NSF Product and Service Listings

These NSF Official Listings are current as of Wednesday, October 27, 2021 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.

Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/WaterReg/Listings.asp?Company=C0276933&Standard=NSFREG4&


NSF REG4
Water Fittings, System Components and Materials - Verification
of Regulatory Compliance with UK Regulation 4

Click here for a list of Installation requirements.

For more info, visit NSF REG4 Certified Water Fittings, System Components and Materials


RPE Srl 
Via S Ambrogio 1/3/5
22070 Carbonate (CO) 
Italy 
Visit this company's website

Facility : Carbonate (CO), Italy

R Series[1] [2] [3] [4] [5] [6] [7]

Trade Name Size Installation Requirements
Single (1 inlet, 1 outlet) [8]
Double (1 inlet, 2 outlets) [8]
Quadruple (1 inlets, 4 outlets) [8]
R Series Dispenser family (2 or 3 inlets, 1 outlet) [9]
R Series Mini (1 inlet, 1 outlet) [8]
R series Dual family (1 or 2 inlet(s), 1 outlet) [9]
[1] R Series models are available as either in-line or at a 90° angle (hose tail outlet
    models only)
[2] Maximum working pressure 10.0 Bar. Maximum operating temperature 60°C
[3] Models are available with the RF flow meter module option with the following flowrate
    ranges:
    0.1-3.6 l/min, 0.5-7 l/min, 1-15 l/min or 5-30 l/min
    Note: NSF has not verified the accuracy of the flow meter modules
[4] Models fitted with a flow meter are cold water use only.
[5] Models are available with the RV Filter option.
[6] Models are available with the Pressure Restrictor module option.
    Note: The R series pressure restrictor module, is not designed to meet the requirements
    of a static or drop tight pressure reducing valve and has therefore not been verified
    against these requirements by NSF. RPE should be contacted to discuss the requirements
    for a particular application, to ascertain whether the pressure restrictor module is a
    suitable product for the intended use.
[7] Markings:
    R series, R series Mini, R Series Dispenser, R Series Dual family and Universal models
    R.P.E., flow arrow &
    operating info on body. R Series Modular models: R.P.E. logo, flow arrow on body. Serie
    R and operating info
    on coil. Models that include a flow meter (RF) may also be marked with date of
    manufacture (dial type) on the
    flow meter.
[8] R series and R series Mini: Inlet sizes available in: 1/2” or 3/4” BSP (M or F),1/4” BSP
    (M) or 3/8” BSP (F). Outlet sizes available in: 3/8”, 1/2” & 3/4” BSP (M or F), 1/4” BSP
    (M), ¿” BSP (F), 10mm & 13mm hose tail or 10mm spigot
[9] R Series Dispenser & Dual: M10, double or triple inlet 1/4” BSP male, single outlet 3/4”
    BSP male, 10mm hose tail, 6mm/10mm spigot inlet/outlet
R Series Modular[2] [3] [4] [5] [6] [7] [10]

Trade Name Size Installation Requirements
RM1100 (1 inlet, 1 angled outlet) [11]
RM1200 (1 inlet, 2 angled outlets) [11]
RM1300 (1 inlet, 3 angled outlets) [11]
[2] Maximum working pressure 10.0 Bar. Maximum operating temperature 60°C
[3] Models are available with the RF flow meter module option with the following flowrate
    ranges:
    0.1-3.6 l/min, 0.5-7 l/min, 1-15 l/min or 5-30 l/min
    Note: NSF has not verified the accuracy of the flow meter modules
[4] Models fitted with a flow meter are cold water use only.
[5] Models are available with the RV Filter option.
[6] Models are available with the Pressure Restrictor module option.
    Note: The R series pressure restrictor module, is not designed to meet the requirements
    of a static or drop tight pressure reducing valve and has therefore not been verified
    against these requirements by NSF. RPE should be contacted to discuss the requirements
    for a particular application, to ascertain whether the pressure restrictor module is a
    suitable product for the intended use.
[7] Markings:
    R series, R series Mini, R Series Dispenser, R Series Dual family and Universal models
    R.P.E., flow arrow &
    operating info on body. R Series Modular models: R.P.E. logo, flow arrow on body. Serie
    R and operating info
    on coil. Models that include a flow meter (RF) may also be marked with date of
    manufacture (dial type) on the
    flow meter.
[10] R series modular models which are only available at a 90° angle.
[11] R Series Universal & Modular: R Series Universal models: 18mm inlet/outlet bayonet
     connections. R Series Modular models:3/4” BSP (M) inlet x 10mm hose tail outlet
R Series Universal[1] [2] [3] [4] [5] [6] [7]

Trade Name Size Installation Requirements
Universal body A (straight controlled water flow, 1 outlet) [11]
Universal body B (2 outlets, a straight free flow and a left controlled flow) [11]
Universal body C (2 outlets, a straight free flow and a right controlled flow) [11]
Universal body D (Straight free flow, no control) [11]
[1] R Series models are available as either in-line or at a 90° angle (hose tail outlet
    models only)
[2] Maximum working pressure 10.0 Bar. Maximum operating temperature 60°C
[3] Models are available with the RF flow meter module option with the following flowrate
    ranges:
    0.1-3.6 l/min, 0.5-7 l/min, 1-15 l/min or 5-30 l/min
    Note: NSF has not verified the accuracy of the flow meter modules
[4] Models fitted with a flow meter are cold water use only.
[5] Models are available with the RV Filter option.
[6] Models are available with the Pressure Restrictor module option.
    Note: The R series pressure restrictor module, is not designed to meet the requirements
    of a static or drop tight pressure reducing valve and has therefore not been verified
    against these requirements by NSF. RPE should be contacted to discuss the requirements
    for a particular application, to ascertain whether the pressure restrictor module is a
    suitable product for the intended use.
[7] Markings:
    R series, R series Mini, R Series Dispenser, R Series Dual family and Universal models
    R.P.E., flow arrow &
    operating info on body. R Series Modular models: R.P.E. logo, flow arrow on body. Serie
    R and operating info
    on coil. Models that include a flow meter (RF) may also be marked with date of
    manufacture (dial type) on the
    flow meter.
[11] R Series Universal & Modular: R Series Universal models: 18mm inlet/outlet bayonet
     connections. R Series Modular models:3/4” BSP (M) inlet x 10mm hose tail outlet


Number of matching Manufacturers is 1
Number of matching Products is 13
Processing time was 0 seconds