NSF Product and Service Listings

[1] Product also complies with NSF/ANSI 372.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] Product also complies with NSF/ANSI 372.
[2] Suffixes:
    blank 
    B   - Buried 
    EX  - Base extension 
    MP  - Mounted pump 
    P   - Pipe mounted 
    PST - Pump system tank
    S
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] Only products bearing the NSF Mark on the product, product packaging, and/or
    documentation shipped with the product are Certified.
[2] Certified for mechanical seals for use with pump shafts ranging from 1" - 12" in
    diameter.  Certified for equivalent metric sizes.
[3] Certified for use as a packing material in pumps with shaft diameters >= 0.625".
[4] Certified for mechanical seals for use with pump shafts ranging from 16-110 mm in
    diameter.
[5] Certified for mechanical seals for use with pump shafts ranging from 1"-8" in diameter.
    Certified
    for equivalent metric sizes.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] Size is expressed as Diameter x length.
[2] BW-8040 and ULP-8040 models are Certified for a minimum daily flow of 10000 gallons.
    BW-4040 model is Certified for a minimum daily flow of 2400 gallons.
    ULP-4040 model is Certified for a minimum daily flow of 2600 gallons.
    ULP-4040MR model is Certified for a minimum daily flow of 2200 gallons.
    ULP-4040HR model is Certified for a minimum daily flow of 1800 gallons.
    ULP-4021 model is Certified for a minimum daily flow of 950 gallons.
[3] Models require the following flushing procedure:
    BW-4040, ULP-4040, ULP-4040MR, ULP-4040HR and ULP-4021 require a 4 gpm flush for 24
    hours using tap water.
    BW-8040 and ULP-8040 require a 15 gpm flush for 24 hours using tap water.

[1] Certified for equivalent metric sizes.
[2] YY - 02 through 48
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] For all meters:
    X - Type of electronics	
        4 - AquaMaster	
        5 - WaterMaster
        6 - ProcessMaster		
    Y - Tier of Electronics	
        1 - Standard Electronics
        2 - Enhanced Electronic
        3 - Advanced Electronics	
        5 - Premium Electronics	
    Z - Type of mounting	
        1 - Integral with transmitter
        2 - Remote with transmitter (Sensor + Transmitter)
        8 - Sensor only	
    Type of bore and liner	
        F - FEF/Full bore/Rubber liner
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] FEW XYZ A
    X - Type of electronics
        4 - AquaMaster
        5 - WaterMaster
    Y - Tier of Electronics
        1 - Standard Electronics
        2 - Enhanced Electronics
        3 - Advanced Electronics
        5 - Premium Electronics
    Z - Type of mounting
        1 - Integral with transmitter
        2 - Remote with transmitter (Sensor + Transmitter)
        8 - Sensor only

[2] For all meters:
    X - Type of electronics
        4 - AquaMaster
        5 - WaterMaster
        6 - ProcessMaster
    Y - Tier of Electronics
        1 - Standard Electronics
        2 - Enhanced Electronic
        3 - Advanced Electronics
        5 - Premium Electronics
    Z - Type of mounting
        1 - Integral with transmitter
        2 - Remote with transmitter (Sensor + Transmitter)
        8 - Sensor only
    Type of bore and liner:
    F - FEF/Full bore/Rubber liner
[3] For all meters:
        X - Type of electronics
            4 - AquaMaster
            5 - WaterMaster
        Y - Tier of Electronics
            1 - Standard Electronics
            2 - Enhanced Electronics
            3 - Advanced Electronics
            5 - Premium Electronics
        Z - Type of mounting
              1 - Integral with transmitter			
            2 - Remote with transmitter (Sensor + Transmitter)			
            8 – Sensor Only			
    
    Type of bore and liner:
    V – FEV/Optimized bore/PP liner
[4] For all meters:
        X - Type of electronics
            4 - AquaMaster
            5 - WaterMaster
        Y - Tier of Electronics
            1 - Standard Electronics
            2 - Enhanced Electronics
            3 - Advanced Electronics
            5 - Premium Electronics
        Z - Type of mounting
            1 - Integral with transmitter
            2 - Remote with transmitter (Sensor + Transmitter)
            8 – Sensor Only
    
        Type of bore and liner:
        F - FEF/Full bore/Rubber liner
        R - FER/Reduced bore/Rubber liner
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] The following part numbers, configurations and sizes are Certified.  All manifolds are
    72" long (unless otherwise noted) and may be cut to the desired length.
    
    Copper Manifolds with Copper Ports:
    
    Pipe run 1", 1 1/4", 1 1/2" or 2" with 24 1/2", 3/4", or 1" copper outlets on 3" CTRS.
    
    CC1005024 1 X 1/2 CU
    CC1255024 1 1/4 X 1/2 CU
    CC1251024 1 1/4 X 1 CU
    CC1505024 1 1/2 X 1/2 CU
    CC1501024 1 1/2 X 1 CU
    CC2005024 2 X 1/2 CU
    CC1007524 1 X 3/4 CU
    CC1257524 1 1/4 X 3/4 CU
    CC1507524 1 1/2 X 3/4 CU
    CC2007524 2 X 3/4 CU
    CC2001024 2 X 1 CU
    
    Pipe run 1", 1 1/4", 1 1/2" or 2" with 18 1/2", 3/4", or 1" copper outlets on 4" CTRS
    
    CC1005018 1 X 1/2 CU
    CC1255018 1 1/4 X 1/2 CU
    CC1505018 1 1/2 X 1/2 CU
    CC2005018 2 X 1/2 CU
    CC1007518 1 X 3/4 CU
    CC1257518 1 1/4 X 3/4 CU
    CC1507518 1 1/2 X 3/4 CU
    CC2007518 2 X 3/4 CU
    CC1251018 1 1/4 X 1 CU
    CC1501018 1 1/2 X 1 CU
    CC2001018 2 X 1 CU
    
    Pipe run 1", 1 1/4", 1 1/2" or 2" with 12 1/2", 3/4", or 1" copper outlets on 6" CTRS.
    
    CC1005012ER 1 X 1/2 CU
    CC1255012ER 1 1/4 X 1/2 CU
    CC1505012ER 1 1/2 X 1/2 CU
    CC2005012ER 2 X 1/2 CU
    CC1007512ER 1 X 3/4 CU
    CC1257512ER 1 1/4 X 3/4 CU
    CC1507512ER 1 1/2 X 3/4 CU
    CC2007512ER 2 X 3/4 CU
    CC1251012ER 1 1/4 X 1 CU
    CC1501012ER 1 1/2 X 1 CU
    CC2001012ER 2 X 1 CU
    
    Pipe run 62" long, 1" with 30 1/2" copper outlets on 2" CTRS.
    
    CC1005030 1 X 1/2 CU
    
    Compact Headers - Pipe run 1" with 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, or 12 1/2" copper
    outlets on 1 1/2" CTRS.
    
    CC1005002 1 X 1/2 CU
    CC1005003 1 X 1/2 CU
    CC1005004 1 X 1/2 CU
    CC1005005 1 X 1/2 CU
    CC1005006 1 X 1/2 CU
    CC1005007 1 X 1/2 CU
    CC1005008 1 X 1/2 CU
    CC1005009 1 X 1/2 CU
    CC1005010 1 X 1/2 CU
    CC1005011 1 X 1/2 CU
    CC1005012 1 X 1/2 CU
    
    Speedy Copper Headers - closed one end and reduced 3/4" female sweat the other end.
    
    SC1005002RC 1 X 1/2 CU
    SC1005003RC 1 X 1/2 CU
    SC1005004RC 1 X 1/2 CU
    SC1005005RC 1 X 1/2 CU
    SC1005006RC 1 X 1/2 CU
    SC1005007RC 1 X 1/2 CU
    SC1005008RC 1 X 1/2 CU
    SC1005009RC 1 X 1/2 CU
    SC1005010RC 1 X 1/2 CU
    SC1005011RC 1 X 1/2 CU
    SC1005012RC 1 X 1/2 CU
    
    Speedy Copper Headers - closed one end and 1" plain the other end.
    
    SC1005002PL 1 X 1/2 CU
    SC1005003PL 1 X 1/2 CU
    SC1005004PL 1 X 1/2 CU
    SC1005005PL 1 X 1/2 CU
    SC1005006PL 1 X 1/2 CU
    SC1005007PL 1 X 1/2 CU
    SC1005008PL 1 X 1/2 CU
    SC1005009PL 1 X 1/2 CU
    SC1005010PL 1 X 1/2 CU
    SC1005011PL 1 X 1/2 CU
    SC1005012PL 1 X 1/2 CU
    
    Copper Manifolds with PEX Valves:
    
    Type L Copper Manifold with a Lead Free PEX Valve
    1", 1 1/4", 1 1/2", and 2" Copper Headers with 1/2" Lead Free PEX Valves on 3" Center
    
    CX1005024V-LF 1" x 1/2" Copper outlets with a 1/2" Lead free PEX Valve
    CX1255024V-LF 1 1/4" x 1/2" Copper outlets with a 1/2" Lead free PEX Valve
    CX1505024V-LF 1 1/2" x 1/2" Copper outlets with a 1/2" Lead free PEX Valve
    CX2005024V-LF 2" x 1/2" Copper outlets with a 1/2" Lead free PEX Valve
    
    1" or 1 1/4" Copper Header with 2-12 1/2" Lead Free PEX Valves on 2" Centers
    CVP1005002-LF
    CVP1005003-LF
    CVP1005004-LF
    CVP1005005-LF
    CVP1005006-LF
    CVP1005007-LF
    CVP1005008-LF
    CVP1005009-LF
    CVP1005010-LF
    CVP1005011-LF
    CVP1005012-LF
    CVP1255002-LF
    CVP1255002-LF
    CVP1255003-LF
    CVP1255004-LF
    CVP1255005-LF
    CVP1255006-LF
    CVP1255007-LF
    CVP1255008-LF
    CVP1255009-LF
    CVP1255010-LF
    CVP1255011-LF
    CVP1255012-LF
    

[1] Certified for a minimum daily flow of 2000 gallons.
[2] Product requires flushing with deionized water at 2.628 liters per minute for 1 hour
    prior to use.

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] XX: DIN connector options	
    20 - 20 cable DIN	
    35 - 35 conduit DIN	
    40 - 40 cord DIN	
    	
    yyy:	
    038 - 3/8" NPT	
    012 - 1/2" NPT	
    034 - 3/4" NPT	
    100 - 1" NPT	
    125 - 1 1/4" NPT	
    150 - 1 1/2" NPT	
    200 - 2" NPT	
    	
    	
    zz:	
    11 - Dn11,5 G 3/8"	
    13 - Dn13,5 G 1/2"	
    13 - Dn13,5 G 3/4"	
    18 - Dn18 G 3/4"	
    26 - Dn26 G 1"	
    32 - Dn32 G 1 1/4"	
    45 - Dn45 G 1 1/2"	
    50 - Dn50 G 2"	
    	
    E: EPDM	
    	
    ww: Represents the series coil and may be any alphanumeric character
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] Certified for a minimum daily flow 40,000 liters (AKUALYS ASM), 80,000 (AKUALYS AGM),
    86,400 liters (AKUALYS APM 80T)and 90,000 liters (AKUALYS APM 80)and 97,200 liters
    (AKUALYS APM 90T).
[2] Membranes should be flushed with tap water before being placed into service at the
    following rates:
    AKUALYS ASM at 25 liters per minute for 240 minutes.
    AKUALYS AGM at 50 liters per minute for 240 minutes.
    AKUALYS APM at 57 liters per minute for 240 minutes.
    AKUALYS APM 80T at 60 liters per minute for 240 minutes.
    AKUALYS APM 90T at 68 liters per minute for 240 minutes.

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] XX:Length
    10 = 10"
    20 = 20"
    30 = 30"
    40 = 40"
    50 = 50"
    60 = 60"
    70 = 70"
    
    YY: Pore Size
    1=1 m
    2=2 m
    3=3 m
    5=5 m
    7=7 m
    10=10 m
    15=15 m
    20=20 m
    25=25 m
    30=30 m
    40=40 m
    50=50 m
    
    10" models are certified for a minimum daily permeate generation of 1,000 liters for use
    in public water treatment facilities. 
    20" models are certified for a minimum daily permeate generation of 2,000 liters for use
    in public water treatment facilities. 
    30" models are certified for a minimum daily permeate generation of 3,000 liters for use
    in public water treatment facilities.
    40" models are certified for a minimum daily permeate generation of 4,000 liters for use
    in public water treatment facilities. 
    50" models are certified for a minimum daily permeate generation of 5,000 liters for use
    in public water treatment facilities. 
    60" models are certified for a minimum daily permeate generation of 6,000 liters for use
    in public water treatment facilities. 
    70" models are certified for a minimum daily permeate generation of 7,000 liters for use
    in public water treatment facilities.

[1] Certification of this product has been performed to the health effects requirements of
    NSF/ANSI/CAN 61, which assesses the acceptability of potential extractants from the
    chemical feeder when used with the manufacturer's recommended use chemicals. Any
    modifications including the use of chemicals other than those recommended by the
    manufacturer and chemicals that are not compliant to NSF/ANSI/CAN 60 will void the NSF
    Certification for this feeder.
[2] Horizon PCF-60 is Certified for a maximum 0.2% calcium hypochlorite solution added to
    drinking water to effect a maximum use level (MUL) of 10 ppm total chlorine, with a
    minimum of 47,500 gallons of water treated per day.
[3] Horizon PTF-60, Horizon PTF-100, and Horizon PTF-250 are Certified for a maximum 0.11%
    trichloroisocyanurate solution added to drinking water to effect a maximum use level
    (MUL) of 10 ppm total chlorine, with a minimum of 18,000 gallons of water treated per
    day.

[1] AVK Order Codes for XX:
    Ductile Iron Hydrants
    
    10 - 2 x Hose + 1 x Pumper outlets, flanged with 4" ANSI B16.42 Monitor Flange drilled 
         to ANSI B16.42 Class 150
    20 - 1 x Hose + 2 x Pumper outlets, flanged.
    23 - 1 x Hose + 2 x Pumper outlets, flanged with San Diego drilling
    30 - 1 x Hose + 1 x Pumper outlet, with 6" NPT thread, UL
    40 - 1 x Hose + 1 x Pumper outlet, flanged, UL
    60 - 1 x Hose + 1 x Pumper outlet, with 6" NPT thread, UL and FM
    70 - 1 x Hose + 1 x Pumper outlet, flanged, UL and FM
    72 - EBMUD Hydrant
    73 - 1 x Hose + 1 x Pumper outlet, flanged, UL and FM, San Diego drilling
    74 - 1 x Hose + 1 x Pumper outlet, flanged, UL (FM removed)
    75 - 1 x Hose + 1 x Pumper outlet, flanged, UL (FM removed, San Diego drilling)
    76 - EBMUD Hydrant with San Diego drilling
    87 - 2 x Threaded hose + 1 Threaded pumper outlet, UL and FM, San Diego Drilling
    90 - 2 x Hose + 1 x Pumper outlet, flanged, UL and FM
    91 - Three outlets (2 x 2 1/2" - 1 x 4”/4 1/2")
    92 - 2 x Treaded hose + 1 Threaded pumper outlet, UL and FM
    93 - 2 x Hose + 1 x Pumper outlet, flanged, UL and FM, San Diego drilling
    94 - 2 x Hose + 1 x Pumper outlet, flanged, UL (FM removed)
    95 - 2 x Hose + 1 x Pumper outlet, flanged, UL (FM removed, San Diego drilling)
    96 - 2 x Hose + 1 x Pumper outlet, UL and FM, ANSI B16.1 Class 125 drilling
    
    Stainless Steel Hydrants
    
    42 - Stainless steel 1 x Hose + 1 x pumper
    43 - Stainless steel 1 x Hose + 1 x pumper, flanged with San Diego drilling
    44 - Stainless steel 1 x Hose + 1 x pumper, flanged with 8 bolt drilling to 
         ANSI B16.1, class 125
    50 - 2 x Hose + 1 x Pumper outlet, flanged, UL and FM
    52 - Stainless steel 2 x Hose + 1 x pumper.
    53 - Stainless steel 2 x Hose + 1 x pumper, flanged with San Diego drilling
    54 - Stainless steel 2 x Hose + 1 x pumper, flanged with 8 bolt drilling to 
         ANSI B16.1, class 125
    
    Certified hydrants use NBR valve discs and o-rings.
    
    Acceptable order codes for interior coating are 00, 01, 03, 08, 13, 29 and 53.
[2] XX refers to non-wetted characteristics of the hydrant and may be any value.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] Trend and Pacer models are certified with the following optional end connections:
     - 4 inch mechanical joint
     - 6 inch mechanical joint
     - 6 inch mechanical joint for Dallas, Texas
     - 6 inch Class B mechanical joint
     - 8 inch mechanical joint
     - 6 inch flanged
     - 6 inch flanged with 2 inch NPT pipe plugs
     - 6 inch Tyton 
     - 6 inch plain end
     - 6 inch PVC
     - 6 inch vertical entry
     - 6 inch vertical entry for Traverse City TVC5
     - 6 inch ALPHA
     - 6 inch ALPHA XL
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] Certified for a minimum daily flow of 116,000 L. Certification includes only the open
    lineshaft configuration.
[2] AA - Size of pump in inches (6" - 42")
    BB - Pump model (D, G, H, I, J, K, L, M, N, W, X, Y, Z, EH, HH)
    CC - Impeller design (C)
    DD - Number of stages (1-48)
    ["C" impeller design indicates "enclosed"]
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] X - Valve pattern
        Blank - Straight
        N - N pattern
        Z - Z pattern
    YY - Backflow shutoff designation where 2 per units may be mixed like NRS x PIV 
         BFG  - Butterfly valve
         DNRS - Domestic non-rising stem gate
         DOSY - Domestic outside stem and yoke gate
         DPIV - Domestic post indicator gate
         NRS  - Non-rising stem gate
         OSY  - Outside stem and yoke gate
         PIV  - Post indicator gate
         QT   - Quarter turn ball valve
    ZZ - Inlet and outlet connections
         Blank - Flange by flange
         FxG - Flange by groove 
         GxF - Groove by flange
         GxG - Groove by groove
    TT - Strainer options
         Blank - No strainer
         S - 77F-DI-FDA-125 strainer
         S - SS Stainless Strainer 8000F
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] YY			
    LBV   - Supplied without shut-off valves		
    Blank - Supplied with shut-off valves					
    ZZ - Any Combination of the following:		
         Blank - Standard unit		
         BC - Brass Cap		
         CT (or C&T) - Cap and teather
         FP - Gear Operated Ball Valve		
         LH - Locking Handles		
         S  - Strainer (LF777SI)		
         SH - Stainless handles		
         Z3 - Stainless handles and nuts		
         Z4 - Non-removable handles		
         Z5 - Special dipped test cock adapter
[2] Products may include one or more of the following prefixes or suffixes:
    S              - Lead Free Strainer
    LF (as prefix) - Lead free
    LF (as suffix) - Less fitting
    QT             - Quarter turn ball valve
    Options for non-wetted:
    C & T - Cap and tether test cock covers
    LH    - Locking handled ball valves
    SH    - Stainless handled ball valves
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] The filtration level (micron) and color which are used in each SK filter and may be any
    of the following:
    10  - Light Blue
    20  – Grey
    40  - Purple
    55  – Green
    70  – Brown
    100 – Black
    130 – Red
    200 – Yellow
    400 – Blue
[2] The spring type may be any of the following alphabetic codes:
    HALAR    – HALAR Coating
    HSL      - Hastelloy
    LC       - Low Cost Energy
    LC-HALAR – Low-Cost Energy – HALAR Coating
    LCHSL    - Hastelloy-Low Cost Energy
    Regular (not indicated on product name)
[3] Inlet / outlet type may be any of the following:
    ARF - Flange
    Int - Integral
    Thr - Threaded
    Vic - Victaulic
[4] Certified for a minimum flow of 72,000 L/day.
[6] Certified for a minimum flow of 1,150,200 L/day.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[5] Certified for a maximum of 4 ports.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] Product is certified for a minimum daily flow of 2,400,000 liters.
[2] These products have filtration levels of 10-800 microns.
[3] Certified for a minimum daily flow of 300,000 liters.
[4] Certified products are evaluated as POE systems.
[5] These products have filtration levels of 10-500 microns.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.
[11] Models EBS 10000 DW and EBS 15000 DW are certified for configurations O/L and I/L.

[1] Certified for SS316/CF8M and PTFE materials only.
[2] Certified for SS316/CF8M body, SS316 seat ring, and FKM and PTFE/RTFE seals only.

[1] Certified Pressurized Water Storage Tanks may be sold with a union which is designated
    by the inclusion of a "U" in the model number.
[2] Optional suffixes UG or TK
[3] Optional suffixes OC, HG, TK, H or HTC
[4] Optional suffixes PS, UG, TK, or OC
[5] Optional suffix WT
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] Fitting packaging is coded by the following convention:
    X indicates packaging:
    0 - Bulk pack
    1 - Blister pack
    3 - Single bag
    5 - Flag tagged
[2] Fitting sizes are coded by the following convention:
    XX, YY, and ZZ indicate size:
    02 - 1/8"
    03 - 3/16"
    04 - 1/4"
    05 - 5/16"
    06 - 3/8"
    08 - 1/2"
    10 - 5/8"
    12 - 3/4"
    14 - 7/8"
    16 - 1"
    24 - 1.5"
    32 - 2"
    40 - 2.5"
    48 - 3"
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] Certified for use in valves 1" - 120".
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.
[LL] Product conforms with lead content requirements for “lead free” plumbing as defined by
     California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water
     Act.

[1] Certification includes the anode only and does not include the cable or the sealant.
[2] Certified for a maximum ratio of 240 lbs. of anode to 1,000,000 gallons.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] 2503 RST-UVW-XYZ:
    2503: Standard high flow & pressure model
    R: Pressure control
        A - Adjustable by-pass (APS)
    S: Ports
        C - 3/8” Quick connect
        D - 5/16” Quick connect
        N - 10mm Quick connect
    T: CAM
        0 - 9 & A – Z
    U: Casing
        0 - 9 & A – Z
    V: Rotor
        0 - 9 & A – Z
    W: Motor (speed)
        0 - 9 & A – Z
    X: Power (voltage)
        0 - 9 & A – Z
    Y: Wire Units
        0 - 9 & A – Z
    Z: Mounting bracket
        0 - 9 & A – Z
[2] 44RST-UVW-XYZ:
    44: Slim Model
    R: Pressure Control
        A - Adjustable By-Pass (ABP)
        B - Internal By-Pass (IBP)
        C - Adjustable Pressure Switch (APS)
        J - Non-Adjustable By-Pass (N - ABP)
    S: Ports
        B - 1/4" Quick Connect
        J - 6 mm
        T - CAM (includes 0-9 and A-Z)
        U - Casing (includes 0-9 and A-Z)
        V - Rotor (includes 0-9 and A-Z)
        W - Motor (speed) (includes 0-9 and A-Z)
        X - Power (voltage) (includes 0-9 and A-Z)
        Y - Wire Units (includes 0-9 and A-Z)
        Z - Mounting bracket (includes 0-9 and A-Z)
[3] 6093 RST-UVW-XYZ:
    6903: Standard high flow & pressure model
    R: Pressure control
        A - Adjustable by-pass (APS)
    S: Ports
        A - 3/8” FPT
        B - 1/4” Quick connect
        C - 3/8” Quick connect
        D - 5/16” Quick connect
        N - 10mm Quick connect
    T: CAM
        0 - 9 & A – Z
    U: Casing
        0 - 9 & A – Z
    V: Rotor
        0 - 9 & A – Z
    W: Motor (speed)
        0 - 9 & A – Z
    X: Power (voltage)
        0 - 9 & A – Z
    Y: Wire Units
        0 - 9 & A – Z
    Z: Mounting bracket
        0 - 9 & A – Z
[4] 69RST-UVW-XYZ:
    69: Standard model
    R: Pressure Control
        A - Adjustable By-Pass (ABP)
        B - Internal By-Pass (IBP)
        C - Adjustable Pressure Switch (APS)
        H - ABP W/New-Plate
        I - Non-Adjustable By-Pass W/New Plate (N - ABP)
    S: Ports
        A  - 3/8" FPT
        B - 1/4" Quick Connect
        C - 3/8" Quick Connect
        T - CAM (includes 0-9 and A-Z)
        U - Casing (includes 0-9 and A-Z)
        V - Rotor (includes 0-9 and A-Z)
        W - Motor (speed) (includes 0-9 and A-Z)
        X - Power (voltage) (includes 0-9 and A-Z)
        Y - Wire Units (includes 0-9 and A-Z)
        Z - Mounting bracket (includes 0-9 and A-Z)
[5] 87RST-UVW-XYZ:
    87: Standard High Flow Model
    R: Pressure Control
        C - Adjustable Pressure Switch (APS)
    S: Ports
        F - Open Port
        T - CAM (includes 0-9 and A-Z)
        U - Casing (includes 0-9 and A-Z)
        V - Rotor (includes 0-9 and A-Z)
        W - Motor (speed) (includes 0-9 and A-Z)
        X - Power (voltage) (includes 0-9 and A-Z)
        Y - Wire Units (includes 0-9 and A-Z)
        Z - Mounting bracket (includes 0-9 and A-Z)
[6] X RST-UVW-XYZ:
    X: Standard high flow & pressure model
    R: Pressure control
       A - Adjustable by-pass (ABP)
       J - Non-adjustable by-pass (N-ABP)
    S: Ports
       B - 1/4” Quick connect
       J - 6mm Quick connect
       L - 5mm Quick connect
       K - 3/16” Quick connect
       M - 4mm Quick connect
       T - CAM (includes 0-9 and A-Z)
       U - Casing (includes 0-9 and A-Z)
       V - Rotor (includes 0-9 and A-Z) )
       W- Motor (speed) (includes 0-9 and A-Z)
       X - Power (voltage) (includes 0-9 and A-Z)
       Y - Wire Units (includes 0-9 and A-Z)
       Z - Mounting bracket (includes 0-9 and A-Z)

[1] Certified for a minimum daily flow of 21,804 L.
[2] (X) (Size) - 25, 5, 15, 20, 35, 40, 60, 80, 100, 120, 160, 200, 240, 280, 360, 400, or
    720
    (Y) - S (Basic) 
          SM (Monitor) 
          W (Manual wiper) 
          WM (Manual wiper, Monitor) 
          WMM (Manual wiper, Monitor, Alarm) 
          WA (Automatic wiper) 
          WAM (Automatic wiper, Monitor) 
          WAMM (Automatic wiper, Monitor, Alarm)
[3] (X) (Size) - 10, 15, 20, 35, 40, 60, 80, 100, 120, 160, 200, 240, 280, 360, 400, or 720 
    (Y) - S (Basic) 
          SM (Monitor) 
          W (Manual wiper) 
          WM (Manual wiper, Monitor) 
          WMM (Manual wiper, Monitor, Alarm) 
          WA (Automatic wiper) 
          WAM (Automatic wiper, Monitor) 
          WAMM (Automatic wiper, Monitor, Alarm)
[4] (X) (Size) - 10, 15, 20, 35, 40, 60, 80, 100, 120, 160, 200, 240, 280, 360, 400, or 720 
    (Y) - S (Basic) 
          SM (Monitor) 
          W (Manual wiper) 
          WM (Manual wiper, Monitor) 
          WMM (Manual wiper, Monitor, Alarm) 
          WA (Automatic wiper) 
          WAM (Automatic wiper, Monitor) 
          WAMM (Automatic wiper, Monitor, Alarm)
[5] (X) (Size) - 7, 15, 30, or 50 
    (Y) - S (Basic) 
          SM (Monitor) 
          WM (Manual wiper, Monitor) 
          WMM (Manual wiper, Monitor, Alarm) 
          Alarm (Alarm only)
[6] (X) (Size) - 7 or 10 
    (Y) - S (Basic)
[7] (X) (Size) - 10, 15, 20, 35, 80, 100, 120, 40L, 60L, 80L, 100L, or 120L 
    (Y) - S (Basic) 
          SM (Monitor) 
          W (Manual wiper) 
          WM (Manual wiper, Monitor) 
          WMM (Manual wiper, Monitor, Alarm) 
          WA (Automatic wiper) 
          WAM (Automatic wiper, Monitor) 
          WAMM (Automatic wiper, Monitor, Alarm)
[8] (X) (Size) - 1564, 2035, 2064, 2516, 2535, or 2564 
    (Y) - S (Basic)

[1] BSG 20 and BSG 20T are certified for a minimum flow of 72,000 gal./day.
[2] BSG 25 and BSG 25T are certified for a minimum flow of 122,400 gal./day.
[3] BSG 30 and BSG 30T are certified for a minimum flow of 182,880 gal./day.
[4] BSG 40 and BSG 40T are certified for a minimum flow of 338,400 gal.day.
[5] BSG 50 and BSG 50T are certified for a minimum flow of 537,120 gal./day.
[6] BSG 60 and BSG 60T are certified for a minimum flow of 802,080 gal.day.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] XXX is used as a reference to the treatment capacity in liters per second.
[2] Certified for a minimum daily permeate generation of 10,500 L.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] Size is expressed as Diameter x length.
[2] PURAN PN-FR-4040 model is certified for a minimum daily flow of 2,000 gallons.
    PURAN ROCOD-325 model is certified for a minimum daily flow of 8,500 gallons.
    PURAN PN-HLEFR-8040 model is certified for a minimum daily flow of 10,500 gallons. 
    PURAN PN-BW-4021 model is certified for a minimum daily flow of 950 gallons.
    PURAN PN-BW-2540 model is certified for a minimum daily flow of 750 gallons.
    PURAN PN-BW-2521 model is certified for a minimum daily flow of 400 gallons.
    PURAN PN-SWHF-8040 model is certified for a minimum daily flow of 9000 gallons.
    PURAN PN-XLE-4040 models is certified for a minimum daily flow of 2,600 gallons.
    PURAN PN-BW-4040 models is certified for a minimum daily flow of 2,400 gallons.
    PURAN PN-LE-4040 model is certified for a minimum daily flow of 2,700 gallons.
    PURAN PN-LE-8040 model is certified for a minimum daily flow of 12,500 gallons.
    PURAN PN-XLE-8040 model is certified for a minimum daily flow of 11,000 gallons.
    PURAN PN-BW-8040 model is certified for a minimum daily flow of 10,000 gallons.
    PURAN PN-SW-4040 model is certified for a minimum daily flow of 1,500 gallons.
    PURAN PN-SW-8040 model is certified for a minimum daily flow of 6,500 gallons.
    PURAN PN-FR-8040 model is certified for a minimum daily flow of 11,500 gallons. 
    PURAN PN-FR-PRO-8040 model is Certified for a minimum daily flow of 10,500 gallons. 
[3] All models 2.5” in diameter require a 2 gpm flush for 24 hours using tap water.
    All models 4” in diameter require a 4 gpm flush for 24 hours using tap water.
    All models 8” in diameter require a 15 gpm flush for 24 hours using tap water.

[1] The 4040 models are flushed for 24 hours at a rate of 17 liters per minute with DI
    water.
    The 4040 models are Certified for a minimum daily flow of 2,271 liters per day.
[2] The 8040 models are flushed for 24 hours at a rate of 200 liters per minute with DI
    water.
    The 8040 models are Certified for a minimum daily flow of 12,617 liters per day.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] Certified for the following minimum daily flow rates:
    Aquaporin Inside® CLEAR Ultra 4040 is certified for a minimum flow of 2,600 gallons per
    day.
    Aquaporin Inside® CLEAR Ultra 4040XL is certified for a minimum flow of 3,100 gallons
    per day.
    Aquaporin Inside® CLEAR Plus 4040 is certified for a minimum flow of 2,100 gallons per
    day.
    Aquaporin Inside® CLEAR Plus 4040XL is certified for a minimum flow of 2,500 gallons per
    day.
    Aquaporin Inside® CLEAR Plus FR 4040 is certified for a minimum flow of 1,800 gallons
    per day.
    Aquaporin Inside® CLEAR Plus FR 4040XL is certified for a minimum flow of 2,100 gallons
    per day.
    Aquaporin Inside® CLEAR Classic 4040 is certified for a minimum flow of 2,500 gallons
    per day.
    Aquaporin Inside® CLEAR Classic 4040XL is certified for a minimum flow of 2,900 gallons
    per day.
    Aquaporin Inside® CLEAR Eco 4040 is certified for a minimum flow of 2,800 gallons per
    day.
    Aquaporin Inside® CLEAR Eco 4040XL is certified for a minimum flow of 3,300 gallons per
    day.
[2] Filter elements require the following pre-service flush:
    Aquaporin Inside® CLEAR Ultra 4040 requires a 24 hour pre-service flush at a flow rate
    of 1.80 gallons per minute (gpm) with de-ionized water.
    Aquaporin Inside® CLEAR Ultra 4040XL requires a 24 hour pre-service flush at a flow rate
    of 2.15 gallons per minute (gpm) with de-ionized water.
    Aquaporin Inside® CLEAR Plus 4040 requires a 24 hour pre-service flush at a flow rate of
    1.46 gallons per minute (gpm) with de-ionized water.
    Aquaporin Inside® CLEAR Plus 4040XL requires a 24 hour pre-service flush at a flow rate
    of 1.74 gallons per minute (gpm) with de-ionized water.
    Aquaporin Inside® CLEAR Plus FR 4040 requires a 24 hour pre-service flush at a flow rate
    of 1.25 gallons per minute (gpm) with de-ionized water.
    Aquaporin Inside® CLEAR Plus FR 4040XL requires a 24 hour pre-service flush at a flow
    rate of 1.46 gallons per minute (gpm) with de-ionized water.
    Aquaporin Inside® CLEAR Classic 4040 requires a 24 hour pre-service flush at a flow rate
    of 1.74 gallons per minute (gpm) with de-ionized water.
    Aquaporin Inside® CLEAR Classic 4040XL requires a 24 hour pre-service flush at a flow
    rate of 2.01 gallons per minute (gpm) with de-ionized water.
    Aquaporin Inside® CLEAR Eco 4040 requires a 24 hour pre-service flush at a flow rate of
    2.29 gallons per minute (gpm) with de-ionized water.
    Aquaporin Inside® CLEAR Eco 4040XL requires a 24 hour pre-service flush at a flow rate
    of 1.80 gallons per minute (gpm) with de-ionized water.

[1] Certified for the following minimum daily flow rates:
    Aquaporin Inside® CLEAR Eco 8040-440 is certified for a minimum flow of 15,000 gallons
    per day.
    Aquaporin Inside® CLEAR Eco 8040-400 is certified for a minimum flow of 13,500 gallons
    per day.
    Aquaporin Inside® CLEAR Ultra 8040-440 is certified for a minimum flow of 13,500 gallons
    per day.
    Aquaporin Inside® CLEAR Ultra 8040-400 is certified for a minimum flow of 12,500 gallons
    per day.
    Aquaporin Inside® CLEAR Plus 8040-440 is certified for a minimum flow of 11,500 gallons
    per day.
    Aquaporin Inside® CLEAR Plus 8040-400 is certified for a minimum flow of 10,500 gallons
    per day.
    Aquaporin Inside® CLEAR Plus FR 8040-440 is certified for a minimum flow of 10,000
    gallons per day.
    Aquaporin Inside® CLEAR Plus FR 8040-400 is certified for a minimum flow of 9,000
    gallons per day.
    Aquaporin Inside® CLEAR Classic 8040-440 is certified for a minimum flow of 13,000
    gallons per day.
    Aquaporin Inside® CLEAR Classic 8040-400 is certified for a minimum flow of 12,000
    gallons per day.
[2] Filter elements require the following pre-service flush:
    Aquaporin Inside® CLEAR Eco 8040-440 requires a 24 hour pre-service flush at a flow rate
    of 10.42 gallons per minute (gpm) with de-ionized water.
    Aquaporin Inside® CLEAR Eco 8040-400 requires a 24 hour pre-service flush at a flow rate
    of 9.38 gallons per minute (gpm) with de-ionized water.
    Aquaporin Inside® CLEAR Ultra 8040-440 requires a 24 hour pre-service flush at a flow
    rate of 9.38 gallons per minute (gpm) with de-ionized water.
    Aquaporin Inside® CLEAR Ultra 8040-400 requires a 24 hour pre-service flush at a flow
    rate of 8.68 gallons per minute (gpm) with de-ionized water.
    Aquaporin Inside® CLEAR Plus 8040-440 requires a 24 hour pre-service flush at a flow
    rate of 7.99 gallons per minute (gpm) with de-ionized water.
    Aquaporin Inside® CLEAR Plus 8040-400 requires a 24 hour pre-service flush at a flow
    rate of 7.29 gallons per minute (gpm) with de-ionized water.
    Aquaporin Inside® CLEAR Plus FR 8040-440 requires a 24 hour pre-service flush at a flow
    rate of 6.94 gallons per minute (gpm) with de-ionized
    water.
    Aquaporin Inside® CLEAR Plus FR 8040-400 requires a 24 hour pre-service flush at a flow
    rate of 6.25 gallons per minute (gpm) with de-ionized water.
    Aquaporin Inside® CLEAR Classic 8040-440 requires a 24 hour pre-service flush at a flow
    rate of 9.03 gallons per minute (gpm) with de-ionized
    water.
    Aquaporin Inside® CLEAR Classic 8040-400 requires a 24 hour pre-service flush at a flow
    rate of 8.33 gallons per minute (gpm) with de-ionized
    water.

[1] Products require the following pre-service flush using tap water at a pressure not to
    exceed 50 psi:						
    Aquaporin Inside® CLEAR Ultra 4040,  Aquaporin Inside® CLEAR Ultra 4040XL require a
    pre-service flush at a flow rate of 4 GPM (gallons per minute) for 24 hours.
    Aquaporin Inside® CLEAR Ultra 8040-400,  Aquaporin Inside® CLEAR Ultra 8040-440 require
    a pre-service flush at a flow rate of 12 GPM (gallons per minute) for 24 hours.
    Aquaporin Inside® CLEAR Plus 4040,  Aquaporin Inside® CLEAR Plus 4040XL require a
    pre-service flush at a flow rate of 4 GPM (gallons per minute) for 24 hours.
    Aquaporin Inside® CLEAR Plus 8040-400,  Aquaporin Inside® CLEAR Plus 8040-440 require a
    pre-service flush at a flow rate of 12 GPM (gallons per minute) for 24 hours.
    Aquaporin Inside® CLEAR Plus FR 4040,  Aquaporin Inside® CLEAR Plus FR 4040XL require a
    pre-service flush at a flow rate of 4 GPM (gallons per minute) for 24 hours.
    Aquaporin Inside® CLEAR Plus FR 8040-400,  Aquaporin Inside® CLEAR Plus FR 8040-440
    require a pre-service flush at a flow rate of 12 GPM (gallons per minute) for 24 hours.
    Aquaporin Inside® CLEAR Classic 4040, Aquaporin Inside® CLEAR Classic 4040XL require a
    pre-service flush at a flow rate of 4 GPM (gallons per minute) for 24 hours.
    Aquaporin Inside® CLEAR Classic 8040-400,  Aquaporin Inside® CLEAR Classic 8040-440
    require a pre-service flush at a flow rate of 12 GPM (gallons per minute) for 24 hours.
    Aquaporin Inside® CLEAR Classic HR 4040,  Aquaporin Inside® CLEAR Classic HR 4040XL
    require a pre-service flush at a flow rate of 4 GPM (gallons per minute) for 24 hours.
    Aquaporin Inside® CLEAR Classic HR 8040-400, Aquaporin Inside® CLEAR Classic HR 8040-440
    require a pre-service flush at a flow rate of 12 GPM (gallons per minute) for 24 hours.
    Aquaporin Inside® CLEAR Classic FR 4040,  Aquaporin Inside® CLEAR Classic FR 4040XL
    require a pre-service flush at a flow rate of 4 GPM (gallons per minute) for 24 hours.
    Aquaporin Inside® CLEAR Classic FR 8040-400,  Aquaporin Inside® CLEAR Classic FR
    8040-440 require a pre-service flush at a flow rate of 12 GPM (gallons per minute) for
    24 hours.
    Aquaporin Inside® CLEAR Eco 4040, Aquaporin Inside® CLEAR Eco 4040XL require a
    pre-service flush at a flow rate of 4 GPM (gallons per minute) for 24 hours.
    Aquaporin Inside® CLEAR Eco 8040-400,  Aquaporin Inside® CLEAR Eco 8040-440 require a
    pre-service flush at a flow rate of 12 GPM (gallons per minute) for 24 hours.

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] DAV  - Dorot Control Valve
    P    - Plastic Body & Cover
    X    - Size
           05 - 1/2" / 12 mm
           75 - 3/4" / 20 mm
           1  - 1" / 25mm
           2  - 2" / 50 mm
    Y    - Function
           A  - Automatic
           K  - Kinetic
           KA - Kinetic Automatic Combination
    Z    - Connection Standard
           BSP - British Standard Pipe
           NPT - National Pipe Thread
    PN16 - Pressure Rating (230 psi)
    Note: 2" / 50 mm available with K or KA functions only
[2] Products may have a K or KA suffix.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] This product is Certified for use with 1.5" Octave threaded polymer water meters only.
[2] Certified for use with 1" water meters.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[3] The Certified Octave Stainless Steel Ultrasonic Water Meters include the following sizes
    and end connections:
    1.5" x 13" S.St MM Fixed Oval Flanges
    1.5" x 10" S.St MM Fixed Oval Flanges
    1.5" x 12.625" S.St MM NPT
    2" x 10" S.St MM Fixed Oval Flanges
    2" x 15.25" S.St MM Fixed Oval Flanges
    2" x 17" S.St MM Fixed Oval Flanges
    2" x 15.25" S.St MM Fixed Oval NPT
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] Coupling Set requested for use with 1/2-3/4" Water meters only.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] Certified for use in well casings with a diameter of 6" and greater and at least 40 feet
    in depth.
[2] Certified for cables with a maximum length of 13 feet.
[3] Certified for a minimum flow of 3,000 gallons per day.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] Certified for the following minimum daily flow rates:
    SURO XLP-8040 is certified for a minimum flow of 9000 gallons per day.
    SURO XLP-4040 and SURO BW-4040FR are certified for a minimum flow of 2300 gallons per
    day.
    SURO ULP-8040 is certified for a minimum flow of 12000 gallons per day.
    SURO ULP-4040 is certified for a minimum flow of 2600 gallons per day.
    SURO ULP-8040HR and SURO BW-8040 are certified for a minimum flow of 10500 gallons per
    day.
    SURO ULP-4040HR is certified for a minimum flow of 2400 gallons per day.
    SURO BW-4040 is certified for a minimum flow of 2500 gallons per day.
    SURO BW-8040FR is certified for a minimum flow of 9500 gallons per day.
    SURO NF30-8040 is certified for a minimum flow of 14000 gallons per day.
    SURO NF30-4040 is certified for a minimum flow of 3200 gallons per day.
    SURO NF90-8040 is certified for a minimum flow of 14500 gallons per day.
    SURO NF90-4040 is certified for a minimum flow of 3500 gallons per day.
    SURO SW-8040 is certified for a minimum flow of 9500 gallons per day.
    SURO SW-4040 is certified for a minimum flow of 3200 gallons per day.
    SURO SW-8040FR is certified for a minimum flow of 7500 gallons per day.
    SURO SW-4040FR is certified for a minimum flow of 3200 gallons per day.
[3] Naming Convention:
    SURO      - The abbreviation of the company name
    ULP       - Ultra Low Pressure
    XLP       - Extremely Low Pressure
    FR        - Fouling Resistance and can be used to High Salt water
    BW        - Bitter water, which can be used for bitter water
    8040/4040 - Size