NSF Product and Service Listings

[1] Only products bearing the NSF Mark on the product, product packaging, and/or
    documentation shipped with the product are Certified.
[2] Certified for mechanical seals for use with pump shafts ranging from 1" - 12" in
    diameter.  Certified for equivalent metric sizes.
[3] Certified for use as a packing material in pumps with shaft diameters >= 0.625".
[4] Certified for mechanical seals for use with pump shafts ranging from 16-110 mm in
    diameter.
[5] Certified for mechanical seals for use with pump shafts ranging from 1"-8" in diameter.
    Certified
    for equivalent metric sizes.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] The filtration level (micron) and color which are used in each SK filter and may be any
    of the following:
    10  - Light Blue
    20  – Grey
    40  - Purple
    55  – Green
    70  – Brown
    100 – Black
    130 – Red
    200 – Yellow
    400 – Blue
[2] The spring type may be any of the following alphabetic codes:
    HALAR    – HALAR Coating
    HSL      - Hastelloy
    LC       - Low Cost Energy
    LC-HALAR – Low-Cost Energy – HALAR Coating
    LCHSL    - Hastelloy-Low Cost Energy
    Regular (not indicated on product name)
[3] Inlet / outlet type may be any of the following:
    ARF - Flange
    Int - Integral
    Thr - Threaded
    Vic - Victaulic
[4] Certified for a minimum flow of 72,000 L/day.
[6] Certified for a minimum flow of 1,150,200 L/day.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] Product is certified for a minimum daily flow of 2,400,000 liters.
[2] These products have filtration levels of 10-800 microns.
[3] Certified for a minimum daily flow of 300,000 liters.
[4] Certified products are evaluated as POE systems.
[5] These products have filtration levels of 10-500 microns.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.
[11] Models EBS 10000 DW and EBS 15000 DW are certified for configurations O/L and I/L.

[1] BSG 20 and BSG 20T are certified for a minimum flow of 72,000 gal./day.
[2] BSG 25 and BSG 25T are certified for a minimum flow of 122,400 gal./day.
[3] BSG 30 and BSG 30T are certified for a minimum flow of 182,880 gal./day.
[4] BSG 40 and BSG 40T are certified for a minimum flow of 338,400 gal.day.
[5] BSG 50 and BSG 50T are certified for a minimum flow of 537,120 gal./day.
[6] BSG 60 and BSG 60T are certified for a minimum flow of 802,080 gal.day.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] XXX is used as a reference to the treatment capacity in liters per second.
[2] Certified for a minimum daily permeate generation of 10,500 L.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] Coupling Set requested for use with 1/2-3/4" Water meters only.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[2] Certified for a stainless steel diaphragm and bottom housing only. Any components can be
    used above the diaphragm seal as they do not have water contact.
[3] Certified for SS316L end plate and EPDM liner. Any components can be used above the
    isolation ring as they do not have water contact.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] Certified for use in tanks 10 gallons and greater.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] Certified for a minimum flow of 15 gpm.

[1] Product also complies with NSF/ANSI 372.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] The size is the diameter of the well casing.  Certified for a minimum flow of 21,700
    gallons per day.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] All sizes. Certification is based on an intended end use in a water treatment
    facilities.  Parts can be made using reinforced Polyester or Vinylester resin.
[2] Certified for:
    10' ReadyLadder + Walk Through Kit for 8,000 gallon tanks and greater.
    15' ReadyLadder + Walk Through Kit for 10,000 gallon tanks and greater.
    Parts can be made using reinforced Polyester or Vinylester resin.

[1] Certified for a minimum flow of 16,353 L/day.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[9] Certified for use with the following chemicals with TFE/P o-ring:
    
    Acetic Acid (80%)
    Aluminum Chloride (50%)
    Aluminum chlorohydrate (40%)
    Aluminum Chlorohydrate/Polyaluminum Chloride (40%)
    Aluminum Sodium Sulfate (15%)
    Aluminum Sulfate (50%)
    Ammonia, aqueous (35%)
    Ammonium Hydroxide (29%)
    Ammonium Sulfate (45%)
    Calcium carbonate (65%)
    Calcium Chloride (15%)
    Calcium Hydroxide (50%)
    Calcium Hypochlorite (15%)
    Calcium Thiosulfate - (30%)
    Chlorine dioxide (2%)
    Citric Acid (100%) (100%)
    Copper Sulfate (5%)
    Copper Sulfate (25%)
    Deionized Water (100%)
    Dipotassium Orthophosphate (50%)
    Disodium Orthophosphate (50%)
    Ferric Chloride (50%)
    Ferric Sulfate (60%)
    Ferrous Chloride (40%)
    Ferrous Sulfate (30%)
    Fluorosilicic acid (25%)
    Hydrochloric acid (38%)
    Hydrogen Peroxide (30%)
    Magnesium Sulfate (25%)
    Peracetic Acid (10%)
    Phosphoric acid (75%)
    Poly (Diallyldimethylammonium Chloride)(pDADMAC) (50%)
    Poly Aluminum Chloride (100%)
    Polyacrylamide (3%)
    Polyaluminum Chloride (45%)
    Polyaluminum Chlorosulfate (50%)
    Polyaluminum Hydroxychlorosulfate (75%)
    Polyaluminum Silicate Sulfate (66%)
    Polyaluminum Sulfate (50%)
    Polyphosphoric Acid (100%)
    Potassium Carbonate (47%)
    Potassium Chloride (34%)
    Potassium hydroxide (45%)
    Potassium Hydroxide (50%)
    Potassium Permanganate (20%)
    Potassium Tripolyphosphate (100%)
    Sodium Acid Pyrophosphate (12%)
    Sodium Aluminate (50%)
    Sodium Ascorbate (60%)
    Sodium Bicarbonate (100%)
    Sodium Bisulfate (50%)
    Sodium Bisulfite (40%)
    Sodium Carbonate (20%)
    Sodium Carbonate (85%)
    Sodium Chlorate - 100%
    Sodium Chloride (26%)
    Sodium Chlorite (7.5%)
    Sodium Dichloroisocyanurate (25%)
    Sodium Fluoride (4.0%)
    Sodium Hydroxide (50%)
    Sodium Hypochlorite (15%)
    Sodium Metabisulfite (50%)
    Sodium Percarbonate - (15%)
    Sodium Permanganate (40%)
    Sodium Polyphosphates (35%)
    Sodium Silicate (100%)
    Sodium Sulfite (20%)
    Sodium Trimetaphosphate (20%)
    Sodium Tripolyphosphate (15%)
    Sulfur Dioxide (5%)
    Sulfuric acid (99%)
    Tetrapotassium Pyrophosphate (60%)
    Tetrasodium Pyrophosphate (7%)
    Tricalcium Phosphate (70%, slurry)
    Trichloroisocyanuric Acid (10%)
    Ultra Pure Water
    Zinc Chloride (62%)
    Zinc Orthophosphate (100%)
    Zinc Sulfate (36%)
    * Certified for contact with DI water for the purpose of diluting drinking water
    treatment chemicals.
    
    Certified for use with the following chemicals with EPDM o-ring:
    
    Acetic Acid (80%)
    Aluminum Chloride (50%)
    Aluminum Sodium Sulfate (15%)
    Aluminum Sulfate (50%)
    Ammonium Hydroxide (29%)
    Ammonium Sulfate (45%)
    Calcium carbonate (65%)
    Calcium Chloride (15%)
    Calcium Hydroxide (50%)
    Calcium Hypochlorite (15%)
    Calcium Thiosulfate - (30%)
    Citric Acid (100%) (100%)
    Copper Sulfate (5%)
    Copper Sulfate (25%)
    Ferric Chloride (50%)
    Ferric Sulfate (60%)
    Ferrous Sulfate (30%)
    Fluorosilicic acid (25%)
    Hydrochloric acid (38%)
    Hydrogen Peroxide (30%)
    Magnesium Sulfate (25%)
    Peracetic Acid (10%)
    Phosphoric acid (75%)
    Potassium Carbonate (47%)
    Potassium Chloride (34%)
    Potassium hydroxide (45%)
    Potassium Hydroxide (50%)
    Potassium Permanganate (20%)
    Sodium Aluminate (50%)
    Sodium Bicarbonate (100%)
    Sodium Bisulfate (50%)
    Sodium Bisulfite (40%)
    Sodium Carbonate (20%)
    Sodium Carbonate (85%)
    Sodium Chlorate - 100%
    Sodium Chloride (26%)
    Sodium Chlorite (7.5%)
    Sodium Fluoride (4.0%)
    Sodium Hydroxide (50%)
    Sodium Hypochlorite (15%)
    Sodium Percarbonate - (15%)
    Sodium Silicate (100%)
    Sulfur Dioxide (5%)
    Zinc Chloride (62%)
    Zinc Sulfate (36%)
    

[1] Certified for use in tanks 120,000 L and greater in water treatment plants with a
    minimum daily flow of 1,800,000 L.
[2] Certified for use in tanks with a minimum volume of 21,747 liters and minimum daily flow
    of 530,000 liters.

[1] Certified for a minimum daily flow of 0.15 gal/min/sq. ft.

[1] Certified for a flow of 0.5 gallons per minute per square foot and greater.
[2] Certified for a maximum size of 41" x 36" x 16' (height x width x length).

[1] Certification does not include any end connection, gasket, or o-ring options. Product
    has not been evaluated for point-of-end (POE) or point-or-use (POU) end uses.
[2] Certified for a minimum daily flow of 1,870 L per 3" of cartridge length.
[3] X - Retention Rating: 0.5 µm - 200 µm
[4] XX - Cartridge Length: 3" - 100"
[5] Inner Diameter: 28 mm
[6] Outer Diameter: 60 mm - 115 mm
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] Only products bearing the NSF Mark on the product, product packaging, and/or
    documentation shipped with the product are Certified.
[2] Certified for use in municipal water treatment plants only.
[3] Certified for a minimum daily flow of 200 liters per day.
[4] Certified for a minimum daily flow of 500 liters per day.
[5] Certified for a minimum daily flow of 7,000 liters per day.
[6] Certified for a minimum daily flow of 30,000 liters per day.

[1] Model 6 DWC, AquaKnight GC 6 and AquaKnight GC 6S are certified for a minimum daily flow
    of 40,320 gallons per day (28 gallons per minute)										
    Model 8 DWC, AquaKnight GC 8 and AquaKnight GC 8S are certified for a minimum daily flow
    of 72,000 gallons per day (50 gallons per minute)										
    Model 10 DWC, AquaKnight GC 10 and AquaKnight GC 10S are certified for a minimum daily
    flow of 112,320 gallons per day (78 gallons per minute)										
    Model 12 DWC, Model 12-30, Model 12-40, AquaKnight GC 12, AquaKnight GC 12-30,
    AquaKnight GC 12-40, AquaKnight GC 12S, AquaKnight GC 12-30S and AquaKnight GC 12-40S
    are certified for a minimum daily flow of 162,720 gallons per day (113 gallons per
    minute)										
    Model 14 DWC, AquaKnight GC 14 and AquaKnight GC 14S are certified for a minimum daily
    flow of 220,320 gallons per day (153 gallons per minute)
[2] Each system may come in a single tank, dual tank or multiple tank configuration.
[3] These models are certified without carbon therefore no flushing is required.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] Model 6 DWC, AquaKnight GC 6 and AquaKnight GC 6S are certified for a minimum daily flow
    of 40,320 gallons per day (28 gallons per minute)										
    Model 8 DWC, AquaKnight GC 8 and AquaKnight GC 8S are certified for a minimum daily flow
    of 72,000 gallons per day (50 gallons per minute)										
    Model 10 DWC, AquaKnight GC 10 and AquaKnight GC 10S are certified for a minimum daily
    flow of 112,320 gallons per day (78 gallons per minute)										
    Model 12 DWC, Model 12-30, Model 12-40, AquaKnight GC 12, AquaKnight GC 12-30,
    AquaKnight GC 12-40, AquaKnight GC 12S, AquaKnight GC 12-30S and AquaKnight GC 12-40S
    are certified for a minimum daily flow of 162,720 gallons per day (113 gallons per
    minute)										
    Model 14 DWC, AquaKnight GC 14 and AquaKnight GC 14S are certified for a minimum daily
    flow of 220,320 gallons per day (153 gallons per minute)
[2] Each system may come in a single tank, dual tank or multiple tank configuration.
[3] These models are certified without carbon therefore no flushing is required.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] Certified for use in mechanical devices at a maximum surface area to volume ratio of 250
    sq.in./L.

[1] The SiC BLOX FX series stack is certified for a minimum daily permeate flow of 10,000
    liters per day per module, up to ten (10) modules.
[2] The SiC BLOX FX series stack requires a 10.5 gallons per minute (gpm) flush per module
    up to ten (10) for for five minutes with de-ionized water before use.
[3] The SiC BLOX FX series is certified for municipal treatment facilities end use.

[1] The SiC BLOX FX series stack is certified for a minimum daily permeate flow of 10,000
    liters per day per module, up to ten (10) modules.
[2] The SiC BLOX FX series stack requires a 10.5 gallons per minute (gpm) flush per module
    up to ten (10) for for five minutes with de-ionized water before use.
[3] The SiC BLOX FX series is certified for municipal treatment facilities end use.

[1] Following models are certified for a minimum flow of 14,000 liters per day and requires
    a 10 liters per minute flush for ten (10) minutes with tap water before use:   
    
    CFT-0000-SMSEC6-2019 
    CFT-0000-BMSEC6-2019
    CFT-0000-SMSEC4-2022
    CFT-0000-BMSEC4-2022
    CFT-0000-SMSEC6-1016
    CFT-0000-BMSEC6-1016
    CFT-0000-SMSEC6-1019
    CFT-0000-BMSEC6-1019
    CFT-0000-HS0006-0000 
    CFT 0000-BS0006-0000
    
    CFT-0000-SC0EC6-1016, CFT-0000-SC0EC6-1019, CFT-0000-SC0EC6-2019, CFT-0000-SC0EC4-2022
    are certified for a minimum flow of 348 liters per day.
    
    The Ceramic Plate CFT-0000-SC0EC6-1016, CFT-0000-SC0EC6-1019, CFT-0000-SC0EC6-2019,
    CFT-0000-SC0EC4-2022 require a 0.5 liters per minute flush for ten (10) minutes with tap
    water before use.
    
    CFT-0000-HS0006-0000 and CFT 0000-BS0006-0000 are to be used with CFT-0000-SMSEC6-2019,
    CFT-0000-BMSEC6-2019, CFT-0000-SMSEC4-2022, CFT-0000-BMSEC4-2022, CFT-0000-SMSEC6-1016,
    CFT-0000-BMSEC6-1016, CFT-0000-SMSEC6-1019, and CFT-0000-BMSEC6-1019. 
    
    CFT-0000-SC0EC6-1016 are to be used with CFT-0000-SMSEC6-1016, CFT-0000-BMSEC6-1016
    only.
    CFT-0000-SC0EC6-1019 are to be used with CFT-0000-SMSEC6-1019, CFT-0000-BMSEC6-1019
    only.
    CFT-0000-SC0EC6-2019 are to be used with CFT-0000-SMSEC6-2019, CFT-0000-BMSEC6-2019
    only.
    CFT-0000-SC0EC4-2022 are to be used with CFT-0000-SMSEC4-2022, CFT-0000-BMSEC4-2022
    only.
    
    Certified for use with a 384 L tank or greater.

[1] Certified for use with tanks 9 x 48 and greater.
[2] V1AABCD-EFFGG, VTT1AABCD-EFFGG, and V125AABCD-EFFGG where:
    AA - May be blank or any two digit letter code.
    B  - May be D (downflow), U (upflow), or B (backwash only).
    C  - May be M (meter) or T (timer).
    D  - May be A, A2, A3, B, C, D, E, F, G, H, I, J, K, or Z to indicate the injector
    installed.
    E  - May be blank or any letter code.  If E or M then it includes a mixing valve.
    FF - May be any number from 01 to 99.  Indicates packaging or base variations.
    GG - May be any two digit combination of letters.  If blank, cover is black or if filled
    in indicates colored covers or special labels on the cover.
[3] Certified for use with tanks 12 x 52 and greater.
[4] Certified for use with tanks 10 x 54 and greater.
[5] V15AABCD-EFFGG, VP15AABCD-EFFGG and VB15AABCD-EFFGG where:
    AA - May be blank or any two digit letter code.
    B  - May be D (downflow), U (upflow), or B (backwash only).
    C  - May be M (meter) or T (timer).
    D  - May be B, C, D, E, F, G, H, I, or Z to indicate the injector installed.
    E  - May be blank or any letter code.  If E or M then it includes a mixing valve.
    FF - May be any number from 01 to 99.  Indicates packaging or base variations.
    GG - May be any two digit combination of letters.  If blank, cover is black or if filled
    in indicates colored covers or special labels on the cover.
[6] Certified for use with tanks 14 x 65 and greater.
[7] D1400-XX where XX may be blank, 01, 02, 03, or 04
[8] Water contact size restriction: 	
    D1400 - 0.35L	
    D1400-01 - 0.4L	
    D1400-02 - 0.4L	
    D1400-03 - 0.41L	
    D1400-04 - 0.4L	
    
[9] V2AABCD-EFFGG and VP2AABCD-EFFGG where:
    AA - May be blank or any two digit letter code.
    B  - May be D (downflow), U (upflow), or B (backwash only).
    C  - May be M (meter) or T (timer).
    D  - May be A, A2, A3, B, C, D, E, F, G, R, S, T, U, or Z to indicate the injector
    installed.
    E  - May be blank or any letter code.  If E or M then it includes a mixing valve.
    FF - May be any number from 01 to 99.  Indicates packaging or base variations.GG - May
    be any two digit combination of letters.  If blank, cover is black or if filled in
    indicates colored covers or special labels on the cover.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.
[10] V2HABC-DD and V2HFABC-DD where:
     A  - May be D (downflow) or B (backwash only).
     B  - May be M (meter) or T (timer).
     C  - May be A, A2, A3, B, C, D, E, F, G, H or Z.  Indicates the injector installed.
     DD - May be any number from 01 to 99.  Indicates packaging or NPT or BSPT variations.
[11] Certified for use with tanks 18 x 65 and greater.
[12] V3ABC-DD where:
     A  - May be D (downflow) or B (backwash only).
     B  - May be M (meter) or T (timer).
     C  - May be A, A2, A3, B, C, D, E, F, G, or H.  Indicates the injector installed.
     DD - May be any number from 01 to 99.  Indicates packaging or NPT or BSPT variations.
[13] V3006-XX where XX may be 01, 02 or 04.  Indicates handle color, handle direction or
     packaging.
[14] Certified for use with tanks 13 x 54 and greater.

[1] Fan Coil Model: A-CID-X:
    X  - Air flow and Capacity (X can be -3, 4, 6, 8, 10 or 12 )
    3  - 350 CFM and 0.75 Ton capacity
    4  - 450 CFM and 1 ton capacity
    6  - 650 CFM and 1.5 ton capacity
    8  - 850 CFM and 2 ton capacity
    10 - 1000 CFM and 2.5 ton capacity
    12 - 1200 CFM and 3 ton capacity

[1] Products are certified for a minimum daily flow of 2880 liters per day for use in public
    water treatment facilities.

[1] Only products bearing the NSF Mark are Certified.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] P Series Float: 
    XX, XXX, XXXX, XXXXX, XXXXXX - Size of the floats in inches
[2] P Series Rod: 
    XX - Length of rod in inches
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] All sizes.  Certification is based on an intended end use in water treatment facilities.

[1] Certified for use in 4" and greater vertical turbine pumps used in municipal and
    community wells with a minimum flow of 54,000 gallons per day.
[2] Only products bearing the NSF Mark on the product, product packaging, and/or
    documentation shipped with the product are Certified.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] Certified for use in 4" and greater vertical turbine pumps used in municipal and
    community wells with a minimum flow of 54,000 gallons per day.
[2] Only products bearing the NSF Mark on the product, product packaging, and/or
    documentation shipped with the product are Certified.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] Certified for use in 4" and greater vertical turbine pumps used in municipal and
    community wells with a minimum flow of 54,000 gallons per day.
[2] Only products bearing the NSF Mark on the product, product packaging, and/or
    documentation shipped with the product are Certified.
[3] The Listed size is the minimum connection size of the pump in which the product will be
    used.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] Certification includes the membrane material only.
[2] Certified for a minimum daily flow of 6,700 L/day.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] Certified for a minimum daily flow of 4,800,000 liters.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] Follow manufacturers use instructions for backwashing after periods in ''standby'' mode.
    Certification includes modules only.
[2] 4 S10T (Part# 119035) is a 4-pack of four #119005 modules in one box.
[3] Certified for a minimum daily permeate generation of 8,182 L for use in public water
    treatment facilities.
[4] Product is pre-flushed at 5 gallons per minute for 2 hours with chlorine CIP wash
[5] Certified for a minimum daily flow of 40,200 L.
[6] Certified for a minimum daily flow of 668,160 liters.
[7] Product to be flushed at 160 gpm for 2 hours using Chlorine CIP to sanitize system and
    piping prior to use.
[8] Certified for a minimum daily flow of 1,357,200 liters.
[9] Product to be flushed at 325 gpm for 2 hours using Chlorine CIP to sanitize system and
    piping prior to use.
[10] B40N Module Part # 118182, 118247, 118317, 118329 is certified for a minimum daily
     permeate generation of 9,600 L.
     
     B50N-L Module Part # 118324 is certified for a minimum daily permeate generation of
     12,000 L.
     
     B50N Module Part # 118322 is certified for a minimum daily permeate generation of 12,000
     L.
     
     MBR MemRACK is certified for a minimum daily permeate generation of 9,600 L.
[11] B40N Module Part # 118182, 118247, 118317, 118329 requires a pre-service flush at 14
     liters per minute for 20 minutes using tap or influent* water.
     
     B50N-L Module Part # 118324 and B50N Module Part # 118322 require a pre-service flush at
     17 liters per minute for 20 minutes using tap or influent* water.
     
     *If using influent water for the initial flush, follow the flush by disinfecting with a
     1,000 ppm chlorine (NaOCl) solution for 2 hours followed by a 20 minute flush to waste.
[12] Certified for a minimum daily flow of 80,400 liters per day
[13] Product to be flushed at 10.3 gallon per minute for 2 hours using Chlorine CIP to
     sanitize system and piping prior to use.
[14] Product to be flushed at 20 gallon per minute for 2 hours using Chlorine CIP to sanitize
     system and piping prior to use.
[15] Product is pre-flushed for 2 hours with chlorine CIP wash to sanitize system.
[16] Certified for a minimum of 6,000 liters per day.
[17] Product to be flushed at 1.5 gallons per minute for 2 hours.

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] Certified for a minimum daily flow of 28,800 gallons.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] All products are Certified for use with water treatment plant intake systems with a
    minimum daily flow of 10,000 gallons.
[2] Screens may be constructed of 90/10 Copper Nickel, Stainless Steel 304, Stainless Steel
    316, and Jacquelyn™ Coated Stainless Steel 304 or 316 material.
[3] Intake screens are Certified for all sizes.
[4] Intake Pipes and Fittings are Certified for a maximum length of 26 feet in water
    treatment plant intake systems.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] Certification requested for 1 end cap per liter.
[2] Certification will not include heating cables or silicone glue.

[1] Certified for point-of-entry (POE) and municipal end uses.
[2] EGBFE4-[basket size]-[port size]-[port
    style]-[outlet]-[material]-[P-rating]-[finish]-[MC]
    [basket size] - 12 (Size #4)
    [port size]   - 1N (1"FNPT)
    [outlet]      - 3 (bottom & opposite side outlet)[material] - 4 (304SS), 6 (316SS)
    [P-rating]    - 30 (300psi)
    [finish]      - GB (glass bead)
    [MC]          - NSF-61 certified
[3] EGBFV8-[basket size]-[port size]-[port
    style]-[outlet]-[material]-[P-rating]-[finish]-[ASME status]-[MC]
    [basket size] - 15 (Size #1), 30 (Size #2), 230 (twin Size #2)
    [port size]   - 1 through 8 (1" through 8")
    [port style]  - N (NPT), F (flange), T (sanitary ferrule)
    [outlet]      - 1 (bottom outlet), 2 (opposite side outlet), 3 (bottom & opposite side 
                    outlet), 5 (same side outlet)
    [material]    - 4 (304SS), 6 (316SS)
    [P-rating]    - 15 (150psi)
    [finish]      - GB (glass bead), EP (electropolished)
    [ASME status] - U (ASME Code), blank (non-code)
    [MC]          - NSF-61 certified
[4] EGFHD1-[length]-[port size]-[adapter type]-[material]-[P-rating]-[MC]
    [length]       - 5, 10, 20, 30 (5", 10", 20", 30")
    [port size]    - 75N (3/4"NPT), 1N (1"NPT), 75B (3/4"BSPP), 1B (1" BSPP)
    [adapter type] - D (DOE), 2 (222), 6 (226)
    [material]     - 4 (304), 6 (316)
    [P-rating]     - 30 (300psi)
    [MC]           - NSF-61 certified
[5] EGMBE-[basket quantity]-[basket size]-[port size &
    style]-[material]-[P-rating]-[finish]-[MC]
    [basket quantity]   - 4, 6, 8, or 12
    [basket size]       - 30 (Size #2)
    [port size & style] - 4, 6, 8, or 10 (4", 6", 8", or 10" flange)
    [material]          - 4 (304SS), 6 (316SS)
    [P-rating]          - 15 (150psi)
    [finish]            - GB (glass bead)
    [MC]                - NSF-61 certified
[6] EGMBV-[basket quantity]-[basket size]-[port size &
    style]-[material]-[P-rating]-[finish]-[ASME status]-[MC]
    [basket quantity]   - 4, 6, 8, or 12
    [basket size]       - 30 (Size #2)
    [port size & style] - 4, 6, 8, or 10 (4", 6", 8", or 10" flange)
    [material]          - 4 (304SS), 6 (316SS)
    [P-rating]          - 15 (150psi)
    [finish]            - GB (glass bead)
    [ASME status]       - U (ASME Code), blank (non-code)
    [MC]                - NSF-61 certified
[7] EGTCH-[qty of cartridges]-[length]-[port
    size]-[outlet]-[material]-[P-rating]-[finish]-[ASME status]-[MC]
    [quantity of cartridges] - 3, 5, 7, 12, 21
    [length]                 - 1 (10"), 2 (20"), 3 (30"), 4 (40"
    [port size]              - 1 through 8 (1" through 8")
    [port style]             - N (NPT), F (flange), T (sanitary ferrule)
    [outlet]                 - 1 (bottom outlet), 2 (opposite outlet)
    [material]               - 4 (304SS), 6 (316SS)
    [P-rating]               - 15 (150psi)
    [finish]                 - GB (glass bead), EP (electropolished)
    [ASME status]            - U (ASME Code), blank (non-code)
    [MC]                     - NSF-61 certified
[8] EGTCHB-[qty of cartridges]-[length]-[port size]-[outlet
    location]-[material]-[P-rating]-[finish]-[MC]
    [quantity of cartridges] - 3, 4, 5, 7, 12, 22
    [length]                 - 1 (10"), 2 (20"), 3 (30"), 4 (40")
    [port size]              - 1 through 8 (1" through 8")
    [port style]             - M (NPT), F (flange), T (sanitary ferrule)
    [outlet location]        - 1 (bottom outlet), 2 (opposite outlet)
    [material]               - 4 (304SS), 6 (316SS)
    [P-rating]               - 15 (150psi)
    [finish]                 - PC (polycoat)
    [MC]                     - NSF-61 certified
[9] Certified for the following part numbers: 
    
    EMuniclear-EMB
    EGWTB[BB][Micron]A[Length][End Cap Code][O-ring][Bond][Core][Suffix]
    EGCTB[Micron]A[Length][End Cap Code][O-ring][Bond][Core]
    EGATB[Micron]A[Length][End Cap Code][O-ring][Bond][Core]
    [BB]   - Blank (2.5" OD), BB (4" OD)
    [Bond] - Blank (adhesive bond), TB (thermally bonded)
    [Core] - Blank (no core), PC (polypropylene core)
    [Suffix] - Blank (standard), MC (MC trade name)
    
    Emuniclear-ESW
    EGP[Micron]A[Length]P[End Caps][O-ring]-MC
     
    [Micron]  - 1, 3, 5, 10, 25, 50 
    [Length]  - 9.75" - 60" 
    [End Cap] - Blank (None; DOE, No gaskets), 3 (222 w/fin), 4 (222 w/flat cap), 5 (222
                w/spring), 6 (226 w/flat cap), 7 (226 w/fin), 8 (226 w/spring), 9 (SOE
                w/spring), 10 (DOE w/PP Core extender), 13 (SOE w/ PP Core Ext/Spring) 
    [O-ring]  - B (Buna N), E (EPDM), S (Silicone), Blank (None)
[10] Certified for a minimum daily flow of 4,320 gallons per 10" equivalent.
[11] Certified for the following part numbers:
     
     [Series][Micron][Efficiency][Length]C[End Cap Code][O-ring]
     [Series] - EPP (2.7"OD); EPPE (2.5"OD); EPG (2.7"OD with reduced area) 
     [Micron] - 0.1 to 40
     [Efficiency] - A (absolute), N (nominal)
     [Length]  - 9.75" to 40"
     [Options] - I (stainless steel inserts), SS (stainless steel core), R (18 mega-ohm 
                 rinse), CS (stainless steel spring)
     [End Cap] - 2 (DOE with gaskets), 3 (222 w/fin), 4 (222 w/flat cap), 5 (222 w/spring), 6
     
                 (226 w/flat cap), 7 (226 w/fin), 8 (226 w/spring), 16 (213 with flat cap), 
                 28 (222 with tabs)
     [O-ring] - B (Buna N), E (EPDM), S (silicone)
[12] Certified for a minimum daily flow of 600 gallons per day.  Certified for use in
     municipal water treatment facilities only.

[1] This product does not require a Q statistic. It is made from material or materials that
    do not require lead analysis when reviewed per NSF/ANSI/CAN Standard 61, Section 3.3.

[1] Certified for use in clarifier tanks 2,000 cubic feet and greater installed in water
    treatment plants with a minimum daily flow of 50,000 gallons.

[1] All sizes.  Certified for an intended end use in water treatment facilities.

[1] Cartridge Filter Housings are certified for a minimum daily flow of 86,400 gallons per
    day.
    
    [AA]  MOC
          SS304 (S4), SS316(S6)
    
    [GG]  MOC
          SS304 (L4), SS316(L6)
    
    [NN]  BODY DIAMETER 
          Available range from 04 to 60 
    
    [OO]  QUANTITY OF FILTERS
          Available range from 1 to 400
    
    [HH]  QUANTITY OF FILTERS
          Available range from 12 to 245)
    
    [L]   FILTER LENGTH 
          10" (1), 20" (2), 30" (3), 40" (4), 50" (5)
    
    [FF]  FILTER LENGTH 
          20" (20), 40" (40), 60" (60), 80" (80)
    
    [DD]  INLET & OUTLET SIZE
          Available range from 2 to 20
    
    [P]   INLET CONFIGURATION STYLE (IF MODEL STANDARD, THIS MAY BE BLANK)
          Side in/side out (A), Inline (B), Side In Bottom Out (C), Same Side in/out (D), 
          Dual Side in/bottom out and same side in/out (CD), Top in/end out (E) 
    
    [EEE] DESIGN PRESSURE 
          150 PSI (150), 300 PSI (300), CUSTOM PRESSURE (###)
    
    [Q]   OPTIONAL NON-MATERIAL VESSEL MOFICATIONS (MAY NOT BE NOTED) 
          Standard mechanical davit (K1), Hinge (K2), Hydraulic jack davit side (K3), 
          Hydraulic jack davit top (K4), Pogo (K5), Hinge with spring assist (K6), 
          Hydraulic clam style (K7), Hydraulic top mount with side pump (K8), Hydraulic 
          jack davit side with bearings (K9)
    
[2] Multi Bag Filter Housings are certified for a minimum daily flow of 360,000 gallons per
    day.
    
    [AA]  MOC 
          SS304 (S4), SS316(S6)
    
    [NN]  BODY DIAMETER
          Available range from 04 to 60 [B] QUANTITY OF BAG FILTERS Available range from 1
    to 40  
    
    [CC]  BAG FILTER LENGTH  
          SIZE 1 (11), SIZE 2 (12)
     
    [DD]  INLET & OUTLET SIZE 
          Available range from 2 to 20
    
    [P]   INLET CONFIGURATION STYLE (IF MODEL STANDARD, THIS MAY BE BLANK)   
          Side in/side out (A), Inline (B), Side In Bottom Out (C), Same Side in/out (D), 
          Dual Side in/bottom out and same side in/out (CD), Top in/end out (E) 
     
    [EEE] DESIGN PRESSURE 
          150 PSI (150), 300 PSI (300), CUSTOM PRESSURE (###) 
    
    [Q]   OPTIONAL NON-MATERIAL VESSEL MOFICATIONS (MAY NOT BE NOTED) 
          Standard mechanical davit (K1), Hinge (K2), Hydraulic jack davit side (K3), 
          Hydraulic jack davit top (K4), Pogo (K5), Hinge with spring assist (K6), 
          Hydraulic clam style (K7), Hydraulic top mount with side pump (K8), Hydraulic 
          jack davit side with bearings (K9)
    
[3] Single Bag Filter housings are certified for a minimum daily flow of 360,000 gallons per
    day.
    
    [AA]  MOC
          SS304 (S4), SS316(S6) 
    
    [B]   QUANTITY OF BAG FILTERS 
          Available range from 1 to 40 [CC] BAG FILTER LENGTH SIZE 1 (11), SIZE 2 (12)
    
    [DD]  INLET & OUTLET SIZE 
          Available range from 2 to 20 
    
    [P]   INLET CONFIGURATION STYLE (IF MODEL STANDARD, THIS MAY BE BLANK) 
          Side in/side out (A), Inline (B), Side In Bottom Out (C), Same Side in/out (D), 
          Dual Side in/bottom out and same side in/out (CD), Top in/end out (E)  
    
    [EEE] Design pressure
          150 PSI (150), 300 PSI (300), CUSTOM PRESSURE (###)
    
    [Q]   OPTIONAL NON-MATERIAL VESSEL MOFICATIONS (MAY NOT BE NOTED)
          Standard mechanical davit (K1), Hinge (K2), Hydraulic jack davit side (K3), 
          Hydraulic jack davit top (K4), Pogo (K5), Hinge with spring assist (K6), Hydraulic
    
          clam style (K7), Hydraulic top mount with side pump (K8), Hydraulic jack davit
    side 
          with bearings (K9)
[4] Strainer Housings are certified for a minimum daily flow of 158,400 gallons per day. 
    
    [AA]  MOC
          SS304 (S4), SS316(S6)
    
    [J]   BODY CONFIGURATION STYLE 
          Inline (0), Offset (1), Same Side (2)
    
    [K]   CLOSURE AND BODY BASE CONFIGURATION STYLE 
          Swing bolt closure w/ flat bottom (A), ANSI closure w/ flat bottom (B), Swing bolt
    
          closure w/ domed bottom (C), ANSI closure w/ domed bottom (D) 
    
    [NN]  BODY DIAMETER 
          Available range from 04 to 60 
    
    [DD]  INLET & OUTLET SIZE 
          Available range from 2 to 36
    
    [P]   INLET CONFIGURATION STYLE (IF MODEL STANDARD, THIS MAY BE BLANK)
          Side in/side out (A), Inline (B), Side In Bottom Out (C), Same Side in/out (D),
    Dual 
          Side in/bottom out and same side in/out (CD), Top in/end out (E) 
    
    [MM]  DESIGN PRESSURE 
          ANSI 150 at 150F (1), ANSI 150 at 400F (2), ANSI 300 at 150F (3), ANSI 300 at 400F
    (4), 
          ANSI 600 at 150F (5), ANSI 600 at 400F (6), ANSI 900 at 150F (7), ANSI 900 at 400F
    (8), 
          ANSI 1500 at 150F (9), ANSI 1500 at 400F (10), ANSI 2500 at 150F (11), ANSI 2500
    at 
          400F (12)
    
    [Q]   OPTIONAL NON-MATERIAL VESSEL MOFICATIONS (MAY NOT BE NOTED) 
          Standard mechanical davit (K1), Hinge (K2), Hydraulic jack davit side (K3), 
          Hydraulic jack davit top (K4), Pogo (K5), Hinge with spring assist (K6), 
          Hydraulic clam style (K7), Hydraulic top mount with side 
          pump (K8), Hydraulic jack davit side with bearings (K9)
    
    [PPP] SCREEN SIZE
          Available range of 500 to 2,000
    
    [QQ]  SCREEN MOC
          SS316 (S6)
    
    [R]   CONTROL PANEL
          Semi-automatic (L1), Automatic (L2), Custom automatic (L3)

[1] Certified for a maximum surface area of 390 sq. ft.  
    
    Certified for a minimum daily flow of 1,530 gallons. Product requires a pre-rinse of 0.5
    hour (30 minutes) at 100 psi.
[2] Certified for a maximum surface area of 400 sq. ft.  
    
    Certified for a minimum daily flow of 1,530 gallons. Product requires a pre-rinse of 0.5
    hour (30 minutes) at 100 psi.
[3] Certified for a maximum surface area of 400 sq. ft.  
    
    Certified for a minimum daily flow of 2,059 liters. Product requires a pre-rinse of 0.5
    hour (30 minutes) at 100 psi.
[4] Certified for a maximum surface area of 480 sq. ft. Certified for a minimum permeate
    flow rate of 1,500 gallons/day. Product requires a 1 hour flush at 400 psi. 
[5] Certified for a maximum surface area of 400 sq. ft.  
    
    Certified for a minimum daily flow of 2,059 liters. Product requires a pre-rinse of 0.5
    hour (30 minutes) at 100 psi.
[6] Certified for a maximum surface area of 440 sq. ft.  
    
    Certified for a minimum daily flow of 7,140 gallons. Product requires a 1 hour flush at
    400 psi.
[7] SW30XLE-400 and SW30XLE-440 are certified for a minimum permeate flow rate of 8,200
    gallons/day.
    
    SW30XLE 400-34 (12113160) W and SW30XLE 400-34 (12113161) D are certified for a minimum
    permeate flow rate of 7,650 gallons/day.
    
    SW30XLE-440i and FilmTec™ SOAR 7000i are certified for a minimum permeate flow rate of
    1,500 gallons/day.
    
    Product requires a per-service flush for 1 hour at 400 psi.
[8] Certified for a maximum surface area of 440 sq. ft.  
    
    Certified for a minimum daily flow of 3,785 liters. Product requires a pre-rinse of 0.5
    hour (30 minutes) at 100 psi.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] TTN 100 is certified for a minimum daily permeate flow of 720,000 liters per day.
    TTN 200 is certified for a minimum daily permeate flow of 960,000 liters per day.
    TTN 400 is certified for a minimum daily permeate flow of 1,200,000 liters per day.
    TTN 500 is certified for a minimum daily permeate flow of 1,920,000 liters per day. 
    
    TTN 100 requires a 2 hour flush at a flow rate of 25 liters per minute (lpm) with tap
    water.
    TTN 200 requires a 2 hour flush at a flow rate of 60 liters per minute (lpm) with tap
    water.
    TTN 400 requires a 2 hour flush at a flow rate of 200 liters per minute (lpm) with tap
    water.
    TTN 500 requires a 2 hour flush at a flow rate of 250 liters per minute (lpm) with tap
    water.

[1] XX - Filter Length Code						
    20 - Filter Length						
    26 - Filter Length						
    40 - Filter Length						
    60 - Filter Length						
    Y  - Top End Cap Code						
    P  - High Flow Cap						
    1  - Bag Filter Cap						
    F  - Flare Cap						
    Z  - O-ring Seal Code						
    B  - Buna N						
    E  - EPDM						
    S  - Silicone						
    U  - Santoprene						
    Models are certified for a minimum daily filtrate generation of 4,750 gallons per 20" of
    length.				20" models (DPU-6##-PP20YZ-Q1, DP-6##-PP20YZ-Q1 ) are certified for a minimum
    daily filtrate generation of 4,750 gallons.						
    26" models (DPU-6##-PP26YZ-Q1, DP-6##-PP26YZ-Q1) are certified for a minimum daily
    filtrate generation of 6,175 gallons.						
    40" models (DPU-6##-PP40YZ-Q1, DP-6##-PP40YZ-Q1) are certified for a minimum daily
    filtrate generation of 9,500 gallons.						
    60" models (DPU-6##-PP60YZ-Q1, DP-6##-PP60YZ-Q1) are certified for a minimum daily
    filtrate generation of 14,250 gallons.
[2] Certified for minimum flow of 25 gallons per day.