NSF Product and Service Listings

[1] Colors: Dark Green
    Number of Coats: 1
    Maximum Field Use Dry Film Thickness (in mils): 50
    Maximum thinner: None
    Final Cure Time and Temperature: 6233W 4G: 30-45 seconds at 450°F; 6233W 8G: 60-90
    seconds at 450°F; 6233W 11G: 90-120 seconds at 450°F
    Special Comments: Preheat part to 425° - 488° F before application of powder.
[2] Number of Coats: 1
    Maximum Field Use Dry Film Thickness (in mils): 60
    Final Cure Time and Temperature: 206N: 10 minutes at 400°F; 206N Extra LG: 16 minutes at
    400°F; 206N Fluid Bed: 10 minutes at 400°F; 206N Long Gel: 10 minutes at 400°F
[4] Number of Coats: 1
    Sequence of Coats: N/A
    Maximum Field Use Dry Film Thickness (in mils): 60
    Maximum Thinner: None
    Final Cure Time and Temperature: 25 minutes at 425° F
[5] Certified for a maximum surface area to volume ratio of 122.1 sq. in./L for pump end use.

[1] Colors: Dark Green
    Number of Coats: 1
    Maximum Field Use Dry Film Thickness (in mils): 50
    Maximum thinner: None
    Final Cure Time and Temperature: 6233W 4G: 30-45 seconds at 450°F; 6233W 8G: 60-90
    seconds at 450°F; 6233W 11G: 90-120 seconds at 450°F
    Special Comments: Preheat part to 425° - 488° F before application of powder.
[2] Number of Coats: 1
    Maximum Field Use Dry Film Thickness (in mils): 60
    Final Cure Time and Temperature: 206N: 10 minutes at 400°F; 206N Extra LG: 16 minutes at
    400°F; 206N Fluid Bed: 10 minutes at 400°F; 206N Long Gel: 10 minutes at 400°F
[4] Number of Coats: 1
    Sequence of Coats: N/A
    Maximum Field Use Dry Film Thickness (in mils): 60
    Maximum Thinner: None
    Final Cure Time and Temperature: 25 minutes at 425° F
[5] Certified for a maximum surface area to volume ratio of 122.1 sq. in./L for pump end use.

[2] Number of Coats: 1
    Maximum Field Use Dry Film Thickness (in mils): 60
    Final Cure Time and Temperature: 206N: 10 minutes at 400°F; 206N Extra LG: 16 minutes at
    400°F; 206N Fluid Bed: 10 minutes at 400°F; 206N Long Gel: 10 minutes at 400°F
[3] Certified for a maximum surface area to volume ratio of 122.1 sq. in./L. for pump end
    use.
[4] Number of Coats: 1
    Sequence of Coats: N/A
    Maximum Field Use Dry Film Thickness (in mils): 60
    Maximum Thinner: None
    Final Cure Time and Temperature: 25 minutes at 425° F
[5] Certified for a maximum surface area to volume ratio of 122.1 sq. in./L for pump end use.

[2] Number of Coats: 1
    Maximum Field Use Dry Film Thickness (in mils): 60
    Final Cure Time and Temperature: 206N: 10 minutes at 400°F; 206N Extra LG: 16 minutes at
    400°F; 206N Fluid Bed: 10 minutes at 400°F; 206N Long Gel: 10 minutes at 400°F
[4] Number of Coats: 1
    Sequence of Coats: N/A
    Maximum Field Use Dry Film Thickness (in mils): 60
    Maximum Thinner: None
    Final Cure Time and Temperature: 25 minutes at 425° F

[1] Colors: Dark Green
    Number of Coats: 1
    Maximum Field Use Dry Film Thickness (in mils): 50
    Maximum thinner: None
    Final Cure Time and Temperature: 6233W 4G: 30-45 seconds at 450°F; 6233W 8G: 60-90
    seconds at 450°F; 6233W 11G: 90-120 seconds at 450°F
    Special Comments: Preheat part to 425° - 488° F before application of powder.
[2] Number of Coats: 1
    Maximum Field Use Dry Film Thickness (in mils): 60
    Final Cure Time and Temperature: 206N: 10 minutes at 400°F; 206N Extra LG: 16 minutes at
    400°F; 206N Fluid Bed: 10 minutes at 400°F; 206N Long Gel: 10 minutes at 400°F
[4] Number of Coats: 1
    Sequence of Coats: N/A
    Maximum Field Use Dry Film Thickness (in mils): 60
    Maximum Thinner: None
    Final Cure Time and Temperature: 25 minutes at 425° F
[5] Certified for a maximum surface area to volume ratio of 122.1 sq. in./L for pump end use.

[1] Product also complies with NSF/ANSI 372.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] Only products bearing the NSF Mark on the product, product packaging, and/or
    documentation shipped with the product are Certified.
[2] Certified for mechanical seals for use with pump shafts ranging from 1" - 12" in
    diameter.  Certified for equivalent metric sizes.
[3] Certified for use as a packing material in pumps with shaft diameters >= 0.625".
[4] Certified for mechanical seals for use with pump shafts ranging from 16-110 mm in
    diameter.
[5] Certified for mechanical seals for use with pump shafts ranging from 1"-8" in diameter.
    Certified
    for equivalent metric sizes.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.
[Q] This product meets the reduced Q test statistic criteria of 1 µg or 0.5 µg for lead per
    Section 9.5.1.1 of NSF/ANSI/CAN 61.

[2] This product does not require a Q statistic. It is made from material or materials that
    do not require lead analysis when reviewed per NSF/ANSI/CAN Standard 61, Section 3.3.
[Q] This product meets the reduced Q test statistic criteria of 1 µg or 0.5 µg for lead per
    Section 9.5.1.1 of NSF/ANSI/CAN 61.

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.
[Q] This product meets the reduced Q test statistic criteria of 1 µg or 0.5 µg for lead per
    Section 9.5.1.1 of NSF/ANSI/CAN 61.

[1] MFC - are models with capped outlets
    MFO - are models without capped outlets
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] FEW XYZ A
    X - Type of electronics
        4 - AquaMaster
        5 - WaterMaster
    Y - Tier of Electronics
        1 - Standard Electronics
        3 - Advanced Electronics
        5 - Premium Electronics
    Z - Type of mounting
        1 - Integral with transmitter
        2 - Remote with transmitter (Sensor + Transmitter)
        8 - Sensor only

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] Certified for product with the following densities and reaction speeds:
    2 pounds per cubic foot (regular speed)
    2 pounds per cubic foot (fast speed)
    3 pounds per cubic foot (regular speed)
    3 pounds per cubic foot (fast speed)
    4 pounds per cubic foot (slow speed)
    4 pounds per cubic foot (regular speed)
    4 pounds per cubic foot (fast speed)
    5 pounds per cubic foot (regular speed)
    6 pounds per cubic foot (regular speed)
    
    Mix ratio is 1:1 (A:B) by volume or 8.1:6.9 (A:B) by weight.
    Minimum cure time is 60 minutes at ambient temperatures.
[2] Certified for a maximum surface area to volume ratio of 0.375 square inches per liter.

[1] Certified for product with the following densities and reaction speeds:
    2 pounds per cubic foot (regular speed)
    2 pounds per cubic foot (fast speed)
    3 pounds per cubic foot (regular speed)
    3 pounds per cubic foot (fast speed)
    4 pounds per cubic foot (slow speed)
    4 pounds per cubic foot (regular speed)
    4 pounds per cubic foot (fast speed)
    5 pounds per cubic foot (regular speed)
    6 pounds per cubic foot (regular speed)
    
    Mix ratio is 1:1 (A:B) by volume or 8.1:6.9 (A:B) by weight.
    Minimum cure time is 60 minutes at ambient temperatures.
[2] Certified for a maximum surface area to volume ratio of 0.375 square inches per liter.

[1] Trade name may feature prefix "E" to denote product sold in Europe.
[2] Suffix denotes color for the outermost layer. Color codes are:
    BK - Black
    BL - Blue
    W  - White
    G  - Light Grey
    GR - Green
    DG - Dark Grey
    R  - Red
[3] YYY denotes color for the outermost layer. Color codes are:
    BLK  - Black
    BLU  - Blue
    DGRY - Dark Gray
    GRN  - Green
    LGRY - Light Gray 
    RED  - Red
    WHT  - White
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] Certified for the following tank/component combinations:
    3/4" fittings/fitting gaskets shall only be used with tanks greater than or equal to 2.8
    gallons.
    1" fittings/fitting gaskets shall only be used with tanks greater than or equal to 3
    gallons.
    1-1/4" and 1-1/2" fittings/fitting gaskets shall only be used with tanks greater than or
    equal to 4 gallons.
    2" fittings/fitting gaskets shall only be used with tanks greater than or equal to 5
    gallons.
    3" fittings/fitting gaskets shall only be used with tanks greater than or equal to 95
    gallons.
    Siphon tubes shall only be used with tanks greater than or equal to 5 gallons.
[2] The trade names include product information represented by alphanumeric code, denoted as
    follows:										
    XXXX, XXXXX, XXXXXX: Tank volume in gallons (2.8 gallons and greater)										
    YY, YYY, YYYY diameter/width of tank in inches										
    QQ: Customer code										
    Z: Can be S (sump) or W (no sump)										
    UU: Can be RT (Rectangular Tank), SQ (Square Tank), 2P (2in lid), 5N (5 in lid), or any
    other two alphabetical code (customer code)										
    VVVVV: Part number										
    #: Lid size in inches.

[1] Certified for use as an anchoring adhesive for installing thread rods (less than or
    equal to 1.3 inches in diameter) in concrete or masonry for water treatment applications.

[1] Certified for use as an anchoring adhesive for installing threaded rods (less than or
    equal to 6 mm - 36 mm or 1/4" - 1-3/8" in diameter) in concrete for water treatment
    applications.

[1] Certified for use as an anchoring adhesive for installing thread rods (less than or
    equal to 1.3 inches in diameter) in concrete or masonry for water treatment applications.

[1] Certified for 1/8" thick flange insulating gaskets.

[1] Copper tube (Alloy C12200) is Certified by NSF to NSF/ANSI/CAN 61 for use in drinking
    water supplies of pH 6.5 and above. Drinking water supplies that are less than pH 6.5
    may require corrosion control to limit leaching of copper into the drinking water.
[2] Only products bearing the NSF Mark on the product, product packaging, and/or
    documentation shipped with the product are Certified.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] Use of this material may not be appropriate in all water chemistries. Copper (tube,
    pipe, or fitting) may require corrosion control to limit the leaching of copper into
    drinking water under certain water chemistries. Refer to Informative Annex I-6.1 of
    NSF/ANSI/CAN 61 for water quality considerations to be used before installing this
    product.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] Certified for a minimum daily flow 40,000 liters (AKUALYS ASM), 80,000 (AKUALYS AGM),
    86,400 liters (AKUALYS APM 80T)and 90,000 liters (AKUALYS APM 80)and 97,200 liters
    (AKUALYS APM 90T).
[2] Membranes should be flushed with tap water before being placed into service at the
    following rates:
    AKUALYS ASM at 25 liters per minute for 240 minutes.
    AKUALYS AGM at 50 liters per minute for 240 minutes.
    AKUALYS APM at 57 liters per minute for 240 minutes.
    AKUALYS APM 80T at 60 liters per minute for 240 minutes.
    AKUALYS APM 90T at 68 liters per minute for 240 minutes.

[1] Only products bearing the NSF Mark on the product, product packaging, and/or
    documentation shipped with the product are Certified.
[2] Certified for the following configurations: PN16, SDR11, and 20 mm - 315 mm.
[3] Certified for the following configurations: PN16, SDR11, and 90 x 63 mm - 315 x 250 mm.
[4] The following sizes/models are certified:
    2"
    PN10/SDR17
    PN16/SDR11
    PN20/SDR9
    PN25/SDR7
    3"
    PN10/SDR17
    PN16/SDR11
    PN20/SDR9
    PN25/SDR7
    4"
    PN10/SDR17
    PN16/SDR11
    PN20/SDR9
    PN25/SDR7
    6"
    PN10/SDR17
    PN16/SDR11
    PN20/SDR9
    PN25/SDR7
    8"
    PN10/SDR17
    PN16/SDR11
    PN20/SDR9
    PN25/SDR7
    10"
    PN10/SDR17
    PN16/SDR11
    PN20/SDR9
    PN25/SDR7
    12"
    PN10/SDR17
    PN16/SDR11
    PN20/SDR9
    PN25/SDR7

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] MBI - MB is the FRIATEC identification for a coupler with a removable stop, I indicates
    inch size.
[2] MRI - MR is the FRIATEC identification for an e/f reducer, I indicates inch size.
[3] UBI - UB is the FRIATEC identification for a coupler without a stop, I indicates inch
    size.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[4] Size - The first number refers to the diameter of the host pipe and the second number
    refers to the diameter of the outlet.
[5] TL - FRIATEC pneumatic Top-Loading tool required.
[6] Dimensions given in brackets, e.g. SA-TL d(10-22) x 3:
    This saddle fitting can be fused on a main pipe of a size which is between and including
    10 to 22 inch. 3 inch indicates the size of the outlet. 
    The dimension indication "(xx-yy)" is only possible for saddles.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[4] Size - The first number refers to the diameter of the host pipe and the second number
    refers to the diameter of the outlet.
[5] TL - FRIATEC pneumatic Top-Loading tool required.
[6] Dimensions given in brackets, e.g. SA-TL d(10-22) x 3:
    This saddle fitting can be fused on a main pipe of a size which is between and including
    10 to 22 inch. 3 inch indicates the size of the outlet. 
    The dimension indication "(xx-yy)" is only possible for saddles.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] INNOGAZ and FRIALEN Brands
[2] Certification also include metric sizes for the following:
    Electrofusion Coupler - 20 – 75 mm
    Electrofusion Reducer - 25 x20 - 63x50 mm
    Electrofusion Tee with Spigot Outlet - 20 - 75 mm
[3] Certification includes the following:
    
    Elbow
    FRIALEN Elbow Sizes 1”, 1-1/4”, 2”, 4
    
    Spigot
    FRIALEN Tee (with Spigot outlet) Sizes 1", 1-1/4", 2", 4"
    
    End Cap
    FRIALEN End Cap Sizes 1", 1-1/4", 2", 4"
    
    Coupler
    E/F COUPLER 1-1/2" IPS
    E/F COUPLER 1-1/4" IPS
    E/F COUPLER 1/2" CTS
    E/F COUPLER 3/4" IPS
    E/F COUPLER 1" CTS
    E/F COUPLER 1" IPS
    E/F COUPLER 2" IPS
    E/F Coupler d20mm
    E/F Coupler d25mm
    E/F Coupler d32mm
    E/F Coupler d40mm
    E/F Coupler d50mm
    E/F Coupler d63mm
    E/F Coupler d75mm
    
    Reducer
    E/F REDUCER 1"CTS X 1/2" CTS
    E/F REDUCER 1"CTS X 3/4" IPS
    E/F REDUCER 1"IPS X 1"CTS
    E/F REDUCER 3/4" IPS X 1/2" CTS
    E/F REDUCER 2" IPS X 1-1/4" IPS
    E/F Reducer 25mm X 20mm
    E/F Reducer 32 X 20mm
    E/F Reducer 32 X 25mm
    E/F Reducer 40 X 32mm
    E/F Reducer 50 X 40mm
    E/F Reducer 63 X 32mm
    E/F Reducer 63 X 40mm
    E/F Reducer 63 X 50mm
    
    Elbow 90°
    E/F Elbow W90°d20mm
    E/F Elbow W90°d25mm
    E/F Elbow W90°d32mm
    E/F Elbow W90°d40mm
    E/F Elbow W90°d50mm
    E/F Elbow W90°d63mm
    E/F Elbow W90°d75mm
    
    Elbow 45°
    E/F Elbow W45°d25mm
    E/F Elbow W45°d32mm
    E/F Elbow W45°d40mm
    E/F Elbow W45°d50mm
    E/F Elbow W45°d63mm
    E/F Elbow W45°d75mm
    
    Tee
    E/F Tee 20mm
    E/F Tee 25mm
    E/F Tee 32mm
    E/F Tee 40mm
    E/F Tee 50mm
    E/F Tee 63mm
    E/F Tee 75mm

[1] XX:Length
    10 = 10"
    20 = 20"
    30 = 30"
    40 = 40"
    50 = 50"
    60 = 60"
    70 = 70"
    
    YY: Pore Size
    1=1 m
    2=2 m
    3=3 m
    5=5 m
    7=7 m
    10=10 m
    15=15 m
    20=20 m
    25=25 m
    30=30 m
    40=40 m
    50=50 m
    
    10" models are certified for a minimum daily permeate generation of 1,000 liters for use
    in public water treatment facilities. 
    20" models are certified for a minimum daily permeate generation of 2,000 liters for use
    in public water treatment facilities. 
    30" models are certified for a minimum daily permeate generation of 3,000 liters for use
    in public water treatment facilities.
    40" models are certified for a minimum daily permeate generation of 4,000 liters for use
    in public water treatment facilities. 
    50" models are certified for a minimum daily permeate generation of 5,000 liters for use
    in public water treatment facilities. 
    60" models are certified for a minimum daily permeate generation of 6,000 liters for use
    in public water treatment facilities. 
    70" models are certified for a minimum daily permeate generation of 7,000 liters for use
    in public water treatment facilities.

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] XX and YY refer to the size in inches.
[2] Certified for use in distribution systems only.
[3] 2500 series valves are certified with the following optional connection types:
    (A)   - ALPHA
    (AX)  - ALPHA XL
    (F)   - Flanged (ANSI Class 125)
    (F2)  - Flanged (ANSI Class 250 with raised face)
    (F3)  - Flanged (PN16 with raised face)
    (F4)  - Flanged (PN16 with flat face)
    (FB)  - Flanged (ANSI Class 250 with flat face)
    (FX)  - Flex Ring
    (MJ)  - Mechanical Joint
    (PO)  - Push-on
    (PVC) – PVC
    (RF)  - Flanged (ANSI Class 150 with raised face)
    (S)   - Threaded (NPT)
    (TM)  - Tapping flanged by mechanical joint
    (TYT) – Tyton
    
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] Trend and Pacer models are certified with the following optional end connections:
     - 4 inch mechanical joint
     - 6 inch mechanical joint
     - 6 inch mechanical joint for Dallas, Texas
     - 6 inch Class B mechanical joint
     - 8 inch mechanical joint
     - 6 inch flanged
     - 6 inch flanged with 2 inch NPT pipe plugs
     - 6 inch Tyton 
     - 6 inch plain end
     - 6 inch PVC
     - 6 inch vertical entry
     - 6 inch vertical entry for Traverse City TVC5
     - 6 inch ALPHA
     - 6 inch ALPHA XL
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[2] XX and YY refers to the size in inches.
[3] Certified for use in distribution systems only.
[4] 2500 and 3500 series valves are certified with the following optional connection types:
    (A)   - ALPHA
    (AX)  - ALPHA XL
    (F)   - Flanged (ANSI Class 125)
    (F2)  - Flanged (ANSI Class 250 with raised face)
    (F3)  - Flanged (PN16 with raised face)
    (F4)  - Flanged (PN16 with flat face)
    (FB)  - Flanged (ANSI Class 250 with flat face)
    (FX)  - Flex Ring
    (MJ)  - Mechanical Joint
    (PO)  - Push-on
    (PVC) – PVC
    (RF)  - Flanged (ANSI Class 150 with raised face)
    (S)   - Threaded (NPT)
    (TM)  - Tapping flanged by mechanical joint
    (TYT) – Tyton
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[3] XX refers to the size of the valve in inches and may be 03, 04, 06, 08, 10, 12, 14, or
    16.
[4] Certified for use in distribution systems only.
[5] 2100 series check valves are certified with the following optional connection types:
    - Flanged 
    - Mechanical Joint
    - Mechanical Joint Plain End
[6] XX and YY refer to the size in inches.
[7] 2500 and 3500 series valves are certified with the following optional connection types:
    (A)	  - ALPHA
    (AX)  - ALPHA XL
    (F)   - Flanged (ANSI Class 125)
    (F2)  - Flanged (ANSI Class 250 with raised face)
    (F3)  - Flanged (PN16 with raised face)
    (F4)  - Flanged (PN16 with flat face)
    (FB)  - Flanged (ANSI Class 250 with flat face)
    (FX)  - Flex Ring
    (MJ)  - Mechanical Joint
    (PO)  - Push-on
    (PVC) – PVC
    (RF)  - Flanged (ANSI Class 150 with raised face)
    (S)   - Threaded (NPT)
    (TM)  - Tapping flanged by mechanical joint
    (TYT) – Tyton
[8] The Swing Check Valve - Series 52 SC may use a "lever and weight" or "lever and spring"
    option.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] Product tradename may include HyperFusion
[2] Sizes may be identified in metric as follows:
    1 1/4" x 1" (40 mm x 32 mm)
    1 1/2" x 1" (50 mm x 32 mm)
    1 1/2" x 1 1/4" (50 mm x 40 mm)
    2" x 1" (63 mm x 32 mm)
    2" x 1 1/4" (63 mm x 40 mm)
    2" x 1 1/2" (63 mm x 50 mm)
    40 mm x 1 1/4"
    50 mm x 1 1/2" 
    63 mm x 2" 
    40 mm (1 1/4") x 1" 
    50 mm (1 1/2") x 1 1/4" 
    50 mm (1 1/2") x 1"
    63 mm (2") x 1 1/2"
    63 mm (2") x 1 1/4"

[1] Type test only, no factory production control audits conducted pursuant to Section 1.2
    of ISO Guide 65.
[2] (1) Filter
        I   - Industrial
    (2) Nominal particle removal rating (microns)
        005 - 0.5 micron
        010 - 1 micron
        050 - 5 micron
        100 - 10 micron
        200 - 20 micron
        250 - 25 micron
        500 - 50 micron
    (3) Media
        P   - Polypropylene
    (4) Cartridge length
        100 - 10.0"
        296 - 29 5/8"
        300 - 30"
        400 - 40"
    (5) Nominal diameter 
        S   - Standard (1.1" x 2.5")
        E   - Economy (1.1" x 2 3/8")
        L   - Large (1.1" x 3.0")
        X   - Special order
    (6) Core material
        1   - Polypropylene
        4   - 304 Stainless steel
        5   - 316 Stainless steel
    (8) Core type
        SD  - Standard
        XD  - Double o-ring
        XC  - Extended
        XX  - Special order
[3] Only cartridges 10" and longer have been reviewed and evaluated for Standard 61.  This
    product has not been reviewed or evaluated for point-of-use or point-of-entry
    applications.

[1] Products have a marking exemption which allow product NSF-61 Marking and labels bearing
    the <= 0.25%.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] The filtration level (micron) and color which are used in each SK filter and may be any
    of the following:
    10  - Light Blue
    20  – Grey
    40  - Purple
    55  – Green
    70  – Brown
    100 – Black
    130 – Red
    200 – Yellow
    400 – Blue
[2] The spring type may be any of the following alphabetic codes:
    HALAR    – HALAR Coating
    HSL      - Hastelloy
    LC       - Low Cost Energy
    LC-HALAR – Low-Cost Energy – HALAR Coating
    LCHSL    - Hastelloy-Low Cost Energy
    Regular (not indicated on product name)
[3] Inlet / outlet type may be any of the following:
    ARF - Flange
    Int - Integral
    Thr - Threaded
    Vic - Victaulic
[4] Certified for a minimum flow of 72,000 L/day.
[6] Certified for a minimum flow of 1,150,200 L/day.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] Product is certified for a minimum daily flow of 2,400,000 liters.
[2] These products have filtration levels of 10-800 microns.
[3] Certified for a minimum daily flow of 300,000 liters.
[4] Certified products are evaluated as POE systems.
[5] These products have filtration levels of 10-500 microns.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.
[11] Models EBS 10000 DW and EBS 15000 DW are certified for configurations O/L and I/L.

[6] Certified for a minimum daily flow of 144,000 liters.
[7] Certified for use in municipal water treatment plants only.
[8] Certified for 1-20 micron filters. Size is inlet/outlet diameter.
[9] Certified for a minimum daily flow of 900,000 liters.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.
[10] Certified for a minimum daily flow of 346,000 liters.

[1] Product requires a 12 hours flush at a flow rate of 10 liters per minute per square
    meter with pure water (RO production water).
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] Certified for a maximum of 1750 Kg of aggregate per cubic meter of concrete in a tank
    size of 500 gallons or greater.

[1] Fitting packaging is coded by the following convention:
    X indicates packaging:
    0 - Bulk pack
    1 - Blister pack
    3 - Single bag
    5 - Flag tagged
[2] Fitting sizes are coded by the following convention:
    XX, YY, and ZZ indicate size:
    02 - 1/8"
    03 - 3/16"
    04 - 1/4"
    05 - 5/16"
    06 - 3/8"
    08 - 1/2"
    10 - 5/8"
    12 - 3/4"
    14 - 7/8"
    16 - 1"
    24 - 1.5"
    32 - 2"
    40 - 2.5"
    48 - 3"
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] Fitting packaging is coded by the following convention:
     X indicates packaging:
      0 - Bulk pack
      1 - Blister pack
      3 - Single bag
      5 - Flag tagged
[2] Fitting sizes are coded by the following convention:
     XX, YY, and ZZ indicate size:
      02 - 1/8"
      03 - 3/16"
      04 - 1/4"
      05 - 5/16"
      06 - 3/8"
      08 - 1/2"
      10 - 5/8"
      12 - 3/4"
      14 - 7/8"
      16 - 1"
      24 - 1.5"
      32 - 2"
      40 - 2.5"
      48 - 3"
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] Certified for the following sizes: 0.3 mm - 6.0 mm.

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] Trade Name AFN-N8050D requires a pre-service flush at 4 gallons per minute (gpm) for 48
    hours with deionized or other purified water.
[2] Trade name AFN-N8050D is certified for a minimum daily permeate generation of 57,600
    liters for use in public water treatment facilities.

[3] Trade Name AFD-N1080 requires a pre-service flush at 6 gallons per minute (gpm) for 48
    hours with deionized or other purified water.
[4] Trade name AFD-N1080 is certified for a minimum daily permeate generation of 76,800
    liters for use in public water treatment facilities.

[1] Certified for a minimum daily flow of 21,804 L.
[2] (X) (Size) - 25, 5, 15, 20, 35, 40, 60, 80, 100, 120, 160, 200, 240, 280, 360, 400, or
    720
    (Y) - S (Basic) 
          SM (Monitor) 
          W (Manual wiper) 
          WM (Manual wiper, Monitor) 
          WMM (Manual wiper, Monitor, Alarm) 
          WA (Automatic wiper) 
          WAM (Automatic wiper, Monitor) 
          WAMM (Automatic wiper, Monitor, Alarm)
[3] (X) (Size) - 10, 15, 20, 35, 40, 60, 80, 100, 120, 160, 200, 240, 280, 360, 400, or 720 
    (Y) - S (Basic) 
          SM (Monitor) 
          W (Manual wiper) 
          WM (Manual wiper, Monitor) 
          WMM (Manual wiper, Monitor, Alarm) 
          WA (Automatic wiper) 
          WAM (Automatic wiper, Monitor) 
          WAMM (Automatic wiper, Monitor, Alarm)
[4] (X) (Size) - 10, 15, 20, 35, 40, 60, 80, 100, 120, 160, 200, 240, 280, 360, 400, or 720 
    (Y) - S (Basic) 
          SM (Monitor) 
          W (Manual wiper) 
          WM (Manual wiper, Monitor) 
          WMM (Manual wiper, Monitor, Alarm) 
          WA (Automatic wiper) 
          WAM (Automatic wiper, Monitor) 
          WAMM (Automatic wiper, Monitor, Alarm)
[5] (X) (Size) - 7, 15, 30, or 50 
    (Y) - S (Basic) 
          SM (Monitor) 
          WM (Manual wiper, Monitor) 
          WMM (Manual wiper, Monitor, Alarm) 
          Alarm (Alarm only)
[6] (X) (Size) - 7 or 10 
    (Y) - S (Basic)
[7] (X) (Size) - 10, 15, 20, 35, 80, 100, 120, 40L, 60L, 80L, 100L, or 120L 
    (Y) - S (Basic) 
          SM (Monitor) 
          W (Manual wiper) 
          WM (Manual wiper, Monitor) 
          WMM (Manual wiper, Monitor, Alarm) 
          WA (Automatic wiper) 
          WAM (Automatic wiper, Monitor) 
          WAMM (Automatic wiper, Monitor, Alarm)
[8] (X) (Size) - 1564, 2035, 2064, 2516, 2535, or 2564 
    (Y) - S (Basic)

[1] BSG 20 and BSG 20T are certified for a minimum flow of 72,000 gal./day.
[2] BSG 25 and BSG 25T are certified for a minimum flow of 122,400 gal./day.
[3] BSG 30 and BSG 30T are certified for a minimum flow of 182,880 gal./day.
[4] BSG 40 and BSG 40T are certified for a minimum flow of 338,400 gal.day.
[5] BSG 50 and BSG 50T are certified for a minimum flow of 537,120 gal./day.
[6] BSG 60 and BSG 60T are certified for a minimum flow of 802,080 gal.day.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] Certified for all sizes between 0.3 mm & 6.0 mm.

[1] Certified for the following sizes: 0.3 mm - 6.0 mm.

[1] XXX is used as a reference to the treatment capacity in liters per second.
[2] Certified for a minimum daily permeate generation of 10,500 L.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] The 4040 models are flushed for 24 hours at a rate of 17 liters per minute with DI
    water.
    The 4040 models are Certified for a minimum daily flow of 2,271 liters per day.
[2] The 8040 models are flushed for 24 hours at a rate of 200 liters per minute with DI
    water.
    The 8040 models are Certified for a minimum daily flow of 12,617 liters per day.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] Certified for the following minimum daily flow rates:
    Aquaporin Inside® CLEAR Ultra 4040 is certified for a minimum flow of 2,600 gallons per
    day.
    Aquaporin Inside® CLEAR Ultra 4040XL is certified for a minimum flow of 3,100 gallons
    per day.
    Aquaporin Inside® CLEAR Plus 4040 is certified for a minimum flow of 2,100 gallons per
    day.
    Aquaporin Inside® CLEAR Plus 4040XL is certified for a minimum flow of 2,500 gallons per
    day.
    Aquaporin Inside® CLEAR Plus FR 4040 is certified for a minimum flow of 1,800 gallons
    per day.
    Aquaporin Inside® CLEAR Plus FR 4040XL is certified for a minimum flow of 2,100 gallons
    per day.
    Aquaporin Inside® CLEAR Classic 4040 is certified for a minimum flow of 2,500 gallons
    per day.
    Aquaporin Inside® CLEAR Classic 4040XL is certified for a minimum flow of 2,900 gallons
    per day.
    Aquaporin Inside® CLEAR Eco 4040 is certified for a minimum flow of 2,800 gallons per
    day.
    Aquaporin Inside® CLEAR Eco 4040XL is certified for a minimum flow of 3,300 gallons per
    day.
[2] Filter elements require the following pre-service flush:
    Aquaporin Inside® CLEAR Ultra 4040 requires a 24 hour pre-service flush at a flow rate
    of 1.80 gallons per minute (gpm) with de-ionized water.
    Aquaporin Inside® CLEAR Ultra 4040XL requires a 24 hour pre-service flush at a flow rate
    of 2.15 gallons per minute (gpm) with de-ionized water.
    Aquaporin Inside® CLEAR Plus 4040 requires a 24 hour pre-service flush at a flow rate of
    1.46 gallons per minute (gpm) with de-ionized water.
    Aquaporin Inside® CLEAR Plus 4040XL requires a 24 hour pre-service flush at a flow rate
    of 1.74 gallons per minute (gpm) with de-ionized water.
    Aquaporin Inside® CLEAR Plus FR 4040 requires a 24 hour pre-service flush at a flow rate
    of 1.25 gallons per minute (gpm) with de-ionized water.
    Aquaporin Inside® CLEAR Plus FR 4040XL requires a 24 hour pre-service flush at a flow
    rate of 1.46 gallons per minute (gpm) with de-ionized water.
    Aquaporin Inside® CLEAR Classic 4040 requires a 24 hour pre-service flush at a flow rate
    of 1.74 gallons per minute (gpm) with de-ionized water.
    Aquaporin Inside® CLEAR Classic 4040XL requires a 24 hour pre-service flush at a flow
    rate of 2.01 gallons per minute (gpm) with de-ionized water.
    Aquaporin Inside® CLEAR Eco 4040 requires a 24 hour pre-service flush at a flow rate of
    2.29 gallons per minute (gpm) with de-ionized water.
    Aquaporin Inside® CLEAR Eco 4040XL requires a 24 hour pre-service flush at a flow rate
    of 1.80 gallons per minute (gpm) with de-ionized water.

[1] Certified for the following minimum daily flow rates:
    Aquaporin Inside® CLEAR Eco 8040-440 is certified for a minimum flow of 15,000 gallons
    per day.
    Aquaporin Inside® CLEAR Eco 8040-400 is certified for a minimum flow of 13,500 gallons
    per day.
    Aquaporin Inside® CLEAR Ultra 8040-440 is certified for a minimum flow of 13,500 gallons
    per day.
    Aquaporin Inside® CLEAR Ultra 8040-400 is certified for a minimum flow of 12,500 gallons
    per day.
    Aquaporin Inside® CLEAR Plus 8040-440 is certified for a minimum flow of 11,500 gallons
    per day.
    Aquaporin Inside® CLEAR Plus 8040-400 is certified for a minimum flow of 10,500 gallons
    per day.
    Aquaporin Inside® CLEAR Plus FR 8040-440 is certified for a minimum flow of 10,000
    gallons per day.
    Aquaporin Inside® CLEAR Plus FR 8040-400 is certified for a minimum flow of 9,000
    gallons per day.
    Aquaporin Inside® CLEAR Classic 8040-440 is certified for a minimum flow of 13,000
    gallons per day.
    Aquaporin Inside® CLEAR Classic 8040-400 is certified for a minimum flow of 12,000
    gallons per day.
[2] Filter elements require the following pre-service flush:
    Aquaporin Inside® CLEAR Eco 8040-440 requires a 24 hour pre-service flush at a flow rate
    of 10.42 gallons per minute (gpm) with de-ionized water.
    Aquaporin Inside® CLEAR Eco 8040-400 requires a 24 hour pre-service flush at a flow rate
    of 9.38 gallons per minute (gpm) with de-ionized water.
    Aquaporin Inside® CLEAR Ultra 8040-440 requires a 24 hour pre-service flush at a flow
    rate of 9.38 gallons per minute (gpm) with de-ionized water.
    Aquaporin Inside® CLEAR Ultra 8040-400 requires a 24 hour pre-service flush at a flow
    rate of 8.68 gallons per minute (gpm) with de-ionized water.
    Aquaporin Inside® CLEAR Plus 8040-440 requires a 24 hour pre-service flush at a flow
    rate of 7.99 gallons per minute (gpm) with de-ionized water.
    Aquaporin Inside® CLEAR Plus 8040-400 requires a 24 hour pre-service flush at a flow
    rate of 7.29 gallons per minute (gpm) with de-ionized water.
    Aquaporin Inside® CLEAR Plus FR 8040-440 requires a 24 hour pre-service flush at a flow
    rate of 6.94 gallons per minute (gpm) with de-ionized
    water.
    Aquaporin Inside® CLEAR Plus FR 8040-400 requires a 24 hour pre-service flush at a flow
    rate of 6.25 gallons per minute (gpm) with de-ionized water.
    Aquaporin Inside® CLEAR Classic 8040-440 requires a 24 hour pre-service flush at a flow
    rate of 9.03 gallons per minute (gpm) with de-ionized
    water.
    Aquaporin Inside® CLEAR Classic 8040-400 requires a 24 hour pre-service flush at a flow
    rate of 8.33 gallons per minute (gpm) with de-ionized
    water.

[1] Products require the following pre-service flush using tap water at a pressure not to
    exceed 50 psi:						
    Aquaporin Inside® CLEAR Ultra 4040,  Aquaporin Inside® CLEAR Ultra 4040XL require a
    pre-service flush at a flow rate of 4 GPM (gallons per minute) for 24 hours.
    Aquaporin Inside® CLEAR Ultra 8040-400,  Aquaporin Inside® CLEAR Ultra 8040-440 require
    a pre-service flush at a flow rate of 12 GPM (gallons per minute) for 24 hours.
    Aquaporin Inside® CLEAR Plus 4040,  Aquaporin Inside® CLEAR Plus 4040XL require a
    pre-service flush at a flow rate of 4 GPM (gallons per minute) for 24 hours.
    Aquaporin Inside® CLEAR Plus 8040-400,  Aquaporin Inside® CLEAR Plus 8040-440 require a
    pre-service flush at a flow rate of 12 GPM (gallons per minute) for 24 hours.
    Aquaporin Inside® CLEAR Plus FR 4040,  Aquaporin Inside® CLEAR Plus FR 4040XL require a
    pre-service flush at a flow rate of 4 GPM (gallons per minute) for 24 hours.
    Aquaporin Inside® CLEAR Plus FR 8040-400,  Aquaporin Inside® CLEAR Plus FR 8040-440
    require a pre-service flush at a flow rate of 12 GPM (gallons per minute) for 24 hours.
    Aquaporin Inside® CLEAR Classic 4040, Aquaporin Inside® CLEAR Classic 4040XL require a
    pre-service flush at a flow rate of 4 GPM (gallons per minute) for 24 hours.
    Aquaporin Inside® CLEAR Classic 8040-400,  Aquaporin Inside® CLEAR Classic 8040-440
    require a pre-service flush at a flow rate of 12 GPM (gallons per minute) for 24 hours.
    Aquaporin Inside® CLEAR Classic HR 4040,  Aquaporin Inside® CLEAR Classic HR 4040XL
    require a pre-service flush at a flow rate of 4 GPM (gallons per minute) for 24 hours.
    Aquaporin Inside® CLEAR Classic HR 8040-400, Aquaporin Inside® CLEAR Classic HR 8040-440
    require a pre-service flush at a flow rate of 12 GPM (gallons per minute) for 24 hours.
    Aquaporin Inside® CLEAR Classic FR 4040,  Aquaporin Inside® CLEAR Classic FR 4040XL
    require a pre-service flush at a flow rate of 4 GPM (gallons per minute) for 24 hours.
    Aquaporin Inside® CLEAR Classic FR 8040-400,  Aquaporin Inside® CLEAR Classic FR
    8040-440 require a pre-service flush at a flow rate of 12 GPM (gallons per minute) for
    24 hours.
    Aquaporin Inside® CLEAR Eco 4040, Aquaporin Inside® CLEAR Eco 4040XL require a
    pre-service flush at a flow rate of 4 GPM (gallons per minute) for 24 hours.
    Aquaporin Inside® CLEAR Eco 8040-400,  Aquaporin Inside® CLEAR Eco 8040-440 require a
    pre-service flush at a flow rate of 12 GPM (gallons per minute) for 24 hours.

[1] Certified for the following model numbers and descriptions:
    
    Aquatherm Greenpipe® - NPT threaded back plate elbow 
    0620108 (1/2" - 20mm) x 1/2" FIP
    0620110 (1/2" - 20mm) x 3/4" FIP
    0620112 (3/4" - 25mm) x 3/4" FIP
    0620113 (3/4" - 25mm) x 1/2" FIP
    
    Aquatherm Greenpipe® - Wing back 90 elbow
    0620158 (1/2" - 20mm) x 1/2" FIP
    
    Aquatherm Greenpipe® Transition Piece
    0621008 (1/2" - 20mm) x 1/2" FIP
    0621010 (1/2" - 20mm) x 3/4" FIP
    0621011 (3/4" - 25mm) x 1/2" FIP
    0621012 (3/4" - 25mm) x 3/4" FIP
    0621013 (1" - 32mm) x 3/4" FIP
    0621108 (1/2" - 20mm) x 1/2" FIP
    0621110 (1/2" - 20mm) x 3/4" FIP
    0621111 (3/4" - 25mm) x 1/2" FIP
    0621112 (3/4" - 25mm) x 3/4" FIP
    0621113 (1" - 32mm) x 3/4" FIP
    0621114 (1" - 32mm) x 1" FIP
    0621115 (1 1/4" - 40mm) x 1" FIP
    0621116 (1 1/4" - 40mm) x 1 1/4" FIP
    0621117 (1 1/2" - 50mm) x 1 1/4" FIP
    0621118 (1.5" - 50mm) x 1.5" FIP
    0621119 (2" - 63mm) x 1.5" FIP
    0621120 (2" - 63mm) x 2" FIP
    0621122 (2.5" - 75mm) x 2" FIP
    0621208 (1/2" - 20mm) x 1/2" MIP
    0621210 (1/2" - 20mm) x 3/4" MIP
    0621211 (3/4" - 25mm) x 1/2" MIP
    0621212 (3/4" - 25mm) x 3/4" MIP
    0621213 (1" - 32mm) x 3/4" MIP
    0621308 (1/2" - 20mm) x 1/2" MIP
    0621310 (1/2" - 20mm) x 3/4" MIP
    0621312 (3/4" - 25mm) x 3/4" MIP
    0621314 (1" - 32mm) x 1" MIP
    0621316 (1" - 32mm) x 1.25" MIP
    0621317 (1 1/4" - 40mm) x 1" MIP
    0621318 (1.25" - 40mm) x 1.25" MIP
    0621319 (1.5" - 50mm) x 1.25" MIP
    0621320 (1.5" - 50mm) x 1.5" MIP
    0621321 (2" - 63mm) x 1.5" MIP
    0621322 (2" - 63mm) x 2" MIP
    0621323 (2.5" - 75mm) x 2" MIP
    0621324 (2.5" - 75mm) x 2.5" MIP
    0621325 (3" - 90mm) x 3" MIP
    
[2] Certified for the following model numbers and descriptions:
    
    Aquatherm Greenpipe® - Transition Elbow
    0623008 (1/2" - 20mm) x 3/4" FIP NPT
    0623010 (1/2" - 20mm) x 1/2" FIP NPT
    0623012 (3/4" - 25mm) x 3/4" FIP NPT
    0623014 (3/4" - 25mm) x 1/2" FIP NPT
    0623016 (1" - 32mm) x 3/4" FIP NPT
    0623018 (1" - 32mm) x 1" FIP NPT
    0623208 (1/2" - 20mm) x 1/2" FIP NPT male/female
    0623506 (1/2" - 20mm) x 1/2" MIP NPT
    0623508 (1/2" - 20mm) x 3/4" MIP NPT
    0623510 (3/4" - 25mm) x 3/4" MIP NPT
    0623512 (1" - 32mm) x 3/4" MIP NPT
    0623514 (1" - 32mm) x 1" MIP NPT
    
    Aquatherm Greenpipe® - Transition Tee
    0625006 (1/2" - 20mm) x (1/2" - 20mm) x 1/2" FIP
    0625008 (1/2" - 20mm) x (1/2" - 20mm) x 3/4" FIP
    0625010 (3/4" - 25mm) x (3/4" - 25mm) x 1/2" FIP
    0625012 (3/4" - 25mm) x (3/4" - 25mm) x 3/4" FIP
    0625014 (1" - 32mm) x (1" - 32mm) x 3/4" FIP
    0625016 (1" - 32mm) x (1" - 32mm) x 1" FIP
    0625022 (1.5" - 50mm) x (1.5" - 50mm) x 1" FIP
    0625506 (1/2" - 20mm) x (1/2" - 20mm) x 1/2" MIP
    Aquatherm Greenpipe® - Fusion Outlet
    0628214 (1.25"/3/4" - 40/25mm x 1/2" FIP)
    0628216 (1.5"/3/4" - 50/25mm x 1/2" FIP)
    0628218 (2"/3/4" - 63/25mm x 1/2" FIP)
    0628220 (2.5"/3/4" - 75/25mm x 1/2" FIP)
    0628222 (3"/3/4" - 90/25mm x 1/2" FIP)
    0628224 (3.5"/3/4" - 110/25mm x 1/2" FIP)
    0628226 (4"/3/4" - 125/25mm x 1/2" FIP)
    0628230 (6"/3/4" - 160/25mm x 1/2" FIP)
    0628232 (8-10"/3/4" - 200-250/25mm x 1/2" FIP)
    0628234 (1.25"/3/4" - 40/25mm x 3/4" FIP)
    0628236 (1.5"/3/4" - 50/25mm x 3/4" FIP)
    0628238 (2"/3/4" - 63/25mm x 3/4" FIP)
    0628240 (2.5"/3/4" - 75/25mm x 3/4" FIP)
    0628242 (3"/3/4" - 90/25mm/3/4" FIP)
    0628244 (3.5"/3/4" - 110/25mm/3/4" FIP)
    0628246 (4"/3/4" - 125/25mm x 3/4" FIP)
    0628250 (6"/3/4" - 160/25mm x 3/4" FIP)
    0628254 (8-10"/3/4" - 200-250/25mm x 3/4" FIP)
    0628260 (2.5"/1" - 75/32mm x 1" FIP)
    0628262 (3"/1" - 90/32mm x 1" FIP)
    0628264 (3.5"/1" - 110/32mm x 1" FIP)
    0628266 (4" x 1" - 125/32mm x 1" FIP)
    0628270 (6"/1" - 160/32mm x 1" FIP)
    0628274 (8-10"/1" - 200-250/32mm x 1" FIP)
    0628314 (1.25"/3/4" - 40/25mm x 1/2" MIP)
    0628316 (1.5"/3/4" - 50/25mm x 1/2" MIP)
    0628318 (2"/3/4" - 63/25mm x 1/2" MIP)
    0628320 (2.5"/3/4" - 75/25mm x 1/2" MIP)
    0628322 (3"/3/4" - 90/25mm x 1/2" MIP)
    0628324 (3.5"/3/4" - 110/25mm x 1/2" MIP)
    0628326 (4"/3/4" - 125/25mm x 1/2" MIP)
    0628330 (6"/3/4" - 160/25mm x 1/2" MIP)
    0628334 (1.25"/3/4" - 40/25mm x 3/4" MIP)
    0628336 (1.5"/3/4" - 50/25mm x 3/4" MIP)
    0628338 (2"/3/4" - 63/25mm x 3/4" MIP)
    0628340 (2.5"/3/4" - 75/25mm x 3/4" MIP)
    0628342 (3"/3/4" - 90/25mm x 3/4" MIP)
    0628344 (3.5"/3/4" - 110/25mm x 3/4" MIP)
    0628346 (4"/3/4" - 125/25mm x 3/4" MIP)
    0628350 (6"/3/4" - 160/25mm x 3/4" MIP)
[3] Only products bearing the NSF Mark are Certified.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[4] Only products bearing the NSF Mark are Certified.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] The carbon source is coal, wood, and/or coconut.
[2] Trade names may include letters and/or numbers to designate any or all of the following:
    mesh size, customer, market, processing methods, intended applications, activity level,
    special testing, or other customer or product specific differentiators.
[4] Certified for a maximum use level of 100 mg/L.

[1] The carbon source is coal, wood and/or coconut.
[2] Trade names may include letters and/or numbers to designate any or all of the following:
    mesh size, customer, market, processing methods, intended applications, activity level,
    special testing, or other customer or product specific differentiators.
[4] Certified for a maximum use level of 100 mg/L.

[1] The carbon source is coal, wood and/or coconut.
[2] Trade names may include letters and/or numbers to designate any or all of the following:
    mesh size, customer, market, processing methods, intended applications, activity level,
    special testing, or other customer or product specific differentiators.
[3] Certified for a maximum use level of 100 mg/L.

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] Certified for metric equivalent sizes of 40 - 350 mm.

[1] Certification includes metric equivalent sizes of 40 - 350 mm.

[1] The UNA-620AB is certified for a minimum daily flow of 31,200 liters per day.
    The UNA-620A and UNA620A-ADA are certified for a minimum daily flow of 24,000 litters
    per day.
[2] UNA620A-DCA is certified for a minimum daily flow of 47,520 liters per day.
[3] The UNA-620AB, UNA620A-ADA, UNA620A-DCA and UNA-620A are flushed for 2 hours at a flow
    rate of 33.3 liters per minute with UF/MF filtered de-ionized water.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] The UNA-620AB is certified for a minimum daily flow of 31,200 liters per day. 
    The UNA-620A and UNA620A-ADA are certified for a minimum daily flow of 24,000 liters per
    day. 
    The UNA-660A is certified for a minimum daily flow of 19,200 liters per day.
    The UNA-600A is certified for a minimum daily flow of 1,040 liters per day.
[2] The UNA-620AB, UNA620A-ADA and UNA-620A are flushed for 2 hours at a flow rate of 33.3
    liters per minute with UF/MF filtered de-ionized water.
    The UNA-660A is flushed for 2 hours at a flow rate of 26.6 liters per minute with UF/MF
    filtered de-ionized water.
    The UNA-600A is flushed for 2 hours at a flow rate of 16.7 liters per minute with UF/MF
    filtered de-ionized water.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] Certified for a maximum surface area to volume ratio of 30 sq. in./L.

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] The abbreviations in the trade names refer to:
    C-OUT  - CLEANOUT
    DRG    - DRAINAGE
    22 1/2 - 22 1/2 DEGREE
    11 1/4 - 11 1/4 DEGREE
    TY     - Y TEE
    LTTY   - LONG TURN Y TEE
    W/O    - WITHOUT
    FLG    - FLANGE
    Y      - Size in inches
[2] The abbreviations in the trade names refer to:
    125     – CLASS 125 FITTING
    150     – CLASS 150 FITTING
    250     – CLASS 250 FITTING
    300     – CLASS 300 FITTING
    45      – 45 DEGREE
    90      – 90 DEGREE
    BLK     - BLACK (Nongalvanized parts)
    BUSH    – BUSHING
    C/O     – CLEANOUT
    C/S     – COUNTERSUNK
    CI      – CAST IRON
    C-O     – CLEANOUT
    C-OT    - CLEANOUT
    CPLG    – COUPLING
    DBLTAP  – DOUBLETAP TANK BUSHING (HEAVY TYPE ONLY)
    ECC     – ECCENTRIC
    ELL     – ELBOW
    EXT PCS – EXTENSION PIECE
    GALV    - GALVANIZED
    GLV     - GALVANIZED
    HEX     – HEXAGON
    L&R THD – LEFT & RIGHT HAND THREAD
    MI      – MALLEABLE IRON
    RED     – REDUCING
    RTN     – RETURN
    SQ HD   – SQUARE HEAD, (CORED PLUG)
    ST      – STREET
    STL     – STEEL
    Y       – Size in inches
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] 1/8" x 1/8" x 1/8" - 6" x 6" x 4"
[2] 1 1/4" x 1 1/4" x 1" - 12" x 12" x 10"
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] Certification does not include any additional fittings or gaskets.
[2] Use of this material may not be appropriate in all water chemistries. Copper tube may
    require corrosion control to limit the leaching of copper into drinking water under
    certain water chemistries. Refer to Informative Annex I-6.1 of NSF/ANSI/CAN 61 for the
    water quality considerations to be used before installing this product.
[3] The "A" prefix in the product trade names may be removed to denote domestic
    identification.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[4] Models that have an o-ring are approved for NBR o-rings only.
[5] Certified for PTFE or stainless steel diaphragm and stainless steel process connection
    only.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] Certified for 1/2" - 12" pipe.