NSF Product and Service Listings

[1] This product is Certified for a maximum use level of 125 mg/L.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] Certified for a minimum daily flow 40,000 liters (AKUALYS ASM), 80,000 (AKUALYS AGM),
    86,400 liters (AKUALYS APM 80T)and 90,000 liters (AKUALYS APM 80)and 97,200 liters
    (AKUALYS APM 90T).
[2] Membranes should be flushed with tap water before being placed into service at the
    following rates:
    AKUALYS ASM at 25 liters per minute for 240 minutes.
    AKUALYS AGM at 50 liters per minute for 240 minutes.
    AKUALYS APM at 57 liters per minute for 240 minutes.
    AKUALYS APM 80T at 60 liters per minute for 240 minutes.
    AKUALYS APM 90T at 68 liters per minute for 240 minutes.

[1] Certified for a minimum daily flow 40,000 liters (AKUALYS ASM), 80,000 (AKUALYS AGM),
    86,400 liters (AKUALYS APM 80T)and 90,000 liters (AKUALYS APM 80)and 97,200 liters
    (AKUALYS APM 90T).
[2] Membranes should be flushed with tap water before being placed into service at the
    following rates:
    AKUALYS ASM at 25 liters per minute for 240 minutes.
    AKUALYS AGM at 50 liters per minute for 240 minutes.
    AKUALYS APM at 57 liters per minute for 240 minutes.
    AKUALYS APM 80T at 60 liters per minute for 240 minutes.
    AKUALYS APM 90T at 68 liters per minute for 240 minutes.

[1] XX:Length
    10 = 10"
    20 = 20"
    30 = 30"
    40 = 40"
    50 = 50"
    60 = 60"
    70 = 70"
    
    YY: Pore Size
    1=1 m
    2=2 m
    3=3 m
    5=5 m
    7=7 m
    10=10 m
    15=15 m
    20=20 m
    25=25 m
    30=30 m
    40=40 m
    50=50 m
    
    10" models are certified for a minimum daily permeate generation of 1,000 liters for use
    in public water treatment facilities. 
    20" models are certified for a minimum daily permeate generation of 2,000 liters for use
    in public water treatment facilities. 
    30" models are certified for a minimum daily permeate generation of 3,000 liters for use
    in public water treatment facilities.
    40" models are certified for a minimum daily permeate generation of 4,000 liters for use
    in public water treatment facilities. 
    50" models are certified for a minimum daily permeate generation of 5,000 liters for use
    in public water treatment facilities. 
    60" models are certified for a minimum daily permeate generation of 6,000 liters for use
    in public water treatment facilities. 
    70" models are certified for a minimum daily permeate generation of 7,000 liters for use
    in public water treatment facilities.

[1] Type test only, no factory production control audits conducted pursuant to Section 1.2
    of ISO Guide 65.
[2] (1) Filter
        I   - Industrial
    (2) Nominal particle removal rating (microns)
        005 - 0.5 micron
        010 - 1 micron
        050 - 5 micron
        100 - 10 micron
        200 - 20 micron
        250 - 25 micron
        500 - 50 micron
    (3) Media
        P   - Polypropylene
    (4) Cartridge length
        100 - 10.0"
        296 - 29 5/8"
        300 - 30"
        400 - 40"
    (5) Nominal diameter 
        S   - Standard (1.1" x 2.5")
        E   - Economy (1.1" x 2 3/8")
        L   - Large (1.1" x 3.0")
        X   - Special order
    (6) Core material
        1   - Polypropylene
        4   - 304 Stainless steel
        5   - 316 Stainless steel
    (8) Core type
        SD  - Standard
        XD  - Double o-ring
        XC  - Extended
        XX  - Special order
[3] Only cartridges 10" and longer have been reviewed and evaluated for Standard 61.  This
    product has not been reviewed or evaluated for point-of-use or point-of-entry
    applications.

[1] The filtration level (micron) and color which are used in each SK filter and may be any
    of the following:
    10  - Light Blue
    20  – Grey
    40  - Purple
    55  – Green
    70  – Brown
    100 – Black
    130 – Red
    200 – Yellow
    400 – Blue
[2] The spring type may be any of the following alphabetic codes:
    HALAR    – HALAR Coating
    HSL      - Hastelloy
    LC       - Low Cost Energy
    LC-HALAR – Low-Cost Energy – HALAR Coating
    LCHSL    - Hastelloy-Low Cost Energy
    Regular (not indicated on product name)
[3] Inlet / outlet type may be any of the following:
    ARF - Flange
    Int - Integral
    Thr - Threaded
    Vic - Victaulic
[4] Certified for a minimum flow of 72,000 L/day.
[6] Certified for a minimum flow of 1,150,200 L/day.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] Product is certified for a minimum daily flow of 2,400,000 liters.
[2] These products have filtration levels of 10-800 microns.
[3] Certified for a minimum daily flow of 300,000 liters.
[4] Certified products are evaluated as POE systems.
[5] These products have filtration levels of 10-500 microns.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.
[11] Models EBS 10000 DW and EBS 15000 DW are certified for configurations O/L and I/L.

[6] Certified for a minimum daily flow of 144,000 liters.
[7] Certified for use in municipal water treatment plants only.
[8] Certified for 1-20 micron filters. Size is inlet/outlet diameter.
[9] Certified for a minimum daily flow of 900,000 liters.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.
[10] Certified for a minimum daily flow of 346,000 liters.

[1] Product requires a 12 hours flush at a flow rate of 10 liters per minute per square
    meter with pure water (RO production water).
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] Certified for the following sizes: 0.3 mm - 6.0 mm.

[1] This product is Certified for a maximum use of 4.7 g/L with a minimum flow rate of 20
    gpm/ft3.
[2] Certified for the following particle sizes: 14x40 mm, 12x20 mm, and 8x16 mm.

[1] Trade Name AFN-N8050D requires a pre-service flush at 4 gallons per minute (gpm) for 48
    hours with deionized or other purified water.
[2] Trade name AFN-N8050D is certified for a minimum daily permeate generation of 57,600
    liters for use in public water treatment facilities.

[3] Trade Name AFD-N1080 requires a pre-service flush at 6 gallons per minute (gpm) for 48
    hours with deionized or other purified water.
[4] Trade name AFD-N1080 is certified for a minimum daily permeate generation of 76,800
    liters for use in public water treatment facilities.

[1] BSG 20 and BSG 20T are certified for a minimum flow of 72,000 gal./day.
[2] BSG 25 and BSG 25T are certified for a minimum flow of 122,400 gal./day.
[3] BSG 30 and BSG 30T are certified for a minimum flow of 182,880 gal./day.
[4] BSG 40 and BSG 40T are certified for a minimum flow of 338,400 gal.day.
[5] BSG 50 and BSG 50T are certified for a minimum flow of 537,120 gal./day.
[6] BSG 60 and BSG 60T are certified for a minimum flow of 802,080 gal.day.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] Certified for all sizes between 0.3 mm & 6.0 mm.

[1] Certified for the following sizes: 0.3 mm - 6.0 mm.

[1] XXX is used as a reference to the treatment capacity in liters per second.
[2] Certified for a minimum daily permeate generation of 10,500 L.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] The UNA-620AB is certified for a minimum daily flow of 31,200 liters per day.
    The UNA-620A and UNA620A-ADA are certified for a minimum daily flow of 24,000 litters
    per day.
[2] UNA620A-DCA is certified for a minimum daily flow of 47,520 liters per day.
[3] The UNA-620AB, UNA620A-ADA, UNA620A-DCA and UNA-620A are flushed for 2 hours at a flow
    rate of 33.3 liters per minute with UF/MF filtered de-ionized water.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] The UNA-620AB is certified for a minimum daily flow of 31,200 liters per day. 
    The UNA-620A and UNA620A-ADA are certified for a minimum daily flow of 24,000 liters per
    day. 
    The UNA-660A is certified for a minimum daily flow of 19,200 liters per day.
    The UNA-600A is certified for a minimum daily flow of 1,040 liters per day.
[2] The UNA-620AB, UNA620A-ADA and UNA-620A are flushed for 2 hours at a flow rate of 33.3
    liters per minute with UF/MF filtered de-ionized water.
    The UNA-660A is flushed for 2 hours at a flow rate of 26.6 liters per minute with UF/MF
    filtered de-ionized water.
    The UNA-600A is flushed for 2 hours at a flow rate of 16.7 liters per minute with UF/MF
    filtered de-ionized water.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] Certified for the following mesh sizes: 4x8, 14x40, and 30x60.
    Certified for a maximum use level of 66 g/L.

[1] All sizes. Certification is based on an intended end use in a water treatment
    facilities.  Parts can be made using reinforced Polyester or Vinylester resin.
[2] Certified for:
    10' ReadyLadder + Walk Through Kit for 8,000 gallon tanks and greater.
    15' ReadyLadder + Walk Through Kit for 10,000 gallon tanks and greater.
    Parts can be made using reinforced Polyester or Vinylester resin.

[1] Size is expressed as OD x length.
[2] Certified for a minimum daily flow of 31,200 L.
[3] Membranes should be flushed with tap water for 10 minutes before being placed into
    service at the following flow rates:			
    SMT600-P23 at 38 liters per minute			
    SMT600-P38 at 63 liters per minute			
    SMT600-P40 at 67 liters per minute			
    SMT600-P50 at 85 liters per minute			
    SMT600-P51 at 85 liters per minute			
    SMT600-P52 at 85 liters per minute			
    SMT600-P55 at 90 liters per minute			
    SMT600-P56 at 93 liters per minute			
    SMT600-P57 at 93 liters per minute			
    SMT600-P60 at 99 liters per minute			
    SMT600-P72 at 120 liters per minute			
    SMT600-P80 at 134 liters per minute			
    SMT600-P81 at 133 liters per minute
[4] The following membranes should be flushed by submerging the module in a tank and
    allowing it to run with tap water for 10 minutes before being placed into service at the
    following flow rates:	
    SMT600-S26 at 43 liters per minute
    SMT600-S28 at 47 liters per minute
    SMT600-S30 at 60 liters per minute
    SMT600-S50 at 85 liters per minute
    The water in the tank should then be drained.

[1] The Certification of this product requires that the use levels of each of the media
    types not exceed the following maximum use levels (in grams of media per liter of
    water):
    BIOCERA-SP ball - 1500 g/L
    BIOCERA-IP ball - 10 g/L
    BIOCERA-PW ball - 10 g/L
    BIOCERA-TO ball - 10 g/L
    BIOCERA-CA ball - 10 g/L
    BIOCERA-AO ball - 10 g/L
    BIOCERA-RC ball - 10 g/L
    BIOCERA-AG ball - 10 g/L
    The media types can be used in any combination provided the use level for each media
    type does not exceed the levels stated above.

[1] Certification does not include any end connection, gasket, or o-ring options. Product
    has not been evaluated for point-of-end (POE) or point-or-use (POU) end uses.
[2] Certified for a minimum daily flow of 1,870 L per 3" of cartridge length.
[3] X - Retention Rating: 0.5 µm - 200 µm
[4] XX - Cartridge Length: 3" - 100"
[5] Inner Diameter: 28 mm
[6] Outer Diameter: 60 mm - 115 mm
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] Only products bearing the NSF Mark on the product, product packaging, and/or
    documentation shipped with the product are Certified.
[2] Certified for use in municipal water treatment plants only.
[3] Certified for a minimum daily flow of 200 liters per day.
[4] Certified for a minimum daily flow of 500 liters per day.
[5] Certified for a minimum daily flow of 7,000 liters per day.
[6] Certified for a minimum daily flow of 30,000 liters per day.

[1] Certified for the following mesh sizes: 5/8; 8/12; 8/14; 12/18; 16/20; 16/30; 20/40;
    30/50; 40/60; 40/70; 60/80
[2] Certified for the following mesh size: 12/18; 16/20; 16/30; 20/40; 30/50

[1] Certified for the following mesh sizes: 5/8, 8/12, 8/14, 16/20, 16/30, 20/40, 30/50,
    40/60, 40/70, 60/80.
[2] Certified for the following mesh size: 16/20, 16/30, 20/40, 30/50.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] The SiC BLOX FX series stack is certified for a minimum daily permeate flow of 10,000
    liters per day per module, up to ten (10) modules.
[2] The SiC BLOX FX series stack requires a 10.5 gallons per minute (gpm) flush per module
    up to ten (10) for for five minutes with de-ionized water before use.
[3] The SiC BLOX FX series is certified for municipal treatment facilities end use.

[1] The SiC BLOX FX series stack is certified for a minimum daily permeate flow of 10,000
    liters per day per module, up to ten (10) modules.
[2] The SiC BLOX FX series stack requires a 10.5 gallons per minute (gpm) flush per module
    up to ten (10) for for five minutes with de-ionized water before use.
[3] The SiC BLOX FX series is certified for municipal treatment facilities end use.

[1] Following models are certified for a minimum flow of 14,000 liters per day and requires
    a 10 liters per minute flush for ten (10) minutes with tap water before use:   
    
    CFT-0000-SMSEC6-2019 
    CFT-0000-BMSEC6-2019
    CFT-0000-SMSEC4-2022
    CFT-0000-BMSEC4-2022
    CFT-0000-SMSEC6-1016
    CFT-0000-BMSEC6-1016
    CFT-0000-SMSEC6-1019
    CFT-0000-BMSEC6-1019
    CFT-0000-HS0006-0000 
    CFT 0000-BS0006-0000
    
    CFT-0000-SC0EC6-1016, CFT-0000-SC0EC6-1019, CFT-0000-SC0EC6-2019, CFT-0000-SC0EC4-2022
    are certified for a minimum flow of 348 liters per day.
    
    The Ceramic Plate CFT-0000-SC0EC6-1016, CFT-0000-SC0EC6-1019, CFT-0000-SC0EC6-2019,
    CFT-0000-SC0EC4-2022 require a 0.5 liters per minute flush for ten (10) minutes with tap
    water before use.
    
    CFT-0000-HS0006-0000 and CFT 0000-BS0006-0000 are to be used with CFT-0000-SMSEC6-2019,
    CFT-0000-BMSEC6-2019, CFT-0000-SMSEC4-2022, CFT-0000-BMSEC4-2022, CFT-0000-SMSEC6-1016,
    CFT-0000-BMSEC6-1016, CFT-0000-SMSEC6-1019, and CFT-0000-BMSEC6-1019. 
    
    CFT-0000-SC0EC6-1016 are to be used with CFT-0000-SMSEC6-1016, CFT-0000-BMSEC6-1016
    only.
    CFT-0000-SC0EC6-1019 are to be used with CFT-0000-SMSEC6-1019, CFT-0000-BMSEC6-1019
    only.
    CFT-0000-SC0EC6-2019 are to be used with CFT-0000-SMSEC6-2019, CFT-0000-BMSEC6-2019
    only.
    CFT-0000-SC0EC4-2022 are to be used with CFT-0000-SMSEC4-2022, CFT-0000-BMSEC4-2022
    only.
    
    Certified for use with a 384 L tank or greater.

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] Products are certified for a minimum daily flow of 2880 liters per day for use in public
    water treatment facilities.

[1] This product is Certified for a maximum use level of 168 g/L.
[2] Certified for the following mesh sizes: 4 x 8, 8 x 12, 8 x 16, 8 x 30, 12 x 20, 14 x 40
    and 16 x 30.

[1] All sizes and gradations

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] This product is Sphagnum Moss and is Certified for a maximum use level of 1.6 grams
    (dry)/gallon.

[1] This product is to be rinsed following the procedures outlined below before start-up:
    Upwash with 10 bed volumes at a rate of 30 m/h to achieve an expansion of 60%. Forward
    rinse to waste at 20 m/h to settle the bed and ensure that all fine material has been
    removed prior to putting the adsorber into service.

[1] The carbon source is coal.

[1] This product is Certified for a maximum use level of 125 mg/L.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] Follow manufacturers use instructions for backwashing after periods in ''standby'' mode.
    Certification includes modules only.
[2] 4 S10T (Part# 119035) is a 4-pack of four #119005 modules in one box.

[1] Follow manufacturers use instructions for backwashing after periods in ''standby'' mode.
    Certification includes modules only.
[2] 4 S10T (Part# 119035) is a 4-pack of four #119005 modules in one box.
[3] Certified for a minimum daily permeate generation of 8,182 L for use in public water
    treatment facilities.
[4] Product is pre-flushed at 5 gallons per minute for 2 hours with chlorine CIP wash
[5] Certified for a minimum daily flow of 40,200 L.
[6] Certified for a minimum daily flow of 668,160 liters.
[7] Product to be flushed at 160 gpm for 2 hours using Chlorine CIP to sanitize system and
    piping prior to use.
[8] Certified for a minimum daily flow of 1,357,200 liters.
[9] Product to be flushed at 325 gpm for 2 hours using Chlorine CIP to sanitize system and
    piping prior to use.
[10] B40N Module Part # 118182, 118247, 118317, 118329 is certified for a minimum daily
     permeate generation of 9,600 L.
     
     B50N-L Module Part # 118324 is certified for a minimum daily permeate generation of
     12,000 L.
     
     B50N Module Part # 118322 is certified for a minimum daily permeate generation of 12,000
     L.
     
     MBR MemRACK is certified for a minimum daily permeate generation of 9,600 L.
[11] B40N Module Part # 118182, 118247, 118317, 118329 requires a pre-service flush at 14
     liters per minute for 20 minutes using tap or influent* water.
     
     B50N-L Module Part # 118324 and B50N Module Part # 118322 require a pre-service flush at
     17 liters per minute for 20 minutes using tap or influent* water.
     
     *If using influent water for the initial flush, follow the flush by disinfecting with a
     1,000 ppm chlorine (NaOCl) solution for 2 hours followed by a 20 minute flush to waste.
[12] Certified for a minimum daily flow of 80,400 liters per day
[13] Product to be flushed at 10.3 gallon per minute for 2 hours using Chlorine CIP to
     sanitize system and piping prior to use.
[14] Product to be flushed at 20 gallon per minute for 2 hours using Chlorine CIP to sanitize
     system and piping prior to use.
[15] Product is pre-flushed for 2 hours with chlorine CIP wash to sanitize system.
[16] Certified for a minimum of 6,000 liters per day.
[17] Product to be flushed at 1.5 gallons per minute for 2 hours.

[1] Certified for point-of-entry (POE) and municipal end uses.
[2] EGBFE4-[basket size]-[port size]-[port
    style]-[outlet]-[material]-[P-rating]-[finish]-[MC]
    [basket size] - 12 (Size #4)
    [port size]   - 1N (1"FNPT)
    [outlet]      - 3 (bottom & opposite side outlet)[material] - 4 (304SS), 6 (316SS)
    [P-rating]    - 30 (300psi)
    [finish]      - GB (glass bead)
    [MC]          - NSF-61 certified
[3] EGBFV8-[basket size]-[port size]-[port
    style]-[outlet]-[material]-[P-rating]-[finish]-[ASME status]-[MC]
    [basket size] - 15 (Size #1), 30 (Size #2), 230 (twin Size #2)
    [port size]   - 1 through 8 (1" through 8")
    [port style]  - N (NPT), F (flange), T (sanitary ferrule)
    [outlet]      - 1 (bottom outlet), 2 (opposite side outlet), 3 (bottom & opposite side 
                    outlet), 5 (same side outlet)
    [material]    - 4 (304SS), 6 (316SS)
    [P-rating]    - 15 (150psi)
    [finish]      - GB (glass bead), EP (electropolished)
    [ASME status] - U (ASME Code), blank (non-code)
    [MC]          - NSF-61 certified
[4] EGFHD1-[length]-[port size]-[adapter type]-[material]-[P-rating]-[MC]
    [length]       - 5, 10, 20, 30 (5", 10", 20", 30")
    [port size]    - 75N (3/4"NPT), 1N (1"NPT), 75B (3/4"BSPP), 1B (1" BSPP)
    [adapter type] - D (DOE), 2 (222), 6 (226)
    [material]     - 4 (304), 6 (316)
    [P-rating]     - 30 (300psi)
    [MC]           - NSF-61 certified
[5] EGMBE-[basket quantity]-[basket size]-[port size &
    style]-[material]-[P-rating]-[finish]-[MC]
    [basket quantity]   - 4, 6, 8, or 12
    [basket size]       - 30 (Size #2)
    [port size & style] - 4, 6, 8, or 10 (4", 6", 8", or 10" flange)
    [material]          - 4 (304SS), 6 (316SS)
    [P-rating]          - 15 (150psi)
    [finish]            - GB (glass bead)
    [MC]                - NSF-61 certified
[6] EGMBV-[basket quantity]-[basket size]-[port size &
    style]-[material]-[P-rating]-[finish]-[ASME status]-[MC]
    [basket quantity]   - 4, 6, 8, or 12
    [basket size]       - 30 (Size #2)
    [port size & style] - 4, 6, 8, or 10 (4", 6", 8", or 10" flange)
    [material]          - 4 (304SS), 6 (316SS)
    [P-rating]          - 15 (150psi)
    [finish]            - GB (glass bead)
    [ASME status]       - U (ASME Code), blank (non-code)
    [MC]                - NSF-61 certified
[7] EGTCH-[qty of cartridges]-[length]-[port
    size]-[outlet]-[material]-[P-rating]-[finish]-[ASME status]-[MC]
    [quantity of cartridges] - 3, 5, 7, 12, 21
    [length]                 - 1 (10"), 2 (20"), 3 (30"), 4 (40"
    [port size]              - 1 through 8 (1" through 8")
    [port style]             - N (NPT), F (flange), T (sanitary ferrule)
    [outlet]                 - 1 (bottom outlet), 2 (opposite outlet)
    [material]               - 4 (304SS), 6 (316SS)
    [P-rating]               - 15 (150psi)
    [finish]                 - GB (glass bead), EP (electropolished)
    [ASME status]            - U (ASME Code), blank (non-code)
    [MC]                     - NSF-61 certified
[8] EGTCHB-[qty of cartridges]-[length]-[port size]-[outlet
    location]-[material]-[P-rating]-[finish]-[MC]
    [quantity of cartridges] - 3, 4, 5, 7, 12, 22
    [length]                 - 1 (10"), 2 (20"), 3 (30"), 4 (40")
    [port size]              - 1 through 8 (1" through 8")
    [port style]             - M (NPT), F (flange), T (sanitary ferrule)
    [outlet location]        - 1 (bottom outlet), 2 (opposite outlet)
    [material]               - 4 (304SS), 6 (316SS)
    [P-rating]               - 15 (150psi)
    [finish]                 - PC (polycoat)
    [MC]                     - NSF-61 certified
[9] Certified for the following part numbers: 
    
    EMuniclear-EMB
    EGWTB[BB][Micron]A[Length][End Cap Code][O-ring][Bond][Core][Suffix]
    EGCTB[Micron]A[Length][End Cap Code][O-ring][Bond][Core]
    EGATB[Micron]A[Length][End Cap Code][O-ring][Bond][Core]
    [BB]   - Blank (2.5" OD), BB (4" OD)
    [Bond] - Blank (adhesive bond), TB (thermally bonded)
    [Core] - Blank (no core), PC (polypropylene core)
    [Suffix] - Blank (standard), MC (MC trade name)
    
    Emuniclear-ESW
    EGP[Micron]A[Length]P[End Caps][O-ring]-MC
     
    [Micron]  - 1, 3, 5, 10, 25, 50 
    [Length]  - 9.75" - 60" 
    [End Cap] - Blank (None; DOE, No gaskets), 3 (222 w/fin), 4 (222 w/flat cap), 5 (222
                w/spring), 6 (226 w/flat cap), 7 (226 w/fin), 8 (226 w/spring), 9 (SOE
                w/spring), 10 (DOE w/PP Core extender), 13 (SOE w/ PP Core Ext/Spring) 
    [O-ring]  - B (Buna N), E (EPDM), S (Silicone), Blank (None)
[10] Certified for a minimum daily flow of 4,320 gallons per 10" equivalent.
[11] Certified for the following part numbers:
     
     [Series][Micron][Efficiency][Length]C[End Cap Code][O-ring]
     [Series] - EPP (2.7"OD); EPPE (2.5"OD); EPG (2.7"OD with reduced area) 
     [Micron] - 0.1 to 40
     [Efficiency] - A (absolute), N (nominal)
     [Length]  - 9.75" to 40"
     [Options] - I (stainless steel inserts), SS (stainless steel core), R (18 mega-ohm 
                 rinse), CS (stainless steel spring)
     [End Cap] - 2 (DOE with gaskets), 3 (222 w/fin), 4 (222 w/flat cap), 5 (222 w/spring), 6
     
                 (226 w/flat cap), 7 (226 w/fin), 8 (226 w/spring), 16 (213 with flat cap), 
                 28 (222 with tabs)
     [O-ring] - B (Buna N), E (EPDM), S (silicone)
[12] Certified for a minimum daily flow of 600 gallons per day.  Certified for use in
     municipal water treatment facilities only.

[13] Model number format:
     [series] [media] [micron rating] [efficiency] [length] [top type] [hardward] [oring]
     [series] - "EHF", "EHF3", "EEHF3"
     [media] - PP (polypropylene)
     [micron rating] - 0.2 to 100um
     [efficiency] - A (absolute), N (nominal)
     [length] - 10" to 60", "1" (size #1), "2" (size #2)
     [top type] - none, or "A", "B", "C", "D", "E", or "S"
     [hardware] - none, or "P" (polypropylene)
     [Oring] - B (buna), E (EPDM), S (silicone)
     Certified for a minimum daily flow of 2,000 gallons
[14] EHF-Series Filter Cartridges- Diameter: 6" Length : 20" to 80"
     EEHF3-Series Filter Cartridges- Diameter: 6" Length :20" to 60"
     EHF3-Series Filter Cartridges- Diameter: 6" Length : 20" to 60"
[15] Model number format:
     [series] [media] [micron rating] [efficiency] [length] [top type] [hardward] [oring]	
     [series] - "EHFB"
     [media] - PP (polypropylene)		
     [micron rating] - 0.2 to 100um		
     [efficiency] - A (absolute), N (nominal)	
     [length] - 10" to 60", "1" (size #1), "2" (size #2)	
     [top type] - none, or "A", "B", "C", "D", "E", or "S"	
     [hardware] - none, or "P" (polypropylene)		
     [Oring] - B (buna), E (EPDM), S (silicone)	
     Certified for a minimum daily flow of 2,000 gallons
[16] EHFB-Series Filter Cartridges - Diameter:6" Length: 12" to 24".

[1] Certified for a maximum use level of 1,000 mg/L.

[1] Certified for a maximum use level of 1,000 mg/L.
[2] Only products bearing the NSF Mark on the product, product packaging, and/or
    documentation shipped with the product are Certified.

[1] This product is Certified for a maximum use level of 44 g/L.

[1] Certified for minimum flow rate of 6,144 liters per day.
[2] Must be flushed with tap water at 8 liters per minute for 1 hour.
[3] Certified for minimum flow rate of 29,040 liters per day.
[4] Must be flushed with tap water at 33 liters per minute for 1 hour.
[5] Certified for minimum flow rate of 40,480 liters per day.
[6] Must be flushed with tap water at 50 liters per minute for 1 hour.
[7] Certified for minimum flow rate of 58,960 liters per day.
[8] Must be flushed with tap water at 75 liters per minute for 1 hour.

[1] This product is Certified for a maximum use level of 125 mg/L.

[1] This product is to be rinsed following the procedures outlined below before start-up:
    Upwash with 10 bed volumes at a rate of 30 m/h to achieve an expansion of 60%.
    Forward rinse to waste at 20 m/h to settle the bed and ensure that all fine material has
    been removed prior to putting the adsorber into service.

[1] Cartridge Filter Housings are certified for a minimum daily flow of 86,400 gallons per
    day.
    
    [AA]  MOC
          SS304 (S4), SS316(S6)
    
    [GG]  MOC
          SS304 (L4), SS316(L6)
    
    [NN]  BODY DIAMETER 
          Available range from 04 to 60 
    
    [OO]  QUANTITY OF FILTERS
          Available range from 1 to 400
    
    [HH]  QUANTITY OF FILTERS
          Available range from 12 to 245)
    
    [L]   FILTER LENGTH 
          10" (1), 20" (2), 30" (3), 40" (4), 50" (5)
    
    [FF]  FILTER LENGTH 
          20" (20), 40" (40), 60" (60), 80" (80)
    
    [DD]  INLET & OUTLET SIZE
          Available range from 2 to 20
    
    [P]   INLET CONFIGURATION STYLE (IF MODEL STANDARD, THIS MAY BE BLANK)
          Side in/side out (A), Inline (B), Side In Bottom Out (C), Same Side in/out (D), 
          Dual Side in/bottom out and same side in/out (CD), Top in/end out (E) 
    
    [EEE] DESIGN PRESSURE 
          150 PSI (150), 300 PSI (300), CUSTOM PRESSURE (###)
    
    [Q]   OPTIONAL NON-MATERIAL VESSEL MOFICATIONS (MAY NOT BE NOTED) 
          Standard mechanical davit (K1), Hinge (K2), Hydraulic jack davit side (K3), 
          Hydraulic jack davit top (K4), Pogo (K5), Hinge with spring assist (K6), 
          Hydraulic clam style (K7), Hydraulic top mount with side pump (K8), Hydraulic 
          jack davit side with bearings (K9)
    
[2] Multi Bag Filter Housings are certified for a minimum daily flow of 360,000 gallons per
    day.
    
    [AA]  MOC 
          SS304 (S4), SS316(S6)
    
    [NN]  BODY DIAMETER
          Available range from 04 to 60 [B] QUANTITY OF BAG FILTERS Available range from 1
    to 40  
    
    [CC]  BAG FILTER LENGTH  
          SIZE 1 (11), SIZE 2 (12)
     
    [DD]  INLET & OUTLET SIZE 
          Available range from 2 to 20
    
    [P]   INLET CONFIGURATION STYLE (IF MODEL STANDARD, THIS MAY BE BLANK)   
          Side in/side out (A), Inline (B), Side In Bottom Out (C), Same Side in/out (D), 
          Dual Side in/bottom out and same side in/out (CD), Top in/end out (E) 
     
    [EEE] DESIGN PRESSURE 
          150 PSI (150), 300 PSI (300), CUSTOM PRESSURE (###) 
    
    [Q]   OPTIONAL NON-MATERIAL VESSEL MOFICATIONS (MAY NOT BE NOTED) 
          Standard mechanical davit (K1), Hinge (K2), Hydraulic jack davit side (K3), 
          Hydraulic jack davit top (K4), Pogo (K5), Hinge with spring assist (K6), 
          Hydraulic clam style (K7), Hydraulic top mount with side pump (K8), Hydraulic 
          jack davit side with bearings (K9)
    
[3] Single Bag Filter housings are certified for a minimum daily flow of 360,000 gallons per
    day.
    
    [AA]  MOC
          SS304 (S4), SS316(S6) 
    
    [B]   QUANTITY OF BAG FILTERS 
          Available range from 1 to 40 [CC] BAG FILTER LENGTH SIZE 1 (11), SIZE 2 (12)
    
    [DD]  INLET & OUTLET SIZE 
          Available range from 2 to 20 
    
    [P]   INLET CONFIGURATION STYLE (IF MODEL STANDARD, THIS MAY BE BLANK) 
          Side in/side out (A), Inline (B), Side In Bottom Out (C), Same Side in/out (D), 
          Dual Side in/bottom out and same side in/out (CD), Top in/end out (E)  
    
    [EEE] Design pressure
          150 PSI (150), 300 PSI (300), CUSTOM PRESSURE (###)
    
    [Q]   OPTIONAL NON-MATERIAL VESSEL MOFICATIONS (MAY NOT BE NOTED)
          Standard mechanical davit (K1), Hinge (K2), Hydraulic jack davit side (K3), 
          Hydraulic jack davit top (K4), Pogo (K5), Hinge with spring assist (K6), Hydraulic
    
          clam style (K7), Hydraulic top mount with side pump (K8), Hydraulic jack davit
    side 
          with bearings (K9)
[4] Strainer Housings are certified for a minimum daily flow of 158,400 gallons per day. 
    
    [AA]  MOC
          SS304 (S4), SS316(S6)
    
    [J]   BODY CONFIGURATION STYLE 
          Inline (0), Offset (1), Same Side (2)
    
    [K]   CLOSURE AND BODY BASE CONFIGURATION STYLE 
          Swing bolt closure w/ flat bottom (A), ANSI closure w/ flat bottom (B), Swing bolt
    
          closure w/ domed bottom (C), ANSI closure w/ domed bottom (D) 
    
    [NN]  BODY DIAMETER 
          Available range from 04 to 60 
    
    [DD]  INLET & OUTLET SIZE 
          Available range from 2 to 36
    
    [P]   INLET CONFIGURATION STYLE (IF MODEL STANDARD, THIS MAY BE BLANK)
          Side in/side out (A), Inline (B), Side In Bottom Out (C), Same Side in/out (D),
    Dual 
          Side in/bottom out and same side in/out (CD), Top in/end out (E) 
    
    [MM]  DESIGN PRESSURE 
          ANSI 150 at 150F (1), ANSI 150 at 400F (2), ANSI 300 at 150F (3), ANSI 300 at 400F
    (4), 
          ANSI 600 at 150F (5), ANSI 600 at 400F (6), ANSI 900 at 150F (7), ANSI 900 at 400F
    (8), 
          ANSI 1500 at 150F (9), ANSI 1500 at 400F (10), ANSI 2500 at 150F (11), ANSI 2500
    at 
          400F (12)
    
    [Q]   OPTIONAL NON-MATERIAL VESSEL MOFICATIONS (MAY NOT BE NOTED) 
          Standard mechanical davit (K1), Hinge (K2), Hydraulic jack davit side (K3), 
          Hydraulic jack davit top (K4), Pogo (K5), Hinge with spring assist (K6), 
          Hydraulic clam style (K7), Hydraulic top mount with side 
          pump (K8), Hydraulic jack davit side with bearings (K9)
    
    [PPP] SCREEN SIZE
          Available range of 500 to 2,000
    
    [QQ]  SCREEN MOC
          SS316 (S6)
    
    [R]   CONTROL PANEL
          Semi-automatic (L1), Automatic (L2), Custom automatic (L3)

[1] Certified for a maximum surface area of 390 sq. ft.  
    
    Certified for a minimum daily flow of 1,530 gallons. Product requires a pre-rinse of 0.5
    hour (30 minutes) at 100 psi.
[2] Certified for a maximum surface area of 400 sq. ft.  
    
    Certified for a minimum daily flow of 1,530 gallons. Product requires a pre-rinse of 0.5
    hour (30 minutes) at 100 psi.
[3] Certified for a maximum surface area of 400 sq. ft.  
    
    Certified for a minimum daily flow of 2,059 liters. Product requires a pre-rinse of 0.5
    hour (30 minutes) at 100 psi.
[4] Certified for a maximum surface area of 480 sq. ft. Certified for a minimum permeate
    flow rate of 1,500 gallons/day. Product requires a 1 hour flush at 400 psi. 
[5] Certified for a maximum surface area of 400 sq. ft.  
    
    Certified for a minimum daily flow of 2,059 liters. Product requires a pre-rinse of 0.5
    hour (30 minutes) at 100 psi.
[6] Certified for a maximum surface area of 440 sq. ft.  
    
    Certified for a minimum daily flow of 7,140 gallons. Product requires a 1 hour flush at
    400 psi.
[7] SW30XLE-400 and SW30XLE-440 are certified for a minimum permeate flow rate of 8,200
    gallons/day.
    
    SW30XLE 400-34 (12113160) W and SW30XLE 400-34 (12113161) D are certified for a minimum
    permeate flow rate of 7,650 gallons/day.
    
    SW30XLE-440i and FilmTec™ SOAR 7000i are certified for a minimum permeate flow rate of
    1,500 gallons/day.
    
    Product requires a per-service flush for 1 hour at 400 psi.
[8] Certified for a maximum surface area of 440 sq. ft.  
    
    Certified for a minimum daily flow of 3,785 liters. Product requires a pre-rinse of 0.5
    hour (30 minutes) at 100 psi.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] IntegraTec™ XTP 100 is certified for a minimum daily flow of 88,000 L.
    All other models are certified for a minimum daily flow of 18,612 L.
[2] Size is expressed as diameter x length.
[3] The Fiber Repair Kit has been approved for use with these modules.
[4] Also Certified for equivalent metric sizes.
[5] Size:
    IPD-51 Module (8" x 60")
    IPD-77 Module (8" x 80")
    IPD-51XP Module (8" x 60")
    IPD-77XP Module (8" x 80")
    The last number in the model designation refers to the number of modules in the skid.
[6] IntegraTec™ XP 36 ESI requires a pre-service flush of six (6) gallons per minute (gpm)
    for four (4) hours with tap water.
[7] Certified for a minimum daily flow of 44,000 liters per day. 
[8] Flushing Procedure:  The IntegraFlo IC-52XP is flushed for 4 hours at a flow rate of 7
    gallons per minute with de-ionized water.

[1] TTN 100 is certified for a minimum daily permeate flow of 720,000 liters per day.
    TTN 200 is certified for a minimum daily permeate flow of 960,000 liters per day.
    TTN 400 is certified for a minimum daily permeate flow of 1,200,000 liters per day.
    TTN 500 is certified for a minimum daily permeate flow of 1,920,000 liters per day. 
    
    TTN 100 requires a 2 hour flush at a flow rate of 25 liters per minute (lpm) with tap
    water.
    TTN 200 requires a 2 hour flush at a flow rate of 60 liters per minute (lpm) with tap
    water.
    TTN 400 requires a 2 hour flush at a flow rate of 200 liters per minute (lpm) with tap
    water.
    TTN 500 requires a 2 hour flush at a flow rate of 250 liters per minute (lpm) with tap
    water.

[1] XX - Filter Length Code						
    20 - Filter Length						
    26 - Filter Length						
    40 - Filter Length						
    60 - Filter Length						
    Y  - Top End Cap Code						
    P  - High Flow Cap						
    1  - Bag Filter Cap						
    F  - Flare Cap						
    Z  - O-ring Seal Code						
    B  - Buna N						
    E  - EPDM						
    S  - Silicone						
    U  - Santoprene						
    Models are certified for a minimum daily filtrate generation of 4,750 gallons per 20" of
    length.				20" models (DPU-6##-PP20YZ-Q1, DP-6##-PP20YZ-Q1 ) are certified for a minimum
    daily filtrate generation of 4,750 gallons.						
    26" models (DPU-6##-PP26YZ-Q1, DP-6##-PP26YZ-Q1) are certified for a minimum daily
    filtrate generation of 6,175 gallons.						
    40" models (DPU-6##-PP40YZ-Q1, DP-6##-PP40YZ-Q1) are certified for a minimum daily
    filtrate generation of 9,500 gallons.						
    60" models (DPU-6##-PP60YZ-Q1, DP-6##-PP60YZ-Q1) are certified for a minimum daily
    filtrate generation of 14,250 gallons.
[2] Certified for minimum flow of 25 gallons per day.

[1] Certified to a minimum flow rate of 10 gpm/sq.ft.

[1] NNN FTP-L BL [IS] PNYY [BE] and MM FTC-L PNYY are certified for a minimum flow of
    360,000 liters per day.
    NNN FTP-L BL XL [IS] PNYY [BE], NNN FTP-L SFL [IS] PNYY HTAL/VTAL [BE], NNN FTP-L B PNYY
    HTAL/VTAL [BE], MM B FTP-L PNYY, NNN FTP-L FL PNYY HTAL/VTAL [BE], NNN FTP-L EX PNYY
    [BE], and NNN FTP-L C PNYY [BE] are certified for a minimum flow of 2,800,000 liters per
    day.
    MM HF FTP-L PNYY HTAL/VTAL [BE] is certified for a minimum flow of 2,160,000 liters per
    day.
    SMP XXXD LZZZZ PNYY [PTFE] and i-UF KK PNYY are certified for a minimum flow of 360,000
    liters per day.
    JJJJ FTAUR-PPPP PRFV/ PNYY is certified for a minimum flow of 3,600,000 liters per day.
    
    All models require a pre-service flush with tap water at 7 gpm for a half hour.
    
    Certified for municipal use.
    
    The SMP "static mixers" are sold individually and/or as an optional add on for FTP- BL,
    FTP- BL XL, FTP- SFL, FTP- B, B FTP, FTC, FTP- FL,HF
    FTP, FTP-EX, FTP-C, FTAUR, i-UF or v-UF filter housings.
[2] Explanation of code/prefix on trade names:
    NNN: number of cartridges (7–470)
    MM: number of bags or baskets (5 – 52)
    KK: number of UF modules (5-60)
    L: length of the cartridges (30”-70” in multiples of 10”)
    BL: cartridges filter boltless opening
    BL XL: cartridges filter boltless opening extra length
    B: bags system (cartridges connection system)
    SFL: single flange (cartridges connection system)
    FTC: basket system (cartridges connection system)
    FL: double flange (cartridges connection system)
    HF: high flow (cartridges connection system)
    EX: removable filtering element (cartridges connection system)
    C: bell cartridge filter (cartridges connection system)
    FTAUR: self-cleaning filter (cartridges connection system)
    XXX: diameter of mixer (250–2000mm)
    ZZZZ: length of the mixer
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] Certified for 3 sq. m/L.
[2] Membranes are for municipal use only.
[3] Certification only includes the Ion Exchange Membrane Type 1, 2, 3, 6 and 10 and does
    not include spacers or any other parts.
[4] Only products bearing the NSF Mark on the product, product packaging, and/or
    documentation shipped with the product are Certified.
[5] Conditioning procedure:
    a) The Anion and Cation Exchange Membranes should be immersed in tap water for one night
    
       (minimum contact time 17 hours) before use in room temperature to ensure conditioning
    
       and swelling of the membrane. The tap or purified water volume/membrane are ratio is:
    
       16 L for 1 m2.
    b) Rinse the membranes with tap or purified water after conditioning and prior to
    cutting 
       and stack making.
       Flushing procedure:
    a) 15 min flushing with tap or purified water at 0.5 L/min/m2
    b) 30 min flushing with 0.5M NaCl at 0.5 L/min/m2
    c) 45 min flushing with tap or purified water at 0.5 L/min/m2
    3) Stabilisation procedure:
    a) Flush the stack including the membranes with feed water for 5-10 min
[6] Certified for a minimum daily flow of 605 liters per square meter.
[7] Conditioning Procedure:
    Membranes require preconditioning prior to usage. Both Anion and Cation Exchange
    membranes should be conditioned within 1 hour upon opening sealed bag.
    Each membrane should be immersed separately in 50°C tap or purified water at a ratio of
    4 liters per square meter of dry membrane. This should be repeated for seven days with
    50°C tap or purified water each time.
[8] Certified for a minimum daily flow of 740 liters per square meter.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] This product is Certified for a maximum use level of 125 mg/L.