NSF Product and Service Listings

[1] Colors: Dark Green
    Number of Coats: 1
    Maximum Field Use Dry Film Thickness (in mils): 50
    Maximum thinner: None
    Final Cure Time and Temperature: 6233W 4G: 30-45 seconds at 450°F; 6233W 8G: 60-90
    seconds at 450°F; 6233W 11G: 90-120 seconds at 450°F
    Special Comments: Preheat part to 425° - 488° F before application of powder.
[2] Number of Coats: 1
    Maximum Field Use Dry Film Thickness (in mils): 60
    Final Cure Time and Temperature: 206N: 10 minutes at 400°F; 206N Extra LG: 16 minutes at
    400°F; 206N Fluid Bed: 10 minutes at 400°F; 206N Long Gel: 10 minutes at 400°F
[4] Number of Coats: 1
    Sequence of Coats: N/A
    Maximum Field Use Dry Film Thickness (in mils): 60
    Maximum Thinner: None
    Final Cure Time and Temperature: 25 minutes at 425° F
[5] Certified for a maximum surface area to volume ratio of 122.1 sq. in./L for pump end use.

[1] Certified for use in municipal wells in conjunction with a submersible pump. Not
    Certified for residential use.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

[1] Colors: Blue, White
    Number of coats: 3
    Maximum field use dry film thickness (in mils): 45 (15 mils/coat)
    Recoat cure time and temperature: 6 hours at 77°F
    Final cure time and temperature: 7 days at 77°F
    Special Comments: Mix ratio of Part A:B is 2:1 by volume

[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    
[Q] This product meets the reduced Q test statistic criteria of 1 µg or 0.5 µg for lead per
    Section 9.5.1.1 of NSF/ANSI/CAN 61.

[2] This product does not require a Q statistic. It is made from material or materials that
    do not require lead analysis when reviewed per NSF/ANSI/CAN Standard 61, Section 3.3.
[Q] This product meets the reduced Q test statistic criteria of 1 µg or 0.5 µg for lead per
    Section 9.5.1.1 of NSF/ANSI/CAN 61.

[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    
[Q] This product meets the reduced Q test statistic criteria of 1 µg or 0.5 µg for lead per
    Section 9.5.1.1 of NSF/ANSI/CAN 61.

[1] Certified for equivalent metric sizes.
[2] YY - 02 through 48
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

[1] (1) Hose length
    (2) Packaging options (M, F, E, EL, CF, CM, PF, FM, XM, XF, XE, XL, XC, or R)
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

[1] (1) Hose length
    (2) Packaging options (M, F, E, EL, CF, CM, PF, FM, XM, XF, XE, XL, XC, or R)
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

[1] XX: DIN connector options	
    20 - 20 cable DIN	
    35 - 35 conduit DIN	
    40 - 40 cord DIN	
    	
    yyy:	
    038 - 3/8" NPT	
    012 - 1/2" NPT	
    034 - 3/4" NPT	
    100 - 1" NPT	
    125 - 1 1/4" NPT	
    150 - 1 1/2" NPT	
    200 - 2" NPT	
    	
    	
    zz:	
    11 - Dn11,5 G 3/8"	
    13 - Dn13,5 G 1/2"	
    13 - Dn13,5 G 3/4"	
    18 - Dn18 G 3/4"	
    26 - Dn26 G 1"	
    32 - Dn32 G 1 1/4"	
    45 - Dn45 G 1 1/2"	
    50 - Dn50 G 2"	
    	
    E: EPDM	
    	
    ww: Represents the series coil and may be any alphanumeric character
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

[1] Colors: Blue, white, yellow
    Number of Coats: 1
    Maximum Field Use Dry Film Thickness (in mils): 20
    Maximum Thinner: None
    Final Cure: 20 minutes at 428°F
[2] Colors: Red
    Number of Coats: 1
    Maximum Field Use Dry Film Thickness (in mils): 20
    Final Cure Time and Temperature: 20 minutes at 220°C
    Special Comments: Preheat at 200°C - 230°C
[3] Colors: Black, rust
    Number of Coats: 1
    Maximum Field Use Dry Film Thickness (in mils): 20
    Final Cure Time and Temperature: 20 minutes at 428°F
[4] Colors: Blue
    Number of Coats: 1
    Maximum Field Use Dry Film Thickness (in mils): 20 
    Recoat Cure Time and Temperature: 20 minutes at 220°C
    Special Comments: Pre-heat at 200°C - 230°C
[5] Colors: Blue										
    Number of Coats: 1										
    Maximum field use dry film thickness (in mils): 20										
    Final cure time and temperature: See special comments										
    Special comments: Pre-heat parts to 190-210°C. The coating is considered self-curing if
    the wall thickness of the part is 										
    greater than 8 mm (the coating will be cured by the time the part reaches ambient temp).
    If the preheated part is less than 										
    8 mm, the part will require a post-cure of 3-8 min at 190-210°C (374°F).
[6] Number of Coats: 1
    Maximum Field Use Dry Film Thickness (in mils): 20	
    Final Cure Time and Temperature: 20 minutes at 428°F
    Special Comments: Self curing on 8 mm or heavier steel at 392°F - 428°F metal
    temperature.
[7] Number of Coats: 1
    Maximum Field Use Dry Film Thickness (in mils): 35	
    Final Cure Time and Temperature: 455°F metal temperature and post cured for 10 minutes
    at 455°F
    Special Comments: Metal plates are pre-heated to 455°F and sprayed while hot.  Plates
    are then post cured for 10 minutes at 455°F.
[8] Colors: Red brown
    Number of Coats: 1
    Maximum Field Use Dry Film Thickness (in mils): 20
    Maximum Thinner:  None
    Final Cure Time and Temperature: 20 minutes at 428ºF

[1] Number of Coats: 1
    Maximum Field Use Dry Film Thickness (in mils): 20
    Final Cure Time and Temperature: 15 minutes at 350°F
    Special Comments: Preheat substrate to 350° F.
[2] Number of Coats: 1
    Maximum Field Use Dry Film Thickness (in mils): 18
    Final Cure Time and Temperature:: 1 minute at 475ºF	
    Special Comments: Preheat panel to 650ºF before coating
[4] Number of Coats: 1
    Maximum Field Use Dry Film Thickness (in mils): 15
    Maximum Thinner: None
    Final Cure Time and Temperature: 20 minutes at 350°F
    Special Comments: Preheat substrate to 350°F
[5] Number of Coats: 1
    Maximum Field Use Dry Film Thickness (in mils): 16
    Special Comments: Preheat part before powder application to 350°F for 20 minutes. Post
    heat part to 350°F for 20 minutes.

[2] Colors: Off White
    Number Of Coats: 1
    Maximum Field Use Dry Thickness (in mils): 24 mils
    Final Cure Time/Temperature: 7 days at 25°C
    Special Comments: Mix ratio of Part A:B is 3:1 by volume.

[1] Colors: Blue, Red
    Number of Coats: 1
    Maximum Field Use Dry Film Thickness (in mils): 20 mils
    Recoat Cure Time and Temperature: 20 minutes at 428°F
    

[1] Colors: Blue, white
    Number of Coats: 1
    Maximum Field Use Dry Film Thickness (in mils): 20
    Maximum Thinner: None
    Final Cure Time and Temperature: 20 minutes at 220°C
    Special Comments: Preheat temperature 200°C - 230°C
[2] Color: Blue, red, red-brown
    Number of Coats: 1
    Sequence of Coats: N/A
    Maximum Field Use Dry Film Thickness (in mils): 20
    Maximum Thinner: None
    Recoat Cure Time and Temperature: 20 minutes at 220°C
    Special Comments: Preheat temperature 200°C - 230°C
[3] Colors: Blue
    Number of Coats: 1
    Maximum Field Use Dry Film Thickness (in mils): 12
    Maximum Thinner: None
    Final Cure Time and Temperature: 20 minutes at 220°C
    Special Comments: Preheat temperature 200°C - 230°C
[4] Colors: Blue
    Number of Coats: 1
    Maximum Field Use Dry Film Thickness (in mils): 20
    Final Cure Time and Temperature: 20 minutes at 200°C
    Special Comments: Preheat substrate to 180°C - 220°C
[5] Colors: Blue
    Number of Coats: 1
    Maximum Field Use Dry Film Thickness (in mils): 20
    Maximum Thinner: No Thinner
    Final Cure Time and Temperature: 20 minutes at 220°C / 428°F
    Special Comments: Preheat substrate to 200°C - 230°C

[1] Colors: White
    Number of Coats: 1
    Maximum Field Use Dry Film Thickness (in mils): 18
    Final Cure Time and Temperature: 7 days at 25°C
    Special Comments: Mix ratio of Part A:B is 3:1 by volume

[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

[4] Size - The first number refers to the diameter of the host pipe and the second number
    refers to the diameter of the outlet.
[5] TL - FRIATEC pneumatic Top-Loading tool required.
[6] Dimensions given in brackets, e.g. SA-TL d(10-22) x 3:
    This saddle fitting can be fused on a main pipe of a size which is between and including
    10 to 22 inch. 3 inch indicates the size of the outlet. 
    The dimension indication "(xx-yy)" is only possible for saddles.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

[3] Valves 27-160-9176(Y)(XX)-05:
    Y  - Bolting Material	
         1 - 316 bolting
         3 - 304 bolting
    XX - Description of non-wetted options
         29 – Sherwin-Williams Red Oxide. Int. and ext.
         34 – Sherwin-Williams Red Oxide. Holiday free Int. and no holiday free ext.
         35 – Sherwin-Williams Red Oxide. Holiday free Int. and holiday free ext.
         87 – Sherwin-Williams Red Oxide. Int. and Polyurethan ext.
         88 – Sherwin-Williams Red Oxide. Holiday free Int. and Polyurethan ext.
[4] Acceptable order codes for interior coating are 00, 01, 03, 08, 13, 29 and 53.
[5] Certified for resilient seat to epoxy coated ductile iron seat. Certified for valves
    with no external actuation, lever and spring actuation, and lever and weight actuation.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

[1] XX and YY refer to the size in inches.
[2] Certified for use in distribution systems only.
[3] 2500 series valves are certified with the following optional connection types:
    (A)   - ALPHA
    (AX)  - ALPHA XL
    (F)   - Flanged (ANSI Class 125)
    (F2)  - Flanged (ANSI Class 250 with raised face)
    (F3)  - Flanged (PN16 with raised face)
    (F4)  - Flanged (PN16 with flat face)
    (FB)  - Flanged (ANSI Class 250 with flat face)
    (FX)  - Flex Ring
    (MJ)  - Mechanical Joint
    (PO)  - Push-on
    (PVC) – PVC
    (RF)  - Flanged (ANSI Class 150 with raised face)
    (S)   - Threaded (NPT)
    (TM)  - Tapping flanged by mechanical joint
    (TYT) – Tyton
    
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

[2] XX refers to size and may be 03, 04, 06, 08, 10 or 12.
[3] Certified for standard and outside shaft models.
[4] XX and YY refers to the size in inches.
[5] Certified for use in distribution systems only.
[6] 2500 and 3500 series valves are certified with the following optional connection types:
    (A)   - ALPHA
    (AX)  - ALPHA XL
    (F)   - Flanged (ANSI Class 125)
    (F2)  - Flanged (ANSI Class 250 with raised face)
    (F3)  - Flanged (PN16 with raised face)
    (F4)  - Flanged (PN16 with flat face)
    (FB)  - Flanged (ANSI Class 250 with flat face)
    (FX)  - Flex Ring
    (MJ)  - Mechanical Joint
    (PO)  - Push-on
    (PVC) – PVC
    (RF)  - Flanged (ANSI Class 150 with raised face)
    (S)   - Threaded (NPT)
    (TM)  - Tapping flanged by mechanical joint
    (TYT) – Tyton
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

[3] XX refers to the size of the valve in inches and may be 03, 04, 06, 08, 10, 12, 14, or
    16.
[4] Certified for use in distribution systems only.
[5] 2100 series check valves are certified with the following optional connection types:
    - Flanged 
    - Mechanical Joint
    - Mechanical Joint Plain End
[6] XX and YY refer to the size in inches.
[7] 2500 and 3500 series valves are certified with the following optional connection types:
    (A)	  - ALPHA
    (AX)  - ALPHA XL
    (F)   - Flanged (ANSI Class 125)
    (F2)  - Flanged (ANSI Class 250 with raised face)
    (F3)  - Flanged (PN16 with raised face)
    (F4)  - Flanged (PN16 with flat face)
    (FB)  - Flanged (ANSI Class 250 with flat face)
    (FX)  - Flex Ring
    (MJ)  - Mechanical Joint
    (PO)  - Push-on
    (PVC) – PVC
    (RF)  - Flanged (ANSI Class 150 with raised face)
    (S)   - Threaded (NPT)
    (TM)  - Tapping flanged by mechanical joint
    (TYT) – Tyton
[8] The Swing Check Valve - Series 52 SC may use a "lever and weight" or "lever and spring"
    option.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

[2] The following accessories are use with the globe or angle pattern control valve tubing
    and fittings:
    Model LFFBV-3C-M1 Ball Valves (1/4" - 1")
    Figure 60 Flow Clean Strainer (1/4" - 1")
    263SS Pressure reducing pilot
    Mechanical check option
    Anti-Cavitation trim option
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

[1] Products have a marking exemption which allow product NSF-61 Marking and labels bearing
    the <= 0.25%.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

[3] (x) Connection options
    FLxFL - Flange by flange
    MJxFL - Mechanical joint by flange
    MJxMJ - Mechanical joint by mechanical joint
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

[1] Fitting packaging is coded by the following convention:
    X indicates packaging:
    0 - Bulk pack
    1 - Blister pack
    3 - Single bag
    5 - Flag tagged
[2] Fitting sizes are coded by the following convention:
    XX, YY, and ZZ indicate size:
    02 - 1/8"
    03 - 3/16"
    04 - 1/4"
    05 - 5/16"
    06 - 3/8"
    08 - 1/2"
    10 - 5/8"
    12 - 3/4"
    14 - 7/8"
    16 - 1"
    24 - 1.5"
    32 - 2"
    40 - 2.5"
    48 - 3"
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

[1] Certified for use in valves 1" - 120".
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    
[LL] Product conforms with lead content requirements for “lead free” plumbing as defined by
     California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water
     Act.

[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

[1] DAV  - Dorot Control Valve
    P    - Plastic Body & Cover
    X    - Size
           05 - 1/2" / 12 mm
           75 - 3/4" / 20 mm
           1  - 1" / 25mm
           2  - 2" / 50 mm
    Y    - Function
           A  - Automatic
           K  - Kinetic
           KA - Kinetic Automatic Combination
    Z    - Connection Standard
           BSP - British Standard Pipe
           NPT - National Pipe Thread
    PN16 - Pressure Rating (230 psi)
    Note: 2" / 50 mm available with K or KA functions only
[2] Products may have a K or KA suffix.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    
[Q] This product meets the reduced Q test statistic criteria of 1 µg or 0.5 µg for lead per
    Section 9.5.1.1 of NSF/ANSI/CAN 61.

[1] This product is Certified for use with 1.5" Octave threaded polymer water meters only.
[2] Certified for use with 1" water meters.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

[1] Colors: Black
    Number of Coats: 2
    Sequence of Coats: Primer: Rilprim P23 V40 or Primgreen LAT 12035; Topcoat: Listed
    Product
    Maximum Field Use Dry Film Thickness (in mils): Primer: 0.5; Topcoat: 20
    Maximum Thinner: None
    Recoat Cure Time and Temperature: 30 minutes at 20ºC followed by 8 minutes at 330ºC
    Final Cure Time and Temperature: None (see special comments)
    Special Comments: Ensure substrate is free of oil or any contaminants. Apply uniform
    layer of primer (pneumatic gun application). Primer dries in 30 minutes at 20ºC. Primer
    Target DFT = 0.5 mils. Then heat substrate for 8 minutes at 330ºC. Quickly convey and
    then dip panel into fluidized bed for 3 seconds, while shaking. Powder Target DFT = 10 -
    20 mils. Cool down at ambient air, 20ºC.
[2] Colors: Blue
    Number of Coats: 2
    Sequence of Coats: (1) Primgreen™ LAT 12035 or Rilprim P23V40 (2) Listed product
    Maximum Field Use Dry Film Thickness (in mils): 0.5 (primer); 28 (topcoat)
    Maximum Thinner: None
    Recoat Cure Time and Temperature: Primer: 30 minutes at ambient; Topcoat: 20 minute
    preheat of primed panels at 290°C
    Final Cure Time and Temperature: 1 minute 30 secs at 220°C to post fuse the remainder of
    the panel.
    Primgreen LAT 12035 primer is authorized for use in pipes 6" and greater, fittings 2"
    and greater, and valves 2" and greater.
[3] Colors: Grey
    Number of Coats: 2
    Sequence of Coats: Primgreen LAT 12035 then listed product
    Maximum Field Use Dry Film Thickness (in mils): 0.5 (primer); 20 (topcoat)
    Maximum Thinner: N/A
    Recoat Cure Time and Temperature: 30 minutes at 20ºC followed by 8 minutes at 330ºC
    Final Cure Time and Temperature: None (see special comments)
    Special Comments: Ensure substrate is free of oil or any contaminants. Apply uniform
    layer of primer (pneumatic gun application). Primer dries in 30 minutes at 20ºC. Primer
    Target DFT = 0.5 mils. Heat substrate 8 minutes at 330ºC. Quickly convey and then dip
    panel into fluidized bed during 3 sec, while shaking. Powder Target DFT = 10 - 20 mil.
    Cool down at ambient air, 20ºC.
[4] Colors: White
    Number of Coats:  2
    Sequence of Coats:  Primer:  Primgreen LAT 12035; Topcoat: Listed Product
    Maximum Field Use Dry Film Thickness (in mils):  Primer: 0.5; Topcoat: 20
    Recoat Cure Time and Temperature:  30 minutes at 20°C followed by 8 minutes at 330°C
    Final Cure Time and Temperature:  None (see special comments)
    Special Comments:  Ensure substrate is free of oil or any contaminants.  Apply uniform
    layer of primer (pneumatic gun application).  Primer dries in 30 minutes at 20°C.  Heat
    substrate 8 minutes at 330°C.  Quickly convey and then dip panel into fluidized bed for
    3 sec, while shaking.  Cool down at ambient air, 20°C.

[1] Certified for metric equivalent sizes of 40 - 350 mm.

[1] Certification includes metric equivalent sizes of 40 - 350 mm.

[1] Certified for trims 100, 101, 102, 103, 118, 125, 126, 129, 182, and 183.
[2] Certified for trims 102, 103, 125, 126, 183.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

[1] Certified for equivalent metric sizes.

[1] XX  - U, SU, or SC
    VVV - 201 - 224
    YYY - 101 - 124
    WW  - 05, 06, 07, or 08
    Z   - A, C, or G
[2] XX (coil electrical connection) - S0, L0, L1
    YYY (pressure vessel option)    - 100, 101, 200, 201
    ZZ (voltages)                   - D*, E*, F*
[3] Product requires a 15-minute flush prior to use.
[4] WWW (item number) - 001, 005, 007, 019, 023, 025, 037, 041, 043, 055, 059, 061
[5] WWW (item number) - 002, 006, 008, 020, 024, 026, 038, 042, 044, 056, 060, 062
[6] WWW (item number) - 004, 010, 012, 022, 028, 030, 040, 046, 048, 058, 064, 066
[7] WWW (item number) - 003, 009, 011, 021, 027, 029, 039, 045, 047, 057, 063, 065
[8] A, BB, C, D, E, F, G, HH
    A (Body Material) - S
    BB (Edition) - 05, 06, 07, 08
    C (Port Size/ Type) - A, B, 1, 2
    D (Size) A, B, C, E, 0, 1, 5, 6, 9
    E (Electrical Related) - any one alphanumeric digit
    F (Electrical Related) - any one alphanumeric digit
    G (Electrical Related) - any one alphanumeric digit
    HH (Electrical Related) - any two alphanumeric digits
[9] RRR (item numbers) - 038, 042, 044, 138, 142, 144
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    
[10] ZZ (Voltage) - **
[11] RRR (item numbers) - 040, 046, 048, 140, 146, 148
[12] RRR (item numbers) - 001, 002, 038, 042, 044, 138, 142, 144

[1] XX  - U, SU, or SC
    VVV - 201 - 224
    YYY - 101 - 124
    WW  - 05, 06, 07, or 08
    Z   - A, C, or G
[2] XX (coil electrical connection) - S0, L0, L1
    YYY (pressure vessel option)    - 100, 101, 200, 201
    ZZ (voltages)                   - D*, E*, F*
[3] Product requires a 15-minute flush prior to use.
[4] WWW (item number) - 001, 005, 007, 019, 023, 025, 037, 041, 043, 055, 059, 061
[5] WWW (item number) - 002, 006, 008, 020, 024, 026, 038, 042, 044, 056, 060, 062
[6] WWW (item number) - 004, 010, 012, 022, 028, 030, 040, 046, 048, 058, 064, 066
[7] WWW (item number) - 003, 009, 011, 021, 027, 029, 039, 045, 047, 057, 063, 065
[8] A, BB, C, D, E, F, G, HH
    A (Body Material) - S
    BB (Edition) - 05, 06, 07, 08
    C (Port Size/ Type) - A, B, 1, 2
    D (Size) A, B, C, E, 0, 1, 5, 6, 9
    E (Electrical Related) - any one alphanumeric digit
    F (Electrical Related) - any one alphanumeric digit
    G (Electrical Related) - any one alphanumeric digit
    HH (Electrical Related) - any two alphanumeric digits
[9] RRR (item numbers) - 038, 042, 044, 138, 142, 144
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    
[10] ZZ (Voltage) - **
[11] RRR (item numbers) - 040, 046, 048, 140, 146, 148
[12] RRR (item numbers) - 001, 002, 038, 042, 044, 138, 142, 144

[1] Certified for black, natural, or gray valve body

[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

[1] Meets the health effects requirements of NSF/ANSI/CAN 600 according to the requirements
    of NSF/ANSI/CAN 61 including the most current health effects criteria for xylenes,
    toluene, and ethylbenzene.
[2] Coating Notes:
    Colors: White, Black, Gray, Blue, Beige
    Number Of Coats: 2
    Maximum Field Use Dry Thickness(in mils): 20 mils
    Maximum Thinner: None
    Recoat Cure Time and Temperature: 16 hours at 75°F
    Final Cure Time/Temperature: 30 days at 75°F
    Special Comments: Mix ratio of A:B is 2:1 by volume. This is for pipe, fitting, pump,
    and valve end use.
[3] Coating Notes:
    Colors: White, Black, Gray, Blue, Beige
    Number Of Coats: 1-3
    Maximum Field Use Dry Thickness(in mils): 20
    Maximum Thinner: 5% 71T104 Thinner Clear by volume
    Recoat Cure Time and Temperature: 8 hours at 75°F
    Final Cure Time/Temperature: 7 days at 75°F
    Special Comments: Mix ratio of A:B is 2:1 by volume.
[4] Certified for mechanical device end use (other than pump and valve) for a maximum of 189
    sq. ft. per gpm.
[5] Coating Notes:
    Colors: White, Beige, Blue
    Number Of Coats: 1-2
    Maximum Field Use Dry Thickness(in mils): 50
    Maximum Thinner: 5% Thinner #2
    Recoat Cure Time and Temperature: 16 hours at 75°F
    Final Cure Time/Temperature: 5 days at 75°F
    Special Comments: Mix ratio of Part A to Part B is 1:1 by volume.
[6] Certified for mechanical device end use (other than pump and valve) for a maximum of 249
    sq. ft. per gpm.

[1] Number of Coats: 1
    Maximum Field Use Dry Film Thickness (in mils): 1
    Maximum Thinner: none
    Final Cure Time and Temperature: 10 minutes at 390°F
    Special Comments: Mix ratio of Part A (resin feed):Part B (pigment feed) is 4.8:1 by
    volume. Deionized water is added to the bath as needed to obtain 18–22% weight solids.
[2] Colors: Black
    Number of Coats: 1
    Maximum Field Use Dry Film Thickness (in mils): 1
    Final Cure Time and Temperature: 10 minutes at 390ºF
    Special Comments: Mix ratio of Part A:B is 4.8:1 by volume. Deionized water is added to
    the bath as needed to obtain 18-22% weight solids.