NSF Product and Service Listings

[1] Only products bearing the NSF Mark on the product, product packaging, and/or
    documentation shipped with the product are Certified.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] Only products bearing the NSF Mark on the product, product packaging, and/or
    documentation shipped with the product are Certified.

[1] Only products bearing the NSF Mark on the product, product packaging, and/or
    documentation shipped with the product are Certified.
[2] Certified for the following configurations: PN16, SDR11, and 20 mm - 315 mm.
[3] Certified for the following configurations: PN16, SDR11, and 90 x 63 mm - 315 x 250 mm.
[4] The following sizes/models are certified:
    2"
    PN10/SDR17
    PN16/SDR11
    PN20/SDR9
    PN25/SDR7
    3"
    PN10/SDR17
    PN16/SDR11
    PN20/SDR9
    PN25/SDR7
    4"
    PN10/SDR17
    PN16/SDR11
    PN20/SDR9
    PN25/SDR7
    6"
    PN10/SDR17
    PN16/SDR11
    PN20/SDR9
    PN25/SDR7
    8"
    PN10/SDR17
    PN16/SDR11
    PN20/SDR9
    PN25/SDR7
    10"
    PN10/SDR17
    PN16/SDR11
    PN20/SDR9
    PN25/SDR7
    12"
    PN10/SDR17
    PN16/SDR11
    PN20/SDR9
    PN25/SDR7

[1] Only products bearing the NSF Mark on the product, product packaging, and/or
    documentation shipped with the product are Certified.

[1] MBI - MB is the FRIATEC identification for a coupler with a removable stop, I indicates
    inch size.
[2] MRI - MR is the FRIATEC identification for an e/f reducer, I indicates inch size.
[3] UBI - UB is the FRIATEC identification for a coupler without a stop, I indicates inch
    size.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[4] Size - The first number refers to the diameter of the host pipe and the second number
    refers to the diameter of the outlet.
[5] TL - FRIATEC pneumatic Top-Loading tool required.
[6] Dimensions given in brackets, e.g. SA-TL d(10-22) x 3:
    This saddle fitting can be fused on a main pipe of a size which is between and including
    10 to 22 inch. 3 inch indicates the size of the outlet. 
    The dimension indication "(xx-yy)" is only possible for saddles.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] INNOGAZ and FRIALEN Brands
[2] Certification also include metric sizes for the following:
    Electrofusion Coupler - 20 – 75 mm
    Electrofusion Reducer - 25 x20 - 63x50 mm
    Electrofusion Tee with Spigot Outlet - 20 - 75 mm
[3] Certification includes the following:
    
    Elbow
    FRIALEN Elbow Sizes 1”, 1-1/4”, 2”, 4
    
    Spigot
    FRIALEN Tee (with Spigot outlet) Sizes 1", 1-1/4", 2", 4"
    
    End Cap
    FRIALEN End Cap Sizes 1", 1-1/4", 2", 4"
    
    Coupler
    E/F COUPLER 1-1/2" IPS
    E/F COUPLER 1-1/4" IPS
    E/F COUPLER 1/2" CTS
    E/F COUPLER 3/4" IPS
    E/F COUPLER 1" CTS
    E/F COUPLER 1" IPS
    E/F COUPLER 2" IPS
    E/F Coupler d20mm
    E/F Coupler d25mm
    E/F Coupler d32mm
    E/F Coupler d40mm
    E/F Coupler d50mm
    E/F Coupler d63mm
    E/F Coupler d75mm
    
    Reducer
    E/F REDUCER 1"CTS X 1/2" CTS
    E/F REDUCER 1"CTS X 3/4" IPS
    E/F REDUCER 1"IPS X 1"CTS
    E/F REDUCER 3/4" IPS X 1/2" CTS
    E/F REDUCER 2" IPS X 1-1/4" IPS
    E/F Reducer 25mm X 20mm
    E/F Reducer 32 X 20mm
    E/F Reducer 32 X 25mm
    E/F Reducer 40 X 32mm
    E/F Reducer 50 X 40mm
    E/F Reducer 63 X 32mm
    E/F Reducer 63 X 40mm
    E/F Reducer 63 X 50mm
    
    Elbow 90°
    E/F Elbow W90°d20mm
    E/F Elbow W90°d25mm
    E/F Elbow W90°d32mm
    E/F Elbow W90°d40mm
    E/F Elbow W90°d50mm
    E/F Elbow W90°d63mm
    E/F Elbow W90°d75mm
    
    Elbow 45°
    E/F Elbow W45°d25mm
    E/F Elbow W45°d32mm
    E/F Elbow W45°d40mm
    E/F Elbow W45°d50mm
    E/F Elbow W45°d63mm
    E/F Elbow W45°d75mm
    
    Tee
    E/F Tee 20mm
    E/F Tee 25mm
    E/F Tee 32mm
    E/F Tee 40mm
    E/F Tee 50mm
    E/F Tee 63mm
    E/F Tee 75mm
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] Product tradename may include HyperFusion
[2] Sizes may be identified in metric as follows:
    1 1/4" x 1" (40 mm x 32 mm)
    1 1/2" x 1" (50 mm x 32 mm)
    1 1/2" x 1 1/4" (50 mm x 40 mm)
    2" x 1" (63 mm x 32 mm)
    2" x 1 1/4" (63 mm x 40 mm)
    2" x 1 1/2" (63 mm x 50 mm)
    40 mm x 1 1/4"
    50 mm x 1 1/2" 
    63 mm x 2" 
    40 mm (1 1/4") x 1" 
    50 mm (1 1/2") x 1 1/4" 
    50 mm (1 1/2") x 1"
    63 mm (2") x 1 1/2"
    63 mm (2") x 1 1/4"

[1] Certified for fittings without gaskets or center register.
[2] Only products bearing the NSF Mark on the product, product packaging, and/or
    documentation shipped with the product are Certified.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] Certified for equivalent metric sizes in millimetres.
[2] Certified for sizes 1/2", 3/4", 1", 1 1/4", 1 1/2" and 2".
[3] Certified for sizes 1/2", 3/4", 1", 1 1/4", 1 1/2", 2", 2 1/2", 3", 4", 6" and 8"
[4] Certified for sizes 1/2", 3/4", 1", 1 1/4", 1 1/2", 2", 2 1/2" 3", 4", 6" and 8"
[5] Certified for sizes 1/2", 3/4", 1", 1 1/4", 1 1/2", 2", 2 1/2", 3", 4" and 6"
[6] Certified for sizes 1/2" x 1/2", 3/4" x 3/4", 1" x 1", 1 1/4", x 1 1/4", 1 1/2" x 1 1/2"
    and 2" x 2"
[23] Certified for sizes ¾" x½" , 1"x ½" , 1"x ¾",1 ¼"x ½", 1 ¼"x ¾",1 ¼"x 1, 1 ½"x ½", 1 ½"x
     ¾", 1 ½"x 1", 1 ½"x 1 ¼", 2"x ¾", 2"x1", 2"x 1 ¼", 2"x 1 ½", 2 ½"x 1 ½", 2 ½"x 2",
     3"x2", 3"x 2 ½", 4" x 2", 4"x3", 6"x3", and 6"x4"
     
[24] ¾" x½" , 1"x ½" , 1"x ¾",1 ¼"x ½", 1 ¼"x ¾",1 ¼"x 1, 1 ½"x ½", 1 ½"x ¾", 1 ½"x 1", 1 ½"x
     1 ¼", 2"x ¾", 2"x1", 2"x 1 ¼", 2"x 1 ½", 2 ½"x 1 ½",  2 ½"x 2", 3"x2", 3"x 2 ½", 4" x
     2", 4"x3", 6"x3" and 6"x4"
     
[25] Certified for sizes 2" through 6"

[7] Certified for sizes 16 mm x 3/8", 20 mm x 1/2", 25 mm x 3/4", 32 mm x 1", 40 mm x
    1-1/4", 50 mm x 1-1/2", 63 mm x 2".
[8] Certified for sizes 16 mm x 3/8", 20 mm x 1/2", 25 mm x 3/4", 32 mm x 1", 40 mm x
    1-1/4", 50 mm x 1-1/2", 63 mm x 2", 75 mm x 2-1/2", 90 mm x 3", 110 mm x 4", 160 mm x 6".
[9] Certified for sizes 50 mm, 63 mm, 75 mm, 90 mm, 110 mm, 160 mm.
[10] Certified for sizes 25 mm, 40 mm.
[11] Certified for sizes 16 mm, 20 mm, 25 mm, 32 mm, 40 mm, 50 mm, 63 mm, 75 mm, 90 mm, 110
     mm, 160 mm.
[12] Certified for sizes 16 mm, 20 mm, 25 mm, 32 mm, 40 mm, 50 mm, 63 mm, 75 mm, 90 mm, 110
     mm, 160 mm, 225 mm.
[13] Certified for sizes 50 mm, 63 mm, 75 mm, 90 mm, 110 mm, 160 mm, 225 mm.
[14] Certified for sizes 75 mm x 63 mm, 90 mm x 63 mm, 110 mm x 63 mm, 110 mm x 90 mm, 160 mm
     x 63 mm, 160 mm x 90 mm, 160 mm x 110mm.
[15] Certified for sizes 63 mm x 63 mm x 63 mm, 75 mm x 75 mm x 75 mm, 90 mm x 90 mm x 90 mm,
     110 mm x 110 mm x 110 mm, 160 mm x 160mm x 160 mm.
[16] Certified for sizes 20 mm x 16 mm, 25 mm x 20 mm, 32 mm x 20 mm, 32 mm x 25 mm, 40 mm x
     20 mm, 40 mm x 25 mm, 40 mm x 32 mm, 50mm x 32 mm, 50 mm x 40 mm, 63 mm x 32 mm, 63 mm x
     40 mm, 63 mm x 50 mm, 75 mm x 50 mm, 75 mm x 63 mm, 90 mm x 50 mm, 90 mm x 63mm, 90 mm x
     75 mm, 110 mm x 50 mm, 110 mm x 63 mm, 110 mm x 90 mm, 160 mm x 90 mm, 160 mm x 110 mm,
     225 mm x 160 mm.
[17] Certified for sizes 20 mm x 16 mm, 25 mm x 16 mm, 25 mm x 20 mm, 32 mm x 16 mm, 32 mm x
     20 mm, 32 mm x 25 mm, 40 mm x 20 mm, 40mm x 25 mm, 40 mm x 32 mm, 50 mm x 20 mm, 50 mm x
     25 mm, 50 mm x 32 mm, 50 mm x 40 mm, 63 mm x 25 mm, 63 mm x 32 mm, 63 mm x 40mm, 63 mm x
     50 mm, 75 mm x 32 mm, 75 mm x 40 mm, 75 mm x 50 mm, 75 mm x 63 mm, 90 mm x 63 mm, 25 mm
     x 1/2", 32 mm x 3/4", 40 mm x 1/2", 40 mm x 1", 50 mm x 1/2", 50 mm x 1-1/4", 63 mm x
     1-1/2".
[18] Certified for sizes 25 mm x 20 mm, 32 mm x 20 mm, 32 mm x 25 mm, 40 mm x 20 mm, 40 mm x
     25 mm, 40 mm x 32 mm, 50 mm x 25 mm, 50mm x 32 mm, 50 mm x 40 mm, 63 mm x 50 mm.
[19] Certified for sizes 160 mm.
[20] Certified for sizes 25 mm x 20 mm x 25 mm, 32 mm x 25 mm x 32 mm, 32 mm x 20 mm x 32 mm,
     40 mm x 32 mm x 40 mm, 40 mm x 25 mm x
     40 mm, 40 mm x 20 mm x 40 mm, 50 mm x 32 mm x 50 mm, 50 mm x 25 mm x 50 mm, 50 mm x 20
     mm x 50 mm, 63 mm x 50 mm x 63 mm, 63 mm
     x 40 mm x 63 mm, 63 mm x 32 mm x 63 mm, 63 mm x 25 mm x 63 mm.
[21] Certified for sizes 32 mm x 1/2" x 32 mm, 50 mm x 1/2" x 50 mm, 63 mm x 1/2" x 63 mm.
[22] Certified for sizes 20 mm, 25 mm, 32 mm, 40 mm, 50 mm, 63 mm.

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] 1/8" x 1/8" x 1/8" - 6" x 6" x 4"
[2] 1 1/4" x 1 1/4" x 1" - 12" x 12" x 10"
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] Certification does not include any additional fittings or gaskets.
[2] Use of this material may not be appropriate in all water chemistries. Copper tube may
    require corrosion control to limit the leaching of copper into drinking water under
    certain water chemistries. Refer to Informative Annex I-1.1 of NSF/ANSI/CAN 61 for the
    water quality considerations to be used before installing this product.
[3] The "A" prefix in the product trade names may be removed to denote domestic
    identification.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] Listed for the following sizes and configurations:
    EF Coupler
    1/2" CTS
    1/2" IPS
    3/4" CTS
    3/4" IPS
    1" CTS
    1" IPS
    1-1/4" CTS
    1-1/4" IPS
    2" IPS
    3" IPS
    4" IPS
    4" DIPS
    6" IPS
    6" DIPS
    8" IPS
    8" DIPS
    10" IPS
    10" DIPS
    12" IPS
    12" DIPS
    14" IPS
    16" IPS
    16" DIPS
    EF 90° ELBOW
    1" CTS
    1" IPS
    2" IPS
    4" IPS
    6" IPS
    8" IPS
    10" IPS
    12" IPS
    14" IPS
    16" IPS
    EF 45° ELBOW
    2" IPS
    4" IPS
    6" IPS
    8" IPS
    10" IPS
    12" IPS
    14" IPS
    16" IPS
    EF 22.5° ELBOW
    2" IPS
    4" IPS
    6" IPS
    8" IPS
    10" IPS
    12" IPS
    14" IPS
    16" IPS
    EF TEE
    3/4" IPS
    3/4" CTS
    1" IPS
    1" CTS
    2" IPS
    4" IPS x 2" IPS
    4" IPS x 4" IPS
    6" IPS x 4" IPS
    6" IPS x 6" IPS
    8" IPS x 4" IPS
    8" IPS x 6" IPS
    8" IPS x 8" IPS
    EF ENDCAP
    1" CTS
    1" IPS
    2" IPS
    3" IPS
    4" IPS
    6" IPS
    8" IPS
    10" IPS
    12" IPS
    14" IPS
    16" IPS
    EF REDUCER
    3/4" IPS x 1/2" CTS
    1" CTS x 3/4" CTS
    1" IPS x 1/2" CTS
    1" IPS x 3/4" IPS
    2" IPS x 1-1/4" CTS
    4" x 2" IPS
    6" x 2" IPS
    6" x 4" IPS
    8" x 2" IPS
    8" x 4" IPS
    8" x 6" IPS
    12" x 4"
    12" x 6" IPS
    12" x 8" IPS
    EFXBF ADAPTER
    1" CTS x 1/2" CTS
    1" CTS x 1/2" IPS
    1" IPS x 1/2"CTS
    1" IPS x 1/2" IPS
    1/2" CTS
    1/2" IPS
    3/4" CTS
    3/4" IPS
    1" CTS
    1" IPS
    1-1/4" CTS
    1-1/4" IPS
    2" IPS
    BF 22.5° ELBOW
    12" IPS
    16" IPS
    BF 45° ELBOW
    12" IPS
    16" IPS
    BF 90° ELBOW
    12" IPS
    16" IPS
    BF ENDCAP
    12" IPS
    16" IPS
    BF TEE
    12" IPS x 4" IPS
    12" IPS x 6" IPS
    12" IPS x 8" IPS
    12"I PS x 12" IPS
    16" IPS x 4" IPS
    16" IPS x 6" IPS
    16" IPS x 8" IPS
    16" IPS x 12" IPS
    16" IPS x 16" IPS
    BF REDUCER
    16" IPS x 12" IPS
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] This product may be marked with an alternate trade name: Douglas Barkwick Inc.
[2] Only products bearing the NSF Mark on the product, product packaging, and/or
    documentation shipped with the product are Certified.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.
[372] Product also complies with NSF/ANSI 372

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] One or a combination of these suffixes can be used with each part number.
    -2      - Cup to fit
    -2-2    - Fit to fit
    BH      - Bull head
    C       - Close ruff on elbows only
    C       - Cup on all but elbows
    F       - Fit or female
    HE      - Heat exchanges
    L or LT - Long turn
    M       - Male or medium turn
    MT      - Medium turn
    NH      - No hub
    NS      - No stop
    R       - Reducer
    RS      - Roll stop
    T       - Test cap
[2] Certified for sizes:
    3/4" x 1/2"
    1" x 1/2"
    1" x 3/4"
    1 1/4" x 1/2"
    1 1/4" x 3/4"
    1 1/4" x 1"
    1 1/2" x 1/2"
    1 1/2" x 3/4"
    1 1/2" x 1"
    1 1/2" x 1 1/4"
    2" x 1/2"
    2" x 3/4"
    2" x 1"
    2" x 1 1/4"
    2" x 1 1/2"
    
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] This fitting is also listed for sizes 25 mm- 110 mm
[2] Configurations include:
    Bushing Sch 40
    3” x 1 1/2”
    3” x 2”
    4”x 2”
    4” x 3”
    4” x 110 mm
    6” x 4”
    8” x 6”
    Coupling Sch 40
    1/2”
    3/4”
    1”
    1 1/2”
    2”
    3”
    4”
    6”
    8”
    Coupling Reducer Sch 40
    4” x 2”
    4” x 110 mm
    6” x 4”
    Cap Sch 40
    1/2”
    3/4”
    1”
    1 1/2”
    3”
    4”
    6”
    8”
    Elbow Sch 40 45°
    1/2”
    3/4”
    1”
    2”
    3”
    4”
    6”
    8”
    Elbow Sch 40 90°
    1/2”
    3/4”
    1”
    2”
    3”
    4”
    6”
    8”
    Elbow Sch 40 w/ Door
    4”
    Male Adapter Sch 40
    1/2”
    3/4”
    1”
    4”
    P-Trap Sch 40
    3”
    4”
    Tee Cross Sch 40
    4”
    Tee Sch 40 w/ Door
    4”
    Tee Reducer Sch 40
    3/4” x 1/2”
    1” x 1/2”
    1” x 3/4”
    6” x 4”
    Tee Sch 40
    1/2”
    3/4”
    1”
    2”
    3”
    4”
    6”
    8”
    Tee Sanitary Sch 40
    4”
    Wye Sch 40
    4”
    6”
    Wye Reducer Sch 40
    4” x 2”
    6” x 4”
    Bushing Sch 80
    2” x 2 1/2”
    3” x 1 1/2”
    3” x 2”
    3” x 2 1/2”
    4” x 2”
    4”x 2 1/2”
    4” x 3”
    6” x 4”
    8” x 6”
    Coupling Sch 80
    1/2”
    3/4”
    1”
    1 1/2”
    2”
    2 1/2”
    3”
    4”
    6”
    Cap Sch 80
    1/2”
    3/4”
    1”
    1 1/4”
    1 1/2”
    2”
    3”
    4”
    6”
    8”
    Elbow Sch 80 45°
    1/2"
    3/4”
    1”
    1 1/2”
    2”
    2 1/2”
    3”
    4”
    6”
    Elbow Sch 80 90°
    1/2”
    3/4”
    1”
    1 1/2”
    2”
    2 1/2”
    3”
    4”
    6”
    Tee Sch 80
    1/2”
    3/4”
    1”
    1 1/2”
    2”
    3”
    4”
    6”
    6” x 4”
    Male Adapter Sch 80
    1/2”
    3/4”
    1”
    1 1/2"
    2"
[4] Also certified for sizes 25 mm - 200mm
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] Certified for 304L, 316L and 2205 stainless steel.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] Only products bearing the NSF Mark on the product, product packaging, and/or
    documentation shipped with the product are Certified.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] Only products bearing the NSF Mark on the product, product packaging, and/or
    documentation shipped with the product are Certified.
[2] The EP-55 rubber ring can be used with Fiberstrong products with a minimum diameter of
    300 mm and greater. 
     Fiberstrong products with a diameter less than 300 mm may be only joined by wrap joint.
[3] Mix ratio of Wavistrong EASY-FIT Adhesive is 4:1 by weight (resin: hardener). Minimum
    cure time/temperaure is 125C for 1 hour.
    Mix ratio of Wavistrong EASY-FIT Adhesive 2203-A+B is 4:1 by weight (resin: hardener).
    Minimum cure time/temperaure is 125C for 1 hour.

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

* Trade name may include the following:
  CB  - Custom Bag
  BG# - Bag (with # of fittings in bag)

[1] Only products bearing the NSF Mark on the product, product packaging, and/or 
    documentation shipped with the product are Certified.
[Pb] Product also evaluated and determined to possess weighted average lead content of
     <=0.25% and complies with lead content requirements for “lead free” plumbing as defined
     by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking
     Water Act.

[1] Certification does not include o-rings or gaskets.

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] Certifion does not include O-rings.

[1] Certified for custom fabricated stainless steel 304/304L pipes, fittings, pipe spools,
    or fabricated assemblies, welded by using approved procedures for GTAW, or GTAW/GMAW,
    and cleaning procedures associated with ASTM A380.
[2] Each configuration is available in the following sizes:
    SS GROOVE X FIP REDUCER 
    2 ½” x 2”
[3] Each configuration is available in the following sizes:
    SS GROOVE X FIP TEE 
    2 x 1" 
    2 x 1 ½" 
    2 ½” x 1” 
    3” x 1” 
    4” x 1” 
    6” x 1” 
    2 ½” x 2” 
    3” x 2” 
    4” x 2” 
    6” x 2” 
[4] Each configuration is available in the following sizes:
    SS GROOVED FLANGE 
    2” 
    2 ½” 
    3” 
    4” 
    6” 

[1] # indicates SDR (Standard Dimension Ratio):
    7, 9, 11, 13.5, 15.5, 17, 19, 21, 26, 32.5
    
    XX indicates size in inches
    
    XXXX indicates size such as 20x18 = 2018, etc.
    
    B indicates internal dimension.
[2] The following non-wetted flange/backup rings can be used with the HDPE Flange
    Adapter(HDPE-SDR#-XX) and Stub Ends (SE-SDR#-XX):
    Stainless steel flange/backup ring SS316-SDR#-XX
    # indicates SDR (Standard Dimension Ratio): 7, 13.5, 21, 26, and 52
    XX indicates size: 2" - 63"
    Convoluted flange/backup ring BUP-SDR#-XX
    # indicates SDR (Standard Dimension Ratio): 7, 9, 9.3, 11, 13.5, 17, 19, 21, 26 and 51
    XX indicates size: 2" - 63"
    Polypropylene encapsulated ductile iron flange/backup ring PPDI-SDR#-XX
    # indicates SDR (Standard Dimension Ratio): 7 and 13.5
    XX indicates size: 2" - 63"
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] FRIALEN Brands
[2] Certification also include metric sizes for the following:
    Electrofusion Coupler - 20 – 75 mm
    Electrofusion Reducer - 25 x20 - 63x50 mm
    Electrofusion Tee with Spigot Outlet - 20 - 75 mm
[3] Certification includes the following:
    
    Elbow
    FRIALEN Elbow Sizes 1”, 1-1/4”, 2”, 4
    
    Spigot
    FRIALEN Tee (with Spigot outlet) Sizes 1", 1-1/4", 2", 4"
    
    End Cap
    FRIALEN End Cap Sizes 1", 1-1/4", 2", 4"
    
    Coupler
    E/F COUPLER 1-1/2" IPS
    E/F COUPLER 1-1/4" IPS
    E/F COUPLER 1/2" CTS
    E/F COUPLER 3/4" IPS
    E/F COUPLER 1" CTS
    E/F COUPLER 1" IPS
    E/F COUPLER 2" IPS
    E/F Coupler d20mm
    E/F Coupler d25mm
    E/F Coupler d32mm
    E/F Coupler d40mm
    E/F Coupler d50mm
    E/F Coupler d63mm
    E/F Coupler d75mm
    
    Reducer
    E/F REDUCER 1"CTS X 1/2" CTS
    E/F REDUCER 1"CTS X 3/4" IPS
    E/F REDUCER 1"IPS X 1"CTS
    E/F REDUCER 3/4" IPS X 1/2" CTS
    E/F REDUCER 2" IPS X 1-1/4" IPS
    E/F Reducer 25mm X 20mm
    E/F Reducer 32 X 20mm
    E/F Reducer 32 X 25mm
    E/F Reducer 40 X 32mm
    E/F Reducer 50 X 40mm
    E/F Reducer 63 X 32mm
    E/F Reducer 63 X 40mm
    E/F Reducer 63 X 50mm
    
    Elbow 90°
    E/F Elbow W90°d20mm
    E/F Elbow W90°d25mm
    E/F Elbow W90°d32mm
    E/F Elbow W90°d40mm
    E/F Elbow W90°d50mm
    E/F Elbow W90°d63mm
    E/F Elbow W90°d75mm
    
    Elbow 45°
    E/F Elbow W45°d25mm
    E/F Elbow W45°d32mm
    E/F Elbow W45°d40mm
    E/F Elbow W45°d50mm
    E/F Elbow W45°d63mm
    E/F Elbow W45°d75mm
    
    Tee
    E/F Tee 20mm
    E/F Tee 25mm
    E/F Tee 32mm
    E/F Tee 40mm
    E/F Tee 50mm
    E/F Tee 63mm
    E/F Tee 75mm
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] Only products bearing the NSF mark are Certified.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] (XX) refers to the size of tube, nipple or tread; 12(1/2"), 14(1/4"), 51(5/16"),
    38(3/8"), 31(3/16"), 34(3/4"), 71(7/16")
[2] (YY) refers to a color of fitting; G - Gray, W - White, N - Natural
    (ZZ) refers to a color of collet; 01 (same color with body), 02 (red), 03 (blue) are
    given when all of collets' color are identical/collets with different colors are used,
    following numbers are given; 1 (Gray), 2 (Red), and 3 (Blue)
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] AA refers to the size of the equal fittings, where AA may be 02 (1/8"), 04 (1/4"), 06
    (3/8"), 08 (1/2"), 12 (3/4"), 16 (1"), 20 (1 1/4"), 24 (1 1/2"), 32 (2"), 40 (2 1/2"),
    48 (3"), 64 (4"), 80 (5"), or 96 (6"). BB and CC refer to the ends of bushing and
    reducing couplings, where BB and CC may be 02 (1/8"), 04 (1/4"), 06 (3/8"), 08 (1/2"),
    12 (3/4"), 16 (1"), 20 (1 1/4"), 24 (1 1/2"), 32 (2"), 40 (2 1/2"), 48 (3"), or 64 (4").
    DD, EE, and FF refer to the end of the reducing tees, where DD, EE, and FF may be 06
    (3/8"), 08 (1/2"), 12 (3/4"), 16 (1"), 20 (1 1/4"), 24 (1 1/2") or 32 (2").
[2] Use of this material may not be appropriate in all water chemistries. Copper (tube,
    pipe, or fitting) may require corrosion control to limit the leaching of copper into
    drinking water under certain water chemistries. Refer to informative Annex I-6.1 of
    NSF/ANSI/CAN 61 for water quality considerations to be used before installing this
    product.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] XXX refers to the size of equal fittings, where XXX may be 013 (1/8"), 025 (1/4”), 037
    (3/8”), 050 (1/2”), 075 (3/4”), 100 (1”), 125 (1 1/4”), 150 (1 1/2”), 200 (2”), 250 (2
    1/2”), 300 (3”), 400 (4”), 500 (5”), 600 (6”), or 800 (8”).
    YY and ZZ refer to the ends of bushings and reducing couplings, where YY and ZZ may be
    01 (1/8”), 02 (1/4”), 03 (3/8”), 04 (1/2”), 05 (3/4”), 06 (1”), 07 (1 1/4”), 08 (1
    1/2”), 09 (2”), 10 (2 1/2”), 11 (3”) or 12 (4”).
    T, U and V refer to the ends of reducing tees, where T may be 4 (3/4”), 5 (1”), 6 (1
    1/4”) or 8 (2”), U may be 2 (3/8”), 3 (1/2”), 4 (3/4”), 5 (1”), 6 (1 1/4”) or 8 (2”) and
    V may be 3 (1/2”), 4 (3/4”), 5 (1”) or 6 (1 1/4”). 
    LL refers to Low Lead.
    S refers to “Modified” Commercial Sweat Flange.
[2] Use of this material may not be appropriate in all water chemistries.  Copper (tube,
    pipe, or fitting) may require corrosion control to limit the leaching of copper into
    drinking water under certain water chemistries.  Refer to Informative Annex I-6.1 of
    NSF/ANSI/CAN 61 for water quality considerations to be used before installing this
    product.
[3] Sizes for Brass Reducing Tees 55TUVLL include 3/4 x 3/8 x 3/4 - 2 x 2 x 1.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] Certified for gray and tan fittings.
[2] Certified for white or gray fittings.

# Figure numbers may have one of the following optional prefixes used to identify retail
  packaging requirements: UCP, U, UTP, USP, UPP, UP, UMP, UHP, UBP, PP, MPP, CP, MCP, C,
  CS, MCC, CL or CLC.
[1] These fittings may have an optional "R" suffix indicating reducer or "BH" indicating
    Bulk Head.
[2] May also include one of the following prefixes: UCP, U, UTP, USP, UPP, UP, UMP, UHP,
    UBP, PP, MPP, CP, MCP, C, CS, MCC, CL or CLC.
[3] May also include a '9' prefix.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.