NSF Product and Service Listings

[1] Description: Combined temperature and pressure relief valves pre-set at 7.0 or 10.0 bar
    (See models) with a DZR brass body. The valves incorporate lever easing gear.
    
    PTEM100050 – 1” BSP (M) x 28mm compression – 7.0 Bar
    PTEM100060 - 1” BSP (M) x 28mm compression – 10.0 Bar
    PTEM600001 – ¾” BSP (M) X ¾” BSP (F) – 7.0 Bar
    PTEM600002 – 1” BSP (M) X 1” BSP (F) – 7.0 Bar
    PTEM600003 – 1 ¼” BSP (M) X 1” BSP (F) – 7.0 Bar
    PTEM600004 – 1 ½” BSP (M) X 1 ½” BSP (F) – 7.0 Bar
    PTEM600005 – 2” BSP (M) X 2” BSP (F) – 7.0 Bar
    PTEM600006 – 1 ¼” BSP (M) X 1” BSP (F) – 10.0 Bar
    
    Marking: Inlet, flow arrow and DR on body. Reliance water controls, model, size, temp
    and other technical info on data plate on lever (Models – PTEM100050 & PTEM100060)
    
    Flow arrow and inlet on body. Reliance water controls, model, size, temp and other
    technical info on data plate on lever (Models – PTEM600001 & PTEM600005)
    
    Drain and inlet on body. Reliance water controls, model, size, temp and other technical
    info on data plate on lever (Models – PTEM600003 & PTEM600006)

[4] Range of T-Type thermostatic mixing valves incorporating nickel plated DZR brass bodies
    and a thermostatic cartridge controlling the temperature. Inlet legs incorporate single
    check valve cartridges (verified by test - suitable for backflow protection against
    Fluid Category 2).
    For use with copper pipe manufactured to BS EN1057:2006+A1:2010
[5] Markings: Reliance Logo and heatguard dual on cap. Batch code in format D= Day, WW=
    Week, YY= Year and LL= Production line and product code R HGD (R = RWC, HGD = Heatguard)
    on body. 
[6] Markings: Flow arrow and CR on angle valve inlet legs (HEAT11625 model only).

[7] A compact, automatic vacuum relief valve in DZR brass for use with domestic hot water
    heaters. 
[8] This product is not a backflow prevetntion device
[9] Markings: Reliance, date of manufacture (D/WW/Y), DR and technical information on top of
    face plate.

[15] Description:  ‘Ausimix’ compact range of ‘T’-type thermostatic blending valves with
     nickel plated DZR brass bodies. Each inlet incorporates a stainless-steel strainer and a
     single check valve cartridge, verified by test (suitable for backflow protection against
     Fluid Category 2). 
     
     The SBHeat models have angled isolation valves at both inlets and are for use with PEX
     pipe (manufactured to BS7291 part 3) and Polybutylene pipe (manufactured to BS7291 part
     2): Maximum working pressure 12 bar @ 23°C, 6 bar @ 95°C.  
     Marking Ausimix logo (graphical outline of a Kangaroo), Ausimix and TMV2/3 on cap. Date
     of production (DWWYLL) on main body. Date of production (WWYY prefixed with the letter
     S), size and sharkbite logo (graphical outline of a Shark) on inlet and outlet
     connections. (Ausimix and Sharkbite are brands of the Reliance Worlwide Corporation).
     
     The Heat models are for use with copper pipe to BSEN1057:2006: Maximum working pressure
     10.0 bar. Maximum operating temperature 85°C.
     Marking Ausimix logo on cap. Ausimix logo, CR, Cold + Hot and flow arrow on body.

[18] Description: Heatguard Tempering valve with DZR brass body. For use with copper pipe
     manufactured to EN1057
     
     Marking: Reliance logo, model and temperature on cap. CR, Date of manufacture
     (DD/WW/YY), flow arrow and H+C on body

[19] Description: Range of manually adjustable thermal balancing valves (brass body) supplied
     with a temperature gauge.
     
     Marking: Main Body: Flow arrow, “DN” and “DR”,Reliance Logo and “RELIANCE VALVES” and
     triangle shaped indicator. Batch coding of “DWWYYLL” where D=Day, WW= Week, YY =year and
     LL=Production Line. “40-45-50-55-60-65°C on top of valve

[20] Description: Combined temperature and pressure relief valve incorporating DZR bronze
     body, and a rubber silicone seat washer. Compression fittings for use with copper to BS
     EN 1057.
     
     Marking: Flow arrow on body. Max pressure, max temperature, size and RWC Reliance valves
     on cap on body

[21] Description: Range of adjustable, in-line, pressure reducing valves with DZR brass
     bodies and EPDM o-rings. To be used with copper pipe to BSEN1057:2006+A1:2010. The
     products are supplied with optional pressure gauges.
     
     Maximum supply pressure 20.0 bar.
     Outlet pressure setting is adjustable in the range 1.0 to 6.0 bar.
     
     Marking: PREDATOR on valve cap. CR, flow arrow, size and date code (DWWYY) on body.

[22] Description: Range of T-type thermostatic mixing valves with nickel plated DZR brass
     bodies. Each inlet incorporates spherical ball valve and a single check valve cartridge,
     verified by test (suitable for backflow protection against Fluid Category 2).
     
     Size: HEAT630100 – 1” BSP (F) inlet x 1” BSP (F) outlet
     HEAT640100 – 1” BSP (F) inlet x 1 1/4” BSP (F) outlet
     
     Marking: Model number (630 or 640), date code (DWWYY), flow arrow, hot and cold on body.
     Reliance logo, Reliance valves, Euromixer, model number (630 or 640) and CR on cap.
     Notes: This fitting should be supplied from equally balanced sources.  Where not
     feasible, backflow prevention devices to at least Fluid Category 2 must be installed
     immediately upstream of each inlet.

[1] Description: Range of screw down stop valves with brass bodies and PTFE seals. For use
    with copper pipe to EN1057.
    
    Marking: RWC Sharkbite logo, size, flow arrow & EN1213 on body.

[1] Description: Range of non-rising spindle lock shield gate valves with DZR brass bodies,
    with PTFE stem packing and gaskets.
    
    Maximum working pressure and operating temperature: 16 Bar @ 65°C
    Maximum working pressure and operating temperature: 10 Bar @ 82°C
    
    Marking: Reliance Logo, CR Mark, PN16 & DN on body

[2] Description: Range of bronze bodied spherical valves, incorporating a brass or stainless
    steel (Models: BVAL103001, BVAL103002 and BVAL103003) ball, PTFE seats and EPDM
    ‘O’-rings with single lever operating members
    
    Maximum working pressure and operating temperature: 25.0 Bar @ 65.0°C
    Maximum working pressure and operating temperature: 20.0 Bar @ 82.0°C
    
    Marking: Reliance logo, PN and DN on body.
    
    Reliance logo, Reliance valves, on, off and double headed arrow on handle.

[3] Description: Range of bronze bodied spherical valves, incorporating a brass ball, PTFE
    seats and EPDM ‘O’-rings with single lever operating members.
    
    Maximum working pressure and operating temperature: 25.0 Bar @ 65°C
    Maximum working pressure and operating temperature: 20.0 Bar @ 82°C
    
    Marking: Reliance logo, PN and DN on body.
    
    Reliance logo, Reliance valves, on, off and double headed arrow on handle.

[5] Description: Range of handwheel operated gate valves with brass bodies and gates. 
    
    Max working pressure and operating temperatures: 16.0 bar at 65°C.
    Max working pressure and operating temperatures: 10.0 bar at 82°C.
    
    Marking: Reliance logo, CR, PN16, DN on body.
    Reliance and Reliance logo on operating wheel.

[6] Description: Range of manually adjustable thermal balancing valves (brass body) supplied
    with a temperature gauge.
    
    Marking: Main Body: Flow arrow, “DN” and “DR”,Reliance Logo and “RELIANCE VALVES” and
    triangle shaped indicator. Batch coding of “DWWYYLL” where D=Day, WW= Week, YY =year and
    LL=Production Line. “40-45-50-55-60-65°C on top of valve

[7] Description: Range of spherical valves with brass bodies (nickel plated), brass ball,
    PTFE seats and EPDM ‘O’-rings. For use with Polybutylene pipe (manufactured to BS7291
    part 2), PEX pipe (manufactured to BS7291 part 3) and copper pipe (manufactured to EN
    1057).
    
    Marking: Reliance Logo, size and PN on body

[8] Description: Range of in-line lever operated spherical (SB2415) or screwdriver operated
    servicing (SB1915 & SB1922) valves with chromium plated brass bodies and balls, EPDM
    seals and ‘SharkBite’ push fit end connections. For use with PB pipe manufactured to
    EN7291-2:2010, PEX Pipe Manufactured to EN 7291-3:2010 and copper pipe manufactured to
    EN1057
    
    Maximum working pressure:
    12.5 Bar at 20°C (PEX & PB Pipe)
    6.0 Bar at 95°C (PEX & PB Pipe)
    20.0 Bar at 20°C (Copper Pipe)
    16.0 Bar at 95°C (Copper Pipe)
    
    Marking: Sharkbite, CR mark, size, date of manufacturer (WW/YY) and flow arrow on body

[9] Description: Range of drain cock elbows incorporating a DZR brass body with EPDM
    ’O’-rings (ZELB250445 model) or NBR ‘O’-rings (ZELB250446). Both models are for use with
    copper pipe (manufactured to BS EN 1057).
    
    Marking: RWC, CR, Size and BS2873 on body. RWC, Size and EN1254-2 on compression nut.
    
    Note: Drain valves must discharge via an air break to prevent return of contaminated
    water.  Suitable air breaks must qualify to clause 9 of BS EN 1717:2000, or be a
    recognised fluid category 5 backflow protection device.

[1] ‘Easiset 320 series’ adjustable (in-line) pressure reducing valves with DZR brass
    bodies. 
[2] Compression and pushfit models are for use with copper pipe (manufactured to BS EN
    1057:2006+A1:2010).
[3]  Maximum inlet supply pressure 16.0 bar.
[4] Adjustable outlet pressure 1.5 bar to 5.5 bar. 
[5] Marking: SHARKBITE (brand of Reliance Worldwide Corporation (UK) Ltd), Sharkbite logo
    (silhouette of a shark) and size on fittings.
[6] The fitting is to be so installed as to be readily accessible for examination, test,
    maintenance, replacement or operation.

[7] Drain cock elbow incorporating a DZR brass body and EPDM ’O’-rings, for use with Copper
    Pipe (BS EN 1057:2006+A1:2010).
[8] Markings: RWC, CR and size on body.

[9] Spherical valve with brass body and ball with a lever operating member
[10] 15mm compression x 10mm hose union 
[11] Marking RWC, size and BS EN 1254-2 on Compression Nut

[14] Range of 2, 3 and 4 port DZR brass Potable Water Manifolds incorporating a screw down
     stop valve at each port and brass compression adaptors 
[16] 3/4" BSP (M) x 15MM PUSH FIT 3 PORT MANIFOLD
[17] 3/4" BSP (M) x 15MM PUSH FIT 4 PORT MANIFOLD
[18] 3/4" BSP (M) X 3/4" BSP (M) 2 PORT MANIFOLD 
[19] 3/4" BSP (M) X 3/4" BSP (M) 3 PORT MANIFOLD 
[20] 3/4" BSP (M) X 3/4" BSP (M) 4 PORT MANIFOLD 
[21] 3/4" BSP (M) X 15MM PUSH FIT 2 PORT MANIFOLD
[22] 3/4" BSP (M) X 15MM PUSH FIT 3 PORT MANIFOLD
[23] 3/4" BSP (M) X 15MM PUSH FIT 4 PORT MANIFOLD
[24] EUROCONUS FITTING 15MM (Compression) (for use with: MANA500552/MANA500553/MANA500554)
     SOLD SEPERATELY 
[25] MANA500522, MANA500523, MANA500524 & JGMAN 2/3/4 for use with copper pipe (EN1057) & BPB
     pipe (BS EN 7291) and BPEX pipe (BS EN 7291)
[26] MANA500552, MANA500553 and MANA500554 for use with Euroconus Fittings (MFIT100053)
[27] Inserts to be used for PB and PEX pipes
[28] Maximum working pressure 10 bar at 82°C and 16 bar at 23°C.
[29] Markings: John Guest or RWC on operating members and size stamped on body.

[1] Description: Range of lever operated spherical valves incorporating brass bodies and
    brass ball (various finishes) to be used with PEX pipe (manufactured to BS7291 part 3),
    Polybutylene Pipe (manufactured to BS7291 Part 2) and copper pipe (manufactured to
    EN1057)
    
    Maximum working pressure 6.0 bar (for PEX and Polybutylene pipe). 
    Maximum working pressure of 20.0 bar (for copper pipe).
    
    Chrome plated:
    SB2715 – 15mm Push fit x 15mm Push fit.
    SB2722 – 22mm Push fit x 22mm Push fit.
    SB2728 – 28mm Push fit x 28mm Push fit.
    
    Nickel plated:
    SB3515B - 15mm Push fit x 15mm Push fit
    SB3515R - 15mm Push fit x 15mm Push fit.
    SB3522B - 22mm Push fit x 22mm Push fit.
    SB3522R - 22mm Push fit x 22mm Push fit.
    
    Marking:Sharkbite logo (shark), Size and Pressure on Body. Sharkbite logo (shark), size
    and SXXXX (S represents manufacturer location), Date of manufacturer (WWYY) on Push fit
    and caps.

[1] Description: Floreg range of in-line lever operated spherical valves with DZR brass
    bodies (brushed chrome plated) and balls. The valves incorporate stainless-steel mesh
    strainers and flow regulators. 
    
    Marking: Body: RWC Logo, Direction Arrow, CR, Valve size and DOM (WWYY), Nut: “RWC”
    “864-2” “15mm” “B”. Marking Plate (Indice): XX L/min (unique per product)

[2] Description: Floguard range of in-line non-verifiable double check valve assemblies
    consisting of a spring loaded resilient trim single check valve cartridge housed within
    a DZR brass body (FLOW230002 model is nickel plated). Compression models are for use
    with copper pipe (manufactured to BS EN 1057).
    
    Marking: Reliance Worldwide Corporation ‘R’ logo, flow arrow, CR & size on body 
[3] Description: Range of single check valve assemblies consisting of a single check valve
    cartridge housed within a DZR brass body
    
    Marking: RWC logo, CR, flow arrow, size, EB on body.

[1] Screw down stop valve with  brass body (STAP100009) and bonnet, incorporating NBR
    sealing washer and a  Dome type operating member. For use with Copper pipe (BS EN 1057:
    2006+A1:2010).
    
    Markings: Reliance logo on body

[1] Range of Automatic air venting/anti vacuum valves with DZR brass bodies and EPDM o
    rings. 
[2] Markings RWC and DR mark on body, "K" style logo, "Vacuum Breaker" and PAT number on cap.

[4] CWIC110001: 3.0 bar outlet pressure, CWIC110002: 3.5 bar outlet pressure
[5] Range of cold-water inlet control groups consisting of an in-line, pre set pressure
    reducing valves, strainer and expansion relief valve set at 8 bar for model CWIC110001
    and 6 bar for model CWIC110002. Model CWIC110001 is supplied with quarter turn isolating
    ball valve. Product also incorporates single check valve cartridges, verified by test
    (suitable for backflow protection against Fluid Category 2). CWIC110001 IS suited for
    copper pipe manufactured to BS EN 1057 and PEX pipe manufactured to BS7291-3. CWIC110002
    is suitable for PB pipe manufactured to BS7291-2.
[6] Marking: Pressures printed on on plastic ID collar. SYR and pressure on expansion relief
    valve cap. DR and direction of flow arrow on brass body.

[13] Range of ‘Reliance 315i Commercial Pressure Reducing Valves’ with DZR brass bodies, EPDM
     diaphragms & EPDM or NBR seals and stainless steel strainers. Maximum working pressure
     25.0 bar. Maximum outlet pressures – 1.0 bar to 6.0 bar.
[14] 315010 range 1.5 bar to 6.0 bar.
[15] Markings: RELIANCE WATER CONTROLS on pressure adjuster. DR, size and flow arrow on body.

[16] Range of combined temperature and pressure relief valves incorporating DZR brass bodies,
     and a silicone diaphragm. The valves are pre set at 4.5, 6.0, 7.0 or 10bar (see models).
     The valves incorporate a manually operated rotational easing gear
     
     Models PTEM540040 and PTEM540045 added June 2024
[17] For use with copper pipe (EN1057)
[18] Markings: Reliance, EN 1490, WRAS maximum working temperature, pressure and technical
     information on cap. DR cast on body

[19] enant valve plus range of pressure reducing valves with DZR brass bodies incorporating a
     ball valve, pressure gauge and Class D water meter adaptor. The outlet incorporates a
     double check valve (suitable for backflow prevention against Fluid Category 3).
[20] Minimum outlet pressure 1.5 bar. Maximum outlet pressure 6 bar
[21] Marking RWC, PN, DR, DN and flow arrow on body. Reliance valves, pressure and max temp
     on pressure reducing valve ring. RWC and flow arrow on insulation jacket
[22] Class D water meter adaptor for use with TVAP201001 or TVAP201005 
[23] These Valves have been designed to allow temporary servicing of downstream equipment and
     must only be used in the fully open or fully closed position. DO NOT USE THESE VALVES;
     in a partially open position to control flow; or to provide permanent termination; or
     without tubing assembled, or plugged or with threaded connections sealed; nor as a tap

[24] Range of pressure relief valve manifolds with DZR brass bodies and EPDM O-rings. The
     product incorporates a non-return valve in the inlet of the product, not suitable for
     backflow prevention. 
[25] Pre-set at 6 bar
[26] Pre-set at 8 bar
[27] 28mm compression inlet and outlet on valve body. 22mm compression outlet on pressure
     relief valve.
[28] Markings: RWC, SYR, DR and Flow Arrows on Lower Body. SYR and Flow Arrows on Upper Body.
     Reliance Water Controls and Pressure on Cap.

[30] Range of pressure reducing valves with DZR brass bodies 
[31] The inlets incorporate a stainless steel strainer
[32] Maximum inlet working pressure 25 bar outlet pressure range is 5 to 10 bar
[33] Markings Reliance Water Controls or RWC on pressure adjuster. DR, size and flow arrow on
     body.

[34] Range of combined temperature and pressure relief valves incorporating DZR brass bodies,
     and a silicone diaphragm. The valves are pre-set at 4.5, 6.0, 7.0 or 10 bar (see models)
[35] Markings: RWC, flow arrow and CR on body. Reliance, PN and temperature on cap

[36] 312 Compact range of in-line, cold and hot water pressure reducing valves with DZR brass
     bodies and stainless-steel strainers. For use with copper pipe to BS EN
     1057:2006+A1:2010, polybutylene pipe (manufactured to BS7291-2) and PEX pipe
     (manufactured to BS7291-3)
[37] Maximum inlet supply pressure 16.0 bar. Outlet supply pressure is adjustable within the
     range of 1.5 bar to 6.0 bar.
[38] This valve also comes with a loose gauge in the box.
[39] RWC logo, DN, DR, flow arrow and pressure on body.

[44] Range of 22mm compact inlet control valves with DZR brass bodies. The models feature a
     pressure relief valve and a non-adjustable  pressure reducing valve. All models have a
     non-return valve and stainless steel strainer.  For use with copper pipe to BS EN
     1057:2006+A1:2010, PB pipe (with inserts) to BS EN 7291-2:2010 and PEX pipe (with
     inserts) to BS EN 7291-3:2010.
[45] Model CWIC355040 comes supplied with a tundish
[46] Markings RWC, SYR, DR and Flow Arrow on Valve Body. Reliance Water Controls and Pressure
     on Pressure Reducing Ring. SYR and Flow Arrow on Pressure Relief Valve. Reliance Water
     Controls and Pressure on Pressure Relief Cap.

[47] Range of tundishes with black plastic bodies and a straight through pattern. The
     tundishes comply with the requirements of an air gap to drain.
[48] Markings: Syr & RWC logo on body. Model TUND300003 Reliance logo on body.

[49] Description: Range of inlet control valves with DZR brass bodies, consisting of a
     pressure reducing valve and pressure relief valve which incorporates an approved check
     valve cartridge, however, the complete products have not been fully tested to
     demonstrate they provide backflow protection
     
     Marking: RWC logo, SYR, size, DR and flow arrow on body
     
     Outlet pressures and relief valve pressures
     CWIC351300 1.0 bar minimum to  3.5 bar (preset) maximum outlet pressure, 6.0 bar
     pressure relief valve
     CWIC351301 1.0 bar minimum to 2.1 bar (preset) maximum outlet pressure, 8.0 bar pressure
     relief valve
     CWIC351303 1.0 bar minimum to 3.5 bar (preset) maximum outlet pressure, 8.0 bar pressure
     relief valve
     CWIC351306 1.5 bar minimum to 6.0 bar maximum outlet pressure, 8.0 bar pressure relief
     valve

[50] Description: Range of pressure reducing valve or combined isolation and drain off valve
     assemblies with brass bodies
     
     Models TVAP250001 & TVAP250005, TVAP250001 & TVAP250005 are pressure reducing valves
     which incorporate an isolation valve, a pressure gauge and double check valve
     cartridges, verified by test (suitable for backflow protection against Fluid Category
     3). Outlet pressure setting is adjustable in the range 1.5 to 6 bar
     Models TVAP250001 & TVAP250005 also incorporate a water meter port
     Models TABV250001 & TAVB250005 are combined isolation and drain off valves only
     
     Marking: The pressure reducing valves are marked with the Reliance logo, size, PN & DR
     cast into body. Pressure, temperature and reliance on body of PRV. NSF Mark not present
     on samples
     The combined isolation valves are marked with the Reliance logo, flow arrow, size, DR
     and flow arrow on body

[51] Description: Range of combination valves consisting of a spherical valve, water meter
     port, pressure reducing valve with stainless steel strainer, pressure gauge & a double
     check valve, verified by test (suitable for backflow protection against Fluid Category
     3)
     
     Marking: SYR logo, flow arrow, DR and supplier number on body.
     RWC logo, PN and temperature on prv cap

[52] Range of dry trap tundishes with plastic bodies incorporating a spring loaded diaphragm
     on the outlet 
     TUND600005 15mm compression inlet x 22mm compression outlet.
     TUND600010 15mm compression inlet x 32mm compression outlet.
     
     Marking: RWC logo on body, RWC logo on adhesive label on body

[53] Description: Range of pressure reducing valve assemblies with brass bodies incorporating
     spherical stop valve, pressure gauge and double check valve cartridges, verified by test
     (suitable for backflow protection against Fluid Category 3). 
     Models TVAP250001 & TVAP250005 also incorporate a water meter port. Models TABV250001
     and TABV250005 are a combined ball type stop valve and drain off valve with brass bodies
     and EPDM O-rings.
     
     Marking:  Models TABV250001 and TABV250005Reliance logo, flow arrow, size, DR and flow
     arrow on body.  All other models marked with Reliance logo, size, PN, DR cast into body
     Pressure, maximum temperature and reliance on body of PRV.

[54] Description: Range of anti-legionella, quarter turn angled ball valves with lever type
     operating members, brass bodies, plastic balls, EPDM ‘O’-rings and EPDM seals. The
     products also incorporate a drain valve.
     
     Marking: RWC Logo, DN, PN, Flow arrow and DR on valve body

[55] Description: Range of angled pressure relief valves (pre-set at various pressures) with
     DZR brass bodies and EPDM diaphragms.
     
     Marking: Reliance, Model, Pressure and size on cap. SYR, DR and Flow arrow on body

[56] Description: Range of in-line adjustable pressure reducing valves with DZR brass bodies
     and EPDM diaphragms. Maximum supply pressure 16.0 bar. Outlet pressure setting is
     adjustable in the range 1.5 to 6.0 bar. Maximum operating temperature 65°C.
     
     Marking: RELIANCE WATER CONTROLS on pressure adjuster. Flow arrow, DN and DR on body.

[57] Description: Range of in-line, adjustable, pressure reducing valves with DZR brass
     bodies and EPDM O-rings. For use with copper pipe to EN 1057. Maximum inlet pressure
     16.0 bar. The maximum outlet pressure is factory pre-set but adjustable between 1.5 bar
     & 5.5 bar. Maximum operating temperature 30°C
     
     Size: 15mm or 22mm compression fittings inlet and outlet
     
     Marking: RWC logo and pressure on ring. DR and flow arrow on body. Manufacturing date
     (WW/YY) on cap.

[58] Description: Range of pre-set pressure (dependent on model) relief valves (spring
     loaded) with DZR brass body, incorporates check valve cartridge(s), verified by test
     (suitable for backflow protection against Fluid Category 2 or 3) and EPDM O rings.
     
     Marking: RWC, SYR, flow arrow and DR on body. DN, Reliance and pressure on cap

[59] Description: Range of cold water inlet control groups with DZR brass bodies consisting
     of an in-line, manually adjustable pressure reducing valve, and a pressure relief valve.
     The compression connections are for use with copper pipe to BS EN 1057:2006+A1:2010
     only. The products also incorporate a single check valve cartridge, verified by test
     (suitable for back flow protection against Fluid Category 2) and a stainless-steel
     strainer. The pressure relief valve is fitted with a rotary type easing gear. Models
     feature an analogue display on side of valve body.
     
     Maximum inlet pressure is 16.0 bar (copper only) or 12.0 bar (PEX & PB)
     
     CWIC351300 - Pressure reducing valve adjustment range: 1.0-3.5 bar. The pressure relief
     valve is pre-set at 6.0 bar 
     CWIC351301 - Pressure reducing valve adjustment range: 1.0-2.1 bar. The pressure relief
     valve is pre-set at 8.0 bar 
     CWIC351303 - Pressure reducing valve adjustment range: 1.0-3.5 bar. The pressure relief
     valve is pre-set at 8.0 bar 
     CWIC351305 - Pressure reducing valve adjustment range: 5.0-10.0 bar. The pressure relief
     valve is pre-set at 13.0 bar 
     CWIC351306 - Pressure reducing valve adjustment range: 1.5-6.0 bar. The pressure relief
     valve is pre-set at 8.0 bar 
     
     Marking: Reliance Water Controls or RWC and operating pressure on cap. Size, flow arrow
     and DR on body.

[60] Description: Range of adjustable in-line pressure reducing valves with bronze bodies,
     stainless steel strainers and manually operated pressure reducing mechanism. Outlet
     pressure adjustable between 1.5 to 6.0 bar. Maximum supply pressure 16.0 bar. Maximum
     operating temperature 60°C.
     
     Marking: Reliance logo, model and other technical information on adhesive label on cap.
     Size and flow arrow on body.

[61] Description: Combined temperature and pressure relief valves pre-set at 7.0, 10.0 or
     15.0 bar with a DZR brass body.
     
     Marking: SYR, Flow arrow and DR on body. Reliance water controls, size, temperature,
     pressure and model name on top of cap

[1] Tundish with a black plastic body and a straight through pattern. The tundish complies
    with the requirements of an air gap to drain.
[2] Marking RWC, WRAS on body

[1] Description: Range of angled pressure relief valves (pre-set at various pressures) with
    DZR brass bodies and EPDM rubber diaphragms. PREL107020 is for use with copper pipe
    manufactured to BS EN 1057:2006+A1:2010.
    
    Size: 1/2"" BSP male inlet x 1/2"" BSP female outlet (PREL107015)
    1/2"" BSP male inlet x 15mm compression outlet (PREL107020).
    
    PREL107015 (Preset at 6.0 bar)
    PREL107020 (Preset at 3.5 bar).
    
    Marking:CR, flow arrow and P+C on body. RWC, CR, pressure and date of manufacture
    (DD/MM/YY) on cap

[1] Description: Range of DR brass spherical valves with chrome plated or IR REDOX plated
    bodies and and lever, butterfly or extended stem handles
    
    Description: VIR logo, made in Italy, CR, PN and size on valve body

[1] Range of PVC, hytrel lined multilayer flexible hose assemblies with a variety of end
    connectors. Models are supplied with EPDM 'O' rings and seals. Some models incorporate
    lever operated isolation valves
[2] Maximum working pressure 12.0 bar (at 20°C) or 6.0 bar (at 65°C)
[3] Markings: JOHN GUEST Logo, WRAS, Date of Manufacture (YYWW), Max Temperature and Max
    Pressure Printed on Hose. JOHN GUEST Logo, Size and Max Temperature on Connector

[1] Range of tundishes with black plastic bodies and a straight through pattern. The
    tundishes comply with the requirements of an air gap to drain.
    
    Markings: RWC Tund and model on body