NSF Product and Service Listings

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] For all meters:
    X - Type of electronics	
        4 - AquaMaster	
        5 - WaterMaster
        6 - ProcessMaster		
    Y - Tier of Electronics	
        1 - Standard Electronics
        2 - Enhanced Electronic
        3 - Advanced Electronics	
        5 - Premium Electronics	
    Z - Type of mounting	
        1 - Integral with transmitter
        2 - Remote with transmitter (Sensor + Transmitter)
        8 - Sensor only	
    Type of bore and liner	
        F - FEF/Full bore/Rubber liner
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] For all meters:
    X - Type of electronics
    4 - AquaMaster
    5 - WaterMaster
    6 - ProcessMaster
    Y - Tier of Electronics
    1 - Standard Electronics
    2 - Enhanced Electronics
    3 - Advanced Electronics
    5 - Premium Electronics
    Z - Type of mounting
    1 - Integral with transmitter
    2 - Remote with transmitter (Sensor + Transmitter)
    8 - Sensor only
    Type of bore and liner
    F - FEF/Full bore/Rubber liner

[2] For all meters:
    X - Type of electronics
        4 - AquaMaster
        5 - WaterMaster
        6 - ProcessMaster
    Y - Tier of Electronics
        1 - Standard Electronics
        2 - Enhanced Electronic
        3 - Advanced Electronics
        5 - Premium Electronics
    Z - Type of mounting
        1 - Integral with transmitter
        2 - Remote with transmitter (Sensor + Transmitter)
        8 - Sensor only
    Type of bore and liner:
    F - FEF/Full bore/Rubber liner
[3] For all meters:
        X - Type of electronics
            4 - AquaMaster
            5 - WaterMaster
        Y - Tier of Electronics
            1 - Standard Electronics
            2 - Enhanced Electronics
            3 - Advanced Electronics
            5 - Premium Electronics
        Z - Type of mounting
              1 - Integral with transmitter			
            2 - Remote with transmitter (Sensor + Transmitter)			
            8 – Sensor Only			
    
    Type of bore and liner:
    V – FEV/Optimized bore/PP liner
[4] For all meters:
        X - Type of electronics
            4 - AquaMaster
            5 - WaterMaster
        Y - Tier of Electronics
            1 - Standard Electronics
            2 - Enhanced Electronics
            3 - Advanced Electronics
            5 - Premium Electronics
        Z - Type of mounting
            1 - Integral with transmitter
            2 - Remote with transmitter (Sensor + Transmitter)
            8 – Sensor Only
    
        Type of bore and liner:
        F - FEF/Full bore/Rubber liner
        R - FER/Reduced bore/Rubber liner
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[3] The Certified Octave Stainless Steel Ultrasonic Water Meters include the following sizes
    and end connections:
    1.5" x 13" S.St MM Fixed Oval Flanges
    1.5" x 10" S.St MM Fixed Oval Flanges
    1.5" x 12.625" S.St MM NPT
    2" x 10" S.St MM Fixed Oval Flanges
    2" x 15.25" S.St MM Fixed Oval Flanges
    2" x 17" S.St MM Fixed Oval Flanges
    2" x 15.25" S.St MM Fixed Oval NPT
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] Product also complies with NSF/ANSI 372.
[2] E-Series G2 Ultrasonic Meter & Dynasonics® U500W:		
    5/8" x 7-1/2"	
    5/8" x 3/4" x 7-1/2"	
    3/4" x 7-1/2"
    3/4" x 9"		
    3/4" x 1" x 9"		
    1" x 10-1/4"
[3] Dynasonics® U500W Ultrasonic Meters
    2" x 10"
    2" x 17"
    3" x 17"
    3" x 12"
    4" x 20"
    4" x 14"
    6" x 18"
    6" x 24"
    8" x 20"
    10"
    12"
[4] E-Series® & Dynasonics® U500W
    1 1/2" x 12 5/8"
    1 1/2" x 13"
    2" x 15 1/4"
    2" x 17"
    
    E-Series® only
    1 1/2" x 300mm (DN40)
    1 1/2" x 330mm (DN40)
    2" (DN50)
[5] 5/8" x 3/4" x 7 1/2"
    3/4" x 7 1/2"
    3/4" x 9"
[6] Certification of the E-Series® Ultrasonic Plus (valve ready) covers the unmodified water
    meter only. Certification does not include meters that have been retrofitted
[7] FSAA-01 Water Meters are Certified for the following sizes and configurations: 
    FSAA-01 w/ 2" LL turbo meter bypass (4-10, 10 x 12 in.)  
    FSAA-01 w/ 1" M70 LL disc meter bypass (4-6 in.) 
    FSAA-01 w/ 1.5" M170 LL disc meter bypass (6 in.) 
    FSAA-01 w/ 2" M170 LL disc meter bypass (6-10, x 10 x 12 in.)
[8] M25 PN is Certified in the following sizes:
    5/8" x 7 1/2"
    5/8" x 3/4" x 7 1/2"
    3/4" x 9”
[9] M25 LL is Certified for the following sizes:	
    5/8" x 3/4" x 7 1/2"	
    5/8" x 7 1/2"	
    	
    M35 LL is Certified for the following sizes:	
    3/4" x 7 1/2"	
    3/4" x 9"	
    	
    M55 LL is Certified for the following size:	
    1" x 10 3/4"	
    	
    M70 LL is Certified for the following size:	
    1" x 10 3/4"
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.
[10] E-Series G2 Ultrasonic Meter:
     1.5" x 12.625"
     1.5" x 13"
     2" x 10"
     2" x 15.25"
     2" x 17"
     3'' x 17''
     3'' x 12''
     4'' x 20''
     4'' x 14''
     6" x 24"
     6" x 18"
     8" x 20"
     10"
     12"
[11] Complies with US EPA Maximum Contaminant Levels (MCLs) for PFAS according to
     NSF/ANSI/CAN 61.

[2] E-Series G2 Ultrasonic Meter & Dynasonics® U500W: 
    5/8" x 7 1/2"  
    5/8" x 3/4" x 7 1/2" 
    3/4" x 7 1/2"
    3/4" x 9"
    3/4" x 1" x 9"
    1" x 10 1/4"
[3] M25 LL is Certified for the following sizes: 
    5/8" x 3/4" x 7 1/2" 
    5/8" x 7 1/2" 
[4] M35 LL is Certified for the following sizes:
    3/4" x 7 1/2"
    3/4" x 9"
[5] M55 LL is Certified for the following size:
    1" x 10 3/4"
[6] M70 LL is Certified for the following size:
    1" x 10 3/4"
[7] E- Series G2 Ultrasonic Meter & Dynasonics® U500W:
    DN15 x 110 mm
    DN15 x 114 mm
    DN15 x 165 mm
    DN20 x 190 mm
    DN25 x 260 mm
[9] Complies with US EPA Maximum Contaminant Levels (MCLs) for PFAS according to
    NSF/ANSI/CAN 61.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] Product also complies with NSF/ANSI 372.
[2] 5/8" x 3/4" x 7-1/2"
    3/4" x 7-1/2"
    3/4" x 9"
[3] E-Series G-2 Ultrasonic Meter & Dynasonics® U500W:
    DN15 x 110 mm
    DN15 x 114 mm
    DN15 x 165 mm
    DN20 x 190 mm
    DN25 x 260 mm
[4] E-Series G2® Ultrasonic Meter & Dynasonics® U500W:
    5/8" x 7 1/2"
    5/8" x 3/4" x 7 1/2"
    3/4" x 7 1/2"
    3/4" x 9"
    3/4" x 1" x 9"
    1" x 10 1/4"
[5] E- Series® & Dynasonics® U500W:
    5/8" x 7 1/2" or 5/8" x 3/4" x 7 1/2"
    3/4" x 7 1/2" or 3/4" x 9"
    1" x 10 3/4"
    
    E Series® Only:
    1/2" x 4 1/3" [110mm] (DN15)
    1/2" x 6 1/2" [165mm] (DN15)
    3/4" x 7 1/2" [190.5mm] (DN20)
    1" x 10 1/4" [259.8mm] (DN25)
    1 1/4" x 10 1/4" [259.8mm] (DN32)
[6] M25 LL is Certified for the following sizes: 
    5/8" x 3/4" x 7 1/2" 
    5/8" x 7 1/2"
[7] M25 PN is Certified in the following sizes:
    5/8" x 7 1/2"	
    5/8" x 3/4" x 7 1/2"
    3/4" x 9"
[8] M35 LL is Certified for the following sizes: 
    3/4" x 7 1/2"
    3/4" x 9"
[9] M55 LL is Certified for the following size: 
    1" x 10 3/4"
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.
[10] M70 LL is Certified for the following size: 
     1" x 10 3/4"
[11] Complies with US EPA Maximum Contaminant Levels (MCLs) for PFAS according to
     NSF/ANSI/CAN 61.

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] (u) - Lining material
          PP - Polypropylene
          PT - PTFE
          EN - Ebonite
    (v) - Diameter nominal (DN)
          25  - 1"
          32  - 1 1/4"
          40  - 1 1/2"
          50  - 2"
          65  - 2 1/2"
          80  - 3"
          100 - 4"
          125 - 5"
          150 - 6"
          200 - 8"
          250 - 10"
          300 - 12"
          350 - 14"
          400 - 16"
    (w) - Gasket material
         00 - No O-Ring (for PTFE & Ebonite lining only)
         FF - FKM O-Ring (for PP lining only)
    (x) - Body material (ST,VH,VC)
    (y-y) Number and electrode material
    2-VH : 2 measure electrodes in AISI 316
    3-VH : 2 measure + 1 ground electrodes in AISI 316
    (z) - Execution and Protection Rate 
          1 - Remote 
          3 - Compact
    (x) and (z) are non-wetted components.
    16,40 is the pressure rate: no influence on the wetted components
    JW.. is the lenght of the cable: no influence on the wetted components
[2] (t) - Lining material
          PP - Polypropylene
          PT - PTFE
          EN - Ebonite
    (u) - Diameter Nominal (DN)
          25  - 1"
          32  - 1 1/4"
          40  - 1 1/2"
          50  - 2"
          65  - 2 1/2"
          80  - 3"
          100 - 4"
          125 - 5"
          150 - 6"
          200 - 8"
          250 - 10"
          300 - 12"
          350 - 14"
          400 - 16"
          450 - 18"
          500 - 20"
          550 - 22"
          600 - 24"
          650 - 26"
          700 - 28" 
          750 - 30"
          800 - 32"
          850 - 34"
          900 - 26"
          1000 - 40"
          1200 - 48"
          1400 - 56" 
          1600 - 62"
          1800 - 70"
          2000 - 78"
    (v) - Gasket material
          00 - No O-Ring (for PTFE & Ebonite lining only)
          FF - FKM O-Ring (for PP lining only)
    (w) - Flange type (FA-FD-FJ)
    (x) - Body material (ST,VH,VC)
    (y-y) Number and electrode material
    2-VH : 2 measure electrodes in AISI 316
    3-VH : 2 measure + 1 ground electrodes in AISI 316
    (z) - Execution and Protection Rate 
          1 - Remote 
          3 - Compact
    10, 16, 25, 40, 64 is the pressure rate: no influence on the wetted components
    JW.. is the lenght of the cable: no influence on the wetted components

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] HYDRUS 2.0 US 1 1/2 has a flange connection.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] Meter sizes are:
    2" x 10"
    3" x 8", 3" x 12"
    4" x 10", 4" x 14"
    6" x 12", 6" x 18"
    8" x 14", 8" x 20"
[2] HYDRUS 2.0 US 1 1/2 has a flange connection.
[3] HYDRUS 2.0 US 2 has a flange connection.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] HYDRUS 2.0 US 1 1/2 has a flange connection.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] All NSF-61 approved products must have the "DW" option code.
[2] 8705[A][B][C][D][E][F][G][H][I][J][K][L][M]
    A - Liner Material: T
    B - Electrode Material: S or H
    C - Electrode Type: A, B, E or F
    D - Line Size: 005, 010, 015, 020, 025, 030, 040, 050, 060, 080, 100, 120, 140, 160,
    180, 200, 240, 300, or 360.  (Where 360 = 36 inches)
    E - Flange Type = any one alpha or digital character
    F - Flange Rating = any one alpha or digital character
    G - Coil Housing Configuration = Any two-digit alpha or numeric characters
    H - Safety Approval = Any zero to two-digit alpha or numeric characters
    I - Submersion Protection = Any zero to three-digit alpha or numeric characters
    J - Grounding Rings:  G1, G2, G5 or G6
    K - Any 0 to 50-digit alpha or numeric characters
    L - Drinking Water Certification: DW
    M - Any 0 to 50-digit alpha or numeric characters
    8705[A][B][C][D][E][F][G][H][I][J][K][L][M]
    A - Liner Material: T
    B - Electrode Material: S or H
    C - Electrode Type: A, B, E or F
    D - Line Size: 005, 010, 015, 020, 025, 030, 040, 050, 060, 080, 100, 120, 140, 160,
    180, 200, 240, 300, or 360.  (Where 360 = 36 inches)
    E - Flange Type = any one alpha or digital character
    F - Flange Rating = any one alpha or digital character
    G - Coil Housing Configuration = Any two-digit alpha or numeric characters
    H - Safety Approval = Any zero to two-digit alpha or numeric characters
    I - Submersion Protection = Any zero to three-digit alpha or numeric characters
    J - Grounding Rings:  G1, G2, G5 or G6
    K - Any 0 to 50-digit alpha or numeric characters
    L - Drinking Water Certification: DW
    M - Any 0 to 50-digit alpha or numeric characters
    
[3] 8711[A][B][C][D][E][F][G][H][I][J][K][L]
    A - Liner Material: S
    B - Electrode Material: S or H
    C - Electrode Type: A, B, E or F
    D - Line Size: 005, 010, 015, 020, 025, 030, 040, 050, 060, or 080.  (Where 080 = 8
    inches)
    E - Transmitter Mount: any one alpha or digital character
    F - Mating Flange = any one alpha or digital character
    G - Safety Approval = Any zero to two-digit alpha or numeric characters
    H - Submersion Protection = Any zero to three-digit alpha or numeric characters
    I - Grounding Rings:  G1, G2, G5 or G6
    J - Any 0 to 50-digit alpha or numeric characters
    K - Drinking Water Certification: DW
    L - Any 0 to 50-digit alpha or numeric characters
    
[4] 8750W[A][B][C][D][E][F][G][H][I][J][K][L][M]
    A - Sensor Design Revision: any one alpha or digital character
    B - Transmitter Class: any one alpha or digital character
    C - Transmitter Power: any one alpha or digital character
    D - Conduit Entries: any one alpha or digital character
    E - Sensor style: any one alpha or digital character
    F - Liner Material: T 
    G - Electrode Material: S or H 
    H - Electrode Type: A, B, E or F 
    I - Line Size: 005, 010, 015, 020, 025, 030, 040, 050, 060, 080, 100, 120, 140, 160,
    180, 200,
    240, 300, 360, or 400.  (Where 400 = 40 inches)
    J - Any 0 to 50-digit alpha or numeric characters
    K - Grounding Rings:  G1, G2, G5 or G6
    L - Drinking Water Certification: DW
    M - Any 0 to 50-digit alpha or numeric characters
    
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements
    for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] All NSF-61 approved products must have the "DW" option code.
[2] 8705 [A][B][C][D][E][F][G][H][I][J][K][L][M]
    A - Liner Material - T (Line sizes - 0.5 inch to 36 inch) or P (Line sizes - 4 inch to 
        36 inch)
    B - Electrode Material - S or H
    C - Electrode Type - A, B, E or F
    D - Line Size - 005**, 010**, 015**, 020**, 025**, 030**, 040, 050, 060, 080, 100, 120, 
        140, 160, 180, 200, 240, 300, or 360.  (Where 360 = 36 inches) (** Line size 
        authorized for only Liner Material -  T)
    E - Flange Type - any one alpha or digital character
    F - Flange Rating - any one alpha or digital character
    G - Coil Housing Configuration - any two-digit alpha or numeric characters
    H - Safety Approval - any zero to two-digit alpha or numeric characters
    I - Submersion Protection - any zero to three-digit alpha or numeric characters
    J - Grounding Rings - G1, G2, G5, G6 or no characters
    K - Additional Options - any 0 to 50-digit alpha or numeric characters
    L - Drinking Water Certification - DW
    M - Additional Options - any 0 to 50-digit alpha or numeric characters
[3] Certification includes electrodes and optional grounding rings made from 316 Stainless
    Steel or Nickel alloy. Certification does not include grounding rings from any other
    material or lining protectors.
[4] 8705[A][B][C][D][E][F][G][H][I][J][K][L][M]
    A - Liner Material - T
    B - Electrode Material - S or H
    C - Electrode Type - A, B, E or F
    D - Line Size - 005, 010, 015, 020, 025, 030, 040, 050, 060, 080, 100, 120, 140, 160, 
        180, 200, 240, 300, or 360.  (Where 360 = 36 inches)
    E - Flange Type - any one alpha or digital character
    F - Flange Rating - any one alpha or digital character
    G - Coil Housing Configuration - any two-digit alpha or numeric characters
    H - Safety Approval - any zero to two-digit alpha or numeric characters
    I - Submersion Protection - any zero to three-digit alpha or numeric characters
    J - Grounding Rings - G1, G2, G5, G6 or no characters
    K - Additional Options - any 0 to 50-digit alpha or numeric characters
    L - Drinking Water Certification - DW
    M - Additional Options - any 0 to 50-digit alpha or numeric characters
[5] 8711 [A][B][C][D][E][F][G][H][I][J][K][L]
    A - Liner Material - S
    B - Electrode Material - S or H
    C - Electrode Type - A, B, E or F
    D - Line Size - 005, 010, 015, 020, 025, 030, 040, 050, 060, or 080. 
        (Where 080 = 8 inches)
    E - Transmitter Mount -  any one alpha or digital character
    F - Mating Flange - any one alpha or digital character
    G - Safety Approval - any zero to two-digit alpha or numeric characters
    H - Submersion Protection - any zero to three-digit alpha or numeric characters
    I - Grounding Rings - G1, G2, G5, G6 or no characters 
    J - Any 0 to 50-digit alpha or numeric characters
    K - Drinking Water Certification - DW
    L - Any 0 to 50-digit alpha or numeric characters
[6] 8711[A][B][C][D][E][F][G][H][I][J][K][L]
    A - Liner Material - S
    B - Electrode Material - S or H
    C - Electrode Type - A, B, E or F
    D - Line Size - 005, 010, 015, 020, 025, 030, 040, 050, 060, or 080.  
        (Where 080 = 8 inches)
    E - Transmitter Mount - any one alpha or digital character
    F - Mating Flange - any one alpha or digital character
    G - Safety Approval - any zero to two-digit alpha or numeric characters
    H - Submersion Protection - any zero to three-digit alpha or numeric characters
    I - Grounding Rings - G1, G2, G5, G6 or no characters 
    J - Any 0 to 50-digit alpha or numeric characters
    K - Drinking Water Certification - DW
    L - Any 0 to 50 - digit alpha or numeric characters
[7] 8750W [A][B][C][D][E][F][G][H][I][J][K][L][M][N][O]
    A - Sensor Design Revision - any one alpha or digital character
    B - Transmitter Class - any one alpha or digital character
    C - Transmitter Mount - any one alpha or digital character
    D - Transmitter Power - any one alpha or digital character
    E - Transmitter Outputs - any one alpha or digital character
    F - Conduit Entries - any one alpha or digital character
    G - Sensor style - any one alpha or digital character
    H - Liner Material - T (Line sizes - 0.5 inch to 48 inch) or P (Line sizes - 4 inch to 
        48 inch)
    I - Electrode Material - S or H
    J - Electrode Type - A, B, E or F
    K - Line Size - 005**, 010**, 015**, 020**, 025**, 030**, 040, 050, 060, 080, 100, 120, 
        140, 160, 180, 200, 240, 300, 360, 400,420, or 480.  (Where 480 = 48 inches) 
        (** Line size authorized for only Liner Material - T)
    L - Flange Type, Flange Rating, Flange Material, Safety Approvals, and Other options - 
        any three to 50-digit alpha or numeric characters
    M - Grounding Rings - G1, G2, G5, G6 or no characters 
    N - Drinking Water Certification - DW
    O - Additional Options - any 0 to 50-digit alpha or numeric characters
[8] 8750W[A][B][C][D][E][F][G][H][I][J][K][L][M][N][O]
    A - Sensor Design Revision - any one alpha or digital character
    B - Transmitter Class - any one alpha or digital character
    C - Transmitter Mount - any one alpha or digital character
    D - Transmitter Power - any one alpha or digital character
    E - Transmitter Outputs - any one alpha or digital character
    F - Conduit Entries - any one alpha or digital character
    G - Sensor style - any one alpha or digital character
    H - Liner Material - T
    I - Electrode Material - S or H 
    J - Electrode Type - A, B, E or F 
    K - Line Size - 005, 010, 015, 020, 025, 030, 040, 050, 060, 080, 100, 120, 140, 160, 
        180, 200,240, 300, 360, 400,420, or 480.  (Where 480 = 48 inches) 
    L - Flange Type, Flange Rating, Flange Material, Safety Approvals, and Other options - 
        Any three to 50-digit alpha or numeric characters
    M - Grounding Rings - G1, G2, G5, G6 or no characters 
    N - Drinking Water Certification - DW
    O - Additional Options - Any 0 to 50-digit alpha or numeric characters
[9] 8705[A][B][C][D][E][F][G][H][I][J][K][L][M]
     A: Liner Material: H
     B: Electrode Material: S or H
     C: Electrode Type: A, B, E or F
     D:  Line Size: 005, 010, 015, 020, 025, 030, 040, 050, 060, 080, 100, 120, 140, 160,
    180, 200, 240, 300, or 360.  (Where 360 = 36 inches)
     E: Flange Type = any one alpha or digital character
     F: Flange Rating = any one alpha or digital character
     G: Coil Housing Configuration = Any two-digit alpha or numeric characters
     H: Safety Approval = Any zero to two-digit alpha or numeric characters
      I: Submersion Protection = Any zero to three-digit alpha or numeric characters
     J: Grounding Rings: G1, G2, G5, G6 or no characters
     K: Additional Options:  Any 0 to 50-digit alpha or numeric characters
     L: Drinking Water Certification: DW
     M: Additional Options:   Any 0 to 50-digit alpha or numeric characters
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.
[10] 8750W[A][B][C][D][E][F][G][H][I][J][K][L][M][N][O]
       A: Sensor Design Revision: any one alpha or digital character
       B: Transmitter Class: any one alpha or digital character
       C: Transmitter Mount: any one alpha or digital character
       D: Transmitter Power: any one alpha or digital character
       E: Transmitter Outputs: any one alpha or digital character
       F:  Conduit Entries: any one alpha or digital character
       G: Sensor style: any one alpha or digital character
       H: Liner Material: H
       I: Electrode Material: S or H 
       J: Electrode Type: A, B, E or F 
       K: Line Size: 005, 010, 015, 020, 025, 030, 040, 050, 060, 080, 100, 120, 140, 160,
     180, 200, 240, 300 or 360.  (Where 360 = 36 inches) 
       L: Flange Type, Flange Rating, Flange Material, Safety Approval
       M: Grounding Rings: G1, G2, G5, G6 or no characters 
       N: Drinking Water Certification: DW
       O: Additional Options:  Any 0 to 50-digit alpha or numeric characters
[11] MS [A][B][C][D][E][F][G][H][I][J][K][L][M]
      A - Line Size - 005, 010, 015, 020, 025, 030, 040, 050, 060, 080, 100, 120,140, 160,
     180, 200, 240, 300, or 360.  (Where 360 = 36 inches)    
      B – Revision level A
      C – Mounting configuration – Remote Mount
      D – Conduit Entries – ½ NPT or M20    
      E - Liner Material - H 
      F - Electrode Material - S or H
      G – Electrode Type- A, B, E or F
      H – Flange Material- any one alpha or digital character
      I - Flange Type - any one alpha or digital character
      J - Flange Rating - any one alpha or digital character
      K - Coil Housing Configuration - any two-digit alpha or numeric characters
      L - Safety Approval - any zero to two-digit alpha or numeric characters
      M – Grounding Rings - G1, G2, G5, G6 or no characters
      N - Drinking Water Certification – DW
      O - Additional Options - any 0 to 50-digit alpha or numeric characters
[PFAS] Complies with US EPA Maximum Contaminant Levels (MCLs) for PFAS according to
      NSF/ANSI/CAN 61.

[1] Liner: Polyamide
    Electrode Options: 1.4435/316L SS
[2] Liner: Hard Rubber
    Electrode Options: 1.4435/316L SS, Alloy C-22
[3] Liner: Polyurethane
    Electrode Options: 1.4435/316L SS, Alloy C-22
[4] Liner: PTFE
    Electrode Options: 1.4435/316L SS, Alloy C-22
[5] Only products bearing the NSF Mark on the product, product packaging, and/or
    documentation shipped with the product are Certified.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] Liner: Polyurethane
    Electrode Options: 1.4435/316L SS, Alloy C-22
[2] Only products bearing the NSF Mark on the product, product packaging, and/or
    documentation shipped with the product are Certified.
[3] Liner: Hard Rubber
    Electrode Options: 1.4435/316L SS, Alloy C-22
[4] Liner: Polyamide
    Electrode Options: 1.4435/316L SS
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] Liner: Hard Rubber
    Electrode Options: 1.4435/316L SS, Alloy C-22
[2] Only products bearing the NSF Mark on the product, product packaging, and/or
    documentation shipped with the product are Certified.
[3] Liner: Polyamide
    Electrode Options: 1.4435/316L SS
[4] Liner: Polyurethane
    Electrode Options: 1.4435/316L SS, Alloy C-22
[5] Liner: PTFE
    Electrode Options: 1.4435/316L SS, Alloy C-22
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] Liner: Polyamide
    Electrode Options: 1.4435/316L SS
[2] Liner: Polyurethane
    Electrode Options: 1.4435/316L SS, Alloy C-22
[3] Only products bearing the NSF Mark on the product, product packaging, and/or
    documentation shipped with the product are Certified.
[4] Liner: Hard Rubber
    Electrode Options: 1.4435/316L SS, Alloy C-22
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[2] Nomenclature of KT Series Paddle Flow Sensor & Flow Meter:KTA-B-C-D-E-F
    Nomenclature of AT Series Paddle Flow Sensor & Flow Meter:ATA-B-C-D-E-F
    
    A - Type
        M - Flow rate meter with transmitter
        P - Flow rate meter & Flow total meter
        S - Flow rate meter
        W - Flow sensor
        C - Battery type LCD Flow meter
    
    B - Pipe size
        15  - DN 15 (1/2")
        20  - DN 20 (3/4")
        25  - DN 25 (1")
        40  - DN 40 (1 1/2")
        50  - DN 50 (2")
        65  - DN 65 (2 1/2")
        80  - DN 80 (3")
        100 - DN 100 (4")
    
    C - Function option
        Non - Standard type
        RS  - KTP type with MODBUS communication
        A   - KTM & KTW types with transmitter (4 - 20 mA)
        V   - KTM & KTW types with transmitter (0 – 5 V)
        P   - KTW type pulse output only
    
    D - Material of union (PVC)
    
    E – Pipe standard
        DIN  - DIN standard
        JIS  - JIS standard
        ANSI – ANSI standard
    
    F – Connection method
        Non - Lear wire 3m
        5m  - Lear wire 5m
        M12 - Connector M12
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[2] Certification request does not include flange gaskets.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] UM (A)(B)(C)(D)(E)(F)-(G)(H)-(J)(K) where:
    A - SIZE
    	025 = 1 Inch, PVC, Sch 80
    	040 = 1-1/2 Inch, PVC, Sch 80
    	050 = 2 Inch, PVC, Sch 80
    	080 = 3 Inch, PVC, Sch 80
    	100 = 4 Inch, PVC, Sch 80
    	150 = 6 inch, Saddle
    	200 = 8 inch, Saddle
    	250 = 10 inch, Saddle
    	300 = 12 inch, Saddle
    B - Connection Type
    	SK = Socket (Meter w/ Tee: 1" to 4")
    	NF = NPT, Female (Meter w/ Tee: 1" to 4")
    	TF = BSPT, Female (Meter w/ Tee: 1", 1-1/2", 2")
    	FA = Flange, ANSI (Meter w/ Tee: 3", 4")
    	FD = Flange, DIN (Meter w/ Tee: 3", 4")
    	ST = Tube (Meter w/ Saddle Only)
    	SP = Pipe (Meter w/ Saddle Only)
    	SI = Plastic Irrigation Pipe (Saddle Meter Only)
    	XX = Insert Sensor Only (No meter body)
    C - Meter Body Material
    	P = PVC (Meter w/ Tee Only)
    	A = Aluminum (Meter w/ Saddle Only)
    	X = Insert Sensor Only (No meter body)
    D - Wetted Internals
    	RU = Ryton Sensor Body, Ultem XDCRs, EPDM O-rings
    	XX = Replacement Display Only
    E - Special Options
    	XX = Not applicable to UM meters
    F- Meter Accuracy
    	A20 =  2%  (All UM Meters)
    	XXX = N/A (Electronics Only)
    G - Electronics
    	QUDSBA = Battery Powered Local Display
    	QUC1LP = Loop Powered 4-20mA w/ Pulse Output; Local Display
    H - Certification
    	N1 = CE and NSF
    J - Display Configuration
    	GM = Gallon per Minute
    	LM = Liter per Minute
    K - Packaging Varies with configuration options
[2] QS2-(A)-(B)-P:
    A = Pipe Size
    060 = 6” diameter
    080 = 8” diameter
    100 = 10” diameter
    120 = 12” diameter
    B = Pipe Specification
    NPS = NPS/IPS/ASME Pipe
    TB = Metal Irrigation Tube Pipe
    PIP = Plastic Irrigation Pipe
[3] QS-200PW is the sensor insert only.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] Only products bearing the NSF Mark on the product, product packaging, and/or
    documentation shipped with the product are Certified.
[2] Sonico NANO DN15 (3/4" x 3/4") is Certified for the following lengths: 105, 110, 115,
    134, 142, 145, 160, 165, 170, and 190 mm.
[3] Sonico NANO DN15 (7/8" x 3/4") is Certified for the following lengths: 115 and 170 mm.
[4] Sonico NANO DN15 (1" x 1") is Certified for a length of 220 mm.
[5] Sonico NANO DN20 (1" x 1") is Certified for the following lengths: 105, 110, 115, 130,
    160, 165, 190, and 220 mm.
[6] Sonico NANO DN25 (1 1/4" x 1 1/4") is Certified for the following lengths: 150, 160,
    175, 198, 220, 260, and 273 mm.
[7] Sonico NANO DN32 (1 1/4" x 1 1/4") is Certified for the following lengths: 150 and 200
    mm.
[8] Sonico NANO DN32 (1 1/2" x 1 1/2") is Certified for the following lengths: 160, 220, and
    260 mm.
[9] Sonico NANO DN40 (2" x 2") is Certified for the following lengths: 150, 200, 300, and
    324 mm.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] Also Certified for equivalent metric sizes.
[2] Only products bearing the NSF Mark on the product, product packaging, and/or
    documentation shipped with the product are Certified.
[3] This product may be used in cold (73F/23C) applications.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] Product also complies with NSF/ANSI 372.
[2] Certified for the following sizes:
    1.5" x 13" overall length
    2" x 10" overall length
    2" x 15.25" overall length
    2" x 17" overall length
[3] Certified for the following sizes:
    1.5" x 13" overall length
    2" x 10" overall length
    3" x 12" overall length
    4" x 14" overall length
    6" x 18" overall length
    8" x 20" overall length
    10" x 18" overall length
    12" x 20" overall length
[4] Certified for the following sizes:
    1.5" x 13" overall length
    2" x 10" overall length
    2" x 15.25" overall length
    2" x 17" overall length
    3" x 12" overall length
    4" x 14" overall length
    6" x 18" overall length
    8" x 20" overall length
    10" x 18" overall length
    12" x 20" overall length
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] Only products bearing the NSF Mark on the product, product packaging, and/or
    documentation shipped with the product are Certified.
[2] Certified for the following sizes:
    15 x 115 mm (1/2")
    15 x 165 mm (1/2")
    15 x 190 mm (1/2")
    20 x 115 mm (3/4")
    20 x 165 mm (3/4")
    20 x 190 mm (3/4")
    25 x 273 mm (1")
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[2] Nomenclature of TK Series Paddle Flow Sensor & Flow Meter: TKA-B-C-D-E
    A - Type 
        B - Battery type LCD flow rate meter & flow total meter 
        S - Flow rate meter with Pulse | Relay 
        P - Flow rate meter & flow total meter with Pulse | RS485
        M - Flow rate meter & flow total meter with Pulse | 4-20mA 
        W - Flow sensor with Pulse | Voltage | 4-20mA 
    
    B - Pipe size 
        15 - 1/2” (DN 15) 
        20 - 3/4” (DN 20) 
        25 - 1” (DN 25) 
        40 - 1 1/2” (DN 40) 
        50 - 2” (DN 50) 
        65 - 2 1/2” (DN 65) 
        80 - 3” (DN 80) 
        100 - 4” (DN 100) 
    
    C - Function option 
        Non - Standard type 
        RS - TKP type with MODBUS communication 
        A - TKW type with transmitter (4 - 20 mA) 
        V - TKW type with transmitter (0 – 5 V) 
        PA - TKW type with 4-20mA + pulse output 
    
    D - Material of union: 
        P - for PVC 
    
    E – Type of Seals 
        Non - Viton 
        E - EPDM 
        K - FFKM (Kalrez®)
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] Certification does not include the optional pressure sensor.
[2] CS3795-wxyzab
    w - Maximum depth on the pipe
        A - 500 mm
        B - 1000 mm
        C - 2000 mm
    x - Sensor and electrode material/ lining
    1 - Sensor material AISI 316 PEEK Lining, Electrodes in Hastelloy C276
    y - Connection type (A-C)
    z - Analog output (0-1)
    a - Digital Output (A-B)
    b - Electrical Connection (1-2)
[3] CS3820-wxyzabcd
    w - Maximum depth on the pipe
        0 - 150 mm
        1 - 300 mm
        2 - 500 mm
        3 - 700 mm
        4 - 1000 mm
        5 - 2000 mm
        9 - to be specified
    x - Sensor and electrode material/ lining
        A - Sensor material AISI 316 PEEK Lining, Electrodes in Hastelloy C276 gasket in FKM
    
            nek in SS AISI304L
    y - Accessory for mounting in pressurized pipe line (1-8)
    z - Version /protection rate (A-F)
    a - Type of converter (0-1)
    b - Suitable for Pipe Size (A-B)
    c - Accuracy (1-2)
    d - Data Logger (A-E)
    Y and Z are non-wetted parts except for ball valve
[4] MS 1000-(u)(v)-(w)(x)(y)(z)
    u - Lining material
        P - Polypropylene
        T - PTFE
        E - Ebonite
    v - Diameter nominal (DN)
        25  - 1"
        32  - 1 1/4"
        40  - 1 1/2"
        50  - 2"
        65  - 2 1/2"
        80  - 3"
        100 - 4"
        125 - 5"
        150 - 6"
        200 - 8"
        250 - 10"
        300 - 12"
        350 - 14"
        400 - 16"
    w -Gasket material
        0 - No O-Ring (for PTFE & Ebonite lining only)
        1 - FKM O-Ring (for PP lining only)
    x - Body material (A-C, Z)
    y - Number and electrode material
        1 - 2 measure electrodes in AISI 316
        2 - 2 measure + 1 ground electrodes in AISI 316
    z - Execution and Protection Rate (A, B, F, G, N, Q, U, S, T, P, R, K, Y, W, V, J)
    x and z are non-wetted components.
[5] MS 2500-(t)(u)-(v)(w)(x)(y)(z)
    t - Lining material
        P - Polypropylene
        T - PTFE
        E - Ebonite
    u - Diameter Nominal (DN)
        25   - 1"
        32   - 1 1/4"
        40   - 1 1/2"
        50   - 2"
        65   - 2 1/2"
        80   - 3"
        100  - 4"
        125  - 5"
        150  - 6"
        200  - 8"
        250  - 10"
        300  - 12"
        350  - 14"
        400  - 16"
        450  - 18"
        500  - 20"
        550  - 22"
        600  - 24"
        650  - 26"
        700  - 28"
        750  - 30"
        800  - 32"
        850  - 34"
        900  - 36"
        1000 - 40"
        1050 - 42"
        1200 - 48"
        1400 - 56"
        1600 - 62"
        1800 - 70"
        2000 - 78"
    v - Gasket material
        A - No O-Ring (for PTFE & Ebonite only)
        B - FKM O-Ring (for PP lining only)
    w - Flange type (0-9)
    x - Body and flange material (A-C, Z)
    y - Number and electrode material
        2 - 2 measure + 1 ground electrodes in AISI 316
    z - Version and protection rate (A, B, F, G, N, Q, U, S, T, P, R, K, Y, W, V, J)
    w, x, & z are non-wetted components.
[6] MS3780-wxyz
    w - Maximum depth on the pipe
        1 - 500 mm
        2 - 1000 mm
        3 - 2000 mm
        4 - to be specified
    X - Sensor and electrode material/lining/internal gasket
    A - Sensor material AISI 316 PEEK Lining, Electrodes in Hastelloy C276
    Y - connection type (1-0)
    Z - Execution/protection rate (A-W)
    Y and Z are non-wetted parts
[7] MS 3810 - wxyabz
    w - Maximum depth on the pipe
        0 - 150 mm   
        1 - 300 mm   
        2 - 500 mm   
        3 - 700 mm
        4 - 1000 mm   
        5 - 2000 mm
        9 - 80 mm
    x - Sensor and electrode material / lining / internal gasket
        A - Sensor material AISI316, PEEK lining, electrodes in Hastelloy C276, gasket in
    FKM, NEK in SS AISI 316
    y - Accessory for mounting in pressurized pipe line (1-9)
    a - suitable for Pipe (A, B)
    b - Accuracy (0, 1)
    z - Execution / Protection rate (A, B, F, G, N, Q, U, S, T, P, R, K, Y, W, V, J)
    y and z are non-wetted components.

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] Only products bearing the NSF Mark on the product, product packaging, and/or
    documentation shipped with the product are Certified.
[2] Available dimensions (thread diameter x lay length):
    1"x 7 1/2" (threaded)
    1" x 9" (threaded)
    1 1/4" x 10 3/4" (threaded)
    1 1/2" x 13" (flanged)
    2" x 15 1/4" (flanged)
    2" x 17" (flanged)
    3" x 12" (flanged)
    4" x 14" (flanged)
[3] The actual model sizes are:
    5/8" x 7 1/2" - 3/4" connection size
    5/8" x 3/4" x 5,1" - 1" connection size
    5/8" x 3/4" x 7 1/2" - 1" connection size
    3/4" x 7 1/2" - 1" connection size
        
    Available dimensions (thread diameter x lay length):
    3/4" x 7 1/2" - 3/4" connection size
    1" x 5.1" - 1" connection size
    1" x 7 1/2" - 1" connection size
    Certification does not include the brass coupling or check valve.
[4] Available dimensions (flange connection x lay length);
    5" (DN125) x 10" (250mm)
    6" (DN150) x 12" (300mm)
    8" (DN200) x 14" (350mm)
    10" (DN250) x 18" (450mm)
    12" (DN300) x 20" (500mm)
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] Only products bearing the NSF Mark on the product, product packaging, and/or
    documentation shipped with the product are Certified.
[2] The actual model sizes are:
    5/8" x 7 1/2": 3/4" connection size
    5/8" x 3/4" x 5,1”: 1" connection size
    5/8" x 3/4" x 7 1/2": 1" connection size
    3/4" x 7 1/2": 1" connection size
    
    Available dimensions (thread diameter x lay length):
    3/4" x 7 1/2": 3/4" connection size
    1" x 5.1”- :1" connection size
    1” x 7 1/2": 1" connection size
    Certification does not include the brass coupling or check valve.
[3] Available dimensions (flange connection x lay length):
    5" (DN125) x 10" (250mm)
    6" (DN150) x 12" (300mm)
    8" (DN200) x 14" (350mm)
    10" (DN250) x 18" (450mm)
    12" (DN300) x 20" (500mm)
[4] Available dimensions (thread diameter x lay length):
    1"x 7 1/2" (threaded)
    1" x 9" (threaded)
    1 1/4" x 10 3/4" (threaded)
    1 1/2" x 13" (flanged)
    2" x 15 1/4" (flanged)
    2" x 17" (flanged)
    3" x 12" (flanged)
    4" x 14" (flanged)
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] Only products bearing the NSF Mark on the product, product packaging, and/or
    documentation shipped with the product are Certified.
[2] "xxx" in the trade name can be any 3-digit number and identifies the model of the
    electronics unit (non-wetted part), and "y" is any character or series of characters
    identifying electronics unit options.
[3] Certified product contains Hastelloy C-22, Hastelloy C-4 or Stainless Steel 1.4571
    electrodes, hard rubber liner, and optional Stainless Steel grounding rings.
[4] DN25 - DN3000/1" - 120"
[5] Certified product contains Hastelloy C-22, Hastelloy C-4 or Stainless Steel 1.4571
    electrodes, polypropylene liner, and optional Stainless Steel grounding rings.
[6] DN25 - DN150/1" - 6"
[7] DN25 - DN 600/1" - 24"
[8] Certified product contains Hastelloy C-22 or Stainless Steel electrodes, optional
    Stainless Steel PT sensor, coated liner, o-rings, and optional Stainless Steel grounding
    rings.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] Only products bearing the NSF Mark are Certified.
[2] "xxx" in the trade name can be any 3-digit number and identifies the model of the
    electronics unit (non-wetted part), and "y" is any character or series of characters
    identifying electronics unit options.
    
    The Letters "KC" may or may not appear in the Model Name to indicate the facility
    location as Embu-Sao Paulo, Brazil.
    
    Certified product contains Hastelloy C-22, Hastelloy C-4, or Stainless Steel electrodes,
    a hard rubber liner, and optional Stainless Steel grounding rings. 
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] Meter bodies can be composed of Bialloy or Stainless Steel.
[2] Sizes:
    5/8" x 1/2" Standard
    5/8" x 3/4" Standard
    3/4" x 7 1/2" Short
    3/4" x 9" Standard
    3/4" x 9" x 1" Standard
    1" Standard
    3/4" x 7 1/2" High Capacity
[3] The MS Multijet Water Meter may be supplied with either threaded or flanged connections.
[4] The Certified Octave Stainless Steel Ultrasonic Water Meters include the following sizes
    and end connections:
    
    1.5" x 13" S.St MM Fixed Oval Flanges
    1.5" x 10" S.St MM Fixed Oval Flanges
    1.5" x 12.625" S.St MM NPT
    2" x 10" S.St MM Fixed Oval Flanges
    2" x 15.25" S.St MM Fixed Oval Flanges
    2" x 17" S.St MM Fixed Oval Flanges
    2" x 15.25" S.St MM Fixed Oval NPT
[5] Meter bodies can be composed of Stainless Steel CF8M or coated Cast or Ductile Iron or
    nylon.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] Sizes:
    5/8” x ½” Standard
    5/8” x ¾” Standard
    ¾” x 7 ½” Short
    ¾” x 9” Standard
    ¾” x 9” x 1” Standard
    1” Standard
    ¾” x 7 ½” High Capacity
    
    Meter bodies can be composed of C89836.
    
    MP BLMJ Multijet Water Meter ¾” x 7 ½” Short and MP BLMJ Multijet Water Meter ¾” x 9”
    Standard water meters are only manufactured at facility #70132.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] Poly-480 Polymer Connections may be sold separately from the Versamag-Polymer water
    meters.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.