NSF Product and Service Listings

[1] MFC - are models with capped outlets
    MFO - are models without capped outlets
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] Only products bearing the NSF Mark on the product, product packaging, and/or
    documentation shipped with the product are Certified.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] Only products bearing the NSF Mark on the product, product packaging, and/or
    documentation shipped with the product are Certified.
[2] Certified for the following configurations: PN16, SDR11, and 20 mm - 315 mm.
[3] Certified for the following configurations: PN16, SDR11, and 90 x 63 mm - 315 x 250 mm.
[4] The following sizes/models are certified:
    2"
    PN10/SDR17
    PN16/SDR11
    PN20/SDR9
    PN25/SDR7
    3"
    PN10/SDR17
    PN16/SDR11
    PN20/SDR9
    PN25/SDR7
    4"
    PN10/SDR17
    PN16/SDR11
    PN20/SDR9
    PN25/SDR7
    6"
    PN10/SDR17
    PN16/SDR11
    PN20/SDR9
    PN25/SDR7
    8"
    PN10/SDR17
    PN16/SDR11
    PN20/SDR9
    PN25/SDR7
    10"
    PN10/SDR17
    PN16/SDR11
    PN20/SDR9
    PN25/SDR7
    12"
    PN10/SDR17
    PN16/SDR11
    PN20/SDR9
    PN25/SDR7

[1] Only products bearing the NSF Mark on the product, product packaging, and/or
    documentation shipped with the product are Certified.

[1] MBI - MB is the FRIATEC identification for a coupler with a removable stop, I indicates
    inch size.
[2] MRI - MR is the FRIATEC identification for an e/f reducer, I indicates inch size.
[3] UBI - UB is the FRIATEC identification for a coupler without a stop, I indicates inch
    size.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] INNOGAZ and FRIALEN Brands
[2] Certification also include metric sizes for the following:
    Electrofusion Coupler - 20 – 75 mm
    Electrofusion Reducer - 25 x20 - 63x50 mm
    Electrofusion Tee with Spigot Outlet - 20 - 75 mm
[3] Certification includes the following:
    
    Elbow
    FRIALEN Elbow Sizes 1”, 1-1/4”, 2”, 4
    
    Spigot
    FRIALEN Tee (with Spigot outlet) Sizes 1", 1-1/4", 2", 4"
    
    End Cap
    FRIALEN End Cap Sizes 1", 1-1/4", 2", 4"
    
    Coupler
    E/F COUPLER 1-1/2" IPS
    E/F COUPLER 1-1/4" IPS
    E/F COUPLER 1/2" CTS
    E/F COUPLER 3/4" IPS
    E/F COUPLER 1" CTS
    E/F COUPLER 1" IPS
    E/F COUPLER 2" IPS
    E/F Coupler d20mm
    E/F Coupler d25mm
    E/F Coupler d32mm
    E/F Coupler d40mm
    E/F Coupler d50mm
    E/F Coupler d63mm
    E/F Coupler d75mm
    
    Reducer
    E/F REDUCER 1"CTS X 1/2" CTS
    E/F REDUCER 1"CTS X 3/4" IPS
    E/F REDUCER 1"IPS X 1"CTS
    E/F REDUCER 3/4" IPS X 1/2" CTS
    E/F REDUCER 2" IPS X 1-1/4" IPS
    E/F Reducer 25mm X 20mm
    E/F Reducer 32 X 20mm
    E/F Reducer 32 X 25mm
    E/F Reducer 40 X 32mm
    E/F Reducer 50 X 40mm
    E/F Reducer 63 X 32mm
    E/F Reducer 63 X 40mm
    E/F Reducer 63 X 50mm
    
    Elbow 90°
    E/F Elbow W90°d20mm
    E/F Elbow W90°d25mm
    E/F Elbow W90°d32mm
    E/F Elbow W90°d40mm
    E/F Elbow W90°d50mm
    E/F Elbow W90°d63mm
    E/F Elbow W90°d75mm
    
    Elbow 45°
    E/F Elbow W45°d25mm
    E/F Elbow W45°d32mm
    E/F Elbow W45°d40mm
    E/F Elbow W45°d50mm
    E/F Elbow W45°d63mm
    E/F Elbow W45°d75mm
    
    Tee
    E/F Tee 20mm
    E/F Tee 25mm
    E/F Tee 32mm
    E/F Tee 40mm
    E/F Tee 50mm
    E/F Tee 63mm
    E/F Tee 75mm
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] Product tradename may include HyperFusion
[2] Sizes may be identified in metric as follows:
    1 1/4" x 1" (40 mm x 32 mm)
    1 1/2" x 1" (50 mm x 32 mm)
    1 1/2" x 1 1/4" (50 mm x 40 mm)
    2" x 1" (63 mm x 32 mm)
    2" x 1 1/4" (63 mm x 40 mm)
    2" x 1 1/2" (63 mm x 50 mm)
    40 mm x 1 1/4"
    50 mm x 1 1/2" 
    63 mm x 2" 
    40 mm (1 1/4") x 1" 
    50 mm (1 1/2") x 1 1/4" 
    50 mm (1 1/2") x 1"
    63 mm (2") x 1 1/2"
    63 mm (2") x 1 1/4"

[1] Certified for fittings without gaskets or center register.
[2] Only products bearing the NSF Mark on the product, product packaging, and/or
    documentation shipped with the product are Certified.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] Fitting packaging is coded by the following convention:
     X indicates packaging:
      0 - Bulk pack
      1 - Blister pack
      3 - Single bag
      5 - Flag tagged
[2] Fitting sizes are coded by the following convention:
     XX, YY, and ZZ indicate size:
      02 - 1/8"
      03 - 3/16"
      04 - 1/4"
      05 - 5/16"
      06 - 3/8"
      08 - 1/2"
      10 - 5/8"
      12 - 3/4"
      14 - 7/8"
      16 - 1"
      24 - 1.5"
      32 - 2"
      40 - 2.5"
      48 - 3"
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] Certified for the following model numbers and descriptions:
    
    Aquatherm Greenpipe® - NPT threaded back plate elbow 
    0620108 (1/2" - 20mm) x 1/2" FIP
    0620110 (1/2" - 20mm) x 3/4" FIP
    0620112 (3/4" - 25mm) x 3/4" FIP
    0620113 (3/4" - 25mm) x 1/2" FIP
    
    Aquatherm Greenpipe® - Wing back 90 elbow
    0620158 (1/2" - 20mm) x 1/2" FIP
    
    Aquatherm Greenpipe® Transition Piece
    0621008 (1/2" - 20mm) x 1/2" FIP
    0621010 (1/2" - 20mm) x 3/4" FIP
    0621011 (3/4" - 25mm) x 1/2" FIP
    0621012 (3/4" - 25mm) x 3/4" FIP
    0621013 (1" - 32mm) x 3/4" FIP
    0621108 (1/2" - 20mm) x 1/2" FIP
    0621110 (1/2" - 20mm) x 3/4" FIP
    0621111 (3/4" - 25mm) x 1/2" FIP
    0621112 (3/4" - 25mm) x 3/4" FIP
    0621113 (1" - 32mm) x 3/4" FIP
    0621114 (1" - 32mm) x 1" FIP
    0621115 (1 1/4" - 40mm) x 1" FIP
    0621116 (1 1/4" - 40mm) x 1 1/4" FIP
    0621117 (1 1/2" - 50mm) x 1 1/4" FIP
    0621118 (1.5" - 50mm) x 1.5" FIP
    0621119 (2" - 63mm) x 1.5" FIP
    0621120 (2" - 63mm) x 2" FIP
    0621122 (2.5" - 75mm) x 2" FIP
    0621208 (1/2" - 20mm) x 1/2" MIP
    0621210 (1/2" - 20mm) x 3/4" MIP
    0621211 (3/4" - 25mm) x 1/2" MIP
    0621212 (3/4" - 25mm) x 3/4" MIP
    0621213 (1" - 32mm) x 3/4" MIP
    0621308 (1/2" - 20mm) x 1/2" MIP
    0621310 (1/2" - 20mm) x 3/4" MIP
    0621312 (3/4" - 25mm) x 3/4" MIP
    0621314 (1" - 32mm) x 1" MIP
    0621316 (1" - 32mm) x 1.25" MIP
    0621317 (1 1/4" - 40mm) x 1" MIP
    0621318 (1.25" - 40mm) x 1.25" MIP
    0621319 (1.5" - 50mm) x 1.25" MIP
    0621320 (1.5" - 50mm) x 1.5" MIP
    0621321 (2" - 63mm) x 1.5" MIP
    0621322 (2" - 63mm) x 2" MIP
    0621323 (2.5" - 75mm) x 2" MIP
    0621324 (2.5" - 75mm) x 2.5" MIP
    0621325 (3" - 90mm) x 3" MIP
    
[2] Certified for the following model numbers and descriptions:
    
    Aquatherm Greenpipe® - Transition Elbow
    0623008 (1/2" - 20mm) x 3/4" FIP NPT
    0623010 (1/2" - 20mm) x 1/2" FIP NPT
    0623012 (3/4" - 25mm) x 3/4" FIP NPT
    0623014 (3/4" - 25mm) x 1/2" FIP NPT
    0623016 (1" - 32mm) x 3/4" FIP NPT
    0623018 (1" - 32mm) x 1" FIP NPT
    0623208 (1/2" - 20mm) x 1/2" FIP NPT male/female
    0623506 (1/2" - 20mm) x 1/2" MIP NPT
    0623508 (1/2" - 20mm) x 3/4" MIP NPT
    0623510 (3/4" - 25mm) x 3/4" MIP NPT
    0623512 (1" - 32mm) x 3/4" MIP NPT
    0623514 (1" - 32mm) x 1" MIP NPT
    
    Aquatherm Greenpipe® - Transition Tee
    0625006 (1/2" - 20mm) x (1/2" - 20mm) x 1/2" FIP
    0625008 (1/2" - 20mm) x (1/2" - 20mm) x 3/4" FIP
    0625010 (3/4" - 25mm) x (3/4" - 25mm) x 1/2" FIP
    0625012 (3/4" - 25mm) x (3/4" - 25mm) x 3/4" FIP
    0625014 (1" - 32mm) x (1" - 32mm) x 3/4" FIP
    0625016 (1" - 32mm) x (1" - 32mm) x 1" FIP
    0625022 (1.5" - 50mm) x (1.5" - 50mm) x 1" FIP
    0625506 (1/2" - 20mm) x (1/2" - 20mm) x 1/2" MIP
    Aquatherm Greenpipe® - Fusion Outlet
    0628214 (1.25"/3/4" - 40/25mm x 1/2" FIP)
    0628216 (1.5"/3/4" - 50/25mm x 1/2" FIP)
    0628218 (2"/3/4" - 63/25mm x 1/2" FIP)
    0628220 (2.5"/3/4" - 75/25mm x 1/2" FIP)
    0628222 (3"/3/4" - 90/25mm x 1/2" FIP)
    0628224 (3.5"/3/4" - 110/25mm x 1/2" FIP)
    0628226 (4"/3/4" - 125/25mm x 1/2" FIP)
    0628230 (6"/3/4" - 160/25mm x 1/2" FIP)
    0628232 (8-10"/3/4" - 200-250/25mm x 1/2" FIP)
    0628234 (1.25"/3/4" - 40/25mm x 3/4" FIP)
    0628236 (1.5"/3/4" - 50/25mm x 3/4" FIP)
    0628238 (2"/3/4" - 63/25mm x 3/4" FIP)
    0628240 (2.5"/3/4" - 75/25mm x 3/4" FIP)
    0628242 (3"/3/4" - 90/25mm/3/4" FIP)
    0628244 (3.5"/3/4" - 110/25mm/3/4" FIP)
    0628246 (4"/3/4" - 125/25mm x 3/4" FIP)
    0628250 (6"/3/4" - 160/25mm x 3/4" FIP)
    0628254 (8-10"/3/4" - 200-250/25mm x 3/4" FIP)
    0628260 (2.5"/1" - 75/32mm x 1" FIP)
    0628262 (3"/1" - 90/32mm x 1" FIP)
    0628264 (3.5"/1" - 110/32mm x 1" FIP)
    0628266 (4" x 1" - 125/32mm x 1" FIP)
    0628270 (6"/1" - 160/32mm x 1" FIP)
    0628274 (8-10"/1" - 200-250/32mm x 1" FIP)
    0628314 (1.25"/3/4" - 40/25mm x 1/2" MIP)
    0628316 (1.5"/3/4" - 50/25mm x 1/2" MIP)
    0628318 (2"/3/4" - 63/25mm x 1/2" MIP)
    0628320 (2.5"/3/4" - 75/25mm x 1/2" MIP)
    0628322 (3"/3/4" - 90/25mm x 1/2" MIP)
    0628324 (3.5"/3/4" - 110/25mm x 1/2" MIP)
    0628326 (4"/3/4" - 125/25mm x 1/2" MIP)
    0628330 (6"/3/4" - 160/25mm x 1/2" MIP)
    0628334 (1.25"/3/4" - 40/25mm x 3/4" MIP)
    0628336 (1.5"/3/4" - 50/25mm x 3/4" MIP)
    0628338 (2"/3/4" - 63/25mm x 3/4" MIP)
    0628340 (2.5"/3/4" - 75/25mm x 3/4" MIP)
    0628342 (3"/3/4" - 90/25mm x 3/4" MIP)
    0628344 (3.5"/3/4" - 110/25mm x 3/4" MIP)
    0628346 (4"/3/4" - 125/25mm x 3/4" MIP)
    0628350 (6"/3/4" - 160/25mm x 3/4" MIP)
[3] Only products bearing the NSF Mark are Certified.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[4] Only products bearing the NSF Mark are Certified.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] Certified for equivalent metric sizes in millimetres.
[2] Certified for sizes 1/2", 3/4", 1", 1 1/4", 1 1/2" and 2".
[3] Certified for sizes 1/2", 3/4", 1", 1 1/4", 1 1/2", 2", 2 1/2", 3", 4", 6" and 8"
[4] Certified for sizes 1/2", 3/4", 1", 1 1/4", 1 1/2", 2", 2 1/2" 3", 4", 6" and 8"
[5] Certified for sizes 1/2", 3/4", 1", 1 1/4", 1 1/2", 2", 2 1/2", 3", 4" and 6"
[6] Certified for sizes 1/2" x 1/2", 3/4" x 3/4", 1" x 1", 1 1/4", x 1 1/4", 1 1/2" x 1 1/2"
    and 2" x 2"
[23] Certified for sizes ¾" x½" , 1"x ½" , 1"x ¾",1 ¼"x ½", 1 ¼"x ¾",1 ¼"x 1, 1 ½"x ½", 1 ½"x
     ¾", 1 ½"x 1", 1 ½"x 1 ¼", 2"x ¾", 2"x1", 2"x 1 ¼", 2"x 1 ½", 2 ½"x 1 ½", 2 ½"x 2",
     3"x2", 3"x 2 ½", 4" x 2", 4"x3", 6"x3", and 6"x4"
     
[24] ¾" x½" , 1"x ½" , 1"x ¾",1 ¼"x ½", 1 ¼"x ¾",1 ¼"x 1, 1 ½"x ½", 1 ½"x ¾", 1 ½"x 1", 1 ½"x
     1 ¼", 2"x ¾", 2"x1", 2"x 1 ¼", 2"x 1 ½", 2 ½"x 1 ½",  2 ½"x 2", 3"x2", 3"x 2 ½", 4" x
     2", 4"x3", 6"x3" and 6"x4"
     
[25] Certified for sizes 2" through 6"

[7] Certified for sizes 16 mm x 3/8", 20 mm x 1/2", 25 mm x 3/4", 32 mm x 1", 40 mm x
    1-1/4", 50 mm x 1-1/2", 63 mm x 2".
[8] Certified for sizes 16 mm x 3/8", 20 mm x 1/2", 25 mm x 3/4", 32 mm x 1", 40 mm x
    1-1/4", 50 mm x 1-1/2", 63 mm x 2", 75 mm x 2-1/2", 90 mm x 3", 110 mm x 4", 160 mm x 6".
[9] Certified for sizes 50 mm, 63 mm, 75 mm, 90 mm, 110 mm, 160 mm.
[10] Certified for sizes 25 mm, 40 mm.
[11] Certified for sizes 16 mm, 20 mm, 25 mm, 32 mm, 40 mm, 50 mm, 63 mm, 75 mm, 90 mm, 110
     mm, 160 mm.
[12] Certified for sizes 16 mm, 20 mm, 25 mm, 32 mm, 40 mm, 50 mm, 63 mm, 75 mm, 90 mm, 110
     mm, 160 mm, 225 mm.
[13] Certified for sizes 50 mm, 63 mm, 75 mm, 90 mm, 110 mm, 160 mm, 225 mm.
[14] Certified for sizes 75 mm x 63 mm, 90 mm x 63 mm, 110 mm x 63 mm, 110 mm x 90 mm, 160 mm
     x 63 mm, 160 mm x 90 mm, 160 mm x 110mm.
[15] Certified for sizes 63 mm x 63 mm x 63 mm, 75 mm x 75 mm x 75 mm, 90 mm x 90 mm x 90 mm,
     110 mm x 110 mm x 110 mm, 160 mm x 160mm x 160 mm.
[16] Certified for sizes 20 mm x 16 mm, 25 mm x 20 mm, 32 mm x 20 mm, 32 mm x 25 mm, 40 mm x
     20 mm, 40 mm x 25 mm, 40 mm x 32 mm, 50mm x 32 mm, 50 mm x 40 mm, 63 mm x 32 mm, 63 mm x
     40 mm, 63 mm x 50 mm, 75 mm x 50 mm, 75 mm x 63 mm, 90 mm x 50 mm, 90 mm x 63mm, 90 mm x
     75 mm, 110 mm x 50 mm, 110 mm x 63 mm, 110 mm x 90 mm, 160 mm x 90 mm, 160 mm x 110 mm,
     225 mm x 160 mm.
[17] Certified for sizes 20 mm x 16 mm, 25 mm x 16 mm, 25 mm x 20 mm, 32 mm x 16 mm, 32 mm x
     20 mm, 32 mm x 25 mm, 40 mm x 20 mm, 40mm x 25 mm, 40 mm x 32 mm, 50 mm x 20 mm, 50 mm x
     25 mm, 50 mm x 32 mm, 50 mm x 40 mm, 63 mm x 25 mm, 63 mm x 32 mm, 63 mm x 40mm, 63 mm x
     50 mm, 75 mm x 32 mm, 75 mm x 40 mm, 75 mm x 50 mm, 75 mm x 63 mm, 90 mm x 63 mm, 25 mm
     x 1/2", 32 mm x 3/4", 40 mm x 1/2", 40 mm x 1", 50 mm x 1/2", 50 mm x 1-1/4", 63 mm x
     1-1/2".
[18] Certified for sizes 25 mm x 20 mm, 32 mm x 20 mm, 32 mm x 25 mm, 40 mm x 20 mm, 40 mm x
     25 mm, 40 mm x 32 mm, 50 mm x 25 mm, 50mm x 32 mm, 50 mm x 40 mm, 63 mm x 50 mm.
[19] Certified for sizes 160 mm.
[20] Certified for sizes 25 mm x 20 mm x 25 mm, 32 mm x 25 mm x 32 mm, 32 mm x 20 mm x 32 mm,
     40 mm x 32 mm x 40 mm, 40 mm x 25 mm x
     40 mm, 40 mm x 20 mm x 40 mm, 50 mm x 32 mm x 50 mm, 50 mm x 25 mm x 50 mm, 50 mm x 20
     mm x 50 mm, 63 mm x 50 mm x 63 mm, 63 mm
     x 40 mm x 63 mm, 63 mm x 32 mm x 63 mm, 63 mm x 25 mm x 63 mm.
[21] Certified for sizes 32 mm x 1/2" x 32 mm, 50 mm x 1/2" x 50 mm, 63 mm x 1/2" x 63 mm.
[22] Certified for sizes 20 mm, 25 mm, 32 mm, 40 mm, 50 mm, 63 mm.

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] 1/8" x 1/8" x 1/8" - 6" x 6" x 4"
[2] 1 1/4" x 1 1/4" x 1" - 12" x 12" x 10"
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] Certification does not include any additional fittings or gaskets.
[2] Use of this material may not be appropriate in all water chemistries. Copper tube may
    require corrosion control to limit the leaching of copper into drinking water under
    certain water chemistries. Refer to Informative Annex I-1.1 of NSF/ANSI/CAN 61 for the
    water quality considerations to be used before installing this product.
[3] The "A" prefix in the product trade names may be removed to denote domestic
    identification.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] Fittings may consist of Socket Weld, Threaded (NPT, PT and BSP(ISO7-1,ISO 228-1), Butt
    Weld or any combination of these end preps.
[2] Certified for 304L and 316L fittings only.
[3] Certified for equivalent metric sizes.
[4] Only products bearing the NSF Mark on the product, product packaging, and/or
    documentation shipped with the product are Certified.
[5] Branch Size: 1/8" - 4", Run Pipe Size: 1/4" - 36".
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

** These fitting products may also be represented by the trade names: CP&F, Charlotte,
   Charlotte Pipe, and Charlotte Pipe and Foundry.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] Listed for the following sizes and configurations:
    EF Coupler
    1/2" CTS
    1/2" IPS
    3/4" CTS
    3/4" IPS
    1" CTS
    1" IPS
    1-1/4" CTS
    1-1/4" IPS
    2" IPS
    3" IPS
    4" IPS
    4" DIPS
    6" IPS
    6" DIPS
    8" IPS
    8" DIPS
    10" IPS
    10" DIPS
    12" IPS
    12" DIPS
    14" IPS
    16" IPS
    16" DIPS
    EF 90° ELBOW
    1" CTS
    1" IPS
    2" IPS
    4" IPS
    6" IPS
    8" IPS
    10" IPS
    12" IPS
    14" IPS
    16" IPS
    EF 45° ELBOW
    2" IPS
    4" IPS
    6" IPS
    8" IPS
    10" IPS
    12" IPS
    14" IPS
    16" IPS
    EF 22.5° ELBOW
    2" IPS
    4" IPS
    6" IPS
    8" IPS
    10" IPS
    12" IPS
    14" IPS
    16" IPS
    EF TEE
    3/4" IPS
    3/4" CTS
    1" IPS
    1" CTS
    2" IPS
    4" IPS x 2" IPS
    4" IPS x 4" IPS
    6" IPS x 4" IPS
    6" IPS x 6" IPS
    8" IPS x 4" IPS
    8" IPS x 6" IPS
    8" IPS x 8" IPS
    EF ENDCAP
    1" CTS
    1" IPS
    2" IPS
    3" IPS
    4" IPS
    6" IPS
    8" IPS
    10" IPS
    12" IPS
    14" IPS
    16" IPS
    EF REDUCER
    3/4" IPS x 1/2" CTS
    1" CTS x 3/4" CTS
    1" IPS x 1/2" CTS
    1" IPS x 3/4" IPS
    2" IPS x 1-1/4" CTS
    4" x 2" IPS
    6" x 2" IPS
    6" x 4" IPS
    8" x 2" IPS
    8" x 4" IPS
    8" x 6" IPS
    12" x 4"
    12" x 6" IPS
    12" x 8" IPS
    EFXBF ADAPTER
    1" CTS x 1/2" CTS
    1" CTS x 1/2" IPS
    1" IPS x 1/2"CTS
    1" IPS x 1/2" IPS
    1/2" CTS
    1/2" IPS
    3/4" CTS
    3/4" IPS
    1" CTS
    1" IPS
    1-1/4" CTS
    1-1/4" IPS
    2" IPS
    BF 22.5° ELBOW
    12" IPS
    16" IPS
    BF 45° ELBOW
    12" IPS
    16" IPS
    BF 90° ELBOW
    12" IPS
    16" IPS
    BF ENDCAP
    12" IPS
    16" IPS
    BF TEE
    12" IPS x 4" IPS
    12" IPS x 6" IPS
    12" IPS x 8" IPS
    12"I PS x 12" IPS
    16" IPS x 4" IPS
    16" IPS x 6" IPS
    16" IPS x 8" IPS
    16" IPS x 12" IPS
    16" IPS x 16" IPS
    BF REDUCER
    16" IPS x 12" IPS
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] This product may be marked with an alternate trade name: Douglas Barkwick Inc.
[2] Only products bearing the NSF Mark on the product, product packaging, and/or
    documentation shipped with the product are Certified.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.
[372] Product also complies with NSF/ANSI 372

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] PEX rings are non-wetted components of PEX fitting systems.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] One or a combination of these suffixes can be used with each part number.
    -2      - Cup to fit
    -2-2    - Fit to fit
    BH      - Bull head
    C       - Close ruff on elbows only
    C       - Cup on all but elbows
    F       - Fit or female
    HE      - Heat exchanges
    L or LT - Long turn
    M       - Male or medium turn
    MT      - Medium turn
    NH      - No hub
    NS      - No stop
    R       - Reducer
    RS      - Roll stop
    T       - Test cap
[2] Certified for sizes:
    3/4" x 1/2"
    1" x 1/2"
    1" x 3/4"
    1 1/4" x 1/2"
    1 1/4" x 3/4"
    1 1/4" x 1"
    1 1/2" x 1/2"
    1 1/2" x 3/4"
    1 1/2" x 1"
    1 1/2" x 1 1/4"
    2" x 1/2"
    2" x 3/4"
    2" x 1"
    2" x 1 1/4"
    2" x 1 1/2"
    
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] This copper alloy is Certified by NSF to NSF/ANSI/CAN 61 for use in drinking water
    supplies of pH 6.5 and above. Drinking water supplies that are less than pH 6.5 may
    require corrosion control to limit leaching of copper into the drinking water.
[2] Certified Sizes Include:
    
        4703 CXF ADAPT
        3"
        4"
        3/4" x 3/8"
        1"x 1 1/2"
        1 1/4" x 3/4"
    
        4707 CxC 90 ELBOW
         1 1/4" x 3/4"
         1 1/2" x 3/4"
        1 1/2" x 1"
        
        4707-3 CXF 90 EL
            1/2"
            1" – 2"   
            1/2" x 3/8"     
            1/2" x 3/4"
            3/4" X 1"
            1" x 1/2"
            1" x 3/4"
    
        4707-3-5 CXF 90 DROP EAR EL 
            3/8"
            1/2"
            1"
            3/4" x 1/2"
    
        4710-3 FXFXC TEE
            3/4" x 1/2" x 1/2"
            3/4" x 1/2" x 3/4"
        
        4712 CXCXF TEE
            3/8"
            1/2"
            3/4"
            1"
            1/2" x 1/2" x 1/8" 
            1/2" x 1/2" x 1/4"
            1/2" x 1/2" x 3/4"
            3/4" x 3/4" x 1/2"
            1" x 1" x 1/2" 
            1"x 1" x 3/4"
            1 1/4" x 1 1/4" x 1/2"
            1 1/4" x 1 1/4" x 3/4"
            1 1/2" x 1 1/2" x 1/2"
            1 1/2" x 1 1/2" x 3/4"
            2" x 2" x 1/2"
            2" x 2" x 3/4"
    
        4714 CXFXC TEE
            1/2"
            3/4"
            3/4" x 1/2" x 3/4"
            1" x 1/2" x 1"
            1" x 3/4" x 1"
            1 1/2" x 3/4" x 1 1/2"
    
        4714-B CXFXC TEE
            1/2" x 1/8" x 1/2"
            1" x 1/8" x 1"
        
         4733 CXC UNION
         1/2"
         3/4"
         1" - 3"
    
         47073 CXF 90 EL
          1/2"
          3/4"
          3/4" x 1/2"
    
          470735 CXF 90 DROP EAR EL
           1/2"
           3/4"
           1/2 x 3/8"
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] Certified for the following configurations:
    1/2" (CPA00701)
    3/4" (CPA00702)
    1" (CPA00703)
    1-1/4" (CPA00704)
    1-1/2" (CPA00705)
    2" (CPA00706)
[2] Certified for the following configurations:
    1/2" (CPAC0101)
    3/4" (CPAC0102)
    1" (CPAC0103)
    1-1/4" (CPAC0104)
    1-1/2" (CPAC0105)
    2" (CPAC0106)
[3] Certified for the following configurations:
    1/2" (CPAC0201)
    3/4" (CPAC0202)
    1" (CPAC0203)
    1-1/4" (CPAC0204)
    1-1/2" (CPAC0205)
    2" (CPAC0206)
[4] Certified for the following configurations:
    1/2" (CPAS01901)
    3/4" (CPAS01902)
    1" (CPAS01903)
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] PEX rings are non-wetted components of PEX fitting systems.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] This fitting is also listed for sizes 25 mm- 110 mm
[2] Configurations include:
    Bushing Sch 40
    3” x 1 1/2”
    3” x 2”
    4”x 2”
    4” x 3”
    4” x 110 mm
    6” x 4”
    8” x 6”
    Coupling Sch 40
    1/2”
    3/4”
    1”
    1 1/2”
    2”
    3”
    4”
    6”
    8”
    Coupling Reducer Sch 40
    4” x 2”
    4” x 110 mm
    6” x 4”
    Cap Sch 40
    1/2”
    3/4”
    1”
    1 1/2”
    3”
    4”
    6”
    8”
    Elbow Sch 40 45°
    1/2”
    3/4”
    1”
    2”
    3”
    4”
    6”
    8”
    Elbow Sch 40 90°
    1/2”
    3/4”
    1”
    2”
    3”
    4”
    6”
    8”
    Elbow Sch 40 w/ Door
    4”
    Male Adapter Sch 40
    1/2”
    3/4”
    1”
    4”
    P-Trap Sch 40
    3”
    4”
    Tee Cross Sch 40
    4”
    Tee Sch 40 w/ Door
    4”
    Tee Reducer Sch 40
    3/4” x 1/2”
    1” x 1/2”
    1” x 3/4”
    6” x 4”
    Tee Sch 40
    1/2”
    3/4”
    1”
    2”
    3”
    4”
    6”
    8”
    Tee Sanitary Sch 40
    4”
    Wye Sch 40
    4”
    6”
    Wye Reducer Sch 40
    4” x 2”
    6” x 4”
    Bushing Sch 80
    2” x 2 1/2”
    3” x 1 1/2”
    3” x 2”
    3” x 2 1/2”
    4” x 2”
    4”x 2 1/2”
    4” x 3”
    6” x 4”
    8” x 6”
    Coupling Sch 80
    1/2”
    3/4”
    1”
    1 1/2”
    2”
    2 1/2”
    3”
    4”
    6”
    Cap Sch 80
    1/2”
    3/4”
    1”
    1 1/4”
    1 1/2”
    2”
    3”
    4”
    6”
    8”
    Elbow Sch 80 45°
    1/2"
    3/4”
    1”
    1 1/2”
    2”
    2 1/2”
    3”
    4”
    6”
    Elbow Sch 80 90°
    1/2”
    3/4”
    1”
    1 1/2”
    2”
    2 1/2”
    3”
    4”
    6”
    Tee Sch 80
    1/2”
    3/4”
    1”
    1 1/2”
    2”
    3”
    4”
    6”
    6” x 4”
    Male Adapter Sch 80
    1/2”
    3/4”
    1”
    1 1/2"
    2"
[4] Also certified for sizes 25 mm - 200mm
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] Certified for 304L, 316L and 2205 stainless steel.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] Only products bearing the NSF Mark on the product, product packaging, and/or
    documentation shipped with the product are Certified.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] Only products bearing the NSF Mark on the product, product packaging, and/or
    documentation shipped with the product are Certified.
[2] The EP-55 rubber ring can be used with Fiberstrong products with a minimum diameter of
    300 mm and greater. 
     Fiberstrong products with a diameter less than 300 mm may be only joined by wrap joint.
[3] Mix ratio of Wavistrong EASY-FIT Adhesive is 4:1 by weight (resin: hardener). Minimum
    cure time/temperaure is 125C for 1 hour.
    Mix ratio of Wavistrong EASY-FIT Adhesive 2203-A+B is 4:1 by weight (resin: hardener).
    Minimum cure time/temperaure is 125C for 1 hour.

[1] Certification includes Polyethylene Butt Fusion Fittings and Polyethylene Electrofusion
    Fittings.
[2] Design-Flow trade name may be followed by a suffix of #341-351, #353-#355.
[3] Certification includes the following configurations:
    Bends: 90°, 45°, 22.5°, and 11.25°
    Connectors: Cap, Coupling, Flange Adapter, Reducer
    Wyes and Tees: Standard and Reducing
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.