NSF Product and Service Listings

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] Trend and Pacer models are certified with the following optional end connections:
     - 4 inch mechanical joint
     - 6 inch mechanical joint
     - 6 inch mechanical joint for Dallas, Texas
     - 6 inch Class B mechanical joint
     - 8 inch mechanical joint
     - 6 inch flanged
     - 6 inch flanged with 2 inch NPT pipe plugs
     - 6 inch Tyton 
     - 6 inch plain end
     - 6 inch PVC
     - 6 inch vertical entry
     - 6 inch vertical entry for Traverse City TVC5
     - 6 inch ALPHA
     - 6 inch ALPHA XL
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] The filtration level (micron) and color which are used in each SK filter and may be any
    of the following:
    10  - Light Blue
    20  – Grey
    40  - Purple
    55  – Green
    70  – Brown
    100 – Black
    130 – Red
    200 – Yellow
    400 – Blue
[2] The spring type may be any of the following alphabetic codes:
    HALAR    – HALAR Coating
    HSL      - Hastelloy
    LC       - Low Cost Energy
    LC-HALAR – Low-Cost Energy – HALAR Coating
    LCHSL    - Hastelloy-Low Cost Energy
    Regular (not indicated on product name)
[3] Inlet / outlet type may be any of the following:
    ARF - Flange
    Int - Integral
    Thr - Threaded
    Vic - Victaulic
[4] Certified for a minimum flow of 72,000 L/day.
[6] Certified for a minimum flow of 1,150,200 L/day.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] Certification includes the anode only and does not include the cable or the sealant.
[2] Certified for a maximum ratio of 240 lbs. of anode to 1,000,000 gallons.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] Size is expressed as Diameter x length.
[2] PURAN PN-FR-4040 model is certified for a minimum daily flow of 2,000 gallons.
    PURAN ROCOD-325 model is certified for a minimum daily flow of 8,500 gallons.
    PURAN PN-HLEFR-8040 model is certified for a minimum daily flow of 10,500 gallons. 
    PURAN PN-BW-4021 model is certified for a minimum daily flow of 950 gallons.
    PURAN PN-BW-2540 model is certified for a minimum daily flow of 750 gallons.
    PURAN PN-BW-2521 model is certified for a minimum daily flow of 400 gallons.
    PURAN PN-SWHF-8040 model is certified for a minimum daily flow of 9000 gallons.
    PURAN PN-XLE-4040 models is certified for a minimum daily flow of 2,600 gallons.
    PURAN PN-BW-4040 models is certified for a minimum daily flow of 2,400 gallons.
    PURAN PN-LE-4040 model is certified for a minimum daily flow of 2,700 gallons.
    PURAN PN-LE-8040 model is certified for a minimum daily flow of 12,500 gallons.
    PURAN PN-XLE-8040 model is certified for a minimum daily flow of 11,000 gallons.
    PURAN PN-BW-8040 model is certified for a minimum daily flow of 10,000 gallons.
    PURAN PN-SW-4040 model is certified for a minimum daily flow of 1,500 gallons.
    PURAN PN-SW-8040 model is certified for a minimum daily flow of 6,500 gallons.
    PURAN PN-FR-8040 model is certified for a minimum daily flow of 11,500 gallons. 
    PURAN PN-FR-PRO-8040 model is Certified for a minimum daily flow of 10,500 gallons. 
[3] All models 2.5” in diameter require a 2 gpm flush for 24 hours using tap water.
    All models 4” in diameter require a 4 gpm flush for 24 hours using tap water.
    All models 8” in diameter require a 15 gpm flush for 24 hours using tap water.

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[2] E-Series G2 Ultrasonic Meter & Dynasonics® U500W: 
    5/8" x 7 1/2"  
    5/8" x 3/4" x 7 1/2" 
    3/4" x 7 1/2"
    3/4" x 9"
    3/4" x 1" x 9"
    1" x 10 1/4"
[3] M25 LL is Certified for the following sizes: 
    5/8" x 3/4" x 7 1/2" 
    5/8" x 7 1/2" 
[4] M35 LL is Certified for the following sizes:
    3/4" x 7 1/2"
    3/4" x 9"
[5] M55 LL is Certified for the following size:
    1" x 10 3/4"
[6] M70 LL is Certified for the following size:
    1" x 10 3/4"
[7] E- Series G2 Ultrasonic Meter & Dynasonics® U500W:
    DN15 x 110 mm
    DN15 x 114 mm
    DN15 x 165 mm
    DN20 x 190 mm
    DN25 x 260 mm
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] All sizes. Certification is based on an intended end use in a water treatment
    facilities.  Parts can be made using reinforced Polyester or Vinylester resin.
[2] Certified for:
    10' ReadyLadder + Walk Through Kit for 8,000 gallon tanks and greater.
    15' ReadyLadder + Walk Through Kit for 10,000 gallon tanks and greater.
    Parts can be made using reinforced Polyester or Vinylester resin.

[1] Certified for a flow of 0.5 gallons per minute per square foot and greater.
[2] Certified for a maximum size of 41" x 36" x 16' (height x width x length).

[1] Model 6 DWC, AquaKnight GC 6 and AquaKnight GC 6S are certified for a minimum daily flow
    of 40,320 gallons per day (28 gallons per minute)										
    Model 8 DWC, AquaKnight GC 8 and AquaKnight GC 8S are certified for a minimum daily flow
    of 72,000 gallons per day (50 gallons per minute)										
    Model 10 DWC, AquaKnight GC 10 and AquaKnight GC 10S are certified for a minimum daily
    flow of 112,320 gallons per day (78 gallons per minute)										
    Model 12 DWC, Model 12-30, Model 12-40, AquaKnight GC 12, AquaKnight GC 12-30,
    AquaKnight GC 12-40, AquaKnight GC 12S, AquaKnight GC 12-30S and AquaKnight GC 12-40S
    are certified for a minimum daily flow of 162,720 gallons per day (113 gallons per
    minute)										
    Model 14 DWC, AquaKnight GC 14 and AquaKnight GC 14S are certified for a minimum daily
    flow of 220,320 gallons per day (153 gallons per minute)
[2] Each system may come in a single tank, dual tank or multiple tank configuration.
[3] These models are certified without carbon therefore no flushing is required.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] Model 6 DWC, AquaKnight GC 6 and AquaKnight GC 6S are certified for a minimum daily flow
    of 40,320 gallons per day (28 gallons per minute)										
    Model 8 DWC, AquaKnight GC 8 and AquaKnight GC 8S are certified for a minimum daily flow
    of 72,000 gallons per day (50 gallons per minute)										
    Model 10 DWC, AquaKnight GC 10 and AquaKnight GC 10S are certified for a minimum daily
    flow of 112,320 gallons per day (78 gallons per minute)										
    Model 12 DWC, Model 12-30, Model 12-40, AquaKnight GC 12, AquaKnight GC 12-30,
    AquaKnight GC 12-40, AquaKnight GC 12S, AquaKnight GC 12-30S and AquaKnight GC 12-40S
    are certified for a minimum daily flow of 162,720 gallons per day (113 gallons per
    minute)										
    Model 14 DWC, AquaKnight GC 14 and AquaKnight GC 14S are certified for a minimum daily
    flow of 220,320 gallons per day (153 gallons per minute)
[2] Each system may come in a single tank, dual tank or multiple tank configuration.
[3] These models are certified without carbon therefore no flushing is required.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] Fan Coil Model: A-CID-X:
    X  - Air flow and Capacity (X can be -3, 4, 6, 8, 10 or 12 )
    3  - 350 CFM and 0.75 Ton capacity
    4  - 450 CFM and 1 ton capacity
    6  - 650 CFM and 1.5 ton capacity
    8  - 850 CFM and 2 ton capacity
    10 - 1000 CFM and 2.5 ton capacity
    12 - 1200 CFM and 3 ton capacity

[1] Only products bearing the NSF Mark are Certified.
[2] Tyton joint connection includes gasket. All other connection types do not include a
    gasket.
[3] Shoe inlet sizes are 4" or 6" mechanical joint (MJ) or flanged for the 4 1/2" hydrant
    and 6" mechanical joint (MJ) or flanged for the 5 1/4" hydrant.
[4] Certification does not include a flange gasket.
[5] Certification includes extensions or buries for the 74, 75, 76, 92, 621, 850, 860, 865,
    950, 960, 2050, 2060 or 2065. Certification includes the fabricated bury only for the
    980 and 985.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[6] Certification includes Bypass Elbows for valves 14" and greater.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] IntegraTec™ XTP 100 is certified for a minimum daily flow of 88,000 L.
    All other models are certified for a minimum daily flow of 18,612 L.
[2] Size is expressed as diameter x length.
[3] The Fiber Repair Kit has been approved for use with these modules.
[4] Also Certified for equivalent metric sizes.
[5] Size:
    IPD-51 Module (8" x 60")
    IPD-77 Module (8" x 80")
    IPD-51XP Module (8" x 60")
    IPD-77XP Module (8" x 80")
    The last number in the model designation refers to the number of modules in the skid.
[6] IntegraTec™ XP 36 ESI requires a pre-service flush of six (6) gallons per minute (gpm)
    for four (4) hours with tap water.
[7] Certified for a minimum daily flow of 44,000 liters per day. 
[8] Flushing Procedure:  The IntegraFlo IC-52XP is flushed for 4 hours at a flow rate of 7
    gallons per minute with de-ionized water.

[1] Follow manufacturers use instructions for backwashing after periods in ''standby'' mode.
    Certification includes modules only.
[2] 4 S10T (Part# 119035) is a 4-pack of four #119005 modules in one box.

[1] Follow manufacturers use instructions for backwashing after periods in ''standby'' mode.
    Certification includes modules only.
[2] 4 S10T (Part# 119035) is a 4-pack of four #119005 modules in one box.
[3] Certified for a minimum daily permeate generation of 8,182 L for use in public water
    treatment facilities.
[4] Product is pre-flushed at 5 gallons per minute for 2 hours with chlorine CIP wash
[5] Certified for a minimum daily flow of 40,200 L.
[6] Certified for a minimum daily flow of 668,160 liters.
[7] Product to be flushed at 160 gpm for 2 hours using Chlorine CIP to sanitize system and
    piping prior to use.
[8] Certified for a minimum daily flow of 1,357,200 liters.
[9] Product to be flushed at 325 gpm for 2 hours using Chlorine CIP to sanitize system and
    piping prior to use.
[10] B40N Module Part # 118182, 118247, 118317, 118329 is certified for a minimum daily
     permeate generation of 9,600 L.
     
     B50N-L Module Part # 118324 is certified for a minimum daily permeate generation of
     12,000 L.
     
     B50N Module Part # 118322 is certified for a minimum daily permeate generation of 12,000
     L.
     
     MBR MemRACK is certified for a minimum daily permeate generation of 9,600 L.
[11] B40N Module Part # 118182, 118247, 118317, 118329 requires a pre-service flush at 14
     liters per minute for 20 minutes using tap or influent* water.
     
     B50N-L Module Part # 118324 and B50N Module Part # 118322 require a pre-service flush at
     17 liters per minute for 20 minutes using tap or influent* water.
     
     *If using influent water for the initial flush, follow the flush by disinfecting with a
     1,000 ppm chlorine (NaOCl) solution for 2 hours followed by a 20 minute flush to waste.
[12] Certified for a minimum daily flow of 80,400 liters per day
[13] Product to be flushed at 10.3 gallon per minute for 2 hours using Chlorine CIP to
     sanitize system and piping prior to use.
[14] Product to be flushed at 20 gallon per minute for 2 hours using Chlorine CIP to sanitize
     system and piping prior to use.
[15] Product is pre-flushed for 2 hours with chlorine CIP wash to sanitize system.
[16] Certified for a minimum of 6,000 liters per day.
[17] Product to be flushed at 1.5 gallons per minute for 2 hours.

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] Naming convention: e-Watercontrol code 10(2)1370(2)(1)			
    (1) 2 digits (characters or numbers) for customization			
    (2) 1 possible character "." for customization
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] All NSF-61 approved products must have the "DW" option code.
[2] 8705[A][B][C][D][E][F][G][H][I][J][K][L][M]
    A - Liner Material: T
    B - Electrode Material: S or H
    C - Electrode Type: A, B, E or F
    D - Line Size: 005, 010, 015, 020, 025, 030, 040, 050, 060, 080, 100, 120, 140, 160,
    180, 200, 240, 300, or 360.  (Where 360 = 36 inches)
    E - Flange Type = any one alpha or digital character
    F - Flange Rating = any one alpha or digital character
    G - Coil Housing Configuration = Any two-digit alpha or numeric characters
    H - Safety Approval = Any zero to two-digit alpha or numeric characters
    I - Submersion Protection = Any zero to three-digit alpha or numeric characters
    J - Grounding Rings:  G1, G2, G5 or G6
    K - Any 0 to 50-digit alpha or numeric characters
    L - Drinking Water Certification: DW
    M - Any 0 to 50-digit alpha or numeric characters
    8705[A][B][C][D][E][F][G][H][I][J][K][L][M]
    A - Liner Material: T
    B - Electrode Material: S or H
    C - Electrode Type: A, B, E or F
    D - Line Size: 005, 010, 015, 020, 025, 030, 040, 050, 060, 080, 100, 120, 140, 160,
    180, 200, 240, 300, or 360.  (Where 360 = 36 inches)
    E - Flange Type = any one alpha or digital character
    F - Flange Rating = any one alpha or digital character
    G - Coil Housing Configuration = Any two-digit alpha or numeric characters
    H - Safety Approval = Any zero to two-digit alpha or numeric characters
    I - Submersion Protection = Any zero to three-digit alpha or numeric characters
    J - Grounding Rings:  G1, G2, G5 or G6
    K - Any 0 to 50-digit alpha or numeric characters
    L - Drinking Water Certification: DW
    M - Any 0 to 50-digit alpha or numeric characters
    
[3] 8711[A][B][C][D][E][F][G][H][I][J][K][L]
    A - Liner Material: S
    B - Electrode Material: S or H
    C - Electrode Type: A, B, E or F
    D - Line Size: 005, 010, 015, 020, 025, 030, 040, 050, 060, or 080.  (Where 080 = 8
    inches)
    E - Transmitter Mount: any one alpha or digital character
    F - Mating Flange = any one alpha or digital character
    G - Safety Approval = Any zero to two-digit alpha or numeric characters
    H - Submersion Protection = Any zero to three-digit alpha or numeric characters
    I - Grounding Rings:  G1, G2, G5 or G6
    J - Any 0 to 50-digit alpha or numeric characters
    K - Drinking Water Certification: DW
    L - Any 0 to 50-digit alpha or numeric characters
    
[4] 8750W[A][B][C][D][E][F][G][H][I][J][K][L][M]
    A - Sensor Design Revision: any one alpha or digital character
    B - Transmitter Class: any one alpha or digital character
    C - Transmitter Power: any one alpha or digital character
    D - Conduit Entries: any one alpha or digital character
    E - Sensor style: any one alpha or digital character
    F - Liner Material: T 
    G - Electrode Material: S or H 
    H - Electrode Type: A, B, E or F 
    I - Line Size: 005, 010, 015, 020, 025, 030, 040, 050, 060, 080, 100, 120, 140, 160,
    180, 200,
    240, 300, 360, or 400.  (Where 400 = 40 inches)
    J - Any 0 to 50-digit alpha or numeric characters
    K - Grounding Rings:  G1, G2, G5 or G6
    L - Drinking Water Certification: DW
    M - Any 0 to 50-digit alpha or numeric characters
    
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements
    for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] All NSF-61 approved products must have the "DW" option code.
[2] 8705 [A][B][C][D][E][F][G][H][I][J][K][L][M]
    A - Liner Material - T (Line sizes - 0.5 inch to 36 inch) or P (Line sizes - 4 inch to 
        36 inch)
    B - Electrode Material - S or H
    C - Electrode Type - A, B, E or F
    D - Line Size - 005**, 010**, 015**, 020**, 025**, 030**, 040, 050, 060, 080, 100, 120, 
        140, 160, 180, 200, 240, 300, or 360.  (Where 360 = 36 inches) (** Line size 
        authorized for only Liner Material -  T)
    E - Flange Type - any one alpha or digital character
    F - Flange Rating - any one alpha or digital character
    G - Coil Housing Configuration - any two-digit alpha or numeric characters
    H - Safety Approval - any zero to two-digit alpha or numeric characters
    I - Submersion Protection - any zero to three-digit alpha or numeric characters
    J - Grounding Rings - G1, G2, G5, G6 or no characters
    K - Additional Options - any 0 to 50-digit alpha or numeric characters
    L - Drinking Water Certification - DW
    M - Additional Options - any 0 to 50-digit alpha or numeric characters
[3] Certification includes electrodes and optional grounding rings made from 316 Stainless
    Steel or Nickel alloy. Certification does not include grounding rings from any other
    material or lining protectors.
[4] 8705[A][B][C][D][E][F][G][H][I][J][K][L][M]
    A - Liner Material - T
    B - Electrode Material - S or H
    C - Electrode Type - A, B, E or F
    D - Line Size - 005, 010, 015, 020, 025, 030, 040, 050, 060, 080, 100, 120, 140, 160, 
        180, 200, 240, 300, or 360.  (Where 360 = 36 inches)
    E - Flange Type - any one alpha or digital character
    F - Flange Rating - any one alpha or digital character
    G - Coil Housing Configuration - any two-digit alpha or numeric characters
    H - Safety Approval - any zero to two-digit alpha or numeric characters
    I - Submersion Protection - any zero to three-digit alpha or numeric characters
    J - Grounding Rings - G1, G2, G5, G6 or no characters
    K - Additional Options - any 0 to 50-digit alpha or numeric characters
    L - Drinking Water Certification - DW
    M - Additional Options - any 0 to 50-digit alpha or numeric characters
[5] 8711 [A][B][C][D][E][F][G][H][I][J][K][L]
    A - Liner Material - S
    B - Electrode Material - S or H
    C - Electrode Type - A, B, E or F
    D - Line Size - 005, 010, 015, 020, 025, 030, 040, 050, 060, or 080. 
        (Where 080 = 8 inches)
    E - Transmitter Mount -  any one alpha or digital character
    F - Mating Flange - any one alpha or digital character
    G - Safety Approval - any zero to two-digit alpha or numeric characters
    H - Submersion Protection - any zero to three-digit alpha or numeric characters
    I - Grounding Rings - G1, G2, G5, G6 or no characters 
    J - Any 0 to 50-digit alpha or numeric characters
    K - Drinking Water Certification - DW
    L - Any 0 to 50-digit alpha or numeric characters
[6] 8711[A][B][C][D][E][F][G][H][I][J][K][L]
    A - Liner Material - S
    B - Electrode Material - S or H
    C - Electrode Type - A, B, E or F
    D - Line Size - 005, 010, 015, 020, 025, 030, 040, 050, 060, or 080.  
        (Where 080 = 8 inches)
    E - Transmitter Mount - any one alpha or digital character
    F - Mating Flange - any one alpha or digital character
    G - Safety Approval - any zero to two-digit alpha or numeric characters
    H - Submersion Protection - any zero to three-digit alpha or numeric characters
    I - Grounding Rings - G1, G2, G5, G6 or no characters 
    J - Any 0 to 50-digit alpha or numeric characters
    K - Drinking Water Certification - DW
    L - Any 0 to 50 - digit alpha or numeric characters
[7] 8750W [A][B][C][D][E][F][G][H][I][J][K][L][M][N][O]
    A - Sensor Design Revision - any one alpha or digital character
    B - Transmitter Class - any one alpha or digital character
    C - Transmitter Mount - any one alpha or digital character
    D - Transmitter Power - any one alpha or digital character
    E - Transmitter Outputs - any one alpha or digital character
    F - Conduit Entries - any one alpha or digital character
    G - Sensor style - any one alpha or digital character
    H - Liner Material - T (Line sizes - 0.5 inch to 48 inch) or P (Line sizes - 4 inch to 
        48 inch)
    I - Electrode Material - S or H
    J - Electrode Type - A, B, E or F
    K - Line Size - 005**, 010**, 015**, 020**, 025**, 030**, 040, 050, 060, 080, 100, 120, 
        140, 160, 180, 200, 240, 300, 360, 400,420, or 480.  (Where 480 = 48 inches) 
        (** Line size authorized for only Liner Material - T)
    L - Flange Type, Flange Rating, Flange Material, Safety Approvals, and Other options - 
        any three to 50-digit alpha or numeric characters
    M - Grounding Rings - G1, G2, G5, G6 or no characters 
    N - Drinking Water Certification - DW
    O - Additional Options - any 0 to 50-digit alpha or numeric characters
[8] 8750W[A][B][C][D][E][F][G][H][I][J][K][L][M][N][O]
    A - Sensor Design Revision - any one alpha or digital character
    B - Transmitter Class - any one alpha or digital character
    C - Transmitter Mount - any one alpha or digital character
    D - Transmitter Power - any one alpha or digital character
    E - Transmitter Outputs - any one alpha or digital character
    F - Conduit Entries - any one alpha or digital character
    G - Sensor style - any one alpha or digital character
    H - Liner Material - T
    I - Electrode Material - S or H 
    J - Electrode Type - A, B, E or F 
    K - Line Size - 005, 010, 015, 020, 025, 030, 040, 050, 060, 080, 100, 120, 140, 160, 
        180, 200,240, 300, 360, 400,420, or 480.  (Where 480 = 48 inches) 
    L - Flange Type, Flange Rating, Flange Material, Safety Approvals, and Other options - 
        Any three to 50-digit alpha or numeric characters
    M - Grounding Rings - G1, G2, G5, G6 or no characters 
    N - Drinking Water Certification - DW
    O - Additional Options - Any 0 to 50-digit alpha or numeric characters
[9] 8705[A][B][C][D][E][F][G][H][I][J][K][L][M]
     A: Liner Material: H
     B: Electrode Material: S or H
     C: Electrode Type: A, B, E or F
     D:  Line Size: 005, 010, 015, 020, 025, 030, 040, 050, 060, 080, 100, 120, 140, 160,
    180, 200, 240, 300, or 360.  (Where 360 = 36 inches)
     E: Flange Type = any one alpha or digital character
     F: Flange Rating = any one alpha or digital character
     G: Coil Housing Configuration = Any two-digit alpha or numeric characters
     H: Safety Approval = Any zero to two-digit alpha or numeric characters
      I: Submersion Protection = Any zero to three-digit alpha or numeric characters
     J: Grounding Rings: G1, G2, G5, G6 or no characters
     K: Additional Options:  Any 0 to 50-digit alpha or numeric characters
     L: Drinking Water Certification: DW
     M: Additional Options:   Any 0 to 50-digit alpha or numeric characters
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.
[10] 8750W[A][B][C][D][E][F][G][H][I][J][K][L][M][N][O]
       A: Sensor Design Revision: any one alpha or digital character
       B: Transmitter Class: any one alpha or digital character
       C: Transmitter Mount: any one alpha or digital character
       D: Transmitter Power: any one alpha or digital character
       E: Transmitter Outputs: any one alpha or digital character
       F:  Conduit Entries: any one alpha or digital character
       G: Sensor style: any one alpha or digital character
       H: Liner Material: H
       I: Electrode Material: S or H 
       J: Electrode Type: A, B, E or F 
       K: Line Size: 005, 010, 015, 020, 025, 030, 040, 050, 060, 080, 100, 120, 140, 160,
     180, 200, 240, 300 or 360.  (Where 360 = 36 inches) 
       L: Flange Type, Flange Rating, Flange Material, Safety Approval
       M: Grounding Rings: G1, G2, G5, G6 or no characters 
       N: Drinking Water Certification: DW
       O: Additional Options:  Any 0 to 50-digit alpha or numeric characters
[11] MS [A][B][C][D][E][F][G][H][I][J][K][L][M]
      A - Line Size - 005, 010, 015, 020, 025, 030, 040, 050, 060, 080, 100, 120,140, 160,
     180, 200, 240, 300, or 360.  (Where 360 = 36 inches)    
      B – Revision level A
      C – Mounting configuration – Remote Mount
      D – Conduit Entries – ½ NPT or M20    
      E - Liner Material - H 
      F - Electrode Material - S or H
      G – Electrode Type- A, B, E or F
      H – Flange Material- any one alpha or digital character
      I - Flange Type - any one alpha or digital character
      J - Flange Rating - any one alpha or digital character
      K - Coil Housing Configuration - any two-digit alpha or numeric characters
      L - Safety Approval - any zero to two-digit alpha or numeric characters
      M – Grounding Rings - G1, G2, G5, G6 or no characters
      N - Drinking Water Certification – DW
      O - Additional Options - any 0 to 50-digit alpha or numeric characters
[PFAS] Complies with US EPA Maximum Contaminant Levels (MCLs) for PFAS according to
      NSF/ANSI/CAN 61.

[1] Only products bearing the NSF Mark on the product, product packaging, and/or
    documentation shipped with the product are Certified.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] The anodes have been evaluated for the following end configurations:
    1) Anode Outlet Devices (AOD), size refers to length of AOD:
       2" regular
       2 1/2" regular
       3" regular
       4" regular
       2" heat trap
       2 1/2" heat trap
       3" heat trap
       4" heat trap
       2" heat trap w/dope
       2 1/2" heat trap w/dope
       3" heat trap w/dope
       4" heat trap w/dope
    2) Threaded Steel Caps (12L14, 1215, Q235A)
[2] The anode material is extruded magnesium.

[1] Also Certified for equivalent metric sizes.
[2] Only products bearing the NSF Mark on the product, product packaging, and/or
    documentation shipped with the product are Certified.
[3] This product may be used in cold (73F/23C) applications.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] Valves have either 2'' FNPT or 2 1/2'' MNPT connections.

[1] Certification of this product has been performed to the health effects requirements of
    NSF/ANSI Standard 61, which assesses the acceptability of potential extractants from the
    chemical generator.  No evaluation has been performed on the strength or efficacy of the
    chemical(s) generated.  As unit operation, maintenance and the consistency of source
    ingredients may affect the performance of the unit, the ensuing chemical(s) is not
    certified by NSF to NSF/ANSI Standard 60.
[2] Certified for a dose rate that yields a maximum chlorine dioxide concentration of 2300
    mg/L or 0.23% into potable water.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] Certification for the Figure 506 Kenflex, Figure 507 MJ (M x F) Patriot II and Figure
    507 MJ (F x F) Patriot II valves include the jack screw and position indicator options.
[2] Certification for the Figure 508 Kenflex, Figure 509 MJ (M x F) Patriot II and Figure
    509 MJ (F x F) Patriot II valves includes the jack screw, position indicator, and coil
    spring options.
[3] Certification includes valves with and without outside levers.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] Certified for use in chemical generators with a 1% or 12-15% sodium hypochlorite
    solution.
[2] Certified for a maximum surface area to volume ratio of 234 square inches per liter.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] The 4040 models are certified for a minimum flow of 250 gallons per day. The 8040 models
    are certified for a minimum flow of 1100 gallons per day. The 8540 models are certified
    for a minimum flow of 1300 gallons per day. Product requires a 1 hour conditioning flush
    with potable water prior to use.
[2] Certified for a minimum daily flow of 2,800 gallons per day.

[1] Ultrafiltration PVDF module MSFUF1070C is flushed for 116 minutes with tap water at a
    rate of 7 gpm.
    Ultrafiltration PVDF module MSFUF1090C is flushed for 150 minutes with tap water at a
    rate of 7 gpm.
    Ultrafiltration PVDF module MSFUF9070C is flushed for 104 minutes with tap water at a
    rate of 7 gpm.
    Ultrafiltration PVDF module MSFUF9090C is flushed for 133 minutes with tap water at a
    rate of 7 gpm.
    Ultrafiltration PVDF module MSFUFG7080 is flushed for 65 minutes with tap water at a
    rate of 7 gpm.
    Ultrafiltration PVDF module MSFUF1070C is flushed for 116 minutes with tap water at a
    rate of 7 gpm.
    Ultrafiltration PVDF module MSFUF1090C is flushed for 150 minutes with tap water at a
    rate of 7 gpm.
    Ultrafiltration PVDF module MSFUF9070C is flushed for 104 minutes with tap water at a
    rate of 7 gpm.
    Ultrafiltration PVDF module MSFUF9090C is flushed for 133 minutes with tap water at a
    rate of 7 gpm.
    Ultrafiltration PVDF module MSFUFG7080 is flushed for 65 minutes with tap water at a
    rate of 7 gpm.
    
    Ultrafiltration PVDF module MSFUF1070C is certified for a minimum daily flow of 42,000
    liters.
    Ultrafiltration PVDF module MSFUF1090C is certified for a minimum daily flow of 54,000
    liters.
    Ultrafiltration PVDF module MSFUF9070C is certified for a minimum daily flow of 37,800
    liters.
    Ultrafiltration PVDF module MSFUF9090C is certified for a minimum daily flow of 48,600
    liters.
    Ultrafiltration PVDF module MSFUFG7080 is certified for a minimum daily flow of 11,000
    Ultrafiltration PVDF module MSFUF1070C is certified for a minimum daily flow of 42,000
    liters.
    Ultrafiltration PVDF module MSFUF1090C is certified for a minimum daily flow of 54,000
    liters.
    Ultrafiltration PVDF module MSFUF9070C is certified for a minimum daily flow of 37,800
    liters.
    Ultrafiltration PVDF module MSFUF9090C is certified for a minimum daily flow of 48,600
    liters.
    Ultrafiltration PVDF module MSFUFG7080 is certified for a minimum daily flow of 11,000
    liters.

[1] Certified for 1 element and 12 element modules.  The 1 element module is Certified for a
    minimum flow of 10,000 L/day.  The 12 element module is Certified for a minimum flow of
    120,000 L/day.

[6] Certification for use with the following chemicals. These products are evaluated by
    diluting the exposed water treatment chemicals to the typical use
    level (TUL), as defined by NSF/ANSI/CAN 60.
    Chemical               %
    Aluminum Sulfate       50
    Ammonium Hydroxide     29
    Ferric Chloride        45
    Fluosilicic Acid       23
    Hydrochloric Acid      28
    Hydrochloric Acid      30
    Hydrochloric Acid      38
    Hydrogen Peroxide      50
    Phosphoric Acid        50
    Potassium Hydroxide*   45
    Potassium Permanganate 10
    Sodium Bisulfite       44
    Sodium Hydroxide*      50
    Sodium Hypochlorite    12.5
    Sodium Hypochlorite    15
    * These chemicals are not compatible with the 35-gallon tank.
    Certification does not include any tank accessories.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] Certified for use in tanks that are 2000 gallons or greater.  Certification does not
    include use in the transmission line.
[2] Certified for use with up to 25% lime slurry (CaOH2) with a maximum use level of 650
    mg/L.

[8] Certified for a minimum daily flow of 11,520 liters.  Product requires a 7 gpm flush
    with tap water for 15 minutes before use.

[1] Certified for a minimum daily flow of 10,000 L/day.
    Y - Length Code
        3   - 3 meter (132")
        4.5 - 4.5 meter (193")
        6   - 6 meter (256")
[2] Certified for a minimum daily flow of 1,152,000 L for use in public water treatment
    facilities.
    
    XX - PSI rating:
         15 - 150 PSI
         30 - 300 PSI
    
    YY - Length code:
    
         150 PSI model (XX = 15)
         40 - 47"
         60 - 67"
    
         300 PSI model (XX = 30)
         60 - 67"
[3] XX or XXX - PSI rating
                15  - 150
                30  - 300
                45  - 450
                60  - 600
                100 - 1000
                120 - 1200
[4] Certified for a minimum flow of 20,000 L/day.
    XX or XXX - PSI rating:
    30 = 300 PSI
    45 = 450 PSI
    60 = 600 PSI
    100 = 1000 PSI
    120 = 1200 PSI
    
    Y = length code 
                 300 PSI   450/600 PSI   1000/1200 PSI 
    1 = 1 meter 		(55”) 		(56'') 		    	(58'') 
    2 = 2 meters 		(95'') 		(96'') 			  (98") 
    3 = 3 meters 		(135") 		(136'') 		    	(138'') 
    4 = 4 meters 		(175'') 		(176") 		  	(178") 
    5 = 5 meters 		(215'') 		(216'') 			(218")
    6 = 6 meters		(255'') 		(256'')		   	(258'') 
    7 = 7 meters 		(295'') 		(296'') 			(298'') 
    8 = 8 meters 		(335") 		(336'') 		    	(338'')
[5] Certified for a minimum flow of 20,000 L/day.
    Y - Length code
        1 - 1 meter (57")
        2 - 2 meters (97")
        3 - 3 meters (137")
        4 - 4 meters (177")
        5 - 5 meters (217")
        6 - 6 meters (257")
        7 - 7 meters (297")
        8 - 8 meters (337")
[6] Product also complies with NSF/ANSI 372.
[7] XX - PSI rating: 
         30 - 300 
         45 - 450 
         60 - 600 
    Y - length code: 
        1 - 1 meter (49")
        2 - 2 meters (89") 
        3 - 3 meters (129") 
        4 - 4 meters (169") 
        5 - 5 meters (209") 
        6 - 6 meters (249")
[8] Certified for a minimum flow of 20,000 L/day.
        3 - 3 meters (135")
        6 - 6 meters (255")
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] NSF has not conducted production control audits at this facility. Product Listing is
    based on type testing [ISO/IEC Guide 2: 1996(E/F/R) 14.5].
[2] (1) Media
           None - Extractables free polypropylene
           RO - Reverse osmosis
    (2) Length
          10 - 10"
          20 - 20"
          30 - 30"
          40 - 40"
          50 - 50"
    (3) Variation in length
          A - Specified length
          None - Nominal length
          Custom lengths are available from 10" to 72"
    (4) Micron rating (nominal)
          1 micron
          5 microns
          10 microns
          20 microns
          40 microns
          80 microns
          Custom micron rating available from 1 micron to 100 microns.
    (5) Outer diameter (mm)
          A - 63.5
          D - 100
          E - 60
         J - 114.5
         Custom outer diameters available from 55 mm to 155 mm.
    (6) End adapters
          E222 - Double 222 o-rings end cap
          E222/C - Two end caps, one with double 222 o-rings, other end flat closed
          EA - Spring end
          EF - Fin end
          EC - Closed end cap
          ER - Reusable stainless steel spring
          ES - Stepped end
          X - Extended core
         XT - Tapered extended core (all core media)
         None - No end adapters (double open end - DOE)
    (7) Core material
          S - Stainless steel 304/316L
         None - 100% polypropylene
    (8) Inner diameter (mm)
          27mm
          35mm
         Customer inner diameters are available in metal cores.
    Only cartridges 10" and longer have been reviewed and evaluated
[3] Only cartridges 10" and longer have been reviewed and evaluated for Standard 61. This
    product has not been reviewed or evaluated for point-of-use or point-of-entry
    applications.
[4] Super Fine Filter Cartridges PPF-(1)-(2)-(3)-(4) is denoted as follows:
    (1) Length in mm (254 – 1778)
    (2) Outer diameter in mm (50 – 150)
    (3) Weight in grams
    (4) Profile:
          P - Plain
          L - Lined
          G - Grooved
          D - Dotted
    Micron rating - available from 1 µm to 100 µm
    Inner Diameter (mm) – 28 mm – 29 mm

[1] Certified for a minimum daily flow of 81,765 liters.
[2] Series 4700 includes the following:
    Model 4700: Water Lubricated Deep Well Pump
    Model 4705: Transfer Pump (Liquid Lock, Seal or Packed)
    Model 4770: Oil Lubricated Deep Well Pump
    Model 4771: SST - Superstandard Turbines
    Model 4772: Product Lubricated Pump with "T" Discharge Head
    Model 4773: Product Lubricated Pump with "G" Discharge Head
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] Only products bearing the NSF Mark are NSF Certified.
[2] Certified for a minimum daily flow of 5,450 liters.

[3] Certified for a minimum flow of 25 gallons per day.
[4] The numbers in parentheses represent the following for
    8-(1)-(2)-(3)-(4)-(5)-FG-S-PB-(6)-C:
    (1) Housing Size:
        15" - 15"
        30" – 30"
    (2) Pipe size, NPT and Flanged:
        3/4P   - 3/4" female NPT
        1P     - 1" female NPT
        1-1/4P - 1 1/4" female NPT
        1-1/2P - 1 1/2" female NPT
        2P     - 2" female NPT
        3P     - 3" female NPT
        3/4F   - 3/4" 150 class ANSI flange
        1F     - 1" 150 class ANSI flange
        1-1/4F - 1 1/4" 150 class ANSI flange
        1-1/2F - 1 1/2" 150 class ANSI flange
        2F     - 2" 150 class ANSI flange
        3F     - 3" 150 class ANSI flange
        4F     - 4" 150 class ANSI flange
        6F     - 6" 150 class ANSI flange
    (3) Outlet Style:
        1 - Bottom
        2 - Side
        3 - Bottom Elbow
    (4) Pressure Rating:
        150 - 150 psi (NPT or flanged)
        300 - 300 psi (NPT or flanged)
    (5) Housing Material:
        S    - 304 stainless steel
        S316 - 316 stainless steel
    (6) Optional Displacer
        D – Displacer present
    STANDARD CODES:
        FG - Cover seal
        S  - Basket seal is required
        PB - Basket type (filter basket, 964 perforations)
        C  - ASME code stamp
[5] The numbers in parentheses represent the following for Model
    8-(1)-(2)-(3)-(4)-(5)-E-S-PB-D-C:
    (1) Housing Style:
        No Symbol - Standard (std)
        SLP       - Standard low profile
        QII       - Quick access cover
        HLP       - Hinged low profile
    (2) Model:
        16 - Model 16
        18 - Model 18
        22 - Model 22
        24 - Model 24
        30 - Model 30
        36 - Model 36
        42 - Model 42
        48 - Model 48
    (3) Basket Depth:
        15 - 15"
        30 - 30"
    (4) Pipe Size (Flanged):
        2F  - 2"
        3F  - 3"
        4F  - 4"
        6F  - 6"
        8F  - 8"
        10F - 10"
        12F - 12"
    (5) Outlet Style:
        1 - In-line, bottom
        2 - Side inlet/outlet
        3 - Side inlet/outlet/same side
    (6) Optional Displacer
        D – Displacer present
    STANDARD CODES:
        E  - Cover seal
        S  - Basket seal is required
        PB - Basket type (filter basket, 964 perforations)
        C  - ASME code stamp

[1] All NSF-61 approved products must have the "DW" option code.
[2] Certification applies to 316LSS water contact components only.
[3] Certified for 1/4 - 18 NPT Process Connection and G 1/2 DIN 16288.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] Certification of this product has been performed to the health effects requirements of
    NSF/ANSI Standard 61, which assesses the acceptability of potential extractants  from
    the chemical feeder when used with the manufacturer's recommended use chemicals.  Any
    modifications including the use of chemicals other than those recommended by the
    manufacturer or chemicals that are not compliant to NSF/ANSI Standard 60 will void the
    NSF certification for this feeder. 
[2] Certified for use with Provichlor TAB 3 tablets when used in compliance with their
    NSF/ANSI Standard 60 Listing. 
[3] Certified for a minimum of 28,800 liters of water treated per day.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] NSF has not conducted production control audits at this facility.  Product Listing is
    based on type testing [ISO/IEC Guide 2: 1996(E/F/R) 14.5].
[2] (1) Media
        None - Extractables free polypropylene
        RO   - Reverse osmosis
    (2) Length
        10 - 10"
        20 - 20"
        30 - 30"
        40 - 40"
        50 - 50"
    (3) Variation in length
        A    - Specified length
        None - Nominal length
        Custom lengths are available from 10" to 72"
    (4) Micron rating (nominal)
        1 micron
        5 microns
        10 microns
        20 microns
        40 microns
        80 microns
        Custom micron rating available from 1 micron to 100 microns.
    (5) Outer diameter (mm)
        A - 63.5
        D - 100
        E - 60
        J - 114.5
        Custom outer diameters available from 55 mm to 155 mm.
    (6) End adapters
        E222   - Double 222 o-rings end cap
        E222/C - Two end caps, one with double 222 o-rings, other end flat closed
        EA     - Spring end
        EF     - Fin end
        EC     - Closed end cap
        ER     - Reusable stainless steel spring
        ES     - Stepped end
        X      - Extended core
        XT     - Tapered extended core (all core media)
        None   - No end adapters (double open end - DOE)
    (7) Core material
        S    - Stainless steel 304/316L
        None - 100% polypropylene
    (8) Inner diameter (mm)
        27mm
        35mm
        Customer inner diameters are available in metal cores.
[3] Only cartridges 10" and longer have been reviewed and evaluated for Standard 61.  This
    product has not been reviewed or evaluated for point-of-use or point-of-entry
    applications.
[4] Super Fine Filter Cartridges PPF-(1)-(2)-(3)-(4) is denoted as follows:
    (1) Length in mm (254 – 1778)
    (2) Outer diameter in mm (50 – 150)
    (3) Weight in grams
    (4) Profile:
        P - Plain
        L - Lined
        G - Grooved
        D - Dotted
    Micron rating - available from 1 µm to 100 µm
    Inner Diameter (mm) – 28 mm – 29 mm

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[5] Certified for a minimum daily flow of 11,520 liters.
[6] Product requires a 7 gpm flush with tap water for 15 minutes before use.

[1] AR204, CR64, CR67 and AR908 are certified for a minimum flow of 60,000 gallons per day
    when used in the EDR-STACK, MK4 and 30,000 gallons per day when used in the EDR-STACK,
    V20. 
[2] AR404 Coated Electrode are certified for a minimum flow of 30,000 gallons per day and
    used in EDR-STACK, V20 and EDR-STACK, MK4
[3] NFEDR AR908 Coated Electrode are certified for a minimum flow of 60,000 gallons per day
    and used in trade name EDR-STACK, MK4 
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[5] Certified for a minimum daily flow of 5,000 liters per day.  Flush for 2.5-5 gpm for 7.5
    - 15 hours.
[6] Certification based on minimum daily flow of 8,000 liters per module.
[7] Certification based on minimum daily flow of 11,000 liters per module.
[8] Certification based on minimum daily flow of 4,000 liters per module.
[9] Certification based on minimum daily flow of 5,000 liters per day per module.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.
[10] Certification based on minimum daily permeate flow of 12,000 liters per module.
[11] Certification based on minimum daily flow when in operation of 12,000 liters per module.
[12] Size is expressed as diameter x length.
[13] Certification based on minimum daily flow of 25,000 liters per module.
[14] Modules should be flushed for 30 minutes with tap water at 10 gallons per minute.
[15] The ZW700B-450 model is Certified for a minimum daily flow of 3,180 L.				
     The ZW700B-4100 model is Certified for a minimum daily flow of 6,960 L.				
     The ZW700B-4150 model is Certified for a minimum daily flow of 10,800 L.				
     The ZW700B-6100 model is Certified for a minimum daily flow of 14,400 L.				
     The ZW700B-8060/X model is Certified for a minimum daily flow of 16,000 L.				
     The ZW700B-9060 model is Certified for a minimum daily flow of 22,000 L. 				
     The ZW700B-10060 model is Certified for a minimum daily flow of 24,000 L.
[16] Flush the models under the following conditions:			
     ZW700B-450 for 30 minutes at a flow rate of 5,168 liters per minute using tap water.
     ZW700B-4100 for 30 minutes at a flow rate of 11,310 liters per minutes using tap water.
     				
     ZW700B-4150 for 30 minutes at a flow rate of 17,550 liters per minutes using tap water.
     				
     ZW700B-6100 for 30 minutes at a flow rate of 23,400 liters per minutes using tap water.
     				
     ZW700B-8060/X for 75 minutes at a flow rate of 35-53 liters per minutes using tap water.
     				
     ZW700B-9060 for 75 minutes at a flow rate of 35-53 liters per minutes using tap water.
     ZW700B-10060 for 60 minutes at a flow rate of 50-80 liters per minute using raw feed
     water.
[17] ZW700B-RMS is certified to a minimum daily flow of 34,000 liters per day.
[18] ZW700B-RMS is flushed for 80 minutes at a flow rate of 70-116 liters per minute using
     raw feed water.
[19] ZW and ZeeWeed are interchangeable and denote the same model. 

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] Certified for the following configurations:
    87845, 1/2"
    87850, 3/4"
[2] Certified for the following configurations:
    87920, 1/2"
    87925, 3/4"
    87930, 1"
    87935, 1 1/4"
    87940, 1 1/2"
    87945, 2"
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] Certified for the following configurations:
         87660, 2 1/2"
         87665, 3"
         87670, 4"
[2] Certified for the following configurations:
         87675, 2 1/2"
         87680, 3"
         87685, 4"
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] Certified for the following configurations:
    82100, P x P, 1/2" U
    82105, P x P, 1/2" L
    82110, P x P, 1/2" S
    82115, P x P, 3/4"
    82120, P x P, 1"
    82125, P x P, 1-1/4"
    82130, P x P, 1-1/2"
    82135, P x P, 2"
[2] Certified for the following configurations:
    87230, 1/2"
    87235, 3/4" 
    87240, 1" 
    87245, 1 1/4" 
    87250, 1 1/2"
    87255, 2"
[3] Certified for the following configurations:
    78300, 2 1/2"
    78305, 3"
    78310, 4"
[4] Certified for the following configurations:
    87260, 2 1/2"
    87265, 3"
    87270, 4"
[5] Certified for the following configurations:
    87170, 1/2"
    87175, 3/4"
    87180, 1"
    87185, 1 1/4"
    87190, 1 1/2"
    87195, 2"
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] Certified for the following configurations:
      86960, 2 1/2"
      86965, 3"
      86970, 4"
[2] Certified for the following configurations:
      86975, 2 1/2"
      86980, 3"
      86985, 4"
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] Only products bearing the NSF Mark on the product, product packaging, and/or
    documentation shipped with the product are Certified.
[2] Certified for installation on pipes 1/4" - 300" in diameter.
[3] Certified for installation on pipes 1" - 120" in diameter. Certified product does not
    include ports, injection nozzles or gaskets.

[1] Certification of this product has been performed to the health effects requirements of
    NSF/ANSI/CAN 61, which assesses the acceptability of potential extractants from the
    chemical feeder when used with the manufacturer's recommended use chemicals.  Any
    modifications including the use of chemicals other than those recommended by the
    manufacturer and chemicals that are not compliant to NSF/ANSI/CAN 60 will void the NSF
    Certification for this feeder.
[2] Certified for a minimum daily flow of 21,800 L.
[3] Product was evaluated and Certified based upon dosing of water at 5ppm
    chlorine residual.  Certified for a minimum daily flow of 27,000 L per day.

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.