NSF Product and Service Listings

[1] This product has been evaluated for use in Piping (Section 4) applications: 
    			
    Diameter:	Length:			
    1/8" - 5/16"	No Restriction			
    3/8"    270"			
    7/16"   230"			
    1/2"    200"			
    9/16"   180"			
    5/8"    160" 			
    11/16"  145" 			
    3/4"    135" 			
    13/16" - 2" 	No Restriction
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] Certified for hose assemblies in the following configurations: Stainless Steel CXC, CXE,
    Tri-clamp. All configurations of these hose assemblies are certified for a minimum
    length of 24 inches.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[2] This product has been evaluated for use in Piping (Section 4) applications with the
    following length restrictions:
    Diameter    Maximum Length
    1/8"        No Restriction
    3/16"       No Restriction
    1/4"        No Restriction
    5/16"       No Restriction
    3/8"        270"
    7/16"       230"
    1/2"        200"
    9/16"       180"
    5/8"        160"
    11/16"      145"
    3/4"        135"
    13/16"      No Restriction
    7/8"        No Restriction
    15/16"      No Restriction
    1"          No Restriction
    1 1/8"      No Restriction
    1 3/16"     No Restriction
    1 1/4"      No Restriction
    1 5/16"     No Restriction
    1 3/8"      No Restriction
    1 7/16"     No Restriction
    1 1/2"      No Restriction
    1 9/16"     No Restriction
    1 5/8"      No Restriction
    1 11/16"    No Restriction
    1 3/4"      No Restriction
    2"          No Restriction

[1] Trade name may feature prefix "E" to denote product sold in Europe.
[2] Suffix denotes color for the outermost layer. Color codes are:
    BK - Black
    BL - Blue
    W  - White
    G  - Light Grey
    GR - Green
    DG - Dark Grey
    R  - Red
[3] YYY denotes color for the outermost layer. Color codes are:
    BLK  - Black
    BLU  - Blue
    DGRY - Dark Gray
    GRN  - Green
    LGRY - Light Gray 
    RED  - Red
    WHT  - White
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] This tubing is Certified for the following diameters and lengths: 0.161 to 0.250"
    diameter, maximum length 175".
[2] This tubing is Certified for the following diameters and lengths: 0.251 to 0.500"
    diameter, maximum length 87".
[3] This tubing is Certified for the following diameters and lengths: 0.501 to 0.750"
    diameter, maximum length 58".
[4] This tubing is Certified for the following diameters and lengths: 0.751 to 1.000"
    diameter, maximum length 43".
[5] This tubing is Certified for the following diameters and lengths: 1.001 to 1.250"
    diameter, maximum length 35".

[1] This tubing is Certified for the following diameters and lengths: 0.161 to 0.250"
    diameter, maximum length 175".
[2] This tubing is Certified for the following diameters and lengths: 0.251 to 0.500"
    diameter, maximum length 87".
[3] This tubing is Certified for the following diameters and lengths: 0.501 to 0.750"
    diameter, maximum length 58".
[4] This tubing is Certified for the following diameters and lengths: 0.751 to 1.000"
    diameter, maximum length 43".
[5] This tubing is Certified for the following diameters and lengths: 1.001 to 1.250"
    diameter, maximum length 35".

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] Fitting packaging is coded by the following convention:
     X indicates packaging:
      0 - Bulk pack
      1 - Blister pack
      3 - Single bag
      5 - Flag tagged
[2] Fitting sizes are coded by the following convention:
     XX, YY, and ZZ indicate size:
      02 - 1/8"
      03 - 3/16"
      04 - 1/4"
      05 - 5/16"
      06 - 3/8"
      08 - 1/2"
      10 - 5/8"
      12 - 3/4"
      14 - 7/8"
      16 - 1"
      24 - 1.5"
      32 - 2"
      40 - 2.5"
      48 - 3"
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] The Angus Super Aquaduct is available in two colours:
    Sand (6" and greater)
    Blue (1" and greater)
[2] Only products bearing the NSF Mark on the product, product packaging, and/or
    documentation shipped with the product are Certified.
[3] The Angus Wellmaster is available in blue.

[1] 12X X-X -X-X-X -X-X -01, Metal Double lock Shower hose, Size:DN8, F1/2 x F1/2
    Note:
    1st X - Code for hose end use
            1 – Shower Hose
            0 – Other
    2nd & 3rd X - length (20 - 72 inches)
    4th X - Code for the hose color
            01 - Polish Stainless Steel hose
            02 - Chrome Plating Stainless Steel hose
            03 - PB Stainless Steel hose
            04 - BNP Stainless Steel hose
            05 - PVD Stainless Steel hose
            06 - Black Stainless Steel hose
            07 - White Stainless Steel hose
            08 - Copper Stainless Steel hose
            09 - Chrome Plating Brass hose
            10 - PB Brass hose
            11 - BNP Brass hose
            12 - PVD Brass hose
            13 - Black Brass hose
            14 - White Brass hose
            15 - Copper Brass hose
    5th X - Code for inlet
            1 - F1/2 Brass R-crossline nut
            2 - F1/2 Brass R-crossline nut (O-Ring)
            3 - F1/2 Brass R-hexagon nut
            4 - F1/2 Brass knurling nut
            5 - F1/2 Brass knurling nut (trapeziform)
            6 - F1/2 Brass straight-knurling nut
            7 - F1/2 Brass hexagon nut
    6th X - Code for outlet
            1 - F1/2 Brass R-crossline nut
            2 - F1/2 Brass R-crossline nut (O-Ring)
            3 - F1/2 Brass swivel R-crossline nut
            4 - F1/2 Brass swivel R-crossline nut (O-Ring)
            5 - F1/2 Brass knurling R-crossline nut
            6 - F1/2 Brass knurling swivel R-crossline nut
    7th X - Nut finish
            1 - Polish
            2 - Chrome Plating
            3 - PB
            4 - BNP
            5 - PVD
            6 - Black
            7 - White
            8 - Red-bronze
    8th X - Nipple material
            0 - Brass
            2 - Stainless Steel
[2] 137- X-X -X -X -X-X-X
    
    1st & 2nd X - Length (3.9 - 80in)
    
    3rd X - Code for the Finish
            02 - Grey
            04 - Black
    
    4th X - Code for fittings used
            01 - F1/2
            02 – F1/4
            03 - F3/4
            04 – F3/8
            05 - F5/8
            06 – F7/8
            07 – F7/8 Plastic Nut
            08 - F7/16
            09 – F9/16
            10 - F11/16
            11 - F15/16
            12 - F15/16 Plastic Nut
            13 - F1
            14 - F15
            15 - F16
            16 - F18
            17 - F3/8 ELBOW
            18 - F1/2 ELBOW
            19 - Ball Joint
            20 - M1/4
            21 - M3/4
            22 - M1/8
            23 - M3/8
            24 - M5/8
            25 - M7/8
            26 - M5/16
            27 - M9/16
            28 - M11/16
            29 - M13/16
            30 - M9/32
            31 - M8
            32 - M9
            33 - M10
            34 - M11
            35 - M12
            36 - M13
            37 - M14
            38 - M15
            39 - M20
            40 - M22
            41 - M23
            42 - 3-way connecter
            43 - F-quick connective
            44 - M-quick connective
            45 - M-quick connective Plastic
    
    5th X - Code for fittings used
            01 - F1/2
            02 – F1/4
            03 - F3/4
            04 – F3/8
            05 - F5/8
            06 – F7/8
            07 – F7/8 Plastic Nut
            08 - F7/16
            09 – F9/16
            10 - F11/16
            11 - F15/16
            12 - F15/16 Plastic Nut
            13 - F1
            14 - F15
            15 - F16
            16 - F18
            17 - F3/8 ELBOW
            18 - F1/2 ELBOW
            19 - Ball Joint
            20 - M1/4
            21 - M3/4
            22 - M1/8
            23 - M3/8
            24 - M5/8
            25 - M7/8
            26 - M5/16
            27 - M9/16
            28 - M11/16
            29 - M13/16
            30 - M9/32
            31 - M8
            32 - M9
            33 - M10
            34 - M11
            35 - M12
            36 - M13
            37 - M14
            38 - M15
            39 - M20
            40 - M22
            41 - M23
            42 - 3-way connecter
            43 - F-quick connective
            44 - M-quick connective
            45 - M-quick connective Plastic
    
    6th X - Code for DN
            0 - DN8
    
    7th X - Code for Package
[3] 138-X-X-X-X-X-X-X
    
    1st & 2nd X - Length (3.9 – 80inch)
    
    3rd X - Code for the Finish
            01 - Natural
            02 - Grey
            04 - Black
            14 - CP
            16 - BN
            25 - Nickel
            26 - SUS
            36 - Red
            37 - Blue
    
    4th and 5th X - Codes for fittings used
                    01 - F1/2
                    02 – F1/4
                    03 - F3/4
                    04 – F3/8
                    05 - F5/8
                    06 – F7/8 
                    07 – F7/8 Plastic Nut
                    08 - F7/16
                    09 – F9/16
                    10 - F11/16
                    11 - F15/16
                    12 - F15/16 Plastic Nut
                    13 - F1
                    14 - F15
                    15 - F16
                    16 - F18
                    17 - F3/8 ELBOW
                    18 - F1/2 ELBOW
                    19 - Ball Joint
                    20 - M1/4
                    21 - M3/4
                    22 - M1/8
                    23 - M3/8
                    24 - M5/8
                    25 - M7/8
                    26 - M5/16
                    27 - M9/16
                    28 - M11/16
                    29 - M13/16
                    30 - M9/32
                    31 - M8
                    32 - M9
                    33 - M10
                    34 - M11
                    35 - M12
                    36 - M13
                    37 - M14
                    38 - M15
                    39 - M20
                    40 - M22
                    41 - M23
                    42 - 3-way connecter
                    43 - F-quick connective
                    44 - M-quick connective
                    45 - M-quick connective Plastic
    
    6th X - Code for DN
            0 - DN8
            1 - DN6
    
    7th X - Code for Package
[4] 13X- X-X -X -X -X-01, Flexible hose / water connectors hose , Size:DN8,
    Note:
    1st X – Code for hose end use
            1 – Faucet Hose 
            2 – Drinking machine hose
            3 – Toilet supply line
            4 – Bason supply line
            5 – Shower hose
            6 – Ice maker supply line
            0 – Other
    2nd & 3rd X - Length (6 - 72 inches)
    4th X - Code for the Finish
            02 - Grey
            04 - Black
            26 - SUS
            36 - Red
            37 - Blue
    5th X - Code for fittings used
            01 - F1/2
            02 - F3/8
            03 - F3/4
            04 - F9/16(F3/8in.Comp)
            05 - F5/8
            06 - F15/16
            07 - F15/16 Plastic Nut
            08 - F7/8
            09 - F7/8 Plastic Nut
            10 - F1/2 ELBOW
            11 - F3/8 ELBOW
            12 - F1/4
            13 - F11/16
            14 - F7/16
            15 - F9/16
            16 - F1
            17 - M1/2
            18 - M3/8
            19 - M3/4
            20 - M9/16
            21 - M5/8
            22 - M5/16
            23 - M11/16
            24 - M13/16
            25 - M8
            26 - M9
            28 - M12
            29 - M15
            30 - M16
            31 - M23
            32 - M1/4
            33 - M1/8
            34 - M1
            35 - Quick Connective
            36 - Quick Connective Plastic
            37 - Ball Joint
    6th X - Code for fittings used
            01 - F1/2
            02 - F3/8
            03 - F3/4
            04 - F9/16(F3/8in.Comp)
            05 - F5/8
            06 - F15/16
            07 - F15/16 Plastic Nut 
            08 - F7/8
            09 - F7/8 Plastic Nut
            10 - F1/2 ELBOW
            11 - F3/8 ELBOW
            12 - F1/4
            13 - F11/16
            14 - F7/16
            15 - F9/16
            16 - F1
            17 - M1/2
            18 - M3/8
            19 - M3/4
            20 - M9/16
            21 - M5/8
            22 - M5/16
            23 - M11/16
            24 - M13/16
            25 - M8
            26 - M9
            27 - M10
            28 - M12
            29 - M15
            30 - M16
            31 - M23
            32 - M1/4
            33 - M1/8
            34 - M1
            35 - Quick Connective
            36 - Quick Connective Plastic
            37 - Ball Joint
[5] 14X- X-X -X-X-X -X-X-01, PVC Spiral hose , Size:DN8, F1/2 x F1/2
    Note :
    1st X - Code for hose end use
            1 – Shower Hose
            2 – Drinking machine hose
            3 – Toilet supply line
            4 – Bason supply line
            5 – Faucet hose
            6 – Ice maker supply line
            0 – Other
    2nd & 3rd X - length (20 - 72 inches)
    4th X - Hose color/description
            01 - chrome/black Concavo-convex hose
            02 - PB/black Concavo-convex hose
            03 - chrome/white Concavo-convex hose
            04 - PB/white Concavo-convex hose
            05 - white/white Concavo-convex hose
            06 - satin/nickel Concavo-convex hose
            07 - chrome/clear Concavo-convex hose
            08 - ORB Concavo-convex hose
            09 - white Reticulated hose
            10 - white/white Reticulated hose
            11 - deep gray Reticulated hose
            12 - silver gray Reticulated hose
            13 - black Reticulated hose
            14 - gold silver Reticulated hose
            15 - brown silver Reticulated hose
            16 - CP silver Reticulated hose
            17 - BNP silver Reticulated hose
            18 - chrome/black Silver hose
            19 - PB/black Silver hose
            20 - chrome/white Silver hose
            21 - PB/white Silver hose
            22 - chrome/clear Silver hose
            23 - PB/clear Silver hose
            24 - chrome/gray Silver hose
    5th X - Code for inlet
            1 - F1/2 Brass R-crossline nut
            2 - F1/2 ABS R-crossline nut
            3 - F1/2 Brass R-crossline nut (O-ring)
            4 - F1/2 Brass R-hexagon nut
            5 - F1/2 Brass knurlling nut
            6 - F1/2 Brass knurling nut (trapeziform)
            7 - F1/2 Brass straight-knurling nut
            8 - F1/2 Brass hexagon nut
            9 - M15 Brass nut
            0 - M9/16 Brass nut
    6th X - Code for outlet
            1 - F1/2 Brass R-crossline nut
            2 - F1/2 ABS R-crossline nut
            3 - F1/2 Brass R-crossline nut (O-ring)
            4 - F1/2 Brass swivel R-crossline nut
            5 - F1/2 Brass swivel R-crossline nut (O-ring)
            6 - F1/2 Brass knurling R-crossline nut 
            7 - F1/2 Brass knurling swivel R-crossline nut
    7th X - Code for the nut finish
            1 - Polish
            2 - Chrome Plating
            3 - PB
            4 - BNP
            5 - PVD
            6 - Black
            7 - White
            8 - Red-bronze
    8th X - Nipple material
            0 - Brass
            1 - POM
            2 - Stainless Steel
[6] 15X- X-X -X-X-X-01, PVC hose / Water Connector Hose
    Note :
    1st X - Code for hose end use
            1 – Faucet Hose
            2 – Drinking machine hose
            3 – Toilet supply line
            4 – Bason supply line
            5 – Shower hose
            6 – Ice maker supply line
            0 – Other
    2nd & 3rd X - Length (6 - 72 inches)
    4th X - Code for the Finish
            02 - Grey
            03 - Natural
            04 - Black
            05 - White
    5th X - Code for fittings used
            01 - F1/2
            02 - F3/8
            03 - F3/4
            04 - F9/16(F3/8in.Comp)
            05 - F5/8
            06 - F15/16
            07 - F15/16 Plastic Nut
            08 - F7/8
            09 - F7/8 Plastic Nut
            10 - F1/2 ELBOW
            11 - F3/8 ELBOW
            12 - F1/4
            13 - F11/16
            14 - F7/16
            15 - F9/16
            16 - F1
            17 - M1/2
            18 - M3/8
            19 - M3/4
            20 - M9/16
            21 - M5/8
            22 - M5/16
            23 - M11/16
[7] 15X- X-X -X-X-X-01, PVC hose / Water Connector Hose
    Note:
    5th X - Code for fittings used
    24 - M13/16
    25 - M8
    26 - M9
    27 – M10
    28 - M12
    29 - M15
    30 - M16
    31 - M23
    32 - M1/4
    3

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.
[Q] This product meets the reduced Q test statistic criteria of 1 µg or 0.5 µg for lead per
    Section 9.5.1.1 of NSF/ANSI/CAN 61.

[1] 1/8" x 1/8" x 1/8" - 6" x 6" x 4"
[2] 1 1/4" x 1 1/4" x 1" - 12" x 12" x 10"
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] This product does not require a Q statistic. It is made from material or materials that
    do not require lead analysis when reviewed per NSF/ANSI/CAN Standard 61, Section 3.3.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] NN - Non-braided tubing/hose
    NB - Braided tubing/hose
    (1)  Any 3 digit number between 041 and 381
    (2)  Any 3 digit number between 041 and 381
    (3)  3 letter code of the inner tubing (0A0, 0D0)
    (4)  3 letter code of the outer tubing (0A0, 0D0)
[2] This tubing is Certified for the following diameters and lengths:
    Up to 0.160" diameter, maximum length 83"
    0.161 to 0.250" diameter, maximum length 53"
    0.251 to 0.500" diameter, maximum length 26"
    0.501 to 0.750" diameter, maximum length 17"
    0.751 to 1.000" diameter, maximum length 13"

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] Use of this material may not be appropriate in all water chemistries. Copper [tube,
    pipe, or fitting] may require corrosion control to limit the leaching of copper into
    drinking water under certain water chemistries. Refer to Section I-1.1 of NSF/ANSI/CAN
    61 for the water quality considerations to be used before installing this product.
[2] Type L and M copper tube is Certified for sizes 1/4" and greater. 
    Type K copper tube is Certified for sizes 1/4" and greater.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] The last letter in the trade name refers to the color:
    B  - Blue
    BK - Black
    G  - Gray
    N  - Natural
    O  - Orange
    W  - White
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] Use of this material may not be appropriate in all water chemistries. Copper [tube,
    pipe, or fitting] may require corrosion control to limit the leaching of copper into
    drinking water under certain water chemistries. Refer to Section I-1.1 of NSF/ANSI/CAN
    61 for the water quality considerations to be used before installing this product.
[2] This product has not been evaluated for use in water main transmission piping but has
    been evaluated for use as water distribution piping in buildings.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] Certified for the following:
        2-layer skinned (Natural PEX – White PE) pipe: 3/8", 1/2", 5/8", 3/4" & 1"
        2-layer skinned (Natural PEX – Red, White or Blue PE) pipe 3/8", 1/2", 5/8", 3/4" &
    1"
[2] Certified for the following:
        2-layer skinned (Natural PEX – White PE) pipe: 3/8", 1/2", 5/8", 3/4" and 1"
        2-layer skinned (Natural PEX – Red, White or Blue PE) pipe: 3/8", 1/2", 5/8", 3/4"
    and 1"
        monowall red, white pipe: >= 1/8"
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[Q] This product meets the reduced Q test statistic criteria of 1 µg or 0.5 µg for lead per
    Section 9.5.1.1 of NSF/ANSI/CAN 61.

[1] Z - Special packaging
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] Z - Special packaging
[2] Optional exterior coating SANI-GUARD™.
[3] These models are NSF Certified faucet components.  The assembly of components does not
    constitute a NSF Certified faucet.  Complete faucet assemblies are NSF Certified only if
    the assembled faucet appears in NSF Listings.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.
[Q] This product meets the reduced Q test statistic criteria of 1 µg or 0.5 µg for lead per
    Section 9.5.1.1 of NSF/ANSI/CAN 61.
[25] x - Spray tip
         A - S/S spray tip (.61/.7/1.2)
         C - Brass spray tip (.61/.7/1.2)
         D - Brass spray tip (.61/.7/1.5)
     *Note: Pre-Rinse Spray Kit comes complete with grip and adapters to fit other
     manufacturer's hoses.
[26] x - Spray tip
         A - S/S spray tip (.61/.7/1.2)
         B - S/S spray tip (.61/.7/1.5)
         C - Brass spray tip (.61/.7/1.2)
         D - Brass spray tip (.61/.7/1.5)
     *Note: Pre-Rinse Spray Assembly comes with spray tips less grip and adapters.
[27] xxx - -12, -25, -45, -65, -74, 105 and 152
[28] The KL22-0010 Dipper Well Faucet Handle Repair Kit meets the reduced Q test statistic
     criteria of 0.5 µg for lead per Section 9.5.1.1 of NSF/ANSI/CAN 61.
[31] Includes locking stop valve assembly.

[1] Z - Special packaging

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] Z - Special packaging
[Q] This product meets the reduced Q test statistic criteria of 1 µg or 0.5 µg for lead per
    Section 9.5.1.1 of NSF/ANSI/CAN 61.

[Q] This product meets the reduced Q test statistic criteria of 1 µg or 0.5 µg for lead per
    Section 9.5.1.1 of NSF/ANSI/CAN 61.

[1] Z - Special packaging
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] Z - Special packaging
[3] Pre-Rinse Assemblies using Commercial Pre-rinse Hoses with Power Pulse spray assemblies
    will follow the format KCPnn-1xxx-yyyyy where:
    nn   - 50, 53, 56, 60, 63, 69, 71, 73 
    1    - 1 (Pre-Rinse)
    x2   - 0 (compression valve) 
           1 (ceramic valve)
    x3x4 - 00 (Standard - Default)
           L1 (.45 GPM Power Pulse spray)
           L2 (.65 GPM Power Pulse spray)
           L3 (.74 GPM Power Pulse spray)
           L4 (1.05 GPM Power Pulse spray)
    yyyyy - BR - w/ Wall Bracket
            (Blank) - w/o Wall Bracket
            AF1  - Add-on Faucet w/6” Spout
            AF2  - Add-on Faucet w/8” Spout
            AF3  - Add-on Faucet w/10” Spout
            AF4  - Add-on Faucet w/12” Spout
            AF5  - Add-on Faucet w/14” Spout
            AF6  - Add-on Faucet w/16” Spout
            AF7  - Add-on Faucet w/18” Spout
            MK   - Mounting Kit
            20   - 20" HOSE LENGTH  
            26   - 26" HOSE LENGTH  
            60   - 60" HOSE LENGTH  
            72   - 72" HOSE LENGTH  
            96   - 96" HOSE LENGTH  
            01 To 99  - Customer Code
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.
[Q] This product meets the reduced Q test statistic criteria of 1 µg or 0.5 µg for lead per
    Section 9.5.1.1 of NSF/ANSI/CAN 61.
[14] Optional exterior coating SANI-GUARD™.
[15] These models are NSF Certified faucet components.  The assembly of components does not
     constitute a NSF Certified faucet.  Complete faucet assemblies are NSF Certified only if
     the assembled faucet appears in NSF Listings.
[26] x - Spray tip
         A - S/S spray tip (.61/.7/1.2)
         C - Brass spray tip (.61/.7/1.2)
         D - Brass spray tip (.61/.7/1.5)
     *Note: Pre-Rinse Spray Kit comes complete with grip and adapters to fit other
     manufacturer's hoses.
[27] x - Spray tip
         A - S/S spray tip (.61/.7/1.2)
         B - S/S spray tip (.61/.7/1.5)
         C - Brass spray tip (.61/.7/1.2)
         D - Brass spray tip (.61/.7/1.5)
     *Note: Pre-Rinse Spray Assembly comes with spray tips less grip and adapters.
[28] xxx - -12, -25, -45, -65, -74, 105 and 152
[30] [32]
     BODY KXXX:
     KL51 = CP POLISHED LOW LEAD BRASS DOUBLE PANTRY FAUCET BODY
     KL54 = CP POLISHED LOW LEAD BRASS SPLASH MOUNT FAUCET BODY WITH ADJUSTABLE SPOUT OUTLET
     KL57 = CP POLISHED LOW LEAD BRASS ELEVATED BRIDGE DECK MOUNT BODY WITH ADJUSTABLE SPOUT
     OUTLET
     KL61 = CP POLISHED LOW LEAD BRASS ELEVATED BRIDGE DECK MOUNT BODY WITH ADJUSTABLE SPOUT
     OUTLET
     KL64 = CP POLISHED LOW LEAD BRASS SINGLE PANTRY FAUCET BODY
     KL67 = CP POLISHED LOW LEAD BRASS ELEVATED BRIDGE DECK MOUNT BODY WITH ADJUSTABLE SPOUT
     OUTLET
     KL70 = CP POLISHED LOW LEAD BRASS SINGLE PANTRY BODY
     KL72 = CP POLISHED LOW LEAD BRASS SINGLE HOLE BASE
     KL74 = CP POLISHED LOW LEAD BRASS SINGLE HOLE BASE
     KL76 = CP POLISHED LOW LEAD BRASS WOK RANGE SPLASH MOUNT FAUCET
     
     1st X INLET:
     4 = 4” (102mm) CTR – ½”NPSM INTEGRAL CAST INLETS
     6 = 6” (152mm) CTR – ½”NPSM INTEGRAL CAST INLETS
     7 = 1/2” (13mm) OFFSET SUPPLY INLETS – KL60-Y004
     8 = 8” (203mm) CTR – ½”NPSM INTEGRAL CAST INLETS, STANDARD SUPPLY INLETS,  – KL60-Y006
     9 = SINGLE ½”NPSM INTEGRAL CAST INLETS
     
     2nd X VALVE:
     0 = 1/4 TURN STANDARD ENCORE® COMPRESSION VALVE W/BUILT IN CHECK
     1 = 1/4 TURN CERAMIC VALVE W/ INLINE CHECK VALVE
     2 = SELF CLOSING ADJUSTABLE METERING VALVE
     
     3rd and 4th X SPOUT:
     00 = 3-1/2” (89mm) GOOSENECK
     01 = 8-1/2” (216mm) GOOSENECK
     02 = 6” (152mm) GOOSENECK
     06 = 6” (152mm) TUBULAR OR CAST SWING SPOUT
     08 = 8” (203mm) TUBULAR SWING SPOUT
     10 = 10” (254mm) TUBULAR SWING SPOUT
     12 = 12” (305mm) TUBULAR SWING SPOUT
     14 = 14” (356mm) TUBULAR SWING SPOUT
     16 = 16” (406mm) TUBULAR SWING SPOUT
     18A = 18” (457mm) TUBULAR SWING SPOUT
     18 = 18” (457mm) DOUBLE JOINTED SWING SPOUT
     24 = 24” (609mm) DOUBLE JOINTED SWING SPOUT
     
     1st Y SPOUT STYLE:
     S = ADJUSTABLE SPOUT
     R = RIGID TUBULAR SPOUT
     T = CAST TUBULAR SPOUT (6” OR 8” ONLY)
     
     2nd Y AERATOR:
     A = 0.5 GPM PCA SPRAY VANDAL RESISTANT
     B = 1.5 GPM MAX LAMINAR VANDAL RESISTANT
     C = 0.5 GPM PCA SPRAY
     D = 1.5 GPM MAX LAMINAR
     E = 2.2 GPM MAX AERATED STREAM
     F = 2.2 GPM MAX AERATED STREAM VANDAL RESISTANT
     G = .35 GPM PCA SPRAY (MALE)
     H = 2.2 GPM MAX AERATED STREAM VANDAL & HOSE RESISTANT
     J = .35 GPM PCA SPRAY
     K = .35 GPM PCA SPRAY (MALE) VANDAL RESISTANT
     L = .35 GPM PCA SPRAY VANDAL RESISTANT
     M = 1.0 GPM PCA LAMINAR FLOW
     S = 6.0 GPM MAX WIDE ROSE SPRAY
     
     3rd Y HANDLE:
     1 = STANDARD ENCORE® LEVER
     2 = CROSS
     4 = 4” (102mm) WRIST BLADE
     5 = STANDARD LEVER W/TAMPER PROOF SCREW
     6 = 6” (152mm) WRIST BLADE
     7 = 4” (102mm) WRIST BLADE W/ TAMPER PROOF SCREW
     8 = 6” (152mm) WRIST BLADE W/TAMPER PROOF SCREW
[31] Product Name: KL74-X0XX-XX, where:
     KL74: Chrome Plated single hole deck mount base
     First X: Inlet: 9 – Single 1/2” cast inlets
     Second and third X: Spout:
     00 - 3 1/2” Gooseneck
     01 - 8 ½” Gooseneck
     02 - 6” Gooseneck
     06 - 6” Tubular Swing Spout
     08 - 8” Tubular Swing spout
     10 - 10” Tubular Swing spout
     12 - 12” Tubular Swing spout
     14 - 14” Tubular Swing spout
     16 - 16” Tubular Swing spout
     18 - 18” Double jointed swing spout
     18A - 18” Tubular Swing spout
     24 - 24” Double jointed swint spout
     Fourth X: Spout Style, where
     X - Adjustable Spout
     R - Rigid Tubular Spout
     Fifth X: Aerator, where
     A - 0.5 GPM PCA Spray vandal resistant
     B - 1.5 GPM max laminar vandal resistant
     C - 0.5 GPM PCA Spray
     D - 1.5 GPM max laminar
     E - 2.2 GPM Max Aerated stream
     F - 2.2 GPM max aerated stream vandal resistant
     H - 2.2 GPM Max aerated stream vandal and hose resistant
     J - 0.35 GPM PCA Spray
     L - 0.35 GPM PCA Spray vandal resistant
     M - 1.0 GPM PCA Laminar Flow
     S - 6.0 GPM MAX wide rose spray
     Optional - Z suffix denotes special packaging as an option
[32] Includes locking stop valve assembly.

[1] Z - Special packaging

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] Z - Special packaging
[Q] This product meets the reduced Q test statistic criteria of 1 µg or 0.5 µg for lead per
    Section 9.5.1.1 of NSF/ANSI/CAN 61.

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] Copper tube (Alloy C12200) is Certified by NSF to NSF/ANSI/CAN 61 for use in drinking
    water supplies of pH 6.5 and above.  Drinking water supplies that are less than pH 6.5
    may require corrosion control to limit leaching of copper into the drinking water.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] XX indicates internal diameter size in inches:
    04 - 0.255 ID
    06 - 0.385 ID
    08 - 0.502 ID
    10 - 0.635 ID
    12 - 0.745 ID
    16 - 1.01 ID
[2] For Synflex Flavor Shield 37FS-XXYY and Synflex Flavor Shield 38FS-XXYY, 
    
    XX indicates internal diameter size in inches: 
    30 - 0.265 ID, 0.465 OD 
    31 - 0.265 ID, 0.420 OD 
    41 - 0.380 ID, 0.535 OD 
    42 - 0.380 ID, 0.597 OD 
    61 - 0.510 ID, 0.675 OD 
    
    YY indicates color: 
    00 - Natural 
    01 - Number Code on Hose
    21 - Blue 
    22 - Black 
    23 - Red 
    24 - Green 
    25 - Yellow 
    26 - Orange 
    27 - Brown 
    28 - White 
    29 - Pink 
    30 - Violet 
    31 - Gray 
    32 - Tan
    33 - Black core, gray jacket
[3] For Synflex Flavor Shield 42FS-XXYY, 
    
    XX indicates internal diameter size in inches: 
    01 - 0.073 ID, 0.140 OD 
    02 - 0.090 ID, 0.140 OD 
    03 - 0.125 ID, 0.188 OD 
    04 - 0.194 ID, 0.250 OD  
    06 - 0.265 ID, 0.375 OD 
    07 - 0.315 ID, 0.437 OD
    08 - 0.380 ID, 0.500 OD 
    10 - 0.510 ID, 0.625 OD 
    12 - 0.510 ID, 0.730 OD 
    13 - 0.510 ID, 0.688 OD 
    
    YY indicates color: 
    00 - Natural
    01 - # Coded
    20 - Blue 
    21 - Black 
    22 - Red 
    23 - Green 
    24 - Yellow 
    25 - Orange 
    26 - Brown 
    27 - White 
    28 - Pink 
    29 - Violet 
    30 - Gray 
    31 - Tan 
    32 - Light Blue 
    33 - Light Green
    50 - Yellow Tint
    51 - Blue Tint
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[8] DPE - Trade name
    OD - Outer diameter
         01 - 5/32"
         03 - 3/16"
         04 - 1/4"
         05 - 5/16"
         06 - 3/8"
         07 - 1/2"
         04M - 4mm
         06M - 6mm
         08M - 8mm
         10M - 10mm
         12M - 12mm
         15M - 15mm
    CO - Color
         BK  - Black
         BL  - Blue
         GN  - Green
         GR  - Gray     
         IBK - Black
         NA  - Natural
         OR  - Orange
         RE  - Red
         WT  - White
         YE  - Yellow
    RL - Reel length (meters)
         0100 - 100 m
         0150 - 150 m
         0200 - 200 m
         0300 - 300 m
         0400 - 400 m
         0500 - 500 m
         1000 - 1000 m
         1500 - 1500 m
    Certified for the maximum length for each diameter:
    Outer diameter:       Inner diameter:       Length:
    5/16"                 .187"                 7.8 m
    3/8"                  1/4"                  5.8 m
    1/2"                  3/8"                  3.9 m
    8mm                   6mm                   6.2 m
    10mm                  7mm                   5.3 m
    12mm                  9mm                   4.1 m
    15mm                  11.5mm                3.2 m
[9] Certified for blue or white tubing.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] This copper alloy is Certified by NSF to NSF/ANSI/CAN 61 for use in drinking water
    supplies of pH 6.5 and above. Drinking water supplies that are less than pH 6.5 may
    require corrosion control to limit leaching of copper into the drinking water.
[2] Certified Sizes Include:
    
        4703 CXF ADAPT
        3"
        4"
        3/4" x 3/8"
        1"x 1 1/2"
        1 1/4" x 3/4"
    
        4707 CxC 90 ELBOW
         1 1/4" x 3/4"
         1 1/2" x 3/4"
        1 1/2" x 1"
        
        4707-3 CXF 90 EL
            1/2"
            1" – 2"   
            1/2" x 3/8"     
            1/2" x 3/4"
            3/4" X 1"
            1" x 1/2"
            1" x 3/4"
    
        4707-3-5 CXF 90 DROP EAR EL 
            3/8"
            1/2"
            1"
            3/4" x 1/2"
    
        4710-3 FXFXC TEE
            3/4" x 1/2" x 1/2"
            3/4" x 1/2" x 3/4"
        
        4712 CXCXF TEE
            3/8"
            1/2"
            3/4"
            1"
            1/2" x 1/2" x 1/8" 
            1/2" x 1/2" x 1/4"
            1/2" x 1/2" x 3/4"
            3/4" x 3/4" x 1/2"
            1" x 1" x 1/2" 
            1"x 1" x 3/4"
            1 1/4" x 1 1/4" x 1/2"
            1 1/4" x 1 1/4" x 3/4"
            1 1/2" x 1 1/2" x 1/2"
            1 1/2" x 1 1/2" x 3/4"
            2" x 2" x 1/2"
            2" x 2" x 3/4"
    
        4714 CXFXC TEE
            1/2"
            3/4"
            3/4" x 1/2" x 3/4"
            1" x 1/2" x 1"
            1" x 3/4" x 1"
            1 1/2" x 3/4" x 1 1/2"
    
        4714-B CXFXC TEE
            1/2" x 1/8" x 1/2"
            1" x 1/8" x 1"
        
         4733 CXC UNION
         1/2"
         3/4"
         1" - 3"
    
         47073 CXF 90 EL
          1/2"
          3/4"
          3/4" x 1/2"
    
          470735 CXF 90 DROP EAR EL
           1/2"
           3/4"
           1/2 x 3/8"
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] Copper Tube (Alloy C 12200) is Certified by NSF to NSF/ANSI/CAN 61 for use in drinking
    water supplies of pH 6.5 and above.  Drinking water supplies which are less than pH 6.5
    may require corrosion control to limit leaching of copper into the drinking water.
[2] Only products bearing the NSF Mark on the product, product packaging, and/or
    documentation shipped with the product are Certified.

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[3] Models that have an inner diameter of 10 mm (DN10)
    DN10K, DN10S
    Fittings: F1/2, F3/8, F9/16, F 1/2NPSM, F3/4, F3/4NPSM, F3/4NH 
    DN10KL, DN10KZ, DN10SL
    Fittings: F1/2, F3/8, F9/16, F1/2NPSM, F3/4, F3/4NPSM, F3/4NH, M1/2NPT
[4] Models that have an inner diameter of 12.5 mm (DN13)
    Fittings: F1/2, F1/2NPSM, F3/4, F3/4NPSM, F3/4NH
[5] Connectors have an inner diameter of 6 mm (DN6)
    DN6K, DN6S, DN6X , DN6X(R)
    Fittings: F ½ c/gom, F15x1, F3/8, F3/8 c/gom, FIP ½, O9.5 C.O. compression, 010 C.O.
    compression, 010 C.G. compression, 15x1 Male, FC1/2 Female, FM1/4 NPSM Female, F1/2
    Female, Cod. ½(xFC1/2), F9/16 c/gom Female, 8x1C Male, 10x1C Male, 12x1P Male,
    14x1Male, F14x1 Female, 15x1Gir
    
    DN6KL, DN6KZ, DN6SL, DN6XL, DN6XL(R), DN6XZ, DN6XZ(R), P6KL, P6KZ, P6SL
    Fittings: 8x0,75 HR Male, T8, M1/2, F3/8 Bend, F1/2 Bend, F15x1, F3/8, F3/4 NH c/gom,
    F3/8 c/gom, FIP ½, M1/2 NPT, T10 “Tube”, ½, O9.5 C.O. compression, 010 C.O.
    compression, 010 C.G. compression, 15x1 Male, FC1/2 Female, FM1/4 NPSM, FCAM ½ Female,
    FCA ½ Female, F1/2 Female, Cod. ½ (xFC1/2), Cod. 1/2GIR (XFCA1/2), F9/16 Female, F9/16
    Female c/gom, 8x1C Male, 8x1L Male, 10x1C Male, 10x1L Male, 10x1 LAV Male, 11x1CC
    Male, 11x1Z Male, 12x1P Male, 14x1 Male, 15x1V Male, 15x1Gir Male, M3/8, IRF + IRB*,
    F1/2 c/gom, F14x1 Female
    
    P6K, P6S
    Fittings: F1/2 c/gom, F15x1, F3/8, F3/8 c/gom, FIP ½, O9.5 C.O. compression, 010
    C.O. compression, 010 C.G. compression, 15x1 Male, FC1/2 Female, FM1/4 NPSM, FCAM ½
    Female, FCA ½ Female, F1/2 Female, Cod. ½ (xFC1/2), Cod. 1/2GIR (XFCA1/2), F9/16
    Female, F9/16 Female c/gom, 8x1C Male,10x1C Male, 11x1CC Male, 11x1Z Male, 12x1P
    Male, 14x1 Male, F14x1 Female, 15x1V Male, 15x1Gir Male, M3/8, IRF + IRB*
    
    *Note: Connectors combined using the IRF + IRB connection fitting must remain within
    the listed minimum and maximum length restrictions.
[6] Connectors have an inner diameter of 8 mm (DN8)
    
    DN8K, DN8S, DN8X
    Fittings: F ½ c/gom, F15x1, F3/8, F3/8 c/gom, FIP ½, O9.5 C.O. compression, 010 C.O.
    compression, 010 C.G. compression, 15x1 Male, FC1/2, FM1/4 NSPM Female, FCAM ½ Female,
    FCA ½ Female, F1/2 Female, Cod. ½ (xFC1/2), Cod. 1/2GIR (XFCA1/2), T8, F9/16 Female,
    F9/16 c/gom Female, 8x1C Male, 10x1C Male, 11x1CC Male, 11x1Z male, 12x1P Male, 14x1
    Male, F14x1 Female, 15x1Gir Male
    
    DN8KL, DN8KZ, DN8SL, DN8XL, DN8XZ, DPV8KL, DPV8KZ, DPV8SL, P9KL, P9KZ, P9SL
    Fittings: 10x1 HR Male, M1/2, NPB ½ Male, F3/8 Bend, F1/2 Bend, F1/2 c/gom, F15x1,
    F3/8, F3/4 NH C/gom, F3/8 c/gom, FIP ½, M ½ NPT, T8, T10 “Tube”, O9.5 C.O.
    compression, 010 C.O. compression, 010 C.G. compression, 15x1 Male, FC1/2, FM1/4 NSPM
    Female, FCAM ½ Female, FCA ½ Female, F1/2 Female, Cod. ½ (xFC1/2), Cod. 1/2GIR
    (XFCA1/2), F9/16 Female, F9/16 c/gom Female, 10x1C Male, 10x1L Male, 10x1 LAV (not to
    be used with 10x1L Male), 11x1CC Male, 11x1Z, 12x1P, 14x1 Male, F14x1 Female, 15x1V
    Male, 15x1Gir, T 9.5, M3/8, IRF + IRB*
    
    DPV8K, DPV8S, P9K, P9S
    Fittings: F1/2 c/gom, F15x1, F3/8, F3/8 c/gom, FIP ½, O9.5 C.O. compression, 010
    C.O. compression, 010 C.G. compression, 15x1 Male, FC1/2, FM1/4 NSPM Female, FCAM ½
    Female, FCA ½ Female, F1/2 Female, Cod. ½ (xFC1/2), Cod. 1/2GIR (XFCA1/2), T8, F9/16
    Female, F9/16 c/gom, 8x1C Male, 10x1C Male, 11x1CC Male, 11x1Z Male, 12x1P Male, 14x1
    Male, F14x1 Female, 15x1V Male, 15x1Gir Male, M3/8, IRF + IRB*
    
    *Note: Connectors combined using the IRF + IRB connection fitting must remain within
    the listed minimum and maximum length restrictions

[1] All products have trade names that contain the following descriptors that appear in the
    following order ABCDEF:
    
    A. External Covering:
    DN – Stainless Steel Braiding
    DPV – Stainless Steel Braiding with rubber coating
    P - Nylon
    DN BCD (R) - (R) suffix models use external covering of Nylon OR Stainless Steel
    B. Internal Diameters:
    6 - DN6
    8 – DN8
    9 – DN8
    10 – DN10
    13 – DN13
    
    C. Inliner Material:
    K - Silicone
    S - EPDM
    X – PE
    
    D. End Connection Material Type: Blank, L, or Z
    
    E. Fittings:
    Fitting options as follows: see [2] [3] [4] [5]
[2] F. Length
    Maximum Length Restrictions are as follows:
    Flexible Connector Hose models made with material K:
    DN6 – 2500 mm (98 in)
    DN8 – 2032 mm (80 in)
    DN10 – 1600 mm (63 in)
    DN13 – 1250 mm or (49 in)
        
    Flexible Connector Hose models made with material S:
    DN6 – 2032mm (80 in)
    DN8 – 1524mm (60 in)
    DN10 – 1194 mm (47 in)
    DN13 – 914 mm (36 in)
       
    Flexible Hose models made with material X:
    DN6 – 2032mm (80 in)
    DN8 – 1524mm (60 in)
       
    Minimum Length Restrictions:
    All trade names, except those ending in L or Z, are subject to the following minimum
    length restrictions:
    DN6 - 459 mm (18 in)
    DN8 - 440 mm (17.3 in)
    P6 - 764 mm (30 in)
    P9, DPV8 - 573 mm (22.5 in)
    DN10, DN13 - 320 mm (12.6 in)
         
    Models using end connections with L or Z in the name do not have minimum length
    restrictions.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.
[Q] This product meets the reduced Q test statistic criteria of 1 µg or 0.5 µg for lead per
    Section 9.5.1.1 of NSF/ANSI/CAN 61.

[1] Only products bearing the NSF Mark on the product, product packaging, and/or
    documentation shipped with the product are Certified.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

* Trade name may include the following:
  CB  - Custom Bag
  BG# - Bag (with # of fittings in bag)

[1] Certified for the following:		
    2-layer skinned (Natural PEX – White PE) pipe: 3/8", 1/2", 5/8",3/4" & 1"		
    2-layer skinned (Natural PEX – Red, White or Blue PE) pipe  3/8", 1/2", 5/8",3/4" & 1"
[2] Certified for the following:		
    2-layer skinned (Natural PEX – White PE) pipe: 3/8", 1/2", 5/8", 3/4" and 1"		
    2-layer skinned (Natural PEX – Red, White or Blue PE) pipe: 3/8", 1/2", 5/8", 3/4" and
    1" monowall red, white pipe: >= 1/8"
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] Certified for the following colors: natural, red, white, blue, black, green, yellow, and
    orange.

[1] X in Trade Name denotes length from 500mm - 3000mm.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.
[Q] This product meets the reduced Q test statistic criteria of 1 µg or 0.5 µg for lead per
    Section 9.5.1.1 of NSF/ANSI/CAN 61.

[1] Certified for the following:
        2-layer skinned (Natural PEX – White PE) pipe: 3/8", 1/2", 5/8",3/4" & 1"
        2-layer skinned (Natural PEX – Red, White or Blue PE) pipe  3/8", 1/2", 5/8",3/4" &
    1"
[2] [2] Certified for the following:
        2-layer skinned (Natural PEX – White PE) pipe: 3/8", 1/2", 5/8", 3/4" and 1"
        2-layer skinned (Natural PEX – Red, White or Blue PE) pipe: 3/8", 1/2", 5/8", 3/4"
    and 1"
        monowall red, white pipe: >= 1/8"
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[4] Certified for Natural non-barrier single layer tubing for 1/8" - 3" sizes. Certified for
    red, white, blue 2-layer tubing for 1/2", 5/8", 3/4", 1" sizes only. Certified for red,
    white, blue 3-layer tubing for 1/2", 5/8", 3/4", 1" sizes only.
[6] Certified for the following:
    2-layer skinned (Natural PEX – White PE) pipe: 3/8", 1/2", 5/8",3/4" & 1"
    2-layer skinned (Natural PEX – Red, White or Blue PE) pipe  3/8", 1/2", 5/8",3/4" & 1"
[7] Certified for the following:
    2-layer skinned (Natural PEX – White PE) pipe: 3/8", 1/2", 5/8", 3/4" and 1"
    2-layer skinned (Natural PEX – Red, White or Blue PE) pipe: 3/8", 1/2", 5/8", 3/4" and
    1"
    monowall red, white pipe: >= 1/8"
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] NB - Braided tubing/hose
    NN - Non-braided tubing/hose
    (1)  Any 3-digit number between 041 and 381
    (2)  Any 3-digit number between 041 and 381
    (3)  3-letter code of the inner tubing (0A0, 0D0)
    (4)  3-letter code of the outer tubing (0A0, 0D0)
[2] This tubing is Certified for the following diameters and lengths:
    Up to 0.160" diameter, maximum length 274"
    0.161 to 0.250" diameter, maximum length 175" 
    0.251 to 0.500" diameter, maximum length 87" 
    0.501 to 0.750" diameter, maximum length 58" 
    0.751 to 1.000" diameter, maximum length 43" 
    1.001 to 1.250" diameter, maximum length 35" 
    1.251 to 1.500" diameter, maximum length 29"
[3] This product does not require a Q statistic. It is made from material or materials that
    do not require lead analysis when reviewed per NSF/ANSI/CAN Standard 61, Section 3.3. 
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] NN - Non-braided tubing/hose
    NB - Braided tubing/hose
    (1)  Any 3 digit number between 041 and 381
    (2)  Any 3 digit number between 041 and 381
    (3)  3 letter code of the inner tubing (0A0, 0D0)
    (4)  3 letter code of the outer tubing (0A0, 0D0)
[2] This tubing is Certified for the following diameters and lengths:
    Up to 0.160" diameter, maximum length 83"
    0.161 to 0.250" diameter, maximum length 53"
    0.251 to 0.500" diameter, maximum length 26"
    0.501 to 0.750" diameter, maximum length 17"
    0.751 to 1.000" diameter, maximum length 13"

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] Certified for a component of a Mechanical Plumbing Device not to exceed a surface area
    to volume ratio of 120 sq. in./L.
[2] Certified colors include black, clear, clear blue, gray, orange, and white.
[3] This product does not require a Q statistic.  It is made from material or materials that
    do not require lead analysis when reviewed per NSF/ANSI/CAN Standard 61, Section 3.3.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] The length is the maximum for that diameter.
      Diameter 1/16"      Length 430"           Diameter 3/4"       Length 36"
      Diameter 1/8"       Length 215"           Diameter 7/8"       Length 30"
      Diameter 3/16"      Length 140"           Diameter 1"         Length 27"
      Diameter 1/4"       Length 105"           Diameter 1-1/8"     Length 24"
      Diameter 5/16"      Length 85"            Diameter 1-1/4"     Length 21"
      Diameter 3/8"       Length 70"            Diameter 1-3/8"     Length 19"
      Diameter 7/16"      Length 60"            Diameter 1-1/2"     Length 18"
      Diameter 1/2"       Length 50"            Diameter 1-5/8"     Length 16"
      Diameter 9/16"      Length 45"            Diameter 1-3/4"     Length 15"
      Diameter 5/8"       Length 40"            Diameter 1-7/8"     Length 14"
      Diameter 11/16"     Length 39"            Diameter 2"         Length 13"
    
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] The "K" prefix is optional for all model numbers and may not appear on product
    packaging. All models may also have a REC, EC, P, R, H, S, B, N, A, L or T prefix. Model
    numbers may also be provided with suffixes indicating handle type, flow rate, flow type,
    and/or other feature options; and will have a suffix indicating finish option.
[2] These models are NSF Certified faucet components.  The assembly of components do not
    constitute a NSF Certified faucet.  Complete faucet assemblies are NSF Certified only if
    the assembled faucet appears in NSF Listings.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.
[Q] This product meets the reduced Q test statistic criteria of 1 µg or 0.5 µg for lead per
    Section 9.5.1.1 of NSF/ANSI/CAN 61.

[1] Trade names may feature prefix "E" to denote products sold in Europe.
[2] Suffix X - Exterior color designation.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] N, W, B, O, G, and K in the trade name indicate Natural, White, Blue, Orange, Gray, and
    Black respectively.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.