NSF Product and Service Listings

These NSF Official Listings are current as of Thursday, December 4, 2025 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.

Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/food/Listings.asp?CompanyName=bk+resources&

NSF/ANSI 2
Food Equipment


 
BK Resources 
120 Frontage Road
Altamont, IL 62411 
United States 
888-310-4393 
618-483-9887
Visit this company's website

Facility : # 1 BKUS


Equipment custom built in compliance with NSF Standard 2‡ [1] 

‡ This manufacturer is not authorized to use the NSF Mark in association with any
  electrical or gas operated products that are designed to provide safe temperatures
  during the storage, holding, rethermalization, or rapid pull down of food products.
[1] Custom units can be installed with NSF catalog listed units and/or NSF listed hot wells.

Beverage Table[2] [3]
  BEVT-30(1)(2)
  
[2] Available with 18”, 24”, or 36” Urn Trough.
[3] (1) Variable suffix indicating length of unit in inches:
        : 48
        : 60
        : 72
    (2) Variable suffix R or L designating right or left sink design.

Cabinet Base Serving Counter[4]
  SECT-(1)(2)(3)
  
[4] (1) Variable suffix indicates depth in inches:
        - 24
        - 30
    (2) Variable suffix indicates length in inches:
        - 48
        - 60
        - 72
    (3) Optional suffix of “S” for sliding doors

Cabinet Base Urn Stand[5]
  US-30(1)(2)(-3)
  
[5] (1) Variable suffix indicates length in inches:
        - 48
        - 60
        - 72
    (2) Variable suffix indicating:
        S - Self-Serve
        C - Cashier Serve
    (3) Optional suffix of “S” for sliding doors

Cocktail Station
  CKTST-3354OS
  CKTST-3554

Compartment Sink[6]
  BKS-1-(1)-(2)-(3)(4)
  BKS-2-(1)-(2)-(3)(4)
  BKS-3-(1)-(2)-(3)(4)
  BKS-4-(1)-(2)-(3)(4)
  BKS6-1-(1)-(2)-(3)(4)
  BKS6-2-(1)-(2)-(3)(4)
  BKS6-3-(1)-(2)-(3)(4)
  BKS6-4-(1)-(2)-(3)(4)
  
[6] (1) Represents a two or four-digit numerical suffix indicating dimensions of bowl in
    inches	
    (2) Represents a two-digit numerical suffix indicating bowl depth in inches	
    (3) Represents a two-digit numerical suffix indicating the length of the drainboard in
    inches	
    (4) Represents an optional one-digit alphabetical suffix indicating drainboard options:
        L - Left
        R - Right
        T - 2

Ice Bin with Cold Plate[7]
  BKIB-CP(1)-(2)(3)-(4)
  BKIB-CP(1)-(2)(3)-(4)KITS
  UB4-(4)-IBCP(2)-(1)
  
[7] (1) Number indicates number of circuits. 
    (2) 2-digit number indicating length of the unit. 
    (3) 2-digit number indicating depth of the bowl. 
    (4) 2-digit number indicating width of the unit.

Portable Beverage Center[8] [9]
  PBC-30(1)(2)
  
[8] (1) Variable suffix indicating length of unit in inches:
        : 48
        : 60
    (2) Optional suffix “S” to indicate sliding doors option.
[9] The ice bin included on this unit is not intended to store ice for human consumption.

COMPONENTS:

Casters[10]
  25SBR-(1)-(2)-(3)-(4)
  3SBR-(1)-(2)-(3)-(4)
  4SBR-(1)-(2)-(3)-(4)
  5HBR-(1)-(2)-(3)-(4)
  5SBR-(1)-(2)-(3)-(4)
  5SBR-WS1-PS4
  5SS-(1)-(2)-(3)-(4)
  
[10] (1) Indicates mounting method
         UP4   - 4" x 4" Universal Plate
         UP3   - 3-1/2" x 3-1/2" Universal Plate
         UP3AD - 3-1/2" x 3-1/2" Univeral Plate Adjustable Height
         R1PT  - 2-1/2" x 3-5/8" Plate Adjustable Height
         TR5   - 5-3/8" x 7-1/2" Triangular Plate
         RA    - Expanding Stem - 1 5/8"
         1RA   - Expanding Stem - 1"
         2RA   - Expanding Stem - 1 1/4"	
         3RA   - Expanding Stem - 1 1/2"	
         4RA   - Expanding Stem - 2"
         4ST   - 1/2"-13 x 1" Threaded Stem
         9ST   - 3/4"-10 x 1" Threaded Stem
         15ST  - 1/2"-13 x 3/4" Threaded Stem
         1PT   - 2-3/8" x 3-5/8" Plate
         1ST   - Pop In Stem
     (2) Indicates wheel material
         LDP - Polyolefin
         GR  - Gray Rubber
         HR  - Hard Rubber
         PH  - Phenolic
         PLY - Polyurethane
         SR  - Soft Rubber
     (3) Indicates brake type
         TLB - Top Lock Brake
         TAB - Toe Activated Brake
         TTB - Total Lock Brake
     (4) Indicates optional set of 4 or 6
         PS4 - Set of 4
         PS6 - Set of 6
         4   - Set of 4
         6   - Set of 6


Facility : # 1 TJCH


Blender Station
  BKUBS-1410BS
  UB4-21-1410BSS
  BKUBS-1410BS-18

Cabinet Base Work Table[1]
  BKDCR5-(1)(2)(3)(4)
  CSTR5-(1)(2)(3)(4)
  
[1] (1) Variable suffix indicates width in inches:
        -24
        -30
     (2) Variable suffix indicates length in inches”
        -36
        -48
        -60
        -72
    (3) Variable suffix indicating “S” for sliding doors or “H” for hinged doors.
    (4) Optional “L” suffix to indicate lock on hinged door.

Compartment Sinks[2]
  BKS-2-(1)-(2)-(3)(4)
  BKS-1-(1)-(2)-(3)(4)
  BKS-3-(1)-(2)-(3)(4)
  BKS6-4-(1)-(2)-(3)(4)
  BKS6-3-(1)-(2)-(3)(4)
  BKS-4-(1)-(2)-(3)(4)
  BKS6-2-(1)-(2)-(3)(4)
  BKS6-1-(1)-(2)-(3)(4)
  
[2] (1) represents a four-digit numerical suffix indicating dimensions of bowl in inches
    (2) represents a two or four-digit numerical suffix indicating dimensions of bowl in 
        inches numerical suffix indicating bowl depth in inches     
    (3) represents a two-digit numerical suffix indicating the length of the drainboard in 
        inches
    (4) represents an optional one-digit alphabetical suffix indicating drainboard 
        options: 
        L - Left
        R - Right
        T - 2

Dish Cabinet[10]
  CST-(1)(2)
  BKDC-(1)(2)
  
[10] (1) Indicates depth.
     (2) Indicates length.

Dish Table
  BKSDT-CO3-2012-LS
  BKUCDT-50-L-SS
  BKUCDT-60-L
  BKSDT-(1)-(2)-SS[4]
  BKSDT-3-(1)-(2)-(3)-(4)[3]
  BKSDT-CO3-2012-RS
  BKSDT-(1)-(2)[4]
  BKUCDT-50-R
  BKUCDT-50-R-SS
  BKUCDT-60-L-SS
  BKUCDT-60-R
  BKUCDT-60-R-SS
  BKUCDT-(1)-(2)-(P-G)[4]
  BKUCDT-50-L
  
[3] (1) Bowl size
    (2) Bowl depth
    (3) Drain board length
    (4) Designation of drain board location - (L, R, T)
[4] (1) Indicates length in inches
    (2) Indicates drainboard position; R - Right, L - Left

Double Pot Rack[5]
  BK-WPR2-(1)
  
[5] (1) Indicates length
    (2) Indicates width

Drain Board[6]
  UB4-(2)-DB(1)
  BKUBD-(1)-(2)
  
[6] (1) Indicates length in inches.
    (2) Indicates width in inches.
    (3) Indicates type of base: S or G.

Dump Sink
  BKUBS-1014HS
  BKUBS-1014HS12-18S
  BKUBS-1014HS-18
  UB4-21-1014HSS12
  UB4-21-1014HSS
  UB4-18-1014HS
  UB4-18-1014HS12
  BKUBS-1014HSS12

Dump Sink with Towel Dispenser
  BKUBS-1012HST-218S
  BKUBS-1012HST-221S
  BKUBS-1012HST-518S
  UB4-21-1012HST-15
  UB4-18-1012HST-12
  UB4-21-1012HST-12
  UB4-18-1012HST-15
  BKUBS-1012HST-521S

Economy Compartment Sinks[7]
  ES-(1)-(2)-(3)-(4)
  
[7] (1) Numerical suffix indicating number of bowls.
    (2) Numerical suffix indicating length of bowl in inches.
    (3) Numerical suffix indicating depth of bowl in inches.
    (4) Alphanumeric suffix representing drainboard length in inches and drainboard location
    (L -left, R-right, T-two).

Equipment Stand[5]
  VETS-(1)(2)
  SVET-(1)(2)-6
  VETS-(1)(2)-6
  SVET-(1)(2)
  
[5] (1) Indicates length
    (2) Indicates width

Equipment Stand - Galvanized Base
  MST-2424G
  MST-3630G
  MST-3030G
  MST-3024G

Equipment Stand - Stainless Steel Base
  MST-2424S
  MST-3630S
  MST-3030S
  MST-3024S

Food Truck Wash Station
  FTWS-4829L

Glass Cabinet[8]
  UB4-21-GC(1)
  BKUBGC-(1)
  
[8] Suffix number indicates size of unit.

Handwash Sink
  BKHS-W-1410-PED-P
  BKHS-W-1410-PED

Ice Bin
  BKIB-(1)(2)-(3)[9]
  BKIB-(1)(2)-(3)KITS[9]
  UB4-(3)-IB(1)
  BK-MIB-(1)(2)[34]
  BK-DIBL-(1)(2)[10]
  
[9] (1) 2-digit number indicating length of the unit.
    (2) 2-digit number indicating depth of the bowl.
    (3) 2-digit number indicating depth of the unit.
[10] (1) Indicates depth.
     (2) Indicates length.
[34] (1) 2-digit number indicating overall length of the unit.
     (2) 2-digit number indicating overall width of the unit.

Ice Bin with Sink
  BK-DIBHL-2118-P-G
  BK-DIBHL-2118

Ice bin with Water Station
  BK-DIWSBL-2118G-P-G
  BK-DIWSBL-2118X
  BK-DIWSBL-2118X-P-G
  BK-DIWSBL-2118G

Microwave Shelf[11] [12]
  BKMWS-(1)(2)
  
[11] (1) Indicates depth
     (2) Indicates width
[12] NSF Certified production beginning 03/17/2010.

Multi Station Hand Washing Sink[13]
  MSHSA-48W1
  MSHSA-60W1
  MSHSA-96W1
  MSHSA-60W2
  MSHSA-48W2
  MSHSA-96W2
  MSHSA-72W2
  MSHS-(1)(2)(3)
  MSHSA-72W1
  
[13] (1) Two-digit numerical suffx indicating the length of sink in inches.
     (2) One letter suffix indicating wall of Floor Mount (W) or (F).
     (3) One-digit numerical suffix indicating hole configuration, 1 or 2 per station.

Next Generation Shelving[14]
  BK2-SNGWS-(1)-(2)
  BK2-ANGWS-(1)-(2)
  BK1-SNGWS-(1)-(2)
  BK1-ANGWS-(1)-(2)
  
[14] (1) Depth of shelf
     (2) Length of shelf

Over Shelf
  BK-OSS-1248
  BK-OSD-1272
  BK-OSD-1248
  BK-OSD-1284
  BK-OSS-1260
  BK-TSH-22
  BK-TSH-42
  BK-TSH-63
  BK-OSD-1824
  BK-OSD-1836
  BK-OSD-1848
  BK-OSD-1860
  BK-OSD-1872
  BK-OSD-1884
  BK-OSD-1896
  BK-OSS-1824
  BK-OSS-1836
  BK-OSS-1848
  BK-OSS-1860
  BK-OSS-1872
  BK-OSS-1884
  BK-OSS-1896
  STE-2-0SS
  STE-3-0SS
  STE-4-0SS
  STE-5-0SS
  BK-OSS-1296
  BK-OSS-1224
  BK-OSS-1284
  BK-OSS-1272
  BK-OSD-1224
  BK-OSD-1236
  BK-OSS-1236
  BK-OSD-1296
  BK-OSD-1260

Pass Through Shelves[15]
  PTS-(1)(2)-(3)
  
[15] (1) Indicates width
     (2) Indicates length
     (3) Optional suffix of “2” reflecting double shelf

Pot Rack[16]
  APR-(1)
  
[16] (1) Indicating width in inches.

Prep Work Tables with Sink Bowl[6]
  BKPT-(1)(2)-(3)-R
  BKPT-(1)(2)-(3)-L
  
[6] (1) Indicates length in inches.
    (2) Indicates width in inches.
    (3) Indicates type of base: S or G.

Single Pot Rack[5]
  BK-WPR1-(1)
  
[5] (1) Indicates length
    (2) Indicates width

Sink
  BKHS-W-SS-1-BKK
  APHS-W1410(1)[17]
  BKHS-ADA-D
  BKHS-D-1410
  BKHS-D-1410-0
  BKHS-D-1410-1-BKK
  BKHS-D-1410-1-SS-BKK
  BKHS-D-1410-1-SS-BKK-P
  BKHS-D-1410-SKTS
  BKHS-D-1410-SS
  BKHS-D-1410-SS-P
  BKHS-D-1616-SS
  BKHS-D-SS
  BKHS-D-SS-P-G
  BKHS-D-SS-SKTS-P-G
  BKHS-D-SS-SS
  BKHS-W-1310[18]
  BKHS-W-1310-P[18]
  BKHS-W-1410-1
  BKHS-W-1410-1-4D-TD
  BKHS-W-1410-1-BKK
  BKHS-W-1410-1-SS
  BKHS-W-1410-1-SS-BKK-P
  BKHS-W-1410-LS
  BKHS-W-1410-P
  BKHS-W-1410-RS
  BKHS-W-1410-SS-P
  BKHS-W-1410-SS-P-G
  BKHS-W-1620-1
  BKHS-W-1620-SS
  BKHS-W-SS
  BKHS-W-SS-1-SS
  BKHS-W-SS-P
  BKHS-W-SS-SS
  BKHS-W-SS-SS-TD
  BKHS-W-SS-SS-TD-P
  BKHS-D-SS-1-SS-BKK
  BKHS-W-1410-8
  BKHS-W-1620
  BKHS-W-1620-1-SS
  BKHS-W-SS-1
  BKHS-W-SS-P-G
  BKHS-W-SS-SS-P
  BKHS-ADA-S
  BKHS-D-SS-1-BKK
  BKHS-W-SS-1-SS-BKK
  APHS-W1410-1(1)[17]
  BKHS-ADA-D-0
  BKHS-D-1410-1
  BKHS-D-1410-1-BKK-P
  BKHS-D-1410-P
  BKHS-D-1410-SKTS-P-G
  BKHS-D-1616
  BKHS-D-SS-P
  BKHS-D-SS-SKTS
  BKHS-D-SS-SS-P
  BKHS-W-1410
  BKHS-W-1410-1-4D
  BKHS-W-1410-1-BKK-P
  BKHS-W-1410-1-SS-BKK
  BKHS-W-1410-4D
  BKHS-W-1410-4D-P
  BKHS-W-1410-4D-TD
  BKHS-W-1410-4D-TD-P
  BKHS-W-1410-P-G
  BKHS-W-1410-SS
  
[17] (1) represents a single alphabetical digit representing color of hand sink.
[18] NSF Certified production beginning 03/12/2013.

Slant Rack
  BK-SSH-21
  BK-SSH-63
  BK-SSH-42

Stainless Steel Storage Cabinet[1]
  BKWCH-(1)(2)
  
[1] (1) Variable suffix indicates width in inches:
        -24
        -30
     (2) Variable suffix indicates length in inches”
        -36
        -48
        -60
        -72
    (3) Variable suffix indicating “S” for sliding doors or “H” for hinged doors.
    (4) Optional “L” suffix to indicate lock on hinged door.

Stainless Steel Wall Shelf[14]
  BKWS6-(W)(L)
  BKWSE-(1)(2)
  BKWS-(1)(2)-PR
  BKWS-(1)(2)
  BKWS6-(W)(L)-PR
  BKWSE-(1)(2)-PR
  
[14] (1) Depth of shelf
     (2) Length of shelf

Stainless Steel Worktable - Series[5]
  CTTR5OB-(1)(2)
  CVT-(1)(2)
  CVTOB-(1)(2)
  CVTR5-(1)(2)
  QTT-(1)(2)
  QVT-(1)(2)
  QVTOB-(1)(2)
  SFTS-(1)(2)
  SVT-(1)(2)
  SVTOB-(1)(2)
  SVTR-(1)(2)
  SVTR5-(1)(2)
  VFTS-(1)(2)
  VTT-(1)(2)
  VTTOB-(1)(2)
  VTTR5-(1)(2)
  WST-(1)(2)
  WSTR5-(1)(2)
  WTT-(1)(2)
  WTTR5-(1)(2)
  CTTOB-(1)(2)
  CTT-(1)(2)
  WTTR-(1)(2)
  WSTR-(1)(2)
  VTTR-(1) (2)
  QVTR5-(1)(2)
  QTTOB-(1)(2)
  CVTR5OB-(1)(2)
  CVTCR-(1)(2)
  CTTR5-(1)(2)
  QVTR5OB-(1)(2)
  
[5] (1) Indicates length
    (2) Indicates width

Under Bar Liquor Display Cabinet[19]
  UB4-(2)-LD(1)
  BKUB-LD(1)-(2)
  
[19] (1) Length
     (2) Depth

Undercounter Dishtable[20]
  BKCDT-(1)-R
  BKCDT-(1)-L
  
[20] (1) Indicates length.

Utility Sink
  BKUS-1-18-14
  BKUS-1-24-14
  BKUS6-1-1821-14
  BKUS6-1-2421-14
  BKUS6-1-3624-14
  BKUS6-1-2421-8

Water Station
  BK-WS

COMPONENTS:

Drawer Assembly
  BKDWR-2015-ASSY
  BKDWR-2015-ASSY-SS
  BKDWR-1820-ASSY-L-SS
  BKDWR-1820-ASSY-SS
  BKDWR-1820-ASSY-L
  BKDWR-1820-ASSY
  BKDWR-2020-ASSY-L-SS
  BKDWR-2020-ASSY-L
  BKDWR-2015-ASSY-L-SS
  BKDWR-2015-ASSY-L
  BKDWR-2020-ASSY-SS
  BKDWR-2020-ASSY

Drawer Pan
  BKDWR-2020
  BKDWR-2015

Drawer Slide
  BK-SRSA-22-DL
  BK-SRSA-22
  BK-SRSA-26-DL
  BK-SRSA-16
  BK-SRSA-26
  BK-SRSA-24
  BK-SRSA-24-DL
  BK-SRSA-16-DL

Grill Organizer
  GCP-2
  GCP-18TB
  GCP-18SH
  GCP-12SH
  GCP-9PH
  GCP-6PH
  GCP-3
  GCP-1

Grill Organizer Kits
  GCP-3S-6P[23]
  GCP-3S-9P[27]
  GCP-2S-6P[24]
  GCP-2S-9P[28]
  GCP-2S[22]
  GCP-3S[26]
  GCP-1-9P[21]
  GCP-1-6P[25]
  
[21] Includes models GCP-1 & GCP-9PH.
[22] Includes model GCP-2 & GCP-12SH.
[23] Includes GCP-3, GCP-GCP-18SH & GCP-6PH.
[24] Includes model GCP-2 & GCP-12SH & GCP-6PH.
[25] Includes models GCP-1 & GCP-6PH.
[26] Includes GCP-3, GCP-GCP-18SH.
[27] Includes GCP-3, GCP-GCP-18SH & GCP-9PH.
[28] Includes model GCP-2 & GCP-12SH & GCP-9PH.

Gusset and Leg Socket
  BK-SSLSF[29]
  BK-SSLSF-3
  BK-WMLS-1[29]
  BKBS-1[29]
  BKBS-125[29]
  BK-SSLS-WP[29]
  BK-DBLS-1
  BKBS-2[29]
  BK-WMLS-WP[29]
  BK-WMLS[29]
  BK-SSLSF-2
  BK-SSLS[29]
  BK-SSLSF-15
  BK-WMLS-1-PF
  BKBS-3[29]
  
[29] NSF Certified production with beginning date code of 12/03/2009.

Handwash Sink
  BK-DIS-1014-5D
  BK-DIS-1014-5-SS
  BK-DIS-1014-2
  BK-DIS-1014-10-SS
  BK-DIS-1014
  BK-DIS-1515

Legs and Feet
  BKL-20-WP[30]
  BKL-4-NPE
  BK-PLAF
  BK-SSRFAF-WH
  BK-SPRFAF-WH
  BK-SSQFAF-WH
  BKL-20[30]
  BKL-4-BP[30]
  BKL-4-NPE[30]
  BK-SSRFAF
  BK-WPAF
  BK-SSQAF
  BKL-4-NPE-H
  BK-SPAF[30]
  BK-SSAF[30]
  BK-SSPAF
  BK-SSQAF-P
  BK-SSQFAF[30]
  BK-WMAF[30]
  BKL-1625[30]
  BKL-1625-WP[30]
  BKL-20-F
  
[30] NSF Certified production with beginning date code of 12/03/2009.

Next Generation Shelving Pot Rack Accessory[31]
  BK-NGPR-(1)
  
[31] (1) Length of rack

One Compartment Sink
  BK-DIS-2820
  BK-DIS-2016-12
  BK-DIS-2016-8
  BK-DIS-0909-5

Three Compartment Corner Sink
  BKCS-3-18-14-18T

Three Compartment Sink
  BK-DIS-1014-3[32]
  BK-DIS-1620-3
  
[32] This sink is Certified for use in mobile food carts and kiosks only.

Two Compartment Sink
  BK-DIS-2016-2
  BK-DIS-1416-2

Underbar Sink[33]
  UB4-21-(1)(2)(3)
  UB4-18-(1)(2)(3)
  BKUBS-(1)(2)(3)
  BKUBW-(1)(2)(3)
  
[33] (1) Indicates number of bowls.
     (2) Indicates overall length.
     (3) Populated by L, R, or T indicates left, right, or position of drainboards.


Facility : # 3 CACH


Cabinent Base Work Table[1]
  BKDCR5-(1)(2)(3)(4)
  
[1] (1) Variable Suffix Indicates Width in Inches:
        -24
        -30
    (2) Variable Suffix Indicates Length in Inches:
        -36
        -48
        -60
        -72
    (3) Variable Suffix Indicating "S" for Sliding Doors or "H" for hinged doors
    (4) Optional "L" Suffix to indicate Lock on hinged door

Compartment Sink[2]
  BKS-1-(1)-(2)-(3)(4)
  BKS-2-(1)-(2)-(3)(4)
  BKS-3-(1)-(2)-(3)(4)
  BKS-4-(1)-(2)-(3)(4)
  BKS6-1-(1)-(2)-(3)(4)
  BKS6-2-(1)-(2)-(3)(4)
  BKS6-3-(1)-(2)-(3)(4)
  BKS6-4-(1)-(2)-(3)(4)
  
[2] (1) Represents a two or four-digit numerical suffix indicating dimensions of bowl in 
        inches
    (2) Represents a two-digit numerical suffix indicating bowl depth in inches
    (3) Represents a two-digit numerical suffix indicating the length of the drainboard in 
        inches
    (4) Represents an optional one-digit alphabetical suffix indicating drainboard options:
        L - Left
        R - Right
        T - 2

Dish Cabinet[3]
  BKDC-(1)(2)
  CST-(1)(2)
  CSTR5-(1)(2)
  
[3] (1) Indicates Depth
    (2) Indicates Length

Dishtable
  BKSDT-(1)-(2)[4]
  BKSDT-(1)-(2)-SS[4]
  BKSDT-3-(1)-(2)-(3)-(4)[5]
  
[4] (1) Indicates Length in Inches
    (2) Indicates Drainboard Position; R - Right, L - Left
[5] (1) Bowl Size
    (2) Bowl Depth
    (3) Drainboard Length
    (4) Designation of Drain Board Location - (L, R, T)

Equipment Stand[6]
  EETS-(1)(2)
  SVET-(1)(2)
  SVET-(1)(2)-6
  VETS-(1)(2)
  VETS-(1)(2)-6
  
[6] (1) Indicates Length
    (2) Indicates Width

Stainless Steel Wall Shelf[7]
  BKWS-(1)(2)
  BKWS-(1)(2)-PR
  BKWS6-(W)(L)
  BKWS6-(W)(L)-PR
  BKWSE-(1)(2)
  BWKSE-(1)(2)-PR
  
[7] (1) Depth of Shelf
    (2) Length of Shelf

Stainless Steel Worktables[8]
  CVT-(1)(2)
  CVTR5-(1)(2)
  QVT-(1)(2)
  QVTR5-(1)(2)
  SVT-(1)(2)
  SVTR-(1)(2)
  SVTR5-(1)(2)
  VTT-(1)(2)
  VTTR-(1)(2)
  VTTR5-(1)(2)
  
[8] (1) Indicates Length
    (2) Indicates Width

Undercounter Dishtable[9]
  BKCDT-(1)-L
  BKCDT-(1)-R
  
[9] (1) Indicates Length


Facility : # 4 TIIN


Compartment Sinks[3]
  BKS-1-(1)-(2)-(3)(4)
  BKS-2-(1)-(2)-(3)(4)
  BKS-3-(1)-(2)-(3)(4)
  BKS-4-(1)-(2)-(3)(4)
  BKS6-1-(1)-(2)-(3)(4)
  BKS6-2-(1)-(2)-(3)(4)
  BKS6-3-(1)-(2)-(3)(4)
  BKS6-4-(1)-(2)-(3)(4)
  
[3] (1) represents a two or four-digit numerical suffix indicating dimensions of bowl in
    inches	
    (2) represents a two-digit numerical suffix indicating bowl depth in inches	
    (3) represents a two-digit numerical suffix indicating the length of the drainboard in
    inches	
    (4) represents an optional one-digit alphabetical suffix indicating drainboard 
    options:
        L - Left
        R - Right
        T - 2
    (5) Denotes number of bowls
    (6) Represents a two digit numerical suffix indicating bowl width in inches
    (7) Represents a two digit numerical suffix indicating bowl length in inches
    (8) Represents a two digit numerical suffix indicating the unit length in inches
    (9) Optional “-P-G” = Includes BKD-8G-G Lead-Free Faucet

Handwash Sinks
  BK-DIS-1014
  BK-DIS-1014-5D
  BKHS-W-1410-PED
  BKHS-W-1410-PED-P

Sinks
  APHS (1)(2)(3)(4)(5)(6)(7)(8)(9)(10)(11)(12)(13)(14)(15)(16)(17)
  BK-DIS (1)(2)(3)(4)(5)(6)(7)(8)(9)[2]
  BKHS (1)(2)(3)(4)(5)(6)(7)(8)(9)(10)(11)(12)(13)(14)(15)(16)(17)[1]
  DDI(5)-(3)(7)(2)(8)(9)
  
[1] (1) Optional "ADA" = ADA Sink (Bowl slanted to allow wheelchair access)	
    (2) Optional "D" = Deck Mount Faucet or "W" =Splash Mount Faucet	
    (3) Optional Four digits denoting the length and width of bowl	
    (4) Optional Three digits indicating the number and spacing of faucet holes	
    (5) Optional "1" = 1  hole faucet 	
    (6) Optional "S", "SS", "RS", or "LS" = Side Splash 	
    (7) Optional "SS" Space Saver 	
    (8) Optional "PT" = shipped with P-Trap	
    (9) Optional BKK = Knee Valve 	
    (10) Optional "4D" =3.5" drain	
    (10) Optional single digit followed by MF= NSF Listed Metering Faucet Included	
    (11) Optional PED =  Pedestal	
    (12) Optional "TD", or "SKTS" = Towel Dispenser	
    (13) Optional "LA" = Lever Drain included	
    (14) Optional "WB" =Special Box included	
    (15) Optional "ST" = Sanitizer included	
    (16) Optional "SEF" = NSF Listed Lead Free SEF Faucet Included	
    (15) Optional "B" = Blue	
    (16) Optional "E" = NSF Listed Lead Free Evolution Faucet Included	
    (17) Optional "G", "P", "P-G", or "PG" = NSF Listed Lead Free Faucet Included
[2] (1) Optional digit denoting number of bowls
    (2) Optional R with a digit denoting Riser in inches
    (3) Four to Six digits denoting length, width and depth of bowl(s) or sink
    (4) Optional two to three digits indicating the number of and spacing of the faucet
    holes
    (5) Optional digit denoting number of bowls
    (6) Optional D or 1D indicating the use of a drain board
    (7) Optional S, SS, or HS incorporating a splash guard
    (8) Optional two digits indicating length of drain board followed by R, L, or T		
    (9) Optional "P-G" or "PG" = NSF Listed Lead Free Faucet Included


Facility : # 7 MCIN


Gusset and Leg Socket
  BK-DBLS-1
  BK-SSLS[2]
  BK-SSLS-WP[2]
  BK-SSLSF[2]
  BK-SSLSF-15
  BK-SSLSF-2
  BK-SSLSF-3
  BK-WMLS[2]
  BK-WMLS-1[2]
  BK-WMLS-1-PF
  BK-WMLS-WP[2]
  BKBS-1[2]
  BKBS-125[2]
  BKBS-2[2]
  BKBS-3[2]
  
[2] NSF Certified production with beginning date code of 12/03/2009.

Legs and Feet
  BK-PLAF
  BK-SPAF[2]
  BK-SPRFAF-WH
  BK-SSAF[2]
  BK-SSPAF
  BK-SSQAF
  BK-SSQAF-P
  BK-SSQFAF[2]
  BK-SSQFAF-WH
  BK-SSRFAF
  BK-SSRFAF-WH
  BK-WMAF[2]
  BK-WPAF
  BKL-1625[2]
  BKL-1625-WP[2]
  BKL-20[2]
  BKL-20-F
  BKL-20-WP[2]
  BKL-4-BP[2]
  BKL-4-NPE[2]
  BKL-4-NPE
  BKL-4-NPE-H
  
[2] NSF Certified production with beginning date code of 12/03/2009.

COMPONENTS:

Caster[1]
  25SBR-(1)-(2)-(3)-(4)
  3SBR-(1)-(2)-(3)-(4)
  4SBR-(1)-(2)-(3)-(4)
  5HBR-(1)-(2)-(3)-(4)
  5SBR-(1)-(2)-(3)-(4)
  5SBR-WS1-PS4
  5SS-(1)-(2)-(3)-(4)
  
[1] (1) Indicates mounting method
        UP4   - 4" x 4" Universal Plate
        UP3   - 3 1/2" x 3 1/2" Universal Plate
        UP3AD - 3 1/2" x 3 1/2" Univeral Plate Adjustable Height
        R1PT  - 2 1/2" x 3 5/8" Plate Adjustable Height
        TR5   - 5 3/8" x 7 1/2" Triangular Plate
        RA    - Expanding Stem - 1 5/8"
        1RA   - Expanding Stem - 1"	
        2RA   - Expanding Stem - 1 1/4"	
        3RA   - Expanding Stem - 1 1/2"	
        4RA   - Expanding Stem - 2"
        4ST   - 1/2" - 13 x 1" Threaded Stem
        9ST   - 3/4" - 10 x 1" Threaded Stem
        15ST  - 1/2" - 13 x 3/4" Threaded Stem
        1PT   - 2 3/8" x 3 5/8" Plate
        1ST   - Pop In Stem
    (2) Indicates wheel material
        LDP - Polyolefin
        GR  - Gray Rubber
        HR  - Hard Rubber
        PH  - Phenolic
        PLY - Polyurethane
        SR  - Soft Rubber
    (3) Indicates brake type
        TLB - Top Lock Brake
        TAB - Toe Activated Brake
        TTB - Total Lock Brake
    (4) Indicates set of 4 or 6
        PS4 - Set of 4
        PS6 - Set of 6
        4   - Set of 4
        6   - Set of 6


Facility : # 8 GKIN


Stainless Steel Wall Shelf[1]
  BKWS-(1)(2)
  BKWS-(1)(2)-PR
  BKWS6-(W)(L)
  BKWS6-(W)(L)-PR
  BKWSE-(1)(2)
  BKWSE-(1)(2)-PR
  
[1] (1) Depth of Shelf	
    (2) Length of Shelf

Stainless Steel Work Table[2]
  CTT-(1)(2)
  CTTOB-(1)(2)
  CTTR5-(1)(2)
  CTTR5OB-(1)(2)
  CVT-(1)(2)
  CVTCR-(1)(2)
  CVTOB-(1)(2)
  CVTR5-(1)(2)
  CVTR5OB-(1)(2)
  QTT-(1)(2)
  QTTOB-(1)(2)
  QVT-(1)(2)
  QVTOB-(1)(2)
  QVTR5-(1)(2)
  QVTR5OB-(1)(2)
  SFTS-(1)(2)
  SVT-(1)(2)
  SVTOB-(1)(2)
  SVTR-(1)(2)
  SVTR5-(1)(2)
  VFTS-(1)(2)
  VTT-(1)(2)
  VTTOB-(1)(2)
  VTTR - (1) (2)
  VTTR5-(1)(2)
  WST-(1)(2)
  WSTR-(1)(2)
  WSTR5-(1)(2)
  WTT-(1)(2)
  WTTR-(1)(2)
  WTTR5-(1)(2)
  
[2] (1) Indicates length	
    (2) Indicates width


Facility : # 9 SGIN


Drawer Assembly
  BKDWR-1820-ASSY
  BKDWR-1820-ASSY-L
  BKDWR-1820-ASSY-L-SS
  BKDWR-1820-ASSY-SS
  BKDWR-2015-ASSY
  BKDWR-2015-ASSY-L
  BKDWR-2015-ASSY-L-SS
  BKDWR-2015-ASSY-SS
  BKDWR-2020-ASSY
  BKDWR-2020-ASSY-L
  BKDWR-2020-ASSY-L-SS
  BKDWR-2020-ASSY-SS

Equipment Stand[1]
  EETS-(1)(2)
  SVET-(1)(2)
  SVET-(1)(2)-6
  VETS-(1)(2)
  VETS-(1)(2)-6
  
[1] (1) Indicates length
    (2) Indicates width

Equipment Stand - Galvanized Base
  MST-2424G
  ST-3024G
  ST-3030G
  ST-3630G

Equipment Stand - Stainless Steel Base
  MST-2424S
  ST-3024S
  ST-3030S
  ST-3630S

Microwave Shelf[2] [3]
  BKMWS-(1)(2)
  
[2] (1) Indicates depth
    (2) Indicates width
[3] NSF Certified production beginning 03/17/2010.

Over Shelf
  BK-OSD-1224
  BK-OSD-1236
  BK-OSD-1248
  BK-OSD-1260
  BK-OSD-1272
  BK-OSD-1284
  BK-OSD-1296
  BK-OSD-1824
  BK-OSD-1836
  BK-OSD-1848
  BK-OSD-1860
  BK-OSD-1872
  BK-OSD-1884
  BK-OSD-1896
  BK-OSS-1224
  BK-OSS-1236
  BK-OSS-1248
  BK-OSS-1260
  BK-OSS-1272
  BK-OSS-1284
  BK-OSS-1296
  BK-OSS-1824
  BK-OSS-1836
  BK-OSS-1848
  BK-OSS-1860
  BK-OSS-1872
  BK-OSS-1884
  BK-OSS-1896
  BK-TSH-22
  BK-TSH-42
  BK-TSH-63
  STE-2-0SS
  STE-3-0SS
  STE-4-0SS
  STE-5-0SS

Stainless Steel Wall Shelves[4]
  BKWS-(1)(2)
  BKWS-(1)(2)-PR
  BKWS6-(W)(L)
  BKWS6-(W)(L)-PR
  BKWSE-(1)(2)
  BKWSE-(1)(2)-PR
  
[4] (1) Depth of Shelf
    (2) Length of Shelf
        PR indicates Pot Rack

Work Table[1]
  CVT-(1)(2)
  CVTR5-(1)(2)
  SVT-(1)(2)
  SVTR-(1)(2)
  SVTR5-(1)(2)
  VTT-(1)(2)
  VTTR - (1) (2)
  VTTR5-(1)(2)
  
[1] (1) Indicates length
    (2) Indicates width


 
BK Resources, Inc. 
120 Frontage Road
Altamont, IL 62411 
United States 
888-310-4393

Facility : # 2 China


Caster
  25SBR-4ST-LDP-PS4
  3SBR-15ST-LDP-PS4
  3SBR-RA-PLY-TLB
  3SBR-UP3AD-PLY-PS4
  3SBR-UP4-PLY-PS4
  4SBR-RA-HR
  4SBR-RA-HR-TLB
  4SBR-RA-PLY
  4SBR-RA-PLY-TLB
  5HBR-TR5-PLY-PS4
  5HBR-UP4-PLY-PS4
  5SBR-1PT-PLY
  5SBR-1PT-PLY-TLB
  5SBR-1ST-LDP
  5SBR-1ST-LDP-TLB
  5SBR-1ST-PLY
  5SBR-1ST-PLY-TLB
  5SBR-9ST-PH
  5SBR-9ST-PH-TLB
  5SBR-RA-GR
  5SBR-RA-GR-TLB
  5SBR-RA-LDP
  5SBR-RA-LDP-TLB
  5SBR-RA-PLY
  5SBR-RA-PLY-TLB
  5SBR-WS1-PLY-TLB
  5SBR-WS1-PS4


Facility : # 3 China


Cantilever
  BKC-1524S-3S-KD
  BKC-1827S-3S-KD
  BKC-2133S-2H-KD

Dollies and Carts
  BKC-1524S-3S
  BKC-1827S-3S
  BKC-2133S-2H

Dunnage
  BK-ADR-3618-8
  BK-ADR-3620-12
  BK-ADR-3624-12
  BK-ADR-3624-8
  BK-ADR-4818-8
  BK-ADR-4820-12
  BK-ADR-4824-12
  BK-ADR-4824-8
  BK-ADR-6018-8
  BK-ADR-6020-12
  BK-ADR-6024-12
  BK-ADR-6024-8
  BK-ST-ADR-2420-12
  BK-ST-ADR-3620-12
  BK-ST-ADR-3624-12
  BK-ST-ADR-4820-12
  BK-ST-ADR-4824-12
  BK-ST-ADR-6020-12
  BK-ST-ADR-6024-12

Pan Racks
  BK-ABPR-1
  BK-ABPR-1S
  BK-ABPR-2
  BK-ABPR-2S
  BK-ABPRZ-1
  BK-ABPRZ-1S

Shelving Acceptable for All Environments (including Refrigerators, Freezers, and Warewashing Areas)

Adjustable Shelving
  BK-ATBS-3620
  BK-ATBS-4820
  BK-ATBS-6020


BK Resources, Inc. 
120 Frontage Road
Altamont, IL 62411 
United States 
888-310-4393 
Visit this company's website

Facility : # 1 USA


Bakers Table Top (Hardwood)
  MBT-4830
  MBT-4836
  MBT-6030
  MBT-6036
  MBT-7230
  MBT-7236
  MBT-9630
  MBT-9636
  MFT-4830
  MFT-4836
  MFT-6030
  MFT-6036
  MFT-7230
  MFT-7236
  MFT-9630
  MFT-9636


 
BK Resources, Inc. 
120 Frontage Road
Altamont, IL 62411 
United States 
618-479-1217

Facility : ShenZhen, China


Cabinet[1]
  BKDC-(2)(3)
  CST(1)-(2)(3)
  
[1] (1) R5 - 5" Backsplash
        C  - Corner Cabinet
    (2) Width in inches
    (3) Length in inches
    (4) Shelf quantity

Dish Table[2]
  BK(1)DT-(2)-(3)(4)-(5)-(8)(9)S
  BK(1)DT-(6)-(9)
  BK(1)DT6-(6)-(9)-SS
  BK(1)DT6-C(6)(7)(9)
  
[2] (1) S - Soiled dish table
        C - Clean dish table
    (2) Bowl Quantity
    (3) Width of bowl in inches
    (4) Length of bowl in inches
    (5) Depth of bowl in inches
    (6) Length in inches
    (7) Width in inches
    (8) Drainboard Length in inches
    (9) Represents an optional one-digit alphabetical suffix indicating drainboard options:
        L - Left
        R - Right

Equipment Stand[3]
  EETS-(1)(2)
  EETS-(1)(2)-6
  SVET-(1)(2)
  SVET-(1)(2)-6
  VETS-(1)(2)
  VETS-(1)(2)-6
  
[3] (1) Length in inches or Width in inches
    (2) Width in inches or Length in inches

Ice Bin[4]
  UB4-(1)-IB(2)
  UB4-(1)-IBCP(2)-10
  UB4-(1)-IBCP(2)-7
  UB4-(1)-IBCP(2)-8
  
[4] (1) Width in inches
    (2) Length in inches

Microware Wall Shelf[5]
  BKMWS-(1)(2)
  
[5] (1) Length in inches
    (2) Width in inches

Mobile Ice Bin[6]
  BK-MIB-(1)(2)
  
[6] (1) Length in inches
    (2) Width in inches

Overshelf[7]
  BK-OS(1)-(2)(3)
  
[7] (1) D - Double over shelf
        S - Single over shelf
    (2) Width in inches
    (3) Length in inches

Sink[8]
  BK(6)S-(1)-(2)-(3)-(4)(5)
  BKS-(1)-(2)-(3)-(4)(5)
  BKS6-(1)-(2)-(3)-(4)(5)
  ES-(1)-(2)-(3)-(4)(5)
  
[8] (1) Number of sink compartments	
    (2) Represents a four-digit numerical suffix or a two-digit numerical suffix 
        indicating dimensions of bowl in inches
    (3) Represents a two-digit numerical suffix indicating bowl depth in inches	
    (4) Represents a two-digit numerical suffix indicating the length of the drainboard in 
        inches	
    (5) Represents an optional one-digit alphabetical suffix indicating drainboard 
        options:
        L - Left
        R - Right
        T - 2
    (6) C - Corner Sink

Slant Wall Shelf[9]
  BK-SSH-(1)
  
[9] (1) Length in inches

Underbar Sink[10]
  UB4-(1)-(2)(3)(4)S
  
[10] (1) Width in inches
     (2) Number of sink compartments
     (3) Length in inches
     (4) Blank-None Left and Right drainboard,
         Drainboard configuration: L - Left, R - Right

Work Table[12]
  CTT(1)(2)-(5)(6)
  CVT(1)(2)-(5)(6)
  QVT(1)(2)-(5)(6)
  SFTS-(5)(6)
  SVT(1)(2)-(3)(4)
  VFTS-(5)(6)
  VTT(1)(2)-(3)(4)
  
[12] (1) R - Riser
     (2) 5 - 5" Back splash
     (3) Length in inches or Width in inches
     (4) Width in inches or Length in inches
     (5) Length in inches
     (6) Width in inches

Work Table with Sink Bowl[11]
  BKMPT-(1)(2)(3)-(4)
  BKMPT-(1)(2)(3)-(4)HD
  
[11] (1) Width in inches
     (2) Length in inches
     (3) G - Not all stainless table
         S - All stainless table
     (4) Drainboard configuration: L - Left, R - Right

NSF/ANSI 4
Commercial Cooking, Rethermalization and Powered Hot Food Holding and Transport Equipment


 
BK Resources, Inc. 
120 Frontage Road
Altamont, IL 62411 
United States 
888-310-4393

Facility : # 3 China


Buffet Warmer
  EBW-2420SN
  EBW-3620SN
  EBW-4820SN
  EBW-7220SN

Heated Merchandiser[1]
  DW-1-1
  DW-1-2
  DW-1-3
  DW-2-1
  DW-2-2
  DW-2-3
  DW-3-1
  DW-3-2
  DW-3-3
  DWS-1-1
  DWS-1-2
  DWS-1-3
  DWS-2-1
  DWS-2-2
  DWS-2-3
  DWS-3-1
  DWS-3-2
  DWS-3-3
  
[1] With or without stainless steel pans.

Heated Takeout Shelves[2]
  EHTG-2
  EHTG-3
  EHTG-4
  EHTG-5
  
[2] Not intended for direct food contact. Intended for dry environments only.

Hot Food Holding Cabinet and Proofer
  HHC1N
  HPC1I
  HPC1N
  HPC2N

Shelf Warmer[3]
  ESW-1612
  ESW-2420
  ESW-3020
  ESW-3620
  ESW-4820
  ESW-6020
  
[3] Not for food direct contact.

Steam Table[4]
  ST-2
  ST-3
  ST-4
  ST-5
  ST-SW-2
  ST-SW-3
  ST-SW-4
  ST-SW-5
  
[4] Without food pan.

Strip Warmer
  HS24IA-1
  HS24IA-2
  HS24IA-3
  HS24IC-1
  HS24IC-2
  HS24IC-3
  HS24TA-1
  HS24TA-2
  HS24TA-3
  HS24TC-1
  HS24TC-2
  HS24TC-3
  HS36IA-1
  HS36IA-2
  HS36IA-3
  HS36IC-1
  HS36IC-2
  HS36IC-3
  HS36TA-1
  HS36TA-2
  HS36TA-3
  HS36TC-1
  HS36TC-2
  HS36TC-3
  HS48IA-1
  HS48IA-2
  HS48IA-3
  HS48IC-1
  HS48IC-2
  HS48IC-3
  HS48TA-1
  HS48TA-2
  HS48TA-3
  HS48TC-1
  HS48TC-2
  HS48TC-3
  HS60IA-1
  HS60IA-2
  HS60IA-3
  HS60IC-1
  HS60IC-2
  HS60IC-3
  HS60TA-1
  HS60TA-2
  HS60TA-3
  HS60TC-1
  HS60TC-2
  HS60TC-3
  HS72IA-1
  HS72IA-2
  HS72IA-3
  HS72IC-1
  HS72IC-2
  HS72IC-3
  HS72TA-1
  HS72TA-2
  HS72TA-3
  HS72TC-1
  HS72TC-2
  HS72TC-3

NSF/ANSI 7
Commercial Refrigerators and Storage Freezers


 
BK Resources 
120 Frontage Road
Altamont, IL 62411 
United States 
888-310-4393 
618-483-9887
Visit this company's website

Facility : # 1 BKUS


Custom Storage Refrigerator[1]
  
[1] With a minimum of 77.8 BTU/cu. ft.

NSF/ANSI 51
Food Equipment Materials


 
BK Resources 
120 Frontage Road
Altamont, IL 62411 
United States 
888-310-4393

Facility : Fort Wayne, IN

         Maximum Temperature 
  Trade Designation  Color   Type of Food    of Use in °F 

Silicone Sealant for Food Zone[1] [2] [3]
  BK-SC-AL  Aluminum  All food contact types  400° 
  BK-SC-CL  Clear  All food contact types  400° 
  
[1] This material is only acceptable for repeated use.
[2] This material is only acceptable for use as a sealant.
[3] Materials produced after 6/25/01 are NSF Certified.

Number of matching Manufacturers is 7
Number of matching Products is 797
Processing time was 1 seconds