NSF Product and Service Listings

[1] Only products bearing the NSF Mark on the product, product packaging, and/or
    documentation shipped with the product are Certified.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] Only products bearing the NSF Mark on the product, product packaging, and/or
    documentation shipped with the product are Certified.
[2] Certified for the following configurations: PN16, SDR11, and 20 mm - 315 mm.
[3] Certified for the following configurations: PN16, SDR11, and 90 x 63 mm - 315 x 250 mm.
[4] The following sizes/models are certified:
    2"
    PN10/SDR17
    PN16/SDR11
    PN20/SDR9
    PN25/SDR7
    3"
    PN10/SDR17
    PN16/SDR11
    PN20/SDR9
    PN25/SDR7
    4"
    PN10/SDR17
    PN16/SDR11
    PN20/SDR9
    PN25/SDR7
    6"
    PN10/SDR17
    PN16/SDR11
    PN20/SDR9
    PN25/SDR7
    8"
    PN10/SDR17
    PN16/SDR11
    PN20/SDR9
    PN25/SDR7
    10"
    PN10/SDR17
    PN16/SDR11
    PN20/SDR9
    PN25/SDR7
    12"
    PN10/SDR17
    PN16/SDR11
    PN20/SDR9
    PN25/SDR7

[1] Only products bearing the NSF Mark on the product, product packaging, and/or
    documentation shipped with the product are Certified.

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] Products also Certified for 100 mm - 1600 mm.
[2] Certification is for all fittings configurations in any combination.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] Products also Certified for 100 mm - 1600 mm.
[3] All joint configurations.
[4] Ductile Iron Pipe is lined with cement and then seal-coated with asphaltic coating.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] Certified for fittings without gaskets or center register.
[2] Only products bearing the NSF Mark on the product, product packaging, and/or
    documentation shipped with the product are Certified.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] Certified for equivalent metric sizes in millimetres.
[2] Certified for sizes 1/2", 3/4", 1", 1 1/4", 1 1/2" and 2".
[3] Certified for sizes 1/2", 3/4", 1", 1 1/4", 1 1/2", 2", 2 1/2", 3", 4", 6" and 8"
[4] Certified for sizes 1/2", 3/4", 1", 1 1/4", 1 1/2", 2", 2 1/2" 3", 4", 6" and 8"
[5] Certified for sizes 1/2", 3/4", 1", 1 1/4", 1 1/2", 2", 2 1/2", 3", 4" and 6"
[6] Certified for sizes 1/2" x 1/2", 3/4" x 3/4", 1" x 1", 1 1/4", x 1 1/4", 1 1/2" x 1 1/2"
    and 2" x 2"
[23] Certified for sizes ¾" x½" , 1"x ½" , 1"x ¾",1 ¼"x ½", 1 ¼"x ¾",1 ¼"x 1, 1 ½"x ½", 1 ½"x
     ¾", 1 ½"x 1", 1 ½"x 1 ¼", 2"x ¾", 2"x1", 2"x 1 ¼", 2"x 1 ½", 2 ½"x 1 ½", 2 ½"x 2",
     3"x2", 3"x 2 ½", 4" x 2", 4"x3", 6"x3", and 6"x4"
     
[24] ¾" x½" , 1"x ½" , 1"x ¾",1 ¼"x ½", 1 ¼"x ¾",1 ¼"x 1, 1 ½"x ½", 1 ½"x ¾", 1 ½"x 1", 1 ½"x
     1 ¼", 2"x ¾", 2"x1", 2"x 1 ¼", 2"x 1 ½", 2 ½"x 1 ½",  2 ½"x 2", 3"x2", 3"x 2 ½", 4" x
     2", 4"x3", 6"x3" and 6"x4"
     
[25] Certified for sizes 2" through 6"

[7] Certified for sizes 16 mm x 3/8", 20 mm x 1/2", 25 mm x 3/4", 32 mm x 1", 40 mm x
    1-1/4", 50 mm x 1-1/2", 63 mm x 2".
[8] Certified for sizes 16 mm x 3/8", 20 mm x 1/2", 25 mm x 3/4", 32 mm x 1", 40 mm x
    1-1/4", 50 mm x 1-1/2", 63 mm x 2", 75 mm x 2-1/2", 90 mm x 3", 110 mm x 4", 160 mm x 6".
[9] Certified for sizes 50 mm, 63 mm, 75 mm, 90 mm, 110 mm, 160 mm.
[10] Certified for sizes 25 mm, 40 mm.
[11] Certified for sizes 16 mm, 20 mm, 25 mm, 32 mm, 40 mm, 50 mm, 63 mm, 75 mm, 90 mm, 110
     mm, 160 mm.
[12] Certified for sizes 16 mm, 20 mm, 25 mm, 32 mm, 40 mm, 50 mm, 63 mm, 75 mm, 90 mm, 110
     mm, 160 mm, 225 mm.
[13] Certified for sizes 50 mm, 63 mm, 75 mm, 90 mm, 110 mm, 160 mm, 225 mm.
[14] Certified for sizes 75 mm x 63 mm, 90 mm x 63 mm, 110 mm x 63 mm, 110 mm x 90 mm, 160 mm
     x 63 mm, 160 mm x 90 mm, 160 mm x 110mm.
[15] Certified for sizes 63 mm x 63 mm x 63 mm, 75 mm x 75 mm x 75 mm, 90 mm x 90 mm x 90 mm,
     110 mm x 110 mm x 110 mm, 160 mm x 160mm x 160 mm.
[16] Certified for sizes 20 mm x 16 mm, 25 mm x 20 mm, 32 mm x 20 mm, 32 mm x 25 mm, 40 mm x
     20 mm, 40 mm x 25 mm, 40 mm x 32 mm, 50mm x 32 mm, 50 mm x 40 mm, 63 mm x 32 mm, 63 mm x
     40 mm, 63 mm x 50 mm, 75 mm x 50 mm, 75 mm x 63 mm, 90 mm x 50 mm, 90 mm x 63mm, 90 mm x
     75 mm, 110 mm x 50 mm, 110 mm x 63 mm, 110 mm x 90 mm, 160 mm x 90 mm, 160 mm x 110 mm,
     225 mm x 160 mm.
[17] Certified for sizes 20 mm x 16 mm, 25 mm x 16 mm, 25 mm x 20 mm, 32 mm x 16 mm, 32 mm x
     20 mm, 32 mm x 25 mm, 40 mm x 20 mm, 40mm x 25 mm, 40 mm x 32 mm, 50 mm x 20 mm, 50 mm x
     25 mm, 50 mm x 32 mm, 50 mm x 40 mm, 63 mm x 25 mm, 63 mm x 32 mm, 63 mm x 40mm, 63 mm x
     50 mm, 75 mm x 32 mm, 75 mm x 40 mm, 75 mm x 50 mm, 75 mm x 63 mm, 90 mm x 63 mm, 25 mm
     x 1/2", 32 mm x 3/4", 40 mm x 1/2", 40 mm x 1", 50 mm x 1/2", 50 mm x 1-1/4", 63 mm x
     1-1/2".
[18] Certified for sizes 25 mm x 20 mm, 32 mm x 20 mm, 32 mm x 25 mm, 40 mm x 20 mm, 40 mm x
     25 mm, 40 mm x 32 mm, 50 mm x 25 mm, 50mm x 32 mm, 50 mm x 40 mm, 63 mm x 50 mm.
[19] Certified for sizes 160 mm.
[20] Certified for sizes 25 mm x 20 mm x 25 mm, 32 mm x 25 mm x 32 mm, 32 mm x 20 mm x 32 mm,
     40 mm x 32 mm x 40 mm, 40 mm x 25 mm x
     40 mm, 40 mm x 20 mm x 40 mm, 50 mm x 32 mm x 50 mm, 50 mm x 25 mm x 50 mm, 50 mm x 20
     mm x 50 mm, 63 mm x 50 mm x 63 mm, 63 mm
     x 40 mm x 63 mm, 63 mm x 32 mm x 63 mm, 63 mm x 25 mm x 63 mm.
[21] Certified for sizes 32 mm x 1/2" x 32 mm, 50 mm x 1/2" x 50 mm, 63 mm x 1/2" x 63 mm.
[22] Certified for sizes 20 mm, 25 mm, 32 mm, 40 mm, 50 mm, 63 mm.

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] 1/8" x 1/8" x 1/8" - 6" x 6" x 4"
[2] 1 1/4" x 1 1/4" x 1" - 12" x 12" x 10"
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] Certification does not include any additional fittings or gaskets.
[2] Use of this material may not be appropriate in all water chemistries. Copper tube may
    require corrosion control to limit the leaching of copper into drinking water under
    certain water chemistries. Refer to Informative Annex I-1.1 of NSF/ANSI/CAN 61 for the
    water quality considerations to be used before installing this product.
[3] The "A" prefix in the product trade names may be removed to denote domestic
    identification.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] Certified for the following configurations:
    Weld Neck Flange
    Blind Flange
    Slip-on Flange
    Socket Weld Flange
    Lap Joint Flange
    Threaded Flange
    Orifice Flange
    Bossed Blind
    Reducing Flange
    Stub End
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] Certified for use in 4" and greater vertical turbine pumps used in municipal and
    community wells with a minimum flow of 54,000 gallons per day.
[2] Only products bearing the NSF Mark on the product, product packaging, and/or
    documentation shipped with the product are Certified.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] This product may be marked with an alternate trade name: Douglas Barkwick Inc.
[2] Only products bearing the NSF Mark on the product, product packaging, and/or
    documentation shipped with the product are Certified.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.
[372] Product also complies with NSF/ANSI 372

[1] Certified for EPDM and SBR gaskets only.

[1] Certified for the following configurations:
    Welding Neck (WN)
    Slip-On (SO)
    Lap Joint (LJ)
    Socket Weld (SW)
    Blind (BL)
    Threaded (THD)
    Welding Neck Ring Joint (WNRTJ)
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] One or a combination of these suffixes can be used with each part number.
    -2      - Cup to fit
    -2-2    - Fit to fit
    BH      - Bull head
    C       - Close ruff on elbows only
    C       - Cup on all but elbows
    F       - Fit or female
    HE      - Heat exchanges
    L or LT - Long turn
    M       - Male or medium turn
    MT      - Medium turn
    NH      - No hub
    NS      - No stop
    R       - Reducer
    RS      - Roll stop
    T       - Test cap
[2] Certified for sizes:
    3/4" x 1/2"
    1" x 1/2"
    1" x 3/4"
    1 1/4" x 1/2"
    1 1/4" x 3/4"
    1 1/4" x 1"
    1 1/2" x 1/2"
    1 1/2" x 3/4"
    1 1/2" x 1"
    1 1/2" x 1 1/4"
    2" x 1/2"
    2" x 3/4"
    2" x 1"
    2" x 1 1/4"
    2" x 1 1/2"
    
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] This copper alloy is Certified by NSF to NSF/ANSI/CAN 61 for use in drinking water
    supplies of pH 6.5 and above. Drinking water supplies that are less than pH 6.5 may
    require corrosion control to limit leaching of copper into the drinking water.
[2] Certified Sizes Include:
    
        4703 CXF ADAPT
        3"
        4"
        3/4" x 3/8"
        1"x 1 1/2"
        1 1/4" x 3/4"
    
        4707 CxC 90 ELBOW
         1 1/4" x 3/4"
         1 1/2" x 3/4"
        1 1/2" x 1"
        
        4707-3 CXF 90 EL
            1/2"
            1" – 2"   
            1/2" x 3/8"     
            1/2" x 3/4"
            3/4" X 1"
            1" x 1/2"
            1" x 3/4"
    
        4707-3-5 CXF 90 DROP EAR EL 
            3/8"
            1/2"
            1"
            3/4" x 1/2"
    
        4710-3 FXFXC TEE
            3/4" x 1/2" x 1/2"
            3/4" x 1/2" x 3/4"
        
        4712 CXCXF TEE
            3/8"
            1/2"
            3/4"
            1"
            1/2" x 1/2" x 1/8" 
            1/2" x 1/2" x 1/4"
            1/2" x 1/2" x 3/4"
            3/4" x 3/4" x 1/2"
            1" x 1" x 1/2" 
            1"x 1" x 3/4"
            1 1/4" x 1 1/4" x 1/2"
            1 1/4" x 1 1/4" x 3/4"
            1 1/2" x 1 1/2" x 1/2"
            1 1/2" x 1 1/2" x 3/4"
            2" x 2" x 1/2"
            2" x 2" x 3/4"
    
        4714 CXFXC TEE
            1/2"
            3/4"
            3/4" x 1/2" x 3/4"
            1" x 1/2" x 1"
            1" x 3/4" x 1"
            1 1/2" x 3/4" x 1 1/2"
    
        4714-B CXFXC TEE
            1/2" x 1/8" x 1/2"
            1" x 1/8" x 1"
        
         4733 CXC UNION
         1/2"
         3/4"
         1" - 3"
    
         47073 CXF 90 EL
          1/2"
          3/4"
          3/4" x 1/2"
    
          470735 CXF 90 DROP EAR EL
           1/2"
           3/4"
           1/2 x 3/8"
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] Certified for the following configurations:
    1/2" (CPA00701)
    3/4" (CPA00702)
    1" (CPA00703)
    1-1/4" (CPA00704)
    1-1/2" (CPA00705)
    2" (CPA00706)
[2] Certified for the following configurations:
    1/2" (CPAC0101)
    3/4" (CPAC0102)
    1" (CPAC0103)
    1-1/4" (CPAC0104)
    1-1/2" (CPAC0105)
    2" (CPAC0106)
[3] Certified for the following configurations:
    1/2" (CPAC0201)
    3/4" (CPAC0202)
    1" (CPAC0203)
    1-1/4" (CPAC0204)
    1-1/2" (CPAC0205)
    2" (CPAC0206)
[4] Certified for the following configurations:
    1/2" (CPAS01901)
    3/4" (CPAS01902)
    1" (CPAS01903)
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] Certified for 304L, 316L and 2205 stainless steel.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] Only products bearing the NSF Mark on the product, product packaging, and/or
    documentation shipped with the product are Certified.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] Only products bearing the NSF Mark on the product, product packaging, and/or
    documentation shipped with the product are Certified.
[2] The EP-55 rubber ring can be used with Fiberstrong products with a minimum diameter of
    300 mm and greater. 
     Fiberstrong products with a diameter less than 300 mm may be only joined by wrap joint.
[3] Mix ratio of Wavistrong EASY-FIT Adhesive is 4:1 by weight (resin: hardener). Minimum
    cure time/temperaure is 125C for 1 hour.
    Mix ratio of Wavistrong EASY-FIT Adhesive 2203-A+B is 4:1 by weight (resin: hardener).
    Minimum cure time/temperaure is 125C for 1 hour.

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

* Model numbers:
  9878 - CPVC Body Material
  878  - PVC Body Material
  XXX  - Size code
  SS   - Stainless steel insert
  
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] Only products bearing the NSF Mark are Certified.

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

* Trade name may include the following:
  CB  - Custom Bag
  BG# - Bag (with # of fittings in bag)

[1] Only products bearing the NSF Mark on the product, product packaging, and/or 
    documentation shipped with the product are Certified.
[Pb] Product also evaluated and determined to possess weighted average lead content of
     <=0.25% and complies with lead content requirements for “lead free” plumbing as defined
     by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking
     Water Act.

[1] Certification does not include o-rings or gaskets.

[1] Certified for use as a drop pipe in residential and municipal wells. 
[2] System consists of pipe and end connection.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] Certified for custom fabricated stainless steel 304/304L pipes, fittings, pipe spools,
    or fabricated assemblies, welded by using approved procedures for GTAW, or GTAW/GMAW,
    and cleaning procedures associated with ASTM A380.
[2] Each configuration is available in the following sizes:
    SS GROOVE X FIP REDUCER 
    2 ½” x 2”
[3] Each configuration is available in the following sizes:
    SS GROOVE X FIP TEE 
    2 x 1" 
    2 x 1 ½" 
    2 ½” x 1” 
    3” x 1” 
    4” x 1” 
    6” x 1” 
    2 ½” x 2” 
    3” x 2” 
    4” x 2” 
    6” x 2” 
[4] Each configuration is available in the following sizes:
    SS GROOVED FLANGE 
    2” 
    2 ½” 
    3” 
    4” 
    6” 

[1] # indicates SDR (Standard Dimension Ratio):
    7, 9, 11, 13.5, 15.5, 17, 19, 21, 26, 32.5
    
    XX indicates size in inches
    
    XXXX indicates size such as 20x18 = 2018, etc.
    
    B indicates internal dimension.
[2] The following non-wetted flange/backup rings can be used with the HDPE Flange
    Adapter(HDPE-SDR#-XX) and Stub Ends (SE-SDR#-XX):
    Stainless steel flange/backup ring SS316-SDR#-XX
    # indicates SDR (Standard Dimension Ratio): 7, 13.5, 21, 26, and 52
    XX indicates size: 2" - 63"
    Convoluted flange/backup ring BUP-SDR#-XX
    # indicates SDR (Standard Dimension Ratio): 7, 9, 9.3, 11, 13.5, 17, 19, 21, 26 and 51
    XX indicates size: 2" - 63"
    Polypropylene encapsulated ductile iron flange/backup ring PPDI-SDR#-XX
    # indicates SDR (Standard Dimension Ratio): 7 and 13.5
    XX indicates size: 2" - 63"
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] Certification includes flange class 125, 150, 250, 300, B16.1, B16.5 (ASME Standard) and
    class B to F and C207 (AWWA Standard).
[2] Only products bearing the NSF Mark on the product, product packaging, and/or
    documentation shipped with the product are Certified.
    
[3] Certified for the following configurations and sizes:
    Blind Flange: 75-2600 mm
    Double Flanged Fitting: 75-150mm (3-6") x 100-400 mm
    
[4] GX is an abbreviation of GENEX.
[5] Certified for the following configurations and sizes:
    GX Double Socket Tee: 75-400 x 75-400 mm
    GX Double Socket Tee: 400 mm x 8-12"
    GX Socket Spigot Reducer: 100-400 x 75-300 mm
    GX Socket Spigot Reducer: 400 mm x 8-12"
    GX Spigot Socket Reducer: 100-400 x 75-300 mm
    GX Spigot Socket Reducer: 400 mm x 8-12"
    GX Socket Spigot Bend: 75-400 mm
    GX Double Socket Bend: 75-400 mm
    GX Socket Spigot Tee with Flanged Branch: 75-400 x 75-100 mm
    GX Socket Spigot Tee with Flanged Branch for Shallow Buried Use: 75-250 x 75 mm
    GX Socket Spigot Tee with Spiral Flanged Branch: 75-300 x 75-100 mm
    GX Collar: 75-400 mm
    GX Flanged Socket: 75-400 mm
    GX Flanged Spigot: 75-400 mm
    GX Doublet Socket Piece: 75-400 mm
    GX Offset: 75-300 mm
    GX Cap: 75-400 mm
    GX Flanged Spigot Pipe: 75-400 mm
    GX Socket Flanged Tee with Flanged Branch: 400 x 100 mm
    GX Flanged Spigot Tee with Flanged Branch: 400 x 100 mm
    GX Double Socket Level Invert Tee with Socket Branch : 300-400 x 100-150 mm
    GX Double Socket Level Invert Tee with Socket Branch: 400 mm x 6"
    GX All Socket Cross: 6-12"
    GX Collar: 6, 8, 12"
    GX Double Socket Bend: 6, 8, 12"
    GX Double Socket Reducer: 8-12 x 6-8"
    GX Double Socket Tee with Flanged Branch: 6-12"
    GX Flanged Socket: 6, 8, 12"
    GX Flanged Spigot: 6, 8, 12"
    GX Flanged Spigot for GX Collar Connection: 6-12"
    GX Nipple: 6-12"
    GX Triple Socket Tee: 6-12 x 6-12"
[6] Certified for the following configurations and sizes:
    NS Double Socket Tee: 500-1000×350-1000mm
    NS Double Socket Tee: 500-600 mm x 6-12"
    NS Socket Spigot Reducer: 500-1000 x 250-900 mm
    NS Socket Spigot Reducer: 500-600 mm x 12"
    NS Spigot Socket Reducer: 500-1000 x 250-900 mm
    NS Spigot Socket Reducer: 500-600 mm x 12"
    NS Socket Spigot Bend: 500-1000 mm
    NS Socket Spigot Tee with Flanged Branch: 500-1000 x 75-600 mm
    NS Collar: 500-1000 mm
    NS Plug: 500-1000 mm
    NS Flanged Socket: 500-1000 mm
    NS Flanged Spigot: 500-1000 mm
    NS Double Socket Level Invert Tee with Socket Branch: 500-1000 x 200-400 mm
    NS Double Socket Bend: 500-1000 mm
    NS Double Socket Level Invert Tee with GX Socket Branch: 500-1000 x 150-400 mm
    NS Double Socket Level Invert Tee with GX Socket Branch: 500-600 mm x 6-12"
    NS Flanged Spigot Tee with Flanged Branch: 500-1000 x 100-200 mm
    NS Socket Flanged Tee with Flanged Branch: 500-1000 x 100-200 mm
    NS Triple Socket Cross: 500-900 x 400-700 mm
[7] Certified for the following configurations and sizes:
    PN Socket Spigot Pipe: 500-1100 mm
    PN Socket Spigot Tee with Flanged Branch: 700-1500 x 100-200 mm
    PN Collar: 700-1500 mm
[8] Certified for the following configurations and sizes:
    S Collar: 1100-2600 mm
    S Flanged Socket: 1100-2600 mm
    S Flanged Spigot: 1100-2600 mm
    SX Collar: 1100-1500 mm
    SX Double Socket Bend (5 5/8°-90°): 1100-1500 mm
    SX Double Socket Level Invert Tee with GX Socket Branch: 1100-1500×400 mm
    SX Double Socket Tee :1100-1500×300-1500 mm
    SX Double Socket Tee (12''): 1100-1500 mm
    SX Flanged Socket: 1100-1500 mm
    SX Flanged Spigot: 1100-1500 mm
    SX Flanged Spigot Pipe For Collar: 1100-1500 mm
    SX Flanged Spigot Tee with Flanged Branch:1100-1500×150-300 mm
    SX Long Collar: 1100-1500 mm
    SX Socket Flanged Tee with Flanged Branch 1100-1500×150-300 mm
    SX Socket Spigot Bend (5 5/8°-90°): 1100-1500 mm
    SX Socket Spigot Reducer: 1100-1500×600-1350 mm
    SX Socket Spigot Tee with Double boss flange: 1100-1500×75 mm
    SX Socket Spigot Tee with Flanged Branch: 1100-1500×150-600 mm
    SX Socket Spigot Tee with boss flange: 1100-1500×75 mm
    SX Spigot Socket Reducer: 1100-1500×600-1350 mm
[9] Certified for the following configurations and sizes:
    SX Collar: 1100-1500 mm 	
    SX Double Socket Bend (5 5/8°-90°): 1100-1500 mm	
    SX Double Socket Level Invert Tee with GX Socket Branch: 1100-1500×400 mm 	
    SX Double Socket Tee :1100-1500×300-1500 mm 	
    SX Double Socket Tee (12''): 1100-1500 mm 	
    SX Flanged Socket: 1100-1500 mm 	
    SX Flanged Spigot: 1100-1500 mm 	
    SX Flanged Spigot Pipe For Collar: 1100-1500 mm 	
    SX Flanged Spigot Tee with Flanged Branch:1100-1500×150-300 mm 	
    SX Long Collar: 1100-1500 mm 	
    SX Socket Flanged Tee with Flanged Branch 1100-1500×150-300 mm 	
    SX Socket Spigot Bend (5 5/8°-90°): 1100-1500 mm	
    SX Socket Spigot Reducer: 1100-1500×600-1350 mm 	
    SX Socket Spigot Tee with Double boss flange: 1100-1500×75 mm 	
    SX Socket Spigot Tee with Flanged Branch: 1100-1500×150-600 mm 	
    SX Socket Spigot Tee with boss flange: 1100-1500×75 mm	
    SX Spigot Socket Reducer: 1100-1500×600-1350 mm
[10] Certified for the following configurations and sizes:
     UF Double Socket Tee: 800-2600 x 300-2600 mm
     UF Socket Spigot Reducer: 800-2600 x 300-2400 mm
     UF Spigot Socket Reducer: 800-2600 x 500-2400 mm
     UF Socket Spigot Bend: 800-2600 mm
     UF Double Socket Bend: 800-2600 mm
     UF Socket Flanged Tee with Flanged Branch: 800-2600 x 150-500 mm
     UF Flanged Spigot Tee with Flanged Branch: 800-2600 x 150-500 mm
     UF Socket Spigot Tee with Flanged Branch: 800-2600 x 75-600 mm
     UF Flanged Socket: 800-2600 mm
     UF Flanged Spigot: 800-2600 mm
     UF Double Socket Level Invert Tee with Socket Branch: 800-2600 x 300-400 mm
     UF Triple Socket Cross: 800-900 x 600-700 mm
[11] Certified for the following configurations and sizes:
     US Collar: 800-2600 mm
[16] Complies with US EPA Maximum Contaminant Levels (MCLs) for PFAS according to
     NSF/ANSI/CAN 61.

[1] Only products bearing the NSF Mark on the product, product packaging, and/or
    documentation shipped with the product are Certified.
[2] GX is an abbreviation of GENEX.
[3] Certified for the following configurations and sizes:
    GX Double Socket Tee: 75-400 x 75-400 mm
    GX Double Socket Tee: 400 mm x 8-12""
    GX Socket Spigot Reducer: 100-400 x 75-300 mm
    GX Socket Spigot Reducer: 400 mm x 8-12""
    GX Spigot Socket Reducer: 100-400 x 75-300 mm
    GX Spigot Socket Reducer: 400 mm x 8-12""
    GX Socket Spigot Bend: 75-400 mm
    GX Double Socket Bend: 75-400 mm
    GX Socket Spigot Tee with Flanged Branch: 75-400 x 75-100 mm
    GX Socket Spigot Tee with Flanged Branch for Shallow Buried Use: 75-250 x 75 mm
    GX Socket Spigot Tee with Spiral Flanged Branch: 75-300 x 75-100 mm
    GX Collar: 75-400 mm
    GX Flanged Socket: 75-400 mm
    GX Flanged Spigot: 75-400 mm
    GX Double Socket Piece: 75-400 mm
    GX Offset: 75-400 mm
    GX Cap: 75-400 mm
    GX Flanged Spigot Pipe: 75-400 mm
    GX Socket Flanged Tee with Flanged Branch: 400 x 100 mm
    GX P-Link: 75-300 mm
    GX Flanged Spigot Tee with Flanged Branch: 400 x 100 mm
    GX Double Socket Level Invert Tee with Socket Branch: 300-400 x 100-150 mm
    GX Double Socket Level Invert Tee with Socket Branch: 400 mm x 6""
    GX All Socket Cross : 6-12""
    GX Collar: 6, 8, 12""
    GX Double Socket Bend : 6, 8, 12""
    GX Double Socket Reducer : 8-12 x 6-8""
    GX Double Socket Tee with Flanged Branch: 6-12""
    GX Flanged Socket: 6, 8, 12""
    GX Flanged Spigot : 6, 8, 12""
    GX Flanged Spigot for GX Collar Connection: 6-12""
    GX Nipple: 6-12""
    GX Triple Socket Tee: 6-12 x 6-12""
    NS Double Socket Tee: 500-1000 x 350-1000 mm
    NS Double Socket Tee: 500-600 mm x 6-12""
    NS Socket Spigot Reducer: 500-1000 x 250-900 mm
    NS Socket Spigot Reducer: 500-600 mm x 12""
    NS Spigot Socket Reducer: 500-1000 x 250-900 mm
    NS Spigot Socket Reducer: 500-600 mm x 12""
    NS Socket Spigot Bend: 500-1000 mm
    NS Double Socket Bend: 500-1000 mm
    NS Socket Spigot Tee with Flanged branch: 500-1000 x 75-600 mm
    NS Collar: 500-1000 mm
    NS Plug: 500-1000 mm
    NS Flanged Socket: 500-1000 mm
    NS Flanged Spigot: 500-1000 mm
    NS Double Socket Level Invert Tee with Socket Branch: 500-1000 x 200-400 mm
    NS Double Socket Level Invert Tee with GX Socket Branch:500-1000 x 150-400 mm
    NS Double Socket Level Invert Tee with GX Socket Branch: 500-600 mm x 6-12""
    NS Flanged Spigot Tee with Flanged Branch: 500-1000 x 100-200 mm
    NS Socket Flanged Tee with Flanged Branch: 500-1000 x 100-200 mm
    NS Triple Socket Cross: 500-900 x 400-700 mm
    NS Socket Spigot Tee with Flanged branch: 500-1000mm x 6"-24"
    NS Long Collar: 900 mm
    PN Socket Spigot Pipe: 500-1100 mm
    PN Socket Spigot Tee with Flanged Branch: 700-1500 x 100-200 mm
    PN Collar: 700-1500 mm
    S Collar: 1100-2600 mm
    S Flanged Socket: 1100-2600 mm
    S Flanged Spigot: 1100-2600 mm
    SX Collar: 1100-1500 mm
    SX Double Socket Bend (5 5/8°-90°): 1100-1500 mm
    SX Double Socket Level Invert Tee with GX Socket Branch: 1100-1500×400 mm
    SX Double Socket Tee :1100-1500×300-1500 mm
    SX Double Socket Tee (12''): 1100-1500 mm
    SX Flanged Socket: 1100-1500 mm
    SX Flanged Spigot: 1100-1500 mm
    SX Flanged Spigot Pipe For Collar: 1100-1500 mm
    SX Flanged Spigot Tee with Flanged Branch:1100-1500×150-300 mm
    SX Long Collar: 1100-1500 mm
    SX Socket Flanged Tee with Flanged Branch 1100-1500×150-300 mm
    SX Socket Spigot Bend (5 5/8°-90°): 1100-1500 mm
    SX Socket Spigot Reducer: 1100-1500×600-1350 mm
    SX Socket Spigot Tee with Double boss flange: 1100-1500×75 mm
    SX Socket Spigot Tee with Flanged Branch: 1100-1500×150-600 mm
    SX Socket Spigot Tee with boss flange: 1100-1500×75 mm
    SX Spigot Socket Reducer: 1100-1500×600-1350 mm
    
    Certification includes flange class 125, 150, 250, 300, B16.1, B16.5 (ASME Standard) and
    class B to F and C207 (AWWA Standard).
[4] Certified for the following configurations and sizes:
    US Collar: 800-2600 mm
    UF Double Socket Tee: 800-2600 x 300-2600 mm
    UF Socket Spigot Reducer: 800-2600 x 300-2400 mm
    UF Spigot Socket Reducer: 800-2600 x 500-2400 mm
    UF Socket Spigot Bend: 800-2600 mm
    UF Double Socket Bend: 800-2600 mm
    UF Socket Flanged Tee with Flanged Branch: 800-2600 x 150-500 mm
    UF Flanged Spigot Tee with Flanged Branch:800-2600 x 150-500 mm
    UF Socket Spigot Tee with Flanged Branch: 800-2600 x 75-600 mm
    UF Flanged Socket: 800-2600 mm
    UF Flanged Spigot: 800-2600 mm
    UF Double Socket Level Invert Tee with Socket Branch: 800-2600 x 300-400 mm
    UF Triple Socket Cross: 800-900 x 600-700 mm
    
    Certification includes flange class 125, 150, 250, 300, B16.1, B16.5 (ASME Standard) and
    class B to F and C207 (AWWA Standard).
[8] Certified for the following configurations and sizes:
          Blind Flange: 75-2600 mm
          Double Flanged Fitting: 75-150mm (3-6"") x 100-400 mm
    
    Certification includes flange class 125, 150, 250, 300, B16.1, B16.5 (ASME Standard) and
    class B to F and C207 (AWWA Standard).
[9] Complies with US EPA Maximum Contaminant Levels (MCLs) for PFAS according to
    NSF/ANSI/CAN 61.

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] Certified for cement lined pipe (4" - 48") and/or asphaltic coated pipe (3" - 48").
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] AA refers to the size of the equal fittings, where AA may be 02 (1/8"), 04 (1/4"), 06
    (3/8"), 08 (1/2"), 12 (3/4"), 16 (1"), 20 (1 1/4"), 24 (1 1/2"), 32 (2"), 40 (2 1/2"),
    48 (3"), 64 (4"), 80 (5"), or 96 (6"). BB and CC refer to the ends of bushing and
    reducing couplings, where BB and CC may be 02 (1/8"), 04 (1/4"), 06 (3/8"), 08 (1/2"),
    12 (3/4"), 16 (1"), 20 (1 1/4"), 24 (1 1/2"), 32 (2"), 40 (2 1/2"), 48 (3"), or 64 (4").
    DD, EE, and FF refer to the end of the reducing tees, where DD, EE, and FF may be 06
    (3/8"), 08 (1/2"), 12 (3/4"), 16 (1"), 20 (1 1/4"), 24 (1 1/2") or 32 (2").
[2] Use of this material may not be appropriate in all water chemistries. Copper (tube,
    pipe, or fitting) may require corrosion control to limit the leaching of copper into
    drinking water under certain water chemistries. Refer to informative Annex I-6.1 of
    NSF/ANSI/CAN 61 for water quality considerations to be used before installing this
    product.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] Certified for the following configurations:
    Welding Neck Flange
    Blind Flange
    Bossed Flange
    Lap Joint
    Socket Welding Flange
    Slip on Flange
    Threaded Flange
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.