NSF Product and Service Listings

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.
[Q] This product meets the reduced Q test statistic criteria of 0.5 µg for lead per Section
    9.5.1.1 of NSF/ANSI/CAN 61.

[2] This product does not require a Q statistic. It is made from material or materials that
    do not require lead analysis when reviewed per NSF/ANSI/CAN Standard 61, Section 3.3.

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.
[Q] This product meets the reduced Q test statistic criteria of 0.5 µg for lead per Section
    9.5.1.1 of NSF/ANSI/CAN 61.

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.
[Q] This product meets the reduced Q test statistic criteria of 0.5 µg for lead per Section
    9.5.1.1 of NSF/ANSI/CAN 61.

[1] (1) Hose length
    (2) Packaging options (M, F, E, EL, CF, CM, PF, FM, XM, XF, XE, XL, XC, or R)
[Q] This product meets the reduced Q test statistic criteria of 1 µg or 0.5 µg for lead per
    Section 9.5.1.1 of NSF/ANSI/CAN 61.

[1] (1) Hose length
    (2) Packaging options (M, F, E, EL, CF, CM, PF, FM, XM, XF, XE, XL, XC, or R)
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] (1) Hose length
    (2) Packaging options (M, F, E, EL, CF, CM, PF, FM, XM, XF, XE, XL, XC, or R)
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] (1) Hose length
    (2) Packaging options (M, F, E, EL, CF, CM, PF, FM, XM, XF, XE, XL, XC, or R)
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] YY: 		
    BB - OUTLET PIPE is brass, OUTLET is brass		
    SS - OUTLET PIPE is stainless steel, OUTLET is stainless steel 		
    BS - OUTLET PIPE is brass, OUTLET is stainless steel 		
    SB - OUTLET PIPE is stainless steel, OUTLET is brass
    BP - OUTLET PIPE is brass, OUTLET is PP		
    SP - OUTLET PIPE is stainless steel, OUTLET is PP		
    
[2] (1)-(2)
    (1) Outlet pipe - L type: L 
        C type: C, 2C, 12C
    (2) Outlet pipe length: 250 - 500mm
        Blank - Standard: C-300, 2C-280, 12C-390
    
[3] (3)-(4)		
    (3) Shank type:		
        1/4OD		
        2Q  - 1/4" push in connector		
        3Q  - 3/8" push in connector		
        WJZ - With tubing, J - PE length:  20~200cm, Z - PE tube color ( various colors)		
    		
    (4) Shank length: 2" - 4"		
        Blank - Standard - 1/4OD-3		
    
[4] A     - Air gap
    Blank - Standard: without air gap
    
[5] XX - Various color
    

[Q] This product meets the reduced Q test statistic criteria of 1 µg or 0.5 µg for lead per
    Section 9.5.1.1 of NSF/ANSI/CAN 61.

[1] This tubing is Certified for the following diameters and lengths: 0.161 to 0.250"
    diameter, maximum length 175".
[2] This tubing is Certified for the following diameters and lengths: 0.251 to 0.500"
    diameter, maximum length 87".
[3] This tubing is Certified for the following diameters and lengths: 0.501 to 0.750"
    diameter, maximum length 58".
[4] This tubing is Certified for the following diameters and lengths: 0.751 to 1.000"
    diameter, maximum length 43".
[5] This tubing is Certified for the following diameters and lengths: 1.001 to 1.250"
    diameter, maximum length 35".

[1] This tubing is Certified for the following diameters and lengths: 0.161 to 0.250"
    diameter, maximum length 175".
[2] This tubing is Certified for the following diameters and lengths: 0.251 to 0.500"
    diameter, maximum length 87".
[3] This tubing is Certified for the following diameters and lengths: 0.501 to 0.750"
    diameter, maximum length 58".
[4] This tubing is Certified for the following diameters and lengths: 0.751 to 1.000"
    diameter, maximum length 43".
[5] This tubing is Certified for the following diameters and lengths: 1.001 to 1.250"
    diameter, maximum length 35".

[1] AA   - Body size (16, 18 ,22 ,24 ,28 ,2C, 2H, 4C, 4F, 4H, 4I, 4M, 4S, 4V, 6B, 6F, 6I, 
           8B, 8I, JI, JL, SI, SL, CI, CL, KI, LI, MI, NI, PI or QI)
    BBB  - Type of cartridge (168, 365, 605, ANA, ANB, ANZ, BFZ, FL1, FL2, FL3, FL4, FL5, 
           FL6, FL7, FL8, FL9, FLA, FLB, FLC, FLD, FLS, FLZ, FRO, FR2, FRE, HFA, HFB, HFC, 
           HFD, HFE, HFS, HPZ, HPA, HPB, HPC, HPL, HP1, HP2, HP3, HP4, HP5, HP6, HP7, HP8, 
           HP9, H12, M15, NR0, O15, ON1, ON2, ON3, ON4, ON5, ON6, ON7, ON8, ON9, O12, ONA, 
           ONB, ONC, OND, ONE, ONF, ONL, ONS, ONZ, OW2, OWA, OWB, OWC, OWD, OWL, OWS, 
           SRB, SRC, SRO, or SIN)
    CC   - Type of gasket (00, 05, 06, 10, 11, 15, 16, 20, 21, 25, 30, 35, 40, 55, 60,
           61, 65, 66, 70, 71, 75, 76, 80 , 81 or 85)
    DDD  - Color (any three alpha numeric characters)
    EEEE - Personalization (any four alpha numeric characters)
    VMS International (VPAK) H20Miser Model 16001 is a kit with three replacement aerators.

[Q] This product meets the reduced Q test statistic criteria of 1 µg or 0.5 µg for lead per
    Section 9.5.1.1 of NSF/ANSI/CAN 61.

[2] MICRO Designations: 
    AAAA - Color (any alpha numeric characters) 
    BB   - Micro Style wand (GD, GJ, GS, MD, MJ, MS, MA, MP, MF, MR, PD, PJ, PS, and DO) 
    CC   - Shell design (any alpha numeric characters) 
    DD   - Waterway (BA, BB, BC, BD, BE, BF, B1, B2, B3, B4, B5, B6, B7, B8, B9, BX, C1, 
           C2, C3, C4, C5, C6, C7, C8, C9, D1, D2, D3, D4, G1, G2, G3, G4, G5, G6, L1, 
           L2, L3, L4, L5, L6, and T5) or Waterway Extension (M3, M4, M5, M6, M7, P1, 
           P2 - only used with L1 - L6 waterways). 
    E    - Distributor (1, 2, 3, 4, 5, and 6) 
    F    - Spring (0, 1, 2, 3, 4, 5, 6, 7, 8, or 9) 
    GG   - Aerator (F1, F2, F3, F4, F5, F6, F7, F8, F9, J1, J2, J3, J4, J5, J6, J7, J8, 
           J9, K1, N1, N5, N6, N7, N8, N9, S1, S2, S3, V1, V5, V6, V7, V8, V9, A1, A2, 
           A3, A4, or A5) 
    HH   - Flow controller (00, 01, 02, 03, 04, 05, 10, 14, 15, 16, 17, 18, 19, or 20) 
    I    - Trigger (any single alpha or numeric characters) 
    J    - Faceplates (0, 1, 2, 3, 4, 5, 6, 7, 8, 9 A, B, C, D, E, and F) 
    K    - Packaging (any single alpha or numeric characters) 
    L    - Customization (any single alpha or numeric characters)
[3] Only products bearing the NSF Mark on the product, product packaging, and/or
    documentation shipped with the product are Certified.
[4] MICRO EVO Designations: 
    AAAA - Color (any alpha numeric characters) 
    BB   - Micro Evo Style wand (ED, EJ or ES) 
    CC   - Shell design (any alpha numeric characters) 
    D    - Threaded Distributor (1, 2, 3, 4, 5, or 6) 
    EE   - Waterway Extension (R1, R2, R3, R4, A1, A2, A3, A4, B1, B2, B3, or B4) 
    F    - Waterway (0, 1, 2, 3, or 4) 
    G    - Spring (0, 1, 2, 3, or 4) 
    HH   - Aerator (D1, D5, D6, D7, D8, D9, S2, J1, J2, J3, J4, J5, J6, J7, J8, or J9) 
    I    - Flow controller (0, 1, 2, 3, 4, 5) 
    J    - Trigger (any single alpha or numeric characters) 
    K    - Faceplate (0, 1, 2, 3, or 4)
    L    - Packaging (any single alpha or numeric characters) 
    M    - Customization (any single alpha or numeric characters)
[5] Professional Slim 115 DJ 10x1 MGTC LONG - B020P5CCP916N900P120
    
    Professional Slim 115 Spray 10x1 MGTC LONG - B020P6CCP916S100P120
    
    Explanation of naming: 
    AAAABBCCDDEFGGHHIJKL
    
    AAAA: Color (any alpha numeric characters) 
    
    BB:
    P5 - “PROFESSIONAL SLIM 115 DUAL JET”
    P6 - “PROFESSIONAL SLIM 115 SPRAY”
    
    CC: Shell design (any alpha numeric characters) 
    
    DD: 
    P9 - Different design of waterway (Part 1) made in “BRASS OT57-USA”
    
    E: 
    1 - The distributor for Micro Dual-Jet, Micro Spray, Micro Mango Dual-Jet and Micro
    Mango Spray, Professional Dual-Jet and Professional Spray 
    F: 
    6 - Nine different designs of springs. 
    
    GG: 
    N9 - Different aerators for Micro Dual-Jet with faceplate 1 or 2 
    S1 - Different design of aerator cap (part 10.7) 
    
    HH: 
    00 - Without Flow Controller
    
    I: Trigger (any single alpha or numeric characters) 
    
    J: 
    1 - Different designs of Faceplates. 
    
    K: Packaging (any single alpha or numeric characters) 
    
    L: Customization (any single alpha or numeric characters)
[6] Professional Slim 115 DJ 10x1 MGTC SHORT - B020P5CCPA16N900P120
    
    Professional Slim 115 Spray 10x1 MGTC SHORT - B020P6CCPA16S100P120
    
    Explanation of naming: 
    AAAABBCCDDEFGGHHIJKL
    
    AAAA: Color (any alpha numeric characters) 
    
    BB:
    P5 - “PROFESSIONAL SLIM 115 DUAL JET”
    P6 - “PROFESSIONAL SLIM 115 SPRAY”
    
    CC: Shell design (any alpha numeric characters) 
    
    DD: 
    PA - Different design of waterway (Part 1) made in “BRASS OT57-USA”
    
    E: 
    1 - The distributor for Micro Dual-Jet, Micro Spray, Micro Mango Dual-Jet and Micro
    Mango Spray, Professional Dual-Jet and Professional Spray 
    F: 
    6 - Nine different designs of springs. 
    
    GG: 
    N9 - Different aerators for Micro Dual-Jet with faceplate 1 or 2 
    S1 - Different design of aerator cap (part 10.7) 
    
    HH: 
    00 - Without Flow Controller
    
    I: Trigger (any single alpha or numeric characters) 
    
    J: 
    1 - Different designs of Faceplates. 
    
    K: Packaging (any single alpha or numeric characters) 
    
    L: Customization (any single alpha or numeric characters)
[7] Professional Slim 115 DJ 3/8'' - B020P5CCP716N900P120
    
    Professional Slim 115 Spray 3/8'' - B020P6CCP716S100P120
    
    Explanation of naming: 
    AAAABBCCDDEFGGHHIJKL
    
    AAAA: Color (any alpha numeric characters) 
    
    BB:
    P5 - “PROFESSIONAL SLIM 115 DUAL JET”
    P6 - “PROFESSIONAL SLIM 115 SPRAY”
    
    CC: Shell design (any alpha numeric characters) 
    
    DD: 
    P7 - Different design of waterway (Part 1) made in “BRASS OT57-USA”
    
    E: 
    1 - The distributor for Micro Dual-Jet, Micro Spray, Micro Mango Dual-Jet and Micro
    Mango Spray, Professional Dual-Jet and Professional Spray 
    F: 
    6 - Nine different designs of springs. 
    
    GG: 
    N9 - Different aerators for Micro Dual-Jet with faceplate 1 or 2 
    S1 - Different design of aerator cap (part 10.7) 
    
    HH: 
    00 - Without Flow Controller
    
    I: Trigger (any single alpha or numeric characters) 
    
    J: 
    1 - Different designs of Faceplates. 
    
    K: Packaging (any single alpha or numeric characters) 
    
    L: Customization (any single alpha or numeric characters)
[8] Professional Slim 115 DJ 1/2” - B020P5CCP816N900P120
    
    Professional Slim 115 Spray 1/2” - B020P6CCP816S100P120
    
    Explanation of naming: 
    AAAABBCCDDEFGGHHIJKL
    
    AAAA: Color (any alpha numeric characters) 
    
    BB:
    P5 - “PROFESSIONAL SLIM 115 DUAL JET”
    P6 - “PROFESSIONAL SLIM 115 SPRAY”
    
    CC: Shell design (any alpha numeric characters) 
    
    DD: 
    P8 - Different design of waterway (Part 1) made in “BRASS OT57-USA”
    
    E: 
    1 - The distributor for Micro Dual-Jet, Micro Spray, Micro Mango Dual-Jet and Micro
    Mango Spray, Professional Dual-Jet and Professional Spray 
    F: 
    6 - Nine different designs of springs. 
    
    GG: 
    N9 - Different aerators for Micro Dual-Jet with faceplate 1 or 2 
    S1 - Different design of aerator cap (part 10.7) 
    
    HH: 
    00 - Without Flow Controller
    
    I: Trigger (any single alpha or numeric characters) 
    
    J: 
    1 - Different designs of Faceplates. 
    
    K: Packaging (any single alpha or numeric characters) 
    
    L: Customization (any single alpha or numeric characters)
[9] Professional Slim 93 Spray 10x1 MGTC LONG - B020P2CCP556S100Q120
    
    Professional Slim 93 DJ 10x1 MGTC LONG - B020P1CCP556N900Q120
    
    Professional Slim Comfort 93 DJ 10x1 MGTC - B020P3CCP556N900I12W
    
    Professional Slim Comfort 93 Spray 10x1 MGTC - B020P4CCP556S100I12W
    
    Explanation of naming: 
    AAAABBCCDDEFGGHHIJKL
    
    AAAA: Color (any alpha numeric characters) 
    
    BB:
    P1 - CPROFESSIONAL SLIM 93 DUAL JET”
    P2 - “PROFESSIONAL SLIM 93 SPRAY”
    P3 - “PROFESSIONAL SLIM 93 COMFORT DUAL JET”
    P4 - “PROFESSIONAL SLIM 93 COMFORT SPRAY”
    
    
    CC: Shell design (any alpha numeric characters) 
    
    DD: 
    P5 - Different design of waterway (Part 1) made in “BRASS OT57-USA”
    
    E: 
    5 - Different design of distributor external dimensions (Part # 9.4) for Media, Media
    Plus, Media Brass, Media Brass Plus. 
    
    F: 
    6 - Nine different designs of springs. 
    
    GG: 
    N9 - Different aerators for Micro Dual-Jet with faceplate 1 or 2 
    S1 - Different design of aerator cap (part 10.7) 
    
    HH: 
    00 - Without Flow Controller
    
    I: Trigger (any single alpha or numeric characters) 
    
    J: 
    1 - Different designs of Faceplates. 
    
    K: Packaging (any single alpha or numeric characters) 
    
    L: Customization (any single alpha or numeric characters)
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.
[10] Professional Slim 93 Spray 3/8” - B020P2CCP356S100Q120
     
     Professional Slim 93 DJ 3/8” - B020P1CCP356N900Q120
     
     Explanation of naming: 
     AAAABBCCDDEFGGHHIJKL
     
     AAAA: Color (any alpha numeric characters) 
     
     BB:
     P1 - “PROFESSIONAL SLIM 93 DUAL JET”
     P2 - “PROFESSIONAL SLIM 93 SPRAY”
     
     CC: Shell design (any alpha numeric characters) 
     
     DD: 
     P3 - different design of waterway (Part 1) made in “BRASS OT57-USA”
     
     E: 
     5 - Different design of distributor external dimensions (Part # 9.4) for Media, Media
     Plus, Media Brass, Media Brass Plus. 
     
     F: 
     6 - Nine different designs of springs. 
     
     GG: 
     N9 - Different aerators for Micro Dual-Jet with faceplate 1 or 2 
     S1 - Different design of aerator cap (part 10.7) 
     
     HH: 
     00 - Without Flow Controller
     
     I: Trigger (any single alpha or numeric characters) 
     
     J: 
     1 - Different designs of Faceplates. 
     
     K: Packaging (any single alpha or numeric characters) 
     
     L: Customization (any single alpha or numeric characters)
[11] Professional Slim 93 Spray 1/2” - B020P2CCP456S100Q120
     
     Professional Slim 93 DJ 1/2” - B020P1CCP456N900Q120
     
     Explanation of naming: 
     AAAABBCCDDEFGGHHIJKL
     
     AAAA: Color (any alpha numeric characters) 
     
     BB:
     P1 - “PROFESSIONAL SLIM 93 DUAL JET”
     P2 - “PROFESSIONAL SLIM 93 SPRAY”
     
     CC: Shell design (any alpha numeric characters) 
     
     DD: 
     P4 - Different design of waterway (Part 1) made in “BRASS OT57-USA”
     
     E: 
     5 - Different design of distributor external dimensions (Part # 9.4) for Media, Media
     Plus, Media Brass, Media Brass Plus. 
     
     F: 
     6 - Nine different designs of springs. 
     
     GG: 
     N9 - Different aerators for Micro Dual-Jet with faceplate 1 or 2 
     S1 - Different design of aerator cap (part 10.7) 
     
     HH: 
     00 - Without Flow Controller
     
     I: Trigger (any single alpha or numeric characters) 
     
     J: 
     1 - Different designs of Faceplates. 
     
     K: Packaging (any single alpha or numeric characters) 
     
     L: Customization (any single alpha or numeric characters)
[12] Professional Slim 93 Spray 10x1 MGTC SHORT - B020P2CCP656S100Q120
     
     Professional Slim 93 DJ 10x1 MGTC SHORT - B020P1CCP656N900Q120
     
     Explanation of naming: 
     AAAABBCCDDEFGGHHIJKL
     
     AAAA: Color (any alpha numeric characters) 
     
     BB:
     P1- “PROFESSIONAL SLIM 93 DUAL JET”
     P2- “PROFESSIONAL SLIM 93 SPRAY”
     
     CC: Shell design (any alpha numeric characters) 
     
     DD: 
     P6 - different design of waterway (Part 1) made in “BRASS OT57-USA”
     
     E: 
     5 - Different design of distributor external dimensions (Part # 9.4) for Media, Media
     Plus, Media Brass, Media Brass Plus. 
     
     F: 
     6 - Nine different designs of springs. 
     
     GG: 
     N9 - Different aerators for Micro Dual-Jet with faceplate 1 or 2 
     S1 - Different design of aerator cap (part 10.7) 
     
     HH: 
     00 - Without Flow Controller
     
     I: Trigger (any single alpha or numeric characters) 
     
     J: 
     1 - Different designs of Faceplates. 
     
     K: Packaging (any single alpha or numeric characters) 
     
     L: Customization (any single alpha or numeric characters)

[Q] This product meets the reduced Q test statistic criteria of 1 µg or 0.5 µg for lead per
    Section 9.5.1.1 of NSF/ANSI/CAN 61.

[Q] This product meets the reduced Q test statistic criteria of 1 µg or 0.5 µg for lead per
    Section 9.5.1.1 of NSF/ANSI/CAN 61.

[Q] This product meets the reduced Q test statistic criteria of 1 µg or 0.5 µg for lead per
    Section 9.5.1.1 of NSF/ANSI/CAN 61.
[13] R   - Regulator 
     (1) - Type of Regulator: A, B, C, D, or E 
     (3) - Flow Rate: 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, or 15
     (4) - Regulator Color: Black, blue, brown, green, grey, light grey, red, white, 
           yellow, orange, fuscia or pink

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.
[Q] This product meets the reduced Q test statistic criteria of 1 µg or 0.5 µg for lead per
    Section 9.5.1.1 of NSF/ANSI/CAN 61.
[14] Side Spray Diverter Valve Assembly
     ABCDEFGH
     A - Valve stem (1)
     B - Sealing washer (2)
     C - Valve shell (3)
     D - Shell O-ring (4)
     E - Conical washer (5)
     F - Side spray washer (6)
     G - Side spray housing (0,7,1)
     H - Side spray shell (0,8)

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.
[Q] This product meets the reduced Q test statistic criteria of 1 µg or 0.5 µg for lead per
    Section 9.5.1.1 of NSF/ANSI/CAN 61.

[15] AAAA - Color (any four digit number)
       BB - Concept style wand (CG, CT, CY, EP, GP, OP, QP, TP, TX, or YP)
       CC - Waterway (G1, G2, T1, or T2)
       DD - Diverter shell (01, 02, 03)
        E - Eccentric plug (1, 2, 3, or 4)
        F - Spring (0, 1, or 2)
        G - Aerator (0, 1, 2, 5, A, C, E, F, G, H, J, K, L, M, S, T, U, V, W, X, Y, Z, 
            &, or £)
        H - Flow controller (0, 1, 2, 3, 4, 5, 6, 9, A, or B)
        I - Trigger cover (any single alpha or numeric character)
        J - Trigger cover insert (any single alpha or numeric character)
       KK - Faceplate style (D1, D2, D3, D4, D5, or D6)
        L - Packaging (any single digit number)
        M - Screen washer type (0, 1, 2, or M)

[16] AAAA - Color (any four digit number)
        B - Macro Corta style wand (MC)
        C - Waterway (A, H, K, L, M, N, or P)
        D - Circular insert (4 or 5)
        E - Spring (0, 2, 3 or 4)
        F - Aerator (0, 1, 2, 5, A, E, F, G, H, I, J, K, L, M, P,Q, U, V, W, Y, Z, &, or £)
        G - Flow controller (0, 1, 2, 3, 4, 5, 6, 7, 8, 9, A, B, or C)
        H - Button/trigger cover (any single alpha or numeric character)
       II - Faceplate style (16, 51, A1, A2, A4, A6, A7, B1, B2,B3, B4, P1, P3, or P5)
        J - Packaging (any single digit number)
        K - Screen washer type (0, 1, or 2)
        L - Unassigned (any single digit number)
       MM - Trigger cover insert (any two alpha or numeric characters)
        N - Custom version (any single digit number)

[17] AAAA - Color (any four digit number)
       BB - Macro Ergo style wand (ME)
        C - Waterway (5, 6, 8, 9, C, D, E, G, H, K, L, M, N, P, R, T, U, or V)
        D - Circular insert (4 or 5)
        E - Spring (0, 2, 3 or 4)
        F - Aerator (0, 1, 2, 5, A , E, F, G, H, I, J, K, L, M, P, Q, U, V, W, Y, Z, &, 
            or £)
        G - Flow controller (0, 1, 2, 3, 4 , 5 , 6, 7, 8, 9, A,B, or C)
        H - Button/trigger cover (any single alpha or numeric character)
       II - Faceplate style (16, 51, A1, A2, A4, A6, A7, B1, B2,B3, B4, P1, P2, P3, or P5)
        J - Package (any single digit number)
        K - Screen washer type (0, 1, or 2)
        L - Grip (any single digit number)
       MM - Trigger cover insert (any two alpha or numeric characters)
        N - Custom version (any single digit number)

[18] AAAA - Color (any four digit number)
       BB - Macro Long style wand (ML)
        C - Waterway (5, 6, 8, 9, C, D, E, G, H, K, L, M, N, P, R, T, U,or V)
        D - Circular insert (4 or 5)
        E - Spring (0, 2, 3 or 4)
        F - Aerator (0, 1, 2, 5, A, E, F, G, H, I, J, K, L, M, P,Q, U, V, W, Y, Z, &, or £)
        G - Flow controller (0, 1, 2, 3, 4, 5, 6, 7, 8, 9, A, B, or C)
        H - Button/trigger cover (any single alpha or numeric character)
       II - Faceplate style (16, 51, A1, A2, A4, A6, A7, B1, B2,B3, B4, P1, P3, or P5)
        J - Packaging (any single digit number)
        K - Screen washer type (0, 1, or 2)
        L - Unassigned (any single digit number)
       MM - Trigger cover insert (any two alpha or numeric characters)
        N - Custom version (any single digit number)

[19] AAAA - Color (any four digit number)
       BB - Signum style wand (BK, MB, MN, MX, SB, SL, SR, or ST)
       CC - Waterway 1 (A1, A2, A3, A4, B1, B2, B3, F1, F3, G1,G2, M1, or M2)
        D - Waterway 1.1 (0, 1, 2, 3, or 4)
        E - Cap (1 or 2)
        F - Circular insert (1, 2, 3, or 4)
        G - Spring (0, 1, 2, 4 or 6)
        H - Aerator (0, 1, 2, 3, 4, 5, 6, 7, 8, 9, A, B, C, E, J, T or Q)
        I - Diverter stem assembly (1, 2, 3, or 4)
        J - Flow controller (0, 1, 2, 3, 4, 5, 6, 7, 8, 9, A, B,C, E, or F)
        K - Button/trigger cover (any single alpha or numeric character)
       LL - Faceplate style (A1, A2, A3, B1, B2, B3, C1, C2, C3, D0, D1, D2, D3, D4, 
            D5, D6, D7, D8, D9, E1, E2 E3, or E4)
        M - Packaging (any single digit number)
        N - Screen washer type (0, 1, 2, or M)

[20] AAAA - Color (any four digit number)
        B - Grafic style wand (G)
        C - Waterway (1, 2, 3, 4, 5, 6, 7, A, B, C, G, H, L, M, N, or P)
        D - Circular insert (1 or 2)
        E - Spring (0, 2, 3 or 4)
        F - Aerator (0, 1, 2, 5, A, E, F, G, H, I, J, K, L, M, P, Q, U, V, W, Y, Z, &, 
            or £)
        G - Flow controller (0, 1, 2, 3, 4, 5, 6, 7, 8, 9, A, B, or C)
        H - Button/trigger cover (any single alpha or numeric character)
       II - Faceplate style (01, 03, 12, 13, 14, 15, 16, 17, 18,or 23)
        J - Packaging (any single digit number)
        K - Screen washer type (0,1, or 2)

[21] AAAA - Color (any alpha numeric characters)
       BB - Idea Style wand (IB, IC, ID, IG, IL, IO, IY, or IZ)
        C - Waterway (0, 1, 2, 3, 4, 5, 6, 7, 8 or 9)
        D - Distributor (1, 2, 3, 4, 5, 6, 7, 8, or 9)
        E - Spring (0, 1, 2, or 3)
        F - Aerator (0, 1, 2, 5, A, E, F, G, H, I, J, K, L, M, N, P, Q, U, V, W, Y, Z, 
            &, or £)
        G - Flow controller (0, 1, 2, 3, 4, 5, 6, 7, 8, 9, A, C, or D)
        H - Button/trigger cover (any single alpha or numeric character)
       II - Faceplate style (16, 51, A1, A2, A4, A6, A7, B1, B2,B3, B4, P1,P2, P3, or P5)
        J - Packaging (any single digit number)
        K - Screen washer type (0, 1, 2, or A)

[22] AAAA - Color (any four digit number)
       BB - Liberty style wand (LB)
        C - Waterway (5, 6, 7, 8, 9, C, E, G, H, K, L, M, N, P, R, T, U, or V)
        D - Circular insert (4 or 5)
        E - Spring (0, 2, 3 or 4)
        F - Aerator (0, 1, 2, 5, A, E, F, G, H, I, J, K, L, M, P, Q, U, V, W, Y, Z, 
            &, or £)
        G - Flow controller (0, 1, 2, 3, 4, 5, 6, 7, 8, 9, A, B, or C)
        H - Button/trigger cover (any single alpha or numeric character)
       II - Faceplate style (16, 51, A1, A2, A3, A4, A6, A7, B1,B2, B3, B4, P1, P2, P3, 
             or P5)
        J - Packaging (any single digit number)
        K - Screen washer type (0, 1, or 2)
        L - Handle ring trim (any single alpha or numeric character)
       MM - Handle (any two alpha or numeric characters)
        N - Head ring trim (any single alpha or numeric character)

[23] AAAA - Color (any four digit number)
        B - Studio style wand (S, Z, or K)
        C - Waterway (1, 2, 3, 4, 5, 6, 7, 8, 9, B, C, E, G, H, K, L, M, N, P, R, 
            T, V, or W)
        D - Circular insert (4 or 5)
        E - Spring (0, 1, 2, 3, or 4)
        F - Aerator (0, 1, 2, 5, A, E, F, G, H, I, J, K, L, M, P, Q, U, V, W, Y, Z, 
            &, or £)
        G - Flow controller (0, 1, 2, 3, 4, 5, 6, 7, 8, 9, A, B, or C)
        H - Button/trigger cover (any single alpha or numeric character)
       II - Faceplate style (16, 51, A1, A2, A4, A6, A7, B1, B2,B3, B4, P1, P2, P3, or P5)
        J - Packaging (any single digit number)
        K - Screen washer type (0, 1, or 2)

[24] AAAA - color (any four digit number)
       BB - Victoria style wand (VI or VA)
        C - Waterway (5, 6, 8, 9, C, E, G, H, K, L, M, N, P, R, T, U, or V)
        D - Circular insert (4 or 5)
        E - Spring (0, 2, 3, or 4)
        F - Aerator (0, 1, 2, 5, A, E, F, G, H, I, J, K, L, M, P, Q, U, V, W, Y, Z, 
            &, or £)
        G - Flow controller (0, 1, 2, 3, 4, 5 , 6, 7, 8, 9, A, B, or C)
        H - Button/trigger cover (any single alpha or numeric character)
       II - Faceplate style (16, 51, A1, A2, A4, A6, A7, B1, B2,B3, B4, P1, P3, or P5)
        J - Packaging (any single digit number)
        K - Screen washer type (0, 1, or 2)
        L - Grip (any single alpha or numeric character)
       MM - (any two alpha or numeric characters)
        N - Custom version (any single alpha or numeric character)

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.
[Q] This product meets the reduced Q test statistic criteria of 1 µg or 0.5 µg for lead per
    Section 9.5.1.1 of NSF/ANSI/CAN 61.

[2] Certified for a maximum surface area to volume ratio of 2.0 sq. in./L.

[1] This product does not require a Q statistic. It is made from material or materials that
    do not require lead analysis when reviewed per NSF/ANSI/CAN Standard 61, Section 3.3.

[1] The * in the trade name will be replaced with a one or two digit alpha-numeric or
    numeric code shown below:
    04N - 3 1/2" Gooseneck spout
    06N - 5 1/2" Gooseneck spout
    09N - 8 1/2" Gooseneck spout
    06  - 6" Spout
    08  - 8" Spout
    10  - 10" Spout
    12  - 12" Spout
    14  - 14" Spout
    16  - 16" Spout
    18  - 18" Spout
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.
[Q] This product meets the reduced Q test statistic criteria of 1 µg or 0.5 µg for lead per
    Section 9.5.1.1 of NSF/ANSI/CAN 61.

[2] These models are NSF Certified faucet components.  The assembly of components do not
    constitute a NSF Certified faucet.  Complete faucet assemblies are NSF Certified only if
    the assembled faucet appears in NSF Listings.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.
[Q] This product meets the reduced Q test statistic criteria of 1 µg or 0.5 µg for lead per
    Section 9.5.1.1 of NSF/ANSI/CAN 61.

[1] 12X X-X -X-X-X -X-X -01, Metal Double lock Shower hose, Size:DN8, F1/2 x F1/2
    Note:
    1st X - Code for hose end use
            1 – Shower Hose
            0 – Other
    2nd & 3rd X - length (20 - 72 inches)
    4th X - Code for the hose color
            01 - Polish Stainless Steel hose
            02 - Chrome Plating Stainless Steel hose
            03 - PB Stainless Steel hose
            04 - BNP Stainless Steel hose
            05 - PVD Stainless Steel hose
            06 - Black Stainless Steel hose
            07 - White Stainless Steel hose
            08 - Copper Stainless Steel hose
            09 - Chrome Plating Brass hose
            10 - PB Brass hose
            11 - BNP Brass hose
            12 - PVD Brass hose
            13 - Black Brass hose
            14 - White Brass hose
            15 - Copper Brass hose
    5th X - Code for inlet
            1 - F1/2 Brass R-crossline nut
            2 - F1/2 Brass R-crossline nut (O-Ring)
            3 - F1/2 Brass R-hexagon nut
            4 - F1/2 Brass knurling nut
            5 - F1/2 Brass knurling nut (trapeziform)
            6 - F1/2 Brass straight-knurling nut
            7 - F1/2 Brass hexagon nut
    6th X - Code for outlet
            1 - F1/2 Brass R-crossline nut
            2 - F1/2 Brass R-crossline nut (O-Ring)
            3 - F1/2 Brass swivel R-crossline nut
            4 - F1/2 Brass swivel R-crossline nut (O-Ring)
            5 - F1/2 Brass knurling R-crossline nut
            6 - F1/2 Brass knurling swivel R-crossline nut
    7th X - Nut finish
            1 - Polish
            2 - Chrome Plating
            3 - PB
            4 - BNP
            5 - PVD
            6 - Black
            7 - White
            8 - Red-bronze
    8th X - Nipple material
            0 - Brass
            2 - Stainless Steel
[2] 137- X-X -X -X -X-X-X
    
    1st & 2nd X - Length (3.9 - 80in)
    
    3rd X - Code for the Finish
            02 - Grey
            04 - Black
    
    4th X - Code for fittings used
            01 - F1/2
            02 – F1/4
            03 - F3/4
            04 – F3/8
            05 - F5/8
            06 – F7/8
            07 – F7/8 Plastic Nut
            08 - F7/16
            09 – F9/16
            10 - F11/16
            11 - F15/16
            12 - F15/16 Plastic Nut
            13 - F1
            14 - F15
            15 - F16
            16 - F18
            17 - F3/8 ELBOW
            18 - F1/2 ELBOW
            19 - Ball Joint
            20 - M1/4
            21 - M3/4
            22 - M1/8
            23 - M3/8
            24 - M5/8
            25 - M7/8
            26 - M5/16
            27 - M9/16
            28 - M11/16
            29 - M13/16
            30 - M9/32
            31 - M8
            32 - M9
            33 - M10
            34 - M11
            35 - M12
            36 - M13
            37 - M14
            38 - M15
            39 - M20
            40 - M22
            41 - M23
            42 - 3-way connecter
            43 - F-quick connective
            44 - M-quick connective
            45 - M-quick connective Plastic
    
    5th X - Code for fittings used
            01 - F1/2
            02 – F1/4
            03 - F3/4
            04 – F3/8
            05 - F5/8
            06 – F7/8
            07 – F7/8 Plastic Nut
            08 - F7/16
            09 – F9/16
            10 - F11/16
            11 - F15/16
            12 - F15/16 Plastic Nut
            13 - F1
            14 - F15
            15 - F16
            16 - F18
            17 - F3/8 ELBOW
            18 - F1/2 ELBOW
            19 - Ball Joint
            20 - M1/4
            21 - M3/4
            22 - M1/8
            23 - M3/8
            24 - M5/8
            25 - M7/8
            26 - M5/16
            27 - M9/16
            28 - M11/16
            29 - M13/16
            30 - M9/32
            31 - M8
            32 - M9
            33 - M10
            34 - M11
            35 - M12
            36 - M13
            37 - M14
            38 - M15
            39 - M20
            40 - M22
            41 - M23
            42 - 3-way connecter
            43 - F-quick connective
            44 - M-quick connective
            45 - M-quick connective Plastic
    
    6th X - Code for DN
            0 - DN8
    
    7th X - Code for Package
[3] 138-X-X-X-X-X-X-X
    
    1st & 2nd X - Length (3.9 – 80inch)
    
    3rd X - Code for the Finish
            01 - Natural
            02 - Grey
            04 - Black
            14 - CP
            16 - BN
            25 - Nickel
            26 - SUS
            36 - Red
            37 - Blue
    
    4th and 5th X - Codes for fittings used
                    01 - F1/2
                    02 – F1/4
                    03 - F3/4
                    04 – F3/8
                    05 - F5/8
                    06 – F7/8 
                    07 – F7/8 Plastic Nut
                    08 - F7/16
                    09 – F9/16
                    10 - F11/16
                    11 - F15/16
                    12 - F15/16 Plastic Nut
                    13 - F1
                    14 - F15
                    15 - F16
                    16 - F18
                    17 - F3/8 ELBOW
                    18 - F1/2 ELBOW
                    19 - Ball Joint
                    20 - M1/4
                    21 - M3/4
                    22 - M1/8
                    23 - M3/8
                    24 - M5/8
                    25 - M7/8
                    26 - M5/16
                    27 - M9/16
                    28 - M11/16
                    29 - M13/16
                    30 - M9/32
                    31 - M8
                    32 - M9
                    33 - M10
                    34 - M11
                    35 - M12
                    36 - M13
                    37 - M14
                    38 - M15
                    39 - M20
                    40 - M22
                    41 - M23
                    42 - 3-way connecter
                    43 - F-quick connective
                    44 - M-quick connective
                    45 - M-quick connective Plastic
    
    6th X - Code for DN
            0 - DN8
            1 - DN6
    
    7th X - Code for Package
[4] 13X- X-X -X -X -X-01, Flexible hose / water connectors hose , Size:DN8,
    Note:
    1st X – Code for hose end use
            1 – Faucet Hose 
            2 – Drinking machine hose
            3 – Toilet supply line
            4 – Bason supply line
            5 – Shower hose
            6 – Ice maker supply line
            0 – Other
    2nd & 3rd X - Length (6 - 72 inches)
    4th X - Code for the Finish
            02 - Grey
            04 - Black
            26 - SUS
            36 - Red
            37 - Blue
    5th X - Code for fittings used
            01 - F1/2
            02 - F3/8
            03 - F3/4
            04 - F9/16(F3/8in.Comp)
            05 - F5/8
            06 - F15/16
            07 - F15/16 Plastic Nut
            08 - F7/8
            09 - F7/8 Plastic Nut
            10 - F1/2 ELBOW
            11 - F3/8 ELBOW
            12 - F1/4
            13 - F11/16
            14 - F7/16
            15 - F9/16
            16 - F1
            17 - M1/2
            18 - M3/8
            19 - M3/4
            20 - M9/16
            21 - M5/8
            22 - M5/16
            23 - M11/16
            24 - M13/16
            25 - M8
            26 - M9
            28 - M12
            29 - M15
            30 - M16
            31 - M23
            32 - M1/4
            33 - M1/8
            34 - M1
            35 - Quick Connective
            36 - Quick Connective Plastic
            37 - Ball Joint
    6th X - Code for fittings used
            01 - F1/2
            02 - F3/8
            03 - F3/4
            04 - F9/16(F3/8in.Comp)
            05 - F5/8
            06 - F15/16
            07 - F15/16 Plastic Nut 
            08 - F7/8
            09 - F7/8 Plastic Nut
            10 - F1/2 ELBOW
            11 - F3/8 ELBOW
            12 - F1/4
            13 - F11/16
            14 - F7/16
            15 - F9/16
            16 - F1
            17 - M1/2
            18 - M3/8
            19 - M3/4
            20 - M9/16
            21 - M5/8
            22 - M5/16
            23 - M11/16
            24 - M13/16
            25 - M8
            26 - M9
            27 - M10
            28 - M12
            29 - M15
            30 - M16
            31 - M23
            32 - M1/4
            33 - M1/8
            34 - M1
            35 - Quick Connective
            36 - Quick Connective Plastic
            37 - Ball Joint
[5] 14X- X-X -X-X-X -X-X-01, PVC Spiral hose , Size:DN8, F1/2 x F1/2
    Note :
    1st X - Code for hose end use
            1 – Shower Hose
            2 – Drinking machine hose
            3 – Toilet supply line
            4 – Bason supply line
            5 – Faucet hose
            6 – Ice maker supply line
            0 – Other
    2nd & 3rd X - length (20 - 72 inches)
    4th X - Hose color/description
            01 - chrome/black Concavo-convex hose
            02 - PB/black Concavo-convex hose
            03 - chrome/white Concavo-convex hose
            04 - PB/white Concavo-convex hose
            05 - white/white Concavo-convex hose
            06 - satin/nickel Concavo-convex hose
            07 - chrome/clear Concavo-convex hose
            08 - ORB Concavo-convex hose
            09 - white Reticulated hose
            10 - white/white Reticulated hose
            11 - deep gray Reticulated hose
            12 - silver gray Reticulated hose
            13 - black Reticulated hose
            14 - gold silver Reticulated hose
            15 - brown silver Reticulated hose
            16 - CP silver Reticulated hose
            17 - BNP silver Reticulated hose
            18 - chrome/black Silver hose
            19 - PB/black Silver hose
            20 - chrome/white Silver hose
            21 - PB/white Silver hose
            22 - chrome/clear Silver hose
            23 - PB/clear Silver hose
            24 - chrome/gray Silver hose
    5th X - Code for inlet
            1 - F1/2 Brass R-crossline nut
            2 - F1/2 ABS R-crossline nut
            3 - F1/2 Brass R-crossline nut (O-ring)
            4 - F1/2 Brass R-hexagon nut
            5 - F1/2 Brass knurlling nut
            6 - F1/2 Brass knurling nut (trapeziform)
            7 - F1/2 Brass straight-knurling nut
            8 - F1/2 Brass hexagon nut
            9 - M15 Brass nut
            0 - M9/16 Brass nut
    6th X - Code for outlet
            1 - F1/2 Brass R-crossline nut
            2 - F1/2 ABS R-crossline nut
            3 - F1/2 Brass R-crossline nut (O-ring)
            4 - F1/2 Brass swivel R-crossline nut
            5 - F1/2 Brass swivel R-crossline nut (O-ring)
            6 - F1/2 Brass knurling R-crossline nut 
            7 - F1/2 Brass knurling swivel R-crossline nut
    7th X - Code for the nut finish
            1 - Polish
            2 - Chrome Plating
            3 - PB
            4 - BNP
            5 - PVD
            6 - Black
            7 - White
            8 - Red-bronze
    8th X - Nipple material
            0 - Brass
            1 - POM
            2 - Stainless Steel
[6] 15X- X-X -X-X-X-01, PVC hose / Water Connector Hose
    Note :
    1st X - Code for hose end use
            1 – Faucet Hose
            2 – Drinking machine hose
            3 – Toilet supply line
            4 – Bason supply line
            5 – Shower hose
            6 – Ice maker supply line
            0 – Other
    2nd & 3rd X - Length (6 - 72 inches)
    4th X - Code for the Finish
            02 - Grey
            03 - Natural
            04 - Black
            05 - White
    5th X - Code for fittings used
            01 - F1/2
            02 - F3/8
            03 - F3/4
            04 - F9/16(F3/8in.Comp)
            05 - F5/8
            06 - F15/16
            07 - F15/16 Plastic Nut
            08 - F7/8
            09 - F7/8 Plastic Nut
            10 - F1/2 ELBOW
            11 - F3/8 ELBOW
            12 - F1/4
            13 - F11/16
            14 - F7/16
            15 - F9/16
            16 - F1
            17 - M1/2
            18 - M3/8
            19 - M3/4
            20 - M9/16
            21 - M5/8
            22 - M5/16
            23 - M11/16
[7] 15X- X-X -X-X-X-01, PVC hose / Water Connector Hose
    Note:
    5th X - Code for fittings used
    24 - M13/16
    25 - M8
    26 - M9
    27 – M10
    28 - M12
    29 - M15
    30 - M16
    31 - M23
    32 - M1/4
    3

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.
[Q] This product meets the reduced Q test statistic criteria of 1 µg or 0.5 µg for lead per
    Section 9.5.1.1 of NSF/ANSI/CAN 61.

[8] Certified for a maximum inner diameter of 0.473 inches and a maximum length of 72 inches.

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[10] Certified for an inner diameter of 0.315 inches and a maximum length of 72 inches.

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] Certified for a maximum surface area to volume ratio of 2.0 sq. in./L
[2] Only products bearing the NSF Mark on the product, product packaging, and/or
    documentation shipped with the product are Certified.

[3] xx - Hose connector length from 9" to 96".
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.
[Q] This product meets the reduced Q test statistic criteria of 0.5 µg for lead per Section
    9.5.1.1 of NSF/ANSI/CAN 61.

[2] A12, J2,  Y10, Y11, Z3,  Z9, Z12, Z17, Z40
[4] For a given part number each character represents some part of the hose.
        P - LSP ultracore Liner
        026 - extrusion size in inches (0.26'')
        x1x2 - hose length in inches
        I1 - fitting designation for end A
        Z12 - fitting designation for end B
    x3x4:
        Blank - plastic Z12 fitting
        LL - brass Z12 fitting
    Hose minimum and maximum length:
        18 - 19"
[5] For a given part number each character represents some part of the hose.
        P - LSP ultracore Liner
        026 - extrusion size in inches (0.26'')
        x1x2 - hose length in inches
        Y1 - fitting designation for end A
        Y2 - fitting designation for end B
    B:
        Black braided extrusion and low lead fittings used
        Hose minimum and maximum length:
        51 - 52"
[6] For a given part number each character represents some part of the hose.
        P - LSP ultracore Liner
        026 - extrusion size in inches (0.26'')
        x1x2 - hose length in inches
        Y23 - fitting designation for end A
        Z6 - fitting designation for end B
    Hose minimum and maximum length:
        58 - 59"
[7] For a given part number each character represents some part of the hose.
        P - LSP ultracore Liner
        026 - extrusion size in inches (0.26'')
        x1x2 - hose length in inches
        Z6 - fitting designation for end A
        Z41 - fitting designation for end B
    Hose minimum and maximum length:
        57 - 58"
[8] For a given part number each character represents some part of the hose.
        P - LSP ultracore Liner
        026 - extrusion size in inches (0.26'')
        x1x2 - hose length in inches
        Z6 - fitting designation for end A
        Z42 - fitting designation for end B
    Hose minimum and maximum length:
        19 - 20"
[9] For a given part number each character represents some part of the hose.
    P - LSP ultracore Liner
        025 - extrusion size in inches (ID = 0.25")
        x1x2 - hose length in inches
        Z9 - fitting designation for end A
        Z9 - fitting designation for end B
    Hose minimum and maximum length:
        8-9"

[1] For specific diameters of connectors beginning with P or U maximum length restrictions
    are as follows: 
    0.25 in diameter maximum tubing length - 190 in
    0.28 in diameter maximum tubing length - 170 in 
    Alpha Numeric Suffixes (i.e. J2J2) – fitting code (note: same code may be used for
    different fittings for different inner diameter of tubing – see wetted parts list)
    Connector End fitting (any two of each or any two in combination)
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.
[Q] This product meets the reduced Q test statistic criteria of 0.5 µg for lead per Section
    9.5.1.1 of NSF/ANSI/CAN 61.

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.
[Q] This product meets the reduced Q test statistic criteria of 1 µg or 0.5 µg for lead per
    Section 9.5.1.1 of NSF/ANSI/CAN 61.

[2] Certified for a maximum surface area to volume ratio of 9.5 sq. in./L.
[3] Certified for a maximum surface area to volume ratio of 30.0 sq. in./L.
[4] Product may be coated with Art-Coat Treatment

[1] This product does not require a Q statistic. It is made from material or materials that
    do not require lead analysis when reviewed per NSF/ANSI/CAN Standard 61, Section 3.3.

[2] Certified for a maximum surface area to volume ratio of 9.5 sq. in./L.
[3] Certified for a maximum surface area to volume ratio of 30.0 sq. in./L.
[4] Product may be coated with Art-Coat Treatment

[1] This product does not require a Q statistic. It is made from material or materials that
    do not require lead analysis when reviewed per NSF/ANSI/CAN Standard 61, Section 3.3.

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] This model is an NSF Certified faucet component. The assembly of components do not
    constitute a NSF Certified faucet. Complete faucet assemblies are NSF Certified only if
    the assembled faucet appears in NSF Listings.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.
[Q] This product meets the reduced Q test statistic criteria of 1 µg or 0.5 µg for lead per
    Section 9.5.1.1 of NSF/ANSI/CAN 61.

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.
[Q] This product meets the reduced Q test statistic criteria of 1 µg or 0.5 µg for lead per
    Section 9.5.1.1 of NSF/ANSI/CAN 61.

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.
[Q] This product meets the reduced Q test statistic criteria of 1 µg or 0.5 µg for lead per
    Section 9.5.1.1 of NSF/ANSI/CAN 61.

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.
[Q] This product meets the reduced Q test statistic criteria of 1 µg or 0.5 µg for lead per
    Section 9.5.1.1 of NSF/ANSI/CAN 61.

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.
[Q] This product meets the reduced Q test statistic criteria of 1 µg or 0.5 µg for lead per
    Section 9.5.1.1 of NSF/ANSI/CAN 61.

[1] This product does not require a Q statistic. It is made from material or materials that
    do not require lead analysis when reviewed per NSF/ANSI/CAN Standard 61, Section 3.3.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] Refers to Single Check Valves (non-return valves)
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] V   – End connection
          G - G 
          N - NPT
          R - O-Ring end connection
    WXY – Flow range
          050 - 0.13 … 1.3 gpm
          075 - 0.13 … 2.0 gpm
          080 - 0.50 … 2.11 gpm
          100 - 0.26 … 2.7 gpm
          150 - 0.26 … 4.0 gpm
          250 - 0.26 … 6.6 gpm
          350 - 0.53 … 9.2 gpm 
    Z   - Electrical connection
          A – 3 pin
          B – Cable, 1 meter long
          C - Cable, custom made cable length
[2] This product does not require a Q statistic. It is made from material or materials that
    do not require lead analysis when reviewed per NSF/ANSI/CAN Standard 61, Section 3.3.
[3] X - Housing
    8 - NPT
    7 - G
[4] VV       - Housing
    00 or 10 - G
    20 or 21 - Customer supplied ring
    12 0r 02 - NPT
    W        - Electrical Connection
    X        - Number of turbine blade
    XX       - Turbine type (Flow range, K-factor)
    Z        - Cable Length

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[2] Certified for a maximum surface area to volume ratio of 0.3 square inches per liter.
[3] Certified for a maximum surface area to volume ratio of 2.0 square inches per liter.

[1] This product does not require a Q statistic. It is made from material or materials that
    do not require lead analysis when reviewed per NSF/ANSI/CAN Standard 61, Section 3.3.

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.
[Q] This product meets the reduced Q test statistic criteria of 1 µg or 0.5 µg for lead per
    Section 9.5.1.1 of NSF/ANSI/CAN 61.

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.
[Q] This product meets the reduced Q test statistic criteria of 1 µg or 0.5 µg for lead per
    Section 9.5.1.1 of NSF/ANSI/CAN 61.

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.
[Q] This product meets the reduced Q test statistic criteria of 1 µg or 0.5 µg for lead per
    Section 9.5.1.1 of NSF/ANSI/CAN 61.

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.
[Q] This product meets the reduced Q test statistic criteria of 1 µg or 0.5 µg for lead per
    Section 9.5.1.1 of NSF/ANSI/CAN 61.

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.
[Q] This product meets the reduced Q test statistic criteria of 1 µg or 0.5 µg for lead per
    Section 9.5.1.1 of NSF/ANSI/CAN 61.

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.
[Q] This product meets the reduced Q test statistic criteria of 1 µg or 0.5 µg for lead per
    Section 9.5.1.1 of NSF/ANSI/CAN 61.

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.
[Q] This product meets the reduced Q test statistic criteria of 1 µg or 0.5 µg for lead per
    Section 9.5.1.1 of NSF/ANSI/CAN 61.

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.
[Q] This product meets the reduced Q test statistic criteria of 1 µg or 0.5 µg for lead per
    Section 9.5.1.1 of NSF/ANSI/CAN 61.

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.
[Q] This product meets the reduced Q test statistic criteria of 1 µg or 0.5 µg for lead per
    Section 9.5.1.1 of NSF/ANSI/CAN 61.

[1] AA - Spout type
         01 - 3 1/2" Gooseneck spout
         02 - 6" Gooseneck spout
         03 - 8 1/2" Gooseneck spout
         04 - 8 1/2" Gooseneck spout
         06 - 6" spout
         08 - 8" spout
         10 - 10" spout
         12 - 12" spout
         14 - 14" spout
         16 - 16" spout
    B  - Handle type
         A - Pot handle
         B - Lever handle
         C - Wrist blade handle
         D - Cross handle
    XX - Spout type
         00 - No spout
         01 - 3 1/2" Gooseneck spout
         02 - 6" Gooseneck spout
         03 - 8 1/2" Gooseneck spout
         04 - 8 1/2" Gooseneck spout
         06 - 6" spout
         08 - 8" spout
         10 - 10" spout
         12 - 12" spout
         14 - 14" spout
         16 - 16" spout
         18 - 18" spout
         24 - 24" spout

[2] Certified for a maximum surface area to volume ratio of 2.0 sq. in./L.

[1] This product does not require a Q statistic. It is made from material or materials that
    do not require lead analysis when reviewed per NSF/ANSI/CAN Standard 61, Section 3.3.

[2] Certified for a maximum surface area to volume ratio of 2.0 sq. in./L.

[1] This product does not require a Q statistic. It is made from material or materials that
    do not require lead analysis when reviewed per NSF/ANSI/CAN Standard 61, Section 3.3.

[Q] This product meets the reduced Q test statistic criteria of 1 µg or 0.5 µg for lead per
    Section 9.5.1.1 of NSF/ANSI/CAN 61.

[1] This certification includes NSF-61 Section 9 for Cold/Ambient temperature water
    pathways. The sparkling water pathway is not evaluated to NSF-61.
[2] The maximum operating temperature of these units is 74 F/23°C.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.
[Q] This product meets the reduced Q test statistic criteria of 1 µg or 0.5 µg for lead per
    Section 9.5.1.1 of NSF/ANSI/CAN 61.

[1] Certified for black, natural, or gray valve body.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.
[Q] This product meets the reduced Q test statistic criteria of 1 µg or 0.5 µg for lead per
    Section 9.5.1.1 of NSF/ANSI/CAN 61.

[1] Certified for black, natural, or gray valve body.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.
[Q] This product meets the reduced Q test statistic criteria of 1 µg or 0.5 µg for lead per
    Section 9.5.1.1 of NSF/ANSI/CAN 61.

[Q] This product meets the reduced Q test statistic criteria of 1 µg or 0.5 µg for lead per
    Section 9.5.1.1 of NSF/ANSI/CAN 61.

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] Fitting and appurtenance end use. Certified for a maximum surface area to volume ratio
    of 250 sq. in/L.
[2] Fitting and appurtenance end use. Certified for a maximum surface area to volume ratio
    of 185 sq. in/L.

* This product does not require a Q statistic. It is made from material or materials that
  do not require lead analysis when reviewed per NSF/ANSI/CAN Standard 61, Section 3.3.	

[1] Appurtenance end use. Certified for a maximum surface area to volume ratio of 50
    sq.in./L.
[S] '#' Indicates trade name may identify a 3-digit number in values from 111 to 999
    indicating Celanese's self-declared sustainability status of that material.

* This product does not require a Q statistic. It is made from material or materials that
  do not require lead analysis when reviewed per NSF/ANSI/CAN Standard 61, Section 3.3.

[1]  Appurtenance end use. Certified for a maximum surface area to volume ratio of 25
    sq.in./L.
[2] Appurtenance end use. Certified for a maximum surface area to volume ratio of 50
    sq.in./L.
[S] '#' Indicates trade name may identify a 3-digit number in values from 111 to 999
    indicating Celanese's self-declared sustainability status of that material.

* This product does not require a Q statistic. It is made from material or materials that
  do not require lead analysis when reviewed per NSF/ANSI/CAN Standard 61, Section 3.3.

* This product does not require a Q statistic. It is made from material or materials that
  do not require lead analysis when reviewed per NSF/ANSI/CAN Standard 61, Section 3.3.
[1] Appurtenance end use. Certified for a maximum surface area to volume ratio of 25
    sq.in./L.

[1] Appurtenance end use. Certified for a maximum surface area to volume ratio of 25
    sq.in./L.
[2] Appurtenance end use. Certified for a maximum surface area to volume ratio of 50
    sq.in./L.
[3] Appurtenance end use. Certified for a maximum surface area to volume ratio of 150 sq.
    in./L.
[4] Appurtenance and Fitting end use. Certified for a maximum surface area to volume ratio
    of 250 sq. in./L.
[S] '#' Indicates trade name may identify a 3-digit number in values from 111 to 999
    indicating Celanese's self-declared sustainability status of that material.

* This product does not require a Q statistic. It is made from material or materials that
  do not require lead analysis when reviewed per NSF/ANSI/CAN Standard 61, Section 3.3.

[1]  Appurtenance end use. Certified for a maximum surface area to volume ratio of 25
    sq.in./L.
[2] Appurtenance end use. Certified for a maximum surface area to volume ratio of 50
    sq.in./L.
[S] '#' Indicates trade name may identify a 3-digit number in values from 111 to 999
    indicating Celanese's self-declared sustainability status of that material.

* This product does not require a Q statistic. It is made from material or materials that
  do not require lead analysis when reviewed per NSF/ANSI/CAN Standard 61, Section 3.3.

* This product does not require a Q statistic. It is made from material or materials that
  do not require lead analysis when reviewed per NSF/ANSI/CAN Standard 61, Section 3.3.
[1] Appurtenance end use. Certified for a maximum surface area to volume ratio of 25
    sq.in./L.

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.
[Q] This product meets the reduced Q test statistic criteria of 1 µg for lead per Section
    9.5.1.1 of NSF/ANSI/CAN 61.

[Q] This product meets the reduced Q test statistic criteria of 1 ug or 0.5 ug for lead per
    Section 9.5.1.1 of NSF/ANSI/CAN 61.

[1] Valves are named as follows: W A B CDE F G H I WXX, where:
       
    W   -  Series W Valve
    A   -  Inlet
           2 -  MOULD BODY WITH 3/4" INLET, 3/4"(OUTPUT PUSHFIT)
           A -  MOULD WATER VALVE FITTINGS MALE 180°, G 3/4"
           B -  MOULD WATER VALVE FITTINGS MALE 180°, G 1/2"
           C -  MOULD WATER VALVE FITTINGS MALE 180°, G 3/8"
           D -  MOULD WATER VALVE FITTINGS MALE 180° CUSTOMIZE FOR KEURIG 180°, 3/4"
           F -  MOULD WATER VALVE FITTINGS MALE 90°, G 1/2"
           G -  MOULD WATER VALVE FITTINGS MALE 90°, G 3/4"
           0 -  ONLY PILOT, NO BODY
    B   -  Outlet
           2 -  MOULD BODY WITH 3/4" INLET, JG6mm
           3 -  MOULD BODY WITH 3/4" INLET, JG10mm
           4 -  MOULD BODY WITH 3/4" INLET, JG8mm
           7 -  MOULD BODY WITH 3/4" INLET, JG1/4”
           A -  MOULD WATER VALVE FITTINGS MALE 180°, G 3/4"
           B -  MOULD WATER VALVE FITTINGS MALE 180°, G 1/2"
           C -  MOULD WATER VALVE FITTINGS MALE 180°, G 3/8"
           F -  MOULD WATER VALVE FITTINGS MALE 90°, G 1/2"
           0 -  ONLY PILOT, NO BODY
    CDE - DN mm 00,0
           100 -  10 mm
    F   -  FLOW RESTRICTOR
           0 -  WITHOUT
           1 -  (1,2) liters
           2 -  (2,2) liters
    G   -  FLOW REGULATOR
           0 -  WITHOUT
    H   -  FILTER
           0 -  WITHOUT
           1 -  80 mesh
           2 -  150 mesh
           3 -  Check Valve
    I   -  CUSTOMIZATION
    0   -  WITHOUT
           1 -  WITH (SPECIAL EXECUTION)
           3 -  NEEDLE
    WXX - COIL
[2] Series W valves are solenoid valves intended for use with hot water dispensers up to 65
    degrees Celsius.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[Q] This product meets the reduced Q test statistic criteria of 1 ug or 0.5 ug for lead per
    Section 9.5.1.1 of NSF/ANSI/CAN 61.

[3] Valves are named as follows: VJ XX YY ZZZ P WWW KKKK
                    
    SERIES
      V - Fixed
      J - 3 for 3 way
          7 for 2 way
          D for Dump
                  
    VERSION
      XX - Sequential number for hydraulic connections
           (in V3 models) - 18, 19, 30, 33, 40, 53, 54, 55, 70, 73, 82, 83, 91, 92, 93, 95, 
            97, 99
           (in V7 models) - 19, 30, 31, 39, 40, 42, 43, 44, 45, 70, 82, 91, 93, 95, 99
           (in VD models) - 00, 03
                    
    KIND OF SEALING
      YY - LS for LSR liquid silicone
           VN for Silicone neutral
           EN for EPDM black
                                   
    SEAT DIAMETER - Two or three digits
      ZZ or ZZZ - Internal fluid passage diameter
                  (in V3 models ) - 10, 12, 15, 20, 25, 26, 27
                  (in V7 models) - 10, 12, 15, 20, 25
                  (in VD models) - 100
                               
    BODY TREATMENT
      P - Plastic body
             
    SPECIAL EXECUTION - Not in contact with water
      WWW - In case of NO special execution NO digit
                                    
    STANDARD COIL - Not in contact with water
      KKKK - It depends on type of coil.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[Q] This product meets the reduced Q test statistic criteria of 1 ug or 0.5 ug for lead per
    Section 9.5.1.1 of NSF/ANSI/CAN 61.

[3] L   - Series L Valve
    AAA - Version
    400 - Body thread M20*1
    500 - Body thread M22*2
    BB  - Seat Diameter
    50  - 5 mm
    CC  - Kind of Seals
    LS  - LSR Liquid Silicone
    P   - Plastic Body
    DD  - Special Execution
    EEE - Coil Type
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[Q] This product meets the reduced Q test statistic criteria of 1 ug or 0.5 ug for lead per
    Section 9.5.1.1 of NSF/ANSI/CAN 61.

[1] Valves are named as follows: W A B CDE F G H I WXX, where:
       
    W   -  Series W Valve
    A - Inlet
        2 - MOULD BODY WITH 3/4" INLET, 3/4"(OUTPUT PUSHFIT)
        A - MOULD WATER VALVE FITTINGS MALE 180°, G ¾”
        B - MOULD WATER VALVE FITTINGS MALE 180°, G ½”
        C - MOULD WATER VALVE FITTINGS MALE 180°, G 3/8"
        D - MOULD WATER VALVE FITTINGS MALE 180° CUSTOMIZE FOR KEURIG 180°, 3/4"
        F - MOULD WATER VALVE FITTINGS MALE 90°, G ½”
        G - MOULD WATER VALVE FITTINGS MALE 90°, G ¾”
        L - MOULD WATER VALVE FITTINGS, Push fit Ø6mm
        M - MOULD WATER VALVE FITTINGS, Push fit Ø8mm
        N - MOULD WATER VALVE FITTINGS, Push fit Ø10mm
        P - MOULD WATER VALVE FITTINGS, Push fit Ø1/4”
        R - MOULD WATER VALVE FITTINGS, Push fit Ø3/8”
        0 - ONLY PILOT, NO BODY
    B - Outlet
        2 - MOULD BODY WITH 3/4" INLET, JG6mm
        3 - MOULD BODY WITH 3/4" INLET, JG10mm
        4 - MOULD BODY WITH 3/4" INLET, JG8mm
        7 - MOULD BODY WITH 3/4" INLET, JG1/4”
        A - MOULD WATER VALVE FITTINGS MALE 180°, G 3/4"
        B - MOULD WATER VALVE FITTINGS MALE 180°, G 1/2"
        C - MOULD WATER VALVE FITTINGS MALE 180°, G 3/8"
        F - MOULD WATER VALVE FITTINGS MALE 90°, G 1/2"
        L - MOULD WATER VALVE FITTINGS, Push fit Ø6mm
        M - MOULD WATER VALVE FITTINGS, Push fit Ø8mm
        N - MOULD WATER VALVE FITTINGS, Push fit Ø10mm
        P - MOULD WATER VALVE FITTINGS, Push fit Ø1/4”
        R - MOULD WATER VALVE FITTINGS, Push fit Ø3/8”
        0 - ONLY PILOT, NO BODY
    CDE - DN mm 00,0
           100 -  10 mm
    F   -  FLOW RESTRICTOR
           0 -  WITHOUT
           1 -  (1,2) liters
           2 -  (2,2) liters
    G   -  FLOW REGULATOR
           0 -  WITHOUT
    H   -  FILTER
           0 -  WITHOUT
           1 -  80 mesh
           2 -  150 mesh
           3 -  Check Valve
    I   -  CUSTOMIZATION
           0 -  WITHOUT
           1 -  WITH (SPECIAL EXECUTION
           3 -  NEEDLE
    WXX -  COIL
[2] Series W valves are solenoid valves intended for use with hot water dispensers up to 65
    degrees Celsius.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[Q] This product meets the reduced Q test statistic criteria of 1 ug or 0.5 ug for lead per
    Section 9.5.1.1 of NSF/ANSI/CAN 61.

[1] Valves are named as follows: VJ XX YY ZZZ P WWW KKKK
    
    SERIES
    V - Fixed
    J - 3 for 3 way
    7 for 2 way
    
    VERSION
    XX - Sequential number for hydraulic connections
         (in V3 models) - 18, 19, 30, 40, 53, 54, 55, 70, 73, 82, 83, 91, 92, 93, 95, 97, 99
         (in V7 models) - 19, 30, 31, 39, 40, 42, 43, 44, 45, 70, 82, 91, 93, 95, 99
      
    KIND OF SEALING
    YY - LS for LSR liquid silicone
    VN for Silicone neutral
    EN for EPDM black
                      
    SEAT DIAMETER - Two or three digits
    ZZ or ZZZ - Internal fluid passage diameter
                (in V3 models ) - 10, 12, 15, 20, 25, 26, 27
                (in V7 models) - 10, 12, 15, 20, 25
                    
    BODY TREATMENT
    P - Plastic body
    
    SPECIAL EXECUTION - Not in contact with water
    WWW - In case of NO special execution NO digit
                  
    STANDARD COIL - Not in contact with water
    KKKK          - It depends on type of coil.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] Certified for a maximum surface area to volume ratio of 10 sq. in./L.
[Q] This product meets the reduced Q test statistic criteria of 1 µg or 0.5 µg for lead per
    Section 9.5.1.1 of NSF/ANSI/CAN 61.

[1] Certified for a maximum surface area to volume ratio of 10 sq. in./L.
[Q] This product meets the reduced Q test statistic criteria of 1 µg or 0.5 µg for lead per
    Section 9.5.1.1 of NSF/ANSI/CAN 61.

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.
[Q] This product meets the reduced Q test statistic criteria of 1 µg or 0.5 µg for lead per
    Section 9.5.1.1 of NSF/ANSI/CAN 61.

[12] KLnn-xxxx-yyyyy where:     
            
          x1 = 1 (Pre-Rinse)
          x2 = 0 (compression valves)                                                        
         
           
          x3x4 = spout lengths up to 28""                                                    
         
                     
          y1y2y3­ or y1y2y3y4y5 = Can include ANY combination(s) of the following:  
           y1 - S (Swivel Spout)
           y2 - 0 (no aerator)
           y3 - 1 (Lever Handle)   
                   2 (Cross Handle)
                   4 (4" Wrist Handle) 
                   5 (Lever Handle W/ Tamper Proof Screw)
                   6 (6" Wrist Handle)
                   7 (4" Wrist Handle W/ Tamper Proof Screw)
                   8 (6" Wrist Handle W/ Tamper Proof Screw)
          (Blank) - Default
          BR - Wall Bracket
          BS - Wall Bracket w/ S/S Spring
          B60 - Wall Bracket W/ 60"" Hose
          B60Z - Wall Bracket W/ 60"" Hose & Special Packaging
          FG -  Customer Code                                   
          AF1 – Add-on Faucet w/6” Spout
          AF2 – Add-on Faucet w/8” Spout
          AF3 – Add-on Faucet w/10” Spout
          AF4 – Add-on Faucet w/12” Spout
          AF5 – Add-on Faucet w/14” Spout
          AF6 – Add-on Faucet w/16” Spout
          AF7 – Add-on Faucet w/18” Spout
          MK - Mounting Kit (KL40-3400 or KL40-3410)
          01 to 99 number strings - Customer Codes
          AA thru YY character strings - Customer Codes
          Z - Suffix denotes special packaging as an option

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.
[Q] This product meets the reduced Q test statistic criteria of 1 µg or 0.5 µg for lead per
    Section 9.5.1.1 of NSF/ANSI/CAN 61.

[3] Certified for a maximum surface area to volume ratio of 0.2 sq. in./L.

[1] Only products bearing the NSF Mark on the product, product packaging, and/or
    documentation shipped with the product are Certified.
[2] This product does not require a Q statistic. It is made from material or materials that
    do not require lead analysis when reviewed per NSF/ANSI/CAN Standard 61, Section 3.3.

[1] The * in the trade name will be replaced with a one or two digit alpha-numeric or
    numeric code shown below:
       4G - 3 1/2" Gooseneck spout
       6G - 5 1/2" Gooseneck spout
       8G - 8 1/2" Gooseneck spout
       6  - 6" Spout
       8  - 8" Spout
       10 - 10" Spout
       12 - 12" Spout
       14 - 14" Spout
       16 - 16" Spout
       18 - 18" Spout
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[2] These models are NSF Certified faucet components.  The assembly of components do not
    constitute a NSF Certified faucet.  Complete faucet assemblies are NSF Certified only if
    the assembled faucet appears in NSF Listings.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] The * in the trade name will be replaced with a one or two digit alpha-numeric or
    numeric code shown below:
       4G - 3 1/2" Gooseneck spout
       6G - 5 1/2" Gooseneck spout
       8G - 8 1/2" Gooseneck spout
       6  - 6" Spout
       8  - 8" Spout
       10 - 10" Spout
       12 - 12" Spout
       14 - 14" Spout
       16 - 16" Spout
       18 - 18" Spout
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[Q] This product meets the reduced Q test statistic criteria of 1 µg or 0.5 µg for lead per
    Section 9.5.1.1 of NSF/ANSI/CAN 61.

[1] Trade Names - Description
    MFD-A(XX) - TPV / ID .255" Monofilament braided Pullout Hose, QC x QC 
    MTK-A(XX) - PEX / ID .255" HOSE BIDET MONOFIL.BLACK 1/2"X1/2"
    MFK-B(XX) - TPSiV / ID .250" POLYMER BRAIDED HOSE - SPOUT QC X OUTLET M18.5
    MFK-C(XX) - TPSiV / ID .250" POLYMER BRAIDED HOSE - SPOUT QC X M10
    MFK-D(XX) - TPSiV/ ID .250" POLYMER BRAIDED HOSE - SPOUT QC X OUTLET M18.5
    MFK-E(XX) - TPSiV / ID .250", POLYMER BRAIDED HOSE - SPOUT QC X OUTLET M18.5
    MFK-F(XX) - TPSiV / ID .300", PULL DOWN HOSE M12 X PARABOLIC NUT WITH RING
    MF-K(XX)  - TPSiV / ID .300", COFLEX IND. MONOFIL BLACK M12 X PARAB NUT X 59"
    First letter indicates braiding material
    M  - Monofilament braiding
    XX - Length in inches
    
    Certified to the following minimum through maximum length for TPV inliner: 
    ID 0.245 in.: 20 in. through 80 in.
    ID 0.255 in.: 20 in. through 80 in.
    Certified for the following minimum through maximum length for TPSiV Inliner: 
    ID 0.250 in.: 31 in. through 80 in.
    ID 0.300 in.: 31 in. through 70 in.
    Certified to the following minimum through maximum length for PEX in-liner: 
    ID 0.255 in: 20 in. through 60 in.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] Z - Special packaging

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.
[Q] This product meets the reduced Q test statistic criteria of 1 µg or 0.5 µg for lead per
    Section 9.5.1.1 of NSF/ANSI/CAN 61.
[15] KL - xxxx-yyyyy where:     
       
     x1 - 1 (Pre-Rinse)
     x2 - 0 (compression valves)                                                             
      
     x3x4 - spout lengths up to 28""                                                         
                
     y1y2y3­ or y1y2y3y4y5 - Can include ANY combination(s) of the following:  
      y1 - S (Swivel Spout)
      y2 - 0 (no aerator)
      y3 - 1 (Lever Handle)   
              2 (Cross Handle)
              4 (4" Wrist Handle) 
              5 (Lever Handle W/ Tamper Proof Screw)
              6 (6" Wrist Handle)
              7 (4" Wrist Handle W/ Tamper Proof Screw)
              8 (6" Wrist Handle W/ Tamper Proof Screw)
     (Blank) - Default
     BR - Wall Bracket
     BS - Wall Bracket w/ S/S Spring
     B60 - Wall Bracket W/ 60"" Hose
     B60Z - Wall Bracket W/ 60"" Hose & Special Packaging
     FG -  Customer Code                                   
     AF1 – Add-on Faucet w/6” Spout
     AF2 – Add-on Faucet w/8” Spout
     AF3 – Add-on Faucet w/10” Spout
     AF4 – Add-on Faucet w/12” Spout
     AF5 – Add-on Faucet w/14” Spout
     AF6 – Add-on Faucet w/16” Spout
     AF7 – Add-on Faucet w/18” Spout
     MK - Mounting Kit (KL40-3400 or KL40-3410)
     01 to 99 number strings - Customer Codes
     AA thru YY character strings - Customer Codes
     Z - Suffix denotes special packaging as an option
[18] Pre-Rinse Assemblies using Power Pulse Spray Assembly will follow the format
     KLPnn-1xxx-yyyyy where:
     nn   - 50, 53, 56, 60, 63, 66, 69, 71, 73
     x1   - 1 (Pre-Rinse)
     x2   - 0 (compression valve) 
            1 (ceramic valve)
     x3x4 - L1 (.45 GPM Power pulse spray)
            L2 (.65 GPM Power pulse spray)
            L3 (.74 GPM Power pulse spray)
            L4 (1.05 GPM Power pulse spray)
     yyyyy - AF1 – Add-on faucet w/6" spout
             AF2 – Add-on faucet w/8" spout
             AF3 – Add-on faucet w/10" spout
             AF4 – Add-on faucet w/12" spout
             AF5 – Add-on faucet w/14" spout
             AF6 – Add-on faucet w/16" spout
             AF7 – Add-on faucet w/18" spout
             (Blank) – w/o wall bracket
             BR  – w/ wall bracket
             MK – Mounting kit
[44] KLnn-XXXX-YYY
     nn = Type
     52 – Double Pantry Faucet W/ Elevated Swing Spout
     58 – 4” Adjustable Center Deck Mount Faucet W/ Elevated Swing Spout
     62 – 8” Adjustable Center Deck Mount Faucet W/ Elevated Swing Spout
     65 – Single Pantry Faucet W/ Elevated Swing Spout
     65 – Single Pantry Faucet W/ Elevated Swing Spout & Mixing Valve
     X1 = Inlet
     4 – 4” Deck Mount Faucet
     8 – 8” Deck Mount Faucet
     9 – Single or Double Pantry Faucet
     X2 = Valve Type
     0 – Compression
     1 – Ceramic
     X3X4 = Spouts
     06 – 6” Spout
     08 – 8” Spout
     10 – 10” Spout
     12 – 12” Spout
     14 – 14” Spout
     16 – 16” Spout
     18 – 18” Spout
     20 – 20” Spout
     22 – 22” Spout
     24 – 24” Spout
     26 – 26” Spout
     28 – 28” Spout
     Y1 = S (Swivel Spout)
     Y2 = Aerator
     A – 0.5 GPM PCA Spray Vandal Resistant
     B – 1.5 GPM Max Laminar Antimicrobial and Vandal Resistant
     C – 0.5 GPM PCA Spray
     D – 1.5 GPM Max Laminar Antimicrobial
     E – 2.2 GPM Max Aerated Stream
     F – 2.2 GPM Max Aerated Stream Vandal Resistant
     Y3 = Handle Type
     1 – Standard Encore Lever
     2 – Cross
     4 – 4” Wrist Blade
     5 – Standard Lever W/ Tamper Proof Screw
     6 – 6” Wrist Blade
     7 – 4” Wrist Blade W/ Tamper Proof Screw
     8 – 6” Wrist Blade W/ Tamper Proof Screw
[45] KLnn-xxxx-yyy:
     
     X1 = 7 (Add-on Faucet)
     X2 = 0 (Compression Valve)
     X3x4 = Spouts
     00 – Standard
     06 – 6” Spout
     08 – 8” Spout
     10 – 10” Spout
     12 – 12” Spout
     14 – 14” Spout
     16 – 16” Spout
     18 – 18” Spout
     Y1 = S (Swivel Spout)
     Y2 = Aerator
     A – 0.5 GPM PCA Spray Vandal Resistant
     B – 1.5 GPM Max Laminar Antimicrobial and Vandal Resistant
     C – 0.5 GPM PCA Spray
     D – 1.5 GPM Max Laminar Antimicrobial
     E – 2.2 GPM Max Aerated Stream
     F – 2.2 GPM Max Aerated Stream Vandal Resistant
     Y3 = Handle Type
     1 – Standard Encore Lever
     2 – Cross
     4 – 4” Wrist Blade
     5 – Standard Lever W/ Tamper Proof Screw
     6 – 6” Wrist Blade
     7 – 4” Wrist Blade W/ Tamper Proof Screw
     8 – 6” Wrist Blade W/ Tamper Proof Screw
[47] KLnn-XXXX-YYY
     nn = Type
     62 – 8” Adjustable Center Deck Mount Faucet W/ Elevated Swing Spout
     X1 = Inlet
     4 – 4” Deck Mount Faucet
     8 – 8” Deck Mount Faucet
     9 – Single or Double Pantry Faucet
     X2 = Valve Type
     0 – Compression
     1 – Ceramic
     X3X4 = Spouts
     06 – 6” Spout
     08 – 8” Spout
     10 – 10” Spout
     12 – 12” Spout
     14 – 14” Spout
     16 – 16” Spout
     18 – 18” Spout
     20 – 20” Spout
     22 – 22” Spout
     24 – 24” Spout
     26 – 26” Spout
     28 – 28” Spout
     Y1 = S (Swivel Spout)
     Y2 = Aerator
     A – 0.5 GPM PCA Spray Vandal Resistant
     B – 1.5 GPM Max Laminar Antimicrobial and Vandal Resistant
     C – 0.5 GPM PCA Spray
     D – 1.5 GPM Max Laminar Antimicrobial
     E – 2.2 GPM Max Aerated Stream
     F – 2.2 GPM Max Aerated Stream Vandal Resistant
     Y3 = Handle Type
     1 – Standard Encore Lever
     2 – Cross
     4 – 4” Wrist Blade
     5 – Standard Lever W/ Tamper Proof Screw
     6 – 6” Wrist Blade
     7 – 4” Wrist Blade W/ Tamper Proof Screw
     8 – 6” Wrist Blade W/ Tamper Proof Screw
[48] KLnn-XXXX-YYY
     nn = Type
     65 – Single Pantry Faucet W/ Elevated Swing Spout
     X1 = Inlet
     4 – 4” Deck Mount Faucet
     8 – 8” Deck Mount Faucet
     9 – Single or Double Pantry Faucet
     X2 = Valve Type
     0 – Compression
     1 – Ceramic
     X3X4 = Spouts
     06 – 6” Spout
     08 – 8” Spout
     10 – 10” Spout
     12 – 12” Spout
     14 – 14” Spout
     16 – 16” Spout
     18 – 18” Spout
     20 – 20” Spout
     22 – 22” Spout
     24 – 24” Spout
     26 – 26” Spout
     28 – 28” Spout
     Y1 = S (Swivel Spout)
     Y2 = Aerator
     A – 0.5 GPM PCA Spray Vandal Resistant
     B – 1.5 GPM Max Laminar Antimicrobial and Vandal Resistant
     C – 0.5 GPM PCA Spray
     D – 1.5 GPM Max Laminar Antimicrobial
     E – 2.2 GPM Max Aerated Stream
     F – 2.2 GPM Max Aerated Stream Vandal Resistant
     Y3 = Handle Type
     1 – Standard Encore Lever
     2 – Cross
     4 – 4” Wrist Blade
     5 – Standard Lever W/ Tamper Proof Screw
     6 – 6” Wrist Blade
     7 – 4” Wrist Blade W/ Tamper Proof Screw
     8 – 6” Wrist Blade W/ Tamper Proof Screw
[86] KL45-XXXX-YYYYY
     L45   - Encore wall mount faucet, (Special Front Mount)
     X1    – Inlet 
             5 - 4" c/c with 3/8" Compression inlet
     X2    – Valve 
             0 - 1/4 Turn Standard Encore® Compression Valve
     X3X4 – Spout 
            00 - 3 1/2" gooseneck spout
            06 - 6" straight tubular or straight cast spout
            10 - 10" straight tubular spout
            18 - 18" double jointed tubular spout
     Spout Types (for KL45 Series)
     Y1   – Spout style 
            S - Swivel tubular spout
      
     Y2   – Aerator
            E - 2.2 GPM MAX aerated stream
               
     Y3Y4Y5 – Handle OR Alternate Combinations/Additional Codes (when required) 
     1 - Standard Encore® lever
     AA TO ZZ - CUSTOMER CODE         
     SP - SPECIAL PACKAGING
     SP1-9 - SPECIAL PACKAGING
     Z - SPECIAL PACKAGING
     P - CUSTOMER CODE
     T – CUSTOMER CODE
     H – S/S Braided Flex Hose 20"

[1] Z - Special packaging

[1] Z - Special packaging

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] Z - Special packaging
[2] Optional exterior coating SANI-GUARD™.
[3] These models are NSF Certified faucet components.  The assembly of components does not
    constitute a NSF Certified faucet.  Complete faucet assemblies are NSF Certified only if
    the assembled faucet appears in NSF Listings.

[3] These models are NSF Certified faucet components.  The assembly of components does not
    constitute a NSF Certified faucet.  Complete faucet assemblies are NSF Certified only if
    the assembled faucet appears in NSF Listings.
[9] Knnn - X1X2X3X4-Y1Y2Y3:
    nnn  - Faucet series 

           L41 - Encore deck mount faucet

           L45 - Encore wall mount faucet 

    X1   – Inlet 

           4 - 4" c/c with 1/2" NPSM inlets

           8 - 8" c/c with 1/2" NPSM inlets

    X2   – Valve 

           0 - 1/4 Turn Standard Encore® Compression Valve

           1 - 1/4 Turn Encore® Ceramic Valve 

    X3X4 – Spout 

           00 - 3 1/2" gooseneck spout

           01 - 8 1/2" gooseneck spout

           02 - 6" gooseneck spout

           05 - 5" straight cast spout

           06 - 6" straight spout

           08 - 8" straight spout

           09 - 9" tubular spout

           10 - 10" straight spout

           12 - 12" straight spout

           13 - 13" double jointed spout 

           18 - 18" double jointed spout

           50 - 6" spout 3/8" NPT x 2" riser

           51 - 8" spout 3/8" NPT x 2" riser

           52 - 12" spout 3/8" NPT x 2" riser

           53 - 6" spout 3/8" NPT x 9" riser

           54 - 8" spout 3/8" NPT x 9" riser

           56 - 12" spout 3/8" NPT x 9" riser

    "-"  – Universal Type Faucet Body (When Required):
           U - 1/2" NPSM inlets with Straight Fittings (for KL41 Series)
           U - 1/2" NPSM inlets with 90° Swivel Spout Base & Elbow  
           Fittings (for KL45 Series)
    Y1   – Spout style 
           A - Swivel arched cast spout
           B - Swivel bent riser tubular spout
           C - Cast spout 
           D - Double jointed cast spout
           G - Vacuum breaker w/ swivel riser & tubular spout 3/8" NPT outlet 
           K - Vacuum breaker w/ rigid riser & tubular spout 3/8" NPT outlet
           R - Rigid tubular spout
           S - Swivel tubular spout
           T - Swivel cast spout
    Y2   – Aerator 
           A - 0.5 GPM PCA spray vandal resistant
           B - 1.5 GPM MAX laminar vandal resistant
           C - 0.5 GPM PCA spray
           D - 1.5 GPM MAX laminar
           E - 2.2 GPM MAX aerated stream
           F - 2.2 GPM MAX aerated stream vandal resistant
           R - 3/8" threaded aerator (spout styles G and K only)
           T - Serrated tip for hose (spout styles G and K only)
    Y3   – Handle 
           1 - Standard Encore® lever
           2 - Cross
           4 - 4" wrist blade
           5 - Standard lever w/ tamper proof screw
           6 - 6" wrist blade
           7 - 4" wrist blade w/ tamper proof screw 
           8 - 6" wrist blade w/ tamper proof screw
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.
[Q] This product meets the reduced Q test statistic criteria of 1 µg or 0.5 µg for lead per
    Section 9.5.1.1 of NSF/ANSI/CAN 61.

[1] Z - Special packaging