NSF Product and Service Listings

[1] FEW XYZ A
    X - Type of electronics
        4 - AquaMaster
        5 - WaterMaster
    Y - Tier of Electronics
        1 - Standard Electronics
        3 - Advanced Electronics
        5 - Premium Electronics
    Z - Type of mounting
        1 - Integral with transmitter
        2 - Remote with transmitter (Sensor + Transmitter)
        8 - Sensor only

[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

[3] Valves 27-160-9176(Y)(XX)-05:
    Y  - Bolting Material	
         1 - 316 bolting
         3 - 304 bolting
    XX - Description of non-wetted options
         29 – Valspar Red Oxide. Int. and ext.
         34 – Valspar Red Oxide. Holiday free Int. and no holiday free ext.
         35 – Valspar Red Oxide. Holiday free Int. and holiday free ext.
         87 – Valspar Red Oxide. Int. and Polyurethan ext.
         88 – Valspar Red Oxide. Holiday free Int. and Polyurethan ext.
    Where YXX can be 129, 134, 135, 187, 188, 329, 334, 335, 387, 388
[4] Acceptable order codes for interior coating are 00, 01, 03, 08, 13, 29 and 53.
[5] Certified for resilient seat to epoxy coated ductile iron seat. Certified for valves
    with no external actuation, lever and spring actuation, and lever and weight actuation.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

[1] XX and YY refer to the size in inches.
[2] Certified for use in distribution systems only.
[3] 2500 series valves are certified with the following optional connection types:
    (A)   - ALPHA
    (AX)  - ALPHA XL
    (F)   - Flanged (ANSI Class 125)
    (F2)  - Flanged (ANSI Class 250 with raised face)
    (F3)  - Flanged (PN16 with raised face)
    (F4)  - Flanged (PN16 with flat face)
    (FB)  - Flanged (ANSI Class 250 with flat face)
    (FX)  - Flex Ring
    (MJ)  - Mechanical Joint
    (PO)  - Push-on
    (PVC) – PVC
    (RF)  - Flanged (ANSI Class 150 with raised face)
    (S)   - Threaded (NPT)
    (TM)  - Tapping flanged by mechanical joint
    (TYT) – Tyton
    
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

[2] XX refers to size and may be 03, 04, 06, 08, 10 or 12.
[3] Certified for standard and outside shaft models.
[4] XX and YY refers to the size in inches.
[5] Certified for use in distribution systems only.
[6] 2500 and 3500 series valves are certified with the following optional connection types:
    (A)   - ALPHA
    (AX)  - ALPHA XL
    (F)   - Flanged (ANSI Class 125)
    (F2)  - Flanged (ANSI Class 250 with raised face)
    (F3)  - Flanged (PN16 with raised face)
    (F4)  - Flanged (PN16 with flat face)
    (FB)  - Flanged (ANSI Class 250 with flat face)
    (FX)  - Flex Ring
    (MJ)  - Mechanical Joint
    (PO)  - Push-on
    (PVC) – PVC
    (RF)  - Flanged (ANSI Class 150 with raised face)
    (S)   - Threaded (NPT)
    (TM)  - Tapping flanged by mechanical joint
    (TYT) – Tyton
[7] Certified for standard and outside shaft models.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

[3] XX refers to the size of the valve in inches and may be 03, 04, 06, 08, 10, 12, 14, or
    16.
[4] Certified for use in distribution systems only.
[5] 2100 series check valves are certified with the following optional connection types:
    - Flanged 
    - Mechanical Joint
    - Mechanical Joint Plain End
[6] XX and YY refer to the size in inches.
[7] 2500 and 3500 series valves are certified with the following optional connection types:
    (A)	  - ALPHA
    (AX)  - ALPHA XL
    (F)   - Flanged (ANSI Class 125)
    (F2)  - Flanged (ANSI Class 250 with raised face)
    (F3)  - Flanged (PN16 with raised face)
    (F4)  - Flanged (PN16 with flat face)
    (FB)  - Flanged (ANSI Class 250 with flat face)
    (FX)  - Flex Ring
    (MJ)  - Mechanical Joint
    (PO)  - Push-on
    (PVC) – PVC
    (RF)  - Flanged (ANSI Class 150 with raised face)
    (S)   - Threaded (NPT)
    (TM)  - Tapping flanged by mechanical joint
    (TYT) – Tyton
[8] The Swing Check Valve - Series 52 SC may use a "lever and weight" or "lever and spring"
    option.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

[1] X - Valve pattern
        Blank - Straight
        N - N pattern
        Z - Z pattern
    YY - Backflow shutoff designation where 2 per units may be mixed like NRS x PIV 
         BFG  - Butterfly valve
         DNRS - Domestic non-rising stem gate
         DOSY - Domestic outside stem and yoke gate
         DPIV - Domestic post indicator gate
         NRS  - Non-rising stem gate
         OSY  - Outside stem and yoke gate
         PIV  - Post indicator gate
         QT   - Quarter turn ball valve
    ZZ - Inlet and outlet connections
         Blank - Flange by flange
         FxG - Flange by groove 
         GxF - Groove by flange
         GxG - Groove by groove
    TT - Strainer options
         Blank - No strainer
         S - 77F-DI-FDA-125 strainer
         S - SS Stainless Strainer 8000F
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

[1] YY			
    LBV   - Supplied without shut-off valves		
    Blank - Supplied with shut-off valves					
    ZZ - Any Combination of the following:		
         Blank - Standard unit		
         BC - Brass Cap		
         CT (or C&T) - Cap and teather
         FP - Gear Operated Ball Valve		
         LH - Locking Handles		
         S  - Strainer (LF777SI)		
         SH - Stainless handles		
         Z3 - Stainless handles and nuts		
         Z4 - Non-removable handles		
         Z5 - Special dipped test cock adapter
[2] Products may include one or more of the following prefixes or suffixes:
    S              - Lead Free Strainer
    LF (as prefix) - Lead free
    LF (as suffix) - Less fitting
    QT             - Quarter turn ball valve
    Options for non-wetted:
    C & T - Cap and tether test cock covers
    LH    - Locking handled ball valves
    SH    - Stainless handled ball valves
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

[1] Fitting packaging is coded by the following convention:
    X indicates packaging:
    0 - Bulk pack
    1 - Blister pack
    3 - Single bag
    5 - Flag tagged
[2] Fitting sizes are coded by the following convention:
    XX, YY, and ZZ indicate size:
    02 - 1/8"
    03 - 3/16"
    04 - 1/4"
    05 - 5/16"
    06 - 3/8"
    08 - 1/2"
    10 - 5/8"
    12 - 3/4"
    14 - 7/8"
    16 - 1"
    24 - 1.5"
    32 - 2"
    40 - 2.5"
    48 - 3"
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

[1] Certified for metric equivalent sizes of 40 - 350 mm.

[1] Certification includes metric equivalent sizes of 40 - 350 mm.

[1] Certified for trims 100, 101, 102, 103, 118, 125, 126, 129, 182, and 183.
[2] Certified for trims 102, 103, 125, 126, 183.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

[1] Size shown is length x width x height.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

[1] Nomenclature:
    SDI A B C D E-F G H I
    A - 0 - Stainless steel/PPS tip, 2 - stainless steel/PEEK tip
    B - Type
        D1 - Direct Insert for Pipe 1 1/2" - 10"
        D2 - Direct Insert for Pipe 12" - 36"
        D3 - Direct Insert 36" and UP*
        H1 - Hot Tap for Pipe 1½" - 10"
        H2 - Hot Tap for Pipe 12" - 36"
        H3 - Hot Tap for Pipe 36" and UP
    C - Electronic housing
    D - Output
    E - Display
    F - O-ring (0: Viton, 1: EPDM)
    G - Shaft (2: Tungsten Carbide)
    H - Impeller (0: Stainless steel)
    I - Bearing (0: Torlon)
[8] HPR-32A-2-MMM-P-T-AAA & HPR-32iA-2-MMM-P-T-AAA: All models are 5" x 3.5" 				
    				
    MMM = Modem Type				
    				
    AAA = Activation Type				
    				
    P = Pressure Range				
    				
    T = Thread Type				
    B = 2-1/2" Female - Akron				
    D = 2-1/2" Female - British Columbia				
    E = 2-1/2" Female - Barberton				
    C = 2-1/2" Female - Canadian Standard				
    G = 2-1/2" Female - Cleveland, OH				
    H = 2-1/2" Female - Cedar Rapids				
    I = 2-1/2" Female - Erie, PA				
    N = 2-1/2" Female - National Hydrant				
    J = 2-1/2" Female - New York City				
    L = 2-1/2" Female - North Shores, MI				
    M = 2-1/2" Female - Phoenix, AZ				
    O = 2-1/2" Female - Pittsburg, PA				
    P = 2-1/2" Female - Sioux City
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

[2] E-Series G2 Ultrasonic Meter & Dynasonics® U500W: 
    5/8" x 7 1/2"  
    5/8" x 3/4" x 7 1/2" 
    3/4" x 7 1/2"
    3/4" x 9"
    1" x 10 1/4"
[3] M25 LL is Certified for the following sizes: 
    5/8" x 3/4" x 7 1/2" 
    5/8" x 7 1/2" 
[4] M35 LL is Certified for the following sizes:
    3/4" x 7 1/2"
    3/4" x 9"
[5] M55 LL is Certified for the following size:
    1" x 10 3/4"
[6] M70 LL is Certified for the following size:
    1" x 10 3/4"
[7] E- Series G2 Ultrasonic Meter & Dynasonics® U500W:
    DN15 x 110 mm
    DN15 x 114 mm
    DN15 x 165 mm
    DN20 x 190 mm
    DN25 x 260 mm
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

[1] All sizes. Certification is based on an intended end use in a water treatment
    facilities.  Parts can be made using reinforced Polyester or Vinylester resin.
[2] Certified for:
    10' ReadyLadder + Walk Through Kit for 8,000 gallon tanks and greater.
    15' ReadyLadder + Walk Through Kit for 10,000 gallon tanks and greater.
    Parts can be made using reinforced Polyester or Vinylester resin.

[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

[1] A: Series
    2  -  Smaller overall size (width and length)
    3  -  Larger overall size (width and length)
    B:
    S  -  Smart
    Blank  -  Standard
    C: Maximum strokes per minute
    D: Input voltage / power cord
    E: Stroke length / diaphragm size
    1  -  .060'' stroke / small diaphragm (MC-2) or .060'' stroke / large diaphragm (MC-3)
    2  -  .060'' stroke / large diaphragm (MC-2) or .100 stroke / large diaphragm (MC-3)
    3  -  .040'' stroke / small diaphragm (MC-2)
    4  -  .100'' stroke / large diaphragm (MC-2, MD-3)
    5  -  .040'' stroke / low flow diaphragm (MC-2)
    6  -  .060'' stroke / low flow diaphragm (MC-2)
    F: Electrical options
    G: Elastomer material (o-rings)
    V  -  FKM & TFE/P
    E  -  EP
    H: Pump head fitting and foot valve
    1  -  1/2'' ID x 3/4'' OD tubing pump head with 1/2'' barb hose footvalve
    2  -  1/4'' ID x 3/8'' OD tubing pump head with 1/4'' foot valve
    3  -  1/2'' male NPT inlet and outlet with 1/2'' M/NPT footvalve
    4  -  1/2'' female NPT inlet and outlet with 1/2'' M/NPT footvalve
    I: Miscellaneous options (may be blank)
    A  -  Hastelloy C check valve balls, PTFE prime valve ball
    B  -  Single 1/2'' ceramic ball and Hastelloy C spring P/head check valve for viscous
    fluids
    -C1/-C2/-C3/-C4/-C5  -  Communications interface
    H  -  PTFE balls (double ball check valve, prime valve) low viscosity/density fluids
    only
    J  -  PTFE balls (single ball with Hastelloy spring check valve, prime valve)
[2] Certified for use with 12.5% sodium hypochlorite or 33% hydrochloric acid. These
    products are evaluated by diluting the exposed water treatment chemical to its maximum
    use level (MUL), as defined in NSF/ANSI/CAN 60.
[3] MD1-ABC:
    A: Elastomer material (O-ring and Diaphragm)
    V: AFLAS, FKM, and Kynar Ultraflex B
    E: EPDM and Santoprene
    B: Stroke length
    1: 0.125 Stroke
    C: Electrical options
[4] Certified for use with the following chemicals:
    
      Norprene tubing or Flex-A-Prene™
      Activated Carbon (100 mg/L)
      Aluminum Chloride - 50%
      Aluminum chlorohydrate (40%) - 40%
      Aluminum Chlorohydrate/Polyaluminum Chloride - 40%
      Aluminum Sodium Sulfate (15%) - 15%
      Aluminum Sulfate (50%) - 50%
      Ammonia, aqueous (35%) - 35%
      Ammonium Hydroxide (29%) - 29%
      Ammonium Sulfate (45%) - 45%
      Calcium carbonate (65%) - 65%
      Calcium Chloride (15%) - 15%
      Calcium Hydroxide - 50%
      Calcium Hypochlorite (15%) - 15%
      Calcium Thiosulfate - 30%
      Chlorine dioxide - 2%
      Copper Sulfate (5%) - 5%
      Copper Sulfate (25%) - 25%
      Deionized Water (100%) - 100%
      Dipotassium Orthophosphate - 50% 
      Disodium Orthophosphate - 50%
      Ferric Chloride (50%) - 50%
      Ferric Sulfate (60%) - 60%
      Ferrous Chloride (40%) - 40%
      Ferrous Sulfate (30%) - 30%
      Fluorosilicic acid - 25%
      Magnesium Sulfate (25%) - 25%
      Poly (Diallyldimethylammonium Chloride)(pDADMAC) - 50%
      Poly Aluminum Chloride (100%) - 100%
      Polyacrylamide (2.5%) - 3%
      Polyaluminum Chloride (45%) - 45%
      Polyaluminum Chlorosulfate - 50%
      Polyaluminum Hydroxychlorosulfate - 75%
      Polyaluminum Silicate Sulfate - 66%
      Polyaluminum Sulfate - 50%
      Potassium Carbonate - 47%
      Potassium Chloride - 34%
      Potassium hydroxide (45%) - 45%
      Potassium Hydroxide (50%) - 50%
      Potassium Permanganate (20%) - 20%
      Potassium Tripolyphosphate - 100%
      Sodium Acid Pyrophosphate - 12%
      Sodium Aluminate - 50%
      Sodium Ascorbate - 60%
      Sodium Bicarbonate - 100%
      Sodium Bisulfate (50%) - 50%
      Sodium Carbonate - 20%
      Sodium Carbonate (85%) - 85%
      Sodium Chlorate - 100%
      Sodium Chloride (26%) - 26%
      Sodium Chlorite (7.5%) - 8%
      Sodium Dichloroisocyanurate - 25%
      Sodium Fluoride (4.0%) - 4%
      Sodium Hydroxide (50%) - 50%
      Sodium Hypochlorite (15%) - 15%
      Sodium Metabisulfite (50%) - 50%
      Sodium Percarbonate - 15%
      Sodium Permanganate (40%) - 40%
      Sodium Polyphosphates - 35%
      Sodium Silicate (100%) - 100%
      Sodium Sulfite (20%) - 20%
      Sodium Trimetaphosphate - 20%
      Sodium Tripolyphosphate - 15%
      Sulfur Dioxide (5%) - 5%
      Tetrapotassium Pyrophosphate - 60%
      Tetrasodium Pyrophosphate - 7%
      Tricalcium Phosphate (70%, slurry) - 70%
      Trichloroisocyanuric Acid- 10%
      Zinc Chloride - 62%
      Zinc Orthophosphate (100%) - 100%
      Zinc Sulfate - 36%
    
      Norprene Chemical tubing
      Acetic Acid (80%) - 80%
      Citric Acid (100%) - 100%
      Hydrochloric acid (38%) - 38%
      Hydrogen Peroxide - 30%
      Peracetic Acid (10%) - 10%
      Phosphoric acid (75%) - 75%
      Polyphosphoric Acid - 100%
      Sulfuric acid (98.5%) - 99%
    
      Flex-A-Thane tubing:
      Aluminum Chloride (50%)
      Aluminum Potassium Sulfate (100%)
      Aluminum Sulfate (50%)
      Calcium Carbonate (25%)
      Calcium Chloride (15%)
      Calcium Hydroxide (20%)
      Copper Sulfate (25%)
      Copper Sulfate (5%)
      Ferric Chloride (43%)
      Ferrous Chloride (40%)
      Ferrous Sulfate (5%)
      Magnesium Sulfate (25%)
      Potassium Carbonate (47%)
      Potassium Chloride (20%)
      Potassium Permanganate (6%)
      Sodium Bicarbonate (7%)
      Sodium Bisulfate (50%)
      Sodium Bisulfite (100%)
      Sodium Carbonate (7%)
      Sodium Chlorate (45%)
      Sodium Chloride (20%)
      Sodium Chlorite (12%)
      Sodium Fluoride (3%)
      Sodium Sulfite (10%)
      Zinc Chloride (80%)
      Zinc Sulfate (30%)
    
    These products are evaluated by diluting the exposed water treatment chemical to its
    maximum use level (MUL), as defined in NSF/ANSI/CAN 60.
    
    *Certified for contact with DI water for purpose of diluting drinking water treatment
    chemicals.
[5] FLEX-FLO® 
    a - 0, 1, 2, or 3 
    b - 0, 1, 2, 5, 6, 7, or 8 
    c - A, P, S, C, E, F, V, X or * 
    d - 4, 6, 7 or 8 
    e - T 
    f - X 
    g - any number 1 through 99 
    h - S M, H or D 
    i - any number 1 through 99 
    j - S M, H or D
[6] FLEX-FLO® M1a-bc
    a - 4, 5, 6, 7, 8, or 9
    b - 1, 3, 6, 7, or 8
    c - T, or M
[7] FLEX-PRO® 
    a - 2, 3, or 4 
    b - 1,2,3,4, or 5 
    c - 4,5,6,8 or X 
    d - S, M, B, C or X 
    e - ND, NF, NH, NJ, NK, NL, NP, NKL, TH, TK, NEE, NGG, NHH, NHHL, THH, NKKL, N2G or N2E 
    f - R, D, or blank
[8] FLEXFLO® Mabcd-ef-g
    a - 2, 3, or 4
    b - S
    c - 1, 2, 3, 4, or 5
    d - 4, 5, 6, 8, 9, or X
    e - S, M, B, C, Q, or MB
    f - ND, NF, NH, NJ, NK, NL, NP, TH, TK, TKK, NKL, NEE, NGG, NHL, NHH, NHHL, THH, NKKL, 
        N2G, N2E, GE, GG, GH, GHH, GK, G2G, or GKK
    g - R or D
[9] Certified for use with the following chemicals with TFE/P o-ring:
    
    Acetic Acid (80%)
    Aluminum Chloride (50%)
    Aluminum chlorohydrate (40%)
    Aluminum Chlorohydrate/Polyaluminum Chloride (40%)
    Aluminum Sodium Sulfate (15%)
    Aluminum Sulfate (50%)
    Ammonia, aqueous (35%)
    Ammonium Hydroxide (29%)
    Ammonium Sulfate (45%)
    Calcium carbonate (65%)
    Calcium Chloride (15%)
    Calcium Hydroxide (50%)
    Calcium Hypochlorite (15%)
    Calcium Thiosulfate - (30%)
    Chlorine dioxide (2%)
    Citric Acid (100%) (100%)
    Copper Sulfate (5%)
    Copper Sulfate (25%)
    Deionized Water (100%)
    Dipotassium Orthophosphate (50%)
    Disodium Orthophosphate (50%)
    Ferric Chloride (50%)
    Ferric Sulfate (60%)
    Ferrous Chloride (40%)
    Ferrous Sulfate (30%)
    Fluorosilicic acid (25%)
    Hydrochloric acid (38%)
    Hydrogen Peroxide (30%)
    Magnesium Sulfate (25%)
    Peracetic Acid (10%)
    Phosphoric acid (75%)
    Poly (Diallyldimethylammonium Chloride)(pDADMAC) (50%)
    Poly Aluminum Chloride (100%)
    Polyacrylamide (3%)
    Polyaluminum Chloride (45%)
    Polyaluminum Chlorosulfate (50%)
    Polyaluminum Hydroxychlorosulfate (75%)
    Polyaluminum Silicate Sulfate (66%)
    Polyaluminum Sulfate (50%)
    Polyphosphoric Acid (100%)
    Potassium Carbonate (47%)
    Potassium Chloride (34%)
    Potassium hydroxide (45%)
    Potassium Hydroxide (50%)
    Potassium Permanganate (20%)
    Potassium Tripolyphosphate (100%)
    Sodium Acid Pyrophosphate (12%)
    Sodium Aluminate (50%)
    Sodium Ascorbate (60%)
    Sodium Bicarbonate (100%)
    Sodium Bisulfate (50%)
    Sodium Bisulfite (40%)
    Sodium Carbonate (20%)
    Sodium Carbonate (85%)
    Sodium Chlorate - 100%
    Sodium Chloride (26%)
    Sodium Chlorite (7.5%)
    Sodium Dichloroisocyanurate (25%)
    Sodium Fluoride (4.0%)
    Sodium Hydroxide (50%)
    Sodium Hypochlorite (15%)
    Sodium Metabisulfite (50%)
    Sodium Percarbonate - (15%)
    Sodium Permanganate (40%)
    Sodium Polyphosphates (35%)
    Sodium Silicate (100%)
    Sodium Sulfite (20%)
    Sodium Trimetaphosphate (20%)
    Sodium Tripolyphosphate (15%)
    Sulfur Dioxide (5%)
    Sulfuric acid (99%)
    Tetrapotassium Pyrophosphate (60%)
    Tetrasodium Pyrophosphate (7%)
    Tricalcium Phosphate (70%, slurry)
    Trichloroisocyanuric Acid (10%)
    Ultra Pure Water
    Zinc Chloride (62%)
    Zinc Orthophosphate (100%)
    Zinc Sulfate (36%)
    * Certified for contact with DI water for the purpose of diluting drinking water
    treatment chemicals.
    
    Certified for use with the following chemicals with EPDM o-ring:
    
    Acetic Acid (80%)
    Aluminum Chloride (50%)
    Aluminum Sodium Sulfate (15%)
    Aluminum Sulfate (50%)
    Ammonium Hydroxide (29%)
    Ammonium Sulfate (45%)
    Calcium carbonate (65%)
    Calcium Chloride (15%)
    Calcium Hydroxide (50%)
    Calcium Hypochlorite (15%)
    Calcium Thiosulfate - (30%)
    Citric Acid (100%) (100%)
    Copper Sulfate (5%)
    Copper Sulfate (25%)
    Ferric Chloride (50%)
    Ferric Sulfate (60%)
    Ferrous Sulfate (30%)
    Fluorosilicic acid (25%)
    Hydrochloric acid (38%)
    Hydrogen Peroxide (30%)
    Magnesium Sulfate (25%)
    Peracetic Acid (10%)
    Phosphoric acid (75%)
    Potassium Carbonate (47%)
    Potassium Chloride (34%)
    Potassium hydroxide (45%)
    Potassium Hydroxide (50%)
    Potassium Permanganate (20%)
    Sodium Aluminate (50%)
    Sodium Bicarbonate (100%)
    Sodium Bisulfate (50%)
    Sodium Bisulfite (40%)
    Sodium Carbonate (20%)
    Sodium Carbonate (85%)
    Sodium Chlorate - 100%
    Sodium Chloride (26%)
    Sodium Chlorite (7.5%)
    Sodium Fluoride (4.0%)
    Sodium Hydroxide (50%)
    Sodium Hypochlorite (15%)
    Sodium Percarbonate - (15%)
    Sodium Silicate (100%)
    Sulfur Dioxide (5%)
    Zinc Chloride (62%)
    Zinc Sulfate (36%)
    
[10] Certified for contact with DI water for the purpose of diluting drinking water treatment
     chemicals.

[1] FLRM1132 model is certified for a minimum daily flow of 9,500 liters per day.
    FLRM1156 model is certified for a minimum daily flow of 42,000 liters per day.
    FLRM2825 is certified for a minimum daily flow of 8000 liters per day.
    FLRM2832 is certified for a minimum daily flow of 40000 liters per day.
[2] FLRM1132 should be flushed at 1.7 gallons per minute for 1 hour with tap water.
    FLRM1156 should be flushed at 7.7 gallons per minute for 1 hour with tap water.
    FLRM2825 should be flushed at 1.5 gallons per minute for 1 hour with tap water.
    FLRM2832 should be flushed at 7.3 gallons per minute for 1 hour with tap water.

[1] Certified for use with tanks 9 x 48 and greater.
[2] V1AABCD-EFFGG, VTT1AABCD-EFFGG, and V125AABCD-EFFGG where:
    AA - May be blank or any two digit letter code.
    B  - May be D (downflow), U (upflow), or B (backwash only).
    C  - May be M (meter) or T (timer).
    D  - May be A, A2, A3, B, C, D, E, F, G, H, I, J, K, or Z to indicate the injector
    installed.
    E  - May be blank or any letter code.  If E or M then it includes a mixing valve.
    FF - May be any number from 01 to 99.  Indicates packaging or base variations.
    GG - May be any two digit combination of letters.  If blank, cover is black or if filled
    in indicates colored covers or special labels on the cover.
[3] Certified for use with tanks 12 x 52 and greater.
[4] V15AABCD-EFFGG and VP15AABCD-EFFGG where:
    AA - May be blank or any two digit letter code.
    B  - May be D (downflow), U (upflow), or B (backwash only).
    C  - May be M (meter) or T (timer).
    D  - May be B, C, D, E, F, G, H, I, or Z to indicate the injector installed.
    E  - May be blank or any letter code.  If E or M then it includes a mixing valve.
    FF - May be any number from 01 to 99.  Indicates packaging or base variations.
    GG - May be any two digit combination of letters.  If blank, cover is black or if filled
    in indicates colored covers or special labels on the cover.
[5] Certified for use with tanks 10 x 54 and greater.
[6] Certified for use with tanks 14 x 65 and greater.
[7] V2AABCD-EFFGG and VP2AABCD-EFFGG where:
    AA - May be blank or any two digit letter code.
    B  - May be D (downflow), U (upflow), or B (backwash only).
    C  - May be M (meter) or T (timer).
    D  - May be A, A2, A3, B, C, D, E, F, G, R, S, T, U, or Z to indicate the injector
    installed.
    E  - May be blank or any letter code.  If E or M then it includes a mixing valve.
    FF - May be any number from 01 to 99.  Indicates packaging or base variations.GG - May
    be any two digit combination of letters.  If blank, cover is black or if filled in
    indicates colored covers or special labels on the cover.
[8] V2HABC-DD and V2HFABC-DD where:
    A  - May be D (downflow) or B (backwash only).
    B  - May be M (meter) or T (timer).
    C  - May be A, A2, A3, B, C, D, E, F, G, H or Z.  Indicates the injector installed.
    DD - May be any number from 01 to 99.  Indicates packaging or NPT or BSPT variations.
[9] Certified for use with tanks 18 x 65 and greater.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    
[10] V3ABC-DD where:
     A  - May be D (downflow) or B (backwash only).
     B  - May be M (meter) or T (timer).
     C  - May be A, A2, A3, B, C, D, E, F, G, or H.  Indicates the injector installed.
     DD - May be any number from 01 to 99.  Indicates packaging or NPT or BSPT variations.
[11] V3006-XX where XX may be 01, 02 or 04.  Indicates handle color, handle direction or
     packaging.
[12] Certified for use with tanks 13 x 54 and greater.

[3] For all valves: 
    [2] May represent the following suffixes when present: 
        -316 - 316 grade stainless steel 
        -BMP - Bent pin 
        -R   - Reversed arm 
        -V   - Vertical 
        -P   - Polyfort FPP 1601-11 
        -G   - Geon 4M4110 TRANS 9492 
        -NT  - Natural (P Series only)
        -BK  - Black (P Series only)
[4] M, I, HT and VT Series Float Valves: 
    I  - I Series 
    M  - M Series 
    HT - Horizontal Tank 
    VT - Vertical Tank 
    (A) Valve type: 
        A     - Adjustable 
        blank - Non-adjustable 
    (B) Inlet size: 
        25 - 1/4" tubing inlet 
        2P - 1/4" pipe inlet 
        2S - 1/4" short pipe inlet 
        38 - 3/8" tubing inlet 
        3P - 3/8" pipe 
        05 - 1/2" pipe 
        I2 - Index 1/4" tubing 
        B2 - Bayonet 1/4" tubing 
        32 - 3/8" step 1/4" tubing 
        T5 - 1/2" tapped with 1/4" 
    (C) Material: 
        2 - HR 5009 
        7 - Polyfort FPP 1606-11 
        8 - Geon M4110 
    (D) Orifice size: 
        Blank - 0.093 #4 
        1  - .042 
        2  - .052 
        3  - .062 
        4  - .093 
        6  - .125 
        10 - .1719 
        12 - .188 
    (E) Float: 
        Blank - PF154-NT 
        AN - PF152-NT 
        AB - PF152-BK 
        IB - PF1525-BK 
        IN - PF1525-NT
        BN - PF153-NT 
        BB - PF153-BK 
        GB - PF154-BK 
        CN - PF1753-NT 
        CB - PF1753-BK 
        DN - PF222-NT 
        DB - PF222-BK 
        EN - PF224-NT 
        EB - PF224-BK 
        FN - PF1752-NT 
        FB - PF1752-BK 
        NT - Natural 
        BK - Black 
    (F) Arm: 
        Blank - Reg. Arm 
        S    - s-arm 
        IH00 - Hoz 0" drop 
        IH07 - Hoz .75" drop 
        IH12 - Hoz 1.2" drop 
        IH20 - Hoz 2" drop 
        IV01 - Vert 1" drop
[5] P Series Valves: 
    (I) Mount: 
        S - Standard 
        T - Tank 
        X - Extended 
    (J) Inlet size: 
        38  - 3/8" 
        05  - 1/2" 
        75  - .75" 
        100 - 1" 
        125 - 1.25" 
        150 - 1.5" 
    (K) Outlet size: 
        38 - 3/8" 
        05 - 1/2" 
        Blank - Inlet size 
    (L) Orifice size: 
        L   - Low flow 
        S   - Standard flow 
        187 - .187" 
        25  - .25" 
        312 - .312" 
    (M) Trim hardware: 
        S - Stainless
        This character may be blank
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

[1] Certified for a minimum daily flow of 18,612 L.
[2] Size is expressed as diameter x length.
[3] The Fiber Repair Kit has been approved for use with these modules.
[4] Also Certified for equivalent metric sizes.
[5] Size:
    IPD-51 Module (8" x 60")
    IPD-77 Module (8" x 80")
    IPD-51XP Module (8" x 60")
    IPD-77XP Module (8" x 80")
    The last number in the model designation refers to the number of modules in the skid.
[6] IntegraTec™ XP 36 ESI requires a pre-service flush of six (6) gallons per minute (gpm)
    for four (4) hours with tap water.
[7] Certified for a minimum daily flow of 44,000 liters per day. 
[8] Flushing Procedure:  The IntegraFlo IC-52XP is flushed for 4 hours at a flow rate of 7
    gallons per minute with de-ionized water.

[1] Only products bearing the NSF Mark on the product, product packaging, and/or
    documentation shipped with the product are Certified.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

[1] Only product with NPT thread is certified.

[1] Certification of this product has been performed  to the health effects requirements of
    NSF/ANSI Standard 61, which assesses the acceptability of potential extractants from the
    chemical generator.  No evaluation has been performed on the strength or efficacy of the
    chemical(s) generated.  As a unit operation, maintenance and the consistency of the
    source ingredients may affect the performance of the unit, the ensuing chemical(s) is
    not Certified by NSF/ANSI Standard 60.
[2] Certified for a maximum 6mg/L Sodium Fluorosilicate added to drinking water with a
    minimum of 300,000 gallons of water treated per day per tube.  
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

[1] Certification requested for EPDM seat and stainless steel disc only.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

[1] Certification requested for EPDM seat and stainless steel disc only.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

[1] All products are Certified for use with water treatment plant intake systems with a
    minimum daily flow of 4,623 gallons.
[2] Screens may be constructed of 90/10 Copper Nickel, Stainless Steel 304, Stainless Steel
    316, and Jacquelyn™ Coated Stainless Steel 304 or 316 material.
[3] Intake screens are Certified for all sizes.
[4] Intake Pipes and Fittings are Certified for a maximum length of 26 feet in water
    treatment plant intake systems.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

[1] (a) Valve size in inches (02-72)
    (b) Style of valve:
        - A/B (Wafer)
        - C (Lug)
        - D (Flange)
    (c) Body material:
        - 1 (Cast Iron)
        - 2 (Ductile Iron)
        - 3 WCB (carbon steel)
        - 4 CF8M (316 SS)
        - B (Bronze)
    (d) Pressure rating:
        - 2 (285 PSI max)
        - 3 (275 PSI max)
        - 4 (250 PSI max)
        - 5 (200 psi max)
        - 6 (232 psi max)
        - 7 (150 psi max)
        - 8 (125 psi max)
    (e) Stem material:
        - 1,6 (416 SS)
        - 4 (316 SS)
        - 5 (17-4 PH)
    (f) Operator:
        - 3 (lever)
        - 5 (gear)
        - 6 (DA actuator)
        - 7 (FC actuator)
        - 8 (FO actuator)
        - 9 (electric)
        - C (nut)
        - U (chain wheel)
        - X (bare stem)
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

[1] Only products bearing the NSF Mark on the product, product packaging, and/or
    documentation shipped with the product are Certified.
[2] Only those models with a 316 stainless steel disc or nylon coated disc and EPDM seat are
    Certified.
[3] Certified for equivalent metric sizes.
[4] Only those models with a 316 stainless steel disc and EPDM seat are Certified.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

[1] The variables in the trade name code "#MFX-nA" denote the following in Mixed Flow pumps:
    - #: size of pump (in)
    - n: number of blades. Options: 1, 2, 3
    
    The variable "#" in the trade name code "#PO-1A" in Axial Flow pumps denotes the size of
    the pump in inches.
[2] Axial flow pumps are Certified for a minimum daily flow of 1,044,000 gallons.
[3] Mixed flow pumps are Certified for a minimum daily flow of 1,808,640 gallons.
[4] The variables in the trade name code "#FF-n$" denote the following:
    - #: size of pump (in)
    - FF: family. Options: WH, WL, HH, WBH, WBL, CC, HXH, LS, MS, Z, WM
    - n: number of blades. Options: 1, 2, 3
    - $: configuration. Options: C (closed), A (open)
[5] Certified for a minimum daily flow of 18,720 gallons.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

[1] X - Valve pattern 
        Blank - Straight 
        N - N pattern 
        Z - Z pattern 
    YY - Backflow shutoff designation: where 2 per units may be mixed like NRS x PIV 
         DNRS - Domestic Non-Rising Stem Gate 
         DPIV - Domestic Post Indicator Gate 
         DOSY - Domestic Outside Stem and Yoke Gate 
         BFG  - Butterfly 
    ZZ - Inlet and outlet connections 
         Blank - Flange by flange 
         FxG   -  Flange by groove 
         GxF   - Groove by flange 
         GxG   - Groove by groove 
    TT - Strainer options 
         Blank - No strainer 
         S - Strainer 77F-DI-FDA-125
[2] Bypass Valve Options:
    GPM - 3/4" Bypass with GPM Meter
    CFM - 3/4" Bypass with CFM Meter
    LM  - 3/4" Bypass Less CFM Meter
    LF800LA models are not sold with the GPM or CFM meters.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

[1] Bypass Valve Options:
    GPM - 3/4" Bypass with GPM Meter
    CFM - 3/4" Bypass with CFM Meter
    LM  - 3/4" Bypass Less CFM Meter
    LF800LA models are not sold with the GPM or CFM meters.
[2] Suffixes may consist of:
    (1) Isolation Shut-off Valve Options: 
        LG   - Assembly ships without isolation shut-off valves 
        NRS  - Non-rising stem 
        DNRS - Domestic non-rising stem 
        OSY  - Outside stem and yoke 
        DOSY - Domestic outside stem & yoke 
    (2) Installation Option: 
        LH - Test cocks mounted for right-to-left flow installation
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

[1] Product may have box stickers or temporary tags with the following configuration
    descriptions:
    LF850 / LF850U: 
    QT - Quarter Turn Ball Valve 
    DC - Double Check Assembly 
    LF860 / LF860U: 
    QT  - Quarter Turn Ball Valve 
    RP  - Reduced Pressure Assembly 
    RPZ - Reduced Pressure Zone
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

[1] S  - mounting feature
         0 - standard paddlewheel sensor
         1 - paddlewheel sensor for compact mounting
    T  - Technology of electronic transmission
         H - hall effect
         C - coil
         P - push-pull
    X  - Flow functionality
         0 - bidirectional standard sized FLS F3.0 model
         3 - mono-directional
    YZ - Number indication materials (sensor & gasket)
         09, 10, 11, 12, 38, 40 - mono and bi directional magmeters
         01 - hot tap magmeter and high pressure paddlewheel sensor
         01 thru 24 - paddlewheel sensor
         01 thru 12 - flow switch, paddlewheel transmitter and paddlewheel sensor for
    compact mounting
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

[1] S  - mounting feature
         0 - standard paddlewheel sensor
         1 - paddlewheel sensor for compact mounting
    T  - Technology of electronic transmission
         H - hall effect
         C - coil
         P - push-pull
    X  - Flow functionality
         0 - bidirectional standard sized FLS F3.0 model
         3 - mono-directional
    YZ - Number indication materials (sensor & gasket)
         09, 10, 11, 12, 38, 40 - mono and bi directional magmeters
         01 - hot tap magmeter and high pressure paddlewheel sensor
         01 thru 24 - paddlewheel sensor
         01 thru 12 - flow switch, paddlewheel transmitter and paddlewheel sensor for
    compact mounting
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

[4] Certified for a minimum daily flow of 150,000 L.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

[4] Certified for a minimum daily flow of 150,000 L.
[7] 600 Volt: 1 AWG, 1/0 AWG, 2 AWG, 2/0 AWG, 3/0 AWG, 4 AWG, 4/0 AWG, 250 MCM, 350 MCM, 500
    MCM
    5000 Volt: 1 AWG, 1/0 AWG, 2 AWG, 2/0 AWG, 3/0 AWG, 4 AWG, 4/0 AWG
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

[3] Only products bearing the NSF Mark on the product, product packaging, and/or
    documentation shipped with the product are Certified.
[4] Certified for a minimum daily flow of 150,000 L. Pumps with bronze cases are not
    Certified.
[5] [v][w][x][y]-[z]
       v - Size of pump in inches (5"-52")
       w - Impeller type (blank, C, E)
       x - Pump model (B, G, H, HQ, J, K, KX, L, LQ, M, MQ, N, P, Q, TM)
       y - Impeller design (blank, F, H, L, M, X, Y, Z)
       z - Number of stages 
[6] Certified for a minimum daily flow of 150,000 L.
[7] 600 Volt: 1 AWG, 1/0 AWG, 2 AWG, 2/0 AWG, 3/0 AWG, 4 AWG, 4/0 AWG, 250 MCM, 350 MCM, 500
    MCM
[8] 5000 Volt: 1 AWG, 1/0 AWG, 2 AWG, 2/0 AWG, 3/0 AWG, 4 AWG, 4/0 AWG
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

[1] NNN FTP-L BL [IS] PNYY [BE] and MM FTC-L PNYY are certified for a minimum flow of
    360,000 liters per day.
    NNN FTP-L BL XL [IS] PNYY [BE], NNN FTP-L SFL [IS] PNYY HTAL/VTAL [BE], NNN FTP-L B PNYY
    HTAL/VTAL [BE], MM B FTP-L PNYY, NNN FTP-L FL PNYY HTAL/VTAL [BE], NNN FTP-L EX PNYY
    [BE], and NNN FTP-L C PNYY [BE] are certified for a minimum flow of 2,800,000 liters per
    day.
    MM HF FTP-L PNYY HTAL/VTAL [BE] is certified for a minimum flow of 2,160,000 liters per
    day.
    SMP XXXD LZZZZ PNYY [PTFE] and i-UF KK PNYY are certified for a minimum flow of 360,000
    liters per day.
    JJJJ FTAUR-PPPP PRFV/ PNYY is certified for a minimum flow of 3,600,000 liters per day.
    
    All models require a pre-service flush with tap water at 7 gpm for a half hour.
    
    Certified for municipal use.
    
    The SMP "static mixers" are sold individually and/or as an optional add on for FTP- BL,
    FTP- BL XL, FTP- SFL, FTP- B, B FTP, FTC, FTP- FL,HF
    FTP, FTP-EX, FTP-C, FTAUR, i-UF or v-UF filter housings.
[2] Explanation of code/prefix on trade names:
    NNN: number of cartridges (7–470)
    MM: number of bags or baskets (5 – 52)
    KK: number of UF modules (5-60)
    L: length of the cartridges (30”-70” in multiples of 10”)
    BL: cartridges filter boltless opening
    BL XL: cartridges filter boltless opening extra length
    B: bags system (cartridges connection system)
    SFL: single flange (cartridges connection system)
    FTC: basket system (cartridges connection system)
    FL: double flange (cartridges connection system)
    HF: high flow (cartridges connection system)
    EX: removable filtering element (cartridges connection system)
    C: bell cartridge filter (cartridges connection system)
    FTAUR: self-cleaning filter (cartridges connection system)
    XXX: diameter of mixer (250–2000mm)
    ZZZZ: length of the mixer
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

[1] Certified for equivalent metric sizes.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

[2] Certification request does not include flange gaskets.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

[1] A - Retention rating (0.5 - 75 microns) 
    B - Length (5" - 40") 
    C - End configuration 
        P6: Self-seal spring on one end 
        PX: Extended core 
        NN: No end caps, no gaskets
[2] HF RF [A]-[B][C][D]
    HF RF - Reverse Flow High Flow Series
    A     - Retention Rating (1-100 microns)
    B     - Length (40'' or 60")
    C     - End Configuration (P2 or P30)
    D     - Gasket or O-Ring
    E     - EPDM
    S     - Silicone
[3] Certified for a minimum daily flow of 270,000 L.
[4] Models 20" and smaller are evaluated to point-of-entry use.
    Models larger than 20" are certified for a minimum daily flow rate of 2880 gallons.
[5] HF[A]-[B][C]
    HF - High Flow Series
    A  - Retention Rating (1 - 100 microns)
    B  - Length (20" - 60")
    C  - Gasket or O-Ring
         E  - EPDM
         S  - Silicon
[6] Certified for a minimum daily flow of 270,000 L.

[1] Certified for a minimum daily flow of 378 Liters per day.

[1] Certified for a minimum daily flow of 378 liters per day.

[5] Evaluated for use in a water treatment facility or distribution systems with inlet sizes
    of greater than one-inch diameter and where flow exceeds 3 gallons/minute.  Trade names
    refer to the housing only. Approved filter elements include HC/170-M or EZ-CLEAN by
    Harmsco, or other NSF/ANSI/CAN 61 Certified cartridges meeting the size and minimum flow
    requirements.
[6] Certified for Harmsco® HIF Up-Flow Filter models: HIF-42, HIF-75, HIF-100, HIF-150-FL
    and HIF-200-FL.  Certified for use in a water treatment facility or distribution systems
    with inlet sizes of greater than one-inch diameter and where flow exceeds 3
    gallons/minute.
[7] Certification is for use in a water treament facility or distribution system with inlet
    sizes greater than 1" diameter and with a minimum flow of 3 gallons/minute (16,000
    liters/day).
    Trade names refer to the housing only. Approved filter elements include HC/170-M or
    EZ-CLEAN by Harmsco, or other NSF/ANSI/CAN 61 Certified cartridges meeting the size and
    minimum flow requirements. These housings are not intended for use with cartridges above
    the Listed water contact temperature.
[8] XXX - Optional trade names suffixes may be combined in various ways to designate the
    following:
    304/304L, 316/316L - indicates the grade of stainless steel from which the housing is
    made
    HP   - High pressure housing
    DPLX - Housing is made from SS 2205
    XP   - Standard housing
    XXP  - Extreme Pressure Housing
    U    - Housing is ASME U-Stamped
    M    - Housing has the inlet and outlet on the same side
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

[1] Product also complies with NSF/ANSI 372.
[2] Certified for the following sizes:
    1.5" x 13" overall length
    2" x 10" overall length
    2" x 15.25" overall length
    2" x 17" overall length
[3] Certified for the following sizes:
    1.5" x 13" overall length
    2" x 10" overall length
    3" x 12" overall length
    4" x 14" overall length
    6" x 18" overall length
    8" x 20" overall length
    10" x 18" overall length
    12" x 20" overall length
[4] Certified for the following sizes:
    1.5" x 13" overall length
    2" x 10" overall length
    2" x 15.25" overall length
    2" x 17" overall length
    3" x 12" overall length
    4" x 14" overall length
    6" x 18" overall length
    8" x 20" overall length
    10" x 18" overall length
    12" x 20" overall length
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

[1] Certified for a minimum daily permeate flow of 1,000 gallons.  Product requires a
    potable water flush of 10 minutes at 100 PSI, followed by 20 minutes at 70 - 100 PSI
    before use.
[2] Certified for a maximum surface area of 440 sq. ft.

[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

[1] The air hose is optional.  The unit can be sold without the hose and the end use
    customer can use their own hose.
[2] Certification of the GS-9, GS-12, GS-9 v2, and GS-12 v2 does not include the motor.
[3] 76' EPDM cables are restricted to use in tanks 20,000 gallons and greater.  151' EPDM
    cables are restricted to use in tanks 40,000 gallons and greater.
[4] Certification does not include a motor.
[5] The numerical suffix (1, 3, 5, 10, 15) after the SN in the trade name indicates the
    horsepower of the motor.
[6] 200' EPDM cables are restricted to use in tanks 50,000 gallons and greater.
[7] Certification does not include a pump or a motor.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

[1] Certified for a minimum daily flow of 4,320 gallons.
[2] Only nozzles made from stainless steel are included in the Certification request.
[3] Only products bearing the NSF Mark are Certified.
[4] Size: All sizes
[5] Johnson Screens - Passive Intake Screen A-BB-CCCCA    - T or SB    - Any whole number
    between 12 and 96CCCC - HC, HCE, MF, HCH, HCHE, or MFH.

[1] Only products bearing the NSF Mark on the product, product packaging, and/or
    documentation shipped with the product are Certified.
[2] Available dimensions (thread diameter x lay length):
    1"x 7 1/2" (threaded)
    1" x 9" (threaded)
    1 1/4" x 10 3/4" (threaded)
    1 1/2" x 13" (flanged)
    2" x 15 1/4" (flanged)
    2" x 17" (flanged)
    3" x 12" (flanged)
    4" x 14" (flanged)
[3] The actual model sizes are:
    5/8" x 7 1/2" - 3/4" connection size
    5/8" x 3/4" x 5,1" - 1" connection size
    5/8" x 3/4" x 7 1/2" - 1" connection size
    3/4" x 7 1/2" - 1" connection size
        
    Available dimensions (thread diameter x lay length):
    3/4" x 7 1/2" - 3/4" connection size
    1" x 5.1" - 1" connection size
    1" x 7 1/2" - 1" connection size
    Certification does not include the brass coupling or check valve.
[4] Available dimensions (thread diameter x lay length):
    3/4" x 110 mm
    1" x 105 mm
    1" x 130 mm
    1" x 190 mm
    The brass coupling and non return valves are not included in this Certification.
[5] Available dimensions (thread diameter x lay length):
    3/4" x 7 1/2"
    1" x 7 1/2"
    The brass coupling and non return valves are not included in this Certification.
[6] Available dimensions (thread diameter x lay length):
    1" x 7 1/2" (threaded version only)
    1" x 9" (threaded version only)
    1 1/4" x 10 3/4" (threaded version only)
    1 1/2" x 12 5/8" (threaded version only)
    1 1/2" x 13" (flanged or threaded version)
    2" x 15 1/4" (flanged or threaded version)
    2" x 17" (flanged version)
    3" x 12" (flanged version)
    4" x 14" (flanged version)
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

[1] Only products bearing the NSF Mark on the product, product packaging, and/or
    documentation shipped with the product are Certified.
[2] Available dimensions (thread diameter x lay length):
    3/4" x 7 1/2"
    1" x 7 1/2"
    The brass coupling and non return valves are not included in this Certification.
[3] Available dimensions (thread diameter x lay length):
    1" x 7 1/2" (threaded version only)
    1" x 9" (threaded version only)
    1 1/4" x 10 3/4" (threaded version only)
    1 1/2" x 12 5/8" (threaded version only)
    1 1/2" x 13" (flanged or threaded version)
    2" x 15 1/4" (flanged or threaded version)
    2" x 17" (flanged version)
    3" x 12" (flanged version)
    4" x 14" (flanged version)
[4] The actual model sizes are:
    5/8" x 7 1/2": 3/4" connection size
    5/8" x 3/4" x 5,1”: 1" connection size
    5/8" x 3/4" x 7 1/2": 1" connection size
    3/4" x 7 1/2": 1" connection size
    
    Available dimensions (thread diameter x lay length):
    3/4" x 7 1/2": 3/4" connection size
    1" x 5.1”- :1" connection size
    1” x 7 1/2": 1" connection size
    Certification does not include the brass coupling or check valve.
[5] Available dimensions (flange connection x lay length):
    5" (DN125) x 10" (250mm)
    6" (DN150) x 12" (300mm)
    8" (DN200) x 14" (350mm)
    10" (DN250) x 18" (450mm)
    12" (DN300) x 20" (500mm)
[6] Available dimensions (thread diameter x lay length):
    1"x 7 1/2" (threaded)
    1" x 9" (threaded)
    1 1/4" x 10 3/4" (threaded)
    1 1/2" x 13" (flanged)
    2" x 15 1/4" (flanged)
    2" x 17" (flanged)
    3" x 12" (flanged)
    4" x 14" (flanged)
[7] Available dimensions (thread diameter x lay length):
    3/4" x 110 mm
    1" x 105 mm
    1" x 130 mm
    1" x 190 mm
    The brass coupling and non return valves are not included in this Certification.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

[1] XXX suffix in trade name refers the to length of the power cord and may be:
    000 - Stub cord
    050 - 50 ft. cord
    100 - 100 ft. cord
    200 - 200 ft. cord
[2] Aerator, Certisafe Aerator, CertiSafe Surface Aerator, Surface Aerator, CertiSafe Tank
    Aerator, and Tank Aerator may have the following model numbers: 5.1AF61XXX and
    8400AF61XXX.
[3] Certified for use in tanks >= 20,000 gallons.
[4] Certisafe Circulator, Certisafe Mixer, Mixer, Circulator, CertiSafe Tank Mixer, Tank
    Mixer, CertiSafe Municipal Mixer, Municipal Mixer, CertiSafe Tank Circulator, Tank
    Circulator, CertiSafe Municipal Circulator, Municipal Circulator, CertiSafe Floor Mount,
    CertiSafe Pipe Mount, CertiSafe Base Mount, Floor Mount, Pipe Mount, and Base Mount may
    have the following model numbers: 2400C61XXX, 3400C61XXX, 3400HC61, 4400C61XXX,
    4400HC61XXX, and 8400C61XXX.
[5] CertiSafe Suspended Mount and Suspended Mount may have the following part numbers:
    2400C61XXX, 3400C61XXX, 3400HC61XXX, 4400C61XXX, and 4400HC61XXX.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

[1] Certification for the Figure 506 Kenflex, Figure 507 MJ (M x F) Patriot II and Figure
    507 MJ (F x F) Patriot II valves include the jack screw and position indicator options.
[2] Certification for the Figure 508 Kenflex, Figure 509 MJ (M x F) Patriot II and Figure
    509 MJ (F x F) Patriot II valves includes the jack screw, position indicator, and coil
    spring options.
[3] Certification includes valves with and without outside levers.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

[4] Certified for equivalent metric sizes.
[5] Certified for distribution systems only.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

[1] Only products bearing the NSF Mark on the product, product packaging, and/or
    documentation shipped with the product are Certified.
[2] "xxx" in the trade name can be any 3-digit number and identifies the model of the
    electronics unit (non-wetted part), and "y" is any character or series of characters
    identifying electronics unit options.
[3] Certified product contains Hastelloy C-22, Hastelloy C-4 or Stainless Steel 1.4571
    electrodes, hard rubber liner, and optional Stainless Steel grounding rings.
[4] DN25 - DN3000/1" - 120"
[5] Certified product contains Hastelloy C-22, Hastelloy C-4 or Stainless Steel 1.4571
    electrodes, polypropylene liner, and optional Stainless Steel grounding rings.
[6] DN25 - DN150/1" - 6"
[7] DN25 - DN 600/1" - 24"
[8] Certified product contains Hastelloy C-22 or Stainless Steel electrodes, optional
    Stainless Steel PT sensor, coated liner, o-rings, and optional Stainless Steel grounding
    rings.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.