Control Series 2500-1 Resilient Wedge Gate Valve (25XX-1) NRS[2] [3] [4] 2" - 12" CLD 23 MLTPL
American Flow Control Series 2500-1 Resilient Wedge Gate Valve (25XX-1) OS&Y[2] [3] [4] 2" - 12" CLD 23 MLTPL
American Flow Control Series 3500 Resilient Wedge Gate Valve (35YY) NRS[2] [3] [4] 4" - 12" CLD 23 MLTPL
American Flow Control Series 3500 Resilient Wedge Gate Valve (35YY) OSY[2] [3] [4] 4" - 12" CLD 23 MLTPL

[2] XX and YY refers to the size in inches.
[3] Certified for use in distribution systems only.
[4] 2500 and 3500 series valves are certified with the following optional connection types:
    (A)   - ALPHA
    (AX)  - ALPHA XL
    (F)   - Flanged (ANSI Class 125)
    (F2)  - Flanged (ANSI Class 250 with raised face)
    (F3)  - Flanged (PN16 with raised face)
    (F4)  - Flanged (PN16 with flat face)
    (FB)  - Flanged (ANSI Class 250 with flat face)
    (FX)  - Flex Ring
    (MJ)  - Mechanical Joint
    (PO)  - Push-on
    (PVC) – PVC
    (RF)  - Flanged (ANSI Class 150 with raised face)
    (S)   - Threaded (NPT)
    (TM)  - Tapping flanged by mechanical joint
    (TYT) – Tyton
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



Facility : Beaumont, TX

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Fire Hydrants[1] [2] [G]
American-Darling B-62-B-5 Fire Hydrant 5.25" CLD 23 MLTPL
American-Darling B-62-B-BB-5 Fire Hydrant 5.25" CLD 23 MLTPL
American-Darling B-84-B-5 Fire Hydrant 5.25", 6" CLD 23 MLTPL
American-Darling B-84-B-BB-5 Fire Hydrant 6" CLD 23 MLTPL
American-Darling Mark 73-5 (MK73-5) Fire Hydrant 4.5" CLD 23 MLTPL

[1] Certification does not include any connection gaskets.
[2] All model hydrants are certified with the following optional connection types:
    - ALPHA
    - ALPHA XL
    - Flanged 
    - Flanged (ANSI Class 250 with raised face)
    - Flanged (ANSI Class 250 with flat face)
    - Mechanical Joint
    - Mechanical Joint Plain End
    - Push-on
    - Tyton
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

Valves [G]
American Flow Control Series 2100 Resilient Seat Swing Check Valve (21XX)[3] [4] [5] 3" - 16" CLD 23 MLTPL
American Flow Control Series 2500 Resilient Wedge Gate Valve (25YY) NRS[6] [7] 14" - 66" CLD 23 MLTPL
American Flow Control Series 2500 Resilient Wedge Gate Valve (25YY) OS&Y[6] [7] 14" - 24" CLD 23 MLTPL
American Flow Control Series 2500-1 Resilient Wedge Gate Valve (25XX-1) NRS[6] [7] 4" - 12" CLD 23 MLTPL
American Flow Control Series 3500 Resilient Wedge Gate Valve (35YY) NRS[6] [7] 4" - 12" CLD 23 MLTPL

[3] XX refers to the size of the valve in inches and may be 03, 04, 06, 08, 10, 12, 14, or
    16.
[4] Certified for use in distribution systems only.
[5] 2100 series check valves are certified with the following optional connection types:
    - Flanged 
    - Mechanical Joint
    - Mechanical Joint Plain End
[6] XX and YY refer to the size in inches.
[7] 2500 and 3500 series valves are certified with the following optional connection types:
    (A)	  - ALPHA
    (AX)  - ALPHA XL
    (F)   - Flanged (ANSI Class 125)
    (F2)  - Flanged (ANSI Class 250 with raised face)
    (F3)  - Flanged (PN16 with raised face)
    (F4)  - Flanged (PN16 with flat face)
    (FB)  - Flanged (ANSI Class 250 with flat face)
    (FX)  - Flex Ring
    (MJ)  - Mechanical Joint
    (PO)  - Push-on
    (PVC) – PVC
    (RF)  - Flanged (ANSI Class 150 with raised face)
    (S)   - Threaded (NPT)
    (TM)  - Tapping flanged by mechanical joint
    (TYT) – Tyton
[8] The Swing Check Valve - Series 52 SC may use a "lever and weight" or "lever and spring"
    option.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



 
AMERICAN Flow Control 
1501 31st Avenue North
Birmingham, AL 35207 
United States 
800-326-8051 
205-325-7856
Visit this company's website


Facility : # 1 USA

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Switches/Sensors[G]
AFC-20-1025 5" x 3.5" CLD 23 MLTPL

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



 
American Water Chemicals, Inc. 
1802 Corporate Center Lane
Plant City, FL 33563 
United States 
813-246-5448


Facility : S

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Microfiltration Devices
Aquacare String Wound Filter Cartridge (1)(2)(3)(4)(5)(6)(7)S[1] [2] [3] C. HOT MLTPL

[1] Type test only, no factory production control audits conducted pursuant to Section 1.2
    of ISO Guide 65.
[2] (1) Filter
        I   - Industrial
    (2) Nominal particle removal rating (microns)
        005 - 0.5 micron
        010 - 1 micron
        050 - 5 micron
        100 - 10 micron
        200 - 20 micron
        250 - 25 micron
        500 - 50 micron
    (3) Media
        P   - Polypropylene
    (4) Cartridge length
        100 - 10.0"
        296 - 29 5/8"
        300 - 30"
        400 - 40"
    (5) Nominal diameter 
        S   - Standard (1.1" x 2.5")
        E   - Economy (1.1" x 2 3/8")
        L   - Large (1.1" x 3.0")
        X   - Special order
    (6) Core material
        1   - Polypropylene
        4   - 304 Stainless steel
        5   - 316 Stainless steel
    (8) Core type
        SD  - Standard
        XD  - Double o-ring
        XC  - Extended
        XX  - Special order
[3] Only cartridges 10" and longer have been reviewed and evaluated for Standard 61.  This
    product has not been reviewed or evaluated for point-of-use or point-of-entry
    applications.



 
Ames Fire & Waterworks, a Watts Regulator Co. 
1485 Tanforan Avenue
Woodland, CA 95776 
United States 
530-666-2493


Facility : Woodland, CA

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Backflow Preventers [G]
2000SS [x][3] 2 1/2" - 12" CLD 23 MLTPL
4000SS [x][3] 2 1/2" - 10" CLD 23 MLTPL
C200-X-YY-ZZ-TT[1] 2 1/2" - 10" CLD 23 MLTPL
C200a-X-YY-ZZ-TT[1] 2 1/2" - 10" CLD 23 MLTPL
C400-X-YY-ZZ-TT[1] 2 1/2" - 10" CLD 23 MLTPL
C400a-X-YY-ZZ-TT[1] 2 1/2" - 10" CLD 23 MLTPL
Colt [LFC300 – X]-YY-ZZ-WW-TT[4] 2 1/2" - 10" CLD 23 MLTPL
Colt [LFC500 – X]-YY-ZZ-WW-TT[4] 2 1/2" - 10" CLD 23 MLTPL
LF3000SS [x][3] 2 1/2" - 12" CLD 23 MLTPL
LF5000SS [x][3] 2 1/2" - 6" CLD 23 MLTPL
M200-X-YY-ZZ-TT[1] 2 1/2" - 10" CLD 23 MLTPL
M200a-X-YY-ZZ-TT[1] 2 1/2" - 10" CLD 23 MLTPL
M400-X-YY-ZZ-TT[1] 2 1/2" - 10" CLD 23 MLTPL
M400a-X-YY-ZZ-TT[1] 2 1/2" - 10" CLD 23 MLTPL
Maxim [LFM300 – X]-YY-ZZ-WW-TT[4] 2 1/2" - 10" CLD 23 MLTPL
Maxim [LFM500 – X]-YY-ZZ-WW-TT[4] 2 1/2" - 10" CLD 23 MLTPL

[1] X - Valve pattern
        Blank - Straight
        N - N pattern
        Z - Z pattern
    YY - Backflow shutoff designation where 2 per units may be mixed like NRS x PIV 
         BFG  - Butterfly valve
         DNRS - Domestic non-rising stem gate
         DOSY - Domestic outside stem and yoke gate
         DPIV - Domestic post indicator gate
         NRS  - Non-rising stem gate
         OSY  - Outside stem and yoke gate
         PIV  - Post indicator gate
         QT   - Quarter turn ball valve
    ZZ - Inlet and outlet connections
         Blank - Flange by flange
         FxG - Flange by groove 
         GxF - Groove by flange
         GxG - Groove by groove
    TT - Strainer options
         Blank - No strainer
         S - 77F-DI-FDA-125 strainer
         S - SS Stainless Strainer 8000F
[3] [X] Indicates possible suffixes:		
    DNRS - Domestic Non-Rising Stem Gate		
    DOSY - Domestic Observable Stem and Yoke Gate		
    NRS - Non-Rising Stem Gate		
    OSY - Observable stem and yoke gate		
    CFM is the output of the water meter in cubic feet per minute		
    GPM is the output of the water meter in gallons per minute		
    GPM is the output of the water meter in gallons per minute		
    UG - Ungated, gates ship separately		
    LG - Less Gate		
    LF - Lead Free		
    FS - Flood Sensor		
    TS - Tamper Switch		
    SR - Red Silicone
[4] X refers to the Valve Pattern				
    Blank: Straight				
    N: N pattern				
    Z: Z pattern				
    				
    YY refers to Backflow Shutoff Designation where 2 per units may be mixed like NRS x
    PIV:				
    DNRS - Domestic Non-Rising Stem Gate				
    DOSY - Domestic Observable Stem and Yoke Gate				
    NRS - Non-Rising Stem Gate				
    OSY - Observable stem and yoke gate				
    PIV: Post Indicator Gate				
    DPIV: Domestic Post Indicator Gate				
    BFG: Butterfly Valve				
    QT: Quarter Turn Ball Valve				
    				
    ZZ refers to Inlet and Outlet Connections:				
    Blank: Flange by Flange				
    FxG: Flange by Groove				
    GxF: Groove by Flange				
    GxG: Groove by Groove				
    				
    WW refers to the By-Pass Meter Option:				
    LM: Less Meter				
    C: Cubic Feet per Minute				
    G: Gallons Per Minute				
    				
    TT Strainer Options				
    Blank No Stainer				
    S Strainer 77F-DI-FDA-125				
    S-SS Stainless Strainer 8000F
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



 
Ames Fire & Waterworks, a Watts Regulators Co. Division 
1485 Tanforan Avenue
Woodland, CA 95776 
United States 
530-666-2493


Facility : # 1 China

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Strainer[1] [G]
LFAK 1/2" - 2" CLD 23 MLTPL

[1] Products have a marking exemption which allow product NSF-61 Marking and labels bearing
    the <= 0.25%.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



Facility : # 4 Zhejiang, China

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Valves[1] [G]
LFAFBV 1/2" - 2" CLD 23 MLTPL
LFAFBV-TC 1/2" - 2" CLD 23 MLTPL
LFAFBV-TC-TH 1/4" - 2" CLD 23 MLTPL
LFAFBV-TH 1/4" - 2" CLD 23 MLTPL
LFTC 1/2" - 3/4" CLD 23 MLTPL

[1] Products have a marking exemption which allow product NSF-61 Marking and labels bearing
    the <= 0.25%.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



Facility : Franklin, NH

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Backflow Preventers [G]
LF2000B-YY-ZZ[2] 1/2" CLD 23 MLTPL
LF2000BM1-YY-ZZ[1] 1" - 2" CLD 23 MLTPL
LF2000BM2-YY-ZZ[1] 1 1/4" - 1 1/2" CLD 23 MLTPL
LF2000BM3-YY-ZZ[1] 3/4" CLD 23 MLTPL
LF200B[2] 1/2" - 2" CLD 23 MLTPL
LF4000B-YY-ZZ[1] 1/2" CLD 23 MLTPL
LF4000BM2-YY-ZZ[1] 1" - 2" CLD 23 MLTPL
LF4000BM3-YY-ZZ[1] 3/4" CLD 23 MLTPL
LF400B[2] 1/2" - 2" CLD 23 MLTPL
LFU2000B-YY-ZZ[1] 1/2" CLD 23 MLTPL
LFU2000BM1-YY-ZZ[1] 1" - 2" CLD 23 MLTPL
LFU2000BM2-YY-ZZ[1] 3/4" - 1 1/2" CLD 23 MLTPL
LFU4000B-YY-ZZ[1] 1/2" CLD 23 MLTPL
LFU4000BM2-YY-ZZ[1] 3/4" - 2" CLD 23 MLTPL

[1] YY			
    LBV   - Supplied without shut-off valves		
    Blank - Supplied with shut-off valves					
    ZZ - Any Combination of the following:		
         Blank - Standard unit		
         BC - Brass Cap		
         CT (or C&T) - Cap and teather
         FP - Gear Operated Ball Valve		
         LH - Locking Handles		
         S  - Strainer (LF777SI)		
         SH - Stainless handles		
         Z3 - Stainless handles and nuts		
         Z4 - Non-removable handles		
         Z5 - Special dipped test cock adapter
[2] Products may include one or more of the following prefixes or suffixes:
    S              - Lead Free Strainer
    LF (as prefix) - Lead free
    LF (as suffix) - Less fitting
    QT             - Quarter turn ball valve
    Options for non-wetted:
    C & T - Cap and tether test cock covers
    LH    - Locking handled ball valves
    SH    - Stainless handled ball valves
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



 
AMETEK, Inc. 
1100 Cassatt Road
Berwyn, PA 19312 
United States 
610-647-2121
Visit this company's website


Facility : Horsham, PA

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Switches/Sensors[1] [2] [G]
575ABCDEFGH 1 1/4" x 7" CLD 23 MLTPL

[1] Naming Convention:
    575-A-B-C-D-E-F-G
    A - Sensing Port 
         S - Nylon
         M - 316SS
    B - Input/Output (all) 
          B - (12-40VDC / 4-20mA)
    C - Pressure Ranges (all listed) [0006 (0-6psi, up to 13.8ft water) to 0300 (0-300psi,
    up to 690ft water)]
    D - Electrical Connection 
          N - Polyurethane with nut
          R - Polyurethane with nut and support bracket
          C - Polyurethane with conduit adapter
    E - Diaphragm Material 
          L - 316SS
    F - Fill Fluid 
         M - Mineral Oil
    G -  X459
    H - Cable Length [005 to 700 (range of feet of cable, custom)]
[2] Certified for use in tanks 5 gallons and greater.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



 
Amiad Water Systems Ltd. 
D.N. Galil Elyon 1
12335 
Israel 
972 4 690 9500
Visit this company's website


Facility : Bet Zera, Jordan Valley, Israel

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Filtration Devices/Components
2" SPIN KLIN™ DW filter[1] [2] [3] [G] [4] CLD 23 MLTPL
3" SPIN KLIN™ DW Filter[1] [2] [3] [G] [4] CLD 23 MLTPL
4" GALAXY PP SPIN-KLIN™ DW filter[1] [2] [3] [G] [4] CLD 23 MLTPL
10" SUPER GALAXY PP SPIN KLIN™ DW Filter[1] [2] [3] [G] [4] CLD 23 MLTPL
10" SUPER GALAXY PP SPIN KLIN™ DW FILTER MODULE[G] [6] CLD 23 MLTPL

[1] The filtration level (micron) and color which are used in each SK filter and may be any
    of the following:
    10  - Light Blue
    20  – Grey
    40  - Purple
    55  – Green
    70  – Brown
    100 – Black
    130 – Red
    200 – Yellow
    400 – Blue
[2] The spring type may be any of the following alphabetic codes:
    HALAR    – HALAR Coating
    HSL      - Hastelloy
    LC       - Low Cost Energy
    LC-HALAR – Low-Cost Energy – HALAR Coating
    LCHSL    - Hastelloy-Low Cost Energy
    Regular (not indicated on product name)
[3] Inlet / outlet type may be any of the following:
    ARF - Flange
    Int - Integral
    Thr - Threaded
    Vic - Victaulic
[4] Certified for a minimum flow of 72,000 L/day.
[6] Certified for a minimum flow of 1,150,200 L/day.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

Manifolds
Manifold DW (1-4 ports)[5] [G] 110mm - 315mm CLD 23 PP

[5] Certified for a maximum of 4 ports.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



 
Amiad Water Systems Ltd. 
D.N. Galil Elyon 1
12335 
Israel 
800-243-4583 
704-662-3133
Visit this company's website


Facility : Israel

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Filtration Devices/Components [G]
AMF-S 370 DW[1] 87.1 x 247.5 cm CLD 23 MLTPL
EBS 10000 DW[2] [3] 8" - 14" CLD 23 MLTPL
EBS 15000 DW[2] [3] [11] 12" - 20" CLD 23 MLTPL
OMEGA 54K (10-500mic)[4] [5] 16" - 20" CLD 23 MLTPL
Omega I - 13.5K DW[4] [5] 8" - 12" CLD 23 MLTPL
Omega IE - 18K DW[4] [5] 8" - 12" CLD 23 MLTPL
Omega II - 27K DW[4] [5] 10" - 14" CLD 23 MLTPL
Omega IIE - 36K DW[4] [5] 10" - 20" CLD 23 MLTPL
SAF -X 1500 DW[2] [4] 2" - 4" CLD 23 MLTPL
SAF -X 3000 DW[2] [4] 3" - 6" CLD 23 MLTPL
SAF -X 4500 DW[2] [4] 4" - 8" CLD 23 MLTPL
SAF 6000 DW[2] [3] 6" - 10" CLD 23 MLTPL
SAF 1500 DW[2] [3] 2" - 4" CLD 23 MLTPL
SAF 3000 DW[2] [3] 3" - 6" CLD 23 MLTPL
SAF 4500 DW[2] [3] 4" - 8" CLD 23 MLTPL

[1] Product is certified for a minimum daily flow of 2,400,000 liters.
[2] These products have filtration levels of 10-800 microns.
[3] Certified for a minimum daily flow of 300,000 liters.
[4] Certified products are evaluated as POE systems.
[5] These products have filtration levels of 10-500 microns.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.
[11] Models EBS 10000 DW and EBS 15000 DW are certified for configurations O/L and I/L.

Microfiltration Devices [G]
AMF-36K DW[6] [7] [8] 2" CLD 23 MLTPL
AMF-370K DW[7] [8] [9] 6", 8" CLD 23 MLTPL
AMF-93K DW[7] [8] [10] 4" CLD 23 MLTPL

[6] Certified for a minimum daily flow of 144,000 liters.
[7] Certified for use in municipal water treatment plants only.
[8] Certified for 1-20 micron filters. Size is inlet/outlet diameter.
[9] Certified for a minimum daily flow of 900,000 liters.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.
[10] Certified for a minimum daily flow of 346,000 liters.



 
AMO ECO SYSTEMS Co.,Ltd. 
17-8, 4-sandan 7-ro, Jiksan-eup
Seobuk-gu, Cheonan-si 
Chungcheongnam-do 31040 
Republic of Korea 
82 31 981 0086
Visit this company's website


Facility : Cheonan-si, Chungcheongnam-Do, Korea, Republic of

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Ultrafiltration Devices[1] [G]
ASM-006 19.67 cm x 26.64 cm CLD 23 MLTPL
ASM-050 54.7 cm x 54.7 cm CLD 23 MLTPL
ASM-080 46.7 cm x 98.4 cm CLD 23 MLTPL
ASM-140 49.4 cm x 159.5 cm CLD 23 MLTPL

[1] Product requires a 12 hours flush at a flow rate of 10 liters per minute per square
    meter with pure water (RO production water).
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



 
Amtrol, Inc. 
1400 Division Road
West Warwick, RI 02893-1008 
United States 
800-736-1149 
401-884-6300


Facility : West Warwick, RI

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Pressurized Water Storage Tanks[1]
WF-14[5] 14 gal. CLD 23 MLTPL
PF-20 20 gal. CLD 23 MLTPL
SF-20 20 gal. CLD 23 MLTPL
WF-20[5] 20 gal. CLD 23 MLTPL
PF26 26 gal. CLD 23 MLTPL
WF-26[5] 26 gal. CLD 23 MLTPL
PF-32 32 gal. CLD 23 MLTPL
SF-32 32 gal. CLD 23 MLTPL
WF-32[5] 32 gal. CLD 23 MLTPL
PF-20 34 gal. CLD 23 MLTPL
PF-34 34 gal. CLD 23 MLTPL
SF-34 34 gal. CLD 23 MLTPL
WF-34[5] 34 gal. CLD 23 MLTPL
PF-44 44 gal. CLD 23 MLTPL
SF-44 44 gal. CLD 23 MLTPL
WF-44[5] 44 gal. CLD 23 MLTPL
PF-62 62 gal. CLD 23 MLTPL
SF-62 62 gal. CLD 23 MLTPL
WF-62 62 gal. CLD 23 MLTPL
PF-81 81 gal. CLD 23 MLTPL
WF-81 81 gal. CLD 23 MLTPL
PF-86 86 gal. CLD 23 MLTPL
SF-86 86 gal. CLD 23 MLTPL
WF-86[5] 86 gal. CLD 23 MLTPL
SF-119 119 gal. CLD 23 MLTPL
WF-119[5] 119 gal. CLD 23 MLTPL

[1] Certified Pressurized Water Storage Tanks may be sold with a union which is designated
    by the inclusion of a "U" in the model number.
[2] Optional suffixes UG or TK
[3] Optional suffixes OC, HG, TK, H or HTC
[4] Optional suffixes PS, UG, TK, or OC
[5] Optional suffix WT
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

Thermal Expansion Tanks
PFT-5 2 gal. D. HOT MLTPL
PFXT5 2 gal. D. HOT MLTPL
PFT-5XL 3.2 gal. D. HOT MLTPL
PFT-8 3.2 gal. D. HOT MLTPL
PFT-12 4.4 gal. D. HOT MLTPL
PFXT12 4.4 gal. D. HOT MLTPL



 
Anderson Metals, LLC, a subsidiary of Midland Industries 
1701 Southern Road
P.O. Box 34200 
Kansas City, MO 64120 
United States 
816-471-2600


Facility : #9902

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Valves[1] [G]
7X9101-[XXYY] Lead Free Yellow Brass Compression x Male Pipe Straight [2] D. HOT MLTPL
7X9103-[XXYY] Lead Free Yellow Brass Compression x Male Pipe Elbow [2] D. HOT MLTPL
7X9104-[XXYY] Lead Free Yellow Brass Flare x Male Pipe Straight [2] D. HOT MLTPL
7X9108-[XX] Lead Free Yellow Brass Male Pipe x Male Pipe Straight [2] D. HOT MLTPL
7X9110-[XX] Lead Free Yellow Brass Flare x Flare Straight [2] D. HOT MLTPL
7X9134-[XX] Lead Free Yellow Brass Female Pipe x Female Pipe Straight [2] D. HOT MLTPL
7X9135-[XX] Lead Free Yellow Brass Male Pipe x Female Pipe Straight [2] D. HOT MLTPL

[1] Fitting packaging is coded by the following convention:
    X indicates packaging:
    0 - Bulk pack
    1 - Blister pack
    3 - Single bag
    5 - Flag tagged
[2] Fitting sizes are coded by the following convention:
    XX, YY, and ZZ indicate size:
    02 - 1/8"
    03 - 3/16"
    04 - 1/4"
    05 - 5/16"
    06 - 3/8"
    08 - 1/2"
    10 - 5/8"
    12 - 3/4"
    14 - 7/8"
    16 - 1"
    24 - 1.5"
    32 - 2"
    40 - 2.5"
    48 - 3"
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



 
Anhui Meilong Rubber and Plastic Technology Co., Ltd. 
No. 23 Pierberg Avenue, East District
Guangde Economic Development Zone 
Xinhang Town, Guangde City, Anhui 
China 
86 513 6683 0986


Facility : Anhui, China

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Gasket/Sealing Materials [G] [LL]
ML F39 Seat [1] CLD 23 EPDM

[1] Certified for use in valves 1" - 120".
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.
[LL] Product conforms with lead content requirements for “lead free” plumbing as defined by
     California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water
     Act.



 
AQFILM Membrane Materials (Jiaxing) Co., Ltd. 
No.59, Quhe Road
Jiaxing Port District 
Jiaxing, 33 314000  
China 
400 700 7855 
86 573 8558 9691
Visit this company's website


Facility : Zhejiang, China

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Nanofiltration Devices
AFN-N8050D[1] [2] 22.5 x 163.8 cm CLD 23 MLTPL

[1] Trade Name AFN-N8050D requires a pre-service flush at 4 gallons per minute (gpm) for 48
    hours with deionized or other purified water.
[2] Trade name AFN-N8050D is certified for a minimum daily permeate generation of 57,600
    liters for use in public water treatment facilities.

Ultrafiltration Devices
AFD-N1080[3] [4] 25 x 222.8 cm CLD 23 MLTPL

[3] Trade Name AFD-N1080 requires a pre-service flush at 6 gallons per minute (gpm) for 48
    hours with deionized or other purified water.
[4] Trade name AFD-N1080 is certified for a minimum daily permeate generation of 76,800
    liters for use in public water treatment facilities.



 
Aqua Revival, LLC 
P.O. Box 796
Williams Bay, WI 53191 
United States 
262-725-6081
Visit this company's website


Facility : Delavan, WI

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Filtration Devices/Components [G]
BSG 20[1] 20" x 64" CLD 23 MLTPL
BSG 20T[1] 20" x 76" CLD 23 MLTPL
BSG 25[2] 25" x 66.8" CLD 23 MLTPL
BSG 25T[2] 25" x 78.8" CLD 23 MLTPL
BSG 30[3] 30" x 72" CLD 23 MLTPL
BSG 30T[3] 30" x 84" CLD 23 MLTPL
BSG 40[4] 40" x 75.5" CLD 23 MLTPL
BSG 40T[4] 40" x 87.5" CLD 23 MLTPL
BSG 50[5] 50" x 76" CLD 23 MLTPL
BSG 50T[5] 50" x 88" CLD 23 MLTPL
BSG 60[6] 60" x 78.5" CLD 23 MLTPL
BSG 60T[6] 60" x 90.5" CLD 23 MLTPL

[1] BSG 20 and BSG 20T are certified for a minimum flow of 72,000 gal./day.
[2] BSG 25 and BSG 25T are certified for a minimum flow of 122,400 gal./day.
[3] BSG 30 and BSG 30T are certified for a minimum flow of 182,880 gal./day.
[4] BSG 40 and BSG 40T are certified for a minimum flow of 338,400 gal.day.
[5] BSG 50 and BSG 50T are certified for a minimum flow of 537,120 gal./day.
[6] BSG 60 and BSG 60T are certified for a minimum flow of 802,080 gal.day.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



 
AquaBios International Ltd 
514 Stafford Drive North
Lethbridge, AB T1H 2B2 
Canada 
+1 403 328 0203


Facility : Coaldale, Alberta, Canada

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Filtration Devices/Components [G]
AquaBios RO-XXX Reverse Osmosis[1] [2] CLD 23 MLTPL

[1] XXX is used as a reference to the treatment capacity in liters per second.
[2] Certified for a minimum daily permeate generation of 10,500 L.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



 
Aqualin Technology Pty Ltd.  
U 77, 15 Cochranes Road
Moorabbin, 3185 
Australia 
61 491 095 691
Visit this company's website


Facility : #1 China

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Reverse Osmosis Element[1] [2] [3]
PURAN PN-FR-4040 4" x 40" CLD 23 MLTPL
PURAN PN-FR-8040 8" x 40" CLD 23 MLTPL
PURAN PN-FR-PRO-8040 8" x 40" CLD 23 MLTPL
PURAN PN-HLEFR-8040 8" x 40" CLD 23 MLTPL
PURAN PN-SWHF-8040 8" x 40" CLD 23 MLTPL

[1] Size is expressed as Diameter x length.
[2] PURAN PN-FR-4040 model is certified for a minimum daily flow of 2,000 gallons.
    PURAN ROCOD-325 model is certified for a minimum daily flow of 8,500 gallons.
    PURAN PN-HLEFR-8040 model is certified for a minimum daily flow of 10,500 gallons. 
    PURAN PN-BW-4021 model is certified for a minimum daily flow of 950 gallons.
    PURAN PN-BW-2540 model is certified for a minimum daily flow of 750 gallons.
    PURAN PN-BW-2521 model is certified for a minimum daily flow of 400 gallons.
    PURAN PN-SWHF-8040 model is certified for a minimum daily flow of 9000 gallons.
    PURAN PN-XLE-4040 models is certified for a minimum daily flow of 2,600 gallons.
    PURAN PN-BW-4040 models is certified for a minimum daily flow of 2,400 gallons.
    PURAN PN-LE-4040 model is certified for a minimum daily flow of 2,700 gallons.
    PURAN PN-LE-8040 model is certified for a minimum daily flow of 12,500 gallons.
    PURAN PN-XLE-8040 model is certified for a minimum daily flow of 11,000 gallons.
    PURAN PN-BW-8040 model is certified for a minimum daily flow of 10,000 gallons.
    PURAN PN-SW-4040 model is certified for a minimum daily flow of 1,500 gallons.
    PURAN PN-SW-8040 model is certified for a minimum daily flow of 6,500 gallons.
    PURAN PN-FR-8040 model is certified for a minimum daily flow of 11,500 gallons. 
    PURAN PN-FR-PRO-8040 model is Certified for a minimum daily flow of 10,500 gallons. 
[3] All models 2.5” in diameter require a 2 gpm flush for 24 hours using tap water.
    All models 4” in diameter require a 4 gpm flush for 24 hours using tap water.
    All models 8” in diameter require a 15 gpm flush for 24 hours using tap water.



 
Aquanomics Systems Limited 
B-2, 3rd Floor
Greater Kailash Enclave-II 
New Delhi 110048 
India 
91 11 41435945


Facility : Jiangsu Province, China

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Components, POE: Tanks, Water Softener
PRESSURE VESSEL >= 83.5 gal. CLD 23 MLTPL
PRESSURE VESSEL-H >= 83.5 gal. CLD 23 MLTPL



Aquaporin A/S 
Nymollevej 78
Kongens Lyngby 2800 
Denmark 
45 82 30 30 82 
Visit this company's website


Facility : # 2 Italy

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Reverse Osmosis Element [G]
Aquaporin Inside® CLEAR Plus FR 4040 [1] 4" x 40" CLD 23 MLTPL
Aquaporin Inside® CLEAR Plus FR 4040XL [1] 4" x 40" CLD 23 MLTPL
Aquaporin Inside® CLEAR Plus FR 8040[2] 8" x 40" CLD 23 MLTPL

[1] The 4040 models are flushed for 24 hours at a rate of 17 liters per minute with DI
    water.
    The 4040 models are Certified for a minimum daily flow of 2,271 liters per day.
[2] The 8040 models are flushed for 24 hours at a rate of 200 liters per minute with DI
    water.
    The 8040 models are Certified for a minimum daily flow of 12,617 liters per day.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



 
Aquaporin A/S 
Nymøllevej 78
Kongens Lyngby 
2800 
Denmark 
45 82 30 30 82
Visit this company's website


Facility : # 1 China

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Reverse Osmosis Element[1]
Aquaporin Inside® CLEAR Classic FR 4040 4" x 40" CLD 23 MLTPL
Aquaporin Inside® CLEAR Classic FR 4040XL 4" x 40" CLD 23 MLTPL
Aquaporin Inside® CLEAR Classic FR 8040-400 8" x 40" CLD 23 MLTPL
Aquaporin Inside® CLEAR Classic FR 8040-440 8" x 40" CLD 23 MLTPL
Aquaporin Inside® CLEAR Plus FR 4040 4" x 40" CLD 23 MLTPL
Aquaporin Inside® CLEAR Plus FR 4040XL 4" x 40" CLD 23 MLTPL
Aquaporin Inside® CLEAR Plus FR 8040-400 8" x 40" CLD 23 MLTPL
Aquaporin Inside® CLEAR Plus FR 8040-440 8" x 40" CLD 23 MLTPL

[1] Products require the following pre-service flush using tap water at a pressure not to
    exceed 50 psi:						
    Aquaporin Inside® CLEAR Ultra 4040,  Aquaporin Inside® CLEAR Ultra 4040XL require a
    pre-service flush at a flow rate of 4 GPM (gallons per minute) for 24 hours.
    Aquaporin Inside® CLEAR Ultra 8040-400,  Aquaporin Inside® CLEAR Ultra 8040-440 require
    a pre-service flush at a flow rate of 12 GPM (gallons per minute) for 24 hours.
    Aquaporin Inside® CLEAR Plus 4040,  Aquaporin Inside® CLEAR Plus 4040XL require a
    pre-service flush at a flow rate of 4 GPM (gallons per minute) for 24 hours.
    Aquaporin Inside® CLEAR Plus 8040-400,  Aquaporin Inside® CLEAR Plus 8040-440 require a
    pre-service flush at a flow rate of 12 GPM (gallons per minute) for 24 hours.
    Aquaporin Inside® CLEAR Plus FR 4040,  Aquaporin Inside® CLEAR Plus FR 4040XL require a
    pre-service flush at a flow rate of 4 GPM (gallons per minute) for 24 hours.
    Aquaporin Inside® CLEAR Plus FR 8040-400,  Aquaporin Inside® CLEAR Plus FR 8040-440
    require a pre-service flush at a flow rate of 12 GPM (gallons per minute) for 24 hours.
    Aquaporin Inside® CLEAR Classic 4040, Aquaporin Inside® CLEAR Classic 4040XL require a
    pre-service flush at a flow rate of 4 GPM (gallons per minute) for 24 hours.
    Aquaporin Inside® CLEAR Classic 8040-400,  Aquaporin Inside® CLEAR Classic 8040-440
    require a pre-service flush at a flow rate of 12 GPM (gallons per minute) for 24 hours.
    Aquaporin Inside® CLEAR Classic HR 4040,  Aquaporin Inside® CLEAR Classic HR 4040XL
    require a pre-service flush at a flow rate of 4 GPM (gallons per minute) for 24 hours.
    Aquaporin Inside® CLEAR Classic HR 8040-400, Aquaporin Inside® CLEAR Classic HR 8040-440
    require a pre-service flush at a flow rate of 12 GPM (gallons per minute) for 24 hours.
    Aquaporin Inside® CLEAR Classic FR 4040,  Aquaporin Inside® CLEAR Classic FR 4040XL
    require a pre-service flush at a flow rate of 4 GPM (gallons per minute) for 24 hours.
    Aquaporin Inside® CLEAR Classic FR 8040-400,  Aquaporin Inside® CLEAR Classic FR
    8040-440 require a pre-service flush at a flow rate of 12 GPM (gallons per minute) for
    24 hours.
    Aquaporin Inside® CLEAR Eco 4040, Aquaporin Inside® CLEAR Eco 4040XL require a
    pre-service flush at a flow rate of 4 GPM (gallons per minute) for 24 hours.
    Aquaporin Inside® CLEAR Eco 8040-400,  Aquaporin Inside® CLEAR Eco 8040-440 require a
    pre-service flush at a flow rate of 12 GPM (gallons per minute) for 24 hours.



 
AQUATROL c/o Hydronix Water Technology 
8630 Rochester Avenue
Rancho Cucamonga, CA 91730 
United States 
909 527 6996
Visit this company's website


Facility : # 2 C

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Components, POE: Tanks, Water Softener
AT-0618BK-25T >= 6.3 L CLD 23 MLTPL
AT-0618BL-25T >= 6.3 L CLD 23 MLTPL
AT-0618NA-25T >= 6.3 L CLD 23 MLTPL
AT-0713BK-25T >= 6.3 L CLD 23 MLTPL
AT-0713BL-25T >= 6.3 L CLD 23 MLTPL
AT-0713NA-25T >= 6.3 L CLD 23 MLTPL
AT-0717BK-25T >= 6.3 L CLD 23 MLTPL
AT-0717BL-25T >= 6.3 L CLD 23 MLTPL
AT-0717NA-25T >= 6.3 L CLD 23 MLTPL
AT-0735BK-25T >= 6.3 L CLD 23 MLTPL
AT-0735BL-25T >= 6.3 L CLD 23 MLTPL
AT-0735NA-25T >= 6.3 L CLD 23 MLTPL
AT-0744BK-25T >= 6.3 L CLD 23 MLTPL
AT-0744BL-25T >= 6.3 L CLD 23 MLTPL
AT-0744NA-25T >= 6.3 L CLD 23 MLTPL
AT-0813BK-25T >= 6.3 L CLD 23 MLTPL
AT-0813BL-25T >= 6.3 L CLD 23 MLTPL
AT-0813NA-25T >= 6.3 L CLD 23 MLTPL
AT-0817BK-25T >= 6.3 L CLD 23 MLTPL
AT-0817BL-25T >= 6.3 L CLD 23 MLTPL
AT-0817NA-25T >= 6.3 L CLD 23 MLTPL
AT-0835BK-25T >= 6.3 L CLD 23 MLTPL
AT-0835BL-25T >= 6.3 L CLD 23 MLTPL
AT-0835NA-25T >= 6.3 L CLD 23 MLTPL
AT-0844BK-25T >= 6.3 L CLD 23 MLTPL
AT-0844BL-25T >= 6.3 L CLD 23 MLTPL
AT-0844NA-25T >= 6.3 L CLD 23 MLTPL
AT-0917BK-25T >= 6.3 L CLD 23 MLTPL
AT-0917BL-25T >= 6.3 L CLD 23 MLTPL
AT-0917NA-25T >= 6.3 L CLD 23 MLTPL
AT-0935BK-25T >= 6.3 L CLD 23 MLTPL
AT-0935BL-25T >= 6.3 L CLD 23 MLTPL
AT-0935NA-25T >= 6.3 L CLD 23 MLTPL
AT-0948BK-25T >= 6.3 L CLD 23 MLTPL
AT-0948BL-25T >= 6.3 L CLD 23 MLTPL
AT-0948NA-25T >= 6.3 L CLD 23 MLTPL
AT-1017BK-25T >= 6.3 L CLD 23 MLTPL
AT-1017BL-25T >= 6.3 L CLD 23 MLTPL
AT-1017NA-25T >= 6.3 L CLD 23 MLTPL
AT-1035BK-25T >= 6.3 L CLD 23 MLTPL
AT-1035BL-25T >= 6.3 L CLD 23 MLTPL
AT-1035NA-25T >= 6.3 L CLD 23 MLTPL
AT-1044BK-25T >= 6.3 L CLD 23 MLTPL
AT-1044BL-25T >= 6.3 L CLD 23 MLTPL
AT-1044NA-25T >= 6.3 L CLD 23 MLTPL
AT-1054BK-25T >= 6.3 L CLD 23 MLTPL
AT-1054BL-25T >= 6.3 L CLD 23 MLTPL
AT-1054NA-25T >= 6.3 L CLD 23 MLTPL
AT-1217BK-25T >= 6.3 L CLD 23 MLTPL
AT-1217BL-25T >= 6.3 L CLD 23 MLTPL
AT-1217NA-25T >= 6.3 L CLD 23 MLTPL
AT-1248BK-25T >= 6.3 L CLD 23 MLTPL
AT-1248BL-25T >= 6.3 L CLD 23 MLTPL
AT-1248NA-25T >= 6.3 L CLD 23 MLTPL
AT-1252BK-25T >= 6.3 L CLD 23 MLTPL
AT-1252BL-25T >= 6.3 L CLD 23 MLTPL
AT-1252NA-25T >= 6.3 L CLD 23 MLTPL
AT-1265BK-25T >= 6.3 L CLD 23 MLTPL
AT-1265BL-25T >= 6.3 L CLD 23 MLTPL
AT-1265NA-25T >= 6.3 L CLD 23 MLTPL
AT-1344BK-25T >= 6.3 L CLD 23 MLTPL
AT-1344BL-25T >= 6.3 L CLD 23 MLTPL
AT-1344NA-25T >= 6.3 L CLD 23 MLTPL
AT-1354BK-25T >= 6.3 L CLD 23 MLTPL
AT-1354BL-25T >= 6.3 L CLD 23 MLTPL
AT-1354NA-25T >= 6.3 L CLD 23 MLTPL
AT-1465BK-25T >= 6.3 L CLD 23 MLTPL
AT-1465BK-4T >= 6.3 L CLD 23 MLTPL
AT-1465BL-25T >= 6.3 L CLD 23 MLTPL
AT-1465BL-4T >= 6.3 L CLD 23 MLTPL
AT-1465NA-25T >= 6.3 L CLD 23 MLTPL
AT-1465NA-4T >= 6.3 L CLD 23 MLTPL
AT-1665BK-25T >= 6.3 L CLD 23 MLTPL
AT-1665BK-4T >= 6.3 L CLD 23 MLTPL
AT-1665BK-4T4B >= 6.3 L CLD 23 MLTPL
AT-1665BL-25T >= 6.3 L CLD 23 MLTPL
AT-1665BL-4T >= 6.3 L CLD 23 MLTPL
AT-1665BL-4T4B >= 6.3 L CLD 23 MLTPL
AT-1665NA-25T >= 6.3 L CLD 23 MLTPL
AT-1665NA-4T >= 6.3 L CLD 23 MLTPL
AT-1665NA-4T4B >= 6.3 L CLD 23 MLTPL
AT-1865BK-4T >= 6.3 L CLD 23 MLTPL
AT-1865BK-4T4B >= 6.3 L CLD 23 MLTPL
AT-1865BL-4T >= 6.3 L CLD 23 MLTPL
AT-1865BL-4T4B >= 6.3 L CLD 23 MLTPL
AT-1865NA-4T >= 6.3 L CLD 23 MLTPL
AT-1865NA-4T4B >= 6.3 L CLD 23 MLTPL
AT-2162BK-4T >= 83.5 gal. CLD 23 MLTPL
AT-2162BK-4T4B >= 83.5 gal. CLD 23 MLTPL
AT-2162BL-4T >= 83.5 gal. CLD 23 MLTPL
AT-2162BL-4T4B >= 83.5 gal. CLD 23 MLTPL
AT-2162NA-4T >= 83.5 gal. CLD 23 MLTPL
AT-2162NA-4T4B >= 83.5 gal. CLD 23 MLTPL
AT-2472BK-4T >= 83.5 gal. CLD 23 MLTPL
AT-2472BK-4T4B >= 83.5 gal. CLD 23 MLTPL
AT-2472BL-4T >= 83.5 gal. CLD 23 MLTPL
AT-2472BL-4T4B >= 83.5 gal. CLD 23 MLTPL
AT-2472NA-4T >= 83.5 gal. CLD 23 MLTPL
AT-2472NA-4T4B >= 83.5 gal. CLD 23 MLTPL
AT-3072BK-4T >= 83.5 gal. CLD 23 MLTPL
AT-3072BK-4T4B >= 83.5 gal. CLD 23 MLTPL
AT-3072BL-4T >= 83.5 gal. CLD 23 MLTPL
AT-3072BL-4T4B >= 83.5 gal. CLD 23 MLTPL
AT-3072NA-4T >= 83.5 gal. CLD 23 MLTPL
AT-3072NA-4T4B >= 83.5 gal. CLD 23 MLTPL
AT-3672BK-4T >= 83.5 gal. CLD 23 MLTPL
AT-3672BK-4T4B >= 83.5 gal. CLD 23 MLTPL
AT-3672BK-6T6B >= 83.5 gal. CLD 23 MLTPL
AT-3672BL-4T >= 83.5 gal. CLD 23 MLTPL
AT-3672BL-4T4B >= 83.5 gal. CLD 23 MLTPL
AT-3672BL-6T6B >= 83.5 gal. CLD 23 MLTPL
AT-3672NA-4T >= 83.5 gal. CLD 23 MLTPL
AT-3672NA-4T4B >= 83.5 gal. CLD 23 MLTPL
AT-3672NA-6T6B >= 83.5 gal. CLD 23 MLTPL
AT-3694BK-6T6B >= 83.5 gal. CLD 23 MLTPL
AT-3694BL-6T6B >= 83.5 gal. CLD 23 MLTPL
AT-3694NA-6T6B >= 83.5 gal. CLD 23 MLTPL
AT-4272BK-6T6B >= 83.5 gal. CLD 23 MLTPL
AT-4272BL-6T6B >= 83.5 gal. CLD 23 MLTPL
AT-4272NA-6T6B >= 83.5 gal. CLD 23 MLTPL
AT-4872BK-6T6B >= 83.5 gal. CLD 23 MLTPL
AT-4872BL-6T6B >= 83.5 gal. CLD 23 MLTPL
AT-4872NA-6T6B >= 83.5 gal. CLD 23 MLTPL
AT-4894BK-6T6B >= 83.5 gal. CLD 23 MLTPL
AT-4894BL-6T6B >= 83.5 gal. CLD 23 MLTPL
AT-4894NA-6T6B >= 83.5 gal. CLD 23 MLTPL
AT-60110BK-6T6B >= 83.5 gal. CLD 23 MLTPL
AT-60110BL-6T6B >= 83.5 gal. CLD 23 MLTPL
AT-60110NA-6T6B >= 83.5 gal. CLD 23 MLTPL
AT-6094BK-6T6B >= 83.5 gal. CLD 23 MLTPL
AT-6094BL-6T6B >= 83.5 gal. CLD 23 MLTPL
AT-6094NA-6T6B >= 83.5 gal. CLD 23 MLTPL
AT-6370BK-6T6B >= 83.5 gal. CLD 23 MLTPL
AT-6370BL-6T6B >= 83.5 gal. CLD 23 MLTPL
AT-6370NA-6T6B >= 83.5 gal. CLD 23 MLTPL
AT-6383BK-6T6B >= 83.5 gal. CLD 23 MLTPL
AT-6383BL-6T6B >= 83.5 gal. CLD 23 MLTPL
AT-6383NA-6T6B >= 83.5 gal. CLD 23 MLTPL



 
AQUESTIA 
Kibbutz Kfar Charuv 12932
Israel 
972 6 676 1980
Visit this company's website


Facility : Kibbutz Kfar Charuv, Israel

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Backflow Preventers[G]
DC 500 1/2" - 2" CLD 23 MLTPL
DC 501 1/2" - 2" CLD 23 MLTPL
RP 500 1/2" - 2" CLD 23 MLTPL
RP 501 1/2" - 2" CLD 23 MLTPL

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

Valves [G]
D-060-C HF 1" - 10" CLD 23 MLTPL
D-062 HF 1" - 10" CLD 23 MLTPL

[1] Product trade name will have a suffix of NS or V: NS represents non-slam V represents
    one way out.
[2] DAV  - Dorot Control Valve
    P    - Plastic Body & Cover
    X    - Size
           05 - 1/2" / 12 mm
           75 - 3/4" / 20 mm
           1  - 1" / 25mm
           2  - 2" / 50 mm
    Y    - Function
           A  - Automatic
           K  - Kinetic
           KA - Kinetic Automatic Combination
    Z    - Connection Standard
           BSP - British Standard Pipe
           NPT - National Pipe Thread
    Note: 2" / 50 mm available with K or KA functions only
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



 
Arad Ltd. 
Kibbutz, Dalia 19239
Israel 
972 4 989 7911
Visit this company's website


Facility : Dalia, Israel

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Valves and Related Fittings
Adapter 2 BSP composite for polymer Octave 1 1/2 MM[1] 1 1/2" CLD 23 MLTPL
Couplings Set Polymer BSP 1 1/2[1] [G] 1 1/2" CLD 23 MLTPL
Couplings Set Polymer NPT 1 1/2[1] [G] 1 1/2" CLD 23 MLTPL
Couplings Set Polymer Swivel for NRV BSP 1 1/2[1] [G] 1 1/2" CLD 23 MLTPL
Couplings Set Polymer Swivel for NRV NPT 1 1/2[1] [G] 1 1/2" CLD 23 MLTPL
Couplings set polymer BSP 1[2] [G] 1" CLD 23 MLTPL
Couplings set polymer for NRV BSP 1[2] [G] 1" CLD 23 MLTPL

[1] This product is Certified for use with 1.5" Octave threaded polymer water meters only.
[2] Certified for use with 1" water meters.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



 
AROMEM Pte. Ltd. 
Building 888, Luzhi Evenue, Luzhi Town
Wuzhong District, Suzhou 
Jiangsu 215126 
China 
86 512 6270 0495


Facility : Zhejiang, China

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Reverse Osmosis Element[1] [3]
SURO BW-4040FR 4" x 40" CLD 23 MLTPL
SURO BW-8040FR 8" x 40" CLD 23 MLTPL
SURO NF30-4040 4" x 40" CLD 23 MLTPL
SURO NF30-8040 8" x 40" CLD 23 MLTPL
SURO NF90-4040 4" x 40" CLD 23 MLTPL
SURO NF90-8040 8" x 40" CLD 23 MLTPL
SURO SW-4040FR 4" x 40" CLD 23 MLTPL
SURO SW-8040FR 8" x 40" CLD 23 MLTPL

[1] Certified for the following minimum daily flow rates:
    SURO XLP-8040 is certified for a minimum flow of 9000 gallons per day.
    SURO XLP-4040 and SURO BW-4040FR are certified for a minimum flow of 2300 gallons per
    day.
    SURO ULP-8040 is certified for a minimum flow of 12000 gallons per day.
    SURO ULP-4040 is certified for a minimum flow of 2600 gallons per day.
    SURO ULP-8040HR and SURO BW-8040 are certified for a minimum flow of 10500 gallons per
    day.
    SURO ULP-4040HR is certified for a minimum flow of 2400 gallons per day.
    SURO BW-4040 is certified for a minimum flow of 2500 gallons per day.
    SURO BW-8040FR is certified for a minimum flow of 9500 gallons per day.
    SURO NF30-8040 is certified for a minimum flow of 14000 gallons per day.
    SURO NF30-4040 is certified for a minimum flow of 3200 gallons per day.
    SURO NF90-8040 is certified for a minimum flow of 14500 gallons per day.
    SURO NF90-4040 is certified for a minimum flow of 3500 gallons per day.
    SURO SW-8040 is certified for a minimum flow of 9500 gallons per day.
    SURO SW-4040 is certified for a minimum flow of 3200 gallons per day.
    SURO SW-8040FR is certified for a minimum flow of 7500 gallons per day.
    SURO SW-4040FR is certified for a minimum flow of 3200 gallons per day.
[3] Naming Convention:
    SURO      - The abbreviation of the company name
    ULP       - Ultra Low Pressure
    XLP       - Extremely Low Pressure
    FR        - Fouling Resistance and can be used to High Salt water
    BW        - Bitter water, which can be used for bitter water
    8040/4040 - Size



 
Asahi America Inc. / Asahi Yukizai Corporation 
655 Andover Street
Lawrence, MA 01843 
United States 
800-343-3618 
781-321-5409


Facility : Lawrence, MA

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Valves
Butterfly Valve Type 57IL (PVC/PP/EPDM) 3" - 12" CLD 23 MLTPL
Butterfly Valve Type 57P (PP/PP/EPDM)[1] 1 1/2" - 14" CLD 23 MLTPL
Butterfly Valve Type 57P (PVC/PP/EPDM)[1] 1 1/2" - 14" CLD 23 MLTPL
Diaphragm Valve (CPVC(LGY)/PTFE) 1/2"- 2" CLD 23 MLTPL
Diaphragm Valve (PVC/PTFE) 1/2"- 2" CLD 23 MLTPL
True Union Diaphragm Valve (CPVC(LGY)/PTFE/FKM-F) 1/2"- 2" CLD 23 MLTPL
True Union Diaphragm Valve (PVC/PTFE/FKM-F) 1/2"- 2" CLD 23 MLTPL

[1] Certified for metric equivalent sizes of 40 - 350 mm.

NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
      documentation shipped with the product are Certified.


Facility : Miyazaki-Pref, Japan

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Valves [G]
3-Way True Union Ball Valve Type 23 (Multiport) (PVC/FKM) 1/2" - 4" CLD 23 MLTPL
Ball Valve Type 21 (CPVC (LGY)/FKM) 2 1/2" - 4" CLD 23 MLTPL
Ball Valve Type 21 (PVC/FKM) 2 1/2" - 4" CLD 23 MLTPL
Ball Valve Type 21 Alpha (CPVC (LGY)/FKM) 1/2"- 2" CLD 23 MLTPL
Ball Valve Type 21 Alpha (PVC/FKM) 1/2" - 2" CLD 23 MLTPL
Butterfly Valve Type 57 (PP/PP/EPDM)[1] 1 1/2" - 14" CLD 23 MLTPL
Butterfly Valve Type 57 (PVC/PP/EPDM)[1] 1 1/2" - 14" CLD 23 MLTPL
Diaphragm Valve (CPVC(LGY)/PTFE) 1/2"- 4" CLD 23 MLTPL
Diaphragm Valve (PVC/PTFE) 1/2"- 4" CLD 23 MLTPL
Sediment Strainer Type-Y (PVC/FKM) 1/2" - 4" CLD 23 MLTPL
Single Union Ball Check Valve (CPVC (LGY)/FKM) 3", 4" CLD 23 MLTPL
Single Union Ball Check Valve (PVC/FKM) 3", 4" CLD 23 MLTPL
True Union Ball Check Valve (CPVC (LGY)/FKM) 1/2" - 2" CLD 23 MLTPL
True Union Ball Check Valve (PVC/FKM) 1/2" - 2" CLD 23 MLTPL
True Union Diaphragm Valve (CPVC(LGY)/PTFE/FKM-F) 1/2"- 2" CLD 23 MLTPL
True Union Diaphragm Valve (PVC/PTFE/FKM-F) 1/2"- 2" CLD 23 MLTPL

[1] Certification includes metric equivalent sizes of 40 - 350 mm.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
      documentation shipped with the product are Certified.


 
Asahi Kasei Corporation 
Hibiya Mitsui Tower, 1-1-2 Yurakucho
Chiyoda-ku 
Tokyo 100-0006 
Japan 
81 3 6699 3227
Visit this company's website


Facility : Hangzhou, Zhejiang, China

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Ultrafiltration Devices[1] [2] [3] [4] [G]
UHS-620A2 16.5 cm x 216 cm CLD 23 MLTPL
UNA-620A 16.5 cm x 216 cm CLD 23 MLTPL
UNA-620AB 16.5 cm x 216 cm CLD 23 MLTPL
UNA620A-ADA 16.5 cm x 216 cm CLD 23 MLTPL
UNA620A-DCA 21.6 cm x 230 cm CLD 23 MLTPL

[1] The UNA-620AB is certified for a minimum daily flow of 31,200 liters per day.
    The UNA-620A and UNA620A-ADA are certified for a minimum daily flow of 24,000 litters
    per day.
    UHS-620A2 is certified for a minimum daily flow of 12,000 liters per day.
[2] UNA620A-DCA is certified for a minimum daily flow of 47,520 liters per day.
[3] The UNA-620AB, UNA620A-ADA, UNA620A-DCA, UNA-620A and UHS-620A2 are flushed for 2 hours
    at a flow rate of 33.3 liters per minute with UF/MF filtered de-ionized water.
[4] Complies with US EPA Maximum Contaminant Levels (MCLs) for PFAS according to
    NSF/ANSI/CAN 61.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



Facility : Fuji, Sizuoka, Japan

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Ultrafiltration Devices[1] [2] [3] [G]
UNA-600A 16.5 cm x 106 cm CLD 23 MLTPL
UNA-620A 16.5 cm x 216 cm CLD 23 MLTPL
UNA-620AB 16.5 cm x 216 cm CLD 23 MLTPL
UNA-660A 16.5 cm x 176 cm CLD 23 MLTPL
UNA620A-ADA 16.5 cm x 216 cm CLD 23 MLTPL
UNA620AS 16.5 cm x 216 cm CLD 23 MLTPL

[1] The UNA-620AB is certified for a minimum daily flow of 31,200 liters per day. 
    The UNA-620A and UNA620A-ADA are certified for a minimum daily flow of 24,000 liters per
    day. 
    The UNA-660A is certified for a minimum daily flow of 19,200 liters per day.
    The UNA-600A is certified for a minimum daily flow of 1,040 liters per day.
[2] The UNA-620AB, UNA620A-ADA and UNA-620A are flushed for 2 hours at a flow rate of 33.3
    liters per minute with UF/MF filtered de-ionized water.
    The UNA-660A is flushed for 2 hours at a flow rate of 26.6 liters per minute with UF/MF
    filtered de-ionized water.
    The UNA-600A is flushed for 2 hours at a flow rate of 16.7 liters per minute with UF/MF
    filtered de-ionized water.
[3] Complies with US EPA Maximum Contaminant Levels (MCLs) for PFAS according to
    NSF/ANSI/CAN 61.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



 
Asahi Kasei Corporation 
Hibiya Mitsui Tower, 1-1-2 Yurakucho
Chiyoda-ku 
Tôkyô [Tokyo] 100-0006 
Japan 
81 3 6699 5934


Facility : Chungcheongbuk-Do, Korea, Republic of

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Reverse Osmosis Element[1] [2] [3] [G]
AK FR 400/34 8" x 40" CLD 23 MLTPL
AK FR 400/36 8" x 40" CLD 23 MLTPL

[1] End of Trade name may include customer and inventory management information with letters
    or numbers.
[2] All models should receive a pre-service flush to be conducted at a low rate of 2.628
    liters per minute for 1 hour using deionized water.
[3] Certified for a minimum daily flow of 3,785 liters.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



 
ASC Engineered Solutions 
75 Portsmouth Boulevard
Suite 210 
Portsmouth, NH 03801 
United States 
281-949-2500


Facility : Incheon, Republic of Korea

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Valves [G]
Series 401/402 (Class 150) High Performance Butterfly Valve[1] 2" - 72" CLD 23 MLTPL
Series 403 (Class 150) High Performance Butterfly Valve[2] 3" - 72" CLD 23 MLTPL
Series 421/422 (Class 300) High Performance Butterfly Valve[1] 2" - 48" CLD 23 MLTPL
Series 423 (Class 300) High Performance Butterfly Valve[2] 3" - 48" CLD 23 MLTPL
Series 451/452 (Class 600) High Performance Butterfly Valve[1] 3" - 24" CLD 23 MLTPL
Series 453 (Class 600) High Performance Butterfly Valve[2] 4" - 24" CLD 23 MLTPL

[1] Certified for trims 100, 101, 102, 103, 118, 125, 126, 129, 182, and 183.
[2] Certified for trims 102, 103, 125, 126, 183.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



 
ASC Engineered Solutions, LLC 
75 Portsmouth Boulevard
Suite 210 
Portsmouth, NH 03801 
United States 
603-418-2800
Visit this company's website


Facility : Dayton, NJ

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Service Saddles[1] [G]
Gruvlok Figure 6045 Copper Mechanical Outlet Tee 2 1/2x3/4"-4x1 1/2" C. HOT MLTPL
Gruvlok Figure 6047 Copper Mechanical Outlet Cross 2 1/2x3/4"-4x1 1/2" C. HOT MLTPL

[1] Certified for the following configurations:
    2 1/2" x 3/4"
    2 1/2" x 1"
    2 1/2" x 1 1/2"
    3" x 3/4"
    3" x 1"
    3" x 1 1/2"
    4" x 3/4"
    4" x 1"
    4" x 1 1/2"
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



 
ASCO, L.P. 
160 Park Avenue
Florham Park, NJ 07932 
United States 
973-966-2000
Visit this company's website


Facility : Aiken, SC

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Solenoid Valves [G]
L172P (A,BB,C,D,E,F,G,HH)[8] 1/8" - 1/4" C. HOT MLTPL
L174P (A,BB,C,D,E,F,G,HH)[8] 1/8" - 1/4" C. HOT MLTPL
L176P (A,BB,C,D,E,F,G,HH)[8] 1/8" - 1/4" C. HOT MLTPL
L372P (A,BB,C,D,E,F,G,HH)[8] 1/8" - 1/4" C. HOT MLTPL
L374P (A,BB,C,D,E,F,G,HH)[8] 1/8" - 1/4" C. HOT MLTPL
L376P (A,BB,C,D,E,F,G,HH)[8] 1/8" - 1/4" C. HOT MLTPL

[1] XX  - U, SU, or SC
    VVV - 201 - 224
    YYY - 101 - 124
    WW  - 05, 06, 07, or 08
    Z   - A, C, or G
[2] XX (coil electrical connection) - S0, L0, L1
    YYY (pressure vessel option)    - 100, 101, 200, 201
    ZZ (voltages)                   - D*, E*, F*
[3] Product requires a 15-minute flush prior to use.
[4] WWW (item number) - 001, 005, 007, 019, 023, 025, 037, 041, 043, 055, 059, 061
[5] WWW (item number) - 002, 006, 008, 020, 024, 026, 038, 042, 044, 056, 060, 062
[6] WWW (item number) - 004, 010, 012, 022, 028, 030, 040, 046, 048, 058, 064, 066
[7] WWW (item number) - 003, 009, 011, 021, 027, 029, 039, 045, 047, 057, 063, 065
[8] A, BB, C, D, E, F, G, HH
    A (Body Material) - S
    BB (Edition) - 05, 06, 07, 08
    C (Port Size/ Type) - A, B, 1, 2
    D (Size) A, B, C, E, 0, 1, 5, 6, 9
    E (Electrical Related) - any one alphanumeric digit
    F (Electrical Related) - any one alphanumeric digit
    G (Electrical Related) - any one alphanumeric digit
    HH (Electrical Related) - any two alphanumeric digits
[9] RRR (item numbers) - 038, 042, 044, 138, 142, 144
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.
[10] ZZ (Voltage) - **
[11] RRR (item numbers) - 040, 046, 048, 140, 146, 148
[12] RRR (item numbers) - 001, 002, 038, 042, 044, 138, 142, 144

Valves [G]
L172P (A,BB,C,D,E,F,G,HH)[8] 1/8" - 1/4" C. HOT MLTPL
L174P (A,BB,C,D,E,F,G,HH)[8] 1/8" - 1/4" C. HOT MLTPL
L176P (A,BB,C,D,E,F,G,HH)[8] 1/8" - 1/4" C. HOT MLTPL
L372P (A,BB,C,D,E,F,G,HH)[8] 1/8" - 1/4" C. HOT MLTPL
L374P (A,BB,C,D,E,F,G,HH)[8] 1/8" - 1/4" C. HOT MLTPL
L376P (A,BB,C,D,E,F,G,HH)[8] 1/8" - 1/4" C. HOT MLTPL

[1] XX  - U, SU, or SC
    VVV - 201 - 224
    YYY - 101 - 124
    WW  - 05, 06, 07, or 08
    Z   - A, C, or G
[2] XX (coil electrical connection) - S0, L0, L1
    YYY (pressure vessel option)    - 100, 101, 200, 201
    ZZ (voltages)                   - D*, E*, F*
[3] Product requires a 15-minute flush prior to use.
[4] WWW (item number) - 001, 005, 007, 019, 023, 025, 037, 041, 043, 055, 059, 061
[5] WWW (item number) - 002, 006, 008, 020, 024, 026, 038, 042, 044, 056, 060, 062
[6] WWW (item number) - 004, 010, 012, 022, 028, 030, 040, 046, 048, 058, 064, 066
[7] WWW (item number) - 003, 009, 011, 021, 027, 029, 039, 045, 047, 057, 063, 065
[8] A, BB, C, D, E, F, G, HH
    A (Body Material) - S
    BB (Edition) - 05, 06, 07, 08
    C (Port Size/ Type) - A, B, 1, 2
    D (Size) A, B, C, E, 0, 1, 5, 6, 9
    E (Electrical Related) - any one alphanumeric digit
    F (Electrical Related) - any one alphanumeric digit
    G (Electrical Related) - any one alphanumeric digit
    HH (Electrical Related) - any two alphanumeric digits
[9] RRR (item numbers) - 038, 042, 044, 138, 142, 144
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.
[10] ZZ (Voltage) - **
[11] RRR (item numbers) - 040, 046, 048, 140, 146, 148
[12] RRR (item numbers) - 001, 002, 038, 042, 044, 138, 142, 144



 
Ashcroft Inc. 
250 East Main Street
Stratford, CT 06614-5145 
United States 
203-378-8284
Visit this company's website


Facility : Stratford, CT

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Pressure Gauges [G]
1009-SW Duralife® Pressure Gauge[1] 1/8 - 1/2 in. C. HOT MLTPL

[1] Certified for stainless steel tube and process connection only.
    
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

Miscellaneous Process Devices/Components [G]
Type 80 Wafer Isolation Ring[3] 2 - 20 in. C. HOT MLTPL

[2] Certified for a stainless steel diaphragm and bottom housing only. Any components can be
    used above the diaphragm seal as they do not have water contact.
[3] Certified for SS316L end plate and EPDM liner. Any components can be used above the
    isolation ring as they do not have water contact.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



 
Ashland Water Group, Inc. 
P.O. Box 3795
Mansfield, OH 44907 
United States 
800-346-7611 
419-747-9552


Facility : Zhejiang, China

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Switches/Sensors[1] [G]
ECO-FLO® EFPSW2040 3.9" x 2.7" x 3.4" CLD 23 MLTPL
ECO-FLO® EFPSW3050 3.9" x 2.7" x 3.4" CLD 23 MLTPL
ECO-FLO® EFPSW4060 3.9" x 2.7" x 3.4" CLD 23 MLTPL
ECO-FLO® EFPSWL2040 3.9" x 2.7" x 3.4" CLD 23 MLTPL
ECO-FLO® EFPSWL3050 3.9" x 2.7" x 3.4" CLD 23 MLTPL

[1] Size shown is length x width x height.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



 
Assmann Corporation of America 
300 North Taylor Road
Garrett, IN 46738 
United States 
888-357-3181 
260-357-3181
Visit this company's website


Facility : Garrett, IN

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Chemical Storage Tanks[1] [2]
IFT 550 or 950 gal. CLD 23 PEX
IHFS 55 - 500 gal. CLD 23 PEX

[1] Certified for use with the following media at the maximum concentration listed below.
    These products are evaluated by diluting the stored water treatment chemical to its
    maximum use level (MUL), as defined in NSF/ANSI/CAN 60. 
    Acetic Acid (80%) 
    Aluminum Chlorohydrate (100%) 
    Aluminum Sulfate (50%) 
    Calcium Carbonate (100%) 
    Calcium Chloride (30%) 
    Chlorine Dioxide (38%) 
    Citric Acid (100%) 
    Copper Sulfate (25%) 
    Ferric Chloride (50%) 
    Ferric Sulfate (60%) 
    Ferrous Chloride (37%) 
    Ferrous Sulfate (25-30%) 
    Hydrochloric Acid (37%) 
    Hydrofluoric Acid (52%) 
    Hydrofluorosilicic Acid (30%) 
    Hydrogen Peroxide (10%)
    Liquid Ammonium Sulfate (45%) 
    Magnesium Chloride (35%) 
    Methyl Alcohol (100%) 
    Peracetic Acid (30%)
    Phosphoric Acid (50-75%) 
    Poly Aluminum Chloride (100%) 
    Polyorthophosphate (100%) 
    Potassium Hydroxide (50%)
    Potassium Permanganate (4%) 
    Sodium Aluminate (100%) 
    Sodium Bisulfite (40%) 
    Sodium Carbonate (85%)
    Sodium Chloride (26%) 
    Sodium Chlorite (34%) 
    Sodium Hydroxide (50%) 
    Sodium Hypochlorite (15%)
    Sodium Permanganate (40%) 
    Sodium Silicate (100%) 
    Sulfuric Acid (98%) 
    Zinc Orthophosphate (100%)
[2] Only products bearing the NSF Mark are Certified. Certification does not include
    fittings, gaskets, or any other accessories supplied by Assmann Corporation.
    Certification is only for natural or black colored tanks with natural or black colored
    lids or manway covers as molded by Assmann.



 
Assured Automation 
263 Cox Street
Roselle, NJ 07203 
United States 
800-899-0553 
732-381-2255
Visit this company's website


Facility : Ningbo, China

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Couplings[1] [G]
WM-NLC-F-050 1/2" D. HOT MLTPL
WM-NLC-F-075 3/4" D. HOT MLTPL
WM-NLC-F-100 1" D. HOT MLTPL
WM-NLC-F-125 1 1/4" D. HOT MLTPL
WM-NLC-F-150 1 1/2" D. HOT MLTPL
WM-NLC-F-200 2" D. HOT MLTPL

[1] Certified for use in water meters only.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

Water Meters[G]
D10-NSF-050 5/8" x 1/2" CLD 23 MLTPL
D10-NSF-075 5/8" x 3/4" CLD 23 MLTPL
D10-NSF-075100 3/4" x 1" CLD 23 MLTPL
D10-NSF-100 1" CLD 23 MLTPL
D10-NSF-150F 1 1/2" CLD 23 MLTPL
D10-NSF-200F 2" CLD 23 MLTPL
D10-NSF-7575 3/4" X 3/4" CLD 23 MLTPL
D10-NSF-7575S 3/4" SL CLD 23 MLTPL
WM-NLC-200(F) 2" CLD 23 MLTPL

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



 
Atlantium Technologies Ltd. 
11 HaMelacha Street
99100 Har Tuv Industrial Park 
Israel 
800-596-2609 
972 2 992500
Visit this company's website


Facility : Rajasthan, India

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Ultra-Violet Reactors[1] [2] [G]
R200 Hydro Optic Disinfection 6" CLD 23 MLTPL
RS104 Hydro Optic Disinfection 4" CLD 23 MLTPL
RZ104 Hydro Optic Disinfection 4" CLD 23 MLTPL
RZ163 Hydro Optic Disinfection 6" CLD 23 MLTPL
RZ163-DPM Hydro Optic Disinfection 6" CLD 23 MLTPL
RZ300 Hydro Optic Disinfection 10", 14" CLD 23 MLTPL
RZ300-DPM Hydro Optic Disinfection 10", 14" CLD 23 MLTPL
RZB300 Hydro Optic Disinfection 10", 14" CLD 23 MLTPL
RZB300-DPM Hydro Optic Disinfection 10", 14" CLD 23 MLTPL
RZM350 Hydro Optic Disinfection 14" CLD 23 MLTPL

[1] For use in municipal water treatment plants only.
[2] Certified for the following minimum flow rates (gallons per day):
    RZ104 and RS104 - 11,520
    RZ163 and RZ163-DPM- 17,280
    R200 - 17,280
    RZ300, RZ300-DPM, RZB300 and RZB300-DPM - 115,200
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



Facility : Har Tuv Industrial Park, Israel

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Ultra-Violet Reactors[1] [2] [G]
R200 Hydro Optic Disinfection 6" CLD 23 MLTPL
RS104 Hydro Optic Disinfection 4" CLD 23 MLTPL
RZ104 Hydro Optic Disinfection 4" CLD 23 MLTPL
RZ163 Hydro Optic Disinfection 6" CLD 23 MLTPL
RZ163-DPM Hydro Optic Disinfection 6" CLD 23 MLTPL
RZ300 Hydro Optic Disinfection 10", 14" CLD 23 MLTPL
RZ300-DPM Hydro Optic Disinfection 10", 14" CLD 23 MLTPL
RZB300 Hydro Optic Disinfection 10", 14" CLD 23 MLTPL
RZB300-DPM Hydro Optic Disinfection 10", 14" CLD 23 MLTPL
RZM350 Hydro Optic Disinfection 14" CLD 23 MLTPL

[1] Certified for use in municipal water treatment plants only.
[2] Certified for the following minimum flow rates (gallons per day):
    RZ104 and RS104                         - 11,520
    RZ163 and RZ163-DPM                     - 17,280
    R200                                    - 17,280
    RZ300, RZ300-DPM, RZB300 and RZB300-DPM - 115,200
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



 
B&K LLC 
150 SCHILLING BLVD Suite 102
Collierville, TN 38017 
United States 
901-753-3261


Facility : # 2 Thailand

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Valves[G]
PXA300-003 1/2" Press x 1/2" F1960 Adapter 3/8" - 2" C. HOT MLTPL
PXA300-004 3/4" Press x 3/4" F1960 Adapter 3/8" - 2" C. HOT MLTPL
PXA300-005 1" Press x 1" F1960 Adapter 3/8" - 2" C. HOT MLTPL
PXA300-043 3/4" Press x 1/2"F1960 Adapter 3/8" - 2" C. HOT MLTPL

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



 
Badger Meter, Inc. 
4545 West Brown Deer Road
Milwaukee, WI 53223 
United States 
414-371-5744
Visit this company's website


Facility : Milwaukee, WI

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Water Meters [3] [G]
FSAA-01[10] 4" - 10" x 12" CLD 23 MLTPL
FSMA-01 3" - 10" CLD 23 MLTPL

[1] Complies with US EPA Maximum Contaminant Levels (MCLs) for PFAS according to
    NSF/ANSI/CAN 61.
[3] Product also complies with NSF/ANSI 372.
[4] E-Series G2 Ultrasonic Meter & Dynasonics® U500W:		
    5/8" x 7-1/2"	
    5/8" x 3/4" x 7-1/2"	
    3/4" x 7-1/2"
    3/4" x 9"		
    3/4" x 1" x 9"		
    1" x 10-1/4"
[5] Dynasonics® U500W Ultrasonic Meters
    2" x 10"
    2" x 17"
    3" x 17"
    3" x 12"
    4" x 20"
    4" x 14"
    6" x 18"
    6" x 24"
    8" x 20"
    10"
    12"
[6] E-Series® & Dynasonics® U500W
    1 1/2" x 12 5/8"
    1 1/2" x 13"
    2" x 15 1/4"
    2" x 17"
    
    E-Series® only
    1 1/2" x 300mm (DN40)
    1 1/2" x 330mm (DN40)
    2" (DN50)
[7] E-Series G2 Ultrasonic Meter:
    1.5" x 12.625"
    1.5" x 13"
    2" x 10"
    2" x 15.25"
    2" x 17"
    3'' x 17''
    3'' x 12''
    4'' x 20''
    4'' x 14''
    6" x 24"
    6" x 18"
    8" x 20"
    10"
    12"
[8] 5/8" x 3/4" x 7 1/2"
    3/4" x 7 1/2"
    3/4" x 9"
[9] Certification of the E-Series® Ultrasonic Plus (valve ready) covers the unmodified water
    meter only. Certification does not include meters that have been retrofitted
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.
[10] FSAA-01 Water Meters are Certified for the following sizes and configurations: 
     FSAA-01 w/ 2" LL turbo meter bypass (4-10, 10 x 12 in.)  
     FSAA-01 w/ 1" M70 LL disc meter bypass (4-6 in.) 
     FSAA-01 w/ 1.5" M170 LL disc meter bypass (6 in.) 
     FSAA-01 w/ 2" M170 LL disc meter bypass (6-10, x 10 x 12 in.)
[11] M25 PN is Certified in the following sizes:
     5/8" x 7 1/2"
     5/8" x 3/4" x 7 1/2"
     3/4" x 9”
[12] M25 LL is Certified for the following sizes:	
     5/8" x 3/4" x 7 1/2"	
     5/8" x 7 1/2"	
     	
     M35 LL is Certified for the following sizes:	
     3/4" x 7 1/2"	
     3/4" x 9"	
     	
     M55 LL is Certified for the following size:	
     1" x 10 3/4"	
     	
     M70 LL is Certified for the following size:	
     1" x 10 3/4"



Facility : Racine, WI

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Water Meters [G]
M-Series® M1000 Flanged 1/2" - 8" D. HOT MLTPL
M-Series® M5000 Flanged 1/2" - 24" D. HOT MLTPL
M-Series® Mag Meter M1000 Flanged 1/2" - 8" D. HOT MLTPL
M-Series® Mag Meter M5000 Flanged 1/2" - 24" D. HOT MLTPL
M-Series® Mag Meter Model M2000 Flanged 1/2" - 54" D. HOT MLTPL
M-Series® Model M2000 Flanged 1/2" - 54" D. HOT MLTPL
MagnetoFlow® Flanged 1/2" - 54" D. HOT MLTPL
MagnetoFlow® Wafer 1" - 4" D. HOT MLTPL
Magnetoflow® Mag Meter Flanged 1/2" - 54" D. HOT MLTPL
Magnetoflow® Mag Meter Wafer 1" - 4" D. HOT MLTPL

[1] E-Series G2 Ultrasonic Meter & Dynasonics® U500W: 
    5/8" x 7 1/2"  
    5/8" x 3/4" x 7 1/2" 
    3/4" x 7 1/2"
    3/4" x 9"
    3/4" x 1" x 9"
    1" x 10 1/4"
[2] M25 LL is Certified for the following sizes: 
    5/8" x 3/4" x 7 1/2" 
    5/8" x 7 1/2" 
[3] M35 LL is Certified for the following sizes:
    3/4" x 7 1/2"
    3/4" x 9"
[4] M55 LL is Certified for the following size:
    1" x 10 3/4"
[5] M70 LL is Certified for the following size:
    1" x 10 3/4"
[6] E- Series G2 Ultrasonic Meter & Dynasonics® U500W:
    DN15 x 110 mm
    DN15 x 114 mm
    DN15 x 165 mm
    DN20 x 190 mm
    DN25 x 260 mm
[8] Complies with US EPA Maximum Contaminant Levels (MCLs) for PFAS according to
    NSF/ANSI/CAN 61.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
      documentation shipped with the product are Certified.


Facility : Brno, Czech Republic

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Water Meters[G]
M-Series® M1000 Flanged 1/2 - 8" D. HOT MLTPL
M-Series® M5000 Flanged 1/2 - 24" D. HOT MLTPL
M-Series® Mag Meter M1000 Flanged 1/2 - 8" D. HOT MLTPL
M-Series® Mag Meter M5000 Flanged 1/2 - 24" D. HOT MLTPL
M-Series® Mag Meter Model M2000 Flanged 1/2 - 54" D. HOT MLTPL
M-Series® Model M2000 Flanged 1/2 - 54" D. HOT MLTPL
MagnetoFlow® Flanged 1/2 - 54" D. HOT MLTPL
MagnetoFlow® Wafer 1- 4" D. HOT MLTPL
Magnetoflow® Mag Meter Flanged 1/2 - 54" D. HOT MLTPL
Magnetoflow® Mag Meter Wafer 1- 4" D. HOT MLTPL

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



 
Baski Water Instruments, Inc. 
4002 S. Clay Street
Sheridan, CO 80110 
United States 
303-789-1200


Facility : Sheridan, CO

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Valves[G]
Baski Flow Control Valve (10x6) 10" x 6" CLD 23 MLTPL
Baski Flow Control Valve (12x8) 12" x 8" CLD 23 MLTPL
Baski Flow Control Valve (16x10) 16" x 10" CLD 23 MLTPL
Baski Flow Control Valve (6x3) 6" x 3" CLD 23 MLTPL
Baski Flow Control Valve (8x5) 8" x 5" CLD 23 MLTPL

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



 
Bedford Reinforced Plastics, LLC 
1 Corporate Drive, Suite 106
Bedford, PA 15522-7401 
United States 
814-623-8125
Visit this company's website


Facility : Bedford, PA

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Miscellaneous Process Devices/Components
10' ReadyLadder / BRP_READY_LADDER_10P_NSF [2] CLD 23 MLTPL
10' ReadyLadder / BRP_READY_LADDER_10V_NSF [2] CLD 23 MLTPL
15' ReadyLadder / BRP_READY_LADDER_15P_NSF [2] CLD 23 MLTPL
15' ReadyLadder / BRP_READY_LADDER_15V_NSF [2] CLD 23 MLTPL
ReadyLadder / BRP_LADDER_WALKTHRU_KIT_P_NSF [2] CLD 23 MLTPL
ReadyLadder / BRP_LADDER_WALKTHRU_KIT_V_NSF [2] CLD 23 MLTPL
STD Flight Channel [1] D. HOT FRP
Water Filtration Parts [1] D. HOT FRP
Wide Flange Beam [1] D. HOT FRP

[1] All sizes. Certification is based on an intended end use in a water treatment
    facilities.  Parts can be made using reinforced Polyester or Vinylester resin.
[2] Certified for:
    10' ReadyLadder + Walk Through Kit for 8,000 gallon tanks and greater.
    15' ReadyLadder + Walk Through Kit for 10,000 gallon tanks and greater.
    Parts can be made using reinforced Polyester or Vinylester resin.



 
Beijing OriginWater Membranes Technology Co., Ltd 
No. 4, Leyuan South 2nd Street
Yanqi Economic Development Zone 
Huairou District, Beijing 101400 
China 
86 13581929890


Facility : Beijing, China

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Reverse Osmosis Element[1] [2] [3] [G]
R-SW8040-HF(440) 8" x 40" CLD 23 MLTPL
R-SW8040-HF(400) 8" x 40" CLD 23 MLTPL
R-BW8040-FR(400) 8" x 40" CLD 23 MLTPL
ZD-FR 8" x 40" CLD 23 MLTPL

[1] Products require a pre-service flush at a flow rate of 40 liters per minute for 2 hours
    using deionized water.
[2] The following products are certified for a minimum daily permeate generation of:
    R-BW8040-FR(400) - 35,400 liters
    R-BW8040-LP(440) - 37,000 liters
    R-BW8040-ULP(400) - 33,800 liters
    R-BW8040-ULP(440) - 37,000 liters
    R-SW8040-HR(400) - 22,500 liters
    R-SW8040-HR(440) - 24,800 liters
    R-SW8040-HF(400) - 29,000 liters
    R-SW8040-HF(440) - 31,900 liters
    ZD-FR - 33,800 liters
    ZD-HP7 - 28,300 liters
[3] Naming convention is as follows:
    R - SW - Reverse osmosis membrane element for seawater desalination 
    R - BW - Brackish water reverse osmosis membrane element
    ZD - Zero emission membrane element
    
    80 - 8 inch diameter membrane element
    40 - 40 inch length membrane element
    
    HR - High rejection 
    HF - High flux
    FR - Anti-pollution
    LP - Low pressure
    ULP - Ultra-low pressure
    HP7 - High pressure resistant
    
    The 400 and 440 in the trade name indicate the active membrane surface area in square
    feet.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



 
Beijing Scinor Membrane Technology Co., Ltd. 
21st Floor, Tower C, Vantone Center,
Chaoyang District, 
Beijing 100020 
China 
86 106 975 6503
Visit this company's website


Facility : # 1 China

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Ultrafiltration Devices[1] [2]
SMT600-P23[3] 119 mm x 1157 mm CLD 23 MLTPL
SMT600-P38[3] 119 mm x 1800 mm CLD 23 MLTPL
SMT600-P40[3] 160 mm x 1813 mm CLD 23 MLTPL
SMT600-P50[3] 160 mm x 2321 mm CLD 23 MLTPL
SMT600-P51[3] 225 mm x 1860 mm CLD 23 MLTPL
SMT600-P52[3] 225 mm x 1708 mm CLD 23 MLTPL
SMT600-P53[3] 250 mm x 1527 mm CLD 23 MLTPL
SMT600-P55[3] 225 mm x 1887 mm CLD 23 MLTPL
SMT600-P56[3] 180 mm x 1920 mm CLD 23 MLTPL
SMT600-P57[3] 250 mm x 1360 mm CLD 23 MLTPL
SMT600-P60[3] 200 mm x 1881 mm CLD 23 MLTPL
SMT600-P72[3] 200 mm x 2160 mm CLD 23 MLTPL
SMT600-P80[3] 225 mm x 2360 mm CLD 23 MLTPL
SMT600-P81[3] 250 mm x 2117 mm CLD 23 MLTPL
SMT600-S26[4] 130 mm x 1192 mm CLD 23 MLTPL
SMT600-S28[4] 130 mm x 1192 mm CLD 23 MLTPL
SMT600-S35[4] 170 mm x 1600 mm CLD 23 MLTPL
SMT600-S40[4] 180 mm x 1337 mm CLD 23 MLTPL
SMT600-S48[4] 180 mm x 1337 mm CLD 23 MLTPL
SMT600-S50[4] 170 mm x 2209 mm CLD 23 MLTPL
SMT600-S51[4] 180 mm x 1654 mm CLD 23 MLTPL
SMT600-S60[4] 180 mm x 1654 mm CLD 23 MLTPL

[1] Size is expressed as OD x length.
[2] Certified for a minimum daily flow of 31,200 L.
[3] Membranes should be flushed with tap water for 10 minutes before being placed into
    service at the following flow rates:			
    SMT600-P23 at 38 liters per minute			
    SMT600-P38 at 63 liters per minute			
    SMT600-P40 at 67 liters per minute			
    SMT600-P50 at 85 liters per minute			
    SMT600-P51 at 85 liters per minute			
    SMT600-P52 at 85 liters per minute			
    SMT600-P55 at 90 liters per minute			
    SMT600-P56 at 93 liters per minute			
    SMT600-P57 at 93 liters per minute			
    SMT600-P60 at 99 liters per minute			
    SMT600-P72 at 120 liters per minute			
    SMT600-P80 at 134 liters per minute			
    SMT600-P81 at 133 liters per minute
[4] The following membranes should be flushed by submerging the module in a tank and
    allowing it to run with tap water for 10 minutes before being placed into service at the
    following flow rates:	
    SMT600-S26 at 43 liters per minute
    SMT600-S28 at 47 liters per minute
    SMT600-S30 at 60 liters per minute
    SMT600-S50 at 85 liters per minute
    The water in the tank should then be drained.

NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
      documentation shipped with the product are Certified.


 
Bermad CS Ltd 
Kibbutz Evron 2280800
Israel 
972 4 985 5311
Visit this company's website


Facility : Kibbutz, Evron, Israel

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Valves
70F[G] 1 1/2" - 36" D. HOT MLTPL
80F[G] 1 1/2" - 36" D. HOT MLTPL

[1] 1000 valves have threaded, flanged or grooved end connections.
    Certified for nylon bodies, EPDM elastomers and diaphragm.
    
    Certified for the following optional control trim:
    
    POM fittings
    Plastic tube
    Stainless Steel 316 Tubes
    Stainless Steel 316 Fittings
    Pilot PA (2/3 way- DWG S58\ALT_PI_82, DWG S58\ALT_PI_8_316) with stainless steel body
    Pilot PBL(2/3 way) bronze body
    Pilot PBL(2/3 way), stainless steel body
    Pilot PC (2 way- DWG S58-0-NAVATON) with stainless steel body
    Solenoid Pilot Valve 0330, AISI Body
    Modulating Horizontal Float, AISI Body
    Ball Valve with Stainless Steel Body 990126XXXX
    Needle Valve, AISI Body
    Self Flushing Filter
    Hydraulic Relay (Amplifier)
    Y - Strainer with Stainless Steel Body 99900XXXXX
[2] For the 350 Series valves:
    54, 55 and XX indicate the way of actuating the valve
    54 - actuation by Hydraulic Accelerator
    55 - actuation by electric solenoid pilot
    XX - other options for external actuation
    350 valves: Certified for nylon bodies (P), Plastic Tubing & Fittings (PP), EPDM
    Elastomer Seals, and Stainless Steel Seat &
    Shaft (T).
[3] 700, and Sigma 700 EN/ES Series Control Valves are Certified for use with the following
    optional control trim:
    Male Connector 768L
    Hex, Nipple 122H
    Male Elbow 769L
    Elbow 100H
    Male Branch Tee 772
    Branch Tee 3600H
    Tube (SS 316/316L)
    Pilot PBL(2/3 way) Bronze Body
    Pilot PB with Stainless Steel Body
    Pilot PBL with Stainless Steel Body
    Pilot PA with Stainless Steel Body
    Pilot HC with Stainless Steel Body
    Solenoid Pilot Valve 0330
    Self-Flushing Filter
    Y - Strainer with Stainless Steel Body 99900XXXXX
    Check Valve H 410 SS
    Ball Valve with Stainless Steel Body and ball 99012XXXXX
    Needle Valve with Stainless Steel Body and stem 5004AXXXXX
    Needle Valve with Stainless Steel Body and stem 5005AXXXXX
    * Control Valve, Pilot, Needle Valve, Tubes, Fittings, Ball Valve, Y strainer or
    self-flush filter
    * Control Valve, Pilot, Tubes, Fittings, Ball Valve, Y strainer or self-flush filter
    * Control Valve, Solenoid, Needle Valve, Relay, Tubes, Fittings, Ball Valve, Y strainer
    or self-flush filter
[4] 800 Series Control Valves are Certified for use with the following optional control
    trim:
    
    Male Connector 768L
    Hex, Nipple 122H
    Male Elbow 769L
    Elbow 100H
    Male Branch Tee 772
    Branch Tee 3600H
    Pilot PB with Stainless Steel Body
    Pilot PA with Stainless Steel Body
    Pilot HC with Stainless Steel Body
    Pilot PBL(2/3 way) Bronze Body
    Self Flushing Filter
    Y - Strainer with Stainless Steel Body 99900XXXXX
    Check Valve H 410 SS
    Ball Valve with Stainless Steel Body and ball 99012XXXXX
    Needle Valve with Stainless Steel Body and stem 5004AXXXXX
    Needle Valve with Stainless Steel Body and stem 5005AXXXXX
    Solenoid Pilot Valve 6011
    Solenoid Pilot Valve 6013
    Solenoid Pilot Valve 6213
    Solenoid Pilot Valve 0330
    Solenoid Pilot Valve 331
    Hydraulic Relay (Amplifier)
    Stainless Steel 316 Tubes and Fittings
    
    The following configurations are Certified:
    * Control Valve, Pilot, Needle Valve, Tubes, Fittings, Ball Valve, Y strainer or
    self-flush filter
    * Control Valve, Pilot, Tubes, Fittings, Ball Valve, Y strainer or self-flush filter
    * Control Valve, Solenoid, Needle Valve, Relay, Tubes, Fittings, Ball Valve, Y strainer
    or self-flush filter
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



 
BERMAD CS Ltd. 
Kibbutz Evron
2280800 
Israel 
972 4 9855311


Facility : Mestrino, Padova, Italy

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Water Meters[G]
MUT1000US Wafer flowmeter (full bore) 25 mm - 300 mm D. HOT MLTPL
MUT2200US flanged flowmeter (full bore) 15 mm - 2000 mm D. HOT MLTPL
MUT2300US flanged flowmeter (reduced bore) 50 mm - 300 mm D. HOT MLTPL

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



 
BIOREM Technologies Inc. 
7496 Wellington Road
Puslinch, ON N0B 2J0 
Canada 
519-767-9100
Visit this company's website


Facility : Victor, NY

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Miscellaneous Process Devices/Components [G]
Degasifier[1] 2-20 in CLD 23 MLTPL

[1] Certified for a minimum flow of 16,353 L/day.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



 
Blue-White Industries, Ltd. 
5300 Business Drive
Huntington Beach, CA 92649 
United States 
714-893-8529
Visit this company's website


Facility : Huntington Beach, CA

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Chemical Metering Pumps
Chem-Pro Diaphragm Metering Pump MunicIpal Version MD-ABCDEFGHI[1] [2] 1/2" CLD 23 MLTPL
Chem-Pro Diaphragm Metering Pump Municipal Version C-ABCDEFGHI[1] [2] 1/4" - 1/2" CLD 23 MLTPL
Chem-Pro Diaphragm Metering Pump Municipal Version MC-ABCDEFGHI[1] [2] 1/4" - 1/2" CLD 23 MLTPL
FLEX-FLO® A1Nabc-de-f-ghij[4] [5] [12] 1/4" - 7/16" CLD 23 MLTPL
FLEX-PRO® M-abc-de-f[4] [7] [12] 1/4" - 3/4" CLD 23 MLTPL
FLEXFLO® M1a-bc[4] [6] [12] 1/4" - 7/16" CLD 23 MLTPL
FLEXFLO® Mabcd-ef-g[9] [10] [12] 1/2" - 1 1/2" CLD 23 MLTPL
FLEXFLO® Mabcd-ef-g[4] [8] [12] 1/4" - 3/4" CLD 23 MLTPL

[1] A: Series
    2  -  Smaller overall size (width and length)
    3  -  Larger overall size (width and length)
    B:
    S  -  Smart
    Blank  -  Standard
    C: Maximum strokes per minute
    D: Input voltage / power cord
    E: Stroke length / diaphragm size
    1  -  .060'' stroke / small diaphragm (MC-2) or .060'' stroke / large diaphragm (MC-3)
    2  -  .060'' stroke / large diaphragm (MC-2) or .100 stroke / large diaphragm (MC-3)
    3  -  .040'' stroke / small diaphragm (MC-2)
    4  -  .100'' stroke / large diaphragm (MC-2, MD-3)
    5  -  .040'' stroke / low flow diaphragm (MC-2)
    6  -  .060'' stroke / low flow diaphragm (MC-2)
    F: Electrical options
    G: Elastomer material (o-rings)
    V  -  FKM & TFE/P
    E  -  EP
    H: Pump head fitting and foot valve
    1  -  1/2'' ID x 3/4'' OD tubing pump head with 1/2'' barb hose footvalve
    2  -  1/4'' ID x 3/8'' OD tubing pump head with 1/4'' foot valve
    3  -  1/2'' male NPT inlet and outlet with 1/2'' M/NPT footvalve
    4  -  1/2'' female NPT inlet and outlet with 1/2'' M/NPT footvalve
    I: Miscellaneous options (may be blank)
    A  -  Hastelloy C check valve balls, PTFE prime valve ball
    B  -  Single 1/2'' ceramic ball and Hastelloy C spring P/head check valve for viscous
    fluids
    -C1/-C2/-C3/-C4/-C5  -  Communications interface
    H  -  PTFE balls (double ball check valve, prime valve) low viscosity/density fluids
    only
    J  -  PTFE balls (single ball with Hastelloy spring check valve, prime valve)
[2] Certified for use with 12.5% sodium hypochlorite or 33% hydrochloric acid. These
    products are evaluated by diluting the exposed water treatment chemical to its maximum
    use level (MUL), as defined in NSF/ANSI/CAN 60.
[3] MD1-ABC:
    A: Elastomer material (O-ring and Diaphragm)
    V: AFLAS, FKM, and Kynar Ultraflex B
    E: EPDM and Santoprene
    B: Stroke length
    1: 0.125 Stroke
    C: Electrical options
[4] Certified for use with the following chemicals:
    
      Norprene tubing or Flex-A-Prene™
      Activated Carbon (100 mg/L)
      Aluminum Chloride - 50%
      Aluminum chlorohydrate (40%) - 40%
      Aluminum Chlorohydrate/Polyaluminum Chloride - 40%
      Aluminum Sodium Sulfate (15%) - 15%
      Aluminum Sulfate (50%) - 50%
      Ammonia, aqueous (35%) - 35%
      Ammonium Hydroxide (29%) - 29%
      Ammonium Sulfate (45%) - 45%
      Calcium carbonate (65%) - 65%
      Calcium Chloride (15%) - 15%
      Calcium Hydroxide - 50%
      Calcium Hypochlorite (15%) - 15%
      Calcium Thiosulfate - 30%
      Chlorine dioxide - 2%
      Copper Sulfate (5%) - 5%
      Copper Sulfate (25%) - 25%
      Deionized Water (100%) - 100%
      Dipotassium Orthophosphate - 50% 
      Disodium Orthophosphate - 50%
      Ferric Chloride (50%) - 50%
      Ferric Sulfate (60%) - 60%
      Ferrous Chloride (40%) - 40%
      Ferrous Sulfate (30%) - 30%
      Fluorosilicic acid - 25%
      Magnesium Sulfate (25%) - 25%
      Poly (Diallyldimethylammonium Chloride)(pDADMAC) - 50%
      Poly Aluminum Chloride (100%) - 100%
      Polyacrylamide (2.5%) - 3%
      Polyaluminum Chloride (45%) - 45%
      Polyaluminum Chlorosulfate - 50%
      Polyaluminum Hydroxychlorosulfate - 75%
      Polyaluminum Silicate Sulfate - 66%
      Polyaluminum Sulfate - 50%
      Potassium Carbonate - 47%
      Potassium Chloride - 34%
      Potassium hydroxide (45%) - 45%
      Potassium Hydroxide (50%) - 50%
      Potassium Permanganate (20%) - 20%
      Potassium Tripolyphosphate - 100%
      Sodium Acid Pyrophosphate - 12%
      Sodium Aluminate - 50%
      Sodium Ascorbate - 60%
      Sodium Bicarbonate - 100%
      Sodium Bisulfate (50%) - 50%
      Sodium Carbonate - 20%
      Sodium Carbonate (85%) - 85%
      Sodium Chlorate - 100%
      Sodium Chloride (26%) - 26%
      Sodium Chlorite (7.5%) - 8%
      Sodium Dichloroisocyanurate - 25%
      Sodium Fluoride (4.0%) - 4%
      Sodium Hydroxide (50%) - 50%
      Sodium Hypochlorite (15%) - 15%
      Sodium Metabisulfite (50%) - 50%
      Sodium Percarbonate - 15%
      Sodium Permanganate (40%) - 40%
      Sodium Polyphosphates - 35%
      Sodium Silicate (100%) - 100%
      Sodium Sulfite (20%) - 20%
      Sodium Trimetaphosphate - 20%
      Sodium Tripolyphosphate - 15%
      Sulfur Dioxide (5%) - 5%
      Tetrapotassium Pyrophosphate - 60%
      Tetrasodium Pyrophosphate - 7%
      Tricalcium Phosphate (70%, slurry) - 70%
      Trichloroisocyanuric Acid- 10%
      Zinc Chloride - 62%
      Zinc Orthophosphate (100%) - 100%
      Zinc Sulfate - 36%
    
      Norprene Chemical tubing
      Acetic Acid (80%) - 80%
      Citric Acid (100%) - 100%
      Hydrochloric acid (38%) - 38%
      Hydrogen Peroxide - 30%
      Peracetic Acid (10%) - 10%
      Phosphoric acid (75%) - 75%
      Polyphosphoric Acid - 100%
      Sulfuric acid (98.5%) - 99%
    
      Flex-A-Thane tubing:
      Aluminum Chloride (50%)
      Aluminum Potassium Sulfate (100%)
      Aluminum Sulfate (50%)
      Calcium Carbonate (25%)
      Calcium Chloride (15%)
      Calcium Hydroxide (20%)
      Copper Sulfate (25%)
      Copper Sulfate (5%)
      Ferric Chloride (43%)
      Ferrous Chloride (40%)
      Ferrous Sulfate (5%)
      Magnesium Sulfate (25%)
      Potassium Carbonate (47%)
      Potassium Chloride (20%)
      Potassium Permanganate (6%)
      Sodium Bicarbonate (7%)
      Sodium Bisulfate (50%)
      Sodium Bisulfite (100%)
      Sodium Carbonate (7%)
      Sodium Chlorate (45%)
      Sodium Chloride (20%)
      Sodium Chlorite (12%)
      Sodium Fluoride (3%)
      Sodium Sulfite (10%)
      Zinc Chloride (80%)
      Zinc Sulfate (30%)
    
    These products are evaluated by diluting the exposed water treatment chemical to its
    maximum use level (MUL), as defined in NSF/ANSI/CAN 60.
    
    *Certified for contact with DI water for purpose of diluting drinking water treatment
    chemicals.
[5] FLEX-FLO® 
    a - 0, 1, 2, or 3 
    b - 0, 1, 2, 5, 6, 7, or 8 
    c - A, P, S, C, E, F, V, X or * 
    d - 4, 6, 7 or 8 
    e - T 
    f - X 
    g - any number 1 through 99 
    h - S M, H or D 
    i - any number 1 through 99 
    j - S M, H or D
[6] FLEX-FLO® M1a-bc
    a - 4, 5, 6, 7, 8, or 9
    b - 1, 3, 6, 7, or 8
    c - T, or M
[7] FLEX-PRO® 
    a - 2, 3, or 4 
    b - 1,2,3,4, or 5 
    c - 4,5,6,8 or X 
    d - S, M, B, C or X 
    e - ND, NF, NH, NJ, NK, NL, NP, NKL, TH, TK, NEE, NGG, NHH, NHHL, THH, NKKL, N2G or N2E 
    f - R, D, or blank
[8] FLEXFLO® Mabcd-ef-g
    a - 2, 3, or 4
    b - S
    c - 1, 2, 3, 4, or 5
    d - 4, 5, 6, 8, 9, or X
    e - S, M, B, C, Q, or MB
    f - ND, NF, NH, NJ, NK, NL, NP, TH, TK, TKK, NKL, NEE, NGG, NHL, NHH, NHHL, THH, NKKL, 
        N2G, N2E, GE, GG, GH, GHH, GK, G2G, or GKK
    g - R or D
[9] Certified for use with the following chemicals with TFE/P o-ring:
    
    Acetic Acid (80%)
    Aluminum Chloride (50%)
    Aluminum chlorohydrate (40%)
    Aluminum Chlorohydrate/Polyaluminum Chloride (40%)
    Aluminum Sodium Sulfate (15%)
    Aluminum Sulfate (50%)
    Ammonia, aqueous (35%)
    Ammonium Hydroxide (29%)
    Ammonium Sulfate (45%)
    Calcium carbonate (65%)
    Calcium Chloride (15%)
    Calcium Hydroxide (50%)
    Calcium Hypochlorite (15%)
    Calcium Thiosulfate - (30%)
    Chlorine dioxide (2%)
    Citric Acid (100%) (100%)
    Copper Sulfate (5%)
    Copper Sulfate (25%)
    Deionized Water (100%)
    Dipotassium Orthophosphate (50%)
    Disodium Orthophosphate (50%)
    Ferric Chloride (50%)
    Ferric Sulfate (60%)
    Ferrous Chloride (40%)
    Ferrous Sulfate (30%)
    Fluorosilicic acid (25%)
    Hydrochloric acid (38%)
    Hydrogen Peroxide (30%)
    Magnesium Sulfate (25%)
    Peracetic Acid (10%)
    Phosphoric acid (75%)
    Poly (Diallyldimethylammonium Chloride)(pDADMAC) (50%)
    Poly Aluminum Chloride (100%)
    Polyacrylamide (3%)
    Polyaluminum Chloride (45%)
    Polyaluminum Chlorosulfate (50%)
    Polyaluminum Hydroxychlorosulfate (75%)
    Polyaluminum Silicate Sulfate (66%)
    Polyaluminum Sulfate (50%)
    Polyphosphoric Acid (100%)
    Potassium Carbonate (47%)
    Potassium Chloride (34%)
    Potassium hydroxide (45%)
    Potassium Hydroxide (50%)
    Potassium Permanganate (20%)
    Potassium Tripolyphosphate (100%)
    Sodium Acid Pyrophosphate (12%)
    Sodium Aluminate (50%)
    Sodium Ascorbate (60%)
    Sodium Bicarbonate (100%)
    Sodium Bisulfate (50%)
    Sodium Bisulfite (40%)
    Sodium Carbonate (20%)
    Sodium Carbonate (85%)
    Sodium Chlorate - 100%
    Sodium Chloride (26%)
    Sodium Chlorite (7.5%)
    Sodium Dichloroisocyanurate (25%)
    Sodium Fluoride (4.0%)
    Sodium Hydroxide (50%)
    Sodium Hypochlorite (15%)
    Sodium Metabisulfite (50%)
    Sodium Percarbonate - (15%)
    Sodium Permanganate (40%)
    Sodium Polyphosphates (35%)
    Sodium Silicate (100%)
    Sodium Sulfite (20%)
    Sodium Trimetaphosphate (20%)
    Sodium Tripolyphosphate (15%)
    Sulfur Dioxide (5%)
    Sulfuric acid (99%)
    Tetrapotassium Pyrophosphate (60%)
    Tetrasodium Pyrophosphate (7%)
    Tricalcium Phosphate (70%, slurry)
    Trichloroisocyanuric Acid (10%)
    Ultra Pure Water
    Zinc Chloride (62%)
    Zinc Orthophosphate (100%)
    Zinc Sulfate (36%)
    * Certified for contact with DI water for the purpose of diluting drinking water
    treatment chemicals.
    
    Certified for use with the following chemicals with EPDM o-ring:
    
    Acetic Acid (80%)
    Aluminum Chloride (50%)
    Aluminum Sodium Sulfate (15%)
    Aluminum Sulfate (50%)
    Ammonium Hydroxide (29%)
    Ammonium Sulfate (45%)
    Calcium carbonate (65%)
    Calcium Chloride (15%)
    Calcium Hydroxide (50%)
    Calcium Hypochlorite (15%)
    Calcium Thiosulfate - (30%)
    Citric Acid (100%) (100%)
    Copper Sulfate (5%)
    Copper Sulfate (25%)
    Ferric Chloride (50%)
    Ferric Sulfate (60%)
    Ferrous Sulfate (30%)
    Fluorosilicic acid (25%)
    Hydrochloric acid (38%)
    Hydrogen Peroxide (30%)
    Magnesium Sulfate (25%)
    Peracetic Acid (10%)
    Phosphoric acid (75%)
    Potassium Carbonate (47%)
    Potassium Chloride (34%)
    Potassium hydroxide (45%)
    Potassium Hydroxide (50%)
    Potassium Permanganate (20%)
    Sodium Aluminate (50%)
    Sodium Bicarbonate (100%)
    Sodium Bisulfate (50%)
    Sodium Bisulfite (40%)
    Sodium Carbonate (20%)
    Sodium Carbonate (85%)
    Sodium Chlorate - 100%
    Sodium Chloride (26%)
    Sodium Chlorite (7.5%)
    Sodium Fluoride (4.0%)
    Sodium Hydroxide (50%)
    Sodium Hypochlorite (15%)
    Sodium Percarbonate - (15%)
    Sodium Silicate (100%)
    Sulfur Dioxide (5%)
    Zinc Chloride (62%)
    Zinc Sulfate (36%)
    
[10] Certified for contact with DI water for the purpose of diluting drinking water treatment
     chemicals.
[12] Pumps can be shipped with tube uninstalled.

[11] FLEXFLO Mabc-de-f:
     a - 5 (Size)
     b - S (Smart)
     c - 1, 2, 3, 4, or 5 (Motor RPM)
     d - 4, 5, 6, 8, 9 or X (Voltage)
     e - M or B (Tube Adapter Type)
     f - NPP (0.75 ID), NLL (0.5 ID), NHHL (0.25 ID), TKKL (0.375 ID), or GKK (0.5 ID) (Tube
     Type)
     g - R (Right Facing)


 
Bonomi North America. Inc. 
750 Imperial Court
Charlotte, NC 28273 
United States 
704-412-9031
Visit this company's website


Facility : Tainjin, China

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Valves
Butterfly Valve with CF8M Disc / N500S 1 1/2" - 12" CLD 23 MLTPL
Butterfly Valve with CF8M Disc / N501S 1 1/2" - 12" CLD 23 MLTPL
Butterfly Valve with Nylon Coated Disc / N500N 1 1/2" - 12" CLD 23 MLTPL
Butterfly Valve with Nylon Coated Disc / N501N 1 1/2" - 12" CLD 23 MLTPL
Wafer Check Valve / NCI150E 2" - 12" CLD 23 MLTPL



 
Brass Pro Industrial Co., Ltd. 
No. 140, Lane 498, Sec. 3, Lu Ho Road
Lukang, Changhua 505 
Taiwan 
886 4 7710612
Visit this company's website


Facility : Changhua, Taiwan

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Valves[G]
106SC, LF 7110SAE 1/4 X 1/4 Needle Valve 1/4" D. HOT MLTPL
106SE, LF 7115SAE 3/8 X 3/8 Needle Valve 3/8" D. HOT MLTPL
3062-5, LF 7107C 5/16 X 5/16 Needle Valve 5/16" D. HOT MLTPL
BP-103KD, LF 7203C 5/16 X 1/8 Needle Valve 5/16" x 1/8" D. HOT MLTPL
BP-104SCC, LF 71104SAE 1/4 X 1/4 Needle Valve 1/4" D. HOT MLTPL
NV104C-4-2, LF 7103C 1/4 X 1/8 Needle Valve 1/4" D. HOT MLTPL
NV104C-4-4, LF 7104C 1/4 X 1/4 Needle Valve 1/4" D. HOT MLTPL
NV105C-4, LF 7106C 1/4 X 1/4 Needle Valve 1/4" D. HOT MLTPL
NV105C-6, LF 7113C 3/8 X 3/8 Needle Valve 3/8' D. HOT MLTPL
NV106C-4-2, LF 7101C 1/4 X 1/8 Needle Valve 1/4" D. HOT MLTPL
NV107P-4, LF 7110P 1/4 Needle Valve 1/4" D. HOT MLTPL
NV108P-2, LF 7305P 1/8 Needle Valve 1/4" D. HOT MLTPL
NV108P-4, LF 73305P 1/4 Needle Valve 1/4" D. HOT MLTPL
NV109P-2, LF 7304P 1/8 Needle Valve 1/4" D. HOT MLTPL
NV109P-4, LF 73304P 1/4 Needle Valve 1/4" D. HOT MLTPL
P-274-44, LF 71101C 1/4 X 1/4 Needle Valve 1/4" D. HOT MLTPL
P-274-64, LF 7143C 3/8 X 1/4 Needle Valve 3/8" x 1/4" D. HOT MLTPL

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



 
Bray International, Inc. 
8323 N. Eldridge Pkwy No 100
Houston, TX 77041 
United States 
832-912-2300
Visit this company's website


Facility : Houston, TX

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Valves[1] [G]
F15 1/2" - 12" CLD 23 MLTPL
F30 1/2" - 12" CLD 23 MLTPL
RF15 1" - 12" CLD 23 MLTPL
RF30 1" - 12" CLD 23 MLTPL

[1] Certified for stainless steel valves only.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



 
Brentwood Industries 
500 Spring Ridge Drive
Reading, PA 19610 
United States 
800-322-7460 
610-374-5109
Visit this company's website


Facility : Reading, PA

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Miscellaneous Process Devices/Components
Polychem Non-Metallic System/ Rectangular Clarifier Collector System [1] CLD 23 MLTPL

[1] Certified for use in tanks 120,000 L and greater in water treatment plants with a
    minimum daily flow of 1,800,000 L.
[2] Certified for use in tanks with a minimum volume of 21,747 liters and minimum daily flow
    of 530,000 liters.



Facility : Martinsburg, WV

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Miscellaneous Process Devices/Components
IFR6000 "Series" Tube Settler Modules [1] CLD 23 PVC
IFR6000 Series CorrugatedBlade [1] [2] CLD 23 PVC
IFR6000 Series WaveBlade [1] [2] CLD 23 PVC

[1] Certified for a flow of 0.5 gallons per minute per square foot and greater.
[2] Certified for a maximum size of 41" x 36" x 16' (height x width x length).

NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
      documentation shipped with the product are Certified.


 
Bright Sheland International Co., Ltd. 
No.5, Ko Kung 1st Road
Douliou, Yunlin Hsien 640 
Taiwan 
886 5 5512322


Facility : Kunshan, Jiangsu, China

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Filtration Devices/Components[1] [2] [G]
Poly-ADCT (PATX-XXP) [3] [4] [5] [6] CLD 23 PP
Puris-Fine (PRSX-XX) [3] [4] [5] [6] CLD 23 PP
Superior-Fine (PCBX-XX) [3] [4] [5] [6] CLD 23 PP

[1] Certification does not include any end connection, gasket, or o-ring options. Product
    has not been evaluated for point-of-end (POE) or point-or-use (POU) end uses.
[2] Certified for a minimum daily flow of 1,870 L per 3" of cartridge length.
[3] X - Retention Rating: 0.5 µm - 200 µm
[4] XX - Cartridge Length: 3" - 100"
[5] Inner Diameter: 28 mm
[6] Outer Diameter: 60 mm - 115 mm
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



 
Brio Water Technology, Inc. 
3860 Capitol Avenue
City of Industry, CA 90601 
United States 
800-781-1680
Visit this company's website


Facility : Guangdong, China

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Reverse Osmosis Element[1] [2]
FLRM1132 4" x 40" CLD 23 MLTPL
FLRM1156 8" x 40" CLD 23 MLTPL
FLRM2825 4" x 40" CLD 23 MLTPL
FLRM2832 8" x 40" CLD 23 MLTPL

[1] FLRM1132 model is certified for a minimum daily flow of 9,500 liters per day.
    FLRM1156 model is certified for a minimum daily flow of 42,000 liters per day.
    FLRM2825 is certified for a minimum daily flow of 8000 liters per day.
    FLRM2832 is certified for a minimum daily flow of 40000 liters per day.
[2] FLRM1132 should be flushed at 1.7 gallons per minute for 1 hour with tap water.
    FLRM1156 should be flushed at 7.7 gallons per minute for 1 hour with tap water.
    FLRM2825 should be flushed at 1.5 gallons per minute for 1 hour with tap water.
    FLRM2832 should be flushed at 7.3 gallons per minute for 1 hour with tap water.



 
Brother Filtration Equipment Trading(WuHan)Co.,Ltd 
8th Floor, Jinhui Center
Jin Yin Hu Street, Dongxihu District 
Wuhan City, Hubei 430000 
China 
86 027 8399 2898
Visit this company's website


Facility : Zhejiang, China

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Filtration Devices/Components[1] [2] [3] [4] [5] [G]
BCMB-PP-[W]-[X]-[Y]-DOE-P-[Z] [6] CLD 23 MLTPL
BCSW-PP-[W]-[X]-[Y]-DOE-P-[Z] [6] CLD 23 MLTPL
BHF-PP-[V]-[W]-[X]-[Y]-DOE-P-[Z] [6] CLD 23 MLTPL
BPDM-PP-[W]-[X]-[Y]-DOE-P-[Z] [6] CLD 23 MLTPL
BROM-PP-[W]-[X]-[Y]-DOE-P-[Z] [6] CLD 23 MLTPL

[1] [V] Country/Buyer codes 
          A/B/C/T/H/I/K/Q/G/Z
[2] [W] Length
           10 - 10 inch
           20 - 20 inch
           30 = 30 inch
           40 - 40 inch
           50 - 50 inch
           60 - 60 inch
           70 - 70 inch
           80 - 80 inch
[3] [X] Filtration Efficiency 
         N - Nominal
         A - Absolute
[4]  [Y] Micron Rating
           0020   - 0.22
           0045   - 0.45
           0100   - 1
           0500   - 5
           1000   - 10
           1500   - 15
           2000   - 20
           4000   - 40
           7000   - 70
           10000 - 100
[5] [Z] Outer Cage
         H - Hard Cage
         N  - Netting
[6] Diameter is 2.5" for all models.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



 
Brother Filtration Equipment Trading (Wuhan) Co., Ltd. 
8th Floor, Jinhui Center, No. 8
Jinyinhu Rd, Dongxihu District, Wuhan 
HuBei Province 430040 
China 
86 27 8399 2898


Facility : # 2 China

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Filtration Devices/Components[1] [2]
F2514-1000E-1W 1 L[3] CLD 23 MLTPL
F2514-1200E-1W 1 L[3] CLD 23 MLTPL
F2514-300E-1W 1 L[3] CLD 23 MLTPL
F2514-600E-1W 1 L[3] CLD 23 MLTPL
F2521-1000E-1W 1 L[3] CLD 23 MLTPL
F2521-1200E-1W 1 L[3] CLD 23 MLTPL
F2521-300E-1W 1 L[3] CLD 23 MLTPL
F2521-600E-1W 1 L[3] CLD 23 MLTPL
F2540-1000E-1W 1 L[3] CLD 23 MLTPL
F2540-1200E-1W 1 L[3] CLD 23 MLTPL
F2540-300E-1W 1 L[3] CLD 23 MLTPL
F2540-600E-1W 1 L[3] CLD 23 MLTPL
F40-1000E-1W 8.7 L[4] CLD 23 MLTPL
F40-1000E-2W 8.7 L[4] CLD 23 MLTPL
F40-1000E-3W 8.7 L[4] CLD 23 MLTPL
F40-1000E-4W 8.7 L[4] CLD 23 MLTPL
F40-1000E-5W 8.7 L[4] CLD 23 MLTPL
F40-1000E-6W 8.7 L[4] CLD 23 MLTPL
F40-1000S-1W 8.7 L[4] CLD 23 MLTPL
F40-1000S-2W 8.7 L[4] CLD 23 MLTPL
F40-1000S-3W 8.7 L[4] CLD 23 MLTPL
F40-1000S-4W 8.7 L[4] CLD 23 MLTPL
F40-1000S-5W 8.7 L[4] CLD 23 MLTPL
F40-1000S-6W 8.7 L[4] CLD 23 MLTPL
F40-1200E-1W 8.7 L[4] CLD 23 MLTPL
F40-1200E-2W 8.7 L[4] CLD 23 MLTPL
F40-1200E-3W 8.7 L[4] CLD 23 MLTPL
F40-1200E-4W 8.7 L[4] CLD 23 MLTPL
F40-1200E-5W 8.7 L[4] CLD 23 MLTPL
F40-1200E-6W 8.7 L[4] CLD 23 MLTPL
F40-1200S-1W 8.7 L[4] CLD 23 MLTPL
F40-1200S-2W 8.7 L[4] CLD 23 MLTPL
F40-1200S-3W 8.7 L[4] CLD 23 MLTPL
F40-1200S-4W 8.7 L[4] CLD 23 MLTPL
F40-1200S-5W 8.7 L[4] CLD 23 MLTPL
F40-1200S-6W 8.7 L[4] CLD 23 MLTPL
F40-300E-1W 8.4 L[4] CLD 23 MLTPL
F40-300E-2W 8.4 L[4] CLD 23 MLTPL
F40-300E-3W 8.4 L[4] CLD 23 MLTPL
F40-300E-4W 8.4 L[4] CLD 23 MLTPL
F40-300E-5W 8.4 L[4] CLD 23 MLTPL
F40-300E-6W 8.4 L[4] CLD 23 MLTPL
F40-300S-1W 8.4 L[4] CLD 23 MLTPL
F40-300S-2W 8.4 L[4] CLD 23 MLTPL
F40-300S-3W 8.4 L[4] CLD 23 MLTPL
F40-300S-4W 8.4 L[4] CLD 23 MLTPL
F40-300S-5W 8.4 L[4] CLD 23 MLTPL
F40-300S-6W 8.4 L[4] CLD 23 MLTPL
F40-450E-1W 8.4 L[4] CLD 23 MLTPL
F40-450E-2W 8.4 L[4] CLD 23 MLTPL
F40-450E-3W 8.4 L[4] CLD 23 MLTPL
F40-450E-4W 8.4 L[4] CLD 23 MLTPL
F40-450E-5W 8.4 L[4] CLD 23 MLTPL
F40-450E-6W 8.4 L[4] CLD 23 MLTPL
F40-450S-1W 8.4 L[4] CLD 23 MLTPL
F40-450S-2W 8.4 L[4] CLD 23 MLTPL
F40-450S-3W 8.4 L[4] CLD 23 MLTPL
F40-450S-4W 8.4 L[4] CLD 23 MLTPL
F40-450S-5W 8.4 L[4] CLD 23 MLTPL
F40-450S-6W 8.4 L[4] CLD 23 MLTPL
F40-600E-1W 8.7 L[4] CLD 23 MLTPL
F40-600E-2W 8.7 L[4] CLD 23 MLTPL
F40-600E-3W 8.7 L[4] CLD 23 MLTPL
F40-600E-4W 8.7 L[4] CLD 23 MLTPL
F40-600E-5W 8.7 L[4] CLD 23 MLTPL
F40-600E-6W 8.7 L[4] CLD 23 MLTPL
F40-600S-1W 8.7 L[4] CLD 23 MLTPL
F40-600S-2W 8.7 L[4] CLD 23 MLTPL
F40-600S-3W 8.7 L[4] CLD 23 MLTPL
F40-600S-4W 8.7 L[4] CLD 23 MLTPL
F40-600S-5W 8.7 L[4] CLD 23 MLTPL
F40-600S-6W 8.7 L[4] CLD 23 MLTPL
F80-1000E-1W 12.6 L[5] CLD 23 MLTPL
F80-1000E-2W 12.6 L[5] CLD 23 MLTPL
F80-1000E-3W 12.6 L[5] CLD 23 MLTPL
F80-1000E-4W 12.6 L[5] CLD 23 MLTPL
F80-1000E-5W 12.6 L[5] CLD 23 MLTPL
F80-1000E-6W 12.6 L[5] CLD 23 MLTPL
F80-1000E-7W 12.6 L[5] CLD 23 MLTPL
F80-1000S-1W 12.6 L[5] CLD 23 MLTPL
F80-1000S-2W 12.6 L[5] CLD 23 MLTPL
F80-1000S-3W 12.6 L[5] CLD 23 MLTPL
F80-1000S-4W 12.6 L[5] CLD 23 MLTPL
F80-1000S-5W 12.6 L[5] CLD 23 MLTPL
F80-1000S-6W 12.6 L[5] CLD 23 MLTPL
F80-1000S-7W 12.6 L[5] CLD 23 MLTPL
F80-1200E-1W 12.6 L[5] CLD 23 MLTPL
F80-1200E-2W 12.6 L[5] CLD 23 MLTPL
F80-1200E-3W 12.6 L[5] CLD 23 MLTPL
F80-1200E-4W 12.6 L[5] CLD 23 MLTPL
F80-1200E-5W 12.6 L[5] CLD 23 MLTPL
F80-1200E-6W 12.6 L[5] CLD 23 MLTPL
F80-1200E-7W 12.6 L[5] CLD 23 MLTPL
F80-1200S-1W 12.6 L[5] CLD 23 MLTPL
F80-1200S-2W 12.6 L[5] CLD 23 MLTPL
F80-1200S-3W 12.6 L[5] CLD 23 MLTPL
F80-1200S-4W 12.6 L[5] CLD 23 MLTPL
F80-1200S-5W 12.6 L[5] CLD 23 MLTPL
F80-1200S-6W 12.6 L[5] CLD 23 MLTPL
F80-1200S-7W 12.6 L[5] CLD 23 MLTPL
F80-300E-1W 12.6 L[5] CLD 23 MLTPL
F80-300E-2W 12.6 L[5] CLD 23 MLTPL
F80-300E-3W 12.6 L[5] CLD 23 MLTPL
F80-300E-4W 12.6 L[5] CLD 23 MLTPL
F80-300E-5W 12.6 L[5] CLD 23 MLTPL
F80-300E-6W 12.6 L[5] CLD 23 MLTPL
F80-300E-7W 12.6 L[5] CLD 23 MLTPL
F80-300S-1W 12.6 L[5] CLD 23 MLTPL
F80-300S-2W 12.6 L[5] CLD 23 MLTPL
F80-300S-3W 12.6 L[5] CLD 23 MLTPL
F80-300S-4W 12.6 L[5] CLD 23 MLTPL
F80-300S-5W 12.6 L[5] CLD 23 MLTPL
F80-300S-6W 12.6 L[5] CLD 23 MLTPL
F80-300S-7W 12.6 L[5] CLD 23 MLTPL
F80-450E-1W 12.6 L[5] CLD 23 MLTPL
F80-450E-2W 12.6 L[5] CLD 23 MLTPL
F80-450E-3W 12.6 L[5] CLD 23 MLTPL
F80-450E-4W 12.6 L[5] CLD 23 MLTPL
F80-450E-5W 12.6 L[5] CLD 23 MLTPL
F80-450E-6W 12.6 L[5] CLD 23 MLTPL
F80-450E-7W 12.6 L[5] CLD 23 MLTPL
F80-450S-1W 12.6 L[5] CLD 23 MLTPL
F80-450S-2W 12.6 L[5] CLD 23 MLTPL
F80-450S-3W 12.6 L[5] CLD 23 MLTPL
F80-450S-4W 12.6 L[5] CLD 23 MLTPL
F80-450S-5W 12.6 L[5] CLD 23 MLTPL
F80-450S-6W 12.6 L[5] CLD 23 MLTPL
F80-600E-1W 12.6 L[5] CLD 23 MLTPL
F80-600E-2W 12.6 L[5] CLD 23 MLTPL
F80-600E-3W 12.6 L[5] CLD 23 MLTPL
F80-600E-4W 12.6 L[5] CLD 23 MLTPL
F80-600E-5W 12.6 L[5] CLD 23 MLTPL
F80-600E-6W 12.6 L[5] CLD 23 MLTPL
F80-600E-7W 12.6 L[5] CLD 23 MLTPL
F80-600S-1W 12.6 L[5] CLD 23 MLTPL
F80-600S-2W 12.6 L[5] CLD 23 MLTPL
F80-600S-3W 12.6 L[5] CLD 23 MLTPL
F80-600S-4W 12.6 L[5] CLD 23 MLTPL
F80-600S-5W 12.6 L[5] CLD 23 MLTPL
F80-600S-6W 12.6 L[5] CLD 23 MLTPL
F80-600S-7W 12.6 L[5] CLD 23 MLTPL
MFA20E 6.4 L[6] CLD 23 MLTPL
MFA20S-10 6.4 L[6] CLD 23 MLTPL
MFA40E 6.4 L[6] CLD 23 MLTPL
MFA40S-10 6.4 L[6] CLD 23 MLTPL
MFA60E 6.4 L[6] CLD 23 MLTPL
MFA60S-10 6.4 L[6] CLD 23 MLTPL
MFT20E 6.4 L[6] CLD 23 MLTPL
MFT20S-10 6.4 L[6] CLD 23 MLTPL
MFT40E 6.4 L[6] CLD 23 MLTPL
MFT40S-10 6.4 L[6] CLD 23 MLTPL
MFT60E 6.4 L[6] CLD 23 MLTPL
MFT60S-10 6.4 L[6] CLD 23 MLTPL

[1] Only products bearing the NSF Mark on the product, product packaging, and/or
    documentation shipped with the product are Certified.
[2] Certified for use in municipal water treatment plants only.
[3] Certified for a minimum daily flow of 200 liters per day.
[4] Certified for a minimum daily flow of 500 liters per day.
[5] Certified for a minimum daily flow of 7,000 liters per day.
[6] Certified for a minimum daily flow of 30,000 liters per day.



 
Burkert SAS 
Rue du Giessen
Triembach au val 67220 
France 
33 3 88589100
Visit this company's website


Facility : Burkert SAS, Italy

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Water Meters
S054-(v)-16,40-FW..-(x)-(u)-(w)-(y-y)-(z) * JW..[1] 1/2" - 16" D. HOT MLTPL

[1] (u) - Lining material
          PP - Polypropylene
          PT - PTFE
          EN - Ebonite
    (v) - Diameter nominal (DN)
          25  - 1"
          32  - 1 1/4"
          40  - 1 1/2"
          50  - 2"
          65  - 2 1/2"
          80  - 3"
          100 - 4"
          125 - 5"
          150 - 6"
          200 - 8"
          250 - 10"
          300 - 12"
          350 - 14"
          400 - 16"
    (w) - Gasket material
         00 - No O-Ring (for PTFE & Ebonite lining only)
         FF - FKM O-Ring (for PP lining only)
    (x) - Body material (ST,VH,VC)
    (y-y) Number and electrode material
    2-VH : 2 measure electrodes in AISI 316
    3-VH : 2 measure + 1 ground electrodes in AISI 316
    (z) - Execution and Protection Rate 
          1 - Remote 
          3 - Compact
    (x) and (z) are non-wetted components.
    16,40 is the pressure rate: no influence on the wetted components
    JW.. is the lenght of the cable: no influence on the wetted components
[2] (t) - Lining material
          PP - Polypropylene
          PT - PTFE
          EN - Ebonite
    (u) - Diameter Nominal (DN)
          25  - 1"
          32  - 1 1/4"
          40  - 1 1/2"
          50  - 2"
          65  - 2 1/2"
          80  - 3"
          100 - 4"
          125 - 5"
          150 - 6"
          200 - 8"
          250 - 10"
          300 - 12"
          350 - 14"
          400 - 16"
          450 - 18"
          500 - 20"
          550 - 22"
          600 - 24"
          650 - 26"
          700 - 28" 
          750 - 30"
          800 - 32"
          850 - 34"
          900 - 26"
          1000 - 40"
          1200 - 48"
          1400 - 56" 
          1600 - 62"
          1800 - 70"
          2000 - 78"
    (v) - Gasket material
          00 - No O-Ring (for PTFE & Ebonite lining only)
          FF - FKM O-Ring (for PP lining only)
    (w) - Flange type (FA-FD-FJ)
    (x) - Body material (ST,VH,VC)
    (y-y) Number and electrode material
    2-VH : 2 measure electrodes in AISI 316
    3-VH : 2 measure + 1 ground electrodes in AISI 316
    (z) - Execution and Protection Rate 
          1 - Remote 
          3 - Compact
    10, 16, 25, 40, 64 is the pressure rate: no influence on the wetted components
    JW.. is the lenght of the cable: no influence on the wetted components



 
BWT AG 
Walter Simmer Str. 4
Mondsee 5310 
Austria 
43 6232 50110
Visit this company's website


Facility : # 1 Italy

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Reverse Osmosis Element[1]
PERMAQ1-4014 HF[2] [4] 4" x 14" CLD 23 MLTPL
PERMAQ1-4018 HF[2] [3] 4" x 18" CLD 23 MLTPL
PERMAQ1-4018 S HF[2] [3] 4" x 18" CLD 23 MLTPL
PERMAQ1-4021 HF[5] 4" x 21" CLD 23 MLTPL
PERMAQ1-4021 S HF[2] [3] 4" x 21" CLD 23 MLTPL
PERMAQ1-4029 S HF[5] 4" x 29" CLD 23 MLTPL
PERMAQ1-4040 HF[5] 4" x 40" CLD 23 MLTPL
PERMAQ1-4040 S HF[5] 4" x 40" CLD 23 MLTPL
PERMAQ1-8040 HF[2] [4] 8" x 40" CLD 23 MLTPL
PERMAQ2-4014 HF[2] [4] 4" x 14" CLD 23 MLTPL
PERMAQ2-4018 HF[2] [3] 4" x 18" CLD 23 MLTPL
PERMAQ2-4018 S HF[2] [3] 4" x 18" CLD 23 MLTPL
PERMAQ2-4021 HF[5] 4" x 21" CLD 23 MLTPL
PERMAQ2-4021 S HF[2] [3] 4" x 21" CLD 23 MLTPL
PERMAQ2-4029 S HF[5] 4" x 29" CLD 23 MLTPL
PERMAQ2-4040 HF[5] 4" x 40" CLD 23 MLTPL
PERMAQ2-4040 S HF[5] 4" x 40" CLD 23 MLTPL
PERMAQ2-8040 HF[2] [3] 8" x 40" CLD 23 MLTPL
PERMAQ2R-4040 S HF[2] [3] 4" x 40" CLD 23 MLTPL
PERMAQ2R-8040 HF[5] 8" x 40" CLD 23 MLTPL
PERMAQ3-4014 HF[2] [4] 4" x 14" CLD 23 MLTPL
PERMAQ3-4018 HF[2] [3] 4" x 18" CLD 23 MLTPL
PERMAQ3-4021 HF[2] [3] 4" x 21" CLD 23 MLTPL
PERMAQ3-4040 HF[2] [3] 4" x 40" CLD 23 MLTPL
PERMAQ4-4014 HF[2] [4] 4" x 14" CLD 23 MLTPL
PERMAQ4-4018 HF[2] [3] 4" x 18" CLD 23 MLTPL
PERMAQ4-4021 HF[2] [3] 4" x 21" CLD 23 MLTPL
PERMAQ4-4029 HF[2] [3] 4" x 29" CLD 23 MLTPL
PERMAQ4-4040 HF[2] [3] 4" x 40" CLD 23 MLTPL
PERMAQ4-4040 S HF[2] [3] 4" x 40" CLD 23 MLTPL
PERMAQ4-8040 HF[2] [4] 8" x 40" CLD 23 MLTPL

[1] Sizes indicated are expressed as diameter x length.
[2] Certified for a minimum permeate (product water) flow of 1,191 L/day.
[3] Certified elements must be flushed of preservative in the field for a minimum of 2 hours
    at the following parameters:
    PERMAQ5-4014, 1000 l/h at 225 psi
    PERMAQ5-4021, 1000 l/h at 225 psi
    PERMAQ5-4641, 1500 l/h at 225 psi
    PERMAQ6-4040, 1000 l/h at 225 psi
    PERMAQ1-4018 HF, 1000 l/h at 150psi
    PERMAQ1-4018 S , 1000 l/h at 150 psi
    PERMAQ1-4018 S HF, 1000 l/h at 150 psi
    PERMAQ1-4021 S, 1000 l/h at 150 psi
    PERMAQ1-4021 S HF, 1000 l/h at 150 psi
    PERMAQ1-4040, 1000 l/h at 150 psi
    PERMAQ1-4611, 1000 l/h at 150 psi
    PERMAQ1-8040, 1500 l/h at 150 psi
    PERMAQ1-8040 W, 1500 l/h at 150 psi
    PERMAQ2R-4040 W, 1500 l/h at 150 psi
    PERMAQ2-4018 S, 1000 l/h at 150 psi
    PERMAQ2-4018 HF, 1000 l/h at 150 psi
    PERMAQ2-4018 S HF, 1000 l/h at 150 psi
    PERMAQ2-4021 S, 1000 l/h at 150 psi
    PERMAQ2-4021 S HF, 1000 l/h at 150 psi
    PERMAQ2-4040, 1000 l/h at 150 psi
    PERMAQ2R-4040, 1000 l/h at 150 psi
    PERMAQ2R-4040 S HF, 1500 l/h at 150 psi
    PERMAQ2-8040 W, 1000 l/h at 150 psi
    PERMAQ2-8040 HF, 1000 l/h at 150 psi
    PERMAQ3-4018, 1000 l/h at 150 psi
    PERMAQ3-4018 HF, 1000 l/h at 150 psi
    PERMAQ3-4021, 1000 l/h at 150 psi
    PERMAQ3-4021 HF, 1000 l/h at 150 psi
    PERMAQ3-4040, 1000 l/h at 150 psi
    PERMAQ3-4040 HF, 1000 l/h at 150 psi
    PERMAQ3-4611, 1000 l/h at 150 psi
    PERMAQ3-4641, 1500 l/h at 150 psi
    PERMAQ3-8040, 1500 l/h at 150 psi
    PERMAQ4-4021, 1000 l/h at 100 psi
    PERMAQ4-4018 HF, 1000 l/h at 100 psi
    PERMAQ4-4029 HF, 1000 l/h at 100 psi
    PERMAQ4-4021 HF, 1000 l/h at 100 psi
    PERMAQ4-4040 HF, 1000 l/h at 100 psi
    PERMAQ4-4040, 1000 l/h at 100 psi
    PERMAQ4-4040 S HF, 1000 l/h at 100 psi
    PERMAQ4-4040 W, 1000 l/h at 100 psi
    PERMAQ4-8040 W, 1000 l/h at 100 psi
    PERMAQ7-4021, 1500 l/h at 500 psi
    PERMAQ7-4040, 1500 l/h at 500 psi
    PERMAQ8-4021, 1500 l/h at 500 psi
    PERMAQ8-4040, 1500 l/h at 500 psi
    PERMAQ8-8040, 15000 l/h at 500 psi
[4] Certified elements must be flushed of preservative in the field for a minimum of 1 hour
    at the following parameters:
    PERMAQ1-4014 HF, 12,610 l/h at 150 psi
    PERMAQ1-4018 , 13,890 l/h at 150 psi
    PERMAQ2-4014 HF, 9745 l/h at 150 psi
    PERMAQ2-4018, 12,610 l/h at 150 psi
    PERMAQ3-4014 HF, 14,725 l/h at 150 psi
    PERMAQ4-4014 HF, 12,610 l/h at 100 psi
    PERMAQ4-4018 , 13,890 l/h at 100 psi
    PERMAQ2R-8040, 9745 l/h at 150 psi
    PERMAQ2-8040, 9745 l/h at 150 psi
    PERMAQ2-4611, 12,610 l/h at 150 psi
    PERMAQ5-8040 -2, 10,530 l/hr at 225 psi
    PERMAQ5-8040 -3, 11,555 l/hr at 225 psi
    PERMAQ1-8040 HF, 12,000 l/ hr at 150 psi
    PERMAQ2-4641, 12,000 l/h at 100 psi
    PERMAQ4-8040 HF, 12,000 l/h at 100 psi
[5] All models are certified to a minimum daily flow of 1,737 liters per day. All models
    must be flushed of preservative in the field for a minimum of 2 hours at a flow rate of
    1,000 l/h at 150 psi.

NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
      documentation shipped with the product are Certified.


 
CAM Valves and Automation, LLC dba Pratt Industrial 
3700 Oakes Drive
Suite B 
Emporia, KS 66801 
United States 
620-208-8100
Visit this company's website


Facility : # 1 China

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Valves[1]
BF-8668 2"-48" CLD 23 MLTPL
BF-8688 2"-48" CLD 23 MLTPL
BF-8768 2"-48" CLD 23 MLTPL
BF-8788 2"-48" CLD 23 MLTPL
BF-8868 2"-48" CLD 23 MLTPL
BF-8888 2"-48" CLD 23 MLTPL

[1] Certified for equivalent metric sizes.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



 
Canature Health Technology Group Co., Ltd. 
No. 508 & 518, Chuanda Road
Pudong New Area 
Shanghai, 201200 
China 
86 21 5859 9999
Visit this company's website


Facility : Shanghai, China

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Reverse Osmosis Element[1] [2] [3]
BW-4040FR 4" x 40" CLD 23 MLTPL
BW-8040FR 8" x 40" CLD 23 MLTPL

[1] Naming convention is as follows:
    TW  - Tap Water
    BW  - Brackish Water
    SW  - Seawater Desalination
    LP  - Low Pressure
    ULP - Ultra Low Pressure
    XLP - Extremely Low Pressure
[2] Certified for the following minimum daily flow rates:
    2.5 x 21 inch models are certified for a minimum daily flow of 300 gallons per day.
    2.5 x 40 inch models are certified for a minimum daily flow of 750 gallons per day.
    4 x 21 inch models are certified for a minimum daily flow of 950 gallons per day.
    4 x 40 inch models are certified for a minimum daily flow of 2,400 gallons per day.
    TW-8040XLP is certified for a minimum daily flow of 9,000 gallons per day. All other 8 x
    40 inch models are certified for a minimum daily flow of
    10,500 gallons per day.
[3] Flush continuously with DI water at 6 gpm for 4 hours, soak for 2 hours, then begin
    exposure.



 
Canature Health Technology Group Co., Ltd. 
No. 518, Chuanda Road
Pudong New Area 
Shanghai, 201200 
China 
86 21 5859 9999


Facility : Jiangsu, China

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Components, POE: Tanks, Water Softener
Pressure Vessel >= 83.5 gal. CLD 23 MLTPL
Pressure Vessel-H >= 83.5 gal. CLD 23 MLTPL



 
Canature HuaYu Environmental Products Co., Ltd. 
No.8 West Honggao Road
Yixing, Jiangsu Province 214214 
China 
86 510 8783 5768


Facility : Jiangsu, China

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Components, POE: Tanks, Water Softener
FRP Tank HY-H Series >= 83.5 gal. CLD 23 MLTPL
FRP Tank HY-S Series >= 6.3 L CLD 23 MLTPL
FRP Tank HY-Series >= 83.5 gal. CLD 23 MLTPL



 
Canature HuaYu Environmental Products Co., Ltd. 
Industrial Area, North Gaocheng Town
Yixing, Jiangsu Province 214214 
China 
86 510 8789 4646


Facility : Shanghai, China

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Reverse Osmosis Element[1] [2] [3]
HY-BW-4040FR 4" x 40" CLD 23 MLTPL
HY-BW-8040FR 8" x 40" CLD 23 MLTPL

[1] Naming convention is as follows:
    TW  - Tap Water
    BW  - Brackish Water
    SW  - Seawater Desalination
    LP  - Low Pressure
    ULP - Ultra Low Pressure
    XLP - Extremely Low Pressure
[2] Certified for the following minimum daily flow rates:		
    2.5 x 21 inch models are certified for a minimum daily flow of 300 gallons per day.		
    2.5 x 40 inch models are certified for a minimum daily flow of 750 gallons per day.		
    4 x 21 inch models are certified for a minimum daily flow of 950 gallons per day.		
    4 x 40 inch models are certified for a minimum daily flow of 2,400 gallons per day.		
    HY-TW-8040XLP is certified for a minimum daily flow of 9,000 gallons per day. 
    All other 8 x 40 inch models are certified for a minimum daily flow of 10,500 gallons
    per day.
[3] Flush continuously with DI water at 6 gpm for 4 hours, soak for 2 hours, then begin
    exposure.



 
CDC Pneumatics Co. 
30, Secheon-ro 1-gil, Dasa-eup
Dalseong-gun, Daegu 42921 
Republic of Korea 
82 53 354 7501
Visit this company's website


Facility : Daegu, Korea, Republic of

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Valves [G]
HTVF 1/2-N02[1] 1/2" x 1/4" D. HOT MLTPL
HTVF 3/8-N02[1] 3/8" x 1/4" D. HOT MLTPL
HTVF 5/8-N06[1] 5/8" x 3/4" D. HOT MLTPL

[1] Models may be followed by suffix for color:
        B - Black
        G - Gray
        W - Natural (white)
       TW - True White
[2] Models may be followed by suffix for color:
    TW - True White
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



 
Cembrane A/S 
Nøglegårdsvej 10
Lynge 3540 
Denmark 
45 2 148 4321
Visit this company's website


Facility : Texas, USA

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Filtration Devices/Components[1] [2] [3]
SiC BLOX FX Series N/A D. HOT MLTPL

[1] The SiC BLOX FX series stack is certified for a minimum daily permeate flow of 10,000
    liters per day per module, up to ten (10) modules.
[2] The SiC BLOX FX series stack requires a 10.5 gallons per minute (gpm) flush per module
    up to ten (10) for for five minutes with de-ionized water before use.
[3] The SiC BLOX FX series is certified for municipal treatment facilities end use.



Facility : Lynge, Denmark

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Filtration Devices/Components[1] [2] [3]
SiC BLOX FX Series N/A D. HOT MLTPL

[1] The SiC BLOX FX series stack is certified for a minimum daily permeate flow of 10,000
    liters per day per module, up to ten (10) modules.
[2] The SiC BLOX FX series stack requires a 10.5 gallons per minute (gpm) flush per module
    up to ten (10) for for five minutes with de-ionized water before use.
[3] The SiC BLOX FX series is certified for municipal treatment facilities end use.



 
CEPEX, S.A.U. 
Av. Ramon Ciurans, 40 (Parcella 6)
Poligono Industrial Congost 
08530 La Garriga 
Spain 
34 93 870 42 08
Visit this company's website


Facility : La Garriga, Spain

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Valves
CEPEX Butterfly Valve, PVC, Grey 3", 4", 6", 8" CLD 23 MLTPL
CEPEX Check Valve, Wafer Swing,PVC, with mounting kit 3", 4", 6", 8" CLD 23 MLTPL
JANDY Butterfly Valve, PVC, Grey 3", 4", 6", 8" CLD 23 MLTPL
JANDY Check Valve, Wafer Swing,PVC, with mounting kit 3", 4", 6", 8" CLD 23 MLTPL
JFKBVL3. 3""ANSI FLANGE KIT 3" CLD 23 MLTPL
JFKBVL4. 4"ANSI FLANGE KIT 4" CLD 23 MLTPL
JFKBVL6. 6"ANSI FLANGE KIT 6" CLD 23 MLTPL
JFKBVL8. 8"ANSI FLANGE KIT 8" CLD 23 MLTPL
JFKHL3. 3"ANSI FLANGE KIT 3" CLD 23 MLTPL
JFKHL4. 4"ANSI FLANGE KIT 4" CLD 23 MLTPL
JFKHL6-N. 6"ANSI FLANGE KIT FOR JCP W/O STRAINER 6" CLD 23 MLTPL
JFKHL6-S. 6"ANSI FLANGE KIT FOR JCP W/ STRAINER 6" CLD 23 MLTPL

NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
      documentation shipped with the product are Certified.


 
CERAFILTEC Germany GmbH 
Quellenstr. 14
Saarbrücken 
66121  
Germany 
49 681 93587 089


Facility : Saarbruecken, Germany

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Filtration Devices / Components
CFT 0000-BS0006-0000 [1] D. HOT MLTPL
CFT-0000-BMSEC4-2022 [1] D. HOT MLTPL
CFT-0000-BMSEC6-1016 [1] D. HOT MLTPL
CFT-0000-BMSEC6-1019 [1] D. HOT MLTPL
CFT-0000-BMSEC6-2019 [1] D. HOT MLTPL
CFT-0000-BMSEC6-2022 [1] D. HOT MLTPL
CFT-0000-HS0006-0000 [1] D. HOT MLTPL
CFT-0000-SC0EC4-2022 [1] D. HOT MLTPL
CFT-0000-SC0EC6-1016 [1] D. HOT MLTPL
CFT-0000-SC0EC6-1019 [1] D. HOT MLTPL
CFT-0000-SC0EC6-2019 [1] D. HOT MLTPL
CFT-0000-SC0EC6-2022 [1] D. HOT MLTPL
CFT-0000-SMSEC4-2022 [1] D. HOT MLTPL
CFT-0000-SMSEC6-1016 [1] D. HOT MLTPL
CFT-0000-SMSEC6-1019 [1] D. HOT MLTPL
CFT-0000-SMSEC6-2019 [1] D. HOT MLTPL
CFT-0000-SMSEC6-2022 [1] D. HOT MLTPL

[1] Following models are certified for a minimum flow of 14,000 liters per day and requires
    a 10 liters per minute flush for ten (10) minutes with tap water before use:   
    
    CFT-0000-SMSEC6-2019 
    CFT-0000-BMSEC6-2019
    CFT-0000-SMSEC4-2022
    CFT-0000-BMSEC4-2022
    CFT-0000-SMSEC6-1016
    CFT-0000-BMSEC6-1016
    CFT-0000-SMSEC6-1019
    CFT-0000-BMSEC6-1019
    CFT-0000-HS0006-0000 
    CFT 0000-BS0006-0000
    
    CFT-0000-SC0EC6-1016, CFT-0000-SC0EC6-1019, CFT-0000-SC0EC6-2019, CFT-0000-SC0EC4-2022
    are certified for a minimum flow of 348 liters per day.
    
    The Ceramic Plate CFT-0000-SC0EC6-1016, CFT-0000-SC0EC6-1019, CFT-0000-SC0EC6-2019,
    CFT-0000-SC0EC4-2022 require a 0.5 liters per minute flush for ten (10) minutes with tap
    water before use.
    
    CFT-0000-HS0006-0000 and CFT 0000-BS0006-0000 are to be used with CFT-0000-SMSEC6-2019,
    CFT-0000-BMSEC6-2019, CFT-0000-SMSEC4-2022, CFT-0000-BMSEC4-2022, CFT-0000-SMSEC6-1016,
    CFT-0000-BMSEC6-1016, CFT-0000-SMSEC6-1019, and CFT-0000-BMSEC6-1019. 
    
    CFT-0000-SC0EC6-1016 are to be used with CFT-0000-SMSEC6-1016, CFT-0000-BMSEC6-1016
    only.
    CFT-0000-SC0EC6-1019 are to be used with CFT-0000-SMSEC6-1019, CFT-0000-BMSEC6-1019
    only.
    CFT-0000-SC0EC6-2019 are to be used with CFT-0000-SMSEC6-2019, CFT-0000-BMSEC6-2019
    only.
    CFT-0000-SC0EC4-2022 are to be used with CFT-0000-SMSEC4-2022, CFT-0000-BMSEC4-2022
    only.
    
    Certified for use with a 384 L tank or greater.



 
Changhua (Nanjing) Industrial Water Treatment Co., Ltd. 
Building 11, No. 19
Aitao Road, Jiangning District 
Nanjing City, Jiangsu 211106 
China 
86 258 616 2788
Visit this company's website


Facility : Pingtung, Taiwan

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Valves [G]
Cartridge Replacements CPVC/FKM BV[TT]104CR[1] 1/2" - 4" CLD 23 MLTPL
Catridges PVC/FKM BV[WW]102CR[2] 1/2" - 4" CLD 23 MLTPL
Super C Compact Ball Valve CPVC/FKM BV[XX][UUU]N[1] 1/2" - 2" CLD 23 MLTPL
Super C Compact Ball Valve PVC/FKM BV[XX][UUU]N[2] 1/2" - 2" CLD 23 MLTPL
True Union Ball Valve (TUBV) CPVC/FKM BVV[YY][ZZ]4N[1] 3" - 4" CLD 23 MLTPL
True Union Ball Valve (TUBV) CPVC/FKM BV[XX][WW]4N[1] 1/2" - 2" CLD 23 MLTPL
True Union Ball Valve (TUBV) PVC/FKM BV[XX][TT]2N[2] 1/2" - 2" CLD 23 MLTPL
True Union Ball Valve (TUBV) PVC/FKM BV[YY][ZZ]2N[2] 3" - 4" CLD 23 MLTPL

[1] [XX]  Size
          07 - 1/2"
          08 - 3/4"
          10 - 1"
          14 - 1 1/4"
          17 - 1 1/2"
          20 - 2"
    [WW]  End connections
          10 - Socket or Threaded
          12 - Flanged
    [YY]  Size
          30 - 3"
          40 - 4"
    [ZZ]  End connections
          10 - Socket
          11 - Threaded
          12 - Flanged
    [TT]  Size
          07 - 1/2"
          08 - 3/4"
          10 - 1"
          14 - 1 1/4"
          17 - 1 1/2"
          20 - 2"
          30 - 3"
          40 - 4"
    [UUU] End Connections
          193 - CPVC/EPDM SOC x SOC
          203 - CPVC/EPDM T x T
          194 - CPVC/FKM SOC x SOC
          204 - CPVC/FKM T x T
[2] [XX]  Size
          07 - 1/2"
          08 - 3/4"
          10 - 1"
          14 - 1 1/4"
          17 - 1 1/2"
          20 - 2"
    [TT]  End Connection
          10 - Socket or Threaded
          12 - Flanged
    [YY]  Size
          30 - 3"
          40 - 4"
    [ZZ]  End connection
          10 - Socket
          11 - Threaded
          12 - Flanged
    [WW]  Size
          07 - 1/2"
          08 - 3/4"
          10 - 1"
          14 - 1 1/4"
          17 - 1 1/2"
          20 - 2"
          30 - 3"
          40 - 4"
    [UUU] End connections
          191 - PVC/EPDM SOC x SOC
          201 - PVC/EPDM T x T
          192 - PVC/FKM SOC x SOC
          202 - PVC/FKM T x T
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



 
Charlatte Reservoirs 
17, Rue Paul-Bert.
89400 Migennes 
France 
33 3 8692 3012


Facility : Migennes, France

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Pressurized Water Storage Tanks
Hydrofort 25 - 40,000 gal. D. HOT[1] MLTPL

[1] D. HOT - Tested at 60 °C (140 °F)



 
Clack Corporation 
4462 Duraform Lane
Windsor, WI 53598-9716 
United States 
608-846-3010


Facility : Windsor, WI

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Miscellaneous Treatment Devices/Components [G]
1" & 1.25" Motorized Alternating Valve - V3069FF-01[1] .28 L CLD 23 MLTPL
1" & 1.25" No Hard Water Bypass Valve - V3070FF[1] .42 L CLD 23 MLTPL
1" & 1.25" No Hard Water Bypass Valve - V3070FM[1] .42 L CLD 23 MLTPL
1" Brass Press/Sweat Assembly LF - V3007-22LF[1] .04 L CLD 23 MLTPL
1" Brass Sweat Assembly LF - V3007-02LF[1] .05 L CLD 23 MLTPL
1" Sharkbite® Assembly - V3007-13LF[1] .08 L CLD 23 MLTPL
1" Twin Control Valve - TT1XX - VTT1AABCD-EFFGG[1] [3] 2.06 L CLD 23 MLTPL
1'' Control Valve - WS1XX - V1AABCD-EFFGG[1] [3] .51 L CLD 23 MLTPL
1.25" Brass Sweat Assembly LF - V3007-09LF[1] .04 L CLD 23 MLTPL
1.25" Control Valve - WS125XX - V125AABCD-EFFGG[1] [3] .69 L CLD 23 MLTPL
1.5" BACK PLASTIC CONTROL VALVES - VB15AABCD-EFFGG[4] [5] 1.27 L CLD 23 MLTPL
1.5" Brass Sweat Assembly LF - V3007-09LF[1] .08 L CLD 23 MLTPL
1.5" Control Valve - WS15XX - V15AABCD-EFFGG[5] [6] 1.08 L CLD 23 MLTPL
1.5" PLASTIC FTG ASY BYPASS VERT ADAPT - V4430-14[4] .16 L CLD 23 MLTPL
1.5" PLASTIC FTG ASY QC TO BSPT SS - V4430-12[4] .09 L CLD 23 MLTPL
1.5" PLASTIC FTG ASY QC TO NPT SS - V4430-11[4] .09 L CLD 23 MLTPL
1.5" Plastic Control Valve - WS15P XX - VP15AABCD-EFFGG[4] [5] 1.09 L CLD 23 MLTPL
1.5" Plastic FTG ASY QC TO BSPT - V4430-02[4] .09 L CLD 23 MLTPL
1.5" Plastic FTG ASY QC TO NPT - V4430-01[4] .09 L CLD 23 MLTPL
1.5" Plastic FTG ASY QC TO QC - V4430-03[4] .09 L CLD 23 MLTPL
1.5" Plastic FTG ASY QC to BSPT Elbow - V4430-08[4] .12 L CLD 23 MLTPL
1.5" Plastic FTG ASY QC to NPT Elbow - V4430-07[4] .12 L CLD 23 MLTPL
1.5" Plastic FTG ASY QC to QC Elbow - V4430-09[4] .14 L CLD 23 MLTPL
1.5" Plastic FTG ASY QC to Solvent - V4430-13[4] .14 L CLD 23 MLTPL
1.5" Plastic METER ASY BSPT 15FT - V3045BSPT-15[4] .13 L CLD 23 MLTPL
1.5" Plastic METER ASY NPT 15FT - V3045-15[4] .13 L CLD 23 MLTPL
1.5" Plastic METER ASY QC TO QC 15FT - V3045QC-15[4] .13 L CLD 23 MLTPL
1.5" TWIN CONTROL VALVES - VT15AABCD-EFFGG[7] 4.59 L CLD 23 MLTPL
1190FP In-Out Head w/ Fill Port - D1220-01[1] .48 L CLD 23 MLTPL
2" Control Valve - WS2XX - V2AABCD-EFFGG[6] [10] 2.04 L CLD 23 MLTPL
2" HF Control Valve - WS2HF - V2HFABC-DD[11] [12] 3.52 L CLD 23 MLTPL
2" PLASTIC FTG ASY QC TO BSPT SS - V4460-12 .19 L CLD 23 MLTPL
2" PLASTIC FTG ASY QC TO NPT SS - V4460-11 .19 L CLD 23 MLTPL
2" Plastic Control Valve - WS2P XX - VP2AABCD-EFFGG[6] [10] 2.12 L CLD 23 MLTPL
2" Plastic FTG ASY QC TO BSPT - V4460-02[6] .19 L CLD 23 MLTPL
2" Plastic FTG ASY QC TO NPT - V4460-01[6] .19 L CLD 23 MLTPL
2" Plastic FTG ASY QC TO QC - V4460-03[6] .24 L CLD 23 MLTPL
2" Plastic FTG ASY QC to BSPT Elbow - V4460-05[6] .32 L CLD 23 MLTPL
2" Plastic FTG ASY QC to NPT Elbow - V4460-04[6] .32 L CLD 23 MLTPL
2" Plastic FTG ASY QC to QC Elbow - V4460-06[6] .35 L CLD 23 MLTPL
2" Plastic FTG ASY QC to Solvent - V4460-13[6] .28 L CLD 23 MLTPL
2" Plastic METER ASY BSPT 15FT - V3048BSPT-15[6] .31 L CLD 23 MLTPL
2" Plastic METER ASY NPT 15FT - V3048-15[6] .31 L CLD 23 MLTPL
2" Plastic METER ASY QC TO QC 15FT - V3048QC-15[6] .31 L CLD 23 MLTPL
2" Quick Connect Control Valve - WS2XX - V2AABCD-EFFGG[5] [6] 2.04 L CLD 23 MLTPL
2” QC & 2H 6" FLANGE BASE Assembly - V3055[6] 1 L CLD 23 MLTPL
3/4" Brass Sweat Assembly LF - V3007-03LF[1] .01 L CLD 23 MLTPL
3/4" Sharkbite® Assembly - V3007-12LF[1] .05 L CLD 23 MLTPL
6" Flange Base Assembly - V3090[1] .66 L CLD 23 MLTPL
ADAPTER FLANGE 6X3X3 - D1502 0 L CLD 23 MLTPL
ADAPTER FLANGE 6x4 - D1504 0 L CLD 23 MLTPL
Break Away Fitting Kit - V3007-21 0.16L CLD 23 MLTPL
CLOSURE 6 FLANGE – D1503 0 L CLD 23 MLTPL
FITTING 2.5-8 - D1285[1] .11 L CLD 23 MLTPL
Inline Adapter Fitting - V3467[1] .13 L CLD 23 MLTPL
TOP DIFFUSER 1.050 WATER RIGHT - D1249WR[1] 0 L CLD 23 MLTPL

[1] Certified for use with tanks 9 x 48 and greater.
[2] V3006-XX where XX may be 01, 02 or 04.  Indicates handle color, handle direction or
    packaging.
[3] V1AABCD-EFFGG, VTT1AABCD-EFFGG, and V125AABCD-EFFGG where:
    AA - May be blank or any two digit letter code.
    B  - May be D (downflow), U (upflow), or B (backwash only).
    C  - May be M (meter) or T (timer).
    D  - May be A, A2, A3, B, C, D, E, F, G, H, I, J, K, or Z to indicate the injector
    installed.
    E  - May be blank or any letter code.  If E or M then it includes a mixing valve.
    FF - May be any number from 01 to 99.  Indicates packaging or base variations.
    GG - May be any two digit combination of letters.  If blank, cover is black or if filled
    in indicates colored covers or special labels on the cover.
[4] Certified for use with tanks 10 x 54 and greater.
[5] V15AABCD-EFFGG, VP15AABCD-EFFGG and VB15AABCD-EFFGG where:
    AA - May be blank or any two digit letter code.
    B  - May be D (downflow), U (upflow), or B (backwash only).
    C  - May be M (meter) or T (timer).
    D  - May be B, C, D, E, F, G, H, I, or Z to indicate the injector installed.
    E  - May be blank or any letter code.  If E or M then it includes a mixing valve.
    FF - May be any number from 01 to 99.  Indicates packaging or base variations.
    GG - May be any two digit combination of letters.  If blank, cover is black or if filled
    in indicates colored covers or special labels on the cover.
[6] Certified for use with tanks 12 x 52 and greater.
[7] Certified for use with tanks 14 x 65 and greater.
[8] D1400-XX where XX may be blank, 01, 02, 03, or 04
[9] Water contact size restriction: 	
    D1400 - 0.35L	
    D1400-01 - 0.4L	
    D1400-02 - 0.4L	
    D1400-03 - 0.41L	
    D1400-04 - 0.4L	
    
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.
[10] V2AABCD-EFFGG and VP2AABCD-EFFGG where:
     AA - May be blank or any two digit letter code.
     B  - May be D (downflow), U (upflow), or B (backwash only).
     C  - May be M (meter) or T (timer).
     D  - May be A, A2, A3, B, C, D, E, F, G, R, S, T, U, or Z to indicate the injector
     installed.
     E  - May be blank or any letter code.  If E or M then it includes a mixing valve.
     FF - May be any number from 01 to 99.  Indicates packaging or base variations.GG - May
     be any two digit combination of letters.  If blank, cover is black or if filled in
     indicates colored covers or special labels on the cover.
[11] V2HABC-DD and V2HFABC-DD where:
     A  - May be D (downflow) or B (backwash only).
     B  - May be M (meter) or T (timer).
     C  - May be A, A2, A3, B, C, D, E, F, G, H or Z.  Indicates the injector installed.
     DD - May be any number from 01 to 99.  Indicates packaging or NPT or BSPT variations.
[12] Certified for use with tanks 18 x 65 and greater.
[13] V3ABC-DD where:
     A  - May be D (downflow) or B (backwash only).
     B  - May be M (meter) or T (timer).
     C  - May be A, A2, A3, B, C, D, E, F, G, or H.  Indicates the injector installed.
     DD - May be any number from 01 to 99.  Indicates packaging or NPT or BSPT variations.
[14] Certified for use with tanks 12 x 35 and greater.
[15] Certified for use with tanks 13 x 54 and greater.
[16] Certified for use with tanks 13 x 35 and greater.



 
Climetec Manufacturing Limited 
161 Milani Blvd
Woodbridge, ON L4H 4M4 
Canada 
905-660-0700
Visit this company's website


Facility : Woodbridge, Ontario, Canada

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Miscellaneous Process Devices/Components
Fan Coil Model: A-CID-X[1] .625" C. HOT MLTPL

[1] Fan Coil Model: A-CID-X:
    X  - Air flow and Capacity (X can be -3, 4, 6, 8, 10 or 12 )
    3  - 350 CFM and 0.75 Ton capacity
    4  - 450 CFM and 1 ton capacity
    6  - 650 CFM and 1.5 ton capacity
    8  - 850 CFM and 2 ton capacity
    10 - 1000 CFM and 2.5 ton capacity
    12 - 1200 CFM and 3 ton capacity



 
Clow Valve Company 
Division of McWane, Inc.
902 South Second Street 
Oskaloosa, IA 52577 
United States 
641-673-8611


Facility : Oskaloosa, IA

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Miscellaneous Process Devices/Components[1] [G]
Clow Valve Company LBI-400A Wet-Barrel Hydrant Break-Off Check Valve 6" CLD 23 MLTPL
LP619 Break Off Check Valve 6" CLD 23 MLTPL

[1] Only products bearing the NSF Mark are Certified.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

Fire Hydrants[1] [G]
Admiral[2] 4 1/2", 5 1/4" CLD 23 MLTPL
Admiral HP[2] 4 1/2", 5 1/4" CLD 23 MLTPL
Eddy Fire Hydrant No Drain[3] [4] 4 1/2", 5 1/4" CLD 23 MLTPL
Eddy Fire Hydrant With Drain[3] [4] 4 1/2", 5 1/4" CLD 23 MLTPL
Medallion Model 2545[2] 4 1/2", 5 1/4" CLD 23 MLTPL
Medallion F2545HP[2] 4 1/2", 5 1/4" CLD 23 MLTPL
Mountain[2] 4 1/2", 5 1/4" CLD 23 MLTPL
Wet Barrel Fire Hydrant, Model 2050[5] 6" CLD 23 MLTPL
Wet Barrel Fire Hydrant, Model 2060[5] 6" CLD 23 MLTPL
Wet Barrel Fire Hydrant, Model 2065[5] 6" CLD 23 MLTPL
Wet Barrel Fire Hydrant, Model 621[5] 6" CLD 23 MLTPL
Wet Barrel Fire Hydrant, Model 74[5] 6" CLD 23 MLTPL
Wet Barrel Fire Hydrant, Model 75[5] 6" CLD 23 MLTPL
Wet Barrel Fire Hydrant, Model 76[5] 6" CLD 23 MLTPL
Wet Barrel Fire Hydrant, Model 850[5] 6" CLD 23 MLTPL
Wet Barrel Fire Hydrant, Model 860[5] 6" CLD 23 MLTPL
Wet Barrel Fire Hydrant, Model 865[5] 6" CLD 23 MLTPL
Wet Barrel Fire Hydrant, Model 92[5] 6" CLD 23 MLTPL
Wet Barrel Fire Hydrant, Model 950[5] 6" CLD 23 MLTPL
Wet Barrel Fire Hydrant, Model 960[5] 6" CLD 23 MLTPL
Wet Barrel Fire Hydrant, Model 980[5] 8" CLD 23 MLTPL
Wet Barrel Fire Hydrant, Model 985[5] 8" CLD 23 MLTPL

[1] Only products bearing the NSF Mark are Certified.
[2] Tyton joint connection includes gasket. All other connection types do not include a
    gasket.
[3] Shoe inlet sizes are 4" or 6" mechanical joint (MJ) or flanged for the 4 1/2" hydrant
    and 6" mechanical joint (MJ) or flanged for the 5 1/4" hydrant.
[4] Certification does not include a flange gasket.
[5] Certification includes extensions or buries for the 74, 75, 76, 92, 621, 850, 860, 865,
    950, 960, 2050, 2060 or 2065. Certification includes the fabricated bury only for the
    980 and 985.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



 
CMF Global, Inc. 
2445 Fenton Street
Chula Vista, CA 91914 
United States 
619-869-8919
Visit this company's website


Facility : Sejong-si, Republic of Korea

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Valves[G]
AquaFuse 1/2" - 16" CLD 23 MLTPL

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



 
Colonial Engineering, Inc. 
6400 Corporate Avenue
Portage, MI 49002 
United States 
800-374-0234 
269-323-2495
Visit this company's website


Facility : Pingtung, Taiwan

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Valves [G]
Full-Block™ True Union Ball Valve (TUBV) CPVC/EPDM V[XX][WW]3N[2] 1/2" - 2" CLD 23 MLTPL
Full-Block™ True Union Ball Valve (TUBV) CPVC/EPDM V[YY][ZZ]3N[2] 3" - 4" CLD 23 MLTPL
Full-Block™ True Union Ball Valve (TUBV) CPVC/FKM V[XX][WW]4N[2] 1/2" - 2" CLD 23 MLTPL
Full-Block™ True Union Ball Valve (TUBV) CPVC/FKM V[YY][ZZ]4N[2] 3" - 4" CLD 23 MLTPL
Full-Block™ True Union Ball Valve (TUBV) PVC/EPDM V[XX][TT]1N[1] 1/2" - 2" CLD 23 MLTPL
Full-Block™ True Union Ball Valve (TUBV) PVC/EPDM V[YY][ZZ]1N[1] 3" - 4" CLD 23 MLTPL
Full-Block™ True Union Ball Valve (TUBV) PVC/FKM V[XX][TT]2N[1] 1/2" - 2" CLD 23 MLTPL
Full-Block™ True Union Ball Valve (TUBV) PVC/FKM V[YY][ZZ]2N[1] 3" - 4" CLD 23 MLTPL
Super C Compact Ball Valve CPVC/FKM V[XX][UUU]N[2] 1/2" - 2" CLD 23 MLTPL
Super C Compact Ball Valve PVC/FKM V[XX][UUU]N[1] 1/2" - 2" CLD 23 MLTPL
VCR Cartridge Replacements CPVC/FKM V[TT]104CR[2] 1/2" - 4" CLD 23 MLTPL
VCR™ Series Catridges PVC/FKM V[WW]102CR[1] 1/2" - 4" CLD 23 MLTPL

[1] [XX]  Size
          07 - 1/2"
          08 - 3/4"
          10 - 1"
          14 - 1 1/4"
          17 - 1 1/2"
          20 - 2"
    [TT]  End Connection
          10 - Socket or Threaded
          12 - Flanged
    [YY]  Size
          30 - 3"
          40 - 4"
    [ZZ]  End connection
          10 - Socket
          11 - Threaded
          12 - Flanged
    [WW]  Size
          07 - 1/2"
          08 - 3/4"
          10 - 1"
          14 - 1 1/4"
          17 - 1 1/2"
          20 - 2"
          30 - 3"
          40 - 4"
    [UUU] End connections
          191 - PVC/EPDM SOC x SOC
          201 - PVC/EPDM T x T
          192 - PVC/FKM SOC x SOC
          202 - PVC/FKM T x T
[2] [XX]  Size
          07 - 1/2"
          08 - 3/4"
          10 - 1"
          14 - 1 1/4"
          17 - 1 1/2"
          20 - 2"
    [WW]  End connections
          10 - Socket or Threaded
          12 - Flanged
    [YY]  Size
          30 - 3"
          40 - 4"
    [ZZ]  End connections
          10 - Socket
          11 - Threaded
          12 - Flanged
    [TT]  Size
          07 - 1/2"
          08 - 3/4"
          10 - 1"
          14 - 1 1/4"
          17 - 1 1/2"
          20 - 2"
          30 - 3"
          40 - 4"
    [UUU] End Connections
          193 - CPVC/EPDM SOC x SOC
          203 - CPVC/EPDM T x T
          194 - CPVC/FKM SOC x SOC
          204 - CPVC/FKM T x T
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



 
Conbraco Industries, Inc. 
1418 South Pearl Street
Pageland, SC 29728 
United States 
843-672-1617


Facility : Shandong, China

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Valves[G]
6GA-100-B1LF 3" CLD 23 MLTPL
6GA-108-B1LF 2" CLD 23 MLTPL
6GA-109-B1LF 2 1/2" CLD 23 MLTPL
6GA-10A-B1LF 4" CLD 23 MLTPL
6GA-10B-B1LF 5" CLD 23 MLTPL
6GA-10C-B1LF 6" CLD 23 MLTPL
6GA-10E-B1LF 8" CLD 23 MLTPL
6GA-10G-B1LF 10" CLD 23 MLTPL
6GA-10H-B1LF 12" CLD 23 MLTPL
6GA-10J-B1LF 14" CLD 23 MLTPL
6GA-10K-B1LF 16" CLD 23 MLTPL
6GA-10M-B1LF 18" CLD 23 MLTPL
6GA-10N-B1LF 20" CLD 23 MLTPL
6GA-10P-B1LF 24" CLD 23 MLTPL
6GA-110-B1LF 3" CLD 23 MLTPL
6GA-118-B1LF 2" CLD 23 MLTPL
6GA-119-B1LF 2 1/2" CLD 23 MLTPL
6GA-11A-B1LF 4" CLD 23 MLTPL
6GA-11B-B1LF 5" CLD 23 MLTPL
6GA-11C-B1LF 6" CLD 23 MLTPL
6GA-11E-B1LF 8" CLD 23 MLTPL
6GA-11G-B1LF 10" CLD 23 MLTPL
6GA-11H-B1LF 12" CLD 23 MLTPL
6GA-11J-B1LF 14" CLD 23 MLTPL
6GA-11K-B1LF 16" CLD 23 MLTPL
6GA-11M-B1LF 18" CLD 23 MLTPL
6GA-11N-B1LF 20" CLD 23 MLTPL
6GA-11P-B1LF 24" CLD 23 MLTPL
6GA-200-B1LF 3" CLD 23 MLTPL
6GA-208-B1LF 2" CLD 23 MLTPL
6GA-209-B1LF 2 1/2" CLD 23 MLTPL
6GA-20A-B1LF 4" CLD 23 MLTPL
6GA-20B-B1LF 5" CLD 23 MLTPL
6GA-20C-B1LF 6" CLD 23 MLTPL
6GA-20E-B1LF 8" CLD 23 MLTPL
6GA-20G-B1LF 10" CLD 23 MLTPL
6GA-20H-B1LF 12" CLD 23 MLTPL
6GA-210-B1LF 3" CLD 23 MLTPL
6GA-218-B1LF 2" CLD 23 MLTPL
6GA-219-B1LF 2 1/2" CLD 23 MLTPL
6GA-21A-B1LF 4" CLD 23 MLTPL
6GA-21B-B1LF 5" CLD 23 MLTPL
6GA-21C-B1LF 6" CLD 23 MLTPL
6GA-21E-B1LF 8" CLD 23 MLTPL
6GA-21G-B1LF 10" CLD 23 MLTPL
6GA-21H-B1LF 12" CLD 23 MLTPL
6GB-110-B1LF 3" CLD 23 MLTPL
6GB-118-B1LF 2" CLD 23 MLTPL
6GB-119-B1LF 2 1/2" CLD 23 MLTPL
6GB-11A-B1LF 4" CLD 23 MLTPL
6GB-11B-B1LF 5" CLD 23 MLTPL
6GB-11C-B1LF 6" CLD 23 MLTPL
6GB-11E-B1LF 8" CLD 23 MLTPL
6GB-11G-B1LF 10" CLD 23 MLTPL
6GB-210-B1LF 3" CLD 23 MLTPL
6GB-218-B1LF 2" CLD 23 MLTPL
6GB-219-B1LF 2 1/2" CLD 23 MLTPL
6GB-21A-B1LF 4" CLD 23 MLTPL
6GB-21B-B1LF 5" CLD 23 MLTPL
6GB-21C-B1LF 6" CLD 23 MLTPL
6GB-21E-B1LF 8" CLD 23 MLTPL
6SC-100-B1LF 3" CLD 23 MLTPL
6SC-100-B1LLF 3" CLD 23 MLTPL
6SC-108-B1LF 2" CLD 23 MLTPL
6SC-108-B1LLF 2" CLD 23 MLTPL
6SC-109-B1LF 2 1/2" CLD 23 MLTPL
6SC-109-B1LLF 2 1/2" CLD 23 MLTPL
6SC-10A-B1LF 4" CLD 23 MLTPL
6SC-10A-B1LLF 4" CLD 23 MLTPL
6SC-10B-B1LF 5" CLD 23 MLTPL
6SC-10B-B1LF 5" CLD 23 MLTPL
6SC-10B-B1LLF 5" CLD 23 MLTPL
6SC-10C-B1LF 6" CLD 23 MLTPL
6SC-10C-B1LLF 6" CLD 23 MLTPL
6SC-10E-01LF 8" CLD 23 MLTPL
6SC-10E-01LLF 8" CLD 23 MLTPL
6SC-10G-01LF 10" CLD 23 MLTPL
6SC-10G-01LLF 10" CLD 23 MLTPL
6SC-10H-01LF 12" CLD 23 MLTPL
6SC-10H-01LLF 12" CLD 23 MLTPL
6SC-10J-01LF 14" CLD 23 MLTPL
6SC-10K-01LF 16" CLD 23 MLTPL
6SC-200-B1LF 3" CLD 23 MLTPL
6SC-208-B1LF 2" CLD 23 MLTPL
6SC-209-B1LF 2 1/2" CLD 23 MLTPL
6SC-20A-B1LF 4" CLD 23 MLTPL
6SC-20C-B1LF 6" CLD 23 MLTPL
6SC-20E-01LF 8" CLD 23 MLTPL
6WC-100-E1LF 3" CLD 23 MLTPL
6WC-100-N1LF 3" CLD 23 MLTPL
6WC-108-E1LF 2" CLD 23 MLTPL
6WC-108-N1LF 2" CLD 23 MLTPL
6WC-109-E1LF 2 1/2" CLD 23 MLTPL
6WC-109-N1LF 2 1/2" CLD 23 MLTPL
6WC-10A-E1LF 4" CLD 23 MLTPL
6WC-10A-N1LF 4" CLD 23 MLTPL
6WC-10B-E1LF 5" CLD 23 MLTPL
6WC-10B-N1LF 5" CLD 23 MLTPL
6WC-10C-E1LF 6" CLD 23 MLTPL
6WC-10C-N1LF 6" CLD 23 MLTPL
6WC-10E-E1LF 8" CLD 23 MLTPL
6WC-10E-N1LF 8" CLD 23 MLTPL
6WC-10G-E1LF 10" CLD 23 MLTPL
6WC-10G-N1LF 10" CLD 23 MLTPL
6WC-10H-E1LF 12" CLD 23 MLTPL
6WC-10H-N1LF 10" CLD 23 MLTPL
6WC-10J-N1LF 14" CLD 23 MLTPL
6WC-10K-N1LF 12" CLD 23 MLTPL
6WC-10M-N1LF 18" CLD 23 MLTPL
6WC-10N-N1LF 20" CLD 23 MLTPL
6WC-10P-N1LF 24" CLD 23 MLTPL
Apollo BFV (FxG) 2.5" - 10" CLD 23 MLTPL
Apollo BFV (FxG)-300 2.5" - 10" CLD 23 MLTPL
Apollo BFV (GxG) 2.5" - 10" CLD 23 MLTPL
Apollo BFV (GxG)-300 2.5" - 10" CLD 23 MLTPL

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



 
Control Devices, LLC DBA Kerick Valve 
1555 Larkin Williams Road
Fenton, MO 63026 
United States 
904-732-2258
Visit this company's website


Facility : Fenton, MO

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Miscellaneous Process Devices/Components
PFXX-K [1] CLD 23 MLTPL
PFXXX[G] [1] CLD 23 MLTPL
PFXXXX[G] [1] CLD 23 MLTPL
PFXXXXX[G] [1] CLD 23 MLTPL
PFXXXXXX[G] [1] CLD 23 MLTPL

[1] P Series Float: 
    XX, XXX, XXXX, XXXXX, XXXXXX - Size of the floats in inches
[2] P Series Rod: 
    XX - Length of rod in inches
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

Valves
HTI(A)(B)(C)(D)(E)(F) Float Valves[3] [G] [4] CLD 23 MLTPL
I(A)(B)(C)(D)(E)(F) Float Valves[3] [G] [4] CLD 23 MLTPL
M(A)(B)(C)(D)(E)(F) Float Valves[3] [G] [3] CLD 23 MLTPL
VTI(A)(B)(C)(D)(E)(F) Float Valves[3] [G] [4] CLD 23 MLTPL

[3] For all valves: 
    [2] May represent the following suffixes when present: 
        -316 - 316 grade stainless steel 
        -BMP - Bent pin 
        -R   - Reversed arm 
        -V   - Vertical 
        -P   - Polyfort FPP 1601-11 
        -G   - Geon 4M4110 TRANS 9492 
        -NT  - Natural (P Series only)
        -BK  - Black (P Series only)
[4] M, I, HT and VT Series Float Valves: 
    I  - I Series 
    M  - M Series 
    HT - Horizontal Tank 
    VT - Vertical Tank 
    (A) Valve type: 
        A     - Adjustable 
        blank - Non-adjustable 
    (B) Inlet size: 
        25 - 1/4" tubing inlet 
        2P - 1/4" pipe inlet 
        2S - 1/4" short pipe inlet 
        38 - 3/8" tubing inlet 
        3P - 3/8" pipe 
        05 - 1/2" pipe 
        I2 - Index 1/4" tubing 
        B2 - Bayonet 1/4" tubing 
        32 - 3/8" step 1/4" tubing 
        T5 - 1/2" tapped with 1/4" 
    (C) Material: 
        2 - HR 5009 
        7 - Polyfort FPP 1606-11 
        8 - Geon M4110 
    (D) Orifice size: 
        Blank - 0.093 #4 
        1  - .042 
        2  - .052 
        3  - .062 
        4  - .093 
        6  - .125 
        10 - .1719 
        12 - .188 
    (E) Float: 
        Blank - PF154-NT 
        AN - PF152-NT 
        AB - PF152-BK 
        IB - PF1525-BK 
        IN - PF1525-NT
        BN - PF153-NT 
        BB - PF153-BK 
        GB - PF154-BK 
        CN - PF1753-NT 
        CB - PF1753-BK 
        DN - PF222-NT 
        DB - PF222-BK 
        EN - PF224-NT 
        EB - PF224-BK 
        FN - PF1752-NT 
        FB - PF1752-BK 
        NT - Natural 
        BK - Black 
    (F) Arm: 
        Blank - Reg. Arm 
        S    - s-arm 
        IH00 - Hoz 0" drop 
        IH07 - Hoz .75" drop 
        IH12 - Hoz 1.2" drop 
        IH20 - Hoz 2" drop 
        IV01 - Vert 1" drop
[5] P Series Valves: 
    (I) Mount: 
        S - Standard 
        T - Tank 
        X - Extended 
    (J) Inlet size: 
        38  - 3/8" 
        05  - 1/2" 
        75  - .75" 
        100 - 1" 
        125 - 1.25" 
        150 - 1.5" 
    (K) Outlet size: 
        38 - 3/8" 
        05 - 1/2" 
        Blank - Inlet size 
    (L) Orifice size: 
        L   - Low flow 
        S   - Standard flow 
        187 - .187" 
        25  - .25" 
        312 - .312" 
    (M) Trim hardware: 
        S - Stainless
        This character may be blank
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



 
CORE E&C Co., LTD 
3rd Floor, 90-1 Beonyeong-ro, Nam-gu
Ulsan 
44721 
Republic of Korea 
82 10 2642 1830


Facility : Chungcheongnam-do, Republic of Korea

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Mechanical Devices [G]
Vertical Pressure Filter[1] [2] 51" - 62" CLD 23 MLTPL

[1] Certified for a minimum daily flow rate of 816,000 Liters/day.
[2] Certification does not include media.
[3] Certified for a minimum daily flow rate of 648,000 Liters/day.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



 
CORE E&C Co., LTD. 
3rd Floor, 90-1 Beonyeong-ro
Nam-gu, Ulsan, 44721 
Republic of Korea 
052-227-7774


Facility : Gyeonggi-Do, Republic of Korea

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Pumps[G]
Feed Pump / 1Y 3x2-6 S 3" x 2" CLD 23 MLTPL

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



 
COSMOIND Co. Ltd. 
12, Eumdammal-gil, Jeonui-Myeon
Sejong-Si 30006 
Republic of Korea 
82 44 863 2337
Visit this company's website


Facility : Sejong-Si, Republic of Korea

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Tapping Tee, Service Saddles[G]
E/F Saddle (IPS) WE-BS-01 4" x 2" CLD 23 MLTPL
E/F Saddle (IPS) WE-BS-02 4" x 3" CLD 23 MLTPL
E/F Saddle (IPS) WE-BS-03 6" x 2" CLD 23 MLTPL
E/F Saddle (IPS) WE-BS-04 6" x 3" CLD 23 MLTPL
E/F Saddle (IPS) WE-BS-05 6" x 4" CLD 23 MLTPL
E/F Saddle (IPS) WE-BS-06 8" x 2" CLD 23 MLTPL
E/F Saddle (IPS) WE-BS-07 8" x 3" CLD 23 MLTPL
E/F Saddle (IPS) WE-BS-08 8" x 4" CLD 23 MLTPL
E/F Saddle (IPS) WE-BS-09 8" x 6" CLD 23 MLTPL
E/F Tapping Tee (CTS) WE-TT-01 2" x 1/2" CLD 23 MLTPL
E/F Tapping Tee (CTS) WE-TT-03 2" x 1" CLD 23 MLTPL
E/F Tapping Tee (CTS) WE-TT-13 3" x 1/2" CLD 23 MLTPL
E/F Tapping Tee (CTS) WE-TT-15 3" x 1" CLD 23 MLTPL
E/F Tapping Tee (CTS) WE-TT-25 4" x 1/2" CLD 23 MLTPL
E/F Tapping Tee (CTS) WE-TT-27 4" x 1" CLD 23 MLTPL
E/F Tapping Tee (CTS) WE-TT-37 6" x 1/2" CLD 23 MLTPL
E/F Tapping Tee (CTS) WE-TT-39 6" x 1" CLD 23 MLTPL
E/F Tapping Tee (CTS) WE-TT-49 8" x 1/2" CLD 23 MLTPL
E/F Tapping Tee (CTS) WE-TT-51 8" x 1" CLD 23 MLTPL
E/F Tapping Tee (CTS) WE-TT-61 12" x 1/2" CLD 23 MLTPL
E/F Tapping Tee (CTS) WE-TT-63 12" x 1" CLD 23 MLTPL
E/F Tapping Tee (IPS) WE-TT-02 2" x 3/4" CLD 23 MLTPL
E/F Tapping Tee (IPS) WE-TT-04 2" x 1" CLD 23 MLTPL
E/F Tapping Tee (IPS) WE-TT-05 2" x 1 1/4" CLD 23 MLTPL
E/F Tapping Tee (IPS) WE-TT-06 2" x 2" CLD 23 MLTPL
E/F Tapping Tee (IPS) WE-TT-14 3" x 3/4" CLD 23 MLTPL
E/F Tapping Tee (IPS) WE-TT-16 3" x 1" CLD 23 MLTPL
E/F Tapping Tee (IPS) WE-TT-17 3" x 1 1/4" CLD 23 MLTPL
E/F Tapping Tee (IPS) WE-TT-18 3" x 2" CLD 23 MLTPL
E/F Tapping Tee (IPS) WE-TT-26 4" x 3/4" CLD 23 MLTPL
E/F Tapping Tee (IPS) WE-TT-28 4" x 1" CLD 23 MLTPL
E/F Tapping Tee (IPS) WE-TT-29 4" x 1 1/4" CLD 23 MLTPL
E/F Tapping Tee (IPS) WE-TT-30 4" x 2" CLD 23 MLTPL
E/F Tapping Tee (IPS) WE-TT-38 6" x 3/4" CLD 23 MLTPL
E/F Tapping Tee (IPS) WE-TT-40 6" x 1" CLD 23 MLTPL
E/F Tapping Tee (IPS) WE-TT-41 6" x 1 1/4" CLD 23 MLTPL
E/F Tapping Tee (IPS) WE-TT-42 6" x 2" CLD 23 MLTPL
E/F Tapping Tee (IPS) WE-TT-50 8" x 3/4" CLD 23 MLTPL
E/F Tapping Tee (IPS) WE-TT-52 8" x 1" CLD 23 MLTPL
E/F Tapping Tee (IPS) WE-TT-53 8" x 1 1/4" CLD 23 MLTPL
E/F Tapping Tee (IPS) WE-TT-54 8" x 2" CLD 23 MLTPL
E/F Tapping Tee (IPS) WE-TT-62 12" x 3/4" CLD 23 MLTPL
E/F Tapping Tee (IPS) WE-TT-64 12" x 1" CLD 23 MLTPL
E/F Tapping Tee (IPS) WE-TT-65 12" x 1 1/4" CLD 23 MLTPL
E/F Tapping Tee (IPS) WE-TT-66 12' x 2" CLD 23 MLTPL
E/F Tapping Tee (IPS) WE-TT-67 2"x1/2" CLD 23 MLTPL
E/F Tapping Tee (IPS) WE-TT-68 3"x1/2" CLD 23 MLTPL
E/F Tapping Tee (IPS) WE-TT-69 4"x1/2" CLD 23 MLTPL
E/F Tapping Tee (IPS) WE-TT-70 4"X2½" CLD 23 MLTPL
E/F Tapping Tee (IPS) WE-TT-71 4"X3" CLD 23 MLTPL
E/F Tapping Tee (IPS) WE-TT-72 6"X2½" CLD 23 MLTPL
E/F Tapping Tee (IPS) WE-TT-73 6"X3" CLD 23 MLTPL
E/F Tapping Tee (IPS) WE-TT-74 6"X4" CLD 23 MLTPL
E/F Tapping Tee (IPS) WE-TT-75 8"X2½" CLD 23 MLTPL
E/F Tapping Tee (IPS) WE-TT-76 8"X3" CLD 23 MLTPL
E/F Tapping Tee (IPS) WE-TT-77 8"X4" CLD 23 MLTPL
E/F Tapping Tee (IPS) WE-TT-78 8"X6" CLD 23 MLTPL
E/F Tapping Tee (IPS) WE-TT-79 12"X2½" CLD 23 MLTPL
E/F Tapping Tee (IPS) WE-TT-80 12"X3" CLD 23 MLTPL
E/F Tapping Tee (IPS) WE-TT-81 12"X4" CLD 23 MLTPL
E/F Tapping Tee (IPS) WE-TT-82 12"X6" CLD 23 MLTPL
E/F Tapping Tee (IPS) WE-TT-83 16"X2½" CLD 23 MLTPL
E/F Tapping Tee (IPS) WE-TT-84 16"X3" CLD 23 MLTPL
E/F Tapping Tee (IPS) WE-TT-85 16"X4" CLD 23 MLTPL
E/F Tapping Tee (IPS) WE-TT-86 16"X6" CLD 23 MLTPL
E/F Tapping Tee (IPS) WME-TT-07 90 mm x 20 mm CLD 23 MLTPL
E/F Tapping Tee (IPS) WME-TT-08 90 mm x 25 mm CLD 23 MLTPL
E/F Tapping Tee (IPS) WME-TT-09 90 mm x 32 mm CLD 23 MLTPL
E/F Tapping Tee (IPS) WME-TT-06 63 mm x 63 mm CLD 23 MLTPL
E/F Tapping Tee (IPS) WME-TT-05 63 mm x 50 mm CLD 23 MLTPL
E/F Tapping Tee (IPS) WME-TT-04 63 mm x 40 mm CLD 23 MLTPL
E/F Tapping Tee (IPS) WME-TT-03 63 mm x 32 mm CLD 23 MLTPL
E/F Tapping Tee (IPS) WME-TT-01 63 mm x 20 mm CLD 23 MLTPL
E/F Tapping Tee (IPS) WME-TT-10 90 mm x 40 mm CLD 23 MLTPL
E/F Tapping Tee (IPS) WME-TT-02 63 mm x 25 mm CLD 23 MLTPL
E/F Tapping Tee (IPS) WME-TT-11 90 mm x 50 mm CLD 23 MLTPL
E/F Tapping Tee (IPS) WME-TT-12 90 mm x 63 mm CLD 23 MLTPL
E/F Tapping Tee (IPS) WME-TT-13 110 mm x20 mm CLD 23 MLTPL
E/F Tapping Tee (IPS) WME-TT-14 110 mm x 25 mm CLD 23 MLTPL
E/F Tapping Tee (IPS) WME-TT-15 110 mm x 32 mm CLD 23 MLTPL
E/F Tapping Tee (IPS) WME-TT-16 110 mm x 40 mm CLD 23 MLTPL
E/F Tapping Tee (IPS) WME-TT-17 110 mm x 50 mm CLD 23 MLTPL
E/F Tapping Tee (IPS) WME-TT-18 110 mm x 63 mm CLD 23 MLTPL
E/F Tapping Tee (IPS) WME-TT-19 160 mm x 20 mm CLD 23 MLTPL
E/F Tapping Tee (IPS) WME-TT-20 160 mm x 25 mm CLD 23 MLTPL
E/F Tapping Tee (IPS) WME-TT-21 160 mm x 32 mm CLD 23 MLTPL
E/F Tapping Tee (IPS) WME-TT-22 160 mm x 40 mm CLD 23 MLTPL
E/F Tapping Tee (IPS) WME-TT-23 160 mm x 50 mm CLD 23 MLTPL
E/F Tapping Tee (IPS) WME-TT-24 160 mm x 63 mm CLD 23 MLTPL
E/F Tapping Tee (IPS) WME-TT-25 200 mm x 25 mm CLD 23 MLTPL
E/F Tapping Tee (IPS) WME-TT-26 200 mm x 32 mm CLD 23 MLTPL
E/F Tapping Tee (IPS) WME-TT-27 200 mm x 40 mm CLD 23 MLTPL
E/F Tapping Tee (IPS) WME-TT-28 225 mm x 50 mm CLD 23 MLTPL
E/F Tapping Tee (IPS) WME-TT-29 225 mm x 63 mm CLD 23 MLTPL
E/F Tapping Tee (IPS) WME-TT-30 280 mm x 50 mm CLD 23 MLTPL
E/F Tapping Tee (IPS) WME-TT-31 280 mm x 63 mm CLD 23 MLTPL
E/F Tapping Tee (IPS) WME-TT-32 315 mm x 32 mm CLD 23 MLTPL
E/F Tapping Tee (IPS) WME-TT-33 315 mm x 50 mm CLD 23 MLTPL
E/F Tapping Tee (IPS) WME-TT-34 315 mm x 63 mm CLD 23 MLTPL
E/F Tapping Tee (IPS) WME-TT-35 110 mm x 75 mm CLD 23 MLTPL
E/F Tapping Tee (IPS) WME-TT-36 110 mm x 90 mm CLD 23 MLTPL
E/F Tapping Tee (IPS) WME-TT-37 160 mm x 75 mm CLD 23 MLTPL
E/F Tapping Tee (IPS) WME-TT-38 160 mm x 90 mm CLD 23 MLTPL
E/F Tapping Tee (IPS) WME-TT-39 160 mm x 110 mm CLD 23 MLTPL
E/F Tapping Tee (IPS) WME-TT-40 225 mm x 75 mm CLD 23 MLTPL
E/F Tapping Tee (IPS) WME-TT-41 225 mm x 90 mm CLD 23 MLTPL
E/F Tapping Tee (IPS) WME-TT-42 225 mm x 110 mm CLD 23 MLTPL
E/F Tapping Tee (IPS) WME-TT-43 225 mm x 160 mm CLD 23 MLTPL
E/F Tapping Tee (IPS) WME-TT-44 280 mm x 75 mm CLD 23 MLTPL
E/F Tapping Tee (IPS) WME-TT-45 280 mm x 90 mm CLD 23 MLTPL
E/F Tapping Tee (IPS) WME-TT-46 280 mm x 110 mm CLD 23 MLTPL
E/F Tapping Tee (IPS) WME-TT-47 280 mm x 160 mm CLD 23 MLTPL
E/F Tapping Tee (IPS) WME-TT-48 315 mm x 75 mm CLD 23 MLTPL
E/F Tapping Tee (IPS) WME-TT-49 315 mm x 90 mm CLD 23 MLTPL
E/F Tapping Tee (IPS) WME-TT-50 315 mm x 110 mm CLD 23 MLTPL
E/F Tapping Tee (IPS) WME-TT-51 315 mm x 160 mm CLD 23 MLTPL
E/F Tapping Tee (IPS) WME-TT-52 400 mm x 75 mm CLD 23 MLTPL
E/F Tapping Tee (IPS) WME-TT-53 400 mm x 90 mm CLD 23 MLTPL
E/F Tapping Tee (IPS) WME-TT-54 400 mm x 110 mm CLD 23 MLTPL
E/F Tapping Tee (IPS) WME-TT-55 400 mm x 160 mm CLD 23 MLTPL
E/F Saddle (IPS) WME-BS-01 160 mm x 110 mm CLD 23 MLTPL
E/F Saddle (IPS) WME-BS-02 225 mm x 110 mm CLD 23 MLTPL
E/F Saddle (IPS) WME-BS-03 225 mm x 160 mm CLD 23 MLTPL

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



 
Custom Pipe and Fabrication, Inc. 
10560 Fern Avenue
Stanton, CA 90680 
United States 
800-553-3058 
714-761-8801
Visit this company's website


Facility : Stanton, CA

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Miscellaneous Process Devices/Components [G]
Threaded Shaft with Coupling[1] [2] 3/4" - 3 3/4" CLD 23 SS

[1] Certified for use in 4" and greater vertical turbine pumps used in municipal and
    community wells with a minimum flow of 54,000 gallons per day.
[2] Only products bearing the NSF Mark on the product, product packaging, and/or
    documentation shipped with the product are Certified.
[3] The Listed size is the minimum connection size of the pump in which the product will be
    used.
[4] The actual size of the oil tube is 1.5-8", however it is still for use on the column
    pipe's connection size range of 4-14".
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



Facility : Conroe, TX

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Miscellaneous Process Devices/Components[1] [G]
Hanger Flange[2] 4" - 14" CLD 23 CS
Threaded Shaft with Coupling[2] 3/4" - 3 3/4" CLD 23 SS

[1] Only products bearing the NSF Mark on the product, product packaging, and/or
    documentation shipped with the product are Certified.
[2] Certified for use in 4" and greater vertical turbine pumps used in municipal and
    community wells with a minimum flow of 54,000 gallons per day.
[3] The Listed size is the minimum connection size of the pump in which the product will be
    used.
[4] The actual size of the oil tube is 1.5"-8", however it is still for use on the column
    pipe's connection size range of 4"-14".
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



Facility : Lubbock, TX

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Miscellaneous Process Devices/Components[1] [G]
Flanged Column Pipe 4" - 30" CLD 23 MLTPL
Hanger Flange 4" - 14" CLD 23 SS
Threaded Shaft with Coupling 3/4" - 3 3/4" CLD 23 MLTPL

[1] Certified for use in 4" and greater vertical turbine pumps used in municipal and
    community wells with a minimum flow of 54,000 gallons per day.
[2] The Listed size is the minimum connection size of the pump in which the product will be
    used.
[3] The actual size of the oil tube is 1.5"-8", however it is still for use on the column
    pipe's connection size range of 4"-14".
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
      documentation shipped with the product are Certified.


 
D.I. Enviro Corporation 
105, Mireuk-ro, Daedeok-myeon
Anseong City, Gyeonggi-Do 456-832 
Republic of Korea 
82 2 3441 9300
Visit this company's website


Facility : Gyeonggi-Do, Korea

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Filter Underdrain [G]
Hydro Underdrain Block [1] CLD 23 MLTPL

[1] Maximum surface area: 8.0 sq. ft. per sq. ft. filter area.
    Minimum flow: 2 gallons/minute per sq. ft. filter area.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



 
D.P.S. PLASTICS Co., Ltd. 
No. 97, Tianchi Street, Shalu District
Taichung 43354 
Taiwan 
886 4 2662 0596


Facility : Taichung, Taiwan

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Valves
CPVC/EP BUTTERFLY VALVE 2" - 8" C. HOT MLTPL
CPVC/FPM BUTTERFLY VALVE 4" - 8" C. HOT MLTPL
CPVC/FPM SPRING CHECK VALVE 4" C. HOT MLTPL
CPVC/FPM TRUE UNION BALL VALVE 1/2 - 4" C. HOT MLTPL
PVC/EP BUTTERFLY VALVE 2" - 8" CLD 23 PVC
PVC/FPM BUTTERFLY VALVE 4" - 8" CLD 23 PVC
PVC/FPM SPRING CHECK VALVE 4" CLD 23 PVC
PVC/FPM TRUE UNION BALL VALVE 1/2" - 4" CLD 23 PVC



 
DAE Controls LLC 
35355 Beattie Drive
Sterling Heights, MI 48312 
United States 
248-635-3708


Facility : Ningbo, China

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Water Meters[G]
DAEMJ (F) 2" 2" CLD 23 MLTPL

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



 
Dae Han Control Co., Ltd. 
39, Gadal 1-ro
Busan, Gangseo-gu 
Republic of Korea 
82 51 974 1221
Visit this company's website


Facility : Gangseo-gu, Republic of Korea

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Valves[1] [2] [G]
Hi-Per BFV 2" - 120" CLD 23 MLTPL
Hi-Per BFV Cylinder Type 2" - 120" CLD 23 MLTPL
Triple BFV 2" - 120" CLD 23 MLTPL

[1] Certified for use in a 4 million gallon reservoir.
[2] Only products bearing the NSF Mark on the product, product packaging, and/or
    documentation shipped with the product are Certified.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



 
Daeyoun Co., Ltd. 
23, Dosong-ro, Dogo-myein
Asan-si 
Chungcheongnam-Do 31554 
Republic of Korea 
82 41 546 9966
Visit this company's website


Facility : Chungcheongnam-Do, Korea, Republic of

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Service Saddles[1] [G]
EF BRANCH SADDLE 2 x 2" - 12 x 8" CLD 23 MLTPL

[1] Listed for the following sizes and configurations:
    EF TAPPING TEE
    1-1/4" IPS x 3/4" IPS
    1-1/4" IPS x 3/4" CTS
    1-1/4" CTS x 3/4" IPS
    1-1/4" CTS x 3/4" CTS
    1-1/4" IPS x 1" CTS
    1-1/4" IPS x 1" IPS
    1-1/4" CTS x 1" CTS
    1-1/4" CTS x 1" IPS
    1-1/4" IPS x 1-1/4" CTS
    1-1/4" IPS x 1-1/4" IPS
    1-1/4" CTS x 1-1/4" CTS
    1-1/4" CTS x 1-1/4" IPS
    2" IPS x 1/2" CTS
    2" IPS x 1/2" IPS
    2" IPS x 3/4" IPS
    2" IPS x 3/4" CTS
    2" IPS x 1" CTS
    2" IPS x 1" IPS
    3" IPS x 1" CTS
    3" IPS x 1" IPS
    4" IPS x 1/2" CTS
    4" IPS x 1/2" IPS
    4" IPS x 3/4" IPS
    4" IPS x 1" CTS
    4" IPS x 1" IPS
    6" IPS x 3/4" IPS
    6" IPS x 1" CTS
    8" IPS x 3/4" IPS
    8" IPS x 1" CTS
    12 "IPS x 3/4" IPS
    12" x 1" CTS
    EF HV TAPPING TEE
    2" x 2" IPS
    3" x 2" IPS
    4" x 2" IPS
    6" x 2" IPS
    8" x 2" IPS
    12" x 2" IPS
    16" x 2" IPS
    EF BRANCH SADDLE
    2" x 2" IPS
    3" x 2" IPS
    4" x 2" IPS
    4" x 4" IPS
    6" x 2" IPS
    6" x 4" IPS
    6" x 6" IPS
    8" x 4" IPS
    8" x 6" IPS
    8" x 8" IPS
    12" x 2" IPS
    12" x 4" IPS
    12" x 6" IPS
    12" x 8" IPS
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

Tapping Tee[1] [G]
EF HV TAPPING TEE 2 x 2" - 16 x 2" CLD 23 MLTPL
EF TAPPING TEE 1 1/4 x 3/4 - 8 x 1" CLD 23 MLTPL

[1] Listed for the following sizes and configurations:
    EF TAPPING TEE
    1-1/4" IPS x 3/4" IPS
    1-1/4" IPS x 3/4" CTS
    1-1/4" CTS x 3/4" IPS
    1-1/4" CTS x 3/4" CTS
    1-1/4" IPS x 1" CTS
    1-1/4" IPS x 1" IPS
    1-1/4" CTS x 1" CTS
    1-1/4" CTS x 1" IPS
    1-1/4" IPS x 1-1/4" CTS
    1-1/4" IPS x 1-1/4" IPS
    1-1/4" CTS x 1-1/4" CTS
    1-1/4" CTS x 1-1/4" IPS
    2" IPS x 1/2" CTS
    2" IPS x 1/2" IPS
    2" IPS x 3/4" IPS
    2" IPS x 3/4" CTS
    2" IPS x 1" CTS
    2" IPS x 1" IPS
    3" IPS x 1" CTS
    3" IPS x 1" IPS
    4" IPS x 1/2" CTS
    4" IPS x 1/2" IPS
    4" IPS x 3/4" IPS
    4" IPS x 1" CTS
    4" IPS x 1" IPS
    6" IPS x 3/4" IPS
    6" IPS x 1" CTS
    8" IPS x 3/4" IPS
    8" IPS x 1" CTS
    12 "IPS x 3/4" IPS
    12" x 1" CTS
    EF HV TAPPING TEE
    2" x 2" IPS
    3" x 2" IPS
    4" x 2" IPS
    6" x 2" IPS
    8" x 2" IPS
    12" x 2" IPS
    16" x 2" IPS
    EF BRANCH SADDLE
    2" x 2" IPS
    3" x 2" IPS
    4" x 2" IPS
    4" x 4" IPS
    6" x 2" IPS
    6" x 4" IPS
    6" x 6" IPS
    8" x 4" IPS
    8" x 6" IPS
    8" x 8" IPS
    12" x 2" IPS
    12" x 4" IPS
    12" x 6" IPS
    12" x 8" IPS
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



 
DC Solutions, s.r.o. 
Voskovcova 1075/51
Praha 5 
152 00 
Czech Republic 
420 739 09 89 89
Visit this company's website


Facility : Fano, Italy

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Reverse Osmosis Element[1]
Membrania OceanFlow HF [2] [3] 8" x 40" CLD 23 MLTPL
Membrania OceanFlow HF 4040[2] [3] 4" x 40" CLD 23 MLTPL
Membrania OceanFlow HF Plus[2] [3] 8" x 40" CLD 23 MLTPL
Membrania OceanFlow HR [2] [3] 8" x 40" CLD 23 MLTPL
Membrania OceanFlow HR 4040[2] [3] 4" x 40" CLD 23 MLTPL
Membrania OceanFlow HR Plus[2] [3] 8" x 40" CLD 23 MLTPL

[1] Sizes indicated are expressed as diameter x length.
[2] Certified for a minimum permeate (product water) flow of 1,191 L/day.
[3] Certified elements must be flushed of preservative in the field for a minimum of 2 hours
    at the following parameters:
    Membrania OceanFlow HR at 12000 l/h at 500 psi	
    Membrania OceanFlow HR Plus at 12000 l/h at 500 psi
    Membrania OceanFlow HR 4040 at 1500 l/h at 500 psi	
    Membrania OceanFlow HF	 at 15000 l/h at 500 psi
    Membrania OceanFlow HF Plus at 15000 l/h at 500 psi
    Membrania OceanFlow HF 4040 at 1500 l/h at 500 psi



 
De Nora Water Technologies, LLC 
3000 Advance Lane
Colmar, PA 18915 
United States 
281-240-6770


Facility : # 2 USA

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Filter Underdrain[1]
ANCHOR-RITE™System [2] CLD 23 MLTPL
Tetra "LP" Block™System [2] CLD 23 MLTPL
Tetra "U" Block™System [2] CLD 23 MLTPL

[1] System includes Tetra “U” Block™, Tetra “LP” Block™, or Tetra "LP" ANCHOR-RITE Block™, S
    Plate™, B Plate®, M Plate™, S2 Plate™, Tetra Block™, Flume Bridging Strips, End Caps,
    and FlumeFlow Interface Plate.
[2] Certified for a minimum flow of 1 gallon/minute per square foot of surface area.

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.


 
Deerfos Membranes Co., Ltd. 
6, Hangye-gil, Gadeok-myeon
Sangdang-gu, Cheongju-si 
Chungcheongbuk-do 360-853 
Republic of Korea 
82 43 287 0108
Visit this company's website


Facility : Chungcheongbuk-do, Republic of Korea

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Miscellaneous Treatment Devices/Components[1] [G]
DFU-PVDF100 [2] CLD 23 PVDF

[1] Certification includes the membrane material only.
[2] Certified for a minimum daily flow of 6,700 L/day.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



 
Delavan AG Pumps Inc. 
1226 Linden Avenue
Suite 123 
Minneapolis, MN 55403 
United States 
866-335-2826 
612-333-3231
Visit this company's website


Facility : Minneapolis, MN

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Pumps[1] [G]
PowerFLO 5830 Series 1/2" D. HOT MLTPL
PowerFLO 5836 Series 1/2" D. HOT MLTPL
PowerFLO 5840 Series 1/2" D. HOT MLTPL
PowerFLO 5850 Series 1/2" D. HOT MLTPL
PowerFLO 5930 Series 3/4" D. HOT MLTPL
PowerFLO 5936 Series 3/4" D. HOT MLTPL
PowerFLO 5940 Series 3/4" D. HOT MLTPL
PowerFLO 5950 Series 3/4" D. HOT MLTPL
PowerFLO 7801 Series 5/8" D. HOT MLTPL
PowerFLO 7802 Series 5/8" D. HOT MLTPL
PowerFLO 7811 Series 3/8" D. HOT MLTPL
PowerFLO 7812 Series 3/8" D. HOT MLTPL
PowerFLO 7822 Series 5/8" D. HOT MLTPL
PowerFLO 7832 Series 3/8" D. HOT MLTPL
PowerFLO 7870 Series 1/2" D. HOT MLTPL
PowerFLO 7970 Series 3/4" D. HOT MLTPL

[1] Only products bearing the NSF Mark on the product, product packaging, and/or
    documentation shipped with the product are Certified.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



 
DeZURIK, Inc. 
250 Riverside Avenue North
Sartell, MN 56377 
United States 
320-259-2000


Facility : Sartell, MN

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Valves
DeZurik PEF Full Port Eccentric Plug Valves[G] 4" - 36" CLD 23 MLTPL

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



 
Dosatron International Inc. 
2090 Sunnydale Boulevard
Clearwater, FL 33765 
United States 
800-523-8499 
727-443-5404
Visit this company's website


Facility : # 1 France

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Pumps - Chemical Metering [G]
D14WL2NAFII[1] 3/4" CLD 23 MLTPL
D14WL2NVFII[1] 3/4" CLD 23 MLTPL
D14WL3000NAFII[1] 3/4" CLD 23 MLTPL
D14WL3000NIEAFII[1] 3/4" CLD 23 MLTPL
D14WL3000NIEVFII[1] 3/4" CLD 23 MLTPL
D14WL3000NVFII[1] 3/4" CLD 23 MLTPL
D40WL2NAF[2] N/A CLD 23 MLTPL
D40WL2NBPAF[2] N/A CLD 23 MLTPL
D40WL2NBPVF[2] N/A CLD 23 MLTPL
D40WL2NBPVFK[2] N/A CLD 23 MLTPL
D40WL2NVF [2] N/A CLD 23 MLTPL
D40WL2NVFK[2] N/A CLD 23 MLTPL
D40WL3000NAF [2] N/A CLD 23 MLTPL
D40WL3000NAFII[1] 1 1/2" CLD 23 MLTPL
D40WL3000NBPAF[2] N/A CLD 23 MLTPL
D40WL3000NBPVF[2] N/A CLD 23 MLTPL
D40WL3000NBPVFK[2] N/A CLD 23 MLTPL
D40WL3000NIEAF [2] N/A CLD 23 MLTPL
D40WL3000NIEAFII[1] 1 1/2" CLD 23 MLTPL
D40WL3000NIEBPAF[2] N/A CLD 23 MLTPL
D40WL3000NIEVFII[1] 1 1/2" CLD 23 MLTPL
D40WL3000NVF[2] N/A CLD 23 MLTPL
D40WL3000NVFII[1] 1 1/2" CLD 23 MLTPL
D40WL3000NVFK[2] N/A CLD 23 MLTPL

[1] Certification for use with the following media at the maximum concentrations below.
    These products are evaluated by diluting the exposed water treatment chemicals to the
    typical use level (TUL), as defined by NSF/ANSI/CAN 60. 
    Sodium Hypochlorite  - Liquid Concentration (15%) 
    Calcium Hypochlorite - Liquid Concentration (15%) [*] 
    [*] Liquid concentration may be created using 65% calcium hypochlorite powder.
[2] Certified for use with the following media at the maximum concentrations below. These
    products are evaluated by diluting the exposed water treatment chemicals to the typical
    use level (TUL), as defined by NSF/ANSI Standard 60.
    Sodium Hypochlorite - Liquid Concentration (15%)
    Calcium Hypochlorite - Liquid Concentration (15%)
    Hydrogen Peroxide - Liquid Concentration (50%)
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



 
Dosatron International S.A.S. 
Rue Pascal - BP6
33370 Tresses 
France 
33 5 57 97 11 11
Visit this company's website


Facility : Tresses, France

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Pumps - Chemical Metering [G]
D3WL2NAF[1] 3/4" CLD 23 MLTPL
D3WL2NVF[1] 3/4" CLD 23 MLTPL
D3WL3000NAF[1] 3/4" CLD 23 MLTPL
D3WL3000NIEAF[1] 3/4" CLD 23 MLTPL
D3WL3000NIEVF[1] 3/4" CLD 23 MLTPL
D3WL3000NVF[1] 3/4" CLD 23 MLTPL
D8WL3000NAF[1] 1 1/2" CLD 23 MLTPL
D8WL3000NIEAF[1] 1 1/2" CLD 23 MLTPL
D8WL3000NIEVF[1] 1 1/2" CLD 23 MLTPL
D8WL3000NVF[1] 1 1/2" CLD 23 MLTPL
D9WL2NAF[2] N/A CLD 23 MLTPL
D9WL2NBPAF[2] N/A CLD 23 MLTPL
D9WL2NBPVF[2] N/A CLD 23 MLTPL
D9WL2NBPVFK[2] N/A CLD 23 MLTPL
D9WL2NVF[2] N/A CLD 23 MLTPL
D9WL2NVFK[2] N/A CLD 23 MLTPL
D9WL3000NAF[2] N/A CLD 23 MLTPL
D9WL3000NBPAF[2] N/A CLD 23 MLTPL
D9WL3000NBPVF[2] N/A CLD 23 MLTPL
D9WL3000NBPVFK[2] N/A CLD 23 MLTPL
D9WL3000NIEAF[2] N/A CLD 23 MLTPL
D9WL3000NIEBPAF[2] N/A CLD 23 MLTPL
D9WL3000NVF[2] N/A CLD 23 MLTPL
D9WL3000NVFK[2] N/A CLD 23 MLTPL

[1] Certification for use with the following media at the maximum concentrations below.
    These products are evaluated by diluting the exposed water treatment chemicals to the
    typical use level (TUL), as defined by NSF/ANSI/CAN 60. 
    Sodium Hypochlorite  - Liquid Concentration (15%) 
    Calcium Hypochlorite - Liquid Concentration (15%) [*] 
    [*] Liquid concentration may be created using 65% calcium hypochlorite powder.
[2] Certified for use with the following media at the maximum concentrations below. These
    products are evaluated by diluting the exposed water treatment chemicals to the typical
    use level (TUL), as defined by NSF/ANSI Standard 60.
    Sodium Hypochlorite - Liquid Concentration (15%)
    Calcium Hypochlorite - Liquid Concentration (15%)
    Hydrogen Peroxide - Liquid Concentration (50%)
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



 
DRAG'EAU SARL 
4 rue Marin La Meslée ZA La Passerelle 1
Ensisheim 
68190 
France 
33 7 87 89 51 69
Visit this company's website


Facility : Ostuni, Brindisi, Italy

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Miscellaneous Process Devices/Components
EF-i20 20 mm CLD 23 MLTPL
EF-i25 25 mm CLD 23 MLTPL
EF-i32 32 mm CLD 23 MLTPL
EF-i40 40 mm CLD 23 MLTPL
EF-i50 50 mm CLD 23 MLTPL
EF-i65 65 mm CLD 23 MLTPL
EF-i80 80 mm CLD 23 MLTPL
EF-i100 100 mm CLD 23 MLTPL
EF-i150 150 mm CLD 23 MLTPL
EF-i200 200 mm CLD 23 MLTPL
EF-i250 250 mm CLD 23 MLTPL
EF-i300 300 mm CLD 23 MLTPL



 
Droople SA 
Rte du Verney 18
CH-1070 Puidoux 
Switzerland 
41 22 534 99 48
Visit this company's website


Facility : Guangdong, China

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Switches/Sensors[1]
Droople Smart Flow 1/2" / SAR-FT-NPT-MM12 .5" D. HOT MLTPL
Droople Smart Flow 3/4" / SAR-FT-NPT-MM34 .75" D. HOT MLTPL
Droople Smart Flow 1"/ SAR-FT-NPT-MM1 1" D. HOT MLTPL

[1] Only product with NPT thread is certified.



 
DuPont Memcor (Australia) Pty Ltd 
15 Blackman Crescent
South Windsor, New South Wales 2756 
Australia 
61 2 4577 0001


Facility : Windsor, Australia

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Microfiltration Devices[1] [2]
4S10T Microfiltration Sub-Manifold #119029 N/A CLD 23 MLTPL
4S10T Microfiltration Sub-Manifold #119030 N/A CLD 23 MLTPL
4 S10T Microfiltration Module Part# 119035 N/A CLD 23 MLTPL
CMF-S Expansion Filler Part #183326 N/A CLD 23 MLTPL
CMF-S Expansion Filler Part #183369 N/A CLD 23 MLTPL
CMF-S Insert (center) Part #183371 N/A CLD 23 MLTPL
CMF-S Insert (inner) Part #183318 N/A CLD 23 MLTPL
CMF-S Insert (outer) Part #183319 N/A CLD 23 MLTPL
CMF-S Insert (side) Part #183370 N/A CLD 23 MLTPL
CP1-L Centre Tube Part #120320 N/A CLD 23 MLTPL
CS Nylon Rack 10 Clovers Part #119134 N/A CLD 23 MLTPL
CS Nylon Rack 11 Clovers Part #119162 N/A CLD 23 MLTPL
CS Nylon Rack 12 Clovers Part #119133 N/A CLD 23 MLTPL
CS Nylon Rack 6 Clovers Part #119135 N/A CLD 23 MLTPL
CS Nylon Rack 7 Clovers Part #119160 N/A CLD 23 MLTPL
CS Nylon Rack 8 Clovers Part #119161 N/A CLD 23 MLTPL
CS Nylon Rack 9 Clovers Part #119132 N/A CLD 23 MLTPL
L10V Microfiltration Module Part #111053 N/A CLD 23 MLTPL
L10V Microfiltration Sub-Module Part #111316 N/A CLD 23 MLTPL
L10V Microfiltration Sub-Module Part #111317 N/A CLD 23 MLTPL
L10V Microfiltration Sub-Module Part #111319 N/A CLD 23 MLTPL
L10V Microfiltration Sub-Module Part #119315 N/A CLD 23 MLTPL
L10V Microfiltration Sub-Module Part #120228 N/A CLD 23 MLTPL
L10V Microfiltration Sub-Module Part #120236 N/A CLD 23 MLTPL
L20V Microfiltration Module Part #111037 N/A CLD 23 MLTPL
L20V Microfiltration Module Part #111082 N/A CLD 23 MLTPL
L20V Microfiltration Sub-Module Part# 120088 N/A CLD 23 MLTPL
L20V Microfiltration Sub-Module Part #111061 N/A CLD 23 MLTPL
L20V Microfiltration Sub-Module Part #111082 N/A CLD 23 MLTPL
L20V Microfiltration Sub-Module Part #120084 N/A CLD 23 MLTPL
L20 Series Module GA Part #111067 N/A CLD 23 MLTPL
M10C Microfiltration Module Part #111008 N/A CLD 23 MLTPL
M10C Microfiltration Module Part #111017 N/A CLD 23 MLTPL
M10C Microfiltration Module Part #111027 N/A CLD 23 MLTPL
M10C Microfiltration Module Part #111031 N/A CLD 23 MLTPL
M10C Microfiltration Module Part #111032 N/A CLD 23 MLTPL
M10C Microfiltration Module Part #111033 N/A CLD 23 MLTPL
M10C Microfiltration Module Part #111034 N/A CLD 23 MLTPL
M10C Microfiltration Module Part #111035 N/A CLD 23 MLTPL
M10C Microfiltration Module Part #111036 N/A CLD 23 MLTPL
M10C Microfiltration Module Part #111037 N/A CLD 23 MLTPL
M10C Microfiltration Module Part #111040 N/A CLD 23 MLTPL
M10C Microfiltration Module Part #111041 N/A CLD 23 MLTPL
M10C Microfiltration Module Part #111044 N/A CLD 23 MLTPL
M10C Microfiltration Module Part #120095 N/A CLD 23 MLTPL
M10C Microfiltration Sub-Module Part #120096 N/A CLD 23 MLTPL
M10C Microfiltration Sub-Module Part #120305 N/A CLD 23 MLTPL
M10V Microfiltration Module Part #111013 N/A CLD 23 MLTPL
M10V Microfiltration Module Part #111255 N/A CLD 23 MLTPL
M10V Microfiltration Sub-Module Part #120019 N/A CLD 23 MLTPL
M9C Microfiltration Module #111039 N/A CLD 23 MLTPL
M9C Microfiltration Sub-Module #120134 N/A CLD 23 MLTPL
M9C Microfiltration Sub-Module #120207 N/A CLD 23 MLTPL
S10T Microfiltration Sub-Module #119005 N/A CLD 23 MLTPL
S10T Microfiltration Sub-Module #119013 N/A CLD 23 MLTPL
S10T Microfiltration Sub-Module #119017 N/A CLD 23 MLTPL
S10T Microfiltration Sub-Module #119018 N/A CLD 23 MLTPL
S10U Microfiltration Sub-Module Part #119071 N/A CLD 23 MLTPL
S10U Microfiltration Sub-Module Part #119072 N/A CLD 23 MLTPL
S10U Microfiltration Sub-Module Part #119073 N/A CLD 23 MLTPL
S10V Microfiltration Module Part #119303 N/A CLD 23 MLTPL
S10V Microfiltration Sub-Module Part# 119103 N/A CLD 23 MLTPL
S10V Microfiltration Sub-Module Part# 119211 N/A CLD 23 MLTPL
S10V Microfiltration Sub-Module Part #119023 N/A CLD 23 MLTPL
S10V Microfiltration Sub-Module Part #119065 N/A CLD 23 MLTPL
S10V Microfiltration Sub-Module Part #119066 N/A CLD 23 MLTPL
S10V Microfiltration Sub-Module Part #119067 N/A CLD 23 MLTPL
S10V Microfiltration Sub-Module Part #119104 N/A CLD 23 MLTPL
S10V Microfiltration Sub-Module Part #119106 N/A CLD 23 MLTPL

[1] Follow manufacturers use instructions for backwashing after periods in ''standby'' mode.
    Certification includes modules only.
[2] 4 S10T (Part# 119035) is a 4-pack of four #119005 modules in one box.

Ultrafiltration Devices
20N R2 Ultrafiltration Module Part # 120562[1] [3] N/A CLD 23 MLTPL
AML40 MK2 Module Assembly[4] [5] 8" x 75.5" CLD 23 MLTPL
AM 32L20 Rack / 119244[6] [7] 28" x 99" x 66" CLD 23 MLTPL
AM 65L20 rack  / 119241[8] [9] 31" x 95" x 101" CLD 23 MLTPL
AM L40N-2 Module Assembly / 111093[4] [5] 8" x 85.4" CLD 23 MLTPL
AM L40N-3 Module Assembly / 111094[4] [5] 8" x 85.4" CLD 23 MLTPL
AM L40N-4 Module Assembly/ 111095[4] [5] 8" x 85.4" CLD 23 MLTPL
B40N Module Part # 118182, 118247, 118317, 118329[10] [11] 20.3 x 160 cm CLD 23 MLTPL
B40N-L Module Part # 118324[10] [11] 20.3 x 200 cm CLD 23 MLTPL
B50N Module Part # 118322[10] [11] 20.3 x 200 cm CLD 23 MLTPL
CPII MemRACK® Assembly[12] [13] 24.4" x 85.1" CLD 23 MLTPL
CSII ASSEMBLY BASE UNIT / 119234[12] [14] 12" x 12" x 95" CLD 23 MLTPL
CSII MemRACK® Assembly[12] [14] 12" x 12" x 95" CLD 23 MLTPL
CSII MemRACK® Assembly[12] [14] 12" x 12" x 95" CLD 23 MLTPL
CSII MemRACK® Assembly[8] [9] 31" x 95" x 101" CLD 23 MLTPL
CSII MemRACK® Assembly[6] [7] 28" x 99" x 66" CLD 23 MLTPL
Filtrate Cup P6N-120461[6] [7] 4" x 38" CLD 23 MLTPL
IntegraTec™ N 42 – L20N v2 / 120285[4] 4.7" x 70.9" CLD 23 MLTPL
IntegraTec™ N 68 – L40N v2 / 120492[4] [5] 8" x 85.4" CLD 23 MLTPL
K-3893 Rack Components[12] [14] 12" x 12" x 95" CLD 23 MLTPL
L10N Ultrafiltration Module Part# 120406[1] [2] N/A CLD 23 MLTPL
L10N Ultrafiltration Module Part # 111063[1] [2] N/A CLD 23 MLTPL
L10N Ultrafiltration Module Part # 111315[1] [2] N/A CLD 23 MLTPL
L10N Ultrafiltration Module Part # 120283[1] [2] N/A CLD 23 MLTPL
L20N Ultrafiltration Module Part# 120557[1] [3] N/A CLD 23 MLTPL
L20N Ultrafiltration Module Part# 120408[1] [2] N/A CLD 23 MLTPL
L20N Ultrafiltration Module Part # 111062[1] [2] N/A CLD 23 MLTPL
L20N Ultrafiltration Module Part # 111086[1] [2] N/A CLD 23 MLTPL
L20N Ultrafiltration Module Part # 120285[1] [2] N/A CLD 23 MLTPL
L40N Module / 120452[4] [5] 7.3" x 71.7" CLD 23 MLTPL
L40N Module / 120505[4] [5] 7.3" x 71.7" CLD 23 MLTPL
L40N R2 Module / 120560 [4] [5] 7.3" x 71.7" CLD 23 MLTPL
L40N v2 Module / 120535[4] [5] 7.3" x 71.7" CLD 23 MLTPL
L40N v2 Module / 120550[4] [5] 7.3" x 71.7" CLD 23 MLTPL
L40N Module /120492[5] [15] 7.3" x  71.7" CLD 23 MLTPL
L40N Module / 120309 [5] [15] 7.3" x  71.7" CLD 23 MLTPL
L40N Module Housing & Rack Assembly / 111066 [12] [13] 24.4" x 85.1" CLD 23 MLTPL
MBR MemRACK[10] [11] N/A CLD 23 MLTPL
P6N Ultra filtration module Part # 120458[16] [17] 4" x 38" CLD 23 MLTPL
S10N R2 Ultrafiltration Module Part # 119466[1] [3] N/A CLD 23 MLTPL
S10N Ultrafiltration Module Part # 119211[1] [2] N/A CLD 23 MLTPL
S10N Ultrafiltration Module Part # 119212 [1] [2] N/A CLD 23 MLTPL
S10N Ultrafiltration Module Part # 119221[1] [2] N/A CLD 23 MLTPL
S10N Ultrafiltration Module Part # 119222 [1] [2] N/A CLD 23 MLTPL

[1] Follow manufacturers use instructions for backwashing after periods in ''standby'' mode.
    Certification includes modules only.
[2] 4 S10T (Part# 119035) is a 4-pack of four #119005 modules in one box.
[3] Certified for a minimum daily permeate generation of 8,182 L for use in public water
    treatment facilities.
[4] Product is pre-flushed at 5 gallons per minute for 2 hours with chlorine CIP wash
[5] Certified for a minimum daily flow of 40,200 L.
[6] Certified for a minimum daily flow of 668,160 liters.
[7] Product to be flushed at 160 gpm for 2 hours using Chlorine CIP to sanitize system and
    piping prior to use.
[8] Certified for a minimum daily flow of 1,357,200 liters.
[9] Product to be flushed at 325 gpm for 2 hours using Chlorine CIP to sanitize system and
    piping prior to use.
[10] B40N Module Part # 118182, 118247, 118317, 118329 is certified for a minimum daily
     permeate generation of 9,600 L.
     
     B50N-L Module Part # 118324 is certified for a minimum daily permeate generation of
     12,000 L.
     
     B50N Module Part # 118322 is certified for a minimum daily permeate generation of 12,000
     L.
     
     MBR MemRACK is certified for a minimum daily permeate generation of 9,600 L.
[11] B40N Module Part # 118182, 118247, 118317, 118329 requires a pre-service flush at 14
     liters per minute for 20 minutes using tap or influent* water.
     
     B50N-L Module Part # 118324 and B50N Module Part # 118322 require a pre-service flush at
     17 liters per minute for 20 minutes using tap or influent* water.
     
     *If using influent water for the initial flush, follow the flush by disinfecting with a
     1,000 ppm chlorine (NaOCl) solution for 2 hours followed by a 20 minute flush to waste.
[12] Certified for a minimum daily flow of 80,400 liters per day
[13] Product to be flushed at 10.3 gallon per minute for 2 hours using Chlorine CIP to
     sanitize system and piping prior to use.
[14] Product to be flushed at 20 gallon per minute for 2 hours using Chlorine CIP to sanitize
     system and piping prior to use.
[15] Product is pre-flushed for 2 hours with chlorine CIP wash to sanitize system.
[16] Certified for a minimum of 6,000 liters per day.
[17] Product to be flushed at 1.5 gallons per minute for 2 hours.



 
Dwyer Instruments, Inc. 
102 Indiana Highway 212
Michigan City, IN 46360 
United States 
219-879-8868
Visit this company's website


Facility : Michigan City, IN

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Switches/Sensors
IEF-XY-Z-OPT[1] 1" x 15" CLD 23 MLTPL

[1] This sensor will be used in pipe sizes of 4 inches in diameter and greater.
    IEF-XY-Z-OPT
    X   - Accuracy rating (Any letter A-Z)
    Y   - Process connection (Any letter A-Z)
    Z   - Electrical connection (Any alphanumeric sequence)
    OPT - Options (Any alphanumeric sequence – pertains to non-wetted components that do not
    
          impact Certification (i.e. electrical connections, pressure ranges, display, 
          communication protocol) 
    NW  - NSF Certified
    
    NSF Certified models do not include brass valve, fitting, or pipe.



 
E3 EXIM LLP 
Plot # 1, Shop 2, Nr. V Exp and
TCI Freight Off, Koproli Village PO Koproli 
PO Koproli, Raigarh 
Uran, MM 400702 
India 
91 941 7266551
Visit this company's website


Facility : # 1 China

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Reverse Osmosis Element[1] [2] [3]
FOUL-400 8" x 40" CLD 23 MLTPL
FOUL-4040 4" x 40" CLD 23 MLTPL

[1] Size is expressed as Diameter x length.
[2] BR3-400, LOW3-400, LOW2-4040,models are Certified for a minimum daily flow of 10,000
    gallons.
    FOUL-400,LOW2-400 ,BR5-400 models are Certified for a minimum daily flow of 10,500
    gallons.
    LOW3-4040, LOW2-4040 models are Certified for a minimum daily flow of 2,600 gallons.
    LOW4-440 model is Certified for a minimum daily flow of 12,500 gallons.
    SEA5-400 model is Certified for a minimum daily flow of 6,500 gallons.
    LOW4 XL-4040 model is Certified for a minimum daily flow of 2,700 gallons.
    FOUL-4040 model is Certified for a minimum daily flow of 2,000 gallons.
    SEA-4040 model is Certified for a minimum daily flow of 1,500 gallons.
    BR2-4040HR, BR2-4040 models are Certified for a minimum daily flow of 2,400 gallons.
[3] All models 4” in diameter require a 4 gpm flush for 24 hours using tap water.
    All models 8” in diameter require a 15 gpm flush for 24 hours using tap water.



 
EagleBurgmann Industries LP 
10035 Brookriver Drive
Houston, TX 77040 
United States 
713-939-9515
Visit this company's website


Facility : Houston, TX

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Mechanical Seal[1] [G]
BT-FN[2] 10 - 40 mm C. HOT MLTPL

[1] The sizes indicated at the shaft sizes. Mechanical seals are Certified for use in pumps
    with end connections 1/2-inch diameter and greater.
[2] Trade name: BT-FN
    Model Name: [X]-V2BPGG-[Y]
    
    [X]: Non-wetted components denoted by alphanumeric codes
    [Y]: Seal Size
    V2: Alumina Oxide Ceramic Seal Face
    B: Carbon Graphite Resin Seat
    P: NBR Elastomer Parts
    G: CrNiMo Steel Metal Parts
[3] Model Naming Nomenclature:
    Cartex
    Model Name-X/Y, ABCDE
    
    [X] - Non-wetted components denoted by alphanumeric codes
    [Y] - Seal Size
    [A] - Represents the seal face: (Q1) Silicon Carbide, (B) Carbon Graphite Resin
    [B] - Represents the Seat Material: (Q1) Silicon Carbide
    [C] - Represent the secondary Seal: (U1) Perfluorocarbon rubber/PTFE
    [D] - Spring: (M) Hastelloy C-4
    [E] - Metal Parts: (G) CrNiMo Steel
    
    emG,
    Model Name-X/Y, ABCD
    
    [X] - Non-wetted components denoted by alphanumeric codes
    [Y] - Seal Size
    [A] - Represents the seal face: (eSiC-q7): Silicon Carbide, (B) Carbon Graphite Resin 
          impregnated
    [B] - Represents the Seat Material: (eSiC-Q7,Q1) Silicon Carbide
    [C] - Represent the Elastomer: (E) EPDM
    [D] - Metal Parts: (G) CrNiMo Steel
    
    MG9
    Model Name-X/Y, ABCD
    
    [X] - Non-wetted components denoted by alphanumeric codes
    [Y] - Seal Size
    [A] - Represents the seal face: (Q1): Silicon Carbide, (B) Carbon Graphite Resin 
          impregnated
    [B] - Represents the Seat Material: (Q1,Q2) Silicon Carbide
    [C] - Represent the Elastomer: (E) EPDM
    [D] - Metal Parts: (G) CrNiMo Steel
    
    M7
    Model name - X/Y, ABCDEFGH
    
    [X] - Non-wetted components denoted by alphanumeric codes
    [Y] - Seal Size
    [A] - Represents the seal face: (Q1,Q2) Silicon Carbide, (B) Carbon Graphite Resin 
          impregnated
    [B] - Represents the Seat G9: (B) Carbon Graphite Resin Impregnated
    [C] - Represent the G4: (Q1,Q2) Silicon Carbide
    [D] - Represent the G6: (Q1,Q2) Silicon Carbide
    [E] - Represent the G13: (B) Carbon Graphite Resin Impregnated (B)
    [F] - Represents the Secondary Seal: (E) EPDM, (P) NBR, (V) FKM
    [G] - Represents the Spring Material : (G) CrNiMo Steel
    [H] - Represents Meal Parts: (G) CrNiMo steel
[4] Certification includes the Cartex water grade model.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



 
Eastern Foundry & Fittings Inc. 
10 Brodie Drive
Unit #1 
Richmond Hill, ON L4B 3K8 
Canada 
877-668-1288 
905-883-6869
Visit this company's website


Facility : Zhejiang, China

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Valves[G]
502100LF 2" Press x 2" Press Elbow 3/8" - 2" C. HOT MLTPL
502109LF 2" Press x 1 1/2" Press Elbow 3/8" - 2" C. HOT MLTPL
502144LF 1/2" Press x 1/2" Press Elbow 3/8" - 2" C. HOT MLTPL
502164LF 3/4" Press x 1/2" Press Elbow 3/8" - 2" C. HOT MLTPL
502166LF 3/4" Press x 3/4" Press Elbow 3/8" - 2" C. HOT MLTPL
502176LF 1" Press x 3/4" Press Elbow 3/8" - 2" C. HOT MLTPL
502177LF 1" Press x 1" Press Elbow 3/8" - 2" C. HOT MLTPL
502187LF 1 1/4" Press x 1" Press Elbow 3/8" - 2" C. HOT MLTPL
502188LF 1-1/4" Press x 1-1/4" Press Elbow 3/8" - 2" C. HOT MLTPL
502198LF 1 1/2" Press x 1 1/4" Press Elbow 3/8" - 2" C. HOT MLTPL
502199LF 1-1/2" Press x 1-1/2" Press Elbow 3/8" - 2" C. HOT MLTPL
502244LF 1/2" Press x 1/2" MPT Elbow 3/8" - 2" C. HOT MLTPL
502246LF 1/2" Press x 3/4" MPT Elbow 3/8" - 2" C. HOT MLTPL
502264LF 3/4" Press x 1/2" MPT Elbow 3/8" - 2" C. HOT MLTPL
502266LF 3/4" Press x 3/4" MPT Elbow 3/8" - 2" C. HOT MLTPL
502267LF 3/4" Press x 1" MPT Elbow 3/8" - 2" C. HOT MLTPL
502276LF 1" Press x 3/4" MPT Elbow 3/8" - 2" C. HOT MLTPL
502277LF 1" Press x 1" MPT Elbow 3/8" - 2" C. HOT MLTPL
502344LF 1/2" Press x 1/2" FPT With Ear Elbow 3/8" - 2" C. HOT MLTPL
502346LF 1/2" Press x 3/4" FPT With Ear Elbow 3/8" - 2" C. HOT MLTPL
502364LF 3/4" Press x 1/2" FPT With Ear Elbow 3/8" - 2" C. HOT MLTPL
502366LF 3/4" Press x 3/4" FPT With Ear Elbow 3/8" - 2" C. HOT MLTPL
502367LF 3/4" Press x 1" FPT With Ear Elbow 3/8" - 2" C. HOT MLTPL
502376LF 1" Press x 3/4" FPT With Ear Elbow 3/8" - 2" C. HOT MLTPL
502377LF 1" Press x 1" FPT With Ear Elbow 3/8" - 2" C. HOT MLTPL
502744LF 1/2" Press x 1/2" Pex Elbow 3/8" - 2" C. HOT MLTPL
502746LF 1/2" Press x 3/4" Pex Elbow 3/8" - 2" C. HOT MLTPL
502764LF 3/4" Press x 1/2" Pex Elbow 3/8" - 2" C. HOT MLTPL
502765LF 3/4" Press x 5/8" Pex Elbow 3/8" - 2" C. HOT MLTPL
502766LF 3/4" Press x 3/4" Pex Elbow 3/8" - 2" C. HOT MLTPL
502767LF 3/4" Press x 1" Pex Elbow 3/8" - 2" C. HOT MLTPL
502776LF 1" Press x 3/4" Pex Elbow 3/8" - 2" C. HOT MLTPL
502777LF 1" Press x 1" Pex Elbow 3/8" - 2" C. HOT MLTPL
502844LF 1/2" Press x 1/2"F1960 Elbow 3/8" - 2" C. HOT MLTPL
502846LF 1/2" Press x 3/4"F1960 Elbow 3/8" - 2" C. HOT MLTPL
502864LF 3/4" Press x 1/2"F1960 Elbow 3/8" - 2" C. HOT MLTPL
502865LF 3/4" Press x 5/8"F1960 Elbow 3/8" - 2" C. HOT MLTPL
502866LF 3/4" Press x 3/4"F1960 Elbow 3/8" - 2" C. HOT MLTPL
502867LF 3/4" Press x 1"F1960 Elbow 3/8" - 2" C. HOT MLTPL
502876LF 1" Press x 3/4"F1960 Elbow 3/8" - 2" C. HOT MLTPL
502877LF 1" Press x 1"F1960 Elbow 3/8" - 2" C. HOT MLTPL
503100LF 2" Press x 2" Press Coupling 3/8" - 2" C. HOT MLTPL
503107LF 2" Press x 1" Press Adapter 3/8" - 2" C. HOT MLTPL
503108LF 2" Press x 1 1/4" Press Adapter 3/8" - 2" C. HOT MLTPL
503109LF 2" Press x 1 1/2" Press Adapter 3/8" - 2" C. HOT MLTPL
503144LF 1/2" Press x 1/2" Press Coupling 3/8" - 2" C. HOT MLTPL
503164LF 3/4" Press x 1/2" Press Adapter 3/8" - 2" C. HOT MLTPL
503166LF 3/4" Press x 3/4" Press Coupling 3/8" - 2" C. HOT MLTPL
503174LF 1" Press x 1/2" Press Adapter 3/8" - 2" C. HOT MLTPL
503176LF 1" Press x 3/4" Press Adapter 3/8" - 2" C. HOT MLTPL
503177LF 1" Press x 1" Press Coupling 3/8" - 2" C. HOT MLTPL
503184LF 1 1/4" Press x 1/2" Press Adapter 3/8" - 2" C. HOT MLTPL
503186LF 1 1/4" Press x 3/4" Press Adapter 3/8" - 2" C. HOT MLTPL
503187LF 1 1/4" Press x 1" Press Adapter 3/8" - 2" C. HOT MLTPL
503188LF 1-1/4" Press x 1-1/4" Press Coupling 3/8" - 2" C. HOT MLTPL
503196LF 1 1/2" Press x 3/4" Press Adapter 3/8" - 2" C. HOT MLTPL
503197LF 1 1/2" Press x 1" Press Adapter 3/8" - 2" C. HOT MLTPL
503198LF 1 1/2" Press x 1 1/4" Press Adapter 3/8" - 2" C. HOT MLTPL
503199LF 1-1/2" Press x 1-1/2" Press Coupling 3/8" - 2" C. HOT MLTPL
503200LF 2" Press x 2" Male FTG Adapter 3/8" - 2" C. HOT MLTPL
503209LF 2" Press x 1 1/2" Male FTG Adapter 3/8" - 2" C. HOT MLTPL
503244LF 1/2" Press x 1/2" Male FTG Adapter 3/8" - 2" C. HOT MLTPL
503246LF 1/2" Press x 3/4" Male FTG Adapter 3/8" - 2" C. HOT MLTPL
503264LF 3/4" Press x 1/2" Male FTG Adapter 3/8" - 2" C. HOT MLTPL
503266LF 3/4" Press x 3/4" Male FTG Adapter 3/8" - 2" C. HOT MLTPL
503267LF 3/4" Press x 1" Male FTG Adapter 3/8" - 2" C. HOT MLTPL
503276LF 1" Press x 3/4" Male FTG Adapter 3/8" - 2" C. HOT MLTPL
503277LF 1" Press x 1" Male FTG Adapter 3/8" - 2" C. HOT MLTPL
503278LF 1" Press x 1 1/4" Male FTG Adapter 3/8" - 2" C. HOT MLTPL
503287LF 1 1/4" Press x 1" Male FTG Adapter 3/8" - 2" C. HOT MLTPL
503288LF 1 1/4" Press x 1 1/4" Male FTG Adapter 3/8" - 2" C. HOT MLTPL
503289LF 1 1/4" Press x 1 1/2" Male FTG Adapter 3/8" - 2" C. HOT MLTPL
503290LF 1 1/2" Press x 2" Male FTG Adapter 3/8" - 2" C. HOT MLTPL
503298LF 1 1/2" Press x 1 1/4" Male FTG Adapter 3/8" - 2" C. HOT MLTPL
503299LF 1 1/2" Press x 1-1/2"Male FTG Adapter 3/8" - 2" C. HOT MLTPL
503300LF 2" Press x 2" Female FTG Adapter 3/8" - 2" C. HOT MLTPL
503309LF 2" Press x 1 1/2" Female FTG Adapter 3/8" - 2" C. HOT MLTPL
503344LF 1/2" Press x 1/2" Female FTG Adapter 3/8" - 2" C. HOT MLTPL
503346LF 1/2" Press x 3/4" Female FTG Adapter 3/8" - 2" C. HOT MLTPL
503364LF 3/4" Press x 1/2" Female FTG Adapter 3/8" - 2" C. HOT MLTPL
503366LF 3/4" Press x 3/4" Female FTG Adapter 3/8" - 2" C. HOT MLTPL
503367LF 3/4" Press x 1" Female FTG Adapter 3/8" - 2" C. HOT MLTPL
503376LF 1" Press x 3/4" Female FTG Adapter 3/8" - 2" C. HOT MLTPL
503377LF 1" Press x 1" Female FTG Adapter 3/8" - 2" C. HOT MLTPL
503378LF 1" Press x 1 1/4" Female FTG Adapter 3/8" - 2" C. HOT MLTPL
503387LF 1 1/4" Press x 1" Female FTG Adapter 3/8" - 2" C. HOT MLTPL
503388LF 1 1/4" Press x 1 1/4" Female FTG Adapter 3/8" - 2" C. HOT MLTPL
503389LF 1 1/4" Press x 1 1/2" Female FTG Adapter 3/8" - 2" C. HOT MLTPL
503390LF 1 1/2" Press x 2" Female FTG Adapter 3/8" - 2" C. HOT MLTPL
503398LF 1 1/2" Press x 1 1/4" Female FTG Adapter 3/8" - 2" C. HOT MLTPL
503399LF 1 1/2" Press x 1 1/2" Female FTG Adapter 3/8" - 2" C. HOT MLTPL
503500LF 2" Press x 2" PEX Adapter 3/8" - 2" C. HOT MLTPL
503544LF 1/2" Press x 1/2" PEX Adapter 3/8" - 2" C. HOT MLTPL
503546LF 1/2" Press x 3/4" Pex Adapter 3/8" - 2" C. HOT MLTPL
503564LF 3/4" Press x 1/2" Pex Adapter 3/8" - 2" C. HOT MLTPL
503565LF 3/4" Press x 5/8" Pex Adapter 3/8" - 2" C. HOT MLTPL
503566LF 3/4" Press x 3/4" PEX Adapter 3/8" - 2" C. HOT MLTPL
503567LF 3/4" Press x 1" Pex Adapter 3/8" - 2" C. HOT MLTPL
503576LF 1" Press x 3/4" Pex Adapter 3/8" - 2" C. HOT MLTPL
503577LF 1" Press x 1" PEX Adapter 3/8" - 2" C. HOT MLTPL
503588LF 1-1/4" Press x 1-1/4" PEX Adapter 3/8" - 2" C. HOT MLTPL
503599LF 1-1/2" Press x 1-1/2" PEX Adapter 3/8" - 2" C. HOT MLTPL
503600LF 2" Press x 2" EXP. PEX Adapter 3/8" - 2" C. HOT MLTPL
503644LF 1/2" Press x 1/2" F1960 Adapter 3/8" - 2" C. HOT MLTPL
503646LF 1/2" Press x 3/4"F1960 Adapter 3/8" - 2" C. HOT MLTPL
503664LF 3/4" Press x 1/2"F1960 Adapter 3/8" - 2" C. HOT MLTPL
503665LF 3/4" Press x 5/8"F1960 Adapter 3/8" - 2" C. HOT MLTPL
503666LF 3/4" Press x 3/4" F1960 Adapter 3/8" - 2" C. HOT MLTPL
503667LF 3/4" Press x 1"F1960 Adapter 3/8" - 2" C. HOT MLTPL
503676LF 1" Press x 3/4"F1960 Adapter 3/8" - 2" C. HOT MLTPL
503677LF 1" Press x 1" F1960 Adapter 3/8" - 2" C. HOT MLTPL
503688LF 1-1/4" Press x 1-1/4" EXP. PEX Adapter 3/8" - 2" C. HOT MLTPL
503699LF 1-1/2" Press x 1-1/2" EXP. PEX Adapter 3/8" - 2" C. HOT MLTPL
504000LF 2" Press x 2" MPT Adapter 3/8" - 2" C. HOT MLTPL
504009LF 2" Press x 1 1/2" MPT Adapter 3/8" - 2" C. HOT MLTPL
504044LF 1/2" Press x 1/2" MPT Adapter 3/8" - 2" C. HOT MLTPL
504046LF 1/2" Press x 3/4" MPT Adapter 3/8" - 2" C. HOT MLTPL
504064LF 3/4" Press x 1/2" MPT Adapter 3/8" - 2" C. HOT MLTPL
504066LF 3/4" Press x 3/4" MPT Adapter 3/8" - 2" C. HOT MLTPL
504067LF 3/4" Press x 1" MPT Adapter 3/8" - 2" C. HOT MLTPL
504076LF 1" Press x 3/4" MPT Adapter 3/8" - 2" C. HOT MLTPL
504077LF 1" Press x 1" MPT Adapter 3/8" - 2" C. HOT MLTPL
504078LF 1" Press x 1 1/4" MPT Adapter 3/8" - 2" C. HOT MLTPL
504087LF 1 1/4" Press x 1" MPT Adapter 3/8" - 2" C. HOT MLTPL
504088LF 1-1/4" Press x 1-1/4" MPT Adapter 3/8" - 2" C. HOT MLTPL
504089LF 1 1/4" Press x 1 1/2" MPT Adapter 3/8" - 2" C. HOT MLTPL
504090LF 1 1/2" Press x 2" MPT Adapter 3/8" - 2" C. HOT MLTPL
504098LF 1 1/2" Press x 1 1/4" MPT Adapter 3/8" - 2" C. HOT MLTPL
504099LF 1-1/2" Press x 1-1/2" MPT Adapter 3/8" - 2" C. HOT MLTPL
505144LF 1/2" Press x 1/2" NPSM Brass Swivel Adapter 3/8" - 2" C. HOT MLTPL
505146LF 1/2" Press x 3/4" NPSM Brass Swivel Adapter 3/8" - 2" C. HOT MLTPL
505166LF 3/4" Press x 3/4" NPSM Brass Swivel Adapter 3/8" - 2" C. HOT MLTPL
505200LF 2" Press x 2" FPT Adapter 3/8" - 2" C. HOT MLTPL
505209LF 2" Press x 1 1/2" FPT Adapter 3/8" - 2" C. HOT MLTPL
505244LF 1/2" Press x 1/2" FPT Adapter 3/8" - 2" C. HOT MLTPL
505246LF 1/2" Press x 3/4" FPT Adapter 3/8" - 2" C. HOT MLTPL
505264LF 3/4" Press x 1/2" FPT Adapter 3/8" - 2" C. HOT MLTPL
505266LF 3/4" Press x 3/4" FPT Adapter 3/8" - 2" C. HOT MLTPL
505267LF 3/4" Press x 1"FPT Adapter 3/8" - 2" C. HOT MLTPL
505276LF 1" Press x 3/4" FPT Adapter 3/8" - 2" C. HOT MLTPL
505277LF 1" Press x 1" FPT Adapter 3/8" - 2" C. HOT MLTPL
505278LF 1" Press x 1 1/4" FPT Adapter 3/8" - 2" C. HOT MLTPL
505287LF 1 1/4" Press x 1" FPT Adapter 3/8" - 2" C. HOT MLTPL
505288LF 1-1/4" Press x 1-1/4" FPT Adapter 3/8" - 2" C. HOT MLTPL
505289LF 1 1/4" Press x 1 1/2" FPT Adapter 3/8" - 2" C. HOT MLTPL
505290LF 1 1/2" Press x 2" FPT Adapter 3/8" - 2" C. HOT MLTPL
505298LF 1 1/2" Press x 1 1/4" FPT Adapter 3/8" - 2" C. HOT MLTPL
505299LF 1-1/2" Press x 1-1/2" FPT Adapter 3/8" - 2" C. HOT MLTPL
506000LF 2" Press Cap 3/8" - 2" C. HOT MLTPL
506004LF 1/2" Press Cap 3/8" - 2" C. HOT MLTPL
506006LF 3/4" Press Cap 3/8" - 2" C. HOT MLTPL
506007LF 1" Press Cap 3/8" - 2" C. HOT MLTPL
506008LF 1 1/4" Press Cap 3/8" - 2" C. HOT MLTPL
506009LF 1 1/2" Press Cap 3/8" - 2" C. HOT MLTPL
506144LF 1/2" Press x 1/2" NPSM Plastic Swivel Adapter 3/8" - 2" C. HOT MLTPL
506146LF 1/2" Press x 3/4" NPSM Plastic Swivel Adapter 3/8" - 2" C. HOT MLTPL
506166LF 3/4" Press x 3/4" NPSM Plastic Swivel Adapter 3/8" - 2" C. HOT MLTPL
507103-LF 3/4" FPT x 1/2" FPT x 1/2" Press Tee 3/8" - 2" C. HOT MLTPL
507104-LF 3/4" FPT x 1/2" FPT x 3/4" Press Tee 3/8" - 2" C. HOT MLTPL
508500LF 2" Press x 2" Press x 2" PEX Tee 3/8" - 2" C. HOT MLTPL
508508LF 1-1/4" Press x 1-1/4" PEX Tee 3/8" - 2" C. HOT MLTPL
508509LF 1-1/2" Press x 1-1/2" PEX Tee 3/8" - 2" C. HOT MLTPL
508544LF 1/2" Press x 1/2" Press x 1/2" PEX Tee 3/8" - 2" C. HOT MLTPL
508564LF 3/4" Press x 3/4" Press x 1/2" PEX Tee 3/8" - 2" C. HOT MLTPL
508566LF 3/4" Press x 3/4" Press x 3/4" PEX Tee 3/8" - 2" C. HOT MLTPL
508574LF 1" Press x 1" Press x 1/2" PEX Tee 3/8" - 2" C. HOT MLTPL
508576LF 1" Press x 1" Press x 3/4" PEX Tee 3/8" - 2" C. HOT MLTPL
508577LF 1" Press x 1" Press x 1" PEX Tee 3/8" - 2" C. HOT MLTPL
508584LF 1-1/4" Press x 1-1/4" Press x 1/2" PEX Tee 3/8" - 2" C. HOT MLTPL
508586LF 1-1/4" Press x 1-1/4" Press x 3/4" PEX Tee 3/8" - 2" C. HOT MLTPL
508587LF 1-1/4" Press x 1-1/4" Press x 1" PEX Tee 3/8" - 2" C. HOT MLTPL
508588LF 1-1/4" Press x 1-1/4" Press x 1-1/4" PEX Tee 3/8" - 2" C. HOT MLTPL
508594LF 1-1/2" Press x 1-1/2" Press x 1/2" PEX Tee 3/8" - 2" C. HOT MLTPL
508596LF 1-1/2" Press x 1-1/2" Press x 3/4" PEX Tee 3/8" - 2" C. HOT MLTPL
508597LF 1-1/2" Press x 1-1/2" Press x 1" PEX Tee 3/8" - 2" C. HOT MLTPL
508598LF 1-1/2" Press x 1-1/2" Press x 1-1/4" PEX Tee 3/8" - 2" C. HOT MLTPL
508599LF 1-1/2" Press x 1-1/2" Press x 1-1/2" PEX Tee 3/8" - 2" C. HOT MLTPL
508644LF 1/2" Press x 1/2" Press x 1/2" EXP. PEX Tee 3/8" - 2" C. HOT MLTPL
508664LF 3/4" Press x 3/4" Press x 1/2" EXP. PEX Tee 3/8" - 2" C. HOT MLTPL
508666LF 3/4" Press x 3/4" Press x 3/4" EXP. PEX Tee 3/8" - 2" C. HOT MLTPL
508674LF 1" Press x 1" Press x 1/2" EXP. PEX Tee 3/8" - 2" C. HOT MLTPL
508676LF 1" Press x 1" Press x 3/4" EXP. PEX Tee 3/8" - 2" C. HOT MLTPL
508677LF 1" Press x 1" Press x 1" EXP. PEX Tee 3/8" - 2" C. HOT MLTPL
508684LF 1-1/4" Press x 1-1/4" Press x 1/2" EXP. PEX Tee 3/8" - 2" C. HOT MLTPL
508686LF 1-1/4" Press x 1-1/4" Press x 3/4" EXP. PEX Tee 3/8" - 2" C. HOT MLTPL
508687LF 1-1/4" Press x 1-1/4" Press x 1" EXP. PEX Tee 3/8" - 2" C. HOT MLTPL
508688LF 1-1/4"Press x 1-1/4" Press x 1-1/4" EXP. PEX Tee 3/8" - 2" C. HOT MLTPL
508694LF 1-1/2" Press x 1-1/2" Press x 1/2" EXP. PEX Tee 3/8" - 2" C. HOT MLTPL
508696LF 1-1/2" Press x 1-1/2" Press x 3/4" EXP. PEX Tee 3/8" - 2" C. HOT MLTPL
508697LF 1-1/2" Press x 1-1/2" Press x 1" EXP. PEX Tee 3/8" - 2" C. HOT MLTPL
508698LF 1-1/2"Press x 1-1/2" Press x 1-1/4" EXP. PEX Tee 3/8" - 2" C. HOT MLTPL
508699LF 1-1/2"Press x 1-1/2" Press x 1-1/2" EXP. PEX Tee 3/8" - 2" C. HOT MLTPL
509009LF 2" Press x 2" Press x 1 1/2" Press Tee 3/8" - 2" C. HOT MLTPL
509009LF 2" Press x 2" Press x 2" Press Tee 3/8" - 2" C. HOT MLTPL
509090LF 2" Press x 1 1/2" Press x 2" Press Tee 3/8" - 2" C. HOT MLTPL
509099LF 2" Press x 1 1/2" Press x 1 1/2" Press Tee 3/8" - 2" C. HOT MLTPL
509444LF 1/2" Press x 1/2" Press x 1/2" Press Tee 3/8" - 2" C. HOT MLTPL
509446LF 1/2" Press x 1/2" Press x 3/4" Press Tee 3/8" - 2" C. HOT MLTPL
509644LF 3/4" Press x 1/2" Press x 1/2" Press Tee 3/8" - 2" C. HOT MLTPL
509646LF 3/4" Press x 1/2" Press x 3/4" Press Tee 3/8" - 2" C. HOT MLTPL
509664LF 3/4" Press x 3/4" Press x 1/2" Press Tee 3/8" - 2" C. HOT MLTPL
509666LF 3/4" Press x 3/4" Press x 3/4" Press Tee 3/8" - 2" C. HOT MLTPL
509667LF 3/4" Press x 3/4" Press x 1" Press Tee 3/8" - 2" C. HOT MLTPL
509766LF 1" Press x 3/4" Press x 3/4" Press Tee 3/8" - 2" C. HOT MLTPL
509767LF 1" Press x 3/4" Press x 1" Press Tee 3/8" - 2" C. HOT MLTPL
509774LF 1" Press x 1" Press x 1/2" Press Tee 3/8" - 2" C. HOT MLTPL
509776LF 1" Press x 1" Press x 3/4" Press Tee 3/8" - 2" C. HOT MLTPL
509777LF 1" Press x 1" Press x 1" Press Tee 3/8" - 2" C. HOT MLTPL
509778LF 1" Press x 1" Press x 1 1/4" Press Tee 3/8" - 2" C. HOT MLTPL
509877LF 1 1/4" Press x 1" Press x 1" Press Tee 3/8" - 2" C. HOT MLTPL
509878LF 1 1/4" Press x 1" Press x 1 1/4" Press Tee 3/8" - 2" C. HOT MLTPL
509880LF 1 1/4" Press x 1 1/4" Press x 2" Press Tee 3/8" - 2" C. HOT MLTPL
509886LF 1 1/4" Press x 1 1/4" Press x 3/4" Press Tee 3/8" - 2" C. HOT MLTPL
509887LF 1 1/4" Press x 1 1/4" Press x 1" Press Tee 3/8" - 2" C. HOT MLTPL
509888LF 1 1/4" Press x 1 1/4" Press x 1 1/4" Press Tee 3/8" - 2" C. HOT MLTPL
509889LF 1 1/4" Press x 1 1/4" Press x 1 1/2" Press Tee 3/8" - 2" C. HOT MLTPL
509988LF 1 1/2" Press x 1 1/4" Press x 1 1/4" Press Tee 3/8" - 2" C. HOT MLTPL
509989LF 1 1/2" Press x 1 1/4" Press x 1 1/2" Press Tee 3/8" - 2" C. HOT MLTPL
509990LF 1 1/2" Press x 1 1/2" Press x 2" Press Tee 3/8" - 2" C. HOT MLTPL
509998LF 1 1/2" Press x 1 1/2" Press x 1 1/4" Press Tee 3/8" - 2" C. HOT MLTPL
509999LF 1 1/2" Press x 1 1/2" Press x 1 1/2" Press Tee 3/8" - 2" C. HOT MLTPL
50A2144LF 1/2" Press x 1/2" Press 45 Elbow 3/8" - 2" C. HOT MLTPL
50A2166LF 3/4" Press x 3/4" Press 45 Elbow 3/8" - 2" C. HOT MLTPL
50A2177LF 1" Press x 1" Press 45 Elbow 3/8" - 2" C. HOT MLTPL
50A2188LF 1 1/4" Press x 1 1/4" Press 45 Elbow 3/8" - 2" C. HOT MLTPL
50A2199LF 1-1/2"Press x 1-1/2"Press 45 Elbow 3/8" - 2" C. HOT MLTPL
50A2600LF 2" Press x 2" Male FTG 45 Elbow 3/8" - 2" C. HOT MLTPL
50A2644LF 1/2" Press x 1/2" Male FTG 45 Elbow 3/8" - 2" C. HOT MLTPL
50A2666LF 3/4" Press x 3/4" Male FTG 45 Elbow 3/8" - 2" C. HOT MLTPL
50A2677LF 1" Press x 1" Press Male FTG 45 Elbow 3/8" - 2" C. HOT MLTPL
50A2688LF 1 1/4" Press x 1 1/4" Male FTG 45 Elbow 3/8" - 2" C. HOT MLTPL
50A2699LF 1 1/2" Press x 1 1/2" Male FTG 45 Elbow 3/8" - 2" C. HOT MLTPL
50N3100LF 2" Press x 2" Press Repair Coupling 3/8" - 2" C. HOT MLTPL
50N3144LF 1/2" Press x 1/2" Press Repair Coupling 3/8" - 2" C. HOT MLTPL
50N3166LF 3/4" Press x 3/4" Press Repair Coupling 3/8" - 2" C. HOT MLTPL
50N3177LF 1" Press x 1" Press Repair Coupling 3/8" - 2" C. HOT MLTPL
50N3188LF 1 1/4" Press x 1 1/4" Press Repair Coupling 3/8" - 2" C. HOT MLTPL
50N3199LF 1 1/2" Press x 1 1/2" Press Repair Coupling 3/8" - 2" C. HOT MLTPL
519774-LF 1"x1"x1/2" Monoflow Press Tee 3/8" - 2" C. HOT MLTPL
519776-LF 1"x1"x3/4" Monoflow Press Tee 3/8" - 2" C. HOT MLTPL
550A2100LF 2"Press x 2"Press 45 Elbow 3/8" - 2" C. HOT MLTPL
EFF121-01-LF 1/2" Sweat Straight Lead Free Mini Ball Valve 1/4" - 3/4" CLD 23 MLTPL
EFF121-02-LF 1/2" Sweat x 1/4" OD Comp Straight Lead Free Mini Ball Valve 1/4" - 3/4" CLD 23 MLTPL
EFF121-03-LF 1/2" Sweat x 3/8" OD Comp Straight Lead Free Mini Ball Valve 1/4" - 3/4" CLD 23 MLTPL
EFF121-05-LF 5/8" x 1/4" OD Comp Straight Lead Free Mini Ball Valve 1/4" - 3/4" CLD 23 MLTPL
EFF121-06-LF 5/8" x 3/8" OD Comp Straight Lead Free Mini Ball Valve 1/4" - 3/4" CLD 23 MLTPL
EFF121-08-LF 1/2" PEX x 1/4" OD Comp Straight Lead Free Mini Ball Valve 1/4" - 3/4" CLD 23 MLTPL
EFF121-09-LF 1/2" PEX x 3/8" OD Comp Straight Lead Free Mini Ball Valve 1/4" - 3/4" CLD 23 MLTPL
EFF121-10-LF 1/2" PEX Straight Lead Free Mini Ball Valve 1/4" - 3/4" CLD 23 MLTPL
EFF121-11-LF 1/2" PEX x 1/2" Sweat Straight Lead Free Mini Ball Valve 1/4" - 3/4" CLD 23 MLTPL
EFF121-12-LF 3/8" FPT x 3/8" OD Comp Straight Lead-free Mini Ball Valve 1/4" - 3/4" CLD 23 MLTPL
EFF121-13-LF 1/2" FPT x 3/8" OD Comp Straight Lead Free Mini Ball Valve 1/4" - 3/4" CLD 23 MLTPL
EFF121-14-LF 3/8" Swivel x 3/8" OD Comp Straight Retrofit LF Mini Ball Valve 1/4" - 3/4" CLD 23 MLTPL
EFF121-15-LF 1/4" OD Comp Straight Lead Free Mini Ball Valve 1/4" - 3/4" CLD 23 MLTPL
EFF121-17-LF 3/8" OD Comp Straight Lead Free Mini Ball Valve 1/4" - 3/4" CLD 23 MLTPL
EFF121-30S-LF 1/2" Dual Sweat/MIP x 3/4" GHT Straight Lead Free Mini Ball Valve 1/4" - 3/4" CLD 23 MLTPL
EFF121-40S-LF 1/4" MIP x 3/4" GHT Straight Lead Free Mini Ball Valve 1/4" - 3/4" CLD 23 MLTPL
EFF121-41-LF 3/4" Copper x 3/4" GHT Straight Lead Free Mini Ball Valve 1/4" - 3/4" CLD 23 MLTPL
EFF121-61-LF 1/2" PEX x 3/4" GHT Straight Lead Free Mini Ball Valve 1/4" - 3/4" CLD 23 MLTPL
EFF121-62-LF 3/4" PEX x 3/4" GHT Straight Lead Free Mini Ball Valve 1/4" - 3/4" CLD 23 MLTPL
EFF121-81-LF 1/2" F1807 x 1/2" NPSM with Plastic Nut Mini Ball Valve 1/4" - 3/4" CLD 23 MLTPL
EFF122-01-LF 1/2" Sweat Angled Lead Free Mini Valve 1/4" - 3/4" CLD 23 MLTPL
EFF122-02-LF 1/2" Sweat x 1/4" OD Comp Angled Lead-free Mini Valve 1/4" - 3/4" CLD 23 MLTPL
EFF122-03-LF 1/2" Sweat x 3/8" OD Comp Angled Lead Free Mini Valve 1/4" - 3/4" CLD 23 MLTPL
EFF122-04-LF 1/2" Sweat x 5/8" OD Comp Angled Lead Free Mini Valve 1/4" - 3/4" CLD 23 MLTPL
EFF122-05-LF 5/8" x 1/4" OD Comp Angled Lead Free Mini Valve 1/4" - 3/4" CLD 23 MLTPL
EFF122-06-LF 5/8" x 3/8" OD Comp Angled Lead Free Mini Valve 1/4" - 3/4" CLD 23 MLTPL
EFF122-08-LF 1/2" PEX x 1/4" OD Comp Angled Lead Free Mini Valve 1/4" - 3/4" CLD 23 MLTPL
EFF122-09-LF 1/2" PEX x 3/8" OD Comp Angled Lead Free Mini Valve 1/4" - 3/4" CLD 23 MLTPL
EFF122-10-LF 1/2" PEX Angled Lead Free Mini Valve 1/4" - 3/4" CLD 23 MLTPL
EFF122-11-LF 1/2" PEX x Sweat Angled Lead Free Mini Valve 1/4" - 3/4" CLD 23 MLTPL
EFF122-12-LF 3/8" FPT x 3/8" OD Comp Angled Lead-free Mini Valve 1/4" - 3/4" CLD 23 MLTPL
EFF122-13-LF 1/2" FPT x 3/8" OD Comp Angled Lead Free Mini Valve 1/4" - 3/4" CLD 23 MLTPL
EFF122-15-LF 1/4" OD Comp Angled Lead Free Mini Ball Valve 1/4" - 3/4" CLD 23 MLTPL
EFF122-17-LF 3/8" OD Comp Angled Lead-free Mini Valve 1/4" - 3/4" CLD 23 MLTPL
EFF122-25F-LF 1/2" Sweat x 3/4" GHT Angled Lead Free Mini Valve 1/4" - 3/4" CLD 23 MLTPL
EFF122-29S-LF 1/2" PEX x 3/4 GHT Angled Lead Free Mini Valve 1/4" - 3/4" CLD 23 MLTPL
EFF122-29S-LF 1/2" PEX x 3/4 GHT Angled Lead Free Mini Valve 1/4" - 3/4" CLD 23 MLTPL
EFF122-30S-CH-LF 1/2" Dual Sweat/MIP x 3/4 GHT Angled LF Mini V w/ Cap & Chain 1/4" - 3/4" CLD 23 MLTPL
EFF122-30S-LF 1/2" Dual Sweat/MIP x 3/4 GHT Angled Lead Free Mini Valve 1/4" - 3/4" CLD 23 MLTPL
EFF122-41-LF 3/4" Copper x 3/4" GHT Angled Lead Free Mini Ball Valve 1/4" - 3/4" CLD 23 MLTPL
EFF122-61-LF 1/2" PEX x 3/4" GHT Angled Lead Free Mini Ball Valve 1/4" - 3/4" CLD 23 MLTPL
EFF122-62-CH-LF 3/4" PEX x 3/4" GHT Angled Lead Free Mini BV w/ Cap & Chain 1/4" - 3/4" CLD 23 MLTPL
EFF122-62-LF 3/4" PEX x 3/4" GHT Angled Lead Free Mini Ball Valve 1/4" - 3/4" CLD 23 MLTPL
EFF123-02-LF 1/2" x 1/2" PEX x 1/4" OD Comp Lead Free Mini Tee Valve 1/4" - 3/4" CLD 23 MLTPL
EFF123-03-LF 1/2" x 1/2" PEX x 3/8" OD Comp Lead Free Mini Tee Valve 1/4" - 3/4" CLD 23 MLTPL
EFF123-07-LF 5/8 x 5/8" x 1/4" OD Comp Lead Free Mini Tee Valve 1/4" - 3/4" CLD 23 MLTPL
EFF123-08-LF 5/8" x 5/8" x 3/8" OD Comp Lead Free Mini Tee Valve 1/4" - 3/4" CLD 23 MLTPL
EFF123-31-CH-LF 1/2" PEX X 3/4" GHT Lead Free Tee Mini Ball Valve + Cap & Chain 1/4" - 3/4" CLD 23 MLTPL
EFF123-31-LF 1/2" PEX X 3/4" GHT Lead Free Tee Mini Ball Valve 1/4" - 3/4" CLD 23 MLTPL
EFF123-51-CH-LF 3/4" PEX x 3/4" PEX x 3/4" GHT Tee Lead Free Mini Tee Valve 1/4" - 3/4" CLD 23 MLTPL
EFF123-51-LF 3/4" PEX x 3/4" PEX x 3/4" GHT Tee Lead Free Mini Tee Valve 1/4" - 3/4" CLD 23 MLTPL
EFF123-61-CH-LF 3/4" Copper x 3/4" Copper x 3/4" GHT Tee Lead Free Mini Tee V 1/4" - 3/4" CLD 23 MLTPL
EFF123-61-LF 3/4" Copper x 3/4" Copper x 3/4" GHT Tee Lead Free Mini Tee Valve 1/4" - 3/4" CLD 23 MLTPL
EFF123-81-LF 1/2" PEX x3/8" Com x3/8" Com Dual outlet mini ball valve 1/4" - 3/4" CLD 23 MLTPL
EFF123-81-LF 1/2" PEX x3/8" Com x3/8" Com Dual outlet mini ball valve(Angle Tee) 1/4" - 3/4" CLD 23 MLTPL
EFF124-01-LF 1/2" Sweat x 1/2" Sweat Lead Free Balancing Mini Ball Valve 1/4" - 3/4" CLD 23 MLTPL
EFF124-02-LF 3/8" OD Comp x 3/8" OD Comp Lead Free Balancing Mini Ball Valve 1/4" - 3/4" CLD 23 MLTPL
EFF124-03-LF 1/2" PEX x 1/2" PEX Lead Free Balancing Mini Ball Valve 1/4" - 3/4" CLD 23 MLTPL
EFF124-04-LF 1/2" PEX x 1/2" Copper Sweat Lead Free Balancing Mini Ball Valve 1/4" - 3/4" CLD 23 MLTPL
EFF128-02-LF 1/2" Copper x 1/4" OD Comp Loose Key Mini Ball Valve Straight 1/4" - 3/4" CLD 23 MLTPL
EFF128-03-LF 1/2" Copper x 3/8" OD Comp Loose Key Mini Ball Valve Straight 1/4" - 3/4" CLD 23 MLTPL
EFF128-08-LF 1/2" PEX x 1/4" OD Comp Loose Key Mini Ball Valve Straight 1/4" - 3/4" CLD 23 MLTPL
EFF128-09-LF 1/2" PEX x 3/8" OD Comp Loose Key Mini Ball Valve Straight 1/4" - 3/4" CLD 23 MLTPL
EFF128-12-LF 1/2" FIP x 1/4" OD Comp Loose Key Mini Ball Valve Straight 1/4" - 3/4" CLD 23 MLTPL
EFF128-13-LF 1/2" FIP x 3/8" OD Comp Loose Key Mini Ball Valve Straight 1/4" - 3/4" CLD 23 MLTPL
EFF129-02-LF 1/2" Copper x 1/4" OD Comp Loose Key Mini Ball Valve Angled 1/4" - 3/4" CLD 23 MLTPL
EFF129-03-LF 1/2" Copper x 3/8" OD Comp Loose Key Mini Ball Valve Angled 1/4" - 3/4" CLD 23 MLTPL
EFF129-08-LF 1/2" PEX x 1/4" OD Comp Loose Key Mini Ball Valve Angled 1/4" - 3/4" CLD 23 MLTPL
EFF129-09-LF 1/2" PEX x 3/8" OD Comp Loose Key Mini Ball Valve Angled 1/4" - 3/4" CLD 23 MLTPL
EFF129-12-LF 1/2" FIP x 1/4" OD Comp Loose Key Mini Ball Valve Angled 1/4" - 3/4" CLD 23 MLTPL
EFF129-13-LF 1/2" FIP x 3/8" OD Comp Loose Key Mini Ball Valve Angled 1/4" - 3/4" CLD 23 MLTPL
EFF221-08-LF 1/2" F1960 X 1/4" OD Comp Lead Free Straight Mini Ball Valve 1/4" - 3/4" CLD 23 MLTPL
EFF221-09-LF 1/2" F1960 X 3/8" OD Comp Lead Free Straight Mini Ball Valve 1/4" - 3/4" CLD 23 MLTPL
EFF221-62-LF 3/4" F1960 x 3/4" GHT Straight Mini Ball Valve 1/4" - 3/4" CLD 23 MLTPL
EFF221-71-LF 1/2" F Sweat x 1/2" Exp. PEX Mini Ball Valve 1/4" - 3/4" CLD 23 MLTPL
EFF221-72-LF 1/2" F Sweat x 1/2" Exp. PEX Mini Ball Valve 1/4" - 3/4" CLD 23 MLTPL
EFF221-81-LF 1/2 F1960 x 1/2 NPSM Straight Mini Ball Valve 1/4" - 3/4" CLD 23 MLTPL
EFF222-08-LF 1/2" F1960 X 1/4" OD Comp Lead Free Angled Mini Ball Valve 1/4" - 3/4" CLD 23 MLTPL
EFF222-09-LF 1/2" F1960 X 3/8" OD Comp Lead Free Angled Mini Ball Valve 1/4" - 3/4" CLD 23 MLTPL
EFF222-61-LF 1/2" F1960 X 3/4" GHT Lead Free Angled Mini Ball Valve 1/4" - 3/4" CLD 23 MLTPL
EFF222-62-LF 3/4" F1960 X 3/4" GHT Angled Mini Valve 1/4" - 3/4" CLD 23 MLTPL
EFF223-01A-LF 1/2" Exp. PEX x 1/2" Exp. PEX x 1/2" F. Sweat Mini Ball Valve 1/4" - 3/4" CLD 23 MLTPL
EFF223-02-LF 1/2" F1960 X 1/4" OD Comp Lead Free Tee Mini Ball Valve 1/4" - 3/4" CLD 23 MLTPL
EFF223-02A-LF 1/2" Exp. PEX x 1/2" Exp. PEX x1/4" Com Mini Ball Valve(Angle Tee) 1/4" - 3/4" CLD 23 MLTPL
EFF223-03-LF 1/2" F1960 X 3/8" OD Comp Lead Free Tee Mini Ball Valve 1/4" - 3/4" CLD 23 MLTPL
EFF223-03A-LF 1/2" Exp. PEX x1/2" Exp. PEX x 3/8" Com Mini Ball Valve(Angle Tee) 1/4" - 3/4" CLD 23 MLTPL
EFF223-04A-LF 1/2" Exp. PEX x 1/2" Exp. PEX x5/8" Com Mini Ball Valve(Angle Tee) 1/4" - 3/4" CLD 23 MLTPL
EFF223-05A-LF 1/2" Exp. PEX x 1/2" Exp. PEX x 1/2" Exp. PEX Mini Ball Valve 1/4" - 3/4" CLD 23 MLTPL
EFF223-31-CH-LF 1/2" F1960 X 3/4" GHT Lead Free Tee Mini BV + Cap & Chain 1/4" - 3/4" CLD 23 MLTPL
EFF223-31-LF 1/2" F1960 X 3/4" GHT Lead Free Tee Mini Ball Valve 1/4" - 3/4" CLD 23 MLTPL
EFF223-51-CH-LF 3/4" F1960 x 3/4" F1960 x 3/4"GHT Mini Tee BV w/ Cap & Chain 1/4" - 4" CLD 23 MLTPL
EFF223-51-LF 3/4" F1960 x 3/4" F1960 x 3/4"GHT Mini Tee Ball Valve 1/4" - 3/4" CLD 23 MLTPL
EFF223-71-LF 1/2" Exp. PEX x 3/8" Com. Straight Dual outlet Mini Ball Valve 1/4" - 3/4" CLD 23 MLTPL
EFF223-72-LF 1/2" Exp. PEX x 3/8" Com. Angle Dual outlet Mini Ball Valve 1/4" - 3/4" CLD 23 MLTPL
EFF224-03-LF 1/2" F1960 x 1/2" F1960 Lead Free Balancing Mini Ball Valve 1/4" - 3/4" CLD 23 MLTPL
EFF224-04-LF 1/2" F1960 x 1/2" Copper Sweat Lead Free Balancing Mini Ball Valve 1/4" - 3/4" CLD 23 MLTPL
EFF228-08-LF 1/2" F1960 x 1/4" OD Comp Loose Key Mini Ball Valve Straight 1/4" - 3/4" CLD 23 MLTPL
EFF228-09-LF 1/2" F1960 x 3/8" OD Comp Loose Key Mini Ball Valve Straight 1/4" - 3/4" CLD 23 MLTPL
EFF229-08-LF 1/2" F1960 x 1/4" OD Comp Loose Key Mini Ball Valve Angled 1/4" - 3/4" CLD 23 MLTPL
EFF229-09-LF 1/2" F1960 x 3/8" OD Comp Loose Key mini Ball Valve Angled 1/4" - 3/4" CLD 23 MLTPL
EFF230-01-LF 1/2" PEX x 3/8" OD Comp x 3/8" OD Comp straight dual outlet valve 1/4" - 3/4" CLD 23 MLTPL
EFF230-02-LF 1/2" PEX x 3/8" OD Comp x 3/8" OD Comp angle dual outlet stop valve 1/4" - 3/4" CLD 23 MLTPL
EFF321-08-LF 1/2" Press x 1/4" Comp Straight Mini Ball Valve 1/4" - 3/4" CLD 23 MLTPL
EFF321-09-LF 1/2" Press x 3/8" Comp Straight Mini Ball Valve 1/4" - 3/4" CLD 23 MLTPL
EFF321-10-LF 1/2" Press x 1/2" Press Straight Mini Ball Valve 1/4" - 3/4" CLD 23 MLTPL
EFF322-08-LF 1/2" Press x 1/4" Comp Angle Mini Ball Valve 1/4" - 3/4" CLD 23 MLTPL
EFF322-09-LF 1/2" Press x 3/8" Comp Angle Mini Ball Valve 1/4" - 3/4" CLD 23 MLTPL
EFF322-10-LF 1/2" Press x 1/2" Press Angle Mini Ball Valve 1/4" - 3/4" CLD 23 MLTPL
EFFBB-01LF 1/2" Barb x 1/2" Barb Ball Valve 1/4"- 4" CLD 23 MLTPL
EFFBB-02LF 3/4" Barb x 1/2" Barb Ball Valve 1/4"- 4" CLD 23 MLTPL
EFFBB-03LF 1" Barb x 1/2" Barb Ball Valve 1/4"- 4" CLD 23 MLTPL
EFFBD-01-LF 1/2"MPT X 1/2"GHT HOSE BIBB 1/4" - 4" CLD 23 MLTPL
EFFBD-02-LF 3/4"MPT X 3/4"GHT HOSE BIBB 1/4" - 4" CLD 23 MLTPL
EFFBT-01-LF 1/2" MIP/COPPER SWEAT x 3/4" GHT Hose Bibb Lead Free 1/4" - 4" CLD 23 MLTPL
EFFBT-02-LF 3/4" MIP x 3/4" GHT Hose Bibb Lead Free 1/4" - 4" CLD 23 MLTPL
EFFBT-03-LF 1/2" FPT x 3/4" GHT Hose Bibb Lead Free 1/4" - 4" CLD 23 MLTPL
EFFBT-04-LF 3/4" FPT x 3/4" GHT Hose Bibb Lead Free 1/4" - 4" CLD 23 MLTPL
EFFBT-05-LF 1/2" COPPER SWEAT x 3/4" GHT Hose Bibb Lead Free 1/4" - 4" CLD 23 MLTPL
EFFBT-06-LF 3/4" COPPER SWEAT x 3/4" GHT Hose Bibb Lead Free 1/4" - 4" CLD 23 MLTPL
EFFBT-07-LF 1/2" PEX x 3/4" GHT Hose Bibb Lead Free 1/4" - 4" CLD 23 MLTPL
EFFBT-08-LF 3/4" PEX x 3/4" GHT Hose Bibb Lead Free 1/4" - 4" CLD 23 MLTPL
EFFBT-09-LF 1/2" PEX Expansion X 3/4" GHT Hose Bibb Lead Free 1/4" - 4" CLD 23 MLTPL
EFFBT-10-LF 3/4" PEX Expansion x 3/4" GHT Hose Bibb Lead Free 1/4" - 4" CLD 23 MLTPL
EFFBT-21-LF 1/2" MIP/COPPER SWEAT X 3/4"GHT Hose Bibb W/ FLANGE Lead Free 1/4" - 4" CLD 23 MLTPL
EFFBT-22-LF 3/4" MIP x 3/4" GHT Hose Bibb W/ FLANGE Lead Free 1/4" - 4" CLD 23 MLTPL
EFFBT-23-LF 1/2" FPT x 3/4" GHT Hose Bibb W/ FLANGE Lead Free 1/4" - 4" CLD 23 MLTPL
EFFBT-24-LF 3/4" FPT x 3/4" GHT Hose Bibb W/ FLANGE Lead Free 1/4" - 4" CLD 23 MLTPL
EFFBT-25-LF 1/2" COPPER SWEAT x 3/4" GHT Hose Bibb W/ FLANGE Lead Free 1/4" - 4" CLD 23 MLTPL
EFFBT-26-LF 3/4" COPPER SWEAT x 3/4" GHT Hose Bibb W/ FLANGE Lead Free 1/4" - 4" CLD 23 MLTPL
EFFBT-27-LF 1/2" PEX x 3/4" GHT Hose Bibb W/ FLANGE Lead Free 1/4" - 4" CLD 23 MLTPL
EFFBT-28-LF 3/4" PEX x 3/4" GHT Hose Bibb W/ FLANGE Lead Free 1/4" - 4" CLD 23 MLTPL
EFFBT-29-LF 1/2" PEX Expansion x 3/4" GHT Hose Bibb W/ FLANGE Lead Free 1/4" - 4" CLD 23 MLTPL
EFFBT-30-LF 3/4" PEX Expansion x 3/4" GHT Hose Bibb W/ FLANGE Lead Free 1/4" - 4" CLD 23 MLTPL
EFFBT-31-LF 1/2" PEX x 3/4" GHT Quarter Turn Sillcock 1/4" - 4" CLD 23 MLTPL
EFFBT-32-LF 3/4" PEX x 3/4" GHT Quarter Turn Sillcock 1/4" - 4" CLD 23 MLTPL
EFFBT-33-LF 1/2" Exp. PEX x 3/4" GHT Quarter Turn Sillcock 1/4" - 4" CLD 23 MLTPL
EFFC-01-LF 1/2" CxC Full Port Brass Lead Free Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFC-02-LF 3/4" CxC Full Port Brass Lead Free Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFC-03-LF 1" CxC Full Port Brass Lead Free Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFC-04-LF 1-1/4" CxC Full Port Brass Lead Free Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFC-05-LF 1-1/2" CxC Full Port Brass Lead Free Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFC-06-LF 2" CxC Full Port Brass Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFC-07-LF 2-1/2" CxC Full Port Brass Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFC-08-LF 3" CxC Full Port Brass Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFC-09-LF 4" CxC Full Port Brass Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFC-12-LF 1" COPPER X 3/4" COPPER 90 Ball Valve Lead Free 1/4" - 4" CLD 23 MLTPL
EFFC-23-LF 1" COPPER X 1" COPPER 90 Ball Valve Lead Free 1/4" - 4" CLD 23 MLTPL
EFFCC-01-LF 1/2" Compression Full Port Brass Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFCC-02-LF 3/4" Compression Full Port Brass Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFCC-03-LF 1" x 1" Compression Full Port Brass Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFCCD-01-LF 1/4" OD Comp Straight Lead Free Mini Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFCCD-02-LF 3/4" Compression Brass Ball Valve + Drain 1/4" - 4" CLD 23 MLTPL
EFFCCD-03-LF 1" Compression Brass Ball Valve + Drain 1/4" - 4" CLD 23 MLTPL
EFFCCH-01-LF 1/2" Copper x 3/4" NH Lead Free Cap & Chain Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFCCH-02-LF 3/4" Copper x 3/4" NH Lead Free Cap & Chain Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFCCH-03-LF 1" Copper x 3/4" NH Lead Free Cap & Chain Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFCM-01-LF 1/2" Sweat X MPT Full Port Ball Valve Lead Free 1/4" - 4" CLD 23 MLTPL
EFFCM-02-LF 3/4" Sweat X MPT Full Port Ball Valve Lead Free 1/4" - 4" CLD 23 MLTPL
EFFCM-03-LF 1" Sweat X MPT Full Port Ball Valve Lead Free 1/4" - 4" CLD 23 MLTPL
EFFCM-04-LF 1-1/4" Sweat x MPT Full Port Brass Ball Valve w/ 1/4" FIP Side Port 1/4" - 4" CLD 23 MLTPL
EFFCM-05-LF 1-1/2" Sweat x MPT Full Port Brass Ball Valve w/ 1/4" FIP Side Port 1/4" - 4" CLD 23 MLTPL
EFFCM-06-LF 2" Sweat x MPT Full Port Brass Ball Valve w/ 1/4" FIP Side Port 1/4" - 4" CLD 23 MLTPL
EFFCN-12-LF 1" COPPER x 3/4" FIP 90 Ball Valve Lead Free 1/4" - 4" CLD 23 MLTPL
EFFCN-22-LF 3/4" COPPER x 3/4" FIP 90 Ball Valve Lead Free 1/4" - 4" CLD 23 MLTPL
EFFCN-23-LF 1" COPPER x 1" FIP 90 Ball Valve Lead Free 1/4" - 4" CLD 23 MLTPL
EFFCND-13-LF 1" COPPER x 3/4" FIP 90 Ball Valve Lead Free w/ Drain 1/4" - 4" CLD 23 MLTPL
EFFCND-32-LF 3/4" COPPER x 3/4" FIP 90 Ball Valve W/ Drain Lead Free 1/4" - 4" CLD 23 MLTPL
EFFCND-33-LF 1" COPPER x 1" FIP 90 Ball Valve w/ Drain Lead Free 1/4" - 4" CLD 23 MLTPL
EFFCR-01-LF 1/2" NPT Full Port Ball Valve w/ 1/4" FIP Side Port Lead Free 1/4" - 4" CLD 23 MLTPL
EFFCR-02-LF 3/4" NPT Full Port Ball Valve w/ 1/4" FIP Side Port Lead Free 1/4" - 4" CLD 23 MLTPL
EFFCR-03-LF 1" NPT Full Port Ball Valve w/ 1/4" FIP Side Port Lead Free 1/4" - 4" CLD 23 MLTPL
EFFCR-04-LF 1-1/4" NPT Full Port Ball Valve w/ 1/4" FIP Side Port Lead Free 1/4" - 4" CLD 23 MLTPL
EFFCR-05-LF 1-1/2" NPT Full Port Ball Valve w/ 1/4" FIP Side Port Lead Free 1/4" - 4" CLD 23 MLTPL
EFFCR-06-LF 2" NPT Full Port Ball Valve w/ 1/4" FIP Side Port Lead Free 1/4" - 4" CLD 23 MLTPL
EFFCU-01-LF 1/2" PEX Expansion x 1/2" Sweat Brass Lead Free Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFCU-01-P-LF 1/2" x 1/2" Exp. PEX Sweat Brass Lead Free BV w/ Btrfly Hdl 1/4" - 4" CLD 23 MLTPL
EFFCU-02-LF 3/4" PEX Expansion x 3/4" Sweat Brass Lead Free Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFCU-02-P-LF 3/4" Exp. PEX x 3/4" Sweat Brass Lead Free BV w/ Btrfly Hdl 1/4" - 4" CLD 23 MLTPL
EFFCU-03-LF 1" PEX Expansion x 1" Sweat Brass Lead Free Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFCU-03-P-LF 1" Exp. PEX x 1" Sweat Brass Lead Free Ball Valve w/ Btrfly Hdl 1/4" - 4" CLD 23 MLTPL
EFFCU-04-LF 1-1/4" PEX Expansion x 1-1/4" Sweat Brass Lead Free Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFCU-05-LF 1-1/2" PEX Expansion x 1-1/2" Sweat Brass Lead Free Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFCU-06-LF 2" PEX Expansion x 2" Sweat Brass Lead Free Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFCU-07-LF 2-1/2" PEX Expansion x 2-1/2" Sweat Brass Lead Free Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFCU-08-LF 3" PEX Expansion x 3" Sweat Brass Lead Free Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFCU-22-LF 3/4" PEX Expansion x 3/4" Copper 90 Ball Valve Lead Free 1/4" - 4" CLD 23 MLTPL
EFFCU-23-LF 1" PEX Expansion x 1" Copper 90 Ball Valve Lead Free 1/4" - 4" CLD 23 MLTPL
EFFCUD-01-LF 1/2" PEX Expansion x 1/2" Sweat Brass Lead Free Ball Valve + Drain 1/4" - 4" CLD 23 MLTPL
EFFCUD-01-P-LF 1/2" Exp. PEX x 1/2" Sweat Brass Lead Free BV+Drain w/Btrfly Hdl 1/4" - 4" CLD 23 MLTPL
EFFCUD-02-LF 3/4" PEX Expansion x 3/4" Sweat Brass Lead Free Ball Valve + Drain 1/4" - 4" CLD 23 MLTPL
EFFCUD-02-P-LF 3/4" x 3/4" Exp. PEX Sweat Brass Lead Free BV+Drain w/ Btrfly Hdl 1/4" - 4" CLD 23 MLTPL
EFFCUD-03-LF 1" PEX Expansion x 1" Sweat Brass Lead Free Ball Valve + Drain 1/4" - 4" CLD 23 MLTPL
EFFCUD-03-P-LF 1" Exp. PEX x 1" Sweat Brass Lead Free BV + Drain w/ Btrfly Hdl 1/4" - 4" CLD 23 MLTPL
EFFCUD-04-LF 1-1/4" PEX Expansionx1-1/4" Sweat Brass Lead Free Ball Valve+Drain 1/4" - 4" CLD 23 MLTPL
EFFCUD-32-LF 3/4" PEX Expansion x 3/4" Copper 90 Ball Valve W/ Drain Lead Free 1/4" - 4" CLD 23 MLTPL
EFFCUD-33-LF 1" PEX Expansion x 1" Copper 90 Ball Valve w/ Drain Lead Free 1/4" - 4" CLD 23 MLTPL
EFFCV-01-LF 1/2" Sweat X 1/2" FPT Ball Valve w/ 1/4" Side Port Lead Free 1/4" - 4" CLD 23 MLTPL
EFFCV-02-LF 3/4" Sweat X 3/4" FPT Ball Valve w/ 1/4" Side Port Lead Free 1/4" - 4" CLD 23 MLTPL
EFFCV-03-LF 1" Sweat X 1" FPT Ball Valve w/ 1/4" Side Port Lead Free 1/4" - 4" CLD 23 MLTPL
EFFCV-04-LF 1-1/4" Sweat x 1-1/4" FPT Ball Valve w/ 1/4" FIP Side Port 1/4" - 4" CLD 23 MLTPL
EFFCV-05-LF 1-1/2" Sweat x 1-1/2" FPT Ball Valve w/ 1/4" FIP Side Port 1/4" - 4" CLD 23 MLTPL
EFFCV-06-LF 2" Sweat x 2" FPT Ball Valve w/ 1/4" FIP Side Port 1/4" - 4" CLD 23 MLTPL
EFFDC-01-LF 1/2" CxC Full Port Brass Ball Valve + Drain 1/4" - 4" CLD 23 MLTPL
EFFDC-02-LF 3/4" CxC Full Port Brass Ball Valve + Drain 1/4" - 4" CLD 23 MLTPL
EFFDC-03-LF 1" CxC Full Port Brass Ball Valve + Drain 1/4" - 4" CLD 23 MLTPL
EFFDC-13-LF 1" COPPER X 3/4" COPPER 90 Ball Valve w/ Drain Lead Free 1/4" - 4" CLD 23 MLTPL
EFFDC-33-LF 1" COPPER X 1" COPPER 90 Ball Valve w/ Drain Lead Free 1/4" - 4" CLD 23 MLTPL
EFFDN-01-LF 1/2" NPT Full Port Brass Ball Valve + Drain 1/4" - 4" CLD 23 MLTPL
EFFDN-02-LF 3/4" NPT Full Port Brass Ball Valve + Drain 1/4" - 4" CLD 23 MLTPL
EFFDN-03-LF 1" NPT Full Port Brass Ball Valve + Drain 1/4" - 4" CLD 23 MLTPL
EFFLMM-01-LF 1/2" MIP x 1/2" MIP Lead Free Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFLMM-02-LF 3/4" MIP x 3/4" MIP Lead Free Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFLMM-03-LF 1" MIP x 1" MIP Lead Free Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFLMMD-01-LF 1/2" MIP x 1/2" MIP Full Port Ball Valve w/ Drain Lead Free 1/4" - 4" CLD 23 MLTPL
EFFLMMD-02-LF 3/4" MIP x 3/4" MIP Full Port Ball Valve w/ Drain Lead Free 1/4" - 4" CLD 23 MLTPL
EFFLMMD-03-LF 1" MIP x 1" MIP Full Port Ball Valve w/ Drain Lead Free 1/4" - 4" CLD 23 MLTPL
EFFLMN-03-LF 1/2" MIP x 1/2" FIP Full Port Ball Valve Lead Free 1/4" - 4" CLD 23 MLTPL
EFFLMN-04-LF 3/4" MIP x 3/4" FIP Full Port Ball Valve Lead Free 1/4" - 4" CLD 23 MLTPL
EFFLMN-05-LF 1" MIP x 1" FIP Full Port Ball Valve Lead Free 1/4" - 4" CLD 23 MLTPL
EFFLMND-01-LF 1/2" MIP x 1/2" FIP Full Port Ball Valve w/ Drain Lead Free 1/4" - 4" CLD 23 MLTPL
EFFLMND-02-LF 3/4" MIP x 3/4" FIP Full Port Ball Valve w/ Drain Lead Free 1/4" - 4" CLD 23 MLTPL
EFFLMND-03-LF 1" MIP x 1" FIP Full Port Ball Valve w/ Drain Lead Free 1/4" - 4" CLD 23 MLTPL
EFFMCH-01-LF 1/2" MIP x 3/4" NH Lead Free Ball Valve w/ Cap & Chian 1/4" - 4" CLD 23 MLTPL
EFFMCH-02-LF 3/4" MIP x 3/4" NH Lead Free Ball Valve w/ Cap & Chian 1/4" - 4" CLD 23 MLTPL
EFFMCH-03-LF 1" MIP x 3/4" NH Lead Free Ball Valve w/ Cap & Chian 1/4" - 4" CLD 23 MLTPL
EFFMU-02-LF 1/2" PEX Expansion x 1/2" MIP Brass Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFMU-03-LF 3/4" PEX Expansion x 3/4" MIP Brass Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFMU-04-LF 1" PEX Expansion x 1" MIP Brass Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFMUD-01-LF 1/2" MIP x 1/2" Exp. PEX Lead Free Ball Valve w/ Drain 1/4" - 4" CLD 23 MLTPL
EFFMUD-02-LF 3/4" MIP x 3/4" Exp. PEX Lead Free Ball Valve w/ Drain 1/4" - 4" CLD 23 MLTPL
EFFMUD-03-LF 1" MIP x 1" Exp. PEX Lead Free Ball Valve w/ Drain 1/4" - 4" CLD 23 MLTPL
EFFN-01-LF 1/4" NPT Full Port Brass Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFN-02-LF 3/8" NPT Full Port Brass Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFN-03-LF 1/2" NPT Full Port Brass Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFN-04-LF 3/4" NPT Full Port Brass Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFN-05-LF 1" NPT Full Port Brass Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFN-06-LF 1-1/4" NPT Full Port Brass Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFN-07-LF 1-1/2" NPT Full Port Brass Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFN-08-LF 2" NPT Full Port Brass Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFN-09-LF 2-1/2" NPT Full Port Brass Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFN-10-LF 3" NPT Full Port Brass Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFN-11-LF 4" NPT Full Port Brass Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFNCH-01-LF 1/2" FIP x 3/4" NH Lead Free Cap & Chain Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFNCH-02-LF 3/4" FIP x 3/4" NH Lead Free Cap & Chain Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFNCH-03-LF 1" FIP x 3/4" NH Lead Free Cap & Chain Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFNU-01-LF 1/2" PEX Expansion x 1/2" NPT Brass Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFNU-02-LF 3/4" PEX Expansion x 3/4" NPT Brass Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFNU-03-LF 1" PEX Expansion x 1" NPT Brass Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFNUD-01-LF 1/2" PEX Expansion x 1/2" NPT Brass Ball Valve w/ Drain 1/4" - 4" CLD 23 MLTPL
EFFNUD-02-LF 3/4" PEX Expansion x 3/4" NPT Brass Ball Valve w/ Drain 1/4" - 4" CLD 23 MLTPL
EFFNUD-03-LF 1" PEX Expansion x 1" NPT Brass Ball Valve w/ Drain 1/4" - 4" CLD 23 MLTPL
EFFPC-01-LF 1/2" PEX x 1/2" Sweat Brass Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFPC-01-P-LF 1/2" PEX x 1/2" Sweat Brass Ball Valve w/ Butterfly Handle 1/4" - 4" CLD 23 MLTPL
EFFPC-02-LF 3/4" PEX x 3/4" Sweat Brass Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFPC-02-P-LF 3/4" PEX x 3/4" Sweat Brass Ball Valve w/ Butterfly Handle 1/4" - 4" CLD 23 MLTPL
EFFPC-03-LF 1" PEX x 1" Sweat Brass Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFPC-03-P-LF 1" PEX x 1" Sweat Brass Ball Valve w/ Butterfly Handle 1/4" - 4" CLD 23 MLTPL
EFFPC-04-LF 1-1/4" PEX x 1-1/4" Sweat Brass Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFPC-05-LF 1 1/2" PEX x Copper Lead Free Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFPC-06-LF 2" PEX x Copper Lead Free Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFPC-23-LF 1" PEX x 1" COPPER 90 Ball Valve Lead Free 1/4" - 4" CLD 23 MLTPL
EFFPCD-01-LF 1/2" PEX x 1/2" Sweat Brass Ball Valve + Drain 1/4" - 4" CLD 23 MLTPL
EFFPCD-01-P-LF 1/2" PEX x 1/2" Sweat Brass Ball Valve+Drain w/ Butterfly Handle 1/4" - 4" CLD 23 MLTPL
EFFPCD-02-LF 3/4" PEX x 3/4" Sweat Brass Ball Valve + Drain 1/4" - 4" CLD 23 MLTPL
EFFPCD-02-P-LF 3/4" PEX x 3/4" Sweat Brass Ball Valve+Drain w/ Butterfly Handle 1/4" - 4" CLD 23 MLTPL
EFFPCD-03-LF 1" PEX x 1" Sweat Brass Ball Valve + Drain 1/4" - 4" CLD 23 MLTPL
EFFPCD-03-P-LF 1" PEX x 1" Sweat Brass Ball Valve + Drain w/ Butterfly Handle 1/4" - 4" CLD 23 MLTPL
EFFPCD-04-LF 1-1/4" PEX x 1-1/4" Sweat Brass Ball Valve + Drain 1/4" - 4" CLD 23 MLTPL
EFFPCD-33-LF 1" PEX x 1" COPPER 90 w/ Drain Ball Valve Lead Free 1/4" - 4" CLD 23 MLTPL
EFFPM-01-LF 1/2" PEX x MIP Lead Free Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFPM-02-LF 3/4" PEX x MIP Lead Free Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFPM-03-LF 1" PEX x MIP Lead Free Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFPN-01-LF 1/2" PEX x 1/2" NPT Brass Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFPN-02-LF 3/4" PEX x 3/4" NPT Brass Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFPN-03-LF 1" PEX x 1" NPT Brass Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFPN-12-LF 1" PEX x 3/4" FIP 90 Ball Valve Lead Free 1/4" - 4" CLD 23 MLTPL
EFFPN-22-LF 3/4" PEX x 3/4" FIP 90 Ball Valve Lead Free 1/4" - 4" CLD 23 MLTPL
EFFPN-23-LF 1" PEX x 1" FIP 90 Ball Valve Lead Free 1/4" - 4" CLD 23 MLTPL
EFFPND-01-LF 1/2" PEX x 1/2" NPT Brass Ball Valve w/ Drain 1/4" - 4" CLD 23 MLTPL
EFFPND-02-LF 3/4" PEX x 3/4" NPT Brass Ball Valve w/ Drain 1/4" - 4" CLD 23 MLTPL
EFFPND-03-LF 1" PEX x 1" NPT Brass Ball Valve w/ Drain 1/4" - 4" CLD 23 MLTPL
EFFPND-13-LF 1" PEX x 3/4" FIP 90 Ball Valve w/ Drain Lead Free 1/4" - 4" CLD 23 MLTPL
EFFPND-32-LF 3/4" PEX x 3/4" FIP 90 Ball Valve W/ Drain Lead Free 1/4" - 4" CLD 23 MLTPL
EFFPND-33-LF 1" PEX x 1" FIP 90 Ball Valve w/ Drain Lead Free 1/4" - 4" CLD 23 MLTPL
EFFPP-01-E-LF 1/2" PEX x 1/2" PEX with ear ball valve 1/4" - 4" CLD 23 MLTPL
EFFPP-01-LF 1/2" PEX x 1/2" PEX Brass Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFPP-01-P-LF 1/2" PEX x 1/2" PEX Brass Ball Valve w/ Butterfly Handle 1/4" - 4" CLD 23 MLTPL
EFFPP-02-E-LF 3/4" PEX x 3/4" PEX with ear ball valve 1/4" - 4" CLD 23 MLTPL
EFFPP-02-LF 3/4" PEX x 3/4"PEX Brass Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFPP-02-P-LF 3/4" PEX x 3/4"PEX Brass Ball Valve w/ Butterfly Handle 1/4" - 4" CLD 23 MLTPL
EFFPP-03-LF 1" PEX x 1"PEX Brass Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFPP-03-P-LF 1" PEX x 1"PEX Brass Ball Valve w/ Butterfly Handle 1/4" - 4" CLD 23 MLTPL
EFFPP-04-LF 1-1/4" PEX x 1-1/4"PEX Brass Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFPP-05-LF 1 1/2" PEX x PEX Lead Free Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFPP-06-LF 2" PEX x PEX Lead Free Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFPP-22-LF 3/4" PEX x 3/4" PEX 90 Ball Valve Lead Free 1/4" - 4" CLD 23 MLTPL
EFFPP-23-LF 1" PEX x 1" PEX 90 Ball Valve Lead Free 1/4" - 4" CLD 23 MLTPL
EFFPPD-01-E-LF 1/2" PEX x 1/2" PEX with drain & ear ball valve 1/4" - 4" CLD 23 MLTPL
EFFPPD-01-LF 1/2" PEX x 1/2" PEX Brass Ball Valve + Drain 1/4" - 4" CLD 23 MLTPL
EFFPPD-01-P-LF 1/2" PEX x 1/2" PEX Brass Ball Valve + Drain w/ Butterfly Handle 1/4" - 4" CLD 23 MLTPL
EFFPPD-02-E-LF 3/4" PEX x 3/4" PEX with drain & ear ball valve 1/4" - 4" CLD 23 MLTPL
EFFPPD-02-LF 3/4" PEX x 3/4" PEX Brass Ball Valve + Drain 1/4" - 4" CLD 23 MLTPL
EFFPPD-02-P-LF 3/4" PEX x 3/4" PEX Brass Ball Valve + Drain w/ Butterfly Handle 1/4" - 4" CLD 23 MLTPL
EFFPPD-03-LF 1" PEX x 1"PEX Brass Ball Valve + Drain 1/4" - 4" CLD 23 MLTPL
EFFPPD-03-P-LF 1" PEX x 1" PEX Brass Ball Valve + Drain w/ Butterfly Handle 1/4" - 4" CLD 23 MLTPL
EFFPPD-04-LF 1-1/4" PEX x 1-1/4"PEX Brass Ball Valve + Drain 1/4" - 4" CLD 23 MLTPL
EFFPPD-32-LF 3/4" PEX x 3/4" PEX 90 Ball Valve w/ Drain Lead Free 1/4" - 4" CLD 23 MLTPL
EFFPPD-33-LF 1" PEX x 1" PEX 90 Ball Valve w/ Drain Lead Free 1/4" - 4" CLD 23 MLTPL
EFFPRD-01-LF 1/2" Press x 1/2" Press w/ Drain Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFPRD-02-LF 3/4" Press x 3/4" Press w/ Drain Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFPRD-03-LF 1" Press x 1" Press w/ Drain Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFPV-11-LF 3/4" Sweat X 3/4" MPT Ball Valve w/ 1/2" FIP Side Port Lead Free 1/4" - 4" CLD 23 MLTPL
EFFPV-12-LF 1" Sweat X 1" MPT Ball Valve w/ 1/2" FIP Side Port Lead Free 1/4" - 4" CLD 23 MLTPL
EFFPV-13-LF 1-1/4" Sweat x 1-1/4" MPT w/ 1/2" FIP Side Port Lead Free Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFPV-14-LF 1-1/2" Sweat x 1-1/2" MPT w/ 1/2" FIP Side Port Lead Free Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFPV-15-LF 2" Sweat x 2" MPT w/ 1/2" FIP Side Port Lead Free Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFPV-21-LF 3/4" Sweat X 3/4" Sweat Ball Valve w/ 1/2" FIP Side Port Lead Free 1/4" - 4" CLD 23 MLTPL
EFFPV-22-LF 1" Sweat X 1" Sweat Ball Valve w/ 1/2" FIP Side Port Lead Free 1/4" - 4" CLD 23 MLTPL
EFFPV-23-LF 1-1/4" Sweat x 1-1/4" Sweat w/ 1/2" FIP Side Port Lead Free BV 1/4" - 4" CLD 23 MLTPL
EFFPV-24-LF 1-1/2" Sweat x 1-1/2" Sweat w/ 1/2" FIP Side Port Lead Free BV 1/4" - 4" CLD 23 MLTPL
EFFPV-25-LF 2" Sweat x 2" Sweat w/ 1/2" FIP Side Port Lead Free Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFPV-31-LF 3/4" Sweat X 3/4" FPT Ball Valve w/ 1/2" FIP Side Port Lead Free 1/4" - 4" CLD 23 MLTPL
EFFPV-32-LF 1" Sweat X 1" FPT Ball Valve w/ 1/2" FIP Side Port Lead Free 1/4" - 4" CLD 23 MLTPL
EFFPV-33-LF 1-1/4" Sweat x 1-1/4" FIP w/ 1/2" FIP Side Port Lead Free Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFPV-34-LF 1-1/2" Sweat x 1-1/2" FIP w/ 1/2" FIP Side Port Lead Free Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFPV-35-LF 2" Sweat x 2" FIP w/ 1/2" FIP Side Port Lead Free Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFPV-41-LF 3/4" FIP X 3/4" FIP Ball Valve w/ 1/2" FIP Side Port Lead Free 1/4" - 4" CLD 23 MLTPL
EFFPV-42-LF 1" FIP X 1" FIP Ball Valve w/ 1/2" FIP Side Port Lead Free 1/4" - 4" CLD 23 MLTPL
EFFPV-43-LF 1-1/4" FIP x 1-1/4" FIP w/ 1/2" FIP Side Port Lead Free Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFPV-44-LF 1-1/2" FIP x 1-1/2" FIP w/ 1/2" FIP Side Port Lead Free Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFPV-45-LF 2" FIP x 2" FIP w/ 1/2" FIP Side Port Lead Free Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFPV-51-LF 3/4" x 3/4" Exp. PEX Sweat w/ 1/2" FIP Side Port Lead Free BV 1/4" - 4" CLD 23 MLTPL
EFFPV-52-LF 1" Exp. PEX x 1" Sweat w/ 1/2" FIP Side Port Lead Free Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFPV-53-LF 1-1/4" Exp. PEX x 1-1/4" Sweat w/ 1/2" FIP Side Port Lead Free BV 1/4" - 4" CLD 23 MLTPL
EFFPV-54-LF 1-1/2" PEX Expansion x 1-1/2" Sweat Brass Lead Free Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFPV-55-LF 2" PEX Expansion x 2" Sweat BV w/ 1/2" FIP Side Port Lead Free 1/4" - 4" CLD 23 MLTPL
EFFPV-61-LF 1/2" Copper Pressx1/2" Copper Press w/1/2"FIP Side Port Lead Free BV 1/4" - 4" CLD 23 MLTPL
EFFPV-62-LF 3/4" Copper Pressx3/4" Copper Press w/1/2"FIP Side Port Lead Free BV 1/4" - 4" CLD 23 MLTPL
EFFPV-63-LF 1" Copper Press x 1" Copper Press w/ 1/2" FIP Side Port Lead Free BV 1/4" - 4" CLD 23 MLTPL
EFFPV-64-LF 1-1/4" Cu Press x 1-1/4" Cu Press w/ 1/2" FIP Side Port Lead Free BV 1/4" - 4" CLD 23 MLTPL
EFFPV-65-LF 1-1/2" Cu Press x 1-1/2" Cu Press w/ 1/2" FIP Side Port Lead Free BV 1/4" - 4" CLD 23 MLTPL
EFFPV-66-LF 2" Copper Press x 2" Copper Press w/ 1/2" FIP Side Port Lead Free BV 1/4" - 4" CLD 23 MLTPL
EFFPV-71-LF 1/2" Copper Press x 1/2" F1960 w/ 1/2" FIP Side Port Lead Free BV 1/4" - 4" CLD 23 MLTPL
EFFPV-72-LF 3/4" Copper Press x 3/4" F1960 w/ 1/2" FIP Side Port Lead Free BV 1/4" - 4" CLD 23 MLTPL
EFFPV-73-LF 1" Copper Press x 1" F1960 w/ 1/2" FIP Side Port Lead Free BV 1/4" - 4" CLD 23 MLTPL
EFFPV-74-LF 1-1/4" Copper Press x 1-1/4" F1960 w/1/2" FIP Side Port Lead Free BV 1/4" - 4" CLD 23 MLTPL
EFFPV-75-LF 1-1/2" Copper Press x 1-1/2" F1960 w/1/2" FIP Side Port Lead Free BV 1/4" - 4" CLD 23 MLTPL
EFFPV-76-LF 2" Copper Press x 2" F1960 w/ 1/2" FIP Side Port Lead Free BV 1/4" - 4" CLD 23 MLTPL
EFFPr-01-LF 1/2" Copper Press x 1/2" Copper Press Lead Free Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFPr-02-LF 3/4" Copper Press x 3/4" Copper Press Lead Free Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFPr-03-LF 1" Copper Press x 1" Copper Press Lead Free Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFPr-04-LF 1-1/4" Copper Press x 1-1/4" Copper Press Lead Free Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFPr-05-LF 1-1/2" Copper Press x 1-1/2" Copper Press Lead Free Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFPr-06-LF 2" Copper Press x 2" Copper Press Lead Free Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFPrCh-01-LF 1/2" Copper Press x 3/4" GHT w/ Cap & Chain Lead Free Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFPrCh-02-LF 3/4" Copper Press x 3/4" GHT w/ Cap & Chain Lead Free Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFPrCh-03-LF 1" Copper Press x 3/4" GHT w/ Cap & Chain Lead Free Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFPrM-01-LF 1/2" Copper Press x 1/2" MIP Lead Free Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFPrM-02-LF 3/4" Copper Press x 3/4" MIP Lead Free Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFPrM-03-LF 1" Copper Press x 1" MIP Lead Free Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFPrM-04-LF 1-1/4" Copper Press x 1-1/4" MIP Lead Free Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFPrM-05-LF 1-1/2" Copper Press x 1-1/2" MIP Lead Free Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFPrM-06-LF 2" Copper Press x 2" MIP Lead Free Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFPrN-01-LF 1/2" Copper Press x 1/2" FIP Lead Free Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFPrN-02-LF 3/4" Copper Press x 3/4" FIP Lead Free Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFPrN-03-LF 1" Copper Press x 1" FIP Lead Free Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFPrN-04-LF 1-1/4" Copper Press x 1-1/4" FIP Lead Free Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFPrN-05-LF 1-1/2" Copper Press x 1-1/2" FIP Lead Free Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFPrN-06-LF 2" Copper Press x 2" FIP Lead Free Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFPrP-01-LF 1/2" Copper Press x 1/2" PEX Lead Free Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFPrP-02-LF 3/4" Copper Press x 3/4" PEX Lead Free Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFPrP-03-LF 1" Copper Press x 1" PEX Lead Free Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFPrP-04-LF 1-1/4" Copper Press x 1-1/4" PEX Lead Free Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFPrP-05-LF 1-1/2" Copper Press x 1-1/2" PEX Lead Free Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFPrP-06-LF 2" Copper Press x 2" PEX Lead Free Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFPrS-01-LF 1/2" Copper Press x 1/2" FIP Swivel Lead Free Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFPrS-02-LF 3/4" Copper Press x 3/4" FIP Swivel Lead Free Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFPrS-03-LF 1" Copper Press x 1" FIP Swivel Lead Free Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFPrU-01-LF 1/2" Copper Press x 1/2" F1960 PEX Lead Free Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFPrU-02-LF 3/4" Copper Press x 3/4" F1960 PEX Lead Free Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFPrU-03-LF 1" Copper Press x 1" F1960 PEX Lead Free Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFPrU-04-LF 1-1/4" Copper Press x 1-1/4" F1960 PEX Lead Free Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFPrU-05-LF 1-1/2" Copper Press x 1-1/2" F1960 PEX Lead Free Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFPrU-06-LF 2" Copper Press x 2" F1960 PEX Lead Free Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFUM-01-LF 1/2" Exp. PEX x 1/2" MPT ball valve (Standard Port) 1/4" - 4" CLD 23 MLTPL
EFFUM-02-LF 3/4" Exp. PEX x 3/4" MPT ball valve (Standard port) 1/4" - 4" CLD 23 MLTPL
EFFUM-03-LF 1" Exp. PEX x 1" MPT ball valve (Standard Port) 1/4" - 4" CLD 23 MLTPL
EFFUN-11-LF 3/4" F1960 X 1/2" FPT Lead Free Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFUN-12-LF 1" F1960 X 3/4" FPT Lead Free Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFUN-22-LF 3/4" PEX Expansion x 3/4" FIP 90 Ball Valve Lead Free 1/4" - 4" CLD 23 MLTPL
EFFUN-23-LF 1" PEX Expansion x 1" FIP 90 Ball Valve Lead Free 1/4" - 4" CLD 23 MLTPL
EFFUND-32-LF 3/4" PEX Expansion x 3/4" FIP 90 Ball Valve w/ Drain Lead Free 1/4" - 4" CLD 23 MLTPL
EFFUND-33-LF 1" PEX Expansion x 1" FIP 90 Ball Valve w/ Drain Lead Free 1/4" - 4" CLD 23 MLTPL
EFFUU-01-LF 1/2" PEX Expansion Brass Lead Free Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFUU-01-P-LF 1/2" PEX Expansion Brass Lead Free Ball Valve w/ Butterfly Handle 1/4" - 4" CLD 23 MLTPL
EFFUU-02-LF 3/4" PEX Expansion Brass Lead Free Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFUU-02-P-LF 3/4" PEX Expansion Brass Lead Free Ball Valve w/ Butterfly Handle 1/4" - 4" CLD 23 MLTPL
EFFUU-03-LF 1" PEX Expansion Brass Lead Free Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFUU-03-P-LF 1" PEX Expansion Brass Lead Free Ball Valve w/ Butterfly Handle 1/4" - 4" CLD 23 MLTPL
EFFUU-04-LF 1-1/4" PEX Expansion Brass Lead Free Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFUU-05-LF 1-1/2" PEX Expansion Brass Lead Free Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFUU-06-LF 2" PEX Expansion Brass Lead Free Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFUU-07-LF 2-1/2" PEX Expansion Brass Lead Free Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFUU-08-LF 3" PEX Expansion Brass Lead Free Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFUU-ES02-LF 3/4" F1960 X 3/4" F1960 Union 90 Deg Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFUU-ES03-LF 3/4" F1960 X 3/4" F1960 Union 90 Deg Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFUU-S02-LF 3/4" F1960 X 3/4" F1960 Union Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFUU-S03-LF 1" F1960 X 1" F1960 Union Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFUUD-01-E-LF 1/2" PEX Exp x 1/2" PEX Exp Ball Valve w/ Drain & Ear 1/4" - 4" CLD 23 MLTPL
EFFUUD-01-LF 1/2" PEX Expansion Brass Lead Free Ball Valve + Drain 1/4" - 4" CLD 23 MLTPL
EFFUUD-01-P-LF 1/2" Exp. PEX Brass Lead Free Ball Valve + Drain w/ Btrfly Hdl 1/4" - 4" CLD 23 MLTPL
EFFUUD-02-E-LF 3/4" PEX Exp x 3/4" PEX Exp Ball Valve w/ Drain 1/4" - 4" CLD 23 MLTPL
EFFUUD-02-LF 3/4" PEX Expansion Brass Lead Free Ball Valve + Drain 1/4" - 4" CLD 23 MLTPL
EFFUUD-02-P-LF 3/4" Exp. PEX Brass Lead Free Ball Valve + Drain w/ Btrfly Hdl 1/4" - 4" CLD 23 MLTPL
EFFUUD-03-LF 1" PEX Expansion Brass Lead Free Ball Valve + Drain 1/4" - 4" CLD 23 MLTPL
EFFUUD-03-P-LF 1" Exp. PEX Brass Lead Free Ball Valve + Drain w/ Btrfly Hdl 1/4" - 4" CLD 23 MLTPL
EFFUUD-04-LF 1-1/4" PEX Expansion Brass Lead Free Ball Valve + Drain 1/4" - 4" CLD 23 MLTPL
IVCE23-050 1/2" Copper Press x 1/2" Copper Press Lead Free Ball Valve 1/4" - 4" CLD 23 MLTPL
IVCE23-075 3/4" Copper Press x 3/4" Copper Press Lead Free Ball Valve 1/4" - 4" CLD 23 MLTPL
IVCE23-100 1" Copper Press x 1" Copper Press Lead Free Ball Valve 1/4" - 4" CLD 23 MLTPL
IVCE23-125 1-1/4" Copper Press x 1-1/4" Copper Press Lead Free Ball Valve 1/4" - 4" CLD 23 MLTPL
IVCE23-150 1-1/2" Copper Press x 1-1/2" Copper Press Lead Free Ball Valve 1/4" - 4" CLD 23 MLTPL
IVCE23-200 2" Copper Press x 2" Copper Press Lead Free Ball Valve 1/4" - 4" CLD 23 MLTPL
MVA1002-LF 3/4" Exp. PEX Double 90 Elbow Ball Valve w/ Btrfly Hdl Lead Free 1/4" - 4" CLD 23 MLTPL
MVA1003-LF 1" Exp. PEX Double 90 Elbow Ball Valve w/ Btrfly Hdl Lead Free 1/4" - 4" CLD 23 MLTPL

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



Facility : Chonburi, Thailand

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Valves[G]
502100LF 2" Press x 2" Press Elbow 3/8" - 2" C. HOT MLTPL
502109LF 2" Press x 1 1/2" Press Elbow 3/8" - 2" C. HOT MLTPL
502144LF 1/2" Press x 1/2" Press Elbow 3/8" - 2" C. HOT MLTPL
502164LF 3/4" Press x 1/2" Press Elbow 3/8" - 2" C. HOT MLTPL
502166LF 3/4" Press x 3/4" Press Elbow 3/8" - 2" C. HOT MLTPL
502176LF 1" Press x 3/4" Press Elbow 3/8" - 2" C. HOT MLTPL
502177LF 1" Press x 1" Press Elbow 3/8" - 2" C. HOT MLTPL
502187LF 1 1/4" Press x 1" Press Elbow 3/8" - 2" C. HOT MLTPL
502188LF 1-1/4" Press x 1-1/4" Press Elbow 3/8" - 2" C. HOT MLTPL
502198LF 1 1/2" Press x 1 1/4" Press Elbow 3/8" - 2" C. HOT MLTPL
502199LF 1-1/2" Press x 1-1/2" Press Elbow 3/8" - 2" C. HOT MLTPL
502244LF 1/2" Press x 1/2" MPT Elbow 3/8" - 2" C. HOT MLTPL
502246LF 1/2" Press x 3/4" MPT Elbow 3/8" - 2" C. HOT MLTPL
502264LF 3/4" Press x 1/2" MPT Elbow 3/8" - 2" C. HOT MLTPL
502266LF 3/4" Press x 3/4" MPT Elbow 3/8" - 2" C. HOT MLTPL
502267LF 3/4" Press x 1" MPT Elbow 3/8" - 2" C. HOT MLTPL
502276LF 1" Press x 3/4" MPT Elbow 3/8" - 2" C. HOT MLTPL
502277LF 1" Press x 1" MPT Elbow 3/8" - 2" C. HOT MLTPL
502344LF 1/2" Press x 1/2" FPT With Ear Elbow 3/8" - 2" C. HOT MLTPL
502346LF 1/2" Press x 3/4" FPT With Ear Elbow 3/8" - 2" C. HOT MLTPL
502364LF 3/4" Press x 1/2" FPT With Ear Elbow 3/8" - 2" C. HOT MLTPL
502366LF 3/4" Press x 3/4" FPT With Ear Elbow 3/8" - 2" C. HOT MLTPL
502367LF 3/4" Press x 1" FPT With Ear Elbow 3/8" - 2" C. HOT MLTPL
502376LF 1" Press x 3/4" FPT With Ear Elbow 3/8" - 2" C. HOT MLTPL
502377LF 1" Press x 1" FPT With Ear Elbow 3/8" - 2" C. HOT MLTPL
502744LF 1/2"Press x 1/2"Pex Elbow 3/8" - 2" C. HOT MLTPL
502746LF 1/2"Press x 3/4"Pex Elbow 3/8" - 2" C. HOT MLTPL
502764LF 3/4" Press x 1/2" Pex Elbow 3/8" - 2" C. HOT MLTPL
502765LF 3/4" Press x 5/8" Pex Elbow 3/8" - 2" C. HOT MLTPL
502766LF 3/4" Press x 3/4" Pex Elbow 3/8" - 2" C. HOT MLTPL
502767LF 3/4" Press x 1" Pex Elbow 3/8" - 2" C. HOT MLTPL
502776LF 1" Press x 3/4" Pex Elbow 3/8" - 2" C. HOT MLTPL
502777LF 1" Press x 1" Pex Elbow 3/8" - 2" C. HOT MLTPL
502844LF 1/2" Press x 1/2" F1960 Elbow 3/8" - 2" C. HOT MLTPL
502846LF 1/2" Press x 3/4" F1960 Elbow 3/8" - 2" C. HOT MLTPL
502864LF 3/4" Press x 1/2" F1960 Elbow 3/8" - 2" C. HOT MLTPL
502865LF 3/4" Press x 5/8" F1960 Elbow 3/8" - 2" C. HOT MLTPL
502866LF 3/4" Press x 3/4" F1960 Elbow 3/8" - 2" C. HOT MLTPL
502867LF 3/4" Press x 1" F1960 Elbow 3/8" - 2" C. HOT MLTPL
502876LF 1" Press x 3/4" F1960 Elbow 3/8" - 2" C. HOT MLTPL
502877LF 1" Press x 1" F1960 Elbow 3/8" - 2" C. HOT MLTPL
503100LF 2" Press x 2" Press Coupling 3/8" - 2" C. HOT MLTPL
503107LF 2" Press x 1" Press Adapter 3/8" - 2" C. HOT MLTPL
503108LF 2" Press x 1 1/4" Press Adapter 3/8" - 2" C. HOT MLTPL
503109LF 2" Press x 1 1/2" Press Adapter 3/8" - 2" C. HOT MLTPL
503144LF 1/2" Press x 1/2" Press Coupling 3/8" - 2" C. HOT MLTPL
503164LF 3/4" Press x 1/2" Press Adapter 3/8" - 2" C. HOT MLTPL
503166LF 3/4" Press x 3/4" Press Coupling 3/8" - 2" C. HOT MLTPL
503174LF 1" Press x 1/2" Press Adapter 3/8" - 2" C. HOT MLTPL
503176LF 1" Press x 3/4" Press Adapter 3/8" - 2" C. HOT MLTPL
503177LF 1" Press x 1" Press Coupling 3/8" - 2" C. HOT MLTPL
503184LF 1 1/4" Press x 1/2" Press Adapter 3/8" - 2" C. HOT MLTPL
503186LF 1 1/4" Press x 3/4" Press Adapter 3/8" - 2" C. HOT MLTPL
503187LF 1 1/4" Press x 1" Press Adapter 3/8" - 2" C. HOT MLTPL
503188LF 1-1/4" Press x 1-1/4" Press Coupling 3/8" - 2" C. HOT MLTPL
503196LF 1 1/2" Press x 3/4" Press Adapter 3/8" - 2" C. HOT MLTPL
503197LF 1 1/2" Press x 1" Press Adapter 3/8" - 2" C. HOT MLTPL
503198LF 1 1/2" Press x 1 1/4" Press Adapter 3/8" - 2" C. HOT MLTPL
503199LF 1-1/2" Press x 1-1/2" Press Coupling 3/8" - 2" C. HOT MLTPL
503200LF 2" Press x 2" Male FTG Adapter 3/8" - 2" C. HOT MLTPL
503209LF 2" Press x 1 1/2" Male FTG Adapter 3/8" - 2" C. HOT MLTPL
503244LF 1/2" Press x 1/2" Male FTG Adapter 3/8" - 2" C. HOT MLTPL
503246LF 1/2" Press x 3/4" Male FTG Adapter 3/8" - 2" C. HOT MLTPL
503264LF 3/4" Press x 1/2" Male FTG Adapter 3/8" - 2" C. HOT MLTPL
503266LF 3/4" Press x 3/4" Male FTG Adapter 3/8" - 2" C. HOT MLTPL
503267LF 3/4" Press x 1" Male FTG Adapter 3/8" - 2" C. HOT MLTPL
503276LF 1" Press x 3/4" Male FTG Adapter 3/8" - 2" C. HOT MLTPL
503277LF 1" Press x 1" Male FTG Adapter 3/8" - 2" C. HOT MLTPL
503278LF 1" Press x 1 1/4" Male FTG Adapter 3/8" - 2" C. HOT MLTPL
503287LF 1 1/4" Press x 1" Male FTG Adapter 3/8" - 2" C. HOT MLTPL
503288LF 1 1/4" Press x 1 1/4" Male FTG Adapter 3/8" - 2" C. HOT MLTPL
503289LF 1 1/4" Press x 1 1/2" Male FTG Adapter 3/8" - 2" C. HOT MLTPL
503290LF 1 1/2" Press x 2" Male FTG Adapter 3/8" - 2" C. HOT MLTPL
503298LF 1 1/2" Press x 1 1/4" Male FTG Adapter 3/8" - 2" C. HOT MLTPL
503299LF 1 1/2" Press x 1-1/2"Male FTG Adapter 3/8" - 2" C. HOT MLTPL
503300LF 2" Press x 2" Female FTG Adapter 3/8" - 2" C. HOT MLTPL
503309LF 2" Press x 1 1/2" Female FTG Adapter 3/8" - 2" C. HOT MLTPL
503344LF 1/2" Press x 1/2" Female FTG Adapter 3/8" - 2" C. HOT MLTPL
503346LF 1/2" Press x 3/4" Female FTG Adapter 3/8" - 2" C. HOT MLTPL
503364LF 3/4" Press x 1/2" Female FTG Adapter 3/8" - 2" C. HOT MLTPL
503366LF 3/4" Press x 3/4" Female FTG Adapter 3/8" - 2" C. HOT MLTPL
503367LF 3/4" Press x 1" Female FTG Adapter 3/8" - 2" C. HOT MLTPL
503376LF 1" Press x 3/4" Female FTG Adapter 3/8" - 2" C. HOT MLTPL
503377LF 1" Press x 1" Female FTG Adapter 3/8" - 2" C. HOT MLTPL
503378LF 1" Press x 1 1/4" Female FTG Adapter 3/8" - 2" C. HOT MLTPL
503387LF 1 1/4" Press x 1" Female FTG Adapter 3/8" - 2" C. HOT MLTPL
503388LF 1 1/4" Press x 1 1/4" Female FTG Adapter 3/8" - 2" C. HOT MLTPL
503389LF 1 1/4" Press x 1 1/2" Female FTG Adapter 3/8" - 2" C. HOT MLTPL
503390LF 1 1/2" Press x 2" Female FTG Adapter 3/8" - 2" C. HOT MLTPL
503398LF 1 1/2" Press x 1 1/4" Female FTG Adapter 3/8" - 2" C. HOT MLTPL
503399LF 1 1/2" Press x 1 1/2" Female FTG Adapter 3/8" - 2" C. HOT MLTPL
503500LF 2" Press x 2" PEX Adapter 3/8" - 2" C. HOT MLTPL
503544LF 1/2" Press x 1/2" PEX Adapter 3/8" - 2" C. HOT MLTPL
503546LF 1/2" Press x 3/4" Pex Adapter 3/8" - 2" C. HOT MLTPL
503564LF 3/4" Press x 1/2" Pex Adapter 3/8" - 2" C. HOT MLTPL
503565LF 3/4" Press x 5/8" Pex Adapter 3/8" - 2" C. HOT MLTPL
503566LF 3/4" Press x 3/4" PEX Adapter 3/8" - 2" C. HOT MLTPL
503567LF 3/4" Press x 1" Pex Adapter 3/8" - 2" C. HOT MLTPL
503576LF 1" Press x 3/4" Pex Adapter 3/8" - 2" C. HOT MLTPL
503577LF 1" Press x 1" PEX Adapter 3/8" - 2" C. HOT MLTPL
503588LF 1-1/4" Press x 1-1/4" PEX Adapter 3/8" - 2" C. HOT MLTPL
503599LF 1-1/2" Press x 1-1/2" PEX Adapter 3/8" - 2" C. HOT MLTPL
503600LF 2" Press x 2" EXP. PEX Adapter 3/8" - 2" C. HOT MLTPL
503644LF 1/2" Press x 1/2" F1960 Adapter 3/8" - 2" C. HOT MLTPL
503646LF 1/2" Press x 3/4" F1960 Adapter 3/8" - 2" C. HOT MLTPL
503664LF 3/4" Press x 1/2"F1960 Adapter 3/8" - 2" C. HOT MLTPL
503665LF 3/4" Press x 5/8" F1960 Adapter 3/8" - 2" C. HOT MLTPL
503666LF 3/4" Press x 3/4" F1960 Adapter 3/8" - 2" C. HOT MLTPL
503667LF 3/4" Press x 1" F1960 Adapter 3/8" - 2" C. HOT MLTPL
503676LF 1" Press x 3/4"F1960 Adapter 3/8" - 2" C. HOT MLTPL
503677LF 1" Press x 1" F1960 Adapter 3/8" - 2" C. HOT MLTPL
503688LF 1-1/4" Press x 1-1/4" EXP. PEX Adapter 3/8" - 2" C. HOT MLTPL
503699LF 1-1/2" Press x 1-1/2" EXP. PEX Adapter 3/8" - 2" C. HOT MLTPL
504000LF 2" Press x 2" MPT Adapter 3/8" - 2" C. HOT MLTPL
504009LF 2" Press x 1 1/2" MPT Adapter 3/8" - 2" C. HOT MLTPL
504044LF 1/2" Press x 1/2" MPT Adapter 3/8" - 2" C. HOT MLTPL
504046LF 1/2" Press x 3/4" MPT Adapter 3/8" - 2" C. HOT MLTPL
504064LF 3/4" Press x 1/2" MPT Adapter 3/8" - 2" C. HOT MLTPL
504066LF 3/4" Press x 3/4" MPT Adapter 3/8" - 2" C. HOT MLTPL
504067LF 3/4" Press x 1" MPT Adapter 3/8" - 2" C. HOT MLTPL
504076LF 1" Press x 3/4" MPT Adapter 3/8" - 2" C. HOT MLTPL
504077LF 1" Press x 1" MPT Adapter 3/8" - 2" C. HOT MLTPL
504078LF 1" Press x 1 1/4" MPT Adapter 3/8" - 2" C. HOT MLTPL
504087LF 1 1/4" Press x 1" MPT Adapter 3/8" - 2" C. HOT MLTPL
504088LF 1-1/4" Press x 1-1/4" MPT Adapter 3/8" - 2" C. HOT MLTPL
504089LF 1 1/4" Press x 1 1/2" MPT Adapter 3/8" - 2" C. HOT MLTPL
504090LF 1 1/2" Press x 2" MPT Adapter 3/8" - 2" C. HOT MLTPL
504098LF 1 1/2" Press x 1 1/4" MPT Adapter 3/8" - 2" C. HOT MLTPL
504099LF 1-1/2" Press x 1-1/2" MPT Adapter 3/8" - 2" C. HOT MLTPL
505144LF 1/2" Press x 1/2" NPSM Brass Swivel Adapter 3/8" - 2" C. HOT MLTPL
505146LF 1/2" Press x 3/4" NPSM Brass Swivel Adapter 3/8" - 2" C. HOT MLTPL
505166LF 3/4" Press x 3/4" NPSM Brass Swivel Adapter 3/8" - 2" C. HOT MLTPL
505200LF 2" Press x 2" FPT Adapter 3/8" - 2" C. HOT MLTPL
505209LF 2" Press x 1 1/2" FPT Adapter 3/8" - 2" C. HOT MLTPL
505244LF 1/2" Press x 1/2" FPT Adapter 3/8" - 2" C. HOT MLTPL
505246LF 1/2" Press x 3/4" FPT Adapter 3/8" - 2" C. HOT MLTPL
505264LF 3/4" Press x 1/2" FPT Adapter 3/8" - 2" C. HOT MLTPL
505266LF 3/4" Press x 3/4" FPT Adapter 3/8" - 2" C. HOT MLTPL
505267LF 3/4" Press x 1"FPT Adapter 3/8" - 2" C. HOT MLTPL
505276LF 1" Press x 3/4" FPT Adapter 3/8" - 2" C. HOT MLTPL
505277LF 1" Press x 1" FPT Adapter 3/8" - 2" C. HOT MLTPL
505278LF 1" Press x 1 1/4" FPT Adapter 3/8" - 2" C. HOT MLTPL
505287LF 1 1/4" Press x 1" FPT Adapter 3/8" - 2" C. HOT MLTPL
505288LF 1-1/4" Press x 1-1/4" FPT Adapter 3/8" - 2" C. HOT MLTPL
505289LF 1 1/4" Press x 1 1/2" FPT Adapter 3/8" - 2" C. HOT MLTPL
505290LF 1 1/2" Press x 2" FPT Adapter 3/8" - 2" C. HOT MLTPL
505298LF 1 1/2" Press x 1 1/4" FPT Adapter 3/8" - 2" C. HOT MLTPL
505299LF 1-1/2" Press x 1-1/2" FPT Adapter 3/8" - 2" C. HOT MLTPL
506000LF 2" Press Cap 3/8" - 2" C. HOT MLTPL
506004LF 1/2" Press Cap 3/8" - 2" C. HOT MLTPL
506006LF 3/4" Press Cap 3/8" - 2" C. HOT MLTPL
506007LF 1" Press Cap 3/8" - 2" C. HOT MLTPL
506008LF 1 1/4" Press Cap 3/8" - 2" C. HOT MLTPL
506009LF 1 1/2" Press Cap 3/8" - 2" C. HOT MLTPL
506144LF 1/2" Press x 1/2" NPSM Plastic Swivel Adapter 3/8" - 2" C. HOT MLTPL
506146LF 1/2" Press x 3/4" NPSM Plastic Swivel Adapter 3/8" - 2" C. HOT MLTPL
506166LF 3/4" Press x 3/4" NPSM Plastic Swivel Adapter 3/8" - 2" C. HOT MLTPL
507103-LF 3/4" FPT x 1/2" FPT x 1/2" Press Tee 3/8" - 2" C. HOT MLTPL
507104-LF 3/4" FPT x 1/2" FPT x 3/4" Press Tee 3/8" - 2" C. HOT MLTPL
508500LF 2" Press x 2" Press x 2" PEX Tee 3/8" - 2" C. HOT MLTPL
508508LF 1-1/4" Press x 1-1/4" PEX Tee 3/8" - 2" C. HOT MLTPL
508509LF 1-1/2" Press x 1-1/2" PEX Tee 3/8" - 2" C. HOT MLTPL
508544LF 1/2" Press x 1/2" Press x 1/2" PEX Tee 3/8" - 2" C. HOT MLTPL
508564LF 3/4" Press x 3/4" Press x 1/2" PEX Tee 3/8" - 2" C. HOT MLTPL
508566LF 3/4" Press x 3/4" Press x 3/4" PEX Tee 3/8" - 2" C. HOT MLTPL
508574LF 1" Press x 1" Press x 1/2" PEX Tee 3/8" - 2" C. HOT MLTPL
508576LF 1" Press x 1" Press x 3/4" PEX Tee 3/8" - 2" C. HOT MLTPL
508577LF 1" Press x 1" Press x 1" PEX Tee 3/8" - 2" C. HOT MLTPL
508584LF 1-1/4" Press x 1-1/4" Press x 1/2" PEX Tee 3/8" - 2" C. HOT MLTPL
508586LF 1-1/4" Press x 1-1/4" Press x 3/4" PEX Tee 3/8" - 2" C. HOT MLTPL
508587LF 1-1/4" Press x 1-1/4" Press x 1" PEX Tee 3/8" - 2" C. HOT MLTPL
508588LF 1-1/4" Press x 1-1/4" Press x 1-1/4" PEX Tee 3/8" - 2" C. HOT MLTPL
508594LF 1-1/2" Press x 1-1/2" Press x 1/2" PEX Tee 3/8" - 2" C. HOT MLTPL
508596LF 1-1/2" Press x 1-1/2" Press x 3/4" PEX Tee 3/8" - 2" C. HOT MLTPL
508597LF 1-1/2" Press x 1-1/2" Press x 1" PEX Tee 3/8" - 2" C. HOT MLTPL
508598LF 1-1/2" Press x 1-1/2" Press x 1-1/4" PEX Tee 3/8" - 2" C. HOT MLTPL
508599LF 1-1/2" Press x 1-1/2" Press x 1-1/2" PEX Tee 3/8" - 2" C. HOT MLTPL
508644LF 1/2" Press x 1/2" Press x 1/2" EXP. PEX Tee 3/8" - 2" C. HOT MLTPL
508664LF 3/4" Press x 3/4" Press x 1/2" EXP. PEX Tee 3/8" - 2" C. HOT MLTPL
508666LF 3/4" Press x 3/4" Press x 3/4" EXP. PEX Tee 3/8" - 2" C. HOT MLTPL
508674LF 1" Press x 1" Press x 1/2" EXP. PEX Tee 3/8" - 2" C. HOT MLTPL
508676LF 1" Press x 1" Press x 3/4" EXP. PEX Tee 3/8" - 2" C. HOT MLTPL
508677LF 1" Press x 1" Press x 1" EXP. PEX Tee 3/8" - 2" C. HOT MLTPL
508684LF 1-1/4" Press x 1-1/4" Press x 1/2" EXP. PEX Tee 3/8" - 2" C. HOT MLTPL
508686LF 1-1/4" Press x 1-1/4" Press x 3/4" EXP. PEX Tee 3/8" - 2" C. HOT MLTPL
508687LF 1-1/4" Press x 1-1/4" Press x 1" EXP. PEX Tee 3/8" - 2" C. HOT MLTPL
508688LF 1-1/4"Press x 1-1/4" Press x 1-1/4" EXP. PEX Tee 3/8" - 2" C. HOT MLTPL
508694LF 1-1/2" Press x 1-1/2" Press x 1/2" EXP. PEX Tee 3/8" - 2" C. HOT MLTPL
508696LF 1-1/2" Press x 1-1/2" Press x 3/4" EXP. PEX Tee 3/8" - 2" C. HOT MLTPL
508697LF 1-1/2" Press x 1-1/2" Press x 1" EXP. PEX Tee 3/8" - 2" C. HOT MLTPL
508698LF 1-1/2"Press x 1-1/2" Press x 1-1/4" EXP. PEX Tee 3/8" - 2" C. HOT MLTPL
508699LF 1-1/2"Press x 1-1/2" Press x 1-1/2" EXP. PEX Tee 3/8" - 2" C. HOT MLTPL
509009LF 2" Press x 2" Press x 1 1/2" Press Tee 3/8" - 2" C. HOT MLTPL
509009LF 2" Press x 2" Press x 2" Press Tee 3/8" - 2" C. HOT MLTPL
509090LF 2" Press x 1 1/2" Press x 2" Press Tee 3/8" - 2" C. HOT MLTPL
509099LF 2" Press x 1 1/2" Press x 1 1/2" Press Tee 3/8" - 2" C. HOT MLTPL
509444LF 1/2" Press x 1/2" Press x 1/2" Press Tee 3/8" - 2" C. HOT MLTPL
509446LF 1/2" Press x 1/2" Press x 3/4" Press Tee 3/8" - 2" C. HOT MLTPL
509644LF 3/4" Press x 1/2" Press x 1/2" Press Tee 3/8" - 2" C. HOT MLTPL
509646LF 3/4" Press x 1/2" Press x 3/4" Press Tee 3/8" - 2" C. HOT MLTPL
509664LF 3/4" Press x 3/4" Press x 1/2" Press Tee 3/8" - 2" C. HOT MLTPL
509666LF 3/4" Press x 3/4" Press x 3/4" Press Tee 3/8" - 2" C. HOT MLTPL
509667LF 3/4" Press x 3/4" Press x 1" Press Tee 3/8" - 2" C. HOT MLTPL
509766LF 1" Press x 3/4" Press x 3/4" Press Tee 3/8" - 2" C. HOT MLTPL
509767LF 1" Press x 3/4" Press x 1" Press Tee 3/8" - 2" C. HOT MLTPL
509774LF 1" Press x 1" Press x 1/2" Press Tee 3/8" - 2" C. HOT MLTPL
509776LF 1" Press x 1" Press x 3/4" Press Tee 3/8" - 2" C. HOT MLTPL
509777LF 1" Press x 1" Press x 1" Press Tee 3/8" - 2" C. HOT MLTPL
509778LF 1" Press x 1" Press x 1 1/4" Press Tee 3/8" - 2" C. HOT MLTPL
509877LF 1 1/4" Press x 1" Press x 1" Press Tee 3/8" - 2" C. HOT MLTPL
509878LF 1 1/4" Press x 1" Press x 1 1/4" Press Tee 3/8" - 2" C. HOT MLTPL
509880LF 1 1/4" Press x 1 1/4" Press x 2" Press Tee 3/8" - 2" C. HOT MLTPL
509886LF 1 1/4" Press x 1 1/4" Press x 3/4" Press Tee 3/8" - 2" C. HOT MLTPL
509887LF 1 1/4" Press x 1 1/4" Press x 1" Press Tee 3/8" - 2" C. HOT MLTPL
509888LF 1 1/4" Press x 1 1/4" Press x 1 1/4" Press Tee 3/8" - 2" C. HOT MLTPL
509889LF 1 1/4" Press x 1 1/4" Press x 1 1/2" Press Tee 3/8" - 2" C. HOT MLTPL
509988LF 1 1/2" Press x 1 1/4" Press x 1 1/4" Press Tee 3/8" - 2" C. HOT MLTPL
509989LF 1 1/2" Press x 1 1/4" Press x 1 1/2" Press Tee 3/8" - 2" C. HOT MLTPL
509990LF 1 1/2" Press x 1 1/2" Press x 2" Press Tee 3/8" - 2" C. HOT MLTPL
509998LF 1 1/2" Press x 1 1/2" Press x 1 1/4" Press Tee 3/8" - 2" C. HOT MLTPL
509999LF 1 1/2" Press x 1 1/2" Press x 1 1/2" Press Tee 3/8" - 2" C. HOT MLTPL
50A2144LF 1/2" Press x 1/2" Press 45 Elbow 3/8" - 2" C. HOT MLTPL
50A2166LF 3/4" Press x 3/4" Press 45 Elbow 3/8" - 2" C. HOT MLTPL
50A2177LF 1" Press x 1" Press 45 Elbow 3/8" - 2" C. HOT MLTPL
50A2188LF 1 1/4" Press x 1 1/4" Press 45 Elbow 3/8" - 2" C. HOT MLTPL
50A2199LF 1-1/2"Press x 1-1/2"Press 45 Elbow 3/8" - 2" C. HOT MLTPL
50A2600LF 2" Press x 2" Male FTG 45 Elbow 3/8" - 2" C. HOT MLTPL
50A2644LF 1/2" Press x 1/2" Male FTG 45 Elbow 3/8" - 2" C. HOT MLTPL
50A2666LF 3/4" Press x 3/4" Male FTG 45 Elbow 3/8" - 2" C. HOT MLTPL
50A2677LF 1" Press x 1" Press Male FTG 45 Elbow 3/8" - 2" C. HOT MLTPL
50A2688LF 1 1/4" Press x 1 1/4" Male FTG 45 Elbow 3/8" - 2" C. HOT MLTPL
50A2699LF 1 1/2" Press x 1 1/2" Male FTG 45 Elbow 3/8" - 2" C. HOT MLTPL
50N3100LF 2" Press x 2" Press Repair Coupling 3/8" - 2" C. HOT MLTPL
50N3144LF 1/2" Press x 1/2" Press Repair Coupling 3/8" - 2" C. HOT MLTPL
50N3166LF 3/4" Press x 3/4" Press Repair Coupling 3/8" - 2" C. HOT MLTPL
50N3177LF 1" Press x 1" Press Repair Coupling 3/8" - 2" C. HOT MLTPL
50N3188LF 1 1/4" Press x 1 1/4" Press Repair Coupling 3/8" - 2" C. HOT MLTPL
50N3199LF 1 1/2" Press x 1 1/2" Press Repair Coupling 3/8" - 2" C. HOT MLTPL
519774-LF 1"x1"x1/2" Monoflow Press Tee 3/8" - 2" C. HOT MLTPL
519776-LF 1"x1"x3/4" Monoflow Press Tee 3/8" - 2" C. HOT MLTPL
550A2100LF 2"Press x 2"Press 45 Elbow 3/8" - 2" C. HOT MLTPL
EFF121-01-LF 1/2" Sweat Straight Lead Free Mini Ball Valve 1/4" - 3/4" CLD 23 MLTPL
EFF121-02-LF 1/2" Sweat x 1/4" OD Comp Straight Lead Free Mini Ball Valve 1/4" - 3/4" CLD 23 MLTPL
EFF121-03-LF 1/2" Sweat x 3/8" OD Comp Straight Lead Free Mini Ball Valve 1/4" - 3/4" CLD 23 MLTPL
EFF121-05-LF 5/8" x 1/4" OD Comp Straight Lead Free Mini Ball Valve 1/4" - 3/4" CLD 23 MLTPL
EFF121-06-LF 5/8" x 3/8" OD Comp Straight Lead Free Mini Ball Valve 1/4" - 3/4" CLD 23 MLTPL
EFF121-08-LF 1/2" PEX x 1/4" OD Comp Straight Lead Free Mini Ball Valve 1/4" - 3/4" CLD 23 MLTPL
EFF121-09-LF 1/2" PEX x 3/8" OD Comp Straight Lead Free Mini Ball Valve 1/4" - 3/4" CLD 23 MLTPL
EFF121-10-LF 1/2" PEX Straight Lead Free Mini Ball Valve 1/4" - 3/4" CLD 23 MLTPL
EFF121-11-LF 1/2" PEX x 1/2" Sweat Straight Lead Free Mini Ball Valve 1/4" - 3/4" CLD 23 MLTPL
EFF121-12-LF 3/8" FPT x 3/8" OD Comp Straight Lead-free Mini Ball Valve 1/4" - 3/4" CLD 23 MLTPL
EFF121-13-LF 1/2" FPT x 3/8" OD Comp Straight Lead Free Mini Ball Valve 1/4" - 3/4" CLD 23 MLTPL
EFF121-14-LF 3/8" Swivel x 3/8" OD Comp Straight Retrofit LF Mini Ball Valve 1/4" - 3/4" CLD 23 MLTPL
EFF121-15-LF 1/4" OD Comp Straight Lead Free Mini Ball Valve 1/4" - 3/4" CLD 23 MLTPL
EFF121-17-LF 3/8" OD Comp Straight Lead Free Mini Ball Valve 1/4" - 3/4" CLD 23 MLTPL
EFF121-30S-LF 1/2" Dual Sweat/MIP x 3/4" GHT Straight Lead Free Mini Ball Valve 1/4" - 3/4" CLD 23 MLTPL
EFF121-40S-LF 1/4" MIP x 3/4" GHT Straight Lead Free Mini Ball Valve 1/4" - 3/4" CLD 23 MLTPL
EFF121-41-LF 3/4" Copper x 3/4" GHT Straight Lead Free Mini Ball Valve 1/4" - 3/4" CLD 23 MLTPL
EFF121-61-LF 1/2" PEX x 3/4" GHT Straight Lead Free Mini Ball Valve 1/4" - 3/4" CLD 23 MLTPL
EFF121-62-LF 3/4" PEX x 3/4" GHT Straight Lead Free Mini Ball Valve 1/4" - 3/4" CLD 23 MLTPL
EFF121-81-LF 1/2" F1807 x 1/2" NPSM with Plastic Nut Mini Ball Valve 1/4" - 3/4" CLD 23 MLTPL
EFF122-01-LF 1/2" Sweat Angled Lead Free Mini Valve 1/4" - 3/4" CLD 23 MLTPL
EFF122-02-LF 1/2" Sweat x 1/4" OD Comp Angled Lead-free Mini Valve 1/4" - 3/4" CLD 23 MLTPL
EFF122-03-LF 1/2" Sweat x 3/8" OD Comp Angled Lead Free Mini Valve 1/4" - 3/4" CLD 23 MLTPL
EFF122-04-LF 1/2" Sweat x 5/8" OD Comp Angled Lead Free Mini Valve 1/4" - 3/4" CLD 23 MLTPL
EFF122-05-LF 5/8" x 1/4" OD Comp Angled Lead Free Mini Valve 1/4" - 3/4" CLD 23 MLTPL
EFF122-06-LF 5/8" x 3/8" OD Comp Angled Lead Free Mini Valve 1/4" - 3/4" CLD 23 MLTPL
EFF122-08-LF 1/2" PEX x 1/4" OD Comp Angled Lead Free Mini Valve 1/4" - 3/4" CLD 23 MLTPL
EFF122-09-LF 1/2" PEX x 3/8" OD Comp Angled Lead Free Mini Valve 1/4" - 3/4" CLD 23 MLTPL
EFF122-10-LF 1/2" PEX Angled Lead Free Mini Valve 1/4" - 3/4" CLD 23 MLTPL
EFF122-11-LF 1/2" PEX x Sweat Angled Lead Free Mini Valve 1/4" - 3/4" CLD 23 MLTPL
EFF122-12-LF 3/8" FPT x 3/8" OD Comp Angled Lead-free Mini Valve 1/4" - 3/4" CLD 23 MLTPL
EFF122-13-LF 1/2" FPT x 3/8" OD Comp Angled Lead Free Mini Valve 1/4" - 3/4" CLD 23 MLTPL
EFF122-15-LF 1/4" OD Comp Angled Lead Free Mini Ball Valve 1/4" - 3/4" CLD 23 MLTPL
EFF122-17-LF 3/8" OD Comp Angled Lead-free Mini Valve 1/4" - 3/4" CLD 23 MLTPL
EFF122-25F-LF 1/2" Sweat x 3/4" GHT Angled Lead Free Mini Valve 1/4" - 3/4" CLD 23 MLTPL
EFF122-29S-LF 1/2" PEX x 3/4 GHT Angled Lead Free Mini Valve 1/4" - 3/4" CLD 23 MLTPL
EFF122-29S-LF 1/2" PEX x 3/4 GHT Angled Lead Free Mini Valve 1/4" - 3/4" CLD 23 MLTPL
EFF122-30S-CH-LF 1/2" Dual Sweat/MIP x 3/4 GHT Angled LF Mini V w/ Cap & Chain 1/4" - 3/4" CLD 23 MLTPL
EFF122-30S-LF 1/2" Dual Sweat/MIP x 3/4 GHT Angled Lead Free Mini Valve 1/4" - 3/4" CLD 23 MLTPL
EFF122-41-LF 3/4" Copper x 3/4" GHT Angled Lead Free Mini Ball Valve 1/4" - 3/4" CLD 23 MLTPL
EFF122-61-LF 1/2" PEX x 3/4" GHT Angled Lead Free Mini Ball Valve 1/4" - 3/4" CLD 23 MLTPL
EFF122-62-CH-LF 3/4" PEX x 3/4" GHT Angled Lead Free Mini BV w/ Cap & Chain 1/4" - 3/4" CLD 23 MLTPL
EFF122-62-LF 3/4" PEX x 3/4" GHT Angled Lead Free Mini Ball Valve 1/4" - 3/4" CLD 23 MLTPL
EFF123-02-LF 1/2" x 1/2" PEX x 1/4" OD Comp Lead Free Mini Tee Valve 1/4" - 3/4" CLD 23 MLTPL
EFF123-03-LF 1/2" x 1/2" PEX x 3/8" OD Comp Lead Free Mini Tee Valve 1/4" - 3/4" CLD 23 MLTPL
EFF123-07-LF 5/8 x 5/8" x 1/4" OD Comp Lead Free Mini Tee Valve 1/4" - 3/4" CLD 23 MLTPL
EFF123-08-LF 5/8" x 5/8" x 3/8" OD Comp Lead Free Mini Tee Valve 1/4" - 3/4" CLD 23 MLTPL
EFF123-31-CH-LF 1/2" PEX X 3/4" GHT Lead Free Tee Mini Ball Valve + Cap & Chain 1/4" - 3/4" CLD 23 MLTPL
EFF123-31-LF 1/2" PEX X 3/4" GHT Lead Free Tee Mini Ball Valve 1/4" - 3/4" CLD 23 MLTPL
EFF123-51-CH-LF 3/4" PEX x 3/4" PEX x 3/4" GHT Tee Lead Free Mini Tee Valve 1/4" - 3/4" CLD 23 MLTPL
EFF123-51-LF 3/4" PEX x 3/4" PEX x 3/4" GHT Tee Lead Free Mini Tee Valve 1/4" - 3/4" CLD 23 MLTPL
EFF123-61-CH-LF 3/4" Copper x 3/4" Copper x 3/4" GHT Tee Lead Free Mini Tee V 1/4" - 3/4" CLD 23 MLTPL
EFF123-61-LF 3/4" Copper x 3/4" Copper x 3/4" GHT Tee Lead Free Mini Tee Valve 1/4" - 3/4" CLD 23 MLTPL
EFF123-81-LF 1/2" PEX x3/8" Com x3/8" Com Dual outlet mini ball valve 1/4" - 3/4" CLD 23 MLTPL
EFF123-81-LF 1/2" PEX x3/8" Com x3/8" Com Dual outlet mini ball valve(Angle Tee) 1/4" - 3/4" CLD 23 MLTPL
EFF124-01-LF 1/2" Sweat x 1/2" Sweat Lead Free Balancing Mini Ball Valve 1/4" - 3/4" CLD 23 MLTPL
EFF124-02-LF 3/8" OD Comp x 3/8" OD Comp Lead Free Balancing Mini Ball Valve 1/4" - 3/4" CLD 23 MLTPL
EFF124-03-LF 1/2" PEX x 1/2" PEX Lead Free Balancing Mini Ball Valve 1/4" - 3/4" CLD 23 MLTPL
EFF124-04-LF 1/2" PEX x 1/2" Copper Sweat Lead Free Balancing Mini Ball Valve 1/4" - 3/4" CLD 23 MLTPL
EFF128-02-LF 1/2" Copper x 1/4" OD Comp Loose Key Mini Ball Valve Straight 1/4" - 3/4" CLD 23 MLTPL
EFF128-03-LF 1/2" Copper x 3/8" OD Comp Loose Key Mini Ball Valve Straight 1/4" - 3/4" CLD 23 MLTPL
EFF128-08-LF 1/2" PEX x 1/4" OD Comp Loose Key Mini Ball Valve Straight 1/4" - 3/4" CLD 23 MLTPL
EFF128-09-LF 1/2" PEX x 3/8" OD Comp Loose Key Mini Ball Valve Straight 1/4" - 3/4" CLD 23 MLTPL
EFF128-12-LF 1/2" FIP x 1/4" OD Comp Loose Key Mini Ball Valve Straight 1/4" - 3/4" CLD 23 MLTPL
EFF128-13-LF 1/2" FIP x 3/8" OD Comp Loose Key Mini Ball Valve Straight 1/4" - 3/4" CLD 23 MLTPL
EFF129-02-LF 1/2" Copper x 1/4" OD Comp Loose Key Mini Ball Valve Angled 1/4" - 3/4" CLD 23 MLTPL
EFF129-03-LF 1/2" Copper x 3/8" OD Comp Loose Key Mini Ball Valve Angled 1/4" - 3/4" CLD 23 MLTPL
EFF129-08-LF 1/2" PEX x 1/4" OD Comp Loose Key Mini Ball Valve Angled 1/4" - 3/4" CLD 23 MLTPL
EFF129-09-LF 1/2" PEX x 3/8" OD Comp Loose Key Mini Ball Valve Angled 1/4" - 3/4" CLD 23 MLTPL
EFF129-12-LF 1/2" FIP x 1/4" OD Comp Loose Key Mini Ball Valve Angled 1/4" - 3/4" CLD 23 MLTPL
EFF129-13-LF 1/2" FIP x 3/8" OD Comp Loose Key Mini Ball Valve Angled 1/4" - 3/4" CLD 23 MLTPL
EFF221-08-LF 1/2" F1960 X 1/4" OD Comp Lead Free Straight Mini Ball Valve 1/4" - 3/4" CLD 23 MLTPL
EFF221-09-LF 1/2" F1960 X 3/8" OD Comp Lead Free Straight Mini Ball Valve 1/4" - 3/4" CLD 23 MLTPL
EFF221-62-LF 3/4" F1960 x 3/4" GHT Straight Mini Ball Valve 1/4" - 3/4" CLD 23 MLTPL
EFF221-71-LF 1/2" F Sweat x 1/2" Exp. PEX Mini Ball Valve 1/4" - 3/4" CLD 23 MLTPL
EFF221-72-LF 1/2" F Sweat x 1/2" Exp. PEX Mini Ball Valve 1/4" - 3/4" CLD 23 MLTPL
EFF221-81-LF 1/2 F1960 x 1/2 NPSM Straight Mini Ball Valve 1/4" - 3/4" CLD 23 MLTPL
EFF222-08-LF 1/2" F1960 X 1/4" OD Comp Lead Free Angled Mini Ball Valve 1/4" - 3/4" CLD 23 MLTPL
EFF222-09-LF 1/2" F1960 X 3/8" OD Comp Lead Free Angled Mini Ball Valve 1/4" - 3/4" CLD 23 MLTPL
EFF222-61-LF 1/2" F1960 X 3/4" GHT Lead Free Angled Mini Ball Valve 1/4" - 3/4" CLD 23 MLTPL
EFF222-62-LF 3/4" F1960 X 3/4" GHT Angled Mini Valve 1/4" - 3/4" CLD 23 MLTPL
EFF223-01A-LF 1/2" Exp. PEX x 1/2" Exp. PEX x 1/2" F. Sweat Mini Ball Valve 1/4" - 3/4" CLD 23 MLTPL
EFF223-02-LF 1/2" F1960 X 1/4" OD Comp Lead Free Tee Mini Ball Valve 1/4" - 3/4" CLD 23 MLTPL
EFF223-02A-LF 1/2" Exp. PEX x 1/2" Exp. PEX x1/4" Com Mini Ball Valve(Angle Tee) 1/4" - 3/4" CLD 23 MLTPL
EFF223-03-LF 1/2" F1960 X 3/8" OD Comp Lead Free Tee Mini Ball Valve 1/4" - 3/4" CLD 23 MLTPL
EFF223-03A-LF 1/2" Exp. PEX x1/2" Exp. PEX x 3/8" Com Mini Ball Valve(Angle Tee) 1/4" - 3/4" CLD 23 MLTPL
EFF223-04A-LF 1/2" Exp. PEX x 1/2" Exp. PEX x5/8" Com Mini Ball Valve(Angle Tee) 1/4" - 3/4" CLD 23 MLTPL
EFF223-05A-LF 1/2" Exp. PEX x 1/2" Exp. PEX x 1/2" Exp. PEX Mini Ball Valve 1/4" - 3/4" CLD 23 MLTPL
EFF223-31-CH-LF 1/2" F1960 X 3/4" GHT Lead Free Tee Mini BV + Cap & Chain 1/4" - 3/4" CLD 23 MLTPL
EFF223-31-LF 1/2" F1960 X 3/4" GHT Lead Free Tee Mini Ball Valve 1/4" - 3/4" CLD 23 MLTPL
EFF223-51-CH-LF 3/4" F1960 x 3/4" F1960 x 3/4"GHT Mini Tee BV w/ Cap & Chain 1/4" - 4" CLD 23 MLTPL
EFF223-51-LF 3/4" F1960 x 3/4" F1960 x 3/4"GHT Mini Tee Ball Valve 1/4" - 3/4" CLD 23 MLTPL
EFF223-71-LF 1/2" Exp. PEX x 3/8" Com. Straight Dual outlet Mini Ball Valve 1/4" - 3/4" CLD 23 MLTPL
EFF223-72-LF 1/2" Exp. PEX x 3/8" Com. Angle Dual outlet Mini Ball Valve 1/4" - 3/4" CLD 23 MLTPL
EFF224-03-LF 1/2" F1960 x 1/2" F1960 Lead Free Balancing Mini Ball Valve 1/4" - 3/4" CLD 23 MLTPL
EFF224-04-LF 1/2" F1960 x 1/2" Copper Sweat Lead Free Balancing Mini Ball Valve 1/4" - 3/4" CLD 23 MLTPL
EFF228-08-LF 1/2" F1960 x 1/4" OD Comp Loose Key Mini Ball Valve Straight 1/4" - 3/4" CLD 23 MLTPL
EFF228-09-LF 1/2" F1960 x 3/8" OD Comp Loose Key Mini Ball Valve Straight 1/4" - 3/4" CLD 23 MLTPL
EFF229-08-LF 1/2" F1960 x 1/4" OD Comp Loose Key Mini Ball Valve Angled 1/4" - 3/4" CLD 23 MLTPL
EFF229-09-LF 1/2" F1960 x 3/8" OD Comp Loose Key mini Ball Valve Angled 1/4" - 3/4" CLD 23 MLTPL
EFF230-01-LF 1/2" PEX x 3/8" OD Comp x 3/8" OD Comp straight dual outlet valve 1/4" - 3/4" CLD 23 MLTPL
EFF230-02-LF 1/2" PEX x 3/8" OD Comp x 3/8" OD Comp angle dual outlet stop valve 1/4" - 3/4" CLD 23 MLTPL
EFF321-08-LF 1/2" Press x 1/4" Comp Straight Mini Ball Valve 1/4" - 3/4" CLD 23 MLTPL
EFF321-09-LF 1/2" Press x 3/8" Comp Straight Mini Ball Valve 1/4" - 3/4" CLD 23 MLTPL
EFF321-10-LF 1/2" Press x 1/2" Press Straight Mini Ball Valve 1/4" - 3/4" CLD 23 MLTPL
EFF322-08-LF 1/2" Press x 1/4" Comp Angle Mini Ball Valve 1/4" - 3/4" CLD 23 MLTPL
EFF322-09-LF 1/2" Press x 3/8" Comp Angle Mini Ball Valve 1/4" - 3/4" CLD 23 MLTPL
EFF322-10-LF 1/2" Press x 1/2" Press Angle Mini Ball Valve 1/4" - 3/4" CLD 23 MLTPL
EFFBB-01LF 1/2" Barb x 1/2" Barb Ball Valve 1/4"- 4" CLD 23 MLTPL
EFFBB-02LF 3/4" Barb x 1/2" Barb Ball Valve 1/4"- 4" CLD 23 MLTPL
EFFBB-03LF 1" Barb x 1/2" Barb Ball Valve 1/4"- 4" CLD 23 MLTPL
EFFBD-01-LF 1/2" MPT X 1/2" GHT HOSE BIBB 1/4" - 4" CLD 23 MLTPL
EFFBD-02-LF 3/4" MPT X 3/4" GHT HOSE BIBB 1/4" - 4" CLD 23 MLTPL
EFFBT-01-LF 1/2" MIP/COPPER SWEAT x 3/4" GHT Hose Bibb Lead Free 1/4" - 4" CLD 23 MLTPL
EFFBT-02-LF 3/4" MIP x 3/4" GHT Hose Bibb Lead Free 1/4" - 4" CLD 23 MLTPL
EFFBT-03-LF 1/2" FPT x 3/4" GHT Hose Bibb Lead Free 1/4" - 4" CLD 23 MLTPL
EFFBT-04-LF 3/4" FPT x 3/4" GHT Hose Bibb Lead Free 1/4" - 4" CLD 23 MLTPL
EFFBT-05-LF 1/2" COPPER SWEAT x 3/4" GHT Hose Bibb Lead Free 1/4" - 4" CLD 23 MLTPL
EFFBT-06-LF 3/4" COPPER SWEAT x 3/4" GHT Hose Bibb Lead Free 1/4" - 4" CLD 23 MLTPL
EFFBT-07-LF 1/2" PEX x 3/4" GHT Hose Bibb Lead Free 1/4" - 4" CLD 23 MLTPL
EFFBT-08-LF 3/4" PEX x 3/4" GHT Hose Bibb Lead Free 1/4" - 4" CLD 23 MLTPL
EFFBT-09-LF 1/2" PEX Expansion X 3/4" GHT Hose Bibb Lead Free 1/4" - 4" CLD 23 MLTPL
EFFBT-10-LF 3/4" PEX Expansion x 3/4" GHT Hose Bibb Lead Free 1/4" - 4" CLD 23 MLTPL
EFFBT-21-LF 1/2" MIP/COPPER SWEAT X 3/4"GHT Hose Bibb W/ FLANGE Lead Free 1/4" - 4" CLD 23 MLTPL
EFFBT-22-LF 3/4" MIP x 3/4" GHT Hose Bibb W/ FLANGE Lead Free 1/4" - 4" CLD 23 MLTPL
EFFBT-23-LF 1/2" FPT x 3/4" GHT Hose Bibb W/ FLANGE Lead Free 1/4" - 4" CLD 23 MLTPL
EFFBT-24-LF 3/4" FPT x 3/4" GHT Hose Bibb W/ FLANGE Lead Free 1/4" - 4" CLD 23 MLTPL
EFFBT-25-LF 1/2" COPPER SWEAT x 3/4" GHT Hose Bibb W/ FLANGE Lead Free 1/4" - 4" CLD 23 MLTPL
EFFBT-26-LF 3/4" COPPER SWEAT x 3/4" GHT Hose Bibb W/ FLANGE Lead Free 1/4" - 4" CLD 23 MLTPL
EFFBT-27-LF 1/2" PEX x 3/4" GHT Hose Bibb W/ FLANGE Lead Free 1/4" - 4" CLD 23 MLTPL
EFFBT-28-LF 3/4" PEX x 3/4" GHT Hose Bibb W/ FLANGE Lead Free 1/4" - 4" CLD 23 MLTPL
EFFBT-29-LF 1/2" PEX Expansion x 3/4" GHT Hose Bibb W/ FLANGE Lead Free 1/4" - 4" CLD 23 MLTPL
EFFBT-30-LF 3/4" PEX Expansion x 3/4" GHT Hose Bibb W/ FLANGE Lead Free 1/4" - 4" CLD 23 MLTPL
EFFBT-31-LF 1/2" PEX x 3/4" GHT Quarter Turn Sillcock 1/4" - 4" CLD 23 MLTPL
EFFBT-32-LF 3/4" PEX x 3/4" GHT Quarter Turn Sillcock 1/4" - 4" CLD 23 MLTPL
EFFBT-33-LF 1/2" Exp. PEX x 3/4" GHT Quarter Turn Sillcock 1/4" - 4" CLD 23 MLTPL
EFFC-01-LF 1/2" CxC Full Port Brass Lead Free Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFC-02-LF 3/4" CxC Full Port Brass Lead Free Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFC-03-LF 1" CxC Full Port Brass Lead Free Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFC-04-LF 1-1/4" CxC Full Port Brass Lead Free Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFC-05-LF 1-1/2" CxC Full Port Brass Lead Free Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFC-06-LF 2" CxC Full Port Brass Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFC-07-LF 2-1/2" CxC Full Port Brass Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFC-08-LF 3" CxC Full Port Brass Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFC-09-LF 4" CxC Full Port Brass Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFC-12-LF 1" COPPER X 3/4" COPPER 90 Ball Valve Lead Free 1/4" - 4" CLD 23 MLTPL
EFFC-23-LF 1" COPPER X 1" COPPER 90 Ball Valve Lead Free 1/4" - 4" CLD 23 MLTPL
EFFCC-01-LF 1/2" Compression Full Port Brass Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFCC-02-LF 3/4" Compression Full Port Brass Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFCC-03-LF 1" x 1" Compression Full Port Brass Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFCCD-01-LF 1/4" OD Comp Straight Lead Free Mini Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFCCD-02-LF 3/4" Compression Brass Ball Valve + Drain 1/4" - 4" CLD 23 MLTPL
EFFCCD-03-LF 1" Compression Brass Ball Valve + Drain 1/4" - 4" CLD 23 MLTPL
EFFCCH-01-LF 1/2" Copper x 3/4" NH Lead Free Cap & Chain Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFCCH-02-LF 3/4" Copper x 3/4" NH Lead Free Cap & Chain Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFCCH-03-LF 1" Copper x 3/4" NH Lead Free Cap & Chain Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFCM-01-LF 1/2" Sweat X MPT Full Port Ball Valve Lead Free 1/4" - 4" CLD 23 MLTPL
EFFCM-02-LF 3/4" Sweat X MPT Full Port Ball Valve Lead Free 1/4" - 4" CLD 23 MLTPL
EFFCM-03-LF 1" Sweat X MPT Full Port Ball Valve Lead Free 1/4" - 4" CLD 23 MLTPL
EFFCM-04-LF 1-1/4" Sweat x MPT Full Port Brass Ball Valve w/ 1/4" FIP Side Port 1/4" - 4" CLD 23 MLTPL
EFFCM-05-LF 1-1/2" Sweat x MPT Full Port Brass Ball Valve w/ 1/4" FIP Side Port 1/4" - 4" CLD 23 MLTPL
EFFCM-06-LF 2" Sweat x MPT Full Port Brass Ball Valve w/ 1/4" FIP Side Port 1/4" - 4" CLD 23 MLTPL
EFFCN-12-LF 1" COPPER x 3/4" FIP 90 Ball Valve Lead Free 1/4" - 4" CLD 23 MLTPL
EFFCN-22-LF 3/4" COPPER x 3/4" FIP 90 Ball Valve Lead Free 1/4" - 4" CLD 23 MLTPL
EFFCN-23-LF 1" COPPER x 1" FIP 90 Ball Valve Lead Free 1/4" - 4" CLD 23 MLTPL
EFFCND-13-LF 1" COPPER x 3/4" FIP 90 Ball Valve Lead Free w/ Drain 1/4" - 4" CLD 23 MLTPL
EFFCND-32-LF 3/4" COPPER x 3/4" FIP 90 Ball Valve W/ Drain Lead Free 1/4" - 4" CLD 23 MLTPL
EFFCND-33-LF 1" COPPER x 1" FIP 90 Ball Valve w/ Drain Lead Free 1/4" - 4" CLD 23 MLTPL
EFFCR-01-LF 1/2" NPT Full Port Ball Valve w/ 1/4" FIP Side Port Lead Free 1/4" - 4" CLD 23 MLTPL
EFFCR-02-LF 3/4" NPT Full Port Ball Valve w/ 1/4" FIP Side Port Lead Free 1/4" - 4" CLD 23 MLTPL
EFFCR-03-LF 1" NPT Full Port Ball Valve w/ 1/4" FIP Side Port Lead Free 1/4" - 4" CLD 23 MLTPL
EFFCR-04-LF 1-1/4" NPT Full Port Ball Valve w/ 1/4" FIP Side Port Lead Free 1/4" - 4" CLD 23 MLTPL
EFFCR-05-LF 1-1/2" NPT Full Port Ball Valve w/ 1/4" FIP Side Port Lead Free 1/4" - 4" CLD 23 MLTPL
EFFCR-06-LF 2" NPT Full Port Ball Valve w/ 1/4" FIP Side Port Lead Free 1/4" - 4" CLD 23 MLTPL
EFFCU-01-LF 1/2" PEX Expansion x 1/2" Sweat Brass Lead Free Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFCU-01-P-LF 1/2" x 1/2" Exp. PEX Sweat Brass Lead Free BV w/ Btrfly Hdl 1/4" - 4" CLD 23 MLTPL
EFFCU-02-LF 3/4" PEX Expansion x 3/4" Sweat Brass Lead Free Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFCU-02-P-LF 3/4" Exp. PEX x 3/4" Sweat Brass Lead Free BV w/ Btrfly Hdl 1/4" - 4" CLD 23 MLTPL
EFFCU-03-LF 1" PEX Expansion x 1" Sweat Brass Lead Free Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFCU-03-P-LF 1" Exp. PEX x 1" Sweat Brass Lead Free Ball Valve w/ Btrfly Hdl 1/4" - 4" CLD 23 MLTPL
EFFCU-04-LF 1-1/4" PEX Expansion x 1-1/4" Sweat Brass Lead Free Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFCU-05-LF 1-1/2" PEX Expansion x 1-1/2" Sweat Brass Lead Free Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFCU-06-LF 2" PEX Expansion x 2" Sweat Brass Lead Free Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFCU-07-LF 2-1/2" PEX Expansion x 2-1/2" Sweat Brass Lead Free Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFCU-08-LF 3" PEX Expansion x 3" Sweat Brass Lead Free Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFCU-22-LF 3/4" PEX Expansion x 3/4" Copper 90 Ball Valve Lead Free 1/4" - 4" CLD 23 MLTPL
EFFCU-23-LF 1" PEX Expansion x 1" Copper 90 Ball Valve Lead Free 1/4" - 4" CLD 23 MLTPL
EFFCUD-01-LF 1/2" PEX Expansion x 1/2" Sweat Brass Lead Free Ball Valve + Drain 1/4" - 4" CLD 23 MLTPL
EFFCUD-01-P-LF 1/2" Exp. PEX x 1/2" Sweat Brass Lead Free BV+Drain w/Btrfly Hdl 1/4" - 4" CLD 23 MLTPL
EFFCUD-02-LF 3/4" PEX Expansion x 3/4" Sweat Brass Lead Free Ball Valve + Drain 1/4" - 4" CLD 23 MLTPL
EFFCUD-02-P-LF 3/4" x 3/4" Exp. PEX Sweat Brass Lead Free BV+Drain w/ Btrfly Hdl 1/4" - 4" CLD 23 MLTPL
EFFCUD-03-LF 1" PEX Expansion x 1" Sweat Brass Lead Free Ball Valve + Drain 1/4" - 4" CLD 23 MLTPL
EFFCUD-03-P-LF 1" Exp. PEX x 1" Sweat Brass Lead Free BV + Drain w/ Btrfly Hdl 1/4" - 4" CLD 23 MLTPL
EFFCUD-04-LF 1-1/4" PEX Expansionx1-1/4" Sweat Brass Lead Free Ball Valve+Drain 1/4" - 4" CLD 23 MLTPL
EFFCUD-32-LF 3/4" PEX Expansion x 3/4" Copper 90 Ball Valve W/ Drain Lead Free 1/4" - 4" CLD 23 MLTPL
EFFCUD-33-LF 1" PEX Expansion x 1" Copper 90 Ball Valve w/ Drain Lead Free 1/4" - 4" CLD 23 MLTPL
EFFCV-01-LF 1/2" Sweat X 1/2" FPT Ball Valve w/ 1/4" Side Port Lead Free 1/4" - 4" CLD 23 MLTPL
EFFCV-02-LF 3/4" Sweat X 3/4" FPT Ball Valve w/ 1/4" Side Port Lead Free 1/4" - 4" CLD 23 MLTPL
EFFCV-03-LF 1" Sweat X 1" FPT Ball Valve w/ 1/4" Side Port Lead Free 1/4" - 4" CLD 23 MLTPL
EFFCV-04-LF 1-1/4" Sweat x 1-1/4" FPT Ball Valve w/ 1/4" FIP Side Port 1/4" - 4" CLD 23 MLTPL
EFFCV-05-LF 1-1/2" Sweat x 1-1/2" FPT Ball Valve w/ 1/4" FIP Side Port 1/4" - 4" CLD 23 MLTPL
EFFCV-06-LF 2" Sweat x 2" FPT Ball Valve w/ 1/4" FIP Side Port 1/4" - 4" CLD 23 MLTPL
EFFDC-01-LF 1/2" CxC Full Port Brass Ball Valve + Drain 1/4" - 4" CLD 23 MLTPL
EFFDC-02-LF 3/4" CxC Full Port Brass Ball Valve + Drain 1/4" - 4" CLD 23 MLTPL
EFFDC-03-LF 1" CxC Full Port Brass Ball Valve + Drain 1/4" - 4" CLD 23 MLTPL
EFFDC-13-LF 1" COPPER X 3/4" COPPER 90 Ball Valve w/ Drain Lead Free 1/4" - 4" CLD 23 MLTPL
EFFDC-33-LF 1" COPPER X 1" COPPER 90 Ball Valve w/ Drain Lead Free 1/4" - 4" CLD 23 MLTPL
EFFDN-01-LF 1/2" NPT Full Port Brass Ball Valve + Drain 1/4" - 4" CLD 23 MLTPL
EFFDN-02-LF 3/4" NPT Full Port Brass Ball Valve + Drain 1/4" - 4" CLD 23 MLTPL
EFFDN-03-LF 1" NPT Full Port Brass Ball Valve + Drain 1/4" - 4" CLD 23 MLTPL
EFFLMM-01-LF 1/2" MIP x 1/2" MIP Lead Free Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFLMM-02-LF 3/4" MIP x 3/4" MIP Lead Free Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFLMM-03-LF 1" MIP x 1" MIP Lead Free Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFLMMD-01-LF 1/2" MIP x 1/2" MIP Full Port Ball Valve w/ Drain Lead Free 1/4" - 4" CLD 23 MLTPL
EFFLMMD-02-LF 3/4" MIP x 3/4" MIP Full Port Ball Valve w/ Drain Lead Free 1/4" - 4" CLD 23 MLTPL
EFFLMMD-03-LF 1" MIP x 1" MIP Full Port Ball Valve w/ Drain Lead Free 1/4" - 4" CLD 23 MLTPL
EFFLMN-03-LF 1/2" MIP x 1/2" FIP Full Port Ball Valve Lead Free 1/4" - 4" CLD 23 MLTPL
EFFLMN-04-LF 3/4" MIP x 3/4" FIP Full Port Ball Valve Lead Free 1/4" - 4" CLD 23 MLTPL
EFFLMN-05-LF 1" MIP x 1" FIP Full Port Ball Valve Lead Free 1/4" - 4" CLD 23 MLTPL
EFFLMND-01-LF 1/2" MIP x 1/2" FIP Full Port Ball Valve w/ Drain Lead Free 1/4" - 4" CLD 23 MLTPL
EFFLMND-02-LF 3/4" MIP x 3/4" FIP Full Port Ball Valve w/ Drain Lead Free 1/4" - 4" CLD 23 MLTPL
EFFLMND-03-LF 1" MIP x 1" FIP Full Port Ball Valve w/ Drain Lead Free 1/4" - 4" CLD 23 MLTPL
EFFMCH-01-LF 1/2" MIP x 3/4" NH Lead Free Ball Valve w/ Cap & Chian 1/4" - 4" CLD 23 MLTPL
EFFMCH-02-LF 3/4" MIP x 3/4" NH Lead Free Ball Valve w/ Cap & Chian 1/4" - 4" CLD 23 MLTPL
EFFMCH-03-LF 1" MIP x 3/4" NH Lead Free Ball Valve w/ Cap & Chian 1/4" - 4" CLD 23 MLTPL
EFFMU-02-LF 1/2" PEX Expansion x 1/2" MIP Brass Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFMU-03-LF 3/4" PEX Expansion x 3/4" MIP Brass Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFMU-04-LF 1" PEX Expansion x 1" MIP Brass Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFMUD-01-LF 1/2" MIP x 1/2" Exp. PEX Lead Free Ball Valve w/ Drain 1/4" - 4" CLD 23 MLTPL
EFFMUD-02-LF 3/4" MIP x 3/4" Exp. PEX Lead Free Ball Valve w/ Drain 1/4" - 4" CLD 23 MLTPL
EFFMUD-03-LF 1" MIP x 1" Exp. PEX Lead Free Ball Valve w/ Drain 1/4" - 4" CLD 23 MLTPL
EFFN-01-LF 1/4" NPT Full Port Brass Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFN-02-LF 3/8" NPT Full Port Brass Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFN-03-LF 1/2" NPT Full Port Brass Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFN-04-LF 3/4" NPT Full Port Brass Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFN-05-LF 1" NPT Full Port Brass Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFN-06-LF 1-1/4" NPT Full Port Brass Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFN-07-LF 1-1/2" NPT Full Port Brass Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFN-08-LF 2" NPT Full Port Brass Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFN-09-LF 2-1/2" NPT Full Port Brass Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFN-10-LF 3" NPT Full Port Brass Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFN-11-LF 4" NPT Full Port Brass Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFNCH-01-LF 1/2" FIP x 3/4" NH Lead Free Cap & Chain Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFNCH-02-LF 3/4" FIP x 3/4" NH Lead Free Cap & Chain Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFNCH-03-LF 1" FIP x 3/4" NH Lead Free Cap & Chain Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFNU-01-LF 1/2" PEX Expansion x 1/2" NPT Brass Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFNU-02-LF 3/4" PEX Expansion x 3/4" NPT Brass Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFNU-03-LF 1" PEX Expansion x 1" NPT Brass Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFNUD-01-LF 1/2" PEX Expansion x 1/2" NPT Brass Ball Valve w/ Drain 1/4" - 4" CLD 23 MLTPL
EFFNUD-02-LF 3/4" PEX Expansion x 3/4" NPT Brass Ball Valve w/ Drain 1/4" - 4" CLD 23 MLTPL
EFFNUD-03-LF 1" PEX Expansion x 1" NPT Brass Ball Valve w/ Drain 1/4" - 4" CLD 23 MLTPL
EFFPC-01-LF 1/2" PEX x 1/2" Sweat Brass Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFPC-01-P-LF 1/2" PEX x 1/2" Sweat Brass Ball Valve w/ Butterfly Handle 1/4" - 4" CLD 23 MLTPL
EFFPC-02-LF 3/4" PEX x 3/4" Sweat Brass Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFPC-02-P-LF 3/4" PEX x 3/4" Sweat Brass Ball Valve w/ Butterfly Handle 1/4" - 4" CLD 23 MLTPL
EFFPC-03-LF 1" PEX x 1" Sweat Brass Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFPC-03-P-LF 1" PEX x 1" Sweat Brass Ball Valve w/ Butterfly Handle 1/4" - 4" CLD 23 MLTPL
EFFPC-04-LF 1-1/4" PEX x 1-1/4" Sweat Brass Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFPC-05-LF 1 1/2" PEX x Copper Lead Free Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFPC-06-LF 2" PEX x Copper Lead Free Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFPC-23-LF 1" PEX x 1" COPPER 90 Ball Valve Lead Free 1/4" - 4" CLD 23 MLTPL
EFFPCD-01-LF 1/2" PEX x 1/2" Sweat Brass Ball Valve + Drain 1/4" - 4" CLD 23 MLTPL
EFFPCD-01-P-LF 1/2" PEX x 1/2" Sweat Brass Ball Valve+Drain w/ Butterfly Handle 1/4" - 4" CLD 23 MLTPL
EFFPCD-02-LF 3/4" PEX x 3/4" Sweat Brass Ball Valve + Drain 1/4" - 4" CLD 23 MLTPL
EFFPCD-02-P-LF 3/4" PEX x 3/4" Sweat Brass Ball Valve+Drain w/ Butterfly Handle 1/4" - 4" CLD 23 MLTPL
EFFPCD-03-LF 1" PEX x 1" Sweat Brass Ball Valve + Drain 1/4" - 4" CLD 23 MLTPL
EFFPCD-03-P-LF 1" PEX x 1" Sweat Brass Ball Valve + Drain w/ Butterfly Handle 1/4" - 4" CLD 23 MLTPL
EFFPCD-04-LF 1-1/4" PEX x 1-1/4" Sweat Brass Ball Valve + Drain 1/4" - 4" CLD 23 MLTPL
EFFPCD-33-LF 1" PEX x 1" COPPER 90 w/ Drain Ball Valve Lead Free 1/4" - 4" CLD 23 MLTPL
EFFPM-01-LF 1/2" PEX x MIP Lead Free Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFPM-02-LF 3/4" PEX x MIP Lead Free Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFPM-03-LF 1" PEX x MIP Lead Free Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFPN-01-LF 1/2" PEX x 1/2" NPT Brass Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFPN-02-LF 3/4" PEX x 3/4" NPT Brass Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFPN-03-LF 1" PEX x 1" NPT Brass Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFPN-12-LF 1" PEX x 3/4" FIP 90 Ball Valve Lead Free 1/4" - 4" CLD 23 MLTPL
EFFPN-22-LF 3/4" PEX x 3/4" FIP 90 Ball Valve Lead Free 1/4" - 4" CLD 23 MLTPL
EFFPN-23-LF 1" PEX x 1" FIP 90 Ball Valve Lead Free 1/4" - 4" CLD 23 MLTPL
EFFPND-01-LF 1/2" PEX x 1/2" NPT Brass Ball Valve w/ Drain 1/4" - 4" CLD 23 MLTPL
EFFPND-02-LF 3/4" PEX x 3/4" NPT Brass Ball Valve w/ Drain 1/4" - 4" CLD 23 MLTPL
EFFPND-03-LF 1" PEX x 1" NPT Brass Ball Valve w/ Drain 1/4" - 4" CLD 23 MLTPL
EFFPND-13-LF 1" PEX x 3/4" FIP 90 Ball Valve w/ Drain Lead Free 1/4" - 4" CLD 23 MLTPL
EFFPND-32-LF 3/4" PEX x 3/4" FIP 90 Ball Valve W/ Drain Lead Free 1/4" - 4" CLD 23 MLTPL
EFFPND-33-LF 1" PEX x 1" FIP 90 Ball Valve w/ Drain Lead Free 1/4" - 4" CLD 23 MLTPL
EFFPP-01-E-LF 1/2" PEX x 1/2" PEX with ear ball valve 1/4" - 4" CLD 23 MLTPL
EFFPP-01-LF 1/2" PEX x 1/2" PEX Brass Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFPP-01-P-LF 1/2" PEX x 1/2" PEX Brass Ball Valve w/ Butterfly Handle 1/4" - 4" CLD 23 MLTPL
EFFPP-02-E-LF 3/4" PEX x 3/4" PEX with ear ball valve 1/4" - 4" CLD 23 MLTPL
EFFPP-02-LF 3/4" PEX x 3/4"PEX Brass Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFPP-02-P-LF 3/4" PEX x 3/4"PEX Brass Ball Valve w/ Butterfly Handle 1/4" - 4" CLD 23 MLTPL
EFFPP-03-LF 1" PEX x 1"PEX Brass Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFPP-03-P-LF 1" PEX x 1"PEX Brass Ball Valve w/ Butterfly Handle 1/4" - 4" CLD 23 MLTPL
EFFPP-04-LF 1-1/4" PEX x 1-1/4"PEX Brass Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFPP-05-LF 1 1/2" PEX x PEX Lead Free Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFPP-06-LF 2" PEX x PEX Lead Free Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFPP-22-LF 3/4" PEX x 3/4" PEX 90 Ball Valve Lead Free 1/4" - 4" CLD 23 MLTPL
EFFPP-23-LF 1" PEX x 1" PEX 90 Ball Valve Lead Free 1/4" - 4" CLD 23 MLTPL
EFFPPD-01-E-LF 1/2" PEX x 1/2" PEX with drain & ear ball valve 1/4" - 4" CLD 23 MLTPL
EFFPPD-01-LF 1/2" PEX x 1/2" PEX Brass Ball Valve + Drain 1/4" - 4" CLD 23 MLTPL
EFFPPD-01-P-LF 1/2" PEX x 1/2" PEX Brass Ball Valve + Drain w/ Butterfly Handle 1/4" - 4" CLD 23 MLTPL
EFFPPD-02-E-LF 3/4" PEX x 3/4" PEX with drain & ear ball valve 1/4" - 4" CLD 23 MLTPL
EFFPPD-02-LF 3/4" PEX x 3/4" PEX Brass Ball Valve + Drain 1/4" - 4" CLD 23 MLTPL
EFFPPD-02-P-LF 3/4" PEX x 3/4" PEX Brass Ball Valve + Drain w/ Butterfly Handle 1/4" - 4" CLD 23 MLTPL
EFFPPD-03-LF 1" PEX x 1"PEX Brass Ball Valve + Drain 1/4" - 4" CLD 23 MLTPL
EFFPPD-03-P-LF 1" PEX x 1" PEX Brass Ball Valve + Drain w/ Butterfly Handle 1/4" - 4" CLD 23 MLTPL
EFFPPD-04-LF 1-1/4" PEX x 1-1/4"PEX Brass Ball Valve + Drain 1/4" - 4" CLD 23 MLTPL
EFFPPD-32-LF 3/4" PEX x 3/4" PEX 90 Ball Valve w/ Drain Lead Free 1/4" - 4" CLD 23 MLTPL
EFFPPD-33-LF 1" PEX x 1" PEX 90 Ball Valve w/ Drain Lead Free 1/4" - 4" CLD 23 MLTPL
EFFPRD-01-LF 1/2" Press x 1/2" Press w/ Drain Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFPRD-02-LF 3/4" Press x 3/4" Press w/ Drain Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFPRD-03-LF 1" Press x 1" Press w/ Drain Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFPV-11-LF 3/4" Sweat X 3/4" MPT Ball Valve w/ 1/2" FIP Side Port Lead Free 1/4" - 4" CLD 23 MLTPL
EFFPV-12-LF 1" Sweat X 1" MPT Ball Valve w/ 1/2" FIP Side Port Lead Free 1/4" - 4" CLD 23 MLTPL
EFFPV-13-LF 1-1/4" Sweat x 1-1/4" MPT w/ 1/2" FIP Side Port Lead Free Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFPV-14-LF 1-1/2" Sweat x 1-1/2" MPT w/ 1/2" FIP Side Port Lead Free Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFPV-15-LF 2" Sweat x 2" MPT w/ 1/2" FIP Side Port Lead Free Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFPV-21-LF 3/4" Sweat X 3/4" Sweat Ball Valve w/ 1/2" FIP Side Port Lead Free 1/4" - 4" CLD 23 MLTPL
EFFPV-22-LF 1" Sweat X 1" Sweat Ball Valve w/ 1/2" FIP Side Port Lead Free 1/4" - 4" CLD 23 MLTPL
EFFPV-23-LF 1-1/4" Sweat x 1-1/4" Sweat w/ 1/2" FIP Side Port Lead Free BV 1/4" - 4" CLD 23 MLTPL
EFFPV-24-LF 1-1/2" Sweat x 1-1/2" Sweat w/ 1/2" FIP Side Port Lead Free BV 1/4" - 4" CLD 23 MLTPL
EFFPV-25-LF 2" Sweat x 2" Sweat w/ 1/2" FIP Side Port Lead Free Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFPV-31-LF 3/4" Sweat X 3/4" FPT Ball Valve w/ 1/2" FIP Side Port Lead Free 1/4" - 4" CLD 23 MLTPL
EFFPV-32-LF 1" Sweat X 1" FPT Ball Valve w/ 1/2" FIP Side Port Lead Free 1/4" - 4" CLD 23 MLTPL
EFFPV-33-LF 1-1/4" Sweat x 1-1/4" FIP w/ 1/2" FIP Side Port Lead Free Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFPV-34-LF 1-1/2" Sweat x 1-1/2" FIP w/ 1/2" FIP Side Port Lead Free Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFPV-35-LF 2" Sweat x 2" FIP w/ 1/2" FIP Side Port Lead Free Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFPV-41-LF 3/4" FIP X 3/4" FIP Ball Valve w/ 1/2" FIP Side Port Lead Free 1/4" - 4" CLD 23 MLTPL
EFFPV-42-LF 1" FIP X 1" FIP Ball Valve w/ 1/2" FIP Side Port Lead Free 1/4" - 4" CLD 23 MLTPL
EFFPV-43-LF 1-1/4" FIP x 1-1/4" FIP w/ 1/2" FIP Side Port Lead Free Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFPV-44-LF 1-1/2" FIP x 1-1/2" FIP w/ 1/2" FIP Side Port Lead Free Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFPV-45-LF 2" FIP x 2" FIP w/ 1/2" FIP Side Port Lead Free Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFPV-51-LF 3/4" x 3/4" Exp. PEX Sweat w/ 1/2" FIP Side Port Lead Free BV 1/4" - 4" CLD 23 MLTPL
EFFPV-52-LF 1" Exp. PEX x 1" Sweat w/ 1/2" FIP Side Port Lead Free Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFPV-53-LF 1-1/4" Exp. PEX x 1-1/4" Sweat w/ 1/2" FIP Side Port Lead Free BV 1/4" - 4" CLD 23 MLTPL
EFFPV-54-LF 1-1/2" PEX Expansion x 1-1/2" Sweat Brass Lead Free Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFPV-55-LF 2" PEX Expansion x 2" Sweat BV w/ 1/2" FIP Side Port Lead Free 1/4" - 4" CLD 23 MLTPL
EFFPV-61-LF 1/2" Copper Pressx1/2" Copper Press w/1/2"FIP Side Port Lead Free BV 1/4" - 4" CLD 23 MLTPL
EFFPV-62-LF 3/4" Copper Pressx3/4" Copper Press w/1/2"FIP Side Port Lead Free BV 1/4" - 4" CLD 23 MLTPL
EFFPV-63-LF 1" Copper Press x 1" Copper Press w/ 1/2" FIP Side Port Lead Free BV 1/4" - 4" CLD 23 MLTPL
EFFPV-64-LF 1-1/4" Cu Press x 1-1/4" Cu Press w/ 1/2" FIP Side Port Lead Free BV 1/4" - 4" CLD 23 MLTPL
EFFPV-65-LF 1-1/2" Cu Press x 1-1/2" Cu Press w/ 1/2" FIP Side Port Lead Free BV 1/4" - 4" CLD 23 MLTPL
EFFPV-66-LF 2" Copper Press x 2" Copper Press w/ 1/2" FIP Side Port Lead Free BV 1/4" - 4" CLD 23 MLTPL
EFFPV-71-LF 1/2" Copper Press x 1/2" F1960 w/ 1/2" FIP Side Port Lead Free BV 1/4" - 4" CLD 23 MLTPL
EFFPV-72-LF 3/4" Copper Press x 3/4" F1960 w/ 1/2" FIP Side Port Lead Free BV 1/4" - 4" CLD 23 MLTPL
EFFPV-73-LF 1" Copper Press x 1" F1960 w/ 1/2" FIP Side Port Lead Free BV 1/4" - 4" CLD 23 MLTPL
EFFPV-74-LF 1-1/4" Copper Press x 1-1/4" F1960 w/1/2" FIP Side Port Lead Free BV 1/4" - 4" CLD 23 MLTPL
EFFPV-75-LF 1-1/2" Copper Press x 1-1/2" F1960 w/1/2" FIP Side Port Lead Free BV 1/4" - 4" CLD 23 MLTPL
EFFPV-76-LF 2" Copper Press x 2" F1960 w/ 1/2" FIP Side Port Lead Free BV 1/4" - 4" CLD 23 MLTPL
EFFPr-01-LF 1/2" Copper Press x 1/2" Copper Press Lead Free Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFPr-02-LF 3/4" Copper Press x 3/4" Copper Press Lead Free Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFPr-03-LF 1" Copper Press x 1" Copper Press Lead Free Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFPr-04-LF 1-1/4" Copper Press x 1-1/4" Copper Press Lead Free Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFPr-05-LF 1-1/2" Copper Press x 1-1/2" Copper Press Lead Free Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFPr-06-LF 2" Copper Press x 2" Copper Press Lead Free Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFPrCh-01-LF 1/2" Copper Press x 3/4" GHT w/ Cap & Chain Lead Free Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFPrCh-02-LF 3/4" Copper Press x 3/4" GHT w/ Cap & Chain Lead Free Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFPrCh-03-LF 1" Copper Press x 3/4" GHT w/ Cap & Chain Lead Free Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFPrM-01-LF 1/2" Copper Press x 1/2" MIP Lead Free Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFPrM-02-LF 3/4" Copper Press x 3/4" MIP Lead Free Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFPrM-03-LF 1" Copper Press x 1" MIP Lead Free Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFPrM-04-LF 1-1/4" Copper Press x 1-1/4" MIP Lead Free Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFPrM-05-LF 1-1/2" Copper Press x 1-1/2" MIP Lead Free Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFPrM-06-LF 2" Copper Press x 2" MIP Lead Free Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFPrN-01-LF 1/2" Copper Press x 1/2" FIP Lead Free Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFPrN-02-LF 3/4" Copper Press x 3/4" FIP Lead Free Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFPrN-03-LF 1" Copper Press x 1" FIP Lead Free Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFPrN-04-LF 1-1/4" Copper Press x 1-1/4" FIP Lead Free Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFPrN-05-LF 1-1/2" Copper Press x 1-1/2" FIP Lead Free Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFPrN-06-LF 2" Copper Press x 2" FIP Lead Free Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFPrP-01-LF 1/2" Copper Press x 1/2" PEX Lead Free Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFPrP-02-LF 3/4" Copper Press x 3/4" PEX Lead Free Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFPrP-03-LF 1" Copper Press x 1" PEX Lead Free Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFPrP-04-LF 1-1/4" Copper Press x 1-1/4" PEX Lead Free Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFPrP-05-LF 1-1/2" Copper Press x 1-1/2" PEX Lead Free Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFPrP-06-LF 2" Copper Press x 2" PEX Lead Free Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFPrS-01-LF 1/2" Copper Press x 1/2" FIP Swivel Lead Free Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFPrS-02-LF 3/4" Copper Press x 3/4" FIP Swivel Lead Free Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFPrS-03-LF 1" Copper Press x 1" FIP Swivel Lead Free Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFPrU-01-LF 1/2" Copper Press x 1/2" F1960 PEX Lead Free Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFPrU-02-LF 3/4" Copper Press x 3/4" F1960 PEX Lead Free Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFPrU-03-LF 1" Copper Press x 1" F1960 PEX Lead Free Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFPrU-04-LF 1-1/4" Copper Press x 1-1/4" F1960 PEX Lead Free Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFPrU-05-LF 1-1/2" Copper Press x 1-1/2" F1960 PEX Lead Free Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFPrU-06-LF 2" Copper Press x 2" F1960 PEX Lead Free Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFUM-01-LF 1/2" Exp. PEX x 1/2" MPT ball valve (Standard Port) 1/4" - 4" CLD 23 MLTPL
EFFUM-02-LF 3/4" Exp. PEX x 3/4" MPT ball valve (Standard port) 1/4" - 4" CLD 23 MLTPL
EFFUM-03-LF 1" Exp. PEX x 1" MPT ball valve (Standard Port) 1/4" - 4" CLD 23 MLTPL
EFFUN-11-LF 3/4" F1960 X 1/2" FPT Lead Free Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFUN-12-LF 1" F1960 X 3/4" FPT Lead Free Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFUN-22-LF 3/4" PEX Expansion x 3/4" FIP 90 Ball Valve Lead Free 1/4" - 4" CLD 23 MLTPL
EFFUN-23-LF 1" PEX Expansion x 1" FIP 90 Ball Valve Lead Free 1/4" - 4" CLD 23 MLTPL
EFFUND-32-LF 3/4" PEX Expansion x 3/4" FIP 90 Ball Valve w/ Drain Lead Free 1/4" - 4" CLD 23 MLTPL
EFFUND-33-LF 1" PEX Expansion x 1" FIP 90 Ball Valve w/ Drain Lead Free 1/4" - 4" CLD 23 MLTPL
EFFUU-01-LF 1/2" PEX Expansion Brass Lead Free Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFUU-01-P-LF 1/2" PEX Expansion Brass Lead Free Ball Valve w/ Butterfly Handle 1/4" - 4" CLD 23 MLTPL
EFFUU-02-LF 3/4" PEX Expansion Brass Lead Free Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFUU-02-P-LF 3/4" PEX Expansion Brass Lead Free Ball Valve w/ Butterfly Handle 1/4" - 4" CLD 23 MLTPL
EFFUU-03-LF 1" PEX Expansion Brass Lead Free Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFUU-03-P-LF 1" PEX Expansion Brass Lead Free Ball Valve w/ Butterfly Handle 1/4" - 4" CLD 23 MLTPL
EFFUU-04-LF 1-1/4" PEX Expansion Brass Lead Free Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFUU-05-LF 1-1/2" PEX Expansion Brass Lead Free Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFUU-06-LF 2" PEX Expansion Brass Lead Free Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFUU-07-LF 2-1/2" PEX Expansion Brass Lead Free Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFUU-08-LF 3" PEX Expansion Brass Lead Free Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFUU-ES02-LF 3/4" F1960 X 3/4" F1960 Union 90 Deg Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFUU-ES03-LF 3/4" F1960 X 3/4" F1960 Union 90 Deg Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFUU-S02-LF 3/4" F1960 X 3/4" F1960 Union Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFUU-S03-LF 1" F1960 X 1" F1960 Union Ball Valve 1/4" - 4" CLD 23 MLTPL
EFFUUD-01-E-LF 1/2" PEX Exp x 1/2" PEX Exp Ball Valve w/ Drain & Ear 1/4" - 4" CLD 23 MLTPL
EFFUUD-01-LF 1/2" PEX Expansion Brass Lead Free Ball Valve + Drain 1/4" - 4" CLD 23 MLTPL
EFFUUD-01-P-LF 1/2" Exp. PEX Brass Lead Free Ball Valve + Drain w/ Btrfly Hdl 1/4" - 4" CLD 23 MLTPL
EFFUUD-02-E-LF 3/4" PEX Exp x 3/4" PEX Exp Ball Valve w/ Drain 1/4" - 4" CLD 23 MLTPL
EFFUUD-02-LF 3/4" PEX Expansion Brass Lead Free Ball Valve + Drain 1/4" - 4" CLD 23 MLTPL
EFFUUD-02-P-LF 3/4" Exp. PEX Brass Lead Free Ball Valve + Drain w/ Btrfly Hdl 1/4" - 4" CLD 23 MLTPL
EFFUUD-03-LF 1" PEX Expansion Brass Lead Free Ball Valve + Drain 1/4" - 4" CLD 23 MLTPL
EFFUUD-03-P-LF 1" Exp. PEX Brass Lead Free Ball Valve + Drain w/ Btrfly Hdl 1/4" - 4" CLD 23 MLTPL
EFFUUD-04-LF 1-1/4" PEX Expansion Brass Lead Free Ball Valve + Drain 1/4" - 4" CLD 23 MLTPL
MVA1002-LF 3/4" Exp. PEX Double 90 Elbow Ball Valve w/ Btrfly Hdl Lead Free 1/4" - 4" CLD 23 MLTPL
MVA1003-LF 1" Exp. PEX Double 90 Elbow Ball Valve w/ Btrfly Hdl Lead Free 1/4" - 4" CLD 23 MLTPL

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



 
Ebara HG ULC 
130 Addison Hall Circle
Unit 2 & 3 
Aurora, ON L4G 3X8 
Canada 
+1 905 726 2333
Visit this company's website


Facility : Aurora, Ontario, Canada

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Pumps [G]
A3U(A)(B)(C)(D)(E)(F)(I)-XX[1] 2x1 1/4 - 3 x2 1/2" CLD 23 MLTPL
ACDU(A)(B)(C)(D)(E)(F) 1 1/4x1 - 1 1/2 x1" CLD 23 MLTPL

[1] Sizes are expressed as suction x discharge.
        MODEL – A3U (END SUCTION CENTRIFUGAL)
        A3U(A)(B)(C)(D)(E)(F)(I)-XX:
        A = Speed
        None - 3450 RPM
        4 - 1725 RPM
        B = Discharge size
        32 - 1 1/4''
        40 - 1 1/2''
        50 - 2''
        65 - 2 1/2''
        C = Impeller performance code
        125
        160
        200
        D = Motor HP
        30 - 3
        50 - 5
        75 - 7.5
        100- 10
        150 - 15
        200 - 20
        250 - 25
        300 - 30
        E = Motor Enclosure
        D = ODP (Open drip proof)
        T = TEFC (Totally enclosed fan cooled)
        W = Washdown Motor Enclosure
        X = Explosion Proof Motor Enclosure
        F = Phase
        1 - single phase
        3 - three phase
        I = Mechanical Seal Type
        C = Carbon/Ceramic/Viton
        XX: SPECIAL CONFIGURATION
        None- no special configuration
        -575V- 575V motor
[2] Sizes are expressed as suction x discharge.
        MODEL – 2CDU (END SUCTION CENTRIFUGAL)
        2CDU(A)(B)6(C)(D)(E)-XX:
        A = Casing Size/Impeller Size
        70/
        120/
        200/
        B = Motor HP
        20 - 2
        30 - 3
        50 - 5
        C = Motor Enclosure
        T - TEFC (Totally enclosed fan cooled)
        D - ODP (Open drip proof)
        W = Washdown Motor Enclosure
        X = Explosion Proof Motor Enclosure
        D = Phase/Volt (V)
        3 - Three phase, 230/460 volt
        1 - Single phase, 115/230 volt
        E = Seal type
        C = Carbon/Ceramic/Viton
        XX: SPECIAL CONFIGURATION
        None- no special configuration
        -575V-=575V motor
[3] Sizes are expressed as suction x discharge.
        MODEL – JEU (END SUCTION SELF PRIMING)
        JEU(A)(B)(C)(D)(E)-XX:
        A = CASING/ IMPELLER SIZE
        806
        506
        B = Motor HP
        7 - 3/4
        10 - 1
        15 - 1-1/2
        20- 2
        C = Motor Enclosure
        D = ODP (Open drip proof)
        T = TEFC (Totally enclosed fan cooled)
        W = Washdown Motor Enclosure
        X = Explosion Proof Motor Enclosure
        D = Phase
        1 - single phase
        3 - three phase
        E = Seal type
        C = Carbon/Ceramic/Viton
        XX: SPECIAL CONFIGURATION
        None- no special configuration
        -575V-=575V motor
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



 
Ebara Pumps Americas Corporation 
1651 Cedar Line Drive
Rock Hill, SC 29730 
United States 
803-327-5005
Visit this company's website


Facility : Rock Hill, SC

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Pumps [G]
3U(A)(B)(C)(D)(E)(F)(I)-XX[1] [3] [4] [5] 2"x1 1/4"-3"x2 1/2" CLD 23 MLTPL
AEVMS(A)(B)(C)(D)(E)1-(W)(F)(X)(Y)(Z)[1] [6] 1-1/4" x 1-1/4" CLD 23 MLTPL
AEVMS(A)(B)(C)(D)(E)10-(W)(F)(X)(Y)(Z)[1] [6] 2" x 2" CLD 23 MLTPL
AEVMS(A)(B)(C)(D)(E)15-(W)(F)(X)(Y)(Z)[1] [6] 2" x 2" CLD 23 MLTPL
AEVMS(A)(B)(C)(D)(E)20-(W)(F)(X)(Y)(Z)[1] [6] 2" x 2" CLD 23 MLTPL
AEVMS(A)(B)(C)(D)(E)3-(W)(F)(X)(Y)(Z)[1] [6] 1-1/4" x 1-1/4" CLD 23 MLTPL
AEVMS(A)(B)(C)(D)(E)5-(W)(F)(X)(Y)(Z)[1] [6] 1-1/4" x 1-1/4" CLD 23 MLTPL
AEVMS(A)L(B)(C)(D)(E)1-(W)(F)(X)(Y)(Z)[1] [6] 1-1/4" x 1-1/4" CLD 23 MLTPL
AEVMS(A)L(B)(C)(D)(E)10-(W)(F)(X)(Y)(Z)[1] [6] 2" x 2" CLD 23 MLTPL
AEVMS(A)L(B)(C)(D)(E)15-(W)(F)(X)(Y)(Z)[1] [6] 2" x 2" CLD 23 MLTPL
AEVMS(A)L(B)(C)(D)(E)20-(W)(F)(X)(Y)(Z)[1] [6] 2" x 2" CLD 23 MLTPL
AEVMS(A)L(B)(C)(D)(E)3-(W)(F)(X)(Y)(Z)[1] [6] 1-1/4" x 1-1/4" CLD 23 MLTPL
AEVMS(A)L(B)(C)(D)(E)5-(W)(F)(X)(Y)(Z)[1] [6] 1-1/4" x 1-1/4" CLD 23 MLTPL
AEVMSU(A)(B)32-(W)(R) F (X)(Y)(Z) S[7] 2 1/2" x 2 1/2" CLD 23 MLTPL
AEVMSU(A)(B)45-(W)(R) F (X)(Y)(Z) S[7] 3" x 3" CLD 23 MLTPL
AEVMSU(A)(B)64-(W)(R) F (X)(Y)(Z) S[7] 4" x 4" CLD 23 MLTPL
AEVMSU(A)(B)90-(W)(R) F (X)(Y)(Z) S[7] 4" x 4" CLD 23 MLTPL
AEVMSUG(A)(B)32-(W)(R) F (X)(Y)(Z) S[7] 2 1/2" x 2 1/2" CLD 23 MLTPL
AEVMSUG(A)(B)45-(W)(R) F (X)(Y)(Z) S[7] 3" x 3" CLD 23 MLTPL
AEVMSUG(A)(B)64-(W)(R) F (X)(Y)(Z) S[7] 4" x 4" CLD 23 MLTPL
AEVMSUG(A)(B)90-(W)(R) F (X)(Y)(Z) S[7] 4" x 4" CLD 23 MLTPL
AEVMSUL(A)(B)32-(W)(R) F (X)(Y)(Z) S[7] 2 1/2" x 2 1/2" CLD 23 MLTPL
AEVMSUL(A)(B)45-(W)(R) F (X)(Y)(Z) S[7] 3" x 3" CLD 23 MLTPL
AEVMSUL(A)(B)64-(W)(R) F (X)(Y)(Z) S[7] 4" x 4" CLD 23 MLTPL
AEVMSUL(A)(B)90-(W)(R) F (X)(Y)(Z) S[7] 4" x 4" CLD 23 MLTPL
CDU(A)(B)(C)(D)(E)(F)[1] [8] 1 1/4"x1"-1 1/2"x1" CLD 23 MLTPL
EVMSU(A)(B)32-(W)(R) F (X)(Y)(Z) S[9] 2 1/2" x 2 1/2" CLD 23 MLTPL
EVMSU(A)(B)45-(W)(R) F (X)(Y)(Z) S[9] 3" x 3" CLD 23 MLTPL
EVMSU(A)(B)64-(W)(R) F (X)(Y)(Z) S[9] 4" x 4" CLD 23 MLTPL
EVMSU(A)(B)90-(W)(R) F (X)(Y)(Z) S[9] 4" x 4" CLD 23 MLTPL
EVMSUG(A)(B)32-(W)(R) F (X)(Y)(Z) S[9] 2 1/2" x 2 1/2" CLD 23 MLTPL
EVMSUG(A)(B)45-(W)(R) F (X)(Y)(Z) S[9] 3" x 3" CLD 23 MLTPL
EVMSUG(A)(B)64-(W)(R) F (X)(Y)(Z) S[9] 4" x 4" CLD 23 MLTPL
EVMSUG(A)(B)90-(W)(R) F (X)(Y)(Z) S[9] 4" x 4" CLD 23 MLTPL
EVMSUL(A)(B)32-(W)(R) F (X)(Y)(Z) S[9] 2 1/2" x 2 1/2" CLD 23 MLTPL
EVMSUL(A)(B)45-(W)(R) F (X)(Y)(Z) S[9] 3" x 3" CLD 23 MLTPL
EVMSUL(A)(B)64-(W)(R) F (X)(Y)(Z) S[9] 4" x 4" CLD 23 MLTPL
EVMSUL(A)(B)90-(W)(R) F (X)(Y)(Z) S[9] 4" x 4" CLD 23 MLTPL
GSDU(A)-100-(B)(C)(D)(E)(F)(G)[11] 5" x 4" CLD 23 MLTPL
GSDU(A)-125-(B)(C)(D)(E)(F)(G)[11] 6" x 5" CLD 23 MLTPL
GSDU(A)-150-(B)(C)(D)(E)(F)(G)[11] 8" x 6" CLD 23 MLTPL
GSDU(A)-32-(B)(C)(D)(E)(F)(G)[11] 2" x 1-1/4" CLD 23 MLTPL
GSDU(A)-40-(B)(C)(D)(E)(F)(G)[11] 2-1/2" x 1-1/2" CLD 23 MLTPL
GSDU(A)-50-(B)(C)(D)(E)(F)(G)[11] 2-1/2" x 2" CLD 23 MLTPL
GSDU(A)-65-(B)(C)(D)(E)(F)(G)[11] 3" x 2-1/2" CLD 23 MLTPL
GSDU(A)-80-(B)(C)(D)(E)(F)(G)[11] 4" x 3" CLD 23 MLTPL

[1] Size is expressed as suction x discharge.
[2] 2CDU Models 
    A - Casing Size/Impeller Size 
        70/
        120/
        200/ 
    B - Motor horsepower (hp) 
        20 - 2 
        30 - 3 
        50 - 5 
    C - Motor Enclosure 
        D - ODP (Open drip proof)
        T - TEFC (Totally enclosed fan cooled)
        W - Washdown Motor Enclosure 
        X - Explosion Proof Motor Enclosure
    D - Phase/Volt 
        1 - Single phase, 115/230 volt 
        3 - Three phase, 230/460 volt 
    E - Seal type 
        C - Carbon/Ceramic/Viton
[3] 3U Models
    A - Speed 
        None - 3450 RPM 
        4    - 1725 RPM 
    B - Discharge size 
        32 - 1 1/4" 
        40 - 1 1/2" 
        50 - 2"
        65 - 2 1/2" 
    C - Impeller performance code 
        125 
        160 
        200 
    "A", "B", "1", or "2" following the Impeller performance code designate a different
    design in the impeller.
    D - Motor horsepower (hp) 
        30 - 3 
        50 - 5 
        75 - 7.5 
        100- 10 
        150 - 15 
        200 - 20 
        250 - 25 
        300 - 30 
    E - Motor enclosure 
        D - ODP (Open drip proof) 
        T - TEFC (Totally enclosed fan cooled)
        W - Washdown Motor Enclosure
        X - Explosion Proof Motor Enclosure
    F - Phase 
        1 - Single phase 
        3 - Three phase 
    I - Mechanical Seal Type 
        C - Carbon/Ceramic/Viton 
    3U4 models indicate a 4 pole motor as opposed to the standard 2 pole motor.
[4] 3U model Certification does not include flange gaskets.
[5] XX - Special configuration (any 2 digit alpha numeric)
[6] AEVMSU, AEVMSUL Model
    A - Motor Bracket Type
        U - NEMA
        I - IEC (pm motor)
        C - IEC (induction motor)
    B - Motor Speed		
        None - 2 Pole (300 rpm)
        F    - 4 Pole (1800 rpm)		
    C - Pump Configuration		
        None - Vertical		
        H    - Horizontal		
    D - Working Pressure			
        None - Standard		
        P    - Uprated
    E - IEC Frame Size
        None - Standard frame
        A    - Smaller frame
        B    - Larger frame
    F - Piping Connection Type			
        F - Round Flange	
        N - Oval Flange		
        L - Loose Round Flange		
        V - Victaulic
        C - C
    W - Number of Impellers			
        1 - 29	
    X - Horsepower of Motor			
        0050 - 1/2 hp		
        0075 - 3/4 hp		
        0100 - 1.0 hp	
        0150 - 1.5 hp		
        0200 - 2.0 hp		
        0300 - 3.0 hp		
        0500 - 5.0 hp		
        0750 - 7.5 hp		
        1000 - 10 hp		
        1500 - 15 hp		
        2000 - 20 hp		
        2500 - 25 hp	
        3000 - 30 hp		
        4000 - 40 hp
        5000 - 50 hp		
    Y - Motor Type
        D - Open Drip Proof (ODP)
        T - Totally Enclosed Fan Cooled (TEFC)
        W - Washdown Motor Enclosure
        X - Explosion Proof Motor Enclosure
    Z - Motor Phase				
        1 - Single Phase
        3 - Three Phase		
    					
    "A" in the model name indicates sub-component design modifications.
    					
    Only the type "S" mechanical seal (Silicon Carbide/Carbon/FPM) is included in
    Certification.
[7] Size is expressed as suction end x discharge end.
    A - Pump Configuration
        none - Vertical
        H    - Horizontal
    B - Working Pressure
        none - Standard
        P    - Uprated
    W - number of impellers (-1 to -10)
    R - number of reduced diameter impellers (0-10)
    X - Horsepower of motor
        0050 - 1/2HP
        0075 - 3/4HP
        0100 - 1.0HP
        0150 - 1.5HP
        0200 - 2.0 HP
        0300 - 3.0 HP
        0500 - 5.0 HP
        0750 - 7.5 HP
        1000 - 10 HP
        1500 - 15 HP
        2000 - 20 HP
        2500 - 25 HP
        3000 - 30 HP
        4000 - 40 HP
        5000 - 50 HP
        6000 - 60 HP
        7500 - 75 HP
    Y - Motor Type
        D - Open Drip Proof (ODP)
        T - Totally Enclosed Fan Cooled (TEFC)
        W - Washdown Motor Enclosure
        X - Explosion Proof Motor Enclosure
    Z - Motor phase
        1 - single phase
        3 - three phase
[8] CDU Models 
    a - Nominal motor speed 
        Blank - 3600 rpm 
        4     - 1750 rpm 
    B - Casing size/impeller size 
        70/0
        70/1 
        70/3 
        70/5 
        120/1 
        120/3 
        120/5 
        200/1
        200/3 
        200/5 
    "A" and "B" in the model name designate a different design in the impeller.
    C - Motor horsepower (hp) 
        5  - 0.5
        7  - 0.75 
        10 - 1 
        15 - 1.5 
        20 - 2 
        30 - 3 
    D - Motor enclosure 
        D - ODP (Open drip proof) 
        T - TEFC (Totally enclosed fan cooled)
        W - Washdown Motor Enclosure
        X - Explosion Proof Motor Enclosure
    E - Motor phase   
        1 - single phase 
        3 - three phase 
    F - Mechanical seal type 
        C - Carbon/Ceramic/Viton
[9] Size is expressed as suction end x discharge end.
    
    A - Pump Configuration
        None - Vertical
        H - Horizontal
    B - Working Pressure
        None - Standard
        P - Uprated
    W - Number of impellers (1-10)
    R - Number of reduced diameter impellers (0-10)
    X - Horsepower of motor
        0050 - 1/2HP
        0075 - 3/4HP
        0100 - 1.0HP
        0150 - 1.5HP
        0200 - 2.0 HP
        0300 - 3.0 HP
        0500 - 5.0 HP
        0750 - 7.5 HP
        1000 - 10 HP
        1500 - 15 HP
        2000 - 20 HP
        2500 - 25 HP
        3000 - 30 HP
        4000 - 40 HP
        5000 - 50 HP
        6000 - 60 HP
        7500 - 75 HP
    Y - Motor Type
        D - Open Drip Proof (ODP)
        T - Totally Enclosed Fan Cooled (TEFC)
        W - Washdown Motor Enclosure
        X - Explosion Proof Motor Enclosure
    Z - Motor phase
        1 - Single phase
        3 - Three phase
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.
[10] JEU Models
     A - Housing and impeller number 
         806 
         1506 
     B - Motor horsepower (hp) 
         7 - 3/4 
         10 - 1 
         15 - 1-1/2 
         20- 2 
     C - Motor enclosure 
         D - ODP (Open drip proof) 
         T - TEFC (Totally enclosed fan cooled)
         W - Washdown Motor Enclosure
         X - Explosion Proof Motor Enclosure
     D - Phase 
         1 - Single phase 
         3 - Three phase 
     E - Seal type 
         C - Carbon/Ceramic/Viton
[11] Model trade names GSDU(A)-32-(B)(C)(D)(E)(F)(G):
     
     The number in trade name is discharge nozzle in mm
     
     A = Number of poles	
     	2 = 2-pole
     	4 = 4-pole	
     
     B = Nominal impeller diameter in millimeters	
     	125
     	125.1
     	160
     	160.1
     	200
     	200.1
     	250
     	315
     
     C = Motor hp x 10 (may be either 2 or digits)	
     
     D = Motor Enclosure	
     	T = TEFC
     	D = ODP
     	W = Washdown
     	X = Explosion Proof
     
     E = Motor Phase	
     	1 = Single Phase
     	3 = Three Phase
     
     F = Seal Code	
     	E = SiC/Carbon/EPDM/316SS (Only models with seal code ""E"" are certified)
     
     G = Configuration
              Blank = Pump and motor only
              R = Pump with motor and motor supports
              B = Package unit with base
     
     	
     Note: Up to 4 characters may be present after the seal code. These indicate special
     configurations with differences that do not involve wetted parts.

NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
      documentation shipped with the product are Certified.


Facility : Cles (TN), Italy

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Pumps[1] [G]
EVMSU(A)(B)(C)1-(W)(F)(X)(Y)(Z) S[2] 1 1/4" x 1 1/4" CLD 23 MLTPL
EVMSU(A)(B)(C)10-(W)(F)(X)(Y)(Z) S[2] 2" x 2" CLD 23 MLTPL
EVMSU(A)(B)(C)15-(W)(F)(X)(Y)(Z)S[2] 2" x 2" CLD 23 MLTPL
EVMSU(A)(B)(C)20-(W)(F)(X)(Y)(Z) S[2] 2" x 2" CLD 23 MLTPL
EVMSU(A)(B)(C)3-(W)(F)(X)(Y)(Z) S[2] 1 1/4" x 1 1/4" CLD 23 MLTPL
EVMSU(A)(B)(C)5-(W)(F)(X)(Y)(Z) S[2] 1 1/4" x 1 1/4" CLD 23 MLTPL
EVMSU(A)(B)32- (W)(R) F (X)(Y)(Z) S[3] 2 1/2" x 2 1/2" CLD 23 MLTPL
EVMSU(A)(B)45- (W)(R) F (X)(Y)(Z) S[3] 3" x 3" CLD 23 MLTPL
EVMSU(A)(B)64- (W)(R) F (X)(Y)(Z) S[3] 4" x 4" CLD 23 MLTPL
EVMSU(A)(B)90- (W)(R) F (X)(Y)(Z) S[3] 4" x 4" CLD 23 MLTPL
EVMSUG(A)(B)32- (W)(R) F (X)(Y)(Z) S[3] 2 1/2" x 2 1/2" CLD 23 MLTPL
EVMSUG(A)(B)45- (W)(R) F (X)(Y)(Z) S[3] 3" x 3" CLD 23 MLTPL
EVMSUG(A)(B)64- (W)(R) F (X)(Y)(Z) S[3] 4" x 4" CLD 23 MLTPL
EVMSUG(A)(B)90- (W)(R) F (X)(Y)(Z) S[3] 4" x 4" CLD 23 MLTPL
EVMSUL(A)(B)(C)1-(W)(F)(X)(Y)(Z) S[2] 1 1/4" x 1 1/4" CLD 23 MLTPL
EVMSUL(A)(B)(C)10-(W)(F)(X)(Y)(Z) S[2] 2" x 2" CLD 23 MLTPL
EVMSUL(A)(B)(C)15-(W)(F)(X)(Y)(Z) S[2] 2" x 2" CLD 23 MLTPL
EVMSUL(A)(B)(C)20-(W)(F)(X)(Y)(Z) S[2] 2" x 2" CLD 23 MLTPL
EVMSUL(A)(B)(C)3-(W)(F)(X)(Y)(Z) S[2] 1 1/4" x 1 1/4" CLD 23 MLTPL
EVMSUL(A)(B)(C)5-(W)(F)(X)(Y)(Z) S[2] 1 1/4" x 1 1/4" CLD 23 MLTPL
EVMSUL(A)(B)32- (W)(R) F (X)(Y)(Z) S[3] 2 1/2" x 2 1/2" CLD 23 MLTPL
EVMSUL(A)(B)45- (W)(R) F (X)(Y)(Z) S[3] 3" x 3" CLD 23 MLTPL
EVMSUL(A)(B)64- (W)(R) F (X)(Y)(Z) S[3] 4" x 4" CLD 23 MLTPL
EVMSUL(A)(B)90- (W)(R) F (X)(Y)(Z) S[3] 4" x 4" CLD 23 MLTPL

[1] Size is expressed as suction end x discharge end.
[2] A - Motor Speed
        None - 2 Pole (300 rpm)
        F    - 4 Pole (1800 rpm)
    B - Pump Configuration
        None - Vertical
        H    - Horizontal
    C - Working Pressure
        None - Standard
        P    - Uprated 
    F - Piping Connection Type
        F - Round flange
        N - Oval flange
        L - Loose round flange
        V - Victaulic
        C - Clamp
    W - Number of Impellers
        1 - 29
    X - Horsepower of Motor
        0050 - 1/2 hp
        0075 - 3/4 hp
        0100 - 1.0 hp
        0150 - 1.5 hp
        0200 - 2.0 hp
        0300 - 3.0 hp
        0500 - 5.0 hp
        0750 - 7.5 hp
        1000 - 10 hp
        1500 - 15 hp
        2000 - 20 hp
        2500 - 25 hp
        3000 - 30 hp
        4000 - 40 hp
        5000 - 50 hp
    Y - Motor Type
        D - Open drip proof (ODP)
        T - Totally enclosed fan cooled (TEFC)
        W - Washdown Motor Enclosure
        X - Explosion Proof Motor Enclosure
    Z - Motor phase
        1 - Single phase
        3 - Three phase
    
    "A" in the model name indicates sub-component design modifications.
    
    Only the type "S" mechanical seal (Silicon Carbide/Carbon/FPM) is included in
    Certification.
[3] A - Pump Configuration
        None - Vertical
        H    - Horizontal
    B - Working Pressure
        None - Standard
        P    - Uprated
    W - Number of impellers (1-10)
    R - Number of reduced diameter impellers (0-10)
    X - Horsepower of motor
        0050 - 1/2HP
        0075 - 3/4HP
        0100 - 1.0HP
        0150 - 1.5HP
        0200 - 2.0 HP
        0300 - 3.0 HP
        0500 - 5.0 HP
        0750 - 7.5 HP
        1000 - 10 HP
        1500 - 15 HP
        2000 - 20 HP
        2500 - 25 HP
        3000 - 30 HP
        4000 - 40 HP
        5000 - 50 HP
        6000 - 60 HP
        7500 - 75 HP
    Y - Motor Type
        D - Open Drip Proof (ODP)
        T - Totally Enclosed Fan Cooled (TEFC)
        W - Washdown Motor Enclosure
        X - Explosion Proof Motor Enclosure
    Z - Motor phase
        1 - Single phase
        3 - Three phase
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



 
EBRO Armaturen Gebr. Bröer GmbH 
Karlstrasse 8
Hagen 58135 
Germany 
49 233 190 40
Visit this company's website


Facility : Hagen, Germany

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Valves[1] [G]
Butterfly Valve F012-K1 150 mm - 1200 mm D. HOT MLTPL
Butterfly Valve Z011-A 50 mm - 600 mm D. HOT MLTPL
Butterfly Valve Z014-A 50 mm - 600 mm D. HOT MLTPL

[1] Certification requested for EPDM seat and stainless steel disc only.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



Facility : Chonburi, Thailand

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Valves[1] [G]
Butterfly Valve F012-K1 150 mm - 1200 mm D. HOT MLTPL
Butterfly Valve Z011-A 50 mm - 600 mm D. HOT MLTPL
Butterfly Valve Z014-A 50 mm - 600 mm D. HOT MLTPL

[1] Certification requested for EPDM seat and stainless steel disc only.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



 
ECOSOFT SPC Ltd. 
1i, Pokrovska
Irpin, Kyiv region 
Ukraine 
38 044 490 34 54


Facility : # 1 China

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Reverse Osmosis Element[1] [G]
ECOSOFT BW-4040 4" x 40" CLD 23 MLTPL
ECOSOFT BW-8040 8" x 40" CLD 23 MLTPL
ECOSOFT BWFR-4040 4" x 40" CLD 23 MLTPL
ECOSOFT BWFR-8040 8" x 40" CLD 23 MLTPL
ECOSOFT HF-4040 4" x 40" CLD 23 MLTPL
ECOSOFT HF-8040 8" x 40" CLD 23 MLTPL
ECOSOFT HFFR-4040 4" x 40" CLD 23 MLTPL
ECOSOFT HFFR-8040 8" x 40" CLD 23 MLTPL
ECOSOFT HR-4040 4" x 40" CLD 23 MLTPL
ECOSOFT HR-8040 8" x 40" CLD 23 MLTPL
ECOSOFT HRFR-4040 4" x 40" CLD 23 MLTPL
ECOSOFT HRFR-8040 8" x 40" CLD 23 MLTPL

[1] ECOSOFT HF-4040 and ECOSOFT HR-4040 require a pre-service flush at 1.875 gallons per
    minute (gpm) for 6 hours using tap water.
    ECOSOFT HF-8040, ECOSOFT HR-8040 and ECOSOFT BW-8040 require a pre-service flush at 8.33
    gallons per minute (gpm) for 6 hours using tap water.
    ECOSOFT HRFR-8040 and ECOSOFT BWFR-8040 require a pre-service flush at 7.29 gallons per
    minute (gpm) for 6 hours using tap water.
    ECOSOFT BW-4040 and ECOSOFT BWFR-4040 require a pre-service flush at 1.67 gallons per
    minute (gpm) for 6 hours using tap water.
    ECOSOFT HFFR-8040 requires a pre-service flush at 9.71 gallons per minute (gpm) for 6
    hours using tap water.
    ECOSOFT HRFR-4040 requires a pre-service flush at 1.53 gallons per minute (gpm) for 6
    hours using tap water.
    ECOSOFT HFFR-4040 requires a pre-service flush at 2.153 gallons per minute (gpm) for 6
    hours using tap water.
    ECOSOFT HRFR-4040 is certified for a minimum daily flow of 2200 gallons per day for use
    in public water treatment facilities.
    ECOSOFT BW-4040 and ECOSOFT BWFR-4040 are certified for a minimum daily flow of 2400
    gallons per day for use in public water treatment facilities.
    ECOSOFT HF-4040 and ECOSOFT HR-4040 are certified for a minimum daily flow of 2700
    gallons per day for use in public water treatment facilities.
    ECOSOFT HFFR-4040 is certified for a minimum daily flow of 3100 gallons per day for use
    in public water treatment facilities.
    ECOSOFT HRFR-8040 and ECOSOFT BWFR-8040 are certified for a minimum daily flow of 10500
    gallons per day for use in public water treatment facilities.
    ECOSOFT HF-8040, ECOSOFT HR-8040 and ECOSOFT BW-8040 are certified for a minimum daily
    flow of 12000 gallons per day for use in public water treatment facilities.
    ECOSOFT HFFR-8040 is certified for a minimum daily flow of 14000 gallons per day for use
    in public water treatment facilities.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



 
EcoWater Systems LLC 
1890 Woodlane Drive 
Woodbury, MN 55125 
United States 
651-739-5330


Facility : Iuka, MS

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Components, POE: Tanks, Water Softener[G]
7169457 23.27 gal. CLD 23 MLTPL
7172638 23.27 gal. CLD 23 MLTPL

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



Facility : Ripley, MS

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Components, POE: Tanks, Water Softener[G]
7092202 12.97 gal. CLD 23 MLTPL
7172638 23.27 gal. CLD 23 MLTPL
7247996 10.57 gal. CLD 23 MLTPL
7298743 67.28 gal. CLD 23 MLTPL
7394345 10.57 gal. CLD 23 MLTPL
7394353 12.97 gal. CLD 23 MLTPL
7394361 23.26 gal. CLD 23 MLTPL
7402813 23.26 gal. CLD 23 MLTPL

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



 
EcoWater Systems LLC 
P.O. Box 64420
St. Paul, MN 55164 
United States 
800-869-2837 
651-739-5530
Visit this company's website


Facility : 1A China

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Components, POE: Tanks, Water Softener
7391818 196.8 gal CLD 23 MLTPL
7391828 262.4 gal CLD 23 MLTPL



 
ECS Environmental Solutions 
2201 Taylors Valley Road
Belton, TX 76513 
United States 
254-933-2270
Visit this company's website


Facility : Belton, TX

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Miscellaneous Process Devices/Components[1] [G]
Degasifier >= 3 gal CLD 23 MLTPL

[1] Certified for a minimum daily flow of 28,800 gallons.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



 
EKM Metering Inc. 
122 Benito Avenue
Santa Cruz, CA 95062 
United States 
831-425-7371


Facility : Ningbo, China

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Water Meters[G]
SPWM-0625x050-HD-NSF 5/8" x 1/2" CLD 23 MLTPL
SPWM-0625x075-HD-NSF 5/8" x 3/4" CLD 23 MLTPL
SPWM-075-HD-NSF 3/4" CLD 23 MLTPL
SPWM-100-NSF 1" CLD 23 MLTPL
SPWM-150-NSF 1 1/2" CLD 23 MLTPL
SPWM-200-NSF 2" CLD 23 MLTPL
VSPWM-075-HD-NSF 3/4" CLD 23 MLTPL

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



 
Elgin Separation Solutions / Norris Screen & Mfg. 
5 South High Street
Canal Winchester, OH 43110 
United States 
614-524-4588
Visit this company's website


Facility : North Tazewell, VA

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Miscellaneous Process Devices/Components[1] [2] [G]
Elgin Flat Panel Screens [3] CLD 23 MLTPL
Fittings with Jacquelyn™ Coating[4] >= 6" CLD 23 MLTPL

[1] All products are Certified for use with water treatment plant intake systems with a
    minimum daily flow of 10,000 gallons.
[2] Screens may be constructed of 90/10 Copper Nickel, Stainless Steel 304, Stainless Steel
    316, and Jacquelyn™ Coated Stainless Steel 304 or 316 material.
[3] Intake screens are Certified for all sizes.
[4] Intake Pipes and Fittings are Certified for a maximum length of 26 feet in water
    treatment plant intake systems.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



 
Elite Valve 
2305 Wyecroft Road
Oakville, ON L6L 6R2 
Canada 
519-756-3100
Visit this company's website


Facility : Huangdao, China

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Valves[1] [G]
(a)(b)(c)(d)4(e)34(f) Elite Valve Butterfly Valves 2" - 72" CLD 23 MLTPL

[1] (a) Valve size in inches (02-72)
    (b) Style of valve:
        - A/B (Wafer)
        - C (Lug)
        - D (Flange)
    (c) Body material:
        - 1 (Cast Iron)
        - 2 (Ductile Iron)
        - 3 WCB (carbon steel)
        - 4 CF8M (316 SS)
        - B (Bronze)
    (d) Pressure rating:
        - 2 (285 PSI max)
        - 3 (275 PSI max)
        - 4 (250 PSI max)
        - 5 (200 psi max)
        - 6 (232 psi max)
        - 7 (150 psi max)
        - 8 (125 psi max)
    (e) Stem material:
        - 1,6 (416 SS)
        - 4 (316 SS)
        - 5 (17-4 PH)
    (f) Operator:
        - 3 (lever)
        - 5 (gear)
        - 6 (DA actuator)
        - 7 (FC actuator)
        - 8 (FO actuator)
        - 9 (electric)
        - C (nut)
        - U (chain wheel)
        - X (bare stem)
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



 
eltherm production GmbH 
Ernst-Heinkel-Strasse, 6-10
57299 Burbach 
Germany 
49 273 644 130
Visit this company's website


Facility : Burbach, Germany

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Miscellaneous Process Devices/Components[1] [2]
EL-ECMF 5 mm CLD 23 SLC

[1] Certification requested for 1 end cap per liter.
[2] Certification will not include heating cables or silicone glue.



 
Emerson - Rosemount, Micro Motion Inc. 
12001 Technology Drive
Eden Prairie, MN 55344-3695 
United States 
952-828-3125


Facility : Nanjing, China

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Water Meters[1] [G]
Rosemount Model 8705[A][B][C][D][E][F][G][H][I][J][K][L][M][2] .5" - 36" C. HOT MLTPL
Rosemount Model 8705[A][B][C][D][E][F][G][H][I][J][K][L][M][2] .5" - 36" CLD 23 MLTPL
Rosemount Model 8711[A][B][C][D][E][F][G][H][I][J][K][L][3] .5" - 8" CLD 23 MLTPL
Rosemount Model 8711[A][B][C][D][E][F][G][H][I][J][K][L][3] .5" - 8" C. HOT MLTPL
Rosemount Model 8750W[A][B][C][D][E][F][G][H][I][J][K][L][M][4] .5" - 40" C. HOT MLTPL
Rosemount Model 8750W[A][B][C][D][E][F][G][H][I][J][K][L][M][4] .5" - 40" CLD 23 MLTPL

[1] All NSF-61 approved products must have the "DW" option code.
[2] 8705[A][B][C][D][E][F][G][H][I][J][K][L][M]
    A - Liner Material: T
    B - Electrode Material: S or H
    C - Electrode Type: A, B, E or F
    D - Line Size: 005, 010, 015, 020, 025, 030, 040, 050, 060, 080, 100, 120, 140, 160,
    180, 200, 240, 300, or 360.  (Where 360 = 36 inches)
    E - Flange Type = any one alpha or digital character
    F - Flange Rating = any one alpha or digital character
    G - Coil Housing Configuration = Any two-digit alpha or numeric characters
    H - Safety Approval = Any zero to two-digit alpha or numeric characters
    I - Submersion Protection = Any zero to three-digit alpha or numeric characters
    J - Grounding Rings:  G1, G2, G5 or G6
    K - Any 0 to 50-digit alpha or numeric characters
    L - Drinking Water Certification: DW
    M - Any 0 to 50-digit alpha or numeric characters
    8705[A][B][C][D][E][F][G][H][I][J][K][L][M]
    A - Liner Material: T
    B - Electrode Material: S or H
    C - Electrode Type: A, B, E or F
    D - Line Size: 005, 010, 015, 020, 025, 030, 040, 050, 060, 080, 100, 120, 140, 160,
    180, 200, 240, 300, or 360.  (Where 360 = 36 inches)
    E - Flange Type = any one alpha or digital character
    F - Flange Rating = any one alpha or digital character
    G - Coil Housing Configuration = Any two-digit alpha or numeric characters
    H - Safety Approval = Any zero to two-digit alpha or numeric characters
    I - Submersion Protection = Any zero to three-digit alpha or numeric characters
    J - Grounding Rings:  G1, G2, G5 or G6
    K - Any 0 to 50-digit alpha or numeric characters
    L - Drinking Water Certification: DW
    M - Any 0 to 50-digit alpha or numeric characters
    
[3] 8711[A][B][C][D][E][F][G][H][I][J][K][L]
    A - Liner Material: S
    B - Electrode Material: S or H
    C - Electrode Type: A, B, E or F
    D - Line Size: 005, 010, 015, 020, 025, 030, 040, 050, 060, or 080.  (Where 080 = 8
    inches)
    E - Transmitter Mount: any one alpha or digital character
    F - Mating Flange = any one alpha or digital character
    G - Safety Approval = Any zero to two-digit alpha or numeric characters
    H - Submersion Protection = Any zero to three-digit alpha or numeric characters
    I - Grounding Rings:  G1, G2, G5 or G6
    J - Any 0 to 50-digit alpha or numeric characters
    K - Drinking Water Certification: DW
    L - Any 0 to 50-digit alpha or numeric characters
    
[4] 8750W[A][B][C][D][E][F][G][H][I][J][K][L][M]
    A - Sensor Design Revision: any one alpha or digital character
    B - Transmitter Class: any one alpha or digital character
    C - Transmitter Power: any one alpha or digital character
    D - Conduit Entries: any one alpha or digital character
    E - Sensor style: any one alpha or digital character
    F - Liner Material: T 
    G - Electrode Material: S or H 
    H - Electrode Type: A, B, E or F 
    I - Line Size: 005, 010, 015, 020, 025, 030, 040, 050, 060, 080, 100, 120, 140, 160,
    180, 200,
    240, 300, 360, or 400.  (Where 400 = 40 inches)
    J - Any 0 to 50-digit alpha or numeric characters
    K - Grounding Rings:  G1, G2, G5 or G6
    L - Drinking Water Certification: DW
    M - Any 0 to 50-digit alpha or numeric characters
    
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements
    for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



Facility : Chihuahua, Mexico

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Water Meters[1] [G]
Rosemount Model 8705 [A][B][C][D][E][F][G][H][I][J][K][L][M] [9] [PFAS] 0.5 - 36 C. HOT MLTPL
Rosemount Model 8705[A][B][C][D][E][F][G][H][I][J][K][L][M][2] [3] .5" - 36" CLD 23 MLTPL
Rosemount Model 8705[A][B][C][D][E][F][G][H][I][J][K][L][M][4] .5" - 36" C. HOT MLTPL
Rosemount Model 8711[A][B][C][D][E][F][G][H][I][J][K][L][6] .5" - 8" C. HOT MLTPL
Rosemount Model 8711[A][B][C][D][E][F][G][H][I][J][K][L][3] [5] .5" - 8" CLD 23 MLTPL
Rosemount Model 8750W [A][B][C][D][E][F][G][H][I][J][K][L][M][N][O][10] [PFAS] .5 - 36 C. HOT MLTPL
Rosemount Model 8750W[A][B][C][D][E][F][G][H][I][J][K][L][M][N][O][3] [7] .5" - 48" CLD 23 MLTPL
Rosemount Model 8750W[A][B][C][D][E][F][G][H][I][J][K][L][M][N][O][8] .5" - 48" C. HOT MLTPL
Rosemount Model MS [A][B][C][D][E][F][G][H][I][J][K][L][11] [PFAS] 0.5 - 36 C. HOT MLTPL

[1] All NSF-61 approved products must have the "DW" option code.
[2] 8705 [A][B][C][D][E][F][G][H][I][J][K][L][M]
    A - Liner Material - T (Line sizes - 0.5 inch to 36 inch) or P (Line sizes - 4 inch to 
        36 inch)
    B - Electrode Material - S or H
    C - Electrode Type - A, B, E or F
    D - Line Size - 005**, 010**, 015**, 020**, 025**, 030**, 040, 050, 060, 080, 100, 120, 
        140, 160, 180, 200, 240, 300, or 360.  (Where 360 = 36 inches) (** Line size 
        authorized for only Liner Material -  T)
    E - Flange Type - any one alpha or digital character
    F - Flange Rating - any one alpha or digital character
    G - Coil Housing Configuration - any two-digit alpha or numeric characters
    H - Safety Approval - any zero to two-digit alpha or numeric characters
    I - Submersion Protection - any zero to three-digit alpha or numeric characters
    J - Grounding Rings - G1, G2, G5, G6 or no characters
    K - Additional Options - any 0 to 50-digit alpha or numeric characters
    L - Drinking Water Certification - DW
    M - Additional Options - any 0 to 50-digit alpha or numeric characters
[3] Certification includes electrodes and optional grounding rings made from 316 Stainless
    Steel or Nickel alloy. Certification does not include grounding rings from any other
    material or lining protectors.
[4] 8705[A][B][C][D][E][F][G][H][I][J][K][L][M]
    A - Liner Material - T
    B - Electrode Material - S or H
    C - Electrode Type - A, B, E or F
    D - Line Size - 005, 010, 015, 020, 025, 030, 040, 050, 060, 080, 100, 120, 140, 160, 
        180, 200, 240, 300, or 360.  (Where 360 = 36 inches)
    E - Flange Type - any one alpha or digital character
    F - Flange Rating - any one alpha or digital character
    G - Coil Housing Configuration - any two-digit alpha or numeric characters
    H - Safety Approval - any zero to two-digit alpha or numeric characters
    I - Submersion Protection - any zero to three-digit alpha or numeric characters
    J - Grounding Rings - G1, G2, G5, G6 or no characters
    K - Additional Options - any 0 to 50-digit alpha or numeric characters
    L - Drinking Water Certification - DW
    M - Additional Options - any 0 to 50-digit alpha or numeric characters
[5] 8711 [A][B][C][D][E][F][G][H][I][J][K][L]
    A - Liner Material - S
    B - Electrode Material - S or H
    C - Electrode Type - A, B, E or F
    D - Line Size - 005, 010, 015, 020, 025, 030, 040, 050, 060, or 080. 
        (Where 080 = 8 inches)
    E - Transmitter Mount -  any one alpha or digital character
    F - Mating Flange - any one alpha or digital character
    G - Safety Approval - any zero to two-digit alpha or numeric characters
    H - Submersion Protection - any zero to three-digit alpha or numeric characters
    I - Grounding Rings - G1, G2, G5, G6 or no characters 
    J - Any 0 to 50-digit alpha or numeric characters
    K - Drinking Water Certification - DW
    L - Any 0 to 50-digit alpha or numeric characters
[6] 8711[A][B][C][D][E][F][G][H][I][J][K][L]
    A - Liner Material - S
    B - Electrode Material - S or H
    C - Electrode Type - A, B, E or F
    D - Line Size - 005, 010, 015, 020, 025, 030, 040, 050, 060, or 080.  
        (Where 080 = 8 inches)
    E - Transmitter Mount - any one alpha or digital character
    F - Mating Flange - any one alpha or digital character
    G - Safety Approval - any zero to two-digit alpha or numeric characters
    H - Submersion Protection - any zero to three-digit alpha or numeric characters
    I - Grounding Rings - G1, G2, G5, G6 or no characters 
    J - Any 0 to 50-digit alpha or numeric characters
    K - Drinking Water Certification - DW
    L - Any 0 to 50 - digit alpha or numeric characters
[7] 8750W [A][B][C][D][E][F][G][H][I][J][K][L][M][N][O]
    A - Sensor Design Revision - any one alpha or digital character
    B - Transmitter Class - any one alpha or digital character
    C - Transmitter Mount - any one alpha or digital character
    D - Transmitter Power - any one alpha or digital character
    E - Transmitter Outputs - any one alpha or digital character
    F - Conduit Entries - any one alpha or digital character
    G - Sensor style - any one alpha or digital character
    H - Liner Material - T (Line sizes - 0.5 inch to 48 inch) or P (Line sizes - 4 inch to 
        48 inch)
    I - Electrode Material - S or H
    J - Electrode Type - A, B, E or F
    K - Line Size - 005**, 010**, 015**, 020**, 025**, 030**, 040, 050, 060, 080, 100, 120, 
        140, 160, 180, 200, 240, 300, 360, 400,420, or 480.  (Where 480 = 48 inches) 
        (** Line size authorized for only Liner Material - T)
    L - Flange Type, Flange Rating, Flange Material, Safety Approvals, and Other options - 
        any three to 50-digit alpha or numeric characters
    M - Grounding Rings - G1, G2, G5, G6 or no characters 
    N - Drinking Water Certification - DW
    O - Additional Options - any 0 to 50-digit alpha or numeric characters
[8] 8750W[A][B][C][D][E][F][G][H][I][J][K][L][M][N][O]
    A - Sensor Design Revision - any one alpha or digital character
    B - Transmitter Class - any one alpha or digital character
    C - Transmitter Mount - any one alpha or digital character
    D - Transmitter Power - any one alpha or digital character
    E - Transmitter Outputs - any one alpha or digital character
    F - Conduit Entries - any one alpha or digital character
    G - Sensor style - any one alpha or digital character
    H - Liner Material - T
    I - Electrode Material - S or H 
    J - Electrode Type - A, B, E or F 
    K - Line Size - 005, 010, 015, 020, 025, 030, 040, 050, 060, 080, 100, 120, 140, 160, 
        180, 200,240, 300, 360, 400,420, or 480.  (Where 480 = 48 inches) 
    L - Flange Type, Flange Rating, Flange Material, Safety Approvals, and Other options - 
        Any three to 50-digit alpha or numeric characters
    M - Grounding Rings - G1, G2, G5, G6 or no characters 
    N - Drinking Water Certification - DW
    O - Additional Options - Any 0 to 50-digit alpha or numeric characters
[9] 8705[A][B][C][D][E][F][G][H][I][J][K][L][M]
     A: Liner Material: H
     B: Electrode Material: S or H
     C: Electrode Type: A, B, E or F
     D:  Line Size: 005, 010, 015, 020, 025, 030, 040, 050, 060, 080, 100, 120, 140, 160,
    180, 200, 240, 300, or 360.  (Where 360 = 36 inches)
     E: Flange Type = any one alpha or digital character
     F: Flange Rating = any one alpha or digital character
     G: Coil Housing Configuration = Any two-digit alpha or numeric characters
     H: Safety Approval = Any zero to two-digit alpha or numeric characters
      I: Submersion Protection = Any zero to three-digit alpha or numeric characters
     J: Grounding Rings: G1, G2, G5, G6 or no characters
     K: Additional Options:  Any 0 to 50-digit alpha or numeric characters
     L: Drinking Water Certification: DW
     M: Additional Options:   Any 0 to 50-digit alpha or numeric characters
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.
[10] 8750W[A][B][C][D][E][F][G][H][I][J][K][L][M][N][O]
       A: Sensor Design Revision: any one alpha or digital character
       B: Transmitter Class: any one alpha or digital character
       C: Transmitter Mount: any one alpha or digital character
       D: Transmitter Power: any one alpha or digital character
       E: Transmitter Outputs: any one alpha or digital character
       F:  Conduit Entries: any one alpha or digital character
       G: Sensor style: any one alpha or digital character
       H: Liner Material: H
       I: Electrode Material: S or H 
       J: Electrode Type: A, B, E or F 
       K: Line Size: 005, 010, 015, 020, 025, 030, 040, 050, 060, 080, 100, 120, 140, 160,
     180, 200, 240, 300 or 360.  (Where 360 = 36 inches) 
       L: Flange Type, Flange Rating, Flange Material, Safety Approval
       M: Grounding Rings: G1, G2, G5, G6 or no characters 
       N: Drinking Water Certification: DW
       O: Additional Options:  Any 0 to 50-digit alpha or numeric characters
[11] MS [A][B][C][D][E][F][G][H][I][J][K][L][M]
      A - Line Size - 005, 010, 015, 020, 025, 030, 040, 050, 060, 080, 100, 120,140, 160,
     180, 200, 240, 300, or 360.  (Where 360 = 36 inches)    
      B – Revision level A
      C – Mounting configuration – Remote Mount
      D – Conduit Entries – ½ NPT or M20    
      E - Liner Material - H 
      F - Electrode Material - S or H
      G – Electrode Type- A, B, E or F
      H – Flange Material- any one alpha or digital character
      I - Flange Type - any one alpha or digital character
      J - Flange Rating - any one alpha or digital character
      K - Coil Housing Configuration - any two-digit alpha or numeric characters
      L - Safety Approval - any zero to two-digit alpha or numeric characters
      M – Grounding Rings - G1, G2, G5, G6 or no characters
      N - Drinking Water Certification – DW
      O - Additional Options - any 0 to 50-digit alpha or numeric characters
[PFAS] Complies with US EPA Maximum Contaminant Levels (MCLs) for PFAS according to
      NSF/ANSI/CAN 61.



 
Emerson Automation Solutions Final Control Netherlands BV 
Lage Mosten 37-47
4822 NK Breda 
The Netherlands 
31 76 543 4100


Facility : Talegaon, India

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Valves[1] [G]
Keystone F221 Wafer Style Resilient Seated Bi-Directional Butterfly Valve[2] [3] 50 mm - 500 mm CLD 23 MLTPL
Keystone F222 Lugged Style Resilient Seated Bi-Directional Butterfly Valve[2] [3] 50 mm - 500 mm CLD 23 MLTPL
Keystone F920 Lugged Style Resilient Seated Bi-Directional Butterfly Valve[3] 50 mm - 500 mm CLD 23 MLTPL
Keystone F990 Wafer Style Resilient Seated Bi-Directional Butterfly Valve[3] 50 mm - 500 mm CLD 23 MLTPL
Keystone Series GRF Double Flanged Resilient Seated Bi-Direction Butterfly Valve[3] 600 mm - 1800 mm CLD 23 MLTPL
Keystone Series GRL Lugged Style Resilient Seated Bi-Direction Butterfly Valve[3] 50 mm - 900 mm CLD 23 MLTPL
Keystone Series GRW Wafer Style Resilient Seated Bi-Direction Butterfly Valve[3] 50 mm - 900 mm CLD 23 MLTPL

[1] Only products bearing the NSF Mark on the product, product packaging, and/or
    documentation shipped with the product are Certified.
[2] Only those models with a 316 stainless steel disc or nylon coated disc and EPDM seat are
    Certified.
[3] Only those models with a 316 stainless steel disc or nylon coated disc and EPDM seat are
    Certified.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



 
Emerson Automation Solutions Final Control S.R.L. 
Via Piacenza SNC
Lugagnano val d'Arda 
29018 Piacenza 
Italy 
39 05 23890366


Facility : Piacenza, Italy

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Valves
Vanessa Series 30,000-W - Triple Offset Valve Water 8" - 144" CLD 23 MLTPL



 
Empresas Suárez S.A. de C.V 
Avenida México Japón 156
Ciudad Industrial de Celaya 
Celaya, Guanajuato 38010 
Mexico 
52 461 611 6455
Visit this company's website


Facility : Celaya, Guanajuato, Mexico

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Pumps [G]
AXIAL FLOW #PO-1A[1] [2] 8" - 30" CLD 23 MLTPL
MIXED FLOW #MFX-nA[1] [3] 8" - 24" CLD 23 MLTPL
VERTICAL TURBINE #FF-n$[4] [5] 5" - 28" CLD 23 MLTPL

[1] The variables in the trade name code "#MFX-nA" denote the following in Mixed Flow pumps:
    - #: size of pump (in)
    - n: number of blades. Options: 1, 2, 3
    
    The variable "#" in the trade name code "#PO-1A" in Axial Flow pumps denotes the size of
    the pump in inches.
[2] Axial flow pumps are Certified for a minimum daily flow of 1,044,000 gallons.
[3] Mixed flow pumps are Certified for a minimum daily flow of 1,808,640 gallons.
[4] The variables in the trade name code "#FF-n$" denote the following:
    - #: size of pump (in)
    - FF: family. Options: WH, WL, HH, WBH, WBL, CC, HXH, LS, MS, Z, WM
    - n: number of blades. Options: 1, 2, 3
    - $: configuration. Options: C (closed), A (open)
[5] Certified for a minimum daily flow of 18,720 gallons.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

Pumps - Submersible Pumps - Pump Ends [G]
SUBMERSIBLE #FF-nC[6] [7] [8] 5" - 12" CLD 23 MLTPL

[6] The variables in the trade name code "#FF-nC" denote the following:
    - #: size of pump (in)
    - FF: family. Options: WH, WL, HH, WBH, WBL, CC, HXH
    - n: number of blades. Options: 1, 2
[7] Certified for a minimum daily flow of 31,680 gallons.
[8] Certification does not include pump cables or motor.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



 
Endress + Hauser Flowtec AG 
Kaegenstrasse 7
Reinach BL 1 
CH-4153 
Switzerland 
41 61 7156111


Facility : Chhatrapati Sambhajinagar, India

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Water Meters [G]
Picomag Insertion / Version FKM 25 mm CLD 23 MLTPL

[1] Liner: Polyamide
    Electrode Options: 1.4435/316L SS
[2] Liner: Polyurethane
    Electrode Options: 1.4435/316L SS, Alloy C-22
[3] Only products bearing the NSF Mark on the product, product packaging, and/or
    documentation shipped with the product are Certified.
[4] Liner: Hard Rubber
    Electrode Options: 1.4435/316L SS, Alloy C-22
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



 
Endress + Hauser SE + Co. KG 
Hauptstrasse1
79689 Maulburg 
Germany 
49 7622 28 1957
Visit this company's website


Facility : Greenwood, IN

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Switches/Sensors[1] [2]
Deltabar FMD71 [6] CLD 23 MLTPL
Deltabar FMD72 [6] CLD 23 MLTPL
Deltapilot M FMB50 [5] CLD 23 MLTPL
Deltapilot M FMB51 [4] CLD 23 MLTPL
Deltapilot M FMB52 43 mm x 236 mm CLD 23 MLTPL
Deltapilot M FMB53 43 mm x 236 mm CLD 23 MLTPL
Deltapilot S FMB70 [5] CLD 23 MLTPL
FMR43[7] [8] CLD 23 MLTPL
Micropilot FMR20B[9] 1.5-3in CLD 23 MLTPL
Micropilot FMR30B[9] 1.5-3in CLD 23 MLTPL
Waterpilot FMX 167 22 mm x 220 mm CLD 23 MLTPL
Waterpilot FMX21 22 mm x 259 mm CLD 23 MLTPL

[1] Certified for a minimum flow rate of 10,000 L/day.
[2] Only products bearing the NSF Mark on the product, product packaging, and/or
    documentation shipped with the product are Certified.
[3] All Cerabar models 
    G 1/2" - 2"
    1/2" - 2" NPT 
    Flanges DN25 – DN80 (1" - 4")
[4] Deltapilot M FMB51: 
    G 1 1/2"
    1 1/2" NPT 
    Flanges DN40 – DN100 (2" – 4") 
    Rod length up to 4m
[5] Deltapilot S FMB70 and Deltapilot M FMB50: 
    G 1 1/2"
    1 1/2" NPT 
    Flanges DN40 – DN100 (1 1/2" – 4") 
    Sanitary connections DN40 - DN50 (1 1/2" – 2")
[6] All Deltabar models: 
    1/4" NPT
    1/4" RC
[7] Certified for use in tanks 5 gallons and greater.
    Product certified for PEEK, EPDM, and SS316L materials only.
[8] Thread G 1/2" - 1.5"
    Thread MNPT 1/2" - 1.5"
    Thread M24x1.5
    NEUMO BioControl DN50
[9] Certified for use in tanks 5 gallons and greater.



Facility : Maulburg, Germany

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Switches/Sensors[1]
Deltabar FMD71 [5] CLD 23 MLTPL
Deltabar FMD72 [5] CLD 23 MLTPL
Deltapilot M FMB50 [3] CLD 23 MLTPL
Deltapilot M FMB51 [4] CLD 23 MLTPL
Deltapilot M FMB52 43 mm x 236 mm CLD 23 MLTPL
Deltapilot M FMB53 43 mm x 236 mm CLD 23 MLTPL
Deltapilot S FMB70 [3] CLD 23 MLTPL
FMR43[6] [7] CLD 23 MLTPL
Micropilot FMR20B[8] 1.5" - 3" CLD 23 MLTPL
Micropilot FMR30B[8] 1.5" - 3" CLD 23 MLTPL
Waterpilot FMX 167 22 mm x 220 mm CLD 23 MLTPL
Waterpilot FMX21 22 mm x 259 mm CLD 23 MLTPL

[1] Certified for a minimum flow rate of 10,000 L/day.
[2] All Cerabar models 
    G 1/2" - 2"
    1/2" - 2" NPT 
    Flanges DN25 – DN80 (1" - 4")
    Flange DN25 - DN80 (1" to 3")
    Thread G 1/2" - 2"
    Thread MNPT1/2"-2"
    Thread M20x1.5
    NEUMO BioControl DN25 - DN 80
    Ingeldstutzen
    Aseptoflex
    DIN11851 DN25 - DN80
    DRD Connection
    SMS Connection 1" - 2"
    Varivent F and N
    Tri-Clamp DN18 - DN76.1 (3/4" - 3")
[3] Deltapilot S FMB70 and Deltapilot M FMB50: 
    G 1 1/2" 
    1 1/2" NPT 
    Flanges DN40 – DN100 (1 1/2" – 4") 
    Sanitary connections DN40 - DN50 (1 1/2" - 2")
[4] Deltapilot M FMB51: 
    G 1 1/2"
    1 1/2" NPT 
    Flanges DN40 – DN100 (2" – 4") 
    Rod length up to 4m
[5] All Deltabar models: 
    1/4" NPT
    1/4" RC
[6] Certified for use in tanks 5 gallons and greater.
    Product certified for PEEK, EPDM, and SS316L materials only.
[7] Thread G 1/2" - 1.5"
    Thread MNPT 1/2" - 1.5"
    Thread M24x1.5
    NEUMO BioControl DN50
[8] Certified for use in tanks 5 gallons and greater.

NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
      documentation shipped with the product are Certified.


 
Endress+Hauser SE+Co. KG 
Haupstr. 1
79689 Maulburg 
Germany 
49 7622 28 0


Facility : # 1 Germany

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Switches/Sensors[1] [G]
FMX11 125 mm x 22 mm CLD 23 MLTPL

[1] Trade naming convention: 
    FMX11-CA11XSYY
    X   - Measuring range
    YY - Cable length in m
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



 
Enolgas Bonomi Spa 
Viale Europa, 227
Concesio, BS 25062 
Italy 
+390302184401


Facility : Concesio, Italy

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Valves  [G]
Swift-O-Matic (Swwwxyzz/?) 1/4" - 2" C. HOT MLTPL

[1] S124 - TOPIC Family ball valves
    x - lever options and valves connection: (numbers from 1 to 9)
    y - Type connection: V, D, W, J, P, T, C, I, K, Z
    zz - sizes (in yellow 92-90) ; in blu (13-23)
    92 - 1/4’’ NPT
    93 - 3/8” NPT
    94 - 1/2" NPT
    95 - 3/4” NPT
    96 - 1” NPT
    97 - 1 1/4" NPT
    98 - 1 1/2” NPT
    99 - 2” NPT
    88 - 2 1/2" NPT
    89 - 3” NPT
    90 - 4” NPT
    13 - 1/4’’ PRESS or SOLDER or PEX or COMPRESSION
    14 - 3/8” PRESS or SOLDER or PEX or COMPRESSION
    15 - 1/2" PRESS or SOLDER or PEX or COMPRESSION
    16 - 3/4” PRESS or SOLDER or PEX or COMPRESSION
    17 - 1” PRESS or SOLDER or PEX or COMPRESSION
    18 - 1 1/4" PRESS or SOLDER or PEX or COMPRESSION
    19 - 1 1/2” PRESS or SOLDER or PEX or COMPRESSION
    20 - 2” PRESS or SOLDER or PEX or COMPRESSION
    21 - 2 1/2" PRESS or SOLDER or PEX or COMPRESSION
    22 - 3” PRESS or SOLDER or PEX or COMPRESSION
    23 - 4” PRESS or SOLDER or PEX or COMPRESSION
    w - alphanumeric character. Options:
    L - with lockable lever
    0 – 9 - customization / lever color, packaging or marking
    A – Z - customization / lever color, packaging or marking
[2] Naming convention: Swwwxyzz/?
    www - Family ball valves
    S125 - Topic
    S103 - Switf-O-Matic ISO
    S304 - Swift-O-Matic QM
    x - lever options and valves connection: (numbers from 1 to 9)
    y - Type connection
    V - Threaded
    W - Weld
    J - Press Joint
    P - PEX
    K - PEX-PRESS connection
    Z - PEX-WELD connection
    B - Threaded with plastic lever
    zz - sizes :
        92 - 1/4’’ NPT
        93 - 3/8” NPT
        94 - 1/2" NPT
        95 - 3/4” NPT
        96 - 1” NPT
        97 - 1 1/4" NPT
        98 - 1 1/2” NPT
        99 - 2” NPT
        12 - 1/4’’ PRESS or SOLDER or PEX
        13 - 3/8” PRESS or SOLDER or PEX
        14  - 1/2" PRESS or SOLDER or PEX
        15 - 3/4” PRESS or SOLDER or PEX
        16 - 1” PRESS or SOLDER or PEX
        17 - 1 1/4" PRESS or SOLDER or PEX
        18 - 1 1/2” PRESS or SOLDER or PEX
        19 - 2” PRESS or SOLDER or PEX
        02 - 1/4" ISO228
        03 - 3/8" ISO228
        04 - 1/2" ISO228
        05 - 3/4" ISO228
        06 - 1" ISO228
        07 - 1 1/4" ISO228
        08 - 1 1/2" ISO228
        09 - 2" ISO228
        32 - 1/4" UNI EN 10226
        33 - 3/8" UNI EN 10226
        34 - 1/2" UNI EN 10226
        35 - 3/4" UNI EN 10226
        36 - 1" UNI EN 10226
        37 - 1 1/4" UNI EN 10226
        38 - 1 1/2" UNI EN 10226
        39 - 2" UNI EN 10226
    ? - Options:
        P - With Plastic Lever
        L - With lockable lever
        0 – 9 - customization / lever color, packaging or marking
        A – Z - customization / lever color, packaging or marking
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



 
Enviro Pure, Inc. 
2523 Scheid Road
Huron, OH 44839 
United States 
419-433-0175


Facility : # 1 USA

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Filtration Devices/Components
EGBFE4[1] [2] 5" x 24" CLD 23 MLTPL
EGBFV8[1] [3] 8" x 25" - 35" CLD 23 MLTPL
EGFHD1[1] [4] 4" x 8" - 34" CLD 23 MLTPL
EGMBE[1] [5] 26" - 40" x 72" CLD 23 MLTPL
EGMBV[1] [6] 26" - 40" x 72" CLD 23 MLTPL
EGTCH[1] [7] 8" - 18" x 28" - 40" CLD 23 MLTPL
EGTCHB[1] [8] 8" - 18" x 28" - 40" CLD 23 MLTPL
EPG-Series Filter Cartridges[11] [12] CLD 23 MLTPL
EPP-Series Filter Cartridges[11] [12] CLD 23 MLTPL
EPPE-Series Filter Cartridges[11] [12] CLD 23 MLTPL
Emuniclear- ESW[9] [10] CLD 23 MLTPL
Emuniclear-EMB[9] [10] CLD 23 MLTPL

[1] Certified for point-of-entry (POE) and municipal end uses.
[2] EGBFE4-[basket size]-[port size]-[port
    style]-[outlet]-[material]-[P-rating]-[finish]-[MC]
    [basket size] - 12 (Size #4)
    [port size]   - 1N (1"FNPT)
    [outlet]      - 3 (bottom & opposite side outlet)[material] - 4 (304SS), 6 (316SS)
    [P-rating]    - 30 (300psi)
    [finish]      - GB (glass bead)
    [MC]          - NSF-61 certified
[3] EGBFV8-[basket size]-[port size]-[port
    style]-[outlet]-[material]-[P-rating]-[finish]-[ASME status]-[MC]
    [basket size] - 15 (Size #1), 30 (Size #2), 230 (twin Size #2)
    [port size]   - 1 through 8 (1" through 8")
    [port style]  - N (NPT), F (flange), T (sanitary ferrule)
    [outlet]      - 1 (bottom outlet), 2 (opposite side outlet), 3 (bottom & opposite side 
                    outlet), 5 (same side outlet)
    [material]    - 4 (304SS), 6 (316SS)
    [P-rating]    - 15 (150psi)
    [finish]      - GB (glass bead), EP (electropolished)
    [ASME status] - U (ASME Code), blank (non-code)
    [MC]          - NSF-61 certified
[4] EGFHD1-[length]-[port size]-[adapter type]-[material]-[P-rating]-[MC]
    [length]       - 5, 10, 20, 30 (5", 10", 20", 30")
    [port size]    - 75N (3/4"NPT), 1N (1"NPT), 75B (3/4"BSPP), 1B (1" BSPP)
    [adapter type] - D (DOE), 2 (222), 6 (226)
    [material]     - 4 (304), 6 (316)
    [P-rating]     - 30 (300psi)
    [MC]           - NSF-61 certified
[5] EGMBE-[basket quantity]-[basket size]-[port size &
    style]-[material]-[P-rating]-[finish]-[MC]
    [basket quantity]   - 4, 6, 8, or 12
    [basket size]       - 30 (Size #2)
    [port size & style] - 4, 6, 8, or 10 (4", 6", 8", or 10" flange)
    [material]          - 4 (304SS), 6 (316SS)
    [P-rating]          - 15 (150psi)
    [finish]            - GB (glass bead)
    [MC]                - NSF-61 certified
[6] EGMBV-[basket quantity]-[basket size]-[port size &
    style]-[material]-[P-rating]-[finish]-[ASME status]-[MC]
    [basket quantity]   - 4, 6, 8, or 12
    [basket size]       - 30 (Size #2)
    [port size & style] - 4, 6, 8, or 10 (4", 6", 8", or 10" flange)
    [material]          - 4 (304SS), 6 (316SS)
    [P-rating]          - 15 (150psi)
    [finish]            - GB (glass bead)
    [ASME status]       - U (ASME Code), blank (non-code)
    [MC]                - NSF-61 certified
[7] EGTCH-[qty of cartridges]-[length]-[port
    size]-[outlet]-[material]-[P-rating]-[finish]-[ASME status]-[MC]
    [quantity of cartridges] - 3, 5, 7, 12, 21
    [length]                 - 1 (10"), 2 (20"), 3 (30"), 4 (40"
    [port size]              - 1 through 8 (1" through 8")
    [port style]             - N (NPT), F (flange), T (sanitary ferrule)
    [outlet]                 - 1 (bottom outlet), 2 (opposite outlet)
    [material]               - 4 (304SS), 6 (316SS)
    [P-rating]               - 15 (150psi)
    [finish]                 - GB (glass bead), EP (electropolished)
    [ASME status]            - U (ASME Code), blank (non-code)
    [MC]                     - NSF-61 certified
[8] EGTCHB-[qty of cartridges]-[length]-[port size]-[outlet
    location]-[material]-[P-rating]-[finish]-[MC]
    [quantity of cartridges] - 3, 4, 5, 7, 12, 22
    [length]                 - 1 (10"), 2 (20"), 3 (30"), 4 (40")
    [port size]              - 1 through 8 (1" through 8")
    [port style]             - M (NPT), F (flange), T (sanitary ferrule)
    [outlet location]        - 1 (bottom outlet), 2 (opposite outlet)
    [material]               - 4 (304SS), 6 (316SS)
    [P-rating]               - 15 (150psi)
    [finish]                 - PC (polycoat)
    [MC]                     - NSF-61 certified
[9] Certified for the following part numbers: 
    
    EMuniclear-EMB
    EGWTB[BB][Micron]A[Length][End Cap Code][O-ring][Bond][Core][Suffix]
    EGCTB[Micron]A[Length][End Cap Code][O-ring][Bond][Core]
    EGATB[Micron]A[Length][End Cap Code][O-ring][Bond][Core]
    [BB]   - Blank (2.5" OD), BB (4" OD)
    [Bond] - Blank (adhesive bond), TB (thermally bonded)
    [Core] - Blank (no core), PC (polypropylene core)
    [Suffix] - Blank (standard), MC (MC trade name)
    
    Emuniclear-ESW
    EGP[Micron]A[Length]P[End Caps][O-ring]-MC
     
    [Micron]  - 1, 3, 5, 10, 25, 50 
    [Length]  - 9.75" - 60" 
    [End Cap] - Blank (None; DOE, No gaskets), 3 (222 w/fin), 4 (222 w/flat cap), 5 (222
                w/spring), 6 (226 w/flat cap), 7 (226 w/fin), 8 (226 w/spring), 9 (SOE
                w/spring), 10 (DOE w/PP Core extender), 13 (SOE w/ PP Core Ext/Spring) 
    [O-ring]  - B (Buna N), E (EPDM), S (Silicone), Blank (None)
[10] Certified for a minimum daily flow of 4,320 gallons per 10" equivalent.
[11] Certified for the following part numbers:
     
     [Series][Micron][Efficiency][Length]C[End Cap Code][O-ring]
     [Series] - EPP (2.7"OD); EPPE (2.5"OD); EPG (2.7"OD with reduced area) 
     [Micron] - 0.1 to 40
     [Efficiency] - A (absolute), N (nominal)
     [Length]  - 9.75" to 40"
     [Options] - I (stainless steel inserts), SS (stainless steel core), R (18 mega-ohm 
                 rinse), CS (stainless steel spring)
     [End Cap] - 2 (DOE with gaskets), 3 (222 w/fin), 4 (222 w/flat cap), 5 (222 w/spring), 6
     
                 (226 w/flat cap), 7 (226 w/fin), 8 (226 w/spring), 16 (213 with flat cap), 
                 28 (222 with tabs)
     [O-ring] - B (Buna N), E (EPDM), S (silicone)
[12] Certified for a minimum daily flow of 600 gallons per day.  Certified for use in
     municipal water treatment facilities only.

Microfiltration Devices
EEHF3-Series Filter Cartridges[13] [14] CLD 23 MLTPL
EHF-Series Filter Cartridges[13] [14] CLD 23 MLTPL
EHF3-Series Filter Cartridges[13] [14] CLD 23 MLTPL
EHFB-Series Filter Cartridges[15] [16] CLD 23 MLTPL

[13] Model number format:
     [series] [media] [micron rating] [efficiency] [length] [top type] [hardward] [oring]
     [series] - "EHF", "EHF3", "EEHF3"
     [media] - PP (polypropylene)
     [micron rating] - 0.2 to 100um
     [efficiency] - A (absolute), N (nominal)
     [length] - 10" to 60", "1" (size #1), "2" (size #2)
     [top type] - none, or "A", "B", "C", "D", "E", or "S"
     [hardware] - none, or "P" (polypropylene)
     [Oring] - B (buna), E (EPDM), S (silicone)
     Certified for a minimum daily flow of 2,000 gallons
[14] EHF-Series Filter Cartridges- Diameter: 6" Length : 20" to 80"
     EEHF3-Series Filter Cartridges- Diameter: 6" Length :20" to 60"
     EHF3-Series Filter Cartridges- Diameter: 6" Length : 20" to 60"
[15] Model number format:
     [series] [media] [micron rating] [efficiency] [length] [top type] [hardward] [oring]	
     [series] - "EHFB"
     [media] - PP (polypropylene)		
     [micron rating] - 0.2 to 100um		
     [efficiency] - A (absolute), N (nominal)	
     [length] - 10" to 60", "1" (size #1), "2" (size #2)	
     [top type] - none, or "A", "B", "C", "D", "E", or "S"	
     [hardware] - none, or "P" (polypropylene)		
     [Oring] - B (buna), E (EPDM), S (silicone)	
     Certified for a minimum daily flow of 2,000 gallons
[16] EHFB-Series Filter Cartridges - Diameter:6" Length: 12" to 24".

NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
      documentation shipped with the product are certified. 


 
Environmental World Products (China) Inc 
No.3, Lane 1015, South Boxue Road, Malu Town, Jiading District
Shanghai,  
China 
021-59153059


Facility : # 1 China

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Reverse Osmosis Element[1] [G]
FR-4040 4" x 40" CLD 23 MLTPL
FR-8040 8" x 40" CLD 23 MLTPL
PAN-ULP4040HF 4" x 40" CLD 23 MLTPL
PAN-ULP8040HF 8" x 40" CLD 23 MLTPL
PAN-ULP8040SHF 8" x 40" CLD 23 MLTPL

[1] ECO-4040 and ULP-4040 require a pre-service flush at 1.875 gallons per minute (gpm) for
    6 hours using tap water.
            ECO-8040, PAN-ULP8040HF and PAN-BW8040HR require a pre-service flush at 8.33
    gallons per minute (gpm) for 6 hours using tap water.
            PAN-ULP8040HR and FR-8040 require a pre-service flush at 7.29 gallons per minute
    (gpm) for 6 hours using tap water.
            BW-4040 and FR-4040 require a pre-service flush at 1.67 gallons per minute (gpm)
    for 6 hours using tap water.
            PAN-ULP8040SHF requires a pre-service flush at 9.71 gallons per minute (gpm) for
    6 hours using tap water.
            PAN-ULP4040HR requires a pre-service flush at 1.53 gallons per minute (gpm) for
    6 hours using tap water.
            PAN-ULP4040HF requires a pre-service flush at 2.153 gallons per minute (gpm) for
    6 hours using tap water.
            PAN-ULP4040HR is certified for a minimum daily flow of 2200 gallons per day for
    use in public water treatment facilities.
            BW-4040 and FR-4040 are certified for a minimum daily flow of 2400 gallons per
    day for use in public water treatment facilities.
            ECO-4040 and ULP-4040 are certified for a minimum daily flow of 2700 gallons per
    day for use in public water treatment facilities.
            PAN-ULP4040HF is certified for a minimum daily flow of 3100 gallons per day for
    use in public water treatment facilities.
            PAN-ULP8040HR and FR-8040 are certified for a minimum daily flow of 10500
    gallons per day for use in public water treatment facilities.
            ECO-8040, PAN-ULP8040HF and PAN-BW8040HR are certified for a minimum daily flow
    of 12000 gallons per day for use in public water treatment facilities.
            PAN-ULP8040SHF is certified for a minimum daily flow of 14000 gallons per day
    for use in public water treatment facilities."							
    
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



 
Euromag International SRL 
Via Balla, 55
Villafranca Padovana 
Padova 35010 
Italy 
39 04 990 05064
Visit this company's website


Facility : Padova, Italy

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Water Meters[G]
MUT1000US Wafer flowmeter (full bore) 25 mm - 300 mm D. HOT MLTPL
MUT2200US flanged flowmeter (full bore) 15 mm - 2000 mm D. HOT MLTPL
MUT2300US flanged flowmeter (reduced bore) 50 mm - 300 mm D. HOT MLTPL

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



 
EuroTec Water Pte Ltd. 
57 Ubi Ave 1
#07-11 Ubi Centre 
Singapore 408936 
Singapore 
65 6721 9708
Visit this company's website


Facility : # 1 China

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Ultrafiltration Devices
ETUF-0440[1] [2] 9 cm x 112 cm CLD 23 MLTPL
ETUF-8055S[3] [4] 16 cm x 177.5 cm CLD 23 MLTPL
ETUF-9040R[5] [6] 22.5 cm x 173cm CLD 23 MLTPL
ETUF-9060F[5] [6] 22.5 cm x 186 cm CLD 23 MLTPL
ETUF-9060R[7] [8] 22.5 cm x 223 cm CLD 23 MLTPL
ETUF-9076D[7] [8] 22.5 cm x 236 cm CLD 23 MLTPL

[1] Certified for minimum flow rate of 6,144 liters per day.
[2] Must be flushed with tap water at 8 liters per minute for 1 hour.
[3] Certified for minimum flow rate of 29,040 liters per day.
[4] Must be flushed with tap water at 33 liters per minute for 1 hour.
[5] Certified for minimum flow rate of 40,480 liters per day.
[6] Must be flushed with tap water at 50 liters per minute for 1 hour.
[7] Certified for minimum flow rate of 58,960 liters per day.
[8] Must be flushed with tap water at 75 liters per minute for 1 hour.



 
EUROTROL S.P.A. 
Via Valparaiso 1
20144 Milano 
Italy 
39 02 33545834
Visit this company's website


Facility : # 3 China

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Reverse Osmosis Element[1] [2] [3]
MMBW8040FR 8" x 40" CLD 23 MLTPL
MMBW8040XLFR 8" x 40" CLD 23 MLTPL
MMES8040UFR 8" x 40" CLD 23 MLTPL
MMULP8040HF 8" x 40" CLD 23 MLTPL
MMXLP8040HF 8" x 40" CLD 23 MLTPL

[1] Size is expressed as Diameter x length.
[2] MMBW8040 and MMULP8040 models are Certified for a minimum daily flow of 10000 gallons.
    MMBW4040 model is Certified for a minimum daily flow of 2400 gallons.
    MMULP4040 model is Certified for a minimum daily flow of 2600 gallons.
    MMULP4040MR model is Certified for a minimum daily flow of 2200 gallons.
    MMULP4040HR,MMSW4040MR models are Certified for a minimum daily flow of 1800 gallons.
    MMULP4021 model is Certified for a minimum daily flow of 950 gallons.
    MMSW2521 model is Certified for a minimum daily flow of 250 gallons.
    MMSW2540 model is Certified for a minimum daily flow of 500 gallons.
    MMSW4021 model is Certified for a minimum daily flow of 700 gallons.
    MMSW8040MR model is Certified for a minimum daily flow of 7500 gallons.
    MMBW8040HR, MMBW8040-2 models are Certified for a minimum daily flow of 10500 gallons.
    MMULP2540, MMXLP2540 models are Certified for a minimum daily flow of 750 gallons.
    MMULP8040HF model is Certified for a minimum daily flow of 12,500 gallons.
    MMBW8040FR model is Certified for a minimum daily flow of 9,500 gallons.
    MMSW8040HR model is Certified for a minimum daily flow of 6,500 gallons.
    MMSW4040HR model is Certified for a minimum daily flow of 1,500 gallons.
    MMXLP8040 model is Certified for a minimum daily flow of 2,900 gallons.
    MMXLP4040 model is Certified for a minimum daily flow of 2,600 gallons.
    MMXLP2521 model is Certified for a minimum daily flow of 400 gallons.
[3] All models 2.5” in diameter require a 2 gpm flush for 24 hours using tap water.
    All models 4” in diameter require a 4 gpm flush for 24 hours using tap water. 
    All models 8” in diameter require a 15 gpm flush for 24 hours using tap water.



 
Everflow Supplies Inc. 
100 Middlesex Avenue
Carteret, NJ 07008 
United States 
908-436-1100


Facility : Foshan, China

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Fittings[G]
Everflow PF6 1/2" - 2" C. HOT BRASS

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

Valves[G]
Everflow Low Lead PEX Ball Valve 1/2" - 1 1/4" C. HOT MLTPL
Everflow PEX Ball Valve (PF5-Q) 1/2" - 1 1/4" C. HOT MLTPL

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



 
Evoqua Water Technologies 
210 Sixth Avenue
Pittsburgh, PA 15222 
United States 
866-926-8420 
856-507-9000
Visit this company's website


Facility : Günzburg, Germany

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Chemical Generators[1]
OSEC B-pak electrolyzer 8-pass 260 ppd 1 of 2 / W3T342935[2] [3] N/A D. HOT MLTPL
OSEC B-pak electrolyzer 8-pass 500 ppd 1 of 1 / W3T192937[2] [3] N/A D. HOT MLTPL
OSEC B-pak electrolyzer 8-pass 500 ppd 1 of 2 / W3T192938[2] [3] N/A D. HOT MLTPL
OSEC B-pak electrolyzer 8-pass 500 ppd 1 of 3 / W3T192940[2] [3] N/A D. HOT MLTPL
OSEC B-pak electrolyzer 8-pass 500 ppd 2 of 2 / W3T192939[2] [3] N/A D. HOT MLTPL
OSEC B-pak electrolyzer 8-pass 500 ppd 2 of 3 / W3T193231[2] [3] N/A D. HOT MLTPL

[1] Evaluation of this product is performed to the health effects requirements of
    NSF/ANSI/CAN 61, which assesses the acceptability of potential extractants from the
    electrolyzer. No evaluation has been performed on the strength or efficacy of the
    chemical(s) generated. As unit operation, maintenance and the consistency of source
    ingredients may affect the performance of the unit, the ensuing chemical(s) is not
    certified by NSF to NSF/ANSI/CAN 60.
    
    Certified for a 0.85% sodium hypochlorite solution with a dosage rate yielding a maximum
    chlorine concentration of 10 mg/L into potable water.
[2] Certified for the electrolyzer only. Certification does not include any other generator
    components.
[3] Certified for a 0.85% sodium hypochlorite solution with a dosage rate yielding a maximum
    chlorine concentration of 10 mg/L into potable water.
[4] Certified for a sodium hypochlorite solution with a dosage rate yielding a maximum
    chlorine concentration of 8000 ppm into potable water.



 
Evoqua Water Technologies Ltd. 
Unit 9, Norman Way, Severn
Bridge Industrial Estate, Portskewett 
Caldicot NP26 5YN 
United Kingdom 
44 194 221 6161


Facility : Strzelin, Poland

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Ultra-Violet Reactors
WF-115-3-N[3] 3" D. HOT MLTPL
WF-115-4-N[3] 4" D. HOT MLTPL
WF-125-6-N[3] 6" D. HOT MLTPL
WF-215-6-N[3] 6" D. HOT MLTPL
WF-215-8-N[3] 8" D. HOT MLTPL
WF-225-8-N[3] 8" D. HOT MLTPL
WF-230-10-N[3] 10" D. HOT MLTPL
WF-430-12-N[3] 12" D. HOT MLTPL
WF-640-16[3] 16" D. HOT MLTPL
WF-850-20[3] 20" D. HOT MLTPL
WF-1060-24[3] 24" D. HOT MLTPL
WF-1280-32[3] 32" D. HOT MLTPL

[1] Certified for a minimum daily flow of 60,000 liters.
[2] Certified for a minimum daily flow of 30,000 liters.
[3] Certified for a minimum daily flow of 18,000 liters.



FEBCO, a Watts Regulator Co. Division 
815 Chestnut Street
North Andover, MA 01845 
United States 
800-767-1234 


Facility : Woodland, CA

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Backflow Preventers [G]
750-X-YY-ZZ-TT[1] 2 1/2" - 10" CLD 23 MLTPL
760-X-YY-ZZ-TT[1] 2 1/2" - 10" CLD 23 MLTPL
LF800[2] 4" - 10" C. HOT MLTPL
LF800LA[2] 4" - 10" C. HOT MLTPL

[1] X - Valve pattern 
        Blank - Straight 
        N - N pattern 
        Z - Z pattern 
    YY - Backflow shutoff designation: where 2 per units may be mixed like NRS x PIV 
         DNRS - Domestic Non-Rising Stem Gate 
         DPIV - Domestic Post Indicator Gate 
         DOSY - Domestic Outside Stem and Yoke Gate 
         BFG  - Butterfly 
    ZZ - Inlet and outlet connections 
         Blank - Flange by flange 
         FxG   -  Flange by groove 
         GxF   - Groove by flange 
         GxG   - Groove by groove 
    TT - Strainer options 
         Blank - No strainer 
         S - Strainer 77F-DI-FDA-125
[2] Bypass Valve Options:
    GPM - 3/4" Bypass with GPM Meter
    CFM - 3/4" Bypass with CFM Meter
    LM  - 3/4" Bypass Less CFM Meter
    LF800LA models are not sold with the GPM or CFM meters.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



FEBCO, a Watts Water Technologies Co. 
815 Chestnut Street
North Andover, MA 01845 
United States 
800-767-1234 


Facility : # 1 USA

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Backflow Preventers [G]
F880-WZ(1)(2)[2] 4" - 10" CLD 23 MLTPL
LF800[1] 4" - 10" C. HOT MLTPL
LF800LA[1] 4" - 10" C. HOT MLTPL
LF850(1)(2)[2] 2 1/2" - 10" CLD 23 MLTPL
LF860(1)(2)[2] 2 1/2" - 10" CLD 23 MLTPL
LF870-W(1)(2)[2] 4" - 10" CLD 23 MLTPL
LF870-WZ(1)(2)[2] 4" - 10" CLD 23 MLTPL
LF870V(1)(2)[2] 2 1/2" – 10" CLD 23 MLTPL
LF880-W(1)(2)[2] 4" - 10" CLD 23 MLTPL
LF880V(1)(2)[2] 2 1/2" – 10" CLD 23 MLTPL

[1] Bypass Valve Options:
    GPM - 3/4" Bypass with GPM Meter
    CFM - 3/4" Bypass with CFM Meter
    LM  - 3/4" Bypass Less CFM Meter
    LF800LA models are not sold with the GPM or CFM meters.
[2] Suffixes may consist of:
    (1) Isolation Shut-off Valve Options: 
        LG   - Assembly ships without isolation shut-off valves 
        NRS  - Non-rising stem 
        DNRS - Domestic non-rising stem 
        OSY  - Outside stem and yoke 
        DOSY - Domestic outside stem & yoke 
    (2) Installation Option: 
        LH - Test cocks mounted for right-to-left flow installation
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

Water Meters[G]
LF406-CFM-RH-LA 2" CLD 23 MLTPL
LF406-GPM-RH-LA 2" CLD 23 MLTPL
LF406-LM-RH-LA 2" CLD 23 MLTPL

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



Facility : Ningbo, China

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Valves [G]
LF622 FT [2] 1/2" - 2" CLD 23 MLTPL
LF 622 UF[2] 1/2" - 2" CLD 23 MLTPL
LF622 UFT[2] 1/2" - 2" CLD 23 MLTPL
LF 622 F[2] 1/2" - 2" CLD 23 MLTPL

[2] FT is with test port.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

Backflow Preventers[1] [G]
LF860U 1/2" - 2" CLD 23 MLTPL
LF860 1/2" - 2" CLD 23 MLTPL
LF850 1/2" - 2" CLD 23 MLTPL
LF850U 1/2" - 2" CLD 23 MLTPL

[1] Product may have box stickers or temporary tags with the following configuration
    descriptions:
    LF850 / LF850U: 
    QT - Quarter Turn Ball Valve 
    DC - Double Check Assembly 
    LF860 / LF860U: 
    QT  - Quarter Turn Ball Valve 
    RP  - Reduced Pressure Assembly 
    RPZ - Reduced Pressure Zone
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

Strainer[G]
LF650A 3/8" - 3" CLD 23 MLTPL

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



 
Ferguson Enterprises LLC 
12500 Jefferson Avenue
Newport News, VA 23602 
United States 
757-874-7795


Facility : Changshu, Jiangsu, China

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Pressure Gauges
FNWXLFG0100L 1/4" CLD 23 MLTPL
FNWXLFG0160L 1/4" CLD 23 MLTPL
FNWXLFG0200L 1/4" CLD 23 MLTPL
FNWXLFG0300L 1/4" CLD 23 MLTPL
FNWXLFG030L 1/4" CLD 23 MLTPL
FNWXLFG060L 1/4" CLD 23 MLTPL



Facility : Taicang, Jiangsu, China

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Pressure Gauges
FNWXG0100R 1/4" CLD 23 MLTPL
FNWXG0160R 1/4" CLD 23 MLTPL
FNWXG0200R 1/4" CLD 23 MLTPL
FNWXG0300R 1/4" CLD 23 MLTPL
FNWXG030R 1/4" CLD 23 MLTPL
FNWXG060R 1/4" CLD 23 MLTPL



 
Ferguson Enterprises LLC 
12500 Jefferson Avenue
Newport News, VA 23602 
United States 
888-222-1785
Visit this company's website


Facility : Kaohsiung, Taiwan

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Valves[G]
FNW340NAED PVC True Union Ball Valve 1/2'' CLD 23 MLTPL
FNW340NAEF PVC True Union Ball Valve 3/4'' CLD 23 MLTPL
FNW340NAEG PVC True Union Ball Valve 1'' CLD 23 MLTPL
FNW340NAEH PVC True Union Ball Valve 1 1/4'' CLD 23 MLTPL
FNW340NAEJ PVC True Union Ball Valve 1 1/2'' CLD 23 MLTPL
FNW340NAEK PVC True Union Ball Valve 2'' CLD 23 MLTPL
FNW340NAEL PVC True Union Ball Valve 2 1/2'' CLD 23 MLTPL
FNW340NAEM PVC True Union Ball Valve 3'' CLD 23 MLTPL
FNW340NAEP PVC True Union Ball Valve 4'' CLD 23 MLTPL
FNW340NAFED PVC True Union Ball Valve 1/2'' CLD 23 MLTPL
FNW340NAFEF PVC True Union Ball Valve 3/4'' CLD 23 MLTPL
FNW340NAFEG PVC True Union Ball Valve 1'' CLD 23 MLTPL
FNW340NAFEH PVC True Union Ball Valve 1 1/4'' CLD 23 MLTPL
FNW340NAFEJ PVC True Union Ball Valve 1 1/2'' CLD 23 MLTPL
FNW340NAFEK PVC True Union Ball Valve 2'' CLD 23 MLTPL
FNW340NAFEL PVC True Union Ball Valve 2 1/2'' CLD 23 MLTPL
FNW340NAFEM PVC True Union Ball Valve 3'' CLD 23 MLTPL
FNW340NAFEP PVC True Union Ball Valve 4'' CLD 23 MLTPL
FNW340NAFVD PVC True Union Ball Valve 1/2'' CLD 23 MLTPL
FNW340NAFVF PVC True Union Ball Valve 3/4'' CLD 23 MLTPL
FNW340NAFVG PVC True Union Ball Valve 1'' CLD 23 MLTPL
FNW340NAFVH PVC True Union Ball Valve 1 1/4'' CLD 23 MLTPL
FNW340NAFVJ PVC True Union Ball Valve 1 1/2'' CLD 23 MLTPL
FNW340NAFVK PVC True Union Ball Valve 2'' CLD 23 MLTPL
FNW340NAFVL PVC True Union Ball Valve 2 1/2'' CLD 23 MLTPL
FNW340NAFVM PVC True Union Ball Valve 3'' CLD 23 MLTPL
FNW340NAFVP PVC True Union Ball Valve 4'' CLD 23 MLTPL
FNW340NAVD PVC True Union Ball Valve 1/2'' CLD 23 MLTPL
FNW340NAVF PVC True Union Ball Valve 3/4'' CLD 23 MLTPL
FNW340NAVG PVC True Union Ball Valve 1'' CLD 23 MLTPL
FNW340NAVH PVC True Union Ball Valve 1 1/4'' CLD 23 MLTPL
FNW340NAVJ PVC True Union Ball Valve 1 1/2'' CLD 23 MLTPL
FNW340NAVK PVC True Union Ball Valve 2'' CLD 23 MLTPL
FNW340NAVL PVC True Union Ball Valve 2 1/2'' CLD 23 MLTPL
FNW340NAVM PVC True Union Ball Valve 3'' CLD 23 MLTPL
FNW340NAVP PVC True Union Ball Valve 4'' CLD 23 MLTPL
FNW350NAED CPVC True Union Ball Valve 1/2'' C. HOT CPVC
FNW350NAEF CPVC True Union Ball Valve 3/4'' C. HOT CPVC
FNW350NAEG CPVC True Union Ball Valve 1'' C. HOT CPVC
FNW350NAEH CPVC True Union Ball Valve 1 1/4'' C. HOT CPVC
FNW350NAEJ CPVC True Union Ball Valve 1 1/2'' C. HOT CPVC
FNW350NAEK CPVC True Union Ball Valve 2'' C. HOT CPVC
FNW350NAEL CPVC True Union Ball Valve 2 1/2'' C. HOT CPVC
FNW350NAEM CPVC True Union Ball Valve 3'' C. HOT CPVC
FNW350NAEP CPVC True Union Ball Valve 4'' C. HOT CPVC
FNW350NAVD CPVC True Union Ball Valve 1/2'' C. HOT CPVC
FNW350NAVF CPVC True Union Ball Valve 3/4'' C. HOT CPVC
FNW350NAVG CPVC True Union Ball Valve 1" C. HOT CPVC
FNW350NAVH CPVC True Union Ball Valve 1 1/4'' C. HOT CPVC
FNW350NAVJ CPVC True Union Ball Valve 1 1/2'' C. HOT CPVC
FNW350NAVK CPVC True Union Ball Valve 2'' C. HOT CPVC
FNW350NAVL CPVC True Union Ball Valve 2 1/2'' C. HOT CPVC
FNW350NAVM CPVC True Union Ball Valve 3'' C. HOT CPVC
FNW350NAVP CPVC True Union Ball Valve 4'' C. HOT CPVC
PFCBVND CPVC CTS Ball Valve 1/2'' C. HOT MLTPL
PFCBVNF CPVC CTS Ball Valve 3/4'' C. HOT MLTPL
PFCBVNG CPVC CTS Ball Valve 1'' C. HOT MLTPL
PFCBVNH CPVC CTS Ball Valve 1 1/4'' C. HOT MLTPL
PFCBVNJ CPVC CTS Ball Valve 1 1/2'' C. HOT MLTPL
PFCBVNK CPVC CTS Ball Valve 2'' C. HOT MLTPL
PFPSBVND PVC Compact Ball Valve 1/2'' CLD 23 MLTPL
PFPSBVNF PVC Compact Ball Valve 3/4'' CLD 23 MLTPL
PFPSBVNG PVC Compact Ball Valve 1'' CLD 23 MLTPL
PFPSBVNH PVC Compact Ball Valve 1 1/4'' CLD 23 MLTPL
PFPSBVNJ PVC Compact Ball Valve 1 1/2'' CLD 23 MLTPL
PFPSBVNK PVC Compact Ball Valve 2'' CLD 23 MLTPL
PFPSBVNL PVC Compact Ball Valve 2 1/2'' CLD 23 MLTPL
PFPSBVNM PVC Compact Ball Valve 3'' CLD 23 MLTPL
PFPSBVNP PVC Compact Ball Valve 4'' CLD 23 MLTPL
PFPTBVND PVC Compact Ball Valve 1/2'' CLD 23 MLTPL
PFPTBVNF PVC Compact Ball Valve 3/4'' CLD 23 MLTPL
PFPTBVNG PVC Compact Ball Valve 1'' CLD 23 MLTPL
PFPTBVNH PVC Compact Ball Valve 1 1/4'' CLD 23 MLTPL
PFPTBVNJ PVC Compact Ball Valve 1 1/2'' CLD 23 MLTPL
PFPTBVNK PVC Compact Ball Valve 2'' CLD 23 MLTPL
PFPTBVNL PVC Compact Ball Valve 2 1/2'' CLD 23 MLTPL
PFPTBVNM PVC Compact Ball Valve 3'' CLD 23 MLTPL
PFPTBVNP PVC Compact Ball Valve 4'' CLD 23 MLTPL

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



 
Ferguson Enterprises LLC 
751 Lakefront Commons
Newport News, VA 23602 
United States 
346-666-2251


Facility : M1001

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Thermal Expansion Tanks
PFXT12 4.4 gal. D. HOT MLTPL
PFXT5 2 gal. D. HOT MLTPL



 
Ferguson Enterprises LLC 
751 Lakefront Commons
Newport News, VA 23606 
United States 
1-800-721-2590
Visit this company's website


Facility : Coimbatore, India

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Tapping Tee[G]
FIP Mechanical Outlet Tee, Galvanized, F21 2-8 in C. HOT MLTPL
FIP Mechanical Outlet Tee, Painted, F21 2-8 in C. HOT MLTPL
Grooved Mechanical Outlet Tee, Painted, F20 2-8 in C. HOT MLTPL

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



 
Ferguson Enterprises, Inc. 
12500 Jefferson Avenue
Newport News, VA 23609 
United States 
757-874-7795
Visit this company's website


Facility : # 1 Republic of Korea

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Valves[G]
FNW711E 2" - 24" CLD 23 MLTPL
FNW712E 2" - 24" CLD 23 MLTPL
FNW731E 2" - 24" CLD 23 MLTPL
FNW732E 2" - 24" CLD 23 MLTPL
FNW812E 2" - 24" CLD 23 MLTPL
FNW832E 2" - 24" CLD 23 MLTPL

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



 
FERGUSON ENTERPRISES, LLC 
12500 Jefferson Avenue
Newport News, VA 23602 
United States 
757-969-4992
Visit this company's website


Facility : Shandong, China

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Valves[G]
FNW751L 2.5" CLD 23 MLTPL
FNW751M 3" CLD 23 MLTPL
FNW751P 4" CLD 23 MLTPL
FNW751U 6" CLD 23 MLTPL
FNW751X 8" CLD 23 MLTPL
FNW75110 10" CLD 23 MLTPL
FNW75112 12" CLD 23 MLTPL

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



 
Fibergrate Composite Structures, Inc. 
5151 Beltline Road
Suite 700 
Dallas, TX 75254-7028 
United States 
254-977-1334
Visit this company's website


Facility : Stephenville, TX

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Miscellaneous Process Devices/Components
Dynaform® Fiberglass Structural Shapes [1] CLD 23 MLTPL
Dynarail® FRP Handrail and Ladder Systems [1] CLD 23 MLTPL
Fibergrate® IFR Molded Grating [1] CLD 23 MLTPL
Fibergrate® VEFG Molded Grating [1] CLD 23 MLTPL

[1] All sizes.  Certified for an intended end use in water treatment facilities.



 
Fibro Plastichem (India) Pvt. Ltd. 
CD-82, Sector - 1, Salt Lake
Kolkota, West Bengal 
700064 
Kolkata, WB 700064 
India 
91 974 8297041
Visit this company's website


Facility : Kolkota, West Bengal, India

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Pressurized Water Storage Tanks
Fibroglas® FRP Vessel 10 - 3790 L CLD 23 MLTPL
Fibroglas® PE Vessel 34 - 1000 L CLD 23 MLTPL



 
Fil-Trek Corporation 
55 Stafford Court
Cambridge, ON N1T 2B1 
Canada 
800-623-7448 
519-623-7448
Visit this company's website


Facility : Cambridge, Ontario, Canada

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Filtration Devices/Components
Cartridge Filter Housing GL Series [AA] GL [NN]-[OO]-[L]-[DD] F-[P]-[EEE]-[Q] [1] CLD 23 MLTPL
Cartridge Filter Housing GLH Series [AA] GLH [NN]-[OO]-[L]-[DD] F-[P]-[EEE]-[Q] [1] CLD 23 MLTPL
Cartridge Filter Housing HF Series [AA] HF [NN]-[OO]-[FF]-[DD] F-[P]-[EEE]-[Q] [1] CLD 23 MLTPL
Cartridge Filter Housing HFH Series [AA] HFH [NN]-[OO]-[FF]-[DD] F-[P]-[EEE]-[Q] [1] CLD 23 MLTPL
Cartridge Filter Housing HPI Series [AA] HPI [NN]-[OO]-[L]-[DD] F-[P]-[EEE]-[Q] [1] CLD 23 MLTPL
Cartridge Filter Housing MP Series [GG] MP [HH]-[L]-[DD] F-[P]-[EEE]-[Q] [1] CLD 23 MLTPL
Cartridge Filter Housing MPH Series [GG] MPH [HH]-[L]-[DD] F-[P]-[EEE]-[Q] [1] CLD 23 MLTPL
Cartridge Filter Housing MX Series [AA] MX [NN]-[OO]-[DD] F-[P]-[EEE]-[Q] [1] CLD 23 MLTPL
Cartridge Filter Housing UF Series [AA] UF [NN]-[OO]-[FF]-[DD] F-[P]-[EEE]-[Q] [1] CLD 23 MLTPL
Cartridge Filter Housing UFH Series[AA] UFH [NN]-[OO]-[FF]-[DD] F-[P]-[EEE]-[Q] [1] CLD 23 MLTPL
Multi Bag Filter Housing BMB Series [AA]BMB[NN]-[B][CC]-[DD]F-[EEE]-[Q] [2] CLD 23 MLTPL
Multi Bag Filter Housing LP Series [AA] LP[NN]-[B][CC]-[DD] F-[P]-[EEE]-[Q] [2] CLD 23 MLTPL
Single Bag Filter Housing SL Series [AA] SL [B][CC]-[DD] F-[P]-[EEE] [3] CLD 23 MLTPL
Strainer Housing 90 Series [AA] 9 [J][K][NN]-[DD F-PT[MM]-[Q] [4] CLD 23 MLTPL
Strainer Housing 98 Series [AA]98-[DD]F-[PPP]-[DD}-PT[MM]-L[R] [4] CLD 23 MLTPL

[1] Cartridge Filter Housings are certified for a minimum daily flow of 86,400 gallons per
    day.
    
    [AA]  MOC
          SS304 (S4), SS316(S6)
    
    [GG]  MOC
          SS304 (L4), SS316(L6)
    
    [NN]  BODY DIAMETER 
          Available range from 04 to 60 
    
    [OO]  QUANTITY OF FILTERS
          Available range from 1 to 400
    
    [HH]  QUANTITY OF FILTERS
          Available range from 12 to 245)
    
    [L]   FILTER LENGTH 
          10" (1), 20" (2), 30" (3), 40" (4), 50" (5)
    
    [FF]  FILTER LENGTH 
          20" (20), 40" (40), 60" (60), 80" (80)
    
    [DD]  INLET & OUTLET SIZE
          Available range from 2 to 20
    
    [P]   INLET CONFIGURATION STYLE (IF MODEL STANDARD, THIS MAY BE BLANK)
          Side in/side out (A), Inline (B), Side In Bottom Out (C), Same Side in/out (D), 
          Dual Side in/bottom out and same side in/out (CD), Top in/end out (E) 
    
    [EEE] DESIGN PRESSURE 
          150 PSI (150), 300 PSI (300), CUSTOM PRESSURE (###)
    
    [Q]   OPTIONAL NON-MATERIAL VESSEL MOFICATIONS (MAY NOT BE NOTED) 
          Standard mechanical davit (K1), Hinge (K2), Hydraulic jack davit side (K3), 
          Hydraulic jack davit top (K4), Pogo (K5), Hinge with spring assist (K6), 
          Hydraulic clam style (K7), Hydraulic top mount with side pump (K8), Hydraulic 
          jack davit side with bearings (K9)
    
[2] Multi Bag Filter Housings are certified for a minimum daily flow of 360,000 gallons per
    day.
    
    [AA]  MOC 
          SS304 (S4), SS316(S6)
    
    [NN]  BODY DIAMETER
          Available range from 04 to 60 [B] QUANTITY OF BAG FILTERS Available range from 1
    to 40  
    
    [CC]  BAG FILTER LENGTH  
          SIZE 1 (11), SIZE 2 (12)
     
    [DD]  INLET & OUTLET SIZE 
          Available range from 2 to 20
    
    [P]   INLET CONFIGURATION STYLE (IF MODEL STANDARD, THIS MAY BE BLANK)   
          Side in/side out (A), Inline (B), Side In Bottom Out (C), Same Side in/out (D), 
          Dual Side in/bottom out and same side in/out (CD), Top in/end out (E) 
     
    [EEE] DESIGN PRESSURE 
          150 PSI (150), 300 PSI (300), CUSTOM PRESSURE (###) 
    
    [Q]   OPTIONAL NON-MATERIAL VESSEL MOFICATIONS (MAY NOT BE NOTED) 
          Standard mechanical davit (K1), Hinge (K2), Hydraulic jack davit side (K3), 
          Hydraulic jack davit top (K4), Pogo (K5), Hinge with spring assist (K6), 
          Hydraulic clam style (K7), Hydraulic top mount with side pump (K8), Hydraulic 
          jack davit side with bearings (K9)
    
[3] Single Bag Filter housings are certified for a minimum daily flow of 360,000 gallons per
    day.
    
    [AA]  MOC
          SS304 (S4), SS316(S6) 
    
    [B]   QUANTITY OF BAG FILTERS 
          Available range from 1 to 40 [CC] BAG FILTER LENGTH SIZE 1 (11), SIZE 2 (12)
    
    [DD]  INLET & OUTLET SIZE 
          Available range from 2 to 20 
    
    [P]   INLET CONFIGURATION STYLE (IF MODEL STANDARD, THIS MAY BE BLANK) 
          Side in/side out (A), Inline (B), Side In Bottom Out (C), Same Side in/out (D), 
          Dual Side in/bottom out and same side in/out (CD), Top in/end out (E)  
    
    [EEE] Design pressure
          150 PSI (150), 300 PSI (300), CUSTOM PRESSURE (###)
    
    [Q]   OPTIONAL NON-MATERIAL VESSEL MOFICATIONS (MAY NOT BE NOTED)
          Standard mechanical davit (K1), Hinge (K2), Hydraulic jack davit side (K3), 
          Hydraulic jack davit top (K4), Pogo (K5), Hinge with spring assist (K6), Hydraulic
    
          clam style (K7), Hydraulic top mount with side pump (K8), Hydraulic jack davit
    side 
          with bearings (K9)
[4] Strainer Housings are certified for a minimum daily flow of 158,400 gallons per day. 
    
    [AA]  MOC
          SS304 (S4), SS316(S6)
    
    [J]   BODY CONFIGURATION STYLE 
          Inline (0), Offset (1), Same Side (2)
    
    [K]   CLOSURE AND BODY BASE CONFIGURATION STYLE 
          Swing bolt closure w/ flat bottom (A), ANSI closure w/ flat bottom (B), Swing bolt
    
          closure w/ domed bottom (C), ANSI closure w/ domed bottom (D) 
    
    [NN]  BODY DIAMETER 
          Available range from 04 to 60 
    
    [DD]  INLET & OUTLET SIZE 
          Available range from 2 to 36
    
    [P]   INLET CONFIGURATION STYLE (IF MODEL STANDARD, THIS MAY BE BLANK)
          Side in/side out (A), Inline (B), Side In Bottom Out (C), Same Side in/out (D),
    Dual 
          Side in/bottom out and same side in/out (CD), Top in/end out (E) 
    
    [MM]  DESIGN PRESSURE 
          ANSI 150 at 150F (1), ANSI 150 at 400F (2), ANSI 300 at 150F (3), ANSI 300 at 400F
    (4), 
          ANSI 600 at 150F (5), ANSI 600 at 400F (6), ANSI 900 at 150F (7), ANSI 900 at 400F
    (8), 
          ANSI 1500 at 150F (9), ANSI 1500 at 400F (10), ANSI 2500 at 150F (11), ANSI 2500
    at 
          400F (12)
    
    [Q]   OPTIONAL NON-MATERIAL VESSEL MOFICATIONS (MAY NOT BE NOTED) 
          Standard mechanical davit (K1), Hinge (K2), Hydraulic jack davit side (K3), 
          Hydraulic jack davit top (K4), Pogo (K5), Hinge with spring assist (K6), 
          Hydraulic clam style (K7), Hydraulic top mount with side 
          pump (K8), Hydraulic jack davit side with bearings (K9)
    
    [PPP] SCREEN SIZE
          Available range of 50 to 2,000
    
    [QQ]  SCREEN MOC
          SS316 (S6)
    
    [R]   CONTROL PANEL
          Semi-automatic (L1), Automatic (L2), Custom automatic (L3)

NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
      documentation shipped with the product are Certified.
      
      


Facility : Cambridge, Ontario, Canada

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Component, POE
Mera Felt Bag Filter MF61 Series MF61-PO-[A]-[B]-PS [1] CLD 23 PP

[1] Mera Felt Bag Filter MF61 Series MF61-PO-[A]-[B]-PS, where; 
    [A] - Micron rating
          3 to 100 microns
    [B] - Size
          1 - Size 1 (16 inch length)
          2 - Size 2 (32 inch length)



 
FilmTec Corporation 
5400 Dewey Hill Road
Edina, MN 55439 
United States 
833-338-7668 
833-338-7668
Visit this company's website


Facility : # 1 Korea

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Reverse Osmosis Element[1] [G]
NF270-4040 W 4" x 40" CLD 23 MLTPL
NF90-4040 W 4" x 40" CLD 23 MLTPL

[1] Certified for the following minimum daily flow rates:
    BW30 PRO-4040 and TW30 PRO-4040 are certified for a minimum flow of 2,210 gallons per
    day.
    XLE PRO-4040 are certified for a minimum flow of 2,210 gallons per day.
    BW30 PRO-4040 and TW30 PRO-4040 require a 0.5 hour pre-service flush at a flow rate of
    1.8 gallons per minute (gpm) with de-ionized water.
    XLE PRO-4040 requires a 0.5 hour pre-service flush at a flow rate of 1.9 gallons per
    minute (gpm) with de-ionized water.
    SW30-4040 W (12082966) is certified for a minimum daily flow of 12,500 L. SW30-2540 W
    (12082989) is certified for a minimum daily flow of 5,000 L 
    NF90-4040 W and NF270-4040 W are certified for a minimum daily flow of 2,059 L. 
[2] Products are certified for a minimum daily permeate generation of 36,000 liters.
    Products require a pre-service flush for 0.5 hours (30 minutes) at 100 psi.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



Facility : # 2 Saudi Arabia

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Reverse Osmosis Element [G]
BW30XFRLE 400-34 (99044371)[6] 8" x 40" CLD 23 MLTPL
BW30XFRLE 400-34 (99044497)[6] 8" x 40" CLD 23 MLTPL
BW30XFRLE 400-34i A (99044306)[4] [5] 8" x 40" CLD 23 MLTPL
BW30XFRLE-400-34i D (99044372)[4] [5] 8" x 40" CLD 23 MLTPL
FILMTEC™ SOAR 7000i A (12030969)[7] 8" x 40" CLD 23 MLTPL
FILMTEC™ SOAR 7000i D (12030968)[7] 8" x 40" CLD 23 MLTPL
FILMTEC™ SOAR 8000 A (12121400)[8] 8' x 40" CLD 23 MLTPL
FILMTEC™ SOAR 8000 D (12121389)[8] 8' x 40" CLD 23 MLTPL
FILMTEC™ SOAR 8000i A (12121087)[8] 8' x 40" CLD 23 MLTPL
FILMTEC™ SOAR 8000i D (12121388)[8] 8' x 40" CLD 23 MLTPL
FORTILIFE™ CR100 A (12112290)[4] [6] 8" x 40" CLD 23 MLTPL
FORTILIFE™ CR100 D (12112287)[4] [6] 8" x 40" CLD 23 MLTPL
FORTILIFE™ CR100i A (12112311)[4] [6] 8" x 40" CLD 23 MLTPL
FORTILIFE™ CR100i D (12112312)[4] [6] 8" x 40" CLD 23 MLTPL
FORTILIFE™ NF1000 A (12089511)[8] 8" x 40" CLD 23 MLTPL
FORTILIFE™ NF1000 D (12089533)[8] 8" x 40" CLD 23 MLTPL
FORTILIFE™ NF1000 HP A (12089513)[8] 8" x 40" CLD 23 MLTPL
FORTILIFE™ XC70 (A) (12010199)[8] 8" x 40" CLD 23 MLTPL
FORTILIFE™ XC70 D (12087369)[8] 8" x 40" CLD 23 MLTPL
NF270-400-34 A (12123365)[9] 8" x 40" CLD 23 MLTPL
NF270-400-34i A (11023068)[9] 8" x 40" CLD 23 MLTPL
NF270-400-34i A (12123338)[9] 8" x 40" CLD 23 MLTPL
NF270-400-34i D (11023070)[9] 8" x 40" CLD 23 MLTPL
NF270-400-34i D (12123318)[9] 8" x 40" CLD 23 MLTPL
NF270-400-34 D (12073764)[9] 8" x 40" CLD 23 MLTPL
NF270-400-34 D (12123366)[9] 8" x 40" CLD 23 MLTPL
NF90-400-34i A (11023067)[10] 8" x 40" CLD 23 MLTPL
NF90-400-34i D (11023066)[10] 8" x 40" CLD 23 MLTPL
NF90-400-34 D (12073762)[10] 8" x 40" CLD 23 MLTPL
NF90-400-34 W (12073763)[10] 8" x 40" CLD 23 MLTPL
SW30XFR-400-34 A (99104361)[12] 8" x 40" CLD 23 MLTPL
SW30XFR-400-34 D (12022636)[12] 8" x 40" CLD 23 MLTPL
SW30XFR-400-34 W (99104360)[12] 8" x 40" CLD 23 MLTPL
SW30XFR-400-34i A (12020446)[12] 8" x 40" CLD 23 MLTPL
SW30XFR-400-34i D (12022637)[12] 8" x 40" CLD 23 MLTPL
SW30XFR-400-34i W (12020475)[12] 8" x 40" CLD 23 MLTPL

[1] Elements sold under 12030646 SW 8040 SP or 12030564 BW 8040 SP are marked as "surplus"
    before shipping to customers.
[2] Certified for a minimum daily permeate generation of 47,300 liters.
[3] Certified for a minimum flow of 35,960 liters per day.  Product requires a pre-rinse of
    0.5 hour (30 minutes)
    at 100 psi.
[4] Product requires a pre-rinse of 0.5 hour (30 minutes) at 100 psi. 
[5] Product requires a 1 hour flush at 400 psi.
[6] BW30XHR PRO-400/34i (D) (12075583), BW30XHR PRO-400/34i (A) (12075762), 
    FORTILIFE™ CR100 A (12112290), FORTILIFE™ CR100 D (12112287), FORTILIFE™ CR100i A
    (12112311) and FORTILIFE™ CR100i D (12112312) are certified for a minimum daily permeate
    generation of 36,998 liters. 
    
    BW30HRLE-440 A (99044291), BW30HRLE-440 D (99044262), BW30HRLE-440i A (99044231),
    BW30HRLE-440i D (99044309), BW30HR-440i A (317487), BW30HR-440i D (317529), BW30XHR 440i
     A (12080554) and BW30XHR 440i  D (12080604) are certified for a minimum daily permeate
    generation of 40,698 liters.
    
    BW30XFRLE 400-34 (99044371), BW30XFRLE 400-34 (99044497), BW30XFRLE 400-34i A (99044306)
    and BW30XFRLE-400-34i D (99044372) are certified for a minimum daily permeate generation
    of 33,781 liters. 
    
    All other elements are certified for a minimum daily permeate generation of 35,960
    liters.
[7] SW30XLE 400-34 (12113160) W and SW30XLE 400-34 (12113161) D are certified for a minimum
    permeate flow rate of 7,650 gallons/day.
[8] 28,958 liters/day:
    FORTILIFE™ XC70 (A) (12010199)
    FORTILIFE™ XC70 D (12087369)
    FILMTEC™ SOAR 8000 D (12121389)
    FILMTEC™ SOAR 8000 A (12121400)
    FILMTEC™ SOAR 8000i D (12121388)
    FILMTEC™ SOAR 8000i A (12121087)
    SW30XLE-400-34i D (12123315)      
    SW30XLE-400-34i A (12123269)
    
    34,163 liters/day:
    FORTILIFE™ NF1000  A (12089511)
    FORTILIFE™ NF1000 HP A (12089513)
    FORTILIFE™ NF1000 D (12089533)
[9] Trade names NF270-400-34 A (12123365), NF270-400-34 A (12073738), NF270-400-34 D
    (12073764) and NF270-400-34 D (12123366) are certified for a minimum daily flow of 2,059
    liters per day. Trade names NF270-400-34i D (11023070), NF270-400-34i D (12123318),
    NF270-400-34i A (11023068) and NF270-400-34i A (12123338) are certified for a minimum
    daily flow of 2,500 liters per day. Products requires a per-service flush for 30 minutes
    at 100 psi.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.
[10] Trade names NF90-400-34 D (12073762) and NF90-400-34 W (12073763) are certified for a
     minimum daily flow rate of 2,059 liters.
     
     Trade names NF90-400-34i D (11023066) and NF90-400-34i A (11023067) are certified for a
     minimum daily flow volume of 28,400 liters.
     
     Product requires a pre-service flush for 0.5 hours (30 minutes) at 100 psi.
[11] Certified for a minimum daily permeate generation of 29,116 liters.
[12] The 8” x 40” elements (SW30HRLE-440i), SW30HRLE-440i A (365222) are certified for a
     minimum daily flow of 5,678 L.
     
     The 8” x 40” elements (SW30XFR-400-34 W (99104360), SW30XFR-400-34i D (12022637),
     SW30XFR-400-34 A (99104361), SW30XFR-400-34i A (12020446) and SW30XFR-400-34i W
     (12020475) are certified for a minimum daily flow of 18,168 L.
     
     The 8” x 40” elements (SW30HR-380, SW30XFR-400-34 D (12022636), SW30HR-380 D (12022650),
     SW30HRLE-400 and SW30HRLE-440) are certified for a minimum daily flow of 21,558 L.



Facility : # 4 China

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Reverse Osmosis Element: Point of Entry[1] [2] [G]
TapTec™ LC HF 4040 3.9" x 40" CLD 23 MLTPL

[1] Flushing Procedure: The TapTec™ LC HF 4040 is flushed for 8 hrs at 100 PSI with
    de-ionized water.
[2] Certified for POE end use.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



Facility : Building 5400, Edina, MN

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Filtration Devices/Components [G]
12016088 NF245 CR [1] CLD 23 OTHER
12072945 SW30XLE 31.0 [2] CLD 23 OTHER
12107190 SW30HRLE 27.0 [3] CLD 23 OTHER
216814 NF [4] CLD 23 OTHER
216816 NF90 [5] CLD 23 OTHER
216817 NF270 [6] CLD 23 OTHER
301451 NF245 [1] CLD 23 OTHER
341791 SW30ULE [7] CLD 23 OTHER
341792 SW30XLE [8] CLD 23 OTHER
99048682 BW30HRLE 28.5 [9] CLD 23 OTHER

[1] Certified for a maximum surface area of 390 sq. ft.  
    
    Certified for a minimum daily flow of 1,530 gallons. Product requires a pre-rinse of 0.5
    hour (30 minutes) at 100 psi.
[2] Certified for a maximum surface area of 480 sq. ft. Certified for a minimum permeate
    flow rate of 1,500 gallons/day. Product requires a 1 hour flush at 400 psi. 
[3] Product requires a 1 hour flush at 400 psi prior to being placed into service. Certified
    for a minimum daily flow of 29,116 L. Certified for a maximum membrane surface area of
    440 square feet.
[4] Certified for a maximum surface area of 400 sq. ft.  
    
    Certified for a minimum daily flow of 1,530 gallons. Product requires a pre-rinse of 0.5
    hour (30 minutes) at 100 psi.
[5] Certified for a maximum surface area of 400 sq. ft.  
    
    Certified for a minimum daily flow of 2,059 liters. Product requires a pre-rinse of 0.5
    hour (30 minutes) at 100 psi.
[6] Certified for a maximum surface area of 400 sq. ft.  
    
    Certified for a minimum daily flow of 2,059 liters. Product requires a pre-rinse of 0.5
    hour (30 minutes) at 100 psi.
[7] Certified for a maximum surface area of 440 sq. ft.  
    
    Certified for a minimum daily flow of 7,140 gallons. Product requires a 1 hour flush at
    400 psi.
[8] SW30XLE-400 and SW30XLE-440 are certified for a minimum permeate flow rate of 8,200
    gallons/day.
    
    SW30XLE 400-34 (12113160) W and SW30XLE 400-34 (12113161) D are certified for a minimum
    permeate flow rate of 7,650 gallons/day.
    
    SW30XLE-440i and FilmTec™ SOAR 7000i are certified for a minimum permeate flow rate of
    1,500 gallons/day.
    
    Product requires a per-service flush for 1 hour at 400 psi.
[9] Certified for a maximum surface area of 440 sq. ft.  
    
    Certified for a minimum daily flow of 3,785 liters. Product requires a pre-rinse of 0.5
    hour (30 minutes) at 100 psi.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

Reverse Osmosis Element [G]
423G FF 367636 (W)[11] 4" x 40" CLD 23 MLTPL
423G FF 367716 (D)[11] 4" x 40" CLD 23 MLTPL
BW30XFR-400-34 (D) 11022769[14] [15] CLD 23 MLTPL
BW30XFR-400-34 A (11025073)[14] [15] CLD 23 MLTPL
BW30XFR-400-34i A (297346)[14] [15] CLD 23 MLTPL
BW30XFR-400-34i D (315924)[14] [15] CLD 23 MLTPL
BW30XFRLE-400-34 A (99044371)[16] [17] CLD 23 MLTPL
BW30XFRLE-400-34 D (99044497) CLD 23 MLTPL
BW30XFRLE-400-34i A (99044306)[16] [17] CLD 23 MLTPL
BW30XFRLE-400-34i D (99044372)[16] [17] CLD 23 MLTPL
FILMTEC HYPERSHELL™ HSRO-390 A 346586[21] 8" x 40" CLD 23 MLTPL
FILMTEC HYPERSHELL™ HSRO-390 M W 12071896[14] 8" x 40" CLD 23 MLTPL
FILMTEC HYPERSHELL™ NF-8038 A (365935)[21] 8" x 40" CLD 23 MLTPL
FILMTEC HYPERSHELL™ RO-390 A (346364)[11] 8" x 40" CLD 23 MLTPL
FILMTEC HYPERSHELL™ RO-8038 A 302218[11] 8" x 40" CLD 23 MLTPL
FILMTEC HYPERSHELL™ RO-8038 D 12088977[11] 8" x 40" CLD 23 MLTPL
FILMTEC HYPERSHELL™ RO-8038 M W (12071895)[11] 8" x 40" CLD 23 MLTPL
FILMTEC HYPERSHELL™ RO-8038-48 A (360400)[11] 8" x 40" CLD 23 MLTPL
FILMTEC HYPERSHELL™ RO-8038-48 M W (12071858)[11] 8" x 40" CLD 23 MLTPL
FILMTEC™ HYPERSHELL™ NF245- 8038 A (336673)[22] 8" x 40" CLD 23 MLTPL
FILMTEC™ HYPERSHELL™ NF245N 8038-48 42000518 (A)[11] 8" x 40" CLD 23 MLTPL
FILMTEC™ HYPERSHELL™ NF245XD 8038-30 12100388 (A)[22] 8" x 40" CLD 23 MLTPL
FILMTEC™ HYPERSHELL™ NF245XD 8038-48 42000489 (A)[11] 8" x 40" CLD 23 MLTPL
FILMTEC™ NF245XD 3838-30 FF A (12100410)[22] 4" x 40" CLD 23 MLTPL
FILMTEC™ NF245XD 3840-30 FF A (12100389)[22] 4" x 40" CLD 23 MLTPL
FILMTEC™ NF245XD-3838-48-FF 42000519 (W)[22] 4" x 40" CLD 23 MLTPL
FILMTEC™ SOAR 8000 A (12121400)[14] 8' x 40" CLD 23 MLTPL
FILMTEC™ SOAR 8000 D (12121389)[14] 8' x 40" CLD 23 MLTPL
FILMTEC™ SOAR 8000i A (12121087)[14] 8' x 40" CLD 23 MLTPL
FILMTEC™ SOAR 8000i D (12121388)[14] 8' x 40" CLD 23 MLTPL
FORTILIFE™ CR100 A (12112290)[14] [15] CLD 23 MLTPL
FORTILIFE™ CR100 A (99029709)[14] [15] CLD 23 MLTPL
FORTILIFE™ CR100 D (12112287)[14] [15] CLD 23 MLTPL
FORTILIFE™ CR100 D (99029748)[14] [15] CLD 23 MLTPL
FORTILIFE™ CR100i A (12112311) [14] [15] CLD 23 MLTPL
FORTILIFE™ CR100i A (99029708)[14] [15] CLD 23 MLTPL
FORTILIFE™ CR100i D (12112312) [14] [15] CLD 23 MLTPL
FORTILIFE™ CR100i D (99029827)[14] [15] CLD 23 MLTPL
FORTILIFE™ CR200 A (12026677)[14] 8" x 40" CLD 23 MLTPL
FORTILIFE™ CR200 D (12026676)[14] 8" x 40" CLD 23 MLTPL
FilmTec™ SOAR 3000i A (12031044) [23] CLD 23 MLTPL
FilmTec™ SOAR 3000i D (12031050) [23] CLD 23 MLTPL
FilmTec™ SOAR 4000i A (12031009)[16] [17] CLD 23 MLTPL
FilmTec™ SOAR 4000i D (12031051) 8" x 40" CLD 23 MLTPL
FilmTec™ SOAR 5000 A (12119675)[14] 8" x 40" CLD 23 MLTPL
FilmTec™ SOAR 5000 D (12119804)[14] 8" x 40" CLD 23 MLTPL
FilmTec™ SOAR 5000i A (12031015)[14] [15] CLD 23 MLTPL
FilmTec™ SOAR 5000i A (12119678)[14] 8" x 40" CLD 23 MLTPL
FilmTec™ SOAR 5000i D (12031014)[14] [15] CLD 23 MLTPL
FilmTec™ SOAR 5000i D (12119673)[14] 8" x 40" CLD 23 MLTPL
FilmTec™ SOAR 6000i A (12030899)[16] [17] CLD 23 MLTPL
FilmTec™ SOAR 6000i D (12030971)[16] [17] CLD 23 MLTPL
FilmTec™ SOAR 7000i A (12030969)[24] [25] CLD 23 MLTPL
FilmTec™ SOAR 7000i D (12030968)[24] [25] CLD 23 MLTPL
Fortilife™ NF1000 A(12089511) [14] CLD 23 MLTPL
Fortilife™ NF1000 D(12089533) [14] CLD 23 MLTPL
Fortilife™ NF1000 HP A(12089513) [14] CLD 23 MLTPL
HSRO 4040 FF A 99033319[21] 4" x 40" CLD 23 MLTPL
HSRO-390 FF 170701 (D)[21] 8" x 40" CLD 23 MLTPL
HSRO-390 FF 92564 (W)[21] 8" x 40" CLD 23 MLTPL
HSRO-4040 FF 98592 (W)[21] 4" x 40" CLD 23 MLTPL
NF-3840-30-FF 146073 (A)[26] 4" x40" CLD 23 MLTPL
NF-400 151544 (W)[26] 8" x 40" CLD 23 MLTPL
NF270-400-34 A (12073738) [27] CLD 23 MLTPL
NF270-400-34 A (12123365) [27] CLD 23 MLTPL
NF270-400-34 D (12073764) [27] CLD 23 MLTPL
NF270-400-34 D (12123366) [27] CLD 23 MLTPL
NF270-400-34i (12123338) [27] CLD 23 MLTPL
NF270-400-34i A (11023068) [27] CLD 23 MLTPL
NF270-400-34i D (11023070) [27] CLD 23 MLTPL
NF270-400-34i D (12123318) [27] CLD 23 MLTPL
NF270-440 A (12027210) [27] CLD 23 MLTPL
NF270-440 D (12027108) [27] CLD 23 MLTPL
NF270B-400-34 A (12082717) [28] CLD 23 MLTPL
NF270B-400-34 D (12082811) [28] CLD 23 MLTPL
NF270B-440 A (12082813) [28] CLD 23 MLTPL
NF270B-440 D (12082814) [28] CLD 23 MLTPL
NF90-400-34 D (12073762) [23] CLD 23 MLTPL
NF90-400-34 W (12073763) [23] CLD 23 MLTPL
NF90-400-34i A (11023067) [23] CLD 23 MLTPL
NF90-400-34i D (11023066) [23] CLD 23 MLTPL
NF90B-400 W (12082237) [23] CLD 23 MLTPL
NF90B-400-34 A (12082246) [23] CLD 23 MLTPL
NF90B-400-34 D (12082260) [23] CLD 23 MLTPL
RO-3838-30 FF A 80589[11] 3.8" x 38" CLD 23 MLTPL
RO-3840-30 FF 108664 (W)[11] 4" x 40" CLD 23 MLTPL
RO-390 FF 100608 (W)[11] 8" x 40" CLD 23 MLTPL
RO-390 FF 116314 (D)[11] 8" x 40" CLD 23 MLTPL
RO-4040 FF A 84286[11] 4" x 40" CLD 23 MLTPL
RO-4040 FF A 99033320[11] 4" x 40" CLD 23 MLTPL
SW30XFR-400-34 A (99104361)[29] 8" x 40" CLD 23 MLTPL
SW30XFR-400-34 D (12022636)[29] 8" x 40" CLD 23 MLTPL
SW30XFR-400-34 W (99104360)[29] 8" x 40" CLD 23 MLTPL
SW30XFR-400-34i A (12020446)[29] 8" x 40" CLD 23 MLTPL
SW30XFR-400-34i D (12022637)[29] 8" x 40" CLD 23 MLTPL
SW30XFR-400-34i W (12020475)[29] 8" x 40" CLD 23 MLTPL

[8] SW30XLE-400 and SW30XLE-440 are certified for a minimum permeate flow rate of 8,200
    gallons/day.
    
    SW30XLE 400-34 (12113160) W and SW30XLE 400-34 (12113161) D are certified for a minimum
    permeate flow rate of 7,650 gallons/day.
    
    SW30XLE-440i and FilmTec™ SOAR 7000i are certified for a minimum permeate flow rate of
    1,500 gallons/day.
    
    Product requires a per-service flush for 1 hour at 400 psi.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.
[10] Elements sold under 12030646 SW 8040 SP or 12030564 BW 8040 SP are marked as "surplus"
     before shipping to customers. 
[11] Sizes are expressed as diameter x length.  
     
     Certified for a minimum daily flow of 1,650 gallons.  
     
     Product requires a pre-rinse of 0.5 hour (30 minutes) at 100 psi.
[12] Trade names BW30-365 A (279222), BW30-365 D (80773), BW30 PRO-365 D (12075864), BW30
     PRO-365 W (12075881), BW30-400 A(279234), BW30 PRO-400 A (12075562), BW30-400 D (98650),
     BW30 PRO-400 D (12075563), BW30-400 W (93396), BW30 PRO-400-34 A (12075564), BW30
     PRO-400-34 D (12075565), BW30-400-34i A (279236) BW30 PRO-400-34i A (12075703),
     BW30-400-34i D (248151) and BW30 PRO-400-34i D (12075587) are certified for a minimum
     daily flow of 35,960 liters per day.
[13] BW30-365 A (279222), BW30-365 D (80773), BW30 PRO-365 D (12075864), BW30 PRO-365 W
     (12075881), BW30 PRO-400A (12075562), BW30-400 D (98650), ), BW30 PRO-400D (12075563),
     BW30-400 W (93396), BW30 PRO-400-34A (12075564), BW30 PRO-400-34D (12075565),
     BW30-400-34i A (279236) BW30 PRO-400-34i (12075703), BW30-400-34i D (248151), BW30
     PRO-400-34i (12075587) models are certified for a minimum daily flow of 36,000 liters
     per day.
[14] 40,698 liters/day:
     BW30HR-440 A (11025076)
     BW30XHR PRO-440 A (12029161)
     BW30XHR 440i  A (12080554)
     BW30HR-440 D (11025074)
     BW30XHR PRO-440 D (12029154)
     BW30XHR 440i  D (12080604)
     BW30HR-440i A (317487)
     BW30HR-440i D (317529)
     
     36,998 liters/day:
     BW30XFR-400-34 (D) (11022769)
     BW30XHR PRO-400-34 D (12075704)
     BW30XFR-400-34 A (11025073)
     BW30XHR PRO-400-34 A (12075640)
     BW30XFR-400-34i A (297346)
     BW30XHR PRO-400-34i A (12075762)
     BW30XFR-400-34i D (315924)
     BW30XHR PRO-400-34i D (12075583)
     FORTILIFE™ CR100 A (99029709)
     FORTILIFE™ CR100 D (99029748)
     FORTILIFE™ CR100i A (99029708)
     FORTILIFE™ CR100i D (99029827)
     FORTILIFE™ CR100 A (12112290)
     FORTILIFE™ CR100 D (12112287)
     FORTILIFE™ CR100i A (12112311)
     FORTILIFE™ CR100i D (12112312)
     FilmTec™ SOAR 5000i D (12031014)
     FilmTec™ SOAR 5000 D (12119804)
     FilmTec™ SOAR 5000i D (12119673)
     FilmTec™ SOAR 5000i A (12031015)
     FilmTec™ SOAR 5000 A (12119675)
     FilmTec™ SOAR 5000i A (12119678)
     
     28,958 liters/day:
     FILMTEC™ SOAR 8000 D (12121389)
     FILMTEC™ SOAR 8000 A (12121400)
     FILMTEC™ SOAR 8000i D (12121388)
     FILMTEC™ SOAR 8000i A (12121087)
     SW30XLE-400-34i D (12123315)      
     SW30XLE-400-34i A (12123269)
     
     12,000 liters/day
     FORTILIFE™ CR200 A (12026677)
     FORTILIFE™ CR200 D (12026676)
     
     10,780 liters/day
     		
     
[15] Certified sizes are 8" x 40" or 4" x 40".
[16] Product requires a pre-rinse of 0.5 hour (30 minutes) at 100 psi.
     
     Certified for the following minimum permeate flow:
     
     40,698 liters/day:
     BW30HRLE-440 A (99044291)
     BW30HRLE-440 D (99044262)
     BW30HRLE-440 W (99044294)
     BW30HRLE-440i W (99044305)
     BW30HRLE-440i A (99044231)
     BW30HRLE-440i D (99044309)
     ECO PRO 440 A (99041027)
     ECO PRO 440 D (99040991)
     ECO PRO 440i A (99041026)
     ECO PRO 440i D (99041000)
     ECO Platinum 440i A (99046537)
     ECO Platinum 440i D (99046696)
     
     33,781 liters per day:
     FilmTec™ SOAR 4000i D
     FilmTec™ SOAR 4000i A
     BW30XFRLE-400/34 A (99044371)
     BW30XFRLE-400/34 D (99044497)
     BW30XFRLE-400/34i A (99044306)
     BW30XFRLE-400/34i D (99044372)
     
     36,998 liters/day:
     ECO PRO 400 D (99040808)
     ECO PRO 400 W (99040807)
     ECO PRO 400i A (99046698)
     ECO PRO 400i D (99046699)
     
     29,116 liters/day:
     FilmTec™ SOAR 6000i D
     FilmTec™ SOAR 6000i A
     SEAMAXX-440 A (12017690)
     SEAMAXX-440i A (12017691)
     SEAMAXX-440 D (12020606)
     SEAMAXX-440i D (12020605)
[17] Certified size is 8" x 40".
[18] Certified for the following minimum permeate flows:
     
     36,998 liters/day:
     BW30XHR PRO-400-34 D 12075704
     BW30XHR PRO-400-34 A 12075640
     BW30XHR PRO-400-34i A 12075762
     BW30XHR PRO-400-34i D 12075583
[19] Certified for a minimum daily permeate generation of 47,300 liters per day. 
     Product requires a pre-service flush at 9.7 gallons per minute (gpm) for 1 hour. 
     W in the trade name indicates the element is shipped wet.
     D in the trade name indicates the element is shipped dry.
     A in the trade name indicates the element is shipped with a certification statement.
[20] Certified for a minimum daily flow of 7,400 gallons. Product requires a pre-rinse of
     2000 ppm NaCl at 12 GPM (125 psi) for 1 hour. Certified size is 6" x 40". Size is
     expressed as diameter x length. W in the trade name indicates the element is shipped
     wet. D in the trade name indicates the element is shipped dry. A in the trade name
     indicates the element is shipped with a certification statement.
[21] Sizes are expressed as diameter x length. 
      
     Certified for a minimum daily flow of 2,900 gallons.  
     
     Product requires a pre-rinse of 0.5 hour (30 minutes) at 100 psi.
[22] Sizes are expressed as diameter x length.
       
     Certified for a minimum daily flow of 1,530 gallons.  
     
     Product requires a 30-minute flush at 100 psi.
[23] NF90-400-34 D (12073762), NF90-400-34 W (12073763), NF90B-400 W (12082237), NF90B-400-34
     D (12082260) and NF90B-400-34 A (12082246) models are certified for a minimum daily flow
     rate of 2,059 liters per day. NF90-400-34i D (11023066),  NF90-400-34i A (11023067)
     FilmTec™ SOAR 3000i D (12031050) and FilmTec™ SOAR 3000i A (12031044) are certified for
     a minimum daily flow rate of 28,400 liters per day. Product requires a pre-rinse of 0.5
     hour (30 minutes) at 100 psi.
[24] The SW30XLE 480i, SW30XLE-370-34i, SWXLE-400 and SW30XLE-440 elements are Certified for
     a minimum permeate flow rate of 8,200 gallons/day.
     
     The SW30XLE-440i and FilmTec™ SOAR 7000i D and FilmTec™ SOAR 7000i A elements are
     certified for a minimum permeate flow rate of 1,500 gallons/day.
     
     Product requires a 1 hour flush at 400 psi.  
     
     Size is expressed as diameter x length. 
     
     - D in the trade name indicates the element is shipped dry
     - W in the trade name indicates the element is shipped wet 
     - A in the trade name indicates the element is shipped with a certification statement.
[25] Certified size is 8" x 40"
[26] Sizes are expressed as diameter x length. 
     
     Certified for a minimum daily flow of 2,400 gallons.
       
     Product requires a pre-rinse of 0.5 hour (30 minutes) at 100 psi.
[27] NF270-400-34 A (12073738), NF270-400-34 D (12073764), NF270-400-34 A (12123365) and
     NF270-400-34 D (12123366) are certified for a minimum daily permeate generation of 2,059
     liters.
     NF270-400-34i D (11023070), NF270-400-34i A (11023068), NF270 440 A (12027210), NF270
     440 D (12027108), NF270B-400-34 A (12082717), NF270B-400-34 D (12082811), NF270B-440 A
     (12082813), NF270B-440 D (12082814), NF270-400-34i A (12123338) and NF270-400-34i D
     (12123318) are certified for a minimum daily permeate generation of 2,500 liters. 
     Product requires a flush for 30 minutes at 100 psi.
[28] NF270-400-34i D (11023070), NF270-400-34i A (11023068), NF270 440 A (12027210), NF270
     440 D (12027108), NF270B 85.0 (12082679), NF270B-400-34 A (12082717), NF270B-400-34 D
     (12082811), NF270B-440 A (12082813) and NF270B-440 D (12082814) are certified for a
     minimum daily flow of 2,500 liters per day.
[29] Product requires a 1 hour flush at 400 psi.  
     
     The 4" x 40" element is Certified for a minimum daily flow of 4,846 L. 
     
     The 8" x 40" elements (SW30HRLE-440i) are Certified for a minimum daily flow of 5,678 L.
     
     The 8” x 40” elements (SW30XFR-400-34 A (99104361), SW30XFR-400-34 D (12022636)and
     SW30XFR-400-34 W (99104360), SW30XFR-400-34i A (12020446), SW30XFR-400-34i D (12022637)
     and SW30XFR-400-34i W (12020475) are certified for a minimum daily flow of 18,168 L. 
     
     The 8" x 40" elements (SW30HR-380, SW30XFR-400-34 D (12022636), SW30HR-380 D (12022650)
     SW30HRLE-400, SW30HRLE-400i and SW30HRLE-440) are Certified for a minimum daily flow of
     21,558 L.
[30] Certified for a minimum daily flow of 5,100 Gallons.
     
     Element size is 8" x 40".
     
     Product requires a 1 hour flush at 400 psi.
[31] Trade name SWBR-200 A (12098108) is certified for a minimum daily flow rate of 40,220
     liters.
[32] XLE-2540 W (154544) models are certified for a minimum daily flow of 3,123 liters per
     day.  XLE-440i A (325275), XLE-440 W (101060), XLE-440 A (279216), XLE-B-440 (12013838),
     XLE-440i W (324657) and XLE-440 W (12084640) models are certified for a minimum daily
     flow of 47,300 liters per day.



 
FilmTec Water USA, LLC 
200 Powder Mill Road
Building 302 
Wilmington, DE 19803 
United States 
989-638-6231


Facility : Zhejiang, China

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Ultrafiltration Devices
IntegraFlo™ IC-52XP[7] [8] 6" x 80" CLD 23 MLTPL
IntegraFlux™ Ultrafiltration Module SFD-2860XP[1] [2] [3] [9] 8 x 60" CLD 23 MLTPL
IntegraFlux™ Ultrafiltration Module SFD-2880XP[1] [2] [3] [9] 8 x 80" CLD 23 MLTPL
IntegraPac™ IPD-51[1] [2] [3] [4] 8" x 60" CLD 23 MLTPL
IntegraPac™ IPD-51XP[1] [2] [3] [4] 8" x 60" CLD 23 MLTPL
IntegraPac™ IPD-77[1] [2] [3] [4] 8" x 80" CLD 23 MLTPL
IntegraPac™ IPD-77XP[1] [2] [3] [4] 8" x 80" CLD 23 MLTPL
IntegraPac™ Ultrafiltration Skid IPD-51-10[1] [5] CLD 23 MLTPL
IntegraPac™ Ultrafiltration Skid IPD-51-12[1] [5] CLD 23 MLTPL
IntegraPac™ Ultrafiltration Skid IPD-51-14[1] [5] CLD 23 MLTPL
IntegraPac™ Ultrafiltration Skid IPD-51-16[1] [5] CLD 23 MLTPL
IntegraPac™ Ultrafiltration Skid IPD-51-18[1] [5] CLD 23 MLTPL
IntegraPac™ Ultrafiltration Skid IPD-51-22[1] [5] CLD 23 MLTPL
IntegraPac™ Ultrafiltration Skid IPD-51-6[1] [5] CLD 23 MLTPL
IntegraPac™ Ultrafiltration Skid IPD-51-8[1] [5] CLD 23 MLTPL
IntegraPac™ Ultrafiltration Skid IPD-51XP-18[1] [5] CLD 23 MLTPL
IntegraPac™ Ultrafiltration Skid IPD-51XP-20[1] [5] CLD 23 MLTPL
IntegraPac™ Ultrafiltration Skid IPD-51XP-22[1] [5] CLD 23 MLTPL
IntegraPac™ Ultrafiltration Skid IPD-51XP-6[1] [5] CLD 23 MLTPL
IntegraPac™ Ultrafiltration Skid IPD-51XP-8[1] [5] CLD 23 MLTPL
IntegraPac™ Ultrafiltration Skid IPD-77-10[1] [5] CLD 23 MLTPL
IntegraPac™ Ultrafiltration Skid IPD-77-12[1] [5] CLD 23 MLTPL
IntegraPac™ Ultrafiltration Skid IPD-77-14[1] [5] CLD 23 MLTPL
IntegraPac™ Ultrafiltration Skid IPD-77-16[1] [5] CLD 23 MLTPL
IntegraPac™ Ultrafiltration Skid IPD-77-18[1] [5] CLD 23 MLTPL
IntegraPac™ Ultrafiltration Skid IPD-77-20[1] [5] CLD 23 MLTPL
IntegraPac™ Ultrafiltration Skid IPD-77-22[1] [5] CLD 23 MLTPL
IntegraPac™ Ultrafiltration Skid IPD-77-6[1] [5] CLD 23 MLTPL
IntegraPac™ Ultrafiltration Skid IPD-77-8[1] [5] CLD 23 MLTPL
IntegraPac™ Ultrafiltration Skid IPD-77XP-10[1] [5] CLD 23 MLTPL
IntegraPac™ Ultrafiltration Skid IPD-77XP-12[1] [5] CLD 23 MLTPL
IntegraPac™ Ultrafiltration Skid IPD-77XP-14[1] [5] CLD 23 MLTPL
IntegraPac™ Ultrafiltration Skid IPD-77XP-16[1] [5] CLD 23 MLTPL
IntegraPac™ Ultrafiltration Skid IPD-77XP-18[1] [5] CLD 23 MLTPL
IntegraPac™ Ultrafiltration Skid IPD-77XP-20[1] [5] CLD 23 MLTPL
IntegraPac™ Ultrafiltration Skid IPD-77XP-22[1] [5] CLD 23 MLTPL
IntegraPac™ Ultrafiltration Skid IPD-77XP-6[1] [5] CLD 23 MLTPL
IntegraPac™ Ultrafiltration Skid IPD-77XP-8[1] [5] CLD 23 MLTPL
IntegraPac™ UltrafiltrationSkid IPD-51-20[1] [5] CLD 23 MLTPL
IntegraTec™ IPD-51[1] [2] [3] [4] 8" x 60" CLD 23 MLTPL
IntegraTec™ IPD-77[1] [2] [3] [4] 8" x 80" CLD 23 MLTPL
IntegraTec™ XP 36 ESI[6] 8.9" x 66.1" CLD 23 MLTPL
IntegraTec™ XP 51[1] [2] [3] [9] 8" x 60" CLD 23 MLTPL
IntegraTec™ XP 51 IP[1] [2] [3] 8" x 60" CLD 23 MLTPL
IntegraTec™ XP 52 IC[7] [8] 6" x 80" CLD 23 MLTPL
IntegraTec™ XP 55 UXA[1] [2] [3] [9] 6" x 80" CLD 23 MLTPL
IntegraTec™ XP 55 UXA V[1] [2] [3] 6" x 80" CLD 23 MLTPL
IntegraTec™ XP 77[1] [2] [3] [9] 8" x 60" CLD 23 MLTPL
IntegraTec™ XP 77 IP[1] [2] [3] 8" x 80" CLD 23 MLTPL
IntegraTec™ XTP 100[1] [2] [3] [9] 8 x 80" CLD 23 MLTPL
IntegraTec™ XTP 100 IP[1] [2] [3] [9] 8" x 80" CLD 23 MLTPL
SFD-2660 (324166)[1] [2] [3] [9] 6 x 60" CLD 23 MLTPL
SFD-2680 (324167)[1] [2] [3] [9] 6 x 80" CLD 23 MLTPL
SFD-2860 (324168)[1] [2] [3] [9] 8 x 60" CLD 23 MLTPL
SFD-2880 (324169)[1] [2] [3] [9] 8 x 80" CLD 23 MLTPL
UXA-2680XP[1] [2] [3] [9] 6" x 80" CLD 23 MLTPL

[1] IntegraTec™ XTP 100 and IntegraTec™ XTP 100 IP are certified for a minimum daily flow of
    88,000 L.
    All other models are certified for a minimum daily flow of 18,612 L.
[2] Size is expressed as diameter x length.
[3] The Fiber Repair Kit has been approved for use with these modules.
[4] Also Certified for equivalent metric sizes.
[5] Size:
    IPD-51 Module (8" x 60")
    IPD-77 Module (8" x 80")
    IPD-51XP Module (8" x 60")
    IPD-77XP Module (8" x 80")
    The last number in the model designation refers to the number of modules in the skid.
[6] IntegraTec™ XP 36 ESI requires a pre-service flush of six (6) gallons per minute (gpm)
    for four (4) hours with tap water.
[7] Certified for a minimum daily flow of 44,000 liters per day. 
[8] Flushing Procedure:  The IntegraFlo IC-52XP is flushed for 4 hours at a flow rate of 7
    gallons per minute with de-ionized water.
[9] Products require a pre-service flush with tap water at a flow rate of 22 liters per
    minute for 4 hours.



 
Filtersafe 
Ha’Ella Street, POB 23
Tefen Industrial Park 
Tefen 2495900 
Israel 
972 4 6046000


Facility : Tefen, Israel

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Filtration Devices/Components[1]
TTN 100 40.6 x 286.7 cm CLD 23 MLTPL
TTN 200 61 x 323.9 cm CLD 23 MLTPL
TTN 400 103.2 x 380 cm CLD 23 MLTPL
TTN 500 103.2 x 430 cm CLD 23 MLTPL

[1] TTN 100 is certified for a minimum daily permeate flow of 720,000 liters per day.
    TTN 200 is certified for a minimum daily permeate flow of 960,000 liters per day.
    TTN 400 is certified for a minimum daily permeate flow of 1,200,000 liters per day.
    TTN 500 is certified for a minimum daily permeate flow of 1,920,000 liters per day. 
    
    TTN 100 requires a 2 hour flush at a flow rate of 25 liters per minute (lpm) with tap
    water.
    TTN 200 requires a 2 hour flush at a flow rate of 60 liters per minute (lpm) with tap
    water.
    TTN 400 requires a 2 hour flush at a flow rate of 200 liters per minute (lpm) with tap
    water.
    TTN 500 requires a 2 hour flush at a flow rate of 250 liters per minute (lpm) with tap
    water.



 
Filtration Technology Corporation 
11883 Cutten Road
Houston, TX 77066 
United States 
713-849-0849
Visit this company's website


Facility : Houston, TX

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Filtration Devices/Components
DP-600-PPXXYZ-Q1[1] 6" CLD 23 MLTPL
DP-601-PPXXYZ-Q1[1] 6" CLD 23 MLTPL
DP-603-PPXXYZ-Q1[1] 6" CLD 23 MLTPL
DP-605-PPXXYZ-Q1[1] 6" CLD 23 MLTPL
DP-607-PPXXYZ-Q1[1] 6" CLD 23 MLTPL
DP-608-PPXXYZ-Q1[1] 6" CLD 23 MLTPL
DP-609-PPXXYZ-Q1[1] 6" CLD 23 MLTPL
DP-610-PPXXYZ-Q1[1] 6" CLD 23 MLTPL
DP-611-PPXXYZ-Q1[1] 6" CLD 23 MLTPL
DPU-600-PPXXYZ-Q1[1] 6" CLD 23 MLTPL
DPU-601-PPXXYZ-Q1[1] 6" CLD 23 MLTPL
DPU-603-PPXXYZ-Q1[1] 6" CLD 23 MLTPL
DPU-605-PPXXYZ-Q1[1] 6" CLD 23 MLTPL
DPU-607-PPXXYZ-Q1[1] 6" CLD 23 MLTPL
DPU-608-PPXXYZ-Q1[1] 6" CLD 23 MLTPL
DPU-609-PPXXYZ-Q1[1] 6" CLD 23 MLTPL
DPU-610-PPXXYZ-Q1[1] 6" CLD 23 MLTPL
DPU-611-PPXXYZ-Q1[1] 6" CLD 23 MLTPL
PSS-74D-PP406 [2] 7" x 40" CLD 23 MLTPL
PSS-74E-PP406[2] 7" x 40" CLD 23 MLTPL
PSS-74F-PP406 [2] 7" x 40" CLD 23 MLTPL
PSS-74G-PP406 [2] 7" x 40" CLD 23 MLTPL
PSS-74H-PP406[2] 7" x 40" CLD 23 MLTPL
PSS-74K-PP406 [2] 7" x 40" CLD 23 MLTPL
PSS-74L-PP406[2] 7" x 40" CLD 23 MLTPL
PSSN-74D-PP406B[2] 7" x 40" CLD 23 MLTPL
PSSN-74E-PP406B[2] 7" x 40" CLD 23 MLTPL
PSSN-74F-PP406B[2] 7" x 40" CLD 23 MLTPL
PSSN-74G-PP406B[2] 7" x 40" CLD 23 MLTPL
PSSN-74H-PP406B[2] 7" x 40" CLD 23 MLTPL
PSSN-74J-PP406B[2] 7" x 40" CLD 23 MLTPL
PSSN-74K-PP406B[2] 7" x 40" CLD 23 MLTPL
PSSN-74L-PP406B[2] 7" x 40" CLD 23 MLTPL

[1] XX - Filter Length Code						
    20 - Filter Length						
    26 - Filter Length						
    40 - Filter Length						
    60 - Filter Length						
    Y  - Top End Cap Code						
    P  - High Flow Cap						
    1  - Bag Filter Cap						
    F  - Flare Cap						
    Z  - O-ring Seal Code						
    B  - Buna N						
    E  - EPDM						
    S  - Silicone						
    U  - Santoprene						
    Models are certified for a minimum daily filtrate generation of 4,750 gallons per 20" of
    length.				20" models (DPU-6##-PP20YZ-Q1, DP-6##-PP20YZ-Q1 ) are certified for a minimum
    daily filtrate generation of 4,750 gallons.						
    26" models (DPU-6##-PP26YZ-Q1, DP-6##-PP26YZ-Q1) are certified for a minimum daily
    filtrate generation of 6,175 gallons.						
    40" models (DPU-6##-PP40YZ-Q1, DP-6##-PP40YZ-Q1) are certified for a minimum daily
    filtrate generation of 9,500 gallons.						
    60" models (DPU-6##-PP60YZ-Q1, DP-6##-PP60YZ-Q1) are certified for a minimum daily
    filtrate generation of 14,250 gallons.
[2] Certified for minimum flow of 25 gallons per day.



 
Filtros Limited 
603 West Commercial Street
East Rochester, NY 14445 
United States 
1-800-633-2143 
585-586-8770
Visit this company's website


Facility : East Rochester, NY

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Miscellaneous Process Devices/Components [G]
Dome Diffuser [1] CLD 23 MLTPL
Filtros All-Ceramic Diffuser [1] CLD 23 MLTPL
Filtros Little Bubbly Diffuser [1] CLD 23 MLTPL

[1] Certified for one diffuser per 300 gallons of tank volume.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



 
FIP - Formatura Iniezione Polimeri S.p.A. 
Pian di Parata
I-16015 Casella Genova 
Italy 
39 010 96211
Visit this company's website


Facility : Genova, Italy

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Switches/Sensors[1] [G]
FLS F3.05.YZ-FLOW SWITCH 1/2" - 24" CLD 23 MLTPL
FLS F3.0S.T.YZ-PADDLEWHEEL SENSOR 1/2" - 24" CLD 23 MLTPL
FLS F6.61.YZ-HOT-TAP MAGMETER 2" - 36" CLD 23 MLTPL
FLS F6.6X.YZ MAGMETER 1/2: - 24" CLD 23 MLTPL

[1] S  - mounting feature
         0 - standard paddlewheel sensor
         1 - paddlewheel sensor for compact mounting
    T  - Technology of electronic transmission
         H - hall effect
         C - coil
         P - push-pull
    X  - Flow functionality
         0 - bidirectional standard sized FLS F3.0 model
         3 - mono-directional
    YZ - Number indication materials (sensor & gasket)
         09, 10, 11, 12, 38, 40 - mono and bi directional magmeters
         01 - hot tap magmeter and high pressure paddlewheel sensor
         01 thru 24 - paddlewheel sensor
         01 thru 12 - flow switch, paddlewheel transmitter and paddlewheel sensor for
    compact mounting
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

Transmitters/Gauges[1] [G]
FLS F6.30.YZ-PADDLEWHEEL TRANSMITTER 1/2" - 24" CLD 23 MLTPL

[1] S  - mounting feature
         0 - standard paddlewheel sensor
         1 - paddlewheel sensor for compact mounting
    T  - Technology of electronic transmission
         H - hall effect
         C - coil
         P - push-pull
    X  - Flow functionality
         0 - bidirectional standard sized FLS F3.0 model
         3 - mono-directional
    YZ - Number indication materials (sensor & gasket)
         09, 10, 11, 12, 38, 40 - mono and bi directional magmeters
         01 - hot tap magmeter and high pressure paddlewheel sensor
         01 thru 24 - paddlewheel sensor
         01 thru 12 - flow switch, paddlewheel transmitter and paddlewheel sensor for
    compact mounting
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

Valves [G]
Easyfit SXE(X)(Y)(Z)[2] 3/8" - 4" C. HOT MLTPL
Easyfit SXE(X)(Y)(Z)[3] 3/8" - 4" CLD 23 MLTPL
Easyfit VEE(X)(Y)(Z)[3] 3/8" - 4" CLD 23 MLTPL
Easyfit VXE(X)(Y)(Z)[2] 3/8" - 4" C. HOT MLTPL
Easyfit VXE(X)(Y)(Z)[3] 3/8" - 4" CLD 23 MLTPL
FE (X)(T)(Y) (Z) (W)[4] 40 mm - 400 mm CLD 23 MLTPL
FK (X)(T)(Y) (Z) (W)[6] 40 mm - 400 mm C. HOT MLTPL
FK (X)(T)(Y) (Z) (W)[5] 40 mm - 400 mm CLD 23 MLTPL
FX (X)(T)(Y) (Z) (W)[7] 40 mm - 400 mm CLD 23 MLTPL
FX (X)(T)(Y) (Z) (W)[7] 40 mm - 400 mm C. HOT MLTPL

[2] Certified for equivalent metric sizes.
    DualBlock TKD,LKD(X)(Y)(Z)
    X - End connection type
        IC AC NC FC IM DM FM OM OAM BM
    Y - Size
        Imperial (inches)
        012 034 038 100 112 114 200
        Metric (mm)
        016 020 025 032 040 050 063
    Z - O-ring type
        E - EPDM o-ring F - FPM o-ring
    DualBlock VKD(X)(Y)(Z)
    X - End Connection Type
        IC AC NC DC OC OAC FC IM DM FM OM OAM BM
    Y - Size
        Imperial (inches)
        012 034 038 100 112 114 200 212 300 400
        Metric (mm)
        016 020 025 032 040 050 063 075 090 110
    Z - O-ring type
        E - EPDM o-ring F - FPM o-ring
    /SHX - non-wetted stainless steel fasteners (optional)
    Easyfit VXE(X)(Y)(Z)
    X - End Connection Type
        IC AC NC FC
    Y - Size
        Imperial (inches)
        012 034 038 100 112 114 200 212 300 400
        Metric (mm)
        016 020 025 032 040 050 063 075 090 110
    Z - O-ring type
        E - EPDM o-ring F - FPM o-ring
    VX(X)(Y)(Z)
    X - End Connection Type
        IC AC NC FC
    Y - Size
        Imperial (inches)
        212 300 400
        Metric (mm)
        075 090 110
    Z - O-ring type
        E - EPDM o-ring F - FPM o-ring
    Easyfit SXE(X)(Y)(Z)
    X - End Connection Type
        IC, AC, NC, FC
    Y - Size 
        Imperial (inches)
        038 012 034 100 114 112 200 212 300 400
        Metric (mm)
        016 020 025 032 040 050 063 075 090 110
    Z - O-ring type
        E - EPDM F - FPM
    DualBlock VKR(X)(Y)(Z)
    X - End connection type
        IC DC LC FC AC NC JC GC OC OAC IM DM FM OM OAM BM
    Y - Size
        Imperial (inches)
        038 012 034 100 114 112 200
        Metric (mm)
        016 020 025 032 040 050 063
    Z - O-ring type
        E - EPDM o-ring F - FPM o-ring
    
    
[3] Certified for equivalent metric sizes.
    VE, VX
    X - End connection type
        IV FV LV AV NV JV GV
    Y - Size
        Imperial (inches)
        212 300 400
        Metric (mm)
        075 090 110 
    Z - O-ring type
        E - EPDM F - FPM
    VEE
    X - End Connection Type
        IV FV LV AV NV JV GV
    Y - Size 
        Imperial (inches)
        012 034 038 100 114 112 200 212 300 400
        Metric (mm)
        016 020 025 032 040 050 063 075 090 110
    Z - O-ring type
        E - EPDM F - FPM
    VKD
    X - End Connection Type
        IV FV LV AV NV JV GV/SHX IM DM FM OM OAM BM/SHX
    Y - Size
        Imperial (inches)
        038 012 034 100 114 112 200 212 300 400
        Metric (mm)
        016 020 025 032 040 050 063 075 090 110 
    Z - O-ring type
        E - EPDM F - FPM
    VXE
    X - End Connection Type
        IV DV FV LV AV NV JV GV
    Y - Size
        Imperial (inches)
        038 012 034 100 114 112 200 212 300 400
        Metric (mm)
        016 020 025 032 040 050 063 075 090 110
    Z - O-ring type
        E - EPDM F - FPM
    TKD, LKD
    X - End Connection Type
        AV DV FV GV IV JV LV NV IM DM FM BM OM OAM
    Y - Size
        Imperial (inches)
        038 012 034 100 114 112 200
        Metric (mm)
        016 020 025 032 040 050 063
    Z - O-ring type
        E - EPDM F - FPM
    SXE
    X - End Connection Type
        AV DV FV GV IV JV LV NV
    Y - Size Imperial (inches)
        038 012 034 100 114 112 200 212 300 400
        Metric (mm)
        016 020 025 032 040 050 063 075 090 110
    Z - O-ring type
        E - EPDM F - FPM
    VKR
    X - End connection type
        IV DV LV FV AV NV JV GV OV OAV IM DM FM OM OAM BM
    Y - Size
        Imperial (inches)
        038 012 034 100 114 112 200
        Metric (mm)
        016 020 025 032 040 050 063
    Z - O-ring type
        E - EPDM F - FPM
[4] FE (X)(T)(Y) (Z) (W)   
    X  - End connection type
    O  - Flanged ISO type
    OA - Flanged ANSI type
    T  - Disc Material PVC-U
    W  - Actuation type
         FM, LM, RM,CE, CP
    Y  - Size
         Metric (mm)
         050 063 075 090 110 140 160 225 280 315 355 400
         Imperial (inches)
         112, 200, 212 300 400 500 600 800 810 812 814 816
    Z  - Gasket type
    E  - EPDM
[5] FK (X)(T)(Y) (Z) (W)
    X   - End connection type
    O   - Flanged ISO type
    OA  - Flanged ANSI type
    OL  - Flanged lug ISO type
    OAL - Flanged lug ANSI type
    T   - Disc material PVC-U, PVC-C and PP-H
    W   - Actuation type
          FM, LM, RM, CE, CP
    Y   - Size
          Metric (mm)
          050 063 075 090 110 140 160 225 280 315 355 400
          Imperial (inches)
          112 200 212 300 400 500 600 800 810 812 814 816
    Z   - Gasket type
    E   - EPDM
[6] FK (X)(T)(Y) (Z) (W)
    X   - End connection type
    O   - Flanged ISO type
    OA  - Flanged ANSI type
    OL  - Flanged lug ISO type
    OAL - Flanged lug ANSI type
    T   - Disc Material PVC-C and PP-H
    W   - Actuation type
          FM, LM, RM,CE, CP
    Y   - Size
          Metric (mm)
          050 063 075 090 110 140 160 225 280 315 355 400
          Imperial (inches)
          112, 200, 212 300 400 500 600 800 810 812 814 816
    Z   - Gasket type
    E   - EPDM
[7] FX (X)(T)(Y) (Z) (W)
    X   - End connection type
    O   - Flanged ISO type
    OA  - Flanged ANSI type
    OL  - Flanged lug ISO type
    OAL - Flanged lug ANSI type
    W   - Actuation type
          FM, LM, RM,CE, CP
    Y   - Size
          Metric
          (mm) 050 063 075 090 110 140 160 225 280 315 355 400
          Imperial (inches)
          112,200,212 300 400 500 600 800 810 812 814 816
    Z   - Gasket type
    E   - EPDM
    T   - Disc Material PP-H
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
      documentation shipped with the product are Certified.


 
FIVALCO GLOBAL LTD 
8605 Santa Monica Blvd, #30327
West Hollywood, CA 90069 
United States 
852 21 159 878


Facility : Tianjin, China

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Strainer[G]
F73Y25 4" - 24" CLD 23 MLTPL

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

Valves[G]
3288-L-200-FLA 20", 24" CLD 23 MLTPL
3288-L-250-FLA 14", 16", 18" CLD 23 MLTPL
3288-LI-300-FG 4" - 12" CLD 23 MLTPL
3288-LI-300-FLA 4" - 12" CLD 23 MLTPL
3288-LI-300-FM 4" - 12" CLD 23 MLTPL
3299-L-200-FLA 20", 24" CLD 23 MLTPL
3299-L-250-FLA 14", 16", 18" CLD 23 MLTPL
3299-LI-300-FG 4" - 12" CLD 23 MLTPL
3299-LI-300-FLA 4" - 12" CLD 23 MLTPL
3299-LI-300-FM 4" - 12" CLD 23 MLTPL
F1125 4" - 24" CLD 23 MLTPL
F1225 4" - 24" CLD 23 MLTPL
F13A-150 4" - 24" CLD 23 MLTPL
F13E-150 8" - 48" CLD 23 MLTPL
F51DD-150 4" - 24" CLD 23 MLTPL

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



 
Flo Fab 
860 Industrial Boulevard
Bois-Des-Filion, QC J6Z 4V7 
Canada 
450-621-2995
Visit this company's website


Facility : Bois-Des-Filion, Québec, Canada

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Pumps[G]
Flo Fab (D-PSM16-2-150) Duplex Booster 2" - 8" CLD 23 MLTPL
Flo Fab (D-PSM32-2.5-150) Duplex Booster 3" - 10" CLD 23 MLTPL
Flo Fab (S-PSM16-2-150) Simplex Booster 2" - 8" CLD 23 MLTPL
Flo Fab (S-PSM32-2.5-150) Simplex Booster 3" - 10" CLD 23 MLTPL
Flo Fab (T-PSM16-2-150) Triplex Booster 2" - 8" CLD 23 MLTPL
Flo Fab (T-PSM32-2.5-150) Triplex Booster 3" - 10" CLD 23 MLTPL

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



 
Flomatic Corporation 
15 Pruyn's Island Drive
Glens Falls, NY 12801-4421 
United States 
518-761-9797
Visit this company's website


Facility : D'Opaglio (NO), Italy

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Backflow Preventers[G]
GF8080E 3/4" CLD 23 MLTPL
GF8081E 1" CLD 23 MLTPL
GF8089E 1/2" CLD 23 MLTPL

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



 
Flomatic Corporation 
15 Pruyns Island Drive
Glens Falls, NY 12801 
United States 
86 22 2866 9785


Facility : Tianjin, China

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Valves[G]
AWWA C504 Butterfly Valve:Model 45 (Azure®) 4" - 72" CLD 23 MLTPL

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



 
Flowserve 
Av. Fuentemar 26-28
Coslada, Madrid 
28823 
Spain 
34 648 023 038
Visit this company's website


Facility : Madrid, Spain

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Other[1]
FLEX 6300 Energy Recovery Device[2] 3" CLD 23 MLTPL
FLEX 8600 Energy Recovery Device[3] 4" CLD 23 MLTPL

[1] Product functions as an energy recovery device for use with reverse osmosis elements.
[2] Flex 6300 is Certified for a minimum flow of 816,000 L/day.
[3] Flex 8600 is Certified for a minimum flow of 1,632,000 L/day.



 
Flowserve Corporation 
5215 North O'Connor Boulevard
Suite 2300 
Irving, TX 75039 
United States 
972-443-6500


Facility : Taneytown, MD

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Submersible Motors
Flowserve (Byron Jackson) Submersible Motors (Mechanical Sealed)[4] [G] 8" - 21" CLD 23 MLTPL

[4] Certified for a minimum daily flow of 150,000 L.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

Submersible Pump Cable [G]
Flowserve (Byron Jackson) Submersible Cables [4] [7] CLD 23 MLTPL

[4] Certified for a minimum daily flow of 150,000 L.
[7] 600 Volt: 1 AWG, 1/0 AWG, 2 AWG, 2/0 AWG, 3/0 AWG, 4 AWG, 4/0 AWG, 250 MCM, 350 MCM, 500
    MCM
    5000 Volt: 1 AWG, 1/0 AWG, 2 AWG, 2/0 AWG, 3/0 AWG, 4 AWG, 4/0 AWG
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



Facility : Hastings, NE

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Submersible Pumps - Pump/Motor Units[3] [4] [G]
Flowserve (Byron Jackson) Submersible Cables[7] [8] [6] CLD 23 MLTPL

[3] Only products bearing the NSF Mark on the product, product packaging, and/or
    documentation shipped with the product are Certified.
[4] Certified for a minimum daily flow of 150,000 L. Pumps with bronze cases are not
    Certified.
[5] [v][w][x][y]-[z]
       v - Size of pump in inches (5"-52")
       w - Impeller type (blank, C, E)
       x - Pump model (B, G, H, HQ, J, K, KX, L, LQ, M, MQ, N, P, Q, TM)
       y - Impeller design (blank, F, H, L, M, X, Y, Z)
       z - Number of stages 
[6] Certified for a minimum daily flow of 150,000 L.
[7] 600 Volt: 1 AWG, 1/0 AWG, 2 AWG, 2/0 AWG, 3/0 AWG, 4 AWG, 4/0 AWG, 250 MCM, 350 MCM, 500
    MCM
[8] 5000 Volt: 1 AWG, 1/0 AWG, 2 AWG, 2/0 AWG, 3/0 AWG, 4 AWG, 4/0 AWG
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



Facility : Chesapeake, VA

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Pumps[1] [2] [G]
Chesapeake Mark 3 ANSI Overhung Pumps, [A]K[B]x[C][D]-[E][F][G][3] 1 1/2" x 1"-10" x 8" CLD 23 MLTPL

[1] Certified for water end uses only. Certification not requested for chemical service.
[2] Only products bearing the NSF Mark on the product, product packaging, and/or
    documentation shipped with the product are Certified.
[3] [A] Bearing frame size (group size in Flowserve terms)
        1, 2, or 3
    [B] Suction flange size (NB ANSI flange)
        1.5, 2, 3, 4, 6, 8, or 10
    [C] Discharge flange size (NB ANSI flange)
        1, 1.5, 2, 3, 4, 6, or 8
    [D] Special versions of Mark 3 products
        Blank or no letter - standard pump
        LF - Lo-Flo
    [E] Maximum size of impeller (inch nominal)
        4, 62 (6.2), 82 (8.2), 10, 13, 14, 16, or 17
    [F] Revised hydraulic marker
        () - Blank signifies no change to the original hydraulics of Mark 3 product
        A  - Significant hydraulic change
        H  - High Flow hydraulic design
        HH - High Head hydraulic design
    [G] Impeller Design
        RV - Reverse Vane impeller design
        OP - Open impeller design
[4] [S] Is an optional designation that identifies tounge and groove casing 
        rings fitted.  Only pumps with coated interiors are Certified.
    [X] Refers to the nominal discharge diameter in inches and may be 2.5, 
        3, 4, 5, 6, 8, 10 or 12.
    [Y] Refers to the nominal impeller diameter in inches and may be 9, 10, 
        11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 23, or 25.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



Fluid Handling, LLC, a sub. of Xylem, Inc. dba Bell & Gossett, Standard Xchange 
175 Standard Parkway
Cheektowaga, NY 14227 
United States 
800-447-7700 
Visit this company's website


Facility : Cheektowaga, NY

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Heat Exchanger[1] [G]
PXXX Plate and Frame Heat Exchanger[2] 1" - 18" C. HOT MLTPL
PXXXDW Plate and Frame Heat Exchanger[3] 1" - 18" C. HOT MLTPL

[1] Only products bearing the NSF Mark on the product, product packaging, and/or
    documentation shipped with the product are Certified.
[2] XXX (P Series Model #): 4, 7, 8, 14, 17, 19, 20, 21, 22, 31, 37, 41, 42, 43, 45, 47, 55,
    62, 64, 65, 81, 86, 100, 110, 113, 121, 130, 145, 152, 188, 201, 210, 220, 251, 315, 352
[3] XXX (P DW Series Model #): 4, 7, 8, 14, 19, 20, 21, 41, 43, 47, 62, 64, 65, 81, 86, 100,
    121, 130, 188
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



 
Fluidos Industriales Mexicanos, S.A. de C.V. 
Av. Tecnologico # 483
Cienega de Flores 
Nuevo Léon 65550 
Mexico 
52 818 384 7310
Visit this company's website


Facility : TKP External Plant China

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Service Saddles
IBFD2A 2" IPS 2" CLD 23 PE
IBFD2E 2" IPS 2" CLD 23 PE
IBFD3A 3" IPS 3" CLD 23 PE
IBFD3E 3" IPS 3" CLD 23 PE
IBFD4A 4" IPS 4" CLD 23 PE
IBFD4E 4" IPS 4" CLD 23 PE
IBFD6A 6" IPS 6" CLD 23 PE
IBFD6E 6" IPS 6" CLD 23 PE
IBFD8A 8" IPS 8" CLD 23 PE
IBFD8E 8" IPS 8" CLD 23 PE
IBFFL10A 10" IPS 10" CLD 23 PE
IBFFL10B 10" IPS 10" CLD 23 PE
IBFFL10E 10" IPS 10" CLD 23 PE
IBFFL12A 12" IPS 12" CLD 23 PE
IBFFL12B 12" IPS 12" CLD 23 PE
IBFFL12E 12" IPS 12" CLD 23 PE
IBFFL14A 14" IPS 14" CLD 23 PE
IBFFL14B 14" IPS 14" CLD 23 PE
IBFFL16A 16" IPS 16" CLD 23 PE
IBFFL16B 16" IPS 16" CLD 23 PE
IBFFL18A 18" IPS 18" CLD 23 PE
IBFFL18B 18" IPS 18" CLD 23 PE
IBFFL20A 20" IPS 20" CLD 23 PE
IBFFL20B 20" IPS 20" CLD 23 PE
IBFFL24A 24" IPS 24" CLD 23 PE
IBFFL24B 24" IPS 24" CLD 23 PE
IBFFL28B 28" IPS 28" CLD 23 PE
IBFFL30B 30" IPS 30" CLD 23 PE
IBFFL32B 32" IPS 32" CLD 23 PE
IBFFL36B 36" IPS 36" CLD 23 PE
IBFFL3A 3" IPS 3" CLD 23 PE
IBFFL3B 3" IPS 3" CLD 23 PE
IBFFL3E 3" IPS 3" CLD 23 PE
IBFFL4A 4" IPS 4" CLD 23 PE
IBFFL4B 4" IPS 4" CLD 23 PE
IBFFL4E 4" IPS 4" CLD 23 PE
IBFFL6A 6" IPS 6" CLD 23 PE
IBFFL6B 6" IPS 6" CLD 23 PE
IBFFL6E 6" IPS 6" CLD 23 PE
IBFFL8A 8" IPS 8" CLD 23 PE
IBFFL8B 8" IPS 8" CLD 23 PE
IBFFL8E 8" IPS 8" CLD 23 PE
IBFFS42B 42" IPS 42" CLD 23 PE
IBFFS48B 48" IPS 48" CLD 23 PE
IBFL42A 2" IPS 2" CLD 23 PE
IBFL42E 2" IPS 2" CLD 23 PE
IBFL43A 3" IPS 3" CLD 23 PE
IBFL43E 3" IPS 3" CLD 23 PE
IBFL44A 4" IPS 4" CLD 23 PE
IBFL44E 4" IPS 4" CLD 23 PE
IBFL46A 6" IPS 6" CLD 23 PE
IBFL46E 6" IPS 6" CLD 23 PE
IBFL48A 8" IPS 8" CLD 23 PE
IBFL48E 8" IPS 8" CLD 23 PE
IBFL92A 2" IPS 2" CLD 23 PE
IBFL92E 2" IPS 2" CLD 23 PE
IBFL93A 3" IPS 3" CLD 23 PE
IBFL93E 3" IPS 3" CLD 23 PE
IBFL94A 4" IPS 4" CLD 23 PE
IBFL94E 4" IPS 4" CLD 23 PE
IBFL96A 6" IPS 6" CLD 23 PE
IBFL96E 6" IPS 6" CLD 23 PE
IBFL98A 8" IPS 8" CLD 23 PE
IBFL98E 8" IPS 8" CLD 23 PE
IBFR32A 3" x 2" IPS 3" x 2" CLD 23 PE
IBFR32E 3" x 2" IPS 3" x 2" CLD 23 PE
IBFR42A 4" x 2" IPS 4" x 2" CLD 23 PE
IBFR42E 4" x 2" IPS 4" x 2" CLD 23 PE
IBFR43A 4" x 3" IPS 4" x 3" CLD 23 PE
IBFR43E 4" x 3" IPS 4" x 3" CLD 23 PE
IBFR62A 6" x 2" IPS 6" x 2" CLD 23 PE
IBFR62E 6" x 2" IPS 6" x 2" CLD 23 PE
IBFR63A 6" x 3" IPS 6" x 3" CLD 23 PE
IBFR63E 6" x 3" IPS 6" x 3" CLD 23 PE
IBFR64A 6" x 4" IPS 6" x 4" CLD 23 PE
IBFR64E 6" x 4" IPS 6" x 4" CLD 23 PE
IBFR84A 8" x 4" IPS 8" x 4" CLD 23 PE
IBFR84E 8" x 4" IPS 8" x 4" CLD 23 PE
IBFR86A 8" x 6" IPS 8" x 6" CLD 23 PE
IBFR86E 8" x 6" IPS 8" x 6" CLD 23 PE
IBFT2A 2" IPS 2" CLD 23 PE
IBFT2E 2" IPS 2" CLD 23 PE
IBFT3A 3" IPS 3" CLD 23 PE
IBFT3E 3" IPS 3" CLD 23 PE
IBFT4A 4" IPS 4" CLD 23 PE
IBFT4E 4" IPS 4" CLD 23 PE
IBFT6A 6" IPS 6" CLD 23 PE
IBFT6E 6" IPS 6" CLD 23 PE
IBFT8A 8" IPS 8" CLD 23 PE
IBFT8E 8" IPS 8" CLD 23 PE
IEFCL10A 10" IPS 10" CLD 23 PE
IEFCL112A 1.5" IPS 1 1/2" CLD 23 PE
IEFCL114A 1.25" IPS 1 1/4" CLD 23 PE
IEFCL12A 0.5" IPS 1/2" CLD 23 PE
IEFCL12A 12" IPS 12" CLD 23 PE
IEFCL14A 14" IPS 14" CLD 23 PE
IEFCL16A 16" IPS 16" CLD 23 PE
IEFCL1A 1" IPS 1" CLD 23 PE
IEFCL2A 2" IPS 2" CLD 23 PE
IEFCL34A 0.75" IPS 3/4" CLD 23 PE
IEFCL3A 3" IPS 3" CLD 23 PE
IEFCL4A 4" IPS 4" CLD 23 PE
IEFCL6A 6" IPS 6" CLD 23 PE
IEFCL8A 8" IPS 8" CLD 23 PE



 
Fluytec S.A. 
Camino de Sakoni, 18
Erandio 
48950 Vizcaya 
Spain 
34 94 467 61 50
Visit this company's website


Facility : Abanto-Zierbena, Spain

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Filtration Devices/Components[1] [2] [G]
JJJJ FTAUR-PPPP PRFV/ PNYY 50 cm x 200 cm D. HOT MLTPL
MM B FTP-L PNYY 20 cm x 150 cm D. HOT MLTPL
MM FTC-L PNYY 25 cm x 135 cm D. HOT MLTPL
MM HF FTP-L PNYY HTAL/VTAL [BE] 25 cm x 200 cm D. HOT MLTPL
NNN FTP-L B PNYY HTAL/VTAL [BE] 70 cm x 250 cm D. HOT MLTPL
NNN FTP-L BL XL [IS] PNYY [BE] 70 cm x 300 cm D. HOT MLTPL
v-UF KK PNYY 50 cm x 300 cm D. HOT MLTPL
NNN FTP-L C PNYY [BE] 70 cm x 350 cm D. HOT MLTPL
NNN FTP-L EX PNYY [BE] 70 cm x 250 cm D. HOT MLTPL
NNN FTP-L FL PNYY HTAL/VTAL [BE] 25 cm x 200 cm D. HOT MLTPL
NNN FTP-L SFL [IS] PNYY HTAL/VTAL [BE] 70 cm x 250 cm D. HOT MLTPL
SMP XXXD LZZZZ PNYY [PTFE] 2.5 cm x 30 cm D. HOT MLTPL
i-UF KK PNYY 50 cm x 300 cm D. HOT MLTPL
NNN FTP-L BL [IS] PNYY [BE] 25 cm x 150 cm D. HOT MLTPL

[1] NNN FTP-L BL [IS] PNYY [BE] and MM FTC-L PNYY are certified for a minimum flow of
    360,000 liters per day.
    NNN FTP-L BL XL [IS] PNYY [BE], NNN FTP-L SFL [IS] PNYY HTAL/VTAL [BE], NNN FTP-L B PNYY
    HTAL/VTAL [BE], MM B FTP-L PNYY, NNN FTP-L FL PNYY HTAL/VTAL [BE], NNN FTP-L EX PNYY
    [BE], and NNN FTP-L C PNYY [BE] are certified for a minimum flow of 2,800,000 liters per
    day.
    MM HF FTP-L PNYY HTAL/VTAL [BE] is certified for a minimum flow of 2,160,000 liters per
    day.
    SMP XXXD LZZZZ PNYY [PTFE] and i-UF KK PNYY are certified for a minimum flow of 360,000
    liters per day.
    JJJJ FTAUR-PPPP PRFV/ PNYY is certified for a minimum flow of 3,600,000 liters per day.
    
    All models require a pre-service flush with tap water at 7 gpm for a half hour.
    
    Certified for municipal use.
    
    The SMP "static mixers" are sold individually and/or as an optional add on for FTP- BL,
    FTP- BL XL, FTP- SFL, FTP- B, B FTP, FTC, FTP- FL,HF
    FTP, FTP-EX, FTP-C, FTAUR, i-UF or v-UF filter housings.
[2] Explanation of code/prefix on trade names:
    NNN: number of cartridges (7–470)
    MM: number of bags or baskets (5 – 52)
    KK: number of UF modules (5-60)
    L: length of the cartridges (30”-70” in multiples of 10”)
    BL: cartridges filter boltless opening
    BL XL: cartridges filter boltless opening extra length
    B: bags system (cartridges connection system)
    SFL: single flange (cartridges connection system)
    FTC: basket system (cartridges connection system)
    FL: double flange (cartridges connection system)
    HF: high flow (cartridges connection system)
    EX: removable filtering element (cartridges connection system)
    C: bell cartridge filter (cartridges connection system)
    FTAUR: self-cleaning filter (cartridges connection system)
    XXX: diameter of mixer (250–2000mm)
    ZZZZ: length of the mixer
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
      documentation shipped with the product are Certified.


 
FOTEK CONTROLS CO., LTD. 
8F No. 477, Sec. 6, Yen Ping N. Rd.
Taipei 
111 
Taiwan 
886 2 28151106 X529


Facility : Taipei, Taiwan

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Switches/Sensors [G]
FOTEK / KI Series Inserted Type Paddle Flow Sensor & Flow Meter[1] 1" - 24" CLD 23 MLTPL

[1] Nomenclature:KIA-B-C-D-E
    A - Type
        M - Flow rate meter with transmitter
        P - Flow rate meter & Flow total meter with RS-485
        C - Battery type flow meter
        B - Flow meter with transmitter
        W - Flow sensor
    
    B - Material of inserting tube (PVC)
    
    C - Length of inserting tube
        S - for Pipe 1" – 4"
        L - for Pipe 6" – 24"
    
    D - Function option
        Non - Standard type
        RS  - KIP & KIB types with MODBUS RTU
        A   – KIM & KIB types with transmitter ( 4~ 20 mA)
    
    E – Connection method
        Non - KIC series
        2m  - KIW & KIP & KIM types with lead wire 2m
        MM  – KIW type with DIN 43650A micro mini
        M12 – KIP or KIM type with connector M12
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

Water Meters [G]
FOTEK / AT Series Paddle Flow Sensor & Flow Meter[2] 15 - 100 mm CLD 23 MLTPL
FOTEK / KT Series Paddle Flow Sensor & Flow Meter[2] 15 - 100 mm CLD 23 MLTPL

[2] Nomenclature of KT Series Paddle Flow Sensor & Flow Meter:KTA-B-C-D-E-F
    Nomenclature of AT Series Paddle Flow Sensor & Flow Meter:ATA-B-C-D-E-F
    
    A - Type
        M - Flow rate meter with transmitter
        P - Flow rate meter & Flow total meter
        S - Flow rate meter
        W - Flow sensor
        C - Battery type LCD Flow meter
    
    B - Pipe size
        15  - DN 15 (1/2")
        20  - DN 20 (3/4")
        25  - DN 25 (1")
        40  - DN 40 (1 1/2")
        50  - DN 50 (2")
        65  - DN 65 (2 1/2")
        80  - DN 80 (3")
        100 - DN 100 (4")
    
    C - Function option
        Non - Standard type
        RS  - KTP type with MODBUS communication
        A   - KTM & KTW types with transmitter (4 - 20 mA)
        V   - KTM & KTW types with transmitter (0 – 5 V)
        P   - KTW type pulse output only
    
    D - Material of union (PVC)
    
    E – Pipe standard
        DIN  - DIN standard
        JIS  - JIS standard
        ANSI – ANSI standard
    
    F – Connection method
        Non - Lear wire 3m
        5m  - Lear wire 5m
        M12 - Connector M12
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



 
Franklin Water Treatment Canada, Inc. 
Unit 5 - 200 Discovery Place
Winnipeg, MB R2R 0P7 
Canada 
204-786-1604


Facility : # 3 China

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Reverse Osmosis Element[1] [2] [3]
FWME2521RO-ULP 2 1/2" x 21" CLD 23 MLTPL
FWME2540RO-ULP 2 1/2" x 40" CLD 23 MLTPL
FWME4021RO-XLP 4" x 21" CLD 23 MLTPL
FWME4040RO-BW 4" x 40" CLD 23 MLTPL
FWME4040RO-XLP 4" x 40" CLD 23 MLTPL
FWME8040RO-BW 8" x 40" CLD 23 MLTPL
FWME8040RO-XLP 8" x 40" CLD 23 MLTPL

[1] Size is expressed as Diameter x length.
[2] FWME4040RO-BW models are certified for a minimum daily flow of 2,400 gallons.				
    FWME8040RO-BW models are certified for a minimum daily flow of 10,000 gallons.				
    FWME2521RO-ULP models are certified for a minimum daily flow of 400 gallons.				
    FWME2540RO-ULP model is certified for a minimum daily flow of 750 gallons.				
    FWME4021RO-XLP models are certified for a minimum daily flow of 950 gallons.				
    FWME4040RO-XLP model is certified for a minimum daily flow of 2,600 gallons.				
    FWME8040RO-XLP models are certified for a minimum daily flow of 11,000 gallons.
[3] All models 2.5" in diameter require a 2 gpm flush for 24 hours using tap water.				
    All models 4" in diameter require a 4 gpm flush for 24 hours using tap water.				
    All models 8" in diameter require a 15 gpm flush for 24 hours using tap water.



 
Fratelli Pettinaroli S.p.A. 
Via Pianelli 38
S. Maurizio D’Opaglio (NO) 
28017 
Italy 
39 032296217


Facility : # 1 China

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Valves[G]
BF3SE-G 5" - 24" CLD 23 MLTPL
BF3SE-L 2" - 6" CLD 23 MLTPL
BF4SE-G 5" - 20" CLD 23 MLTPL
BF4SE-L 2" - 6" CLD 23 MLTPL

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



 
Fratelli Pettinaroli Spa 
Via Pianelli 38
28017 S. Maurizio D' Opaglio (NO) 
Novara 
Italy 
39 032 296 217
Visit this company's website


Facility : S. Maurizio D'Opaglio (NO), Italy

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Valves
F101ASG Kit[1] [G] 3/4" D. HOT MLTPL
T-82MFFG Mini Ball Valve[G] 1/4" D. HOT MLTPL
T-82MFMG Mini Ball Valve[G] 1/8" - 1/4" D. HOT MLTPL
T100FBG[G] 1/2" - 2" C. HOT MLTPL
T102FG/5R[G] ¾" x ½", ¾" x ¾" C. HOT MLTPL
T90LF[4] [G] 1/2" - 3/4" D. HOT MLTPL

[1] The F101ASG Kit include tankless water heater inlet valves (F101AG) and tankless water
    heater outlet valves (F101SG).
[2] The T101ASG and S101ASG Kits include tankless water heater inlet valves (T101AG/S101AG)
    and tankless water heater outlet valves (T101SG/S101SG).
[3] The T101CASG and S101CASG Kits include tankless water heater inlet valves
    (T101CAG/S101CAG) and tankless water heater outlet valve (T101CSG/S101CSG).
[4] T90LF 1/2" is a single valve (not a part of a kit).
[5] The P101ASG Kit includes tankless water heater inlet valves (P101AG) and tankless water
    heater outlet valves (P101SG).
[6] The P101CASG Kit includes tankless water heater inlet valves (P101CAG) and tankless
    water heater outlet valves (P101CSG).
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

Valves and Related Fittings[G]
0TB00CKJO 1/2" 3/4" C. HOT MLTPL

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



 
Freudenberg Far Eastern Spunweb Co. Ltd. 
No. 38, Lun Din
Shi Hai Village, Tayuan 
Taoyuan 337 
Taiwan 
886 3 384 6121
Visit this company's website


Facility : Taoyuan, Taiwan

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Point-of-Entry
Filtura®Media 2H17-xxx-72A2 (LDy72zzTWE)[1] [2] [3] [4] CLD 23 PET
Filtura®Media 2H17-xxx-73A2 (LDy73zzTWPL)[1] [2] [3] [4] CLD 23 PET

[1] xxx stands for product weight range.
[2] y
    H - product weight greater than 100 g      
    Blank - stands the product weight less than 100g
[3] zz stands for product weight range.
[4] Certified for point of entry (POE) filtration devices at a maximum surface area to
    volume ratio of 10 in²/L.



 
Fujian Huamo Environmental Protection Co., Ltd. 
No. 8, Zone E, Bangde Industrial Park
Taocheng Town, Yongchun County 
Quanzhou, Fujian 362600 
China 
(0595) 23967275


Facility : Fujian, China

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Reverse Osmosis Element [1] [G]
BF22-4040[1] 3.9 x 40 in CLD 23 MLTPL
BF22-4040FR[1] 3.9 x 40 in CLD 23 MLTPL
BF22-8040[3] 7.9 x 40 in CLD 23 MLTPL
BF22-8040FR[3] 7.9 x 40 in CLD 23 MLTPL
BF31-4040[1] 3.9 x 40 in CLD 23 MLTPL
BF31-8040[3] 7.9 x 40 in CLD 23 MLTPL
BF4040-NF[1] 3.9 x 40 in CLD 23 MLTPL
BF4040-SOFT[1] 3.9 x 40 in CLD 23 MLTPL
BF4040-SW[1] 3.9 x 40 in CLD 23 MLTPL
BF8040-NF[3] 7.9 x 40 in CLD 23 MLTPL
BF8040-SOFT[3] 7.9 x 40 in CLD 23 MLTPL
BF8040-SW[3] 7.9 x 40 in CLD 23 MLTPL
FRFT-10040[4] 9.9 x 40 in CLD 23 MLTPL
FRFT-4040[1] 3.9 x 40 in CLD 23 MLTPL
FRFT-6040[2] 6 x 40 in CLD 23 MLTPL
FRFT-8040[3] 7.9 x 40 in CLD 23 MLTPL
FRHM-10040[4] 9.9 x 40 in CLD 23 MLTPL
FRHM-4040[1] 3.9 x 40 in CLD 23 MLTPL
FRHM-6040[2] 6 x 40 in CLD 23 MLTPL
FRHM-8040[3] 7.9 x 40 in CLD 23 MLTPL
FRHS-10040[4] 9.9 x 40 in CLD 23 MLTPL
FRROOR-10040[4] 9.9 x 40 in CLD 23 MLTPL
HORFT-10040[4] 9.9 x 40 in CLD 23 MLTPL
HORFT-4040[1] 3.9 x 40 in CLD 23 MLTPL
HORFT-6040[2] 6 x 40 in CLD 23 MLTPL
HORFT-8040[3] 7.9 x 40 in CLD 23 MLTPL
LPFT-10040[4] 9.9 x 40 in CLD 23 MLTPL
LPFT-4040[1] 3.9 x 40 in CLD 23 MLTPL
LPFT-6040[2] 6 x 40 in CLD 23 MLTPL
LPFT-8040[3] 7.9 x 40 in CLD 23 MLTPL
MR-BW-4040-FR[1] 3.9 x 40 in CLD 23 MLTPL
MR-BW-8040-FR[3] 7.9 x 40 in CLD 23 MLTPL
MR-NF-8040[3] 7.9 x 40 in CLD 23 MLTPL
NFFT-10040[4] 9.9 x 40 in CLD 23 MLTPL
NFFT-4040[1] 3.9 x 40 in CLD 23 MLTPL
NFFT-6040[2] 6 x 40 in CLD 23 MLTPL
NFFT-8040[3] 7.9 x 40 in CLD 23 MLTPL
NFHM-4040[1] 3.9 x 40 in CLD 23 MLTPL
NFHM-6040[2] 6 x 40 in CLD 23 MLTPL
NFHM-8040[3] 7.9 x 40 in CLD 23 MLTPL
NFHM10040[4] 9.9 x 40 in CLD 23 MLTPL
RUNMO-BW-4040-FR[1] 3.9 x 40 in CLD 23 MLTPL
RUNMO-BW-8040-FR[3] 7.9 x 40 in CLD 23 MLTPL
RUNMO-NF-8040[3] 7.9 x 40 in CLD 23 MLTPL
SWFT-10040[4] 9.9 x 40 in CLD 23 MLTPL
SWFT-4040[1] 3.9 x 40 in CLD 23 MLTPL
SWFT-6040[2] 6 x 40 in CLD 23 MLTPL
SWFT-8040[3] 7.9 x 40 in CLD 23 MLTPL
TF22-4040[1] 3.9 x 40 in CLD 23 MLTPL
TF22-4040FR[1] 3.9 x 40 in CLD 23 MLTPL
TF22-8040[3] 7.9 x 40 in CLD 23 MLTPL
TF22-8040FR[3] 7.9 x 40 in CLD 23 MLTPL
TF31-4040[1] 3.9 x 40 in CLD 23 MLTPL
TF31-8040[3] 7.9 x 40 in CLD 23 MLTPL
TF4040-NF[1] 3.9 x 40 in CLD 23 MLTPL
TF4040-SOFT[1] 3.9 x 40 in CLD 23 MLTPL
TF4040-SW[1] 3.9 x 40 in CLD 23 MLTPL
TF8040-NF[3] 7.9 x 40 in CLD 23 MLTPL
TF8040-SOFT[3] 7.9 x 40 in CLD 23 MLTPL
TF8040-SW[3] 7.9 x 40 in CLD 23 MLTPL
ULPFT-10040[4] 9.9 x 40 in CLD 23 MLTPL
ULPFT-4040[1] 3.9 x 40 in CLD 23 MLTPL
ULPFT-6040[2] 6 x 40 in CLD 23 MLTPL
ULPFT-8040[3] 7.9 x 40 in CLD 23 MLTPL
XLPFT-10040[4] 9.9 x 40 in CLD 23 MLTPL
XLPFT-4040[1] 3.9 x 40 in CLD 23 MLTPL
XLPFT-6040[2] 6 x 40 in CLD 23 MLTPL
XLPFT-8040[3] 7.9 x 40 in CLD 23 MLTPL

[1] Model(s) are certified for a minimum daily permeate generation of 17,280 gallons for use
    in public water treatment facilities.  Model(s) require a pre-service flush at 12
    gallons per minute (GPM) for 10 hours using tap water.
[1] Model(s) are certified for a minimum daily permeate generation of 17,280 gallons for use
    in public water treatment facilities.  Model(s) require a pre-service flush at 12
    gallons per minute (GPM) for 10 hours using tap water.
[2] Model(s) are certified for a minimum daily permeate generation of 27,200 gallons for use
    in public water treatment facilities. Model(s) require a pre-service flush at 30 gallons
    per minute (GPM) for 10 hours using tap water.
[3] Model(s) are certified for a minimum daily permeate generation of 59,500 gallons for use
    in public water treatment facilities. Model(s) require a pre-service flush at 70 gallons
    per minute (GPM) for 10 hours using tap water.
[4] Model(s) are certified for a minimum daily permeate generation of 82,422 gallons for use
    in public water treatment facilities. Model(s) require a pre-service flush at 120
    gallons per minute (GPM) for 10 hours using deionized water.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



 
G-Metal Valves Corp. 
225 South Lake Avenue
Suite 300 
Pasadena, CA 91101 
United States 
626-638-9555
Visit this company's website


Facility : Tianjin, China

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Valves[G]
Center Line-Type Butterfly Valve-DLIX01-N1 2" - 24" CLD 23 MLTPL
Center Line-Type Butterfly Valve-DLIX01-N2 2" - 24" CLD 23 MLTPL
Center Line-Type Butterfly Valve-DWIX01-N1 2" - 24" CLD 23 MLTPL
Center Line-Type Butterfly Valve-DWIX01-N2 2" - 24" CLD 23 MLTPL
Double Eccentric Rubber Sealing Flange Butterfly Valve DEIX03-N1 8" - 48" CLD 23 MLTPL
Double flange Butterfly Valve-DDIX01-N1 3" - 24" CLD 23 MLTPL
Dual-plate Wafer Check Valve-ZHRIWA-N 2" - 24" CLD 23 MLTPL

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



 
Georg Fischer Central Plastics LLC 
39605 Independence
Shawnee, OK 74801 
United States 
800-654-3872 
405-273-6302
Visit this company's website


Facility : Shawnee, OK

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Service Saddles [G]
+GF+ [1] CLD 23 MLTPL

[1] Certification includes the following products and sizes:
    Conventional Branch Saddle (Large Rectangular Base): 2" - 48" main x 1/2" - 24" outlet
    Conventional Branch Saddle (Round Base): 2" - 48" main x 1/2" - 24" outlet
    Conventional Branch Saddle (Rectangular Base): 2" - 48" main x 1/2" - 24" outlet
    Electrofusion Branch Saddle (IPS Butt outlet): 6" - 48" main x 6" - 8" outlet
    Electrofusion Branch Saddle (Under-Clamp Type Wide-Body): 2" - 48" main x 2" - 8" outlet
    Electrofusion Transition Saddle: 2" - 12" main x 1/2" - 2" threaded outlet
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

Tapping Tee [G]
+GF+ [2] CLD 23 MLTPL

[2] Certification includes the following products and sizes:
    Conventional Tapping Tee: 1 1/4" - 12" main x 1/2" - 1 1/4" outlet
    Conventional High Volume (HV) Tapping Tee: 2" - 12" main x 1 1/4" - 2" outlet  
    Electrofusion High Volume (HV) Tapping Tee: 2" - 12" main x 1 1/4" - 2" outlet
    Electrofusion Tapping Tee: 1 1/4" - 12" main x 1/2" - 1 1/4" outlet
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



 
Georg Fischer JRG AG 
Hauptstrasse 130
4450 Sissach 
Switzerland 
41 61 975 2222


Facility : Sissach, Switzerland

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Valves[G]
Circulation valve JRG LegioTherm 2T LF- 9920.015 - DN15 1/2" D. HOT MLTPL
Circulation valve JRG LegioTherm 2T LF- 9920.020 - DN20 1/2" D. HOT MLTPL
Circulation valve JRGLegioTherm 2T LF-9910.015 - DN15 1/2" D. HOT MLTPL
Circulation valve JRGLegioTherm 2T LF-9910.020 - DN20 3/4" D. HOT MLTPL
Circulation valve JRGLegioTherm 2T LF-9910.025 - DN25 1" D. HOT MLTPL

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



 
Georg Fischer Piping Systems Ltd. 
Ebnatstrasse 111
8201 Schaffhausen 
Switzerland 
41 52 631 11 11
Visit this company's website


Facility : Schaffhausen, Switzerland

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Service Saddles [G]
ELGEF Plus Branch saddle outlet PE100 SDR 11 110x90mm–250x125mm CLD 23 MLTPL
ELGEF Plus Branch saddle top load PE100 SDR11 280x90mm–630x125 mm CLD 23 MLTPL
ELGEF Plus Electrofusion saddle PE100 SDR11[1] 63 mm - 400 mm CLD 23 PE
ELGEF Plus Electrofusion saddle PE100 SDR11 63mmx63mm–400mmx63mm CLD 23 MLTPL
ELGEF Plus Tapping saddle Monobloc version PE100 SDR11 (Large Sizes) 63mmx20mm–160mmx63mm CLD 23 MLTPL
ELGEF Plus Tapping saddle Monobloc version PE100 SDR11 (Small Sizes) 40mmx20mm–50mmx32mm CLD 23 MLTPL

[1] Covers the following service saddles
    193137037 - 63mm x 63mm
    193137047 - 75mm x 63mm
    193137057 - 90mm x 63mm
    193137067 - 110mm x 63mm
    193137077 - 125mm x 63mm
    193137087 - 140mm x 63mm
    193137097 - 160mm x 63mm
    193137107 - 180mm x 63mm
    193137117 - 200mm x 63mm
    193137127 - 225mm x 63mm
    193137137 - 250mm x 63mm
    193137147 - 280mm x 63mm
    193137157 - 315mm x 63mm
    193137167 - 355mm x 63mm
    193137177 - 400mm x 63mm
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

	
        

Facility : Seewis-Pardisla, Switzerland

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Valves [G]
+GF+ 104 CPVC Ball Valve (Female NPT or Socket US) 3/8" - 4" C. HOT MLTPL
+GF+ 107 CPVC Ball Valve (Female NPT or Socket US) 3/8" - 4" C. HOT MLTPL
+GF+ 133 CPVC Ball Valve (Female NPT or Socket US) 3/8" - 4" C. HOT MLTPL
+GF+ 140 PVC-C Buttefly Valvec[1] 2" - 12" D. HOT MLTPL
+GF+ 140 PVC-U Buttefly Valve[1] 2" - 12" CLD 23 MLTPL
+GF+ 141 PVC-C Buttefly Valve[1] 2" - 12" D. HOT MLTPL
+GF+ 141 PVC-U Buttefly Valve[1] 2" - 12" CLD 23 MLTPL
+GF+ 142 PVC-C Buttefly Valve[1] 2" - 12" D. HOT MLTPL
+GF+ 142 PVC-U Buttefly Valve[1] 2" - 12" CLD 23 MLTPL
+GF+ 233 CPVC Ball Valve (Female NPT or Socket US) 3/8" - 4" C. HOT MLTPL
+GF+ 240 PVC-C Buttefly Valve[1] 2" - 12" D. HOT MLTPL
+GF+ 240 PVC-U Buttefly Valve[1] 2" - 12" CLD 23 MLTPL
+GF+ 241 PVC-C Buttefly Valve[1] 2" - 12" D. HOT MLTPL
+GF+ 241 PVC-U Buttefly Valve[1] 2" - 12" CLD 23 MLTPL
+GF+ 242 PVC-C Buttefly Valve[1] 2" - 12" D. HOT MLTPL
+GF+ 242 PVC-U Buttefly Valve[1] 2" - 12" CLD 23 MLTPL
+GF+ 563 PVC-C Buttefly Valve[1] 2" - 12" D. HOT MLTPL
+GF+ 563 PVC-U Buttefly Valve[1] 2" - 12" CLD 23 MLTPL
+GF+ 567 PVC-C Buttefly Valve[1] 2" - 12" D. HOT MLTPL
+GF+ 567 PVC-U Buttefly Valve[1] 2" - 12" CLD 23 MLTPL
+GF+ 568 PVC-C Buttefly Valve[1] 2" - 12" D. HOT MLTPL
+GF+ 568 PVC-U Buttefly Valve[1] 2" - 12" CLD 23 MLTPL
+GF+ 578 PVC-C Buttefly Valve[1] 2" - 12" D. HOT MLTPL
+GF+ 578 PVC-U Buttefly Valve[1] 2" - 12" CLD 23 MLTPL
+GF+ NeoFlow DN50 mm - DN150 mm CLD 23 MLTPL
+GF+107 PVC-U Ball Valve (Female NPT or Socket US) 10 mm - 50 mm CLD 23 MLTPL
+GF+130 PVC-U Ball Valve (Female NPT or Socket US) 10 mm - 50 mm CLD 23 MLTPL
+GF+133 PVC-U Ball Valve (Female NPT or Socket US) 10 mm - 50 mm CLD 23 MLTPL
+GF+134 PVC-U Ball Valve (Female NPT or Socket US) 10 mm - 50 mm CLD 23 MLTPL
+GF+135 PVC-U Ball Valve (Female NPT or Socket US) 10 mm - 50 mm CLD 23 MLTPL
+GF+230 PVC-U Ball Valve (Female NPT or Socket US) 10 mm - 50 mm CLD 23 MLTPL
+GF+233 PVC-U Ball Valve (Female NPT or Socket US) 10 mm - 50 mm CLD 23 MLTPL
+GF+234 PVC-U Ball Valve (Female NPT or Socket US) 10 mm - 50 mm CLD 23 MLTPL
+GF+235 PVC-U Ball Valve (Female NPT or Socket US) 10 mm - 50 mm CLD 23 MLTPL
+GF+546 Pro PVC-U Ball Valve 10 mm - 50 mm CLD 23 MLTPL
+GF+546 Pro PVC-U Ball Valve 3/8" - 4" C. HOT MLTPL
Butterfly Valve Type 565 2" - 12" C. HOT MLTPL

[1] Certified for equivalent metric sizes.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



 
Georg Fischer Signet LLC 
5462 N. Irwindale Avenue
Irwindale, CA 91706 
United States 
626-571-2770


Facility : Irwindale, CA

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Miscellaneous Process Devices/Components[1] [G]
MPV8T005F 1/2" CLD 23 MLTPL
MPV8T007F 3/4" CLD 23 MLTPL
MPV8T010F 1" CLD 23 MLTPL
MPV8T012F 1 1/4" CLD 23 MLTPL
MPV8T015F 1 1/2" CLD 23 MLTPL
MPV8T020F 2" CLD 23 MLTPL

[1] The "PV" miscellaneous process devices are saddles and the "MPV" miscellaneous process
    devices are tees that are used in conjunction with the Paddlewheel Flow Sensor and
    Flowmeter.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

Switches/Sensors[G]
3-2536-P0 Paddlewheel Flow Sensor 2.25" x 4.1" CLD 23 MLTPL
3-2536-P1 Paddlewheel Flow Sensor 2.25" X 5.4" CLD 23 MLTPL
3-2536-P2 Paddlewheel Flow Sensor 2.25" X 8.4" CLD 23 MLTPL
3-2536-P3 Paddlewheel Flow Sensor 2.25" X 11.7" CLD 23 MLTPL
3-2536-P4 Paddlewheel Flow Sensor 2.25" X 13.1" CLD 23 MLTPL
3-2536-P5 Paddlewheel Flow Sensor 2.25" X 16.1" CLD 23 MLTPL
3-2537-1C-P0 Paddlewheel Flowmeter 3.82" x 5.12" CLD 23 MLTPL
3-2537-1C-P1 Paddlewheel Flowmeter 3.82" x 6.73" CLD 23 MLTPL
3-2537-2C-P0 Paddlewheel Flowmeter 3.82" x 5.12" CLD 23 MLTPL
3-2537-2C-P1 Paddlewheel Flowmeter 3.82" x 6.73" CLD 23 MLTPL
3-2537-5C-P0 Paddlewheel Flowmeter 3.82" x 5.12" CLD 23 MLTPL
3-2537-5C-P1 Paddlewheel Flowmeter 3.82" x 6.73" CLD 23 MLTPL
3-2537-6C-P0 Paddlewheel Flowmeter 3.82" x 5.12" CLD 23 MLTPL
3-2537-6C-P1 Paddlewheel Flowmeter 3.82" x 6.73" CLD 23 MLTPL
3-2551-P0-11 Magmeter Flow Sensor 3.7" x 5.4" CLD 23 MLTPL
3-2551-P0-12 Magmeter Flow Sensor 3.7" x 5.4" CLD 23 MLTPL
3-2551-P0-21 Magmeter Flow Sensor 3.75" x 6.9" CLD 23 MLTPL
3-2551-P0-22 Magmeter Flow Sensor 3.75" x 6.9" CLD 23 MLTPL
3-2551-P0-41 Magmeter Flow Sensor 3.75" x 6.9" CLD 23 MLTPL
3-2551-P0-42 Magmeter Flow Sensor 3.75" x 6.9" CLD 23 MLTPL
3-2551-P1-11 Magmeter Flow Sensor 3.7" x 6.7" CLD 23 MLTPL
3-2551-P1-12 Magmeter Flow Sensor 3.7" x 6.7" CLD 23 MLTPL
3-2551-P1-21 Magmeter Flow Sensor 3.75" x 8.2" CLD 23 MLTPL
3-2551-P1-22 Magmeter Flow Sensor 3.75" x 8.2" CLD 23 MLTPL
3-2551-P1-41 Magmeter Flow Sensor 3.75" x 8.2" CLD 23 MLTPL
3-2551-P1-42 Magmeter Flow Sensor 3.75" x 8.2" CLD 23 MLTPL
3-2551-P2-11 Magmeter Flow Sensor 3.7" x 9.7" CLD 23 MLTPL
3-2551-P2-12 Magmeter Flow Sensor 3.7" x 9.7" CLD 23 MLTPL
3-2551-P2-21 Magmeter Flow Sensor 3.75" x 11.2" CLD 23 MLTPL
3-2551-P2-22 Magmeter Flow Sensor 3.75" x 11.2" CLD 23 MLTPL
3-2551-P2-41 Magmeter Flow Sensor 3.75" x 11.2" CLD 23 MLTPL
3-2551-P2-42 Magmeter Flow Sensor 3.75" x 11.2" CLD 23 MLTPL
P51530-P0 Paddlewheel Flow Sensor 2.25" x 4.1" CLD 23 MLTPL
P51530-P1 Paddlewheel Flow Sensor 2.25" x 5.4" CLD 23 MLTPL
P51530-P2 Paddlewheel Flow Sensor 2.25" x 8.4" CLD 23 MLTPL
P51530-P3 Paddlewheel Flow Sensor 2.25" x 11.7" CLD 23 MLTPL
P51530-P4 Paddlewheel Flow Sensor 2.25" x 13.1" CLD 23 MLTPL
P51530-P5 Paddlewheel Flow Sensor 2.25" x 16.1" CLD 23 MLTPL

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

Water Meters[2] [G]
Signet 2581 FlowtraMag Meter/3-2581-PT01 1" D. HOT MLTPL
Signet 2581 FlowtraMag Meter/3-2581-PT02 2" D. HOT MLTPL
Signet 2581 FlowtraMag Meter/3-2581-PT03 3" D. HOT MLTPL
Signet 2581 FlowtraMag Meter/3-2581-PT04 4" D. HOT MLTPL
Signet 2581 FlowtraMag Meter/3-2581-PT15 1 1/2" D. HOT MLTPL

[2] Certification request does not include flange gaskets.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



 
Georg Fischer Tpa SRL 
Via Seminella, 50/M
16012 Busalla (GE) 
Italy 
39 051 6324200


Facility : # 2 Italy

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Valves
+GF+ 375 CPVC ball valves (Female NPT or US socket) [G] 1/2" - 2" C. HOT MLTPL

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



 
Giacomini S.P.A. 
Via Per Alzo 39
28017 S. Maurizio D' Opaglio (NO) 
Italy 
39 0322 923372
Visit this company's website


Facility : D'Opaglio (NO), Italy

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Backflow Preventers
Dual Check Valve R623LF[G] 1/2", 3/4", 1" CLD 23 MLTPL

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

Valves[1] [G]
R254-LF 1/8" - 1" D. HOT MLTPL
R258CC-LF 1/2" - 1" D. HOT MLTPL
R258CP-LF 1/2" - 3/4" D. HOT MLTPL
R840V-LF 1/2" - 2" D. HOT MLTPL
R850-LF 1/8" - 2" D. HOT MLTPL
R850STLF 1/2" - 3/4" D. HOT MLTPL
R850V-LF 1/2" - 4" D. HOT MLTPL
R851-LF 1/8" - 2" D. HOT MLTPL
R858-LF 1/2" - 2" D. HOT MLTPL
R858STLF 1/2" - 3/4" D. HOT MLTPL
R910-LF 1/2" - 2" D. HOT MLTPL

[1] All trade names may or may not include a dash before the LF suffix.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



 
Global Aqua Technology 
13963 Ramona Avenue
Chino, CA 91710 
United States 
626-333-3336
Visit this company's website


Facility : AAB

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Reverse Osmosis Element[1] [2] [3] [4]
MBW-4040FR 4" x 40" CLD 23 MLTPL
MBW-8040FR-400/34 8" x 40" CLD 23 MLTPL
MBW-8040FR-PRO 8" x 40" CLD 23 MLTPL
MLP-8040FR-400/34 8" x 40" CLD 23 MLTPL
MSW-4040HF 4" x 40" CLD 23 MLTPL
MSW-8040HF-400 8" x 40" CLD 23 MLTPL
MSW-8040HF-440 8" x 40" CLD 23 MLTPL

[1] Certified for both wet and dry elements.
[2] All elements (wet and dry) require a pre-service flush:
    Fill the RO pressure vessel with qualified pretreated water.  The feed water pressure
    shall be restricted to 50 psi and the flow rate shall be equal to 16 GPM (gallons per
    minute).  The rejected water and product water shall be discharged completely.  The
    membrane element shall be flushed for 6 hours.  No antiscalant shall be added in
    flushing.
[3] The MSW-2521, MSW-2540, MSW-4021, MLP21-2521, MLP21-2540, MLP21-4021 elements are
    evaluated for point-of-entry end uses.
[4] Certified for minimum flow rate of:		
    MSW-8040-400, MSW-8040HF-400, MBW-8040-400, MLP-8040-400 : 30,000 L/day		
    MSW-8040-440:  3500 gal/day		
    MSW-8040HF-440:  6300 gal/day		
    MSW-4040, MSW-4040HF, MBW-4040, MBW-4040FR, MLP-4040, XLP-4040: 8,000 L/day		
    MBW-8040-440: 7700 gal/day		
    MBW-8040FR-PRO, MBW-8040FR-400/34 : 7350 gal/day		
    MLP-8040-440:  8750 gal/day		
    XLP-8040-400, MLP-8040FR-400/34: 7000 gal/day



 
Global Aqua Technology 
4475 Eucalyptus Ave, Ste#210,
Chino,, CA 91710 
United States 
626- 333-3336
Visit this company's website


Facility : AAF, China

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Filtration Devices/Components[1] [2]
DFL-4040 4" x 40" CLD 23 MLTPL
MBW-4040 4" x 40" CLD 23 MLTPL
MBW-4040FR 4" x 40" CLD 23 MLTPL
MBW-8040-400/34 8" x 40" CLD 23 MLTPL
MBW-8040-440 8"x 40" CLD 23 MLTPL
MBW-8040FR-400/34 8" x 40" CLD 23 MLTPL
MBW-8040FR-PRO 8" x 40" CLD 23 MLTPL
MLH-4040 4" x 40" CLD 23 MLTPL
MLP-2521 2 1/2" x 21" CLD 23 MLTPL
MLP-2540 2 1/2"x 40" CLD 23 MLTPL
MLP-4021 4" x 21" CLD 23 MLTPL
MLP-4040 4" x 40" CLD 23 MLTPL
MLP-8040-400 8" x 40" CLD 23 MLTPL
MLP-8040-440 8" x 40" CLD 23 MLTPL
MLP-8040FR-400/34 8" x 40" CLD 23 MLTPL
MSW-2521 2 1/2" x 21" CLD 23 MLTPL
MSW-2540 2 1/2"x 40" CLD 23 MLTPL
MSW-4040 4" x 40" CLD 23 MLTPL
MSW-4040HF 4" x 40" CLD 23 MLTPL
MSW-8040-400 8" x 40" CLD 23 MLTPL
MSW-8040-440 8" x 40" CLD 23 MLTPL
MSW-8040HF-400 8" x 40" CLD 23 MLTPL
MSW-8040HF-440 8" x 40" CLD 23 MLTPL
XLP-2514 2.5" x 14" CLD 23 MLTPL
XLP-2521 2 1/2" x 21" CLD 23 MLTPL
XLP-2540 2 1/2"x 40" CLD 23 MLTPL
XLP-4014 4" x 14" CLD 23 MLTPL
XLP-4021 4" x 21" CLD 23 MLTPL
XLP-4040 4" x 40" CLD 23 MLTPL
XLP-4611 4 3/5" x 11" CLD 23 MLTPL
XLP-8040-400 8" x 40" CLD 23 MLTPL

[1] Products have the following minimum daily flow:    					
    MLP-8040-440 - 10000 gallons					
    MLP-8040FR-400/34 - 10000 gallons					
    MLP-8040-400    - 10000 gallons					
    MBW-8040-400/34    - 9600 gallons					
    MBW-8040FR-400/34   - 9600 gallons					
    MLH-4040 - 2700 gallons					
    DFL-4040 - 1900 gallons					
    MLP-4040    - 2400 gallons					
    MBW-4040   - 2400 gallons					
    MBW-4040FR   - 2200 gallons					
    MLP-4021 - 1000 gallons					
    MSW-4040   - 1600 gallons					
    MSW-8040-400   - 7800 gallons					
    XLP-2514:280 gallons					
    XLP-4014:600 gallons					
    XLP-4611:1300 gallons					
    XLP-2540:850 gallons					
    XLP-4021:1000 gallons					
    XLP-2521:500 gallons					
    XLP-4040:2600 gallons					
    XLP-8040-400:12,000 gallons					
    MLP-2521:300 gallons					
    MLP-2540:750 gallons					
    MSW-2521:290 gallons					
    MSW-2540:600 gallons					
    MSW-4040HF:1600 gallons					
    MSW-8040-440:7500 gallons					
    MSW-8040HF-400:7000 gallons					
    MBW-8040FR-PRO:7500 gallons					
    MSW-8040HF-440:9500 gallons					
    MBW-8040-440:13,000 gallons
[2] Product requires a 1 hour deionized water flush at various flow rates and pressures
    depending on the model:
    MLP-8040-440 - 61.11 gpm at 150 PSI					
    MLP-8040FR-400/34 - 48.61 gpm at 150 PSI					
    MLP-8040-400   - 56.02 gpm at 150 PSI					
    MBW-8040-400/34    - 44.44 gpm at 225 PSI					
    MBW-8040FR-400/34 - 44.44 gpm at 225 PSI					
    MLH-4040- 12.50 gpm at 150 PSI					
    DFL-4040 - 8.80 gpm at 150 PSI					
    MLP-4040    - 11.11 gpm at 150 PSI					
    MBW-4040   - 11.11 gpm at 225 PSI					
    MBW-4040FR    - 10.19 gpm at 225 PSI					
    MLP-4021 - 8.68 gpm at 150 PSI					
    MSW-4040  - 13.89 gpm at 800 PSI					
    MSW-8040-400   - 67.71 gpm at 800 PSI					
    XLP-2514:1.3 gpm at 100 PSI					
    XLP-4014:2.78 gpm at 100 PSI					
    XLP-4611:6.02 gpm at 100 PSI					
    XLP-2540:3.94 gpm at 100 PSI					
    XLP-4021:4.63 gpm at 100 PSI					
    XLP-2521:2.31 gpm at 100 PSI					
    XLP-4040:12.04 gpm at 100 PSI					
    XLP-8040-400:55.55 gpm at 100 PSI					
    MLP-2521:1.39 gpm at 150 PSI					
    MLP-2540:3.47 gpm at 150 PSI					
    MSW-2521:2 1/2"2 gpm at 800 PSI					
    MSW-2540:5.21 gpm at 800 PSI					
    MSW-4040HF:13.89 gpm at 800 PSI					
    MSW-8040-440:65.1 gpm at 800 PSI					
    MSW-8040HF-400:60.76 gpm at 800 PSI					
    MBW-8040FR-PRO:65.1 gpm at 800 PSI					
    MSW-8040HF-440:82.47 gpm at 800 PSI					
    MBW-8040-440:60.19 gpm at 150 PSI



 
Global Filter, LLC. 
1201 Continental Pl NE
Cedar Rapids, IA 52402 
United States 
877.603.1003 
319-743-0110
Visit this company's website


Facility : Cedar Rapids, IA

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Filtration Devices/Components
GBFE4[1] [2] 5" x 24" CLD 23 MLTPL
GBFV8[1] [3] 8" x 25" - 35" CLD 23 MLTPL
GFHD1[1] [4] 4" x 8" - 34" CLD 23 MLTPL
GHLS-Series Filter Cartridges[11] [12] CLD 23 MLTPL
GMBE[1] [5] 26" - 40" x 72" CLD 23 MLTPL
GMBV[1] [6] 26" - 40" x 72" CLD 23 MLTPL
GTCH[1] [7] 8" - 18" x 28" - 40" CLD 23 MLTPL
GTCHB[1] [8] 8" - 18" x 28" - 40" CLD 23 MLTPL
Municlear-MB[9] [10] CLD 23 MLTPL
Municlear-SW[9] [10] CLD 23 MLTPL
PG-Series Filter Cartridges[11] [12] CLD 23 MLTPL
PP-Series Filter Cartridges[11] [12] CLD 23 MLTPL
PPE-Series Filter Cartridges[11] [12] CLD 23 MLTPL

[1] Certified for point-of-entry (POE) and municipal end uses.
[2] GBFE4-[basket size]-[port size]-[port
    style]-[outlet]-[material]-[P-rating]-[finish]-[MC]
    [basket size] - 12 (Size #4)
    [port size]   - 1N (1"FNPT)
    [outlet]      - 3 (bottom & opposite side outlet)[material] - 4 (304SS), 6 (316SS)
    [P-rating]    - 30 (300psi)
    [finish]      - GB (glass bead)
    [MC]          - NSF-61 certified
[3] GBFV8-[basket size]-[port size]-[port
    style]-[outlet]-[material]-[P-rating]-[finish]-[ASME status]-[MC]
    [basket size] - 15 (Size #1), 30 (Size #2), 230 (twin Size #2)
    [port size]   - 1 through 8 (1" through 8")
    [port style]  - N (NPT), F (flange), T (sanitary ferrule)
    [outlet]      - 1 (bottom outlet), 2 (opposite side outlet), 3 (bottom & opposite side 
                    outlet), 5 (same side outlet)
    [material]    - 4 (304SS), 6 (316SS)
    [P-rating]    - 15 (150psi)
    [finish]      - GB (glass bead), EP (electropolished)
    [ASME status] - U (ASME Code), blank (non-code)
    [MC]          - NSF-61 certified
[4] GFHD1-[length]-[port size]-[adapter type]-[material]-[P-rating]-[MC]
    [length]       - 5, 10, 20, 30 (5", 10", 20", 30")
    [port size]    - 75N (3/4"NPT), 1N (1"NPT), 75B (3/4"BSPP), 1B (1" BSPP)
    [adapter type] - D (DOE), 2 (222), 6 (226)
    [material]     - 4 (304), 6 (316)
    [P-rating]     - 30 (300psi)
    [MC]           - NSF-61 certified
[5] GMBE-[basket quantity]-[basket size]-[port size &
    style]-[material]-[P-rating]-[finish]-[MC]
    [basket quantity]   - 4, 6, 8, or 12
    [basket size]       - 30 (Size #2)
    [port size & style] - 4, 6, 8, or 10 (4", 6", 8", or 10" flange)
    [material]          - 4 (304SS), 6 (316SS)
    [P-rating]          - 15 (150psi)
    [finish]            - GB (glass bead)
    [MC]                - NSF-61 certified
[6] GMBV-[basket quantity]-[basket size]-[port size &
    style]-[material]-[P-rating]-[finish]-[ASME status]-[MC]
    [basket quantity]   - 4, 6, 8, or 12
    [basket size]       - 30 (Size #2)
    [port size & style] - 4, 6, 8, or 10 (4", 6", 8", or 10" flange)
    [material]          - 4 (304SS), 6 (316SS)
    [P-rating]          - 15 (150psi)
    [finish]            - GB (glass bead)
    [ASME status]       - U (ASME Code), blank (non-code)
    [MC]                - NSF-61 certified
[7] GTCH-[qty of cartridges]-[length]-[port
    size]-[outlet]-[material]-[P-rating]-[finish]-[ASME status]-[MC]
    [quantity of cartridges] - 3, 5, 7, 12, 21
    [length]                 - 1 (10"), 2 (20"), 3 (30"), 4 (40"
    [port size]              - 1 through 8 (1" through 8")
    [port style]             - N (NPT), F (flange), T (sanitary ferrule)
    [outlet]                 - 1 (bottom outlet), 2 (opposite outlet)
    [material]               - 4 (304SS), 6 (316SS)
    [P-rating]               - 15 (150psi)
    [finish]                 - GB (glass bead), EP (electropolished)
    [ASME status]            - U (ASME Code), blank (non-code)
    [MC]                     - NSF-61 certified
[8] GTCHB-[qty of cartridges]-[length]-[port size]-[outlet
    location]-[material]-[P-rating]-[finish]-[MC]
    [quantity of cartridges] - 3, 4, 5, 7, 12, 22
    [length]                 - 1 (10"), 2 (20"), 3 (30"), 4 (40")
    [port size]              - 1 through 8 (1" through 8")
    [port style]             - M (NPT), F (flange), T (sanitary ferrule)
    [outlet location]        - 1 (bottom outlet), 2 (opposite outlet)
    [material]               - 4 (304SS), 6 (316SS)
    [P-rating]               - 15 (150psi)
    [finish]                 - PC (polycoat)
    [MC]                     - NSF-61 certified
[9] Certified for the following part numbers: 
    
    Municlear MB 
    GWTB[BB][Micron]A[Length][End Cap Code][O-ring][Bond][Core][Suffix]
    GCTB[Micron]A[Length][End Cap Code][O-ring][Bond][Core]
    GATB[Micron]A[Length][End Cap Code][O-ring][Bond][Core]
    GRTB [Micron] A [Length] [End Cap Code] [O-ring] [Bond] [Core]
    [BB]   - Blank (2.5" OD), BB (4" OD)
    [Bond] - Blank (adhesive bond), TB (thermally bonded)
    [Core] - Blank (no core), PC (polypropylene core)
    [Suffix] - Blank (standard), MC (MC trade name)
    
    Municlear SW 
    GP[Micron]A[Length]P[End Caps][O-ring]-MC
     
    [Micron]  - 1, 3, 5, 10, 25, 50 
    [Length]  - 9.75" - 60" 
    [End Cap] - Blank (None; DOE, No gaskets), 3 (222 w/fin), 4 (222 w/flat cap), 5 (222
                w/spring), 6 (226 w/flat cap), 7 (226 w/fin), 8 (226 w/spring), 9 (SOE
                w/spring), 10 (DOE w/PP Core extender), 13 (SOE w/ PP Core Ext/Spring) 
    [O-ring]  - B (Buna N), E (EPDM), S (Silicone), Blank (None)
[10] Certified for a minimum daily flow of 4,320 gallons per 10" equivalent.
[11] Certified for the following part numbers:
     
     [Series][Micron][Efficiency][Length]C[End Cap Code][O-ring]
     [Series] - PP (2.7"OD); PPE (2.5"OD); PG (2.7"OD with reduced area); GHLS (2.7"OD) 
     [Micron] - 0.1 to 40
     [Efficiency] - A (absolute), N (nominal)
     [Length]  - 9.75" to 40"
     [Options] - I (stainless steel inserts), SS (stainless steel core), R (18 mega-ohm 
                 rinse), CS (stainless steel spring)
     [End Cap] - 2 (DOE with gaskets), 3 (222 w/fin), 4 (222 w/flat cap), 5 (222 w/spring), 6
     
                 (226 w/flat cap), 7 (226 w/fin), 8 (226 w/spring), 16 (213 with flat cap), 
                 28 (222 with tabs)
     [O-ring] - B (Buna N), E (EPDM), S (silicone)
[12] Certified for a minimum daily flow of 600 gallons per day.  Certified for use in
     municipal water treatment facilities only.

Microfiltration Devices
EHF3-Series Filter Cartridges[13] [14] CLD 23 MLTPL
HF-Series Filter Cartridges[13] [14] CLD 23 MLTPL
HF3-Series Filter Cartridges[13] [14] CLD 23 MLTPL
HFB-Series Filter Cartridges[15] [16] CLD 23 MLTPL

[13] Model number format:
     [series] [media] [micron rating] [efficiency] [length] [top type] [hardward] [oring]
     [series] - "HF", "HF3", "EHF3"
     [media] - PP (polypropylene)
     [micron rating] - 0.2 to 100um
     [efficiency] - A (absolute), N (nominal)
     [length] - 10" to 60", "1" (size #1), "2" (size #2)
     [top type] - none, or "A", "B", "C", "D", "E", or "S"
     [hardware] - none, or "P" (polypropylene)
     [Oring] - B (buna), E (EPDM), S (silicone)
     Certified for a minimum daily flow of 2,000 gallons
[14] HF-Series Filter Cartridges- Diameter: 6" Length : 20" to 80"
     EHF3-Series Filter Cartridges- Diameter: 6" Length :20" to 60"
     HF3-Series Filter Cartridges- Diameter: 6" Length : 20" to 60"
[15] Model number format:
     [series] [media] [micron rating] [efficiency] [length] [top type] [hardward] [oring]	
     [series] - "HFB"
     [media] - PP (polypropylene)		
     [micron rating] - 0.2 to 100um		
     [efficiency] - A (absolute), N (nominal)	
     [length] - 10" to 60", "1" (size #1), "2" (size #2)	
     [top type] - none, or "A", "B", "C", "D", "E", or "S"	
     [hardware] - none, or "P" (polypropylene)		
     [Oring] - B (buna), E (EPDM), S (silicone)	
     Certified for a minimum daily flow of 2,000 gallons
[16] HFB-Series Filter Cartridges - Diameter:6" Length: 12" to 24".

NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
      documentation shipped with the product are certified. 


 
Graver Technologies LLC 
200 Lake Drive
Glasgow, DE 19702 
United States 
800-249-1990 
302-731-1700
Visit this company's website


Facility : Glasgow, DE

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Microfiltration Devices
Crystal MBF Series Melt Blown Filter Cartridges [A]-[B][C][1] [4] CLD 23 MLTPL
HF RF [A]-[B][C][D][2] [3] D. HOT MLTPL
HVV Series Melt Blown Filter Cartridges [A]-[B][C][1] [4] CLD 23 MLTPL
High Flow Filter Cartridges HF [A]-[B][C][5] [6] CLD 23 MLTPL
MBC™ Melt Blown Filter Series MBC [A]-[B][C][1] [4] CLD 23 MLTPL
Stratum™ Series Melt Blown Filter Cartridges ST [A]-[B][C]-R31[1] [4] CLD 23 MLTPL
Stratum™ A Series Melt Blown Filter Cartridges STA [A]-[B][C][1] [4] CLD 23 MLTPL
Stratum™ C Series Melt Blown Filter Cartridges STC [A]-[B][C][1] [4] CLD 23 MLTPL

[1] A - Retention rating (0.5 - 75 microns) 
    B - Length (5" - 40") 
    C - End configuration 
        P6: Self-seal spring on one end 
        PX: Extended core 
        NN: No end caps, no gaskets
[2] HF RF [A]-[B][C][D]
    HF RF - Reverse Flow High Flow Series
    A     - Retention Rating (1-100 microns)
    B     - Length (40'' or 60")
    C     - End Configuration (P2 or P30)
    D     - Gasket or O-Ring
    E     - EPDM
    S     - Silicone
[3] Certified for a minimum daily flow of 270,000 L.
[4] Models 20" and smaller are evaluated to point-of-entry use.
    Models larger than 20" are certified for a minimum daily flow rate of 2880 gallons.
[5] HF[A]-[B][C]
    HF - High Flow Series
    A  - Retention Rating (1 - 100 microns)
    B  - Length (20" - 60")
    C  - Gasket or O-Ring
         E  - EPDM
         S  - Silicon
[6] Certified for a minimum daily flow of 270,000 L.



 
Great Plains Industries, Inc. 
5252 East 36th Street North
Wichita, KS 67220 
United States 
800-835-0113 
316-686-7361
Visit this company's website


Facility : Wichita, KS

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Water Meters [G]
UM(A)(B)(C)(D)(E)(F)-(G)(H)-(J)(K)[1] 1-12" D. HOT MLTPL

[1] UM (A)(B)(C)(D)(E)(F)-(G)(H)-(J)(K) where:
    A - SIZE
    	025 = 1 Inch, PVC, Sch 80
    	040 = 1-1/2 Inch, PVC, Sch 80
    	050 = 2 Inch, PVC, Sch 80
    	080 = 3 Inch, PVC, Sch 80
    	100 = 4 Inch, PVC, Sch 80
    	150 = 6 inch, Saddle
    	200 = 8 inch, Saddle
    	250 = 10 inch, Saddle
    	300 = 12 inch, Saddle
    B - Connection Type
    	SK = Socket (Meter w/ Tee: 1" to 4")
    	NF = NPT, Female (Meter w/ Tee: 1" to 4")
    	TF = BSPT, Female (Meter w/ Tee: 1", 1-1/2", 2")
    	FA = Flange, ANSI (Meter w/ Tee: 3", 4")
    	FD = Flange, DIN (Meter w/ Tee: 3", 4")
    	ST = Tube (Meter w/ Saddle Only)
    	SP = Pipe (Meter w/ Saddle Only)
    	SI = Plastic Irrigation Pipe (Saddle Meter Only)
    	XX = Insert Sensor Only (No meter body)
    C - Meter Body Material
    	P = PVC (Meter w/ Tee Only)
    	A = Aluminum (Meter w/ Saddle Only)
    	X = Insert Sensor Only (No meter body)
    D - Wetted Internals
    	RU = Ryton Sensor Body, Ultem XDCRs, EPDM O-rings
    	XX = Replacement Display Only
    E - Special Options
    	XX = Not applicable to UM meters
    F- Meter Accuracy
    	A20 =  2%  (All UM Meters)
    	XXX = N/A (Electronics Only)
    G - Electronics
    	QUDSBA = Battery Powered Local Display
    	QUC1LP = Loop Powered 4-20mA w/ Pulse Output; Local Display
    H - Certification
    	N1 = CE and NSF
    J - Display Configuration
    	GM = Gallon per Minute
    	LM = Liter per Minute
    K - Packaging Varies with configuration options
[2] QS2-(A)-(B)-P:
    A = Pipe Size
    060 = 6” diameter
    080 = 8” diameter
    100 = 10” diameter
    120 = 12” diameter
    B = Pipe Specification
    NPS = NPS/IPS/ASME Pipe
    TB = Metal Irrigation Tube Pipe
    PIP = Plastic Irrigation Pipe
[3] QS-200PW is the sensor insert only.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



 
GreenTech Environmental Co., Ltd. 
F16, Motorola Building Tower A
No.1 Wangjing East Road 
Chaoyang District, Beijing 100102 
China 
86 10 6439 9965
Visit this company's website


Facility : Yuanping, Shanxi, China

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Ultrafiltration Devices[1] [2] [G]
MemPort GT-UFH-04 20 cm x 152.7 cm CLD 23 MLTPL
MemPort GT-UFH-06 22 cm x 154 cm CLD 23 MLTPL
MemPort GT-UFH-07 22.5 cm x 172 cm CLD 23 MLTPL
MemPort GT-UFH-08 22.5 cm x 172 cm CLD 23 MLTPL
MemPort GT-UFV-04 20 cm x 174.9 cm CLD 23 MLTPL
MemPort GT-UFV-05 22 cm x 175.9 cm CLD 23 MLTPL
MemPort GT-UFV-06 25 cm x 172.2 cm CLD 23 MLTPL
MemPort GT-UFV-07 22.5 cm x 194.2 cm CLD 23 MLTPL
MemPort GT-UFV-08 22.5 cm x 194.2 cm CLD 23 MLTPL

[1] MemPort GT-UFH-04 requires a pre-service flush at a flow rate of forty (40) liters per
    minute (lpm) for two (2) hours using tap water.
    MemPort GT-UFH-06 requires a pre-service flush at a flow rate of sixty-four (64) liters
    per minute (lpm) for two (2) hours using tap water.
    MemPort GT-UFH-07 requires a pre-service flush at a flow rate of seventy (70) liters per
    minute (lpm) for two (2) hours using tap water.
    MemPort GT-UFH-08 requires a pre-service flush at a flow rate of eighty (80) liters per
    minute (lpm) for two (2) hours using tap water.
    MemPort GT-UFV-04 requires a pre-service flush at a flow rate of forty (40) liters per
    minute (lpm) for two (2) hours using tap water.
    MemPort GT-UFV-05 requires a pre-service flush at a flow rate of fifty-five (55) liters
    per minute (lpm) for two (2) hours using tap water.
    MemPort GT-UFV-06 requires a pre-service flush at a flow rate of sixty-four (64) liters
    per minute (lpm) for two (2) hours using tap water.
    MemPort GT-UFV-07 requires a pre-service flush at a flow rate of seventy (70) liters per
    minute (lpm) for two (2) hours using tap water.
    MemPort GT-UFV-08 requires a pre-service flush at a flow rate of eighty (80) liters per
    minute (lpm) for two (2) hours using tap water.
[2] MemPort GT-UFH-04 is certified for a minimum daily permeate generation of 19,200 liters
    for use in public water treatment facilities. 
    MemPort GT-UFH-06 is certified for a minimum daily permeate generation of 30,720 liters
    for use in public water treatment facilities. 
    MemPort GT-UFH-07 is certified for a minimum daily permeate generation of 33,600 liters
    for use in public water treatment facilities. 
    MemPort GT-UFH-08 is certified for a minimum daily permeate generation of 38,400 liters
    for use in public water treatment facilities. 
    MemPort GT-UFV-04 is certified for a minimum daily permeate generation of 19,200 liters
    for use in public water treatment facilities. 
    MemPort GT-UFV-05 is certified for a minimum daily permeate generation of 26,400 liters
    for use in public water treatment facilities. 
    MemPort GT-UFV-06 is certified for a minimum daily permeate generation of 30,720 liters
    for use in public water treatment facilities. 
    MemPort GT-UFV-07 is certified for a minimum daily permeate generation of 33,600 liters
    for use in public water treatment facilities. 
    MemPort GT-UFV-08 is certified for a minimum daily permeate generation of 38,400 liters
    for use in public water treatment facilities.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



 
Griffco Valve Inc. 
188 Creekside Drive
Amherst, NY 14228 
United States 
800-474-3326 
716-835-0891
Visit this company's website


Facility : Amherst, NY

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Valves [G]
BPHF (1)P(2)(3)[2] 1/2" - 1" CLD 23 MLTPL

[1] (1) Size 
        050 - 1/2" 
        075 - 3/4" 
        100 - 1" 
        155 - 1 1/2" 
        200 - 2"
        300 - 3" 
        400 - 4" 
    (2) Spring Opt 
        1 - 0 to 50 psi 
        2 - 10 to 250 psi 
    (3) Options 
        90  - 90 degree configuration
        F   - Flange connection
        S   - Socket connection 
        OSS - 316 stainless steel top
        U   - Union Connection
[2] (1) Size 
        050 - 1/2" 
        075 - 3/4" 
        105 - 1"
    (2) Spring Opt 
        1 - 0 to 50 psi 
        2 - 10 to 250 psi 
    (3) Options 
        F   - Flange connection 
        S   - Socket connection 
        OSS - 316 stainless steel top
        U   - Union Connection
[3] (1) Size 
        025 - 1/4"
        038 - 3/8" 
        050 - 1/2" 
    (2) Spring Opt 
        1 - 0 to 50 psi 
        2 - 10 to 250 psi 
    (3) Options
        90  - 90 degree configuration 
        F   - Flange connection
        S   - Socket connection 
        OSS - 316 stainless steel top
        U   - Union Connection
[4] (1) Size
        050 - 1/2"
        075 - 3/4"
        100 - 1"
    (2) Spring Opt
        1 - 0 to 50 psi
        2 - 10 to 250 psi
    (3) Options
        OSS - 316 Stainless Steel Top
[5] (Z) Optional 2-Port pressure relief valve 
    (1) Size 
        050 - 1/2" 
        075 - 3/4" 
        100 - 1"
        155 - 1 1/2" 
        200 - 2"
        300 - 3" 
        400 - 4" 
    (2) Spring Opt 
        1 - 0 to 50 psi 
        2 - 10 to 250 psi 
    (3) Options 
        90  - 90 degree configuration
        F   - Flange connection 
        S   - Socket connection 
        OSS - 316 stainless steel top
        U   - Union Connection
[6] (Z) Optional 2-Port pressure relief valve 
    (1) Size 
        025 - 1/4" 
        038 - 3/8" 
        050 - 1/2" 
    (2) Spring Opt 
        1 - 0 to 50 psi 
        2 - 10 to 250 psi 
    (3) Options 
        90  - 90 degree configuration
        F   - Flange connection
        S   - Socket connection 
        OSS - 316 stainless steel top
        U   - Union Connection
[7] (1) Size
        050 - 1/2"
        075 - 3/4"
        100 - 1"
    (2) Spring Opt
        1 - 0 to 50 psi
        2 - 10 to 250 psi
    (3) Options
        OSS - 316 Stainless Steel Top
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



 
Griffco Valve Inc.  
188 Creekside Drive
Amherst, NY 14228 
United States 
800-474-3326 
716-835-0891
Visit this company's website


Facility : Clemmons, NC

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Miscellaneous Process Devices/Components[1] [2] [3] [G]
Griffco True Union Y-Strainer 0.5", 0.75", 1" CLD 23 MLTPL
Griffco Y-Strainer 0.5", 0.75", 1" CLD 23 MLTPL

[1] Certified for use in tanks 1,200 gallons and greater.
[2] BFA Series Bulkhead Fitting descriptors:
    (XXX) Indicates size:
          040 - 4"
          060 - 6"
    (Y)   Indicates end connection: C – Socket x Thread
          S – Socket x Socket T – Thread x Thread
[3] Certified for PVC only. Certified products have part numbers in the form
    YS(A)(BBB)(C)(D) where:
    A  - Body Material
         1 (PVC)
         0 (Clear PVC) BBBB = Size
         0050 (1/2")
         0075 (3/4")
         0100 (1")
    C  - End Connection T = Threaded
    S  - Socket
    TU - True Union
    D  - O-ring material Blank = FKM
    E  - EPDM (not an option for TU ends)
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



 
GS Construction Participation LLC 
1209 North Orange Street
Wilmington, DE 19801-1120 
United States 
917-7426842


Facility : Yalova, Turkey

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Ultrafiltration Devices[1] [2]
GS AGM 25 x 222.0 +/- 0.1cm CLD 23 MLTPL
GS APM 80 25 x 204.2 +/- 0.1cm CLD 23 MLTPL
GS APM 80T 25 x 221.5 +/- 0.2cm CLD 23 MLTPL
GS APM 90T 25 x 221.6 +/- 0.2cm CLD 23 MLTPL
GS ASM 25 x 145.5 +/- 0.1cm CLD 23 MLTPL

[1] Certified for a minimum daily flow 40,000 liters (GS ASM), 80,000 (GS AGM), 86,400
    liters (GS APM 80T) and 90,000 liters (GS APM 80) and 97,200 liters (GS APM 90T).
[2] Membranes should be flushed with tap water before being placed into service at the
    following rates:
    GS ASM at 25 liters per minute for 240 minutes.
    GS AGM at 50 liters per minute for 240 minutes.
    GS APM at 57 liters per minute for 240 minutes.
    GS APM 80T at 60 liters per minute for 240 minutes.
    GS APM 90T at 68 liters per minute for 240 minutes.



 
Guangdong Liansu Technology Industrial Co., Ltd. DBA Lesso America, Inc. 
Liansu Industrial Estate
Longjiang Town, Shunde Zone 
Foshan, Guangdong 528318 
China 
86 757 2388 8337
Visit this company's website


Facility : # 2 China

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Ball Valves
Compact Ball Valve w/EPDM O-ring Seal(FIPT × FIPT) 1/2" CLD 23 MLTPL
Compact Ball Valve w/EPDM O-ring Seal(FIPT × FIPT) 3/4" CLD 23 MLTPL
Compact Ball Valve w/EPDM O-ring Seal(FIPT × FIPT) 1" CLD 23 MLTPL
Compact Ball Valve w/EPDM O-ring Seal(FIPT × FIPT) 1-1/4" CLD 23 MLTPL
Compact Ball Valve w/EPDM O-ring Seal(FIPT × FIPT) 1-1/2" CLD 23 MLTPL
Compact Ball Valve w/EPDM O-ring Seal(FIPT × FIPT) 2" CLD 23 MLTPL
Compact Ball Valve w/FKM O-ring Seal(FIPT × FIPT) 1/2" CLD 23 MLTPL
Compact Ball Valve w/FKM O-ring Seal(FIPT × FIPT) 3/4" CLD 23 MLTPL
Compact Ball Valve w/FKM O-ring Seal(FIPT × FIPT) 1" CLD 23 MLTPL
Compact Ball Valve w/FKM O-ring Seal(FIPT × FIPT) 1-1/4" CLD 23 MLTPL
Compact Ball Valve w/FKM O-ring Seal(FIPT × FIPT) 1-1/2" CLD 23 MLTPL
Compact Ball Valve w/FKM O-ring Seal(FIPT × FIPT) 2" CLD 23 MLTPL
Compact Ball Valve w/FKM O-ring Seal(SOC × SOC) 1/2" CLD 23 MLTPL
Compact Ball Valve w/FKM O-ring Seal(SOC × SOC) 3/4" CLD 23 MLTPL
Compact Ball Valve w/FKM O-ring Seal(SOC × SOC) 1" CLD 23 MLTPL
Compact Ball Valve w/FKM O-ring Seal(SOC × SOC) 1-1/4" CLD 23 MLTPL
Compact Ball Valve w/FKM O-ring Seal(SOC × SOC) 1-1/2" CLD 23 MLTPL
Compact Ball Valve w/FKM O-ring Seal(SOC × SOC) 2" CLD 23 MLTPL

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.


 
Guangdong Ospura Co., Ltd. 
No. 26, 27 Guangshun Road
Integrated Free Trade Zone 
Shantou City, Guangdong 515071 
China 
86 135 34912607


Facility : Guangdong, China

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Nanofiltration Devices[1] [2] [G]
NF-4040 8" x 40" CLD 23 MLTPL
NF-4040-HF 8" x 40" CLD 23 MLTPL
NF-4040-HR 8" x 40" CLD 23 MLTPL
NF-8040-400 8" x 40" CLD 23 MLTPL
NF-8040-400(34) 8" x 40" CLD 23 MLTPL
NF-8040-400-HF 8" x 40" CLD 23 MLTPL
NF-8040-400-HF(34) 8" x 40" CLD 23 MLTPL
NF-8040-400-HR 8" x 40" CLD 23 MLTPL
NF-8040-400HR(34) 8" x 40" CLD 23 MLTPL

[1] BW-4040 and FR-4040 are certified for a minimum daily flow of 9,100 liters per day.
    BW-4040-HR and ULP-4040-HR is certified for a minimum daily flow of 8,000 liters per
    day.
    ULP-4040 and XULP-4040 are certified for a minimum daily flow of 9,500 liters per day.
    ULP-4040-HF is certified for a minimum daily flow of 11,000 liters per day.
    XULP-2540 and ULP-2540 are certified for a minimum daily flow of 2,900 liters per day.
    ULP-4040-HF is certified for a minimum daily flow of 3,200 liters per day.
    ULP-8040-400 HR, XULP-8040-400, ULP-8040-400 (34) and ULP-8040-440-HR are certified for
    a minimum daily flow of 41,000 liters per day.
    ULP-8040-400, BW-8040-400, and BW-8040-400 (34) are certified for a minimum daily flow
    of 42,000 liters per day.
    BW-8040-440 is certified for a minimum daily flow of 44,940 liters per day.
    BW-8040-400-HR is certified for a minimum daily flow of 40,000 liters per day.
    BW-2521 and ULP-2521 are certified for a minimum daily flow of 1,200 liters per day.
    XULP-2521 is certified for a minimum daily flow of 1,400 liters per day.
    BW-4021 is certified for a minimum daily flow of 3,400 liters per day.
    ULP-4021 and XULP-4021 are certified for a minimum daily flow of 4,000 liters per day.
    BW-2540 is certified for a minimum daily flow of 3,200 liters per day.
    ULP-4040 ProArea is certified for a minimum daily flow of 12,500 liters per day.
    ULP-4040-HR ProArea is certified for a minimum daily flow of 10,200 liters per day.
    XULP-4040 ProArea is certified for a minimum daily flow of 12,000 liters per day.
    ULP-4021 ProArea is certified for a minimum daily flow of 5,000 liters per day.
    XULP-4021 ProArea is certified for a minimum daily flow of 4,500 liters per day.
    ULP-4040 HR is certified for a minimum daily flow of 8,000 liters per day.
    ULP-8040-440 is certified for a minimum daily flow of 47,000 liters per day.
    XULP-8040-440 is certified for a minimum daily flow of 44,000 liters per day.
    SW-8040-HR (34) is certified for a minimum daily flow of 23,000 liters per day.
    SW-8040-HF (34)  is certified for a minimum daily flow of 31,000 liters per day.
    SW-8040-440-HF  is certified for a minimum daily flow of 38,000 liters per day.
    SW-8040-440-HR  is certified for a minimum daily flow of 25,000 liters per day.
    
    SW-8040-400 and SW-8040-HR are certified for a minimum daily flow of 28,000 liters per
    day.
    SW-4040 is certified for a minimum daily flow of 7,000 liters per day.
    SW-8040-HF is certified for a minimum daily flow of 35,000 liters per day.
    SW-2540 is certified for a minimum daily flow of 2,600 liters per day. 
    
    NF-8040-400 and NF-8040-400 (34) are certified for a minimum daily flow of 45,000 liters
    per day.
    FR-8040-400 (34) is certified for a minimum daily flow of 40,000 liters per day.
    NF-8040-400-HF and NF-8040-400-HF(34) are certified for a minimum daily flow of 30,000
    liters per day.
    NF-8040-400-HR and NF-8040-400HR(34) are certified for a minimum daily flow of 32,000
    liters per day.
    NF-4040 is certified for a minimum daily flow of 11,000 liters per day.
    NF-4040-HF and NF-4040-HR are certified for a minimum daily flow of 8,000 liters per
    day.
    NF-2521-N9 is certified for a minimum daily flow of 1,100 liters per day.
    NF-2540-HF is certified for a minimum daily flow of 2,300 liters per day.
    NF-4040-N9 is certified for a minimum daily flow of 9,000 liters per day.
    NF-8040-400-N9 is certified for a minimum daily flow of 42,000 liters per day.
    NF-8040-400-N9(34) is certified for a minimum daily flow of 41,000 liters per day.
[2] BW-4040, FR-4040, XULP-4040, ULP-4040, ULP-4040-HR, and ULP-4040-HF should be flushed at
    1.7 gallons per minute for 1 hour with tap water.
    BW-4040-HR should be flushed at 1.5 gallons per minute for 1 hour with tap water.
    BW-8040-400-HR should be flushed at 7.3 gallons per minute for 1 hour with tap water.
    BW-8040-400, ULP-8040-400, ULP-8040-400, XULP-8040-400 HR, ULP-8040-400 HR, FR-8040-400
    (34), BW-8040-400 (34), ULP-8040-400 (34) and ULP-8040-440-HR should be flushed at 7.7
    gallons per minute for 1 hour with tap water.
    BW-8040-440 should be flushed at 8.24 gallons per minute for 24 hours with tap water.
    BW-2521 and ULP-2521 should be flushed at 0.221 gallons per minute for 24 hours with tap
    water.
    XULP-2521 should be flushed at 0.253 gallons per minute for 24 hours with tap water.
    BW-4021 should be flushed at 0.625 gallons per minute for 24 hours with tap water.
    ULP-4021 and XULP-4021 should be flushed at 0.729 gallons per minute for 24 hours with
    tap water.
    BW-2540 should be flushed at 0.59 gallons per minute for 24 hours with tap water.
    ULP-2540 and XULP-2540 should be flushed at 0.526 gallons per minute for 24 hours with
    tap water.
    ULP-4040 ProArea should be flushed at 2.292 gallons per minute for 24 hours with tap
    water.
    ULP-4040-HR ProArea should be flushed at 1.875 gallons per minute for 24 hours with tap
    water.
    XULP-4040 ProArea should be flushed at 2.153 gallons per minute for 24 hours with tap
    water.
    ULP-4021 ProArea should be flushed at 0.903 gallons per minute for 24 hours with tap
    water.
    XULP-4021 ProArea should be flushed at 0.88 gallons per minute for 24 hours with tap
    water.
    ULP-4040 HR should be flushed at 1.458 gallons per minute for 24 hours with tap water.
    ULP-8040-440 should be flushed at 8.542 gallons per minute for 24 hours with tap water.
    XULP-8040-440 should be flushed at 8.056 gallons per minute for 24 hours with tap water.
    SW-8040-HR (34) should be flushed at 4.306 gallons per minute for 24 hours with tap
    water.
    SW-8040-HF (34) should be flushed at 5.694 gallons per minute for 24 hours with tap
    water.
    SW-8040-440-HF should be flushed at 6.875 gallons per minute for 24 hours with tap
    water.
    SW-8040-440-HR should be flushed at 4.65 gallons per minute for 24 hours with tap water.
    
    SW-8040-400 and SW-8040-HR should be flushed at 5.208 gallons per minute for 24 hours
    with tap water.
    SW-4040 and SW-2540 should be flushed at 1.3019 gallons per minute for 24 hours with tap
    water.
    SW-8040-HF should be flushed at 6.389 gallons per minute for 24 hours with tap water.
    
    NF-8040-400 and NF-8040-400(34) should be flushed at 8.194 gallons per minute for 24
    hours with tap water.
    NF-8040-400-HF and NF-8040-400-HF(34) should be flushed at 5.486 gallons per minute for
    24 hours with tap water.
    NF-8040-400-HR and NF-8040-400HR(34) should be flushed at 5.833 gallons per minute for
    24 hours with tap water.
    NF-4040 should be flushed at 1.944 gallons per minute for 24 hours with tap water.
    NF-4040-HF and NF-4040-HR should be flushed at 1.458 gallons per minute for 24 hours
    with tap water.
    NF-2521-N9 should be flushed at 0.201 gallons per minute for 24 hours with tap water.
    NF-2540-HF should be flushed at  0.417 gallons per minute for 24 hours with tap water.
    NF-4040-N9 should be flushed at 1.667 gallons per minute for 24 hours with tap water.
    NF-8040-400-N9 should be flushed at  7.639 gallons per minute for 24 hours with tap
    water.
    NF-8040-400-N9(34) should be flushed at 7.5 gallons per minute for 24 hours with tap
    water.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

Nanofiltration Element[1] [2] [G]
NF-2521-N9 2.5 x 21 CLD 23 MLTPL
NF-2540-HF 2.5 x 40 CLD 23 MLTPL
NF-4040-N9 4 x 40 CLD 23 MLTPL
NF-8040-400-N9 8 x 40 CLD 23 MLTPL
NF-8040-400-N9 (34) 8 x 40 CLD 23 MLTPL

[1] BW-4040 and FR-4040 are certified for a minimum daily flow of 9,100 liters per day.
    BW-4040-HR and ULP-4040-HR is certified for a minimum daily flow of 8,000 liters per
    day.
    ULP-4040 and XULP-4040 are certified for a minimum daily flow of 9,500 liters per day.
    ULP-4040-HF is certified for a minimum daily flow of 11,000 liters per day.
    XULP-2540 and ULP-2540 are certified for a minimum daily flow of 2,900 liters per day.
    ULP-4040-HF is certified for a minimum daily flow of 3,200 liters per day.
    ULP-8040-400 HR, XULP-8040-400, ULP-8040-400 (34) and ULP-8040-440-HR are certified for
    a minimum daily flow of 41,000 liters per day.
    ULP-8040-400, BW-8040-400, and BW-8040-400 (34) are certified for a minimum daily flow
    of 42,000 liters per day.
    BW-8040-440 is certified for a minimum daily flow of 44,940 liters per day.
    BW-8040-400-HR is certified for a minimum daily flow of 40,000 liters per day.
    BW-2521 and ULP-2521 are certified for a minimum daily flow of 1,200 liters per day.
    XULP-2521 is certified for a minimum daily flow of 1,400 liters per day.
    BW-4021 is certified for a minimum daily flow of 3,400 liters per day.
    ULP-4021 and XULP-4021 are certified for a minimum daily flow of 4,000 liters per day.
    BW-2540 is certified for a minimum daily flow of 3,200 liters per day.
    ULP-4040 ProArea is certified for a minimum daily flow of 12,500 liters per day.
    ULP-4040-HR ProArea is certified for a minimum daily flow of 10,200 liters per day.
    XULP-4040 ProArea is certified for a minimum daily flow of 12,000 liters per day.
    ULP-4021 ProArea is certified for a minimum daily flow of 5,000 liters per day.
    XULP-4021 ProArea is certified for a minimum daily flow of 4,500 liters per day.
    ULP-4040 HR is certified for a minimum daily flow of 8,000 liters per day.
    ULP-8040-440 is certified for a minimum daily flow of 47,000 liters per day.
    XULP-8040-440 is certified for a minimum daily flow of 44,000 liters per day.
    SW-8040-HR (34) is certified for a minimum daily flow of 23,000 liters per day.
    SW-8040-HF (34)  is certified for a minimum daily flow of 31,000 liters per day.
    SW-8040-440-HF  is certified for a minimum daily flow of 38,000 liters per day.
    SW-8040-440-HR  is certified for a minimum daily flow of 25,000 liters per day.
    
    SW-8040-400 and SW-8040-HR are certified for a minimum daily flow of 28,000 liters per
    day.
    SW-4040 is certified for a minimum daily flow of 7,000 liters per day.
    SW-8040-HF is certified for a minimum daily flow of 35,000 liters per day.
    SW-2540 is certified for a minimum daily flow of 2,600 liters per day. 
    
    NF-8040-400 and NF-8040-400 (34) are certified for a minimum daily flow of 45,000 liters
    per day.
    FR-8040-400 (34) is certified for a minimum daily flow of 40,000 liters per day.
    NF-8040-400-HF and NF-8040-400-HF(34) are certified for a minimum daily flow of 30,000
    liters per day.
    NF-8040-400-HR and NF-8040-400HR(34) are certified for a minimum daily flow of 32,000
    liters per day.
    NF-4040 is certified for a minimum daily flow of 11,000 liters per day.
    NF-4040-HF and NF-4040-HR are certified for a minimum daily flow of 8,000 liters per
    day.
    NF-2521-N9 is certified for a minimum daily flow of 1,100 liters per day.
    NF-2540-HF is certified for a minimum daily flow of 2,300 liters per day.
    NF-4040-N9 is certified for a minimum daily flow of 9,000 liters per day.
    NF-8040-400-N9 is certified for a minimum daily flow of 42,000 liters per day.
    NF-8040-400-N9(34) is certified for a minimum daily flow of 41,000 liters per day.
[2] BW-4040, FR-4040, XULP-4040, ULP-4040, ULP-4040-HR, and ULP-4040-HF should be flushed at
    1.7 gallons per minute for 1 hour with tap water.
    BW-4040-HR should be flushed at 1.5 gallons per minute for 1 hour with tap water.
    BW-8040-400-HR should be flushed at 7.3 gallons per minute for 1 hour with tap water.
    BW-8040-400, ULP-8040-400, ULP-8040-400, XULP-8040-400 HR, ULP-8040-400 HR, FR-8040-400
    (34), BW-8040-400 (34), ULP-8040-400 (34) and ULP-8040-440-HR should be flushed at 7.7
    gallons per minute for 1 hour with tap water.
    BW-8040-440 should be flushed at 8.24 gallons per minute for 24 hours with tap water.
    BW-2521 and ULP-2521 should be flushed at 0.221 gallons per minute for 24 hours with tap
    water.
    XULP-2521 should be flushed at 0.253 gallons per minute for 24 hours with tap water.
    BW-4021 should be flushed at 0.625 gallons per minute for 24 hours with tap water.
    ULP-4021 and XULP-4021 should be flushed at 0.729 gallons per minute for 24 hours with
    tap water.
    BW-2540 should be flushed at 0.59 gallons per minute for 24 hours with tap water.
    ULP-2540 and XULP-2540 should be flushed at 0.526 gallons per minute for 24 hours with
    tap water.
    ULP-4040 ProArea should be flushed at 2.292 gallons per minute for 24 hours with tap
    water.
    ULP-4040-HR ProArea should be flushed at 1.875 gallons per minute for 24 hours with tap
    water.
    XULP-4040 ProArea should be flushed at 2.153 gallons per minute for 24 hours with tap
    water.
    ULP-4021 ProArea should be flushed at 0.903 gallons per minute for 24 hours with tap
    water.
    XULP-4021 ProArea should be flushed at 0.88 gallons per minute for 24 hours with tap
    water.
    ULP-4040 HR should be flushed at 1.458 gallons per minute for 24 hours with tap water.
    ULP-8040-440 should be flushed at 8.542 gallons per minute for 24 hours with tap water.
    XULP-8040-440 should be flushed at 8.056 gallons per minute for 24 hours with tap water.
    SW-8040-HR (34) should be flushed at 4.306 gallons per minute for 24 hours with tap
    water.
    SW-8040-HF (34) should be flushed at 5.694 gallons per minute for 24 hours with tap
    water.
    SW-8040-440-HF should be flushed at 6.875 gallons per minute for 24 hours with tap
    water.
    SW-8040-440-HR should be flushed at 4.65 gallons per minute for 24 hours with tap water.
    
    SW-8040-400 and SW-8040-HR should be flushed at 5.208 gallons per minute for 24 hours
    with tap water.
    SW-4040 and SW-2540 should be flushed at 1.3019 gallons per minute for 24 hours with tap
    water.
    SW-8040-HF should be flushed at 6.389 gallons per minute for 24 hours with tap water.
    
    NF-8040-400 and NF-8040-400(34) should be flushed at 8.194 gallons per minute for 24
    hours with tap water.
    NF-8040-400-HF and NF-8040-400-HF(34) should be flushed at 5.486 gallons per minute for
    24 hours with tap water.
    NF-8040-400-HR and NF-8040-400HR(34) should be flushed at 5.833 gallons per minute for
    24 hours with tap water.
    NF-4040 should be flushed at 1.944 gallons per minute for 24 hours with tap water.
    NF-4040-HF and NF-4040-HR should be flushed at 1.458 gallons per minute for 24 hours
    with tap water.
    NF-2521-N9 should be flushed at 0.201 gallons per minute for 24 hours with tap water.
    NF-2540-HF should be flushed at  0.417 gallons per minute for 24 hours with tap water.
    NF-4040-N9 should be flushed at 1.667 gallons per minute for 24 hours with tap water.
    NF-8040-400-N9 should be flushed at  7.639 gallons per minute for 24 hours with tap
    water.
    NF-8040-400-N9(34) should be flushed at 7.5 gallons per minute for 24 hours with tap
    water.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

Reverse Osmosis Element[1] [2] [G]
FR-4040 4" x 40" CLD 23 MLTPL
FR-8040-400 (34) 8" x 40" CLD 23 MLTPL
SW-8040-440-HF 8 x 40 CLD 23 MLTPL
SW-8040-HF 8" x 40" CLD 23 MLTPL
SW-8040-HF (34) 8 x 40 CLD 23 MLTPL
ULP-4040-HF 4" x 40" CLD 23 MLTPL

[1] BW-4040 and FR-4040 are certified for a minimum daily flow of 9,100 liters per day.
    BW-4040-HR and ULP-4040-HR is certified for a minimum daily flow of 8,000 liters per
    day.
    ULP-4040 and XULP-4040 are certified for a minimum daily flow of 9,500 liters per day.
    ULP-4040-HF is certified for a minimum daily flow of 11,000 liters per day.
    XULP-2540 and ULP-2540 are certified for a minimum daily flow of 2,900 liters per day.
    ULP-4040-HF is certified for a minimum daily flow of 3,200 liters per day.
    ULP-8040-400 HR, XULP-8040-400, ULP-8040-400 (34) and ULP-8040-440-HR are certified for
    a minimum daily flow of 41,000 liters per day.
    ULP-8040-400, BW-8040-400, and BW-8040-400 (34) are certified for a minimum daily flow
    of 42,000 liters per day.
    BW-8040-440 is certified for a minimum daily flow of 44,940 liters per day.
    BW-8040-400-HR is certified for a minimum daily flow of 40,000 liters per day.
    BW-2521 and ULP-2521 are certified for a minimum daily flow of 1,200 liters per day.
    XULP-2521 is certified for a minimum daily flow of 1,400 liters per day.
    BW-4021 is certified for a minimum daily flow of 3,400 liters per day.
    ULP-4021 and XULP-4021 are certified for a minimum daily flow of 4,000 liters per day.
    BW-2540 is certified for a minimum daily flow of 3,200 liters per day.
    ULP-4040 ProArea is certified for a minimum daily flow of 12,500 liters per day.
    ULP-4040-HR ProArea is certified for a minimum daily flow of 10,200 liters per day.
    XULP-4040 ProArea is certified for a minimum daily flow of 12,000 liters per day.
    ULP-4021 ProArea is certified for a minimum daily flow of 5,000 liters per day.
    XULP-4021 ProArea is certified for a minimum daily flow of 4,500 liters per day.
    ULP-4040 HR is certified for a minimum daily flow of 8,000 liters per day.
    ULP-8040-440 is certified for a minimum daily flow of 47,000 liters per day.
    XULP-8040-440 is certified for a minimum daily flow of 44,000 liters per day.
    SW-8040-HR (34) is certified for a minimum daily flow of 23,000 liters per day.
    SW-8040-HF (34)  is certified for a minimum daily flow of 31,000 liters per day.
    SW-8040-440-HF  is certified for a minimum daily flow of 38,000 liters per day.
    SW-8040-440-HR  is certified for a minimum daily flow of 25,000 liters per day.
    
    SW-8040-400 and SW-8040-HR are certified for a minimum daily flow of 28,000 liters per
    day.
    SW-4040 is certified for a minimum daily flow of 7,000 liters per day.
    SW-8040-HF is certified for a minimum daily flow of 35,000 liters per day.
    SW-2540 is certified for a minimum daily flow of 2,600 liters per day. 
    
    NF-8040-400 and NF-8040-400 (34) are certified for a minimum daily flow of 45,000 liters
    per day.
    FR-8040-400 (34) is certified for a minimum daily flow of 40,000 liters per day.
    NF-8040-400-HF and NF-8040-400-HF(34) are certified for a minimum daily flow of 30,000
    liters per day.
    NF-8040-400-HR and NF-8040-400HR(34) are certified for a minimum daily flow of 32,000
    liters per day.
    NF-4040 is certified for a minimum daily flow of 11,000 liters per day.
    NF-4040-HF and NF-4040-HR are certified for a minimum daily flow of 8,000 liters per
    day.
    NF-2521-N9 is certified for a minimum daily flow of 1,100 liters per day.
    NF-2540-HF is certified for a minimum daily flow of 2,300 liters per day.
    NF-4040-N9 is certified for a minimum daily flow of 9,000 liters per day.
    NF-8040-400-N9 is certified for a minimum daily flow of 42,000 liters per day.
    NF-8040-400-N9(34) is certified for a minimum daily flow of 41,000 liters per day.
[2] BW-4040, FR-4040, XULP-4040, ULP-4040, ULP-4040-HR, and ULP-4040-HF should be flushed at
    1.7 gallons per minute for 1 hour with tap water.
    BW-4040-HR should be flushed at 1.5 gallons per minute for 1 hour with tap water.
    BW-8040-400-HR should be flushed at 7.3 gallons per minute for 1 hour with tap water.
    BW-8040-400, ULP-8040-400, ULP-8040-400, XULP-8040-400 HR, ULP-8040-400 HR, FR-8040-400
    (34), BW-8040-400 (34), ULP-8040-400 (34) and ULP-8040-440-HR should be flushed at 7.7
    gallons per minute for 1 hour with tap water.
    BW-8040-440 should be flushed at 8.24 gallons per minute for 24 hours with tap water.
    BW-2521 and ULP-2521 should be flushed at 0.221 gallons per minute for 24 hours with tap
    water.
    XULP-2521 should be flushed at 0.253 gallons per minute for 24 hours with tap water.
    BW-4021 should be flushed at 0.625 gallons per minute for 24 hours with tap water.
    ULP-4021 and XULP-4021 should be flushed at 0.729 gallons per minute for 24 hours with
    tap water.
    BW-2540 should be flushed at 0.59 gallons per minute for 24 hours with tap water.
    ULP-2540 and XULP-2540 should be flushed at 0.526 gallons per minute for 24 hours with
    tap water.
    ULP-4040 ProArea should be flushed at 2.292 gallons per minute for 24 hours with tap
    water.
    ULP-4040-HR ProArea should be flushed at 1.875 gallons per minute for 24 hours with tap
    water.
    XULP-4040 ProArea should be flushed at 2.153 gallons per minute for 24 hours with tap
    water.
    ULP-4021 ProArea should be flushed at 0.903 gallons per minute for 24 hours with tap
    water.
    XULP-4021 ProArea should be flushed at 0.88 gallons per minute for 24 hours with tap
    water.
    ULP-4040 HR should be flushed at 1.458 gallons per minute for 24 hours with tap water.
    ULP-8040-440 should be flushed at 8.542 gallons per minute for 24 hours with tap water.
    XULP-8040-440 should be flushed at 8.056 gallons per minute for 24 hours with tap water.
    SW-8040-HR (34) should be flushed at 4.306 gallons per minute for 24 hours with tap
    water.
    SW-8040-HF (34) should be flushed at 5.694 gallons per minute for 24 hours with tap
    water.
    SW-8040-440-HF should be flushed at 6.875 gallons per minute for 24 hours with tap
    water.
    SW-8040-440-HR should be flushed at 4.65 gallons per minute for 24 hours with tap water.
    
    SW-8040-400 and SW-8040-HR should be flushed at 5.208 gallons per minute for 24 hours
    with tap water.
    SW-4040 and SW-2540 should be flushed at 1.3019 gallons per minute for 24 hours with tap
    water.
    SW-8040-HF should be flushed at 6.389 gallons per minute for 24 hours with tap water.
    
    NF-8040-400 and NF-8040-400(34) should be flushed at 8.194 gallons per minute for 24
    hours with tap water.
    NF-8040-400-HF and NF-8040-400-HF(34) should be flushed at 5.486 gallons per minute for
    24 hours with tap water.
    NF-8040-400-HR and NF-8040-400HR(34) should be flushed at 5.833 gallons per minute for
    24 hours with tap water.
    NF-4040 should be flushed at 1.944 gallons per minute for 24 hours with tap water.
    NF-4040-HF and NF-4040-HR should be flushed at 1.458 gallons per minute for 24 hours
    with tap water.
    NF-2521-N9 should be flushed at 0.201 gallons per minute for 24 hours with tap water.
    NF-2540-HF should be flushed at  0.417 gallons per minute for 24 hours with tap water.
    NF-4040-N9 should be flushed at 1.667 gallons per minute for 24 hours with tap water.
    NF-8040-400-N9 should be flushed at  7.639 gallons per minute for 24 hours with tap
    water.
    NF-8040-400-N9(34) should be flushed at 7.5 gallons per minute for 24 hours with tap
    water.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



 
Guilford Mills, Inc. 
1001 Military Cutoff Road
Suite 300 
Wilmington, NC 28405 
United States 
336-316-4000


Facility : Pine Grove, PA

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Filtration Devices/Components
FreFlo® Hybrid™ 6-20 mil thickness CLD 23 MLTPL
Freflo[1] 6-20 mil thickness CLD 23 MLTPL
PCT.100.SE[1] 6-20 mil thickness CLD 23 MLTPL

[1] Certified for a minimum daily flow of 378 Liters per day.



Facility : Yangzhou, Jiangsu, China

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Filtration Devices/Components[1]
FreFlo® 6-20 mil thickness CLD 23 MLTPL
FreFlo® Hybrid™ 6-20 mil thickness CLD 23 MLTPL
PCT.100.SE 6-20 mil thickness CLD 23 MLTPL

[1] Certified for a minimum daily flow of 378 liters per day.



 
H.B. Fuller Company 
1200 Willow Lake Boulevard
St. Paul, MN 55110-5101 
United States 
651-236-5900
Visit this company's website


Facility : Grand Rapids, MI

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Potting Compounds
H.B. Fuller® UR-2187-A and H.B. Fuller® UR-2187-B [3] CLD 23 PUR

[3] Certified for use as a potting material in hollow fiber filtration devices 8 inches in
    diameter and larger with a minimum daily flow of 2000 Liters.



Facility : Jiangsu Province, China

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Potting Compounds
FE7811 A CLD 23 EPOXY
FE7811 AHV CLD 23 EPOXY



 
H2O Innovation Inc. 
330, Rue St-Vallier Est., Suite 340
Québec, QC G1K 9C5 
Canada 
+1 418 688 0170
Visit this company's website


Facility : Gelves, Spain

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Filtration Devices/Components [G]
Automesh AMxyzSF[3] 4" - 14" CLD 23 MLTPL
Calado AxzCMISSF[4] 4" - 14" CLD 23 MLTPL
EKOxyzSF[1] 3" - 12" CLD 23 MLTPL
FyxzMF[2] 1" - 1200" CLD 23 MLTPL

[1] EKOxyzSF:
    xy where:
    x = size 3 -12" (100-500 mm in customized filters)
    y = type of filter (EKO: VLS, VS - EKO and EKOlu: HS, H2S, 43S, S3CS)
    z = code for customized filters (F = filter with GFRP body)
    "SF" is a code used for filter with components for the US market
    Certified for a minimum daily flow of 148,800 L.
[2] FyxzMF where:
    x = size 1 - 1200"
    y = type (AV: media filter with collector arms or D: media filter with nozzles)
    z = code for customized filters (F: filter with GFRP body)
    "MF" is code used for media filter with components for US market.
    
    Certified for minimum daily flow of 2,016,000 liters.
[3] Automesh AMxyzSF where:
    x = size from 4 - 14" (100-500 mm in customized filters)
    y = type of filter (S = simple, E= equipped) 
    z = code for customized filters (G= grey, R= red, F=filter with GFRP body, TXL only for
    AM14ETXLSF, filters 4-12" has no code)
    "SF" is code used for filter with components for the US market.
    Automesh AMxyzSF Certified for minimum daily flow of 1,800,000 L.
[4] Calado AxzCMISSF where:
    x = size from 4 - 14" (100-500 mm in customized filters)
    z = F (filter with GFRP body) 
    "SF" is code used for filter with components for the US market.
    Calado AxzCMISSF Certified for minimum daily flow of 528,000 L
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



 
Hainan Litree Purifying Technology Co., Ltd. 
No.13, Hengsan Road
Yunlong Industrial Park, National 
Hi-tech Zone, Haikou, Hainan 571137 
China 
86 755 83849777
Visit this company's website


Facility : Haikou, China

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Ultrafiltration Devices[1] [2]
LH3-0650-V 187 mm x 1398 mm CLD 23 MLTPL
LH3-1060-V 277 mm x 1713 mm CLD 23 MLTPL
LH3-1260-V 393 mm x 1873 mm CLD 23 MLTPL

[1] Certified for a minimum daily flow of 14,400 L.
[2] Only products bearing the NSF Mark on the product, product packaging, and/or
    documentation shipped with the product are Certified.



 
Hammonds Water Treatment Systems, Inc. 
6807 West Little York Road
Houston, TX 77040 
United States 
800-582-4224 
281-999-2900
Visit this company's website


Facility : Houston, TX

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Chemical Feeders[1] [2]
HTS-10P N/A CLD 23 MLTPL
HTS-280-P N/A CLD 23 MLTPL
HTS-80-P N/A CLD 23 MLTPL

[1] Certification of this product has been performed to the health effects requirements of
    NSF/ANSI Standard 61, which assesses the acceptability of potential extractants  from
    the chemical feeder when used with the manufacturer's recommended use chemicals.  Any
    modifications including the use of chemicals other than those recommended by the
    manufacturer or chemicals that are not compliant to NSF/ANSI Standard 60 will void the
    NSF certification for this feeder.
[2] Certified for a maximum 0.25% calcium hypochlorite solution added to drinking water to
    effect a maximum use level (MUL) of 10 ppm total chlorine, with a minimum of 10 gallons
    per minute water treated per day.



 
Hangzhou Haina Environmental Protection Tech Co., Ltd. DBA Zhejiang OSMO 
Membrane Technology Co., Ltd.
10th Flr, Bldg A, Hangzhou Lifuhao Ind 
Park, No. 88 Pingchuang Rd, Pingyao 
Yuhang, Hangzhou, Zhejiang 311115,  
China 
86 571 8853 2213
Visit this company's website


Facility : Huzhou, Zhejiang, China

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Reverse Osmosis Element
8040 FR[3] [4] 8" x 40" CLD 23 MLTPL
BW 4040 FR[1] [2] 4" x 40" CLD 23 MLTPL
HiOsmo™ EGFR-400 [3] [4] 8" x 40" CLD 23 MLTPL
HiOsmo™ EGXFR-400/34[3] [4] 8" x 40" CLD 23 MLTPL
HiOsmo™ EGXFRLE-400/34[3] [4] 8" x 40" CLD 23 MLTPL
PLUS-400-FR[3] [4] 8" x 40" CLD 23 MLTPL
PLUS-400-HFR[3] [4] 8" x 40" CLD 23 MLTPL
PLUS-400-XFR[3] [4] 8" x 40" CLD 23 MLTPL
PLUS-400-XFRLE[3] [4] 8" x 40" CLD 23 MLTPL
PLUS-4040-FR[3] [4] 4" x 40" CLD 23 MLTPL
SW-400-FR[3] [4] 8" x 40" CLD 23 MLTPL
SW-400-XFR [3] [4] 8" x 40" CLD 23 MLTPL
4040 FR[1] [2] 4" x 40" CLD 23 MLTPL

[1] BW 4040 LP, BW 4040 ULP and BW 4040 XLP are certified for a minimum flow of 2000 gallons
    per day. 
    
    BW 4040 FR is certified for a minimum flow of 1840 gallons per day.
    
    Model SW 4021 LP is certified for a minimum daily flow of 560 gallons.
    
    Models BW 4021 LP, BW 4021 ULP, BW 4021 XLP and SW 4021 ULP are certified for a minimum
    daily flow of 800 gallons
    
    Model BW 4021 XLP+ is certified for a minimum daily flow of 1120 gallons
    
    Model SW 4040 LP is certified for a minimum daily flow of 1360 gallons
    
    Model SW 4040 ULP is certified for a minimum daily flow of 2000 gallons
    
    Model BW 4040 XPL+ is certified for a minimum daily flow of 2480 gallons
    
    Model SW 2521 LP is certified for a minimum daily flow of 240 gallons.
    
    Models BW 2521 LP,BW 2521 ULP, BW 2521 XLP and SW 2521 ULP are certified for a minimum
    daily flow of 320 gallons.
    
    Model BW 2521 XLP+ is certified for a minimum daily flow of 440 gallons.
    
    Model SW 2540 LP is certified for a minimum daily flow of 480 gallons.
    
    Models BW 2540 LP,BW 2540 ULP, BW 2540 XLP and SW 2540 ULP are certified for a minimum
    daily flow of 640 gallons.
    
    Model BW 2540 XLP+ is certified for a minimum daily flow of 880 gallons.
[2] Product requires flushing with deionized water at 2.628 liters per minute for 1 hour
    prior to use.
[3] Trade names PLUS-4040-FR, PLUS-4040-LP, PLUS-4040-ULP, PLUS-4040-XLP and SW-4040-HRLE
    require a pre-service flush at 2.628 liters per minute (LPM) for two (2) hours using
    deionized water.
    
    Trade names PLUS-400-FR,PLUS-400-XFR, PLUS-400-XFRLE, HiOsmo™ EGFR-400, HiOsmo™
    EGXFR-400/34, HiOsmo™ EGXFRLE-400/34, PLUS-400-LP, PLUS-400-ULP, ECO-400-PRO, HiOsmo™
    EGHRLE-400, HiOsmo™ EGHRLE-440, PLUS-400-XLP, MAX-440-ULP,HiOsmo™ EGHRLE-440, HiOsmo™
    EGHR-440, SW-400-HRLE and SW-440-HRLE require a pre-service flush at 12 liters per
    minute (LPM) for two (2) hours using deionized water.
[4] Trade names PLUS-4040-FR, PLUS-4040-LP, PLUS-4040-ULP, PLUS-4040-XLP and SW-4040-HRLE
    are certified for use exclusively in public water treatment facilities for a minimum
    daily permeate generation of 2,000 gallons. 
    
    Trade name SW-400-HRLE is certified for use exclusively in public water treatment
    facilities for a minimum daily permeate generation of 5,000 gallons. 
    
    Trade name SW-440-HRLE is certified for use exclusively in public water treatment
    facilities for a minimum daily permeate generation of 6,000 gallons. 
    
    Trade names PLUS-400-FR,PLUS-400-XFR, PLUS-400-XFRLE, HiOsmo™ EGFR-400, HiOsmo™
    EGXFR-400/34, HiOsmo™ EGXFRLE-400/34, PLUS-400-LP, PLUS-400-ULP, PLUS-400-XLP,
    ECO-400-PRO, HiOsmo™ EGHRLE-400, HiOsmo™ EGHRLE-440 and MAX-440-ULP, HiOsmo™ EGHRLE-440,
    HiOsmo™ EGHR-440 are certified for use exclusively in public water treatment facilities
    for a minimum daily permeate generation of 9,000 gallons.



 
Hangzhou Supmea Automation Co., Ltd. 
Room No.526 5th Floor, Building 4
Singapore-hangzhou Science & Tech 
Park, Hangzhou, Zhejiang 
China 
86 187 5814 3110


Facility : Jiaxing, Zhejiang, China

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Water Meters[G]
FMC240 Flowmeter 10 mm - 1000 mm C. HOT MLTPL
FMC400 Flowmeter 10 mm - 1000 mm C. HOT MLTPL
FMC410 Flowmeter 10 mm - 1000 mm C. HOT MLTPL
FMX470 Flowmeter 15 mm - 1000 mm C. HOT MLTPL
LDG-SUP Flowmeter 10 mm - 1000 mm C. HOT MLTPL
LDG-SUP-A100 Flowmeter 10 mm - 1000 mm C. HOT MLTPL
LDG-SUP-A100D Flowmeter 15 mm - 1000 mm C. HOT MLTPL

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
      documentation shipped with the product are Certified.


 
Hangzhou Yingpu Environmental Technology Co., Ltd. 
7th floor, Block I, No.88 Xiangyuan Road
Gongshu District, Hangzhou 
Zhejiang 310011 
China 
86 571 88212159
Visit this company's website


Facility : Zhejiang, China

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Ultrafiltration Devices[1] [2]
0.9MB 80WT 9.84 x 83.07" CLD 23 MLTPL

[1]  Requires a pre-service flush at 2 gallons per minute (gpm) for 60 minutes with
    deionized water.
[2] Certified for a minimum daily permeate generation of 115,200 liters for use in public
    water treatment facilities.



 
HANTS CONTROL CORPORATION 
40 Jialing St
Qianjhen District 
Kaohsiung 806613 
Taiwan 
886 73311060


Facility : # 1

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Valves[G]
HBB-175FG 2.5" - 10" CLD 23 MLTPL
HBB-300FG 2.5" - 10" CLD 23 MLTPL
HBF-300G 2" - 12" CLD 23 MLTPL
HBF-300W 2" - 12" CLD 23 MLTPL
HGN-300FF 2.5" - 12" CLD 23 MLTPL
HGN-300FG 2.5" - 12" CLD 23 MLTPL
HGN-FF 2" - 12" CLD 23 MLTPL
HGN-FG 2" - 12" CLD 23 MLTPL
HGNA-300FF 2.5" - 12" CLD 23 MLTPL
HGNA-300FG 2.5" - 12" CLD 23 MLTPL
HGNA-300FM 2.5" - 12" CLD 23 MLTPL
HGO-300FF 2.5" - 12" CLD 23 MLTPL
HGO-300FG 2.5" - 12" CLD 23 MLTPL
HGO-FF 2" - 12" CLD 23 MLTPL
HGO-FG 2" - 12" CLD 23 MLTPL
HGOA-300FF 2.5" - 12" CLD 23 MLTPL
HGOA-300FG 2.5" - 12" CLD 23 MLTPL

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



 
Harbin Firstline Environment Technology Co., Ltd. 
Rm1508, No.368 Changjiang Rd. Nangang
Centralized Ind. Park,Harbin Development 
Zone, Harbin Heilongjiang 150060 
China 
86 451 8657 7776
Visit this company's website


Facility : Leilongjiang, China

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Filtration Devices/Components[1] [2]
ET80-150E-20-A 6.4 L[3] CLD 23 MLTPL
ET80-150E-20-B 6.4 L[3] CLD 23 MLTPL
ET80-150E-40-A 6.4 L[3] CLD 23 MLTPL
ET80-150E-40-B 6.4 L[3] CLD 23 MLTPL
ET80-150E-60-A 6.4 L[3] CLD 23 MLTPL
ET80-150E-60-B 6.4 L[3] CLD 23 MLTPL
ET80-150S-20-A 6.4 L[3] CLD 23 MLTPL
ET80-150S-20-B 6.4 L[3] CLD 23 MLTPL
ET80-150S-40-A 6.4 L[3] CLD 23 MLTPL
ET80-150S-40-B 6.4 L[3] CLD 23 MLTPL
ET80-150S-60-A 6.4 L[3] CLD 23 MLTPL
ET80-150S-60-B 6.4 L[3] CLD 23 MLTPL
F2514-1000E-1W 1 L[4] CLD 23 MLTPL
F2514-1200E-1W 1 L[4] CLD 23 MLTPL
F2514-300E-1W 1 L[4] CLD 23 MLTPL
F2514-600E-1W 1 L[4] CLD 23 MLTPL
F2521-1000E-1W 1 L[4] CLD 23 MLTPL
F2521-1200E-1W 1 L[4] CLD 23 MLTPL
F2521-300E-1W 1 L[4] CLD 23 MLTPL
F2521-600E-1W 1 L[4] CLD 23 MLTPL
F2540-1000E-1W 1 L[4] CLD 23 MLTPL
F2540-1200E-1W 1 L[4] CLD 23 MLTPL
F2540-300E-1W 1 L[4] CLD 23 MLTPL
F2540-600E-1W 1 L[4] CLD 23 MLTPL
F40-1000E-1W 8.7 L[5] CLD 23 MLTPL
F40-1000E-2W 8.7 L[5] CLD 23 MLTPL
F40-1000E-3W 8.7 L[5] CLD 23 MLTPL
F40-1000E-4W 8.7 L[5] CLD 23 MLTPL
F40-1000E-5W 8.7 L[5] CLD 23 MLTPL
F40-1000E-6W 8.7 L[5] CLD 23 MLTPL
F40-1000S-1W 8.7 L[5] CLD 23 MLTPL
F40-1000S-2W 8.7 L[5] CLD 23 MLTPL
F40-1000S-3W 8.7 L[5] CLD 23 MLTPL
F40-1000S-4W 8.7 L[5] CLD 23 MLTPL
F40-1000S-5W 8.7 L[5] CLD 23 MLTPL
F40-1000S-6W 8.7 L[5] CLD 23 MLTPL
F40-1200E-1W 8.7 L[5] CLD 23 MLTPL
F40-1200E-2W 8.7 L[5] CLD 23 MLTPL
F40-1200E-3W 8.7 L[5] CLD 23 MLTPL
F40-1200E-4W 8.7 L[5] CLD 23 MLTPL
F40-1200E-5W 8.7 L[5] CLD 23 MLTPL
F40-1200E-6W 8.7 L[5] CLD 23 MLTPL
F40-1200S-1W 8.7 L[5] CLD 23 MLTPL
F40-1200S-2W 8.7 L[5] CLD 23 MLTPL
F40-1200S-3W 8.7 L[5] CLD 23 MLTPL
F40-1200S-4W 8.7 L[5] CLD 23 MLTPL
F40-1200S-5W 8.7 L[5] CLD 23 MLTPL
F40-1200S-6W 8.7 L[5] CLD 23 MLTPL
F40-300E-1W 8.4 L[5] CLD 23 MLTPL
F40-300E-2W 8.4 L[5] CLD 23 MLTPL
F40-300E-3W 8.4 L[5] CLD 23 MLTPL
F40-300E-4W 8.4 L[5] CLD 23 MLTPL
F40-300E-5W 8.4 L[5] CLD 23 MLTPL
F40-300E-6W 8.4 L[5] CLD 23 MLTPL
F40-300S-1W 8.4 L[5] CLD 23 MLTPL
F40-300S-2W 8.4 L[5] CLD 23 MLTPL
F40-300S-3W 8.4 L[5] CLD 23 MLTPL
F40-300S-4W 8.4 L[5] CLD 23 MLTPL
F40-300S-5W 8.4 L[5] CLD 23 MLTPL
F40-300S-6W 8.4 L[5] CLD 23 MLTPL
F40-450E-1W 8.4 L[5] CLD 23 MLTPL
F40-450E-2W 8.4 L[5] CLD 23 MLTPL
F40-450E-3W 8.4 L[5] CLD 23 MLTPL
F40-450E-4W 8.4 L[5] CLD 23 MLTPL
F40-450E-5W 8.4 L[5] CLD 23 MLTPL
F40-450E-6W 8.4 L[5] CLD 23 MLTPL
F40-450S-1W 8.4 L[5] CLD 23 MLTPL
F40-450S-2W 8.4 L[5] CLD 23 MLTPL
F40-450S-3W 8.4 L[5] CLD 23 MLTPL
F40-450S-4W 8.4 L[5] CLD 23 MLTPL
F40-450S-5W 8.4 L[5] CLD 23 MLTPL
F40-450S-6W 8.4 L[5] CLD 23 MLTPL
F40-600E-1W 8.7 L[5] CLD 23 MLTPL
F40-600E-2W 8.7 L[5] CLD 23 MLTPL
F40-600E-3W 8.7 L[5] CLD 23 MLTPL
F40-600E-4W 8.7 L[5] CLD 23 MLTPL
F40-600E-5W 8.7 L[5] CLD 23 MLTPL
F40-600E-6W 8.7 L[5] CLD 23 MLTPL
F40-600S-1W 8.7 L[5] CLD 23 MLTPL
F40-600S-2W 8.7 L[5] CLD 23 MLTPL
F40-600S-3W 8.7 L[5] CLD 23 MLTPL
F40-600S-4W 8.7 L[5] CLD 23 MLTPL
F40-600S-5W 8.7 L[5] CLD 23 MLTPL
F40-600S-6W 8.7 L[5] CLD 23 MLTPL
F80-1000E-1W 12.6 L[6] CLD 23 MLTPL
F80-1000E-2W 12.6 L[6] CLD 23 MLTPL
F80-1000E-3W 12.6 L[6] CLD 23 MLTPL
F80-1000E-4W 12.6 L[6] CLD 23 MLTPL
F80-1000E-5W 12.6 L[6] CLD 23 MLTPL
F80-1000E-6W 12.6 L[6] CLD 23 MLTPL
F80-1000E-7W 12.6 L[6] CLD 23 MLTPL
F80-1000S-1W 12.6 L[6] CLD 23 MLTPL
F80-1000S-2W 12.6 L[6] CLD 23 MLTPL
F80-1000S-3W 12.6 L[6] CLD 23 MLTPL
F80-1000S-4W 12.6 L[6] CLD 23 MLTPL
F80-1000S-5W 12.6 L[6] CLD 23 MLTPL
F80-1000S-6W 12.6 L[6] CLD 23 MLTPL
F80-1000S-7W 12.6 L[6] CLD 23 MLTPL
F80-1200E-1W 12.6 L[6] CLD 23 MLTPL
F80-1200E-2W 12.6 L[6] CLD 23 MLTPL
F80-1200E-3W 12.6 L[6] CLD 23 MLTPL
F80-1200E-4W 12.6 L[6] CLD 23 MLTPL
F80-1200E-5W 12.6 L[6] CLD 23 MLTPL
F80-1200E-6W 12.6 L[6] CLD 23 MLTPL
F80-1200E-7W 12.6 L[6] CLD 23 MLTPL
F80-1200S-1W 12.6 L[6] CLD 23 MLTPL
F80-1200S-2W 12.6 L[6] CLD 23 MLTPL
F80-1200S-3W 12.6 L[6] CLD 23 MLTPL
F80-1200S-4W 12.6 L[6] CLD 23 MLTPL
F80-1200S-5W 12.6 L[6] CLD 23 MLTPL
F80-1200S-6W 12.6 L[6] CLD 23 MLTPL
F80-1200S-7W 12.6 L[6] CLD 23 MLTPL
F80-300E-1W 12.6 L[6] CLD 23 MLTPL
F80-300E-2W 12.6 L[6] CLD 23 MLTPL
F80-300E-3W 12.6 L[6] CLD 23 MLTPL
F80-300E-4W 12.6 L[6] CLD 23 MLTPL
F80-300E-5W 12.6 L[6] CLD 23 MLTPL
F80-300E-6W 12.6 L[6] CLD 23 MLTPL
F80-300E-7W 12.6 L[6] CLD 23 MLTPL
F80-300S-1W 12.6 L[6] CLD 23 MLTPL
F80-300S-2W 12.6 L[6] CLD 23 MLTPL
F80-300S-3W 12.6 L[6] CLD 23 MLTPL
F80-300S-4W 12.6 L[6] CLD 23 MLTPL
F80-300S-5W 12.6 L[6] CLD 23 MLTPL
F80-300S-6W 12.6 L[6] CLD 23 MLTPL
F80-300S-7W 12.6 L[6] CLD 23 MLTPL
F80-450E-1W 12.6 L[6] CLD 23 MLTPL
F80-450E-2W 12.6 L[6] CLD 23 MLTPL
F80-450E-3W 12.6 L[6] CLD 23 MLTPL
F80-450E-4W 12.6 L[6] CLD 23 MLTPL
F80-450E-5W 12.6 L[6] CLD 23 MLTPL
F80-450E-6W 12.6 L[6] CLD 23 MLTPL
F80-450E-7W 12.6 L[6] CLD 23 MLTPL
F80-450S-1W 12.6 L[6] CLD 23 MLTPL
F80-450S-2W 12.6 L[6] CLD 23 MLTPL
F80-450S-3W 12.6 L[6] CLD 23 MLTPL
F80-450S-4W 12.6 L[6] CLD 23 MLTPL
F80-450S-5W 12.6 L[6] CLD 23 MLTPL
F80-450S-6W 12.6 L[6] CLD 23 MLTPL
F80-450S-7W 12.6 L[6] CLD 23 MLTPL
F80-600E-1W 12.6 L[6] CLD 23 MLTPL
F80-600E-2W 12.6 L[6] CLD 23 MLTPL
F80-600E-3W 12.6 L[6] CLD 23 MLTPL
F80-600E-4W 12.6 L[6] CLD 23 MLTPL
F80-600E-5W 12.6 L[6] CLD 23 MLTPL
F80-600E-6W 12.6 L[6] CLD 23 MLTPL
F80-600E-7W 12.6 L[6] CLD 23 MLTPL
F80-600S-1W 12.6 L[6] CLD 23 MLTPL
F80-600S-2W 12.6 L[6] CLD 23 MLTPL
F80-600S-3W 12.6 L[6] CLD 23 MLTPL
F80-600S-4W 12.6 L[6] CLD 23 MLTPL
F80-600S-5W 12.6 L[6] CLD 23 MLTPL
F80-600S-6W 12.6 L[6] CLD 23 MLTPL
F80-600S-7W 12.6 L[6] CLD 23 MLTPL

[1] Only products bearing the NSF Mark on the product, product packaging, and/or
    documentation shipped with the product are Certified.
[2] Certified for use in municipal water treatment plants only.
[3] Certified for a minimum daily flow of 30,000 liters per day.
[4] Certified for a minimum daily flow of 200 liters per day.
[5] Certified for a minimum daily flow of 500 liters per day.
[6] Certified for a minimum daily flow of 7,000 liters per day.



 
Harmsco, Inc. 
7169 49th Terrace North
Riviera Beach, FL 33407 
United States 
800-327-3248 
561-848-9628


Facility : Riviera Beach, FL

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Mechanical Devices
921-MW-HF[1] [2] D. HOT MLTPL
931-MW-HF[1] [2] D. HOT MLTPL
941-MW-HF[1] [2] D. HOT MLTPL
HMF-701[1] [2] D. HOT MLTPL
HMF-701-W[1] [2] D. HOT MLTPL
HMF-701/L-W[1] [2] D. HOT MLTPL
HMF-801-W[1] [2] D. HOT MLTPL
HMF-921-W[1] [2] D. HOT MLTPL
HMF-931-W[1] [2] D. HOT MLTPL
HMF-HB-L-W[1] [2] D. HOT MLTPL
PPFS-BB-L-M[1] [2] D. HOT MLTPL
PPFS-HC-L-M[3] >= 9 5/8 D. HOT MLTPL

[1] When ordering, part numbers with the pre-fix "X -" indicate cartridges made with an
    alternate media.
[2] Certified for use in treatment plants or distribution systems with inlet sizes of
    greater than one inch diameter and where flow rate exceeds four gallons per minute.
    Big-Blue is a registered trademark of Plymouth Products, Inc. 
    
    Trade names may contain the following designations: 
    M  - represents the Micron Rating, which is a number that can contain a decimal 
    L  - represents the Cartridge Length, which is a number 
    HT - high temperature cartridges 
    HF – non-cellulose media 
    W  - optional shrink wrapping
[3] Certified for use in water treatment plant or distribution systems with inlet sizes of
    greater than one inch diameter and where flow exceeds 3 gallons/minute.
    
    M  designates the Micron Rating. 
    HF designates non-cellulose media.

Microfiltration Devices
701-M-W[1] [2] D. HOT MLTPL
701-M/L[1] [2] D. HOT MLTPL
701-MHT[1] [2] D. HOT MLTPL
701-MW-HF [2] D. HOT MLTPL
801-M/L[1] [2] D. HOT MLTPL
801-MHT[1] [2] D. HOT MLTPL
801-MW[1] [2] D. HOT MLTPL
801-MW-HF [2] D. HOT MLTPL
921-M[1] [2] D. HOT MLTPL
931-M[1] [2] D. HOT MLTPL
EZ Clean Cartridges[3] >= 9 5/8" D. HOT MLTPL
FIL-08530[3] >= 9 5/8" D. HOT MLTPL
FIL-08531[3] >= 9 5/8" D. HOT MLTPL
FIL-08541[3] >= 9 5/8" D. HOT MLTPL
HB-10-LT2-W-MUNI [2] D. HOT MLTPL
HB-20-LT2-W-MUNI [2] D. HOT MLTPL
HB-L-MW[1] [2] D. HOT MLTPL
HB-L-MW-HF [2] D. HOT MLTPL
HC/170-AC-5[1] [3] >= 9 5/8" D. HOT MLTPL
HC/170-LT2[3] >= 9 5/8" D. HOT MLTPL
HC/170-M[1] [3] >= 9 5/8" D. HOT MLTPL
HC/170-M-HF[3] >= 9 5/8" D. HOT MLTPL
HC/40-AC-5[1] [3] >= 9 5/8" D. HOT MLTPL
HC/40-LT2[3] >= 9 5/8" D. HOT MLTPL
HC/40-M[1] [3] >= 9 5/8" D. HOT MLTPL
HC/40-M-HF[3] >= 9 5/8" D. HOT MLTPL
HC/90-AC-5[1] [3] >= 9 5/8" D. HOT MLTPL
HC/90-LT2[3] >= 9 5/8" D. HOT MLTPL
HC/90-M[1] [3] >= 9 5/8" D. HOT MLTPL
HC/90-M-HF[3] >= 9 5/8" D. HOT MLTPL
HMF- 701-W [2] D. HOT MLTPL
HMF-170-W >= 9 5/8" D. HOT MLTPL
HMF-40-W >= 9 5/8" D. HOT MLTPL
HMF-701/20-W [2] D. HOT MLTPL
HMF-701/30-W [2] D. HOT MLTPL
HMF-701/40-W [2] D. HOT MLTPL
HMF-801-W [2] D. HOT MLTPL
HMF-801/10-W [2] D. HOT MLTPL
HMF-801/20-W [2] D. HOT MLTPL
HMF-801/30-W [2] D. HOT MLTPL
HMF-801/40-W [2] D. HOT MLTPL
HMF-90-W >= 9 5/8" D. HOT MLTPL
HMF-921-W [2] D. HOT MLTPL
HMF-931-W [2] D. HOT MLTPL
HMF-941-W [2] D. HOT MLTPL
HMF-HB-10-SS-W [2] D. HOT MLTPL
HMF-HB-10-W [2] D. HOT MLTPL
HMF-HB-20-SS-W [2] D. HOT MLTPL
HMF-HB-20-W [2] D. HOT MLTPL
Harmsco® Calypso Blue™ Filter Cartridges for Big-Blue Housings [2] [4] D. HOT MLTPL
Harmsco® Filter Cartridges [2] D. HOT MLTPL
Harmsco® Hurricane™ Filter Cartridges[3] >= 9 5/8" D. HOT MLTPL
Harmsco® Poly-Pleat™ Filter Cartridges (PP-S-1, PP-D-1, PP-T-1, PP-20E-1) [2] D. HOT MLTPL
Harmsco® Poly-Pleat™ Filter Cartridges for Big-Blue Housings [2] [4] D. HOT MLTPL
Harmsco® Poly-Pleat™ Filter Cartridges for Harmsco® Hurricane™ Filter Housings [3] D. HOT MLTPL
PP-BB-L-M [2] D. HOT MLTPL
WB-921-M[1] [2] D. HOT MLTPL
WB-931-M[1] [2] D. HOT MLTPL
WB-M[1] [2] D. HOT MLTPL
WB-MW[1] [2] D. HOT MLTPL
WaterBetter® Filter Cartridges [2] D. HOT MLTPL

[1] When ordering, part numbers with the pre-fix "X -" indicate cartridges made with an
    alternate media.
[2] Certified for use in treatment plants or distribution systems with inlet sizes of
    greater than one inch diameter and where flow rate exceeds four gallons per minute.
    Big-Blue is a registered trademark of Plymouth Products, Inc. 
    
    Trade names may contain the following designations: 
    M  - represents the Micron Rating, which is a number that can contain a decimal 
    L  - represents the Cartridge Length, which is a number 
    HT - high temperature cartridges 
    HF – non-cellulose media 
    W  - optional shrink wrapping
[3] Certified for use in water treatment plant or distribution systems with inlet sizes of
    greater than one inch diameter and where flow exceeds 3 gallons/minute.
    
    M  designates the Micron Rating. 
    HF designates non-cellulose media.
[4] Big-Blue is a registered trademark of Plymouth Products, Inc.

Miscellaneous Treatment Devices/Components
HIF 3X170FL T-316L >=13.5 gal D. HOT MLTPL
HIF 3X170FL T-316L Coat >=13.5 gal D. HOT MLTPL
HIF 5X170FL T-316L >=13.5 gal D. HOT MLTPL
HIF 5X170FL T-316L Coat >=13.5 gal D. HOT MLTPL
Harmsco® HIF Up-Flow Filters[5] [G] >= 5.5 gal. D. HOT MLTPL
Harmsco® HIF Up-Flow Filters[6] >= 29.5 gal. CLD 23 MLTPL
Harmsco® HIF Up-Flow Filters HIF-14[5] [G] 8.5 gal. D. HOT MLTPL
Harmsco® HIF Up-Flow Filters HIF-16[5] [G] 8.3 gal D. HOT MLTPL
Harmsco® HIF Up-Flow Filters HIF-21[5] [G] 11.8 gal. D. HOT MLTPL
Harmsco® HIF Up-Flow Filters HIF-24[5] [G] 11.75 gal. D. HOT MLTPL
Harmsco® HIF Up-Flow Filters HIF-7[5] [G] 5.2 gal. D. HOT MLTPL
Harmsco® Hurricane™ Filter Housing[5] [G] >= 13.5 gal. D. HOT MLTPL
Harmsco® Hurricane™ Filter Housing - HUR 12X170FL-XXX[7] [8] 1620 L CLD 23 MLTPL
Harmsco® Hurricane™ Filter Housing - HUR 16X170FL-XXX[7] [8] 2036 L CLD 23 MLTPL
Harmsco® Hurricane™ Filter Housing - HUR 1X170FL-XXX[7] [8] 90 L CLD 23 MLTPL
Harmsco® Hurricane™ Filter Housing - HUR 3X170FL-XXX[7] [8] 160 L CLD 23 MLTPL
Harmsco® Hurricane™ Filter Housing - HUR 5X170FL-XXX[7] [8] 450 L CLD 23 MLTPL
Harmsco® Hurricane™ Filter Housing - HUR 8X170FL-XXX[7] [8] 660 L CLD 23 MLTPL
Harmsco® Hurricane™ Filter Housing - MUNI-1-2FL-XXX[7] [8] 90 L CLD 23 MLTPL
Harmsco® Hurricane™ Filter Housing - MUNI-12-10FL-XXX[7] [8] 1620 L CLD 23 MLTPL
Harmsco® Hurricane™ Filter Housing - MUNI-16-12FL-XXX[7] [8] 2036 L CLD 23 MLTPL
Harmsco® Hurricane™ Filter Housing - MUNI-3-3FL-XXX[7] [8] 160 L CLD 23 MLTPL
Harmsco® Hurricane™ Filter Housing - MUNI-5-4FL-XXX[7] [8] 450 L CLD 23 MLTPL
Harmsco® Hurricane™ Filter Housing - MUNI-8-6FL-XXX[7] [8] 660 L CLD 23 MLTPL
Harmsco® Hurricane™ Filter Housings HUR 170 HP-316[5] [G] >= 13.5 gal. D. HOT MLTPL
Harmsco® Hurricane™ Filter Housings HUR 170-HP[5] [G] 20.9 gal. D. HOT MLTPL
Harmsco® Hurricane™ Filter Housings HUR 40 HP-316[5] [G] 8.8 gal. D. HOT MLTPL
Harmsco® Hurricane™ Filter Housings HUR 40-HP[5] [G] 8.8 gal. D. HOT MLTPL
Harmsco® Hurricane™ Filter Housings HUR 90 HP-316[5] [G] 14.8 gal. D. HOT MLTPL
Harmsco® Hurricane™ Filter Housings HUR-90-HP[5] [G] 14.8 gal. D. HOT MLTPL
Harmsco® Hurricane™ Filter Housings Muni 170 MP[5] [G] 20.9 gal. D. HOT MLTPL
Harmsco® Hurricane™ Filter Housings Muni 40 MP[5] [G] 8.8 gal. D. HOT MLTPL
Harmsco® Hurricane™ Filter Housings Muni 40 MP-316[5] [G] 8.8 gal. D. HOT MLTPL
Harmsco® Hurricane™ Filter Housings Muni 90 MP[5] [G] 14.8 gal. D. HOT MLTPL
Harmsco® Hurricane™ Muni Filter Housings 170 MP-316[5] [G] 20.9 gal. D. HOT MLTPL
Harmsco® Hurricane™ Muni Filter Housings 90 MP-316[5] [G] 14.8 gal. D. HOT MLTPL
Harmsco® Involute™ Filter Housing - INV-72-8FL[7] 1181 L CLD 23 MLTPL
Harmsco® Involute™ Filter Housing - INV-72-8FL-2[7] 1181 L CLD 23 MLTPL
Harmsco® Waterbetter™ Filter Housings[5] [G] >= 13.5 gal. D. HOT MLTPL
Harmsco® Waterbetter™ Filters WB170SC-2[5] [G] 20.9 gal. D. HOT MLTPL
Harmsco® Waterbetter™ Filters WB40SC-2[5] [G] 8.8 gal. D. HOT MLTPL
Harmsco® Waterbetter™ Filters WB90SC-2[5] [G] 14.8 gal. D. HOT MLTPL
WB5X170FL[5] [G] >= 13.5 gal. D. HOT MLTPL
WB5X170FL COAT[5] [G] >= 13.5 gal. D. HOT MLTPL

[5] Evaluated for use in a water treatment facility or distribution systems with inlet sizes
    of greater than one-inch diameter and where flow exceeds 3 gallons/minute.  Trade names
    refer to the housing only. Approved filter elements include HC/170-M or EZ-CLEAN by
    Harmsco, or other NSF/ANSI/CAN 61 Certified cartridges meeting the size and minimum flow
    requirements.
[6] Certified for Harmsco® HIF Up-Flow Filter models: HIF-42, HIF-75, HIF-100, HIF-150-FL
    and HIF-200-FL.  Certified for use in a water treatment facility or distribution systems
    with inlet sizes of greater than one-inch diameter and where flow exceeds 3
    gallons/minute.
[7] Certification is for use in a water treament facility or distribution system with inlet
    sizes greater than 1" diameter and with a minimum flow of 3 gallons/minute (16,000
    liters/day).
    Trade names refer to the housing only. Approved filter elements include HC/170-M or
    EZ-CLEAN by Harmsco, or other NSF/ANSI/CAN 61 Certified cartridges meeting the size and
    minimum flow requirements. These housings are not intended for use with cartridges above
    the Listed water contact temperature.
[8] XXX - Optional trade names suffixes may be combined in various ways to designate the
    following:
    304/304L, 316/316L - indicates the grade of stainless steel from which the housing is
    made
    HP   - High pressure housing
    DPLX - Housing is made from SS 2205
    XP   - Standard housing
    XXP  - Extreme Pressure Housing
    U    - Housing is ASME U-Stamped
    M    - Housing has the inlet and outlet on the same side
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



 
Harrington Industrial Plastics LLC 
14480 Yorba Avenue
Chino, CA 91710 
United States 
909-576-8641


Facility : Glasgow, DE

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Microfiltration Devices
HVV Series Melt Blown Filter Cartridges [A]-[B][C][1] [2] CLD 23 MLTPL

[1] A - Retention rating (0.5 - 75 microns)
    B - Length (5" - 40")
    C - End configuration
[2] Models 20" and smaller are evaluated to point-of-entry use.
    Models larger than 20" are certified for a minimum daily flow rate of 2880 gallons.



 
Hays Fluid Controls - Division of Romac Industries, Inc. 
114 Eason Road
P.O. Box 580 
Dallas, NC 28034-0580 
United States 
800-354-4297 
704-922-9565
Visit this company's website


Facility : Dallas, NC

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Valves[G]
Mesurflo® 2517 LF 1/2 - 3/4" D. HOT MLTPL

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



 
Hayward Industries, Inc. - Flow Control Division 
One Hayward Industrial Drive
Clemmons, NC 27012 
United States 
800-429-4635 
336-712-9900
Visit this company's website


Facility : # 1 China

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Valves[G]
Hayward Series BYCN Butterfly Valve BYCN1020E1LGB 2" CLD 23 MLTPL
Hayward Series BYCN Butterfly Valve BYCN1025E1LGB 2 1/2" CLD 23 MLTPL
Hayward Series BYCN Butterfly Valve BYCN1030E1LGB 3" CLD 23 MLTPL
Hayward Series BYCN Butterfly Valve BYCN1040E1LGB 4" CLD 23 MLTPL
Hayward Series BYCN Butterfly Valve BYCN1050E1LGB 5" CLD 23 MLTPL
Hayward Series BYCN Butterfly Valve BYCN1060E1LGB 6" CLD 23 MLTPL
Hayward Series BYCN Butterfly Valve BYCN1080E1LGB 8" CLD 23 MLTPL

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



Facility : Clemmons, NC

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Miscellaneous Process Devices/Components[1] [2] [G]
Bulkhead Fittings BFA1(XXX)(Y)ES 4" - 6" CLD 23 MLTPL

[1] Certified for use in tanks 1,200 gallons and greater.
[2] BFA Series Bulkhead Fitting descriptors:
    (XXX) Indicates size:
          040 - 4"
          060 - 6"
    (Y) Indicates end connection:
        C – Socket x Thread
        S – Socket x Socket
        T – Thread x Thread
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

Valves[G]
BY Series Butterfly Valves (PVC/EPDM) 1 1/2" - 12" CLD 23 MLTPL
BYV Series Butterfly Valve (CPVC/EPDM) 4" - 12" D. HOT MLTPL
BYV Series Butterfly Valve (PVC/EPDM) 1 1/2" - 12" CLD 23 MLTPL

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



Facility : Jiangsu Province, China

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Miscellaneous Process Devices/Components [G]
Bulkhead Fittings BFA1[XXX][Y]ES[1] [2] 1/2" - 3" CLD 23 MLTPL
Bulkhead Fittings BFAS1[XXX][Y]ES[1] [2] 1/2" - 3" CLD 23 MLTPL

[1] Certified for use in tanks 20 gallons and greater.
[2] BFA and BFAS Series Bulkhead Fitting descriptors: 
    XXX - Indicates size: 
          005 - 1/2" 
          007 - 3/4" 
          010 - 1" 
          012 - 1 1/4" 
          015 - 1 1/2" 
          020 - 2"
          030 - 3"  
    Y   - Indicates end connection: 
          C – Socket x Thread 
          T – Thread x Thread 
          S – Socket x Socket
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



 
Hengshui Snowate Environmental Technology Co., Ltd. 
Renmin Road, Taocheng District
Hengshui, 13 053000 
China 
8615030811699
Visit this company's website


Facility : Chongqing, China

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Ultrafiltration Devices
SWUF7847-40 8" x 40" CLD 23 MLTPL
SWUF7862-55 8" x 60" CLD 23 MLTPL
SWUF9862-75 10" x 60" CLD 23 MLTPL
SWUFD8964-51 9" x 70" CLD 23 MLTPL
SWUFD8983-77 9" x 90" CLD 23 MLTPL
SWUFH9863-78 10" x 70" CLD 23 MLTPL
SWUFH9883-105 10" x 90" CLD 23 MLTPL
SWUFS7069-55 7" x 80" CLD 23 MLTPL

[1] SWUF9862-75 is flushed for 100 minutes with tap water at a rate of 7 gpm.	
    SWUFH9863-78 is flushed for 116 minutes with tap water at a rate of 7 gpm.	
    SWUFH9883-105 is flushed for 150 minutes with tap water at a rate of 7 gpm.	
    SWUF7847-40 is flushed for 60 minutes with tap water at a rate of 7 gpm.	
    SWUF7862-55 is flushed for 70 minutes with tap water at a rate of 7 gpm.	
    SWUFD8964-51 is flushed for 104 minutes with tap water at a rate of 7 gpm.	
    SWUFD8983-77 is flushed for 133 minutes with tap water at a rate of 7 gpm.	
    SWUFS7069-55 is flushed for 65 minutes with tap water at a rate of 7 gpm.
[2] SWUF9862-75 and MSFUF1060CA are certified for a minimum daily flow of 36,000 liters.		
    SWUFH9863-78 is certified for a minimum daily flow of 42,000 liters.		
    SWUFH9883-105 is certified for a minimum daily flow of 54,000 liters.		
    SWUF7847-40 is certified for a minimum daily flow of 12,000 liters.		
    SWUF7862-55 is certified for a minimum daily flow of 24,000 liters.		
    SWUFD8964-51 is certified for a minimum daily flow of 37,800 liters.		
    SWUFD8983-77 is certified for a minimum daily flow of 48,600 liters.		
    SWUFS7069-55 is certified for a minimum daily flow of 11,000 liters.


 
Hengshui Snowate Environmental Technology Co., Ltd. 
Renmin Road, Taocheng District
Hengshui City, Hebei province 
China 
15030811699


Facility : # 1 China

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Components, POE: Tanks, Water Softener
FRP Pressure Vessel Tank SWTK Series >=83.5Gal CLD 23 MLTPL
FRP Pressure Vessel Tank SWTK-H Series >=83.5Gal CLD 23 MLTPL
FRP Pressure Vessel Tank SWTK-S Series >= 6.3 L CLD 23 MLTPL



 
Henry Pratt Company, LLC 
401 South Highland Avenue
Aurora, IL 60506 
United States 
630-844-4000


Facility : # 1 China

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Valves[1]
BF-8668 2"-48" CLD 23 MLTPL
BF-8688 2"-48" CLD 23 MLTPL
BF-8768 2"-48" CLD 23 MLTPL
BF-8788 2"-48" CLD 23 MLTPL
BF-8868 2"-48" CLD 23 MLTPL
BF-8888 2"-48" CLD 23 MLTPL

[1] Certified for equivalent metric sizes.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



 
Hershey Valve Company, Ltd. 
No. 16 Jing 2nd Road
Wuchi Town, Taichung 435 
Taiwan 
886 42 639 2777
Visit this company's website


Facility : # 1 Jiangsu, China

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Valves[G]
VP-640F PVC Double Union Ball Valve 1/2" - 2" CLD 23 MLTPL
VP-641F 1/2" - 2" CLD 23 MLTPL

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



Facility : Taichung, Taiwan

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Valves[G]
VP-640F PVC Double Union Ball Valve 1/2" - 4" CLD 23 MLTPL
VP-641F CPVC Double Union Ball Valves 1/2" - 4" CLD 23 MLTPL

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



 
HIPPOVALVE CO., LTD. 
No.17, Ln.29, Sanying Rd., Yingge Dist
New Taipei City 239 
Taiwan 
886 2 3501-2626
Visit this company's website


Facility : New Taipei City, Taiwan

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Valves[G]
High Performance butterfly valve - V-TYPE (Lug) 2" - 36" CLD 23 MLTPL
High Performance butterfly valve - V-TYPE (Wafer) 2" - 36" CLD 23 MLTPL

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



 
HODA VIETNAM TECHNOLOGY DEVELOPMENT COMPANY LIMITED 
No. A03, Lot CN8-1B, Nam Dinh Vu Non-tariff and
Industrial Park (Zone 1)  
Dong Hai 2 Ward, Hai An District  
Hai Phong,  
Vietnam 
400 168 2128  
400 168 2128


Facility : Hai Phong, Vietnam

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Ball Valves
Compact Ball Valve w/EPDM O-ring Seal(FIPT × FIPT) 1/2" CLD 23 MLTPL
Compact Ball Valve w/EPDM O-ring Seal(FIPT × FIPT) 3/4" CLD 23 MLTPL
Compact Ball Valve w/EPDM O-ring Seal(FIPT × FIPT) 1" CLD 23 MLTPL
Compact Ball Valve w/EPDM O-ring Seal(FIPT × FIPT) 1-1/4" CLD 23 MLTPL
Compact Ball Valve w/EPDM O-ring Seal(FIPT × FIPT) 1-1/2" CLD 23 MLTPL
Compact Ball Valve w/EPDM O-ring Seal(FIPT × FIPT) 2" CLD 23 MLTPL
Compact Ball Valve w/FKM O-ring Seal(FIPT × FIPT) 1/2" CLD 23 MLTPL
Compact Ball Valve w/FKM O-ring Seal(FIPT × FIPT) 3/4" CLD 23 MLTPL
Compact Ball Valve w/FKM O-ring Seal(FIPT × FIPT) 1" CLD 23 MLTPL
Compact Ball Valve w/FKM O-ring Seal(FIPT × FIPT) 1-1/4" CLD 23 MLTPL
Compact Ball Valve w/FKM O-ring Seal(FIPT × FIPT) 1-1/2" CLD 23 MLTPL
Compact Ball Valve w/FKM O-ring Seal(FIPT × FIPT) 2" CLD 23 MLTPL
Compact Ball Valve w/FKM O-ring Seal(SOC × SOC) 1/2" CLD 23 MLTPL
Compact Ball Valve w/FKM O-ring Seal(SOC × SOC) 3/4" CLD 23 MLTPL
Compact Ball Valve w/FKM O-ring Seal(SOC × SOC) 1" CLD 23 MLTPL
Compact Ball Valve w/FKM O-ring Seal(SOC × SOC) 1-1/4" CLD 23 MLTPL
Compact Ball Valve w/FKM O-ring Seal(SOC × SOC) 1-1/2" CLD 23 MLTPL
Compact Ball Valve w/FKM O-ring Seal(SOC × SOC) 2" CLD 23 MLTPL

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.


 
Hollingsworth & Vose Company 
112 Washington Street
East Walpole, MA 02032 
United States 
508-668-0295


Facility : Floyd, VA

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Miscellaneous Process Devices/Components
PC14100F[1] <= 500 sq. in./L CLD 23 MLTPL
PF12050[1] <= 500 sq. in./L CLD 23 MLTPL
PF12100[1] <= 500 sq. in./L CLD 23 MLTPL
PF13025[1] <= 500 sq. in./L CLD 23 MLTPL
PF13032[1] <= 500 sq. in./L CLD 23 MLTPL
PF13040[1] <= 500 sq. in./L CLD 23 MLTPL
PF13150[1] <= 500 sq. in./L CLD 23 MLTPL

[1] Product Certified for a minimum flow of 140 gallons per day at the surface area listed
    under size.



 
Homestead Valves 
160 West Walnut Street
Allentown, PA 18102 
United States 
610-770-1100


Facility : Tianjin, China

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Valves[G]
AWWA C504 ButterflyValve-820 4" - 72" CLD 23 MLTPL
AWWA C504 ButterflyValve-821 4" - 72" CLD 23 MLTPL
AWWA C504 ButterflyValve-840 4" - 72" CLD 23 MLTPL
AWWA C504 ButterflyValve-841 4" - 72" CLD 23 MLTPL

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



 
Honeywell 
208 South Rogers Lane
Raleigh, NC 27610 
United States 
44 1582 846400
Visit this company's website


Facility : Nagoya, Japan

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Water Meters[1] [G]
evoQ4 LowFlow [2] CLD 23 MLTPL

[1] Product also complies with NSF/ANSI 372.
[2] Certified for the following sizes:
    1.5" x 13" overall length
    2" x 10" overall length
    2" x 15.25" overall length
    2" x 17" overall length
[3] Certified for the following sizes:
    1.5" x 13" overall length
    2" x 10" overall length
    3" x 12" overall length
    4" x 14" overall length
    6" x 18" overall length
    8" x 20" overall length
    10" x 18" overall length
    12" x 20" overall length
[4] Certified for the following sizes:
    1.5" x 13" overall length
    2" x 10" overall length
    2" x 15.25" overall length
    2" x 17" overall length
    3" x 12" overall length
    4" x 14" overall length
    6" x 18" overall length
    8" x 20" overall length
    10" x 18" overall length
    12" x 20" overall length
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



 
Honeywell International Inc. 
315 East Stephenson Street
Freeport, IL 61032 
United States 
815-618-6279


Facility : Chihuahua, Mexico

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Transmitters/Gauges[1] [G]
Media Isolate Pressure Sensor with 1/4" 45° Female Shrader Port 1/4" CLD 23 MLTPL

[1] MIPS Pressure Transducer Naming
    MIP-X-XX-X-X-XXXX-X-XX-X
    First X - Connector Type
    A - Metri-Pack 150 Series
    C – DIN-C standard
    D – Digital Output with cable
    E - Cable, 1.0 m length
    F - Cable, 2.0 m length
    G – Cable harness for CH output transfer function 3m length
    H – Cable harness for CH output transfer function 5m length
    K – Cable, 0.5m length
    Second and Third X - Pressure Connection
    F1 - 1/4-in 45-degree Female Schrader
    G1 - G 1/4 A -G
    G2 - G 1/4 A -L
    G3 - G 1/8-28 BSSP
    M1 - M12 x 1.5
    M3 – M14 x 1.5
    N1 - 1/4-18 NPT
    N2 - 1/8-27 NPT
    R1 – R1/4-19 BSPT
    R2 – R1/8-28 BSPT
    S1 – 9/16-18 UNF
    S2 – 7/16-20 UNF
    S3 – 3/8-24 UNF
    Fourth and Fifth X - Not Defined
    Sixth thru Ninth X - Four Digit Alpha-Numeric Code For Pressure Range (bar or PSI)
    Tenth X - Pressure Reference
    A - Absolute
    S - Sealed Gage (only available at or above 100 psi or 8 bar)
    Eleventh and Twelfth X - Output Type
    AA – Ratiometric: 5.0V Vs: 10% to 90%
    AD – Ratiometric: 5.0 Vs: 10% to 90% Vs
    CH – Current: 4mA to 20mA
    BC – Regulated: 1Vdc to 6Vdc
    BD – Regulated: 0.25Vdc to 10.25Vdc
    BE – Regulated: 0.5Vdc to 4.5Vdc
    BG – Regulated: 1Vdc to 5Vdc
    DA – IC Digital output 
    DB – SPI Digital output
    Thirteenth X – Special
    X – No selection 
    L – Load dump protection (for regulated output with cable harness only)
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



 
HSCMT Co., Ltd. 
103 16-25, Dongbaekjungang-ro,16beon-gil
Yongin-si, Gyeonggi-do 17015 
Republic of Korea 
1588 4902 
82 31 702 4910
Visit this company's website


Facility : Yongin, Republic of Korea

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Water Meters[G]
MF-1100 DN100 100 mm D. HOT MLTPL
MF-1100 DN1000 1000 mm D. HOT MLTPL
MF-1100 DN125 125 mm D. HOT MLTPL
MF-1100 DN150 150 mm D. HOT MLTPL
MF-1100 DN200 200 mm D. HOT MLTPL
MF-1100 DN250 250 mm D. HOT MLTPL
MF-1100 DN300 300 mm D. HOT MLTPL
MF-1100 DN350 350 mm D. HOT MLTPL
MF-1100 DN400 400 mm D. HOT MLTPL
MF-1100 DN450 450 mm D. HOT MLTPL
MF-1100 DN50 50 mm D. HOT MLTPL
MF-1100 DN500 500 mm D. HOT MLTPL
MF-1100 DN600 600 mm D. HOT MLTPL
MF-1100 DN65 65 mm D. HOT MLTPL
MF-1100 DN700 700 mm D. HOT MLTPL
MF-1100 DN80 80 mm D. HOT MLTPL
MF-1100 DN800 800 mm D. HOT MLTPL
MF-1100 DN900 900 mm D. HOT MLTPL

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



 
HT CONNECT GmbH & Co. KG 
Norisstraße 4
Pegnitz 91257 
Germany 
49 9241-9109100


Facility : Zhejiang, China

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Valves
Kugelhahn single union 2fach Klebemuffe 1/2" - 4" CLD 23 MLTPL
PVC-U Kugelhahn 2fach Innengewinde 1/2" - 4" CLD 23 MLTPL
PVC-U Kugelhahn 2fach Innengewinde 1/2" - 4" CLD 23 MLTPL
PVC-U Kugelhahn 2fach Klebemuffe 1/2" - 4" CLD 23 MLTPL
PVC-U Kugelhahn COMPACT 2fach Klebemuffe 1/2" - 4" CLD 23 MLTPL



 
Hubbell Gas Utility Solutions, Inc. 
21808 East Highway 51
Broken Arrow, OK 74014 
United States 
918-258-1566


Facility : Broken Arrow, OK

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Tapping Sleeves/Service Saddles
SUPER FASTTAP >= 1" CLD 23 MLTPL
FASTTAP >= 1" CLD 23 MLTPL
Continental Fasttap Assembly >= 1" CLD 23 MLTPL
Super Fasttap Saddle Assemblies >= 1" CLD 23 MLTPL



 
Hunan Ovay Technology Co., Ltd. 
Huoju Road IV, Liyu Zone
Tianyuan District 
Zhuzhou, Hunan Province 412000 
China 
86 731 2286 6639
Visit this company's website


Facility : Zhuzhou, China

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Filtration Devices/Components[1] [2] [3]
FDRO-8038 8" x 40" CLD 23 MLTPL
HSRO-8040 8" x 40" CLD 23 MLTPL
HTRO-8040 8" x 40" CLD 23 MLTPL
OP5-10 8" x 40" CLD 23 MLTPL
OP5-10LE 8" x 40" CLD 23 MLTPL
OP5-20 8" x 40" CLD 23 MLTPL
OP5-30 8" x 40" CLD 23 MLTPL
OP5-30MAX 8" x 40" CLD 23 MLTPL
OV-FR-4040 4" x 40" CLD 23 MLTPL
OV-FR-8040 8" x 40" CLD 23 MLTPL
OV-L-2540 2 1/2"x 40" CLD 23 MLTPL
OV-L-4021 4" x 21" CLD 23 MLTPL
OV-L-4040 4" x 40" CLD 23 MLTPL
OV-L-8040 8" x 40" CLD 23 MLTPL
OV-NF-8040 8" x 40" CLD 23 MLTPL
OV-SW-2514 2.5" x 14" CLD 23 MLTPL
OV-SW-2521-LE 2 1/2" x 21" CLD 23 MLTPL
OV-SW-2540-LE 2 1/2"x 40" CLD 23 MLTPL
OV-SW-4040 4" x 40" CLD 23 MLTPL
OV-SW-4040-HR 4" x 40" CLD 23 MLTPL
OV-SW-8040 8" x 40" CLD 23 MLTPL
OV-SW-8040 FR 8" x 40" CLD 23 MLTPL
OV-SW-8040-HR 8" x 40" CLD 23 MLTPL
OV-SW-8040-LE 8" x 40" CLD 23 MLTPL
OV-SW-8040-XHR 8" x 40" CLD 23 MLTPL
OV-SW-8040-XLE 8" x 40" CLD 23 MLTPL
OV-U-2521 2 1/2" x 21" CLD 23 MLTPL
OV-U-2521-HF 2 1/2" x 21" CLD 23 MLTPL
OV-U-2540 2.5" x 40" CLD 23 MLTPL
OV-U-2540-HF 2 1/2"x 40" CLD 23 MLTPL
OV-U-4014 4" x 14" CLD 23 MLTPL
OV-U-4021-HF 4" x 21" CLD 23 MLTPL
OV-U-4021-HR 4" x 21" CLD 23 MLTPL
OV-U-4040 4" x 40" CLD 23 MLTPL
OV-U-4040-HF 4" x 40" CLD 23 MLTPL
OV-U-4040-HR 4" x 40" CLD 23 MLTPL
OV-U-8040 8" x 40" CLD 23 MLTPL
OV-U-8040-HF 8" x 40" CLD 23 MLTPL
OV-U-8040-HR 8" x 40" CLD 23 MLTPL
OV-X-2514 2 1/2" x 14" CLD 23 MLTPL
OV-X-2521 2 1/2" x 21" CLD 23 MLTPL
OV-X-2540 2 1/2"x 40" CLD 23 MLTPL
OV-X-4014 4" x 14" CLD 23 MLTPL
OV-X-4021 4" x 21" CLD 23 MLTPL
OV-X-4040 4" x 40" CLD 23 MLTPL
OV-X-4611 4 3/5" x 11" CLD 23 MLTPL
OV-X-8040 8" x 40" CLD 23 MLTPL
SG440-LE 8" x 40" CLD 23 MLTPL

[1] Products have the following minimum daily flow:
    OV-U-8040-HF - 10000 gallons
    OV-U-8040-HR - 10000 gallons
    OV-U-8040    - 10000 gallons
    OV-L-8040    - 9600 gallons
    OV-FR-8040   - 9600 gallons
    OV-U-4040-HF - 2700 gallons
    OV-U-4040-HR - 1900 gallons
    OV-U-4040    - 2400 gallons
    OV-L-4040    - 2400 gallons
    OV-FR-4040   - 2200 gallons
    OV-U-4021-HF - 1000 gallons
    OV-U-4021-HR - 850 gallons
    OV-SW-4040   - 1600 gallons
    OV-SW-2514   - 130 gallons
    OV-SW-8040   - 7800 gallons
    OV-X-2514:280 gallons
    OV-X-4014:600 gallons
    OV-X-4611:1300 gallons
    OV-X-2540:850 gallons
    OV-X-4021:1000 gallons
    OV-X-2521:500 gallons
    OV-X-4040:2600 gallons
    OV-X-8040:12,000 gallons
    OV-U-2521:300 gallons
    OV-U-2521-HF:315 gallons
    OV-U-4014:600 gallons
    OV-U-2540-HF:750 gallons
    OV-U-2540:750 gallons
    OV-L-2540:750 gallons
    OV-L-4021:1150 gallons
    OV-SW-2521-LE:290 gallons
    OV-SW-2540-LE:600 gallons
    OV-SW-4040-HR:1600 gallons
    OV-SW-8040-HR:7500 gallons
    OV-SW-8040-XHR:7000 gallons
    OV-SW-8040-LE :9000 gallons
    OV-SW-8040 FR:7500 gallons
    OV-SW-8040-XLE:9500 gallons
    OV-NF-8040:9000 gallons
    HTRO-8040:9000 gallons
    HSRO-8040:9000 gallons
    FDRO-8038:8500 gallons
    SG440-LE:13,000 gallons
    OP5-10:11,500 gallons
    OP5-10LE:12,500 gallons
    OP5-20:11,000 gallons
    OP5-30: 10,500 gallons
    OP5-30MAX:12,000 gallons
    
[2] Product requires a 1 hour deionized water flush at various flow rates and pressures
    depending on the model:
    OV-U-8040-HF - 61.11 gpm at 150 PSI
    OV-U-8040-HR - 48.61 gpm at 150 PSI
    OV-U-8040    - 56.02 gpm at 150 PSI
    OV-L-8040    - 44.44 gpm at 225 PSI
    OV-FR-8040   - 44.44 gpm at 225 PSI
    OV-U-4040-HF - 12.50 gpm at 150 PSI
    OV-U-4040-HR - 8.80 gpm at 150 PSI
    OV-U-4040    - 11.11 gpm at 150 PSI
    OV-L-4040    - 11.11 gpm at 225 PSI
    OV-FR-4040   - 10.19 gpm at 225 PSI
    OV-U-4021-HF - 8.68 gpm at 150 PSI
    OV-U-4021-HR - 73.78 gpm at 150 PSI
    OV-SW-4040   - 13.89 gpm at 800 PSI
    OV-SW-2514   - 4.51 gpm at 800 PSI
    OV-SW-8040   - 67.71 gpm at 800 PSI
    OV-X-2514:1.3 gpm at 100 PSI
    OV-X-4014:2.78 gpm at 100 PSI
    OV-X-4611:6.02 gpm at 100 PSI
    OV-X-2540:3.94 gpm at 100 PSI
    OV-X-4021:4.63 gpm at 100 PSI
    OV-X-2521:2.31 gpm at 100 PSI
    OV-X-4040:12.04 gpm at 100 PSI
    OV-X-8040:55.55 gpm at 100 PSI
    OV-U-2521:1.39 gpm at 150 PSI
    OV-U-2521-HF:1.46 gpm at 150 PSI
    OV-U-4014:2.78 gpm at 150 PSI
    OV-U-2540-HF:3.47 gpm at 150 PSI
    OV-U-2540:3.47 gpm at 150 PSI
    OV-L-2540:3.47 gpm at 225 PSI
    OV-L-4021:5.32 gpm at 225 PSI
    OV-SW-2521-LE:2 1/2"2 gpm at 800 PSI
    OV-SW-2540-LE:5.21 gpm at 800 PSI
    OV-SW-4040-HR:13.89 gpm at 800 PSI
    OV-SW-8040-HR:65.1 gpm at 800 PSI
    OV-SW-8040-XHR:60.76 gpm at 800 PSI
    OV-SW-8040-LE :78.13 gpm at 800 PSI
    OV-SW-8040 FR:65.1 gpm at 800 PSI
    OV-SW-8040-XLE:82.47 gpm at 800 PSI
    OV-NF-8040:41.67 gpm at 70 PSI
    HTRO-8040:41.67 gpm at 225 PSI
    HSRO-8040:41.67 gpm at 225 PSI
    FDRO-8038:39.35 gpm at 150 PSI
    SG440-LE:60.19 gpm at 150 PSI
    OP5-10:53.24 gpm at 225 PSI
    OP5-10LE:57.87 gpm at 225 PSI
    OP5-20:50.93 gpm at 225 PSI
    OP5-30:48.61 gpm at 150 PSI
    OP5-30MAX: 55.56 gpm at 150 PSI
[3] L - Low Pressure
    U - Ultra Low Pressure
    SW - Seawater
    HF - High Flux
    HR - High Rejection
    CR - Chlorine Resistant
    FR - Fouling Resistant
    



 
Hydranautics 
401 Jones Road
Oceanside, CA 92058 
United States 
760-901-2656
Visit this company's website


Facility : Oceanside, CA

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Reverse Osmosis Element
ESNA1-LF[1] [2] CLD 23 MLTPL
ESNA1-LF LD[1] [2] CLD 23 MLTPL
ESNA1-LF2[1] [2] CLD 23 MLTPL
ESNA1-LF2 LD[1] [2] CLD 23 MLTPL
ESNA4-LF[1] [2] CLD 23 MLTPL
LFC1[1] [2] CLD 23 MLTPL
LFC1-46HP[1] [2] CLD 23 MLTPL
LFC3[1] [2] CLD 23 MLTPL
LFC3-46HP[1] [2] CLD 23 MLTPL
LFC3-LD[1] [2] CLD 23 MLTPL

[1] Certification is for a minimum flow of 2,650 liters per day, and is based on flushing
    the unit for a minimum of 30 minutes at 145-155 psi prior to being placed into service.
[2] Certification is for 8" - 8.44" diameter models only.
[3] Size is expressed as diameter by length.
[4] 4040 Elements are Certified for a minimum daily flow of 1,600 gallons.
[5] Certification is based on flushing the unit for a minimum of 30 minutes at 8 gallons per
    minute prior to being placed into service.
[6] 1640 Elements are Certified for a minimum daily flow of 28,900 gallons.
[7] Certified for a minimum flow of 1,850 gallons per day.
[8] Certified for a minimum flow of 7,500 gallons per day.
[9] Certified for a minimum flow of 2,380 gallons per day.
[10] Certified for a minimum flow of 9,500 gallons per day.
[11] 4" models require a flush of 3 gpm for 30 minutes with Deionized water prior to use.  8"
     models require a flush of 10 gpm for 30 minutes with Deionized water prior to use.
[12] Model ESNA4-LD is certified to a minimum daily flow of 8,000 gallons per day.  ESNA4-LD
     is flushed at a flow rate of 7 gallons per minute for 30 minutes with water that has a
     chlorine concentration <0.1ppm, a pH between 2-10, Feedwater Turbidity: 1.0 NTU Max. and
     Feedwater SDI (15 minus): 5.0 max.



Facility : Shiga, Japan

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Filtration Devices/Components
ESPA DHF-M flat sheet membrane[1] [2] CLD 23 OTHER
ESPA DSF-M flat sheet membrane[1] [2] CLD 23 OTHER
ESPA-DHF flat sheet membrane[1] [2] CLD 23 OTHER
ESPA-DHR flat sheet membrane[1] [2] CLD 23 OTHER
ESPA-DSF flat sheet membrane[1] [2] CLD 23 OTHER
ESPA-XF-10 flat sheet membrane[1] [2] CLD 23 OTHER

[1] Certified for a minimum daily permeate flow of 1,000 gallons.  Product requires a
    potable water flush of 10 minutes at 100 PSI, followed by 20 minutes at 70 - 100 PSI
    before use.
[2] Certified for a maximum surface area of 440 sq. ft.

Reverse Osmosis Element
LFC3-LD[4] 8" x 40" CLD 23 MLTPL
LFC3-LD-4040[3] 4" x 40" CLD 23 MLTPL

[3] Certification is for the following minimum daily permeate flow and is based on flushing
    the unit with RO water for a minimum of 30 minutes at 36 gpm prior to being placed into
    service.
    CPA2-4040    - 1,910 gallons
    ESPA2-4040   - 1,615 gallons
    ESPA4-4040   - 2,125 gallons
    CPA7-LD-4040 - 1,955 gallons
    LFC3-LD-4040 - 1,785 gallons
    ESNA1-4040   - 1,785 gallons
    SWC5-LD-4040 is certified for a minimum daily flow of 700 gallons.
[4] All models are flushed at a rate of 53 gpm for 30 minutes with RO Water.
[5] The PROC10, PROC30 and CPA7-MAX models are certified for a minimum daily flow of 9,350
    gallons per day. All other models are certified for a minimum flow of 2,650 liters per
    day.
[6] PRO-XC1 is certified for a minimum daily flow of 6500 gallons per day for use in public
    water treatment facilities.PRO-XC1 requires a pre-service flush at 53 GPM (gallons per
    minute) for 30 minutes using De-ionized water.
[7] PRO-XC2 is certified for a minimum daily flow of 8000 gallons per day for use in public
    water treatment facilities.PRO-XC2 requires a pre-service flush at 53 GPM (gallons per
    minute) for 30 minutes using De-ionized water
[8] SWC5-LD-4040 is flushed at a rate of 15 gpm for 30 minutes with RO water.



 
Hydranautics 
401 Jones Road
Oceanside, CA 92058 
United States 
760-901-2500


Facility : # 1 China

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Ultrafiltration Devices [1]
HYDRAcap® AM 160 mm x 2200 mm CLD 23 MLTPL
HYDRAcap® MAX 40[1] 250 mm x 1160 mm CLD 23 MLTPL
HYDRAcap® MAX 60 250 mm x 1730 mm CLD 23 MLTPL
HYDRAcap® MAX 80 250 mm x 2230 mm CLD 23 MLTPL

[1] Certified for the following minimum daily flow rates:
    HYDRAcap® MAX 40 - 6400 L/day
    HYDRAcap® MAX 60 - 9360 L/day
    HYDRAcap® MAX 80 - 11520L/day
    HYDRAcap® AM - 5760 L/day
[1] Certified for the following minimum daily flow rates:
    HYDRAcap® MAX 40 - 6400 L/day
    HYDRAcap® MAX 60 - 9360 L/day
    HYDRAcap® MAX 80 - 11520L/day
    HYDRAcap® AM - 5760 L/day



Facility : # 1 Singapore

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Ultrafiltration Devices[1]
HYDRAcap® AM 160 mm x 2200 mm CLD 23 MLTPL
HYDRAcap® MAX 40 250 mm x 1160 mm CLD 23 MLTPL
HYDRAcap® MAX 60 250 mm x 1730 mm CLD 23 MLTPL
HYDRAcap® MAX 80 250 mm x 2230 mm CLD 23 MLTPL

[1] Certified for the following minimum daily flow rates:
    HYDRAcap® MAX 40 - 6400 L/day
    HYDRAcap® MAX 60 - 9360 L/day
    HYDRAcap® MAX 80 - 11520L/day
    HYDRAcap® AM - 5760 L/day



Facility : # 2 China

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Ultrafiltration Devices[1]
HYDRAcap® AM 160 mm x 2200 mm CLD 23 MLTPL
HYDRAcap® MAX 40 250 mm x 1160 mm CLD 23 MLTPL
HYDRAcap® MAX 60 250 mm x 1730 mm CLD 23 MLTPL
HYDRAcap® MAX 80 250 mm x 2230 mm CLD 23 MLTPL

[1] Certified for the following minimum daily flow rates:
    HYDRAcap® MAX 40 - 6400 L/day
    HYDRAcap® MAX 60 - 9360 L/day
    HYDRAcap® MAX 80 - 11520L/day
    HYDRAcap® AM - 5760 L/day



 
Hydron Membrane Technology 
8630 Rochester Avenue
Rancho Cucamonga, CA 91730 
United States 
909-527-6996
Visit this company's website


Facility : 3A

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Reverse Osmosis Element[1] [2] [3] [4]
HFR-4040 4" x 40" CLD 23 MLTPL
HFR-8040 8" x 40" CLD 23 MLTPL

[1] Certified for both wet and dry elements.
[2] All elements (wet and dry) require a pre-service flush:
    Fill the RO pressure vessel with qualified pretreated water. The feed water pressure
    shall be restricted to 50 psi and the flow rate shall be equal to 16 GPM (gallons per
    minute). The rejected water and product water shall be discharged completely. The
    membrane element shall be flushed for 6 hours. No antiscalant shall be
    added in flushing.
[3] The 2521, 2540 and 4021 elements are evaluated for point-of-entry end uses.
[4] 4040 and 8040 elements are Certified for minimum flow rates of:
    4040 size - 8,000 L/day
    8040 size - 30,000 L/day



 
Hydronix Water Technology 
8630 Rochester Avenue
Rancho Cucamonga, CA 91730 
United States 
909-527-6996
Visit this company's website


Facility : 3C

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Filtration Devices/Components[1] [2] [G]
Sediment Bonded Cartridge (SBC-XXYYZZ) [3] CLD 23 PP
Sediment Bonded Cartridge (SBX-XXYYZZ) [3] CLD 23 PP
Sediment Bonded Cartridge (WW-SBXXYYZZ) [4] CLD 23 PP
Sediment Depth Cartridge (SDC-XXYYZZ) [3] CLD 23 PP
Sediment Depth Cartridge (SDX-XXYYZZ) [3] CLD 23 PP
Sediment Depth Cartridge (WW-SDXXYYZZ) [4] CLD 23 PP
Sediment Grooved Cartridge (SGC-XXYYZZ) [3] CLD 23 PP
Sediment Grooved Cartridge (SGX-XXYYZZ) [3] CLD 23 PP
Sediment Grooved Cartridge (WW-SGXXYYZZ) [4] CLD 23 PP
Sediment Wound Cartridge (SWC-XXYYZZ) [3] CLD 23 PP
Sediment Wound Cartridge (SWX-XXYYZZ) [3] CLD 23 PP

[1] Certified for point-of-entry (POE) and municipal end uses.
[2] Certification does not include inner core, adapters, o-rings, gaskets, or end caps.
[3] XX - 1.5" – 8" Diameter					
    YY - 2" – 60" Length					
    ZZ - 0.5m – 200m Micron Rating					
    *Special lengths and diameters within the certified range are included in the
    certification such as 2 1/4" diameter and 30 1/4" length.
[4] WW - Internal Code AA-ZZ					
    XX - 1.5" – 8" Diameter					
    YY - 2" – 60" Length					
    ZZ - 0.5m – 200m Micron Rating					
    *Special lengths and diameters within the certified range are included in the
    certification such as 2 1/4" diameter and 30 1/4" length.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



 
Hydronix Water Technology / HydroScientific 
8630 Rochester Avenue
Rancho Cucamonga, CA 91730 
United States 
909-527-6996
Visit this company's website


Facility : 2A

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Filtration Devices/Components[1] [2] [G]
HBBC-150-PX [3] CLD 23 MLTPL
HHFEC-XX-YY [4] CLD 23 MLTPL
HSC-XX-YYY [5] CLD 23 MLTPL
HSC-XXX-LT2 [6] CLD 23 MLTPL
SPC-XXX-YYZZZ [7] CLD 23 MLTPL
SPX-XXX-YYZZZ [8] CLD 23 MLTPL

[1] Flushing Procedure: 5 min flush with clean water.
[2] Certified for point of entry (POE) and municipal end uses.
[3] HBBC-150-PXX is denoted as follows:
    HBBC: Big Flow Cartridge
    150: GPM
    P: Pleated
    XX: 1 (1), 5 (5), 20 (20), 50 (50) Micron Rating
[4] HHFEC-XX-YY is denoted as follows:
    HHFEC: High Flow Filter Cartridges
    XX: 0.2 (0.2), 01 (1), 05 (5), 10 (10), 20 (20), 30 (30), 50 (50), 70 (70) Micron Rating
    YY: 20”, 23” (Blank), 40”, 60”
[5] HSC-XX-YYY is denoted as follows:
    XX: Length - 40 (9 5/8”) , 90 (19 ½”), 170 (30 ¾”)
    YYY: 0.2, 0.35, 0.45, 1, 5, 10, 20, 50, 100, 150 Micron Rating
    PPA or blank: PPA (Pleated All Poly), blank (Pleated Synthetic)
[6] HSC-XXX-LT2 is denoted as follows:
    XXX: Length - 40 (9 5/8”) , 90 (19 ½”), 170 (30 ¾”)
    LT2: 1 micron absolute
[7] SPC-XXX-YYZZZ is denoted as follows:
    SPC: Sediment Pleated Cartridge
    XXX: Outside Diameter – 25 (2.5”), 45 (4.5”)
    YY: Length - 10 (9 7/8”), 20 (20”), 30 (30”), 40 (40”)
    ZZZ: 0.2 (0.2), 01 (1), 05 (5), 10 (10), 20 (20), 30 (30), 50 (50), 100 (100) Micron
    Rating
[8] SPX-XXX-YYZZZ is denoted as follows:
    SPX: Sediment Pleated Cartridge
    XXX: Outside Diameter – 25 (2.5”), 45 (4.5”)
    YY: Length - 10 (9 7/8”), 20 (20”), 30 (30”), 40 (40”)	
    ZZZ: .2A (0.2), .35 (0.35), 01 or 01A (1), 05 (5), 10 (10), 20 (20), 30 (30), 50 (50),
    100 (100) Micron Rating
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



Facility : 1D

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Filtration Devices/Components[1] [2] [G]
BF-(1)-(2)-(3)-(4) [3] CLD 23 MLTPL
HBCJ-(1)-(2) [4] CLD 23 MLTPL
HF-(1)-(2)-(3)-(4)-(5) [5] CLD 23 MLTPL
HSBJ-(1)-(SB)-(2)-(3) [6] CLD 23 MLTPL
MBF-(1)-(2)-(3) [7] CLD 23 MLTPL
MRH(S)-(1)-(2)-(3)-(BC) [8] CLD 23 MLTPL
MRH(S)-(SB)-(1)-(2)-(3) [9] CLD 23 MLTPL
SC-(1)-(SB)-(2)-(3) [6] CLD 23 MLTPL

[1] Flushing Procedure: 5 min flush with clean water.
[2] Certified for point of entry (POE) and municipal end uses.
[3] BF-(1)-(2)-(3)-(4) is denoted as follows:
    (1) Size: 1, 2, 3, 4
    (2) MOC: 304, 316, C (Carbon Steel)
    (3) Port Diameter: 1”, 2"
    (4) Cap Style: NBC (Band Clamp), N (Swing Bolt)
[4] HBCJ-(1)-(2) is denoted as follows:
    (1) Model: 40, 90, 170
    (BC) Band Clamp
    (2) MOC: 304 (blank) or 316
[5] HF-(1)-(2)-(3)-(4)-(5) is denoted as follows:
    (1) Size: E (Economy), 2 (20”), 4 (40”), 6 (60”)
    (2) Orientation: V (Vertical), H (Horizontal)
    (3) MOC: 304 or 316
    (4) Port Diameter: 2”, 3”, 4”, 6”, 8”, 12” 
    (5) Cartridge #: 3 (3), 4 (4), 7 (7), 12 (12)
[6] HSBJ-(1)-(SB)-(2)-(3) and SC-(1)-(SB)-(2)-(3) are denoted as follows:
    (1) Model: 40, 90, 170
    (SB) Swing Bolt
    (2) Cartridge #: 3, 4, 5, 8, 12, 16
    (3) MOC: 304 (blank) or 316
[7] MBF-(1)-(2)-(3) is denoted as follows:
    (1) Bag #: 2, 3, 4, 5, 6, 8, 12
    (2) MOC: 304, 316
    (3) Flange Port Diameter (IN): 3F, 4F, 6F, 8F, 10F
[8] MRH(S)-(1)-(2)-(3)-(BC) is denoted as follows:
    MRH-MOC: 304
    MRHS-MOC: 316
    (1) Cartridge #: 4, 5, 7, 12, 22, 36, 52, 85
    (2) Length: 10”, 20”, 30”, 40”
    (3) Port Diameter (IN): 2
    (BC) Band Clamp
[9] MRH(S)-(SB)-(1)-(2)-(3) is denoted as follows:
    MRH-MOC: 304
    MRHS-MOC: 316
    (SB) Swing Bolt
    (1) Bag #: 4, 5, 7, 12, 22, 36, 52, 85
    (2) Length: 10”, 20”, 30”, 40” , 50” 
    (3) Port Diameter (IN): 2 (FNPT), 3F, 4F, 6F, 8F , 10F, 12F
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



 
HYORIM E&I Corp 
96-8, Yatap-ro, Bundang-gu
Seongnam-si, Gyeonggi-Do 
13517 
Republic of Korea 
82 031 781 6061
Visit this company's website


Facility : Asan-si, Chungcheongnam-Do, Korea, Republic of

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Filter Underdrain [G]
Underdrain I Block SYSTEM [1] CLD 23 MLTPL

[1] Certified for a minimum daily flow of 2 gallons per minutes per square foot of filter
    surface area.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



 
IMI Flow Design, an IMI Hydronic Engineering Inc. Brand (Fr. Flow Design Inc.) 
8908 Governors Row
Dallas, TX 75247 
United States 
800-275-3569 
214-631-0011
Visit this company's website


Facility : Dallas, TX

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Valves [G]
ICSS050FF(y)-(z) [1] C. HOT MLTPL
ICSS075FF(y)-(z) [1] C. HOT MLTPL
ICSS100FF(y)-(z) [1] C. HOT MLTPL
ICSS125FF(y)-(z) [1] C. HOT MLTPL
ICSS150FF(y)-(z) [1] C. HOT MLTPL
ICSS200FF(y)-(z) [1] C. HOT MLTPL

[1] IC  - In-line controller
    SS  - Stainless steel
    xxx - Size of pipe connection
          050 - 1/2"
          075 - 3/4"
    FF  - Both valve ends contain female NPT pipe connections.
    y   - Pressure (PSID) range
          L - 2-32 psi
          H - 5-60 psi
    z   - Flow rate (0.33-12.0 GPM)
    100 - 1"
    125 - 1 1/4"
    150 - 1 1/2"
    200 - 2"
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



 
IMI TA, an IMI Hydronic Engineering Inc. Brand (Formerly TA Hydronics) 
8908 Governors Row
Dallas, TX 75247 
United States 
855-55-ASKTA 
214-631-0111


Facility : Dallas, TX

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Valves [G]
ICSS050FF(y)-(z) [1] C. HOT MLTPL
ICSS075FF(y)-(z) [1] C. HOT MLTPL

[1] IC  - In-line controller
    SS  - Stainless steel
    xxx - Size of pipe connection
          050 - 1/2"
          075 - 3/4"
    FF  - Both valve ends contain female NPT pipe connections.
    y   - Pressure (PSID) range
          L - 2-32 psi
          H - 5-60 psi
    z   - Flow rate (0.33-12.0 GPM)
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



 
Industrial Filter Manufacturing LTD. 
187 Robert Street East
Penetanguishene, ON L9M 1G9 
Canada 
800-225-9330 
705-549-9777
Visit this company's website


Facility : Penetanguishene, Ontario, Canada

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Filtration Devices/Components[G]
Proflo Liquid Filter Bag PO XX P1PW 7" x 16.5" CLD 23 PP
Proflo Liquid Filter Bag PO XX P2PW 7" x 32" CLD 23 PP
Proflo Liquid Filter Bag PO XX P3PW 4" x 8" CLD 23 PP
Proflo Liquid Filter Bag PO XX P4PW 4" x 14" CLD 23 PP

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



 
Industrial Filter Manufacturing Ltd. (formerly MGS Filter Products Inc.) 
187 Robert Street East
Mississauga, ON L9M 1G9 
Canada 
905-565-0408


Facility : Mississauga, Ontario, Canada

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Filtration Devices/Components[1]
Filter Cartridge [2] C. HOT MLTPL
Stringwound Filter Cartridge [2] C. HOT MLTPL
Wound Filter Cartridge [2] C. HOT MLTPL

[1] Only products bearing the NSF Mark are Certified.
[2] Certified for a minimum flow rate of 27,300 L/day.  Micron size: 1 - 150 microns,
    length: 9 3/4" - 50", outer diameter: 2 3/8" - 4 1/2".



 
Inge GmbH 
Flurstrasse 27
Greifenberg 86926 
Germany 
49 819 299 7700


Facility : Greifenberg, Germany

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Ultrafiltration Devices[1] [2]
Inge™ MB 0.9 L 40 HB N/A CLD 23 MLTPL
Inge™ MB 0.9 L 55 H N/A CLD 23 MLTPL
Inge™ MB 0.9 L 55 R N/A CLD 23 MLTPL
Inge™ MB 0.9 L 55 V N/A CLD 23 MLTPL
Inge™ MB 0.9 XL 38 OP N/A CLD 23 MLTPL
Inge™ MB 0.9 XL 60 OP N/A CLD 23 MLTPL
Inge™ MB 0.9 XL 60 TRS N/A CLD 23 MLTPL
Inge™ MB 0.9 XL 60i TRS N/A CLD 23 MLTPL
Inge™ MB 0.9 XL 70 TR N/A CLD 23 MLTPL
Inge™ MB 0.9 XL 80 OP N/A CLD 23 MLTPL
Inge™ MB 0.9 XL 80 TR N/A CLD 23 MLTPL
Inge™ MB 0.9 XL 80i TR N/A CLD 23 MLTPL
Inge™ MB 1.5 XL 25 OP N/A CLD 23 MLTPL
Inge™ MB 1.5 XL 40 OP N/A CLD 23 MLTPL
Inge™ MB 1.5 XL 40 TRS N/A CLD 23 MLTPL
Inge™ MB 1.5 XL 50 TR N/A CLD 23 MLTPL
Inge™ MB PRO L 64 H N/A CLD 23 MLTPL
Inge™ MB PRO L 64 R N/A CLD 23 MLTPL
Inge™ MB PRO L 64 V N/A CLD 23 MLTPL
Inge™ MB PRO XL 82 OP N/A CLD 23 MLTPL
Inge™ MB PRO XL 82 TRS N/A CLD 23 MLTPL
Inge™ MB PRO XL 82 WR OP N/A CLD 23 MLTPL
Inge™ MB PRO XL 82i TRS N/A CLD 23 MLTPL
Inge™ MB PRO XL 95 OP N/A CLD 23 MLTPL
Inge™ MB PRO XL 95 TR N/A CLD 23 MLTPL
Inge™ MB PRO XL 95i TR N/A CLD 23 MLTPL
Inge™ T-Rack™ N/A CLD 23 MLTPL
Inge™ T-Rack™ S N/A CLD 23 MLTPL
Inge™ T-Rack™ vario N/A CLD 23 MLTPL
IntegraTec™ MB 25 N/A CLD 23 MLTPL
IntegraTec™ MB 38 N/A CLD 23 MLTPL
IntegraTec™ MB 40 N/A CLD 23 MLTPL
IntegraTec™ MB 40 H N/A CLD 23 MLTPL
IntegraTec™ MB 40 HB N/A CLD 23 MLTPL
IntegraTec™ MB 40 TR S N/A CLD 23 MLTPL
IntegraTec™ MB 50 TR N/A CLD 23 MLTPL
IntegraTec™ MB 55 H N/A CLD 23 MLTPL
IntegraTec™ MB 55 V N/A CLD 23 MLTPL
IntegraTec™ MB 60 N/A CLD 23 MLTPL
IntegraTec™ MB 60 TR S N/A CLD 23 MLTPL
IntegraTec™ MB 80 N/A CLD 23 MLTPL
IntegraTec™ MB 80 TR N/A CLD 23 MLTPL
IntegraTec™ MB PRO 64 H N/A CLD 23 MLTPL
IntegraTec™ MB PRO 64 V N/A CLD 23 MLTPL
IntegraTec™ MB PRO 82 N/A CLD 23 MLTPL
IntegraTec™ MB PRO 82 TR S N/A CLD 23 MLTPL
IntegraTec™ MB PRO 82 WR N/A CLD 23 MLTPL
IntegraTec™ MB PRO 95 N/A CLD 23 MLTPL
IntegraTec™ MB PRO 95 TR N/A CLD 23 MLTPL
IntegraTec™ S MB PRO 72[3] [4] N/A CLD 23 MLTPL
IntegraTec™ Submerged MB Rack[3] N/A CLD 23 MLTPL
Integratec™ MB 55 R N/A CLD 23 MLTPL
Integratec™ MB PRO 64 R N/A CLD 23 MLTPL
T-Rack 3.0 N/A CLD 23 MLTPL
T-Rack 3.0 S N/A CLD 23 MLTPL
T-Rack vario N/A CLD 23 MLTPL
T-Rack® 3.0 N/A CLD 23 MLTPL
T-Rack® 3.0 S N/A CLD 23 MLTPL
T-Rack® vario N/A CLD 23 MLTPL
dizzer XL 0.9 MB 60 ST N/A CLD 23 MLTPL
dizzer XL 0.9 MB 60 WT N/A CLD 23 MLTPL
dizzer XL 0.9 MB 70 W N/A CLD 23 MLTPL
dizzer XL 0.9 MB 70 WT N/A CLD 23 MLTPL
dizzer XL 1.5 MB 40 ST N/A CLD 23 MLTPL
dizzer XL 1.5 MB 40 WT N/A CLD 23 MLTPL
dizzer XL 1.5 MB 50 W N/A CLD 23 MLTPL
dizzer XL 1.5 MB 50 WT N/A CLD 23 MLTPL
dizzer® 3000 N/A CLD 23 MLTPL
dizzer® 3000 plus N/A CLD 23 MLTPL
dizzer® 3000plus WR N/A CLD 23 MLTPL
dizzer® 5000 N/A CLD 23 MLTPL
dizzer® 5000 plus N/A CLD 23 MLTPL
dizzer® 5000plus WR N/A CLD 23 MLTPL
dizzer® L 0.8 MB 40 PB N/A CLD 23 MLTPL
dizzer® L 0.8 MB 46 PB N/A CLD 23 MLTPL
dizzer® L 0.9 MB 25 PB N/A CLD 23 MLTPL
dizzer® L 0.9 MB 28 P N/A CLD 23 MLTPL
dizzer® L 0.9 MB 36 PB N/A CLD 23 MLTPL
dizzer® L 0.9 MB 40 P N/A CLD 23 MLTPL
dizzer® L 0.9 MB 40 PB N/A CLD 23 MLTPL
dizzer® L 0.9 MB 40 PC N/A CLD 23 MLTPL
dizzer® L 0.9 MB 55 N/A CLD 23 MLTPL
dizzer® XL 0.9 MB 36 N/A CLD 23 MLTPL
dizzer® XL 0.9 MB 36 N/A CLD 23 MLTPL
dizzer® XL 0.9 MB 36 WR N/A CLD 23 MLTPL
dizzer® XL 0.9 MB 38 W N/A CLD 23 MLTPL
dizzer® XL 0.9 MB 60 N/A CLD 23 MLTPL
dizzer® XL 0.9 MB 60 W N/A CLD 23 MLTPL
dizzer® XL 0.9 MB 60 WK N/A CLD 23 MLTPL
dizzer® XL 0.9 MB 60 WR N/A CLD 23 MLTPL
dizzer® XL 0.9 MB 64 P N/A CLD 23 MLTPL
dizzer® XL 0.9 MB 80 W N/A CLD 23 MLTPL
dizzer® XL 0.9 MB 80 WT N/A CLD 23 MLTPL
dizzer® XL 1.5 MB 25 N/A CLD 23 MLTPL
dizzer® XL 1.5 MB 25 W N/A CLD 23 MLTPL
dizzer® XL 1.5 MB 25 WR N/A CLD 23 MLTPL
dizzer® XL 1.5 MB 40 N/A CLD 23 MLTPL
dizzer® XL 1.5 MB 40 W N/A CLD 23 MLTPL
dizzer® XL 1.5 MB 40 WR N/A CLD 23 MLTPL
dizzer™ 3000 plus WR N/A CLD 23 MLTPL
dizzer™ 5000 plus WR N/A CLD 23 MLTPL
dizzer™ L 0.9 MB 36 PB N/A CLD 23 MLTPL
dizzer™ L 0.9 MB 40 P N/A CLD 23 MLTPL
dizzer™ L 0.9 MB 40 PC N/A CLD 23 MLTPL
dizzer™ L 0.9 MB 55 N/A CLD 23 MLTPL
dizzer™ XL 0.9 MB 36 WR N/A CLD 23 MLTPL
dizzer™ XL 0.9 MB 38 W N/A CLD 23 MLTPL
dizzer™ XL 0.9 MB 60 WR N/A CLD 23 MLTPL
dizzer™ XL 0.9 MB 64 P N/A CLD 23 MLTPL
dizzer™ XL 0.9 MB 80 W N/A CLD 23 MLTPL
dizzer™ XL 1.5 MB 25 WR N/A CLD 23 MLTPL
dizzer™ XL 1.5 MB 40 WR N/A CLD 23 MLTPL
dizzer™ XL 1.5 MB 50 WT N/A CLD 23 MLTPL

[1] Certified for a minimum flow of 533 liters per day.
[2] The combination of this membrane and the VenusFlow repair product is compliant with the
    requirements of NSF/ANSI/CAN 61.
[3] IntegraTec™ Submerged MB Rack is certified for a minimum daily flow of 1,049,760 liters
    for use in public water treatment facilities. IntegraTec™ S MB PRO 72 is certified for a
    minimum daily permeate generation of 38,880 liters per module for use in public water
    treatment facilities.
[4] IntegraTec™ S MB PRO 72 requires a pre-service flush at a flow rate of 96 liters per
    minute (lpm) for 60 minutes using tap water.

Ultrafiltration Devices: Point of Entry[1] [2]
Inge™ MB 0.9 P 2514-0.5 N/A CLD 23 MLTPL
Inge™ MB 0.9 P 2521-1.0 N/A CLD 23 MLTPL
Inge™ MB 0.9 P 4021-2.5 N/A CLD 23 MLTPL
Inge™ MB 0.9 P 4040-6.0 N/A CLD 23 MLTPL
Inge™ MB 1.5 P 4021-1.8 N/A CLD 23 MLTPL
Inge™ MB 1.5 P 4040-4.0 N/A CLD 23 MLTPL
TapTec™ P 2514-0.5 N/A CLD 23 MLTPL
TapTec™ P 2521-1.0 N/A CLD 23 MLTPL
TapTec™ P 4021-1.8 N/A CLD 23 MLTPL
TapTec™ P 4021-2.5 N/A CLD 23 MLTPL
TapTec™ P 4040-4.0 N/A CLD 23 MLTPL
TapTec™ P 4040-6.0 N/A CLD 23 MLTPL
dizzer® P 2514-0.5 N/A CLD 23 MLTPL
dizzer® P 2521-1.0 N/A CLD 23 MLTPL
dizzer® P 4021-1.8 N/A CLD 23 MLTPL
dizzer® P 4021-2.5 N/A CLD 23 MLTPL
dizzer® P 4040-4.0 N/A CLD 23 MLTPL
dizzer® P 4040-6.0 N/A CLD 23 MLTPL

[1] Certified for a minimum flow of 533 liters per day.
[2] The combination of this membrane and the VenusFlow repair product is compliant with the
    requirements of NSF/ANSI/CAN 61.



 
Innovative Water Care DBA Solenis LLC 
2475 Pinnacle Drive
Wilmington, DE 19803 
United States 
678-627-2000
Visit this company's website


Facility : Hiram, GA

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Chemical Feeders
Constant Chlor® MC4-150[1] [2] [3] N/A CLD 23 MLTPL
Constant Chlor® MC4-150 Lite[1] [2] [3] N/A CLD 23 MLTPL
Constant Chlor® MC4-400[1] [2] [3] N/A CLD 23 MLTPL
Constant Chlor® MC4-50[1] [2] [3] N/A CLD 23 MLTPL
Constant Chlor® MC4-50 Lite[1] [2] [3] N/A CLD 23 MLTPL
Constant Chlor® MC4-850[1] [2] [3] N/A CLD 23 MLTPL
Constant Chlor® MC6[1] [2] [3] N/A CLD 23 MLTPL

[1] Certification of this product has been performed to the health effects requirements of
    NSF/ANSI/CAN 61, which assesses the acceptability of potential extractants from the
    chemical feeder when used with the manufacturer's recommended use chemicals. Any
    modifications including the use of chemicals other than those recommended by the
    manufacturer and chemicals that are not compliant to NSF/ANSI/CAN 60 will void the NSF
    Certification for this feeder.
[2] Only products bearing the NSF Mark on the product, product packaging, and/or
    documentation shipped with the product are Certified.
[3] Certified for a maximum 1.5% calcium hypochlorite solution added to drinking water to
    effect a maximum use level (MUL) of 10 ppm total chlorine, with a minimum of 60,000
    gallons of water treated per day.



 
Intatec Limited 
Airfield Industrial Estate
Hixon, Staffordshire ST18 0PF 
United Kingdom 
44 1889 272180
Visit this company's website


Facility : # 1 UK

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Miscellaneous Process Devices/Components[G]
3/4" NPT MALE THREAD ACTIVFLO / ZAF034 3/4" C. HOT MLTPL
1” NPT MALE THREAD ACTIVFLO / ZAF010 1" C. HOT MLTPL
1” NPT MALE THREAD ACTIVFLO (HIGH FLOW) / ZAF010H 1" C. HOT MLTPL
1/2" M x 1/2" F NPT ActivFlo Solo Water Conditioner / ZAF012MF 1/2" C. HOT MLTPL

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



 
Ion Exchange (India) Limited 
Site 2 Ion House
Dr. E. Moses Road, Mahalaxmi 
Mumbai, MM 400011 
India 
91 22 6231 2042


Facility : Goa, India

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Reverse Osmosis Element
HM 4040-BWE High Performance Brackish Water RO Element[1] [2] 4" x 40" CLD 23 MLTPL
HM 8040-BWE-400 High Performance Brackish Water RO Element[3] [4] 8" x 40" CLD 23 MLTPL

[1] Trade name HM 4040-BWE High Performance Brackish Water RO Element is certified for a
    minimum daily permeate generation of 2,600 gallons for use in public water treatment
    facilities.
[2] HM 4040-BWE High Performance Brackish Water RO Element requires a pre-service flush at a
    flow rate of 7 liters per minute for 60 minutes using deionized water.
[3] Trade name HM 8040-BWE-400 High Performance Brackish Water RO Element is certified for a
    minimum daily permeate generation of 11,000 gallons for use in public water treatment
    facilities.
[4] HM 8040-BWE-400 High Performance Brackish Water RO Element requires a pre-service flush
    at a flow rate of 29 liters per minute for 60 minutes using deionized water.



 
IPEX Incorporated 
3 Place Du Commerce, Suite 101
Île-des-Soeurs 
Verdun, QC H3E 1H7 
Canada 
514-769-2200
Visit this company's website


Facility : Genova, Italy

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Valves[G]
353017 (VXEFV110) 3" CLD 23 MLTPL
353018 (VXEFV210) 3" CLD 23 MLTPL
353019 (VXEFV111) 4" CLD 23 MLTPL
353020 (VXEFV211) 4" CLD 23 MLTPL
353057 (VXEFC110) 3" C. HOT MLTPL
353058 (VXEFC210) 3" C. HOT MLTPL
353059 (VXEFC111) 4" C. HOT MLTPL
353060 (VXEFC211) 4" C. HOT MLTPL
353215 (VEEFV104) 3/4" CLD 23 MLTPL
353217 (VEEFV105) 1" CLD 23 MLTPL
353219 (VEEFV106) 1 1/4" CLD 23 MLTPL
353220 (VEEFV107) 1 1/2" CLD 23 MLTPL
353221 (VEEFV108) 2" CLD 23 MLTPL
353374 (VEEFV103) 1/2" CLD 23 MLTPL
353735 (VEEFV109) 2 1/2" CLD 23 MLTPL
353736 (VEEFV110) 3" CLD 23 MLTPL
353737 (VEEFV111) 4" CLD 23 MLTPL

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
      documentation shipped with the product are Certified.


 
ISIGENERE USA, LLC 
C/Chapaprieta, Nave 5
Beneixama 
03460 
Spain 
34 865 612 910
Visit this company's website


Facility : Portage, MI

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Miscellaneous Process Devices/Components
MAIN FLOAT MF5[1] [2] CLD 23 HDPE

[1] Complies with US EPA Maximum Contaminant Levels (MCLs) for PFAS according to
    NSF/ANSI/CAN 61.
[2] Certified for a maximum surface area to volume ratio of 0.13 square inches/liter.



Facility : Tonawanda, NY

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Miscellaneous Process Devices/Components
SECONDARY FLOAT UF5 V1[1] [2] CLD 23 HDPE

[1] Complies with US EPA Maximum Contaminant Levels (MCLs) for PFAS according to
    NSF/ANSI/CAN 61.
[2] Certified for 0.39 square inches/liter.



 
ITT Goulds Pumps Inc. 
240 Fall Street
Seneca Falls, NY 13148 
United States 
315-568-2811
Visit this company's website


Facility : Seneca Falls, NY

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Pumps [3] [G]
Goulds LF3196[1] 1" - 24" CLD 23 MLTPL

[1] Certified for water end uses only.  Not Certified for chemical service.
[2] Certified for stainless steel pumps only.
[3] Only products bearing the NSF Mark on the product, product packaging, and/or
    documentation shipped with the product are Certified.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



 
Ixom Watercare, Inc. 
3225 Highway 22 North
Dickinson, ND 58601-9419 
United States 
866-437-8076 
701-225-4495
Visit this company's website


Facility : Dickinson, ND

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Miscellaneous Process Devices/Components [G]
GridBee® Electric Powered Tank Mixer GF10000PW >= 10,000 gal. CLD 23 MLTPL
GridBee® Electric Powered Tank Mixer GF5000PW >= 10,000 gal. CLD 23 MLTPL
GridBee® SN1 Floating Spray Nozzle THM Removal[4] [5] [6] [7] >= 5,000 gal. CLD 23 MLTPL
GridBee® SN10 Floating Spray Nozzle THM Removal[4] [5] [6] >= 10,000 gal. CLD 23 MLTPL
GridBee® SN15 Floating Spray Nozzle THM Removal[4] [5] [6] >= 10,000 gal. CLD 23 MLTPL
GridBee® SN3 Floating Spray Nozzle THM Removal[4] [5] [6] >= 10,000 gal. CLD 23 MLTPL
GridBee® SN5 Floating Spray Nozzle THM Removal[4] [5] [6] >= 10,000 gal. CLD 23 MLTPL
SolarBee Grid Powered, Long Distance Circulation Unit GF1250PWc >= 10,000 gal. CLD 23 MLTPL

[1] The air hose is optional.  The unit can be sold without the hose and the end use
    customer can use their own hose.
[2] Certification of the GS-9, GS-12, GS-9 v2, and GS-12 v2 does not include the motor.
[3] 76' EPDM cables are restricted to use in tanks 20,000 gallons and greater.  151' EPDM
    cables are restricted to use in tanks 40,000 gallons and greater.
[4] Certification does not include a motor.
[5] The numerical suffix (1, 3, 5, 10, 15) after the SN in the trade name indicates the
    horsepower of the motor.
[6] 200' EPDM cables are restricted to use in tanks 50,000 gallons and greater.
[7] Certification does not include a pump or a motor.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



 
J Flow Controls 
4665 Interstate Drive
Cincinnati 
Ohio, OH 45246 
United States 
513-731-2900
Visit this company's website


Facility : # 1 Korea

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Valves[1] [2] [G]
8334BF 2" - 24" CLD 23 MLTPL
F8334BR 2" - 24" CLD 23 MLTPL

[1] Available disc types for all models are Stainless Steel, Aluminum Bronze, and Nylon 11
    coated ductile iron.
[2] Series 80D3BE is Wafer type / Cartridge Seat, and Series 81D3BE is Lug type/Cartridge
    seat. Wafer type and Lug type refer to a flange type.
    8334BF, 8334BR, and F8334BR are High Performance Lug type, Wafer type, and Lug type
    refer to a flange type.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



 
JAINSON CABLES INDIA PRIVATE LIMITED 
Survey No.28 & 29
Ahmedabad-Mehsana Highway 
Chandarda, Nandasan 
Mahesana, GJ 384450 
India 
91 2764 267700/01/02
Visit this company's website


Facility : Gujarat, India

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Pumps - Submersible Cables
Jainson Cables 3 Core Flat PVC cables See footnote(s) CLD 23 MLTPL
Jainson Cables 3 Core Flat Rubber cables See footnote(s) CLD 23 MLTPL
Jainson Cables 4 Core Flat PVC cables See footnote(s) CLD 23 MLTPL
Jainson Cables 4 Core Flat Rubber cables See footnote(s) CLD 23 MLTPL

[1] PVC cables are certified for use in well casings 6" to 14" in diameter and with a
    minimum daily flow of 277, 021 L.
[2] Rubber cables are certified for use in well casings 4" to 14" in diameter.
[3] Certified for maximum cable length of 1,000 meters.


 
Jash Engineering Limited 
31, Sector-C, Industrial Area
Sanwer Road, Indore 452015 
Indore, MP 452015 
India 
91 731 6732700
Visit this company's website


Facility : District Dhar (MP), India

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Miscellaneous Process Devices/Components[1]
Butterfly Gates [2] D. HOT MLTPL
Stainless Steel Fabricated Sluice Gates [2] D. HOT MLTPL
Stainless Steel Fabricated Sluice Gates [2] D. HOT MLTPL

[1] Only products bearing the NSF Mark on the product, product packaging, and/or
    documentation shipped with the product are Certified.
[2] Certified for a minimum daily flow rate of 480,000 liters.



 
Jiangsu Membrane Desalor Fluid Technology Co.,Ltd. 
No.10,group 7,Yingquan village
Caobu town,Rudong County 
Nantong, 32 226402 
China 
86 513 8190 9656
Visit this company's website


Facility : # 1 China

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Reverse Osmosis Element[1] [2]
DESALOR BW-4040 FR 4 x 40 in CLD 23 MLTPL
DESALOR BW-8040 FR 8 x 40 in CLD 23 MLTPL
DESALOR LP-4040 FR 4 x 40 in CLD 23 MLTPL
DESALOR LP-8040 FR 8 x 40 in CLD 23 MLTPL

[1] ULP = Ultra Low Pressure
    BW = Brackish Water
    TW = Tap Water
    HR = High Resistant
    FR = Fouling Resistant
[2] Products require the following pre-service flush using tap water at a pressure not to
    exceed 50 psi:
    DESALOR ULP-4040 requires a pre-service flush at a flow rate of 4 GPM (gallons per
    minute) for 24 hours.
    DESALOR ULP-8040 requires a pre-service flush at a flow rate of 12 GPM (gallons per
    minute) for 24 hours.
    DESALOR ULP-4040-HR requires a pre-service flush at a flow rate of 4 GPM (gallons per
    minute) for 24 hours.
    DESALOR ULP-8040-HR requires a pre-service flush at a flow rate of 12 GPM (gallons per
    minute) for 24 hours.
    DESALOR ULP-4040-FR requires a pre-service flush at a flow rate of 4 GPM (gallons per
    minute) for 24 hours.
    DESALOR ULP-8040-FR requires a pre-service flush at a flow rate of 12 GPM (gallons per
    minute) for 24 hours.
    DESALOR BW-4040 requires a pre-service flush at a flow rate of 4 GPM (gallons per
    minute) for 24 hours.
    DESALOR BW-8040 requires a pre-service flush at a flow rate of 12 GPM (gallons per
    minute) for 24 hours.
    DESALOR BW-4040-HR requires a pre-service flush at a flow rate of 4 GPM (gallons per
    minute) for 24 hours.
    DESALOR BW-8040-HR requires a pre-service flush at a flow rate of 12 GPM (gallons per
    minute) for 24 hours.
    DESALOR BW-4040-FR requires a pre-service flush at a flow rate of 4 GPM (gallons per
    minute) for 24 hours.
    DESALOR BW-8040-FR requires a pre-service flush at a flow rate of 12 GPM (gallons per
    minute) for 24 hours.
    DESALOR TW-4040 requires a pre-service flush at a flow rate of 4 GPM (gallons per
    minute) for 24 hours.
    DESALOR TW-8040 requires a pre-service flush at a flow rate of 12 GPM (gallons per
    minute) for 24 hours.



 
Jiangxi Yitian Environmental Protection Equipment Co., Ltd. 
21# Hongye South Road
Chongren High-tech Industrial Park 
Fuzhou, Jiangxi 
China 
86 15902825209


Facility : Fuzhou, China

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Storage Tanks/Reservoirs [G]
YITIAN Glass Fused to Steel Tank[1] >= 40,000 gal CLD 23 MLTPL

[1] Certification includes enamel coated tank panels and sealant only.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



 
Jinan Kinger Industry Corporation 
11th Floor, YongAn Plaza
No.268 Quancheng Road 
Jinan, Shandong 250011 
China 
86 531 8191 3333
Visit this company's website


Facility : Shandong, China

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Fire Hydrants[G]
K19FL 6" CLD 23 MLTPL
K19MJ 6" CLD 23 MLTPL
K29FL 6" CLD 23 MLTPL
K29MJ 6" CLD 23 MLTPL

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

Valves[G]
JKDZ45FMPF 2.5" - 12" CLD 23 MLTPL
JKDZ45FPF 2.5" - 12" CLD 23 MLTPL
JKDZ45MPF 2.5" - 12" CLD 23 MLTPL

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



 
Johnson Screens, Inc. 
1950 Old Highway 8 Northwest
New Brighton, MN 55112 
United States 
800-VEE-WIRE 
651-638-3297
Visit this company's website


Facility : New Brighton, MN

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Water Treatment Devices
Johnson Screens - Flat Panel Intakes[1] [2] [3] [4] CLD 23 MLTPL
Johnson Screens - Flat Support Screen Assemblies[1] [2] [3] [4] CLD 23 MLTPL

[1] Certified for a minimum daily flow of 4,320 gallons.
[2] Only nozzles made from stainless steel are included in the Certification request.
[3] Only products bearing the NSF Mark are Certified.
[4] Size: All sizes
[5] Johnson Screens - Passive Intake Screen A-BB-CCCCA    - T or SB    - Any whole number
    between 12 and 96CCCC - HC, HCE, MF, HCH, HCHE, or MFH.
[6] Certified for a minimum daily flow of 2,880 gallons.



Facility : Forked River, NJ

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Filter Underdrain
PVC Triton Underdrain [1] CLD 23 MLTPL

[1] Certified for a minimum daily flow of 2 gallons/minute per square foot of filter area.



 
Kasco Marine, Inc. 
800 Deere Road
Prescott, WI 54021 
United States 
715-262-4488
Visit this company's website


Facility : Prescott, WI

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Miscellaneous Process Devices/Components[1] [G]
CertiSafe Base Mount[4] [3] CLD 23 MLTPL
CertiSafe Floor Mount[4] [3] CLD 23 MLTPL
CertiSafe Municipal Circulator[4] [3] CLD 23 MLTPL
CertiSafe Municipal Mixer[4] [3] CLD 23 MLTPL
CertiSafe Pipe Mount[4] [3] CLD 23 MLTPL
CertiSafe Surface Aerator[2] [3] CLD 23 MLTPL
CertiSafe Suspended Mount[5] [3] CLD 23 MLTPL
CertiSafe Tank Aerator[2] [3] CLD 23 MLTPL
CertiSafe Tank Circulator[4] [3] CLD 23 MLTPL
CertiSafe Tank Mixer[4] [3] CLD 23 MLTPL
Certisafe Aerator[2] [3] CLD 23 MLTPL
Certisafe Circulator[4] [3] CLD 23 MLTPL
Certisafe Mixer[4] [3] CLD 23 MLTPL
Floor Mount[5] [3] CLD 23 MLTPL
Surface Aerator[2] [3] CLD 23 MLTPL

[1] XXX suffix in trade name refers the to length of the power cord and may be:
    000 - Stub cord
    050 - 50 ft. cord
    100 - 100 ft. cord
    200 - 200 ft. cord
[2] Aerator, Certisafe Aerator, CertiSafe Surface Aerator, Surface Aerator, CertiSafe Tank
    Aerator, and Tank Aerator may have the following model numbers: 5.1AF61XXX and
    8400AF61XXX.
[3] Certified for use in tanks >= 20,000 gallons.
[4] Certisafe Circulator, Certisafe Mixer, Mixer, Circulator, CertiSafe Tank Mixer, Tank
    Mixer, CertiSafe Municipal Mixer, Municipal Mixer, CertiSafe Tank Circulator, Tank
    Circulator, CertiSafe Municipal Circulator, Municipal Circulator, CertiSafe Floor Mount,
    CertiSafe Pipe Mount, CertiSafe Base Mount, Floor Mount, Pipe Mount, and Base Mount may
    have the following model numbers: 2400C61XXX, 3400C61XXX, 3400HC61, 4400C61XXX,
    4400HC61XXX, and 8400C61XXX.
[5] CertiSafe Suspended Mount and Suspended Mount may have the following part numbers:
    2400C61XXX, 3400C61XXX, 3400HC61XXX, 4400C61XXX, and 4400HC61XXX.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



 
KeenSen Technology Co., Ltd. 
No. 370, Minghu Road
Yuelu District 
Hunan 
China 
86 731 8997 2869
Visit this company's website


Facility : Hunan, China

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Reverse Osmosis Element[1] [2] [3]
BW-2521FR 2 1/2" x 21" CLD 23 MLTPL
BW-2540FR 2 1/2" x 40" CLD 23 MLTPL
BW-4021FR 4" x 21" CLD 23 MLTPL
BW-4040FR 4" x 40" CLD 23 MLTPL
BW-4040HF 4" x 40" CLD 23 MLTPL
BW-4040XLFR 4" x 40" CLD 23 MLTPL
BW-8040FR 8" x 40" CLD 23 MLTPL
BW-8040FR-2 8" x 40" CLD 23 MLTPL
BW-8040HF 8" x 40" CLD 23 MLTPL
BW-8040LFR 8" x 40" CLD 23 MLTPL
BW-8040MXFR 8" x 40" CLD 23 MLTPL
BW-8040XLFR 8" x 40" CLD 23 MLTPL
EP-8040FR 8" x 40" CLD 23 MLTPL
EP-8040XLFR 8" x 40" CLD 23 MLTPL
ES-4040HF 4" x 40" CLD 23 MLTPL
ES-4040UFR 4" x 40" CLD 23 MLTPL
ES-8040HF 8" x 40" CLD 23 MLTPL
ES-8040UFR 8" x 40" CLD 23 MLTPL
MTW-8040HF 8" x 40" CLD 23 MLTPL
SW-4040HF 4" x 40" CLD 23 MLTPL
SW-8040HF 8" x 40" CLD 23 MLTPL
SW-8040SHF 8" x 40" CLD 23 MLTPL
ULP-4040HF 4" x 40" CLD 23 MLTPL
ULP-8040HF 8" x 40" CLD 23 MLTPL
XLP-4040HF 4" x 40" CLD 23 MLTPL
XLP-8040HF 8" x 40" CLD 23 MLTPL
ZM-8040FL 8" x 40" CLD 23 MLTPL
ZM-8040FR 8" x 40" CLD 23 MLTPL
ZM-8040UHF 8" x 40" CLD 23 MLTPL

[1] Size is expressed as Diameter x length.
[2] ACR-8040, ALR-8040 models are certified for a minimum daily flow of 10000 gallons.
    AWT-4021  model is certified for a minimum daily flow of 1400 gallons.
    BW-2521, ULP-2521 models are certified for a minimum daily flow of 400 gallons. 
    HW-8040 model is certified for a minimum daily flow of 8,500 gallons. 
    BW-2540FR model is certified for a minimum daily flow of 600 gallons.
    BW-4040, BW-4040-E models are certified for a minimum daily flow of 2,400 gallons.
    BW-4040-2 model is certified for a minimum daily flow of 2,300 gallons.
    BW-4040HF model is certified for a minimum daily flow of 2,900 gallons. 
    BW-4040XLFR model is certified for a minimum daily flow of 2,300 gallons. 
    BW-8040, ULP-8040 models are certified for a minimum daily flow of 10,000 gallons.
    BW-8040HF, XLP-8040HF models are certified for a minimum daily flow of 13,000 gallons. 
    BW-8040MR, BW-8040FR models are certified for a minimum daily flow of 9,500 gallons. 
    BW-8040MXFR model is certified for a minimum daily flow of 11,500 gallons. 
    BW-8040XLFR model is certified for a minimum daily flow of 11,500 gallons. 
    BW-8040LFR,BW-8040-2,ULP-8040MR-2, BW-8040-E, BW-8040FR-2, ES-8040UFR models are
    Certified for a minimum daily flow of 10,500 gallons. 
    EP-8040HRLE is certified for a minimum daily flow of 10400 gallons.
    EP-8040XLFR and SW-8040SHF are certified for a minimum daily flow of 8400 gallons.
    ES-8040HF,MTW-8040HF model is certified for a minimum daily flow of 12000 gallons.
    HES-8040 and SOR-8040 are certified for a minimum daily flow of 7000 gallons.
    HP-8040, ZM-8040UHP and ZM-8040FL are certified for a minimum daily flow of 6500
    gallons.
    MTW-8040HR ,MS-8040H  models are certified for a minimum daily flow of 8000 gallons.
    MS-8040L model is certified for a minimum daily flow of 10000 gallons.
    SU-8040LE and SU-8040XLE are certified for a minimum daily flow of 9500 gallons.
    SW-2521, BW-2521FR models are certified for a minimum daily flow of 250 gallons. 
    SW-2540 model is certified for a minimum daily flow of 500 gallons. 
    SW-4021 model is certified for a minimum daily flow of 700 gallons. 
    SW-4040, BW-4040FR models are certified for a minimum daily flow of 2,000 gallons. 
    SW-4040HF is certified for a minimum daily flow of 1600 gallons.
    SW-4040HR model is certified for a minimum daily flow of 1,500 gallons.
    SW-8040,MS-8040M models are certified for a minimum daily flow of 9,000 gallons.
    SW-8040 model is certified for a minimum daily flow of 9,000 gallons. 
    SW-8040HF model is certified for a minimum daily flow of 9000 gallons.
    SW-8040HR model is certified for a minimum daily flow of 6,500 gallons. 
    SW-8040MR model is certified for a minimum daily flow of 7,500 gallons.
    SW-8040XHR  model is certified for a minimum daily flow of 7000 gallons.
    UHP-8040P120 is certified for a minimum daily flow of 8500 gallons.
    UHP-8040P70 is certified for a minimum daily flow of 5500 gallons.
    ULP-2540 model is certified for a minimum daily flow of 750 gallons. 
    ULP-4021 model is certified for a minimum daily flow of 950 gallons.
    ULP-4021HR is certified for a minimum daily flow of 640 gallons. 
    ULP-4040 model is certified for a minimum daily flow of 2,600 gallons. 
    ULP-4040-2 model is certified for a minimum daily flow of 2,200 gallons. 
    ULP-4040HF model is certified for a minimum daily flow of 2,700 gallons. 
    ULP-4040HR, SW-4040MR models are certified for a minimum daily flow of 1,800 gallons. 
    ULP-4040MR model is certified for a minimum daily flow of 2,200 gallons. 
    ULP-8040HF model is certified for a minimum daily flow of 12,500 gallons. 
    XLP-2521 model is certified for a minimum daily flow of 400 gallons. 
    XLP-2540, BW-2540, BW-4021FR models are certified for a minimum daily flow of 750
    gallons.
    XLP-4021, BW-4021 models are certified for a minimum daily flow of 950 gallons. 
    XLP-8040, ULP-8040 models are certified for a minimum daily flow of 11,000 gallons. 
    ULP-8040-2 ,MS-8040L model is certified for a minimum daily flow of 10,000 gallons.
    ULP-4040MR, ES-4040UFR models are certified for 
[3] All models 2.5” in diameter require a 2 gpm flush for 24 hours using tap water.
    All models 4” in diameter require a 4 gpm flush for 24 hours using tap water.
    All models 8” in diameter require a 15 gpm flush for 24 hours using tap water.
[4] Trade name XLP is certified for a minimum daily permeate generation of 60 gallons per
    square inch of membrane surface area.
    Trade name ULP is certified for a minimum daily permeate generation of 24 gallons per
    square inch of membrane surface area.
    Trade name BW is certified for a minimum daily permeate generation of 24 gallons per
    square inch of membrane surface area.
    Trade name SW is certified for a minimum daily permeate generation of 17 gallons per
    square inch of membrane surface area.
[5] Models require the following flushing procedure:
    Model XLP requires a 4 lpm flush for 24 hours
    Model ULP requires a 4 lpm flush for 24 hours
    Model BW requires a 4 lpm flush for 24 hours
    Model SW requires a 5 lpm flush for 24 hours



 
Kitz Corporation 
Tokyo Shiodome Building
1-9-1, Higashi-Shimbashi 
Minato-ku, Tokyo 105-7305 
Japan 
81 43 299 1732
Visit this company's website


Facility : # 1 Japan

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Valves [G]
(TY) AKSZAN (5044ALF)[1] 1 1/4" - 2" C. HOT MLTPL
(TY) AKSZANW (5044WLF)[1] 1 1/4" - 2" C. HOT MLTPL
(TY) CSZAN (5049ALF)[1] 1 1/4" - 2" C. HOT MLTPL
(TY) CSZANW (5049WLF)[1] 1 1/4" - 2" C. HOT MLTPL
AKTAFCN (868C) 1/2" - 3/4" C. HOT MLTPL
AKTAFMN (868M) 1/4" - 2" C. HOT MLTPL
AKTAFN (868) 1/4" - 2" C. HOT MLTPL
AKTFDN (868AD) 1/2" - 1" C. HOT MLTPL
AKTFMNLL (868AMLL) 1/2" - 2" C. HOT MLTPL
CTAFCN (869C) 1/2" - 3/4" C. HOT MLTPL
CTAFMN (869M) 3/8" - 2" C. HOT MLTPL
CTAFN (869) 3/8" - 2" C. HOT MLTPL
CTFDN (869AD) 1/2" - 1" C. HOT MLTPL
CTFMNLL (869AMLL) 1/2" - 2" C. HOT MLTPL
PCTAFMN (869MXL) 1/2" - 2" C. HOT MLTPL

[1] Only products bearing the NSF Mark are Certified.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



Facility : Nagano, Japan

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Check Valve[1] [G]
125FCSR (8910) 2 1/2" - 12" C. HOT MLTPL

[1] Only products bearing the NSF Mark are Certified.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



Facility : Amatanakorn, Thailand

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Valves[G]
Grooved End Butterfly Valve / 300SGECE 2" - 12" CLD 23 MLTPL

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



Facility : Samutprakarn, Thailand

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Valves[1] [G]
(RW02) AK125CN (211ALF) 1/2" - 2" CLD 23 MLTPL
(RW02) AKHN (206ALF) 1/2" - 2" CLD 23 MLTPL
(RW02) AKTAFCN (5046LF) 1/2" - 3/4" C. HOT MLTPL
(RW02) AKYRN (236ALF) 1/2" - 2" CLD 23 MLTPL
(RW02) AKYRNT (236TLF) 1/2" - 2" CLD 23 MLTPL
(RW02) C125CN (212ALF) 1/2" - 2" CLD 23 MLTPL
(RW02) CHN (207ALF) 1/2" - 2" CLD 23 MLTPL
(RW02) CYRN (237ALF) 1/2" - 2" CLD 23 MLTPL
(TY) AKSZAN (5044ALF) 1/4"-1", 2 1/2"-3" C. HOT MLTPL
(TY) AKSZANW (5044WLF) 1/4" - 1" C. HOT MLTPL
(TY) CSZAN (5049ALF) 1/2"-1", 2 1/2"-3" C. HOT MLTPL
(TY) CSZANW (5049WLF) 1/2" - 1" C. HOT MLTPL
AKAFN (836) 1/2" - 2" CLD 23 MLTPL
AKFSN (807) 1/2" - 2" C. HOT MLTPL
AKTAFCN (868C) 1/2" - 3/4" C. HOT MLTPL
AKTAFMN (868M) 1/4" - 1" C. HOT MLTPL
AKTAFN (868) 1/4" - 1" C. HOT MLTPL
AKTFDN (868AD) 1/2" - 1" C. HOT MLTPL
AKTFMNLL (868AMLL) 1/2" - 1" C. HOT MLTPL
CAFN (826) 1/2" - 2" CLD 23 MLTPL
CTAFCN (869C) 1/2" - 3/4" C. HOT MLTPL
CTAFMN (869M) 3/8" - 1" C. HOT MLTPL
CTAFN (869) 3/8" - 1" C. HOT MLTPL
CTFDN (869AD) 1/2" - 1" C. HOT MLTPL
CTFMNLL (869AMLL) 1/2" - 1" C. HOT MLTPL

[1] Only products bearing the NSF Mark are Certified.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



 
Kovalus Separation Solutions, LLC 
850 Main Street
Wilmington, MA 01887 
United States 
978-694-7000
Visit this company's website


Facility : # 2

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Nanofiltration Devices
SPIRAL,TFC 8040-SR100-400 8" x 40" CLD 23 MLTPL
SPIRAL,TFC 8040-SR100-400-34 8" x 40" CLD 23 MLTPL
SPIRAL,TFC 8040-SR200-400 8" x 40" CLD 23 MLTPL
SPIRAL,TFC 8040-SR200-400-34 8" x 40" CLD 23 MLTPL

Reverse Osmosis Element[1] [2]
SPIRAL,TFC 4040-HR 4" x 40" CLD 23 MLTPL
SPIRAL,TFC 4040-ULP™ 4" x 40" CLD 23 MLTPL
SPIRAL,TFC 8040-HR-400 8" x 40" CLD 23 MLTPL
SPIRAL,TFC 8040-HR-400-34 8" x 40" CLD 23 MLTPL
SPIRAL,TFC 8040-HR-440-28 8" x 40" CLD 23 MLTPL
SPIRAL,TFC 8040-ULP-400 8" x 40" CLD 23 MLTPL

[1] SPIRAL,TFC 4040-HR model is certified for a minimum daily flow of 9,100 liters per day.
    SPIRAL,TFC 4040-ULP™ model is certified for a minimum daily flow of 9,500 liters per
    day.
    SPIRAL,TFC 8040-ULP-400, SPIRAL,TFC 8040-HR-400, and SPIRAL,TFC 8040-HR-400-34 model is
    certified for a minimum daily flow of 42,000 liters per day.
    SPIRAL,TFC 8040-HR-440-28 model is certified for a minimum daily flow of 44,940 liters
    per day.				
    
[2] SPIRAL,TFC 4040-HR and SPIRAL,TFC 4040-ULP™ should be flushed at 1.7 gallons per minute
    for 1 hour with tap water.
    SPIRAL,TFC 8040-HR-400 , SPIRAL,TFC 8040-ULP-400, and SPIRAL,TFC 8040-HR-400-34 should
    be flushed at 7.7 gallons per minute for 1 hour with tap water.
    SPIRAL,TFC 8040-HR-440-28 should be flushed at 8.24 gallons per minute for 1 hour with
    tap water.



 
Krohne Altometer 
Kerkeplaat 12
Dordrecht 
3313 LC 
The Netherlands 
31 786306300
Visit this company's website


Facility : Dordrecht, The Netherlands

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Water Meters[1] [2] [G]
OPTIFLUX 2000 y[3] [4] CLD 23 MLTPL
OPTIFLUX 2xxx y[3] [4] CLD 23 MLTPL
OPTIFLUX 2000 y [5] [6] CLD 23 MLTPL
OPTIFLUX 2xxx y[5] [6] CLD 23 MLTPL
WATERFLUX 3000 y[8] [7] CLD 23 MLTPL
WATERFLUX 3xxx y[8] [7] CLD 23 MLTPL

[1] Only products bearing the NSF Mark on the product, product packaging, and/or
    documentation shipped with the product are Certified.
[2] "xxx" in the trade name can be any 3-digit number and identifies the model of the
    electronics unit (non-wetted part), and "y" is any character or series of characters
    identifying electronics unit options.
[3] Certified product contains Hastelloy C-22, Hastelloy C-4 or Stainless Steel 1.4571
    electrodes, hard rubber liner, and optional Stainless Steel grounding rings.
[4] DN25 - DN3000/1" - 120"
[5] Certified product contains Hastelloy C-22, Hastelloy C-4 or Stainless Steel 1.4571
    electrodes, polypropylene liner, and optional Stainless Steel grounding rings.
[6] DN25 - DN150/1" - 6"
[7] DN25 - DN 600/1" - 24"
[8] Certified product contains Hastelloy C-22 or Stainless Steel electrodes, optional
    Stainless Steel PT sensor, coated liner, o-rings, and optional Stainless Steel grounding
    rings.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



 
KROHNE, Inc. 
55 Cherry Hill Drive
Beverly, MA 01915 
United States 
800-356-9464 
978-535-6060
Visit this company's website


Facility : Embu-Sao Paulo, Brazil

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Water Meters[1] [2] [G]
OPTIFLUX 2000 y 1" - 120" CLD 23 MLTPL
OPTIFLUX 2xxx y 1" - 120" CLD 23 MLTPL
WATERFLUX 3000 y 1" - 120" CLD 23 MLTPL
WATERFLUX 3xxx y 1" - 120" CLD 23 MLTPL

[1] Only products bearing the NSF Mark are Certified.
[2] "xxx" in the trade name can be any 3-digit number and identifies the model of the
    electronics unit (non-wetted part), and "y" is any character or series of characters
    identifying electronics unit options.
    
    The Letters "KC" may or may not appear in the Model Name to indicate the facility
    location as Embu-Sao Paulo, Brazil.
    
    Certified product contains Hastelloy C-22, Hastelloy C-4, or Stainless Steel electrodes,
    a hard rubber liner, and optional Stainless Steel grounding rings. 
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



 
KSB SE & Co. KGaA 
Johann-Klein-Str. 9
67227 Frankenthal 
Germany 
49 6233 86 0
Visit this company's website


Facility : Halle (Saale), Germany

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Pumps [G]
RDLO (A)-(B)-(C)(D)(E)(F)[3] [4] 350mm - 800mm CLD 23 MLTPL
Omega (A)-(B)-(C)(D)(E)(F)[1] [2] 80mm - 500mm CLD 23 MLTPL

[1] Certified for a minimum daily flow of 600,000 liters.
[2] Omega (A)-(B)- (C) (D) (E) (F) represents the following:
    A: Nominal discharge nozzle diameter (mm)
    B: Nominal impeller diameter (mm)
    C: Impeller type
    D: Material variant (SC)
    E: Mechanical seal (G)
    F: Grease lubricated bearings (F)
[3] Certified for a minimum daily flow of 24,000,000 liters.
[4] RDLO (A)-(B)- (C) (D) (E) (F) represents the following:
    A: Nominal discharge nozzle diameter (mm)
    B: Nominal impeller diameter (mm)
    C: Impeller type
    D: Material variant (SC)
    E: Mechanical seal (G)
    F: Grease lubricated bearings (F)
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



 
Kuraray Co., Ltd. 
Tokiwabashi Tower, 2-6-4
Otemachi, Chiyoda-ku 
Tokyo 100-0004 
Japan 
81 3 6701 1655
Visit this company's website


Facility : Okayama, Japan

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Ultrafiltration Devices[1] [2]
GL-0101-S4 20.7 cm x 142.1 cm CLD 23 MLTPL
GL-0101-S6 20.7 cm x 142.1 cm CLD 23 MLTPL
GL-0101-S6L 20.7 cm x 142.1 cm CLD 23 MLTPL

[1] Certified to a minimum daily flow of 24,000 liters.
[2] Models GL-0101-S4, GL-0101-S6 and GL-0101-S6L must be flushed with tap water at 25
    liters per minute for 5 minutes.



 
Lamor Water Technology Oy 
Rihkamatori 2
Porvoo 
06100 Finland 
Finland 
358 40 352 63 04


Facility : Yalova, Turkey

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Ultrafiltration Devices
LAMOR APM 80T[1] [2] 25 x 221.5 +/- 0.2cm CLD 23 MLTPL

[1] Certified for a minimum daily flow 86,400 liters.
[2] Membranes should be flushed with tap water before being placed into service at the rate
    of 60 liters per minute for 240 minutes.



 
Lansdale Valve and Manufacturing 
1050 Broadway
Westville, NJ 08093 
United States 
800-908-0523


Facility : Qingdao, China

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Valves
Center-Line Butterfly Valve /LV-MFBFV 3"-24" D. HOT MLTPL
Center-Line Butterfly Valve/ LV-FBFV 3"-24" D. HOT MLTPL
Center-Line Butterfly Valve/ LV-MJBFV 3"-24" D. HOT MLTPL
Lug Butterfly Valve/ LV-LBFV 50-600 mm D. HOT MLTPL
Wafer Butterfly Valve/ LV-LWBFV 50-600 mm D. HOT MLTPL
Wafer Butterfly Valve/LV-WBFV 50-600 mm D. HOT MLTPL



 
Legend 
300 North Opdyke Road
Auburn Hills, MI 48326 
United States 
800-752-2082 
586-566-7400


Facility : D'Opaglio (NO), Italy

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Backflow Preventers[G]
Dual Check Valve T-457NL 1/2", 3/4", 1" CLD 23 MLTPL

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] The ball in the valve is plated and the valve body is unplated.


 
Lexcru Water Tech Pvt Ltd. 
D-601/602, Saral Icon
Opposite Reliance Petrol Pump 
Vastral, Ahmedabad, Gujarat 382415 
Ahmedabad, GJ 382415 
India 
800-889-2607 
91 962 4007888
Visit this company's website


Facility : Ahmedabad, Gujarat, India

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Reverse Osmosis Element
BWFR 4040[1] [2] 4" x 21" CLD 23 MLTPL
BWFR 8040[1] [2] 4" x 80" CLD 23 MLTPL
HF 4040[1] [2] 4" x 40" CLD 23 MLTPL
HF 4040[1] [2] 4" x 40" CLD 23 MLTPL
HF 8040[1] [2] 4" x 80" CLD 23 MLTPL
HF 8040[1] [2] 4" x 80" CLD 23 MLTPL

[1] Certified for the following minimum daily flow rates: 
    Models sized 4" x 40" are certified for a minimum flow of 2,000 liters per day.
    Models sized 8" x 40" are certified for a minimum flow of 8,000 liters per day.
    Models sized 4" x 21" are certified for a minimum flow of 1,080 liters per day.
[2] These models require the following flush:
    Models sized 4" x 40" require a 2 hour flush at a flow rate of 4.166 liters per minute
    (Lpm) with tap water.
    Models sized 8" x 40" require a 2 hour flush at a flow rate of 16.67 liters per minute
    (Lpm) with tap water.
    Models sized 4" x 21" require a 2 hour flush at a flow rate of 2 liters per minute (Lpm)
    with tap water.



 
Liquitech Inc. 
640 Oakmont Lane
Westmont, IL 60559 
United States 
800-635-7873 
630-693-0500
Visit this company's website


Facility : Westmont, IL

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Chemical Generators[1] [2] [3] [G]
QF7 4" D. HOT MLTPL
QF14 4" D. HOT MLTPL
QF16 4" D. HOT MLTPL
QF23 4" D. HOT MLTPL
QF42 3" D. HOT MLTPL
QFW16 4" D. HOT MLTPL

[1] Certified for a minimum flow of 15,663 gallons per day.
[2] Certification is for health effects only and does not address the disinfection efficacy
    of the product.
[3] The finished drinking water shall be monitored per manufacturer's instructions and the
    units controlled to ensure that levels of copper do not exceed 0.8 mg/L, and the levels
    of silver do not exceed 0.08 mg/L.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



 
M&H Valve Co. Division of McWane, Inc. 
P.O. Box 2088
Anniston, AL 36202 
United States 
256-237-3521


Facility : Anniston, AL

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Fire Hydrants
Style 129 Fire Hydrant[G] 4 1/2", 5 1/4" CLD 23 MLTPL
Style 929 Fire Hydrant[G] 5 1/4" CLD 23 MLTPL
iHydrant[G] 4 1/2", 5 1/4" CLD 23 MLTPL

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

Valves
Rubber Face Check Valve (RFCV)[G] >= 3" CLD 23 MLTPL

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



 
MANN+HUMMEL (China) Life Science & Environmental Co., Ltd. 
Building No. 7, No. 555 Dujuan Road
Kunshan, Jiangsu 215300 
China 
86 512 8163 6999


Facility : Suzhou, Jiangsu, China

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Ultrafiltration Devices[1] [2] [G]
PureULTRA PHF-107-V 9.8" x 92.9" CLD 23 MLTPL
PureULTRA PHF-60-V 9.8" x 59.3" CLD 23 MLTPL
PureULTRA PHF-80-V 9.8" x 73.2" CLD 23 MLTPL

[1] Certified for the following minimum daily flow rates:
    PureULTRA PHF-60-V is certified for a minimum flow of 24,000 liters per day.
    PureULTRA PHF-80-V is certified for a minimum flow of 36,000 liters per day.
    PureULTRA PHF-120-V is certified for a minimum flow of 48,000 liters per day.
[2] These models require a 100 minute pre-service flush at a flow rate of 7 gallons per
    minute (gpm) with tap water.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



 
MANN+HUMMEL Water & Fluid Solutions GmbH 
Kasteler Strasse 45
65203 Wiesbaden 
Germany 
49 0 611 9 62 6001
Visit this company's website


Facility : Fano (PU), Italy

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Reverse Osmosis Element[1] [2] [3]
4021-NF7[4] 4" x 21" CLD 23 MLTPL
4021-NF9[4] 4" x 21" CLD 23 MLTPL
4040-FR[4] 4" x 40" CLD 23 MLTPL
4040-NF7[4] 4" x 40" CLD 23 MLTPL
4040-NF7+[4] 4" x 40" CLD 23 MLTPL
4040-NF9[4] 4" x 40" CLD 23 MLTPL
4040-NF9+[4] 4" x 40" CLD 23 MLTPL
8040-FR-365[4] 8" x 40" CLD 23 MLTPL
8040-FR-400/34[4] 8" x 40" CLD 23 MLTPL
8040-NF7-400[5] 8" x 40" CLD 23 MLTPL
8040-NF9-400 [5] 8" x 40" CLD 23 MLTPL

[1] Sizes indicated are expressed as diameter x length.
[2] Certified for a minimum permeate (product water) flow of 1,191 L/day.
[3] Only products bearing the NSF Mark on the product, product packaging, and/or
    documentation shipped with the product are Certified.
[4] Certified elements must be flushed of preservative in the field for a minimum of 2 hours
    at the following parameters:
    8040-BW-440 11555 l/h at 225 psi	
    8040-BW-400/34 11555 l/h at 225 psi	
    8040-FR-365 12000 l/h at 225 psi	
    8040-FR-400/34 12000 l/h at 225 psi	
    4040-BW 900 l/h at 225 psi	
    4040-FR 1000 l/h at 225 psi	
    4040-LE 1000 l/h at 150 psi	
    4040-XRLE/34 1000 l/h at 150 psi	
    4040-XLE 1000 l/h at 150 psi	
    8040-XLE-400/34 12,610 l/h at 100 psi	
    4040-TW 900 l/h at 225 psi	
    4040-LE+ 1000 l/h at 150 psi	
    4040-XRLE+ 1000 l/h at 150 psi	
    4040-HRLE 1000 l/h at 150 psi	
    4040-XRLE 1000 l/h at 150 psi	
    4040-ULE+ 1000 l/h at 150 psi	
    4040-ULE 1000 l/h at 150 psi	
    4040-XLE+ 1000 l/h at 150 psi
    4021-SWL, 4040-SWL, 4021-SWH and 4040-SWH at 1500 l/h at 500 psi
    8040-SEH-400 and 8040-SWH-440 at 12000 l/h at 500 psi
    8040-SWL-400 and 8040-SWL-440 at 15000 l/h at 500 psi
    4021-NF7, 4040-NF7, 4040-NF7+, 4021-NF9, 4040-NF9, 4040-NF9+ at 1000 l/h at 100 psi
[5] Certified elements must be flushed of preservative in the field for a minimum of 1 hour
    at the following parameters:
    8040-BW-365 10,530 l/hr at 225 psi	
    8040-BW-400 11,555 l/hr at 225 psi	
    8040-LE-400 12,610 l/h at 150 psi	
    8040-LE-440 13,890 l/h at 150 psi	
    8040-LE-400/34 12,000 l/ hr at 150 psi	
    8040-XLE-400 12,610 l/h at 100 psi	
    8040-XLE-440 13,890 l/h at 100 psi	
    4040-XLE/34 1000 l/h at 150 psi	
    8040-HRLE-400 9,745 l/h at 150 psi	
    8040-XRLE-400 9,745 l/h at 150 psi	
    8040-HRLE-440 12,610 l/h at 150 psi	
    8040-XRLE-440 12,610 l/h at 150 psi	
    8040-HRLE-400/34 12,000 l/ hr at 150 psi	
    8040-XRLE-400/34 12,000 l/ hr at 150 psi	
    8040-ULE-400 12,610 l/h at 150 psi	
    8040-ULE-440 13,890 l/h at 150 psi
    8040-NF7-400 and 8040-NF9-400 at 12000 l/h at 100 psi 



 
MANN+HUMMEL Water & Fluid Solutions S.p.A. 
Via Della Pineta 23
61032 Fano (PU) 
Italy 
39 07 211 796201
Visit this company's website


Facility : Fano (PU), Italy

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Reverse Osmosis Element[1]
BR2 4040 H-S Reverse Osmosis Filtration Membrane Element[2] [3] 4" x 40" CLD 23 MLTPL
BR2 4040 Reverse Osmosis Filtration Membrane Element[2] [3] 4" x 40" CLD 23 MLTPL
BR2 8040 Reverse Osmosis Filtration Membrane Element[2] [4] 8" x 40" CLD 23 MLTPL
BR2L 4040 Reverse Osmosis Filtration Membrane Element[2] [3] 4" x 40" CLD 23 MLTPL
BR3 8040 Reverse Osmosis Filtration Membrane Element[2] [4] 8" x 40" CLD 23 MLTPL
BR34 8040 Reverse Osmosis Filtration Membrane Element[2] [3] 8" x 40" CLD 23 MLTPL
BR3G 8040 Reverse Osmosis Filtration Membrane Element[2] [3] 8" x 40" CLD 23 MLTPL
FOUL1 4040[2] [3] 4" x 40" CLD 23 MLTPL
FOUL1 8040 Reverse Osmosis Filtration Membrane Element[2] [3] 8" x 40" CLD 23 MLTPL
FOUL2G 8040 Reverse Osmosis Filtration Membrane Element[2] [3] 8" x 40" CLD 23 MLTPL
FOUL1L 4040 Reverse Osmosis Filtration Membrane Element[2] [3] 4" x 40" CLD 23 MLTPL
LOW1 4040 H-S Reverse Osmosis Filtration Membrane Element[2] [3] 4" x 40" CLD 23 MLTPL
LOW1 4040 Reverse Osmosis Filtration Membrane Element[2] [3] 4" x 40" CLD 23 MLTPL
LOW1 8040 Reverse Osmosis Filtration Membrane Element[2] [4] 8" x 40" CLD 23 MLTPL
LOW14 8040 Reverse Osmosis Filtration Membrane Element[2] [4] 8" x 40" CLD 23 MLTPL
LOW2 4040 Reverse Osmosis Filtration Membrane Element[2] [3] 4" x 40" CLD 23 MLTPL
LOW2 4040 H-S Reverse Osmosis Filtration Membrane Element[2] [3] 4" x 40" CLD 23 MLTPL
LOW2-HR 4040 Reverse Osmosis Filtration Membrane Element[2] [3] 4" x 40" CLD 23 MLTPL
LOW2G-HR-4040 Reverse Osmosis Filtration Membrane Element [2] [3] 4" x 40" CLD 23 MLTPL
LOW2L 4040 Reverse Osmosis Filtration Membrane Element[2] [3] 4" x 40" CLD 23 MLTPL
LOW2 8040 Reverse Osmosis Filtration Membrane Element[2] [4] 8" x 40" CLD 23 MLTPL
LOW2-HR 8040 Reverse Osmosis Filtration Membrane Element[2] [4] 8" x 40" CLD 23 MLTPL
LOW2G-8040 Reverse Osmosis Filtration Membrane Element[2] [4] 8" x 40" CLD 23 MLTPL
LOW2G-HR 8040 Reverse Osmosis Filtration Membrane Element[2] [4] 8" x 40" CLD 23 MLTPL
LOW24 8040 Reverse Osmosis Filtration Membrane Element[2] [4] 8" x 40" CLD 23 MLTPL
LOW24-HR 8040 Reverse Osmosis Filtration Membrane Element[2] [4] 8" x 40" CLD 23 MLTPL
LOW3 4040 H-S Reverse Osmosis Filtration Membrane Element[2] [3] 4" x 40" CLD 23 MLTPL
LOW3 4040 Reverse Osmosis Filtration Membrane Element[2] [3] 4" x 40" CLD 23 MLTPL
LOW3 8040 Reverse Osmosis Filtration Membrane Element[2] [4] 8" x 40" CLD 23 MLTPL
LOW34-8040 Reverse Osmosis Filtration Membrane Element[2] [4] 8" x 40" CLD 23 MLTPL
LOW4 4040 H-S Reverse Osmosis Filtration Membrane Element[2] [3] 4" x 40" CLD 23 MLTPL
LOW4 4040 Reverse Osmosis Filtration Membrane Element[2] [3] 4" x 40" CLD 23 MLTPL
LOW4 8040 Reverse Osmosis Filtration Membrane Element[2] [4] 8" x 40" CLD 23 MLTPL
LOW44 8040 Reverse Osmosis Filtration Membrane Element[2] [4] 8" x 40" CLD 23 MLTPL
LOW4G-4040 Reverse Osmosis Filtration Membrane Element[2] [3] 4" x 40" CLD 23 MLTPL
LOW4G-8040 Reverse Osmosis Filtration Membrane Element[2] [4] 8" x 40" CLD 23 MLTPL
LOW4L 4040 Reverse Osmosis Filtration Membrane Element[2] [3] 4" x 40" CLD 23 MLTPL

[1] Sizes indicated are expressed as diameter x length.
[2] Certified for a minimum permeate (product water) flow of 1,191 L/day.
[3] Certified elements must be flushed of preservative in the field for a minimum of 2 hours
    at the following parameters:
    BR34 8040 11555 l/h at 225 psi
    BR3G 8040 11555 l/h at 225 psi
    FOUL1 8040 12000 l/h at 225 psi
    FOUL2G 8040 12000 l/h at 225 psi
    LOW4 4040, 1000 l/h at 150 psi
    LOW4-4014 1000 l/h at 150 psi
    LOW4-4014 XL 1000 l/h at 150 psi
    LOW4-4018 1000 l/h at 150 psi
    LOW4-4018 XL 1000 l/h at 150 psi
    LOW4-4021 1000 l/h at 150 psi
    LOW4-4021 XL 1000 l/h at 150 psi
    LOW4-4029 XL 1000 l/h at 150 psi
    LOW4-4040 XL 1000 l/h at 150 psi
    LOW1 4040 H-S, 1000 l/h at 150 psi
    LOW2 4040 H-S, 1000 l/h at 150 psi
    LOW3 4040 H-S, 1000 l/h at 150 psi
    LOW4 4040 H-S, 1000 l/h at 150 psi
    LOW2L 4040, 1000 l/h at 150 psi
    LOW2G-HR-4040 1000 l/h at 150 psi
    LOW1-4014, 1000 l/h at 150 psi
    LOW1-4014 XL, 1265 l/h at 150 psi
    LOW1-4018 1000 l/h at 150 psi
    LOW1-4018 XL 1000 l/h at 150 psi
    LOW1-4021 1000 l/h at 150 psi
    LOW1-4021 XL 1000 l/h at 150 psi
    LOW1-4040 XL 1000 l/h at 150 psi
    LOW2-4014 1000 l/h at 150 psi
    LOW2-4014 XL 1000 l/h at 150 psi
    LOW2-4018 1000 l/h at 150 psi
    LOW2-4018 XL 1000 l/h at 150 psi
    LOW2-4021 1000 l/h at 150 psi
    LOW2-4021 XL 1000 l/h at 150 psi
    LOW2-4040 XL 1000 l/h at 150 psi
    LOW3-4014 1000 l/h at 150 psi
    LOW3-4014 XL 1000 l/h at 150 psi
    LOW3-4018 1000 l/h at 150 psi
    LOW3-4018 XL 1000 l/h at 150 psi
    LOW3-4021 1000 l/h at 150 psi
    LOW3-4021 XL 1000 l/h at 150 psi
    LOW3-4040 XL 1000 l/h at 150 psi
    LOW2-HR 4040, 1000 l/h at 150 psi
    LOW1-4611 1500 l/h at 150 psi
    LOW1-4641 1500 l/h at 150 psi
    LOW2-4611 1500 l/h at 150 psi
    LOW2-4641 1500 l/h at 150 psi
    LOW3-4611 1500 l/h at 150 psi
    LOW3-4641 1500 l/h at 150 psi
    BR2 4040 H-S, 900 l/h at 225 psi
    BR2L 4040, 900 l/h at 225 psi
    FOUL1L 4040, 1000 l/h at 225 psi
    BR2-4014 1000 l/h at 225 psi
    BR2-4021 1000 l/h at 225 psi
    BR2-4641 1500 l/h at 225 psi
    BR2 4040, 900 l/h at 225 psi
    LOW1 4040, 1000 l/h at 150 psi
    LOW2 4040, 1000 l/h at 150 psi
    LOW3 4040, 1000 l/h at 150 psi
    LOW4G-4040 1000 l/h at 1000 psi
    LOW4L 4040, 1000 l/h at 100 psi
    FOUL1 4040 at 1000 l/h at 225 psi
    LOW7-4040 at 1000 l/h at 125 psi
    NANO7-4021, NANO7-4040, NANO7-4040 H-S, NANO9-4021, NANO9-4040 and NANO9-4040 H-S at
    1000 l/h at 100 psi
    SEA2 4021, SEA2 4040, SEA5 4021, and SEA5 4040 at 1500 l/h at 500 psi
    SEA4 8040 and SEA44 8040 at 12000 l/h at 500 psi
    SEA5 8040 and SEA54 8040 at 15000 l/h at 500 psi
[4] Certified elements must be flushed of preservative in the field for a minimum of 1 hour
    at the following parameters:
    LOW1 8040, 12,610 l/h at 150 psi
    LOW14 8040, 13,890 l/h at 150 psi
    LOW2 8040 9745 l/h at 150 psi
    LOW24 8040 12610 l/h at 150 psi
    LOW3 8040, 14,725 l/h at 150 psi
    LOW34-8040 13,890 l/h at 100 psi
    LOW4 8040 12610 l/h at 100 psi
    LOW44 8040, 13,890 l/h at 100 psi
    LOW2HR-8040 9745 l/h at 150 psi
    LOW24-HR 8040 12610 l/h at 150 psi
    LOW2G HR 8040 9745 l/h at 150 psi
    BR2 8040, 10,530 l/hr at 225 psi
    BR3 8040, 11,555 l/hr at 225 psi
    LOW1G-8040 12,000 l/ hr at 150 psi
    LOW2G-8040 12,000 l/h at 100 psi
    LOW4G-8040 12,000 l/h at 100 psi
    NANO7-8040 and NANO9-8040 at 12000 l/h at 100 psi
[5] All models are certified to a minimum daily flow of 1,737 liters per day. All models
    must be flushed of preservative in the field for a minimum of 2 hours at a flow rate of
    1,000 l/h at 150 psi.

NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
      documentation shipped with the product are Certified.


 
MANN+HUMMEL Water & Fluid Solutions, Inc. 
93 South La Patera Lane
Goleta, CA 93117 
United States 
805-964-8003


Facility : Goleta, CA

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Reverse Osmosis Element
4040-ACM2-TSFN[1] 4" x 40" CLD 23 MLTPL
4040-ACM2-TWFN[1] 4" x 40" CLD 23 MLTPL
4040-ACM4-TSFN[1] 4" x 40" CLD 23 MLTPL
4040-ACM4-TWFN[1] 4" x 40" CLD 23 MLTPL
4040-ACM5-TSFN[1] 4" x 40" CLD 23 MLTPL
4040-ACM5-TWFN[1] 4" x 40" CLD 23 MLTPL
8040-ACM2-TSFN[1] 8" x 40" CLD 23 MLTPL
8040-ACM2-UWFN[1] 8" x 40" CLD 23 MLTPL
8040-ACM3-TSFN[1] 8" x 40" CLD 23 MLTPL
8040-ACM3-UWFN[1] 8" x 40" CLD 23 MLTPL
8040-ACM4-TSFN[1] 8" x 40" CLD 23 MLTPL
8040-ACM4-UWFN[1] 8" x 40" CLD 23 MLTPL
8040-ACM5-TSFN[1] 8" x 40" CLD 23 MLTPL
8040-ACM5-UWFN[1] 8" x 40" CLD 23 MLTPL
8540-ACM2-TSFN[1] 8.5" x 40" CLD 23 MLTPL
8540-ACM2-UWFN[1] 8.5" x 40" CLD 23 MLTPL
8540-ACM4-TSFN[1] 8.5" x 40" CLD 23 MLTPL
8540-ACM4-UWFN[1] 8.5" x 40" CLD 23 MLTPL
8540-ACM5-TSFN[1] 8.5" x 40" CLD 23 MLTPL
8540-ACM5-UWFN[1] 8.5" x 40" CLD 23 MLTPL
TRISEP® 8040-SB20-TSFA[1] 8" x 40" CLD 23 MLTPL
TRISEP® 8040-SB50-TSFA[1] 8" x 40" CLD 23 MLTPL
TRISEP® 8040-SB90-TSFA[1] 8" x 40" CLD 23 MLTPL
TurboClean® Bev 8040-NF-CA[2] 7.9" x 40" CLD 23 MLTPL
TurboClean® Bev 8040-NF-CA-O[2] 7.9" x 40" CLD 23 MLTPL
TurboClean® Bev 8340-NF-CA-O[2] 8.3" x 40" CLD 23 MLTPL

[1] The 4040 models are certified for a minimum flow of 250 gallons per day. The 8040 models
    are certified for a minimum flow of 1100 gallons per day. The 8540 models are certified
    for a minimum flow of 1300 gallons per day. Product requires a 1 hour conditioning flush
    with potable water prior to use.
[2] Certified for a minimum daily flow of 2,800 gallons per day.



 
Martin (Shanghai) Water Technologies Co., Ltd. 
No.502 Mingnan Road, Songjiang District
Shanghai, China 
China 
86 152 0177 6057


Facility : # 1 China

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Components, POE: Tanks, Water Softener
FRP Pressure Vessel Tank TK Series >= 83.5 gal. CLD 23 MLTPL
FRP Pressure Vessel Tank TK-C Series >= 83.5 gal. CLD 23 MLTPL
FRP Pressure Vessel Tank TK-S Series >= 6.3 L CLD 23 MLTPL



 
Master Meter, Inc. 
101 Regency Parkway
Mansfield, TX 76063 
United States 
800-765-6518 
817-842-8000
Visit this company's website


Facility : Mansfield, TX

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Water Meters [G]
Flexible Axis Meter / FAM 5/8" x 3/4" CLD 23 MLTPL
SM Flexible Axis Meter / FAM 3/4" x 3/4" CLD 23 MLTPL

[1] Meter bodies can be composed of Bialloy or Stainless Steel.
[2] Sizes:
    5/8" x 1/2" Standard
    5/8" x 3/4" Standard
    3/4" x 7 1/2" Short
    3/4" x 9" Standard
    3/4" x 9" x 1" Standard
    1" Standard
    3/4" x 7 1/2" High Capacity
[3] The MS Multijet Water Meter may be supplied with either threaded or flanged connections.
[4] The Certified Octave Stainless Steel Ultrasonic Water Meters include the following sizes
    and end connections:
    
    1.5" x 13" S.St MM Fixed Oval Flanges
    1.5" x 10" S.St MM Fixed Oval Flanges
    1.5" x 12.625" S.St MM NPT
    2" x 10" S.St MM Fixed Oval Flanges
    2" x 15.25" S.St MM Fixed Oval Flanges
    2" x 17" S.St MM Fixed Oval Flanges
    2" x 15.25" S.St MM Fixed Oval NPT
[5] Meter bodies can be composed of Stainless Steel CF8M or coated Cast or Ductile Iron or
    nylon.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



Facility : Mexico City, México

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Water Meters [G]
Flexible Axis Meter / FAM 5/8" x 3/4" CLD 23 MLTPL
SM Flexible Axis Meter / FAM 3/4" x 3/4" CLD 23 MLTPL

[1] Sizes:
    5/8” x ½” Standard
    5/8” x ¾” Standard
    ¾” x 7 ½” Short
    ¾” x 9” Standard
    ¾” x 9” x 1” Standard
    1” Standard
    ¾” x 7 ½” High Capacity
    
    Meter bodies can be composed of C89836.
    
    MP BLMJ Multijet Water Meter ¾” x 7 ½” Short and MP BLMJ Multijet Water Meter ¾” x 9”
    Standard water meters are only manufactured at facility #70132.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



 
MATCO-NORCA LLC 
1944 Route 22
PO Box 27 
Brewster, NY 10509 
United States 
281-657-6283


Facility : Shandong, China

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Valves
Center-Line Butterfly Valve Flanged End B125W 4"-24" D. HOT MLTPL
Center-Line Butterfly Valve MJ End B125M 4"-24" D. HOT MLTPL
Double Eccentric Butterfly Valve Flanged End B125W 14"-96" D. HOT MLTPL
Double Eccentric Butterfly Valve MJ End B125M 14"-96" D. HOT MLTPL



 
Matsui Kiki Industries Co., Ltd. 
242-5 Higashi-Kouzaka
Naghama, Shiga-ken 562-0802 
Japan 
81 749 62 8770
Visit this company's website


Facility : Binh Duong Province, Vietnam

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Fittings[1] [G]
31-4477-00 1" x 3/4" x 3/4" C. HOT BRASS
31-4477-01 1" x 1/2" x 1/2" C. HOT BRASS
31-4477-02 1" x 3/4" x 1/2" C. HOT BRASS
31-4477-03 1" x 1/2" x 3/4" C. HOT BRASS
31-4477-04 3/4" x 3/4" x 3/4" C. HOT BRASS
31-4477-05 3/4" x 1/2" x 1/2" C. HOT BRASS
31-4477-06 3/4" x 3/4" x 1/2" C. HOT BRASS
31-4477-07 3/4" x 1/2" x 3/4" C. HOT BRASS

[1] Certification does not cover any thread adhesives or adapters used with these fittings.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

Flexible Plumbing Connectors
MWP-FF Z-Y-X[2] 3/4" - 1" D. HOT MLTPL

[2] FF - Connection Shape at both ends
    Z  - Connector ends size - 3/4" or 1"
    Y  - Length - 12" - 36"
    X  - Waveform shape
         B - Bellows or S - Spriral (note: the 1" size is only available for bellows shape)



 
MAX-SEAL, INC. 
4815 W 5th St
Lumberton, NC 28358 
United States 
910-738-2866
Visit this company's website


Facility : New Taipei City, Taiwan

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Valves[G]
High Performance butterfly valve - BL631/BL731 2"-36" CLD 23 MLTPL
High Performance butterfly valve - BW631/BW731 2"-36" CLD 23 MLTPL

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



 
McWane Plant & Industrial LLC 
3600 Richard Arrington Jr. Boulevard
Birmingham, AL 35234 
United States 
866-924-8674
Visit this company's website


Facility : Calera, AL

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Valves [G]
Series 1450 Butterfly Valve (BFV) Valves 30" - 60" CLD 23 MLTPL
Series 42 FLG NRS Rotating Disc Gate Valve 14" - 108"[1] CLD 23 MLTPL
Series 4500 Butterfly Valve (BFV) Valves 4"- 24" CLD 23 MLTPL
Series 49 FLG OS&Y Rotating Disc Gate Valve 14" - 108"[1] CLD 23 MLTPL
Series 52 FLG NRS Rotating Disc Gate Valve 14" - 108"[1] CLD 23 MLTPL
Series 525 FLG x MJ NRS Rotating Disc Gate Valve 14" - 108"[1] CLD 23 MLTPL
Series 59 FLG OS&Y Rotating Disc Gate Valve 14" - 108"[1] CLD 23 MLTPL

[1] Certified for equivalent metric sizes.
[2] Certification includes valves with and without outside levers.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



Facility : Exeter, CA

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Valves [G]
Figure 506 Kenflex Check Valve[1] 4" - 24" CLD 23 MLTPL
Figure 508 Kenflex Check Valve[1] 4" - 24" CLD 23 MLTPL
VBG Rectangular Butterfly Valve 24" - 96" CLD 23 MLTPL

[1] Certification for the Figure 506 Kenflex valve and Figure 508 Kenflex valve includes the
    jack screw and position indicator options.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

Valves and Related Fittings[G]
Series 42 FLG NRS Rotating Disc Gate Valve 3" - 48" CLD 23 MLTPL
Series 49 FLG OS&Y Rotating Disc Gate Valve 3" - 48" CLD 23 MLTPL
Series 52 FLG NRS Rotating Disc Gate Valve 3" - 48" CLD 23 MLTPL
Series 525 FLG x MJ NRS Rotating Disc Gate Valve 3" - 48" CLD 23 MLTPL
Series 55 MJ NRS Rotating Disc Gate Valve 3" - 48" CLD 23 MLTPL
Series 59 FLG OS&Y Rotating Disc Gate Valve 3" - 48" CLD 23 MLTPL

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



Facility : Hebei, China

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Valves [G]
Series 4600 Butterfly Valve [2] CLD 23 MLTPL

[1] Certified for use in distribution systems only.
[2] Certified sizes are 4-24 inches and 30-48 inches.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



Facility : Jingmen, Hubei, China

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Valves
Series 42 FLG NRS Rotating Disc Gate Valve 14" - 108"[1] CLD 23 MLTPL
Series 42 FLG NRS Rotating Disc Gate Valve LL[2] [G] 3" - 12"[1] CLD 23 MLTPL
Series 4700 Butterfly Valve[G] 4" - 24" CLD 23 MLTPL
Series 4750 Butterfly Valve[G] 30" - 36" CLD 23 MLTPL
Series 49 FLG OS&Y Rotating Disc Gate Valve[G] 14" - 108"[1] CLD 23 MLTPL
Series 49 FLG OS&Y Rotating Disc Gate Valve LL[2] [G] 3" - 12"[1] CLD 23 MLTPL
Series 52 FLG NRS Rotating Disc Gate Valve[G] 14" - 108"[1] CLD 23 MLTPL
Series 52 FLG NRS Rotating Disc Gate Valve LL[2] [G] 3" - 12"[1] CLD 23 MLTPL
Series 525 FLG x MJ NRS Rotating Disc Gate Valve[G] 14" - 108"[1] CLD 23 MLTPL
Series 525 FLG x MJ NRS Rotating Disc Gate Valve LL[2] [G] 3" - 12"[1] CLD 23 MLTPL
Series 59 FLG OS&Y Rotating Disc Gate Valve[G] 14" - 108"[1] CLD 23 MLTPL
Series 59 FLG OS&Y Rotating Disc Gate Valve LL[2] [G] 3" - 12"[1] CLD 23 MLTPL

[1] Certified for equivalent metric sizes.
[2] Certified for use in distribution systems only.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



Facility : Tianjin, China

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Valves[G]
GST-Concentric Butterfly valve/ BFV-710D 28" - 36" CLD 23 MLTPL
GST-Concentric Butterfly valve/ BFV-714D 14" - 24" CLD 23 MLTPL
GST-Concentric Butterfly valve/ BFV-724D 2" - 12" CLD 23 MLTPL

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



Facility : New Taipei City, Taiwan

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Valves[G]
HPTL High Performance BFV 2" - 36" CLD 23 MLTPL
HPTW High Performance BFV 2" - 36" CLD 23 MLTPL

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



 
Meidensha Corporation 
496-1 Ittangosewari, Nishibiwajima-cho
Kiyosu-shi, Aichi 452 8602 
Japan 
81 52 509 1333
Visit this company's website


Facility : Aichi, Japan

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Ultrafiltration Devices
CH250-1000E01K-5NA [1] CLD 23 MLTPL
CH250-1000E02K-5NA [1] D. HOT MLTPL
CH250-1000E03K-5NA [1] D. HOT MLTPL
CH250-1000TM50-U1SJ-EKFPA0 [1] CLD 23 MLTPL
CH250-1000TM100-U1DJ-ETLWA0 [1] D. HOT MLTPL
CH250-1000TM100-U2DJ-EKFPA0 [1] D. HOT MLTPL
CH250-1000TM100-U2DJ-ETLWA0 [1] D. HOT MLTPL
CH250-1000TM100-U1DJ-EKFPA0 [1] D. HOT MLTPL

[1] Modules are Certified for a minimum daily permeate flow of 2,500 L/day.
    Individual Elements are Certified for a minimum daily permeate flow of 50 L/element/day.



 
Membrane Solutions (Nan Tong) Co., Ltd. / Membrane Solutions Corp. 
Bldg #3, No. 3, Hongxing East Rd
NETDA Nantong, Jiangsu Province 
China 
86 513 8152 3002
Visit this company's website


Facility : Anhui, China

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Filtration Devices/Components
CRPM-X-Y-Z-E[1] [2] [3] [4] [5] [G] NA CLD 23 MLTPL

[1] CRPM-X-Y-Z-E variable key:
        X - Inner Diameter: 82 mm, 86 mm, 102 mm
        Y - Outer Diameter: 152 mm, 165 mm
        Z - Length: 254-2040 mm
        E - EPDM O-ring,
        Micron rating: 0.1-200 µm
[2] CRPM-102-152-Z-E is certified for a minimum daily permeate flow of 24,000 Liter per 10"
    of length.
[3] CRPM-82-152-Z-E, CRPM-86-152-Z-E and CRPM-102-165-Z-E is certified for a minimum daily
    permeate flow of 28,800 Liter per 10" of length.
[4] CRPM-82-165-Z-E is certified for a minimum daily permeate flow of 36,000 Liter per 10"
    of length.
[5] Product requires a pre-service flush at 12 gallons per minute (gpm) for 2.5 hours with
    deionized water. Certification does not include filter housing.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



Facility : Chongqing, China

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Ultrafiltration Devices[1]
Ultrafiltration PVDF module MSFUF1060C 10" x 60" CLD 23 MLTPL
Ultrafiltration PVDF module MSFUF1060CA 10" x 60" CLD 23 MLTPL
Ultrafiltration PVDF module MSFUF1070C 10" x 70" CLD 23 MLTPL
Ultrafiltration PVDF module MSFUF1090C 10" x 90" CLD 23 MLTPL
Ultrafiltration PVDF module MSFUF8040C 8" x 40" CLD 23 MLTPL
Ultrafiltration PVDF module MSFUF8060C 8" x 60" CLD 23 MLTPL
Ultrafiltration PVDF module MSFUF9070C 9" x 70" CLD 23 MLTPL
Ultrafiltration PVDF module MSFUF9090C 9" x 90" CLD 23 MLTPL
Ultrafiltration PVDF module MSFUFG7080 7" x 80" CLD 23 MLTPL

[1] Ultrafiltration PVDF module MSFUF1070C is flushed for 116 minutes with tap water at a
    rate of 7 gpm.
    Ultrafiltration PVDF module MSFUF1090C is flushed for 150 minutes with tap water at a
    rate of 7 gpm.
    Ultrafiltration PVDF module MSFUF9070C is flushed for 104 minutes with tap water at a
    rate of 7 gpm.
    Ultrafiltration PVDF module MSFUF9090C is flushed for 133 minutes with tap water at a
    rate of 7 gpm.
    Ultrafiltration PVDF module MSFUFG7080 is flushed for 65 minutes with tap water at a
    rate of 7 gpm.
    Ultrafiltration PVDF module MSFUF1070C is flushed for 116 minutes with tap water at a
    rate of 7 gpm.
    Ultrafiltration PVDF module MSFUF1090C is flushed for 150 minutes with tap water at a
    rate of 7 gpm.
    Ultrafiltration PVDF module MSFUF9070C is flushed for 104 minutes with tap water at a
    rate of 7 gpm.
    Ultrafiltration PVDF module MSFUF9090C is flushed for 133 minutes with tap water at a
    rate of 7 gpm.
    Ultrafiltration PVDF module MSFUFG7080 is flushed for 65 minutes with tap water at a
    rate of 7 gpm.
    
    Ultrafiltration PVDF module MSFUF1070C is certified for a minimum daily flow of 42,000
    liters.
    Ultrafiltration PVDF module MSFUF1090C is certified for a minimum daily flow of 54,000
    liters.
    Ultrafiltration PVDF module MSFUF9070C is certified for a minimum daily flow of 37,800
    liters.
    Ultrafiltration PVDF module MSFUF9090C is certified for a minimum daily flow of 48,600
    liters.
    Ultrafiltration PVDF module MSFUFG7080 is certified for a minimum daily flow of 11,000
    Ultrafiltration PVDF module MSFUF1070C is certified for a minimum daily flow of 42,000
    liters.
    Ultrafiltration PVDF module MSFUF1090C is certified for a minimum daily flow of 54,000
    liters.
    Ultrafiltration PVDF module MSFUF9070C is certified for a minimum daily flow of 37,800
    liters.
    Ultrafiltration PVDF module MSFUF9090C is certified for a minimum daily flow of 48,600
    liters.
    Ultrafiltration PVDF module MSFUFG7080 is certified for a minimum daily flow of 11,000
    liters.



Facility : Jiangsu, China

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Filtration Devices/Components
FBPO-X-P-Z-P-Y-W[1] [2] [3] [G] [4] CLD 23 MLTPL

[1] FBPO-X-P-Z-P-Y-W is Certified for a minimum daily flow of 144,000 Liters per day.
[2] FBPO-X-P-Z-P-Y-W where: 
    FBPO: fixed code 
    X:Filter cloth precision: 0.2-1000µm; 
    P: Without an outer filter cloth; fixed code 
    Z : size :01~05; 01:f180×430;02:f180×810;03:f105×230;04:f105×380;05:f150×560; 
    P: PP ring, fixed code 
    Y:Ring Shape (Plastic Ring):Blank=Ectropion; V=Entropion 
    W:Bottom Shape:Blank=Arc-shaped; U=U shaped; C=V shaped
[3] FBPO-X-P-Z-P-Y-W requires a pre-service flush at a flow rate of 12 gallons per minute
    (gpm) for 2.5 hours with deionized water.
[4] Size :01~05; 01:f180×430;02:f180×810;03:f105×230;04:f105×380;05:f150×560
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



 
Membrane Solutions (Nan Tong) Co., Ltd. /Membrane Solutions Corp. 
No. 3, Hongxing East Road
NETDA, Nantong 
Jiangsu 226010 
China 
86 186 6528 4572
Visit this company's website


Facility : # 1 China

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Filtration Devices/Components[1] [2]
BWRO-MS4040 4" x 40" CLD 23 MLTPL
BWRO-MS4040-Z[3] 4" x 40" CLD 23 MLTPL
BWRO-MS4040FR 4" x 40" CLD 23 MLTPL
BWRO-MS4040FR-Z[3] 4" x 40" CLD 23 MLTPL
BWRO-MS4040XFR 4" x 40" CLD 23 MLTPL
BWRO-MS4040XFR-Z[3] 4" x 40" CLD 23 MLTPL
BWRO-MS8040 8" x 40" CLD 23 MLTPL
BWRO-MS8040-FR 8" x 40" CLD 23 MLTPL
BWRO-MS8040-Y[4] 8" x 40" CLD 23 MLTPL
BWRO-MS8040-Y-Z[3] [4] 8" x 40" CLD 23 MLTPL
BWRO-MS8040-YFR[4] 8" x 40" CLD 23 MLTPL
BWRO-MS8040-YFR-Z[3] [4] 8" x 40" CLD 23 MLTPL
FRRO-MS4040 4" x 40" CLD 23 MLTPL
FRRO-MS4040-Z[3] 4" x 40" CLD 23 MLTPL
FRRO-MS8040 8" x 40" CLD 23 MLTPL
FRRO-MS8040-Y[4] 8" x 40" CLD 23 MLTPL
FRRO-MS8040-Y-Z[3] [4] 8" x 40" CLD 23 MLTPL
LPRO-MS2540 2.5" x 40" CLD 23 MLTPL
LPRO-MS2540-Z[3] 2.5" x 40" CLD 23 MLTPL
LPRO-MS4021 4" x 21" CLD 23 MLTPL
LPRO-MS4021-HF 4" x 21" CLD 23 MLTPL
LPRO-MS4021-HF-Z[3] 4" x 21" CLD 23 MLTPL
LPRO-MS4021-HR 4" x 21" CLD 23 MLTPL
LPRO-MS4021-HR-Z[3] 4" x 21" CLD 23 MLTPL
LPRO-MS4021-XHF 4" x 21" CLD 23 MLTPL
LPRO-MS4021-XHF-Z[3] 4" x 21" CLD 23 MLTPL
LPRO-MS4021-XHR 4" x 21" CLD 23 MLTPL
LPRO-MS4021-XHR-Z[3] 4" x 21" CLD 23 MLTPL
LPRO-MS4021-Z[3] 4" x 21" CLD 23 MLTPL
LPRO-MS4040 4" x 40" CLD 23 MLTPL
LPRO-MS4040-HF 4" x 40" CLD 23 MLTPL
LPRO-MS4040-HF-Z[3] 4" x 40" CLD 23 MLTPL
LPRO-MS4040-HR 4" x 40" CLD 23 MLTPL
LPRO-MS4040-HR-Z[3] 4" x 40" CLD 23 MLTPL
LPRO-MS4040-XHF 4" x 40" CLD 23 MLTPL
LPRO-MS4040-XHF-Z[3] 4" x 40" CLD 23 MLTPL
LPRO-MS4040-XHR 4" x 40" CLD 23 MLTPL
LPRO-MS4040-XHR-Z[3] 4" x 40" CLD 23 MLTPL
LPRO-MS4040-Z[3] 4" x 40" CLD 23 MLTPL
LPRO-MS8040 8" x 40" CLD 23 MLTPL
LPRO-MS8040-HF 8" x 40" CLD 23 MLTPL
LPRO-MS8040-HF-Z[3] 8" x 40" CLD 23 MLTPL
LPRO-MS8040-HR 8" x 40" CLD 23 MLTPL
LPRO-MS8040-HR-Z[3] 8" x 40" CLD 23 MLTPL
LPRO-MS8040-XHF 8" x 40" CLD 23 MLTPL
LPRO-MS8040-XHF-Z[3] 8" x 40" CLD 23 MLTPL
LPRO-MS8040-XHR 8" x 40" CLD 23 MLTPL
LPRO-MS8040-XHR-Z[3] 8" x 40" CLD 23 MLTPL
LPRO-MS8040-Y[4] 8" x 40" CLD 23 MLTPL
LPRO-MS8040-Y-Z[3] [4] 8" x 40" CLD 23 MLTPL
PLUS-BWRO-MS4040 4" x 40" CLD 23 MLTPL
PLUS-BWRO-MS4040-Z[3] 4" x 40" CLD 23 MLTPL
PLUS-BWRO-MS8040 8" x 40" CLD 23 MLTPL
PLUS-BWRO-MS8040-FR 8" x 40" CLD 23 MLTPL
PLUS-BWRO-MS8040-Y[4] 8" x 40" CLD 23 MLTPL
PLUS-BWRO-MS8040-Y-Z[3] [4] 8" x 40" CLD 23 MLTPL
PLUS-BWRO-MS8040-YFR[4] 8" x 40" CLD 23 MLTPL
PLUS-BWRO-MS8040-YFR-Z[3] [4] 8" x 40" CLD 23 MLTPL
PLUS-FRRO-MS4040 4" x 40" CLD 23 MLTPL
PLUS-FRRO-MS4040-Z[3] 4" x 40" CLD 23 MLTPL
PLUS-MS8040-Y-FR[4] 8" x 40" CLD 23 MLTPL
PLUS-MS8040-Y-FR-Z[3] [4] 8" x 40" CLD 23 MLTPL
PLUS-MS8040-Y-XFR[4] 8" x 40" CLD 23 MLTPL
PLUS-MS8040-Y-XFR-Z[3] [4] 8" x 40" CLD 23 MLTPL
SWRO-MS2514 2.5" x 14" CLD 23 MLTPL
SWRO-MS2514-HRLE 2.5" x 14" CLD 23 MLTPL
SWRO-MS2514-Z[3] 2.5" x 14" CLD 23 MLTPL
SWRO-MS4040 4" x 40" CLD 23 MLTPL
SWRO-MS4040-Z[3] 4" x 40" CLD 23 MLTPL
SWRO-MS8040 8" x 40" CLD 23 MLTPL
SWRO-MS8040-Y[4] 8" x 40" CLD 23 MLTPL
SWRO-MS8040-Y-Z[3] [4] 8" x 40" CLD 23 MLTPL

[1] Products have the following minimum daily flow:
    PLUS-FRRO-MS4040-2200 gallons
    PLUS-FRRO-MS4040-Z-2200 gallons
    BWRO-MS4040XFR-2200 gallons
    BWRO-MS4040XFR-Z-2200 gallons
    BWRO-MS4040FR-2200 gallons
    BWRO-MS4040FR-Z-2200 gallons
    FRRO-MS4040-2200 gallons
    FRRO-MS4040-Z-2200 gallons
    PLUS-MS8040-Y-FR-9600 gallons
    PLUS-MS8040-Y-FR-Z-9600 gallons
    PLUS-MS8040-Y-XFR-9600 gallons
    PLUS-MS8040-Y-XFR-Z-9600 gallons
    PLUS-BWRO-MS8040-FR-9600 gallons
    PLUS-BWRO-MS8040-YFR-9600 gallons
    PLUS-BWRO-MS8040-YFR-Z-9600 gallons
    BWRO-MS8040-FR-9600 gallons
    BWRO-MS8040-YFR-9600 gallons
    BWRO-MS8040-YFR-Z-9600 gallons
    FRRO-MS8040-9600 gallons
    FRRO-MS8040-Y-9600 gallons
    FRRO-MS8040-Y-Z-9600 gallons
    BWRO-MS4040-2400 gallons
    BWRO-MS4040-Z-2400 gallons
    PLUS-BWRO-MS4040-2400 gallons
    PLUS-BWRO-MS4040-Z-2400 gallons
    BWRO-MS8040-9600 gallons
    BWRO-MS8040-Y-9600 gallons
    BWRO-MS8040-Y-Z-9600 gallons
    PLUS-BWRO-MS8040-9600 gallons
    PLUS-BWRO-MS8040-Y-9600 gallons
    PLUS-BWRO-MS8040-Y-Z-9600 gallons
    LPRO-MS2540-750 gallons
    LPRO-MS2540-Z-750 gallons
    LPRO-MS4021-1000 gallons
    LPRO-MS4021-Z-1000 gallons
    LPRO-MS4021-HF-1000 gallons
    LPRO-MS4021-HF-Z-1000 gallons
    LPRO-MS4021-XHF-1000 gallons
    LPRO-MS4021-XHF-Z-1000 gallons
    LPRO-MS4021-HR-850 gallons
    LPRO-MS4021-HR-Z-850 gallons
    LPRO-MS4021-XHR-850 gallons
    LPRO-MS4021-XHR-Z-850 gallons
    LPRO-MS4040-2400 gallons
    LPRO-MS4040-Z-2400 gallons
    LPRO-MS4040-HF-2700 gallons
    LPRO-MS4040-HF-Z-2700 gallons
    LPRO-MS4040-XHF-2700 gallons
    LPRO-MS4040-XHF-Z-2700 gallons
    LPRO-MS4040-HR-1900 gallons
    LPRO-MS4040-HR-Z-1900 gallons
    LPRO-MS4040-XHR-1900 gallons
    LPRO-MS4040-XHR-Z-1900 gallons
    LPRO-MS8040-10000 gallons
    LPRO-MS8040-Y-10000 gallons
    LPRO-MS8040-Y-Z-10000 gallons
    LPRO-MS8040-HF-10000 gallons
    LPRO-MS8040-HF-Z-10000 gallons
    LPRO-MS8040-XHF-10000 gallons
    LPRO-MS8040-XHF-Z-10000 gallons
    LPRO-MS8040-HR-10000 gallons
    LPRO-MS8040-HR-Z-10000 gallons
    LPRO-MS8040-XHR-10000 gallons
    LPRO-MS8040-XHR-Z-10000 gallons
    SWRO-MS2514-130 gallons
    SWRO-MS2514-HRLE-130 gallons
    SWRO-MS2514-Z-130 gallons
    "SWRO-MS4040-
    1600 gallons"
    SWRO-MS4040-Z-1600 gallons
    SWRO-MS8040-7800 gallons
    SWRO-MS8040-Y-7800 gallons
    SWRO-MS8040-Y-Z-7800 gallons
[2] Product requires a 1 hour deionized water flush at various flow rates and pressures
    depending on the model:
    PLUS-FRRO-MS4040 -10.19 gpm at 225 PSI
    PLUS-FRRO-MS4040-Z -10.19 gpm at 225 PSI
    BWRO-MS4040XFR -  10.19 gpm at 225 PSI
    BWRO-MS4040XFR-Z -10.19 gpm at 225 PSI
    BWRO-MS4040FR - 10.19 gpm at 225 PSI
    BWRO-MS4040FR-Z - 10.19 gpm at 225 PSI
    FRRO-MS4040 - 10.19 gpm at 225 PSI
    FRRO-MS4040-Z - 10.19 gpm at 225 PSI
    PLUS-MS8040-Y-FR - 44.44 gpm at 225 PSI
    PLUS-MS8040-Y-FR-Z - 44.44 gpm at 225 PSI
    PLUS-MS8040-Y-XFR - 44.44 gpm at 225 PSI
    PLUS-MS8040-Y-XFR-Z - 44.44 gpm at 225 PSI
    PLUS-BWRO-MS8040-FR - 44.44 gpm at 225 PSI
    PLUS-BWRO-MS8040-YFR - 44.44 gpm at 225 PSI
    PLUS-BWRO-MS8040-YFR-Z - 44.44 gpm at 225 PSI
    BWRO-MS8040-FR - 44.44 gpm at 225 PSI
    BWRO-MS8040-YFR - 44.44 gpm at 225 PSI
    BWRO-MS8040-YFR-Z -  44.44 gpm at 225 PSI
    FRRO-MS8040 - 44.44 gpm at 225 PSI
    FRRO-MS8040-Y - 44.44 gpm at 225 PSI
    FRRO-MS8040-Y-Z -  44.44 gpm at 225 PSI
    BWRO-MS4040 - 11.11 gpm at 225 PSI
    BWRO-MS4040-Z -  11.11 gpm at 225 PSI
    PLUS-BWRO-MS4040 - 11.11 gpm at 225 PSI
    PLUS-BWRO-MS4040-Z - 11.11 gpm at 225 PSI
    BWRO-MS8040 - 44.44 gpm at 225 PSI
    BWRO-MS8040-Y -  44.44 gpm at 225 PSI
    BWRO-MS8040-Y-Z -  44.44 gpm at 225 PSI
    PLUS-BWRO-MS8040 -  44.44 gpm at 225 PSI
    PLUS-BWRO-MS8040-Y - 44.44 gpm at 225 PSI
    PLUS-BWRO-MS8040-Y-Z - 44.44 gpm at 225 PSI
    LPRO-MS2540 - 3.47 gpm at 150 PSI
    LPRO-MS2540-Z -  3.47 gpm at 150 PSI
    LPRO-MS4021 -  8.68 gpm at 150 PSI
    LPRO-MS4021-Z - 8.68 gpm at 150 PSI
    LPRO-MS4021-HF - 8.68 gpm at 150 PSI
    LPRO-MS4021-HF-Z - 8.68 gpm at 150 PSI
    LPRO-MS4021-XHF - 8.68 gpm at 150 PSI
    LPRO-MS4021-XHF-Z -  8.68 gpm at 150 PSI
    LPRO-MS4021-HR -  73.78 gpm at 150 PSI
    LPRO-MS4021-HR-Z - 73.78 gpm at 150 PSI
    LPRO-MS4021-XHR - 73.78 gpm at 150 PSI
    LPRO-MS4021-XHR-Z -  73.78 gpm at 150 PSI
    LPRO-MS4040 - 11.11 gpm at 150 PSI
    LPRO-MS4040-Z - 11.11 gpm at 150 PSI
    LPRO-MS4040-HF - 12.50 gpm at 150 PSI
    LPRO-MS4040-HF-Z - 12.50 gpm at 150 PSI
    LPRO-MS4040-XHF - 12.50 gpm at 150 PSI
    LPRO-MS4040-XHF-Z - 12.50 gpm at 150 PSI
    LPRO-MS4040-HR -8.80 gpm at 150 PSI
    LPRO-MS4040-HR-Z - 8.80 gpm at 150 PSI
    LPRO-MS4040-XHR - 8.80 gpm at 150 PSI
    LPRO-MS4040-XHR-Z - 8.80 gpm at 150 PSI
    LPRO-MS8040 - 56.02 gpm at 150 PSI
    LPRO-MS8040-Y - 56.02 gpm at 150 PSI
    LPRO-MS8040-Y-Z -56.02 gpm at 150 PSI
    LPRO-MS8040-HF -  61.11 gpm at 150 PSI
    LPRO-MS8040-HF-Z - 61.11 gpm at 150 PSI
    LPRO-MS8040-XHF -  61.11 gpm at 150 PSI
    LPRO-MS8040-XHF-Z - 61.11 gpm at 150 PSI
    LPRO-MS8040-HR - 48.61 gpm at 150 PSI
    LPRO-MS8040-HR-Z - 48.61 gpm at 150 PSI
    LPRO-MS8040-XHR - 48.61 gpm at 150 PSI
    LPRO-MS8040-XHR-Z -  48.61 gpm at 150 PSI
    SWRO-MS2514 - 4.51 gpm at 800 PSI
    SWRO-MS2514-HRLE - 4.51 gpm at 800 PSI
    SWRO-MS2514-Z - 4.51 gpm at 800 PSI
    SWRO-MS4040 - 13.89 gpm at 800 PSI
    SWRO-MS4040-Z - 13.89 gpm at 800 PSI
    SWRO-MS8040 - 67.71 gpm at 800 PSI
    SWRO-MS8040-Y - 67.71 gpm at 800 PSI
    SWRO-MS8040-Y-Z - 67.71 gpm at 800 PSI
[3] Z-Level:
    E: Economy
    PRO: Professional
    EX: Extreme
    LD: Low Differential
[4] Y-Membrane area(ft2):
    300:300ft2
    365:365ft2
    400:400ft2
    440:440ft2



 
Memstar (Mianyang) Co., Ltd. / Memstar Pte Ltd. 
No.249 Pioneering Road
Technology, Venture Park 
Mianyang City, Sichuan Province 
China 
86 816 807 2806
Visit this company's website


Facility : Jiangsu, China

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Ultrafiltration Devices [3]
SMM-1015[1] 57 x 4.5 x 104 cm CLD 23 MLTPL
SMM-1015U[1] 57 x 4.5 x 81.5 cm CLD 23 MLTPL
SMM-1520[1] 57 x 4.5 x 104 cm CLD 23 MLTPL
SMM-1520U[1] 57 x 4.5 x 157.5 cm CLD 23 MLTPL
SMM-1522[1] 57 x 4.5 x 104 cm CLD 23 MLTPL
SMM-1522U[1] 57 x 4.5 x 157.5 cm CLD 23 MLTPL
SMM-1535[1] 57 x 4.5 x 104 cm CLD 23 MLTPL
SMM-1535U[1] 57 x 4.5 x 157.5 cm CLD 23 MLTPL
SMM-2030[1] 57 x 4.5 x 204 cm CLD 23 MLTPL
SMM-2045[1] 57 x 4.5 x 204 cm CLD 23 MLTPL
UF-0511E[1] 12 x 120 cm CLD 23 MLTPL
UF-0512ED[1] 12 x 116 cm CLD 23 MLTPL
UF-0518ED[1] 12 x 180 cm CLD 23 MLTPL
UF-0615E[2] 160 mm x 1730 mm CLD 23 MLTPL
UF-0615ED[2] 160 mm x 1730 mm CLD 23 MLTPL
UF-0620E[2] 160 mm x 2200 mm CLD 23 MLTPL
UF-0620ED[2] 160 mm x 2200 mm CLD 23 MLTPL
UF-0717E[1] 18 x 192 cm CLD 23 MLTPL
UF-0915E[1] 22.5 x 182 cm CLD 23 MLTPL
UF-0920E[1] 22.5 x 232 cm CLD 23 MLTPL
UF-1010E[2] 250 mm x 1160 mm CLD 23 MLTPL
UF-1010ED[1] 25 x 119.5 cm CLD 23 MLTPL
UF-1015E[2] 250 mm x 1730 mm CLD 23 MLTPL
UF-1015ED[1] 25 x 173 cm CLD 23 MLTPL
UF-1020E[2] 250 mm x 2230 mm CLD 23 MLTPL
UF-1020ED[1] 25 x 120 cm CLD 23 MLTPL

[1] Certified for the following minimum daily flow rates:		
    SMM-1015 - 1800 L/day		
    SMM-1015U - 1800 L/day		
    SMM-1520 - 2400 L/day		
    SMM-1520U - 2400 L/day		
    SMM-1522 - 2640 L/day		
    SMM-1522U - 2640 L/day		
    SMM-1535 - 4200 L/day		
    SMM-1535U - 4200 L/day		
    SMM-2030 - 3600 L/day		
    SMM-2045 - 5400 L/day		
    UF-0511E - 2280 L/day		
    UF-0512ED - 2160 L/day		
    UF-0518ED - 3600 L/day		
    UF-0717E - 5640 L/day		
    UF-0915E - 6120 L/day		
    UF-0920E - 9240 L/day		
    UF-1010ED - 6400 L/day		
    UF-1015ED - 9360 L/day		
    UF-1020ED - 11520 L/day
[2] Certified for the following minimum daily flow rates:
    UF-0615E - 5040 L/day
    UF-0615ED - 4320 L/day
    UF-0620E - 5760 L/day
    UF-0620ED - 5760 L/day
    UF-1010E - 6400 L/day
    UF-1015E - 9360 L/day
    UF-1020E - 11520 L/day
[3] Only products bearing the NSF Mark on the product, product packaging, and/or
    documentation shipped with the product are Certified.



Facility : Sichuan Province, China

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Ultrafiltration Devices [3]
SMM-1015[1] 57 x 4.5 x 104 cm CLD 23 MLTPL
SMM-1015U[1] 57 x 4.5 x 81.5 cm CLD 23 MLTPL
SMM-1520[1] 57 x 4.5 x 104 cm CLD 23 MLTPL
SMM-1520U[1] 57 x 4.5 x 157.5 cm CLD 23 MLTPL
SMM-1522[1] 57 x 4.5 x 104 cm CLD 23 MLTPL
SMM-1522U[1] 57 x 4.5 x 157.5 cm CLD 23 MLTPL
SMM-1535[1] 57 x 4.5 x 104 cm CLD 23 MLTPL
SMM-1535U[1] 57 x 4.5 x 157.5 cm CLD 23 MLTPL
SMM-2030[1] 57 x 4.5 x 204 cm CLD 23 MLTPL
SMM-2045[1] 57 x 4.5 x 204 cm CLD 23 MLTPL
UF-0511E[1] 12 x 120 cm CLD 23 MLTPL
UF-0512ED[1] 12 x 116 cm CLD 23 MLTPL
UF-0518ED[1] 12 x 180 cm CLD 23 MLTPL
UF-0615E[2] 160 x 1730 mm CLD 23 MLTPL
UF-0615ED[2] 160 x 1730 mm CLD 23 MLTPL
UF-0620E[2] 160 mm x 2200 mm CLD 23 MLTPL
UF-0620ED[2] 160 mm x 2200 mm CLD 23 MLTPL
UF-0717E[1] 18 x 192 cm CLD 23 MLTPL
UF-0915E[1] 22.5 x 182 cm CLD 23 MLTPL
UF-0920E[1] 22.5 x 232 cm CLD 23 MLTPL
UF-1010E[2] 250 x 1160 mm CLD 23 MLTPL
UF-1010ED[1] 25 x 119.5 cm CLD 23 MLTPL
UF-1015E[2] 250 mm x 1730 mm CLD 23 MLTPL
UF-1015ED[1] 25 x 173 cm CLD 23 MLTPL
UF-1020E[2] 250 mm x 2230 mm CLD 23 MLTPL
UF-1020ED[1] 25 x 120 cm CLD 23 MLTPL

[1] Certified for the following minimum daily flow rates:		
    SMM-1015 - 1800 L/day		
    SMM-1015U - 1800 L/day		
    SMM-1520 - 2400 L/day		
    SMM-1520U - 2400 L/day		
    SMM-1522 - 2640 L/day		
    SMM-1522U - 2640 L/day		
    SMM-1535 - 4200 L/day		
    SMM-1535U - 4200 L/day		
    SMM-2030 - 3600 L/day		
    SMM-2045 - 5400 L/day		
    UF-0511E - 2280 L/day		
    UF-0512ED - 2160 L/day		
    UF-0518ED - 3600 L/day		
    UF-0717E - 5640 L/day		
    UF-0915E - 6120 L/day		
    UF-0920E - 9240 L/day		
    UF-1010ED - 6400 L/day		
    UF-1015ED - 9360 L/day		
    UF-1020ED - 11520 L/day
[2] Certified for the following minimum daily flow rates:
    UF-0615E  - 5040 L/day
    UF-0615ED - 4320 L/day
    UF-0620E  - 5760 L/day
    UF-0620ED - 5760 L/day
    UF-1010E  - 6400 L/day
    UF-1015E  - 9360 L/day
    UF-1020E  - 11520 L/day
[3] Only products bearing the NSF Mark on the product, product packaging, and/or
    documentation shipped with the product are Certified.



Facility : Singapore, Singapore

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Ultrafiltration Devices [3]
SMM-1015[1] 57 x 4.5 x 104 cm CLD 23 MLTPL
SMM-1015U[1] 57 x 4.5 x 81.5 cm CLD 23 MLTPL
SMM-1520[1] 57 x 4.5 x 104 cm CLD 23 MLTPL
SMM-1520U[1] 57 x 4.5 x 157.5 cm CLD 23 MLTPL
SMM-1522[1] 57 x 4.5 x 104 cm CLD 23 MLTPL
SMM-1522U[1] 57 x 4.5 x 157.5 cm CLD 23 MLTPL
SMM-1535[1] 57 x 4.5 x 104 cm CLD 23 MLTPL
SMM-1535U[1] 57 x 4.5 x 157.5 cm CLD 23 MLTPL
SMM-2030[1] 57 x 4.5 x 204 cm CLD 23 MLTPL
SMM-2045[1] 57 x 4.5 x 204 cm CLD 23 MLTPL
UF-0511E[1] 12 x 120 cm CLD 23 MLTPL
UF-0512ED[1] 12 x 116 cm CLD 23 MLTPL
UF-0518ED[1] 12 x 180 cm CLD 23 MLTPL
UF-0615E[2] 160 mm x 1730 mm CLD 23 MLTPL
UF-0615ED[2] 160 mm x 1730 mm CLD 23 MLTPL
UF-0620E[2] 160 mm x 2200 mm CLD 23 MLTPL
UF-0620ED[2] 160 mm x 2200 mm CLD 23 MLTPL
UF-0717E[1] 18 x 192 cm CLD 23 MLTPL
UF-0915E[1] 22.5 x 182 cm CLD 23 MLTPL
UF-0920E[1] 22.5 x 232 cm CLD 23 MLTPL
UF-1010E[2] 250 mm x 1160 mm CLD 23 MLTPL
UF-1010ED[1] 25 x 119.5 cm CLD 23 MLTPL
UF-1015E[2] 250 mm x 1730 mm CLD 23 MLTPL
UF-1015ED[1] 25 x 173 cm CLD 23 MLTPL
UF-1020E[2] 250 mm X 2230 mm CLD 23 MLTPL
UF-1020ED[1] 25 x 120 cm CLD 23 MLTPL

[1] Certified for the following minimum daily flow rates:		
    SMM-1015 - 1800 L/day		
    SMM-1015U - 1800 L/day		
    SMM-1520 - 2400 L/day		
    SMM-1520U - 2400 L/day		
    SMM-1522 - 2640 L/day		
    SMM-1522U - 2640 L/day		
    SMM-1535 - 4200 L/day		
    SMM-1535U - 4200 L/day		
    SMM-2030 - 3600 L/day		
    SMM-2045 - 5400 L/day		
    UF-0511E - 2280 L/day		
    UF-0512ED - 2160 L/day		
    UF-0518ED - 3600 L/day		
    UF-0717E - 5640 L/day		
    UF-0915E - 6120 L/day		
    UF-0920E - 9240 L/day		
    UF-1010ED - 6400 L/day		
    UF-1015ED - 9360 L/day		
    UF-1020ED - 11520 L/day
[2] Certified for the following minimum daily flow rates:
    UF-0615E - 5040 L/day
    UF-0615ED - 4320 L/day
    UF-0620E - 5760 L/day
    UF-0620ED - 5760 L/day
    UF-1010E - 6400 L/day
    UF-1015E - 9360 L/day
    UF-1020E - 11520 L/day
[3] Only products bearing the NSF Mark on the product, product packaging, and/or
    documentation shipped with the product are Certified.



 
Metawater Co., Ltd. 
JR Kanda Manseibashi Building
1-25, Kanda-sudacho, Chiyoda-ku 
Tokyo 101-0041 
Japan 
81 3 6853 7345


Facility : Shiga, Japan

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Microfiltration Devices
Metawater Ceramic Membrane Module [1] CLD 23 MLTPL

[1] Certified for 1 element and 12 element modules.  The 1 element module is Certified for a
    minimum flow of 10,000 L/day.  The 12 element module is Certified for a minimum flow of
    120,000 L/day.



 
Meter Technology Werks, LLC 
2315 East 3rd Avenue
Tampa, FL 33605 
United States 
813-334-4728


Facility : # 1 Zhejiang, China

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Miscellaneous Process Devices/Components[G]
3/4" x 2 1/2" FREE LEAD METER COUPLING/GASKET 3/4" x 2 1/2" CLD 23 MLTPL
1" FREE LEAD METER COUPLING/GASKET 1" CLD 23 MLTPL
1 1/2" METER FLANGE 1 1/2" CLD 23 MLTPL
2" METER FLANGE 2" CLD 23 MLTPL

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

Strainer[G]
LF strainer with flange & washer 3" - 6" CLD 23 MLTPL

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



 
Meter Technology Werks, LLC 
602 North 34th Street
Tampa, FL 33605 
United States 
386-589-5803


Facility : FC

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Miscellaneous Process Devices/Components[1] [G]
CPL 07520 LF 20 mm CLD 23 MLTPL
CPL 1.5" LF EXTENSION 1 1/2" CLD 23 MLTPL
CPL Poly 07520 LF 20 mm CLD 23 MLTPL

[1] Certified for use with water meters only.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

Water Meters[G]
SM-15B LF 3/4" CLD 23 MLTPL
SM-15P LF 3/4" CLD 23 MLTPL

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



 
Meurer Research 
16133 West 45th Drive
Golden, CO 80403 
United States 
303-279-8431


Facility : Golden, CO

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Miscellaneous Process Devices/Components
Meurer Research Baffles[3] NA CLD 23 SS
Meurer Research Flocculators [4] CLD 23 MLTPL

[1] Certified for a maximum of 7500 sq. ft. per minimum flow of 0.5 million gallons per day.
[2] Certified for a minimum flow of 60 gallons per minute per module.
[3] Certified for a minimum flow of 89 gallons per minutes per square foot.
[4] Certified for use in a minimum tank size of 8' x 8' x 10' with a minimum daily flow rate
    of 2,016,000 gallons.



 
MFG Water Treatment Products Co. 
55 Fourth Avenue
P.O. Box 458 
Union City, PA 16438-0458 
United States 
814-438-3959
Visit this company's website


Facility : Union City, PA

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Miscellaneous Process Devices/Components[1] [2]
FRP Baffles [3] CLD 23 MLTPL
FRP Density Baffles [3] CLD 23 MLTPL
FRP Flat Sheet [3] CLD 23 MLTPL
FRP Flumes [3] CLD 23 MLTPL
FRP Gates [3] CLD 23 MLTPL
FRP Launder Covers [3] CLD 23 MLTPL
FRP Outlet Troughs [3] CLD 23 MLTPL
FRP Supports [3] CLD 23 MLTPL
FRP Trough Saddles [3] CLD 23 MLTPL
FRP Trough Supports [3] CLD 23 MLTPL
FRP Troughs [3] CLD 23 MLTPL
FRP Washers [3] CLD 23 MLTPL
FRP Weirs [3] CLD 23 MLTPL

[1] Products that contain PVC spreader bars are not Certified.
[2] Only products bearing the NSF Mark on the product, product packaging, and/or
    documentation shipped with the product are Certified.
[3] All sizes.  Certified for use in water treatment plants with a minimum flow rate of
    10,000 L/day.



 
Mian Yang Polymer New Material Co., Ltd. 
Shima Concentrated Industrial Area
Mianyang, Sichuan 
621025 
China 
86 8162285616
Visit this company's website


Facility : Sichuan, China

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Filtration Devices/Components[1]
Purewater Spacer R-16-JZ [2] CLD 23 PET
Purewater Spacer R-18-JZ [3] CLD 23 PET
Purewater Spacer R-20-JZ [4] CLD 23 PET
Purewater Spacer R-22-JZ [5] CLD 23 PET
Purewater Spacer R-23-JZ-MD21 [6] CLD 23 PET
Purewater Spacer R-24-JZ [7] CLD 23 PET
Purewater Spacer R-25-JZ-MD44 [8] CLD 23 PET
Purewater Spacer R-27-JZ [9] CLD 23 PET
Purewater Spacer R-30-JZ [10] CLD 23 PET
Purewater Spacer R-35-JZ [11] CLD 23 PET
Purewater Spacer R-40-JZ [12] CLD 23 PET
Purewater Spacer R-45-JZ [13] CLD 23 PET
Purewater Spacer R-752 [14] CLD 23 PET

[1] Certified for point-of-entry (POE) and municipal applications.
[2] Certified for the following thickness:
    R-16-JZ: 0.16 +/- 0.02 mm
[3] Certified for the following thickness:
    R-18-JZ: 0.18 +/- 0.02 mm
[4] Certified for the following thickness:
    R-20-JZ: 0.20 +/- 0.02 mm
[5] Certified for the following thickness:
    R-22-JZ: 0.22 +/- 0.02 mm
[6] Certified for the following thickness:
    R-23-JZ-MD21: 0.23 +/- 0.02 mm
[7] Certified for the following thickness:
    R-24-JZ: 0.24 +/- 0.02 mm
[8] Certified for the following thickness:
    R-25-JZ-MD44: 0.25 +/- 0.02 mm
[9] Certified for the following thickness:
    R-27-JZ: 0.27 +/- 0.02 mm
[10] Certified for the following thickness:
     R-30-JZ: 0.30 +/- 0.02 mm
[11] Certified for the following thickness:
     R-35-JZ: 0.35 +/- 0.02 mm
[12] Certified for the following thickness:
     R-40-JZ: 0.40 +/- 0.02 mm
[13] Certified for the following thickness:
     R-45-JZ: 0.45 +/- 0.02 mm
[14] Certified for the following thickness:
     R-752-JZ: 0.25 +/- 0.02 mm



 
Midwestern Fabricators, Inc. 
1235 South Pioneer Road
Salt Lake City, UT 84104 
United States 
801-708-7254


Facility : Salt Lake City, UT

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Chemical Storage Tanks[1]
FRP Chemical Storage Tanks 250 - 30,000 gal CLD 23 MLTPL

[1] Certification for use with the following chemicals. These products are evaluated by
    diluting the exposed water treatment chemicals to the typical use level (TUL), as
    defined by NSF/ANSI/CAN Standard 60.
    Aluminum Sulfate (50%)
    Sodium Hydroxide (50%)
    Sodium Hypochlorite (12.5%)

Miscellaneous Process Devices/Components[2]
FRP Launders 8" - 60" CLD 23 MLTPL
FRP Troughs 8" - 60" CLD 23 MLTPL

[2] Certified for use in water treatment plants with a minimum flow rate of 9,000 L/day.



 
Mitsubishi Chemical Corporation 
1-1 Marunouchi 1-chome
Chiyoda-ku, Tokyo 100-8251 
Japan 
81 3 6748 7467
Visit this company's website


Facility : Dalian, China

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Ultrafiltration Devices[1] [2] [3]
STERAPORE 78E0024SA [4] CLD 23 MLTPL
STERAPORE 78E0040SA [4] CLD 23 MLTPL

[1] Certification requested for a minimum flow rate of 9,000 liters per element per day.
[2] This product requires the following flush prior to being placed into service:
    1. Fill membrane tank with running water and wash the element surface with air for 10
    minutes.					2. Completely drain the membrane tank of water.				
    3. Fill the membrane tank with running water again and start up the filtration pump
    (repeat sequence of about 1 minute of filtration and 1 minute of backwash, 5 times
    total).							
    4. Completely drain the membrane tank of water.				
    5. Fill the membrane tank with running water and filtrate at a constant flow
    rate.							
    6. Perform air scrubbing and backwash after a certain time elapses after starting
    filtration.							
    7. The cleaning procedure shall be complete after filtration for 360 minutes in
    total.						- Estimated amount of cleaning water: 100 L/m2 x number of treatment							
    - If element is not used soon afterward, start normal operation after filtering raw
    water again for 3 hours and discharging filtered water.							
    - Treat filtered water as waste fluid until completion of cleaning.
[3] Only products bearing the NSF Mark on the product, product packaging, and/or
    documentation shipped with the product are Certified.
[4] Certified for the following sizes:
    1250 mm x 1300 mm x 30 mm
    1250 mm x 2000 mm x 30 mm



 
MMP Filtration Pvt. Ltd. 
C3-602 Anushruti Tower
Nr Jain Derasar, Sg Road 
Thaltej, Ahmedabad, Gujarat 380059 
Ahmedabad, GJ 380059 
India 
91 79 26858031
Visit this company's website


Facility : Gujarat, India

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Filtration Devices/Components
Lagoon Melt Blown Cartridges - PP[1] [2] CLD 23 PP
Oceanic Melt Blown Cartridges - PP[3] [2] CLD 23 PP
PEORA Melt Blown Cartridges - PP [4] CLD 23 PP

[1] The LAGOON® Melt Blown Cartridge - PP is certified for a minimum flow rate of 1,920
    liters per day per inch of filter for use in industrial water treatment facilities only.
[2] Products are certified with the following ranges of sizes and micron ratings:
    OCEANIC® Melt Blown Cartridge - PP:
    Length: 127 mm to 1778 mm
    Width: 40 mm to 114 mm
    Micron Rating: 0.5 µ to 100 µ
    LAGOON® Melt Blown Cartridge - PP:
    Length: 127 mm to 1778 mm
    Width: 50 mm to 63 mm
    Micron Rating: 1 µ to 100 µ
    OCEANIC® Melt Blown Cartridge - PP and LAGOON® Melt Blown Cartridge - PP require a
    pre-service flush for 1 minute at a minimum of 1.5 kg/cm2 (21 psi).
[3] The OCEANIC® Melt Blown Cartridge - PP is certified for a minimum flow rate of 2,400
    liters per day per inch of filter for use in industrial water treatment facilities only.
[4] PEORA® Melt Blown Cartridge - PP:
    Length: 127 mm to 1778 mm
    Width: 40 mm to 114 mm
    Micron Rating: 0.5 µ to 100 µ



Facility : Gujarat, India

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Filtration Devices/Components
Lagoon Melt Blown Cartridges - PP[1] [2] [3] CLD 23 PP
Oceanic Melt Blown Cartridges - PP[2] [4] [5] CLD 23 PP
PEORA Melt Blown Cartridges - PP [6] CLD 23 PP

[1] The LAGOON® Melt Blown Cartridge - PP is certified for a minimum flow rate of 1,920
    liters per day per inch of filter for use in industrial water treatment facilities only.
[2] OCEANIC® Melt Blown Cartridge - PP and LAGOON® Melt Blown Cartridge - PP require a
    pre-service flush for 1 minute at a minimum of 1.5 kg/cm2 (21 psi).
[3] Products are certified with the following ranges of sizes and micron ratings:
    LAGOON® Melt Blown Cartridge - PP:
    Length: 127 mm to 1778 mm
    Width: 50 mm to 63 mm
    Micron Rating: 1 µ to 100 µ
[4] The OCEANIC® Melt Blown Cartridge - PP is certified for a minimum flow rate of 2,400
    liters per day per inch of filter for use in industrial water treatment facilities only.
[5] Products are certified with the following ranges of sizes and micron ratings:
    OCEANIC® Melt Blown Cartridge - PP:
    Length: 127 mm to 1778 mm
    Width: 40 mm to 114 mm
    Micron Rating: 0.5 µ to 100 µ
[6] PEORA® Melt Blown Cartridge - PP:
    Length: 127 mm to 1778 mm
    Width: 40 mm to 114 mm
    Micron Rating: 0.5 µ to 100 µ



 
Mountain Filtration Systems, Inc. 
500 Tennyson Avenue
Altoona, PA 16602 
United States 
1-800-296-3005 
814-943-4614
Visit this company's website


Facility : Riviera Beach, FL

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Microfiltration Devices
FF 110-M-HT [1] D. HOT MLTPL
FF 110-M-W [1] D. HOT MLTPL
FF 810-M-W [1] D. HOT MLTPL
FFD 810-M-W [1] D. HOT MLTPL

[1] [1] Certified for use in treatment plants or distribution systems with inlet sizes of
    greater than one inch diameter and where
    flow rate exceeds four gallons per minute.  
    M - Micron rating
    HT - High temperature cartridges
    W - Optional shrink wrapping



 
Multi W Systems, Inc. 
2615 Strozier Avenue
El Monte, CA 91733 
United States 
888-668-9345 
626-358-7171


Facility : # 1 USA

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Pumps[1] [G]
JVMS(A)(B)(C)(D)(E)1-(W)(F)(X)(Y)(Z)[2] 1 1/4" x 1 1/4" CLD 23 MLTPL
JVMS(A)(B)(C)(D)(E)10-(W)(F)(X)(Y)(Z)[2] 2" x 2" CLD 23 MLTPL
JVMS(A)(B)(C)(D)(E)15-(W)(F)(X)(Y)(Z)[2] 2" x 2" CLD 23 MLTPL
JVMS(A)(B)(C)(D)(E)20-(W)(F)(X)(Y)(Z)[2] 2" x 2" CLD 23 MLTPL
JVMS(A)(B)(C)(D)(E)3-(W)(F)(X)(Y)(Z)[2] 1 1/4" x 1 1/4" CLD 23 MLTPL
JVMS(A)(B)(C)(D)(E)5-(W)(F)(X)(Y)(Z)[2] 1 1/4" x 1 1/4" CLD 23 MLTPL
JVMS(A)L(B)(C)(D)(E)1-(W)(F)(X)(Y)(Z)[2] 1 1/4" x 1 1/4" CLD 23 MLTPL
JVMS(A)L(B)(C)(D)(E)10-(W)(F)(X)(Y)(Z)[2] 2" x 2" CLD 23 MLTPL
JVMS(A)L(B)(C)(D)(E)15-(W)(F)(X)(Y)(Z)[2] 2" x 2" CLD 23 MLTPL
JVMS(A)L(B)(C)(D)(E)20-(W)(F)(X)(Y)(Z)[2] 2" x 2" CLD 23 MLTPL
JVMS(A)L(B)(C)(D)(E)3-(W)(F)(X)(Y)(Z)[2] 1 1/4" x 1 1/4" CLD 23 MLTPL
JVMS(A)L(B)(C)(D)(E)5-(W)(F)(X)(Y)(Z)[2] 1 1/4" x 1 1/4" CLD 23 MLTPL

[1] Size is expressed as suction x discharge.
[2] A - Motor Bracket Type
    U - NEMA
    I - IEC (pm motor)
    C - IEC (induction motor)
    B - Motor Speed
    None - 2 Pole (300 rpm)
    F - 4 Pole (1800 rpm)
    C - Pump Configuration
    None - Vertical
    H - Horizontal
    D - Working Pressure
    None - Standard
    P - Uprated
    E - IEC Frame Size
    None - Standard frame
    A - Smaller frame
    B - Larger frame
    F - Piping Connection Type
    F - Round Flange
    N - Oval Flange
    L - Loose Round Flange
    V - Victaulic
    C - C
    W - Number of Impellers
    1 - 29
    X - Horsepower of Motor
    0050 - 1/2 hp
    0075 - 3/4 hp
    0100 - 1.0 hp
    0150 - 1.5 hp
    0200 - 2.0 hp
    0300 - 3.0 hp
    0500 - 5.0 hp
    0750 - 7.5 hp
    1000 - 10 hp
    1500 - 15 hp
    2000 - 20 hp
    2500 - 25 hp
    3000 - 30 hp
    4000 - 40 hp
    5000 - 50 hp
    Y - Motor Type
    D - Open Drip Proof (ODP)
    T - Totally Enclosed Fan Cooled (TEFC)
    Z - Motor Phase
    1 - Single Phase
    3 - Three Phase
    "A" in the model name indicates sub-component design modifications.
    Only the type "S" mechanical seal (Silicon Carbide/Carbon/FPM) is included in
    Certification.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



 
N-Tech Environment Protection Science and Technology (Changzhou) Co., Ltd. 
No. 200, Fenglin South Road
Wujin National Hi-Tech Ind. Dev. Zone 
Changzhou, Jiangsu 213166 
China 
86 519 8528 9755
Visit this company's website


Facility : Jiangsu, China

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Reverse Osmosis Element[1] [2] [3] [Pb]
BW-FR 365-34 8.0 x 40" CLD 23 MLTPL
BW-FR 400-34 8.0 x 40" CLD 23 MLTPL
BW-FR 400-LD 8.0 x 40" CLD 23 MLTPL
BW-FR 4040 4.0 x 40" CLD 23 MLTPL
BW-XFR 400-34 8.0 x 40" CLD 23 MLTPL
BW-XFR 400-LD 8.0 x 40" CLD 23 MLTPL
LE-FR 400-34 8.0 x 40" CLD 23 MLTPL
LE-FR 400-LD 8.0 x 40" CLD 23 MLTPL
LE-XFR 400-34 8.0 x 40" CLD 23 MLTPL
LG BW 400 AFR C 8.0 x 40" CLD 23 MLTPL
LG CW 4040 SF 4.0 x 40" CLD 23 MLTPL

[1] Trade names BW-365-34 and BW-FR 365-34 is certified for a minimum daily permeate
    generation of 10500 gallons for use in public water treatment
    facilities.
    Trade names BW 400, BW 400-34, BW-FR 400-34, BW-FR 400-LD, BW-HR 400, BW-XHR 400, LE
    400, LE-FR 400-34, LE-HR 400, LE-XFR 400-
    34, LE-FR 400-LD, and LE-XHR 400 is certified for a minimum daily permeate generation of
    11000 gallons for use in public water treatment facilities.
    Trade names BW-XFR 400-34, BW-XFR 400-LD, and LG BW 400 AFR C is certified for a minimum
    daily permeate generation of 11500 gallons for
    use in public water treatment facilities.
    Trade names XLP 400-34 and XLP 400-LD is certified for a minimum daily permeate
    generation of 13200 gallons for use in public water treatment
    facilities.
    Trade names BW-HR 440, BW-XHR 440, LE 440, LE-HR 440, and LE-XHR 440 is certified for a
    minimum daily permeate generation of 12500
    gallons for use in public water treatment facilities.
    Trade names LG BW 4040 R and LG BW 4040 ES is certified for a minimum daily permeate
    generation of 2500 gallons for use in public water
    treatment facilities.
    Trade name SW-XLE 400 is certified for a minimum daily permeate generation of 9000
    gallons for use in public water treatment facilities.
    Trade name SW-HRLE 400 is certified for a minimum daily permeate generation of 7500
    gallons for use in public water treatment facilities.
    Trade name SW-HR 400 is certified for a minimum daily permeate generation of 7000
    gallons for use in public water treatment facilities.
    Trade name BW 440 is certified for a minimum daily permeate generation of 12650 gallons
    for use in public water treatment facilities.
    Trade name XLP 440 is certified for a minimum daily permeate generation of 14500 gallons
    for use in public water treatment facilities.
    Trade name SW-XLE 440 is certified for a minimum daily permeate generation of 9900
    gallons for use in public water treatment facilities.
    Trade name SW-HRLE 440 is certified for a minimum daily permeate generation of 8000
    gallons for use in public water treatment facilities.
    Trade name SW-HR 440 is certified for a minimum daily permeate generation of 7700
    gallons for use in public water treatment facilities.
    Trade name BW-4040 is certified for a minimum daily permeate generation of 2700 gallons
    for use in public water treatment facilities.
    Trade name BW-4040-34 is certified for a minimum daily permeate generation of 2300
    gallons for use in public water treatment facilities
[2] Trade name LE-4040 is certified for a minimum daily permeate generation of 2500 gallons
    for use in public water treatment facilities.
    Trade name XLP-4040 is certified for a minimum daily permeate generation of 3100 gallons
    for use in public water treatment facilities.
    Trade name BW-FR 4040 is certified for a minimum daily permeate generation of 2300
    gallons for use in public water treatment facilities.
    Trade name SW-XLE 4040 is certified for a minimum daily permeate generation of 2100
    gallons for use in public water treatment facilities.
    Trade name SW-4040 is certified for a minimum daily permeate generation of 1800 gallons
    for use in public water treatment facilities.
    Trade name LG BW 4040 UES is certified for a minimum daily permeate generation of 2700
    gallons for use in public water treatment facilities.
    Trade name LG SW 4040 R is certified for a minimum daily permeate generation of 1950
    gallons for use in public water treatment facilities.
    Trade name LG CW 4040 SF is certified for a minimum daily permeate generation of 2900
    gallons for use in public water treatment facilities.
    Trade names LG BW 4021 R, LG BW 4021 ES, and LG BW 4021 UES is certified for a minimum
    daily permeate generation of 1000 gallons for use in
    public water treatment facilities.
    Trade Names BW-365-34 and BW-FR 365-34 requires a pre-service flush at 21.88 gallons per
    minute (gpm) for 4 hours with deionized water.
    Trade Names BW 400, BW 400-34, BW-FR 400-34, BW-FR 400-LD, BW-HR 400, BW-XHR 400, LE
    400, LE-FR 400-34, LE-HR 400, LE-XFR 400-
    34, LE-FR 400-LD, and LE-XHR 400 requires a pre-service flush at 22.92 gallons per
    minute (gpm) for 4 hours with deionized water.
    Trade Names BW-XFR 400-34, BW-XFR 400-LD, and LG BW 400 AFR C requires a pre-service
    flush at 23.96 gallons per minute (gpm) for 4 hours
    with deionized water.
    Trade Names XLP 400-34 and XLP 400-LD requires a pre-service flush at 27.5 gallons per
    minute (gpm) for 4 hours with deionized water.
    Trade Names BW-HR 440, BW-XHR 440, LE 440, LE-HR 440, and LE-XHR 440 requires a
    pre-service flush at 26.04 gallons per minute (gpm) for 4
    hours with deionized water.
    Trade Names LG BW 4040 R and LG BW 4040 ES requires a pre-service flush at 5.21 gallons
    per minute (gpm) for 4 hours with deionized water.
    Trade Names LG BW 4021 R, LG BW 4021 ES, and LG BW 4021 UES requires a pre-service flush
    at 2.08 gallons per minute (gpm) for 4 hours with
    deionized water.
    Trade Name SW-XLE 400 requires a pre-service flush at 18.75 gallons per minute (gpm) for
    4 hours with deionized water.
[3] Trade Name SW-HRLE 400 requires a pre-service flush at 15.63 gallons per minute (gpm)
    for 4 hours with deionized water.
    Trade Name SW-HR 400 requires a pre-service flush at 14.58 gallons per minute (gpm) for
    4 hours with deionized water.
    Trade Name BW 440 requires a pre-service flush at 26.35 gallons per minute (gpm) for 4
    hours with deionized water.
    Trade Name XLP 440 requires a pre-service flush at 30.21 gallons per minute (gpm) for 4
    hours with deionized water.
    Trade Name SW-XLE 440 requires a pre-service flush at 20.63 gallons per minute (gpm) for
    4 hours with deionized water.
    Trade Name SW-HRLE 440 requires a pre-service flush at 16.67 gallons per minute (gpm)
    for 4 hours with deionized water.
    Trade Name SW-HR 440 requires a pre-service flush at 16.04 gallons per minute (gpm) for
    4 hours with deionized water.
    Trade Name BW-4040 requires a pre-service flush at 5.63 gallons per minute (gpm) for 4
    hours with deionized water.
    Trade Name BW-4040-34 requires a pre-service flush at 4.79 gallons per minute (gpm) for
    4 hours with deionized water.
    Trade Name LE-4040 requires a pre-service flush at 5.21 gallons per minute (gpm) for 4
    hours with deionized water.
    Trade Name XLP-4040 requires a pre-service flush at 6.46 gallons per minute (gpm) for 4
    hours with deionized water.
    Trade Name BW-FR 4040 requires a pre-service flush at 4.79 gallons per minute (gpm) for
    4 hours with deionized water.
    Trade Name SW-XLE 4040 requires a pre-service flush at 4.38 gallons per minute (gpm) for
    4 hours with deionized water.
    Trade Name SW-4040 requires a pre-service flush at 3.75 gallons per minute (gpm) for 4
    hours with deionized water.
    Trade Name LG BW 4040 UES requires a pre-service flush at 5.63 gallons per minute (gpm)
    for 4 hours with deionized water.
    Trade Name LG SW 4040 R requires a pre-service flush at 4.06 gallons per minute (gpm)
    for 4 hours with deionized water.
    Trade Name LG CW 4040 SF requires a pre-service flush at 6.04 gallons per minute (gpm)
    for 4 hours with deionized water.
[Pb] Product also evaluated and determined to possess weighted average lead content of
     <=0.25% and complies with lead content requirements for “lead free” plumbing as defined
     by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking
     Water Act.

Reverse Osmosis Element: Point of Entry [Pb]
BW-2521[4] 2.5 x 21" CLD 23 MLTPL
BW-2540[4] 2.5 x 40" CLD 23 MLTPL
BW-4021[4] 4.0 x 21" CLD 23 MLTPL
LE-2521[4] 2.5 x 21" CLD 23 MLTPL
LE-2540[4] 2.5 x 40" CLD 23 MLTPL
LE-4021[4] 4.0 x 21" CLD 23 MLTPL
LG BW 2521 ES[5] 2.5 x 21" CLD 23 MLTPL
LG BW 2521 R [5] 2.5 x 21" CLD 23 MLTPL
LG BW 2521 UES[5] 2.5 x 21" CLD 23 MLTPL
LG BW 2540 ES[5] 2.5 x 40" CLD 23 MLTPL
LG BW 2540 R[5] 2.5 x 40" CLD 23 MLTPL
LG BW 2540 UES[5] 2.5 x 40" CLD 23 MLTPL
SW-2521[5] 2.5 x 21" CLD 23 MLTPL
SW-2540[5] 2.5 x 40" CLD 23 MLTPL
SW-4021[4] 4.0 x 21" CLD 23 MLTPL
XLP-2521[4] 2.5 x 21" CLD 23 MLTPL
XLP-2540[4] 2.5 x 40" CLD 23 MLTPL
XLP-4021[4] 4.0 x 21" CLD 23 MLTPL

[4] Trade Names BW-4021, XLP-2540 and LE-4021 requires a pre-service flush at 2.08 gallons
    per minute (gpm) for 4 hours with deionized water.
    Trade Name XLP-4021 requires a pre-service flush at 2.5 gallons per minute (gpm) for 4
    hours with deionized water.
    Trade Names BW-2540 and LE-2540 requires a pre-service flush at 1.88 gallons per minute
    (gpm) for 4 hours with deionized water.
    Trade Names BW-2521, LE-2521, and XLP-2521 requires a pre-service flush at 0.72 gallons
    per minute (gpm) for 4 hours with deionized water.
    Trade Name SW-4021 requires a pre-service flush at 1.46 gallons per minute (gpm) for 4
    hours with deionized water.
    Certified for POE end use.
[5] Trade Name SW-2540 requires a pre-service flush at 1.04 gallons per minute (gpm) for 4
    hours with deionized water.
    Trade Name SW-2521 requires a pre-service flush at 0.63 gallons per minute (gpm) for 4
    hours with deionized water.
    Trade Names LG BW 2540 R and LG BW 2540 ES requires a pre-service flush at 1.56 gallons
    per minute (gpm) for 4 hours with deionized water.
    Trade Name LG BW 2540 UES requires a pre-service flush at 1.67 gallons per minute (gpm)
    for 4 hours with deionized water.
    Trade Names LG BW 2521 R, LG BW 2521 ES, and LG BW 2521 UES requires a pre-service flush
    at 0.72 gallons per minute (gpm) for 4 hours with
    deionized water.
    Certified for POE end use.
[Pb] Product also evaluated and determined to possess weighted average lead content of
     <=0.25% and complies with lead content requirements for “lead free” plumbing as defined
     by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking
     Water Act.



 
N.D.S., Inc. 
851 North Harvard
Lindsay, CA 93247 
United States 
800-992-9949 
559-562-9888
Visit this company's website


Facility : Lindsay, CA

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Service Saddles[G]
Saddles for Polypipe 1 1/2" - 8" CLD 23 MLTPL

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

Tapping Tee[G]
Flo-Tap Hot/Wet Taps for PVC Pipe 1 1/2" - 8" CLD 23 MLTPL

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



 
Nanjing Jiuying Membrane Technologies Co., Ltd. 
No. 1, Yuansi Road, Jiangpu Street
Nanjing, Jiangsu 211800 
China 
86 255 853 6991
Visit this company's website


Facility : Anhui, China

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Ultrafiltration Devices
UPORE™ F25-0440[1] [2] 9 cm x 112 cm CLD 23 MLTPL
UPORE™ F25-0660[3] [4] 16 cm x 177.5 cm CLD 23 MLTPL
UPORE™ F25-0860-A[5] [6] 22.5 cm x 173 cm CLD 23 MLTPL
UPORE™ F25-0860-B[5] [6] 22.5 cm x 186 cm CLD 23 MLTPL
UPORE™ F25-0880-A[7] [8] 22.5 cm x 223 cm CLD 23 MLTPL
UPORE™ F25-0880-B[7] [8] 22.5 cm x 236 cm CLD 23 MLTPL

[1] Certified for minimum flow rate of 6,144 liters per day.
[2] Must be flushed with tap water at 8 liters per minute for 1 hour.
[3] Certified for minimum flow rate of 29,040 liters per day.
[4] Must be flushed with tap water at 33 liters per minute for 1 hour.
[5] Certified for minimum flow rate of 40,480 liters per day.
[6] Must be flushed with tap water at 50 liters per minute for 1 hour.
[7] Certified for minimum flow rate of 58,960 liters per day.
[8] Must be flushed with tap water at 75 liters per minute for 1 hour.



 
NanoH2O Co., Ltd. 
39, Baekbong-ro, Heungdeok-gu
Cheongju-si, Chungbuk, 28441 
Republic of Korea 
82 43 261 7532
Visit this company's website


Facility : Chungbuk, Republic of Korea

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Filtration Devices/Components
BW AFR[G] [1] CLD 23 OTHER
BW ES[G] [1] CLD 23 OTHER
BW MOST[G] [1] CLD 23 OTHER
BW R[G] [1] CLD 23 OTHER
BW UES[G] [1] CLD 23 OTHER
LG BW AFR[G] [1] CLD 23 OTHER
LG BW ES[G] [1] CLD 23 OTHER
LG BW MOST[G] [1] CLD 23 OTHER
LG BW R[G] [1] CLD 23 OTHER
LG BW UES[G] [1] CLD 23 OTHER
LG SW ES[G] [2] CLD 23 OTHER
LG SW GR[3] [G] [4] CLD 23 OTHER
LG SW R[3] [G] [4] CLD 23 OTHER
LG SW SR[3] [G] [4] CLD 23 OTHER
LGTWFS-80[G] [1] CLD 23 OTHER
NF7 Flatsheet [5] CLD 23 OTHER
SW ES[G] [2] CLD 23 OTHER
SW GR[3] [6] [G] [4] CLD 23 OTHER
SW R[3] [6] [G] [4] CLD 23 OTHER
SW SR[3] [6] [G] [4] CLD 23 OTHER
TWFS-80[G] [1] CLD 23 OTHER

[1] Certified for a maximum wetted surface area of 462.04 ft2 and a minimum daily flow of
    3785 L.
[2] Certified for a maximum wetted surface area of 497.58 ft2 and a minimum daily flow of
    3785 L.
[3] A pre-service flush of 12 gpm for 1 hour using de-ionized water is required.
[4] Certified for a maximum surface area of 480 sq. ft and a minimum daily flow of 3785 L.
[5] Certified for a minimum daily flow of 10,625 gallons per day.
    Flush with DI water at a rate of 12 gallons per minute for 1 hour.
    Certified for a maximum surface area of 462.04 sq.ft.
[6] Certified for a minimum daily permeate flow of 5190 L.
    
    End of the trade name may include customer and inventory management information with
    letters or numbers.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

Reverse Osmosis Element [7] [G]
BW 400 AFR[3] [6] 8" x 40" CLD 23 MLTPL
BW 400 AFR (L)[3] [6] 8" x 40" CLD 23 MLTPL
BW 400 AFR G2[3] [6] 8" x 40" CLD 23 MLTPL
BW 400 AFR+[3] [6] 8" x 40" CLD 23 MLTPL
BW 400 FHG[3] [6] 8" x 40" CLD 23 OTHER
CW 4040 SF[8] [9] [10] 4" x 40" CLD 23 MLTPL
LG BW 400 AFR[3] [6] 8" x 40" CLD 23 MLTPL
LG BW 400 AFR (L)[3] [6] 8" x 40" CLD 23 MLTPL
LG BW 400 AFR G2[3] [6] 8" x 40" CLD 23 MLTPL
LG BW 400 AFR+[3] [6] 8" x 40" CLD 23 MLTPL
LG BW 400 FHG[3] [6] 8" x 40" CLD 23 MLTPL
LG CW 4040 SF[8] [9] [10] 4" x 40" CLD 23 MLTPL
LG NF 400[3] [6] 8" x 40" CLD 23 MLTPL
LG NF9[3] [6] 8" x 40" CLD 23 MLTPL
NF 400[3] [6] 8" x 40" CLD 23 MLTPL
NF7[13] 8" x 40" CLD 23 MLTPL
NF7+[13] 8" x 40" CLD 23 MLTPL
NF9[3] [6] 8" x 40" CLD 23 MLTPL

[3] A pre-service flush of 12 gpm for 1 hour using de-ionized water is required.
[6] Certified for a minimum daily permeate flow of 5190 L.
    
    End of the trade name may include customer and inventory management information with
    letters or numbers.
[7] End of Trade name may include customer and inventory management information with letters
    or numbers.
[8]  Certified for a minimum flow of 7,570 L per day.
[9] Flushing Procedure: All models should receive a pre-service flush to be conducted at a
    flow rate of 6.55 liters per minute for 1 hour using de-ionized water.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.
[10] Certified for municipal treatment facility end use.
[11] Certified for a minimum daily flow of 11,200 gallons.
[12] Product requires a pre-service flush to be conducted at a flow rate of 66 gallons per
     minute for 1 hour using de-ionized water.
[13] NF7 is Certified for a minimum daily permeate generation of 10,625 gallons for use in
     public water treatment facilities. NF7+ is Certified for a minimum daily permeate
     generation of 11,687 gallons for use in public water treatment facilities. NF7 and NF7+
     require a pre-service flush at 12 gallons per minute for 1 hour using deionized water.

[2] Certified for a maximum surface area of 506 sq.ft
NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
      documentation shipped with the product are Certified.


 
NanoH2O Co., Ltd. 
39, Baekbong-ro, Heungdeok-gu
Cheongju-si, Chungbuk, 28441 
Republic of Korea 
82 43 261 7513
Visit this company's website


Facility : # 1 China

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Reverse Osmosis Element[1] [2]
LG BW 4040 AFR 4" x 40" CLD 23 MLTPL
LG CW 4040 SF 4" x 40" CLD 23 MLTPL

[1] LG BW 4040 R, LG BW 4040 ES and LG BW 4040 UES are certified for a minimum flow of 2000
    gallons per day. 
    LG BW 4040 AFR is certified for a minimum flow of 1840 gallons per day.
    LG SW 4021 R is certified for a minimum daily flow of 560 gallons.
    LG BW 4021 R, LG BW 4021 ES, LG BW 4021 UES and LG SW 4021 ES are certified for a
    minimum daily flow of 800 gallons
    LG BW 4021 UES+ is certified for a minimum daily flow of 1120 gallons
    LG SW 4040 R is certified for a minimum daily flow of 1360 gallons
    LG SW 4040 ES is certified for a minimum daily flow of 2000 gallons
    LG BW 4040 UES+, LG CW 4040 SF is certified for a minimum daily flow of 2480 gallons
    Model LG SW 2521 R is certified for a minimum daily flow of 240 gallons.
    Models LG BW 2521 R, LG BW 2521 ES, LG BW 2521 UES and LG SW 2521 ES are certified for a
    minimum daily flow of 320 gallons.
    Model LG BW 2521 UES+ is certified for a minimum daily flow of 440 gallons.
    Model LG SW 2540 R is certified for a minimum daily flow of 480 gallons.
    Models LG BW 2540 R, LG BW 2540 ES, LG BW 2540 UES and LG SW 2540 ES are certified for a
    minimum daily flow of 640 gallons.
    Model LG BW 2540 UES+ is certified for a minimum daily flow of 880 gallons.
[2] Product requires flushing with deionized water at 2.628 liters per minute for 1 hour
    prior to use.



 
NanoH2O Co., Ltd. 
39, Baekbong-ro, Heungdeok-gu
Cheongju-si, Chungbuk, 28441 
Republic of Korea 
043-261-7452
Visit this company's website


Facility : # 1 China

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Ultrafiltration Devices
P0615-D[1] 160 mm x 1730 mm CLD 23 MLTPL
P0615-S[1] 160 mm x 1730 mm CLD 23 MLTPL
P0620-D[1] 160 mm x 2200 mm CLD 23 MLTPL
P0620-S[1] 160 mm x 2200 mm CLD 23 MLTPL
P0717-S[2] 18 x 192 cm CLD 23 MLTPL
P0717-S-N[3] 18 x 192 cm CLD 23 MLTPL
P0915-S[2] 22.5 x 182 cm CLD 23 MLTPL
P0915-S-N[3] 22.5 x 182 cm CLD 23 MLTPL
P0920-S[2] 22.5 x 232 cm CLD 23 MLTPL
P0920-S-N[3] 18 x 192 cm CLD 23 MLTPL
P1010-S[1] 250 mm x 1160 mm CLD 23 MLTPL
P1015-S[1] 250 mm x 1730 mm CLD 23 MLTPL
P1020-S[1] 250 mm x 2230 mm CLD 23 MLTPL
S1015[3] 57 x 4.5 x 104 cm CLD 23 MLTPL
S1522[3] 57 x 4.5 x 104 cm CLD 23 MLTPL
S2030[3] 57 x 4.5 x 204 cm CLD 23 MLTPL

[1] Certified for the following minimum daily flow rates:		
    P0615-S- 5040 L/day		
    P0615-D - 4320 L/day		
    P0620-S - 5760 L/day		
    P0620-D - 5760 L/day		
    P1010-S- 6400 L/day		
    P1015-S - 9360 L/day		
    P1020-S - 11520 L/day
[2] Certified for the following minimum daily flow rates:               		
    P0717-S - 5640 L/day               		
    P0915-S - 6120 L/day               		
    P0920-S- 9240 L/day
[3] Certified for the following minimum daily flow rates:               		
    S1015- 1800 L/day               		
    S1522 - 2640 L/day               		
    S2030 - 3600 L/day               		
    P0717-S-N - 5640 L/day               		
    P0915-S-N - 6120 L/day               		
    P0920-S-N - 9240 L/day



Facility : # 2 China

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Ultrafiltration Devices
P0615-D[1] 160 mm x 1730 mm CLD 23 MLTPL
P0615-S[1] 160 mm x 1730 mm CLD 23 MLTPL
P0620-D[1] 160 mm x 2200 mm CLD 23 MLTPL
P0620-S[1] 160 mm x 2200 mm CLD 23 MLTPL
P0717-S[2] 18 x 192 cm CLD 23 MLTPL
P0717-S-N[3] 18 x 192 cm CLD 23 MLTPL
P0915-S[2] 22.5 x 182 cm CLD 23 MLTPL
P0915-S-N[3] 22.5 x 182 cm CLD 23 MLTPL
P0920-S[2] 22.5 x 232 cm CLD 23 MLTPL
P0920-S-N[3] 22.5 x 232 cm CLD 23 MLTPL
P1010-S[1] 250 mm x 1160 mm CLD 23 MLTPL
P1015-S[1] 250 mm x 1730 mm CLD 23 MLTPL
P1020-S[1] 250 mm x 2230 mm CLD 23 MLTPL
S1015[3] 57 x 4.5 x 104 cm CLD 23 MLTPL
S1522[3] 57 x 4.5 x 104 cm CLD 23 MLTPL
S2030[3] 57 x 4.5 x 204 cm CLD 23 MLTPL

[1] Certified for the following minimum daily flow rates:		
    P0615-S- 5040 L/day		
    P0615-D - 4320 L/day		
    P0620-S - 5760 L/day		
    P0620-D - 5760 L/day		
    P1010-S- 6400 L/day		
    P1015-S - 9360 L/day		
    P1020-S - 11520 L/day
[2] Certified for the following minimum daily flow rates:               		
    P0717-S - 5640 L/day               		
    P0915-S - 6120 L/day               		
    P0920-S- 9240 L/day
[3] Certified for the following minimum daily flow rates:               		
    S1015- 1800 L/day               		
    S1522 - 2640 L/day               		
    S2030 - 3600 L/day               		
    P0717-S-N - 5640 L/day               		
    P0915-S-N - 6120 L/day               		
    P0920-S-N - 9240 L/day



Facility : # 3 Singapore

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Ultrafiltration Devices
P0615-D[1] 160 mm x 1730 mm CLD 23 MLTPL
P0615-S[1] 160 mm x 1730 mm CLD 23 MLTPL
P0620-D[1] 160 mm x 2200 mm CLD 23 MLTPL
P0620-S[1] 160 mm x 2200 mm CLD 23 MLTPL
P0717-S[2] 18 x 192 cm CLD 23 MLTPL
P0717-S-N[3] 18 x 192 cm CLD 23 MLTPL
P0915-S[2] 22.5 x 182 cm CLD 23 MLTPL
P0915-S-N[3] 22.5 x 182 cm CLD 23 MLTPL
P0920-S[2] 22.5 x 232 cm CLD 23 MLTPL
P0920-S-N[3] 22.5 x 232 cm CLD 23 MLTPL
P1010-S[1] 250 mm x 1160 mm CLD 23 MLTPL
P1015-S[1] 250 mm x 1730 mm CLD 23 MLTPL
P1020-S[1] 250 mm x 2230 mm CLD 23 MLTPL
S1015[3] 57 x 4.5 x 104 cm CLD 23 MLTPL
S1522[3] 57 x 4.5 x 104 cm CLD 23 MLTPL
S2030[3] 57 x 4.5 x 204 cm CLD 23 MLTPL

[1] Certified for the following minimum daily flow rates:		
    P0615-S- 5040 L/day		
    P0615-D - 4320 L/day		
    P0620-S - 5760 L/day		
    P0620-D - 5760 L/day		
    P1010-S- 6400 L/day		
    P1015-S - 9360 L/day		
    P1020-S - 11520 L/day
[2] Certified for the following minimum daily flow rates:               		
    P0717-S - 5640 L/day               		
    P0915-S - 6120 L/day               		
    P0920-S- 9240 L/day
[3] Certified for the following minimum daily flow rates:               		
    S1015- 1800 L/day               		
    S1522 - 2640 L/day               		
    S2030 - 3600 L/day               		
    P0717-S-N - 5640 L/day               		
    P0915-S-N - 6120 L/day               		
    P0920-S-N - 9240 L/day



 
NanoH2O Co., Ltd. 
39, Baekbong-ro, Heungdeok-gu
Cheongju-si, Chungbuk 28441 
Republic of Korea 
043-261-7452
Visit this company's website


Facility : # 1 China

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Reverse Osmosis Element[1] [2] [3] [Pb]
BW 400 AFR C 8" x 40" CLD 23 MLTPL
CW 4040 SF 4" x 40" CLD 23 MLTPL

[1] Trade name BW 400 AFR C is certified for a minimum daily permeate generation of 11500
    gallons for use in public water treatment facilities.
    Trade names BW 4040 R and BW 4040 ES are certified for a minimum daily permeate
    generation of 2500 gallons for use in public water treatment facilities.
[2] Trade name BW 4040 UES is certified for a minimum daily permeate generation of 2700
    gallons for use in public water treatment facilities.
    Trade name SW 4040 R is certified for a minimum daily permeate generation of 1950
    gallons for use in public water treatment facilities.
    Trade name CW 4040 SF is certified for a minimum daily permeate generation of 2900
    gallons for use in public water treatment facilities.
    Trade names BW 4021 R, BW 4021 ES, and BW 4021 UES is certified for a minimum daily
    permeate generation of 1000 gallons for use in public water treatment facilities.
    Trade Name BW 400 AFR C requires a pre-service flush at 23.96 gallons per minute (gpm)
    for 4 hours with deionized water.
    Trade Names BW 4040 R and BW 4040 ES requires a pre-service flush at 5.21 gallons per
    minute (gpm) for 4 hours with deionized water.
    Trade Names BW 4021 R, BW 4021 ES, and BW 4021 UES requires a pre-service flush at 2.08
    gallons per minute (gpm) for 4 hours with
    deionized water.
[3] Trade Name BW 4040 UES requires a pre-service flush at 5.63 gallons per minute (gpm) for
    4 hours with deionized water.
    Trade Name SW 4040 R requires a pre-service flush at 4.06 gallons per minute (gpm) for 4
    hours with deionized water.
    Trade Name CW 4040 SF requires a pre-service flush at 6.04 gallons per minute (gpm) for
    4 hours with deionized water.
[Pb] Product also evaluated and determined to possess weighted average lead content of
     <=0.25% and complies with lead content requirements for “lead free” plumbing as defined
     by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking
     Water Act.

Reverse Osmosis Element:Point of Entry[4] [Pb]
BW 2521 ES 2.5" x 21" CLD 23 MLTPL
BW 2521 R 2.5" x 21" CLD 23 MLTPL
BW 2521 UES 2.5" x 21" CLD 23 MLTPL
BW 2540 ES 2.5" x 40" CLD 23 MLTPL
BW 2540 R 2.5" x 40" CLD 23 MLTPL
BW 2540 UES 2.5" x 40" CLD 23 MLTPL

[4] Trade Names BW 2540 R and BW 2540 ES requires a pre-service flush at 1.56 gallons per
    minute (gpm) for 4 hours with deionized water.
    Trade Name BW 2540 UES requires a pre-service flush at 1.67 gallons per minute (gpm) for
    4 hours with deionized water.
    Trade Names BW 2521 R, BW 2521 ES, and BW 2521 UES requires a pre-service flush at 0.72
    gallons per minute (gpm) for 4 hours with deionized water.
    Certified for POE end use.
[Pb] Product also evaluated and determined to possess weighted average lead content of
     <=0.25% and complies with lead content requirements for “lead free” plumbing as defined
     by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking
     Water Act.



 
Nawaplastic Industries Co., Ltd. 
1 Siam Cement Road
Bangsue, Bangkok 10800 
Thailand 
66 2586 2462
Visit this company's website


Facility : Saraburi, Thailand

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Service Saddles
SCG PP-R BRASS FEMALE SADDLE 75-160mm x 32mm x 1" C. HOT MLTPL



 
NCI Canada Inc. 
2305 Wyecroft Road
Oakville, ON L6L 6R2 
Canada 
780-461-6499
Visit this company's website


Facility : Qingdao, China

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Valves [G]
[a][b][c][d]4[e]34[f] Flow+ Resilient Seated Butterfly Valves[1] 2" - 72" CLD 23 MLTPL

[1] [a] Valve size in inches (02-72)
    [b] Style of valve:
        A/B (Wafer)
        C (Lug)
        D (Flange)
    [c] Body material:
        1 (Cast Iron)
        2 (Ductile Iron)
        3 WCB (carbon steel)
        4 CF8M (316 SS)
        B Bronze
    [d] Pressure rating:
        2 (285 PSI max) 
        3 (275 PSI max)
        4 (250 PSI max)
        5 (200 psi max)
        6 (232 psi max)
        7 (150 psi max)
        8 (125 psi max)
    [e] Stem material:
        4 (316 SS)
        5 (17-4 PH)
        1,6 (416 SS)
    [f] Operator:
        3 (lever)
        5 (gear)
        6 (DA actuator)
        7 (FC actuator)
        8 (FO actuator)
        9 (electric)
        C (nut)
        U (chain wheel)
        X (bare stem)
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



 
Neoperl Inc. 
171 Mattatuck Heights
Waterbury, CT 06705-3832 
United States 
203-756-8891
Visit this company's website


Facility : Mullheim, Germany

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Check Valve[G]
31.4441.0 NV40-F-PVB 1 1/2" CLD 23 MLTPL
31.4451.0 NV50-F-PVB 2" CLD 23 MLTPL

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



 
Neptune Benson Inc. 
334 Knight Street
Suite 3100 
Warwick, RI 02886 
United States 
303-425-4242
Visit this company's website


Facility : Holland, MI

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Filtration Devices/Components[1] [G]
LPV-250-(Y)-(Z)[2] 3" - 4" CLD 23 MLTPL
LPV-500-(Y)-(Z)[2] 4" - 6" CLD 23 MLTPL
V-200(X)-(Y)[3] 3" CLD 23 MLTPL
V-250-(Y)-(Z)[4] 3" - 4" CLD 23 MLTPL
V-500-(Y)-(Z)[4] 4" - 6" CLD 23 MLTPL
V-1000-(Y)-(Z)[4] 6" - 8" CLD 23 MLTPL
V-1500-(Y)-(Z)[4] 8" - 10" CLD 23 MLTPL
V-2000-(Y)-(Z)[4] 10" - 14" CLD 23 MLTPL
V-3VERT-(XX)[5] 8" - 14" CLD 23 MLTPL
V-3500-(XX)[5] 8" - 20" CLD 23 MLTPL
V-8000-(XX)[5] 14" - 36" CLD 23 MLTPL

[1] Certified for a minimum daily flow of 190,784 liters.
[2] LPV - Low Pressure V-Series Filter, (Y) Denotes connection size, (Z) Connection type
    (i.e. flange, groove, DIN flange, JIS flange)
[3] (X) Refers to the configuration and may be P or ST
    (Y) Refers to the connection type and may be 3N (3" NPT), 3B (3" BSP), 3G (3" groove) or
    3F (3" Flanged)
[4] (Y) Denotes connection size, (Z) Connection type (i.e. flange, groove, DIN flange, JIS
    flange)
[5] (XX) denotes the connection flange size.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



 
NEWAY Valve (Suzhou) Co., Ltd. 
No.666 Taishan Road, New District
Suzhou, Jiangsu 
215129 
China 
86 512 6690 5627


Facility : Suzhou, Jiangsu, China

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Valves[G]
“T” Concentric Butterfly Valve 2"-24" CLD 23 MLTPL

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



 
NIBCO INC. 
World Headquarters
1516 Middlebury Street 
Elkhart, IN 46516-4740 
United States 
574-295-3000
Visit this company's website


Facility : Reynosa, Tamaulipas, Mexico

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Valves and Related Fittings# [G]
Flange, Cast, 741-LF FNPTxFlange 3/4" - 6" C. HOT BRONZE
Flange, Cast, 771-LF FNPTxFlange 1" - 6" C. HOT BRONZE
Flange, Cast, 775-LF FNPTxFlange 2" - 4" C. HOT BRONZE

# Figure numbers may have one of the following optional prefixes used to identify retail
  packaging requirements: UCP, U, UTP, USP, UPP, UP, UMP, UHP, UBP, PP, MPP, CP, MCP, C,
  CS, MCC, CL or CLC.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

NOTE: NSF has not conducted production control audits at this facility.  Product Listing is
      based on type testing [ISO/IEC Guide 2: 1996(E/F/R) 14.5].


 
Ningbo Aimei Meter Manufacture Co., Ltd. 
No. 68 Town West Road
Shangtian Town, Fenghua 
Zhejiang 315511 
China 
86 574 8863 7838
Visit this company's website


Facility : Zhejiang, China

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Miscellaneous Process Devices/Components[1] [G]
CPL 1.5" LF extension 1.5" CLD 23 MLTPL

[1] Certified for use with water meters only.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

Water Meters[G]
PD 5/8" x 1/2"LF 5/8" x 1/2" CLD 23 MLTPL
PD 5/8" x 3/4" LF 5/8" x 3/4" CLD 23 MLTPL
PDSM-15ALF 3/4" CLD 23 MLTPL
PDSM-15SLF 3/4" CLD 23 MLTPL

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



 
Ningbo RXHL Technology Co., Ltd. 
No. 296, Kaiyuan Road
High-tech Zone 
Cixi 
Ningbo, 33 315312 
China 
86 574 63208887
Visit this company's website


Facility : Zhejiang, China

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Reverse Osmosis Element[1] [2] [3]
BW-4040-FR 4 x 40 in CLD 23 MLTPL
BW-8040-FR 8 x 40 in CLD 23 MLTPL
ULP-4040-FR 4 x 40 in CLD 23 MLTPL
ULP-8040-FR 8 x 40 in CLD 23 MLTPL

[1] ULP = Ultra Low Pressure
    BW = Brackish Water
    TW = Tap Water
    HR = High Resistant
    FR = Fouling Resistant
[2] Products require the following pre-service flush using tap water at a pressure not to
    exceed 50 psi:						
    ULP-4040 requires a pre-service flush at a flow rate of 4 GPM (gallons per minute) for
    24 hours.
    ULP-8040 requires a pre-service flush at a flow rate of 12 GPM (gallons per minute) for
    24 hours.
    ULP-4040-HR requires a pre-service flush at a flow rate of 4 GPM (gallons per minute)
    for 24 hours.
    ULP-8040-HR requires a pre-service flush at a flow rate of 12 GPM (gallons per minute)
    for 24 hours.
    ULP-4040-FR requires a pre-service flush at a flow rate of 4 GPM (gallons per minute)
    for 24 hours.
    ULP-8040-FR requires a pre-service flush at a flow rate of 12 GPM (gallons per minute)
    for 24 hours.
    BW-4040 requires a pre-service flush at a flow rate of 4 GPM (gallons per minute) for 24
    hours.
    BW-8040 requires a pre-service flush at a flow rate of 12 GPM (gallons per minute) for
    24 hours.
    BW-4040-HR requires a pre-service flush at a flow rate of 4 GPM (gallons per minute) for
    24 hours.
    BW-8040-HR requires a pre-service flush at a flow rate of 12 GPM (gallons per minute)
    for 24 hours.
    BW-4040-FR requires a pre-service flush at a flow rate of 4 GPM (gallons per minute) for
    24 hours.
    BW-8040-FR requires a pre-service flush at a flow rate of 12 GPM (gallons per minute)
    for 24 hours.
    TW-4040 requires a pre-service flush at a flow rate of 4 GPM (gallons per minute) for 24
    hours.
    TW-8040 requires a pre-service flush at a flow rate of 12 GPM (gallons per minute) for
    24 hours.
[3] Only products bearing the NSF Mark on the product, product packaging, and/or
    documentation shipped with the product are Certified.



 
Ningbo Water Meter (Group) Co., Ltd. 
No. 355, Hongxing Road
Jiangbei District, Ningbo 315032 
China 
86 574 8819 5871
Visit this company's website


Facility : Ningbo, China

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Water Meters[G]
CLARK MJ-SDC DN50(F) 2" CLD 23 MLTPL
MJ-SDC DN50(F) 2" CLD 23 MLTPL
MJ-SDC-M DN50(F) 2" CLD 23 MLTPL

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



 
Ningbo YinZhou Plumbing Hardware Co., Ltd. 
14-4, No. 37, Baizhang East Road
Yingzhou District, Ningbo 315040 
China 
86 574 6685 7216
Visit this company's website


Facility : Zhejiang, China

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Miscellaneous Process Devices/Components[G]
1 1/2" BRASS METER FLANGE 1 1/2" CLD 23 MLTPL
1" FREE LEAD BRONZE METER COUPLING/GASKET 1" CLD 23 MLTPL
1" Lead Free Brass Locking Expander Meter Coupling 1" CLD 23 MLTPL
2" BRASS METER FLANGE 2" CLD 23 MLTPL
3/4" x 2 1/2" FREE LEAD BRONZE METER COUPLING/GASKET 3/4" x 2 1/2" CLD 23 MLTPL
5/8" Lead Free Brass Locking Expander Meter Coupling 5/8" CLD 23 MLTPL
5/8"x3/4" Lead Free Brass Locking Expander Meter Coupling 5/8"x3/4" CLD 23 MLTPL

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



 
Ningjin APC Industries Incorporated Company 
No. 18 Taishan Road
Ningjin, Shandong 253400 
China 
86 534 707 7826
Visit this company's website


Facility : Shandong, China

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Fire Hydrants[G]
MH-1510 6" CLD 23 MLTPL
MH-1510A 6" CLD 23 MLTPL
MH-1510F 6" CLD 23 MLTPL
MH-1510FA 6" CLD 23 MLTPL
MH-1511 6" CLD 23 MLTPL
MH-1511A 6" CLD 23 MLTPL
MH-1512 6" CLD 23 MLTPL
MH-1512A 6" CLD 23 MLTPL

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

Valves[G]
HFGD-381X 2.5" - 10" CLD 23 MLTPL
HFGD-381X-175 2.5" - 10" CLD 23 MLTPL
HFGD-381X-300 2.5" - 10" CLD 23 MLTPL
HFGD-381Y-175 10" CLD 23 MLTPL
HFGD-381Y-300 10" CLD 23 MLTPL
Z45-FJA 2.5" - 12" CLD 23 MLTPL

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



 
Nupi Industrie Italiane SpA 
Via Stefano Ferrario Z.I. Sud-Ovest
21052 Busto Ariszio (VA) 
Italy 
39 03 313 44211
Visit this company's website


Facility : Busto Arsizio (VA), Italy

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Fittings
Elofit[Y] [12] 1/4" x ½" - 40 x 60 CLD 23 MLTPL
Elofit[1] [2] [3] [4] [5] [Y] 1/4" x ½" - 40 x 60 CLD 23 PE
Niron[6] [7] [Y] 1/2" - 12" C. HOT PP

Miscellaneous Process Devices/Components [G]
NCOLVPR Branch Fitting with Valve BRASS Adapter (Cold Expansion) SDR 11[8] 1-1/4" - 12" C. HOT MLTPL
NCOLVPRCR Branch Fitting with Valve BRASS Adapter (Crimp Ring) SDR 11[9] 1-1/4" - 12" C. HOT MLTPL

[8] Certified for the following configurations:
    40 mm (27NCOLVPR403212) 1-1/4''
    50 mm (27NCOLVPR503212) 1-1/2"
    63 mm (27NCOLVPR633212) 2"
    75 mm (27NCOLVPR753212) 2-1/2"
    90 mm (27NCOLVPR903212) 3"
    110 mm (27NCOLVPR1103212) 3 1/2"
    40 mm (27NCOLVPR403234) 1-1/4"
    50 mm (27NCOLVPR503234) 1-1/2"
    63 mm (27NCOLVPR633234) 2"
    75 mm (27NCOLVPR753234) 2-1/2"
    90 mm (27NCOLVPR903234) 3"
    110 mm (27NCOLVPR1103234) 3 1/2"
    40 mm (27NCOLVPR40321) 1-1/4"
    50 mm (27NCOLVPR50321) 1-1/2"
    63 mm (27NCOLVPR63321) 2"
    75 mm (27NCOLVPR75321) 2-1/2"
    90 mm (27NCOLVPR90321) 3"
    110 mm (27NCOLVPR110321) 3 1/2"
    125 mm (27NCOLVPR1253212) 4"
    160 mm (27NCOLVPR1603212) 6"
    200 mm (27NCOLVPR2003212) 8"
    250 mm (27NCOLVPR2503212) 10"
    315 mm (27NCOLVPR3153212) 12"
    125 mm (27NCOLVPR1253234) 4"
    160 mm (27NCOLVPR1603234) 6"
    200 mm (27NCOLVPR2003234) 8"
    250 mm (27NCOLVPR2503234) 10"
    315 mm (27NCOLVPR3153234) 12"
    125 mm (27NCOLVPR125321) 4"
    160 mm (27NCOLVPR160321) 6"
    200 mm (27NCOLVPR200321) 8"
    250 mm (27NCOLVPR250321) 10"
    315 mm (27NCOLVPR315321) 12"
[9] Certified for the following configurations:
    40 mm (27NCOLVPRCR403212) 1-1/4"
    50 mm (27NCOLVPRCR503212) 1-1/2"
    63 mm (27NCOLVPRCR633212) 2"
    75 mm (27NCOLVPRCR753212) 2-1/2"
    90 mm (27NCOLVPRCR903212) 3"
    110 mm (27NCOLVPRCR1103212) 3 1/2"
    40 mm (27NCOLVPRCR403234) 1-1/4"
    50 mm (27NCOLVPRCR503234) 1-1/2"
    63 mm (27NCOLVPRCR633234) 2"
    75 mm (27NCOLVPRCR753234) 2-1/2"
    90 mm (27NCOLVPRCR903234) 3"
    110 mm (27NCOLVPRCR1103234) 3 1/2"
    40 mm (27NCOLVPRCR40321) 1-1/4"
    50 mm (27NCOLVPRCR50321) 1-1/2"
    63 mm (27NCOLVPRCR63321) 2"
    75 mm (27NCOLVPRCR75321) 2-1/2"
    90 mm (27NCOLVPRCR90321) 3"
    110 mm (27NCOLVPRCR110321) 3 1/2"
    125 mm (27NCOLVPRCR1253212) 4"
    160 mm (27NCOLVPRCR1603212) 6"
    200 mm (27NCOLVPRCR2003212) 8"
    250 mm (27NCOLVPRCR2503212) 10"
    315 mm (27NCOLVPRCR3153212) 12"
    125 mm (27NCOLVPRCR1253234) 4"
    160 mm (27NCOLVPRCR1603234) 6"
    200 mm (27NCOLVPRCR2003234) 8"
    250 mm (27NCOLVPRCR2503234) 10"
    315 mm (27NCOLVPRCR3153234) 12"
    125 mm (27NCOLVPRCR125321) 4"
    160 mm (27NCOLVPRCR160321) 6"
    200 mm (27NCOLVPRCR200321) 8"
    250 mm (27NCOLVPRCR250321) 10"
    315 mm (27NCOLVPRCR315321) 12"
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

Valves[G] [Y]
PE VALVE FOR UNDERGROUND APPLICATION (12EIVSxx)[11] 1" - 6" CLD 23 MLTPL

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.
[Y] Complies with US EPA Maximum Contaminant Levels (MCLs) for PFAS according to
    NSF/ANSI/CAN 61.
[10] Configurations include:		
     		
     PPR True Union Ball Valve PP-RCT Socket Fusion Ends		
     20 mm (27NBVSF020034) (1/2”)
     20 mm (27NBVSF020100) (1/2")
     25 mm (27NBVSF025034) (3/4”)		
     25 mm (27NBVSF025100) (3/4")		
     32 mm (27NBVSF032100) (1")		
     40 mm (27NBVSF040114) (1-1/4")		
     50 mm (27NBVSF050200) (1-1/2")		
     63 mm (27NBVSF063200) (2")
     75 mm (27NBVSF075300) (2-1/2")
     90 mm (27NBVSF090300) (3")
     110 mm (27NBVSF110300) (3-1/2")	
     		
     PPR True Union Ball Valve PP-RCT Spigot Ends - SDR 11		
     25 mm (27NBVLS025034) (3/4”)
     25 mm (27NBVLS025100) (3/4")
     32 mm (27NBVLS032034) (1”)		
     32 mm (27NBVLS032100) (1")		
     40 mm (27NBVLS040100) (1-1/4")		
     50 mm (27NBVLS050114) (1-1/2")
     50 mm (27NBVLS050200) (1 ½”)		
     63 mm (27NBVLS063200) (2")		
     75 mm (27NBVLS075200) (2-1/2")		
     90 mm (27NBVLS090300) (3")
     110 mm (27NBVLS110300) (3-1/2")
     125 mm (27NBVLS125300) (4")
[11] The "xx" indicates the size:
     01  - 1"
     114 - 1 1/4"
     112 - 1 1/2"
     02  - 2"
     212 - 2 1/2"
     03  - 3"
     04  - 4"
     06  - 6"

NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
      documentation shipped with the product are Certified.


 
Oakville Stamping & Bending Limited o/a OS&B Industrial 
13-495 Woodward Avenue
Hamilton, ON L8H 6N6 
Canada 
905-661-0976
Visit this company's website


Facility : Qingdao, China

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Valves[G]
OSB13LEN Lug Butterfly Valve 2" - 24" CLD 23 MLTPL
OSB13LE Lug Butterfly 2" - 24" CLD 23 MLTPL
OSB13WE Wafer Butterfly Valve 2" - 24" CLD 23 MLTPL
OSB2515W Wafer Check Valve 2" - 24" CLD 23 MLTPL
OSB33GE Grooved End Butterfly Valve 2" - 12" CLD 23 MLTPL

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



 
Odis Filtering Ltd. 
8 Martin Gehl
P.O. Box 3137 
Kiryat-Arye, Petah-Tikya 49130 
Israel 
972 3 9258508
Visit this company's website


Facility : Petah-Tikya, Israel

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Filtration Devices/Components[1] [2] [3] [G]
Multimedia Filters 45(XXX)DW [4] CLD 23 MLTPL
Multimedia Filters 45(XXX)DWL [4] CLD 23 MLTPL
Multimedia Filters 45(XXX)G [4] CLD 23 MLTPL
Multimedia Filters 45(XXX)SPA [4] CLD 23 MLTPL

[1] XXX refers to the diameter of the tank body in inches and may be 008, 010, 012, 016,
    020, 024, 030, 036,048, 055,064,072,080,090,100 or 120.
[2] The "DW" tanks are 1400 mm tall, the "DWL" tanks are 2000 mm tall, the "G" tanks are 980
    mm tall, and the "SPA" tanks are 1150 mm tall.
[3] Certified for tanks without media.
[4] Certified for a minimum daily flow of 4,200 Liters.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



 
Ohio Valve Company 
2802 Holmes Road
Houston, TX 77051 
United States 
86 15130101103


Facility : # 1 China

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Valve[G]
Lug Type Butterfly Valve-4832 14" - 24" CLD 23 MLTPL
Lug Type Butterfly Valve-4833 2" - 12" CLD 23 MLTPL

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



 
Ohio Valve Company - OVC 
2330 Holmes Road
Houston, TX 77051 
United States 
888-433-1433


Facility : Gyeongsangnam-Do, Republic of Korea

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Valves[1] [2] [3] [G]
HPSS(A)F(C)(X) 3" - 24" CLD 23 MLTPL

[1] A: 150 or 300
    F (Flange), L (Lug), W (Wafer)
    C: G (gear) or L (lever)
    X: Size in inch (from 3 - 24)
    
[2] Complies with US EPA Maximum Contaminant Levels (MCLs) for PFAS according to
    NSF/ANSI/CAN61.
[3] Certified for stainless steel and PTFE materials only.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



 
Omicron Water Technologies 
2625 Logan Avenue
San Diego, CA 92113 
United States 
844 204 5400 
844 204 5400
Visit this company's website


Facility : Monzon, Spain

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Filtration Devices/Components
Omicron 10600(H) 3" - 14" CLD 23 MLTPL
Omicron 10600(V) 4" - 14" CLD 23 MLTPL
Omicron 13200(H) 3" - 14" CLD 23 MLTPL
Omicron 13200(V) 4" - 14" CLD 23 MLTPL
Omicron 16500(H) 3" - 14" CLD 23 MLTPL
Omicron 16500(V) 4" - 14" CLD 23 MLTPL
Omicron 21300(H) 3 " - 14" CLD 23 MLTPL
Omicron 21300(V) 4" - 14" CLD 23 MLTPL
Omicron 5300(H) 3" - 14" CLD 23 MLTPL
Omicron 5300(H) 3" - 14" CLD 23 MLTPL
Omicron 5300(V) 4" - 14" CLD 23 MLTPL
Omicron 8000(H) 3" - 14" CLD 23 MLTPL
Omicron 8000(V) 4" - 14" CLD 23 MLTPL



 
ONICON Incorporated 
11451 Belcher Road South
Largo, FL 33773 
United States 
727-447-6140
Visit this company's website


Facility : Montagnana (Padova), Italy

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Water Meters
FT-3A01-1011L-BCDE 1" D. HOT MLTPL
FT-3A01-1012L-BCDE 1" D. HOT MLTPL
FT-3A01-1111L-BCDE 1" D. HOT MLTPL
FT-3A01-1112L-BCDE 1" D. HOT MLTPL
FT-3A01-1141L-BCDE 1" D. HOT MLTPL
FT-3A01-1151L-BCDE 1" D. HOT MLTPL
FT-3A01-1151L-BCDE 1" D. HOT MLTPL
FT-3A01-1311L-BCDE 1" D. HOT MLTPL
FT-3A01-2011L-BCDE 1" D. HOT MLTPL
FT-3A01-2111L-BCDE 1" D. HOT MLTPL
FT-3A01-2111L-BCDE 1" D. HOT MLTPL
FT-3A01-2141L-BCDE 1" D. HOT MLTPL
FT-3A02-1011L-BCDE 2" D. HOT MLTPL
FT-3A02-1012L-BCDE 2" D. HOT MLTPL
FT-3A02-1111L-BCDE 2" D. HOT MLTPL
FT-3A02-1112L-BCDE 2" D. HOT MLTPL
FT-3A02-1141L-BCDE 2" D. HOT MLTPL
FT-3A02-1151L-BCDE 2" D. HOT MLTPL
FT-3A02-1311L-BCDE 2" D. HOT MLTPL
FT-3A02-1351L-BCDE 3" D. HOT MLTPL
FT-3A02-1L11L-BCDE 2" D. HOT MLTPL
FT-3A02-2011L-BCDE 2" D. HOT MLTPL
FT-3A02-2111L-BCDE 2" D. HOT MLTPL
FT-3A02-2111L-BCDE 2" D. HOT MLTPL
FT-3A02-2111L-BCDE 2" D. HOT MLTPL
FT-3A02-2111L-BCDE 2" D. HOT MLTPL
FT-3A02-2141L-BCDE 2" D. HOT MLTPL
FT-3A02-2311L-BCDE 2" D. HOT MLTPL
FT-3A03-1011L-BCDE 3" D. HOT MLTPL
FT-3A03-1012L-BCDE 3" D. HOT MLTPL
FT-3A03-1111L-BCDE 3" D. HOT MLTPL
FT-3A03-1111L-BCDE 3" D. HOT MLTPL
FT-3A03-1112L-BCDE 3" D. HOT MLTPL
FT-3A03-1141L-BCDE 3" D. HOT MLTPL
FT-3A03-1151L-BCDE 3" D. HOT MLTPL
FT-3A03-1311L-BCDE 3" D. HOT MLTPL
FT-3A03-2011L-BCDE 3" D. HOT MLTPL
FT-3A03-2111L-BCDE 3" D. HOT MLTPL
FT-3A04-1011L-BCDE 4" D. HOT MLTPL
FT-3A04-1012L-BCDE 4" D. HOT MLTPL
FT-3A04-1111L-BCDE 4" D. HOT MLTPL
FT-3A04-1141L-BCDE 4" D. HOT MLTPL
FT-3A04-11512-BCDE 4" D. HOT MLTPL
FT-3A04-1151L-BCDE 4" D. HOT MLTPL
FT-3A04-2011L-BCDE 4" D. HOT MLTPL
FT-3A04-2111L-BCDE 4" D. HOT MLTPL
FT-3A04-2141L-BCDE 4" D. HOT MLTPL
FT-3A05-1011L-BCDE 5" D. HOT MLTPL
FT-3A05-1111L-BCDE 5" D. HOT MLTPL
FT-3A05-2011L-BCDE 5" D. HOT MLTPL
FT-3A06-1111L-BCDE 6" D. HOT MLTPL
FT-3A06-1141L-BCDE 6" D. HOT MLTPL
FT-3A06-1151L-BCDE 6" D. HOT MLTPL
FT-3A06-1151L-BCDE 6" D. HOT MLTPL
FT-3A06-2011L-BCDE 6" D. HOT MLTPL
FT-3A06-2111L-BCDE 6" D. HOT MLTPL
FT-3A06-2141L-BCDE 6" D. HOT MLTPL
FT-3A08-1011L-BCDE 8" D. HOT MLTPL
FT-3A08-1111L-BCDE 8" D. HOT MLTPL
FT-3A08-1151L-BCDE 8" D. HOT MLTPL
FT-3A08-1351L-BCDE 8" D. HOT MLTPL
FT-3A08-3011L-BCDE 8" D. HOT MLTPL
FT-3A08-3311L-BCDE 8" D. HOT MLTPL
FT-3A10-1011L-BCDE 10" D. HOT MLTPL
FT-3A10-1111L-BCDE 10" D. HOT MLTPL
FT-3A10-1151L-BCDE 10" D. HOT MLTPL
FT-3A10-3011L-BCDE 10" D. HOT MLTPL
FT-3A10-3311L-BCDE 10" D. HOT MLTPL
FT-3A12-1011L-BCDE 12" D. HOT MLTPL
FT-3A12-1151L-BCDE 12" D. HOT MLTPL
FT-3A12-3011L-BCDE 12" D. HOT MLTPL
FT-3A12-3111L-BCDE 12" D. HOT MLTPL
FT-3A13-2011L-BCDE 1 1/4" D. HOT MLTPL
FT-3A14-1011L-BCDE 14" D. HOT MLTPL
FT-3A14-3011L-BCDE 14" D. HOT MLTPL
FT-3A15-1011L-BCDE 1 1/2" D. HOT MLTPL
FT-3A15-1111L-BCDE 1 1/2" D. HOT MLTPL
FT-3A15-1111L-BCDE 1 1/2" D. HOT MLTPL
FT-3A15-1141L-BCDE 1 1/2" D. HOT MLTPL
FT-3A15-1151L-BCDE 1 1/2" D. HOT MLTPL
FT-3A15-2011L-BCDE 1 1/2" D. HOT MLTPL
FT-3A16-1011L-BCDE 16" D. HOT MLTPL
FT-3A16-3011L-BCDE 16" D. HOT MLTPL
FT-3A24-1311L-BCDE 24" D. HOT MLTPL
FT-3A24-3111L-BCDE 24" D. HOT MLTPL
FT-3A24-3311L-BCDE 24" D. HOT MLTPL
FT-3A25-1011L-BCDE 1" D. HOT MLTPL
FT-3A25-1111L-BCDE 1" D. HOT MLTPL
FT-3A25-1141L-BCDE 2 1/2" D. HOT MLTPL
FT-3A25-1151L-BCDE 2 1/2" D. HOT MLTPL
FT-3A25-1311L-BCDE 1" D. HOT MLTPL
FT-3A25-2011L-BCDE 1" D. HOT MLTPL
FT-3A25-2111L-BCDE 1" D. HOT MLTPL
FT-3A25-3111L-BCDE 1" D. HOT MLTPL
FT-3A28-3111L-BCDE 28" D. HOT MLTPL
FT-3A30-1111L-BCDE 30" D. HOT MLTPL
FT-3A30-3111L-BCDE 30" D. HOT MLTPL
FT-3A32-1111L-BCDE 32" D. HOT MLTPL
FT-3A32-3111L-BCDE 32" D. HOT MLTPL
FT-3A34-1111L-BCDE 34" D. HOT MLTPL
FT-3A36-1111L-BCDE 36" D. HOT MLTPL
FT-3A36-3111L-BCDE 36" D. HOT MLTPL
FT-3A36-3311L-BCDE 36" D. HOT MLTPL
FT-3A40-1111L-BCDE 40" D. HOT MLTPL
FT-3A42-1111L-BCDE 42" D. HOT MLTPL
FT-3A42-3111L-BCDE 42" D. HOT MLTPL
FT-3A48-3111L-BCDE 48" D. HOT MLTPL



 
Onyx Valve Co. 
835 Industrial Highway
Cinnaminson, NJ 08077 
United States 
856-829-2888
Visit this company's website


Facility : Cinnaminson, NJ

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Valves
DBF[1] 1" - 60" CLD 23 MLTPL
Waffer Check Valve[1] 3" - 36" CLD 23 MLTPL

[1] Certified for use in tanks that are 2000 gallons or greater.  Certification does not
    include use in the transmission line.
[2] Certified for use with up to 25% lime slurry (CaOH2) with a maximum use level of 650
    mg/L.



 
Oriental Export Corporation 
75 AB Govt. Indl. Estate, Ganesh Nager
Charkop, Kandivali West 
Mumbai 400 067 
Mumbai, MM 400067 
India 
91 22 2967 9006
Visit this company's website


Facility : Gujarat, India

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Valves[G]
Brass Valve Fitting Flare x FIP, 801239 1/2" x 1/2" C. HOT MLTPL
Brass Valve Fitting Flare x FIP, 801249 3/8" x 1/2" C. HOT MLTPL
Comp Saddle Valve Self Tap, 800489 3/8" D. HOT MLTPL
Comp Saddle Valve Self Tap, 800639 1/4" D. HOT MLTPL

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



 
Orthos Liquid Systems, Inc. 
596 Browns Cove Road
Riverwalk Business Park 
Ridgeland, SC 29936 
United States 
843-987-7200


Facility : Ridgeland, SC

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Filter Underdrain
Centurion™ Monolithic Filter Underdrain [1] CLD 23 MLTPL
Centurion™ Monolithic Filter Underdrain with Filtration Nozzles [1] CLD 23 MLTPL

[1] Certified for a minimum flow of 0.7 gallons per minute per square foot of filter area.



 
Oxford Flow 
Unit 10, Tungsten Park
Downs Road, Witney 
Oxfordshire OX29 0AX 
United Kingdom 
44 18 6559 5248
Visit this company's website


Facility : Oxford, Oxfordshire, United Kingdom

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Valves [G]
IP-050BHAAA0A000000F[1] 2" CLD 23 MLTPL
IP-050BIAAA0A000000F[1] 2" CLD 23 MLTPL
IP-050BJAAA0A000000F[1] 2" CLD 23 MLTPL
IP-050CHAAA0A000000F[1] 2" CLD 23 MLTPL
IP-050CIAAA0A000000F[1] 2" CLD 23 MLTPL
IP-050CJAAA0A000000F[1] 2" CLD 23 MLTPL

[1] Trade name alternate format: follows IP-050(w)(x)AAA0A000000F
    IP - IP Series	
    50 - 50mm (2") size	
    W  - Basic Functionality (B, C)	
         B - Pressure Reducing
         C - Pressure Sustaining
    X  - Detail Function (H, I, J)	
         H - 0 - 8.5 bar
         I - 7 - 13.5 bar
         J - 12 - 25 bar
    A   - Body Material	  POM-C
    A   - End Connections	Inline/Water
    A   - Seal Material	  EPDM Static
    0   - Seat Material	  No Seat
    A   - Pilot Connections	  NPT - Stainless Steel (Solid)
    0   - Control Trim Type	  No Control Trim
    0   - Control Trim Material	  No Control Trim
    0   - Instrumentation and Ports	  None
    000	- 	
    F	Revision Version
[2] Trade name: follows IP(A)-B-C-D-E-F-G-H
    A - Size (050-300)
    B - Control range (Y, W, S, B, BL, G, R, or W)
    C - Pilot Style (SN or RN)
    D - Fitting configuration (SS)
    E - Fitting thread (N)
    F - Instrumentation (Z)
    G - Extra ports (N)
    H - Speed control (Y)
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



 
Paige Electric Company 
200 Sheffield Street
Suite 302 
Mountainside, NJ 07092 
United States 
800-327-2443 
908-687-7810


Facility : # 1 Columbus, NE

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Submersible Pump Cable [G]
P7327B-SP Hydroflex - Flexible Rubber Submersible Pump Cable [2] D. HOT MLTPL

[1] Certified for use in well casings 4" to 30" in diameter.  Certified for maximum cable
    length of 5,000 feet.  Certified for a minimum daily flow of 680 liters.
[2] Certified for use in well casings that are 6" to 14" in diameter and at least 40' in
    depth.  Certified for cables with a maximum length of 13'.  Certified for a minimum flow
    of 2.083 gallons per minute (11,354 liters per day).
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



Facility : Guanajuato, Mexico

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Pumps - Submersible Cables [G]
P7327B-SP Hydroflex - Flexible Rubber Submersible Pump Cable [1] D. HOT MLTPL

[1] Certified for use in well casings that are 6" to 14" in diameter and at least 40' in
    depth.  Certified for cables with a maximum length of 13'.  Certified for a minimum flow
    of 2.083 gallons per minute (11,354 liters per day).
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



 
Pall Corporation 
25 Harbor Park Drive
Port Washington, NY 11050 
United States 
516-484-3600
Visit this company's website


Facility : Timonium, MD

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Microfiltration Devices[1]
Claris® CLR 1 [2] CLD 23 MLTPL
Claris® CLR 10 [2] CLD 23 MLTPL
Claris® CLR 20 [2] CLD 23 MLTPL
Claris® CLR 3 [2] CLD 23 MLTPL
Claris® CLR 30 [2] CLD 23 MLTPL
Claris® CLR 40 [2] CLD 23 MLTPL
Claris® CLR 5 [2] CLD 23 MLTPL
Claris® CLR 50 [2] CLD 23 MLTPL
Claris® CLR 75 [2] CLD 23 MLTPL
Micro-Web II MW 1 [2] CLD 23 MLTPL
Micro-Web II MW 10 [2] CLD 23 MLTPL
Micro-Web II MW 20 [2] CLD 23 MLTPL
Micro-Web II MW 3 [2] CLD 23 MLTPL
Micro-Web II MW 30 [2] CLD 23 MLTPL
Micro-Web II MW 40 [2] CLD 23 MLTPL
Micro-Web II MW 5 [2] CLD 23 MLTPL
Micro-Web II MW 50 [2] CLD 23 MLTPL
Micro-Web II MW 75 [2] CLD 23 MLTPL

[1] Only the following end configuration/sealing options are Certified:
    DOE Industrial: Plain cartridge with no end configuration/sealing options
    M3N: 222 end cap & 222 BUNA o-rings on one end, Button adapter on other end
    M8N: 222 end cap & 222 BUNA o-rings on one end, Spear adapter on other end
    M3HN: 222 end cap & 222 BUNA o-rings on one end, M3HN adapter on other end
    
    Filters have a 2 1/2" outside diameter and are available in 9 3/4" - 50" lengths.
[2] Certified for a minimum daily flow of 3600 gallons per 10" length.



Facility : Cortland, NY

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Filtration Devices/Components
HFU620CAS010JUMW [1] CLD 23 MLTPL
HFU620CAS010JUW [1] CLD 23 MLTPL
HFU640CAS010JUMW [1] CLD 23 MLTPL
HFU640CAS010JUW [1] CLD 23 MLTPL
HFU660CAS010JUMW [1] CLD 23 MLTPL
HFU660CAS010JUW [1] CLD 23 MLTPL
Pall GRP Rack 6RKHF610F1[A]-[B]-[C]-[D] [2] CLD 23 MLTPL
Ultipleat High Flow HFUYDS620020JUMW [1] CLD 23 MLTPL
Ultipleat High Flow HFUYDS620045JUMW [1] CLD 23 MLTPL
Ultipleat High Flow HFUYDS620060JUMW [1] CLD 23 MLTPL
Ultipleat High Flow HFUYDS620100JUMW [1] CLD 23 MLTPL
Ultipleat High flow HFUJDS660060JUMW [1] CLD 23 MLTPL
Ultipleat High flow HFUJDS660200JUMW [1] CLD 23 MLTPL
Ultipleat High flow HFUYDS640100JUMW [1] CLD 23 MLTPL
Ultipleat High flow HFUYDS640200JUMW [1] CLD 23 MLTPL
Ultipleat High flow HFUYDS660045JUMW [1] CLD 23 MLTPL
Ultipleat High flow HFUYDS660200JUMW [1] CLD 23 MLTPL
Ultipleat High flow HFUYDS660400JUMW [1] CLD 23 MLTPL

[1] Media code
    J: HDC-II pleated PP
    Y: Ultipleat profile pleated depth PP
    Filter dimensions (in/mm)
    620: 6/152.4 x 20/508
    640: 6/152.4 x 40/1016
    660: 6/152.4 x 60/1524
    Micron code
    045: 4.5
    060: 6.0
    100: 10
    200: 20
    400: 40
    Certified for point-of-entry (POE) and municipal end uses.
[2] Certified for a minimum flow of 1,635,100 liters per day.
    Certified for use with Ultipleat cartridges only.
    [A]: Housing nozzle
         S: Std. duplex 2205
         Z: Zeron option
    [B]: Vent/Drain ports
         0: Null (Blind flanges)
         V: Vent/Drain kit option
    [C]: Isolation valves
         0: Null (Blind flanges)
         N: Nylon-Coated manual butterfly valve kit option
         S: SAF 2507 manual butterfly valve kit option
    [D]: Expansion joints
         0: Null (none)
         I: Imperial kit 10" x 10" ANSI
         M: Metric kit 10" ANSI x DN250



 
Parker Hannifin Corporation 
8145 Lewis Road
Minneapolis, MN 55427 
United States 
763-525-4258
Visit this company's website


Facility : Grantsburg, WI

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Valves[G]
FWM-V-01 3/4" D. HOT MLTPL

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



 
Parker Hannifin Corporation 
6035 Parkland Boulevard
Cleveland, OH 44124 
United States 
805-604-3400
Visit this company's website


Facility : Oxnard, CA

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Filtration Devices/Components
Fulflo Durabond Element[1] [2] CLD 23 MLTPL

[1] Certification includes the element only, and does not include the end caps, o-rings, or
    exterior housing.  Evaluated for use in water treatment facility or distribution system
    where the water flow exceeds 1440 gallons/day.
[2] Certified sizes are: 2 1/2" O.D. x 10" long through 2 1/2" O.D. x 50" long.

Microfiltration Devices
Fulflo MegaBond Nominal MBN [A] M [B]-[C]-[D][3] [4] CLD 23 MLTPL
Fulflo® MegaBond™ Absolute MBA [A] M [ B]-[C]-[D][5] [4] CLD 23 MLTPL
Poly-Mate X [A]-[B][C][D]-[Y][6] [7] [8] [9] CLD 23 MLTPL

[3] A - Micron rating (0.5 - 75 um)	
    B - Nominal length	
        9-4  - 9 3/4"	
        10   - 10"	
        19-4 - 19 1/2"	
        20   - 20"	
        29-4 - 29 1/4"	
        30   - 30"	
        39-4 - 39"	
        40   - 40"	
        50   - 50"	
    C - End cap configuration	
        None - double open end - standard plain stick - without gasket	
        DO   - double open end with gasket	
    D - Seal Materials	
        None - double open end - standard plain stick- without gasket	
    E - EPDM gasket
[4] Certified for a minimum daily flow of 2808 liters per 10" equivalent.
[5] A: Micron Rating (0.5-100 um)
    B: Nominal Length
    9-4: 9 3/4"
    10: 10"
    19-4: 19 1/2"
    20: 20"
    29-4: 29 1/4"
    30: 30"
    39-4: 39"
    40: 40"
    50: 50"
    C: End Cap Configuration
    None: double open end - standard plain stick - without gasket
    DO: double open end with gasket
    D: Seal Material
    None: double open end - standard plain stick - without gasket
    E: EPDM gasket
[6] A - Cartridge code: 005-600
    B - Nominal Length 10" - 40"
    C - Core: A (natural polypropylene), F (glass filled polypropylene) or G (304 
        stainless steel)
    D - Seal material: P (polyethylene foam), E (EPR o-ring), N (Buna-N), S (silicone), or 
        X (no seal material)
    Y - End cap configurations: TC, TF, TX, DO, SC, SF, STC, SSC, SSF, DX
[7] Only products bearing the NSF Mark on the product, product packaging, and/or
    documentation shipped with the product are Certified.
[8] 2.5" OD x 10" long - 2.5" OD x 40" long.
[9] Certified for a minimum flow of 550 liters per day.



Facility : Mineral Wells, TX

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Microfiltration Devices
FulFlo Honeycomb Filter [1] CLD 23 MLTPL
Fulflo® ParMax™ RCP[A]-[B]EPP[2] 20" - 60" CLD 23 MLTPL

[1] Evaluated for use in water treatment plant or distribution systems and where the water
    flow exceeds 5450 liters/day.
    
    
[2] Certified for a minimum daily flow of 28,800 gallons (109,020 liters).
    
    A - Retention Rating (0.8 - 90 microns)
    B - Length 20" - 60"
    
    



 
Parker Hannifin EMEA Sarl 
La Tuiliére 6
Etoy 
1163 
Switzerland 
420 606 795 620


Facility : Chomutov, Czech Republic

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Filtration Devices/Components
XtreamPure, Series XP-L 2XXx[1] [G] 15.97" x 53.2" C. HOT MLTPL
XtreamPure, Series XP-L 4XXx[1] [G] 15.97" x 103.2" C. HOT MLTPL
XtreamPure, Series XP-L 6XXx[1] [G] 15.97" x 153.2" C. HOT MLTPL
XtreamPure, Series XPHP-L 4XXXXx[1] [G] 15.97" x 103.2" C. HOT MLTPL
XtreamPure, Series XPHP-L 6XXXXx[1] [G] 15.97" x 153.2" C. HOT MLTPL

[1] XtreamPure, Series XP-L 2XXXXx is certified for a minimum daily filtrate generation of
    960,000 liters.
    XtreamPure, Series XP-L 4XXXXx and XtreamPure, Series XPHP-L 4XXXXx are certified for a
    minimum daily filtrate generation of
    1,440,000 liters.
    XtreamPure, Series XP-L 6XXXXx and XtreamPure, Series XPHP-L 6XXXXx are certified for a
    minimum daily filtrate generation of
    1,920,000 liters.
    
    XXXXx, where:
    XXXX: Micron rating
          010  - 1 micron
          050  - 5 micron
          100  - 10 micron
          200  - 20 micron
          300  - 30 micron
          400  - 40 micron
          700  - 70 micron
          1000 - 100 micron
    x:    Seal type
          V - Viton
          E - EPDM
          B - BUNA*
          *Applies only to Series XPHP-L.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



 
Pentair Flow Technologies LLC 
293 Wright Street
Delavan, WI 53115 
United States 
888-782-7483 
262-728-7483
Visit this company's website


Facility : North Aurora, IL

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Pumps[1] [G]
Fairbanks Nijhuis Series 1620 [2] CLD 23 MLTPL
Fairbanks Nijhuis Series 1650 [2] CLD 23 MLTPL

[1] Only products bearing the NSF Mark on the product, product packaging, and/or
    documentation shipped with the product are Certified.
[2] Aurora Pump sizes (outlet size x inlet size x case bore/impeller size) / Fairbanks
    Nijhuis sizes
    1.25" x 1.5" x 7" / 1 1/4" -1621 & -1651
    1.25" x 1.5" x 9.5" / 1 1/4" - 1622 & -1652
    1.5" x 2" x 7" / 1 1/2" -1621 & -1651
    1.5" x 2" x 9.5" / 1 1/2" - 1624 & -1654
    1.5" x 2" x 11" / 1 1/2 " -1622 & -1652
    1.5" x 2" x 12" / 1 1/2" -1623 & -1653
    2" x 2.5" x 7" A / 2" -1621A  & -1651A
    2" x 2.5" x 9.5" / 2" -1622 & -1652
    2" x 3" x 11" / 2" -1623 & -1653
    2" x 3" x 13.5" / 2" -1624 & -1654
    2.5" x 3" x 7" / 2 1/2" -1621 & -1651
    2.5" x 3" x 9.5" / 2 1/2" -1622 & -1652
    2.5" x 3" x 13.5" / 2 1/2" -1623 & -1653
    3" x 4" x 7"A / 3"-1621A & 1651A
    3" x 4" x 9.5" / 3" -1622 & -1652
    3" x 4" x 11" / 3" -1623 & -1653
    3" x 4" x 13.5" / 3" -1624 & -1654
    4" x 5" x 7" A / 4" -1621A & -1651A
    4" x 5" x 9.5" / 4" -1622 & -1652
    4" x 5" x 11" A/ 4" -1623A & -1653A
    4" x 5" x 13.5" / 4" -1624 & -1654
    5" x 6" x 7"A / 5"-1621A & 1651A
    5" x 6" x 9.5" A/ 5" -1622A & -1652A
    5" x 6" x 11" / 5" -1623 & -1653
    5" x 6" x 13.5" / 5" -1624 & -1654
    6" x 8" x 9.5" / 6" -1621 & -1651
    6" x 8" x 11" A/ 6" -1622A & -1652A
    6" x 8" x 13.5" / 6" -1623 & -1653
    8" x 10" x 13.5" / 8" -1622 & -1652
[3] [N] is the brand designator and may be Berkeley, Pentair, Fairbanks-Nijhuis or Aurora. 
    BVM or PVM is the trade name – The I designator is for the 304 stainless steel and may
    only be used up to flow series 33.  The X designator is for 316 stainless steel and may
    be used with any flow series. 
    [B] is the flow series and may be 64, 90, 120, 150
    [C] is the number of impellers. 
    [D] is the number of smaller-diameter impellers for flow series 90, if present.
[4] Each flow series has the following inlet/outlet size:
    Flow Series 64, 90 – 4”
    Flow Series 120, 150 – 5”
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



 
Pentair Water India Pvt. Ltd. 
13845 Bishops Drive
Suite 200 
Brookfield, WI 53005 
United States 
262-238-4400
Visit this company's website


Facility : Salcette, India

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Miscellaneous Treatment Devices/Components [G]
87L09 - 1.5 8.7" AQF HP[1] 8" D. HOT MLTPL
90HXF12-6 9" XIGA 75[1] 9" D. HOT MLTPL
AquaLine Housing - 80CFXX-YY[2] 8" D. HOT MLTPL
Replace with "80L 15-3/6UF Membrane Housing"[6] [8] 8" D. HOT MLTPL

[1] Certified for a minimum daily flow of 10,000 L/day.
    Y - Length Code
        3   - 3 meter (132")
        4.5 - 4.5 meter (193")
        6   - 6 meter (256")
[2] Certified for a minimum daily flow of 1,152,000 L for use in public water treatment
    facilities.
    
    XX - PSI rating:
         15 - 150 PSI
         30 - 300 PSI
    
    YY - Length code:
    
         150 PSI model (XX = 15)
         40 - 47"
         60 - 67"
    
         300 PSI model (XX = 30)
         60 - 67"
[3] XX or XXX - PSI rating
                15  - 150
                30  - 300
                45  - 450
                60  - 600
                100 - 1000
                120 - 1200
[4] Certified for a minimum flow of 20,000 L/day.
    XX or XXX - PSI rating:
    30 = 300 PSI
    45 = 450 PSI
    60 = 600 PSI
    100 = 1000 PSI
    120 = 1200 PSI
    
    Y = length code 
                 300 PSI   450/600 PSI   1000/1200 PSI 
    1 = 1 meter 		(55”) 		(56'') 		    	(58'') 
    2 = 2 meters 		(95'') 		(96'') 			  (98") 
    3 = 3 meters 		(135") 		(136'') 		    	(138'') 
    4 = 4 meters 		(175'') 		(176") 		  	(178") 
    5 = 5 meters 		(215'') 		(216'') 			(218")
    6 = 6 meters		(255'') 		(256'')		   	(258'') 
    7 = 7 meters 		(295'') 		(296'') 			(298'') 
    8 = 8 meters 		(335") 		(336'') 		    	(338'')
[5] Certified for a minimum flow of 20,000 L/day.
    Y - Length code
        1 - 1 meter (57")
        2 - 2 meters (97")
        3 - 3 meters (137")
        4 - 4 meters (177")
        5 - 5 meters (217")
        6 - 6 meters (257")
        7 - 7 meters (297")
        8 - 8 meters (337")
[6] Product also complies with NSF/ANSI 372.
[7] XX - PSI rating: 
         30 - 300 
         45 - 450 
         60 - 600 
    Y - length code: 
        1 - 1 meter (49")
        2 - 2 meters (89") 
        3 - 3 meters (129") 
        4 - 4 meters (169") 
        5 - 5 meters (209") 
        6 - 6 meters (249")
[8] Certified for a minimum flow of 20,000 L/day.
        3 - 3 meters (135")
        6 - 6 meters (255")
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
      documentation shipped with the product are Certified.


 
PERSALT MEMBRANES LLC 
401 East Jackson Street
Suite 2340 
Tampa, FL 33602 
United States 
813 803 6125
Visit this company's website


Facility : # 3 China

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Reverse Osmosis Element[1] [2] [3]
PMBW-400LF 8" x 40" CLD 23 MLTPL
PMBW-400XLF 8" x 40" CLD 23 MLTPL
PMBW-4040LF 4" x 40" CLD 23 MLTPL
PMBW-4040XLF 4" x 40" CLD 23 MLTPL
PMES2-400LF 8" x 40" CLD 23 MLTPL
PMES2-4040LF 4" x 40" CLD 23 MLTPL
PMSW-400LF 8" x 40" CLD 23 MLTPL
PMSW-4040LF 4" x 40" CLD 23 MLTPL

[1] Size is expressed as Diameter x length.
[2] PMBW-400LF model is Certified for a minimum daily flow of 10,000 gallons
    PMBW-4040LF model is Certified for a minimum daily flow of 2,400 gallons
    PMES2-400LF model is Certified for a minimum daily flow of 10,000 gallons
    PMES2-4040LF model is Certified for a minimum daily flow of 2,200 gallons
    PMES2-4021HR model is Certified for a minimum daily flow of 950 gallons
    PMES2-2521HR model is Certified for a minimum daily flow of 400 gallons
    PMSW-400LF model is Certified for a minimum daily flow of 7,500 gallons
    PMSW-4040LF model is Certified for a minimum daily flow of 1,800 gallons
    PMBW-400XLF model is Certified for a minimum daily flow of 10,500 gallons
    PMBW-4040XLF model is Certified for a minimum daily flow of 2,300 gallons
[3] All models 2.5” in diameter require a 2 gpm flush for 24 hours using tap water.
    All models 4” in diameter require a 4 gpm flush for 24 hours using tap water.
    All models 8” in diameter require a 15 gpm flush for 24 hours using tap water.



 
Philmac Pty Ltd. 
47-59 Deeds Road
North Plympton 
South Australia 5152 
Australia 
800 755 899 
61 8 8300 9200


Facility : South Australia, Australia

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Ball Valves
Ball Valve 25 Tee UTC 27-34 x FNPT 1" (46515200) 3/4" x 1" CLD 23 MLTPL
Ball Valve Angle C/Stop Lock 1" CTS x 1" FNPT (46523330) 1" x 1" CLD 23 MLTPL
Ball Valve Angle C/Stop Lock 1" CTS x 3/4" FNPT (46523230) 1" x 3/4" CLD 23 MLTPL
Ball Valve Angle C/Stop Lock 3/4" CTS x 3/4" FNPT (46522230) 3/4" x 3/4" CLD 23 MLTPL
Ball Valve C/Stop Lock 1" CTS x 3/4" FNPT (46513220) 1" x 3/4" CLD 23 MLTPL
Ball Valve 20 Tee 1/2" FNPT (46500100) 1/2" CLD 23 MLTPL
Ball Valve 20 Tee 3/4" FNPT (46500200) 3/4" CLD 23 MLTPL
Ball Valve 25 Curb Stop 1" FI NPT (46532300) 1" CLD 23 MLTPL
Ball Valve 25 Curb Stop 1-1/4"" FI NPT (46551500) 1 1/2" CLD 23 MLTPL
Ball Valve 25 Curb Stop 3/4" FI NPT (46532200) 3/4" CLD 23 MLTPL
Ball Valve 25 Tee 21-27 UTC x FNPT 1" (46513200) 3/4" CLD 23 MLTPL
Ball Valve 25 Tee 1" FNPT (46500300) 1" CLD 23 MLTPL
Ball Valve 32 Tee 1-1/4" FNPT (46500400) 1 1/4" CLD 23 MLTPL
Ball Valve 40 Tee 1-1/2" FNPT (46500500) 1 1/2" CLD 23 MLTPL
Ball Valve 50 Curb Stop FNPT 2" (46561660) 2" CLD 23 MLTPL
Ball Valve 50 Tee FNPT 2" (46500600) 1" CLD 23 MLTPL
Ball Valve C/Stop Lock 1" CTS x 1" FNPT (46513320) 1" x 1" CLD 23 MLTPL
Ball Valve C/Stop Lock 3/4" CTS x 3/4" FNPT (46512220) 3/4" x 3/4" CLD 23 MLTPL



 
Phyn, LLC 
21250 Hawthorne Blvd
Suite 500 
Torrance, CA 90503 
United States 
602-762-5536


Facility : Selangor, Malaysia

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Water Meters[G]
PHYPF012 20 mm CLD 23 MLTPL

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



 
Piedmont Pacific 
300 Rue Street
Vallier Est Suite 340 
Quebec City, QC G1K 9C5 
Canada 
760-305-7616


Facility : Heilongjiang, China

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Filtration Devices/Components[1] [2]
QPV-PCF-1-30 6.4 L[3] CLD 23 MLTPL
QPV-PCF-1-30E 6.4 L[3] CLD 23 MLTPL
QPV-PCF-1-40 6.4 L[3] CLD 23 MLTPL
QPV-PCF-1-40E 6.4 L[3] CLD 23 MLTPL
QPV-PCF-1-60 6.4 L[3] CLD 23 MLTPL
QPV-PCF-1-60E 6.4 L[3] CLD 23 MLTPL
QPV-PCF-7-30 6.4 L[3] CLD 23 MLTPL
QPV-PCF-7-30E 6.4 L[3] CLD 23 MLTPL
QPV-PCF-7-40 6.4 L[3] CLD 23 MLTPL
QPV-PCF-7-40E 6.4 L[3] CLD 23 MLTPL
QPV-PCF-7-50 6.4 L[3] CLD 23 MLTPL
QPV-PCF-7-50E 6.4 L[3] CLD 23 MLTPL

[1] Only products bearing the NSF Mark on the product, product packaging, and/or
    documentation shipped with the product are Certified.
[2] Certified for use in municipal water treatment plants only.
[3] Certified for a minimum daily flow of 30,000 liters per day.



 
Piedmont Pacific Inc. 
330 St-Vallier East
Suite 340 
Quebec City, QC G1K 9C5 
Canada 
34 944 740 557
Visit this company's website


Facility : Karachi, Pakistan

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Microfiltration Devices[1]
Code PSW-(1)(2)(3)(4)(5)(6)-(7)(8)[2] [3] C. HOT MLTPL
Piedmont Filter Cartridges[2] [3] C. HOT MLTPL
Piedmont Filter Cartridges PMB(1)-(2)-(3)-(4)[4] [3] C. HOT MLTPL

[1] NSF has not conducted production control audits at this facility. Product Listing is
    based on type testing [ISO/IEC Guide 2: 1996(E/F/R) 14.5].
[2] (1) Media
           None - Extractables free polypropylene
           RO - Reverse osmosis
    (2) Length
          10 - 10"
          20 - 20"
          30 - 30"
          40 - 40"
          50 - 50"
    (3) Variation in length
          A - Specified length
          None - Nominal length
          Custom lengths are available from 10" to 72"
    (4) Micron rating (nominal)
          1 micron
          5 microns
          10 microns
          20 microns
          40 microns
          80 microns
          Custom micron rating available from 1 micron to 100 microns.
    (5) Outer diameter (mm)
          A - 63.5
          D - 100
          E - 60
         J - 114.5
         Custom outer diameters available from 55 mm to 155 mm.
    (6) End adapters
          E222 - Double 222 o-rings end cap
          E222/C - Two end caps, one with double 222 o-rings, other end flat closed
          EA - Spring end
          EF - Fin end
          EC - Closed end cap
          ER - Reusable stainless steel spring
          ES - Stepped end
          X - Extended core
         XT - Tapered extended core (all core media)
         None - No end adapters (double open end - DOE)
    (7) Core material
          S - Stainless steel 304/316L
         None - 100% polypropylene
    (8) Inner diameter (mm)
          27mm
          35mm
         Customer inner diameters are available in metal cores.
    Only cartridges 10" and longer have been reviewed and evaluated
[3] Only cartridges 10" and longer have been reviewed and evaluated for Standard 61. This
    product has not been reviewed or evaluated for point-of-use or point-of-entry
    applications.
[4] Super Fine Filter Cartridges PPF-(1)-(2)-(3)-(4) is denoted as follows:
    (1) Length in mm (254 – 1778)
    (2) Outer diameter in mm (50 – 150)
    (3) Weight in grams
    (4) Profile:
          P - Plain
          L - Lined
          G - Grooved
          D - Dotted
    Micron rating - available from 1 µm to 100 µm
    Inner Diameter (mm) – 28 mm – 29 mm



 
Piedmont Pacific, Inc. 
300 Rue Street - Vallier Est
Suite 340 
Quebec, QC G1K 9C5 
Canada 
418-688-0170
Visit this company's website


Facility : Zaragoza, Spain

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Filtration Devices / Components
Piperlink Permeate Connector / PLE [1] C. HOT MLTPL
Piperlink flexible hose connector / PLH [1] C. HOT MLTPL
Piperlink flexible hose connector / PLS [1] C. HOT MLTPL

[1] Piperlink permeate connector / PLE, Piperlink flexible hose connector / PLH and
    Piperlink rigid connector / PLS are Certified for use in reverse osmosis elements or
    ultrafiltration modules used exclusively in public water treatment plants. 
    
    Certified for a minimum daily flow of 16,800 liters.

NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
      documentation shipped with the product are Certified.
      


Facility : Sousse, Tunisia

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Miscellaneous Process Devices/Components[1]
MF-H-Style [6] D. HOT MLTPL
MF-V-Style [6] D. HOT MLTPL

[1] Since these models do not contain the filter cartridges no flushing is required.
    
    Q-Style    - Vertical Cartridge filter with quick opening system
    QH-Style   - Horizontal Cartridge filter with quick opening system
    XS-Style   - Vertical Cartridge filter with side inlet
    XSH-Style  - Horizontal Cartridge filter with side inlet
    XB-Style   - Vertical Cartridge filter with bottom inlet
    HV-Q-Style - High flow Vertical Cartridge filter with quick opening system
    HV-X-Style - High flow Vertical Cartridge filter with side inlet
    HH-Q-Style - High flow Horizontal Cartridge filter with quick opening system
    HH-X-Style - High flow Horizontal Cartridge filter with side inlet
    B-Q-Style  - Bag filter with quick opening system
    B-X-Style  - Traditional Bag filter
    S-Q-Style  - Strainer with quick opening system
    S-X-Style  - Traditional Strainer
    MF-V-Style - Vertical Media Filter
    MF-H-Style - Horizontal Media Filter
    S-XS–Style : Vertical Cartridge filter with side inlet
    S-XSH–Style : Horizontal Cartridge filter with side inlet
[2] B-Q Style models are certified for a minimum daily flow of 504,000 liters per day.
[3] B-X Style models are certified for a minimum daily flow of 6,720,000 liters per day.
[4] HH-Q Style and HV-Q-Style models are certified for a minimum daily flow of 960,000
    liters per day.
[5] HV-X Style and HH-X Style models are certified for a minimum daily flow of 10,080,000
    liters per day.
[6] MF-V-Style and MF-H-Style are certified for a minimum daily flow of 144,000 liters per
    day.
[7] Q-Style, QH-Style S-Q-Style, S-X-Style, S-XS-Style and S-XSH-Style models are certified
    for a minimum daily flow of 144,000 liters.
[8] XB Style models are certified for a minimum daily flow of 6,600,000 liters per day.
[9] XS Style and XSH-Style models are certified for a minimum daily flow of 5,880,000 liters
    per day.

NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
      documentation shipped with the product are Certified.


 
Plast-O-Matic Valves, Inc. 
1384 Pompton Avenue
Cedar Grove, NJ 07009 
United States 
973-256-3000
Visit this company's website


Facility : Kaohsiung, Taiwan

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Valves[G]
BT645-050EPFL-CP 1/2" C. HOT CPVC
BT645-050EPFL-PV 1/2" CLD 23 MLTPL
BT645-050VFL-CP 1/2" C. HOT CPVC
BT645-050VFL-PV 1/2" CLD 23 MLTPL
BT645-075EPFL-CP 3/4" C. HOT CPVC
BT645-075EPFL-PV 3/4" CLD 23 MLTPL
BT645-075VFL-CP 3/4" C. HOT CPVC
BT645-075VFL-PV 3/4" CLD 23 MLTPL
BT645-100EPFL-CP 1" C. HOT CPVC
BT645-100EPFL-PV 1" CLD 23 MLTPL
BT645-100VFL-CP 1" C. HOT CPVC
BT645-100VFL-PV 1" CLD 23 MLTPL
BT645-125EPFL-CP 1 1/4" C. HOT CPVC
BT645-125EPFL-PV 1 1/4" CLD 23 MLTPL
BT645-125VFL-CP 1 1/4" C. HOT CPVC
BT645-125VFL-PV 1 1/4" CLD 23 MLTPL
BT645-150EPFL-CP 1 1/2" C. HOT CPVC
BT645-150EPFL-PV 1 1/2" CLD 23 MLTPL
BT645-150VFL-CP 1 1/2" C. HOT CPVC
BT645-150VFL-PV 1 1/2" CLD 23 MLTPL
BT645-200EPFL-CP 2" C. HOT CPVC
BT645-200EPFL-PV 2" CLD 23 MLTPL
BT645-200VFL-CP 2" C. HOT CPVC
BT645-200VFL-PV 2" CLD 23 MLTPL
BT645-250EPFL-CP 2 1/2" C. HOT CPVC
BT645-250EPFL-PV 2 1/2" CLD 23 MLTPL
BT645-250VFL-CP 2 1/2" C. HOT CPVC
BT645-250VFL-PV 2 1/2" CLD 23 MLTPL
BT645-300EPFL-CP 3" C. HOT CPVC
BT645-300EPFL-PV 3" CLD 23 MLTPL
BT645-300VFL-CP 3" C. HOT CPVC
BT645-300VFL-PV 3" CLD 23 MLTPL
BT645-400EPFL-CP 4" C. HOT CPVC
BT645-400EPFL-PV 4" CLD 23 MLTPL
BT645-400VFL-CP 4" C. HOT CPVC
BT645-400VFL-PV 4" CLD 23 MLTPL
BT646-050EPFL-CP 1/2" C. HOT CPVC
BT646-050EPFL-PV 1/2" CLD 23 MLTPL
BT646-050VFL-CP 1/2" C. HOT CPVC
BT646-050VFL-PV 1/2" CLD 23 MLTPL
BT646-075EPFL-CP 3/4" C. HOT CPVC
BT646-075EPFL-PV 3/4" CLD 23 MLTPL
BT646-075VFL-CP 3/4" C. HOT CPVC
BT646-075VFL-PV 3/4" CLD 23 MLTPL
BT646-100EPFL-CP 1" C. HOT CPVC
BT646-100EPFL-PV 1" CLD 23 MLTPL
BT646-100VFL-CP 1" C. HOT CPVC
BT646-100VFL-PV 1" CLD 23 MLTPL
BT646-125EPFL-CP 1 1/4" C. HOT CPVC
BT646-125EPFL-PV 1 1/4" CLD 23 MLTPL
BT646-125VFL-CP 1 1/4" C. HOT CPVC
BT646-125VFL-PV 1 1/4" CLD 23 MLTPL
BT646-150EPFL-CP 1 1/2" C. HOT CPVC
BT646-150EPFL-PV 1 1/2" CLD 23 MLTPL
BT646-150VFL-CP 1 1/2" C. HOT CPVC
BT646-150VFL-PV 1 1/2" CLD 23 MLTPL
BT646-200EPFL-CP 2" C. HOT CPVC
BT646-200EPFL-PV 2" CLD 23 MLTPL
BT646-200VFL-CP 2" C. HOT CPVC
BT646-200VFL-PV 2" CLD 23 MLTPL
BT646-250EPFL-CP 2 1/2" C. HOT CPVC
BT646-250EPFL-PV 2 1/2" CLD 23 MLTPL
BT646-250VFL-CP 2 1/2" C. HOT CPVC
BT646-250VFL-PV 2 1/2" CLD 23 MLTPL
BT646-300EPFL-CP 3" C. HOT CPVC
BT646-300EPFL-PV 3" CLD 23 MLTPL
BT646-300VFL-CP 3" C. HOT CPVC
BT646-300VFL-PV 3" CLD 23 MLTPL
BT646-400EPFL-CP 4" C. HOT CPVC
BT646-400EPFL-PV 4" CLD 23 MLTPL
BT646-400VFL-CP 4" C. HOT CPVC
BT646-400VFL-PV 4" CLD 23 MLTPL
MBV300EPFL-CP 3" C. HOT CPVC
MBV300EPFL-PV 3" CLD 23 MLTPL
MBV300VFL-CP 3" C. HOT CPVC
MBV300VFL-PV 3" CLD 23 MLTPL
MBV400EPFL-CP 4" C. HOT CPVC
MBV400EPFL-PV 4" CLD 23 MLTPL
MBV400VFL-CP 4" C. HOT CPVC
MBV400VFL-PV 4" CLD 23 MLTPL

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



 
PMP Precision Valve Co. Ltd. 
3530 Poirier
St-Laurent, QC H4R-2J5 
Canada 
866-694-3334


Facility : Tianjin, China

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Valves[G]
GV2-2F25250-080 3" CLD 23 MLTPL
GV2-2F25250-100 4" CLD 23 MLTPL
GV2-2F25250-150 6" CLD 23 MLTPL
GV2-2F25250-200 8" CLD 23 MLTPL
GV2-2F25250-250 10" CLD 23 MLTPL
GV2-2F25250-300 12" CLD 23 MLTPL
GV2-2F25250-350 14" CLD 23 MLTPL
GV2-2F25250-400 16" CLD 23 MLTPL
GV2-2F25250-450 18" CLD 23 MLTPL
GV2-2F25250-500 20" CLD 23 MLTPL
GV2-2F25250-600 24" CLD 23 MLTPL
GV2-2F25250-750 30" CLD 23 MLTPL
GV2-2F25250-900 36" CLD 23 MLTPL
GV2-2F25250-1050 42" CLD 23 MLTPL
GV2-2F25250-1200 48" CLD 23 MLTPL

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



 
POLY-CAM Inc. 
1101 McKinley Street
Anoka, MN 55303 
United States 
763-786-6682
Visit this company's website


Facility : Anoka, MN

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Service Saddles [G]
Series 415 Side Fusion Tapping Saddle Fittings [415-(u)(v)(w)(x)(y)(z)][1] 1/2" - 4" CLD 23 MLTPL

[1] u - Outlet Size
        0050 - 1/2"
        0075 - 3/4"
        0100 - 1"
        0125 - 1 1/4"
        0150 - 1 1/2"
        0200 - 2"
        0300 - 3"
        0400 - 4"
    v - Type of threads
        N - National Pipe Threads (NPT)
        C - AWWA threads
    w - Outlet Material
        BZ - C954 Alum Bronze
        s4 - 304 Stainless Steel
        s6 - 316 Stainless Steel
        s3 - 303 Stainless Steel
    x - Main Size (2" - 48")
    y - Main Diameter Type
        I - Iron Pipe Size
        D - Ductile Iron Pipe Size
    z - Base Size Diameter (1.5" - 6")
    Size refers to the outlet size.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



 
Polymem SA 
3, rue de l'industrie
ZI de Vic 
31320 Castanet Tolosan 
France 
33 561 317 866
Visit this company's website


Facility : Castanet Tolosan, France

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Microfiltration Devices[1]
MF80 [2] CLD 23 MLTPL
MF80 PVDF NEOPHIL [2] CLD 23 MLTPL
MF100L [3] CLD 23 MLTPL
MF100L PVDF NEOPHIL [3] CLD 23 MLTPL
MF100LL [4] CLD 23 MLTPL
MF100LL PVDF NEOPHIL [4] CLD 23 MLTPL
MF100XL [5] CLD 23 MLTPL
MF100XL PVDF NEOPHIL [5] CLD 23 MLTPL
MF120 [6] CLD 23 MLTPL
MF120 PVDF NEOPHIL [6] CLD 23 MLTPL
MF240[9] [7] CLD 23 MLTPL
MF240 PVDF NEOPHIL [7] CLD 23 MLTPL

[1] Product requires a 500L/h flush for 24 hours with potable water before being placed into
    service.
[2] Testing and evaluation based on a minimum flow of 30,200 L/day.
[3] Testing and evaluation based on a minimum flow of 3,200 L/day.
[4] Testing and evaluation based on a minimum flow of 8,733 L/day.
[5] Testing and evaluation based on a minimum flow of 4,300 L/day.
[6] Testing and evaluation based on a minimum flow of 82,000 L/day.
[7] Testing and evaluation based on a minimum flow of 371,000 L/day.
[9] This module includes hollow fiber membrane elements UF2555, MF2555, UF2555 PVDF NEOPHIL
    et MF2555 PVDF NEOPHIL.

Ultrafiltration Devices
UF80[1] [2] CLD 23 MLTPL
UF-80 G Housing [8] [10] CLD 23 MLTPL
UFMF80G [8] [10] CLD 23 MLTPL
UFMF80G PVDF NEOPHIL [8] [10] CLD 23 MLTPL
UF80 PVDF NEOPHIL[1] [2] CLD 23 MLTPL
UF100L[1] [3] CLD 23 MLTPL
UF100L PVDF NEOPHIL[1] [3] CLD 23 MLTPL
UF100LL[1] [4] CLD 23 MLTPL
UF100LL PVDF NEOPHIL[1] [4] CLD 23 MLTPL
UF100XL[1] [5] CLD 23 MLTPL
UF100XL PVDF NEOPHIL[1] [5] CLD 23 MLTPL
UF120[1] [6] CLD 23 MLTPL
UF120 PVDF NEOPHIL[1] [6] CLD 23 MLTPL
UF240[1] [9] [7] CLD 23 MLTPL
UF240 PVDF NEOPHIL[1] [7] CLD 23 MLTPL

[1] Product requires a 500L/h flush for 24 hours with potable water before being placed into
    service.
[2] Testing and evaluation based on a minimum flow of 30,200 L/day.
[3] Testing and evaluation based on a minimum flow of 3,200 L/day.
[4] Testing and evaluation based on a minimum flow of 8,733 L/day.
[5] Testing and evaluation based on a minimum flow of 4,300 L/day.
[6] Testing and evaluation based on a minimum flow of 82,000 L/day.
[7] Testing and evaluation based on a minimum flow of 371,000 L/day.
[8] Testing and evaluation based on a minimum flow of 60,000 liters per day.
[9] This module includes hollow fiber membrane elements UF2555, MF2555, UF2555 PVDF NEOPHIL
    et MF2555 PVDF NEOPHIL.
[10] Models UFMF80G and UFMF80G PVDF NEOPHIL require a 117 L/min flush with 11613 liters of
     tap water before being placed into service.



 
Polypipe Italia S.r.l. 
Loc. Pianmercato, 5
16044 Cicagna(GE) 
Italy 
39 01 859 2399
Visit this company's website


Facility : Cicagna(GE), Italy

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Valves
Effast Ball Valves [1] [2] CLD 23 MLTPL
Effast Butterfly Valve Series H [3] CLD 23 MLTPL
Effast Butterfly Valve Series P [3] CLD 23 MLTPL
Effast Check Valves CKD Series [4] CLD 23 MLTPL

[1] Certified for the following products:
    BK1D (Industrial Double Union, Solvent Cement)
      16 mm (BDRBK1D0160)
      20 mm (BDRBK1D0200)
      25 mm (BDRBK1D0250)
      32 mm (BDRBK1D0320)
      40 mm (BDRBK1D0400)
      50 mm (BDRBK1D0500)
      63 mm (BDRBK1D0630)
      75 mm (BDRBK1D0750)
      90 mm (BDRBK1D0900)
      110 mm (BDRBK1D1100)
    BK1E (Industrial Double Union, BSP Threaded)
      3/8" (BERBK1E016A)
      1/2" (BERBK1E020B)
      3/4" (BERBK1E025C)
      1" (BERBK1E032D)
      1 1/4" (BERBK1E040E)
      1 1/2" (BERBK1E050F)
      2" (BERBK1E063G)
      2 1/2" (BERBK1E075H)
      3" (BERBK1E090I)
      4" (BERBK1E110L)
    BK1A (Industrial Double Union, BS)
      3/8" (BARBK1A0160)
      1/2" (BARBK1A0200)
      3/4" (BARBK1A0250)
      1" (BARBK1A0320)
      1 1/4" (BARBK1A0400)
      1 1/2" (BARBK1A0500)
      2" (BARBK1A0630)
      2 1/2" (BARBK1A0750)
      3" (BARBK1A0900)
      4" (BARBKA1100)
    BK1F (Industrial Flanged Double Union, Solvent Cement)
      20 mm (BDRBK1F0200)
      25 mm (BDRBK1F0250)
      32 mm (BDRBK1F0320)
      40 mm (BDRBK1F0400)
      50 mm (BDRBK1F0500)
      63 mm (BDRBK1F0630)
      75 mm (BDRBK1F0750)
      90 mm (BDRBK1F0900)
      110 mm (BDRBK1F1100)
    BXD (Industrial Double Union, Metric)
      16 mm (BDRBXD0160)
      20 mm (BDRBXD0200)
      25 mm (BDRBXD0250)
      32 mm (BDRBXD0320)
      40 mm (BDRBXD0400)
      50 mm (BDRBXD0500)
      63 mm (BDRBXD0630)
      75 mm (BDRBXD0750)
      90 mm (BDRBXD0900)
      110 mm (BDRBXD1100)
    BXE (Industrial Double Union, BSP Threaded)
      3/8" (BERBXE016A)
      1/2" (BERBXE020B)
      3/4" (BERBXE025C)
      1" (BERBXE032D)
      1 1/4" (BERBXE040E)
      1 1/2" (BERBXE050F)
      2" (BERBXE063G)
      2 1/2" (BERBXE075H)
      3" (BERBXE090I)
      4" (BERBXE110L)
    BXA (Industrial Double Union, BS)
      3/8" (BARBXA0160)
      1/2" (BARBXA0200)
      3/4" (BARBXA0250)
      1" (BARBXA0320)
      1 1/4" (BARBXA0400)
      1 1/2" (BARBXA0500)
      2" (BARBXA0630)
      2 1/2” (BARBXA0750)
      3" (BARBXA0900)
      4" (BARBXA1100)
    BXF (Industrial Flanged Double Union, Solvent Cement)
      20 mm (BDRBXF0200)
      25 mm (BDRBXF0250)
      32 mm (BDRBXF0320)
      40 mm (BDRBXF0400)
      50 mm (BDRBXF0500)
      63 mm (BDRBXF0630)
      75 mm (BDRBXF0750)
      90 mm (BDRBXF0900)
      110 mm (BDRBXF1100)
    SXD (Industrial Single Union, Metric)
      20 mm (BDRSXD0200)
      25 mm (BDRSXD0250)
      32 mm (BDRSXD0320)
      40 mm (BDRSXD0400)
      50 mm (BDRSXD0500)
      63 mm (BDRSXD0630)
      75 mm (BDRSXD0750)
      90 mm (BDRSXD0900)
      110 mm (BDRSXD1100)
    SXE (Industrial Single Union, BSP Threaded)
      1/2" (BERSXE020B)
      3/4" (BERSXE025C)
      1" (BERSXE032D)
      1 1/4" (BERSXE040E)
      1 1/2" (BERSXE050F)
      2" (BERSXE063G)
      2 1/2" (BERSXE075H)
      3" (BERSXE090I)
      4" (BERSXE110L)
    BVD (Double Union, Metric Solvent Cement)
      16 mm (BDRBVD0160)
      20 mm (BDRBVD0200)
      25 mm (BDRBVD0250)
      32 mm (BDRBVD0320)
      40 mm (BDRBVD0400)
      50 mm (BDRBVD0500)
      63 mm (BDRBVD0630)
      75 mm (BDRBVD0750)
      90 mm (BDRBVD0900)
      110 mm (BDRBVD1100)
    BVE (Double Union, BSP Threaded)
      3/8" (BERBVE016A)
      1/2" (BERBVE020B)
      3/4" (BERBVE025C)
      1" (BERBVE032D)
      1 1/4" (BERBVE040E)
      1 1/2" (BERBVE050F)
      2" (BERBVE063G)
      2 1/2" (BERBVE075H)
      3" (BERBVE090I)
      4" (BERBVE110L)
    BVA (Double Union, BS Solvent Cement)
      3/8" (BARBVA0160)
      1/2" (BARBVA0200)
      3/4" (BARBVA0250)
      1" (BARBVAA0320)
      1 1/4" (BARBVA0400)
      1 1/2" (BARBVA0500)
      2" (BARBVA0630)
      2 1/2" (BARBVA0750)
      3" (BARBVA0900)
      4" (BARBVA1100)
    BVS (Double Union, ASTM)
      20 mm (BSRBVS0200)
      25 mm (BSRBVS0250)
      32 mm (BSRBVS0320)
      40 mm (BSRBVS0400)
      50 mm (BSRBVS0500)
      63 mm (BSRBVS0630)
      75 mm (BSRBVS0750)
      90 mm (BSRBVS0900)
      110 mm (BSRBVS1100)
    BVN (Double Union, NPT Threaded)
      1/2" (BNRBVN020B)
      3/4" (BNRBVN025C)
      1" (BNRBVN032D)
      1 1/4" (BENBVN040E)
      1 1/2" (BENBVN050F)
      2" (BENBVN063G)
      2 1/2" (BENBVN075H)
      3" (BENBVN090I)
      4" (BENBVN110L)
    BVJ (Double Union, JIS)
      20 mm (BJRBVJ0200)
      25 mm (BJRBVJ0250)
      32 mm (BJRBVJ0320)
      40 mm (BJRBVJ0400)
      50 mm (BJRBVJ0500)
      63 mm (BJRBVJ0630)
      75 mm (BJRBVJ0750)
      90 mm (BJRBVJ0900)
      110 mm (BJRBVJ1100)
[2] SVD (Single Union, Metric)
      20 mm (BDRSVD0200)
      25 mm (BDRSVD0250)
      32 mm (BDRSVD0320)
      40 mm (BDRSVD0400)
      50 mm (BDRSVD0500)
      63 mm (BDRSVD0630)
      75 mm (BDRSVD0750)
      90 mm (BDRSVD0900)
      110 mm (BDRSVD1100)
    SVE (Single Union, BSP, Threaded)
      1/2" (BERSVE020B)
      3/4" (BERSVE025C)
      1" (BERSVE032D)
      1 1/4" (BERSVE040E)
      1 1/2" (BERSVE050F)
      2" (BERSVE063G)
      2 1/2" (BERSVE075H)
      3" (BERSVE090I)
      4" (BERSVE110L)
    SVA (Single Union, BS, Solvent Cement)
      1/2" (BARSVA0200)
      3/4" (BARSVA0250)
      1" (BARSVA0320)
      1 1/4" (BARSVA0400)
      1 1/2" (BARSVA0500)
      2" (BARSVA0630)
      2 1/2" (BARSVA0750)
      3" (BARSVA0900)
      4" (BARSVA1100)
[3] Approved control options include handle, gearbox, electric, and pneumatic.
[4] Certified for the following sizes:
      65 mm (CDRCKD0750)
      80 mm (CDRCKD0900)
      100 mm (CDRCKD1100)
      125 mm (CDRCKD1400)
      150 mm (CDRCKD1600)



 
Powers, a Watts Regulator Co. Division 
815 Chestnut Street
North Andover, MA 01845 
United States 
978-688-1811


Facility : Franklin, NH

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Valves [G]
LFLM490-(Y)[1] 1/2" C. HOT MLTPL
LFLM491-(Y)[1] 3/4" C. HOT MLTPL
LFLM492-(Y)[1] 1" C. HOT MLTPL
LFLM495-(Y)[1] 1/2" C. HOT MLTPL
LFLM496-(Y)[1] 3/4" C. HOT MLTPL
LFLM497-(Y)[1] 1" C. HOT MLTPL
LFLMC490-(Y)[1] 1/2" C. HOT MLTPL
LFLMC491-(Y)[1] 3/4" C. HOT MLTPL
LFLMC492-(Y)[1] 1" C. HOT MLTPL

[1] (Y) Represents the following:
        1 or 101 – FNPT ends
        2 or 102 – C12200 sweat (solder) ends
        3 or 103 – CPVC ends
        4 or 104 – PEX ends
        5 or 105 – Quick connect ends
        6 or 106  - Cold Expansion Fittings
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



Facility : St Pauls, NC

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Valves[G]
LFIS150 1 1/2" C. HOT MLTPL
LFIS200 2" C. HOT MLTPL

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



 
Pro Water Parts 
1359 Gresham Rd
Marietta, GA 30062 
United States 
877-658-9009 
770-420-6447
Visit this company's website


Facility : PWP 2

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Pressurized Water Storage Tanks
1ET2G12F 8 L CLD 23 MLTPL
1ET5G12F 18 L CLD 23 MLTPL



 
PRODN INTELLIGENT PUMP (ANHUI) CO., LTD. 
No.1128 Nanciyi Road
Anhui Xinwu Economic Dev Zone 
Wanzhi Dist, Wuhu, Anhui 241100 
China 
86 177 2999 2155


Facility : Wuhu, Anhui, China

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Pumps[G]
Permanent magnet multistage centrifugal pump CHW1.5-25ZER 1" CLD 23 MLTPL
Permanent magnet multistage centrifugal pump CHW1.5-42ZER 1" CLD 23 MLTPL
Permanent magnet multistage centrifugal pump CHW2-32ZER 1" CLD 23 MLTPL
Permanent magnet multistage centrifugal pump CHW3-40ZER 1" CLD 23 MLTPL
Permanent magnet multistage centrifugal pump H2-32Z 1" CLD 23 MLTPL
Permanent magnet multistage centrifugal pump H3-40Z 1" CLD 23 MLTPL

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



 
Prominent Fluid Controls 
136 Industry Drive
Pittsburgh, PA 15275 
United States 
412-787-2484
Visit this company's website


Facility : Pittsburgh, PA

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Chemical Metering Pumps
DFXA0365[4] 1/2" x 3/8" CLD 23 MLTPL
DFXA0518[4] 1/2" - 3/8" CLD 23 MLTPL
DFXA0530[4] 1/2" - 3/8" CLD 23 MLTPL
DFXA0565[4] 1/2" - 3/8" CLD 23 MLTPL
DFXA0730[4] 1/2" - 3/8" CLD 23 MLTPL

[1] #### - Pump version
           Beta         - 0220, 0232, 0413, 0420, 0708, 0713, 1000, 1008, 1601, 1602, 1604,
    2001, 
           2002, 2504
           Beta/X         - 16006, 07018, 04028, 02050
           Concept Plus - 0215, 0308, 0704, 1000, 1002, 1601, 0309
           Delta        - 0280, 0450, 0730, 1020, 1608, 1612, 2508  
           Gamma/L      - 0220, 0232, 0413, 0420, 0708, 0713, 1000, 1005, 1008, 1601, 
                          1602, 1605  
           Gamma/X      - 1602, 1604, 0708, 1009, 0414, 0715, 0220, 0424
           Gamma/XL     - 0280, 0450, 0730, 1020, 1608, 1612
           Sigma/1      - 04084, 04120, 07042, 07065, 10022, 10044, 10050, 12017, 12035     
    
           Sigma/2      - 04350, 07120, 07220, 16050, 16090, 16130
           Sigma/3      - 040830, 070410, 070580, 120145, 120190, 120270
    $    - Liquid End Version 
           0 - No bleed valve, no valve springs 
           2 - With bleed valve, no valve springs 
           7 - Self bleeding, with groove
    @    - Diaphragm 
           0 - Standard Diaphragm, PTFE Version (Non-Sigma)
           1 - Double Diaphragm with diaphragm rupture indicator (Non-Sigma)
           A - Safety Diaphragm with stop function (Sigma only)
           S - Safety Diaphragm with visual indicator (Sigma only)
    &    - Positive Displacement Element 
           0 - Standard Diaphragm, PTFE Version 
           1 - With membrane rupture signaling
    
    Any codes not specifically indicated in the trade name or listing notes represent
    features that do not affect the parts of the pump in contact with the media. Any
    value(s) are acceptable for these codes.
    Certification does NOT include any accessories (foot valve, injection valve and/or
    tubing). Certification does NOT include the plate valve option for the Sigma/3.
    
    These pumps are approved for use with the following media at the maximum concentrations
    listed below. These products are evaluated by diluting the exposed water treatment
    chemical to its maximum use level (MUL), as defined in NSF/ANSI/CAN 60.
    ACH Aluminum chlorohydrate (40%)
    Aluminum sulfate (50%)
    Ammonium hydroxide (29%)
    Chlorine dioxide (2.0%)
    Ferric chloride (45%)
    Fluorosilicic acid (25%)
    Hydrochloric acid (33%)
    Liquid ammonium Sulfate (40%)
    Phosphoric acid (85%)
    Polyaluminum chloride (45%)
    Potassium permanganate (3%)
    Sodium bisulfite (44%)
    Sodium chlorite (25%)
    Sodium fluoride (4.0%)
    Sodium hydroxide (50%)
    Sodium hypochlorite (15%)
    Sodium permanganate (20%)
    Sulfuric acid (98%)
    Zinc orthophosphate (100%)
[2] XXXX - Pump version 

           Beta         - 0220, 0232, 0413, 0420, 0708, 0713, 1000, 1008, 1601, 

                          1602, 1604, 2001, 2002, 2504

           Concept Plus - 0308, 0215, 0704, 1000, 1002, 1601, 0309

           Delta        - 1020, 1608, 1612, 2508, 0730

           Gamma/L      - 232, 420, 713, 1000, 1005, 1008, 1601, 1602, 1605
, 0708, 0413, 
                          0220
           Gamma/X      - 2504, 1604, 0708, 1009, 0414, 0715, 0220, 0424, 0245, 2002, 1602
           Gamma/XL     - 0730, 1020, 1608, 1612, 2508
    $    - Liquid end version 
           0 - No bleed valve, no valve springs 
           2 - With bleed valve, no valve springs
    
    Any codes not specifically indicated in the trade name or listing notes represent
    features that do not affect the parts of the pump in contact with the media. Any
    value(s) are acceptable for these codes. 
    
    Certification does NOT include any accessories (foot valve, injection valve and/or
    tubing).
    These pumps are Certified for use with the following media at the maximum concentrations
    listed below. These products are evaluated by diluting the exposed water treatment
    chemical to its maximum use level (MUL), as defined in NSF/ANSI/CAN 60. 
    Ammonium hydroxide (29%)
    Liquid Ammonium sulfate (40%)
    Phosphoric acid (50%)
    Polyaluminum chloride (45%)
    Potassium permanganate (3%)
    Sodium fluoride (4.0%)
    Sodium hypochlorite (15%)
    Sodium Permanganate (20%)
[3] 3/8" x 1/4" - 1/2" x 3/8", 5/8", 1/2"
[4] Certified for use with the following media at the maximum concentrations listed below.
    These products are evaluated by diluting the exposed water treatment chemical to its
    maximum use level (MUL), as defined in NSF/ANSI Standard 60.
    
    TPV hose material:
    Aluminum Chloride (50%)
    Aluminum Sulfate (50%)
    Ammonia, aqueous (35%)
    Ammonium Hydroxide (29%)
    Ammonium Sulfate (45%)
    Calcium carbonate (25%)
    Calcium Chloride (30%)
    Calcium Hydroxide (10%)
    Calcium Hypochlorite (15%)
    Copper Sulfate (13%)
    Dipotassium Orthophosphate (50%)
    Disodium Orthophosphate (50%)
    Ferric Chloride (43%)
    Ferric Sulfate (5%)
    Ferrous Chloride (40%)
    Ferrous Sulfate (5%)
    Fluorosilicic acid (25%)
    Hydrochloric Acid (20%)
    Magnesium Sulfate (25%)
    Polyaluminum Chloride (45%)
    Polyaluminum Chlorosulfate (50%)
    Polyaluminum Hydroxychlorosulfate (75%)
    Polyaluminum Silicate Sulfate (66%)
    Polyaluminum Sulfate (50%)
    Potassium Carbonate (47%)
    Potassium Chloride (34%)
    Potassium hydroxide (10%)
    Potassium Permanganate (6%)
    Potassium Tripolyphosphate (100%)
    Sodium Acid Pyrophosphate (12%)
    Sodium Aluminate (50%)
    Sodium Ascorbate (60%)
    Sodium Bicarbonate (100%)
    Sodium Bisulfite (50%)
    Sodium Carbonate (7%)
    Sodium Chlorate (45%)
    Sodium Chloride (20%)
    Sodium Chlorite (7.5%)
    Sodium Fluoride (3%)
    Sodium Hydroxide (40%)
    Sodium Hypochlorite (12.2%)
    Sodium Metabisulfite (10%)
    Sodium Percarbonate (7%)
    Sodium Permanganate (6%)
    Sodium Polyphosphates (35%)
    Sodium Silicate (10%)
    Sodium Sulfite (10%)
    Sodium Trimetaphosphate (20%)
    Sodium Tripolyphosphate (15%)
    Tetrasodium Pyrophosphate (7%)
    Tricalcium Phosphate (70%)
    Zinc Chloride (80%)
    Zinc Orthophosphate (100%)
    Zinc Sulfate (36%)
    
    PUR hose material:
    Aluminum Chloride (50%)
    Aluminum Sulfate (50%)
    Ammonia, aqueous (35%)
    Ammonium Hydroxide (10%)
    Ammonium Sulfate (30%)
    Calcium carbonate (25%)
    Calcium Chloride (30%)
    Calcium Hydroxide (10%)
    Calcium Hypochlorite (15%)
    Copper Sulfate (13%)
    Dipotassium Orthophosphate (50%)
    Disodium Orthophosphate (50%)
    Ferric Chloride (43%)
    Ferric Sulfate (5%)
    Ferrous Chloride (40%)
    Ferrous Sulfate (5%)
    Fluorosilicic acid (25%)
    Magnesium Sulfate (25%)
    Poly (Diallyldimethylammonium Chloride)(pDADMAC) (50%)
    Poly Aluminum Chloride (100%)
    Polyacrylamide (2.5%)
    Polyaluminum Chloride (45%)
    Polyaluminum Chlorosulfate (50%)
    Polyaluminum Hydroxychlorosulfate (75%)
    Polyaluminum Silicate Sulfate (66%)
    Polyaluminum Sulfate (50%)
    Potassium Carbonate (47%)
    Potassium Chloride (34%)
    Potassium hydroxide (10%)
    Potassium Permanganate (6%)
    Potassium Tripolyphosphate (100%)
    Sodium Acid Pyrophosphate (12%)
    Sodium Aluminate (50%)
    Sodium Ascorbate (60%)
    Sodium Bicarbonate (100%)
    Sodium Bisulfite (50%)
    Sodium Carbonate (7%)
    Sodium Chlorate (45%)
    Sodium Chloride (20%)
    Sodium Chlorite (7.5%)
    Sodium Fluoride (3%)
    Sodium Metabisulfite (10%)
    Sodium Percarbonate (7%)
    Sodium Permanganate (6%)
    Sodium Polyphosphates (35%)
    Sodium Silicate (10%)
    Sodium Sulfite (10%)
    Sodium Trimetaphosphate (20%)
    Sodium Tripolyphosphate (15%)
    Tetrasodium Pyrophosphate (7%)
    Tricalcium Phosphate (70%)
    Zinc Chloride (80%)
    Zinc Orthophosphate (100%)
    Zinc Sulfate (36%)
    
    SEBS hose material:
    Acetic Acid (99%)
    Aluminum Chloride
    Aluminum Sulfate (50%)
    Ammonium Sulfate (30%)
    Calcium Chloride (30%)
    Citric Acid
    Ferric Chloride (43%)
    Ferrous Sulfate (5%)
    Fluoric Acid
    Hydrochloric Acid (38%)
    Hydrofluoric Acid (40-48%)
    Hydrogen Peroxide (90%)
    Magnesium Chloride (35%)
    Nitric Acid (60%)
    Phosphoric Acid (75%)
    Sodium Bicarbonate (7%)
    Sodium Hypochlorite (12%)
    Sulfuric Acid (30%)



 
Protec Arisawa Europe S.A. 
Aritz Bidea 67
48100 Mungia 
Spain 
34 9467 40312
Visit this company's website


Facility : Mungia, Spain

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Filtration Devices/Components[1] [2] [3] [4]
1HFF608D3-20 8" D. HOT MLTPL
BPV-16-C-D-E 16" D. HOT MLTPL
BPV-4-A-B-E 4" D. HOT MLTPL
BPV-8-C-D-E 8" D. HOT MLTPL
BPV-8-C-MCP-I 8" D. HOT MLTPL
BPV-C-D-E-K 11" D. HOT MLTPL
BPV-HU10255MI 11" D. HOT MLTPL
PA-8-C-D-K 8" D. HOT MLTPL
PRO 9-C-D-E-K 9" D. HOT MLTPL
PRO-11-C-D-E 11" D. HOT MLTPL
PRO-4-A-B-E 4" D. HOT MLTPL
PRO-6-C-D-E 6" D. HOT MLTPL
PRO-8-C-D-E-K 8" D. HOT MLTPL
PRO-8-C-MCP-I 8" D. HOT MLTPL
PRO-HU10255MI 11" D. HOT MLTPL
PRO-X-8-C-D-E-K 8" D. HOT MLTPL
PRO-X-8-D-TYPE-E 8" D. HOT MLTPL
Pall Xunc 8" D. HOT MLTPL
Ultipleat PA8040m 8" D. HOT MLTPL
Ultipleat PA8040s 8" D. HOT MLTPL
Ultipleat PA8060m 8" D. HOT MLTPL
Ultipleat PA8060s 8" D. HOT MLTPL
WAT-8-C-D-E 8" D. HOT MLTPL

[1] All PRO and BPV series models can have a suffix of a -1 up through a -8 including -1.5
    and -7.5.  All PA series models can have a suffix of 8 and 184, indicating the diameter
    of in inches and millimeters respectively.
    
    The following nomenclature is used based on model type, where the indicators equal the
    following:
    A - From 150 to 2000
    B - EP/SP
    C - From 50 to 2000
    D - EP/SP/MSP/MMSP
    E - 1/1.5/2/3/4/5/6/7/7.5/8/1E/1S/"Blank"
    K - 20/40/53/60/62/80/"Blank"
    I - 3x2/3x3/4x4
    X - UF/NF/CRF
[2] Models BPV-4-A-B-E, PRO-6-C-D-E, PRO-X-8-C-D-E-K, and PA-8-C-D-K are Certified for a
    minimum daily flow of 370,000 L/day.  All other models certified for a minimum permeate
    flow of 327,000 L/day.
[3] The Listed size is the nominal housing diameter.
[4] Only products bearing the NSF Mark are NSF Certified.



 
Protech Water India 
Shyam3, 78 Industrial Hub
Panchratna Estate, Changodar 
Ahmedabad, Gujarat 382213 
India 
91 982 0032292
Visit this company's website


Facility : # 1 China

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Reverse Osmosis Element[1] [2] [3]
BW-XFR-4040 4" x 40" CLD 23 MLTPL
BW-XFR400/34 8" x 40" CLD 23 MLTPL
NF90-4040 4" x 40" CLD 23 MLTPL
NF90400/34 8" x 40" CLD 23 MLTPL

[1] Certified for the following minimum daily flow rates:
    LP-4040 and ULP-4040 are certified for a minimum flow of 2600 gallons per day.
    ULP-8040 is certified for a minimum flow of 12000 gallons per day.
    BW-400 is certified for a minimum flow of 10500 gallons per day.
    BW-XFR400/34 is certified for a minimum flow of 9500 gallons per day.
    BW-XFR-4040 is certified for a minimum flow of 2300 gallons per day.
    NF90400/34 is certified for a minimum flow of 14500 gallons per day.
    NF90-4040 is certified for a minimum flow of 3500 gallons per day.
[2] LP-4040 and ULP-4040 require a 2 hour flush at a flow rate of 1.805 gallons per minute
    (gpm) with tap water.
    ULP-8040 requires a 2 hour flush at a flow rate of 8.33 gallons per minute (gpm) with
    tap water.
    BW-400 requires a 2 hour flush at a flow rate of 7.291 gallons per minute (gpm) with tap
    water.
    BW-XFR400/34 requires a 2 hour flush at a flow rate of 6.597gallons per minute (gpm)
    with tap water.
    BW-XFR-4040 requires a 2 hour flush at a flow rate of 1.597 gallons per minute (gpm)
    with tap water.
    NF90400/34 requires a 2 hour flush at a flow rate of 10.069 gallons per minute (gpm)
    with tap water.
    NF90-4040 requires a 2 hour flush at a flow rate of 2.431 gallons per minute (gpm) with
    tap water.
[3] Naming Convention:
    ULP - Ultra Low Pressure
    LP  - Low Pressure
    FR  - Fouling Resistance and can be used to High Salt water
    BW  - Bitter water, which can be used for bitter water



 
Pulsed Hydraulics, Inc. 
15 Oro Beach Drive
Oroville, WA 98844 
United States 
800-641-1726 
800-641-1726
Visit this company's website


Facility : Marion, OH

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Miscellaneous Process Devices/Components[1] [G]
Bubble Forming Plate DFP-8SS 8" x 5" CLD 23 SS

[1] Certified for use in tanks 50,000 gallons and greater.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



 
Purifics Water Inc. 
340 Sovereign Road
London, ON N6M 1A8 
Canada 
519-473-5788
Visit this company's website


Facility : Ontario, Canada

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Ultrafiltration Devices[1]
M16[2] CLD 23 MLTPL
M24[3] CLD 23 MLTPL
M36[4] CLD 23 MLTPL
M48[5] CLD 23 MLTPL
M54[6] CLD 23 MLTPL

[1] Only products bearing the NSF Mark on the product, product packaging, and/or
    documentation shipped with the product are Certified.
[2] Trade name M16 is certified for use in public water purification facilities at a minimum
    daily filtrate generation of 70,000 liters.
[3] Trade name M24 is certified for use in public water purification facilities at a minimum
    daily filtrate generation of 140,000 liters.
[4] Trade name M36 is certified for use in public water purification facilities at a minimum
    daily filtrate generation of 390,000 liters.
[5] Trade name M48 is certified for use in public water purification facilities at a minimum
    daily filtrate generation of 610,000 liters.
[6] Trade name M54 is certified for use in public water purification facilities at a minimum
    daily filtrate generation of 960,000 liters.



 
Qicheng (Jiangsu) Purification Technology Co., Ltd. 
Small and Medium Enterprise Park
East Xinggang Road, Jiangdu District 
Yangzhou, Jiangsu 225211 
China 
86 514 8036 0260


Facility : Jiangsu, China

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Reverse Osmosis Element
QC-FRHS-4040[1] 4" x 40" CLD 23 MLTPL
QC-FRHS-8040[1] 8" x 40" CLD 23 MLTPL
QC-LP-4040FR[1] 4" x 40" CLD 23 MLTPL
QC-LP-8040-365FR 8" x 40" CLD 23 MLTPL
QC-LP-8040-400FR[1] 8" x 40" CLD 23 MLTPL

[1] [1]Four inch diameter models are flushed at a flow rate of 7 gallons per minute for 2
    hours with de-ionized water.					
    Eight inch models are flushed at a flow rate of 12 gallons per minute for 2 hours with
    de-ionized water.	
    			
    Naming convention is as follows:
    QC   - the abbreviation of the company name.
    LP   - Low Pressure
    ULP  - Ultra Low Pressure
    XLP  - Extremely Low Pressure
    FR   - Fouling Resistance
    FRHS - Fouling Resistance and can be used to High Salt water
    QC-FRHS-4040 is certified for a minimum daily flow of 1,800 gallons per day.
    QC-LP-4040FR is certified for a minimum daily flow of 2,200 gallons per day.
    QC-ULP-4040 and QC-LP-4040 models are certified for a minimum daily flow of 2,400
    gallons per day.
    QC-FRHS-8040 is certified for a minimum daily flow of 7,300 gallons per day.
    QC-LP-8040-365FR is certified for a minimum daily flow of 9,000 gallons per day.
    QC-LP-8040-365, QC-LP-8040-400FR, and QC-XLP-8040-400 models are certified for a minimum
    daily flow of 9,500 gallons per day.
    QC-ULP-8040-400 is certified for a minimum daily flow of 10,000 gallons per day.
    QC-LP-8040-400 and QC-XLP-8040-440 models are certified for a minimum daily flow of
    10,500 gallons per day.
    QC-ULP-8040-440 is certified for a minimum daily flow of 11,000 gallons per day.
[2] QC   - the abbreviation of the company name.
    LP   - Low Pressure
    ULP  - Ultra Low Pressure
    XLP  - Extremely Low Pressure
    FR   - Fouling Resistance
    FRHS - Fouling Resistance and can be used to High Salt water
    25x21 inch models are flushed at a flow rate of 2 gallons per minute for 2 hours with
    de-ionized water.
    25x40 inch models are flushed at a flow rate of 3 gallons per minute for 2 hours with
    de-ionized water.
    40x21 inch models are flushed at a flow rate of 4 gallons per minute for 2 hours with
    de-ionized water.
    25x21 inch models are certified for a minimum daily flow of 300 gallons per day.
    25x40 inch models are certified for a minimum daily flow of 750 gallons per day.
    40x21 inch models are certified for a minimum daily flow of 1,000 gallons per day.



 
R & H Import Inc. 
Unit 14 – 2166 Notre Dame Ave
Winnipeg, MB R3H 0K2 
Canada 
204-229-1566
Visit this company's website


Facility : Guangdong, China

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Fittings [G]
R&H Brass Expansion Fitting[1] 1/2" - 2" C. HOT BRASS

[1] R&H Expansion Fitting uses alloy C69300.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



 
Rammy Trade Solutions Pvt Ltd 
B-3/102, Mohan Regency, Adharwadi
Kalyan West / Maharashtra 421301 
Kalyan West, MM 421301 
India 
919 867 626 346


Facility : # 1 China

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Filtration Devices/Components[1] [2]
OTAYO L-4021 4" x 21" CLD 23 MLTPL
OTAYO L-4040 4" x 40" CLD 23 MLTPL
OTAYO L-8040 -400 8" x 40" CLD 23 MLTPL

[1] [1] Products have the following minimum daily flow:
    OTAYO L-4021 - 850 gallons
    OTAYO L-4040 - 1900 gallons
    OTAYO L-8040 - 400 - 10000 gallons
    
[2] Product requires a 1 hour deionized water flush at various flow rates and pressures
    depending on the model:	
    OTAYO L-4021 - 73.78 gpm at 150 PSI		
    OTAYO L-4040 - 8.80 gpm at 150 PSI		
    OTAYO L-8040 - 400 - 48.61 gpm at 150 PSI		
    



 
Red Valve Company, Inc. / Tideflex Technologies 
750 Holiday Drive
Pittsburgh, PA 15220 
United States 
412-279-0044


Facility : Gastonia, NC

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Valves
Tideflex Series 35[1] 2" - 96" CLD 23 MLTPL
Tideflex Series 35-1[1] 2" - 96" CLD 23 MLTPL
Tideflex Series 37[1] 2" - 96" CLD 23 MLTPL
Tideflex Series 37G[1] 2" - 96" CLD 23 MLTPL
Tideflex Series TF-1[1] 2" - 96" CLD 23 MLTPL
Tideflex Series TF-2[1] 2" - 96" CLD 23 MLTPL
Waterflex Series WF-2[1] 2" - 96" CLD 23 MLTPL
Waterflex Series WF-3[1] 2" - 96" CLD 23 MLTPL

[1] Valves are Certified only for use in tanks that are 2,000 gallons or greater.  These
    valves have not been reviewed, evaluated or Certified for use in the transmission line.

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.


 
Refractron Technologies Corporation 
5750 Stuart Avenue
Newark, NY 14513 
United States 
315-331-6222
Visit this company's website


Facility : Newark, NY

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Miscellaneous Process Devices/Components [G]
AF30, Dome 178-38 [1] CLD 23 MLTPL
AF30, Tube, 64-44-719 [1] CLD 23 MLTPL
AF50, Dome 178-38 [1] CLD 23 MLTPL
AF90, Disc, 233-19 [1] CLD 23 MLTPL
AF90, Disc, 235-19 [1] CLD 23 MLTPL
AF90, Dome 178-38 [1] CLD 23 MLTPL

[1] Certified for a maximum of one diffuser per 100 gallons of tank volume.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



Reliance Worldwide Corporation (RWC) 
2300 Defoor Hills Road Northwest
Atlanta, GA 30318 
United States 
877-700-4242 
Visit this company's website


Facility : Cullman, AL

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Gauges* [1] [G]
Push-Fit tee with Pressure Gauge (UR24436) 1/2" x 1/2" x 1/2" C. HOT MLTPL
Push-Fit tee with Pressure Gauge (UR24438) 3/4" x 3/4" x 1/2" C. HOT MLTPL
Push-Fit tee with Pressure Gauge (UR24440) 1" x 1" x 3/4" C. HOT MLTPL
Push-Fit tee with Temperature Gauge (UR24437) 1/2" x 1/2" x 1/2" C. HOT MLTPL
Push-Fit tee with Temperature Gauge (UR24439) 3/4" x 3/4" x 1/2" C. HOT MLTPL
Push-Fit tee with Temperature Gauge (UR24441) 1" x 1" x 3/4" C. HOT MLTPL

* Model numbers listed are base part numbers. Saleable items may include an additional 1-8
  alpha/numeric characters after the base part number that indicated specific packaging
  configurations only.
[1] Replacement gauges are available for these 						
    SharkBite Max Replacement Temperature Gauge Assembly 24443 (1/2")					
    SharkBite Max Replacement Pressure Gauge Assembly 24442 (1/2")
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



 
Rifeng Enterprise (Foshan) Co., Ltd. 
No.1 Rifeng Road
Foshan, Guangdong 528317 
China 
86 757 8230 1768


Facility : Foshan, China

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Fittings [G]
RIFENG PF6 1/2" - 2" C. HOT BRASS
RIFENG PF6m[1] 1/2" - 2" C. HOT BRASS

[1] RIFENG PF6m uses alloy C69300.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

Valves [G]
Rifeng Low Lead PEX Ball Valve 1/2" - 1 1/4" C. HOT MLTPL
RIFENG PEX Ball Valve (PF5m-Q)[2] 1/2" - 1 1/4" C. HOT MLTPL
RIFENG PEX Ball Valve (PF5-Q) 1/2" - 1 1/4" C. HOT MLTPL

[2] For trade names, the use of "m" in trade name indicates use of C69300 alloy.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



 
Riifo North America 
4737 Smokey Bear Lane
Columbia Falls, MT 59912 
United States 
406-250-4412


Facility : # 1 China

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Fittings [G]
RIIFO PF6 1/2" - 2" C. HOT BRASS
RIIFO PF6m[1] 1/2" - 2" C. HOT BRASS

[1] RIFENG PF6m uses alloy C69300.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

Pipe[G]
RIIFO PP-RCT SDR11 Pipe 20 mm - 315 mm C. HOT PP
RIIFO PP-RCT SDR6 Pipe 20 mm - 315 mm C. HOT PP
RIIFO PP-RCT SDR7.4 Pipe 20 mm - 315 mm C. HOT PP
RIIFO PP-RCT SDR9 Pipe 20 mm - 315 mm C. HOT PP

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

Valves
RIIFO Low Lead PEX Ball Valve[G] 1/2" - 1 1/4" C. HOT MLTPL
RIIFO PEX Ball Valve (PF5-Q)[G] 1/2" - 1 1/4" C. HOT MLTPL
RIIFO PEX Ball Valve (PF5m-Q)[2] [G] 1/2" - 1 1/4" C. HOT MLTPL
Riifo Low Lead Full Port Brass Ball Valve with Drain, Solder[G] 1/2" - 1" C. HOT MLTPL
Riifo Low Lead Full Port Brass Ball Valve, FIP Threaded[G] 1/2" - 2" C. HOT MLTPL
Riifo Low Lead Full Port Brass Ball Valve, Solder[G] 1/2" - 2" C. HOT MLTPL
Riifo Low Lead PEX Ball Valve[G] 1/2" - 1 1/4" C. HOT MLTPL
Riifo Low Lead Standard Port Brass Ball Valve, FIP Threaded[G] 1/2" - 2" C. HOT MLTPL
Riifo Low Lead Standard Port Brass Ball Valve, Solder[G] 1/2" - 2" C. HOT MLTPL

[2] For trade names, the use of "m" in trade name indicates use of C69300 alloy.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



 
Romac Industries, Inc. 
21919 20th Avenue S.E.
Suite 100 
Bothell, WA 98021-4404 
United States 
425-951-6200
Visit this company's website


Facility : Dallas, NC

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Tapping Sleeves/Service Saddles [G]
101N-H Service Saddle with Nylon coating for HDPE Pipe[1] >= 2" CLD 23 MLTPL
202N-H Service Saddle with Nylon coating for HDPE Pipe[1] >= 2" CLD 23 MLTPL
305-H Stainless Steel Service Saddle for HDPE Pipe[1] >= 10" CLD 23 MLTPL
306-H Stainless Steel Service Saddle for HDPE Pipe[1] >= 2" CLD 23 MLTPL
FTS419 Fabricated Steel Tapping Sleeve >= 4" CLD 23 MLTPL
FTS419-MJ Fabricated Steel Tapping Sleeve >= 4" CLD 23 MLTPL
FTS419-T Fabricated Steel Tapping Saddle >= 4" CLD 23 MLTPL
FTS420 Fabricated Steel Tapping Sleeve >= 3" CLD 23 MLTPL
FTS420 Fabricated Steel Tapping Sleeve >= 6" CLD 23 MLTPL
FTS420-MJ Fabricated Steel Tapping Sleeve >= 6" CLD 23 MLTPL
FTS420-T Fabricated Steel Tapping Saddle >= 6" CLD 23 MLTPL
FTS421 Fabricated Steel Tapping Sleeve for High Pressure Applications >= 4" CLD 23 MLTPL
FTS421-T Fabricated Steel Tapping Saddle for High Pressure Applications >= 4" CLD 23 MLTPL
FTS422 Fabricated Steel Tapping Sleeve for High Pressure Applications >= 4" CLD 23 MLTPL
FTS422-T Fabricated Steel Tapping Saddle for High Pressure Applications >= 4" CLD 23 MLTPL
FTS423-H Fabricated Steel Tapping Sleeve for HDPE >= 4" CLD 23 MLTPL
FTS423-MJ Fabricated Steel Repair Sleeve for HDPE >= 4" CLD 23 MLTPL
FTS423-T Fabricated Steel Repair Sleeve for HDPE >= 4" CLD 23 MLTPL
FTS425 Fabricated Steel Tapping Split Sleeve >= 4" CLD 23 MLTPL
FTS425II Fabricated Steel Tapping Split Sleeve for High Pressure Applications >= 4" CLD 23 MLTPL
FTS435 Fabricated Steel Tapping Sleeve for Concrete Steel Cylinder Pipe >= 12" CLD 23 MLTPL
FTS445 Fabricated Steel Tapping Sleeve for Weld-on Outlets >= 4" CLD 23 MLTPL
FTS445-T Fabricated Steel Tapped Sleeve for Weld-on Outlets >= 4" CLD 23 MLTPL
FTS465 Fabricated Steel Tapping Sleeve >= 4" CLD 23 MLTPL
FTS465-T Fabricated Steel Tapping Saddle >= 4" CLD 23 MLTPL
SST-H Stainless Steel Tapping Sleeve for HDPE >= 4" CLD 23 MLTPL
STS419 Fabricated Steel Tapping Sleeve >= 4" CLD 23 MLTPL
STS419-MJ Fabricated Steel Tapping Sleeve >= 4" CLD 23 MLTPL
STS419-T Fabricated Steel Tapping Sleeve >= 4" CLD 23 MLTPL
STS421 Stainless Steel Tapping Sleeve for High Pressure Applications >= 6" CLD 23 MLTPL
STS421-T Stainless Steel Tapping Saddle for High Pressure Applications >= 6" CLD 23 MLTPL
STS422 Stainless Steel Tapping Sleeve for High Pressure Applications >= 4" CLD 23 MLTPL
STS422-T Stainless Steel Tapping Saddle for High Pressure Applications >= 4" CLD 23 MLTPL
STS423 Stainless Steel Tapping Sleeve for HDPE >= 4" CLD 23 MLTPL
STS445 Stainless Steel Tapping Sleeve for Weld-on Outlets >= 4" CLD 23 MLTPL
STS445-T Stainless Steel Tapping Saddle for Weld-on Outlets >= 4" CLD 23 MLTPL

[1] The service saddles accommodate from 1 1/2" - 30" diameter pipe and have from 1/2" - 3"
    outlets, depending on model. 
    
[2] The trade name "202NU Service Saddle with Nylon coating" is also identified as "202 NU -
    OD Size x Tap Size & Type OD RANGE Min Pipe Size - Max Pipe Size" on product labels.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



Facility : Fort Worth, TX

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Tapping Sleeves/Service Saddles[1] [G]
FTS419 Fabricated Steel Tapping Sleeve >= 4" CLD 23 MLTPL
FTS419-MJ Fabricated Steel Tapping Sleeve >= 4" CLD 23 MLTPL
FTS419-T Fabricated Steel Tapping Saddle >= 4" CLD 23 MLTPL
FTS420 Fabricated Steel Tapping Sleeve >= 3" CLD 23 MLTPL
FTS420-MJ Fabricated Steel Tapping Sleeve >= 6" CLD 23 MLTPL
FTS420-T Fabricated Steel Tapping Saddle >= 6" CLD 23 MLTPL
FTS421 Fabricated Steel Tapping Sleeve for High Pressure Applications >= 6" CLD 23 MLTPL
FTS421-T Fabricated Steel Tapping Saddle for High Pressure Applications >= 6" CLD 23 MLTPL
FTS422 Fabricated Steel Tapping Sleeve for High Pressure Applications >= 4" CLD 23 MLTPL
FTS422-T Fabricated Steel Tapping Saddle for High Pressure Applications >= 4" CLD 23 MLTPL
FTS423-H Fabricated Steel Tapping Sleeve for HDPE >= 4" CLD 23 MLTPL
FTS423-MJ Fabricated Steel Repair Sleeve for HDPE >= 4" CLD 23 MLTPL
FTS423-T Fabricated Steel Repair Sleeve with Tapped Outlet for HDPE >= 4" CLD 23 MLTPL
FTS425 Fabricated Steel Tapping Split Sleeve >= 4" CLD 23 MLTPL
FTS425II Fabricated Steel Tapping Split Sleeve for High Pressure Applications >= 4" CLD 23 MLTPL
FTS435 Fabricated Steel Tapping Sleeve for Concrete Steel Cylinder Pipe >= 12" CLD 23 MLTPL
FTS445 Fabricated Steel Tapping Sleeve for Weld-on Outlets >= 4" CLD 23 MLTPL
FTS445-T Fabricated Steel Tapped Sleeve for Weld-on Outlets >= 4" CLD 23 MLTPL
FTS465 Fabricated Steel Tapping Sleeve >= 4" CLD 23 MLTPL
FTS465-T Fabricated Steel Tapping Saddle >= 4" CLD 23 MLTPL
SST-H Stainless Steel Tapping Sleeve for HDPE >= 4" CLD 23 MLTPL
STS419 Fabricated Steel Tapping Sleeve >= 4" CLD 23 MLTPL
STS419-MJ Fabricated Steel Tapping Sleeve >= 4" CLD 23 MLTPL
STS419-T Fabricated Steel Tapping Sleeve >= 4" CLD 23 MLTPL
STS421 Stainless Steel Tapping Sleeve for High Pressure Applications >= 6" CLD 23 MLTPL
STS421-T Stainless Steel Tapping Saddle for High Pressure Applications >= 6" CLD 23 MLTPL
STS422 Stainless Steel Tapping Sleeve for High Pressure Applications >= 4" CLD 23 MLTPL
STS422-T Stainless Steel Tapping Saddle for High Pressure Applications >= 4" CLD 23 MLTPL
STS423 Stainless Steel Tapping Sleeve for HDPE >= 4" CLD 23 MLTPL
STS445 Stainless Steel Tapping Sleeve for Weld-on Outlets >= 4" CLD 23 MLTPL
STS445-T Stainless Steel Tapping Saddle for Weld-on Outlets >= 4" CLD 23 MLTPL

[1] These tapping sleeves can accommodate from 4" - 96" diameter pipe and a 3" - 42" branch
    outlet.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



Facility : Bothell, WA

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Tapping Sleeves/Service Saddles [G]
101N-H Service Saddle with Nylon coating for HDPE pipe[1] >= 2" CLD 23 MLTPL
202N-H Service Saddle with Nylon coating for HDPE pipe[1] >= 2" CLD 23 MLTPL
305-H Stainless Steel Service Saddle for HDPE Pipe[1] >= 10" CLD 23 MLTPL
306-H Stainless Steel Service Saddle for HDPE Pipe[1] >= 2" CLD 23 MLTPL
FTS419 Fabricated Steel Tapping Sleeve >= 4" CLD 23 MLTPL
FTS419-MJ Fabricated Steel Tapping Sleeve >= 4" CLD 23 MLTPL
FTS419-T Fabricated Steel Tapping Saddle >= 4" CLD 23 MLTPL
FTS420 Fabricated Steel Tapping Sleeve >= 6" CLD 23 MLTPL
FTS420-MJ Fabricated Steel Tapping Sleeve >= 6" CLD 23 MLTPL
FTS420-T Fabricated Steel Tapping Saddle >= 6" CLD 23 MLTPL
FTS421 Fabricated Steel Tapping Sleeve for High Pressure Applications >= 4" CLD 23 MLTPL
FTS421-T Fabricated Steel Tapping Saddle for High Pressure Applications >= 4" CLD 23 MLTPL
FTS422 Fabricated Steel Tapping Sleeve for High Pressure Applications >= 4" CLD 23 MLTPL
FTS422-T Fabricated Steel Tapping Saddle for High Pressure Applications >= 4" CLD 23 MLTPL
FTS423-H Fabricated Steel Tapping Sleeve for HDPE >= 4" CLD 23 MLTPL
FTS423-MJ Fabricated Steel Repair Sleeve for HDPE >= 4" CLD 23 MLTPL
FTS423-T Fabricated Steel Repair Sleeve for HDPE >= 4" CLD 23 MLTPL
FTS425 Fabricated Steel Tapping Split Sleeve >= 4" CLD 23 MLTPL
FTS425II Fabricated Steel Tapping Split Sleeve for High Pressure Applications >= 4" CLD 23 MLTPL
FTS435 Fabricated Steel Tapping Sleeve for Concrete Steel Cylinder Pipe >= 12" CLD 23 MLTPL
FTS445 Fabricated Steel Tapping Sleeve for Weld-on Outlets >= 4" CLD 23 MLTPL
FTS445-T Fabricated Steel Tapped Sleeve for Weld-on Outlets >= 4" CLD 23 MLTPL
FTS465 Fabricated Steel Tapping Sleeve >= 4" CLD 23 MLTPL
FTS465-T Fabricated Steel Tapping Saddle >= 4" CLD 23 MLTPL
SST-H Stainless Steel Tapping Sleeve for HDPE >= 4" CLD 23 MLTPL
STS419 Fabricated Steel Tapping Sleeve >= 4" CLD 23 MLTPL
STS419-MJ Fabricated Steel Tapping Sleeve >= 4" CLD 23 MLTPL
STS419-T Fabricated Steel Tapping Sleeve >= 4" CLD 23 MLTPL
STS421 Stainless Steel Tapping Sleeve for High Pressure Applications >= 6" CLD 23 MLTPL
STS421-T Stainless Steel Tapping Saddle for High Pressure Applications >= 6" CLD 23 MLTPL
STS422 Stainless Steel Tapping Sleeve for High Pressure Applications >= 4" CLD 23 MLTPL
STS422-T Stainless Steel Tapping Saddle for High Pressure Applications >= 4" CLD 23 MLTPL
STS423 Stainless Steel Tapping Sleeve for HDPE >= 4" CLD 23 MLTPL
STS445 Stainless Steel Tapping Sleeve for Weld-on Outlets >= 4" CLD 23 MLTPL
STS445-T Stainless Steel Tapping Saddle for Weld-on Outlets >= 4" CLD 23 MLTPL

[1] The service saddles accommodate from 1 1/2" - 30" diameter pipe and have from 1/2" - 3"
    outlets, depending on model.
[2] The trade name "202NU Service Saddle with Nylon coating" is also identified as "202 NU -
    OD Size x Tap Size & Type OD RANGE Min Pipe Size - Max Pipe Size" on product labels.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



 
Rosedale Products, Inc. 
P.O. Box 1085
Ann Arbor, MI 48106 
United States 
800-821-5373 
734-665-8201


Facility : # 1 USA

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Filtration Devices/Components
(X)-(Y)-(2)-(3)-150-(4)-(5)-(6)[1] 8" CLD 23 MLTPL
D-(1)-(2)-(3)-(4)-(5)-(6)-(7)-(8)-(9)-(10)-*(11)[2] 8" CLD 23 MLTPL
FT-(1)-(2)-(3)-(4)-(5)-(6)-(7)-(8)-(9)-(10)-*(11)[2] 8" CLD 23 MLTPL
H-(1)-(2)-(3)-(4)-(5)-(6)-(7)-(8)-(9)-(10)-*(11)[2] 8" CLD 23 MLTPL
HF-(1)-(2)-(3)-(4)-(5)-(6)-(7)-(8)-(9)-(10)-*(11)[2] 8" CLD 23 MLTPL
LCO 8-(1)-(2)-(3)-125-(4)-(5)-(6)[1] 8" CLD 23 MLTPL
LCO-(1)-(2)-(3)-(4)-(5)-(6)-(7)-(8)-(9)-(10)-*(11)[2] 8" CLD 23 MLTPL
NCO 8-(1)-(2)-(3)-150-(4)-(5)-(6)[1] 8" CLD 23 MLTPL

[1] NCO 8-(1)-(2)-(3)-150-(4)-(5)-(6)
    (X)-(Y)-(2)-(3)-150-(4)-(5)-(6)
    LCO 8-(1)-(2)-(3)-125-(4)-(5)-(6)
    Are denoted as follows:
    (X) LCO 8135
        LCO 8135 Convertible
        LCO 8640 Variable
        NCO 8135
        NCO 8135 Convertible
        NCO 8640 Variable
    (Y) 8640   - 6 cartridges
    			 18435  - 4 Cartridges
        24735  - 7 Cartridges
        361835 - 18 Cartridges
        422135 - 24 Cartridges
        482935 - 29 Cartridges
    (1) Basket size
        15 - 15" (NCO only) 
        30 – 30" (NCO) 
        No symbol (NCO8135) 
    (2) Pipe size, NPT and flanged:
        3/4P - 3/4" female NPT
        1P - 1" female NPT
        1 1/4P - 1 1/4" female NPT
        1 1/2P - 1 1/2" female NPT 
        2P     - 2" female NPT
        3P     - 3" female NPT
        3/4F   - 3/4" 150 class ANSI flange
        1F     - 1" 150 class ANSI flange
        1 1/4F - 1 1/4" 150 class ANSI flange
        1 1/2F - 1 1/2" 150 class ANSI flange
        2F     - 2" 150 class ANSI flange
        3F     - 3" 150 class ANSI flange
        4F     - 4" 150 class ANSI flange
        6F     - 6" 150 class ANSI flange 
    (3) Outlet style 
        * - Side/bottom unistyle (LCO or NCO) 
        1 - Bottom 
    (4) Housing material
        S - 304 Stainless Steel 
    (5) Cover seal 
        E - EPDM 
    (6) Basket type 
        PB    - Filter bag basket (LCO, NCO, or NLCO) 
        700   - 700 Cartridge 
        700PB - Convertible (LCO8135 or NCO8135)
    			 DOE   - Double open end
[2] FT-(1)-(2)-(3)-(4)-(5)-(6)-(7)-(8)-(9)-(10)-*(11)
    D-(1)-(2)-(3)-(4)-(5)-(6)-(7)-(8)-(9)-(10)-*(11)
    H-(1)-(2)-(3)-(4)-(5)-(6)-(7)-(8)-(9)-(10)-*(11)   
    HF-(1)-(2)-(3)-(4)-(5)-(6)-(7)-(8)-(9)-(10)-*(11) 
    LCO-(1)-(2)-(3)-(4)-(5)-(6)-(7)-(8)-(9)-(10)-*(11)
    Are denoted as follows:
    (1) Model: 4, 6, 8, 10, 12, 14, 16, 18, 22, 24, 30,36, 42, 48
    (2) # Carts: 1, 3, 4, 5, 6, 7, 8, 12, 19, 20, 22, 27, 31, 40, 52, 82, 116, 158, 205
    (3) Length 6, 10, 12, 15, 20, 30, 35, 39, 40, 60, 80
    (4) Nozzle: ½, ¾, 1, 1 ¼, 1 ½, 1 ¾, 2, 3, 4, 6, 8, 10, 12, 14, 16
    (5) Connector: F, NPT, WN, LWN
    (6) Style: 1, 2, 3, 4, U
    (7) PSI: 100, 125, 150, 200, 300
    (8) MOC: 304, 304L, 316, 316L
    (9) Gasket: FG (epdm)
    (10) Cart Post or Cart Style: VP, TP, DOE, 222, 226, R, S
    *(11) ASME Code: C

Microfiltration Devices
Model 8-(1)-(2)-(3)-(4)-(5)- FG-S-PB-(6)-C[3] [4] 2" - 12" CLD 23 MLTPL
Model 8-(1)-(2)-(3)-(4)-(5)-E-S-PB-D-C[3] [5] 3/4" - 6" CLD 23 MLTPL

[3] Certified for a minimum flow of 25 gallons per day.
[4] The numbers in parentheses represent the following for
    8-(1)-(2)-(3)-(4)-(5)-FG-S-PB-(6)-C:
    (1) Housing Size:
        15" - 15"
        30" – 30"
    (2) Pipe size, NPT and Flanged:
        3/4P   - 3/4" female NPT
        1P     - 1" female NPT
        1-1/4P - 1 1/4" female NPT
        1-1/2P - 1 1/2" female NPT
        2P     - 2" female NPT
        3P     - 3" female NPT
        3/4F   - 3/4" 150 class ANSI flange
        1F     - 1" 150 class ANSI flange
        1-1/4F - 1 1/4" 150 class ANSI flange
        1-1/2F - 1 1/2" 150 class ANSI flange
        2F     - 2" 150 class ANSI flange
        3F     - 3" 150 class ANSI flange
        4F     - 4" 150 class ANSI flange
        6F     - 6" 150 class ANSI flange
    (3) Outlet Style:
        1 - Bottom
        2 - Side
        3 - Bottom Elbow
    (4) Pressure Rating:
        150 - 150 psi (NPT or flanged)
        300 - 300 psi (NPT or flanged)
    (5) Housing Material:
        S    - 304 stainless steel
        S316 - 316 stainless steel
    (6) Optional Displacer
        D – Displacer present
    STANDARD CODES:
        FG - Cover seal
        S  - Basket seal is required
        PB - Basket type (filter basket, 964 perforations)
        C  - ASME code stamp
[5] The numbers in parentheses represent the following for Model
    8-(1)-(2)-(3)-(4)-(5)-E-S-PB-D-C:
    (1) Housing Style:
        No Symbol - Standard (std)
        SLP       - Standard low profile
        QII       - Quick access cover
        HLP       - Hinged low profile
    (2) Model:
        16 - Model 16
        18 - Model 18
        22 - Model 22
        24 - Model 24
        30 - Model 30
        36 - Model 36
        42 - Model 42
        48 - Model 48
    (3) Basket Depth:
        15 - 15"
        30 - 30"
    (4) Pipe Size (Flanged):
        2F  - 2"
        3F  - 3"
        4F  - 4"
        6F  - 6"
        8F  - 8"
        10F - 10"
        12F - 12"
    (5) Outlet Style:
        1 - In-line, bottom
        2 - Side inlet/outlet
        3 - Side inlet/outlet/same side
    (6) Optional Displacer
        D – Displacer present
    STANDARD CODES:
        E  - Cover seal
        S  - Basket seal is required
        PB - Basket type (filter basket, 964 perforations)
        C  - ASME code stamp



Facility : # 2 USA

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Filtration Devices/Components[1]
GD-PO-(X)–(Y)–(Z)–(1)–(2)[2] 0.98 L CLD 23 MLTPL
HFR - (X)-(W)-(Y)-(Z)-(V)-(1)-(2)[3] 26.67 L CLD 23 MLTPL
HFS-P - (X)-(W)-(Y)-(Z)-(V)-(1)-(2)[3] 20.55 L CLD 23 MLTPL
HL-PO-(X)–(Y)–(Z)–(1)–(2)[4] 0.98 L CLD 23 MLTPL
PMO - (X)-(Y)-(Z)-(1)-(2)[5] 0.98 L CLD 23 MLTPL
PO-(X)–(Y)-(Z)–(1)–(2)[6] 0.98 L CLD 23 MLTPL
POMF-(X)–(Y)–(Z)–(1)–(2)[7] 0.98 L CLD 23 MLTPL

[1] Certified for minimum flow of 25 gallons per day.
[2] GD-PO - Graded Density - Graded Density Polypropylene
[3] HFR = High Flow Rosedale		
           HFS-P = High Flow Standard		
    		
               (X) Micron Rating		
                HFR - 1, 5, 10, 25, 50, 100, 200		
                HFS-P - 1, 5, 10, 25, 50, 100, 200		
    		
               (W) Material 		
                HFR - Polypropylene		
                HFS-P - Pplypropylene		
    		
                (Y) Finish Type / Cover		
                HFR - Polypropylene Cover (PMO)		
                 HFS-P - Polypropylene Cover (PMO)		
    		
                (V ) Bag Length		
                  40 - 40" nominal		
                  60 - 60" nominal		
    		
                (1) Ring Type:		
                 SS - 304 Stainless Steel Ring (HFS-P only)		
                 RPO - Molded Polypropylene Ring (HFR only)		
    		
                  (2)  Construction		
                   SEWN - No symbol
[4] HL-PO - High Life - High Life Polypropylene
[5] PMO - Single Layer Bag - Polypropylene Monofilament Mesh
[6] PO - Single Layer Standard Bag – Polypropylene Felt
[7] POMF - High Efficiency Filter Bags – Polypropylene Micro Fiber
    
    (X)  Micron Rating
         PO    - 1/2, 1, 5, 10, 25, 50, 100, 200
         POMF  - 1, 3, 8, 19
         GD-PO - 523, 525, 527, 529
         HL-PO - 323, 325, 327, 329
         PMO   -  100, 150, 200, 250, 300, 400, 600, 800
    (Y)  Finish Type/Cover 
         PO    - P – Plain Finish or G – Glazed Finish (singed)
         POMF  - Polylpropylene Cover
         GD-PO - Polypropylene Cover
         HL-PO - Polypropylene Cover
         PMO  -  Polypropylene Microfilament
    
    (Z)  Bag Size (Inches) 
         (1)  - 7.2 x 16 (PO, PMO, POMF, GD-PO and HL-PO)
         (2)  - 7.2 x 32 (PO, PMO, POMF, GD-PO and HL-PO)
         (3)  - 4.3 x 8 (PO, PMO, POMF)
         (4)  - 4.3 x 12 (PO, PMO, POMF)
         (7)  - 5.7 x 15 (PO, PMO, POMF)
         (8)  - 5.7 x 21 (PO, PMO, POMF)
         (9)  - 5.7 x 32 (PO, PMO, POMF)
         (12) - 8.4 x 34 (PO, PMO)
    
    (1)	Ring Type:  
    SS  - 304 Stainless Steel Ring
    POL - Molded Polypropylene Ring
    RPO - Molded Polypropylene Ring
    
    (2)	Construction
    WE   - Welded Construction (PO only)
    SEWN - No Symbol (All)



Facility : Houston, TX

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Filtration Devices/Components
DP-600-PPXXYZ-Q1[1] 6" CLD 23 MLTPL
DP-601-PPXXYZ-Q1[1] 6" CLD 23 MLTPL
DP-603-PPXXYZ-Q1[1] 6" CLD 23 MLTPL
DP-605-PPXXYZ-Q1[1] 6" CLD 23 MLTPL
DP-607-PPXXYZ-Q1[1] 6" CLD 23 MLTPL
DP-608-PPXXYZ-Q1[1] 6" CLD 23 MLTPL
DP-609-PPXXYZ-Q1[1] 6" CLD 23 MLTPL
DP-610-PPXXYZ-Q1[1] 6" CLD 23 MLTPL
DP-611-PPXXYZ-Q1[1] 6" CLD 23 MLTPL
DPU-600-PPXXYZ-Q1[1] 6" CLD 23 MLTPL
DPU-601-PPXXYZ-Q1[1] 6" CLD 23 MLTPL
DPU-603-PPXXYZ-Q1[1] 6" CLD 23 MLTPL
DPU-605-PPXXYZ-Q1[1] 6" CLD 23 MLTPL
DPU-607-PPXXYZ-Q1[1] 6" CLD 23 MLTPL
DPU-608-PPXXYZ-Q1[1] 6" CLD 23 MLTPL
DPU-609-PPXXYZ-Q1[1] 6" CLD 23 MLTPL
DPU-610-PPXXYZ-Q1[1] 6" CLD 23 MLTPL
DPU-611-PPXXYZ-Q1[1] 6" CLD 23 MLTPL
PSS-740-P356[2] 7" x 36" CLD 23 MLTPL
PSS-741-P356[2] 7" x 36" CLD 23 MLTPL
PSS-743-P356[2] 7" x 36" CLD 23 MLTPL
PSS-745-P356[2] 7" x 36" CLD 23 MLTPL
PSS-747-P356[2] 7" x 36" CLD 23 MLTPL
PSS-748-P356[2] 7" x 36" CLD 23 MLTPL
PSS-749-P356[2] 7" x 36" CLD 23 MLTPL

[1] XX - Filter Length Code
    20 - Filter Length
    26 - Filter Length 
    40 - Filter Length
    60 - Filter Length
    
    Y - Top End Cap Code
    P - High Flow Cap
    1 - Bag Filter Cap
    F - Flare Cap
    Z - O-ring Seal Code 
    
    B - Buna N
    E - EPDM
    S - Silicone
    U - Santoprene					
    					
    20" models (DPU-6##-PP20YZ-Q1, DP-6##-PP20YZ-Q1 ) are certified for a minimum daily
    filtrate generation of 4,750 gallons.						
    26" models (DPU-6##-PP26YZ-Q1, DP-6##-PP26YZ-Q1) are certified for a minimum daily
    filtrate generation of 6,175 gallons.						
    40" models (DPU-6##-PP40YZ-Q1, DP-6##-PP40YZ-Q1) are certified for a minimum daily
    filtrate generation of 9,500 gallons.						
    60" models (DPU-6##-PP60YZ-Q1, DP-6##-PP60YZ-Q1) are certified for a minimum daily
    filtrate generation of 14,250 gallons.						
    
[2] Certified for minimum flow of 25 gallons per day.

Microfiltration Devices
GLR-PO-825-2 [2] CLD 23 MLTPL
PS-520-PPP-241 [2] CLD 23 MLTPL
PS-740-PPP-356 7" x 36"[2] CLD 23 MLTPL

[2] Certified for minimum flow of 25 gallons per day.



 
Rosemount Tank Radar AB 
Layoutvägen 1, 435 33
Mölnlycke, 435 33 
Sweden 
49 2303 928521


Facility : Nakornrachasima, Thailand

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Transmitters/Gauges[1] [2] [G]
Rosemont 1208xx Level and Flow Transmitter N/A C. HOT PVDF

[1] EPDM material was not evaluated as it is not sold with this unit.
[2] The 1208 model is designed to be available in 8 different model code versions:
    1208AG, 1208AGB, 1208AN, 1208ANB, 1208CG, 1208CGB, 1208CN and 1208CNB.
    A=IO-Link, C=Hart, G=G-Thread, N=NPT-Thread, B=Bluetooth.
    The "xx" suffix attached to the trade name represents the 8possible versions.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



 
RWC UK Ltd. DBA John Guest 
Horton Road
West Drayton 
Middlesex UB7 8JL 
United Kingdom 
44 189 544 9233
Visit this company's website


Facility : Middlesex, United Kingdom

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Valves[1] [G]
NC2811 NPTF Rigid Elbow with Check Valve 1/8" x 1/4" CLD 23 MLTPL

[1] May include -US Suffix to indicate PROP65 statement on bag
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



 
S.A. Armstrong, Ltd 
23 Bertrand Avenue
Toronto, ON M1L 2P3 
Canada 
716-693-8813
Visit this company's website


Facility : Toronto, Ontario, Canada

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Pumps[1] [G]
DE 4280 1203, followed by motor HP 1.5" x 1.25" D. HOT MLTPL
DE 4280 1505, followed by motor HP 2" x 1.5" D. HOT MLTPL
DE 4280 1505H, followed by motor HP 2" x 1.5" D. HOT MLTPL
DE 4380 0205, followed by motor HP 2" x 2" D. HOT MLTPL
DE 4380 0205H followed by motor HP 2" x 2" D. HOT MLTPL
DE 4380 1503, followed by motor HP 1.5" x 1.5" D. HOT MLTPL

[1] Sizes are suction x discharge.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



Facility : Taizhou, China

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Valves[1] [2] [G]
ARMflo CBV0XXXVTCR 1/2" - 2" CLD 23 MLTPL
ARMflo CBV0XXXVTCR LOW FLOW 1/2" - 3/4" CLD 23 MLTPL
ARMflo CBV0XXXVSCR-LF 1/2" - 3/4" CLD 23 MLTPL
ARMflo CBV0XXXVSCR LOW FLOW 1/2" - 3/4" CLD 23 MLTPL
ARMflo CBV0XXXVSCR 1/2" - 2" CLD 23 MLTPL
ARMflo CBV0XXXVBCR-LF 1/2"- 3/4" CLD 23 MLTPL
ARMflo CBV0XXXVTCR-LF 1/2" - 3/4" CLD 23 MLTPL
ARMflo CBV0XXXVBCR 1/2" - 2" CLD 23 MLTPL
ARMflo CBV0XXXVBCR LOW FLOW 1/2" - 3/4" CLD 23 MLTPL

[1] XX in trade name may be 050, 075, 100, 125, 150, or 200 and represents size.
[2] S indicates solder connection, T indicates NPT threaded connection, B indicates British
    BSPP (ISO-228) connection.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



 
SAFI 
13, Avenue Jaques Moison
Taulignan 26770 
France 
33 04 75 53 56 29
Visit this company's website


Facility : Cicagna(GE), Italy

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Valves
SAFI Ball Valves [1] [2] CLD 23 MLTPL

[1] Certified for the following products:
    Serie 4102 Double Union, Solvent Cement
      16 mm (Serie 4102 Solvent Cement DN 10)
      20 mm (Serie 4102 Solvent Cement DN 15)
      25 mm (Serie 4102 Solvent Cement DN 20)
      32 mm (Serie 4102 Solvent Cement DN 25)
      40 mm (Serie 4102 Solvent Cement DN 32)
      50 mm (Serie 4102 Solvent Cement DN 40)
      63 mm (Serie 4102 Solvent Cement DN 50)
      75 mm (Serie 4102 Solvent Cement DN 65)
      90 mm (Serie 4102 Solvent Cement DN 80)
      110 mm (Serie 4102 Solvent Cement DN 100)
    Serie 4102 Double Union, BSP Threaded
      3/8" (Serie 4102 BSP Threaded DN 10)
      1/2" (Serie 4102 BSP Threaded DN 15)
      3/4" (Serie 4102 BSP Threaded DN 20)
      1" (Serie 4102 BSP Threaded  DN 25)
      1 1/4" (Serie 4102 BSP Threaded  DN 32)
      1 1/2" (Serie 4102 BSP Threaded  DN 40)
      2" (Serie 4102 BSP Threaded  DN 50)
      2 1/2" (Serie 4102 BSP Threaded  DN 65)
      3" (Serie 4102 BSP Threaded  DN 80)
      4" (Serie 4102 BSP Threaded  DN 100)
    Serie 4102 Double Union, BS
      3/8" (Serie 4102 BS DN 10)
      1/2" (Serie 4102 BS DN 15)
      3/4" (Serie 4102 BS DN 20)
      1" (Serie 4102 BS DN 25)
      1 1/4" (Serie 4102 BS  DN 32)
      1 1/2" (Serie 4102 BS  DN 40)
      2" (Serie 4102 BS  DN 50)
      2 1/2" (Serie 4102 BS  DN 65)
      3" (Serie 4102 BS  DN 80)
      4" (Serie 4102 BS  DN 100)
    Serie 4102 Flanged Double Union, Solvent Ciment
      20 mm (Serie 4102 Flanged Double Union, Solvent Ciment DN 15)
      25 mm (Serie 4102 Flanged Double Union, Solvent Ciment DN 20)
      32 mm (Serie 4102 Flanged Double Union, Solvent Ciment DN 25)
      40 mm (Serie 4102 Flanged Double Union, Solvent Ciment DN 32)
      50 mm (Serie 4102 Flanged Double Union, Solvent Ciment DN 40)
      63 mm (Serie 4102 Flanged Double Union, Solvent Ciment DN 50)
      75 mm (Serie 4102 Flanged Double Union, Solvent Ciment DN 65)
      90 mm (Serie 4102 Flanged Double Union, Solvent Ciment DN 80)
      110 mm (Serie 4102 Flanged Double Union, Solvent Ciment DN 100)
    Serie 4101 Double Union, Metric
      16 mm (Serie 4101 Metric DN 10)
      20 mm (Serie 4101 Metric DN 15)
      25 mm (Serie 4101 Metric DN 20)
      32 mm (Serie 4101 Metric DN 25)
      40 mm (Serie 4101 Metric DN 32)
      50 mm (Serie 4101 Metric DN 40)
      63 mm (Serie 4101 Metric DN 50)
      75 mm (Serie 4101 Metric DN 65)
      90 mm (Serie 4101 Metric DN 80)
      110 mm (Serie 4101 Metric DN 100)
    Serie 4101 Double Union, BSP Threaded
      3/8" (Serie 4101 BSP Threaded DN 10)
      1/2" (Serie 4101 BSP Threaded DN 15)
      3/4" (Serie 4101 BSP Threaded DN 20)
      1" (Serie 4101 BSP Threaded DN 25)
      1 1/4" (Serie 4101 BSP Threaded DN 32)
      1 1/2" (Serie 4101 BSP Threaded DN 40)
      2" (Serie 4101 BSP Threaded DN 50)
      2 1/2" (Serie 4101 BSP Threaded DN 65)
      3" (Serie 4101 BSP Threaded DN 80)
      4" (Serie 4101 BSP Threaded DN 100)
    Serie 4101 Double Union, BS
      3/8" (Serie 4101 BS DN 10)
      1/2" (Serie 4101 BS DN 15)
      3/4" (Serie 4101 BS DN 20)
      1" (Serie 4101 BS DN 25)
      1 1/4" (Serie 4101 BS DN 32)
      1 1/2" (Serie 4101 BS DN 40)
      2" (Serie 4101 BS DN 50)
      2 1/2" (Serie 4101 BS DN 65)
      3" (Serie 4101 BS DN 80)
      4" (Serie 4101 BS DN 100)
    Serie 4101 Flanged Double Union, Solvent Cement
      20 mm (Serie 4101 Flanged Double Union, Solvent Cement DN 15)
      25 mm (Serie 4101 Flanged Double Union, Solvent Cement DN 20)
      32 mm (Serie 4101 Flanged Double Union, Solvent Cement DN 25)
      40 mm (Serie 4101 Flanged Double Union, Solvent Cement DN 32)
      50 mm (Serie 4101 Flanged Double Union, Solvent Cement DN 40)
      63 mm (Serie 4101 Flanged Double Union, Solvent Cement DN 50)
      75 mm (Serie 4101 Flanged Double Union, Solvent Cement DN 65)
      90 mm (Serie 4101 Flanged Double Union, Solvent Cement DN 80)
      110 mm (Serie 4101 Flanged Double Union, Solvent Cement DN 100)
[2] Serie 4103 Double Union, Metric Solvent Cement
      16 mm (Serie 4103 Metric Solvent Cement DN 10)
      20 mm (Serie 4103 Metric Solvent Cement DN 15)
      25 mm (Serie 4103 Metric Solvent Cement DN 20)
      32 mm (Serie 4103 Metric Solvent Cement DN 25)
      40 mm (Serie 4103 Metric Solvent Cement DN 32)
      50 mm (Serie 4103 Metric Solvent Cement DN 40)
      63 mm (Serie 4103 Metric Solvent Cement DN 50)
      75 mm (Serie 4103 Metric Solvent Cement DN 65)
      90 mm (Serie 4103 Metric Solvent Cement DN 80)
      110 mm (Serie 4103 Metric Solvent Cement DN 100)
    Serie 4103 Double Union, BSP Threaded
      3/8" (Serie 4103 BSP Threaded DN 10)
      1/2" (Serie 4103 BSP Threaded DN 15)
      3/4" (Serie 4103 BSP Threaded DN 20)
      1" (Serie 4103 BSP Threaded DN 25)
      1 1/4" (Serie 4103 BSP Threaded DN 32)
      1 1/2" (Serie 4103 BSP Threaded DN 40)
      2" (Serie 4103 BSP Threaded DN 50)
      2 1/2" ( Serie 4103 BSP Threaded DN 65)
      3" (Serie 4103 BSP Threaded DN 80)
      4" (Serie 4103 BSP Threaded DN 100)
    Serie 4103 Double Union, BS Solvent Cement
      3/8" (Serie 4103 BS Solvent Cement DN 10)
      1/2" (Serie 4103 BS Solvent Cement DN 15)
      3/4" (Serie 4103 BS Solvent Cement DN 20)
      1" (Serie 4103 BS Solvent Cement DN 25)
      1 1/4" (Serie 4103 BS Solvent Cement DN 32)
      1 1/2" (Serie 4103 BS Solvent Cement DN 40)
      2" (Serie 4103 BS Solvent Cement DN 50)
      2 1/2" (Serie 4103 BS Solvent Cement DN 65)
      3" (Serie 4103 BS Solvent Cement DN 80)
      4" (Serie 4103 BS Solvent Cement DN 100)
    Serie 4103 Double Union, ASTM
      20 mm (Serie 4103 ASTM DN 15)
      25 mm (Serie 4103 ASTM DN 20)
      32 mm (Serie 4103 ASTM DN 25)
      40 mm (Serie 4103 ASTM DN 32)
      50 mm (Serie 4103 ASTM DN 40)
      63 mm (Serie 4103 ASTM DN 50)
      75 mm (Serie 4103 ASTM DN 65)
      90 mm (Serie 4103 ASTM DN 80)
      110 mm (Serie 4103 ASTM DN 100)
    Serie 4103 Double Union, NPT Threaded
      1/2" (Serie 4103 NPT Threaded DN 15)
      3/4" (Serie 4103 NPT Threaded DN 20)
      1" (Serie 4103 NPT Threaded DN 25)
      1 1/4" (Serie 4103 NPT Threaded DN 32)
      1 1/2" (Serie 4103 NPT Threaded DN 40)
      2" (Serie 4103 NPT Threaded DN 50)
      2 1/2" (Serie 4103 NPT Threaded DN 65)
      3" (Serie 4103 NPT Threaded  DN 80)
      4" (Serie 4103 NPT Threaded DN 100)
    Serie 4103 Double Union, JIS
      20 mm (Serie 4103 JIS DN 15)
      25 mm (Serie 4103 JIS DN 20)
      32 mm (Serie 4103 JIS DN 25)
      40 mm (Serie 4103 JIS DN 32)
      50 mm (Serie 4103 JIS DN 40)
      63 mm (Serie 4103 JIS DN 50)
      75 mm (Serie 4103 JIS DN 65)
      90 mm (Serie 4103 JIS DN 80)
      110 mm (Serie 4103 JIS DN 100)



 
SAFI 
13, Avenue Jaques Moison
26770 Taulignan 
France 
33 04 75 53 56 29
Visit this company's website


Facility : Kaohsiung, Taiwan

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Valves[G]
SAFI 3001 PVC Ball Valve 1/2" - 4" CLD 23 MLTPL
SAFI 3101 CPVC True Union (Double Union) Ball Valve 1/2" - 4" C. HOT CPVC
SAFI 3111 PVC Compact Ball Valve 1/2" - 6" CLD 23 MLTPL

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



 
Samyang Corporation 
31 Jongno 33-gil, Jongno-gu
Seoul 03129 
Republic of Korea 
82 2 740 7733
Visit this company's website


Facility : Zhuzhou, China

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Filtration Devices/Components[1] [2] [3]
BWFR-4040 4" x 40" CLD 23 MLTPL
BWFR-8040 8" x 40" CLD 23 MLTPL
BWFR-8040-440 8" x 40" CLD 23 MLTPL
BWHR-4040 4" x 40" CLD 23 MLTPL
BWHR-8040 8" x 40" CLD 23 MLTPL
BWHR-8040-440 8" x 40" CLD 23 MLTPL
BWHR-8040LD 8" x 40" CLD 23 MLTPL
BWHR-8040LD-440 8" x 40" CLD 23 MLTPL
BWLE-2540 2.5" x 40" CLD 23 MLTPL
BWLE-4021 4" x 21" CLD 23 MLTPL
BWLE-4021HF 4" x 21" CLD 23 MLTPL
BWLE-4040 4" x 40" CLD 23 MLTPL
BWLE-4040HF 4" x 40" CLD 23 MLTPL
BWLE-8040 8" x 40" CLD 23 MLTPL
BWLE-8040HF 8" x 40" CLD 23 MLTPL
SWHR-2514 2.5" x 14" CLD 23 MLTPL
SWHR-4040 4" x 40" CLD 23 MLTPL
SWHR-8040 8" x 40" CLD 23 MLTPL
SWHR-8040-440 8" x 40" CLD 23 MLTPL

[1] Products have the following minimum daily flow:
    BWFR-4040       - 2200 gallons
    BWFR-8040       - 9600 gallons
    BWFR-8040-440   - 9600 gallons
    BWHR-4040       - 2400 gallons
    BWHR-8040       - 9600 gallons
    BWHR-8040LD     - 9600 gallons
    BWHR-8040-440   - 9600 gallons
    BWHR-8040LD-440 - 9600 gallons
    SWHR-2514       - 130 gallons
    SWHR-4040       - 1600 gallons
    SWHR-8040       - 7800 gallons
    SWHR-8040-440   - 7800 gallons
    BWLE-2540       - 750 gallons
    BWLE-4021HF     - 1000 gallons
    BWLE-4021       - 850 gallons
    BWLE-4040HF     - 2700 gallons
    BWLE-4040       - 1900 gallons
    BWLE-8040HF     - 10000 gallons
    BWLE-8040       - 10000 gallons
    
    
    
[2] Product requires a 1 hour deionized water flush at various flow rates and pressures
    depending on the model:
    BWFR-4040       - 10.19 gpm at 225 PSI
    BWHR-4040       - 11.11 gpm at 225 PSI
    SWHR-2514       - 4.51 gpm at 800 PSI
    SWHR-4040       - 13.89 gpm at 800 PSI
    SWHR-8040       - 67.71 gpm at 800 PSI
    SWHR-8040-440   - 67.71 gpm at 800 PSI
    BWLE-2540       - 3.47 gpm at 150 PSI
    BWLE-4021HF     - 8.68 gpm at 150 PSI
    BWFR-8040       - 44.44 gpm at 225 PSI
    BWFR-8040-440   - 44.44 gpm at 225 PSI
    BWHR-8040       - 44.44 gpm at 225 PSI
    BWHR-8040-440   - 44.44 gpm at 225 PSI
    BWHR-8040LD     - 44.44 gpm at 225 PSI
    BWHR-8040LD-440 - 44.44 gpm at 225 PSI
    BWLE-4021       - 73.78 gpm at 150 PSI
    BWLE-4040HF     - 12.50 gpm at 150 PSI
    BWLE-4040       - 8.80 gpm at 150 PSI
    BWLE-8040HF     - 61.11 gpm at 150 PSI
    BWLE-8040       - 48.61 gpm at 150 PSI
[3] HR - High Rejection
    LD - Low Pressure Differential
    HF - High Flux



 
Scienco / FAST, Sub. of Bio-Microbics 
200 Sun Valley Circle
Fenton, MO 63026 
United States 
866-652-4539 
314-756-9300
Visit this company's website


Facility : Fenton, MO

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Chemical Feeders[1] [G]
Brine Feed Duplex Pump Skid [2] CLD 23 MLTPL

[1] Certification of this product has been performed to the health effects requirements of
    NSF/ANSI Standard 61, which assesses the acceptability of potential extractants from the
    chemical generator. No evaluation has been performed on the strength or efficacy of the
    chemical(s) generated. As unit operation, maintenance and the consistency of source
    ingredients may affect the performance of the unit, the ensuing chemical(s) is not
    certified by NSF to NSF/ANSI Standard 60.
[2] Certified for use with a 26.4% brine solution or 8000 ppm hypochlorite solution with a
    dosage rate yielding a maximum chlorine concentration of 10 mg/L into potable water.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



 
Sejin Valve Ind. Co., Ltd. 
16, Hwajeonsandan 2-Ro
133beon-gil 
Gangseo-gu, 26 46738 
Republic of Korea 
82 51 831 7747
Visit this company's website


Facility : Busan, Republic of Korea

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Valves[1] [G]
Butterfly Type Non-Slam Check Valve / NRV 12" - 104" CLD 23 MLTPL
Butterfly Valve / HFA 4" - 120" CLD 23 MLTPL

[1] Only products bearing the NSF Mark on the product, product packaging, and/or
    documentation shipped with the product are Certified.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



 
SEKO S.p.A. 
Via Salaria per L'Aquila km 92, 200
02015 Santa Rufina di Cittaducale (RI) 
Italy 
39 07 466 05801
Visit this company's website


Facility : Santa Rufina di Cittaducale (RI), Italy

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Pumps - Chemical Metering[1] [G]
HAYWARD PUMP (A)(B)(C)(D)(E)(F)(G)(H)(I)[2] 1/4" - 3/8" CLD 23 MLTPL
INJECTA ATHENA PUMP (A)(B)(C)(D)(E)(F)(G)(H)(I)[3] 1/4" - 3/8" CLD 23 MLTPL
SEKO TEKNA EVO PUMP (A)(B)(C)(D)(E)(F)(G)(H)(I)[5] 1/4" - 3/8" CLD 23 MLTPL

[1] Certified for use with Sodium Hypochlorite (14%). This product is evaluated by diluting
    the exposed water treatment chemical to its maximum use level (MUL), as defined in
    NSF/ANSI Standard 60.
[2] HAYWARD PUMP ABCDEFGHI
    A - Model: WKL, WAP, WTL, WPG, WPR, WCK
    B - Pump hydraulics: 603, 800, 803
    C - Power Supply: N
    D - Pump Head: H (PVDF and Ceramic), A (PVDF and Ceramic)
    E - Installation Kit: H (PVDF and Ceramic)
    F - Seals: 0 (FPM)
    G - Market: U
    H - Optional: 0
    I - Optional: H
[3] INJECTA ATHENA PUMP ABCDEFGHI
    A - Model: ATBL, ATAM, ATAT, ATMT, ATPR, ATBT
    B - Pump hydraulics: 6, 0, 1, 2, 3, 4
    C - Power Supply: A, N, O, L
    D - Pump Head: PF/PV (PVDF and Ceramic)
    E - Seals: F (FPM)
    F - Balls: C (Ceramic)
    G - Market: U
    H - Optional: 0, 1
    I - Optional: 0, 1
[4] SEKO RAPID PUMP RAL603NHH0UV(I)
    I - Optional: 0, 1
[5] SEKO TEKNA EVO PUMP ABCDEFGHI
    A - Model: AKL, APG, ATL, TCK, TPG, TPR
    B - Pump hydraulics: 400, 500, 600, 603, 800, 803
    C - Power Supply: A, N, O, L, C
    D - Pump Head: H (PVDF and Ceramic), A (PVDF and Ceramic)
    E - Installation Kit: H (PVDF and Ceramic)
    F - Seals: 0 (FPM)
    G - Market: U
    H - Optional: 0
    I - Optional: 0, 1
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



 
Sensata Technologies De Mexico S. De R.L. De C.V. 
Av. Aguascalientes Sur #401
Ex-Ejido Ojo Caliente 
Aguascalientes 20290 
Mexico 
52 449 910 5500
Visit this company's website


Facility : # 1 Mexico

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Switches/Sensors[1] [G]
126CP3 Family 1/4" C. HOT MLTPL
126CP4 Family 3/8" C. HOT MLTPL
126CP6 Family 1/2" C. HOT MLTPL

[1] Naming Convention:							
    126 represents 5VDC Ratiometric, Drinking Water Safe							
    CP represents Ceramic Capacitive Pressure (APT)							
    3, 4, and 6 represent the ports: 3 (G1/4 Thread), 4 (G3/8 Thread), 6 (Quick Connect Type
    3 with no parting line at o-ring seal)
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



 
Sensata Technology Baoying Co., Ltd. 
9 East Taishan Road
Baoying 
Jiangsu 225800 
China 
86 514 88873123


Facility : Zhejiang, China

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Switches/Sensors[G]
FSU12A 1/2" C. HOT MLTPL
FSU34A 3/4" C. HOT MLTPL
FSU50A 1/2" C. HOT MLTPL
FSU75A 3/4" C. HOT MLTPL

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



 
Sensus USA Inc. 
637 Davis Drive
Morrisville, NC 27560 
United States 
724-439-7700
Visit this company's website


Facility : Uniontown, PA

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Water Meters
OMNI F²[G] 4" - 10" CLD 23 MLTPL

[1] The certified sizes are: 5/8", 20 mm, 3/4", 1".
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



 
Shaanxi UltraClean Membrane Co., Ltd. 
New Material Industrial Park, Ankang
National High Industries Development 
Zone, Ankang City, Shaanxi 725000 
China 
86-0915-2296880


Facility : Shaanxi, China

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Reverse Osmosis Element [G]
IC BW-4040-82FR/34[1] [2] [3] 3.9" x 40" CLD 23 MLTPL
IC BW-4040-82FRLE/34[1] [2] [3] 3.9" x 40" CLD 23 MLTPL
IC BW-4040-82XFR/34[1] [2] [3] 3.9" x 40" CLD 23 MLTPL
IC BW-8040-400FR/34[1] [2] [3] 7.9" x 40" CLD 23 MLTPL
IC BW-8040-400FRLE/34[1] [2] [3] 7.9" x 40" CLD 23 MLTPL
IC BW-8040-400XFR/34[1] [2] [3] 7.9" x 40" CLD 23 MLTPL
IC DTNF(90)[1] [2] [3] 8.5" x 55.12" CLD 23 MLTPL
IC NF150-400/34[1] [2] [3] 7.9" x 40" CLD 23 MLTPL
IC NF150-82[1] [2] [3] 3.9" x 40" CLD 23 MLTPL
IC NF280-400[1] [2] [3] 7.9" x 40" CLD 23 MLTPL
IC NF280-82[1] [2] [3] 3.9" x 40" CLD 23 MLTPL
IC NF500-400[1] [2] [3] 7.9" x 40" CLD 23 MLTPL
IC NF500-82[1] [2] [3] 3.9" x 40" CLD 23 MLTPL
IC NF90-400[1] [2] [3] 7.9" x 40" CLD 23 MLTPL
IC NF90-82[1] [2] [3] 3.9" x 40" CLD 23 MLTPL
IC SF-HC1-400[1] [2] [3] 7.9" x 40" CLD 23 MLTPL
IC SF-HC1-82[1] [2] [3] 3.9" x 40" CLD 23 MLTPL
IC SF-HC2-400[1] [2] [3] 7.9" x 40" CLD 23 MLTPL
IC SF-HC2-82[1] [2] [3] 3.9" x 40" CLD 23 MLTPL
IC SF-HC3-400[1] [2] [3] 7.9" x 40" CLD 23 MLTPL
IC SF-HC3-82[1] [2] [3] 3.9" x 40" CLD 23 MLTPL
IC SF-HC4-400[1] [2] [3] 7.9" x 40" CLD 23 MLTPL
IC SF-HC4-82[1] [2] [3] 3.9" x 40" CLD 23 MLTPL
IC STNF-8035(90)[1] [2] [3] 7.9" x 35" CLD 23 MLTPL
IC STNF-8040(90)[1] [2] [3] 7.9" x 40" CLD 23 MLTPL
IC STNF-8042(90)[1] [2] [3] 7.9" x 42" CLD 23 MLTPL
IC SW-8040-400HRFR/34[1] [2] [3] 7.9" x 40" CLD 23 MLTPL
TF BW-4040-82FR/34[1] [2] [3] 3.9" x 40" CLD 23 MLTPL
TF BW-4040-82FRLE/34[1] [2] [3] 3.9" x 40" CLD 23 MLTPL
TF BW-4040-82HR[1] [2] [3] 3.9" x 40" CLD 23 MLTPL
TF BW-4040-82HRLE[1] [2] [3] 3.9" x 40" CLD 23 MLTPL
TF BW-4040-82XFR/34[1] [2] [3] 3.9" x 40" CLD 23 MLTPL
TF BW-4040-82XLE[1] [2] [3] 3.9" x 40" CLD 23 MLTPL
TF BW-8040-400FR/34[1] [2] [3] 7.9" x 40" CLD 23 MLTPL
TF BW-8040-400FRLE/34[1] [2] [3] 7.9" x 40" CLD 23 MLTPL
TF BW-8040-400HR[1] [2] [3] 7.9" x 40" CLD 23 MLTPL
TF BW-8040-400HRLE[1] [2] [3] 7.9" x 40" CLD 23 MLTPL
TF BW-8040-400XFR/34[1] [2] [3] 7.9" x 40" CLD 23 MLTPL
TF BW-8040-400XLE[1] [2] [3] 7.9" x 40" CLD 23 MLTPL
TF BW-8040-440HR[1] [2] [3] 7.9" x 40" CLD 23 MLTPL
TF BW-8040-440HRLE[1] [2] [3] 7.9" x 40" CLD 23 MLTPL
TF BW-8040-440XLE[1] [2] [3] 7.9" x 40" CLD 23 MLTPL
TF DTNF(90)[1] [2] [3] 8.5" x 55.12" CLD 23 MLTPL
TF DTRO(120)[1] [2] [3] 9.45" x 55.12" CLD 23 MLTPL
TF DTRO(75)[1] [2] [3] 8.5" x 55.12" CLD 23 MLTPL
TF DTRO(90)[1] [2] [3] 8.66" x 55.12" CLD 23 MLTPL
TF LP-4040-82[1] [2] [3] 3.9" x 40" CLD 23 MLTPL
TF LP-8040-400[1] [2] [3] 7.9" x 40" CLD 23 MLTPL
TF NF150-400/34[1] [2] [3] 7.9" x 40" CLD 23 MLTPL
TF NF150-82[1] [2] [3] 3.9" x 40" CLD 23 MLTPL
TF NF280-400[1] [2] [3] 7.9" x 40" CLD 23 MLTPL
TF NF280-82[1] [2] [3] 3.9" x 40" CLD 23 MLTPL
TF NF500-400[1] [2] [3] 7.9" x 40" CLD 23 MLTPL
TF NF500-82[1] [2] [3] 3.9" x 40" CLD 23 MLTPL
TF NF90-400[1] [2] [3] 7.9" x 40" CLD 23 MLTPL
TF NF90-82[1] [2] [3] 3.9" x 40" CLD 23 MLTPL
TF SF-HC1-400[1] [2] [3] 7.9" x 40" CLD 23 MLTPL
TF SF-HC1-82[1] [2] [3] 3.9" x 40" CLD 23 MLTPL
TF SF-HC2-400[1] [2] [3] 7.9" x 40" CLD 23 MLTPL
TF SF-HC2-82[1] [2] [3] 3.9" x 40" CLD 23 MLTPL
TF SF-HC3-400[1] [2] [3] 3.9" x 40" CLD 23 MLTPL
TF SF-HC3-82[1] [2] [3] 3.9" x 40" CLD 23 MLTPL
TF SF-HC4-400[1] [2] [3] 7.9" x 40" CLD 23 MLTPL
TF SF-HC4-82[1] [2] [3] 3.9" x 40" CLD 23 MLTPL
TF STNF-8035(90)[1] [2] [3] 7.9" x 35" CLD 23 MLTPL
TF STNF-8040(90)[1] [2] [3] 7.9" x 40" CLD 23 MLTPL
TF STNF-8042(90)[1] [2] [3] 7.9" x 42" CLD 23 MLTPL
TF STRO-8035(120)[1] [2] [3] 7.9" x 35" CLD 23 MLTPL
TF STRO-8035(75)[1] [2] [3] 7.9" x 35" CLD 23 MLTPL
TF STRO-8035(90)[1] [2] [3] 7.9" x 35" CLD 23 MLTPL
TF STRO-8040(120)[1] [2] [3] 7.9" x 40" CLD 23 MLTPL
TF STRO-8040(75)[1] [2] [3] 7.9" x 40" CLD 23 MLTPL
TF STRO-8040(90)[1] [2] [3] 7.9" x 40" CLD 23 MLTPL
TF STRO-8042(120)[1] [2] [3] 7.9" x 42" CLD 23 MLTPL
TF STRO-8042(75)[1] [2] [3] 7.9" x 42" CLD 23 MLTPL
TF STRO-8042(90)[1] [2] [3] 7.9" x 42" CLD 23 MLTPL
TF SW-2521-12HR[1] [2] [3] 2.4" x 21" CLD 23 MLTPL
TF SW-2521-12HRLE[1] [2] [3] 2.4" x 21" CLD 23 MLTPL
TF SW-2540-28HR[1] [2] [3] 2.4" x 40" CLD 23 MLTPL
TF SW-2540-28HRLE[1] [2] [3] 2.4" x 40" CLD 23 MLTPL
TF SW-4021-33HR[1] [2] [3] 3.9" x 21" CLD 23 MLTPL
TF SW-4021-33HRLE[1] [2] [3] 3.9" x 21" CLD 23 MLTPL
TF SW-4040-82HR[1] [2] [3] 3.9" x 40" CLD 23 MLTPL
TF SW-4040-82HRLE[1] [2] [3] 3.9" x 40" CLD 23 MLTPL
TF SW-4040-82XLE[1] [2] [3] 3.9" x 40" CLD 23 MLTPL
TF SW-8040-400HR[1] [2] [3] 7.9" x 40" CLD 23 MLTPL
TF SW-8040-400HRFR/34[1] [2] [3] 7.9" x 40" CLD 23 MLTPL
TF SW-8040-400HRLE[1] [2] [3] 7.9" x 40" CLD 23 MLTPL
TF SW-8040-400XHR[1] [2] [3] 7.9" x 40" CLD 23 MLTPL
TF SW-8040-400XLE[1] [2] [3] 7.9" x 40" CLD 23 MLTPL
TF SW-8040-440HRLE[1] [2] [3] 7.9" x 40" CLD 23 MLTPL
TF SW-8040-440XHR[1] [2] [3] 7.9" x 40" CLD 23 MLTPL
TF SW-8040-440XLE[1] [2] [3] 7.9" x 40" CLD 23 MLTPL
TF ULP-4040-82[1] [2] [3] 3.9" x 40" CLD 23 MLTPL
TF ULP-8040-400[1] [2] [3] 7.9" x 40" CLD 23 MLTPL
TF ULP-8040-440[1] [2] [3] 7.9" x 40" CLD 23 MLTPL
TF XLP-4040-82[1] [2] [3] 3.9" x 40" CLD 23 MLTPL
TF XLP-8040-400[1] [2] [3] 7.9" x 40" CLD 23 MLTPL
TF XLP-8040-440[1] [2] [3] 7.9" x 40" CLD 23 MLTPL
UC BW-4040-82FR/34[1] [2] [3] 3.9" x 40" CLD 23 MLTPL
UC BW-4040-82FRLE/34[1] [2] [3] 3.9" x 40" CLD 23 MLTPL
UC BW-4040-82XFR/34[1] [2] [3] 3.9" x 40" CLD 23 MLTPL
UC BW-8040-400FR/34[1] [2] [3] 7.9" x 40" CLD 23 MLTPL
UC BW-8040-400FRLE/34[1] [2] [3] 7.9" x 40" CLD 23 MLTPL
UC BW-8040-400XFR/34[1] [2] [3] 7.9" x 40" CLD 23 MLTPL
UC DTNF(90)[1] [2] [3] 8.5" x 55.12" CLD 23 MLTPL
UC NF150-400/34[1] [2] [3] 7.9" x 40" CLD 23 MLTPL
UC NF150-82[1] [2] [3] 3.9" x 40" CLD 23 MLTPL
UC NF280-400[1] [2] [3] 7.9" x 40" CLD 23 MLTPL
UC NF280-82[1] [2] [3] 3.9" x 40" CLD 23 MLTPL
UC NF500-400[1] [2] [3] 7.9" x 40" CLD 23 MLTPL
UC NF500-82[1] [2] [3] 3.9" x 40" CLD 23 MLTPL
UC NF90-400[1] [2] [3] 7.9" x 40" CLD 23 MLTPL
UC NF90-82[1] [2] [3] 3.9" x 40" CLD 23 MLTPL
UC SF-HC1-400[1] [2] [3] 7.9" x 40" CLD 23 MLTPL
UC SF-HC1-82[1] [2] [3] 3.9" x 40" CLD 23 MLTPL
UC SF-HC2-400[1] [2] [3] 7.9" x 40" CLD 23 MLTPL
UC SF-HC2-82[1] [2] [3] 3.9" x 40" CLD 23 MLTPL
UC SF-HC3-400[1] [2] [3] 7.9" x 40" CLD 23 MLTPL
UC SF-HC3-82[1] [2] [3] 3.9" x 40" CLD 23 MLTPL
UC SF-HC4-400[1] [2] [3] 7.9" x 40" CLD 23 MLTPL
UC SF-HC4-82[1] [2] [3] 3.9" x 40" CLD 23 MLTPL
UC STNF-8035(90)[1] [2] [3] 7.9" x 35" CLD 23 MLTPL
UC STNF-8040(90)[1] [2] [3] 7.9" x 40" CLD 23 MLTPL
UC STNF-8042(90)[1] [2] [3] 7.9" x 42" CLD 23 MLTPL
UC SW-8040-400HRFR/34[1] [2] [3] 7.9" x 40" CLD 23 MLTPL

[1] Naming convention:
    UC (UltraClean)/TF (Transfilm)/IC (IonClear): branding
    HR: high rejection
    XHR: ultra-high rejection
    XLE: extra-low energy consumption
    HRLE: high rejection and low energy consumption
    FR: fouling resistance
    XFR: ultra-fouling resistance
    FRLE: fouling resistance and low energy consumption
[2] Certified for the following minimum daily (24 hour) permeate generation volumes for use
    in public water treatment facilities:
    UC SW-2521-12HR, TF SW-2521-12HR, IC SW-2521-12HR: 240 gallons
    UC SW-2521-12HRLE, TF SW-2521-12HRLE, IC SW-2521-12HRLE: 290 gallons
    UC DTRO(90), UC DTRO(120), TF DTRO(90), TF DTRO(120), IC DTRO(90), IC DTRO(120): 400
    gallons
    UC DTRO(75), TF DTRO(75), IC DTRO(75): 420 gallons
    UC DTNF(90), TF DTNF(90), IC DTNF(90): 450 gallons
    UC SW-2540-28HR, TF SW-2540-28HR, IC SW-2540-28HR: 580 gallons
    UC SW-4021-33HR, TF SW-4021-33HR, IC SW-4021-33HR: 660 gallons
    UC SW-2540-28HRLE, TF SW-2540-28HRLE, IC SW-2540-28HRLE: 680 gallons
    UC SW-4021-33HRLE, TF SW-4021-33HRLE, IC SW-4021-33HRLE: 790 gallons
    UC SW-4040-82HR, TF SW-4040-82HR, IC SW-4040-82HR: 1,320 gallons
    UC NF90-82, TF NF90-82, IC NF90-82: 1,580 gallons
    UC SW-4040-82HRLE, TF SW-4040-82HRLE, IC SW-4040-82HRLE: 1,600 gallons
    UC SW-4040-82XLE, TF SW-4040-82XLE, IC SW-4040-82XLE: 1,660 gallons
    UC SF-HC4-82, TF SF-HC4-82, IC SF-HC4-82: 1,720 gallons
    UC NF150-82, UC SF-HC3-82, TF NF150-82, TF SF-HC3-82, IC NF150-82, IC SF-HC3-82: 1,850
    gallons
    UC BW-4040-82FRLE/34, UC SF-HC2-82, TF BW-4040-82FRLE/34, TF SF-HC2-82, IC BW-4040-
    82FRLE/34, IC SF-HC2-82: 1,900 gallons
    UC BW-4040-82FR/34, TF BW-4040-82FR/34, IC BW-4040-82FR/34: 2,000 gallons
    UC BW-4040-82XFR/34, TF BW-4040-82XFR/34, IC BW-4040-82XFR/34: 2,050 gallons
    UC XLP-4040-82, TF XLP-4040-82, IC XLP-4040-82: 2,220 gallons
    UC ULP-4040-82, UC BW-4040-82HR, UC BW-4040-82HRLE, UC NF280-82, TF ULP-4040-82, TF BW-
    4040-82HR, TF BW-4040-82HRLE, TF NF280-82, IC ULP-4040-82, IC BW-4040-82HR, IC BW-4040-
    82HRLE, IC NF280-82: 2,250 gallons
    UC BW-4040-82XLE, TF BW-4040-82XLE, IC BW-4040-82XLE: 2,400 gallons
    UC LP-4040-82, TF LP-4040-82, IC LP-4040-82: 2,500 gallons
    UC SF-HC1-82, TF SF-HC1-82, IC SF-HC1-82: 2,550 gallons
    UC NF500-82, TF NF500-82, IC NF500-82: 2,900 gallons
    UC STRO-8035(120), TF STRO-8035(120), IC STRO-8035(120): 5,000 gallons
    UC STRO-8042(120), TF STRO-8042(120), IC STRO-8042(120): 5,280 gallons
[3] Certified for the following minimum daily (24 hour) permeate generation volumes for use
    in public water treatment facilities:
    UC STRO-8035(90), UC STRO-8040(120), TF STRO-8035(90), TF STRO-8040(120), IC STRO-
    8035(90), IC STRO-8040(120): 5,800 gallons
    UC STRO-8042(90), UC STNF-8035(90), TF STRO-8042(90), TF STNF-8035(90), IC
    STRO-8042(90),
    IC STNF-8035(90): 6,070 gallons
    UC SW-8040-400XHR, TF SW-8040-400XHR, IC SW-8040-400XHR: 6,100 gallons
    UC SW-8040-400HR, UC SW-8040-400HRFR/34, TF SW-8040-400HR, TF SW-8040-400HRFR/34, IC SW-
    8040-400HR, IC SW-8040-400HRFR/34: 6,500 gallons
    UC SW-8040-440XHR, UC STRO-8040(90), UC STNF-8042(90), TF SW-8040-440XHR, TF STRO-
    8040(90), TF STNF-8042(90), IC SW-8040-440XHR, IC STRO-8040(90), IC STNF-8042(90): 6,600
    gallons
    UC STNF-8040(90), TF STNF-8040(90), IC STNF-8040(90): 6,860 gallons
    UC STRO-8035(75), TF STRO-8035(75), IC STRO-8035(75): 7,390 gallons
    UC SW-8040-400HRLE, TF SW-8040-400HRLE, IC SW-8040-400HRLE: 7,400 gallons
    UC STRO-8042(75), TF STRO-8042(75), IC STRO-8042(75): 7,500 gallons
    UC SW-8040-440HRLE, UC STRO-8040(75), TF SW-8040-440HRLE, TF STRO-8040(75), IC SW-8040-
    440HRLE, IC STRO-8040(75): 7,900 gallons
    UC SF-HC4-400, TF SF-HC4-400, IC SF-HC4-400: 7,980 gallons
    UC NF90-400, TF NF90-400, IC NF90-400: 8,200 gallons
    UC SW-8040-400XLE, UC SF-HC3-400, TF SW-8040-400XLE, TF SF-HC3-400, IC SW-8040-400XLE,
    IC
    SF-HC3-400: 8,450 gallons
    UC NF150-400/34, TF NF150-400/34, IC NF150-400/34: 8,950 gallons
    UC SF-HC2-400, TF SF-HC2-400, IC SF-HC2-400: 9,300 gallons
    UC SW-8040-440XLE, TF SW-8040-440XLE, IC SW-8040-440XLE: 9,380 gallons
    UC BW-8040-400FRLE/34, TF BW-8040-400FRLE/34, IC BW-8040-400FRLE/34: 10,500 gallons
    UC NF280-400, TF NF280-400, IC NF280-400: 10,550 gallons
    UC LP-8040-400, TF LP-8040-400, IC LP-8040-400: 11,000 gallons
    UC BW-8040-400FR/34, TF BW-8040-400FR/34, IC BW-8040-400FR/34: 11,100 gallons
    UC ULP-8040-400, UC BW-8040-400HR, UC BW-8040-400XFR/34, UC BW-8040-400HRLE, TF
    ULP-8040-
    400, TF BW-8040-400HR, TF BW-8040-400XFR/34, TF BW-8040-400HRLE, IC ULP-8040-400, IC BW-
    8040-400HR, IC BW-8040-400XFR/34, IC BW-8040-400HRLE: 11,350 gallons
    UC XLP-8040-400, TF XLP-8040-400, IC XLP-8040-400: 11,900 gallons
    UC BW-8040-400XLE, TF BW-8040-400XLE, and IC BW-8040-400XLE: 12,550 gallons
    UC BW-8040-440HR, UC BW-8040-440HRLE, TF BW-8040-440HR, TF BW-8040-440HRLE, IC BW-8040-
    440HR, IC BW-8040-440HRLE: 12,560 gallons
    UC ULP-8040-440, UC SF-HC1-400, TF ULP-8040-440, TF SF-HC1-400, IC ULP-8040-440, IC
    SFHC1-
    400: 12,650 gallons
    UC NF500-400, TF NF500-400, IC NF500-400: 12,680 gallons
    UC XLP-8040-440, TF XLP-8040-440, IC XLP-8040-440: 13,200 gallons
    UC BW-8040-440XLE, TF BW-8040-440XLE, IC BW-8040-440XLE: 14,000 gallons
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



 
Shakti Pumps (India) Limited 
Plot # 401, 402 & 413
Sector 3, Pithampur Dhar 
Madhya Pradesh 454774 
India 
91 729 2407044
Visit this company's website


Facility : Madhya Pradesh, India

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Pumps[1] [2] [G]
SURFACE PUMP SCR1 1.25" CLD 23 MLTPL
SURFACE PUMP SCR10 1.5" CLD 23 MLTPL
SURFACE PUMP SCR15 2" CLD 23 MLTPL
SURFACE PUMP SCR1S 1.25" CLD 23 MLTPL
SURFACE PUMP SCR20 2" CLD 23 MLTPL
SURFACE PUMP SCR3 1.25" CLD 23 MLTPL
SURFACE PUMP SCR32 2.5" CLD 23 MLTPL
SURFACE PUMP SCR45 3" CLD 23 MLTPL
SURFACE PUMP SCR5 1.25" CLD 23 MLTPL
SURFACE PUMP SCR64 4" CLD 23 MLTPL
SURFACE PUMP SCR90 4" CLD 23 MLTPL

[1] (X) -Y-Z-M-N-O
    X: Model variant SCR, SCRI, or SCRN
    Y: Flow rate in m^3/h
    Z: All impeller with reduced diameter
    M: Number of impeller
    N: Number of reduced impeller
    O: Mechanical seal
[2] The following are sold as replacement parts: pump head, pump shaft, pump base, neck
    ring, mechanical seal, impeller, chamber, outer sleeve, o-ring,
    radial bush, pump head cover, base plate, bearing ring, pump base bush, and bearing ring
    rotating
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

NOTE: The only product or shipping records that bear the NSF mark are certified with NSF


Facility : Madhya Pradesh, India

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Pumps - Submersible Pumps - Pump Ends[1] [2] [G]
SUBMERSIBLE PUMP QF1 4" CLD 23 MLTPL
SUBMERSIBLE PUMP QF2 4" CLD 23 MLTPL
SUBMERSIBLE PUMP QF5 4" CLD 23 MLTPL
SUBMERSIBLE PUMP QF6 4" CLD 23 MLTPL
SUBMERSIBLE PUMP QF12 4" CLD 23 MLTPL
SUBMERSIBLE PUMP QF20 4" CLD 23 MLTPL
SUBMERSIBLE PUMP QF25 4" CLD 23 MLTPL
SUBMERSIBLE PUMP QF30 6" CLD 23 MLTPL
SUBMERSIBLE PUMPS QF50 6" CLD 23 MLTPL
SUBMERSIBLE PUMPS QF75 6" CLD 23 MLTPL
SUBMERSIBLE PUMPS QF100 6" CLD 23 MLTPL
SUBMERSIBLE PUMPS QF125 8" CLD 23 MLTPL
SUBMERSIBLE PUMPS QF160 8" CLD 23 MLTPL
SUBMERSIBLE PUMPS QF210 10" CLD 23 MLTPL
SUBMERSIBLE PUMPS QF270 10" CLD 23 MLTPL
SUBMERSIBLE PUMPS QF360 10" CLD 23 MLTPL

[1] X-Y-Z-M-N
    X - Type Range (QF)
    Y - Model (QF 1 to QF 360)
    Z - Number of impellers
    M - First impeller with reduced diameter (A, B or C)
    N - Second impeller with reduced diameter (A, B or C)
[2] Certification does not include the pump motor / driver and submersible pump cables.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

NOTE: The only product or shipping records that bear the NSF mark are certified with NSF


 
Shandong Craier Environmental Technology Co., Ltd. 
No.9 Anju Road,Jiaming Industrial Park
Liaocheng, Shandong, 252100 
China 
86 635 334 3158
Visit this company's website


Facility : Shandong, China

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Filtration Devices/Components[1] [G]
K8040S-G-300PSI[2] 113 L CLD 23 MLTPL
K8080S-G-300PSI[2] 184.4 L CLD 23 MLTPL
K80120S-G-300PSI[2] 198.8 L CLD 23 MLTPL
K80160S-G-300PSI[2] 257.5 L CLD 23 MLTPL
K80200S-G-300PSI[2] 316 L CLD 23 MLTPL
K80240S-G-300PSI[2] 374.5 L CLD 23 MLTPL
K80280S-G-300PSI[2] 416.9 L CLD 23 MLTPL
K8040S-G-450PSI[2] 113 L CLD 23 MLTPL
K8080S-G-450PSI[2] 185.9 L CLD 23 MLTPL
K80120S-G-450PSI[2] 203.8 L CLD 23 MLTPL
K80160S-G-450PSI[2] 263.9 L CLD 23 MLTPL
K80200S-G-450PSI[2] 323.9 L CLD 23 MLTPL
K80240S-G-450PSI[2] 383.9 L CLD 23 MLTPL
K80280S-G-450PSI[2] 427.4 L CLD 23 MLTPL
K8040S-G-600PSI[2] 911.9 L CLD 23 MLTPL
K8080S-G-600PSI[2] 154.7 L CLD 23 MLTPL
K80120S-G-600PSI[2] 218.2 L CLD 23 MLTPL
K80160S-G-600PSI[2] 281.9 L CLD 23 MLTPL
K80200S-G-600PSI[2] 345.4 L CLD 23 MLTPL
K80240S-G-600PSI[2] 408.9 L CLD 23 MLTPL
K80280S-G-600PSI[2] 472.4 L CLD 23 MLTPL
K8040S-G-800PSI[2] 104.1 L CLD 23 MLTPL
K8080S-G-800PSI[2] 174.4 L CLD 23 MLTPL
K80120S-G-800PSI[2] 244.7 L CLD 23 MLTPL
K80160S-G-800PSI[2] 315 L CLD 23 MLTPL
K80200S-G-800PSI[2] 385.3 L CLD 23 MLTPL
K80240S-G-800PSI[2] 455.5 L CLD 23 MLTPL
K80280S-G-800PSI[2] 526 L CLD 23 MLTPL
K8040S-G-1000PSI[2] 106.5 L CLD 23 MLTPL
K8080S-G-1000PSI[2] 170.4 L CLD 23 MLTPL
K80120S-G-1000PSI[2] 250.3 L CLD 23 MLTPL
K80160S-G-1000PSI[2] 322.2 L CLD 23 MLTPL
K80200S-G-1000PSI[2] 394.1 L CLD 23 MLTPL
K80240S-G-1000PSI[2] 466 L CLD 23 MLTPL
K80280S-G-1000PSI[2] 538 L CLD 23 MLTPL
K8040S-G-1200PSI[2] 108.6 L CLD 23 MLTPL
K8080S-G-1200PSI[2] 181.6 L CLD 23 MLTPL
K80120S-G-1200PSI[2] 245.4 L CLD 23 MLTPL
K80160S-G-1200PSI[2] 327.8 L CLD 23 MLTPL
K80200S-G-1200PSI[2] 400.8 L CLD 23 MLTPL
K80240S-G-1200PSI[2] 473.8 L CLD 23 MLTPL
K80280S-G-1200PSI[2] 546.8 L CLD 23 MLTPL
K8040S-G-1400PSI[2] 117.9 L CLD 23 MLTPL
K8080S-G-1400PSI[2] 193.6 L CLD 23 MLTPL
K80120S-G-1400PSI[2] 269.3 L CLD 23 MLTPL
K80160S-G-1400PSI[2] 345.2 L CLD 23 MLTPL
K80200S-G-1400PSI[2] 420.9 L CLD 23 MLTPL
K80240S-G-1400PSI[2] 496.7 L CLD 23 MLTPL
K80280S-G-1400PSI[2] 572.4 CLD 23 MLTPL
K8040S-G-1600PSI[2] 122.5 L CLD 23 MLTPL
K8080S-G-1600PSI[2] 200.5 L CLD 23 MLTPL
K80120S-G-1600PSI[2] 278.4 L CLD 23 MLTPL
K80160S-G-1600PSI[2] 356.6 L CLD 23 MLTPL
K80200S-G-1600PSI[2] 434.6 L CLD 23 MLTPL
K80240S-G-1600PSI[2] 512.5 L CLD 23 MLTPL
K80280S-G-1600PSI[2] 590.5 L CLD 23 MLTPL
K8040S-G-1800PSI[2] 128 L CLD 23 MLTPL
K8080S-G-1800PSI[2] 207.1 L CLD 23 MLTPL
K80120S-G-1800PSI[2] 286.2 L CLD 23 MLTPL
K80160S-G-1800PSI[2] 365.5 L CLD 23 MLTPL
K80200S-G-1800PSI[2] 444.6 L CLD 23 MLTPL
K80240S-G-1800PSI[2] 523.7 L CLD 23 MLTPL
K80280S-G-1800PSI[2] 602.8 L CLD 23 MLTPL
K8040E-G-300PSI[2] 113 L CLD 23 MLTPL
K8080E-G-300PSI[2] 184.4 L CLD 23 MLTPL
K80120E-G-300PSI[2] 198.8 L CLD 23 MLTPL
K80160E-G-300PSI[2] 257.5 L CLD 23 MLTPL
K80200E-G-300PSI[2] 316 L CLD 23 MLTPL
K80240E-G-300PSI[2] 374.5 L CLD 23 MLTPL
K80280E-G-300PSI[2] 416.9 L CLD 23 MLTPL
K8040E-G-450PSI[3] 113 L CLD 23 MLTPL
K8080E-G-450PSI[3] 185.9 L CLD 23 MLTPL
K80120E-G-450PSI[3] 203.8 L CLD 23 MLTPL
K80160E-G-450PSI[3] 263.9 L CLD 23 MLTPL
K80200E-G-450PSI[3] 323.9 L CLD 23 MLTPL
K80240E-G-450PSI[3] 383.9 L CLD 23 MLTPL
K80280E-G-450PSI[3] 427.4 L CLD 23 MLTPL
K8040E-G-600PSI[3] 911.9 L CLD 23 MLTPL
K8080E-G-600PSI[3] 154.7 L CLD 23 MLTPL
K80120E-G-600PSI[3] 218.2 L CLD 23 MLTPL
K80160E-G-600PSI[3] 281.9 L CLD 23 MLTPL
K80200E-G-600PSI[3] 345.4 L CLD 23 MLTPL
K80240E-G-600PSI[3] 408.9 L CLD 23 MLTPL
K80280E-G-600PSI[3] 472.4 L CLD 23 MLTPL
K8040E-G-800PSI[3] 104.1 L CLD 23 MLTPL
K8080E-G-800PSI[3] 174.4 L CLD 23 MLTPL
K80120E-G-800PSI[3] 244.7 L CLD 23 MLTPL
K80160E-G-800PSI[3] 315 L CLD 23 MLTPL
K80200E-G-800PSI[3] 385.3 L CLD 23 MLTPL
K80240E-G-800PSI[3] 455.5 L CLD 23 MLTPL
K80280E-G-800PSI[3] 526 L CLD 23 MLTPL
K8040E-G-1000PSI[3] 106.5 L CLD 23 MLTPL
K8080E-G-1000PSI[3] 178.4 L CLD 23 MLTPL
K80120E-G-1000PSI[3] 250.3 L CLD 23 MLTPL
K80160E-G-1000PSI[3] 322.2 L CLD 23 MLTPL
K80200E-G-1000PSI[3] 394.1 L CLD 23 MLTPL
K80240E-G-1000PSI[3] 466 L CLD 23 MLTPL
K80280E-G-1000PSI[3] 538 L CLD 23 MLTPL
K8040E-G-1200PSI[3] 108.6 L CLD 23 MLTPL
K8080E-G-1200PSI[3] 181.6 L CLD 23 MLTPL
K80160E-G-1200PSI[3] 327.8 L CLD 23 MLTPL
K80120E-G-1200PSI[3] 254.5 L CLD 23 MLTPL
K80200E-G-1200PSI[3] 400.8 L CLD 23 MLTPL
K80240E-G-1200PSI[3] 473.8 L CLD 23 MLTPL
K80280E-G-1200PSI[3] 546.8 L CLD 23 MLTPL
K8040E-G-1400PSI[3] 119.8 L CLD 23 MLTPL
K8080E-G-1400PSI[3] 193.6 L CLD 23 MLTPL
K80120E-G-1400PSI[3] 269.3 L CLD 23 MLTPL
K80160E-G-1400PSI[3] 345.2 L CLD 23 MLTPL
K80200E-G-1400PSI[3] 420.9 L CLD 23 MLTPL
K80240E-G-1400PSI[3] 496.7 L CLD 23 MLTPL
K80280E-G-1400PSI[3] 572.4 L CLD 23 MLTPL
K8040E-G-1600PSI[3] 122.5 L CLD 23 MLTPL
K8080E-G-1600PSI[3] 200.5 L CLD 23 MLTPL
K80120E-G-1600PSI[3] 278.4 L CLD 23 MLTPL
K80160E-G-1600PSI[3] 356.6 L CLD 23 MLTPL
K80200E-G-1600PSI[3] 434.6 L CLD 23 MLTPL
K80240E-G-1600PSI[3] 512.5 L CLD 23 MLTPL
K80280E-G-1600PSI[3] 590.5 L CLD 23 MLTPL
K8040E-G-1800PSI[3] 128 L CLD 23 MLTPL
K8080E-G-1800PSI[3] 207.2 L CLD 23 MLTPL
K80120E-G-1800PSI[3] 286.2 L CLD 23 MLTPL
K80160E-G-1800PSI[3] 365.5 L CLD 23 MLTPL
K80200E-G-1800PSI[3] 444.6 L CLD 23 MLTPL
K80240E-G-1800PSI[3] 523.7 L CLD 23 MLTPL
K80280E-G-1800PSI[3] 602.8 L CLD 23 MLTPL
K4040E-300PSI[4] 27 L CLD 23 MLTPL
K4080E-300PSI[4] 56.3 L CLD 23 MLTPL
K40120E-300PSI[4] 516.1 L CLD 23 MLTPL
K40160E-300PSI[4] 6825.6 L CLD 23 MLTPL
K4040E-450PSI[4] 294.4 L CLD 23 MLTPL
K4080E-450PSI[4] 37.2 L CLD 23 MLTPL
K40120E-450PSI[4] 54.9 L CLD 23 MLTPL
K40160E-450PSI[4] 725.9 L CLD 23 MLTPL
K4040E-600PSI[4] 20.6 L CLD 23 MLTPL
K4080E-600PSI[4] 39.1 L CLD 23 MLTPL
K40120E-600PSI[4] 65.9 L CLD 23 MLTPL
K40160E-600PSI[4] 76.2 L CLD 23 MLTPL
K4040E-800PSI[4] 24 L CLD 23 MLTPL
K4080E-800PSI[4] 43.9 L CLD 23 MLTPL
K40120E-800PSI[4] 63.8 L CLD 23 MLTPL
K40160E-800PSI[4] 83.7 L CLD 23 MLTPL
K4040E-1000PSI[4] 24.7 L CLD 23 MLTPL
K4080E-1000PSI[4] 45.2 L CLD 23 MLTPL
K40120E-1000PSI[4] 65.7 L CLD 23 MLTPL
K40160E-1000PSI[4] 86.1 L CLD 23 MLTPL
K4040E-1200PSI[4] 25.7 L CLD 23 MLTPL
K4080E-1200PSI[4] 47.1 L CLD 23 MLTPL
K40120E-1200PSI[4] 68.5 L CLD 23 MLTPL
K40160E-1200PSI[4] 89.8 L CLD 23 MLTPL
K4021E-300PSI[4] 10.4 L CLD 23 MLTPL
K4021E-450PSI[4] 10.8 L CLD 23 MLTPL
K4021E-600PSI[4] 11.4 L CLD 23 MLTPL
K4021E-800PSI[4] 134.3 L CLD 23 MLTPL
K4021E-1000PSI[4] 138.1 L CLD 23 MLTPL
K4021E-1200PSI[4] 144 L CLD 23 MLTPL
K2540E-300PSI[4] 9.3 L CLD 23 MLTPL
K2540E-450PSI[4] 9.7 L CLD 23 MLTPL
K2540E-600PSI[4] 10.1 L CLD 23 MLTPL
K2540E-800PSI[4] 11.6 L CLD 23 MLTPL
K2540E-1000PSI[4] 12.5 L CLD 23 MLTPL
K2540E-1200PSI[4] 14.3 L CLD 23 MLTPL
K2521E-300PSI[4] 5.2 L CLD 23 MLTPL
K2521E-450PSI[4] 5.5 L CLD 23 MLTPL
K2521E-600PSI[4] 6.8 L CLD 23 MLTPL
K2521E-800PSI[4] 6.7 L CLD 23 MLTPL
K2521E-1000PSI[4] 7.2 L CLD 23 MLTPL
K2521E-1200PSI[4] 7.5 L CLD 23 MLTPL
K4040S-300PSI[5] 35.1 L CLD 23 MLTPL
K4080S-300PSI[5] 57.1 L CLD 23 MLTPL
K40120S-300PSI[5] 55.1 L CLD 23 MLTPL
K40160S-300PSI[5] 72.3 L CLD 23 MLTPL
K4040S-450PSI[5] 57.1 L CLD 23 MLTPL
K4080S-450PSI[5] 39.1 L CLD 23 MLTPL
K40120S-450PSI[5] 56.8 L CLD 23 MLTPL
K40160S-450PSI[5] 74.5 L CLD 23 MLTPL
K4040S-600PSI[5] 22.6 L CLD 23 MLTPL
K4080S-600PSI[5] 41.2 L CLD 23 MLTPL
K40120S-600PSI[5] 59.7 L CLD 23 MLTPL
K40160S-600PSI[5] 78.2 L CLD 23 MLTPL
K4040S-800PSI[5] 20.3 L CLD 23 MLTPL
K4080S-800PSI[5] 44.9 L CLD 23 MLTPL
K40120S-800PSI[5] 64.9 L CLD 23 MLTPL
K40160S-800PSI[5] 84.8 L CLD 23 MLTPL
K4040S-1000PSI[5] 25.7 L CLD 23 MLTPL
K4080S-1000PSI[5] 46.2 L CLD 23 MLTPL
K40120S-1000PSI[5] 66.7 L CLD 23 MLTPL
K40160S-1000PSI[5] 87.2 L CLD 23 MLTPL
K4040S-1200PSI[5] 26.8 L CLD 23 MLTPL
K4080S-1200PSI[5] 48.2 L CLD 23 MLTPL
K40120S-1200PSI[5] 69.6 L CLD 23 MLTPL
K40160S-1200PSI[5] 90.9 L CLD 23 MLTPL
K4021S-300PSI[5] 12.2 L CLD 23 MLTPL
K4021S-450PSI[5] 12.6 L CLD 23 MLTPL
K4021S-600PSI[5] 13.9 L CLD 23 MLTPL
K4021S-800PSI[5] 15.6 L CLD 23 MLTPL
K4021S-1000PSI[5] 16 L CLD 23 MLTPL
K4021S-1200PSI[5] 16.7 L CLD 23 MLTPL
K2540S-300PSI[5] 1.1 L CLD 23 MLTPL
K2540S-450PSI[5] 9.7 L CLD 23 MLTPL
K2540S-600PSI[5] 11.1 L CLD 23 MLTPL
K2540S-800PSI[5] 13.8 L CLD 23 MLTPL
K2540S-1000PSI[5] 13.2 L CLD 23 MLTPL
K2540S-1200PSI[5] 15.9 L CLD 23 MLTPL
HFF20[6] 53.3 L CLD 23 MLTPL
HFF40[6] 81.8 L CLD 23 MLTPL
HFF60[6] 111.7 L CLD 23 MLTPL

[1] Only products bearing the NSF Mark on the product, product packaging, and/or
    documentation shipped with the product are Certified.
[2] K8040S-G-300PSI, K8040S-G-450PSI, K8040S-G-600PSI, K8040S-G-800PSI, K8040S-G-1000PSI,
    K8040S-G-1200PSI, K8040S-G-1400PSI, K8040S-G-1600PSI, and K8040S-G-1800PSI are certified
    for a minimum daily flow of 24000 liters per day.
    
    K8080S-G-300PSI, K8080S-G-450PSI, K8080S-G-600PSI, K8080S-G-800PSI, K8080S-G-1000PSI,
    K8080S-G-1200PSI, K8080S-G-1400PSI, K8080S-G-1600PSI, and K8080S-G-1800PSI are certified
    for a minimum daily flow of 48000 liters per day.
    
    K80120S-G-300PSI, K80120S-G-450PSI, K80120S-G-600PSI, K80120S-G-800PSI,
    K80120S-G-1000PSI, K80120S-G-1200PSI, K80120S-G-1400PSI, K80120S-G-1600PSI, and
    K80120S-G-1800PSI are certified for a minimum daily flow of 72000 liters per day.
    
    K80160S-G-300PSI, K80160S-G-450PSI, K80160S-G-600PSI, K80160S-G-800PSI,
    K80160S-G-1000PSI, K80160S-G-1200PSI, K80160S-G-1400PSI, K80160S-G-1600PSI, and
    K80160S-G-1800PSI are certified for a minimum daily flow of 96000 liters per day.
    
    K80200S-G-300PSI, K80200S-G-450PSI, K80200S-G-600PSI, K80200S-G-800PSI,
    K80200S-G-1000PSI, K80200S-G-1200PSI, K80200S-G-1400PSI, K80200S-G-1600PSI, and
    K80200S-G-1800PSI are certified for a minimum daily flow of 120000 liters per day.
    
    K80240S-G-300PSI, K80240S-G-450PSI, K80240S-G-600PSI, K80240S-G-800PSI,
    K80240S-G-1000PSI, K80240S-G-1200PSI, K80240S-G-1400PSI, K80240S-G-1600PSI, and
    K80240S-G-1800PSI are certified for a minimum daily flow of 144000 liters per day.
    
    K80280S-G-300PSI, K80280S-G-450PSI, K80280S-G-600PSI, K80280S-G-800PSI,
    K80280S-G-1000PSI, K80280S-G-1200PSI, K80280S-G-1400PSI, K80280S-G-1600PSI, and
    K80280S-G-1800PSI are certified for a minimum daily flow of 168000 liters per day.
    
    Certified for use in municipal water treatment plants only.
[3] K8040E-G-300PSI, K8040E-G-450PSI, K8040E-G-600PSI, K8040E-G-800PSI, K8040E-G-1000PSI,
    K8040E-G-1200PSI, K8040E-G-1400PSI, K8040E-G-1600PSI and K8040E-G-1800PSI are certified
    for a minimum daily flow of 24000 liters per day.
    
    K8080E-G-300PSI, K8080E-G-450PSI, K8080E-G-600PSI, K8080E-G-800PSI, K8080E-G-1000PSI,
    K8080E-G-1200PSI, K8080E-G-1400PSI, K8080E-G-1600PSI and K8080E-G-1800PSI are certified
    for a minimum daily flow of 48000 liters per day.
    
    K80120E-G-300PSI, K80120E-G-450PSI, K80120E-G-600PSI, K80120E-G-800PSI,
    K80120E-G-1000PSI, K80120E-G-1200PSI, K80120E-G-1400PSI, K80120E-G-1600PSI and
    K80120E-G-1800PSI are certified for a minimum daily flow of 72000 liters per day.
    
    K80160E-G-300PSI, K80160E-G-450PSI, K80160E-G-600PSI, K80160E-G-800PSI,
    K80160E-G-1000PSI, K80160E-G-1200PSI, K80160E-G-1400PSI, K80160E-G-1600PSI and
    K80160E-G-1800PSI are certified for a minimum daily flow of 96000 liters per day.
    
    K80200E-G-300PSI, K80200E-G-450PSI, K80200E-G-600PSI, K80200E-G-800PSI,
    K80200E-G-1000PSI, K80200E-G-1200PSI, K80200E-G-1400PSI, K80200E-G-1600PSI and
    K80200E-G-1800PSI are certified for a minimum daily flow of 120000 liters per day.
    
    K80240E-G-300PSI, K80240E-G-450PSI, K80240E-G-600PSI, K80240E-G-800PSI,
    K80240E-G-1000PSI, K80240E-G-1200PSI, K80240E-G-1400PSI, K80240E-G-1600PSI and
    K80240E-G-1800PSI are certified for a minimum daily flow of 144000 liters per day.
    
    K80280E-G-300PSI, K80280E-G-450PSI, K80280E-G-600PSI, K80280E-G-800PSI,
    K80280E-G-1000PSI, K80280E-G-1200PSI, K80280E-G-1400PSI, K80280E-G-1600PSI and
    K80280E-G-1800PSI are certified for a minimum daily flow of 168000 liters per day.
    
    Certified for use in municipal water treatment plants only.
[4] K2521E-300PSI, K2521E-450PSI, K2521E-600PSI, K2521E-800PSI, K2521E-1000PSI and
    K2521E-1200PSI are certified for a minimum daily flow of 1500 liters per day.
    
    K2540E-300PSI, K4021E-300PSI, K2540E-450PSI, K4021E-450PSI, K2540E-600PSI,
    K4021E-600PSI, K2540E-800PSI, K4021E-800PSI, K2540E-1000PSI, K4021E-1000PSI,
    K2540E-1200PSI and K4021E-1200PSI are certified for a minimum daily flow of 3000 liters
    per day.
    
    K4040E-300PSI, K4040E-450PSI, K4040E-600PSI, K4040E-800PSI, K4040E-1000PSI and
    K4040E-1200PSI are certified for a minimum daily flow of 6000 liters per day.
    
    K4080E-300PSI, K4080E-450PSI, K4080E-600PSI, K4080E-800PSI, K4080E-1000PSI and
    K4080E-1200PSI are certified for a minimum daily flow of 12000 liters per day.
    
    K40120E-300PSI, K40120E-450PSI, K40120E-600PSI, K40120E-800PSI, K40120E-1000PSI and
    K40120E-1200PSI are certified for a minimum daily flow of 18000 liters per day.
    
    K40160E-300PSI, K40160E-450PSI, K40160E-600PSI, K40160E-800PSI, K40160E-1000PSI and
    K40160E-1200PSI are certified for a minimum daily flow of 24000 liters per day.
    
    Certified for use in municipal water treatment plants only.
[5] K2540S-300PSI, K4021S-300PSI, K2540S-450PSI, K4021S-450PSI, K2540S-600PSI,
    K4021S-600PSI, K2540S-800PSI, K4021S-800PSI, K2540S-1000PSI, K4021S-1000PSI,
    K2540S-1200PSI and K4021S-1200PSI are certified for a minimum daily flow of 3000 liters
    per day.
    
    K4040S-300PSI, K4040S-450PSI, K4040S-600PSI, K4040S-800PSI, K4040S-1000PSI and
    K4040S-1200PSI are certified for a minimum daily flow of 6000 liters per day.
     
    K4080S-300PSI, K4080S-450PSI, K4080S-600PSI, K4080S-800PSI, K4080S-1000PSI and
    K4080S-1200PSI are certified for a minimum daily flow of 12000 liters per day.
     
    K40120S-300PSI, K40120S-450PSI, K40120S-600PSI, K40120S-800PSI, K40120S-1000PSI and
    K40120S-1200PSI are certified for a minimum daily flow of 18000 liters per day.
     
    K40160S-300PSI, K40160S-450PSI, K40160S-600PSI, K40160S-800PSI, K40160S-1000PSI and
    K40160S-1200PSI are certified for a minimum daily flow of 24000 liters per day.
     
    Certified for use in municipal water treatment plants only.
[6] HFF20 is certified for a minimum daily flow of 12000 liters per day.
    HFF40 is certified for a minimum daily flow of 18000 liters per day.
    HFF60 is certified for a minimum daily flow of 24000 liters per day.
    
    Certified for use in municipal water treatment plants only.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



 
Shandong Jozzon New Materials Co., Ltd. 
No.56 Shengxing Road
Kenli Economic Development 
Dongying, Shandong 257500 
China 
400 8890 899 
86 546 608 2234
Visit this company's website


Facility : Shandong, China

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Reverse Osmosis Element
JBW-4040-FR 4" x 40" CLD 23 MLTPL
JBW-4040-HF 4" x 40" CLD 23 MLTPL
JBW-8040-365/34-FR 8" x 40" CLD 23 MLTPL
JBW-8040-380/34-FR 8" x 40" CLD 23 MLTPL
JBW-8040-400-HF 8" x 40" CLD 23 MLTPL
JBW-8040-400/34-FR 8" x 40" CLD 23 MLTPL
JBW-8040-400/34-HF 8" x 40" CLD 23 MLTPL
JRW-4040-HF 4" x 40" CLD 23 MLTPL
JRW-8040-400-HF 8" x 40" CLD 23 MLTPL

[2] JRW-2521 is certified for a minimum daily flow of 237 gallons.
    JRW-2540 is certified for a minimum daily flow of 750 gallons.
    BENC-4021 and BENC-4021-L are certified for a minimum daily flow of 1000 gallons.
    JRW-4021 is certified for a minimum daily flow of 1100 gallons.
    JEC-4021 is certified for a minimum daily flow of 1200 gallons.
    JBW-4040-FR is certified for a minimum daily flow of 2200 gallons.
    JRW-4040-HR is certified for a minimum daily flow of 2300 gallons.
    JBW-4040 and BENC-4040 are certified for a minimum daily flow of 2400 gallons.
    JRW-4040 and BENC-4040-L are certified for a minimum daily flow of 2500 gallons.
    JBW-4040-HF is certified for a minimum daily flow of 2700 gallons.
    JEC-4040 is certified for a minimum daily flow of 2800 gallons.
    JRW-4040-HF is certified for a minimum daily flow of 3200 gallons.
    JBW-8040-365/34-FR is certified for a minimum daily flow of 9000 gallons.
    JBW-8040-380/34-FR and BENC-8040 are certified for a minimum daily flow of 9500 gallons.
    JBW-8040 is certified for a minimum daily flow of 9800 gallons.
    JBW-8040-400/34-FR and BENC-8040-L are certified for a minimum daily flow of 10000
    gallons.
    JBW-8040-400/34-HF is certified for a minimum daily flow of 10500 gallons.
    JBW-8040-400-HF is certified for a minimum daily flow of 10600 gallons.
    JRW-8040 is certified for a minimum daily flow of 11000 gallons.
    JRW-8040-400-HR is certified for a minimum daily flow of 11500 gallons.
    JRW-8040-400-HF is certified for a minimum daily flow of 12500 gallons.
    JRW-8040-430 is certified for a minimum daily flow of 13200 gallons.


 
Shanghai Hajime Advanced Material Technology Co., Ltd. 
633 Qinwan Road
Jinshan District 
Shanghai 
China 
86 135 2430 6399


Facility : Shanghai, China

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Valves[G]
DRAIN VALVE/ AP23374F 3/4" - 14" C. HOT MLTPL

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



 
Shanghai Sishun Technology Co., Ltd. 
No. 599 Wan Zhen Road
Jiading District, Shanghai 
201800 
China 
18948987992


Facility : # 1 China

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Fittings [G]
VEVOR PF6 1/2" - 2" C. HOT BRASS
VEVOR PF6m[1] 1/2" - 2" C. HOT BRASS

[1] VEVOR PF6m uses alloy C69300.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

Valves [G]
VEVOR PEX Ball Valve (PF5-Q) 1/2" - 1 1/4" C. HOT MLTPL
VEVOR PEX Ball Valve (PF5m-Q)[2] 1/2" - 1 1/4" C. HOT MLTPL

[2] For trade names, the use of "m" in trade name indicates use of C69300 alloy.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



 
Shawmut Park Avenue LLC 
1821 North Park Avenue
Burlington, NC 27217 
United States 
336-221-2144
Visit this company's website


Facility : Burlington, NC

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Filtration Devices/Components[1]
RO-Flow HP [2] CLD 23 PET
RO-Flow LP1 [2] CLD 23 PET
RO-Flow LP2 [2] CLD 23 PET
RO-Flow LP3 [2] CLD 23 PET
RO-Flow LP8 [3] CLD 23 PET

[1] The smallest application is for a device that holds a minimum 10 L of water and a
    maximum SA of 123,800 sq. in. The product has a minimum flow of 1,750 L/day.
[2] RO-Flow HP, RO-Flow LP1, RO-Flow LP2, and RO-Flow LP3 are certified for a thickness of
    8-12 mils.
[3] RO-Flow LP8 is certified for a thickness of 13-20 mils.



 
Shie Yu Machine Parts Industrial Co. Ltd 
No. 336 - 16 Hai Pin Road
Ching Shui Chen, Taichung 
Taiwan 
886 4 626 6926


Facility : Kaohsiung, Taiwan

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Valves[G]
PVC Safety Block True Union Ball Valve 1/2" - 6" CLD 23 MLTPL

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



 
Sino-membrane (Beijing) Technology Co., Ltd. 
Room 2101, Unit 1, 18th Flr, Bldg 1
Yard 4, Changtong Road 
Chaoyang District, Beijing 100024 
China 
86 108 244 9161
Visit this company's website


Facility : # 1 China

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Reverse Osmosis Element[1] [2] [3]
SNBW-4040-FR 4" x 40" CLD 23 MLTPL
SNBW-8040-FR365/36 8" x 40" CLD 23 MLTPL
SNBW-8040-FR400/34 8" x 40" CLD 23 MLTPL
SNBW-XFR400/34 8" x 40" CLD 23 MLTPL
SNHW8040-FR400/34 8" x 40" CLD 23 MLTPL
SNNF-4040 4" x 40" CLD 23 MLTPL
SNNF-8040 8" x 40" CLD 23 MLTPL
SNNF270-4040 4" x 40" CLD 23 MLTPL
SNNF270-8040/34 8" x 40" CLD 23 MLTPL
SNNF90-4040 4" x 40" CLD 23 MLTPL
SNNF90-8040/34 8" x 40" CLD 23 MLTPL

[1] SNLE-2521 and SNSW-2521 models are flushed at a flow rate of 6.2 gallons per minute for
    90 minutes with DI water.
    SNSW-2540 and SNLE-2540 models are flushed at a flow rate of 6.5 gallons per minute for
    90 minutes with DI water.
    SNSW-4021 and SNLE-4021 models are flushed at a flow rate of 6.9 gallons per minute for
    90 minutes with DI water.
    SNSE-4040 is flushed at a flow rate of 7.7 gallons per minute for 90 minutes with DI
    water.
    SNBW-4040 and SNBW-4040-FR models are flushed at a flow rate of 7.8 gallons per minute
    for 90 minutes with DI water.
    SNLE-4040 is flushed at a flow rate of 7.9 gallons per minute for 90 minutes with DI
    water.
    SNSW-4040 is flushed at a flow rate of 8 gallons per minute for 90 minutes with DI
    water.
    LE-4040 is flushed at a flow rate of 8.1 gallons per minute for 90 minutes with DI
    water.
    SNBW-8040-400/34 is flushed at a flow rate of 8.2 gallons per minute for 90 minutes with
    DI water.
    SNNF270-4040, SNBW-XFR400/34 and SNNF-4040 models are flushed at a flow rate of 8.3
    gallons per minute for 90 minutes with DI water.
    SNNF90-4040 is flushed at a flow rate of 8.4 gallons per minute for 90 minutes with DI
    water.
    SNLE-8040 is flushed at a flow rate of 10 gallons per minute for 90 minutes with DI
    water.
    FR-8040-365/36 is flushed at a flow rate of 10.2 gallons per minute for 90 minutes with
    DI water.
    FR-8040-400/34 and SNSW-8040 models are flushed at a flow rate of 10.3 gallons per
    minute for 90 minutes with DI water.
    SNBW-8040, SNNF270-8040/34 and SNNF90-8040/34 models are flushed at a flow rate of 10.5
    gallons per minute for 90 minutes with DI water.
    BW-8040 and SNHW8040-FR400/34 models are flushed at a flow rate of 10.8 gallons per
    minute for 90 minutes with DI water.
    LE-8040 and SNNF-8040 models are flushed at a flow rate of 10.9 gallons per minute for
    90 minutes with DI water.
[2] SNLE-2521 and SNSW-2521 models are certified to a minimum daily flow of 288 gallons per
    day.
    SNLE-2540 is certified for a minimum daily flow of 760 gallons per day.
    SNSW-2540 is certified for a minimum daily flow of 770 gallons per day.
    SNSW-4021 is certified for a minimum daily flow of 1160 gallons per day.
    SNLE-4021 is certified for minimum daily flow of 1200 gallons per day.
    SNBW-4040-FR is certified for a minimum daily flow of 2200 gallons per day.
    SNBW-4040 is certified for a minimum daily flow of 2400 gallons per day.
    SNLE-4040, LE-4040 and SNNF270-4040 models are certified for a minimum daily flow of
    2800 gallons per day.
    SNSW-4040 and SNNF90-4040 models are certified for a minimum daily flow of 2900 gallons
    per day.
    SNNF-4040 is certified for a minimum daily flow of 3000 gallons per day.
    SNSE-4040 is certified for a minimum daily flow of 3300 gallons per day.
    SNBW-8040-FR365/36 is certified for a minimum daily flow of 9500 gallons per day.
    BW-8040 and SNBW-8040-FR400/34 models are certified for a minimum daily flow of 10000
    gallons per day.
    SNLE-8040 is certified for a minimum daily flow of 10080 gallons per day.
    SNNF270-8040/34 is certified for a minimum daily flow of 10300 gallons per day.
    SNNF90-8040/34 is certified for a minimum daily flow of 10400 gallons per day.
    SNBW-8040 and SNBW-8040-400/34 are certified for a minimum daily flow of 10600 gallons
    per day.
    SNBW-XFR400/34 is certified for a minimum daily flow of 10800 gallons per day.
    LE-8040 is certified for a minimum daily flow of 11000 gallons per day.
    SNNF-8040 is certified for a minimum daily flow of 11600 gallons per day.
    SNHW8040-FR400/34 is certified for a minimum daily flow of 12500 gallons per day.
    SNSW-8040 is certified for a minimum daily flow of 13300 gallons per day.
[3] Abbreviations at the beginning of the trade names indicate the following:
    SW - Seawater
    LE - Low Pressure
    BW - Brackish Water
    FR - Anti-Pollution
    NF - High Output



 
Sistemas de Filtrado y Tratamiento de Fluidos S.L. 
Poligono Armentera, 87
Monzon, Huesca 22400 
Spain 
34 97 440 15 48
Visit this company's website


Facility : Monzon, Spain

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Filtration Devices/Components[1]
FMA20XX[2] 3" - 14" CLD 23 MLTPL
FMA90XX[3] 4" - 14" CLD 23 MLTPL

[1] Certified for a minimun daily flow of 35,000 Liters per day.
[2] XX indicates connection size between 3-14 inches.
[3] XX indicates connection size between 4-14 inches.

[4] L suffix indicates in-line configuration in the FMA90XX series.
NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
      documentation shipped with the product are Certified.


 
Southern Valve & Fitting USA, Inc. 
1851 Longleaf Blvd
Lake Wales, FL 33859 
United States 
305-757-8455


Facility : Shandong, China

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Fire Hydrants
Center-Line Butterfly Valve/1040 3" - 24" D. HOT MLTPL
Center-Line Butterfly Valve/1041 3" - 24" D. HOT MLTPL
Center-Line Butterfly Valve/1042 3" - 24" D. HOT MLTPL
Double Eccentric Butterfly Valve/1043 30" - 96" D. HOT MLTPL
Y-Strainer/852 50 - 2000 mm D. HOT MLTPL



 
SP1 Fittings Inc. 
1441 East Island Hwy E.
Nanoose Bay, BC V9P 9A3 
Canada 
250-954-7510
Visit this company's website


Facility : Dongying, China

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Fittings
SP1[1] 3" - 8" CLD 23 PE

[1] Certified for the following models:
    
    Injection Molded Saddle Branches
    MBS0207 2" SDR7 IPS SDL
    MBS0307 3" SDR7 IPS SDL
    MBS0407 4" SDR7 IPS SDL
    MBS0607 6" SDR7 IPS SDL
    MBS0807 8" SDR7 IPS SDL
    
    MBS0209 2" SDR9 IPS SDL
    MBS0309 3" SDR9 IPS SDL
    MBS0409 4" SDR9 IPS SDL
    MBS0609 6" SDR9 IPS SDL
    MBS0809 8" SDR9 IPS SDL
    
    MBS0211 2" SD11 IPS SDL
    MBS0311 3" SDR11 IPS SDL
    MBS0411 4" SDR11 IPS SDL
    MBS0611 6" SDR11 IPS SDL
    MBS0811 8" SDR11 IPS SDL
    
    Injection Molded Butt Fusion Saddles
    MBS0217 2" SDR17 IPS SDL
    MBS0317 3" SDR17 IPS SDL
    MBS0417 4" SDR17 IPS SDL
    MBS0617 6" SDR17 IPS SDL
    MBS0817 8" SDR17 IPS SDL



 
Spears Manufacturing Company 
15853 Olden Street
P.O. Box 9203 
Sylmar, CA 91342 
United States 
818-364-1611
Visit this company's website


Facility : Sylmar, CA

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Valves[G]
FLO PVC Utility Ball Valves 1/2" - 2" CLD 23 MLTPL
GF CPVC True Union Ball Valves with EPDM 1/2" - 4" C. HOT MLTPL
GF PVC True Union Ball Valves 1/2" - 4" CLD 23 MLTPL
GF PVC Utility Ball Valves 1/2" - 2" CLD 23 MLTPL
NETAFIM PVC Utility Ball Valves 1/2" - 2" CLD 23 MLTPL
Spears CPVC Butterfly Valves w/ EPDM seat 1/2" - 12" C. HOT CPVC
Spears PVC Butterfly Valves w/ EPDM Seat 1 1/2" - 12" CLD 23 PVC

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



 
Specialty Mfg. Co. 
5858 Centerville Road
St. Paul, MN 55127 
United States 
612-653-0599
Visit this company's website


Facility : St. Paul, MN

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Ball Valves [G]
FP 637-(1)(2)(1)(2)-(4)(5)[2] [1] CLD 23 MLTPL
FP 639-(1)(2)(3)(2)(3)(2)-(4)(5)[3] [1] CLD 23 MLTPL
WFP 226-(1)(2)(1)(2)-(4)(5)[5] [1] CLD 23 MLTPL
WFP 326-(1)(2)(3)(2)(3)(2)-(4)(5)[6] [1] CLD 23 MLTPL
WFP 637-(1)(2)(1)(2)-(4)(5)[2] [1] CLD 23 MLTPL
WFP 638-(1)(2)(1)(2)-(4)(5)[8] [1] CLD 23 MLTPL
WFP 639-(1)(2)(3)(2)(3)(2)-(4)(5)[3] [1] CLD 23 MLTPL
WFP 657-(1)(2)(1)(2)-(4)(5)[8] [1] CLD 23 MLTPL
WFP 658-(1)(2)(3)(2)-(4)(5) [9] [1] CLD 23 MLTPL

[1] Certified for 1 unit per 0.25 L. Product requires a five minute flush.
[2] Suffixes indicate optional sizes and fitting types:
    Material Options: FP – Black Glass Filled Polypropylene, PVC - Gray PVC, WPVC - White
    PVC, WFP - White Glass Filled Polypropylene 
    (1) Inlet/Outlet end: 2 - 1/8" (2/16), 4 - 1/4" (4/16), 6 - 3/8" (6/16), 8 - 1/2" (8/16)
    (2) Fitting Type: F - Female NPT (1/4", 3/8", 1/2"), M - Male NPT (1/8", 1/4", 3/8",
        1/2"), BIB - Smooth (Stem) Barb (3/8"), B - Hose Barb (1/8", 1/4", 3/8", 1/2"),
        SMC - Push-to-connect (1/4", 3/8", 1/2"), TB - Tapered Barb (3/8", 5/8"),
        4CJ - 1/4" Compression JACO, 6CJ - 3/8" Compression JACO
    (4) Seal Type: E - Ethylene Propylene
    (5) Handle and Panel Mount Options (non-wetted)
[3] Suffixes indicate optional sizes and fitting types:
    Material Options: FP - Black Polypropylene, WFP - White Polypropylene, PVC - Gray PVC,
    WPVC - White PVC
    (1) Inlet/Outlet end: 2 - 1/8" (2/16), 4 - 1/4" (4/16), 6 - 3/8" (6/16), 8 - 1/2" (8/16)
    (2) Fitting Type: F - Female NPT (1/4", 3/8", 1/2"), M - Male NPT (1/8", 1/4", 3/8"),
        BIB - Smooth (Stem) Barb (3/8"), CjG - Collets John Guest, B - Hose Barb (1/8'",
        1/4", 3/8", 1/2"), SMC - Push-to-connect (1/4", 3/8"), TB - Tapered Barb, 
        DM - DM Fit Collets, SSR - Female NPT w/Stainless Steel Support Ring (1/2")
    (3) Outlet end (3-way only): 2 - 1/8" (2/16), 4 - 1/4" (4/16), 6 - 3/8" (6/16), 8 - 1/2"
        (8/16)
    (4) Seal Type: E - Ethylene Propylene
    (5) Handle and Panel Mount Options (non-wetted)
[4] Suffixes indicate optional sizes and fitting types:
    Material Options: PVC - Gray PVC
    (1) Inlet/Outlet end: (4 - 1/4" (4/16), 6 - 3/8" (6/16))
    (2) Fitting Type: (F - Female NPT (1/4", 3/8"), M - Male NPT (1/4", 3/8"))
    (3) Outlet end (3-way only): (4 - 1/4" (4/16), 6 - 3/8" (6/16)
    (4) Seal Type: (E - Ethylene Propylene)
    (5) Handle and Panel Mount Options (non-wetted)
[5] Suffixes indicate optional sizes and fitting types:
    Material Options: WFP - White Polypropylene, PVC - Gray PVC, WPVC - White PVC
    (1) Inlet/Outlet end: 2 - 1/8" (2/16), 4 - 1/4" (4/16), 5 - 5/16" (5/16),
        6 - 3/8" (6/16), 8 - 1/2" (8/16)
    (2) Fitting Type: F - Female NPT (1/8”, 1/4"), M - Male NPT (1/8”, 1/4”), BIB - Smooth
        (Stem) Barb (3/8", 1/2"), CjG - Collets John Guest, B - Hose Barb (1/8", 1/4",
    5/16",
        3/8", 1/2"), SMC - Push-to-connect (1/4", 3/8"), DM - DM Fit Collets
    (4) Seal Type: E - Ethylene Propylene
    (5) Handle and Panel Mount Options (non-wetted)
[6] Suffixes indicate optional sizes and fitting types:
    Material Options: WFP - White Polypropylene, PVC - Gray PVC, WPVC - White PVC
    (1) Inlet/Outlet end: 2 - 1/8" (2/16), 4 - 1/4" (4/16), 5 - 5/16" (5/16),
        6 - 3/8" (6/16), 8 - 1/2" (8/16)
    (2) Fitting Type: F - Female NPT (1/8", 1/4"), M - Male NPT (1/8", 1/4"), BIB - Smooth
        (Stem) Barb (3/8", 1/2"), CjG - Collets John Guest, B - Hose Barb (1/8", 1/4",
    5/16",
        3/8", 1/2"), SMC - Push-to-connect (1/4", 3/8"), DM - DM Fit Collets 
    (3) Outlet end (3-way only): (2 - 1/8" (2/16), 4 - 1/4" (4/16), 5 - 5/16" (5/16), 
        6 - 3/8" (6/16), 8 - 1/2" (8/16)
    (4) Seal Type: E - Ethylene Propylene
    (5) Handle and Panel Mount Options (non-wetted)
[7] Suffixes indicate optional sizes and fitting types:
    Material Options: PVC - Gray PVC
    (1) Inlet/Outlet end: 4 - 1/4" (4/16), 6 - 3/8" (6/16)
    (2) Fitting Type: F - Female NPT (1/4", 3/8"), M - Male NPT (1/4", 3/8")
    (4) Seal Type: E - Ethylene Propylene
    (5) Handle and Panel Mount Options (non-wetted)
[8] Suffixes indicate optional sizes and fitting types:
    Material Options: WFP - White Polypropylene, PVC - Gray PVC, WPVC - White PVC
    (1) Inlet/Outlet end: 2 - 1/8" (2/16), 4 - 1/4" (4/16), 6 - 3/8" (6/16), 8 - 1/2" (8/16)
    (2) Fitting Type: F - Female NPT (1/4", 3/8", 1/2"), M - Male NPT (1/8", 1/4", 3/8"),
        BIB - Smooth (Stem) Barb (3/8"), CjG - Collets John Guest, B - Hose Barb
        (1/8", 1/4", 3/8", 1/2"), SMC - Push-to-connect (1/4", 3/8"), TB - Tapered Barb,
        DM - DM Fit Collets, SSR - Female NPT w/Stainless Steel Support Ring (1/2")
    (4) Seal Type: E - Ethylene Propylene
    (5) Handle and Panel Mount Options (non-wetted)
[9] Suffixes indicate optional sizes and fitting types: 
    Material Options: WFP - White Polypropylene, PVC - Gray PVC, WPVC - White PVC
    (1) Inlet end: 4 - 1/4: (4/16)
    (2) Fitting Type: F - Female NPT (1/4"), SMC - Push-to-connect (1/4", 3/8")
    (3) Outlet end 4 - 1/4" (4/16), 6 - 3/8" (6/16)
    (4) Seal Type: E - Ethylene Propylene
    (5) Handle and Panel Mount Options (non-wetted)
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

Valves [G]
WFP CHK 426-(1)(2)(3)(2)(3)(2)-(4)(5)(7)[10] [1] CLD 23 MLTPL

[1] Certified for 1 unit per 0.25 L. Product requires a five minute flush.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.
[10] Suffixes indicate optional sizes and fitting types:
     Material Options: WFP - White Polypropylene, PVC - Gray PVC, WPVC - White PVC
     (1) Inlet/Outlet end: 2 - 1/8" (2/16), 4 - 1/4" (4/16), 5 - 5/16" (5/16), 6 - 3/8"
         (6/16), 8 - 1/2" (8/16)
     (2) Fitting Type: F - Female NPT (1/8", 1/4"), M - Male NPT (1/8", 1/4"), BIB - Smooth
         (Stem) Barb (3/8"), CjG - Collets John Guest, B - Hose Barb (1/8", 1/4", 5/16",
     3/8",
         1/2"), SMC - Push-to-connect (1/4", 3/8"), DM - DM Fit Collets 
     (3) Outlet end (3-way only): 2 - 1/8" (2/16), 4 - 1/4" (4/16), 5 - 5/16" (5/16), 6 -
     3/8" 
         (6/16), 8 - 1/2" (8/16)
     (4) Seal Type: E - Ethylene Propylene
     (5) Handle and Panel Mount Options (non-wetted)
     (7) Spring and Ball Material: 1/3# SS Spring and SS Ball (1/3 psi), 1/3#, TEF SS Spring
         and PTFE Ball (1/3 psi), None SS Spring and SS Ball (1 psi), TEF SS Spring and PTFE
         Ball (1 psi), 1.5# SS Spring and SS Ball (1.5 psi), 1.5#, TEF SS Spring and PTFE
     Ball
         (1.5 psi), 3# SS Spring and SS Ball (3 psi), 3#, TEF SS Spring and PTFE Ball (3
     psi),
         5# SS Spring and SS Ball(5 psi), 5#, TEF SS Spring and PTFE Ball (5 psi), 7# SS
         Spring and SS Ball (7 psi), 7#, TEF SS Spring and PTFE Ball (7 psi), 10# SS Spring
         and SS Ball (10 psi), 10#, TEF SS Spring and PTFE Ball (10 psi), 12# SS Spring and
         SS Ball (12 psi), 12#, TEF SS Spring and PTFE Ball (12 psi), 15# SS Spring and SS
         Ball (15 psi), 15#, TEF SS Spring and PTFE Ball (15 psi)
[11] Suffixes indicate optional sizes and fitting types:
     Material Options: PVC - Gray PVC               
     (1) Inlet/Outlet end: 2 - 1/8" (2/16), 4 - 1/4" (4/16), 6 - 3/8" (6/16), 8 - 1/2" (8/16)
     (2) Fitting Type: F - Female NPT (1/4", 3/8", 1/2"), M - Male NPT (1/8", 1/4", 3/8"),
         BIB - Smooth (Stem) Barb (3/8"), CjG - Collets John Guest, B - Hose Barb
         (1/8", 1/4", 3/8", 1/2"), SMC - Push-to-connect (1/4", 3/8"), TB - Tapered Barb,
         DM - DM Fit Collets, SSR - Female NPT w/Stainless Steel Support Ring (1/2")        
     (3) Outlet end (3-way only): 4 - 1/4" (4/16), 6 - 3/8" (6/16), 8 - 1/2" (8/16),
         12 - 3/4" (12/16)                  
     (4) Seal Type: E - Ethylene Propylene
     (5) Handle and Panel Mount Options (non-wetted) 
     (6) T-Link End Fitting Type: M - NPT (1/2" Male x 1/2" Male, 3/4" Male x 3/4" Male),
         NPSM - National Pipe Straight Mechanical (1/2" Female x 1/2" Male), QEST -
         QEST brand system (includes plastic nut, stainless steel ring and cone)
         (1/4", 3/8", 1/2")



 
Spin S.A. de C. V. 
2DA Cerrada De Pilares No 11 Las águilas
Álvaro Obregón 
Mexico City, 01710 
Mexico 
52 55 559 30447


Facility : Ciudad de México, Mexico

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Chemical Feeders[1] [2] [G]
Provitab 3 Model 2C Chlorinator [3] CLD 23 MLTPL
Provitab 3 Model 4C Chlorinator [3] CLD 23 MLTPL
Provitab 3 Model 8C Chlorinator [3] CLD 23 MLTPL
Provitab 3 Model 12C Chlorinator [3] CLD 23 MLTPL
Provitab 3 Model 16C Chlorinator [3] CLD 23 MLTPL
Provitab 3 Model 20C Chlorinator [3] CLD 23 MLTPL
Provitab 3 Model 24C Chlorinator [3] CLD 23 MLTPL
Provitab 3 Model 28C Chlorinator [3] CLD 23 MLTPL

[1] Certification of this product has been performed to the health effects requirements of
    NSF/ANSI Standard 61, which assesses the acceptability of potential extractants  from
    the chemical feeder when used with the manufacturer's recommended use chemicals.  Any
    modifications including the use of chemicals other than those recommended by the
    manufacturer or chemicals that are not compliant to NSF/ANSI Standard 60 will void the
    NSF certification for this feeder. 
[2] Certified for use with Provichlor TAB 3 tablets when used in compliance with their
    NSF/ANSI Standard 60 Listing. 
[3] Certified for a minimum of 28,800 liters of water treated per day.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



 
SpiroPure 
2256 S 1250 W
Woods Cross, UT 84087 
United States 
801-953-0070
Visit this company's website


Facility : C China

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Reverse Osmosis Element
SP-FR4040[1] [2] 4" x 40" CLD 23 MLTPL
SP-FR4040-HR[3] [4] 4" x 40" CLD 23 MLTPL
SP-FR8040[3] [4] 8" x 40" CLD 23 MLTPL

[1] SP-BW4040, SP-UL4040 and SP-XL4040 are certified for a minimum flow of 2000 gallons per
    day. 
        
    SP-FR4040 is certified for a minimum flow of 1840 gallons per day.
        
    Model SP-SW4021 is certified for a minimum daily flow of 560 gallons.
        
    Models SP-BW4021, SP-UL4021, SP-XL4021 and SP-SW4021-HR are certified for a minimum
    daily flow of 800 gallons
        
    Model SP-XL4021-HR is certified for a minimum daily flow of 1120 gallons
        
    Model SP-SW4040 is certified for a minimum daily flow of 1360 gallons
        
    Model SP-SW4040-HR is certified for a minimum daily flow of 2000 gallons
        
    Model BW 4040 XPL+ is certified for a minimum daily flow of 2480 gallons
        
    Model SP-SW2521 is certified for a minimum daily flow of 240 gallons.
    
    Models SP-BW2521,SP-UL2521, SP-XL2521 and SP-SW2521-HR are certified for a minimum daily
    flow of 320 gallons.
        
    Model SP-XL2521-HR is certified for a minimum daily flow of 440 gallons.
        
    Model SP-SW2540 is certified for a minimum daily flow of 480 gallons.
        
    Models SP-BW2540,SP-UL2540, SP-XL2540 and SP-SW2540-HR are certified for a minimum daily
    flow of 640 gallons.
        
    Model SP-XL2540-HR is certified for a minimum daily flow of 880 gallons.
[2] Product requires flushing with deionized water at 2.628 liters per minute for 1 hour
    prior to use.
[3] Trade names SP-FR4040-HR, SP-BW4040-HR, SP-UL4040-HR, SP-XL4040-PLUS and SP-SW4040-PLUS
    require a pre-service flush at 2.628 liters per minute (LPM) for two (2) hours using
    deionized water.
    
    Trade names SP-FR8040, SP-BW8040, SP-UL8040, SP-XL8040, SP-ES8040, SP-SW8040 and
    SP-SW8040-HR require a pre-service flush at 12 liters per minute (LPM) for two (2) hours
    using deionized water.
[4] Trade names SP-FR4040-HR, SP-BW4040-HR, SP-UL4040-HR, SP-XL4040-PLUS and SP-SW4040-PLUS
    are certified for use exclusively in public water treatment facilities for a minimum
    daily permeate generation of 2,000 gallons. 
    
    Trade name SP-SW8040 is certified for use exclusively in public water treatment
    facilities for a minimum daily permeate generation of 5,000 gallons. 
    
    Trade name SP-SW8040-HR is certified for use exclusively in public water treatment
    facilities for a minimum daily permeate generation of 6,000 gallons. 
    
    Trade names SP-FR8040, SP-BW8040, SP-UL8040, SP-XL8040 and SP-ES8040 are certified for
    use exclusively in public water treatment facilities for a minimum daily permeate
    generation of 9,000 gallons.



 
ST&H Corporation 
74 Jwadongsunhwan-Ro
Haeundaegu, Busan 612-852 
Republic of Korea 
82 51 744 4680
Visit this company's website


Facility : Gyeongsangnam-Do, Republic of Korea

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Valves[1] [2] [G]
(STC-SR) - Butterfly Valve 2" - 24" CLD 23 MLTPL
(STL-SR) - Butterfly Valve 2" - 24" CLD 23 MLTPL
(STHL) - High Performance Butterfly Valve 2" - 24" CLD 23 MLTPL
(STL-VR) - Butterfly Valve 2" - 24" CLD 23 MLTPL

[1] Available disc types for all models are Stainless Steel, Aluminum Bronze.
[2] STC-SR is Wafer type / Cartridge Seat, STL-SR is Lug type/Cartridge seat. STHL is High
    Performance Lug type. Wafer type and Lug type refer to a flange type. 
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

NOTE: Only products bearing the NSF Mark are Certified.


 
Stabilit America, Inc. DBA Resolite 
285 Industrial Drive
Moscow, TN 38057 
United States 
901-877-3010


Facility : Moscow, TN

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Miscellaneous Process Devices/Components
FRP Opalit Vinyl Ester Panel[G] [1] CLD 23 FRP

[1] Certified for a maximum surface area of 38,819 square feet with a minimum flow of 37,075
    gallons per minute. Certification is based on use upstream of a water treatment facility.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



 
State Industries, Inc. 
500 by Pass Road
Ashland City, TN 37015-1234 
United States 
800-365-0024 
615-792-4371


Facility : Charlotte, NC

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Pressurized Water Storage Tanks[1] [G]
Franklin Electric >= 2 gal. CLD 23 MLTPL

[1] Product also complies with NSF/ANSI 372.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



 
StreamLabs Inc. 
5000 Highlands Parkway SE
Suite 270 
Smyrna, GA 30082 
United States 
770-883-5232


Facility : Smyma, GA

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Switches/Sensors [G]
UFCV-1000[1] 3/4" - 2" CLD 23 MLTPL

[1] Certification includes the following installation kits:
    UFAC-2001 (3/4")
    UFAC-2002 (1")
    UFAC-2003 (1 1/4")
    UFAC-2010 (Universal)
    UFAC-2011 (3/4")
    UFAC-2012 (1")
    UFAC-2013 (1 1/4")
    UFAC-2014 (1 1/2")
    UFAC-2015 (2")
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



 
Sumitomo Electric Industries, Ltd. 
1-1-1, Koyakita
Itami, Hyôgo [Hyogo] 
664-0016 
Japan 
81 72 771 0504


Facility : Guangdong, China

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Ultrafiltration Devices [4] [5] [Pb]
OPMW-11B100-H[3] 26 x 340 cm CLD 23 MLTPL
OPMW-11B50-H[1] 26 x 190 cm CLD 23 MLTPL
OPMW-11B70-H[2] 26 x 250 cm CLD 23 MLTPL

[1] Certified for a munimun daily permeate generation of 50,000L for use in public water
    treatment facilities.
[2] Certified for a munimun daily permeate generation of 70,000L for use in public water
    treatment facilities.
[3] Certified for a munimun daily permeate generation of 100,000L for use in public water
    treatment facilities.
[4] Complies with US EPA Maximum Contaminant Levels (MCLs) for PFAS according to
    NSF/ANSI/CAN 61.
[5] Only products bearing the NSF Mark on the product, product packaging, and/or
    documentation shipped with the product are Certified.
[Pb] Product also evaluated and determined to possess weighted average lead content of
     <=0.25% and complies with lead content requirements for “lead free” plumbing as defined
     by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking
     Water Act.



 
Sun-Star Electric, Inc. 
7722 West 34th Street
Lubbock, TX 79407 
United States 
806-793-2812
Visit this company's website


Facility : Lubbock, TX

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Submersible Motors[1] [2] [G]
Sun Star Type D (Water Filled Motor) 10" - 16" CLD 23 MLTPL
Sun Star Type M (Oil Filled Motor) 10" - 16" CLD 23 MLTPL

[1] Certified for a minimum daily flow of 150,000 L.
[2] Certified for stainless steel motors only.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
      documentation shipped with the product are Certified.


 
Supply Base Ltd. 
4704 Eleniak Road NW
Edmonton, AB T6B 2S1 
Canada 
780-938-9638
Visit this company's website


Facility : # 1 China

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Fittings [G]
FLOSUS PF6 1/2" - 2" C. HOT BRASS
FLOSUS PF6m[1] 1/2" - 2" C. HOT BRASS

[1] RIFENG PF6m uses alloy C69300.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

Valves[G]
FLOSUS Low Lead PEX Ball Valve 1/2" - 1 1/4" C. HOT MLTPL
FLOSUS PEX Ball Valve (PF5-Q) 1/2" - 1 1/4" C. HOT MLTPL

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



 
Suzhou RunMo Water Treatment Technology Co., Ltd. 
West side of Longqiao Road
Wujiang Economic Development Zone 
Suzhou, Jiangsu 215200 
China 
86 512 63016267
Visit this company's website


Facility : Jiangsu, China

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Reverse Osmosis Element[1] [G]
BW-4040FR 4" - 40" CLD 23 MLTPL
BW-8040FR 8" x 40" CLD 23 MLTPL
BW4040-LF 4" - 40" CLD 23 MLTPL
BW4040FR-D 4" - 40" CLD 23 MLTPL
BW8040-365LF 8" x 40" CLD 23 MLTPL
BW8040-400LF 8" x 40" CLD 23 MLTPL
BW8040-440LF 8" - 40" CLD 23 MLTPL
BW8040FR-365D 8" x 40" CLD 23 MLTPL
BW8040FR-400D 8" x 40" CLD 23 MLTPL
MF-EX8-BW-400 8" x 40" CLD 23 MLTPL
NF-4040 4" - 40" CLD 23 MLTPL
NF-8040 8" x 40" CLD 23 MLTPL
NF270-400 8" x 40" CLD 23 MLTPL
NF270-4040 4" - 40" CLD 23 MLTPL
NF270-440 8" x 40" CLD 23 MLTPL
NF90-400 8" x 40" CLD 23 MLTPL
NF90-4040 4" - 40" CLD 23 MLTPL
NF90-440 8" x 40" CLD 23 MLTPL
SC4040-LFD 4" - 40" CLD 23 MLTPL
SC8040-400LFD 8" x 40" CLD 23 MLTPL
SC8040-440LFD 8" x 40" CLD 23 MLTPL
SW4040-LF 4" - 40" CLD 23 MLTPL
SW8040-400LF 8" x 40" CLD 23 MLTPL
SW8040-440LF 8" x 40" CLD 23 MLTPL

[1] Certified for a minimum daily flow of 1900 gallons per day.  Flushed for 5 minutes at a
    rate of 7 gallons per minute with tap water.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



 
Suzhou Snowate Enviro Tech Co., Ltd. 
No. 35, Aigehao Road, Weitang Town
Xiangcheng District, Suzhou 
Jiangsu 215000 
China 
+8615030811699
Visit this company's website


Facility : # 1 China

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Miscellaneous Treatment Devices/Components [G]
SM BW-4040-82FR/34[1] [2] [3] [4] [5] 3.9" x 40" CLD 23 MLTPL
SM BW-4040-82FRLE/34[1] [2] [3] [4] [5] 3.9" x 40" CLD 23 MLTPL
SM BW-4040-82XFR/34[1] [2] [3] [4] [5] 3.9" x 40" CLD 23 MLTPL
SM BW-8040-400FR/34[1] [2] [3] [4] [5] 7.9" x 40" CLD 23 MLTPL
SM BW-8040-400FRLE/34[1] [2] [3] [4] [5] 7.9" x 40" CLD 23 MLTPL
SM BW-8040-400XFR/34[1] [2] [3] [4] [5] 7.9" x 40" CLD 23 MLTPL
SM DTNF(90)[1] [2] [3] [4] [5] 8.5" x 55.12" CLD 23 MLTPL
SM NF150-400/34[1] [2] [3] [4] [5] 7.9" x 40" CLD 23 MLTPL
SM NF150-82[1] [2] [3] [4] [5] 3.9" x 40" CLD 23 MLTPL
SM NF280-400[1] [2] [3] [4] [5] 7.9" x 40" CLD 23 MLTPL
SM NF280-82[1] [2] [3] [4] [5] 3.9" x 40" CLD 23 MLTPL
SM NF500-400[1] [2] [3] [4] [5] 7.9" x 40" CLD 23 MLTPL
SM NF500-82[1] [2] [3] [4] [5] 3.9" x 40" CLD 23 MLTPL
SM NF90-400[1] [2] [3] [4] [5] 7.9" x 40" CLD 23 MLTPL
SM NF90-82[1] [2] [3] [4] [5] 3.9" x 40" CLD 23 MLTPL
SM SF-HC1-400[1] [2] [3] [4] [5] 7.9" x 40" CLD 23 MLTPL
SM SF-HC1-82[1] [2] [3] [4] [5] 3.9" x 40" CLD 23 MLTPL
SM SF-HC2-400[1] [2] [3] [4] [5] 7.9" x 40" CLD 23 MLTPL
SM SF-HC2-82[1] [2] [3] [4] [5] 3.9" x 40" CLD 23 MLTPL
SM SF-HC3-400[1] [2] [3] [4] [5] 7.9" x 40" CLD 23 MLTPL
SM SF-HC3-82[1] [2] [3] [4] [5] 3.9" x 40" CLD 23 MLTPL
SM SF-HC4-400[1] [2] [3] [4] [5] 7.9" x 40" CLD 23 MLTPL
SM SF-HC4-82[1] [2] [3] [4] [5] 3.9" x 40" CLD 23 MLTPL
SM STNF-8035(90)[1] [2] [3] [4] [5] 7.9" x 35" CLD 23 MLTPL
SM STNF-8040(90)[1] [2] [3] [4] [5] 7.9" x 40" CLD 23 MLTPL
SM STNF-8042(90)[1] [2] [3] [4] [5] 7.9" x 42" CLD 23 MLTPL
SM SW-8040-400HRFR/34[1] [2] [3] [4] [5] 7.9" x 40" CLD 23 MLTPL

[1] Naming convention: branding HR: high rejection XHR: ultra-high rejection XLE: extra-low
    energy consumption HRLE: high rejection and low energy consumption FR: fouling
    resistance XFR: ultra-fouling resistance FRLE: fouling resistance and low energy
    consumption
[2] Certified for the following minimum daily (24 hour) permeate generation volumes for use
    in public water treatment facilities: 
    SM SW-2521-12HR: 240 gallons
    SM SW-2521-12HRLE: 290 gallons
    SM DTRO(90), SM DTRO(120): 400 gallons
    SM DTRO(75):420 gallons
    SM DTNF(90): 450 gallons
    SM SW-2540-28HR:580 gallons
    SM SW-4021-33H: 660 gallons
    SM SW-2540-28HRLE: 680 gallons
    SM SW-4021-33HRLE: 790 gallons
    SM SW-4040-82HR: 1,320 gallons
    SM NF90-82: 1,580 gallons
    SM SW-4040-82HRLE: 1,600 gallons
    SM SW-4040-82XLE: 1,660 gallons
    SM SF-HC4-82: 1,720 gallons
    SM NF150-82, SM SF-HC3-82: 1,850 gallons
    SM BW-4040-82FRLE/34, SM SF-HC2-82: 1,900 gallons
    SM BW-4040-82FR/34: 2,000 gallons
    SM BW-4040-82XFR/34: 2,050 gallons
    SM XLP-4040-82: 2,220 gallons
    SM ULP-4040-82, SM BW-4040-82HR, SM BW-4040-82HRLE, SM NF280-82: 2,250 gallons
    SM BW-4040-82XLE: 2,400 gallons
    SM LP-4040-82:2,500 gallons
    SM SF-HC1-82: 2,550 gallons
    SM NF500-82: 2,900 gallons
    SM STRO-8035(120): 5,000 gallons
    SM STRO-8042(120): 5,280 gallons 
[3] Certified for the following minimum daily (24 hour) permeate generation volumes for use
    in public water treatment facilities: 
    SM STRO-8035(90), SM STRO-8040(120): 5,800 gallons
    SM STRO-8042(90), SM STNF-8035(90): 6,070 gallons 
    SM SW-8040-400XHR: 6,100 gallons 
    SM SW-8040-400HR, SM SW-8040-400HRFR/34: 6,500 gallons 
    SM SW-8040-440XHR, SM STRO-8040(90), SM STNF-8042(90): 6,600 gallons 
    SM STNF-8040(90):6,860 gallons 
    SM STRO-8035(75): 7,390 gallons 
    SM SW-8040-400HRLE: 7,400 gallons 
    SM STRO-8042(75): 7,500 gallons 
    SM SW-8040-440HRLE, SM STRO-8040(75):7,900 gallons 
    SM SF-HC4-400: 7,980 gallons 
    SM NF90-400: 8,200 gallons 
    SM SW-8040-400XLE, SM SF-HC3-400: 8,450 gallons 
    SM NF150-400/34: 8,950 gallons 
    SM SF-HC2-400: 9,300 gallons 
    SM SW-8040-440XLE: 9,380 gallons 
    SM BW-8040-400FRLE/34: 10,500 gallons 
    SM NF280-400: 10,550 gallons 
    SM LP-8040-400: 11,000 gallons 
    SM BW-8040-400FR/34: 11,100 gallons 
    SM ULP-8040-400, SM BW-8040-400HR, SM BW-8040-400XFR/34, SM BW-8040-400HRLE: 11,350
    gallons
    SM XLP-8040-400: 11,900 gallons 
    SM BW-8040-400XLE: 12,550 gallons
    SM BW-8040-440HR, SM BW-8040-440HRLE: 12,560 gallons 
    SM ULP-8040-440, SM SF-HC1-400: 12,650 gallons 
    SM NF500-400: 12,680 gallons 
    SM XLP-8040-440: 13,200 gallons
    SM BW-8040-440XLE: 14,000 gallons
[4] A pre-service flush is required at the following flow rates (gallons per minute) for 2
    hours using deionized water: 
    SM BW-4040-82FR/34: 1.39 gpm 
    SM BW-4040-82FRLE/34: 1.32 gpm 
    SM BW-4040-82HR: 1.56 gpm 
    SM BW-4040-82HRLE: 1.56 gpm
     SM BW-4040-82XFR/34: 1.42 gpm 
    SM BW-4040-82XLE: 1.67 gpm
    SM BW-8040-400FR/34: 7.64 gpm
    SM BW-8040-400FRLE/34: 7.29 gpm
    SM BW-8040-400HR: 7.88 gpm 
    SM BW-8040-400HRLE: 7.88 gpm
    SM BW-8040-400XFR/34: 7.89 gpm
    SM BW-8040-400XLE: 8.72 gpm
    SM BW-8040-440HR: 8.72 gpm
    SM BW-8040-440HRLE: 8.72 gpm
    SM BW-8040-440XLE: 9.72 gpm
    SM DTNF(90):1.98 gpm
    SM DTRO(120): 1.76 gpm
    SM DTRO(75): 1.85 gpm
    SM DTRO(90): 1.76 gpm
    SM LP-4040-82: 1.74 gpm
    SM LP-8040-400: 7.71 gpm
    SM NF150-400/34: 6.22 gpm
    SM NF150-82: 1.28 gpm
    SM NF280-400: 7.33 gpm
    SM NF280-82: 1.56 gpm
    SM NF500-400: 8.81 gpm
    SM NF500-82: 2.01 gpm
    SM NF90-400: 5.69 gpm
    SM NF90-82: 1.1 gpm
    SM SF-HC1-400: 8.78 gpm
    SM SF-HC1-82: 1.77 gpm
    SM SF-HC2-400: 6.46 gpm
[5] A pre-service flush is required at the following flow rates (gallons per minute) for 2
    hours using deionized water: 
    SM SF-HC2-82: 1.32 gpm
    SM SF-HC3-400: 5.87 gpm
    SM SF-HC3-82: 1.28 gpm
    SM SF-HC4-400: 5.54 gpm
    SM SF-HC4-82: 1.19 gpm
    SM STNF-8035(90): 4.22 gpm
    SM STNF-8040(90): 4.76 gpm
    SM STNF-8042(90): 4.58 gpm
    SM STRO-8035(120): 3.47 gpm
    SM STRO-8035(75): 5.13 gpm
    SM STRO-8035(90): 4.03 gpm
    SM STRO-8040(120): gpm
    SM STRO-8040(75): 5.49 gpm
    SM STRO-8040(90): 4.58 gpm
    SM STRO-8042(120): 3.67 gpm
    SM STRO-8042(75): 5.21 gpm
    SM STRO-8042(90): 4.22 gpm
    SM SW-2521-12HR: 0.17 gpm
    SM SW-2521-12HRLE: 0.2 gpm
    SM SW-2540-28HR: 0.4 gpm
    SM SW-2540-28HRLE: 0.47 gpm
    SM SW-4021-33HR: 0.46 gpm
    SM SW-4021-33HRLE: 0.55 gpm
    SM SW-4040-82HR: 0.92 gpm
    SM SW-4040-82HRLE: 1.11 gpm
    SM SW-4040-82XLE: 1.15 gpm
    SM SW-8040-400HR: 4.51 gpm
    SM SW-8040-400HRFR/34: 4.51 gpm
    SM SW-8040-400HRLE: 5.14 gpm
    SM SW-8040-400XHR: 4.24 gpm
    SM SW-8040-400XLE: 5.87 gpm
    SM SW-8040-440HRLE: 5.49 gpm
    SM SW-8040-440XHR: 4.58 gpm
    SM SW-8040-440XLE: 6.51 gpm
    SM ULP-4040-82: 1.56 gpm
    SM ULP-8040-400: 7.88 gpm
    SM ULP-8040-440: 8.78 gpm
    SM XLP-4040-82: 1.54 gpm
    SM XLP-8040-400: 8.26 gpm
    SM XLP-8040-440: 9.17 gpm
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



 
Suzhou Viza Valve Co., Ltd. 
No. 18, Jinlu Road, Jinxi Town
Kunshan Jiangsu 215324 
China 
86 226 653 1685


Facility : Tainjin, China

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Valves[G]
Butterfly Valve with CF8M Disc / N200S-L 1 1/2" - 12" CLD 23 MLTPL
Butterfly Valve with CF8M Disc / N200S-W 1 1/2" - 12" CLD 23 MLTPL
Butterfly Valve with CF8M Disc/N100S-L 1 1/2" - 12" CLD 23 MLTPL
Butterfly Valve with CF8M Disc/N100S-W 1 1/2" - 12" CLD 23 MLTPL
Butterfly Valve with CF8M Disc/N300S-L 1 1/2" - 12" CLD 23 MLTPL
Butterfly Valve with CF8M Disc/N300S-W 1 1/2" - 12" CLD 23 MLTPL
Butterfly Valve with Nylon Coated Disc / N200N-L 1 1/2" - 12" CLD 23 MLTPL
Butterfly Valve with Nylon Coated Disc / N200N-W 1 1/2" - 12" CLD 23 MLTPL
Butterfly Valve with Nylon Coated Disc /N100N-L 1 1/2" - 12" CLD 23 MLTPL
Butterfly Valve with Nylon Coated Disc /N100N-W 1 1/2" - 12" CLD 23 MLTPL
Butterfly Valve with Nylon Coated Disc /N300N-L 1 1/2" - 12" CLD 23 MLTPL
Butterfly Valve with Nylon Coated Disc /N300N-W 1 1/2" - 12" CLD 23 MLTPL
Wafer Check Valve / N800S 2" - 12" CLD 23 MLTPL

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



 
SW Valve Co., Ltd. 
1530-1 Seobu-ro
Jucheon-myon, Gimhae-si 
Gyeongsangnam-Do 50877 
Republic of Korea 
82 55 314 5046


Facility : Gyeongsangnam-Do, Republic of Korea

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Valves[1] [2] [3] [G]
HIGH PERFORMANCE BUTTERFLY VALVE-HTF 3" - 24" CLD 23 MLTPL
HIGH PERFORMANCE BUTTERFLY VALVE-HTL 3" - 24" CLD 23 MLTPL
HIGH PERFORMANCE BUTTERFLY VALVE-HTW 3" - 24" CLD 23 MLTPL

[1] For metal alloy components indicated on the wetted parts list as supplied by Any
    Supplier only, alternate suppliers are acceptable if a metallurgical analysis specific
    for the alloy is available for review from each source. The auditor is required to
    verify that copies of metal certification statements are kept on file and the standard
    alloy designation from each supplier matches that noted on the wetted parts list.
[2] Complies with US EPA Maximum Contaminant Levels (MCLs) for PFAS according to
    NSF/ANSI/CAN 61.
[3] Certified for stainless steel and PTFE materials only.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



SWM International 
17 rue Edmond Reuter
Contern, L-5326 
Luxembourg 
Visit this company's website


Facility : Quimperlé, France

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Filtration Devices/Components
MemBase[1] [2] CLD 23 OTHER

[1] Certified for a minimum daily flow of 24,600 liters per day.
[2] Certified for a maximum surface area of 440 sq. ft.



 
Syntech Fibres (PVT) Ltd. 
5-3-1, Sector 15
Korangi Industrial Area 
Karachi-74900 
Pakistan 
92 21 506 6636


Facility : Karachi, Pakistan

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Microfiltration Devices[1]
Aqua Clear® Filter Cartridges[2] [3] C. HOT MLTPL
Code A (1)(2)(3)(4)(5)(6)-(7)(8)[2] [3] C. HOT MLTPL
Code S (1)(2)(3)(4)(5)(6)-(7)(8)[2] [3] C. HOT MLTPL
Sedifilt® Filter Cartridges[2] [3] C. HOT MLTPL
Super Fine Filter Cartridges PPF-(1)-(2)-(3)-(4)[4] [3] C. HOT MLTPL

[1] NSF has not conducted production control audits at this facility.  Product Listing is
    based on type testing [ISO/IEC Guide 2: 1996(E/F/R) 14.5].
[2] (1) Media
        None - Extractables free polypropylene
        RO   - Reverse osmosis
    (2) Length
        10 - 10"
        20 - 20"
        30 - 30"
        40 - 40"
        50 - 50"
    (3) Variation in length
        A    - Specified length
        None - Nominal length
        Custom lengths are available from 10" to 72"
    (4) Micron rating (nominal)
        1 micron
        5 microns
        10 microns
        20 microns
        40 microns
        80 microns
        Custom micron rating available from 1 micron to 100 microns.
    (5) Outer diameter (mm)
        A - 63.5
        D - 100
        E - 60
        J - 114.5
        Custom outer diameters available from 55 mm to 155 mm.
    (6) End adapters
        E222   - Double 222 o-rings end cap
        E222/C - Two end caps, one with double 222 o-rings, other end flat closed
        EA     - Spring end
        EF     - Fin end
        EC     - Closed end cap
        ER     - Reusable stainless steel spring
        ES     - Stepped end
        X      - Extended core
        XT     - Tapered extended core (all core media)
        None   - No end adapters (double open end - DOE)
    (7) Core material
        S    - Stainless steel 304/316L
        None - 100% polypropylene
    (8) Inner diameter (mm)
        27mm
        35mm
        Customer inner diameters are available in metal cores.
[3] Only cartridges 10" and longer have been reviewed and evaluated for Standard 61.  This
    product has not been reviewed or evaluated for point-of-use or point-of-entry
    applications.
[4] Super Fine Filter Cartridges PPF-(1)-(2)-(3)-(4) is denoted as follows:
    (1) Length in mm (254 – 1778)
    (2) Outer diameter in mm (50 – 150)
    (3) Weight in grams
    (4) Profile:
        P - Plain
        L - Lined
        G - Grooved
        D - Dotted
    Micron rating - available from 1 µm to 100 µm
    Inner Diameter (mm) – 28 mm – 29 mm



 
Taco, Inc. 
1160 Cranston Street
Cranston, RI 02920 
United States 
401-942-8000


Facility : Fall River, MA

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Thermal Expansion Tanks[1] [2] [G]
CAF?-&@P 90 L - 2500 L CLD 23 MLTPL

[1] Certified for use on cold water side of the hot water tank only.
[2] Tank size in liters is represented by #, $, or ?
    # tank size may be 30, 42, 84, 130, 170, 215, 254, 300, 350, 425, or 500 Liters
    $ tank size may be 90, 140, 215, 300, 450, 500, 600, 700, 800, 900, 1000, 1100, 1200,
    1300, 1400, 1500, 1600, 1800, 2000, 2500, 3000, 4000, 5000, 7500, or 10000 Liters
    ? tank size may be 90, 140, 215, 300, 450, 500, 600, 700, 800, 900, 1000, 1100, 1200,
    1300, 1400, 1500, 1600, 1800, 2000, or 2500 Liters
    Pressure rating is represented by % or &
    % pressure rating may be 150 or 175
    & pressure rating may be 125 150, 175, 250, or 300
    @ is optional and may be the letter "A", "B", or "AB" indicating additional tank options
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



Facility : Cranston, RI

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Pumps
006B-RECIRC-DT-IFC[G] [13] 1/2-1 1/2 in D. HOT MLTPL
1911ecm-SF VR50105-CD1-FSWXYZ[9] [G] 1 1/2" x 1 1/2" C. HOT MLTPL
1915e-SF VR65120-CB1-FSWXYZ[9] [G] 1 1/2" x 1 1/2" C. HOT MLTPL
1915ecm-SF VR65120-CB2-FSWXYZ[9] [G] 1 1/2" x 1 1/2" C. HOT MLTPL
LoadMatch® L(A)-(B)(C)(D)(E)-(F)(G)(H)(I)[G] [10] 1/2" - 1 1/2" D. HOT MLTPL

[4] The SPe-1 SmartPlus-e® consists of a 3/4" pump.
[5] The (X) in the trade name can be any of the following letter combinations: CI, FI, KV,
    SCI, SFI, SKV, SKS. The (Y) in the trade name can be a C,D, or could be blank.
[6] Impeller size: 6" - 13"
[7] (X) The first identification group is the pump series identifier: 3, 5, 6, 7, or 15
    (1) Control modifier
        IQ  – Circulator with Smart Pulse Control
        MS  – Multi speed circulator
        VR  – Variable speed circulator, outdoor reset (VSD-R)
        VS  – Variable speed circulator, set point (VSD-S)
        VV  – Variable speed circulator, 0-10 volt (VSD-V)
        VT  – Variable speed circulator, solar (VSD-T)
        VDT – Variable speed circulator, Delta-T (VSD-S)
        Z   – Zoning circulator (115V/120V, 60 Hz versions only)
        No letter - No controller
    (2) Material Modifier
        B – Bronze casing
        S – Stainless steel casing
        Cast iron casings with no material modifier are excluded from this  
        Certification.
    (3) Casing modifier
        No letter – Sweat pump housing connection
        C – Casing threads for body mounting
        F – Flange pump housing connections
        T – Internal NPT pipe thread pump housing connections
    (4) Revision version. Any value is acceptable.
    (5) Motor modifier (last digit in 2nd identification group)
        No letter – 115V, 60 Hz motor
        A – 220V, 50 Hz motor
        R – 100/110V, 50 Hz motor
        U – 265V, 60 Hz motor
        V – 220V, 60 Hz motor
        Y – 208/230V, 60 Hz motor 
    (6) Optional 3rd identification group
        Blank
        IFC - Integral flow check
        PNP - Plumb 'n Plug
        Any optional identifier not affecting the wetted parts
[8] All pump models may be supplied with or without flanges.
[9] WXYZ in the trade name refers to the following:
    W: Position Modifier (Motor rotation position)
    X: Color Modifier (A: Standard Color)
    Y and Z: Special Labeling Modifier (Software code, OEM Packaging)
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.
[10] (A) Model
         0205, 0609, 0410, 0710
     (B) Motor rating
         Y6 – 110/120v, 60Hz
         B6 – 220/240v, 60Hz
         R6 – 265/277v, 60Hz
         Y5 – 110/120v, 50Hz
         B5 – 220/240v, 50Hz
         R5 – 265/277v, 50Hz
     (C) Casing material
         B – Bronze
         S – Stainless steel
     (D) Feature
         S – Standard
         D – Variable speed 0 - 10V
         E – Variable speed set point
         M – 3 Speed (multi)
         Z – Zoning circ.
         I – IFC
         R – Relay
         F – Variable speed set point + IFC
         N – 3 Speed (multi) + IFC
         X – Zoning circ. + IFC
         V – Variable speed 0 - 10V + IFC
     (E) UL Version. Any value is acceptable
     (F) Connection
         F – Flange, pipe mounting
         S – Sweat, pipe mounting
         C – Sweat, casing mounting
         U – Union, pipe mounting
         N – NPT, pipe mounting
         E – End Suction, pipe mounting
     (G) Fitting
         7 – 3/4"
         5 – 1/2"
         H – horizontal
         V – vertical
     (H) Pump and bracket position
         A, B, C, D, E, F, G, H, J, K, L, M, N, P, Q, R, S, T, U, V, W
     (I) Feature
         N – None
         V – Viton seals
         L – Line cord (non-UL)
     Other identifiers denoting non-standard changes
[11] XX and XXXX in the trade name refer to any alpha numberic characters. They do not
     reflect wetted parts.
[13] 003B-RECIRC-DT, 006B-RECIRC-DT, and 006B-RECIRC-DT-IFC are kits comprised of Certified
     pumps 00(X)-(1)(2)(3)(4)(5)-(6) and a digital timer.
     1st 3 digits = circulator model
     B = Bronze casing material
     Recirc = application
     DT = Plugin Digital Timer

Valves [G] [11]
LB-075-H-1LF[G] 3/4" D. HOT MLTPL
LB-075-H-2LF 3/4" D. HOT MLTPL
LBW-075-H-1LF[G] 3/4" D. HOT MLTPL
LBW-075-H-2LF 3/4" D. HOT MLTPL
LBW-075-RA-1LF[G] 3/4" D. HOT MLTPL

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.
[11] XX and XXXX in the trade name refer to any alpha numberic characters. They do not
     reflect wetted parts.
[12] V - Valve body
     x - Size
         050 - 1/2"
         075 - 3/4"
     C - Sweat connection
     2 - Two way valve type
     D - NSF 61 Sec. 8 and Annex G
     2 - Revision Level
     y - Non-wetted components
         Blank - No actuator
         8 digit alpha-numeric code - Actuator naming system
     z - Bulk pack
         Blank - Standard (1 unit)
         BP    - Bulk pack



Facility : Komenda, Slovenia

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Pumps[1] [G]
VR15H-SF 1 1/2" C. HOT MLTPL
VR15L-SF 1 1/2" C. HOT MLTPL
VR15M-SF 1 1/2" C. HOT MLTPL
VR20H-SF 2" C. HOT MLTPL
VR20L-SF 2" C. HOT MLTPL
VR20M-SF 2" C. HOT MLTPL
VR25H-SF 2 1/2" C. HOT MLTPL
VR25H-SF1 2 1/2" C. HOT MLTPL
VR25L-SF 2 1/2" C. HOT MLTPL
VR25M-SF 2 1/2" C. HOT MLTPL
VR30H-SF 3" C. HOT MLTPL
VR30H-SF1 3" C. HOT MLTPL
VR30L-SF 3" C. HOT MLTPL
VR30M-SF 3" C. HOT MLTPL
VR30M-SF1 3" C. HOT MLTPL

[1] Naming convention for all models except VR15L-DS1-XHH00:
    VR(A)(B)(C)-(D)(E)(F):
    A and B:  Performance range (15, 20, 25, or 30)
    C: Low, medium, or high head applications (L, M, or H)
    D: Casing material (S = stainless steel)
    E: Connection type (F = flanged)
    F: Model Revision (1 - 9) (may or may not appear)
    
    Naming convention for VR15L-DS1-XHH00:
    (1)(2)(3)(4)(5) - (6)(7)(8) - (9)(10)(11)(12)(13)
    1. Pump Series (V = Viridian)
    2. Motor Controller Modifier (R = self-regulating)
    3 and 4. Flange Size (15, 20, 25, or 30)
    5. Performance Range (L, M, or H)
    6. Motor Voltage Modifier (D or G)
    7. User interface Modifier (C, S, or U)
    8. Agency revision (1-9)
    9. Casing material (C = cast iron, S = stainless steel, X = no casing)
    10. Casing Modifier: (F = flanged, E = end suction, H = header pump)
    11. Packaging modifier (W, H, or P)
    12-13: Specials identifier
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



 
Taizhou Tonhe Flow Control Co., Ltd. 
No. 3 Bldg, Xinshun SME Pioneer Park
Jiangkou Street, Huangyan 
Taizhou City, Zhejiang 318020 
China 
86 576 8110 0233
Visit this company's website


Facility : Zhejiang, China

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Valves[G]
Tonhe timer control valve S10-S2-C-F99 3/8" CLD 23 MLTPL
Tonhe timer control valve S10-S2-C-FM24 3/8" CLD 23 MLTPL
Tonhe timer control valve S10-S2-C-FM99 3/8" CLD 23 MLTPL
Tonhe timer control valve S8-S2-C-F99 1/4" CLD 23 MLTPL
Tonhe timer control valve S8-S2-C-FM24 1/4" CLD 23 MLTPL
Tonhe timer control valve S8-S2-C-FM99 1/4" CLD 23 MLTPL

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



 
Tasnee Water Solutions Company LLC 
Dohat Al Adab Street
Muscat 130 
Oman 
968 2450 3979
Visit this company's website


Facility : # 1 China

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Reverse Osmosis Element[1] [2]
TSF05 SW-8040 8" x 40" CLD 23 MLTPL
TSF07 SW-8040 PRO 8" x 40" CLD 23 MLTPL

[1] TSF07 SW-8040 PRO and TSF05 SW-8040 require a pre-service flush at 12 liters per minute
    (LPM) for two (2) hours using deionized water.
[2] Trade name TSF07 SW-8040 PRO is certified for use exclusively in public water treatment
    facilities for a minimum daily permeate generation of 5,000 gallons. Trade name TSF05
    SW-8040 is certified for use exclusively in public water treatment facilities for a
    minimum daily permeate generation of 6,000 gallons.



 
Tata Steel Limited 
43, Jawaharlal Nehru Road
6th Floor Tata Center 
Kolkata, West Bengal 700071 
Kolkata, WB 700071 
India 
91 7596086366


Facility : Kolkata, West Bengal, India

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Pressurized Water Storage Tanks
Tata Steel FRP Vessel 10 L - 3790 L CLD 23 MLTPL



 
Tega Engineering Industry & Trade Inc. 
1. Organize Sanayi Bolgesi
Ural Cad. No: 9 Sincan 
06930 Ankara 
Turkey 
90 312 267 1876
Visit this company's website


Facility : Ankara, Turkey

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Service Saddles[1] [2]
EF Branch Saddle 1 1/4"x1/2"-63"x20" CLD 23 PE
EF Branch Saddle (NPT) 2" x 3/4" - 28" x 2" CLD 23 MLTPL

[1] Certification requested for equivalent metric sizes.
[2] EF Branch Saddle includes:
    Electrofusion Small Branch Saddles - 1 1/4" (Base) x 1/2" (Outlet) - 18" (Base) x
    2"(Outlet).
    Electrofusion Large Branch Saddles - 3" (Base) x 3" (Outlet) - 63" (Base) x 20"
    (Outlet).
    EF Branch Saddle (NPT) includes:
    Branch Saddle NPT Eco Brass Female 2" (Base) x 3/4" (Outlet) - 28" (Base) x 2" (Outlet)

Tapping Sleeves[1]
EF Tapping Tee 1 1/4"-10" x 1/2"-2" CLD 23 MLTPL
EF Valve Tapping Tee (VS) 2" - 10" x 1/2" - 2" CLD 23 MLTPL

[1] Certification requested for equivalent metric sizes.

NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
      documentation shipped with the product are Certified.


 
Tekleen Automatic Filters Inc. 
2672 South La Cienega Boulevard
Los Angeles, CA 90034 
United States 
800-336-1942 
310-839-2828
Visit this company's website


Facility : Sante Fe Springs , CA

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Microfiltration Devices[1] [G]
ABWX-Y 1" - 36" CLD 23 MLTPL
LPFX-Y 1" - 36" CLD 23 MLTPL
MTFX-Y 1" - 24" CLD 23 MLTPL

[1] X - Inlet/outlet size (1" - 36"
    Y - May include any of the following suffixes:
        E  - Economy (small size filtering screen)
        L  - Long
        P  - Inlet/outlet are parallel with one another
        S  - Short
        SL - Super long
        T  - Twin (two filtering screens)
        TR - Triple (three filtering screens)
        XL - Extra long
    Minimum daily flow is 14,000 gallons.
    Certification does not include field installed fittings.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

NOTE: Only products bearing the NSF mark on the products, product packaging, and/or
      documentation shipped with the product are Certified.


 
Telemacanique Sensors MTY 
Av Industria Automotriz # 90, Parque
Industrial Stiva Aeropuerto Apodaca 
Apodaca, Nuevo Léon 66626 
Mexico 
52 812 355 1574


Facility : Apodaca, Nuevo Léon, Mexico

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Switches/Sensors
9013F(A)(B)(CC)(DDD)(E)[G] [1] CLD 23 MLTPL

[1] The following configurations are Certified:					
    (A) - Mechanism type						
          R - Reverse action						
          S - Standard adjustable differential
          T - Non-adjustable differential						
          Y - Higher HP with adjustable differential		
    (B) - Enclosure type						
          G - NEMA1 General Purpose Electrical Enclosure		
          W - NEMA3R Outdoor Electrical Enclosure
    (CC) - Fluid connection type						
           1 - 1/8" NPSF internal threads					
           2, 12, 22, 32, 42, 52, 62, 72, 82, 92 - 1/4" NPSF internal 					
           4 - Narrow Differential						
           8, 18, 28, 38, 48, 58, 68, 78, 88, 98 - 1/4" Flare
           9, 19, 29, 39, 49, 59, 89, 99 - 1/4" NPT internal 						
           10 - 1/4" Bayonet, barbed						
    (DDD) - Pressure Regulation						
            J15 - J99						
    (E) - Form (Optional)						
          BP   - Box pack for consumer products
          CP   - Clam pack for consumer products
          C16  - Standard pack of 16 devices per box. Applies for product with Forms 
                 T.
          C20  - Standard pack of 20 devices per box. Applies for product with Forms 
                 M1, M3, M4, M5, and product without Forms M1, M3, M4, M5, T.					
          C40  - Standard pack of 40 devices per box. Applies for product with Forms 
                 M1, M3, M4, M5.
          C50  - Standard pack of 50 devices per box. Applies for product without 
                 Forms M1, M3, M4, M5, T.		
          C400 - Standard pack of 400 devices per box. Applies for product without 
                 Forms M1, M3, M4, M5, T.		
          H    - One normally open - one normally closed contact. Applies to FRG-2 
                 Pole.	
          M1   - Maintained manual cut-out lever (Auto-off). Applies to FSG, FYG.			
          M3   - Momentarily manual cut-in lever (Auto-start). Applies to FSG2-59 
                 only.		
          M4   - Low pressure cut-off (auto-start-off). Operates at approximately 10 
                 psig below cut-in and will turn off the pump. Applies to FSG and 
                 FYG.
          M5   - Maintained manual cut-in lever (auto-on). Applies to FRG2-59 only			
          P    - Pulsation plug - Type 2 & 9 only. Applies to FRG, FSG, FYG					      
          Q8   - Plastic flange (max temp 120°F, max pressure 80 psi). Applies to 
                 FSG, FYG, FRG. Available only in types FGS2, FYG2, FRG2, FSG*2, 
                 FYG*2, FRG*2. 
                 Applies to 1/4" NPSF internal only.
          T    - 1/2" conduit bushing - 1/2" long thread - on left. Applies to all 
                 Type F.						
          U    - Slip-on connectors (load side terminals only). Applies to FSG FYG.			
          U2   - Slip-on connectors (line and load terminals). Applies to FSG and 
                 FYG.		
          Z22  - Black cover. Applies to FSG, FYG.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

NOTE: NSF has not conducted production control audits at this facility. Product Listing is
      based on type testing [ISO/TEC Guide 2: 1996(E/F/R) 14.5]


 
The Boys, LLC dba SupplyHouse.com 
130 Spagnoli Road
Melville, NY 11747 
United States 
631-393-2855


Facility : # 1 China

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Valves [G]
Bluefin Low Lead Full Port Brass Ball Valve, Solder 1/2" - 2" C. HOT MLTPL
Bluefin Low Lead Standard Port Brass Ball Valve, Solder 1/2" - 2" C. HOT MLTPL
Bluefin Low Lead Full Port Brass Ball Valve with Drain, Solder 1/2" - 1" C. HOT MLTPL
Bluefin Low Lead Full Port Brass Ball Valve, FIP Threaded 1/2" - 2" C. HOT MLTPL
Bluefin Low Lead PEX Ball Valve 1/2" - 1 1/4" C. HOT MLTPL
Bluefin Low Lead Standard Port Brass Ball Valve, FIP Threaded 1/2" - 2" C. HOT MLTPL

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



 
The Home Depot, Inc. 
2455 Paces Ferry Road
Atlanta, GA 30339 
United States 
770-433-8211
Visit this company's website


Facility : Chesnee, SC

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Miscellaneous Process Devices/Components [G]
800459-HPL-1846–TF125PE Bulkhead Union[1] 1 1/4" CLD 23 MLTPL
800469-HPL-1871–TF12PE Bulkhead Union[2] 1/2" CLD 23 MLTPL
800479-HPL-1872–TF34PE Bulkhead Union[2] 3/4" CLD 23 MLTPL

[1] Certified for a minimum tank size of 50 gallons.
[2] Certified for a minimum tank size of 5 gallons.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



 
The Mosack Group, Inc. 
701 Matthews-Mint Hill Road
Matthews, NC 28105 
United States 
704-847-9191


Facility : Foshan, China

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Fittings[G]
TMG/C-PEX PF6 EPXC11 1/2" - 2" C. HOT BRASS
TMG/C-PEX PF6 EPXC1234 1/2" - 2" C. HOT BRASS
TMG/C-PEX PF6 EPXC341 1/2" - 2" C. HOT BRASS
TMG/C-PEX PF6 EPXC3434 1/2" - 2" C. HOT BRASS
TMG/C-PEX PF6 EPXDEE12 1/2" - 2" C. HOT BRASS
TMG/C-PEX PF6 EPXDEE34 1/2" - 2" C. HOT BRASS
TMG/C-PEX PF6 EPXDEE3412 1/2" - 2" C. HOT BRASS
TMG/C-PEX PF6 EPXDET12 1/2" - 2" C. HOT BRASS
TMG/C-PEX PF6 EPXDET34 1/2" - 2" C. HOT BRASS
TMG/C-PEX PF6 EPXE11 1/2" - 2" C. HOT BRASS
TMG/C-PEX PF6 EPXE1210PK 1/2" - 2" C. HOT BRASS
TMG/C-PEX PF6 EPXE1212 1/2" - 2" C. HOT BRASS
TMG/C-PEX PF6 EPXE1234 1/2" - 2" C. HOT BRASS
TMG/C-PEX PF6 EPXE3434 1/2" - 2" C. HOT BRASS
TMG/C-PEX PF6 EPXFA1 1/2" - 2" C. HOT BRASS
TMG/C-PEX PF6 EPXFA1212 1/2" - 2" C. HOT BRASS
TMG/C-PEX PF6 EPXFA1234 1/2" - 2" C. HOT BRASS
TMG/C-PEX PF6 EPXFA341 1/2" - 2" C. HOT BRASS
TMG/C-PEX PF6 EPXFA3412 1/2" - 2" C. HOT BRASS
TMG/C-PEX PF6 EPXFA34125PK 1/2" - 2" C. HOT BRASS
TMG/C-PEX PF6 EPXFA3434 1/2" - 2" C. HOT BRASS
TMG/C-PEX PF6 EPXFS1212 1/2" - 2" C. HOT BRASS
TMG/C-PEX PF6 EPXFS1234 1/2" - 2" C. HOT BRASS
TMG/C-PEX PF6 EPXFS341 1/2" - 2" C. HOT BRASS
TMG/C-PEX PF6 EPXFS3434 1/2" - 2" C. HOT BRASS
TMG/C-PEX PF6 EPXFSA11 1/2" - 2" C. HOT BRASS
TMG/C-PEX PF6 EPXMA11 1/2" - 2" C. HOT BRASS
TMG/C-PEX PF6 EPXMA1212 1/2" - 2" C. HOT BRASS
TMG/C-PEX PF6 EPXMA1234 1/2" - 2" C. HOT BRASS
TMG/C-PEX PF6 EPXMA134 1/2" - 2" C. HOT BRASS
TMG/C-PEX PF6 EPXMA341 1/2" - 2" C. HOT BRASS
TMG/C-PEX PF6 EPXMA3410PK 1/2" - 2" C. HOT BRASS
TMG/C-PEX PF6 EPXMA3412 1/2" - 2" C. HOT BRASS
TMG/C-PEX PF6 EPXMA3434 1/2" - 2" C. HOT BRASS
TMG/C-PEX PF6 EPXME1212 1/2" - 2" C. HOT BRASS
TMG/C-PEX PF6 EPXMS1212 1/2" - 2" C. HOT BRASS
TMG/C-PEX PF6 EPXMS1234 1/2" - 2" C. HOT BRASS
TMG/C-PEX PF6 EPXMS341 1/2" - 2" C. HOT BRASS
TMG/C-PEX PF6 EPXMS3434 1/2" - 2" C. HOT BRASS
TMG/C-PEX PF6 EPXMSA11 1/2" - 2" C. HOT BRASS
TMG/C-PEX PF6 EPXMSA115PK 1/2" - 2" C. HOT BRASS
TMG/C-PEX PF6 EPXPR1212 1/2" - 2" C. HOT BRASS
TMG/C-PEX PF6 EPXPR3434 1/2" - 2" C. HOT BRASS
TMG/C-PEX PF6 EPXT11 1/2" - 2" C. HOT BRASS
TMG/C-PEX PF6 EPXT1112 1/2" - 2" C. HOT BRASS
TMG/C-PEX PF6 EPXT1134 1/2" - 2" C. HOT BRASS
TMG/C-PEX PF6 EPXT12 1/2" - 2" C. HOT BRASS
TMG/C-PEX PF6 EPXT1210PK 1/2" - 2" C. HOT BRASS
TMG/C-PEX PF6 EPXT121234 1/2" - 2" C. HOT BRASS
TMG/C-PEX PF6 EPXT34 1/2" - 2" C. HOT BRASS
TMG/C-PEX PF6 EPXT341212 1/2" - 2" C. HOT BRASS
TMG/C-PEX PF6 EPXT341234 1/2" - 2" C. HOT BRASS
TMG/C-PEX PF6 EPXT343412 1/2" - 2" C. HOT BRASS
TMG/C-PEX PF6 EPXT3434125PK 1/2" - 2" C. HOT BRASS

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

Valves[G]
TMG/C-PEX PEX Ball Valve (PF5-Q) APXV11 1/2" - 1 1/4" C. HOT MLTPL
TMG/C-PEX PEX Ball Valve (PF5-Q) APXV1212 1/2" - 1 1/4" C. HOT MLTPL
TMG/C-PEX PEX Ball Valve (PF5-Q) APXV3434 1/2" - 1 1/4" C. HOT MLTPL

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



 
The Mosack Group, Inc. 
11210 Allen Station Drive
Mint Hill, NC 28227 
United States 
704-841-6167
Visit this company's website


Facility : # 1 China

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Valves[G]
APXV11 1" PEX Brass Lead Free Ball Valve 1/4" - 4" CLD 23 MLTPL
APXV12T 1/2" PEX x 1/2" PEX with Brass Ball Valve w/ Butterfly Handle 1/4" - 4" CLD 23 MLTPL
APXV3434 3/4" PEX x 3/4" PEX LF Brass BV 1/4" - 4" CLD 23 MLTPL
APXV34T 1/2" PEX x 1/2" PEX with Brass Ball Valve w/ Butterfly Handle 1/4" - 4" CLD 23 MLTPL
APXVT121238 1/2" x 1/2" PEX x 3/8" OD Comp Lead Free Mini Tee Valve 1/4" - 4" CLD 23 MLTPL
EPXFF1212SDV 1/2 F1960 x 1/2 NPSM Straight Mini Ball Valve 1/4" - 4" CLD 23 MLTPL
EPXFF1212SDV 1/2" x 1/2" Brass PEX-A Barb x FPT 2.4 in. Swivel Ball Valve 1/4" - 4" CLD 23 MLTPL
EPXSCV1234 1/2" F1960 X 3/4" GHT w/ nail flange, 1/4" TURN SILLCOCK 1/4" - 4" CLD 23 MLTPL
EPXV1 VALVE 1 F1960 BALL NO LEAD 1/4" - 4" CLD 23 MLTPL
EPXV12 VALVE 1 F1960 BALL NO LEAD 1/4" - 4" CLD 23 MLTPL
EPXV12T 1/2" PEX Brass Lead Free Ball Valve w/ Butterfly Handle 1/4" - 4" CLD 23 MLTPL
EPXV34 VALVE 3/4 F1960 BALL NO LEAD 1/4" - 4" CLD 23 MLTPL
EPXV34T 3/4" PEX Brass Lead Free Ball Valve w/ Butterfly Handle 1/4" - 4" CLD 23 MLTPL
EPXVA1214C 1/2 F1960 x 1/4 COMP ANGLE 1/4" - 4" CLD 23 MLTPL
EPXVA1238C 1/2 PEX F1960 X 3/8 COMPRESSION NL 1/4-TURN ANGLE STOP 1/4" - 4" CLD 23 MLTPL
EPXVS1214C 1/2 F1960 x 1/4 COMP STRAIGHT 1/4" - 4" CLD 23 MLTPL
EPXVS1238C 1/2 PEX F1960 X 3/8 COMPRESSION NL 1/4-TURN STRAIGHT STOP 1/4" - 4" CLD 23 MLTPL
WEPXV12 1/2" PEX Expansion Brass Lead Free Ball Valve 1/4" - 4" CLD 23 MLTPL
WEPXV34 3/4" PEX Expansion Brass Lead Free Ball Valve 1/4" - 4" CLD 23 MLTPL
WPXPR12-12PK 1/2" Press x 1/2" F1807 Adapter 1/4" - 4" CLD 23 MLTPL
WPXPR34-12PK 3/4"Press x 3/4" F1807 Adapter 1/4" - 4" CLD 23 MLTPL
ZAPXFF1212S 1/2" PEX x 1/2" FEMALE SWIV ADAPTER 1/4" - 4" CLD 23 MLTPL
ZAPXFF1212SDV 1/2 IN. PEX x 1/2 MPSCH SWIVEL 1/4" - 4" CLD 23 MLTPL
ZAPXV11 1" PEX Brass Lead Free Ball Valve 1/4" - 4" CLD 23 MLTPL
ZAPXV1212 1/2" PEX x 1/2" PEX LF Brass BV 1/4" - 4" CLD 23 MLTPL
ZAPXV3434 3/4" PEX x 3/4" PEX LF Brass BV 1/4" - 4" CLD 23 MLTPL

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



Facility : # 2 Thailand

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Valves[G]
APXV11 1" PEX Brass Lead Free Ball Valve 1/4" - 4" CLD 23 MLTPL
APXV12T 1/2" PEX x 1/2" PEX with Brass Ball Valve w/ Butterfly Handle 1/4" - 4" CLD 23 MLTPL
APXV3434 3/4" PEX x 3/4" PEX LF Brass BV 1/4" - 4" CLD 23 MLTPL
APXV34T 1/2" PEX x 1/2" PEX with Brass Ball Valve w/ Butterfly Handle 1/4" - 4" CLD 23 MLTPL
APXVT121238 1/2" x 1/2" PEX x 3/8" OD Comp Lead Free Mini Tee Valve 1/4" - 4" CLD 23 MLTPL
EPXFF1212SDV 1/2 F1960 x 1/2 NPSM Straight Mini Ball Valve 1/4" - 4" CLD 23 MLTPL
EPXFF1212SDV 1/2" x 1/2" Brass PEX-A Barb x FPT 2.4 in. Swivel Ball Valve 1/4" - 4" CLD 23 MLTPL
EPXSCV1234 1/2" F1960 X 3/4" GHT w/ nail flange, 1/4" TURN SILLCOCK 1/4" - 4" CLD 23 MLTPL
EPXV1 VALVE 1 F1960 BALL NO LEAD 1/4" - 4" CLD 23 MLTPL
EPXV12 VALVE 1 F1960 BALL NO LEAD 1/4" - 4" CLD 23 MLTPL
EPXV12T 1/2" PEX Brass Lead Free Ball Valve w/ Butterfly Handle 1/4" - 4" CLD 23 MLTPL
EPXV34 VALVE 3/4 F1960 BALL NO LEAD 1/4" - 4" CLD 23 MLTPL
EPXV34T 3/4" PEX Brass Lead Free Ball Valve w/ Butterfly Handle 1/4" - 4" CLD 23 MLTPL
EPXVA1214C 1/2 F1960 x 1/4 COMP ANGLE 1/4" - 4" CLD 23 MLTPL
EPXVA1238C 1/2 PEX F1960 X 3/8 COMPRESSION NL 1/4-TURN ANGLE STOP 1/4" - 4" CLD 23 MLTPL
EPXVS1214C 1/2 F1960 x 1/4 COMP STRAIGHT 1/4" - 4" CLD 23 MLTPL
EPXVS1238C 1/2 PEX F1960 X 3/8 COMPRESSION NL 1/4-TURN STRAIGHT STOP 1/4" - 4" CLD 23 MLTPL
WEPXV12 1/2" PEX Expansion Brass Lead Free Ball Valve 1/4" - 4" CLD 23 MLTPL
WEPXV34 3/4" PEX Expansion Brass Lead Free Ball Valve 1/4" - 4" CLD 23 MLTPL
WPXPR12-12PK 1/2" Press x 1/2" F1807 Adapter 1/4" - 4" CLD 23 MLTPL
WPXPR34-12PK 3/4"Press x 3/4" F1807 Adapter 1/4" - 4" CLD 23 MLTPL
ZAPXFF1212S 1/2" PEX x 1/2" FEMALE SWIV ADAPTER 1/4" - 4" CLD 23 MLTPL
ZAPXFF1212SDV 1/2 IN. PEX x 1/2 MPSCH SWIVEL 1/4" - 4" CLD 23 MLTPL
ZAPXV11 1" PEX Brass Lead Free Ball Valve 1/4" - 4" CLD 23 MLTPL
ZAPXV1212 1/2" PEX x 1/2" PEX LF Brass BV 1/4" - 4" CLD 23 MLTPL
ZAPXV3434 3/4" PEX x 3/4" PEX LF Brass BV 1/4" - 4" CLD 23 MLTPL

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



 
The Source Inc. 
2765 Midland Drive
P.O. Box 15026 
Ogden, UT 84401 
United States 
801-732-5484
Visit this company's website


Facility : Ogden, UT

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Filtration Devices/Components[G] [POE]
T2C-075-100 / 131345 6" x 11.875" D. HOT MLTPL
T2C-075-140 / 131346 6" x 11.875" D. HOT MLTPL
T2C-075-200 / 134214 6" x 11.875" D. HOT MLTPL
T2C-075-30 / 131343 6" x 11.875" D. HOT MLTPL
T2C-075-60 / 131344 6" x 11.875" D. HOT MLTPL
T2C-100-100 / 131349 6" x 11.875" D. HOT MLTPL
T2C-100-140 / 131350 6" x 11.875" D. HOT MLTPL
T2C-100-200 / 134215 6" x 11.875" D. HOT MLTPL
T2C-100-30 / 131347 6" x 11.875" D. HOT MLTPL
T2C-100-60 / 131348 6" x 11.875" D. HOT MLTPL
T2C-100B-100 / 131978 6" x 11.875" D. HOT MLTPL
T2C-100B-140 / 131979 6" x 11.875" D. HOT MLTPL
T2C-100B-200 / 134218 6" x 11.875" D. HOT MLTPL
T2C-100B-30 / 131980 6" x 11.875" D. HOT MLTPL
T2C-100B-60 / 131981 6" x 11.875" D. HOT MLTPL
T2C-150-100 / 131555 7.5" x 15.25" D. HOT MLTPL
T2C-150-140 / 131556 7.5" x 15.25" D. HOT MLTPL
T2C-150-200 / 134216 7.5" x 15.25" D. HOT MLTPL
T2C-150-30 / 131553 7.5" x 15.25" D. HOT MLTPL
T2C-150-60 / 131554 7.5" x 15.25" D. HOT MLTPL
T2C-150B-100 / 131982 7.5" x 15.25" D. HOT MLTPL
T2C-150B-140 / 131983 7.5" x 15.25" D. HOT MLTPL
T2C-150B-200 / 134219 7.5" x 15.25" D. HOT MLTPL
T2C-150B-30 / 131984 7.5" x 15.25" D. HOT MLTPL
T2C-150B-60 / 131985 7.5" x 15.25" D. HOT MLTPL

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.
[POE] Certified products are evaluated as point of entry (POE) systems.



 
Thermo Fisher Scientific 
400 Research Parkway
Meriden, CT 06450 
United States 
651-413-3745


Facility : Stafford Springs, CT

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Filtration Devices/Components [G]
Betafine XL(LC)PP(GC)(EMC)(OR)[1] [2] 2.5" CLD 23 MLTPL
Betapure NT(LC)T(GC)(P)(SRO)(EMC)(OR)[3] [4] 2.65" CLD 23 MLTPL
DF Series DFGxxxPPYZ[5] [6] [7] 2.69" CLD 23 MLTPL

[1] Betafine XL, Betafatine XL (LC)PP(GC)(EMC)(OR) variable key:
    
    LC: Length 
        9 to 40 inches
    
    GC:  Grade
         002 - 0.2 MICRON
         005 - 0.5 MICRON
         010 - 1 MICRON
         025 - 2.5 MICRON
         050 - 5 MICRON
         100 - 10 MICRON
         200 - 20 MICRON
         400 - 40 MICRON
         700 - 70 MICRON
    
    EMC: End Modification
         B0 - 226 O'RINGS & SPEAR, NO REINFORCING RING
         B1 - 226 O'RINGS & SPEAR, POLYSULFONE RING
         B2 - 226 O'RINGS & SPEAR, STAINLESS STEEL RING
         C0 - 222 O'RINGS & SPEAR, NO REINFORCING RING
         C1 - 222 O'RINGS & SPEAR, POLYSULFONE RING
         C2 - 222 O'RINGS & SPEAR, STAINLESS STEEL RING
         D  - DOUBLE OPEN END, FLAT GASKET
         F0 - 222 O'RING'S & FLAT CAP, NO REINFORCING RING
         F1 - 222 O'RINGS & FLAT CAP, POLYSULFONE RING
         F2 - 222 O'RINGS & FLAT CAP, STAINLESS STEEL RING
         R  - END CAP WITH SPRING
    
    OR: O-ring:
        A - SILICONE
        M - EPDM
[2] Betafine XL products require a per-service flush at a flow rate of 2 to 3 gpm (gallons
    per minute) per each 10"" of length for 5 minutes with deionized water.
    Betafine XL products are certified for a minimum daily filtrate generation of 1440
    gallons.
[3] Betapure NT-T, BetaPure NT (LC)T(GC)(P)(EMC)(OR) variable key:
    
    LC:  Length
         5 to 40 inches
    
    GC:  Grade designation
         005 - 0.5 µm
         010 - 1 µm
         020 - 2 µm
         030 - 3 µm
         050 - 5 µm
         100 - 10 µm
         200 - 20 µm
         300 - 30 µm
         400 - 40 µm
         500 - 50 µm
         700 - 70 µm
    
    P:   Packaging option
         B - Bulk 
         S - Standard
         Z - Individual 
    
    EMC: End Modification
         B - SOE, 226, O-rings / spear
         C - SOE, 222 O-rings / spear
         D - DOE, flat gaskets
         F - SOE, 222 O-rings / Flat Cap
         L - Film sealed for use in CTG Klean
         M - SOE, 222 O-rings / flat cap, for 1ZMP HSG
         Y - SOE, 222 single O-ring and cap
    
    OR:  Gasket/O-ring material
         A - Silicone
         M - EPDM
[4] Betapure NT-T, BetaPure NT (LC)T(GC)(P)(EMC)(OR) is certified for a minimum daily
    filtration generation of 1440 gallons per 10"" of length.
    
    Betapure NT-T, BetaPure NT (LC)T(GC)(P)(EMC)(OR) requires a per-service flush at 2 to 3
    gallons per minute (gpm) per 10"" of length for 5 minutes.
[5] DF Series DFGxxxPPYZ size 1 requires a pre-service flush at 10 gallons per minute (gpm)
    for 5 minutes with deionized water.
    
    DF Series DFGxxxPPYZ size 2 requires a pre-service flush at 10 gallons per minute (gpm)
    for 10 minutes with deionized water.
[6] DF Series DFGxxxPPYZ size 1 is certified for a minimum daily filtrate generation of
    14,440 gallons.
    
    DF Series DFGxxxPPYZ size 2 is certified for a minimum daily filtrate generation of
    28,800 gallons.
[7] DF Series DFGxxxPPYZ variable key:
    
    xxx: Micron rating
         001 - 1 µm
         005 - 5 µm
         010 - 10 µm
         025 - 25 µm
         050 - 50 µm
         100 - 100 µm
         200 - 200 µm
    
    Y:   Cartridge length
         1 - 16" nominal (1 high)
         2 - 32" nominal (2 high)
    
    Z:   Connection style
         C - Open-cuno standard
         R - Closed-competitor
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



Facility : Charlotte, NC

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Filtration Devices/Components [G]
Liqui-Cel™ EXF-10x28 Series Membrane Contactor, x40 membrane, FRP Vessel[1] 10" x 28" CLD 23 PP
Liqui-Cel™ EXF-10x28 Series Membrane Contactor, x40 membrane, SS Vessel[1] 10" x 28" CLD 23 PP
Liqui-Cel™ EXF-10x28 Series Membrane Contactor, x50 membrane, FRP Vessel[1] 10" x 28" CLD 23 PP
Liqui-Cel™ EXF-10x28 Series Membrane Contactor, x50 membrane, SS Vessel[1] 10" x 28" CLD 23 PP
Liqui-Cel™ EXF-14x28 Series Membrane Contactor, x40 membrane[2] 14" x 28" CLD 23 PP
Liqui-Cel™ EXF-14x28 Series Membrane Contactor, x50 membrane[2] 14" x 28" CLD 23 PP
Liqui-Cel™ EXF-14x40 Series Membrane Contactor, x40 membrane[2] 14" x 40" CLD 23 PP
Liqui-Cel™ EXF-14x40 Series Membrane Contactor, x50 membrane[2] 14" x 40" CLD 23 PP
Liqui-Cel™ EXF-4x28 Series Membrane Contactor, x50 membrane[3] 4" x 28" CLD 23 PP

[1] Trade name Liqui-Cel™ EXF-10x28 Series Membrane Contactor with x40 membrane fiber, FRP
    vessel is certified for a minimum daily flow of 60,000 gallons.
    
    Trade name Liqui-Cel™ EXF-10x28 Series Membrane Contactor with x50 membrane fiber, FRP
    vessel is certified for a minimum daily flow of 60,000 gallons.
    
    Trade name Liqui-Cel™ EXF-10x28 Series Membrane Contactor with x40 membrane fiber, SS
    vessel is certified for a minimum daily flow of 60,000 gallons.
    
    Trade name Liqui-Cel™ EXF-10x28 Series Membrane Contactor with x50 membrane fiber, SS
    vessel is certified for a minimum daily flow of 60,000 gallons.
[2] Trade name Liqui-Cel™ EXF-14x28 Series Membrane Contactor with x40 membrane fiber is
    certified for a minimum daily flow of 100,000 gallons.
    
    Trade name Liqui-Cel™ EXF-14x28 Series Membrane Contactor with x50 membrane fiber is
    certified for a minimum daily flow of 100,000 gallons.
    
    Trade name Liqui-Cel™ EXF-14x40 Series Membrane Contactor with x40 Membrane fiber  is
    certified for a minimum daily flow generation of 144,000 gallons.
    
    Trade name Liqui-Cel™ EXF-14x40 Series Membrane Contactor with x50 Membrane fiber is
    certified for a minimum daily flow generation of 144,000 gallons.
[3] Trade name Liqui-Cel™ EXF 4X28 Series Membrane Contactor with X50 Membrane Fiber is
    certified for a minimum daily flow generation of 5,760 gallons.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



Facility : São Paulo, Brazil

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Filtration Devices/Components [G]
Micro-Klean RT (LC)(GC)16(SC)(PC)(RC)(EMC)(OC)[1] [2] 2.5" CLD 23 MLTPL

[1] Micro-Klean RT, Micro-Klean RT (LC)(GC)16(SC)(PC(RC)(EMC)(OC) variable key:
    
    LC: Length
    10 to 40 inches
    
    GC: Grade Designation
    Y - 1 µm
    B - 5 µm
    C - 10 µm
    F - 25 µm
    L - 50 µm
    Q - 75 µm
    CSW - 2 µm
    
    SC: Surface
    G - Grooved
    U - Ungrooved
    
    PC: Package 
    2 - Bulk / Polybag
    3 - Polybag & Labeled
    4 - Polybag & Labeled (Latina)
    5 - Bulk / No Polybag
    
    RC: Ring Support
    0 - None
    1 - Polysulfone
    2 - Stainless steel
    
    EMC: End Modification
    B - 226 O-RING/SPEAR
    C - 222 O-RING/SPEAR
    F - 222 O-RING/FLAT CAP
    N - DOE
    P - POLYPRO CORE EXTENDER
    R - CAP WITH SPRING
    
    OC: Gasket Material
    A - Silicone
    E - EPDM
[2] Micro-Klean RT, Micro-Klean RT (LC)(GC)16(SC)(PC(RC)(EMC)(OC) is certified for a minimum
    daily filtrate generation of 1440 gallons per 10"" of length.
    Micro-Klean RT, Micro-Klean RT (LC)(GC)16(SC)(PC(RC)(EMC)(OC) requires a pre-service
    flush at a flow rate of 2 to 3 gallons per minute (gpm) per 10"" of length for 5 minutes
    with deionized water.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



Facility : Guangzhou, China

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Filtration Devices/Components [G]
Betafine XL, Betafine XL (LC)PP(GC)(EMC)(OR)[1] [2] [3] 2.5" CLD 23 MLTPL
High Flow Filter Element HF-WW-PP-XXX-Y-Z[4] [5] [6] [7] 6.52" CLD 23 MLTPL
High Flow Series HFM-XX-YY-ZZZ-Q[4] [5] [6] [8] N/A CLD 23 MLTPL
Micro-Klean RT (LC)(GC)16(SC)(PC)(RC)(EMC)(OC)[9] [10] [11] 2.5" CLD 23 MLTPL

[1] Betafine XL products require a per-service flush at a flow rate of 2 to 3 gpm (gallons
    per minute) per each 10" of length for 5 minutes with deionized water.
[2] Betafine XL products are certified for a minimum daily filtrate generation of 1440
    gallons.
[3] Betafine XL, Betafatine XL (LC)PP(GC)(EMC)(OR) variable key:
    
    LC:  Length 
         9 to 40 inches
    
    GC:  Grade
         002 - 0.2 MICRON
         005 - 0.5 MICRON
         010 - 1 MICRON
         025 - 2.5 MICRON
         050 - 5 MICRON
         100 - 10 MICRON
         200 - 20 MICRON
         400 - 40 MICRON
         700 - 70 MICRON
    
    EMC: End Modification
         B0 - 226 O'RINGS & SPEAR, NO REINFORCING RING
         B1 - 226 O'RINGS & SPEAR, POLYSULFONE RING
         B2 - 226 O'RINGS & SPEAR, STAINLESS STEEL RING
         C0 - 222 O'RINGS & SPEAR, NO REINFORCING RING
         C1 - 222 O'RINGS & SPEAR, POLYSULFONE RING
         C2 - 222 O'RINGS & SPEAR, STAINLESS STEEL RING
         D  - DOUBLE OPEN END, FLAT GASKET
         F0 - 222 O'RING'S & FLAT CAP, NO REINFORCING RING
         F1 - 222 O'RINGS & FLAT CAP, POLYSULFONE RING
         F2 - 222 O'RINGS & FLAT CAP, STAINLESS STEEL RING
         R  - END CAP WITH SPRING
    
    OR:  O-ring:
         A - SILICONE
         M - EPDM
[4] 3M™ High Flow Series Filter Cartridges, HF-WW-PP-XXX-Y-Z is certified for a minimum
    daily filtrate generation of 21,600 gallons per 10" of length.
[5] 3M™ High Flow Series Filter Cartridges, HF-WW-PP-XXX-Y-Z requires a pre-service flush at
    10 gallons per minute (gpm) per 10" of length for 10 minutes with deionized water.
[6] Certified for a minimum flow rate of 65,000 L/day.
[7] WW  - Length of cartridge (in inches) - 40 or 60 
    PP  - Polypropylene 
    XXX - Removal rating
          0005 - 0.5 micron 
          001  - 1 micron
          002  - 2 micron 
          005  - 5 micron 
          010  - 10 micron 
          015  - 15 micron 
          025  - 25 micron 
          040  - 40 micron 
          070  - 70 micron 
    Y -   End o-ring type 
    A -   Silicone
    B -   Fluorocarbon 
    C -   EPR 
    D -   Nitrile 
    Z -   Packaging option (number of filters per box) 01
        - 1 pack 04 - 4 pack
[8] XX:  Length 10 - 10" nominal, 40 - 40" nominal 60 - 60" nominal. 
    YY:  Material 
         PP - Polypropylene 
    ZZZ: Micron Grade 
         N05=5 micron nominal
         A05=5 micron absolute
         A10=10 micron absolute
         A20=20 micron absolute
    Q -  End O-ring Type 
         A -  Silicone 
         D -  Nitrile
[9] Micro-Klean RT, Micro-Klean RT (LC)(GC)16(SC)(PC(RC)(EMC)(OC) requires a pre-service
    flush at a flow rate of 2 to 3 gallons per minute (gpm) per 10" of length for 5 minutes
    with deionized water.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.
[10] Micro-Klean RT, Micro-Klean RT (LC)(GC)16(SC)(PC(RC)(EMC)(OC) is certified for a minimum
     daily filtrate generation of 1440 gallons per 10" of length.
[11] LC denotes length (09, 10, 19, 20, 29, 30, 39, or 40); GC denotes micron rating (002,
     005, 010, 025, 050, 100, 200, 400, or 700); EMC denotes end treatment (B0, B1, B2, C0,
     C1, C2, D, F0, F1, or F2); OR denotes o-ring material (A, B, C, or D).



Facility : Wuppertal, Germany

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Filtration Devices/Components [G]
Liqui-Cel™ EXF-10x28 Series Membrane Contactor, x40 membrane, FRP Vessel[1] 10" x 28" CLD 23 PP
Liqui-Cel™ EXF-10x28 Series Membrane Contactor, x40 membrane, SS Vessel[1] 10" x 28" CLD 23 PP
Liqui-Cel™ EXF-10x28 Series Membrane Contactor, x50 membrane, FRP Vessel[1] 10" x 28" CLD 23 PP
Liqui-Cel™ EXF-10x28 Series Membrane Contactor, x50 membrane, SS Vessel[1] 10" x 28" CLD 23 PP
Liqui-Cel™ EXF-14x28 Series Membrane Contactor, x40 membrane[2] 14" x 28" CLD 23 PP
Liqui-Cel™ EXF-14x28 Series Membrane Contactor, x50 membrane[2] 14" x 28" CLD 23 PP
Liqui-Cel™ EXF-14x40 Series Membrane Contactor, x40 membrane[2] 14" x 40" CLD 23 PP
Liqui-Cel™ EXF-14x40 Series Membrane Contactor, x50 membrane[2] 14" x 40" CLD 23 PP

[1] Trade name Liqui-Cel™ EXF-10x28 Series Membrane Contactor with x40 membrane fiber, FRP
    vessel is certified for a minimum daily flow of 60,000 gallons.
    
    Trade name Liqui-Cel™ EXF-10x28 Series Membrane Contactor with x50 membrane fiber, FRP
    vessel is certified for a minimum daily flow of 60,000 gallons.
    
    Trade name Liqui-Cel™ EXF-10x28 Series Membrane Contactor with x40 membrane fiber, SS
    vessel is certified for a minimum daily flow of 60,000 gallons.
    
    Trade name Liqui-Cel™ EXF-10x28 Series Membrane Contactor with x50 membrane fiber, SS
    vessel is certified for a minimum daily flow of 60,000 gallons
[2] Trade name Liqui-Cel™ EXF-14x28 Series Membrane Contactor with x40 membrane fiber is
    certified for a minimum daily flow of 100,000 gallons.
    
    Trade name Liqui-Cel™ EXF-14x28 Series Membrane Contactor with x50 membrane fiber is
    certified for a minimum daily flow of 100,000 gallons.
    
    Trade name Liqui-Cel™ EXF-14x40 Series Membrane Contactor with x40 Membrane fiber is
    certified for a minimum daily flow of 144,000 gallons.
    
    Trade name Liqui-Cel™ EXF-14x40 Series Membrane Contactor with x50 Membrane fiber is
    certified for a minimum daily flow of 144,000 gallons.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



Facility : Nuevo Léon, Mexico

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Filtration Devices/Components [G]
3M™ 740 Series Filter Cartridges, 740-Q-RR-SS-XXX-Y-Z[1] [2] [3] 6.52" CLD 23 MLTPL
High Flow Filter Element HF-WW-PP-XXX-Y-Z[4] [5] N/A CLD 23 MLTPL
High Flow Series HFM-XX-YY-ZZZ-Q[4] [6] N/A CLD 23 MLTPL
Micro-Klean RT (LC)(GC)16(SC)(PC)(RC)(EMC)(OC)[7] [8] [9] 2.5" CLD 23 MLTPL
Micro-Klean RW (XX)(X17)(A)(B)0(C)(D)[10] [11] 2.5" CLD 23 MLTPL

[1] 3M™ High Flow HFM Series Filter Cartridges, 740-Q-RR-SS-XXX-Y-Z is certified for a
    minimum daily filtrate generation of 27,000 gallons per 30" of length.
[2] 3M™ High Flow HFM Series Filter Cartridges, 740-Q-RR-SS-XXX-Y-Z 30" requires a
    pre-service flush at 10 gallons per minute (GPM) for 10 minutes.
    
    3M™ High Flow HFM Series Filter Cartridges, 740-Q-RR-SS-XXX-Y-Z 40"" requires a
    pre-service flush at 10 gallons per minute (GPM) for 15 minutes.
[3] 3M™ High Flow HFM Series Filter Cartridges, 740-Q-RR-SS-XXX-Y-Z variable key:
    
    Q:   Construction
         B - Standard
         K - Reduced filter area
    
    RR:  Length
         30 - 30 nominal
         40 - 40 nominal
    
    SS:  Material
         PP - Polypropylene
         EE - Polyester
    
    XXX: Micron rating:
         001 - 1 um
         002 - 2 um
         005 - 5 um
         010 - 10 um
         015 - 15 um
    
    Y:   Gasket material
         A - Silicone
         C - EPDM
    
    Z:   Packaging
         1 - 1/case
         2 - 30/case
         3 - 37/case
[4] 3M™ High Flow Series Filter Cartridges, HF-WW-PP-XXX-Y-Z & 3M™ High Flow HFM Series
    Filter Cartridges, HFM-XX-YY-ZZZ-Q are certified for a minimum daily filtrate generation
    of 21,600 gallons per 10" of length.
    
    3M™ High Flow Series Filter Cartridges, HF-WW-PP-XXX-Y-Z  & 3M™ High Flow HFM Series
    Filter Cartridges, HFM-XX-YY-ZZZ-Q requires a pre-service flush at 10 gallons per minute
    (gpm) per 10" of length for 10 minutes with deionized water.
[5] 3M™ High Flow Series Filter Cartridges, HF-WW-PP-XXX-Y-Z variable key:
    
    WW:  Length
         10 - 10" nominal
         40 - 40" nominal
         60 - 60" nominal
    
    XXX: Grade
         001 - 1 um
         002 - 2 um
         005 - 5 um
         010 - 10 um
         015 - 15 um
         025 - 25 um
         040 - 40 um
         070 - 70 um
    
    Y:   O-ring material
    A:   Silicone
    B:   Fluorocarbon
    C:   EPR
    D:   Nitrile
    
    Z:   Packaged quantity
         01 - single pack
[6] 3M™ High Flow HFM Series Filter Cartridges, HFM-XX-YY-ZZZ-Q key:
    
    XX:  Length
         10 - 10" nominal
         40 - 40" nominal
         60 - 60" nominal
    
    YY:  Construction
         PP - Polypropylene
    
    ZZZ: Grade
         N05 - 5 micron nominal (70 micron absolute)
         A05 - 5 micron absolute
         A10 - 10 micron absolute
         A20 - 20 micron absolute
         A40 - 40 micron absolute
[7] LC:  Length
         10 to 40 inches
    
    GC:  Grade Designation
         Y   - 1 µm
         B   - 5 µm
         C   - 10 µm
         F   - 25 µm
         L   - 50 µm
         Q   - 75 µm
         CSW - 2 µm
    
    SC:  Surface
         G - Grooved
         U - Ungrooved
    
    PC:  Package 
         2 - Bulk / Polybag
         3 - Polybag & Labeled
         4 - Polybag & Labeled (Latina)
         5 - Bulk / No Polybag
    
    RC:  Ring Support
         0 - None
         1 - Polysulfone
         2 - Stainless steel
    
    EMC: End Modification
         B - 226 O-RING/SPEAR
         C - 222 O-RING/SPEAR
         F - 222 O-RING/FLAT CAP
         N - DOE
         P - POLYPRO CORE EXTENDER
         R - CAP WITH SPRING
    
    OC:  Gasket Material
         A - Silicone
         E - EPDM
[8] Micro-Klean RT, Micro-Klean RT (LC)(GC)16(SC)(PC(RC)(EMC)(OC) is certified for a minimum
    daily filtrate generation of 1440 gallons per 10" of length.
[9] Micro-Klean RT, Micro-Klean RT (LC)(GC)16(SC)(PC(RC)(EMC)(OC) requires a pre-service
    flush at a flow rate of 2 to 3 gallons per minute (gpm) per 10" of length for 5 minutes
    with deionized water.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.
[10] Micro-Klean RW, Micro-Klean RW(XX)(X17)(A)(B)0(C)(D) variable key:
     
     XX: Length
         10 to 40 inches
     
     X:  Grade Designation
         Y - 1 µm
         B - 5 µm
     
     A:  Surface
         G - Grooved
     
     B:  Package
         2 - Bulk / Polybag
     
     C:  End Modification
         C - 222 O-RING/SPEAR
         F - 222 O-RING/FLAT CAP
         N - DOE
         1 - 222 O-RING/ PLASTIC SPRING
         R - PLASTIC SPRING
     
     D:  Gasket
         A - Silicone
         N - None
[11] Micro-Klean RW, Micro-Klean RW(XX)(X17)(A)(B)0(C)(D) is certified for a minimum daily
     filtrate generation of 1440 gallons per 10" of length.
     
     Micro-Klean RW, Micro-Klean RW(XX)(X17)(A)(B)0(C)(D) requires a pre-service flush at a
     flow rate of 2 to 3 gallons per minute (gpm) per 10" of length for 5 minutes with
     deionized water.



Facility : Kwidzynska, Poland

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Filtration Devices/Components [G]
Micro-Klean RT (LC)(GC)16(SC)(PC)(RC)(EMC)(OC)[1] [2] N/A CLD 23 MLTPL

[1] Micro-Klean RT, Micro-Klean RT (LC)(GC)16(SC)(PC(RC)(EMC)(OC) variable key:
    
    LC:  Length
         10 to 40 inches
    
    GC:  Grade Designation
         Y   - 1 µm
         B   - 5 µm
         C   - 10 µm
         F   - 25 µm
         L   - 50 µm
         Q   - 75 µm
         CSW - 2 µm
    
    SC:  Surface
         G - Grooved
         U - Ungrooved
    
    PC:  Package 
         2 - Bulk / Polybag
         3 - Polybag & Labeled
         4 - Polybag & Labeled (Latina)
         5 - Bulk / No Polybag
    
    RC:  Ring Support
         0 - None
         1 - Polysulfone
         2 - Stainless steel
    
    EMC: End Modification
         B - 226 O-RING/SPEAR
         C - 222 O-RING/SPEAR
         F - 222 O-RING/FLAT CAP
         N - DOE
         P - POLYPRO CORE EXTENDER
         R - CAP WITH SPRING
    
    OC:  Gasket Material
         A - Silicone
         E - EPDM
[2] Micro-Klean RT, Micro-Klean RT (LC)(GC)16(SC)(PC(RC)(EMC)(OC) is certified for a minimum
    daily filtrate generation of 1440 gallons per 10" of length.
    
    Micro-Klean RT, Micro-Klean RT (LC)(GC)16(SC)(PC(RC)(EMC)(OC) requires a pre-service
    flush at a flow rate of 2 to 3 gallons per minute (gpm) per 10" of length for 5 minutes
    with deionized water.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



 
Tianjin Dongyi Magnesium Products Co., LTD 
No.26 Fufa Road
Jing-jin Technology Valley 
Wuqing District, Tianjin 301700 
China 
86 22 59621606


Facility : Tianjin, China

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Sacrificial Anodes[G]
221954 REV A 5 gal. - 300 gal. C. HOT MLTPL
222030 REV C 5 gal. - 300 gal. C. HOT MLTPL
222031 REV D 5 gal. - 300 gal. C. HOT MLTPL
222032 REV 5 gal. - 300 gal. C. HOT MLTPL
222033 REV D 5 gal. - 300 gal. C. HOT MLTPL
69716 5 gal. - 300 gal. C. HOT MLTPL
69717 5 gal. - 300 gal. C. HOT MLTPL
69718 5 gal. - 300 gal. C. HOT MLTPL
69719 5 gal. - 300 gal. C. HOT MLTPL
69900 5 gal. - 300 gal. C. HOT MLTPL
FAW-00983-AZ31B-019.375-S3 5 gal. - 300 gal. C. HOT MLTPL
FAW-00983-AZ31B-022.375-S3 5 gal. - 300 gal. C. HOT MLTPL
FAW-00983-AZ31B-024.375-S3 5 gal. - 300 gal. C. HOT MLTPL
FAW-00983-AZ31B-025.375-S3 5 gal. - 300 gal. C. HOT MLTPL
FAW-00983-AZ31B-030.375-S3 5 gal. - 300 gal. C. HOT MLTPL
FAW-00983-AZ31B-039.375-S3 5 gal. - 300 gal. C. HOT MLTPL
FAW-00983-AZ31B-044.375-S3 5 gal. - 300 gal. C. HOT MLTPL
FAW-00983-AZ31B-050.375-S3 5 gal. - 300 gal. C. HOT MLTPL
FAW-00983-AZ31B-053.375-S3 5 gal. - 300 gal. C. HOT MLTPL
FAW-00983-AZ31B-056.375-S3 5 gal. - 300 gal. C. HOT MLTPL
FAW-01070-AZ31B-010.375-S2 5 gal. - 300 gal. C. HOT MLTPL
FAW-01070-AZ31B-011.375-S2 5 gal. - 300 gal. C. HOT MLTPL
FAW-01070-AZ31B-013.375-S2 5 gal. - 300 gal. C. HOT MLTPL
FAW-01070-AZ31B-015.375-S2 5 gal. - 300 gal. C. HOT MLTPL
FAW-01070-AZ31B-019.375-S2 5 gal. - 300 gal. C. HOT MLTPL
FAW-01070-AZ31B-022.375-S2 5 gal. - 300 gal. C. HOT MLTPL
FAW-01070-AZ31B-023.375-S2 5 gal. - 300 gal. C. HOT MLTPL
FAW-01070-AZ31B-024.375-S2 5 gal. - 300 gal. C. HOT MLTPL
FAW-01070-AZ31B-025.375-S2 5 gal. - 300 gal. C. HOT MLTPL
FAW-01070-AZ31B-028.375-S2 5 gal. - 300 gal. C. HOT MLTPL
FAW-01070-AZ31B-030.375-S2 5 gal. - 300 gal. C. HOT MLTPL
FAW-01070-AZ31B-034.375-S2 5 gal. - 300 gal. C. HOT MLTPL
FAW-01070-AZ31B-039.375-S2 5 gal. - 300 gal. C. HOT MLTPL
FAW-01070-AZ31B-044.375-S2 5 gal. - 300 gal. C. HOT MLTPL
FAW-01070-AZ31B-050.375-S2 5 gal. - 300 gal. C. HOT MLTPL
FAW-01070-AZ31B-053.375-S2 5 gal. - 300 gal. C. HOT MLTPL
FAW-04400-AZ31B-011.375-S1-RM 5 gal. - 300 gal. C. HOT MLTPL
FAW-04400-AZ31B-015.375-S1-RM 5 gal. - 300 gal. C. HOT MLTPL
FAW-04400-AZ31B-019.375-S1-RM 5 gal. - 300 gal. C. HOT MLTPL
FAW-04400-AZ31B-024.375-S1-RM 5 gal. - 300 gal. C. HOT MLTPL
FAW-04400-AZ31B-025.375-S1-RM 5 gal. - 300 gal. C. HOT MLTPL
FAW-04400-AZ31B-030.375-S1-RM 5 gal. - 300 gal. C. HOT MLTPL
FAW-04400-AZ31B-034.375-S1-RM 5 gal. - 300 gal. C. HOT MLTPL
FAW-04400-AZ31B-039.375-S1-RM 5 gal. - 300 gal. C. HOT MLTPL
FAW-04400-AZ31B-044.375-S1-RM 5 gal. - 300 gal. C. HOT MLTPL
FAW-04400-AZ31B-050.375-S1-RM 5 gal. - 300 gal. C. HOT MLTPL
FAW-06826-AZ31B-022.375-S3 5 gal. - 300 gal. C. HOT MLTPL
FAW-06826-AZ31B-024.375-S3 5 gal. - 300 gal. C. HOT MLTPL
FAW-06826-AZ31B-025.375-S3 5 gal. - 300 gal. C. HOT MLTPL
FAW-06826-AZ31B-034.188-S3-RC 5 gal. - 300 gal. C. HOT MLTPL
FAW-06826-AZ31B-034.375-S3 5 gal. - 300 gal. C. HOT MLTPL
FAW-06826-AZ31B-039.375-S3 5 gal. - 300 gal. C. HOT MLTPL
FAW-06826-AZ31B-042.188-S3-RC 5 gal. - 300 gal. C. HOT MLTPL
FAW-06826-AZ31B-042.375-S3 5 gal. - 300 gal. C. HOT MLTPL
FAW-06826-AZ31B-044.375-S3 5 gal. - 300 gal. C. HOT MLTPL
FAW-06826-AZ31B-048.375-S3 5 gal. - 300 gal. C. HOT MLTPL
FAW-06826-AZ31B-050.375-S3 5 gal. - 300 gal. C. HOT MLTPL
FAW-06826-AZ31B-053.375-S3 5 gal. - 300 gal. C. HOT MLTPL

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



 
Tianjin FSK Flow Control Equipment Co., Ltd. 
No. 5, Keda 3rd Road
TEDA Technic Park, Jinnan District 
Tianjin 300350 
China 
86 16622383527
Visit this company's website


Facility : Tianjin, China

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Valves [G]
AWWA C504 Butterfly Valve 3" - 72" CLD 23 MLTPL

[1] Certified for use in distribution systems only.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



 
Tianjin Galaxy Valve Co., Ltd. 
No. 15 Tianhua Road
Balitai Industrial Area 
Tianjin 300350 
China 
86 133 3202 7165


Facility : Tianjin, China

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Fire Hydrants[G]
F1511 6" CLD 23 MLTPL

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

Valves[G]
Center Line-Type Butterfly Valve-2300 Series 2" - 24" CLD 23 MLTPL
Center Line-Type Butterfly Valve-2302A 2" - 24" CLD 23 MLTPL
Center Line-Type Butterfly Valve-2302V 2" - 24" CLD 23 MLTPL
Center Line-Type Butterfly Valve-2309 2" - 24" CLD 23 MLTPL
Center Line-Type Butterfly Valve-2330 2" - 24" CLD 23 MLTPL
Center Line-Type Butterfly Valve-2349 2" - 24" CLD 23 MLTPL
Center Line-Type Butterfly Valve-2500 Series 2" - 24" CLD 23 MLTPL
Center Line-Type Butterfly Valve-2502A 2" - 24" CLD 23 MLTPL
Center Line-Type Butterfly Valve-2502V 2" - 24" CLD 23 MLTPL
Center Line-Type Butterfly Valve-2509 2" - 24" CLD 23 MLTPL
Center Line-Type Butterfly Valve-2530 2" - 24" CLD 23 MLTPL
Center Line-Type Butterfly Valve-2549 2" - 24" CLD 23 MLTPL
Center Line-Type Butterfly Valve-25GG 2" - 24" CLD 23 MLTPL
Center Line-Type Butterfly Valve-25GT 2" - 24" CLD 23 MLTPL
Center Line-Type Butterfly Valve-25GTC 2" - 24" CLD 23 MLTPL
Center Line-Type Butterfly Valve-25L 2" - 24" CLD 23 MLTPL
Center Line-Type Butterfly Valve-25W 2" - 24" CLD 23 MLTPL
Center Line-Type Butterfly Valve-25WC 2" - 24" CLD 23 MLTPL
Center Line-Type Butterfly Valve-35GG 2" - 24" CLD 23 MLTPL
Double Eccentric Rubber Sealing Flange Butterfly Valve 2630 8" - 48" CLD 23 MLTPL
Double Eccentric Rubber Sealing Flange Butterfly Valve-2600 Series 8" - 48" CLD 23 MLTPL
Double Eccentric Rubber Sealing Flange Butterfly Valve-2688 8" - 48" CLD 23 MLTPL
Double Eccentric Rubber Sealing Flange Butterfly Valve-36GG 8" - 48" CLD 23 MLTPL
Double flange Butterfly Valve-2100 Series 2" - 24" CLD 23 MLTPL
Double flange Butterfly Valve-2102 2" - 24" CLD 23 MLTPL
Double flange Butterfly Valve-2122 2" - 24" CLD 23 MLTPL
Double flange Butterfly Valve-2123 2" - 24" CLD 23 MLTPL
Dual-plate Wafer Check Valve-50W 2" - 24" CLD 23 MLTPL
Dual-plate Wafer Check Valve-5300 Series 2" - 24" CLD 23 MLTPL
Dual-plate Wafer Check Valve-5306 2" - 24" CLD 23 MLTPL
Dual-plate Wafer Check Valve-5307 2" - 24" CLD 23 MLTPL
Dual-plate Wafer Check Valve-5309 2" - 24" CLD 23 MLTPL
Y- Strainers-70FF 2" - 24" CLD 23 MLTPL
Y- Strainers-70FG 2" - 24" CLD 23 MLTPL

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



Facility : Rayong, Thailand

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Valves [G]
Y- Strainers-70FF [1] CLD 23 MLTPL

[1] Certified for a size range of 4 - 24 in.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



 
Tianjin Motimo Membrane Technology Group Ltd. 
No. 60, 11th Street, Teda
Tianjin 300457 
China 
86 22 66230233
Visit this company's website


Facility : Tianjin, China

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Ultrafiltration Devices[1] [2] [3] [4]
SF-6** 190 x 1693 mm CLD 23 MLTPL
ST-6** 190 x 1693 mm CLD 23 MLTPL

[1] Only products bearing the NSF Mark on the product, product packaging, and/or
    documentation shipped with the product are Certified.
[2] Certified for a minimum daily flow of 29,400 liters.
[3] Procedure for flushing preservative prior to use: 
    
    1. Surface Flushing: flush directly with water for 15 to 30 minutes or soak in a water
    for 1 to 2 hours, changing the water every 30 minutes.
     
    2. Internal flushing: Soak in a water sink for 72 hours, change the water every 12 hours.
[4] ** refers to the number of fibers and may be any number from 35-60.



 
Tianjin Tian Gong New Material Technology Co., Ltd. 
No. 4 Taijin Road
Zhangjiawo Industrial Zone 
Xiqing, Tianjin 300380 
China 
86 22 8399 0331
Visit this company's website


Facility : Tianjin, China

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Reverse Osmosis Element[1] [2] [3]
BW30FR-400/34 8" x 40" CLD 23 MLTPL
FR-4040 4" x 40" CLD 23 MLTPL
FR-8040 8" x 40" CLD 23 MLTPL
FR-8040-365/36 8" x 40" CLD 23 MLTPL
FR-8040-400/34 8" x 40" CLD 23 MLTPL
LE-4040-HF 4" x 40" CLD 23 MLTPL
NF-4040 4" x 40" CLD 23 MLTPL
NF-4040-30 4" x 40" CLD 23 MLTPL
NF-4040-90 4" x 40" CLD 23 MLTPL
NF-8040 8" x 40" CLD 23 MLTPL
NF-8040-30 8" x 40" CLD 23 MLTPL
NF-8040-90 8" x 40" CLD 23 MLTPL

[1] LE-2521 and SW-2521 models are flushed at a flow rate of 6.2 gallons per minute for 90
    minutes with DI water.
    SW-2540 and LE-2540 models are flushed at a flow rate of 6.5 gallons per minute for 90
    minutes with DI water.
    SW-4021 and LE-4021 models are flushed at a flow rate of 6.9 gallons per minute for 90
    minutes with DI water.
    LE-4040-HF is flushed at a flow rate of 7.7 gallons per minute for 90 minutes with DI
    water.
    BW-4040 and FR-4040 models are flushed at a flow rate of 7.8 gallons per minute for 90
    minutes with DI water.
    LE-4040-HR is flushed at a flow rate of 7.9 gallons per minute for 90 minutes with DI
    water.
    SW-4040 is flushed at a flow rate of 8 gallons per minute for 90 minutes with DI water.
    LE-4040 is flushed at a flow rate of 8.1 gallons per minute for 90 minutes with DI
    water.
    BW30-400 is flushed at a flow rate of 8.2 gallons per minute for 90 minutes with DI
    water.
    NF-4040-30, BW30FR-400/34 and NF-4040 models are flushed at a flow rate of 8.3 gallons
    per minute for 90 minutes with DI water.
    NF-4040-90 is flushed at a flow rate of 8.4 gallons per minute for 90 minutes with DI
    water.
    FR-8040 is flushed at a flow rate of 10 gallons per minute for 90 minutes with DI water.
    FR-8040-365/36 is flushed at a flow rate of 10.2 gallons per minute for 90 minutes with
    DI water.
    FR-8040-400/34 and SW-8040 models are flushed at a flow rate of 10.3 gallons per minute
    for 90 minutes with DI water.
    BW-8040-400, NF-8040-30 and NF-8040-90 models are flushed at a flow rate of 10.5 gallons
    per minute for 90 minutes with DI water.
    BW-8040 and LE-8040-400 models are flushed at a flow rate of 10.8 gallons per minute for
    90 minutes with DI water.
    LE-8040 and NF-8040 models are flushed at a flow rate of 10.9 gallons per minute for 90
    minutes with DI water.
[2] LE-2521 and SW-2521 models are Certified to a minimum daily flow of 288 gallons per day.
    LE-2540 is Certified for a minimum daily flow of 760 gallons per day.
    SW-2540 is Certified for a minimum daily flow of 770 gallons per day.
    SW-4021 is Certified for a minimum daily flow of 1160 gallons per day.
    LE-4021 is Certified for minimum daily flow of 1200 gallons per day.
    FR-4040 is Certified for a minimum daily flow of 2200 gallons per day.
    BW-4040 is Certified for a minimum daily flow of 2400 gallons per day.
    LE-4040-HR, LE-4040 and NF-4040-30 models are Certified for a minimum daily flow of 2800
    gallons per day.
    SW-4040 and NF-4040-90 models are Certified for a minimum daily flow of 2900 gallons per
    day.
    NF-4040 is Certified for a minimum daily flow of 3000 gallons per day.
    LE-4040-HF is Certified for a minimum daily flow of 3300 gallons per day.
    FR-8040-365/36 is Certified for a minimum daily flow of 9500 gallons per day.
    BW-8040 and FR-8040-400/34 models are Certified for a minimum daily flow of 10000
    gallons per day.
    FR-8040 is Certified for a minimum daily flow of 10080 gallons per day.
    NF-8040-30 is Certified for a minimum daily flow of 10300 gallons per day.
    NF-8040-90 is Certified for a minimum daily flow of 10400 gallons per day.
    BW-8040-400 and BW30-400 are Certified for a minimum daily flow of 10600 gallons per
    day.
    BW30FR-400/34 is Certified for a minimum daily flow of 10800 gallons per day.
    LE-8040 is Certified for a minimum daily flow of 11000 gallons per day.
    NF-8040 is Certified for a minimum daily flow of 11600 gallons per day.
    LE-8040-400 is Certified for a minimum daily flow of 12500 gallons per day.
    SW-8040 is Certified for a minimum daily flow of 13300 gallons per day.
[3] Abbreviations at the beginning of the trade names indicate the following:
    SW - Seawater
    LE - Low Pressure
    BW - Brackish Water
    FR - Anti-Pollution
    NF - High Output



 
TMSS France 
Tour Eqho - 2 avenue Gambetta
Courbevoie 92400 
France 
33 5 79 89 07 49


Facility : Apodaca, Nuevo Léon, Mexico

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Switches/Sensors
9013F(A)(B)(CC)(DDD)(E)[G] [1] CLD 23 MLTPL

[1] The following configurations are Certified:					
    (A) - Mechanism type						
          R - Reverse action						
          S - Standard adjustable differential
          T - Non-adjustable differential						
          Y - Higher HP with adjustable differential		
    (B) - Enclosure type						
          G - NEMA1 General Purpose Electrical Enclosure		
          W - NEMA3R Outdoor Electrical Enclosure
    (CC) - Fluid connection type						
           1 - 1/8" NPSF internal threads					
           2, 12, 22, 32, 42, 52, 62, 72, 82, 92 - 1/4" NPSF internal 					
           4 - Narrow Differential						
           8, 18, 28, 38, 48, 58, 68, 78, 88, 98 - 1/4" Flare
           9, 19, 29, 39, 49, 59, 89, 99 - 1/4" NPT internal 						
           10 - 1/4" Bayonet, barbed						
    (DDD) - Pressure Regulation						
            J15 - J99						
    (E) - Form (Optional)						
          BP   - Box pack for consumer products
          CP   - Clam pack for consumer products
          C16  - Standard pack of 16 devices per box. Applies for product with Forms 
                 T.
          C20  - Standard pack of 20 devices per box. Applies for product with Forms 
                 M1, M3, M4, M5, and product without Forms M1, M3, M4, M5, T.					
          C40  - Standard pack of 40 devices per box. Applies for product with Forms 
                 M1, M3, M4, M5.
          C50  - Standard pack of 50 devices per box. Applies for product without 
                 Forms M1, M3, M4, M5, T.		
          C400 - Standard pack of 400 devices per box. Applies for product without 
                 Forms M1, M3, M4, M5, T.		
          H    - One normally open - one normally closed contact. Applies to FRG-2 
                 Pole.	
          M1   - Maintained manual cut-out lever (Auto-off). Applies to FSG, FYG.			
          M3   - Momentarily manual cut-in lever (Auto-start). Applies to FSG2-59 
                 only.		
          M4   - Low pressure cut-off (auto-start-off). Operates at approximately 10 
                 psig below cut-in and will turn off the pump. Applies to FSG and 
                 FYG.
          M5   - Maintained manual cut-in lever (auto-on). Applies to FRG2-59 only			
          P    - Pulsation plug - Type 2 & 9 only. Applies to FRG, FSG, FYG					      
          Q8   - Plastic flange (max temp 120°F, max pressure 80 psi). Applies to 
                 FSG, FYG, FRG. Available only in types FGS2, FYG2, FRG2, FSG*2, 
                 FYG*2, FRG*2. 
                 Applies to 1/4" NPSF internal only.
          T    - 1/2" conduit bushing - 1/2" long thread - on left. Applies to all 
                 Type F.						
          U    - Slip-on connectors (load side terminals only). Applies to FSG FYG.			
          U2   - Slip-on connectors (line and load terminals). Applies to FSG and 
                 FYG.		
          Z22  - Black cover. Applies to FSG, FYG.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

NOTE: NSF has not conducted production control audits at this facility. Product Listing is
      based on type testing [ISO/TEC Guide 2: 1996(E/F/R) 14.5]


 
TODAY WATER EQUIPMENT CO., LTD. 
1 F., No. 26, Zhenping Lane
Zhenping Village, Nantun 
District, Taichung 408 
Taiwan 
886 978 803 801


Facility : Taichung, Taiwan

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Filter Underdrain
Dual Lateral Underdrain 28 x 30 cm CLD 23 HDPE



 
Top Shelf Manufacturing, Inc. 
800 Bronze Road NE
Warren, OH 44483 
United States 
844 974 2400


Facility : #1 China

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Fittings[G]
TruuFlo PF6 1/2" - 2" C. HOT BRASS

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



 
Toray Advanced Materials Korea Inc. 
6F, 7, Magokdong-ro 10-gil
Gangseo-gu, Seoul 07790 
Republic of Korea 
82 23 279 7000
Visit this company's website


Facility : Gyeongsangbuk-do, Republic of Korea

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Reverse Osmosis Element [1]
NE4040-90F# [2] 4" x 40" CLD 23 MLTPL
NE4040-90HF# [2] 4" x 40" CLD 23 MLTPL
NE8040-90F# [2] 8" x 40" CLD 23 MLTPL
NE8040-90HF# [2] 8" x 40" CLD 23 MLTPL
RE16040-FE# [3] 16" x 40" CLD 23 MLTPL
RE16040-FEn# [3] 16" x 40" CLD 23 MLTPL
RE16040-SHF# [3] 16" x 40" CLD 23 MLTPL
RE4021-BLF# [5] [6] 4" x 21" CLD 23 MLTPL
RE4040-BLF# [2] 4" x 40" CLD 23 MLTPL
RE8040-BLF# [2] 8" x 40" CLD 23 MLTPL
RE8040-BLF440# [3] 8" x 40" CLD 23 MLTPL
RE8040-FDn# [3] 8" x 40" CLD 23 MLTPL
RE8040-FE# [3] 8" x 40" CLD 23 MLTPL
RE8040-FEN34# [2] 8" x 40" CLD 23 MLTPL
RE8040-FEn[3] 8" x 40" CLD 23 MLTPL
RE8040-FEn440# [3] 8" x 40" CLD 23 MLTPL
RE8040-FLF# [2] 8" x 40" CLD 23 MLTPL
RE8040-FLF34# [2] 8" x 40" CLD 23 MLTPL
RE8040-FLF440# [3] 8" x 40" CLD 23 MLTPL
RE8040-FLR# [5] [6] 8" x 40" CLD 23 MLTPL
RE8040-FLR34# [2] 8" x 40" CLD 23 MLTPL
RE8040-FLR440# [5] [6] 8" x 40" CLD 23 MLTPL
RE8040-FN# [3] 8" x 40" CLD 23 MLTPL
RE8040-SFR# [5] [6] 8" x 40" CLD 23 MLTPL
RE8040-SHF# [3] 8" x 40" CLD 23 MLTPL
RE8040-SHF400# [3] 8" x 40" CLD 23 MLTPL

# Complies with US EPA Maximum Contaminant Levels (MCLs) for PFAS according to
  NSF/ANSI/CAN 61.
[1] Sizes refer to the diameter x length.
[2] NE8040-90R and NE8040-90HR are certified for a minimum daily permeate generation of
    22,712 liters.
    NE8040-90F is certified for a minimum daily permeate generation of 25,552 liters.
    NE8040-90HF is certified for a minimum daily permeate generation of 28,391 liters.
    All other trade names are certified for a minimum daily permeate generation of 8,330
    liters.
    Sizes refer to diameter x length.
[3] Certified for a minimum permeate flow of 20,000 liters per day.
[4] Elements require a 30 minute pre-service flush.
[5] Elements require a 1 hr pre-service flush.
[6] Certified for the following minimum permeate flow rates (gallons per day)
    RE 4021-BLF : 2,220
    RE 4040-BE : 2,220
    RE 8040-FLR : 9,000
    RE 8040-FLR440 : 9,900
    RE 8040-SFR : 7,500
    
    

NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
      documentation shipped with the product are Certified.


 
Toray Industries, Inc. 
1-1-2, Nihonbashi-Muromachi
Chuo-ku, Tokyo 
103-8666 
Japan 
81 3 3245 4542
Visit this company's website


Facility : F3

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Ultrafiltration Devices [G]
HFU-2020AN[1] [3] 8.5" x 85" CLD 23 MLTPL
HFUG-2020AN[2] [3] 8.5" x 85" CLD 23 MLTPL
HFUG-S1212[4] [5] 13.1 x 119.5 cm CLD 23 MLTPL

[1] Certified for a minimum daily flow of 36,000 liters.
[2] Certified for a minimum daily flow of 45,000 liters.
[3] Membranes should be flushed with tap water for 30 minutes before being placed into
    service at the following flow rates:																		
    HFU-2020AN at 25 liters per minute																		
    HFUG-2020AN at 31 liters per minute
[4] Certified for a minimum daily permeate generation of 10,000 L in public water treatment
    facilities.
[5] It requires a pre-service flush at a flow rate of 7 litters per minute (lpm) for 30
    minutes using tap water.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

NOTE: If “F3” is indicated in the first two digits of the lot number, the facility location is
      Suzhou, China.


Facility : F4

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Ultrafiltration Devices [G]
F-HFUG-2020AN[1] [2] 8.5" x 85" CLD 23 MLTPL
HFU-2020AN[1] [3] 8.5" x 85" CLD 23 MLTPL
HFU-B2315AN[1] [4] 7" x 91.8" CLD 23 MLTPL
HFUG-2020AN[1] [2] 8.5" x 85" CLD 23 MLTPL
HFUG-2020HN[1] [2] 8.5" x 85" CLD 23 MLTPL
HFUG-B2315AN[1] [5] 7" x 91.8" CLD 23 MLTPL
HFUG-L1720AN[1] [6] 8.5" x 68.27" CLD 23 MLTPL

[1] Membranes should be flushed with tap water for 30 minutes before being placed into
    service at the following flow rates:																		
    HFU-2020AN at 25 liters per minute																		
    HFUG-2020AN, HFUG-2020HN, and F-HFUG-2020AN at 31 liters per minute																	
    HFU-B2315AN at 20.8 liters per minute																		
    HFUG-2315AN at 26 liters per minute
    HFUG-L1720AN at 23.3 liters per minute
[2] Certified for a minimum daily flow of 45,000 liters.
[3] Certified for a minimum daily flow of 36,000 liters.
[4] Certified for a minimum daily flow of 30,000 liters.
[5] Certified for a minimum daily flow of 37,500 liters.
[6] Certified for a minimum daily flow of 33,500 liters.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

NOTE: If “F4” is indicated in the first two digits of the lot number, the facility location is
      Gyeongsangbuk-do, Korea.


 
Toshiba Corporation 
1 Toshiba-cho, Fuchu-shi
Tokyo 183-8511 
Japan 
81 42 333 2226


Facility : Chongqing, China

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Water Meters
Electromagnetic Flowmeter GF63(1)(2)(3)E(4)(5)(6)[1] [G] 1/2" - 10" D. HOT MLTPL
Electromagnetic Flowmeter GF63(1)(2)(3)N(4)(5)(6)[2] [G] 1/2" - 18" CLD 23 MLTPL
Electromagnetic Flowmeter GF63(1)(2)(3)T(4)(5)(6)[3] [G] 12" - 24" D. HOT MLTPL
Electromagnetic Flowmeter LF65(1)(2)(3)(4)(5)N(6)(7)(8)(9)[4] [G] 1/2" - 18" CLD 23 MLTPL
Electromagnetic Flowmeter LF65(1)(2)(3)(4)(5)P(6)(7)(8)(9)[5] [G] 1/2" - 18" D. HOT MLTPL
Electromagnetic Flowmeter LF66(0)(1)(2)(3)(4)E(5)(6)(7)[6] [G] 20" - 120" D. HOT MLTPL

[1] GF63(1)(2)(3)E(4)(5)(6):
    (1) Mounting Style
        0 - Detector / Converter integral type
        2 - Detector / Converter separate type
    (2) Meter Size
        01 - 1/2", 15mm
        02 - 1", 25mm
        03 - 1 1/4", 32mm
        04 - 1 1/2", 40mm
        05 - 2", 50mm
        06 - 2 1/2 ", 65mm
        08 - 3", 80mm
        10 - 4", 100mm
        12 - 5", 125mm
        15 - 6", 150mm
        20 - 8", 200mm
        25 - 10", 250mm
    (3) Connection flange standard
    (4) Electrode material
        B - 316L stainless steel
        C - Ti (titanium) F: Hastelloy C
    (5) Flow and calibration velocity range
    (6) Grounding ring
        1 - Without Grounding rings
        2 - With Grounding rings * Grounding rings are optional in this model. 
            When present, they will be the same material as the electrode.
[2] GF63(1)(2)(3)T(4)(5)(6):
    (1) Mounting Style 
        0: Detector / Converter integral type 
        2: Detector / Converter separate type 
    (2) Meter Size
        01: 1/2", 15mm
        02: 1", 25mm
        03: 1-1/4", 32mm
        04: 1-1/2", 40mm
        05: 2", 50mm
        06: 2-1/2", 65mm
        08: 3", 80mm
        10: 4", 100mm
        12: 5", 125mm
        15: 6", 150mm
        20: 8", 200mm
        25: 10", 250mm
        30: 12", 300mm
        35: 14", 350mm
        40: 16", 400mm
        45: 18", 450mm
    (3) Connection flange standard 
    (4) Electrode material 
        B: 316L stainless steel 
        C: Ti (titanium)
        F: Hastelloy C
    (5) Flow and calibration velocity range 
    (6) Grounding ring 
        1: Without Grounding rings 
        2: With Grounding rings 
    * Grounding rings are optional in this model. When present, they will be the same       
       material as the electrode.
[3] GF63(1)(2)(3)T(4)(5)(6):
    (1) Mounting Style
        0 - Detector / Converter integral type
        2 - Detector / Converter separate type
    (2) Meter Size
        30 - 12", 300mm
        35 - 14", 350mm
        40 - 16", 400mm
        45 - 18", 450mm
        50 - 20", 500mm
        60 - 24", 600mm
    (3) Connection flange standard
    (4) Electrode material
        B - 316L stainless steel
        C - Ti (titanium) F: Hastelloy C
    (5) Flow and calibration velocity range
    (6) Grounding ring
        1 - Without Grounding rings
        2 - With Grounding rings * Grounding rings are optional in this model. 
            When present, they will be the same material as the electrode.
[4] (1) Type 
        0: Normal type 
        4: Hazard location certification type 
    (2) Meter Size 
        D: 1/2", 15mm
        E: 1", 25mm
        S: 1-1/4", 32mm
        F: 1-1/2", 40mm
        G: 2", 50mm
        W: 2-1/2", 65mm
        H: 3", 80mm
        J: 4", 100mm
        U: 5", 125mm
        K: 6", 150mm
        L: 8", 200mm
        M: 10", 250mm
        N: 12", 300mm
        P: 14", 350mm
        Q: 16", 400mm
        R: 18", 450mm
    (3) Mounting Style 
        L: Detector/Converter integral type 
        M: Detector/Converter separate type 
    (4) Connection flange standard 
    (5) Electrode material 
        B: 316L stainless steel 
        C: Ti (titanium)
        F: Hastelloy C
    (6) Grounding ring material 
        C: 316 stainless steel 
        D: 316L stainless steel 
        E: Ti (titanium)
        H: Hastelloy C
    (7) Flow and calibration velocity range 
    (8) Excitation and signal cables 
    (9) Coating (External)
[5] LF65(1)(2)(3)(4)(5)P(6)(7)(8)(9):
    (1) Type
        0 - Normal type
        4 - Hazard location certification type
    (2) Meter Size
        D - 1/2", 15mm
        E - 1", 25mm S: 1 1/4", 32mm
        F - 1 1/2", 40mm
        G - 2", 50mm
        W - 2 1/2", 65mm
        H - 3", 80mm
        J - 4", 100mm
        U - 5", 125mm
        K - 6", 150mm
        L - 8", 200mm
        M - 10", 250mm
        N - 12", 300mm
        P - 14", 350mm
        Q - 16", 400mm
        R - 18", 450mm
    (3) Mounting Style
        L - Detector / Converter integral type
        M - Detector / Converter separate type
    (4) Connection flange standard
    (5) Electrode material
        B - 316L stainless steel
        C - Ti (titanium)
        F - Hastelloy C
    (6) Grounding ring material
        C - 316 stainless steel
        D - 316L stainless steel
        E - Ti (titanium)
        H - Hastelloy C
    (7) Flow and calibration velocity range
    (8) Excitation and signal cables
    (9) Coating (External)
[6] LF66 Models
    (0) Type
        0 - Normal type
        4 - Hazard location Certification type
    (1) Size inches (mm)
        50 - 20 (500mm)
        60 - 24 (600mm)
        70 - 28 (700mm)
        75 - 30 (750mm)
        80 - 32 (800mm)
        90 - 36 (900mm)
        A0 - 40 (1000mm)
        A1 - 42 (1050mm)
        A2 - 48 (1200mm)
        A3 - 54 (1350mm)
        A4 - 56 (1400mm)
        A5 - 60 (1500mm)
        A6 - 64 (1600mm)
        A7 - 66 (1650mm)
        A8 - 72 (1800mm)
        A9 - 78 (1950mm)
        B0 - 80 (2000mm)
        B2 - 88 (2200mm)
        B4 - 96 (2400mm)
        B6 - 104 (2600mm)
        B8 - 112 (2800mm)
        C0 - 120 (3000mm)
    (2) Mounting style
        A - Detector/Converter combined type
        B - Detector/Converter separate type
    (3) Connection flange standard, overall length
        A - AWWA class D (over 28)
        C - ANSI Class 150 ( up to 24)
        B - EN 1092-1 PN6 (DIN)
        E - EN 1092-1 PN10 (DIN)
        J - JIS 10K
    (4) Electrode Material
        K - AISI 316L
        C - Titanium
        F - Hastelloy C
    (5) Grounding Ring Material
        A - Not provided
        C - AISI 316 (Option)
        E - Titanium (Option)
        H - Hastelloy C (equivalent) (Option)
    (6) Dedicated preformed cable
         A - Not provided
    (7) Structure and Coating (External)
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



 
TOYOBO MC Corporation 
Osaka Umeda Twin Towers South
1-13-1 Umeda, Kita-ku 
Osaka 530-0001 
Japan 
81 6 6348 3360
Visit this company's website


Facility : # 1 China

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Reverse Osmosis Element[1] [2] [3]
SB410HF 4" x 40" CLD 23 MLTPL
SB415HF 4" x 40" CLD 23 MLTPL
SB810HF 8" x 40" CLD 23 MLTPL
SB815HF 8" x 40" CLD 23 MLTPL
SL415HF-2 4" x 40" CLD 23 MLTPL
SL815HF-2 8" x 40" CLD 23 MLTPL

[1] Size is expressed as Diameter x length.
[2] SB815-1 model is Certified for a minimum daily flow of 10000 gallons.
    SB415-1 model is Certified for a minimum daily flow of 2400 gallons.
    SB815HF model is Certified for a minimum daily flow of 13,000 gallons.
    SB415HF models are Certified for a minimum daily flow of 2,900 gallons.
    SB810HF model is Certified for a minimum daily flow of 12,500 gallons.
    SB410HF model is Certified for a minimum daily flow of 2,700 gallons.
    SL815HF-2 model is Certified for a minimum daily flow of 11,500 gallons.
    SL415HF-2 model is Certified for a minimum daily flow of 2,300 gallons.
    SL815 model is Certified for a minimum daily flow of 9,500 gallons.
    SL415 model is Certified for a minimum daily flow of 2,000 gallons.
[3] All models 4” in diameter require a 4 gpm flush for 24 hours using tap water.
    All models 8” in diameter require a 15 gpm flush for 24 hours using tap water.



 
Transfilm Technology Inc. 
1153 Tasman Drive
Sunnyvale, CA 94089 
United States 
888-701-7688


Facility : Shaanxi, China

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Reverse Osmosis Element [G]
IC BW-4040-82FR/34[1] [2] [3] [4] [5] 3.9" x 40" CLD 23 MLTPL
IC BW-4040-82FRLE/34[1] [2] [3] [4] [5] 3.9" x 40" CLD 23 MLTPL
IC BW-4040-82XFR/34[1] [2] [3] [4] [5] 3.9" x 40" CLD 23 MLTPL
IC BW-8040-400FR/34[1] [2] [3] [4] [5] 7.9" x 40" CLD 23 MLTPL
IC BW-8040-400FRLE/34[1] [2] [3] [4] [5] 7.9" x 40" CLD 23 MLTPL
IC BW-8040-400XFR/34[1] [2] [3] [4] [5] 7.9" x 40" CLD 23 MLTPL
IC DTNF(90)[1] [2] [3] [4] [5] 8.5" x 55.12" CLD 23 MLTPL
IC NF150-400/34[1] [2] [3] [4] [5] 7.9" x 40" CLD 23 MLTPL
IC NF150-82[1] [2] [3] [4] [5] 3.9" x 40" CLD 23 MLTPL
IC NF280-400[1] [2] [3] [4] [5] 7.9" x 40" CLD 23 MLTPL
IC NF280-82[1] [2] [3] [4] [5] 3.9" x 40" CLD 23 MLTPL
IC NF500-400[1] [2] [3] [4] [5] 7.9" x 40" CLD 23 MLTPL
IC NF500-82[1] [2] [3] [4] [5] 3.9" x 40" CLD 23 MLTPL
IC NF90-400[1] [2] [3] [4] [5] 7.9" x 40" CLD 23 MLTPL
IC NF90-82[1] [2] [3] [4] [5] 3.9" x 40" CLD 23 MLTPL
IC SF-HC1-400[1] [2] [3] [4] [5] 7.9" x 40" CLD 23 MLTPL
IC SF-HC1-82[1] [2] [3] [4] [5] 3.9" x 40" CLD 23 MLTPL
IC SF-HC2-400[1] [2] [3] [4] [5] 7.9" x 40" CLD 23 MLTPL
IC SF-HC2-82[1] [2] [3] [4] [5] 3.9" x 40" CLD 23 MLTPL
IC SF-HC3-400[1] [2] [3] [4] [5] 7.9" x 40" CLD 23 MLTPL
IC SF-HC3-82[1] [2] [3] [4] [5] 3.9" x 40" CLD 23 MLTPL
IC SF-HC4-400[1] [2] [3] [4] [5] 7.9" x 40" CLD 23 MLTPL
IC SF-HC4-82[1] [2] [3] [4] [5] 3.9" x 40" CLD 23 MLTPL
IC STNF-8035(90)[1] [2] [3] [4] [5] 7.9" x 35" CLD 23 MLTPL
IC STNF-8040(90)[1] [2] [3] [4] [5] 7.9" x 40" CLD 23 MLTPL
IC STNF-8042(90)[1] [2] [3] [4] [5] 7.9" x 42" CLD 23 MLTPL
IC SW-8040-400HRFR/34[1] [2] [3] [4] [5] 7.9" x 40" CLD 23 MLTPL
TF BW-4040-82FR/34[1] [2] [3] [4] [5] 3.9" x 40" CLD 23 MLTPL
TF BW-4040-82FRLE/34[1] [2] [3] [4] [5] 3.9" x 40" CLD 23 MLTPL
TF BW-4040-82HR[1] [2] [3] [4] [5] 3.9" x 40" CLD 23 MLTPL
TF BW-4040-82HRLE[1] [2] [3] [4] [5] 3.9" x 40" CLD 23 MLTPL
TF BW-4040-82XFR/34[1] [2] [3] [4] [5] 3.9" x 40" CLD 23 MLTPL
TF BW-4040-82XLE[1] [2] [3] [4] [5] 3.9" x 40" CLD 23 MLTPL
TF BW-8040-400FR/34[1] [2] [3] [4] [5] 7.9" x 40" CLD 23 MLTPL
TF BW-8040-400FRLE/34[1] [2] [3] [4] [5] 7.9" x 40" CLD 23 MLTPL
TF BW-8040-400HR[1] [2] [3] [4] [5] 7.9" x 40" CLD 23 MLTPL
TF BW-8040-400HRLE[1] [2] [3] [4] [5] 7.9" x 40" CLD 23 MLTPL
TF BW-8040-400XFR/34[1] [2] [3] [4] [5] 7.9" x 40" CLD 23 MLTPL
TF BW-8040-400XLE[1] [2] [3] [4] [5] 7.9" x 40" CLD 23 MLTPL
TF BW-8040-440HR[1] [2] [3] [4] [5] 7.9" x 40" CLD 23 MLTPL
TF BW-8040-440HRLE[1] [2] [3] [4] [5] 7.9" x 40" CLD 23 MLTPL
TF BW-8040-440XLE[1] [2] [3] [4] [5] 7.9" x 40" CLD 23 MLTPL
TF DTNF(90)[1] [2] [3] [4] [5] 85." x 55.12" CLD 23 MLTPL
TF DTRO(120)[1] [2] [3] [4] [5] 9.45" x 55.12" CLD 23 MLTPL
TF DTRO(75)[1] [2] [3] [4] [5] 8.5" x 55.12" CLD 23 MLTPL
TF DTRO(90)[1] [2] [3] [4] [5] 8.66" x 55.12" CLD 23 MLTPL
TF LP-4040-82[1] [2] [3] [4] [5] 3.9" x 40" CLD 23 MLTPL
TF LP-8040-400[1] [2] [3] [4] [5] 7.9" x 40" CLD 23 MLTPL
TF NF150-400/34[1] [2] [3] [4] [5] 7.9" x 40" CLD 23 MLTPL
TF NF150-82[1] [2] [3] [4] [5] 3.9" x 40" CLD 23 MLTPL
TF NF280-400[1] [2] [3] [4] [5] 7.9" x 40" CLD 23 MLTPL
TF NF280-82[1] [2] [3] [4] [5] 3.9" x 40" CLD 23 MLTPL
TF NF500-400[1] [2] [3] [4] [5] 7.9" x 40" CLD 23 MLTPL
TF NF500-82[1] [2] [3] [4] [5] 3.9" x 40" CLD 23 MLTPL
TF NF90-400[1] [2] [3] [4] [5] 7.9" x 40" CLD 23 MLTPL
TF NF90-82[1] [2] [3] [4] [5] 3.9" x 40" CLD 23 MLTPL
TF SF-HC1-400[1] [2] [3] [4] [5] 7.9" x 40" CLD 23 MLTPL
TF SF-HC1-82[1] [2] [3] [4] [5] 3.9" x 40" CLD 23 MLTPL
TF SF-HC2-400[1] [2] [3] [4] [5] 7.9" x 40" CLD 23 MLTPL
TF SF-HC2-82[1] [2] [3] [4] [5] 3.9" x 40" CLD 23 MLTPL
TF SF-HC3-400[1] [2] [3] [4] [5] 7.9" x 40" CLD 23 MLTPL
TF SF-HC3-82[1] [2] [3] [4] [5] 3.9" x 40" CLD 23 MLTPL
TF SF-HC4-400[1] [2] [3] [4] [5] 7.9" x 40" CLD 23 MLTPL
TF SF-HC4-82[1] [2] [3] [4] [5] 3.9" x 40" CLD 23 MLTPL
TF STNF-8035(90)[1] [2] [3] [4] [5] 7.9" x 35" CLD 23 MLTPL
TF STNF-8040(90)[1] [2] [3] [4] [5] 7.9" x 40" CLD 23 MLTPL
TF STNF-8042(90)[1] [2] [3] [4] [5] 7.9" x 42" CLD 23 MLTPL
TF STRO-8035(120)[1] [2] [3] [4] [5] 7.9" x 35" CLD 23 MLTPL
TF STRO-8035(75)[1] [2] [3] [4] [5] 7.9" x 35" CLD 23 MLTPL
TF STRO-8035(90)[1] [2] [3] [4] [5] 7.9" x 35" CLD 23 MLTPL
TF STRO-8040(120)[1] [2] [3] [4] [5] 7.9" x 40" CLD 23 MLTPL
TF STRO-8040(75)[1] [2] [3] [4] [5] 7.9" x 40" CLD 23 MLTPL
TF STRO-8040(90)[1] [2] [3] [4] [5] 7.9" x 40" CLD 23 MLTPL
TF STRO-8042(120)[1] [2] [3] [4] [5] 7.9" x 42" CLD 23 MLTPL
TF STRO-8042(75)[1] [2] [3] [4] [5] 7.9" x 42" CLD 23 MLTPL
TF STRO-8042(90)[1] [2] [3] [4] [5] 7.9" x 42" CLD 23 MLTPL
TF SW-2521-12HR[1] [2] [3] [4] [5] 2.4" x 21" CLD 23 MLTPL
TF SW-2521-12HRLE[1] [2] [3] [4] [5] 2.4" x 21" CLD 23 MLTPL
TF SW-2540-28HR[1] [2] [3] [4] [5] 2.4" x 40" CLD 23 MLTPL
TF SW-2540-28HRLE[1] [2] [3] [4] [5] 2.4" x 40" CLD 23 MLTPL
TF SW-4021-33HR[1] [2] [3] [4] [5] 3.9" x 21" CLD 23 MLTPL
TF SW-4021-33HRLE[1] [2] [3] [4] [5] 3.9" x 21" CLD 23 MLTPL
TF SW-4040-82HR[1] [2] [3] [4] [5] 3.9" x 40" CLD 23 MLTPL
TF SW-4040-82HRLE[1] [2] [3] [4] [5] 3.9" x 40" CLD 23 MLTPL
TF SW-4040-82XLE[1] [2] [3] [4] [5] 3.9" x 40" CLD 23 MLTPL
TF SW-8040-400HR[1] [2] [3] [4] [5] 7.9" x 40" CLD 23 MLTPL
TF SW-8040-400HRFR/34[1] [2] [3] [4] [5] 7.9" x 40" CLD 23 MLTPL
TF SW-8040-400HRLE[1] [2] [3] [4] [5] 7.9" x 40" CLD 23 MLTPL
TF SW-8040-400XHR[1] [2] [3] [4] [5] 7.9" x 40" CLD 23 MLTPL
TF SW-8040-400XLE[1] [2] [3] [4] [5] 7.9" x 40" CLD 23 MLTPL
TF SW-8040-440HRLE[1] [2] [3] [4] [5] 7.9" x 40" CLD 23 MLTPL
TF SW-8040-440XHR[1] [2] [3] [4] [5] 7.9" x 40" CLD 23 MLTPL
TF SW-8040-440XLE[1] [2] [3] [4] [5] 7.9" x 40" CLD 23 MLTPL
TF ULP-4040-82[1] [2] [3] [4] [5] 7.9" x 40" CLD 23 MLTPL
TF ULP-8040-400[1] [2] [3] [4] [5] 7.9" x 40" CLD 23 MLTPL
TF ULP-8040-440[1] [2] [3] [4] [5] 7.9" x 40" CLD 23 MLTPL
TF XLP-4040-82[1] [2] [3] [4] [5] 3.9" x 40" CLD 23 MLTPL
TF XLP-8040-400[1] [2] [3] [4] [5] 7.9" x 40" CLD 23 MLTPL
TF XLP-8040-440[1] [2] [3] [4] [5] 7.9" x 40" CLD 23 MLTPL
UC BW-4040-82FR/34[1] [2] [3] [4] [5] 3.9" x 40" CLD 23 MLTPL
UC BW-4040-82FRLE/34[1] [2] [3] [4] [5] 3.9" x 40" CLD 23 MLTPL
UC BW-4040-82XFR/34[1] [2] [3] [4] [5] 3.9" x 40" CLD 23 MLTPL
UC BW-8040-400FR/34[1] [2] [3] [4] [5] 7.9" x 40" CLD 23 MLTPL
UC BW-8040-400FRLE/34[1] [2] [3] [4] [5] 7.9" x 40" CLD 23 MLTPL
UC BW-8040-400XFR/34[1] [2] [3] [4] [5] 7.9" x 40" CLD 23 MLTPL
UC DTNF(90)[1] [2] [3] [4] [5] 8.5" x 55.12" CLD 23 MLTPL
UC NF150-400/34[1] [2] [3] [4] [5] 7.9" x 40" CLD 23 MLTPL
UC NF150-82[1] [2] [3] [4] [5] 3.9" x 40" CLD 23 MLTPL
UC NF280-400[1] [2] [3] [4] [5] 7.9" x 40" CLD 23 MLTPL
UC NF280-82[1] [2] [3] [4] [5] 3.9" x 40" CLD 23 MLTPL
UC NF500-400[1] [2] [3] [4] [5] 7.9" x 40" CLD 23 MLTPL
UC NF500-82[1] [2] [3] [4] [5] 3.9" x 40" CLD 23 MLTPL
UC NF90-400[1] [2] [3] [4] [5] 7.9" x 40" CLD 23 MLTPL
UC NF90-82[1] [2] [3] [4] [5] 3.9" x 40" CLD 23 MLTPL
UC SF-HC1-400[1] [2] [3] [4] [5] 7.9" x 40" CLD 23 MLTPL
UC SF-HC1-82[1] [2] [3] [4] [5] 3.9" x 40" CLD 23 MLTPL
UC SF-HC2-400[1] [2] [3] [4] [5] 7.9" x 40" CLD 23 MLTPL
UC SF-HC2-82[1] [2] [3] [4] [5] 3.9" x 40" CLD 23 MLTPL
UC SF-HC3-400[1] [2] [3] [4] [5] 7.9" x 40" CLD 23 MLTPL
UC SF-HC3-82[1] [2] [3] [4] [5] 3.9" x 40" CLD 23 MLTPL
UC SF-HC4-400[1] [2] [3] [4] [5] 7.9" x 40" CLD 23 MLTPL
UC SF-HC4-82[1] [2] [3] [4] [5] 3.9" x 40" CLD 23 MLTPL
UC STNF-8035(90)[1] [2] [3] [4] [5] 7.9" x 35" CLD 23 MLTPL
UC STNF-8040(90)[1] [2] [3] [4] [5] 7.9" x 40" CLD 23 MLTPL
UC STNF-8042(90)[1] [2] [3] [4] [5] 7.9" x 42" CLD 23 MLTPL
UC SW-8040-400HRFR/34[1] [2] [3] [4] [5] 7.9" x 40" CLD 23 MLTPL

[1] Naming convention:
    UC (UltraClean)/TF (Transfilm)/IC (IonClear): branding
    HR: high rejection
    XHR: ultra-high rejection
    XLE: extra-low energy consumption
    HRLE: high rejection and low energy consumption
    FR: fouling resistance
    XFR: ultra-fouling resistance
    FRLE: fouling resistance and low energy consumption
[2] Certified for the following minimum daily (24 hour) permeate generation volumes for use
    in public water treatment facilities:
    UC SW-2521-12HR, TF SW-2521-12HR, IC SW-2521-12HR:  240 gallons
    UC SW-2521-12HRLE, TF SW-2521-12HRLE, IC SW-2521-12HRLE: 290 gallons
    UC DTRO(90), UC DTRO(120), TF DTRO(90), TF DTRO(120), IC DTRO(90), IC DTRO(120): 400
    gallons
    UC DTRO(75), TF DTRO(75), IC DTRO(75): 420 gallons
    UC DTNF(90), TF DTNF(90), IC DTNF(90): 450 gallons
    UC SW-2540-28HR, TF SW-2540-28HR, IC SW-2540-28HR: 580 gallons
    UC SW-4021-33HR, TF SW-4021-33HR, IC SW-4021-33HR: 660 gallons
    UC SW-2540-28HRLE, TF SW-2540-28HRLE, IC SW-2540-28HRLE: 680 gallons
    UC SW-4021-33HRLE, TF SW-4021-33HRLE, IC SW-4021-33HRLE: 790 gallons
    UC SW-4040-82HR, TF SW-4040-82HR, IC SW-4040-82HR: 1,320 gallons
    UC NF90-82, TF NF90-82, IC NF90-82: 1,580 gallons
    UC SW-4040-82HRLE, TF SW-4040-82HRLE, IC SW-4040-82HRLE: 1,600 gallons
    UC SW-4040-82XLE, TF SW-4040-82XLE, IC SW-4040-82XLE: 1,660 gallons
    UC SF-HC4-82, TF SF-HC4-82, IC SF-HC4-82: 1,720 gallons
    UC NF150-82, UC SF-HC3-82, TF NF150-82, TF SF-HC3-82, IC NF150-82, IC SF-HC3-82: 1,850
    gallons
    UC BW-4040-82FRLE/34, UC SF-HC2-82, TF BW-4040-82FRLE/34, TF SF-HC2-82, IC
    BW-4040-82FRLE/34, IC SF-HC2-82: 1,900 gallons
    UC BW-4040-82FR/34, TF BW-4040-82FR/34, IC BW-4040-82FR/34: 2,000 gallons
    UC BW-4040-82XFR/34, TF BW-4040-82XFR/34, IC BW-4040-82XFR/34: 2,050 gallons
    UC XLP-4040-82, TF XLP-4040-82, IC XLP-4040-82: 2,220 gallons
    UC ULP-4040-82, UC BW-4040-82HR, UC BW-4040-82HRLE, UC NF280-82, TF ULP-4040-82, TF
    BW-4040-82HR, TF BW-4040-82HRLE, TF NF280-82, IC ULP-4040-82, IC BW-4040-82HR, IC
    BW-4040-82HRLE, IC NF280-82: 2,250 gallons
    UC BW-4040-82XLE, TF BW-4040-82XLE, IC BW-4040-82XLE: 2,400 gallons
    UC LP-4040-82, TF LP-4040-82, IC LP-4040-82: 2,500 gallons
    UC SF-HC1-82, TF SF-HC1-82, IC SF-HC1-82: 2,550 gallons
    UC NF500-82, TF NF500-82, IC NF500-82: 2,900 gallons
    UC STRO-8035(120), TF STRO-8035(120), IC STRO-8035(120): 5,000 gallons
    UC STRO-8042(120), TF STRO-8042(120), IC STRO-8042(120): 5,280 gallons
[3] Certified for the following minimum daily (24 hour) permeate generation volumes for use
    in public water treatment facilities:
    UC STRO-8035(90), UC STRO-8040(120), TF STRO-8035(90), TF STRO-8040(120), IC
    STRO-8035(90), IC STRO-8040(120): 5,800 gallons
    UC STRO-8042(90), UC STNF-8035(90), TF STRO-8042(90), TF STNF-8035(90), IC
    STRO-8042(90), IC STNF-8035(90): 6,070 gallons
    UC SW-8040-400XHR, TF SW-8040-400XHR, IC SW-8040-400XHR: 6,100 gallons
    UC SW-8040-400HR, UC SW-8040-400HRFR/34, TF SW-8040-400HR, TF SW-8040-400HRFR/34, IC
    SW-8040-400HR, IC SW-8040-400HRFR/34: 6,500 gallons
    UC SW-8040-440XHR, UC STRO-8040(90), UC STNF-8042(90), TF SW-8040-440XHR, TF
    STRO-8040(90), TF STNF-8042(90), IC SW-8040-440XHR, IC STRO-8040(90), IC STNF-8042(90):
    6,600 gallons
    UC STNF-8040(90), TF STNF-8040(90), IC STNF-8040(90): 6,860 gallons
    UC STRO-8035(75), TF STRO-8035(75), IC STRO-8035(75): 7,390 gallons
    UC SW-8040-400HRLE, TF SW-8040-400HRLE, IC SW-8040-400HRLE: 7,400 gallons
    UC STRO-8042(75), TF STRO-8042(75), IC STRO-8042(75): 7,500 gallons
    UC SW-8040-440HRLE, UC STRO-8040(75), TF SW-8040-440HRLE, TF STRO-8040(75), IC
    SW-8040-440HRLE, IC STRO-8040(75): 7,900 gallons
    UC SF-HC4-400, TF SF-HC4-400, IC SF-HC4-400: 7,980 gallons
    UC NF90-400, TF NF90-400, IC NF90-400: 8,200 gallons
    UC SW-8040-400XLE, UC SF-HC3-400, TF SW-8040-400XLE, TF SF-HC3-400, IC SW-8040-400XLE,
    IC SF-HC3-400: 8,450 gallons
    UC NF150-400/34, TF NF150-400/34, IC NF150-400/34: 8,950 gallons
    UC SF-HC2-400, TF SF-HC2-400, IC SF-HC2-400: 9,300 gallons
    UC SW-8040-440XLE, TF SW-8040-440XLE, IC SW-8040-440XLE: 9,380 gallons
    UC BW-8040-400FRLE/34, TF BW-8040-400FRLE/34, IC BW-8040-400FRLE/34: 10,500 gallons
    UC NF280-400, TF NF280-400, IC NF280-400: 10,550 gallons
    UC LP-8040-400, TF LP-8040-400, IC LP-8040-400: 11,000 gallons
    UC BW-8040-400FR/34, TF BW-8040-400FR/34, IC BW-8040-400FR/34: 11,100 gallons
    UC ULP-8040-400, UC BW-8040-400HR, UC BW-8040-400XFR/34, UC BW-8040-400HRLE, TF
    ULP-8040-400, TF BW-8040-400HR, TF BW-8040-400XFR/34, TF BW-8040-400HRLE, IC
    ULP-8040-400, IC BW-8040-400HR, IC BW-8040-400XFR/34, IC BW-8040-400HRLE: 11,350 gallons
    UC XLP-8040-400, TF XLP-8040-400, IC XLP-8040-400: 11,900 gallons
    UC BW-8040-400XLE, TF BW-8040-400XLE, and IC BW-8040-400XLE: 12,550 gallons
    UC BW-8040-440HR, UC BW-8040-440HRLE, TF BW-8040-440HR, TF BW-8040-440HRLE, IC
    BW-8040-440HR, IC BW-8040-440HRLE: 12,560 gallons
    UC ULP-8040-440, UC SF-HC1-400, TF ULP-8040-440, TF SF-HC1-400, IC ULP-8040-440, IC
    SF-HC1-400: 12,650 gallons
    UC NF500-400, TF NF500-400, IC NF500-400: 12,680 gallons
    UC XLP-8040-440, TF XLP-8040-440, IC XLP-8040-440: 13,200 gallons
    UC BW-8040-440XLE, TF BW-8040-440XLE, IC BW-8040-440XLE: 14,000 gallons
[4] A pre-service flush is required at the following flow rates (gallons per minute) for 2
    hours using deionized water:
    UC BW-4040-82FR/34, TF BW-4040-82FR/34, IC BW-4040-82FR/34: 1.39 gpm
    UC BW-4040-82FRLE/34, TF BW-4040-82FRLE/34, IC BW-4040-82FRLE/34: 1.32 gpm
    UC BW-4040-82HR, TF BW-4040-82HR, IC BW-4040-82HR: 1.56 gpm
    UC BW-4040-82HRLE, TF BW-4040-82HRLE, IC BW-4040-82HRLE: 1.56 gpm
    UC BW-4040-82XFR/34, TF BW-4040-82XFR/34, IC BW-4040-82XFR/34: 1.42 gpm
    UC BW-4040-82XLE, TF BW-4040-82XLE, IC BW-4040-82XLE: 1.67 gpm
    UC BW-8040-400FR/34, TF BW-8040-400FR/34, IC BW-8040-400FR/34: 7.64 gpm
    UC BW-8040-400FRLE/34, TF BW-8040-400FRLE/34, IC BW-8040-400FRLE/34: 7.29 gpm
    UC BW-8040-400HR, TF BW-8040-400HR, IC BW-8040-400HR: 7.88 gpm
    UC BW-8040-400HRLE, TF BW-8040-400HRLE, IC BW-8040-400HRLE: 7.88 gpm
    UC BW-8040-400XFR/34, TF BW-8040-400XFR/34, IC BW-8040-400XFR/34: 7.89 gpm
    UC BW-8040-400XLE, TF BW-8040-400XLE, IC BW-8040-400XLE: 8.72 gpm
    UC BW-8040-440HR, TF BW-8040-440HR, IC BW-8040-440HR: 8.72 gpm
    UC BW-8040-440HRLE, TF BW-8040-440HRLE, IC BW-8040-440HRLE: 8.72 gpm
    UC BW-8040-440XLE, TF BW-8040-440XLE, IC BW-8040-440XLE: 9.72 gpm
    UC DTNF(90), TF DTNF(90), IC DTNF(90): 1.98 gpm
    UC DTRO(120), TF DTRO(120), IC DTRO(120): 1.76 gpm
    UC DTRO(75), TF DTRO(75), IC DTRO(75): 1.85 gpm
    UC DTRO(90), TF DTRO(90), IC DTRO(90): 1.76 gpm
    UC LP-4040-82, TF LP-4040-82, IC LP-4040-82: 1.74 gpm
    UC LP-8040-400, TF LP-8040-400, IC LP-8040-400: 7.71 gpm
    UC NF150-400/34, TF NF150-400/34, IC NF150-400/34: 6.22 gpm
    UC NF150-82, TF NF150-82, IC NF150-82: 1.28 gpm
    UC NF280-400, TF NF280-400, IC NF280-400: 7.33 gpm
    UC NF280-82, TF NF280-82, IC NF280-82: 1.56 gpm
    UC NF500-400, TF NF500-400, IC NF500-400: 8.81 gpm
    UC NF500-82, TF NF500-82, IC NF500-82: 2.01 gpm
    UC NF90-400, TF NF90-400, IC NF90-400: 5.69 gpm
    UC NF90-82, TF NF90-82, IC NF90-82: 1.1 gpm
    UC SF-HC1-400, TF SF-HC1-400, IC SF-HC1-400: 8.78 gpm
    UC SF-HC1-82, TF SF-HC1-82, IC SF-HC1-82: 1.77 gpm
    UC SF-HC2-400, TF SF-HC2-400, IC SF-HC2-400: 6.46 gpm
[5] A pre-service flush is required at the following flow rates (gallons per minute) for 2
    hours using deionized water:
    UC SF-HC2-82, TF SF-HC2-82, IC SF-HC2-82: 1.32 gpm
    UC SF-HC3-400, TF SF-HC3-400, IC SF-HC3-400: 5.87 gpm
    UC SF-HC3-82, TF SF-HC3-82, IC SF-HC3-82: 1.28 gpm
    UC SF-HC4-400, TF SF-HC4-400, IC SF-HC4-400: 5.54 gpm
    UC SF-HC4-82, TF SF-HC4-82, IC SF-HC4-82: 1.19 gpm
    UC STNF-8035(90), TF STNF-8035(90), IC STNF-8035(90): 4.22 gpm
    UC STNF-8040(90), TF STNF-8040(90), IC STNF-8040(90): 4.76 gpm
    UC STNF-8042(90), TF STNF-8042(90), IC STNF-8042(90): 4.58 gpm
    UC STRO-8035(120), TF STRO-8035(120), IC STRO-8035(120): 3.47 gpm
    UC STRO-8035(75), TF STRO-8035(75), IC STRO-8035(75): 5.13 gpm
    UC STRO-8035(90), TF STRO-8035(90), IC STRO-8035(90): 4.03 gpm
    UC STRO-8040(120), TF STRO-8040(120), IC STRO-8040(120): gpm
    UC STRO-8040(75), TF STRO-8040(75), IC STRO-8040(75): 5.49 gpm
    UC STRO-8040(90), TF STRO-8040(90), IC STRO-8040(90): 4.58 gpm
    UC STRO-8042(120), TF STRO-8042(120), IC STRO-8042(120): 3.67 gpm
    UC STRO-8042(75), TF STRO-8042(75), IC STRO-8042(75): 5.21 gpm
    UC STRO-8042(90), TF STRO-8042(90), IC STRO-8042(90): 4.22 gpm
    UC SW-2521-12HR, TF SW-2521-12HR, IC SW-2521-12HR: 0.17 gpm
    UC SW-2521-12HRLE, TF SW-2521-12HRLE, IC SW-2521-12HRLE: 0.2 gpm
    UC SW-2540-28HR, TF SW-2540-28HR, IC SW-2540-28HR: 0.4 gpm
    UC SW-2540-28HRLE, TF SW-2540-28HRLE, IC SW-2540-28HRLE: 0.47 gpm
    UC SW-4021-33HR, TF SW-4021-33HR, IC SW-4021-33HR: 0.46 gpm
    UC SW-4021-33HRLE, TF SW-4021-33HRLE, IC SW-4021-33HRLE: 0.55 gpm
    UC SW-4040-82HR, TF SW-4040-82HR, IC SW-4040-82HR: 0.92 gpm
    UC SW-4040-82HRLE, TF SW-4040-82HRLE, IC SW-4040-82HRLE: 1.11 gpm
    UC SW-4040-82XLE, TF SW-4040-82XLE, IC SW-4040-82XLE: 1.15 gpm
    UC SW-8040-400HR, TF SW-8040-400HR, IC SW-8040-400HR: 4.51 gpm
    UC SW-8040-400HRFR/34, TF SW-8040-400HRFR/34, IC SW-8040-400HRFR/34: 4.51 gpm
    UC SW-8040-400HRLE, TF SW-8040-400HRLE, IC SW-8040-400HRLE: 5.14 gpm
    UC SW-8040-400XHR, TF SW-8040-400XHR, IC SW-8040-400XHR: 4.24 gpm
    UC SW-8040-400XLE, TF SW-8040-400XLE, IC SW-8040-400XLE: 5.87 gpm
    UC SW-8040-440HRLE, TF SW-8040-440HRLE, IC SW-8040-440HRLE: 5.49 gpm
    UC SW-8040-440XHR, TF SW-8040-440XHR, IC SW-8040-440XHR: 4.58 gpm
    UC SW-8040-440XLE, TF SW-8040-440XLE, IC SW-8040-440XLE: 6.51 gpm
    UC ULP-4040-82, TF ULP-4040-82, IC ULP-4040-82: 1.56 gpm
    UC ULP-8040-400, TF ULP-8040-400, IC ULP-8040-400: 7.88 gpm
    UC ULP-8040-440, TF ULP-8040-440, IC ULP-8040-440: 8.78 gpm
    UC XLP-4040-82, TF XLP-4040-82, IC XLP-4040-82: 1.54 gpm
    UC XLP-8040-400, TF XLP-8040-400, IC XLP-8040-400: 8.26 gpm
    UC XLP-8040-440, TF XLP-8040-440, IC XLP-8040-440: 9.17 gpm
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



 
Tribal Manufacturing, Inc. 
450 Leggitt Road
Marshall, MI 49068 
United States 
269-781-3901
Visit this company's website


Facility : Marshall, MI

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Backflow Preventers
G-784 Backflow Preventer 1/2" x 1/2" CLD 23 MLTPL
G-784-10A Backflow Preventer 1/2" x 1/2" CLD 23 MLTPL
G-784-13A Backflow Preventer 3/4" x 1/2" CLD 23 MLTPL
G-784-8A Water Fill Assembly 1/2" x 1/2" CLD 23 MLTPL
G-784-9A Backflow Preventer 1/2" x 1/2" CLD 23 MLTPL

[1] Certified as a component of a manifold for a maximum of 22 adapters per liter for cold
    applications and a maximum of 16 adapters per liter for hot applications.


 
Trojan Technologies 
3020 Gore Road
London, ON N5V 4T7 
Canada 
519-457-3400


Facility : London, Ontario, Canada

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Ultra-Violet Reactors[1]
AQUAFINE™ LOGIC 4" - 10" CLD 23 MLTPL
SWIFTBEVERAGE™ 4" - 20" CLD 23 MLTPL
TROJANUVFLEX™ 12" - 48" CLD 23 MLTPL
TROJANUVSWIFT™ 12" - 30" CLD 23 MLTPL
TROJANUVSWIFT™ ECT 24" - 30" CLD 23 MLTPL
TROJANUVSWIFT™ SC 4" - 20" CLD 23 MLTPL
TrojanUVFit™ 4" - 12" CLD 23 MLTPL

[1] TROJANUVTORRENT™: Certified for a minimum flow of 2 million gallons per day (7,570,824
    L/day).
    TROJANUVFLEX™ 100: Certified for a minimum flow rate of 0.14 million gallons per day. 
    TROJANUVFLEX™ 200: Certified for a minimum flow rate of 0.44 million gallons per day.
    TROJANUVSWIFT™ 2L12: Certified for a minimum flow of 0.2 million gallons per day. 
    TROJANUVSWIFT™ 2L24, 4L24, 6L24, 8L24 and ECT 8L24: Certified for a minimum flow rate of
    1 million gallons per day.
    TROJANUVSWIFT™ 4L30, 6L30, 8L30, 10L30, 16L30, ECT 8L30, and ECT 16L30: Certified for a
    minimum flow of 3 million gallons per day.
    TROJANUVPHOX™,  TROJANUVSWIFT™ SC, SWIFTBEVERAGE™, and AQUAFINE™ LOGIC :  Certified for
    a minimum flow of 27,200 L/day.
    OPTIVENN™: Certified for a minimum flow of 115 per gallons per day (435 L/day).
    AVANT™: Certified for a minimum flow of 1152 gallons per day (4360 L/day).
    TrojanUVFit™: Certified for a minimum flow rate of 3,800 liters per day.

NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
      documentation shipped with the product are Certified.


 
Trojan Technologies 
839 State Route 13
Cortland, NY 13045 
United States 
516-484-5400


Facility : 1A

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Ultrafiltration Devices[1]
FX0620050080A00-CN 160 mm x 2200 mm CLD 23 MLTPL
FX0620050080B00-CN 160 mm x 2200 mm CLD 23 MLTPL
FX0620050080C00-CN 160 mm x 2200 mm CLD 23 MLTPL
FX0620050100A00-CN 160 mm x 2200 mm CLD 23 MLTPL
FX0620050100B00-CN 160 mm x 2200 mm CLD 23 MLTPL
FX0620050100C00-CN 160 mm x 2200 mm CLD 23 MLTPL

[1] Certified to a minimum daily flow rate of 5760 liters per day.



Facility : 2B

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Ultrafiltration Devices[1]
FX0620050080A00-CN 160 mm x 2200 mm CLD 23 MLTPL
FX0620050080B00-CN 160 mm x 2200 mm CLD 23 MLTPL
FX0620050080C00-CN 160 mm x 2200 mm CLD 23 MLTPL
FX0620050100A00-CN 160 mm x 2200 mm CLD 23 MLTPL
FX0620050100B00-CN 160 mm x 2200 mm CLD 23 MLTPL
FX0620050100C00-CN 160 mm x 2200 mm CLD 23 MLTPL

[1] Certified to a minimum daily flow rate of 5760 liters per day



Facility : 3C

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Ultrafiltration Devices[1]
FX0620050080A00-SN 160 mm x 2200 mm CLD 23 MLTPL
FX0620050080B00-SN 160 mm x 2200 mm CLD 23 MLTPL
FX0620050080C00-SN 160 mm x 2200 mm CLD 23 MLTPL
FX0620050100A00-SN 160 mm x 2200 mm CLD 23 MLTPL
FX0620050100B00-SN 160 mm x 2200 mm CLD 23 MLTPL
FX0620050100C00-SN 160 mm x 2200 mm CLD 23 MLTPL

[1] Certified to a minimum daily flow rate of 5760 liters per day



 
Trojan Technologies 
839 State Route 13
Cortland, NY 13045 
United States 
516-484-5400


Facility : # 1 China

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Ultrafiltration Devices[1] [2] [3] [G]
UNA620A-DCA 21.6 cm x 230 cm CLD 23 MLTPL

[1] UNA620A-DCA is certified for a minimum daily flow of 47,520 liters per day.
[2] The UNA620A-DCA is flushed for 2 hours at a flow rate of 33.3 liters per minute with
    UF/MF filtered de-ionized water.
[3] Complies with US EPA Maximum Contaminant Levels (MCLs) for PFAS according to
    NSF/ANSI/CAN 61.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



 
Trojan Technologies Corporation 
839 State Route 13
Cortland, NY 13045 
United States 
866-475-0115


Facility : Cortland, NY

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Ultrafiltration Devices
Ultra60 UF Module MSA-620A[6] [7] 7" x 92" CLD 23 MLTPL

[6] Certified for a minimum daily flow of 11,520 liters.
[7] Product requires a 7 gpm flush with tap water for 15 minutes before use.

Microfiltration Devices
UNA-620C[4] [5] 6 1/2" x 85" CLD 23 MLTPL
UNA-620A[1] [2] [3] 6 1/2" x 85" CLD 23 MLTPL

[1] Certified for a minimum daily flow of 27,254 Liters per day.
[2] Flush for 15 minutes at a flow rate of 5 gallons per minute with water treatment plant
    feed water or tap water.
[3] Complies with US EPA Maximum Contaminant Levels (MCLs) for PFAS according to
    NSF/ANSI/CAN 61.
[4] Certified for a minimum daily flow of 12,168 gallons per day.
[5] Flush for 15 minutes at a flow rate of 5 gallons per minute with water treatment plant
    feed water or tap water.



Facility : Cortland, NY

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Ultrafiltration Devices
UNA-620A[3] [4] [5] 6.5" x 85" CLD 23 MLTPL
UNA-620C[3] [6] 6.5" x 85" CLD 23 MLTPL
Ultra60 UF MSA-620A[1] [2] 7" x 92" CLD 23 MLTPL

[1] Certified for a minimum daily flow of 11,520 liters.
[2] Product requires a 7 gpm (gallons per minute) flush with tap water for 15 minutes before
    use.
[3] Product is flushed for 15 minutes at a flow rate of 5 gpm (gallons per minute) with
    water treatment plant feed water or tap water.
[4] Certified for a minimum daily flow of 27,254 liters.
[5] Complies with US EPA Maximum Contaminant Levels (MCLs) for PFAS according to
    NSF/ANSI/CAN 61.
[6] Certified for a minimum daily flow of 12,168 gallons per day.



 
Tyco Fire and Building Products 
1467 Elmwood Avenue
Cranston, RI 02910 
United States 
401-781-8220
Visit this company's website


Facility : Shandong, China

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Valves[G]
RSV-1 Residential 1" Domestic Shut-Off Valve 1" CLD 23 MLTPL
RSV-1 Residential 2" Domestic Shut-Off Valve 2" CLD 23 MLTPL

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



 
UKL INSTRUMENTS PVT LTD 
232, 7th Street, Ashtalakshmi Nagar
Alapakkam 
Chennai, TA 600116 
India 
91 9940022813


Facility : Tamil Nadu, India

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Filtration Devices / Components[1] [G]
40-21-300-EP 4" x 21" D. HOT MLTPL
40-XXX-YYYY-ZZ 4" D. HOT MLTPL
80-XXX-YYYY-ZZ 8" D. HOT MLTPL

[1] 40-XXX-YYYY-ZZ and 80-XXX-YYYY-ZZ are certified for a minimum daily flowing volume of
    20,000 L in public water treatment facilities.
    
    All models require a pre-service flush at a flow rate of 4.4 gallons per minute (gpm)
    for 5 minutes using tap water.
    
    40-XXX-YYYY-ZZ; where:
    
    40
    40 - 4 inch diameter
    
    XXX:  Length
          *21 - 21 inches
          40  - 40 inches
          80  - 80 inches
          120 - 120 inches
          160 - 160 inches
          200 - 200 inches
          240 - 240 inches
    
    YYYY: Pressure rating
          300  - 300 psi
          450  - 450 psi
          600  - 600 psi
          1000 - 1000 psi
          1200 - 1200 psi
    
    ZZ:   Port configuration
          EP - End port
          SP - Side port
    
    *only available in configuration 40-21-300-EP.
    
    80-XXX-YYYY-ZZ; where:
    
    80
    80 - 8 inch diameter
    
    XXX:  Length
          40 - 40 inches
          80 - 80 inches
          120 - 120 inches
          160 - 160 inches
          200 - 200 inches
          240 - 240 inches
          280 - 280 inches
    
    YYYY: Pressure rating
          300  - 300 psi
          450  - 450 psi
          600  - 600 psi
          1000 - 1000 psi
          1200 - 1200 psi
    
    ZZ:   Port configuration
          EP - End port
          SP - Side port
    
    
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



 
Ultramar Water Srl 
Corso Giacomo Matteotti 67
Fano (PU), 61032 
Italy 
39 393 9155607
Visit this company's website


Facility : # 1

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Nanofiltration Devices[1] [2]
Ultramar Water NF-4040 8" x 40" CLD 23 MLTPL
Ultramar Water NF-4040-HF 8" x 40" CLD 23 MLTPL
Ultramar Water NF-4040-HR 8" x 40" CLD 23 MLTPL
Ultramar Water NF-8040-400 8" x 40" CLD 23 MLTPL
Ultramar Water NF-8040-400(34) 8" x 40" CLD 23 MLTPL
Ultramar Water NF-8040-400-HF 8" x 40" CLD 23 MLTPL
Ultramar Water NF-8040-400-HF(34) 8" x 40" CLD 23 MLTPL
Ultramar Water NF-8040-400-HR 8" x 40" CLD 23 MLTPL
Ultramar Water NF-8040-400HR(34) 8" x 40" CLD 23 MLTPL

[1] [1]Ultramar Water BW-4040 model is certified for a minimum daily flow of 9,100 liters
    per day.				
    Ultramar Water ULP-4040 model is certified for a minimum daily flow of 9,500 liters per
    day.				
    Ultramar Water ULP-8040-400, Ultramar Water BW-8040-400, and Ultramar Water BW-8040-400
    (34) model is certified for a minimum daily flow of 42,000 liters per day.				
    Ultramar Water BW-8040-440 model is certified for a minimum daily flow of 44,940 liters
    per day.
[2] Ultramar Water BW-4040 and Ultramar Water ULP-4040 should be flushed at 1.7 gallons per
    minute for 1 hour with tap water.				
    Ultramar Water BW-8040-440, Ultramar Water BW-8040-440, and Ultramar Water BW-8040-400
    (34) should be flushed at 7.7 gallons per minute for 1 hour with tap water.				
    Ultramar Water BW-8040-440 should be flushed at 8.24 gallons per minute for 1 hour with
    tap water.

Reverse Osmosis Element[1] [2]
Ultramar Water SW-8040-HF 8" x 40" CLD 23 MLTPL

[1] [1]Ultramar Water BW-4040 model is certified for a minimum daily flow of 9,100 liters
    per day.				
    Ultramar Water ULP-4040 model is certified for a minimum daily flow of 9,500 liters per
    day.				
    Ultramar Water ULP-8040-400, Ultramar Water BW-8040-400, and Ultramar Water BW-8040-400
    (34) model is certified for a minimum daily flow of 42,000 liters per day.				
    Ultramar Water BW-8040-440 model is certified for a minimum daily flow of 44,940 liters
    per day.
[2] Ultramar Water BW-4040 and Ultramar Water ULP-4040 should be flushed at 1.7 gallons per
    minute for 1 hour with tap water.				
    Ultramar Water BW-8040-440, Ultramar Water BW-8040-440, and Ultramar Water BW-8040-400
    (34) should be flushed at 7.7 gallons per minute for 1 hour with tap water.				
    Ultramar Water BW-8040-440 should be flushed at 8.24 gallons per minute for 1 hour with
    tap water.



 
United Commerce LLC 
2222 W Grand River Ave
Suite A 
Okemos, MI 48864 
United States 
313-350-9271


Facility : Guangdong, China

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Fittings [G]
Evercraft Waterworks PF6 1/2" - 2" C. HOT BRASS
Evercraft Waterworks PF6m[1] 1/2" - 2" C. HOT BRASS

[1] Evercraft Waterworks PF6m uses alloy C69300.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

Valves [G]
Evercraft Waterworks Low Lead PEX Ball Valve 1/2" - 1 1/4" C. HOT MLTPL
Evercraft Waterworks PEX Ball Valve (PF5-Q) 1/2" - 1 1/4" C. HOT MLTPL
Evercraft Waterworks PEX Ball Valve (PF5m-Q)[2] 1/2" - 1 1/4" C. HOT MLTPL

[2] For trade names, the use of "m" in trade name indicates use of C69300 alloy.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



 
United Flo 
1229 Capitol Drive
Addison, IL 60101 
United States 
888-322-9565 
888-322-9565


Facility : Addison, IL

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Pumps[1]
United Flo Split Case Pump (UC01-XX.YY.ZZ.SS) 2" - 42" CLD 23 MLTPL

[1] Model Naming Convention:
    UC01-XX.YY.ZZ.SS
    UC01 - Split Case Pump Series
    XX - Discharge Size (inches)
    YY - Suction Size (inches)
    ZZ - Impeller Maximum Trim (inches)
    SS - Spheres (solids) passage size (inches)
    Certified for use in municipal distribution systems only.
    Certified for a minimum daily flow of 140 gallons.



 
United Water Products, a PUPCO Brand 
8710 Air Park W Dr #100
Charlotte, NC 28214 
United States 
704 375 0776


Facility : Tianjin, China

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Valves[G]
3975FF 8" - 48" CLD 23 MLTPL

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



 
United Water Products, a PUPCO Brand 
8710 Air Park W Dr #100
Charlotte, NC 28214 
United States 
704 375 0776


Facility : Qingdao, China

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Fire Hydrants
Dry-Barrel Fire Hydrant/F06 100-150 mm D. HOT MLTPL



 
Useong Electro Mechanics Co. Ltd. 
Memphis Tower 12F
516, Heungan-daero, Dongan-gu 
Anyang-si, Gyeonggi-do 431-810 
Republic of Korea 
82 31 421 8131
Visit this company's website


Facility : Shandong, China

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Switches/Sensors[G]
FS-11A-# 5/16" x 5/16" CLD 23 MLTPL
FS-11S-# 67 mm x 34 mm CLD 23 MLTPL

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



 
VAG Armaturen GmbH 
Carl-Reuther-Strasse 1
68305 Mannheim 
Germany 
49 621 749 1925


Facility : Jiangsu Province, China

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Valves
VAG EKN Butterfly Valve AWWA 6" - 120" CLD 23 MLTPL



 
VAG Water Systems (Taicang) Co., Ltd. 
No. 15 East Guangzhou Road
Taicang, Jiangsu Province 215400 
China 
86 512 5357 5357
Visit this company's website


Facility : Jiangsu Province, China

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Valves[G]
VAG EKN Butterfly Valve AWWA 6" - 168" CLD 23 MLTPL

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



 
Vahn-Tech International Inc. 
2608-88, Blue Jays Way
Toronto, ON M5V 0L7 
Canada 
416-342-0001
Visit this company's website


Facility : Shandong, China

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Valves[G]
Dual Flap Check Valve Class 125 2" - 24" CLD 23 MLTPL
Dual Flap Check Valve Class 125 – N 2" - 24" CLD 23 MLTPL
Dual Flap Check Valve Class 125 – SE 2" - 12" CLD 23 MLTPL
Resilient Seat BFV 10D - Wafer 2" - 12" CLD 23 MLTPL
Resilient Seat BFV 10D - Wafer 2" - 12" CLD 23 MLTPL
Resilient Seat BFV 11D – Lug 2" - 12" CLD 23 MLTPL
Resilient Seat BFV 11D – Lug 2" - 12" CLD 23 MLTPL
Resilient Seat Gate Valve NRS - FG 2" - 12" CLD 23 MLTPL
Resilient Seat Gate Valve NRS - FG300 2.5" - 12" CLD 23 MLTPL
Resilient Seat Gate Valve OS&Y - FG 2" - 12" CLD 23 MLTPL
Resilient Seat Gate Valve OS&Y - FG300 2.5" - 12" CLD 23 MLTPL
Tamper Switch Butterfly Valve 2" - 12" CLD 23 MLTPL
Tamper Switch Butterfly Valve - Grove 2" - 12" CLD 23 MLTPL

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



 
Valve Teck 
4575 Damascus Road
Memphis, TN 38118 
United States 
901 794 5790


Facility : Factory 1

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Valves[G]
Pro Valve® Lugged Style Resilient Seated Butterfly Valve / ANSI 125# 2" - 12" CLD 23 MLTPL
PVLF02L203335X 2" CLD 23 MLTPL
PVLF25L203335X 2 1/2" CLD 23 MLTPL
PVLF03L203335X 3" CLD 23 MLTPL
PVLF04L203335X 4" CLD 23 MLTPL
PVLF05L203335X 5" CLD 23 MLTPL
PVLF06L203335X 6" CLD 23 MLTPL
PVLF08L203335X 8" CLD 23 MLTPL
PVLF10L203335X 10" CLD 23 MLTPL
PVLF12L203335X 12" CLD 23 MLTPL
Pro Valve® Wafer Style Resilient Seated Butterfly Valve / ANSI 125# 2" - 12" CLD 23 MLTPL
PVLF02W203335X 2" CLD 23 MLTPL
PVLF25W203335X 2 1/2" CLD 23 MLTPL
PVLF03W203335X 3" CLD 23 MLTPL
PVLF04W203335X 4" CLD 23 MLTPL
PVLF05W203335X 5" CLD 23 MLTPL
PVLF06W203335X 6" CLD 23 MLTPL
PVLF08W203335X 8" CLD 23 MLTPL
PVLF10W203335X 10" CLD 23 MLTPL
PVLF12W203335X 12" CLD 23 MLTPL
Pro Valve® Wafer Style Check Valve / ANSI 125# 2" - 12" CLD 23 MLTPL
PVCLLF02125CTESF 2" CLD 23 MLTPL
PVCLLF25125CTESF 2 1/2" CLD 23 MLTPL
PVCLLF03125CTESF 3" CLD 23 MLTPL
PVCLLF04125CTESF 4" CLD 23 MLTPL
PVCLLF05125CTESF 5" CLD 23 MLTPL
PVCLLF06125CTESF 6" CLD 23 MLTPL
PVCLLF08125CTESF 8" CLD 23 MLTPL
PVCLLF10125CTESF 10" CLD 23 MLTPL
PVCLLF12125CTESF 12" CLD 23 MLTPL

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



 
VAMEIN DE ESPAÑA S.A. 
Temple 1 28760 Tres Cantos
28760 Madrid 
Spain 
34 91 803 45 17
Visit this company's website


Facility : Madrid, Spain

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Valves[1] [G]
100 Series Wafer Type Butterfly Valve 2" - 48" CLD 23 MLTPL
160 Series Wafer Light Type Butterfly Valve 2" - 12" CLD 23 MLTPL
200 Series Flanged Type Butterfly Valve 2" - 48" CLD 23 MLTPL
500 Series Lug Type Butterfly Valve 2" - 24" CLD 23 MLTPL

[1] Certified for EPDM seat and stainless steel disc only.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



 
VELIENT PEC INDIA PRIVATE LIMITED 
1st Floor, B-101-102-103 Shivalik Plaza
NR Utran-Kapodra Bridge, Utran 
Surat, GJ 394105 
India 
91 84 8590 3535
Visit this company's website


Facility : Surat, Gujarat, India

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Reverse Osmosis Element
FN-4021-BWFR[1] [4] 4" x 21" CLD 23 MLTPL
PA-8040-BWFR[3] [4] 8" x 40" CLD 23 MLTPL
FN-4021-LPBW[1] [4] 4" x 21" CLD 23 MLTPL
FN-4021-SW[1] [4] 4" x 21" CLD 23 MLTPL
FN-4021-ULP[1] [4] 4" x 21" CLD 23 MLTPL
FN-4021-XLP[1] [4] 4" x 21" CLD 23 MLTPL
FN-4040-BWFR[2] [4] 4" x 40" CLD 23 MLTPL
FN-4040-HRW[2] [4] 4" x 40" CLD 23 MLTPL
FN-4040-LPBW[2] [4] 4" x 40" CLD 23 MLTPL
FN-4040-SW[2] [4] 4" x 40" CLD 23 MLTPL
FN-4040-ULP[2] [4] 4" x 40" CLD 23 MLTPL
FN-4040-XLP[2] [4] 4" x 40" CLD 23 MLTPL
FN-8040-BWFR[3] [4] 8" x 40" CLD 23 MLTPL
FN-8040-HRW[3] [4] 8" x 40" CLD 23 MLTPL
FN-8040-LPBW[3] [4] 8" x 40" CLD 23 MLTPL
FN-8040-SW[3] [4] 8" x 40" CLD 23 MLTPL
FN-8040-ULP[3] [4] 8" x 40" CLD 23 MLTPL
FN-8040-XLP[3] [4] 8" x 40" CLD 23 MLTPL
FX-4021-BWFR[1] [4] 4" x 21" CLD 23 MLTPL
FX-4021-HRW[1] [4] 4" x 21" CLD 23 MLTPL
FX-4021-LPBW[1] [4] 4" x 21" CLD 23 MLTPL
FX-4021-SW[1] [4] 4" x 21" CLD 23 MLTPL
FX-4021-ULP[1] [4] 4" x 21" CLD 23 MLTPL
FX-4021-XLP[1] [4] 4" x 21" CLD 23 MLTPL
FX-4040-BWFR[2] [4] 4" x 40" CLD 23 MLTPL
FX-4040-HRW[2] [4] 4" x 40" CLD 23 MLTPL
FX-4040-LPBW[2] [4] 4" x 40" CLD 23 MLTPL
FX-4040-SW[2] [4] 4" x 40" CLD 23 MLTPL
FX-4040-ULP[2] [4] 4" x 40" CLD 23 MLTPL
FX-4040-XLP[2] [4] 4" x 40" CLD 23 MLTPL
FX-8040-BWFR[3] [4] 8" x 40" CLD 23 MLTPL
FX-8040-HRW[3] [4] 8" x 40" CLD 23 MLTPL
FX-8040-LPBW[3] [4] 8" x 40" CLD 23 MLTPL
FX-8040-SW[3] [4] 8" x 40" CLD 23 MLTPL
FX-8040-ULP[3] [4] 8" x 40" CLD 23 MLTPL
FX-8040-XLP[3] [4] 8" x 40" CLD 23 MLTPL
OTA2-4021-BWFR[1] [4] 4" x 21" CLD 23 MLTPL
OTA2-4040-BWFR[2] [4] 4" x 40" CLD 23 MLTPL
OTA2-8040-BWFR[3] [4] 8" x 40" CLD 23 MLTPL
PA-4021-BWFR[1] [4] 4" x 21" CLD 23 MLTPL
PA-4040-BWFR[2] [4] 4" x 40" CLD 23 MLTPL
FN-4021-HRW[1] [4] 4" x 21" CLD 23 MLTPL

[1] The following trade names require a pre-service flush at a flow rate of 2 liters per
    minute (lpm) for 2 hours hours using tap water.
[2] The following trade names require a pre-service flush at a flow rate of 4.2 liters per
    minute (lpm) for 2 hours hours using tap water.
[3] The following trade names require a pre-service flush at a flow rate of 16.7 liters per
    minute (lpm) for 2 hours hours using tap water.
[4] Products are certified for a minimum daily permeate generation of 10,000 L for use in
    public water treatment facilities.



 
Veolia Water Technologies & Solutions 
3600 Horizon Boulevard
Trevose, PA 19053 
United States 
888-898-6766 
215-942-3534


Facility : Westborough, MA

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Miscellaneous Process Devices/Components [G]
NFEDR AR908 coated electrode [3] CLD 23 MLTPL

[1] AR204, CR64, CR67 and AR908 are certified for a minimum flow of 60,000 gallons per day
    when used in the EDR-STACK, MK4 and 30,000 gallons per day when used in the EDR-STACK,
    V20. 
[2] AR404 Coated Electrode are certified for a minimum flow of 30,000 gallons per day and
    used in EDR-STACK, V20 and EDR-STACK, MK4
[3] NFEDR AR908 Coated Electrode are certified for a minimum flow of 60,000 gallons per day
    and used in trade name EDR-STACK, MK4 
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



Facility : Minnetonka, MN

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Filtration Devices/Components[1] [G]
Adv. Industrial Grade filter (AIG.Z) 2 1/2" CLD 23 PP
Filterplex.Z (FP.Zs) 2 1/2" CLD 23 PP
HYTREX - GX SERIES 2 1/2" CLD 23 PP
HYTREX - LD SERIES 2 1/2" CLD 23 PP
HYTREX - RX SERIES 2 3/4" CLD 23 PP
HYTREX - SX SERIES 2 1/2" CLD 23 PP
MB01-10 2 1/2" CLD 23 PP
MB01-20 2 1/2" CLD 23 PP
MB05-10 2 1/2" CLD 23 PP
MB05-20 2 1/2" CLD 23 PP
MB10-10 2 1/2" CLD 23 PP
MB10-20 2 1/2" CLD 23 PP
MB25-10 2 1/2" CLD 23 PP
MB25-20 2 1/2" CLD 23 PP
P-MBC01-10 2 1/2" CLD 23 PP
P-MBC01-20 2 1/2" CLD 23 PP
PURTREX - PX SERIES 2 1/2" CLD 23 PP
Purtrex Plus (PXP.Z) 2 1/2" CLD 23 PP
Ro.Save.Z 2 1/2" CLD 23 PP
SWRO.Z [MM-LL-XXX] 2 1/2" CLD 23 PP
Wellpro.Z (WP) 2 1/2" CLD 23 PP
Z.Core (Z.Core MM-LL-XXX) 2 1/2" CLD 23 PP
Z.Plex Absolute.Za (Abs.Za MM-LL-XXX) 2.6" CLD 23 PP
Z.Plex EDR.Z (EDR.Z MM-LL-XXX) 2 1/2" CLD 23 PP
Z.Plex HF.EDR.Z (MM-LL-XXX) 6 1/2"" CLD 23 PP
Z.Plex HF.RO.Zs (MM-LL-XXX) 6 1/2" CLD 23 PP
Z.Plex Muni.Zs (Muni.Zs MM-LL-XXX) 2 1/2" CLD 23 PP
Z.Plex ROsave.Zs (RO.Zs MM-LL-XXX) 2 1/2" CLD 23 PP
[Z.Plex HF.Za (MM-LL-XXX)] 6 1/2" CLD 23 PP
[Z.Plex HF.Zs (MM-LL-XXX)] 6 1/2" CLD 23 PP

[1] Number shown in size is the outer diameter. 
    
    MM: Micron rating 
    95 - 0.5
    01 to 200 (Equals micron rating as indicated by number) 
    
    LL: Length
    10 - 70"
    
    XXX: End adapters and O-Rings/Gasket options
    
    The PX, GX, LD, SX, RX, RO.Save.Z, WellproZ (WP), Purtrex Plus (PXP.Z) and Adv
    Industrial Grade filter (AIG.Z) designations will generally follow the format
    XXYY-ZZ-AB. 
    XX - Series type
    YY - Micron rating
    ZZ - Length
    AB - End Adapters and O-Rings/Gasket options
    Additional Suffixes:
    YKP  - Single Santoprene gasket, Polypropylene spring
    YKLP - Single Santoprene gasket, Extended core, Polypropylene spring
    YYP - Two santoprene gaskets
    
    End adapter and O-rings are optional and a suffix may or may not appear.
    
    End 1
    A - Open end w/ gasket
    E - 222 Adapter w/ O-Ring
    F - 226 Adapter w/ O-Ring
    L - Extended core
    X - Open end (no adapter)
    Y - 1 inch (2.54 cm) Open end gasket
    
    End 2
    A - Open end w/gasket
    K - Self seal spring
    H - Fin
    S - Solid end
    T - 338 adapter w/O-ring
    X - Open end (no adapter)
    Y - 1 inch (2.54 cm) Open end Gasket
    
    O-Ring and Gasket Material
    B - Buna-N
    E - EPDM
    P - Santoprene
    S - Silicone
    V - Viton2
    
    Viton is a registered trademark of DuPont Dow Elastomers.
    
    Certified for a minimum flow of 720 gallons/day/10" of filter.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

Reverse Osmosis Element[2] [G]
AG8040F (3032515) 8" CLD 23 MLTPL
AG8040F-400 (3032518) 8" CLD 23 MLTPL
AG8040F-400 FR, 34 (3136931) 8" CLD 23 MLTPL
AG8040F-440 (3194307) 8" CLD 23 MLTPL
AK8040F (3039160) 8" CLD 23 MLTPL
AK8040F-400 (3039161) 8" CLD 23 MLTPL
AK8040F-440 (3194308) 8" CLD 23 MLTPL
CE8040F, (3097264) 8" CLD 23 MLTPL
Durafoul RO1 (3198543) 8" x 40" CLD 23 MLTPL
HL8040F-400 (1207240) 8" CLD 23 MLTPL
MUNI-NF-400 (1242400) 8" CLD 23 MLTPL
MUNI-RO-400-LE-WT-FF (3044144) 8" CLD 23 MLTPL

[2] Elements with 4" diameter are Certified for a minimum flow of 7,078 liters/day. 
    Elements with 8" diameter are Certified for a minimum flow of 29,602 liters/day. 
    Certification is for the membrane elements only.  Product requires a 2-hour conditioning
    flush to drain with de-ionized water at 12L/min before use.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
      documentation shipped with the product are Certified.


Facility : Wuxi New District, China

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Reverse Osmosis Element[1] [G]
AG4040F LF WET (3056468) 8" x 40" CLD 23 MLTPL
AG4040FM (3032513) 4" x 40" CLD 23 MLTPL
AG8040F (3032515) 8" x 40" CLD 23 MLTPL
AG8040F-400 (3032518) 8" x 40" CLD 23 MLTPL
AG8040F-400 FR, 34 (3136931) 8" x 40" CLD 23 MLTPL
AG8040F-400 LF, 34 (3149711) 8" x 40" CLD 23 MLTPL
AG8040F-440 (3194307) 8" x 40" CLD 23 MLTPL
AK4040FM (3039082) 4" x 40" CLD 23 MLTPL
AK8040F (3039160) 8" x 40" CLD 23 MLTPL
AK8040F-400 (3039161) 8" x 40" CLD 23 MLTPL
AK8040F-440 (3194308) 8" x 40" CLD 23 MLTPL
Durafoul RO1 (3198543) 8" x 40" CLD 23 MLTPL
Element, Industrial RO7 HP 8040F35 (31690180) 8" x 40" CLD 23 MLTPL
HL4040FM (1207236) 8" x 40" CLD 23 MLTPL
HL8040F-400 (1207240) 8" x 40" CLD 23 MLTPL
HN4040FM (3205804) 4" x 40" CLD 23 MLTPL
HN8040F-400 (3205802) 8" x 40" CLD 23 MLTPL
HN8040F-440 (3205803) 8" x 40" CLD 23 MLTPL
OSMO-BEV-RO-FF (1233032) 8" x 40" CLD 23 MLTPL

[1] Elements with 4" diameter are certified for a minimum flow of 7,078 liters/day. 
    Elements with 8" diameter are certified for a minimum flow of 29,602 liters/day. 
    Certification is for the membrane elements only.  Product requires a 2-hour conditioning
    flush to drain with potable water before use.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



Facility : Bitterfeld-Wolfen, Germany

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Reverse Osmosis Element[1] [G]
AG-400 FR H[3] 8" x 40" CLD 23 MLTPL
AG-400 P FR[3] 8" x 40" CLD 23 MLTPL
AG-400 P FR, 34 (ASD)[3] 8" x 40" CLD 23 MLTPL
AG-85 P FR[2] 3.9" x 40" CLD 23 MLTPL
AG8040F-400[3] 8" x 40" CLD 23 MLTPL
AG8040F-400 FR[3] 8" x 40" CLD 23 MLTPL
AG8040F-400 LE[3] 8" x 40" CLD 23 MLTPL
AG8040F-440[3] 8" x 40" CLD 23 MLTPL
AG8040F-440 LE[3] 8" x 40" CLD 23 MLTPL
AK8040F-400[3] 8" x 40" CLD 23 MLTPL
AK8040F-440[3] 8" x 40" CLD 23 MLTPL

[1] The Listed size is the element diameter x length.
[2] 3.9 x 40 inch elements are certified for a minimum daily permeate flow of 4,163 L.
[3] 8 x 40 inch elements are certified for a minimum daily permeate flow of 29,000 L.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

NOTE: Only products bearing the NSF Mark are Certified.


Facility : Oroszlány, Hungary

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Reverse Osmosis Element [G]
AG8040F-400 FR,34 (3136931)[4] 8" x 40" CLD 23 MLTPL
AG8040F (3032515)[4] 8" x 40" CLD 23 MLTPL
AG8040F-400 (3032518)[4] 8" x 40" CLD 23 MLTPL
AG4040FM (3032513)[4] 4" x 40" CLD 23 MLTPL
AK4040FM (3039082)[4] 4" x 40" CLD 23 MLTPL
AK8040F (3039160)[4] 8" x 40" CLD 23 MLTPL
AK8040F-400 (3039161)[4] 8" x 40" CLD 23 MLTPL

[1] Certified for a minimum flow of 29,602 liters/day.
[2] Product requires a 2-hour conditioning flush to drain with potable water before use.
[4] Elements with 4" diameter are Certified for a minimum flow of 7,078 liters/day. 
    Elements with 8" diameter are Certified for a minimum flow of 29,602 liters/day. 
    Product requires a 2-hour conditioning flush to drain with de-ionized water as 12L/min
    before use.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

Ultrafiltration Devices [G]
ZW700B-10072[12] [15] [16] 25 cm x 185 cm CLD 23 MLTPL
ZeeWeed 500S[5] [19] 27.7 cm x 178 cm CLD 23 MLTPL
ZeeWeed 500a UF[6] [19] NA CLD 23 MLTPL
ZeeWeed 500b UF[7] [19] NA CLD 23 MLTPL
ZeeWeed 500c UF[8] [19] NA CLD 23 MLTPL
ZeeWeed 500d UF[9] [19] NA CLD 23 MLTPL
ZW500Ds [9] [19] NA CLD 23 MLTPL
ZeeWeed 1000V2 Module[10] [19] NA CLD 23 MLTPL
ZeeWeed 1000 V3[11] [19] NA CLD 23 MLTPL
ZeeWeed 1000 V4[11] [19] NA CLD 23 MLTPL
ZeeWeed 1500 Module[19] 7" x 70"[12] CLD 23 MLTPL
ZeeWeed 1500 RMS[13] [14] [19] NA CLD 23 MLTPL
ZW700B-RMS[17] [18] [19] 25 cm x 185 cm CLD 23 MLTPL
ZW1000- NGC Assembly[11] [19] 18" CLD 23 MLTPL

[5] Certified for a minimum daily flow of 5,000 liters per day.  Flush for 2.5-5 gpm for 7.5
    - 15 hours.
[6] Certification based on minimum daily flow of 8,000 liters per module.
[7] Certification based on minimum daily flow of 11,000 liters per module.
[8] Certification based on minimum daily flow of 4,000 liters per module.
[9] Certification based on minimum daily flow of 5,000 liters per day per module.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.
[10] Certification based on minimum daily permeate flow of 12,000 liters per module.
[11] Certification based on minimum daily flow when in operation of 12,000 liters per module.
[12] Size is expressed as diameter x length.
[13] Certification based on minimum daily flow of 25,000 liters per module.
[14] Modules should be flushed for 30 minutes with tap water at 10 gallons per minute.
[15] The ZW700B-450 model is Certified for a minimum daily flow of 3,180 L.				
     The ZW700B-4100 model is Certified for a minimum daily flow of 6,960 L.				
     The ZW700B-4150 model is Certified for a minimum daily flow of 10,800 L.				
     The ZW700B-6100 model is Certified for a minimum daily flow of 14,400 L.				
     The ZW700B-8060/X model is Certified for a minimum daily flow of 16,000 L.				
     The ZW700B-9060 model is Certified for a minimum daily flow of 22,000 L. 				
     The ZW700B-10060 model is Certified for a minimum daily flow of 24,000 L.
[16] Flush the models under the following conditions:			
     ZW700B-450 for 30 minutes at a flow rate of 5,168 liters per minute using tap water.
     ZW700B-4100 for 30 minutes at a flow rate of 11,310 liters per minutes using tap water.
     				
     ZW700B-4150 for 30 minutes at a flow rate of 17,550 liters per minutes using tap water.
     				
     ZW700B-6100 for 30 minutes at a flow rate of 23,400 liters per minutes using tap water.
     				
     ZW700B-8060/X for 75 minutes at a flow rate of 35-53 liters per minutes using tap water.
     				
     ZW700B-9060 for 75 minutes at a flow rate of 35-53 liters per minutes using tap water.
     ZW700B-10060 for 60 minutes at a flow rate of 50-80 liters per minute using raw feed
     water.
[17] ZW700B-RMS is certified to a minimum daily flow of 34,000 liters per day.
[18] ZW700B-RMS is flushed for 80 minutes at a flow rate of 70-116 liters per minute using
     raw feed water.
[19] ZW and ZeeWeed are interchangeable and denote the same model. 

[3] Product requires a 2-hour conditioning flush to drain with de-ionized water at 12 L/min
    before use.


Facility : Hoskote, Bangalore, India

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Reverse Osmosis Element[1] [G]
AG8040F-400 LE (3160987) 8" x 40" CLD 23 MLTPL
AG8040F-440 (3194307) 8" x 40" CLD 23 MLTPL
AG8040F-440 LE (3194309) 8" x 40" CLD 23 MLTPL
AK8040F-440 (3194308) 8" x 40" CLD 23 MLTPL
ELEMENT, AG4040F, 34 - 3154063 4" x 40" CLD 23 MLTPL
ELEMENT, AG4040FM - 3032513 4" x 40" CLD 23 MLTPL
ELEMENT, AG8040F - 3032515 8" x 40" CLD 23 MLTPL
ELEMENT, AG8040F 400FR, 34 HF - 3156629 8" x 40" CLD 23 MLTPL
ELEMENT, AG8040F-400 - 3032518 8" x 40" CLD 23 MLTPL
ELEMENT, AG8040F-400 FR,34 - 3136931 8" x 40" CLD 23 MLTPL
ELEMENT, AK4040FM - 3039082 4" x 40" CLD 23 MLTPL
ELEMENT, AK8040F-400 - 3039161 8" x 40" CLD 23 MLTPL
Element, AG8040F-400 LF, 34 - 3149711 8" x 40" CLD 23 MLTPL
Element, AK8040F - 3039160 8" x 40" CLD 23 MLTPL

[1] Elements with 4" diameter are Certified for a minimum flow of 7,078 liters/day. 
    Elements with 8" diameter are Certified for a minimum flow of 29,602 liters/day.
    
    The products require a 2-hour conditioning flush to drain with de-ionized water at 10
    gpm before use.
    
    
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



 
Veolia Water Technologies & Solutions 
3600 Horizon Boulevard
Trevose, PA 19053 
United States 
952-988-6697


Facility : # 1 USA

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Microfiltration Devices
CX 1-2-3-4-B[1] [2] CLD 23 MLTPL

[1] Where CX - Universal Depth Cartridge Filter
    1 & 2         - micron rating
    3 & 4         - length
    B               - Bulk Packaged
[2] Models 20" and smaller are evaluated to point-of-entry use.
    Models larger than 20" are certified for a minimum daily flow rate of 2880 gallons.



 
Veolia Water Technologies & Solutions 
3600 Horizon Boulevard
Trevose, PA 19053 
United States 
952-988-6697


Facility : # 2 USA

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Reverse Osmosis Element[1]
1233033 OSMO BEV-NF-FF 8" x 40" CLD 23 MLTPL
3097264 CE8040F 8" x 40" CLD 23 MLTPL
3205465 BEV-NF-CA-CG 8" x 40" CLD 23 MLTPL

[1] These models are certified for a minimum flow of 1100 gallons per day. Product requires
    a 1 hour conditioning flush with potable water prior to use.



 
Veolia Water Technologies & Solutions 
4636 Somerton Road
Trevose, PA 19053 
United States 
952-988-6697


Facility : Maple Lake, MN

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Filtration Devices/Components
Z.Plex HF.RO.Zs (MM-LL-XXX) 6.5" CLD 23 PP
Zplex. HF.EDR.Z (MM-LL-XXX) 6.5" CLD 23 PP
[Z.Plex HF.Za (MM-LL-XXX)] 6.5" CLD 23 PP
[Z.Plex HF.Zs (MM-LL-XXX)] 6.5" CLD 23 PP

[1] Number shown in size is the outer diameter.
    MM - Micron rating
         95 - 0.5
         01 to 200 (Equals micron rating as indicated by number)
    LL - Length (inches)
         10 - 70
    XXX - End Adapters and O-Rings/Gasket Options
    The PX, GX, LD, SX, RX, RO.Save.Z, WellproZ (WP), Purtrex Plus (PXP.Z) and Adv
    Industrial Grade filter (AIG.Z) designations will generally follow
    the format XXYY-ZZ-AB.
    XX - Series type
    YY - Micron rating
    ZZ - Length
    AB - End Adapters and O-Rings/Gasket options
    Additional Suffixes:
    YKP  - Single Santoprene gasket, Polypropylene spring
    YKLP - Single Santoprene gasket, Extended core, Polypropylene spring
    YYP  - Two Santoprene Gaskets
    End adapter and O-rings are optional and a suffix may or may not appear
    End 1
    A - Open End w/Gasket
    E - 222 Adapter with O-Ring
    F - 226 Adapter with O-Ring
    Y - 1 inch (2.54 cm) Open end Gasket
    L - Extended Core
    X - Open end (No adapter)
    End 2
    A - Open End w/Gasket
    K - Self Seal Spring
    H - Fin
    S - Solid End
    X - Open End (No adapter)
    Y - 1 inch (2.54 cm) Open end Gasket
    T - 338 adapter w/ O-ring
    O-Ring and Gasket Material
    B - Buna-N
    E - EPDM
    P - Santoprene
    S - Silicone
    V - Viton2
[2] Viton is a registered trademark of DuPont Dow Elastomers.
[3] Certified for a minimum flow of 720 gallons/day/10" of filter.


 
Veolia Water Technologies Treatment Solutions USA, Inc. 
4880 Cox Road
Suite 101 
Glen Allen, VA 23060 
United States 
804-756-7600
Visit this company's website


Facility : Addison, IL

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Filter Underdrain
Monoflor HD Ledge Plate [1] CLD 23 MLTPL
Monoflor HD Nozzle Adapter (long or short) [1] CLD 23 MLTPL
Monoflor HD Shim Collar [1] CLD 23 MLTPL
Monoflor HD Support Form [1] CLD 23 MLTPL

[1] Certified for a minimum flow rate of 1,440 gallons/day/square foot.



Facility : Alexandria, Ontario, Canada

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Miscellaneous Process Devices/Components
F-110 (C-11 and C-00) [1] CLD 23 MLTPL
F-120 (C-12 and C-00) [1] CLD 23 MLTPL
F-130 (C-13 and C-00) [1] CLD 23 MLTPL
F-140 (C-14 and C-00) [1] CLD 23 MLTPL

[1] Certified for a minimum flow rate of 1,440 gallons/day/square foot.

Miscellaneous Treatment Devices/Components
Monoflor HD Ledge Plate[2] [1] CLD 23 MLTPL
Monoflor HD Nozzle Adapter (long or short)[2] [1] CLD 23 MLTPL
Monoflor Shim Collar[2] [1] CLD 23 MLTPL

[1] Certified for a minimum flow rate of 1,440 gallons/day/square foot.
[2] Certification is for components of a filter underdrain system.



 
Victaulic Co. 
4901 Kesslersville Road
Easton, PA 18040 
United States 
800-742-5842 
610-559-3300
Visit this company's website


Facility : # 2 Dalian, China

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Valves[1] [G]
461 (Butterfly Valve) 2" - 12" C. HOT MLTPL
E461 (Butterfly Valve) 2" - 12" C. HOT MLTPL
462 (Butterfly Valve) 2" - 12" C. HOT MLTPL

[1] Models may feature suffix "SS" for commercial purposes.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



Facility : Duluth, GA

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Manifolds[1] [G]
26 (Outlet Header) 1 1/2"x1" - 12"x12" CLD 23 SS
57 (Concentric Reducing Header) 1 1/2"x1" - 12"x12" CLD 23 SS
58 (Eccentric Reducing Header) 1 1/2"x1" - 12"x12" CLD 23 SS

[1] Models may feature suffix "SS" for commercial purposes.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



Facility : Easton, PA

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Valves[1] [G]
461 (Butterfly Valve)[372] 2" - 12" C. HOT MLTPL
462 (Butterfly Valve)[372] 2" - 12" C. HOT MLTPL
702 (Butterfly Valve) 2 1/2" - 10" CLD 23 MLTPL
7A2 (Butterfly Valve) 2 1/2" - 10" CLD 23 MLTPL
7B2 (Butterfly Valve) 2 1/2" - 10" CLD 23 MLTPL
E461 (Butterfly Valve)[372] 2" - 12" C. HOT MLTPL

[1] Models may feature suffix "SS" for commercial purposes.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.
[372] Product also complies with NSF/ANSI 372.



Facility : Wielkofolski, Poland

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Valves[1] [G]
461 (Butterfly Valve)[372] 2" - 12" C. HOT MLTPL
462 (Butterfly Valve) [372] 2" - 12" C. HOT MLTPL

[1] Module may feature suffix "SS" for commercial purposes.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.
[372] Product also complies with NSF/ANSI/CAN 372.



Viega LLC. 
585 Interlocken Boulevard
Broomfield, CO 80021 
United States 
800-774-5237 


Facility : Ninghai, Zhejiang, China

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Valves [G]
ProPress Full Port 2-Pc Ball Valve w/Drain Port and Cap P x P-Model 2975.3ZL[1] 1/2" - 3/4" C. HOT MLTPL
Threaded Full-Port 2-Piece Ball Valve NPT x NPT - Model 2800ZL[2] 1/2" - 2" C. HOT MLTPL

[1] Certified for the following configurations:
    87845 / 13755, 1/2"
    87850 / 13756, 3/4"
[2] Certified for the following configurations:
    87920 / 13679, 1/2"
    87925 / 13677, 3/4"
    87930 / 13681, 1"
    87935 / 13676, 1 1/4"
    87940 / 13678, 1 1/2"
    87945 / 13680, 2"
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



Facility : Ennest, Germany

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Valves
MegaPress 316 Full Port Ball Valve (2pc) Model 5170 #28975, PxP 1/2" C. HOT MLTPL
MegaPress 316 Full Port Ball Valve (2pc) Model 5170 #28980, PxP 3/4" C. HOT MLTPL
MegaPress 316 Full Port Ball Valve (2pc) Model 5170 #28985, PxP 1" C. HOT MLTPL
MegaPress 316 Full Port Ball Valve (2pc) Model 5170 #28990, PxP 1 1/4" C. HOT MLTPL
MegaPress 316 Full Port Ball Valve (2pc) Model 5170 #28995, PxP 1 1/2" C. HOT MLTPL
MegaPress 316 Full Port Ball Valve (2pc) Model 5170 #29000, PxP 2" C. HOT MLTPL
ProPress Ball Valve (formerly known as Lead Free ProPress Bronze Ball Valve)[G] 1/2" - 2" C. HOT MLTPL

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



Facility : Hagen Germany

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material
MegaPress 316 Butterfly Valve - Model 5179.8ZL[2] [G] 2 1/2" - 4" C. HOT MLTPL
ProPress Butterfly Valve - Model 2979.8ZL[1] [G] 2 1/2" - 4" C. HOT MLTPL

[1] Certified for the following configurations:
         87660 / 13758, 2 1/2"
         87665 / 13757, 3"
         87670 / 13759, 4"
[2] Certified for the following configurations:
         87675, 2 1/2"
         87680, 3"
         87685, 4"
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



Facility : Madrid, Spain

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Mechanical Devices
MegaPress 316 Wafer Check Valve - Model 5174XL[1] [G] 2 1/2", 3", 4" C. HOT MLTPL
ProPress Wafer Check Valve - Model 2974.3XL[2] [G] 2 1/2", 3", 4" C. HOT MLTPL

[1] Certified for the following configurations:
      86960, 2 1/2"
      86965, 3"
      86970, 4"
[2] Certified for the following configurations:
      86975 / 13747, 2 1/2"
      86980 / 13748, 3"
      86985 / 13746, 4"
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



 
Viterra Systems LLC 
1830 Fllower Ave.
Duarte, CA 91010 
United States 
1-626-716-2238


Facility : Guangdong, China

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Ball Valves
Compact Ball Valve w/EPDM O-ring Seal(FIPT × FIPT) 1/2" CLD 23 MLTPL
Compact Ball Valve w/EPDM O-ring Seal(FIPT × FIPT) 3/4" CLD 23 MLTPL
Compact Ball Valve w/EPDM O-ring Seal(FIPT × FIPT) 1" CLD 23 MLTPL
Compact Ball Valve w/EPDM O-ring Seal(FIPT × FIPT) 1-1/4" CLD 23 MLTPL
Compact Ball Valve w/EPDM O-ring Seal(FIPT × FIPT) 1-1/2" CLD 23 MLTPL
Compact Ball Valve w/EPDM O-ring Seal(FIPT × FIPT) 2" CLD 23 MLTPL
Compact Ball Valve w/FKM O-ring Seal(FIPT × FIPT) 1/2" CLD 23 MLTPL
Compact Ball Valve w/FKM O-ring Seal(FIPT × FIPT) 3/4" CLD 23 MLTPL
Compact Ball Valve w/FKM O-ring Seal(FIPT × FIPT) 1" CLD 23 MLTPL
Compact Ball Valve w/FKM O-ring Seal(FIPT × FIPT) 1-1/4" CLD 23 MLTPL
Compact Ball Valve w/FKM O-ring Seal(FIPT × FIPT) 1-1/2" CLD 23 MLTPL
Compact Ball Valve w/FKM O-ring Seal(FIPT × FIPT) 2" CLD 23 MLTPL
Compact Ball Valve w/FKM O-ring Seal(SOC × SOC) 1/2" CLD 23 MLTPL
Compact Ball Valve w/FKM O-ring Seal(SOC × SOC) 3/4" CLD 23 MLTPL
Compact Ball Valve w/FKM O-ring Seal(SOC × SOC) 1" CLD 23 MLTPL
Compact Ball Valve w/FKM O-ring Seal(SOC × SOC) 1-1/4" CLD 23 MLTPL
Compact Ball Valve w/FKM O-ring Seal(SOC × SOC) 1-1/2" CLD 23 MLTPL
Compact Ball Valve w/FKM O-ring Seal(SOC × SOC) 2" CLD 23 MLTPL

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.


 
Vontron Technology Co., Ltd. 
No.1518 LiYang Road
Guiyang National High-Tech Industrial 
Development Zone, Guiyang, Guizhou 
China 
86 851 86270379
Visit this company's website


Facility : Guizhou, China

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Reverse Osmosis Element[1] [2] [3] [4] [5]
FR11-4040 4" x 40" CLD 23 MLTPL
FR11-8040 8" x 40" CLD 23 MLTPL
FR12-8040 8" x 40" CLD 23 MLTPL
SW8040FR-380 8" x 40" CLD 23 MLTPL
VNF1-2540 2 1/2" x 40" CLD 23 MLTPL
VNF1-4040 4" x 40" CLD 23 MLTPL
VNF1-8040 8" x 40" CLD 23 MLTPL
VNF2-2540 2 1/2" x 40" CLD 23 MLTPL
VNF2-4040 4" x 40" CLD 23 MLTPL
VNF2-8040 8" x 40" CLD 23 MLTPL
VNF400-SPHL 8" x 40" CLD 23 MLTPL

[1] Certified for both wet and dry elements.
[2] All elements (wet and dry) require a pre-service flush:
    Trade Name LP400-LD requires a pre-service flush at 5 gallons per minute (gpm) for 6
    hours with tap water.
    Trade Name LP440-MAX requires a pre-service flush at 5 gallons per minute (gpm) for 6
    hours with tap water.
    Trade Name ULP400-LD requires a pre-service flush at 5 gallons per minute (gpm) for 6
    hours with tap water.
    Trade Name ULP440-MAX requires a pre-service flush at 5 gallons per minute (gpm) for 6
    hours with tap water.
    Trade Name PURO-II requires a pre-service flush at 5 gallons per minute (gpm) for 6
    hours with tap water.
    Trade Name LE-8040UE requires a pre-service flush at 5 gallons per minute (gpm) for 6
    hours with tap water.
    Trade Name LE-440-UE requires a pre-service flush at 5 gallons per minute (gpm) for 6
    hours with tap water.
    Trade Name PURO-UE requires a pre-service flush at 5 gallons per minute (gpm) for 6
    hours with tap water.
    Trade Name LP400-SP requires a pre-service flush at 5 gallons per minute (gpm) for 6
    hours with tap water.
    Trade Name ULP400-SP requires a pre-service flush at 5 gallons per minute (gpm) for 6
    hours with tap water.
    Trade Name VNF400-SPHL requires a pre-service flush at 5 gallons per minute (gpm) for 6
    hours with tap water.
    Trade Name ULP4040PRO requires a pre-service flush at 0.9 gallons per minute (gpm) for 6
    hours with tap water.
    Trade Name LP4040PRO requires a pre-service flush at 1.3 gallons per minute (gpm) for 6
    hours with tap water.
    Trade Name VHD-8040/34G requires a pre-service flush at 5 gallons per minute (gpm) for 6
    hours with tap water.
    Trade Name VHD-4038G requires a pre-service flush at 5 gallons per minute (gpm) for 6
    hours with tap water.
    Trade Name HWRO-380/34G requires a pre-service flush at 5 gallons per minute (gpm) for 6
    hours with tap water.
    All other trade names: Fill the RO pressure vessel with qualified pretreated water. The
    feed water pressure shall be restricted to 50 psi and the flow rate shall be equal to 16
    GPM (gallons per minute). The rejected water and product water shall be discharged
    completely. The membrane element shall be flushed for 6 hours. No antiscalant shall be
    added in flushing.	
[3] The SW11-2521, SW11-2540, SW11-4021, ULP11-4021, ULP21-2521, ULP21-2540, ULP21-4021,
    ULP31-4021, SW40, SW2540 elements are evaluated for point-of-entry end uses.
[4] Certified for minimum flow rate of:
    LP21-4040, HT5-4040-LP, FR11-4040, 4040, SW21-4040, ULP11-4040, ULP21-4040, M-4040,
    ULP31-4040, XLP11-4040, XLP11-4040-MAX,
    SW4040HR, SW4040LE: 8,000 L/day
    FR11-8040, HOR21-8040, HOR21-4040, LP21-8040, LP22-8040, SW21-8040, SW22-8040,
    ULP12-8040, ULP21-8040, ULP22-8040, ULP32-8040,
    HOR22-8040, SW8040XHR-400, SW8040HR-400, SW8040LE-400, SW8040SU-400 and SW8040XLE-400:
    30,000 L/day
    LP400-LD, ULP400-LD, LE-8040UE, LP400-SP, ULP400-SP and VNF400-SPHL: 10,500 gal/day
    PURO-II and PURO-UE: 11,500 gal/day
    ULP440-MAX and LE-440-UE: 12,000 gal/day	
    SW8040XHR-440: 4,200 gal/day
    SW8040HR-440: 3,500 gal/day
    SW8040LE-440: 5,250 gal/day
    SW8040XLE-440: 6,300 gal/day
    LP440: 7,700 gal/day
    ULP440: 8,750 gal/day
    LE-8040: 8,400 gal/day
    XLP12-8040: 7,000 gal/day
    LP100: 1750: 1,750 gal/day
    LP11-4040: 2,100 gal/day
    ULP100: 1,960 gal/day
    VNF1-8040, VNF2-8040 and PURO-LE: 7,000 gal/day
    VNF1-4040: 1,400 gal/day
    VNF2-4040: 1,260 gal/day
    VNF1-2540: 455 gal/day
    VNF2-2540: 490 gal/day
    PURO, PURO-I and FR12-8040: 7,350 gal/day
    PURO-LE: 7,000 gal/day
    ULP4040PRO: 2,000 gal/day
    LP4040PRO: 2,800 gal/day
    LP440-MAX: 12,500 gal/day
    VHD-8040/34G: 9000 gal/day
    VHD-4038G: 2100 gal/day
    HWRO-380/34G: 9000 gal/day
    LP4040-C: 2400 gal/day
    ECO4040HR: 2200 gal/day
    ECO4040EWS: 2200 gal/day
[5] Only products bearing the NSF Mark on the product, product packaging, and/or
    documentation shipped with the product are Certified.



 
Wanhua Chemical Group Co., Ltd. 
No. 59 Chongqing Street
Yantai Econ. and Tech. Dev. Zone 
Yantai, Shandong 264006 
China 
86 535 202 6105
Visit this company's website


Facility : Yantai, Shandong, China

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Reverse Osmosis Element
BW-4040-FR[2] [4] 4" x 40" CLD 23 MLTPL
BW-8040-400-FR[2] [4] 8" x 40" CLD 23 MLTPL
BW-8040-400-XFR[2] [4] 8" x 40" CLD 23 MLTPL
BW-FR[3] [5] CLD 23 MLTPL
BW-XFR[3] [5] CLD 23 MLTPL
SW-4040-HF[2] [4] 4" x 40" CLD 23 MLTPL
SW-4040-XHF[2] [4] 4" x 40" CLD 23 MLTPL
SW-8040-400-HF[2] [4] 8" x 40" CLD 23 MLTPL
SW-8040-400-XHF[2] [4] 8" x 40" CLD 23 MLTPL
SW-8040-440-HF[2] [4] 8" x 40" CLD 23 MLTPL
SW-8040-440-XHF[2] [4] 8" x 40" CLD 23 MLTPL
SW-HF[3] [5] CLD 23 MLTPL
SW-XHF[3] [5] CLD 23 MLTPL
WNF5010[3] [5] CLD 23 MLTPL
WNF5010-8040-400[2] [4] 8" x 40" CLD 23 MLTPL
WNF5010-8040-440[2] [4] 8" x 40" CLD 23 MLTPL
WNF8010[3] [5] CLD 23 MLTPL
WNF8010-8040-400[2] [4] 8" x 40" CLD 23 MLTPL
WNF8020[3] [5] CLD 23 MLTPL
WNF8020-8040-400[2] [4] 8" x 40" CLD 23 MLTPL
WNF9010[3] [5] CLD 23 MLTPL
WNF9010-8040-370-P80[2] [4] 8" x 40" CLD 23 MLTPL
WNF9010-8040-400[2] [4] 8" x 40" CLD 23 MLTPL
WNF9010-P80[3] [5] CLD 23 MLTPL

[2] Filter elements are certified for the following minimum daily (24 hour) permeate
    generation volumes for use in public water treatment facilities:
    BW-8040-400-LP: 9350 gallons
    BW-8040-440-LP: 10285 gallons
    BW-8040-400-FR: 9350 gallons
    BW-8040-400-ULP: 9350 gallons
    BW-8040-440-ULP: 10752 gallons
    BW-8040-400-XFR: 9350 gallons
    BW-8040-440-XLP: 10285 gallons
    BW-8040-400-ME: 8925 gallons
    BW-8040-440-ME: 9817 gallons
    SW-8040-HP70: 7480 gallons
    SW-8040-440-HP70: 8228 gallons
    SW-8040-400-HR: 6375 gallons
    SW-8040-440-HR: 7012 gallons
    SW-8040-400-HF: 7650 gallons
    SW-8040-440-HF: 8415 gallons
    SW-8040-400-XHR: 5100 gallons
    SW-8040-440-XHR: 5610 gallons
    SW-8040-400-XHF: 6993 gallons
    SW-8040-440-XHF: 8376 gallons
    SW-8040-370-HP120: 10200 gallons
    SCW-8040-400-ULP: 9350 gallons
    SCW-8040-440-ULP: 10752 gallons
    BW-4040-FR: 2400 gallons
    BW-4040-LP: 2400 gallons
    BW-4040-ULP: 2400 gallons
    SCW-4040-ULP: 2400 gallons
    SW-4040-HF: 1624 gallons
    SW-4040-HP70: 1588 gallons
    SW-4040-HR: 1353 gallons
    SW-4040-XHF: 1485 gallons
    SW-4040-XHR: 1083 gallons
    WNF5010-8040-400: 10625 gallons
    WNF5010-8040-440: 11687 gallons
    WNF8010-8040-400: 11900 gallons
    WNF8020-8040-400: 9350 gallons
    WNF9010-8040-370-P80: 5440 gallons
    WNF9010-8040-400: 6375 gallons
    HP200-8040-270: 5780 gallons
    WH-400-PRO: 9775 gallons
    WH-400-PRO1: 9775 gallons
    WH-400-PRO2: 9775 gallons
    WH-400-PRO3: 9775 gallons
[3] Membranes are certified to a maximum static surface area to volume ratio of 0.13 liters
    (L) per square meter of membrane surface area, and the following minimum daily (24 hour)
    permeate generation volumes for use in public water treatment facilities:
    BW-FR: 954 liters per square meter of membrane
    BW-LP: 954 liters per square meter of membrane
    BW-ME: 910 liters per square meter of membrane
    BW-ULP: 954 liters per square meter of membrane
    BW-XFR: 954 liters per square meter of membrane
    BW-XLP: 954 liters per square meter of membrane
    SCW-ULP: 954 liters per square meter of membrane
    SW-HF: 780 liters per square meter of membrane
    SW-HP70: 763 liters per square meter of membrane
    SW-HP120: 1125 liters per square meter of membrane
    SW-HR: 650 liters per square meter of membrane
    SW-XHF: 713 liters per square meter of membrane
    SW-XHR: 520 liters per square meter of membrane
    WNF5010: 1084 liters square meter of membrane
    WNF8010: 1214 liters square meter of membrane
    WNF8020: 954 liters per square meter of membrane
    WNF9010: 650 liters per square meter of membrane
    WNF9010-P80: 600 liters per square meter of membrane
    HP200: 873 liters per square meter of membrane
    WH-PRO: 997 liters per square meter of membrane
    WH-PRO1: 997 liters per square meter of membrane
    WH-PRO2: 997 liters per square meter of membrane
    WH-PRO3: 997 liters per square meter of membrane
[4] The following filter elements require a pre-service flush at a flow rate of 12 gallons
    per minute (12 gpm) for 2 hours using deionized water:
    BW-8040-400-LP
    BW-8040-440-LP
    BW-8040-400-FR
    BW-8040-400-ULP
    BW-8040-440-ULP
    BW-8040-400-XFR
    BW-8040-440-XLP
    BW-8040-400-ME
    BW-8040-440-ME
    SW-8040-HP70
    SW-8040-440-HP70
    SW-8040-400-HR
    SW-8040-440-HR
    SW-8040-400-HF
    SW-8040-440-HF
    SW-8040-400-XHR
    SW-8040-440-XHR
    SW-8040-400-XHF
    SW-8040-440-XHF
    SW-8040-370-HP120
    SCW-8040-400-ULP
    SCW-8040-440-ULP
    "BW-4040-FR
    BW-4040-LP
    BW-4040-ULP
    SCW-4040-ULP
    SW-4040-HF
    SW-4040-HP70
    SW-4040-HR
    SW-4040-XHF
     SW-4040-XHR
    WNF5010-8040-400
    WNF5010-8040-440
    WNF8010-8040-400
    WNF8020-8040-400
    WNF9010-8040-370-P80
    WNF9010-8040-400
    HP200-8040-270
    WH-400-PRO
    WH-400-PRO1
    WH-400-PRO2
    WH-400-PRO3
[5] The following membranes require a pre-service immersion in ambient deionized water for
    46 minutes, followed by a deonized water flush on both sides of the membrane for 30
    minutes:
    BW-FR
    BW-LP
    BW-ME
    BW-ULP
    BW-XFR
    BW-XLP
    SCW-ULP
    SW-HF
    SW-HP70
    SW-HP120
    SW-HR
    SW-XHF
    SW-XHR
    WNF5010
    WNF8010
    WNF8020
    WNF9010
    WNF9010-P80"								
    HP200
    WH-PRO
    WH-PRO1
    WH-PRO2
    WH-PRO3

Ultrafiltration Devices[1]
UF-0685-50 160 x 2418 mm CLD 23 MLTPL
UF-0685-65 160 x 2418 mm CLD 23 MLTPL
UF-0770 180 x 1919 mm CLD 23 MLTPL
UF-0860 225 x 1860 mm CLD 23 MLTPL
UF-0880 225 x 2360 mm CLD 23 MLTPL
UF-0880X 225 x 2360 mm CLD 23 MLTPL

[1] Products require a pre-service flush at a flow rate of twelve (12) gallons per minute
    (gpm) for two (2) hours using de-ionized water.
    UF-0860 is certified for a minimum daily flow of 42,000 liters for use in public water
    treatment facilities.
    UF-0880 is certified for a minimum daily flow of 65,000 liters for use in public water
    treatment facilities.
    UF-0880X is certified for a minimum daily flow of 67,000 liters for use in public water
    treatment facilities.
    UF-0770 is certified for a minimum daily flow of 47,000 liters for use in public water
    treatment facilities.
    UF-0685-50 is certified for a minimum daily flow of 42,000 liters for use in public
    water treatment facilities.
    UF-0685-65 is certified for a minimum daily flow of 55,000 liters for use in public
    water treatment facilities.



 
Watts Aqualock 
815 Chestnut Street
North Andover, MA 01845 
United States 
888-500-0056 
978-689-6165


Facility : Zhejiang, China

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Valves[G]
Garden valve with Drop Ear / LF4751-1014D (EDP#0472081) 1/2"pushfitx3/4"MHT CLD 23 MLTPL
Garden valve with Drop Ear / LF4751-1414D (EDP#0472082) 3/4"pushfitx3/4"MHT CLD 23 MLTPL
No Kink Hose Bibb Quarter Turn / LF4751-1014HB (EDP#0472083) 1/2"pushfitx3/4"MHT CLD 23 MLTPL
No Kink Hose Bibb Quarter Turn / LF4751-1414HB (EDP#0472084) 3/4"pushfitx3/4"MHT CLD 23 MLTPL
Washing Machine Angle Valve / LF4751-1014A (EDP#0472080) 1/2"pushfitx3/4"MHT CLD 23 MLTPL
Washing Machine Straight Valve / LF4751-1014S (EDP#0472079) 1/2"pushfitx3/4"MHT CLD 23 MLTPL

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



 
Watts Heating and Hot Water Solutions LLC, DBA Lync by Watts 
425 West Everman Parkway
Fort Worth, TX 76134 
United States 
817-335-9531


Facility : San Antonio, TX

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Filtration Devices/Components
LCH-150 [1] CLD 23 MLTPL

[1] Certified for a minimum flow rate of 228,000 Liters per day.
    This product has not been tested or evaluated for point-of-entry (POE) use.



 
Watts Regulator Co. 
815 Chestnut Street
North Andover, MA 01845 
United States 
800-659-8400 
978-689-6066
Visit this company's website


Facility : Pingtung, Taiwan

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Filtration Devices/Components
Big Bubba BBH-150[1] [2] CLD 23 MLTPL
Jumbo Cartridge Filter Housing[1] [2] CLD 23 MLTPL
Watts Pure Water PWWJCHSG (7100301)[1] [2] CLD 23 MLTPL

[1] This product has not been tested or evaluated for point-of-entry (POE) use.
[2] Certified for a minimum flow rate of 228,000 liters per day.



 
Watts Regulator Company 
815 Chestnut Street
North Andover, MA 01845 
United States 
978-689-6249


Facility : Woodland, CA

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Backflow Preventers [G]
(1)-DBF-(2)-(3)(4)(5)-(6)(7)-M2[1] 2" - 48" CLD 23 MLTPL
757-X-YY-ZZ-TT[2] 2 1/2" - 10" CLD 23 MLTPL
757a-X-YY-ZZ-TT[2] 2 1/2" - 10" CLD 23 MLTPL
767-X-YY-ZZ-TT[2] 2 1/2" - 10" CLD 23 MLTPL
767a-X-YY-ZZ-TT[2] 2 1/2" - 10" CLD 23 MLTPL
957-X-YY-ZZ-TT[2] 2 1/2" - 10" CLD 23 MLTPL
957a-X-YY-ZZ-TT[2] 2 1/2" - 10" CLD 23 MLTPL
967-X-YY-ZZ-TT[2] 2 1/2" - 10" CLD 23 MLTPL
967a-X-YY-ZZ-TT[2] 2 1/2" - 10" CLD 23 MLTPL

[1] (1) Size: 02-48
    (2) Body style
        03 - Lug
        04 - Wafer
    (3) Body material
        1 - Cast iron
        2 - Ductile iron
    (4) Disc material
        2 - Aluminum bronze
        3 - SS 316
    (5) Shaft material
        1 - Stainless steel 416
        2 - Stainless steel 316
        3 - Stainless steel 431
    (6) Seat material
        1 - EPDM (Canada)
        4 - EPDM (US)
    (7) Operator
        0 - No handle
        5 - Standard handle (10-position)
        G - Gear operator 
        P - Positioning/locking kit with handle
[2] X - Valve pattern            
        Blank - Straight                        
        N - N pattern                           
        Z - Z pattern
    YY - Backflow shutoff designation where 2 per units may be mixed like NRS x PIV  
         BFG  - Butterfly valve
         DNRS - Domestic non-rising stem gate 
         DOSY - Domestic outside stem and yoke gate  
         DPIV - Domestic post indicator gate                    
         NRS  - Non-rising stem gate
         OSY  - Outside stem and yoke gate                      
         PIV  - Post indicator gate
         QT   - Quarter turn ball valve
    ZZ - Inlet and outlet connections                   
         Blank - Flange by flange 
         FxG   - Flange by groove
         GxF   - Groove by flange
         GxG   - Groove by groove
    TT - Strainer options
         Blank - No strainer
         S     - 77F-DI-FDA-125 strainer
         S-SS  - Stainless strainer 8000F
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



 
Watts Regulator Company 
815 Chestnut Street
North Andover, MA 01845 
United States 
978-689-6165
Visit this company's website


Facility : # 3 China

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Valves [G]
LFTWHG2-(XX)-(YY)-(Z)[1] 3/4" D. HOT MLTPL

[1] -XX	Water Line Connection Type								
    FS	Female Sweat								
    FT	Female Pipe Thread								
    PC	Press Connection								
    -YY	Valve Type								
    H	Hot Water Valve								
    C	Cold Water Valve								
    HC	Hot and Cold Valve shipped in one box								
    HCD	Hot Valve (red handle), Recirc. Valve (orange handle) and Cold Valve (blue
    handle)								
    -Z									
    Blank	Watts labeled								
    ABC	OEM Customer Labeled	
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



Facility : # 4 Zhejiang, China

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Backflow Preventers[5] [G]
(XX)007-YY-ZZ 1/2" CLD 23 MLTPL
(XX)007M2-YY-ZZ 1 1/4" - 1 1/2" CLD 23 MLTPL
(XX)007M3-YY-ZZ 3/4" CLD 23 MLTPL
(XX)009-WW-YY-ZZ 1/2" CLD 23 MLTPL
(XX)009M2-WW-YY-ZZ 1" - 2" CLD 23 MLTPL
(XX)009M3-WW-YY-ZZ 3/4" CLD 23 MLTPL
LFU007-YY-ZZ 1/2" CLD 23 MLTPL
LFU007M1-YY-ZZ 1" - 2" CLD 23 MLTPL
LFU007M2-YY-ZZ 3/4" - 1 1/2" CLD 23 MLTPL
LFU009-YY-ZZ 1/2" CLD 23 MLTPL
LFU009M2-YY-ZZ 3/4" - 2" CLD 23 MLTPL

[5]         WW	- Blank - Standard Unit			
    	PC - Poly Coated			
    				
    XX	LF - Lead free			
    	SS - Stainless steel			
    				
    YY	LF - Supplied without shut-off valves			
    	QT - Supplied with shut-off valves			
    	LBV - Supplied without shut-off valves			
    	UL - Fire application approved			
    	CULUS - Fire application approved			
    				
    ZZ	Any combination of the following:			
    	AG - Air gap			
    	Blank - Standard unit			
    	BC - Brass cap			
    	CT (or C & T) - Cap and teather			
    	FP - Gear Operated Ball Valve			
    	FS - Flood Sensor			
    	FZ - Freeze Sensor			
    	LH - Locking handles			
    	S - Strainer (LF777SI)			
    	SH - Stainless handles			
    	CULUS - Fire application approved			
    	Z3 - Stainless handles and nuts			
    	Z4 - Non-removable handles			
    	Z5 - Special dipped test cock adapter
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

Valves [G]
405 NRS F x F 2 1/2" x 10" CLD 23 MLTPL
405 NRS F x G 2 1/2" x 10" CLD 23 MLTPL
LF 25AUB (X)[1] 1/2", 3/4", 1" CLD 23 MLTPL
LF-FBV[2] 1/4" - 2" CLD 23 MLTPL
LF-FBV-4 1/4" - 3" CLD 23 MLTPL
LF-FBV-4 1/4" - 3" CLD 23 MLTPL
LF-FBV-E[2] 1/4" - 2" CLD 23 MLTPL
LF-FBV-E-IOT[2] 1/2" - 3/4" CLD 23 MLTPL
LF-FBV-E-LH[2] 1/2" - 2" CLD 23 MLTPL
LF-FBV-LH[2] 1/2" - 2" CLD 23 MLTPL
LF-FBV-M[2] 1/2" - 3/4" CLD 23 MLTPL
LF-IS6301 1/2" - 1" CLD 23 MLTPL
LF-IT6300 1/2" - 1" CLD 23 MLTPL
LF-N45(X)[3] 1/2", 3/4", 1" CLD 23 MLTPL
LF-N55(X)[3] 1/2", 3/4", 1" CLD 23 MLTPL
LF-WBV-3 1/8" - 4" CLD 23 MLTPL
LF-WBVC-M1 1/2" - 1" CLD 23 MLTPL
LF-WBVS-3 3/8" - 3" CLD 23 MLTPL
LFB6090-SS 1/4" - 4" CLD 23 MLTPL
LFB6091-SS 3/8" - 3" CLD 23 MLTPL
LFBRVM1-(1)x(2)x(3)-(4)[4] 3/4" CLD 23 MLTPL
LFIT6300 with Drain 1/2" - 1" CLD 23 MLTPL

[1] These valves are available with the following options, (indicated by X in tradename): 
        DU    - Double Union Connection
        S     - Solder Pipe Connection
        S-DU  - Double union solder inlet & outlet connections
        Z3    - Sealed Cage/Corrosion Resistant Screws
[2] Trade Names may include the following suffixes:
    TH - Tee Handle
    TC - Test Cock
    SH - Steel Handle
[3] (X) May be any combination of the following letters: 
        B      - Bypass Feature
        DU     - Double Union Connection
        U      - Single Union Connection
        M1     - First Model
[4] (1) Valve body end connection:
        P - Pex
        S - Solder
        T - Threaded 
    (2) Valve adapter end connection: 
        P - Pex
        S - Solder
        T - Threaded 
    (3) Relief end connection:
        B - Barb
        C - Compression
        P - Pex
    (4) Relief pressure set point in psi (80 or 125)
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



Facility : Franklin, NH

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Backflow Preventers [G]
(XX)007-YY-ZZ[1] 1/2" CLD 23 MLTPL
(XX)007M1-YY-ZZ[1] 1" - 2" CLD 23 MLTPL
(XX)007M2-YY-ZZ[1] 1 1/4" - 1 1/2" CLD 23 MLTPL
(XX)007M3-YY-ZZ[1] 3/4" CLD 23 MLTPL
(XX)009-WW-YY-ZZ[1] 1/2" CLD 23 MLTPL
(XX)009M2-WW-YY-ZZ[1] 1" - 2" CLD 23 MLTPL
(XX)009M3-WW-YY-ZZ[1] 3/4" CLD 23 MLTPL
LF iDroset CSD 1/2" - 1" C. HOT MLTPL
LF07SU2-2 1" - 2" CLD 23 MLTPL
LF07SU2-3 1" - 2" CLD 23 MLTPL
LF07SU4-5 1" - 2" CLD 23 MLTPL
LF709[2] 2 1/2" - 10" CLD 23 MLTPL
LF719[3] 1/2" - 2" CLD 23 MLTPL
LF850(1)(2)[4] 2 1/2" - 10" CLD 23 MLTPL
LF856(1)(2)(3)[5] 2 1/2" - 10" CLD 23 MLTPL
LF860(1)(2)[4] 2 1/2" - 10" CLD 23 MLTPL
LF866(1)(2)(3)[5] 2 1/2" - 10" CLD 23 MLTPL
LF876-W[1] [2] [3] [5] 4" - 10" CLD 23 MLTPL
LF876-WZ[1] [2] [3] [5] 4" - 10" CLD 23 MLTPL
LF876V (1)(2)(3)[5] 2 1/2" - 10" CLD 23 MLTPL
LF886-W[1] [2] [3] [5] 4" - 10" CLD 23 MLTPL
LF886-WZ[1] [2] [3] [5] 4" - 10" CLD 23 MLTPL
LF886V (1)(2)(3)[5] 2 1/2" - 10" CLD 23 MLTPL
LF909[2] 2 1/2" - 6" CLD 23 MLTPL
LF909-X[6] 3/4" - 1" CLD 23 MLTPL
LF909M1[2] 8" - 10" CLD 23 MLTPL
LF909M1-X[6] 1 1/4" - 2" CLD 23 MLTPL
LF919[3] 1/2" - 2" CLD 23 MLTPL
LFB6080G2-SS 1/2" - 4" C. HOT MLTPL
LFB6081G2-SS 1/2" - 3" C. HOT MLTPL
LFU007-YY-ZZ[1] 1/2" CLD 23 MLTPL
LFU007M1-YY-ZZ[1] 1" - 2" CLD 23 MLTPL
LFU007M2-YY-ZZ[1] 3/4" - 1 1/2" CLD 23 MLTPL
LFU009-YY-ZZ[1] 1/2" CLD 23 MLTPL
LFU009M2-YY-ZZ[1] 3/4" - 2" CLD 23 MLTPL

[1] WW - Blank - Standard Unit
         PC    - Poly Coated
    XX - LF - Lead free
         SS - Stainless steel
    YY - LF    - Supplied without shut-off valves
         QT    - Supplied with shut-off valves
         LBV   - Supplied without shut-off valves
         UL    - Fire application approved
         CULUS - Fire application approved
    ZZ - Any combination of the following:
         AG    - Air gap
         Blank - Standard unit
         BC    - Brass cap
         CT (or C & T) - Cap and teather
         FP    - Gear Operated Ball Valve
         FS    - Flood Sensor
         FZ    - Freeze Sensor
         LH    - Locking handles
         S     - Strainer (LF777SI) 
         SH    - Stainless handles
         CULUS - Fire application approved
         Z3    - Stainless handles and nuts
         Z4    - Non-removable handles
         Z5    - Special dipped test cock adapter
[2] Suffixes may consist of the following:
    LF   - Assembly ships without isolation shut-off valves
    NRS  - Non-rising stem
    DNRS - Domestic non-rising stem
    OSY  - Outside stem and yoke
    DOSY - Domestic outside stem and yoke
    -S   - FDA model 77F-DI-FDA-125
    AG   - Air gap
[3] Products may include one or more of the following prefixes or suffixes:
    S - Lead Free Strainer
    LF (as suffix) - Less fitting
    LF (as prefix) - Lead free
    QT - Quarter turn ball valve
    Options for non-wetted:
    AG    - Air gap
    C & T - Cap and tether test cock covers
    LH    - Locking handled ball valves
    SH    - Stainless handled ball valves
[4] Suffixes may consist of:
    (1) Isolation Shut-off Valve Options: 
        LG   - Assembly ships without isolation shut-off valves 
        NRS  - Non-rising stem 
        DNRS - Domestic mon-rising stem 
        OSY  - Outside stem and yoke 
        DOSY - Domestic outside stem & yoke 
    (2) Installation Option:
        LH - Test cocks mounted for right-to-left flow installation
[5] (1) Isolation Shut-off Valve Options 
        LG   - Assembly Ships Without Isolation Shut-off Valves 
        NRS  - Non-Rising Stem 
        DNRS - Domestic Non-Rising Stem 
        OSY  - Outside Stem & Yoke 
        DOSY - Domestic Outside Stem & Yoke 
    (2) Meter in Bypass Line 
        GPM - Gallon Totalizing Meter 
        CFM - Cubic-Feet Totalizing Meter 
        LM  - Assembly Ships With Straight Plastic Pipe for Installation of Customer's 
              Meter 
    (3) Installation Option 
        LH - Test Cocks & Bypass Line mounted for right-to-left flow installation
[6] (X) - Any combination of the following, appearing in the order below:
          AG - Air gap
          HW - Stainless steel check modules for harsh water conditions
          LF - Without shut-off valves
          QT - Quarter turn ball valves
          S  - Strainer
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

Valves [G]
(D) (LF) 25AUB (X)[7] 1/2" - 2" CLD 23 MLTPL
122-ABNF1 1/2" C. HOT MLTPL
LF CSM-61-M1-S 1/2" - 1" D. HOT MLTPL
LF CSM-61-M2-S 1 1/4" - 2" D. HOT MLTPL
LF-223[8] 1/2" - 2" C. HOT MLTPL
LF-223-U[8] 1/2" - 2" C. HOT MLTPL
LF-N223[8] 2 1/2" - 3" C. HOT MLTPL
LF-N223-M1[8] 3" C. HOT MLTPL
LF-N223-M2[8] 2 1/2" C. HOT MLTPL
LF-N223F-M2[8] 3" C. HOT MLTPL
LF-N45(X)[9] 1/2" - 2" CLD 23 MLTPL
LF-N55(X)[9] 1/2" - 2" CLD 23 MLTPL
LF-N55XL 3/4", 1" CLD 23 MLTPL
LF-N55XL-DU 3/4", 1" CLD 23 MLTPL
LF1170CM2-(X)[12] 1/2" - 1" C. HOT MLTPL
LF1170M2-(X)[12] 1/2" -1" C. HOT MLTPL
LFL1170M2-(X)[12] 1/2" - 1" C. HOT MLTPL
LFMMVM1-(X)[12] 1/2" -1" C. HOT MLTPL
LFRC105-CEF x CEF 3/4" - 1" CLD 23 MLTPL
LFRC105-PEX x PEX 3/4" - 1" CLD 23 MLTPL
LFRC105-THD x U 3/4" - 1" CLD 23 MLTPL
Series LF-U5[11] 1/2" - 2" CLD 23 MLTPL

[7] (D) Domestic manufacture
    (X) May be any combination of the following:
        CEF   - Cold Expansion Fittings
        CPVC  - CPVC tubing connection
        DU    - Double union connection
        G     - Gauge tapping
        GG    - Gauge tapped with gauge
        HP    - High pressure
        LP    - Low pressure
        M3-Z6 - Water meter connections
        PEX   - PEX tubing connection
        PR    - Press
        QC    - Quick Connect
        S     - Solder pipe connection
        SC    - Sealed cage
        S-DU  - Double union solder inlet & outlet connections
        STD   - Standard model
        Z3    - Sealed cage/corrosion resistant screws
        Z-5   -  28 PSI Setting
        Z7    - 400 psi
        Z-9   - 20 PSI Setting
        Z10   - No union connection
        Z-13  - 50 PSI Setting-Standard Setting
[8] The trade names may also indicate one or more of the following options, in any order:
    B      - Built-in bypass
    BS     - British thread
    G      - Gauge tapping
    GG     - Gauge tapped with gauge
    HP     - High pressure
    LP     - Low pressure
    S      - Strainer attached
    STD    - Standard
    Z3     - Sealed cage/corrosion resistant screws
    Z8     - Long adjusting screw
[9] (X) May be any combination of the following:
        B      - Bypass feature
        CEF    - Cold Expansion Fittings
        CPVC   - CPVC tubing connection
        DU     - Double union connection
        EZ     - Easilty adjustable w/visible setting indicator
        G      - Gauge tapping
        HP     - High pressure
        LP     - Low pressure
        M1     - First model
        PEX    - PEX tubing connection
        PR     - Press
        S      - Solder connection
        SBRASS - Sweat with brass tailpiece 
        THD    - Standard threaded pipe connection, when used in combination 
                 with another connection type
        U      - Single union connection
        W      - Special body end threads
        Z6     - Water meter connections
        070    - Pre-Set 70 PSI
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.
[10] Suffixes may consist of the following:
     0-125    - Pressure rating
     12 WO-El - Special customer
     QD       - Quick disconnect
     RK       - Repair kit
     V        - Viton O-Ring
     Z(X)     - Special customer
[11] B     - Bypass feature
     G     - Guage tapping
     GG    - Guage tapped with guage
     HP    - High pressure
     LP    - Low pressure
     M3-Z6 - Water meter connections (3/4" & 1")
     S     - Solder pipe connection
     SC    - Sealed cage
     Z3    - Sealed cage/corrosion resistant screws
     Z9    - NPT Male thread union inlet (3/4")
[12] (X) Represents the following:
         CEF  - Cold Expansion Fittings
         CPVC - CPVC Ends
         PEX  - PEX Ends
         QC   - Quick Connects Ends
         UT   - FNPT Ends
         US   - C12200 Sweat (Solder) Ends
[14] (x) Connection options
     FLxFL - Flange by flange
     MJxFL - Mechanical joint by flange
     MJxMJ - Mechanical joint by mechanical joint

[13] The model numbers are:
     1" PAP-M025-UNS
     3/4” PAP-S020-UNS
     1/2” PAP-S015-UNS


Facility : Spindale, NC

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Backflow Preventers [G]
LF7R[1] 1/2" - 1" C. HOT MLTPL

[1] Two suffix codes, denoting the connections, follow the LF7R. 		
    2   - NPTF; female pipe connection [not a union] (1/2", 3/4", 1") 		
    3   - NPTM; male pipe connection [not a union] (3/4")		
    5   - Meter thread male pipe connection [not a union] (1")		
    U2  - NPTF female union pipe connection (1/2", 3/4", 1") 		
    U2L - NPTF; female union pipe connection (1/2", 3/4", 1") with a Longer Lay Length		
    U3  - NPTM; male union pipe connection (3/4") 		
    U4  - Meter thread female union pipe connection (3/4")		
    10  - Meter thread union connection (1")
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

Valves [G]
LF1KB27 1/2" CLD 23 MLTPL
LF1KBZ6 1/8" CLD 23 MLTPL
LF1KBZ7 1/8" CLD 23 MLTPL
LF1KBZ8 1/4" CLD 23 MLTPL
LF1KBZ9 1/4" CLD 23 MLTPL
LF1KCL1 3/4" CLD 23 MLTPL
LF1KCL2 3/4" CLD 23 MLTPL
LF1KCL3 1/2" CLD 23 MLTPL
LF1KCL4 1/2" CLD 23 MLTPL
LF263A-X-YY[2] 1/4" - 1/2" CLD 23 MLTPL
LF26A-X-YY[2] 1/8" - 1/2" CLD 23 MLTPL
LFTWHG2-(XX)-(YY)-RV-(Z)[3] 3/4" D. HOT MLTPL

[2] SS - Stainless Steel
    LF - Lead free brass 
    X  - Options
         Blank - Standard model 
         X     - Slotted adjusting screw 
         V     - Viton elastomers 
         RC    - ROHS compliant 
         P     - Stainless steel seat and hex head adjusting screw 
         G     - Pressure gage 
         ISO   - British threaded ends 
         Z     - Customer special 
    YY - Options Pressure ratings
[3] XX - Water Line Connection Type
         C     - Cold Water Valve
         FS    - Female Sweat
         FT    - Female Pipe Thread
         FT-ST - Female Pipe Thread with swivel tee connection
         H     - Hot Water Valve
         HC    - Hot and Cold Valve shipped in one box
         HCD   - Hot Valve (red handle), Recirc. Valve (orange handle) and Cold Valve 
                 (blue handle)
         PC    - Press Connection
         YY    - Valve Type
    Z - Label type
        ABC   - OEM Customer Labeled
        Blank - Watts labeled
[4] Suffixes may consist of the following:
    0-125    - Pressure rating
    12 WO-El - Special customer
    QD       - Quick disconnect
    RK       - Repair kit
    V        - Viton O-Ring
    Z(X)     - Special customer
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



Facility : St Pauls, NC

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Valves [G]
(1)-BF-(2)-(3)(4)(5)-(6)(7)-M2[1] 2" - 48" CLD 23 MLTPL
(1)-DBF-(2)-(3)(4)(5)-(6)(7)-M2[1] 2" - 48" CLD 23 MLTPL
LFIS100VL 1" C. HOT MLTPL
LFIS150 (81020206) 1 1/2" C. HOT MLTPL
LFIS150VL 1 1/2" C. HOT MLTPL
LFIS200 (81020207) 2" C. HOT MLTPL
LFIS200VL 2" C. HOT MLTPL
LFIS75VL 3/4"" C. HOT MLTPL

[1] (1) Size
        02 - 48
    (2) Body style
        03 - Lug
        04 - Wafer
    (3) Body material
        1  - Cast iron
        2  - Ductile iron
    (4) Disc material
        2  - Aluminum bronze
        3  - SS 316
    (5) Shaft material
        1  - Stainless steel 416
        2  - Stainless steel 316
        3  - Stainless steel 431
    (6) Seat material
        1  - EPDM (Canada)
        2  - EPDM (US)
    (7) Operator
        0  - No handle
        5  - Standard handle (10-position)
        G  - Gear operator
        P  - Positioning/locking kit with handle
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



Facility : Ningbo, China

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Backflow Preventers[1] [G]
LF850 1/2" - 2" CLD 23 MLTPL
LF850U 1/2" - 2" CLD 23 MLTPL
LF860 1/2" - 2" CLD 23 MLTPL
LF860U 1/2" - 2" CLD 23 MLTPL

[1] Product may have box stickers or temporary tags with the following configuration
    descriptions. 
    LF850 / LF850U: 
    QT - Quarter Turn Ball Valve 
    DC - Double Check Assembly 
    LF860 / LF860U: 
    QT - Quarter Turn Ball Valve 
    RP - Reduced Pressure Assembly 
    RPZ - Reduced Pressure Zone
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

Strainer[2] [G]
LF777 SI 3/8" - 3" CLD 23 MLTPL
LFS777 SI 1/2" - 2" CLD 23 MLTPL

[2] Products may bear -PART to indicate bulk packaging.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



Facility : Tianjin City, China

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Valves[1] [G]
(1)-BF-(2)-(3)-(4)-(5)-(6)-(7)-M2 2" - 48" CLD 23 MLTPL
(1)-DBF-(2)-(3)-(4)-(5)-(6)-(7)-M2 2" - 48" CLD 23 MLTPL

[1] (1) Size: 02 - 48
    (2) Body style
        03 - Lug
        04 - Wafer
    (3) Body material
        1 - Cast iron
        2 - Ductile iron
    (4) Disc material
        2 - Aluminum bronze
        3 - SS 316
    (5) Shaft material
        1 - Stainless steel 416
        2 - Stainless steel 316
        3 - Stainless steel 431
    (6) Seat material
        1 - EPDM (Canada)
        2 - EPDM (US)
    (7) Operator
        0 - No handle
        5 - Standard handle (10-position)
        G - Gear operator
        P - Positioning/locking kit with handle
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



Facility : Nogales, Sonara, Mexico

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Valves [G]
LF-FBV[2] 1/4" - 2" CLD 23 MLTPL
LF-FBV-3CM1-(X)[1] 1/4" - 4" CLD 23 MLTPL
LF-FBV-4 1/4" - 3" CLD 23 MLTPL
LF-FBV-E[2] 1/4" - 2" CLD 23 MLTPL
LF-FBV-E-IOT[2] 1/2" - 3/4" CLD 23 MLTPL
LF-FBV-E-LH[2] 1/2" - 2" CLD 23 MLTPL
LF-FBV-LH[2] 1/2" - 2" CLD 23 MLTPL
LF-FBV-M[2] 1/2" - 3/4" CLD 23 MLTPL
LF-FBVS-3C-(X)[1] 1 1/4" - 1 1/2" CLD 23 MLTPL
LF-FBVS-4 1/2" - 3" CLD 23 MLTPL
LFFBV-3C-X[1] 1/2" - 2" CLD 23 MLTPL
LFFBV-4 M X F 1/4" CLD 23 MLTPL
LFFBV-4 M X F 1/4" CLD 23 MLTPL
LFFBVS-3CM1-(X)[1] 1/2" - 3" CLD 23 MLTPL
LFFBVS-3CM1-(X)[1] 1/2" - 3" CLD 23 MLTPL

[1] (X) - Suffix may include 	
    TH - Tee Handle 	
    CC - Cap and Chain	
    SS - Stainless Steel Ball and Stem 	
    QC - Quick Connect 	
    LH - Locking Handle	
    LLHK - Locking Lever Handle Kit
[2] Trade names may include the following suffixes:	
    TH - Tee Handle	
    TC: -Test Cock
    SH - Steel Handle
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



Facility : Bac Ninh Province, Vietnam

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Backflow Preventers[1] [G]
LF850 1/2" - 2" CLD 23 MLTPL
LF850U 1/2" - 2" CLD 23 MLTPL
LF860 1/2" - 2" CLD 23 MLTPL
LF860U 1/2" - 2" CLD 23 MLTPL

[1] Product may have box stickers or temporary tags with the following configuration
    descriptions. 						
    LF850 / LF850U: 						
    QT - Quarter Turn Ball Valve 						
    DC - Double Check Assembly 						
    LF860 / LF860U: 						
    QT - Quarter Turn Ball Valve 						
    RP - Reduced Pressure Assembly 						
    RPZ - Reduced Pressure Zone
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



 
Weflo Valve Co., Ltd. 
No. 789 Chunyang Road
Qingdao National High-tech Industrial  
Development Zone 
Shandong, 26611 
China 
86 532 8790 5016


Facility : Qingdao, Shandong, China

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Couplings
Flexible Coupling/8602[1] 50 mm - 2200 mm D. HOT MLTPL

[1] Certified for EDPM gaskets only.

Fire Hydrants
Dry-Barrel Fire Hydrant/F0733-250 100-150 mm D. HOT MLTPL
Wet-Barrel Fire Hydrant/F1311B-250 100-150 mm D. HOT MLTPL

Valves
Air Release Valve/Fig.9701 1/2 - 1 in D. HOT MLTPL
Basket Strainer/Fig.7105 50-600 mm D. HOT MLTPL
Butterfly Check Valve/Fig.5101-T[2] 350 - 2000 mm D. HOT MLTPL
Center-Line Butterfly Valve/Fig.2103 4" - 24" D. HOT MLTPL
Center-Line Butterfly Valve/Fig.2122 350-2000 mm D. HOT MLTPL
Center-Line Butterfly Valve/Fig.2123 350-2000 mm D. HOT MLTPL
Center-line butterfly valve/Fig.2908 4" - 12" D. HOT MLTPL
Double Eccentric Butterfly Valve/Fig.2106 100-2400 mm D. HOT MLTPL
Double Eccentric Butterfly Valve/Fig.2108 14" - 96" D. HOT MLTPL
Double Orifice Air Release Valve/Fig.9101A[3] 50-200 mm D. HOT MLTPL
Lug Butterfly Valve/Fig.2502[4] 100-600 mm D. HOT MLTPL
Lug Butterfly Valve/Fig.2502-S 100-600 mm D. HOT MLTPL
NRS Resilient Seated Gate Valve./Fig.3243-S[1] 100 - 600 mm D. HOT MLTPL
NRS Resilient Seated Gate valve/Fig.3243[5] 100 - 600 mm D. HOT MLTPL
OS&Y Metal Seated Gate Valve /Fig.3233-S[1] 100 - 600 mm D. HOT MLTPL
OS&Y Resilient Seated Gate valve/Fig.3233[5] 100 - 600 mm D. HOT MLTPL
Swing Check Valve/Fig.5101[1] 4" - 24" D. HOT MLTPL
Wafer Butterfly Valve/Fig.2302[6] 100-600 mm D. HOT MLTPL
Wafer Butterfly Valve/Fig.2302-S 100-600 mm D. HOT MLTPL
Wafer Double Door Check valve/Fig.5306[3] 50-1200 mm D. HOT MLTPL
Y-Strainer/Fig.7101 50-2000 mm D. HOT MLTPL

[1] Certified for EDPM gaskets only.
[2] Certified for EPDM o-rings only.
[3] Certified for EDPM gaskets and seat only.
[4] Certified for EPDM liner and o-rings only.
[5] Certified for PTFE packing only.
[6] Certified for EDPM liner only.



 
Wenling Younio Water Meter Co.,Ltd. 
No. 1039 Jiulong Avenue
Chengxi Street, Wenling 
Zhejiang 317500 
China 
86 576 86966684


Facility : Zhejiang, China

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Water Meters[G]
MULTI JET DRY WATER METER/LXSG-15E5/S/LFN1165mm/190mm) 1/2" CLD 23 MLTPL
MULTI JET DRY WATER METER/LXSG-15E5/S/LFN2165mm/190mm) 1/2" CLD 23 MLTPL
MULTI JET DRY WATER METER/LXSG-20E5/S/LFN1 3/4" CLD 23 MLTPL
MULTI JET DRY WATER METER/LXSG-20E5/S/LFN2 3/4" CLD 23 MLTPL

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
      documentation shipped with the product are Certified.


 
WesTech Engineering, LLC 
3665 South West Temple
Salt Lake City, UT 84115 
United States 
801-265-1000
Visit this company's website


Facility : Freeport, IL

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Filter Underdrain
Concrete Insert [1] CLD 23 MLTPL
Underdrain Nozzle [1] CLD 23 MLTPL

[1] Certified sizes are as follows:
    Concrete Insert - Multiple
    Pan Form - 541 sq. in./sq. ft.
    Underdrain Nozzle - 3014 sq. in./sq. ft.

Water Treatment Devices
Pan Form [1] CLD 23 MLTPL

[1] Certified sizes are as follows:
    Concrete Insert - Multiple
    Pan Form - 541 sq. in./sq. ft.
    Underdrain Nozzle - 3014 sq. in./sq. ft.



Facility : Holiday City, OH

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Filter Underdrain
Multiblock Filter Underdrain [1] CLD 23 PE
Multicrete II Pan Form [2] CLD 23 HDPE

[1] Certified for a minimum flow of 2 gallons/minute/square foot of filter surface area.
[2] Certified for a minimum flow of 1.5 gallons/minute/square foot of filter surface area.



 
Western Led Lighting Corp. 
2020 32 Avenue NE, Unit: E
Calgary 
AB T2E 9A7 
Canada 
1 4037001001


Facility : # 1 China

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Fittings[G]
AGUA BAY BRASS FITTING 1/2" - 2" C. HOT BRASS

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



 
Westfall Manufacturing Company, Inc. 
15 Broad Common Road
Bristol, RI 02809 
United States 
888-928-3747 
401-253-3799
Visit this company's website


Facility : Bristol, RI

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Miscellaneous Process Devices/Components[1]
WESTFALL MODEL 6000 STATIC MIXER 1" - 120"[3] CLD 23 MLTPL

[1] Only products bearing the NSF Mark on the product, product packaging, and/or
    documentation shipped with the product are Certified.
[2] Certified for installation on pipes 1/4" - 300" in diameter.
[3] Certified for installation on pipes 1" - 120" in diameter. Certified product does not
    include ports, injection nozzles or gaskets.



 
Westlake Corporation DBA Westlake Chemicals & Vinyls LLC (Formerly Axiall, LLC) 
(formerly PPG Industries)
11 Stanwix Street  
Suite 1900 
Pittsburgh, PA 15222 
United States 
800-245-2974 
412-515-8098
Visit this company's website


Facility : Burgettstown, PA

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Chemical Feeders[1]
Accu-Tab® Model 2300 Chlorinator[2] N/A CLD 23 MLTPL
Accu-Tab® Model 2600 Chlorinator[2] N/A CLD 23 MLTPL
Accu-Tab® Model 30600 Chlorinator[2] N/A CLD 23 MLTPL
Accu-Tab® Model 3012 Chlorinator[3] N/A CLD 23 MLTPL
Accu-Tab® Model 3075 Chlorinator[2] N/A CLD 23 MLTPL
Accu-Tab® Model 3150 Chlorinator[2] N/A CLD 23 MLTPL
Accu-Tab® Model 3530 Chlorinator[2] N/A CLD 23 MLTPL
Accu-Tab® Model 3550 Chlorinator[2] N/A CLD 23 MLTPL

[1] Certification of this product has been performed to the health effects requirements of
    NSF/ANSI/CAN 61, which assesses the acceptability of potential extractants from the
    chemical feeder when used with the manufacturer's recommended use chemicals.  Any
    modifications including the use of chemicals other than those recommended by the
    manufacturer and chemicals that are not compliant to NSF/ANSI/CAN 60 will void the NSF
    Certification for this feeder.
[2] Certified for a minimum daily flow of 21,800 L.
[3] Product was evaluated and Certified based upon dosing of water at 5ppm
    chlorine residual.  Certified for a minimum daily flow of 27,000 L per day.



Facility : Rock Hill, SC

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Chemical Feeders[1] [2]
Accu-Tab 2075 P [3] CLD 23 MLTPL
Accu-Tab 2150 P [3] CLD 23 MLTPL

[1] Certification of this product has been performed to the health effects requirements of
    NSF/ANSI/CAN 61, which assesses the acceptability of potential extractants from the
    chemical feeder when used with the manufacturer's recommended use chemicals. Any
    modifications including the use of chemicals other than those recommended by the
    manufacturer and chemicals that are not compliant to NSF/ANSI/CAN 60 will void the NSF
    Certification for this feeder.
[2] The product is evaluated and Certified based on dosing water at 10 ppm residual chlorine.
[3] Certified for a minimum flow of 21,800 L/day.



 
Winters Instruments 
121 Railside Road
Toronto, ON M3A 1B2 
Canada 
800-946-8377 
800-946-8377
Visit this company's website


Facility : Anhui, China

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Pressure Gauges[1]
PFQ-LF Series, 4" dial * 1/8" - 1/2" CLD 23 MLTPL

[1] * - with socket, solder, and bourdon tube
    
    Codes:									
    PFQ-LF - 4" (100mm) dial size - 1/4" connection
    Bottom: PFQ700LF, PFQ701LF, PFQ702LF, PFQ703LF, PFQ704LF, PFQ705LF, PFQ706LF, PFQ707LF, 
            PFQ708LF, PFQ709LF, PFQ710LF, PFQ711LF, PFQ712LF, PFQ713LF, PFQ714LF, PFQ715LF, 
            PFQ716LF, PFQ724LF, PFQ725LF, PFQ726LF, PFQ727LF, PFQ728LF, PFQ346LF, PFQ347LF, 
            PFQ729LF, PFQ261LF
    Back:   PFQ730LF, PFQ731LF, PFQ732LF, PFQ733LF, PFQ734LF, PFQ735LF, PFQ736LF, PFQ737LF, 
            PFQ738LF, PFQ739LF, PFQ740LF, PFQ741LF, PFQ742LF, PFQ743LF, PFQ744LF, PFQ745LF, 
            PFQ746LF, PFQ192LF, PFQ241LF, PFQ242LF, PFQ243LF, PFQ244LF, PFQ246LF, PFQ247LF, 
            PFQ360LF, PFQ361LF
    Optional Suffix:
            A1  - Accuracy 1% 
            R1  - psi 
            R2  - kPa
            R3  - kg/cm2 
            R4  - cm of H2O 
            R5  - ft of H2O
            R6  - in of Hg 
            R7  - mm of Hg 
            R8  - in of H2O
            R9  - oz/in2 
            R10 - atmosphere 
            R11 - bar
            R12 - mbar 
            R13 - MPa 
            R14 - mH2O
            R15 - mmH2O
            R16 - Pa 
            T1  - BSP(G) 
            T2  - BSPT(R)
    
    PFQ-LF - 4" (100mm) dial size - 1/2" connection
    Bottom: PFQ1234LF, PFQ1235LF, PFQ1236LF, PFQ1237LF, PFQ1238LF, PFQ1239LF, PFQ1240LF, 
            PFQ1241LF, PFQ1242LF, PFQ1243LF, PFQ1244LF, PFQ1245LF, PFQ1246LF, PFQ1247LF, 
            PFQ1248LF, PFQ1249LF, PFQ1250LF, PFQ717LF, PFQ718LF, PFQ719LF, PFQ720LF, 
            PFQ721LF, PFQ784LF, PFQ786LF, PFQ722LF, PFQ723LF
    Back:   PFQ1285LF, PFQ1286LF, PFQ1287LF, PFQ1288LF, PFQ1289LF, PFQ1290LF, PFQ1291LF, 
            PFQ1292LF, PFQ1293LF, PFQ1294LF, PFQ1295LF, PFQ1296LF, PFQ1298LF, PFQ1524LF, 
            PFQ1525LF, PFQ1526LF, PFQ1527LF, PFQ747LF, PFQ748LF, PFQ749LF, PFQ750LF, 
            PFQ751LF, PFQ785LF, PFQ886LF, PFQ752LF, PFQ753LF
    Optional suffix:
            A1    - Accuracy 1% 
            4BF   - 4" (100mm) Back flange 
            4FF   - 4" (100mm) Front flange 
            4UC-P - 4" (100mm) U-Clamp (for SS movement)  
            4UC-Q - 4" (100mm) U-Clamp (for brass movement)
            DRY   - Supply gauge dry 
            EN    - EN837-1 compliant
            SF4   - 4" (100mm) Silicone filled
            R1    - psi 
            R2    - kPa
            R3    - kg/cm2 
            R4    - cm of H2O 
            R5    - ft of H2O
            R6    - in of Hg 
            R7    - mm of Hg  
            R8    - in of H2O
            R9    - oz/in2 
            R10   - atmosphere 
            R11   - bar
            R12   - mbar 
            R13   - MPa 
            R14   - mH2O
            R15   - mmH2O
            R16   - Pa 
            T1    - BSP(G) 
            T2    - BSPT(R)



Facility : Changshu, Jiangsu, China

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Pressure Gauges[1] [2] [3]
PEM-LF Series, 1.5" & 2" & 2.5" dials * 1/8 - 1/4" CLD 23 MLTPL
PET-LF Series, 2.5" dial (* and swivel) 3/4" CLD 23 MLTPL
PFQ-LF Series, 1.5", 2", & 2.5" dials * 1/8" - 1/4" CLD 23 MLTPL

[1] * = with socket, solder, and bourdon tube
    
    Codes:
    PEM-LF - 1.5" (40mm) dial size - 1/8" connection (NPT unless otherwise indicated):  
    Bottom: PEM1297LF, PEM1299LF, PEM1300LF, PEM1301LF, PEM1320LF, PEM1321LF, PEM1322LF, 
            PEM1323LF
    Back:   PEM1397LF, PEM1399LF, PEM1400LF, PEM1401LF, PEM1420LF, PEM1421LF, PEM1422LF, 
            PEM1423LF
    Optional Suffix:
            R1  - psi 
            R2  - kPa
            R3  - kg/cm2  
            R4  - cm of H2O 
            R5  - ft of H2O
            R6  - in of Hg 
            R7  - mm of Hg 
            R8  - in of H2O
            R9  - oz/in2 
            R10 - atmosphere 
            R11 - bar
            R12 - mbar 
            R13 - MPa 
            R14 - mH2O
            R15 - mmH2O
            R16 - Pa 
            T1  - BSP(G) 
            T2  - BSPT(R)
    
    PEM-LF – 2.0" (50mm) dial size - 1/8" connection (NPT unless otherwise indicated):  
    Bottom: PEM195LF, PEM196LF, PEM206LF, PEM207LF, PEM208LF, PEM197LF, PEM209LF, PEM198LF
    Back:   PEM1424LF, PEM1425LF, PEM1402LF, PEM1404LF, PEM1406LF, PEM1408LF, PEM1426LF, 
            PEM1427LF
    Optional Suffix:
            R1  - psi 
            R2  - kPa
            R3  - kg/cm2  
            R4  - cm of H2O 
            R5  - ft of H2O
            R6  - in of Hg 
            R7  - mm of Hg 
            R8  - in of H2O
            R9  - oz/in2 
            R10 - atmosphere 
            R11 - bar
            R12 - mbar 
            R13 - MPa 
            R14 - mH2O
            R15 - mmH2O
            R16 - Pa 
            T1  - BSP(G) 
            T2  - BSPT(R)
    
    PEM-LF – 2.0" (50mm) dial size - 1/4" connection (NPT unless otherwise indicated):  
    Bottom: PEM135LF, PEM136LF, PEM199LF, PEM201LF, PEM202LF, PEM203LF, PEM204LF, PEM205LF
    Back:   PEM1428LF, PEM1429LF, PEM1403LF, PEM1405LF, PEM1407LF, PEM1409LF, PEM1410LF, 
            PEM1411LF
    Optional Suffix:
            R1  - psi 
            R2  - kPa
            R3  - kg/cm2  
            R4  - cm of H2O 
            R5  - ft of H2O
            R6  - in of Hg 
            R7  - mm of Hg 
            R8  - in of H2O
            R9  - oz/in2 
            R10 - atmosphere 
            R11 - bar
            R12 - mbar 
            R13 - MPa 
            R14 - mH2O
            R15 - mmH2O
            R16 - Pa 
            T1  - BSP(G) 
            T2  - BSPT(R)
    
    PEM-LF – 2.5" (63mm) dial size – 1/4" connection (NPT unless otherwise indicated):
    Bottom: PEM210LF, PEM152LF, PEM153LF, PEM154LF, PEM155LF, PEM211LF, PEM212LF, PEM213LF, 
            PEM214LF, PEM215LF, PEM216LF, PEM217LF, PEM218LF, PEM219LF, PEM290LF, PEM291LF, 
            PEM292LF
    Back:   PEM1431LF, PEM1436LF, PEM1437LF, PEM1438LF, PEM1439LF, PEM1440LF, PEM1441LF, 
            PEM1442LF, PEM3413LF
    
    Optional suffix:
            ECASE15SSBK  - 1.5" (40mm) SS back case connection
            ECASE15SSBTM - 1.5" (40mm) SS bottom connection
            ECASE20SSBK  - 2" (50mm) SS back case connection
            ECASE20SSBTM - 2" (50mm) SS bottom connection
            EN           - EN837-1 compliant
            GL15         - Glass lens for 1.5" (40mm) dial
            GL2          - Glass lens for 2" (50mm) dial
            GL25         - Glass lens for 2.5" (63 mm) dial
            R1           - psi 
            R2           - kPa
            R3           - kg/cm2 
            R4           - cm of H2O 
            R5           - ft of H2O
            R6           - in of Hg 
            R7           - mm of Hg 
            R8           - in of H2O
            R9           - oz/in2 
            R10          - atmosphere 
            R11          - bar
            R12          - mbar 
            R13          - MPa 
            R14          - mH2O 
            R15          - mmH2O
            R16          - Pa 
            T1           - BSP(G) 
            T2           - BSPT(R)
    
    
[2] Note: For 1.5" to 2" SS internals, please see PRL Series Regulator Gauges.
    
    PFQ-LF – 1.5" (40mm) dial size – 1/8" connection (NPT unless otherwise indicated):
    Bottom: PFQ1102LF, PFQ1103LF, PFQ1104LF, PFQ1105LF, PFQ1106LF, PFQ1107LF, PFQ1108LF, 
            PFQ1109LF, PFQ1110LF, PFQ1111LF, PFQ1112LF, PFQ1113LF
    Back:   PFQ1122LF, PFQ1123LF, PFQ1124LF, PFQ1125LF, PFQ1126LF, PFQ1127LF, PFQ1128LF, 
            PFQ1129LF, PFQ1130LF, PFQ1131LF,PFQ1132LF, PFQ1133LF
    Optional suffix:
            15DRY - Supply 1.5" (40mm) gauge dry
            15FF  - 1.5" (40mm) Front flange
            15UC  - 1.5" (40mm) U-Clamp
            R1    - psi 
            R2    - kPa
            R3    - kg/cm2 
            R4    - cm of H2O 
            R5    - ft of H2O
            R6    - in of Hg 
            R7    - mm of Hg 
            R8    - in of H2O
            R9    - oz/in2 
            R10   - atmosphere 
            R11   - bar
            R12   - mbar 
            R13   - MPa 
            R14   - mH2O
            R15   - mmH2O
            R16   - Pa 
            T1    - BSP(G) 
            T2    - BSPT(R)
    
    PFQ-LF – 2.0" (50mm) dial size – 1/8" connection (NPT unless otherwise indicated):
    Bottom: PFQ2400LF, PFQ2401LF, PFQ2402LF, PFQ2403LF, PFQ2404LF, PFQ2405LF, PFQ2406LF, 
            PFQ2407LF, PFQ2408LF, PFQ2409LF, PFQ2410LF, PFQ2411LF, PFQ2412LF, PFQ2413LF, 
            PFQ2414LF, PFQ2415LF, PFQ2416LF, PFQ2417LF, PFQ2418LF, PFQ2419LF, PFQ2420LF,
            PFQ2421LF, PFQ2422LF, PFQ2423LF, PFQ2424LF, PFQ2425LF
    Back:   PFQ2426LF, PFQ2427LF, PFQ2428LF, PFQ2429LF, PFQ2430LF, PFQ2431LF, PFQ2432LF, 
            PFQ2433LF, PFQ2434LF, PFQ2435LF, PFQ2436LF, PFQ2437LF, PFQ2438LF, PFQ2439LF, 
            PFQ2440LF, PFQ2441LF, PFQ2442LF, PFQ2443LF, PFQ2444LF, PFQ2445LF, PFQ2446LF,
            PFQ2447LF, PFQ2448LF, PFQ2449LF, PFQ2450LF, PFQ2451LF
    Optional suffix:
            20DRY - Supply 2" (50mm) gauge dry
            2UC   - 2" (50mm) U-Clamp
            EN    - EN837-1 compliant
            REST  - Restrictor screw
            R1    - psi 
            R2    - kPa
            R3    - kg/cm2 
            R4    - cm of H2O 
            R5    - ft of H2O
            R6    - in of Hg 
            R7    - mm of Hg 
            R8    - in of H2O
            R9    - oz/in2 
            R10   - atmosphere 
            R11   - bar
            R12   - mbar 
            R13   - MPa 
            R14   - mH2O
            R15   - mmH2O
            R16   - Pa 
            T1    - BSP(G) 
            T2    - BSPT(R)
    
    PFQ-LF – 2.0" (50mm) dial size – 1/4" connection (NPT unless otherwise indicated):
    Bottom: PFQ2452LF, PFQ2453LF, PFQ2454LF, PFQ2455LF, PFQ2456LF, PFQ2457LF, PFQ2458LF, 
            PFQ2459LF, PFQ2460LF, PFQ2461LF, PFQ2462LF, PFQ2463LF, PFQ2464LF, PFQ2465LF, 
            PFQ2466LF, PFQ2467LF, PFQ2468LF, PFQ2469LF, PFQ2470LF, PFQ2471LF, PFQ2472LF,
            PFQ2473LF, PFQ2474LF, PFQ2475LF, PFQ2476LF, PFQ2477LF
    Back:   PFQ2478LF, PFQ2479LF, PFQ2480LF, PFQ2481LF, PFQ2482LF, PFQ2483LF, PFQ2484LF, 
            PFQ2485LF, PFQ2486LF, PFQ2487LF, PFQ2488LF, PFQ2489LF, PFQ2490LF, PFQ2491LF, 
            PFQ2492LF, PFQ2493LF, PFQ2494LF, PFQ2495LF, PFQ2496LF, PFQ2497LF, PFQ2498LF,
            PFQ2499LF, PFQ2500LF, PFQ2501LF, PFQ2502LF, PFQ2503LF
    Optional suffix:
            20DRY - Supply 2" (50mm) gauge dry
            2UC   - 2" (50mm) U-Clamp
            EN    - EN837-1 compliant
            REST  - Restrictor screw
            R1    - psi 
            R2    - kPa
            R3    - kg/cm2 
            R4    - cm of H2O 
            R5    - ft of H2O
            R6    - in of Hg 
            R7    - mm of Hg 
            R8    - in of H2O
            R9    - oz/in2 
            R10   - atmosphere 
            R11   - bar
            R12   - mbar 
            R13   - MPa 
            R14   - mH2O
            R15   - mmH2O
            R16   - Pa 
            T1    - BSP(G) 
            T2    - BSPT(R)
[3] PFQ-LF – 2.5" (63mm) dial size – 1/4" connection: 
    Bottom: PFQ801LF, PFQ790LF, PFQ798LF, PFQ799LF, PFQ791LF, PFQ792LF, PFQ794LF, PFQ795LF, 
            PFQ800LF, PFQ802LF, PFQ803LF, PFQ804LF, PFQ805LF, PFQ806LF, PFQ807LF, PFQ817LF, 
            PFQ808LF, PFQ809LF, PFQ810LF, PFQ811LF, PFQ812LF, PFQ813LF, PFQ814LF, PFQ816LF, 
            PFQ818LF 
    Back:   PFQ900LF, PFQ890LF, PFQ898LF, PFQ899LF, PFQ891LF, PFQ892LF, PFQ894LF, PFQ895LF, 
            PFQ901LF, PFQ902LF, PFQ903LF, PFQ904LF, PFQ905LF, PFQ906LF, PFQ907LF, PFQ917LF, 
            PFQ908LF, PFQ909LF, PFQ914LF, PFQ910LF, PFQ911LF, PFQ912LF, PFQ915LF, PFQ918LF, 
            PFQ913LF
    Optional suffix:
            25BF  - 2.5" (63mm) Back flange
            25DRY - Supply 2.5" (63mm) gauge dry
            25FF  - 2.5" (63mm) Front flange
            25UC  - 2.5" (63mm) U-Clamp
            EN    - EN837-1 compliant
            SF25  - 2.5" (63mm) Silicone filled
            A1    - Accuracy 1%
            R1    - psi 
            R2    - kPa
            R3    - kg/cm2 
            R4    - cm of H2O 
            R5    - ft of H2O
            R6    - in of Hg 
            R7    - mm of Hg 
            R8    - in of H2O
            R9    - oz/in2 
            R10   - atmosphere 
            R11   - bar
            R12   - mbar 
            R13   - MPa 
            R14   - mH2O
            R15   - mmH2O
            R16   - Pa 
            T1    - BSP(G) 
            T2    - BSPT(R)
    
    PET-LF – 2.5" (63mm) dial size – 3/4" Female Swivel Hose Connection:
    Bottom: PETW213LF, PETW217LF, PETM213LF, PETM217LF
    Optional suffix:
            R1  - psi 
            R2  - kPa
            R3  - kg/cm2 
            R4  - cm of H2O 
            R5  - ft of H2O
            R6  - in of Hg 
            R7  - mm of Hg 
            R8  - in of H2O
            R9  - oz/in2 
            R10 - atmosphere 
            R11 - bar
            R12 - mbar 
            R13 - MPa 
            R14 - mH2O
            R15 - mmH2O
            R16 - Pa



Facility : Shanghai, China

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Pressure Gauges[1]
PEM-LF Series, 4" dial* 1/8" - 1/4" CLD 23 MLTPL

[1] * - with socket, solder, and bourdon tube 
    Codes:
    PEM-LF - 4" (100 mm) dial size - 1/4" Connection
    Bottom: PEM220LF, PEM221LF, PEM222LF, PEM223LF, PEM224LF PEM225LF, PEM226LF, PEM227LF
    Optional Suffix:
            R1  - psi 
            R2  - kPa
            R3  - kg/cm2 
            R4  - cm of H2O 
            R5  - ft of H2O
            R6  - in of Hg 
            R7  - mm of Hg 
            R8  - in of H2O
            R9  - oz/in2 
            R10 - atmosphere 
            R11 - bar
            R12 - mbar 
            R13 - MPa 
            R14 - mH2O
            R15 - mmH2O
            R16 - Pa 
            T1  - BSP(G) 
            T2  - BSPT(R)



Facility : Taicang, Jiangsu, China

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Pressure Gauges[1]
PCT-LF Series, 4.5" dial* 1/8" - 1/4" CLD 23 MLTPL

[1] * - with socket, solder, and bourdon tube
    
    Codes:
    PCT-LF - 4.5"(115mm) dial size - 1/4" Connection
    Bottom: PCT320LF, PCT329LF,  PCT330LF, PCT328LF, PCT332LF, PCT333LF, PCT334LF, PCT319LF,
    
            PCT321LF, PCT322LF, PCT323LF, PCT324LF, PCT325LF, PCT326LF, PCT331LF, PCT293LF, 
            PCT294LF, PCT295LF, PCT327LF
    
    Optional Suffix:
    45BF - 4.5" (115mm) Back flange
    R1   - psi 
    R2   - kPa
    R3   - kg/cm2 
    R4   - cm of H2O 
    R5   - ft of H2O
    R6   - in of Hg 
    R7   - mm of Hg 
    R8   - in of H2O
    R9   - oz/in2 
    R10  - atmosphere 
    R11  - bar
    R12  - mbar 
    R13  - MPa 
    R14  - mH2O
    R15  - mmH2O
    R16  - Pa 
    T1   - BSP(G) 
    T2   - BSPT(R)
    



 
Wouter Witzel Eurovalve B.V. 
Industrieterrein De Pol 12
7581 CZ Losser 
7580 AB 
The Netherlands 
31 535 36 95 36
Visit this company's website


Facility : The Netherlands

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Valves
Butterfly valve, double flanged type, EVFS-i 4" - 48" D. HOT MLTPL
Butterfly valve, wafer lugged type, EVTLS-i 4" - 48" D. HOT MLTPL



 
X-Float Ltd 
North Industrial Park, 7
7 Bareket St 
Caesarea 3079541 
Israel 
972 54 537 4020
Visit this company's website


Facility : Or Akiva, Israel

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Miscellaneous Process Devices/Components
xfloat HDPE float [1] CLD 23 HDPE

[1] Certification is for HDPE float only, for use in tanks 50 L and greater.



 
X-Flow B.V. 
Marssteden 50
7547 Tc Enschede 
The Netherlands 
31-53 428 7350


Facility : Enschede, The Netherlands

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Filtration Devices/Components [G]
End Cap PVC 8" [1] [2] CLD 23 MLTPL
HFS60 [1] CLD 23 MLTPL
HFW1000 [1] CLD 23 MLTPL
XF20 [1] CLD 23 MLTPL
XF30 [1] CLD 23 MLTPL
XF32 [1] CLD 23 MLTPL
XF40 [1] CLD 23 MLTPL
XF40C [1] CLD 23 MLTPL
XF53 [1] [2] CLD 23 MLTPL
XF55 [1] CLD 23 MLTPL
XF64 [1] CLD 23 MLTPL
XF75 [1] CLD 23 MLTPL

[1] Certified for minimum flow of 10,000 L/day.
[2] Certification of end cap PVC 8" is based on use with a filtration device having a
    minimum daily flow of 10,000 liters per day.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



 
Xi'an Membrane Desalination International CO., LTD 
Room 21122-21124, Block B, Silk Road Center, China Merchants Group
Xi'an International Port Zone 
Xi'an, Shanxi 710016 
China 
86 29 68310571
Visit this company's website


Facility : # 1 China

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Reverse Osmosis Element[1] [G]
RF-4040 4 x 40 in CLD 23 MLTPL
RF-8040 8 x 40 in CLD 23 MLTPL

[1] RX-4040 and RU2-4040 require a pre-service flush at 1.875 gallons per minute (gpm) for 6
    hours using tap water.
    RX-8040, RU2-8040 and RB-8040 require a pre-service flush at 8.33 gallons per minute
    (gpm) for 6 hours using tap water.
    RU3-8040 and RF-8040 require a pre-service flush at 7.29 gallons per minute (gpm) for 6
    hours using tap water.
    RB-4040 and RF-4040 require a pre-service flush at 1.67 gallons per minute (gpm) for 6
    hours using tap water.
    RU1-8040 requires a pre-service flush at 9.71 gallons per minute (gpm) for 6 hours using
    tap water.
    RU3-4040 requires a pre-service flush at 1.53 gallons per minute (gpm) for 6 hours using
    tap water.
    RU1-4040 requires a pre-service flush at 2.153 gallons per minute (gpm) for 6 hours
    using tap water.
    RU3-4040 is certified for a minimum daily flow of 2200 gallons per day for use in public
    water treatment facilities.
    RB-4040 and RF-4040 are certified for a minimum daily flow of 2400 gallons per day for
    use in public water treatment facilities.
    RX-4040 and RU2-4040 are certified for a minimum daily flow of 2700 gallons per day for
    use in public water treatment facilities.
    RU1-4040 is certified for a minimum daily flow of 3100 gallons per day for use in public
    water treatment facilities.
    RU3-8040 and RF-8040 are certified for a minimum daily flow of 10500 gallons per day for
    use in public water treatment facilities.
    RX-8040, RU2-8040 and RB-8040 are certified for a minimum daily flow of 12000 gallons
    per day for use in public water treatment facilities.
    RU1-8040 is certified for a minimum daily flow of 14000 gallons per day for use in
    public water treatment facilities.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



 
Xylem Water Solutions, Inc 
4152 136th Avenue
Holland, MI 49424 
United States 
724-452-6300
Visit this company's website


Facility : # 1 Mexico

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Miscellaneous Process Devices/Components
FRP Float Assembly [1] CLD 23 MLTPL
GPFRP/Trough Assembly [2] CLD 23 MLTPL
GPFRP Orifice Plate [3] CLD 23 FRP

[1] Certified for a minimum flow of 43 gallons per minute per square foot of filter surface
    area.
[2] Certified for a minimum daily flow of 1,152,000 gallons.
[3] Certified for a minimum daily flow of 16,000 L/day.

NOTE: NSF has not conducted production control audits at this facility.  Product Listing is
      based on type testing [ISO/IEC Guide 2: 1996(E/F/R) 14.5].


Facility : Cobourg, Ontario, Canada

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Filter Underdrain
Underdrain Installation System[1] [G] [2] CLD 23 MLTPL

[1] The Underdrain Installation System includes O-ring, sealant tape, HIPS Bridging,
    Leopold® Grout-Tite® Bridge, fasteners, formed and welded and molded end plates,
    Leopold® Type S®, XA™ or Type SL® underdrain, Leopold® I.M.S® Cap, and Leopold® I.M.S®
    200 or 1000 Media Retainer.
[2] The Underdrain Installation System is Certified for a minimum daily flow of 1
    gallon/minute per sq. ft. of filter area.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



Facility : Durango, Mexico

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Miscellaneous Process Devices/Components
Leopold Stuart Sub-Surface Rotary Agitator[1] [6] [7] CLD 23 MLTPL
Leopold Palmer S-Type Surface Agitator[1] [6] [7] CLD 23 MLTPL
Rotary Filter Agitators[1] [2] N/A CLD 23 MLTPL

[1] The minimum daily flow rate is 50 gallons per minute.
[2] This system consists of brass agitator pipe, bearing assembly, bearing assembly tee,
    endcaps, twin jet, quad jet, spray nozzles, and nozzle caps.
[3] The minimum flow rate for this product is 0.045 gallons per minute per square foot of
    water contact surface area.
[4] Certified for a minimum flow of 800 gallons per minute.
[5] This system consists of stainless steel pipe, elastomeric gaskets, PVC fittings and
    skids, and HDPE hose.
[6] This system consists of stainless steel agitator supply pipe, spray nozzle, nozzle cap,
    and bearing assembly.
[7] Agitator size is defined by the Agitator Supply Pipe length, 3" to 18" in increments of
    3".



 
Youli Holding Group Co., Ltd. 
8-88 Xingye North Road
Yuli Industrial Park, Liushi City 
Yueqing City, Zhejiang Province 
China 
86 577 6276 7999


Facility : Zhejiang, China

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Valves[G]
YOULI Butterfly Valve 4" - 24" C. HOT MLTPL
YOULI Butterfly Valve 4" - 24" D. HOT MLTPL
YOULI Flange Vertical Check Valve 4" - 10" C. HOT CPVC
YOULI Flange Vertical Check Valve 4" - 10" D. HOT MLTPL
YOULI Flanged Ball Valve 4" - 10" C. HOT MLTPL
YOULI Flanged Ball Valve 4" - 10" D. HOT MLTPL
YOULI Flanged Diaphragm Valve 4" - 6" D. HOT MLTPL
YOULI Flanged Diaphragm Valve 4" - 6" C. HOT MLTPL

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



 
Yuyao Sanlixin Solenoid Valve Co., Ltd. 
No.9 Hongqiao Road, Yuyao
Ningbo, Zhejiang 315400 
China 
86 574 62559181


Facility : Zhejiang, China

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Solenoid Valves[1] [G]
NSLP-(B)-(E)-(C)-(V)-(D)-(X)-(P)-(F)-(Q) 1/8" - 2" C. HOT MLTPL
NZS-(B)-(E)-(C)-(V)-(D)-(X)-(P)-(F)-(Q) 3/8" - 2" C. HOT MLTPL

[1] (B) Configuration
        1 - Normally Closed
        2 - Normally Open
    (E) Coil type
        D - DIN Standard Connections,Fully Encapsulated
        A - Metallic Hosing DIN Standard
        N - Lead Wires Water-tight,Fully Encapsulated
        X - Ex-proof Coil
        S - NASS Coil
        M - SM Coil
    (C) Coil class
        F - F class
        H - H class
    (V) Voltage
        01 – AC110V/AC120V
        02 - AC220V/AC230V
        03 - AC36V
        04 - AC48V
        05 - AC24V
        06 - AC12V
        08 - AC380V
        12 - DC12V
        13 - DC24V
    (D) Seal material
        E - EPDM
    (X) Body material
        1 - Forged Brass
        9 - Forged Brass
    (P) Pipe size
        A - 1/8" (NSLP series valves only)
        B - 1/4" (NSLP series valves only)
        C - 3/8"
        D - 1/2"
        E - 3/4"
        G - 1"
        H - 1 1/4"
        J - 1 1/2"
        K - 2"
    (F) Orifice
        01 - 1.0 (NSLP series valves only)
        C1 - 1.2 (NSLP series valves only)
        C2 - 1.5 (NSLP series valves only)
        02 - 2.0 (NSLP series valves only)
        C3 - 2.5 (NSLP series valves only)
        03 - 3.0 (NSLP series valves only)
        04 - 4.0
        05 - 5.0
        06 - 6.0
        C8 - 7.5
        10 - 10.0
        C9 - 10.5 (SLP series valves only)
        13 - 13.0
        16 - 16.0 (NZS series valves only)
        20 - 20.0
        25 - 25.0
        32 - 32.0
        40 - 40.0
        50 - 50.0
    (Q) Options
        L  - Neon Lamp
        N  - NPT
        P  - PT
        R  - RC
        RP - RP
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



 
Zaoqiang Yaxin Environmental Protection Technology Co., Ltd. 
Men Zhuang FRP Industrial Zone
Zaoqiang 053100 
China 
86 318 713 1696


Facility : Zaoqiang, China

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Pressurized Water Storage Tanks[G]
FRP tank 0713 >= 1 gal D. HOT MLTPL
FRP tank 0717 >= 2 gal D. HOT MLTPL
FRP tank 0735 >= 5 gal D. HOT MLTPL
FRP tank 0817 >= 2 gal D. HOT MLTPL
FRP tank 0820 >= 3 gal D. HOT MLTPL
FRP tank 0835 >= 6 gal D. HOT MLTPL
FRP tank 0844 >= 8 gal D. HOT MLTPL
FRP tank 0917 >= 3 gal D. HOT MLTPL
FRP tank 0935 >= 8 gal D. HOT MLTPL
FRP tank 0942 >= 10 gal D. HOT MLTPL
FRP tank 0948 >= 12 gal D. HOT MLTPL
FRP tank 1017 >= 4 gal D. HOT MLTPL
FRP tank 1024 >= 5 gal D. HOT MLTPL
FRP tank 1035 >= 10 gal D. HOT MLTPL
FRP tank 1044 >= 13 gal D. HOT MLTPL
FRP tank 1054 >= 16 gal D. HOT MLTPL
FRP tank 1248 >= 20 gal D. HOT MLTPL
FRP tank 1252 >= 22 gal D. HOT MLTPL
FRP tank 1265 >= 29 gal D. HOT MLTPL
FRP tank 1344 >= 21 gal D. HOT MLTPL
FRP tank 1354 >= 27 gal D. HOT MLTPL
FRP tank 1452 >= 25 gal D. HOT MLTPL
FRP tank 1465 >= 39 gal D. HOT MLTPL
FRP tank 1652 >= 39 gal D. HOT MLTPL
FRP tank 1665 >= 51 gal D. HOT MLTPL
FRP tank 1865 >= 65 gal D. HOT MLTPL
FRP tank 2069 >= 74 gal D. HOT MLTPL
FRP tank 2072 >= 82 gal D. HOT MLTPL
FRP tank 2162 >= 86 gal D. HOT MLTPL
FRP tank 2465 >= 87 gal D. HOT MLTPL
FRP tank 2472 >= 124 gal D. HOT MLTPL
FRP tank 2474 >= 128 gal D. HOT MLTPL
FRP tank 3072 >= 196 gal D. HOT MLTPL
FRP tank 3074 >= 200 gal D. HOT MLTPL
FRP tank 3660 >= 203 gal D. HOT MLTPL
FRP tank 3672 >= 253 gal D. HOT MLTPL
FRP tank 3674 >= 262 gal D. HOT MLTPL
FRP tank 4065 >= 285 gal D. HOT MLTPL
FRP tank 4072 >= 321 gal D. HOT MLTPL
FRP tank 4272 >= 359 gal D. HOT MLTPL
FRP tank 48110 >= 609 gal D. HOT MLTPL
FRP tank 4872 >= 460 gal D. HOT MLTPL
FRP tank 4894 >= 504 gal D. HOT MLTPL
FRP tank 6072 >= 689 gal D. HOT MLTPL
FRP tank 6086 >= 744 gal D. HOT MLTPL
FRP tank 6367 >= 681 gal D. HOT MLTPL
FRP tank 6396 >= 877 gal D. HOT MLTPL

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



 
Zhejiang Tianxingjian Water Co.,LTD. 
128 Anhe Road, Zhongxing Village
Zhangzhen Town, Shangyu District 
Shaoxing, 33 312363 
China 
4000-03-09-28 
86 571 86556072
Visit this company's website


Facility : Zhejiang, China

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Ultrafiltration Devices[1] [2]
TJJS-210 79.2 x 210 in CLD 23 MLTPL
TJJS-5 8.88 x 74.4 in CLD 23 MLTPL
TJTC-CUF-T-20/22/19 0.84 x 10.56 in CLD 23 MLTPL

[1] TJTC-CUF-T-20/22/19 Certified for a minimum daily permeate generate of 720 liters for
    use in public water treatment facilities. 
    TJJS-5 Certified for a minimum daily permeate generate of 120,000 liters for use in
    public water treatment facilities.
    TJJS-210 Certified for a minimum daily permeate generate of 5,000,000 liters for use in
    public water treatment facilities.
    
[2] TJTC-CUF-T-20/22/19 Requires a pre-service flush using tap water at a flow rate of 0.5
    L/min for 5 minutes.
    TJJS-5 Requires a pre-service flush using tap water at a flow rate of 83.33 L/min for 15
    minutes.
    TJJS-210 Requires a pre-service flush using tap water at a flow rate of 3472.22 L/min
    for 15 minutes.



 
Zodiac Pool Systems LLC 
2882 Whiptail Loop #100
Carlsbad, CA 92010 
United States 
760-599-9600
Visit this company's website


Facility : La Garriga, Spain

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Valves
BTFV030 3" CLD 23 MLTPL
BTFV040 4" CLD 23 MLTPL
BTFV060 6" CLD 23 MLTPL
BTFV080 8" CLD 23 MLTPL
JFKBVL3 3" CLD 23 MLTPL
JFKBVL4 4" CLD 23 MLTPL
JFKBVL6 6" CLD 23 MLTPL
JFKBVL8 8" CLD 23 MLTPL
JFKHL3 3" CLD 23 MLTPL
JFKHL4 4" CLD 23 MLTPL
JFKHL6-N 6" CLD 23 MLTPL
JFKHL6-S 6" CLD 23 MLTPL


Number of matching Manufacturers is 460
Number of matching Products is 7753
Processing time was 3 seconds