NSF Product and Service Listings

[1] (1) Width in inches
    (2) Number of shelves
    (3) Spacing in inches
    (4) /B1 - Brakes
        /B2 - Locking brakes
        /B - Corner bumpers
        /CB - Continuous bumper
        /HD - Heavy duty
    (5) With or without suffix
        /6 - Third set of legs
        /520 - 5 x 2 plate caster
        /520TPR - 5 x 2 TPR plate caster
        /620 - 6 x 2 plate caster
        /620TPR - 6 x 2 TPR plate caster
        /HT - High temperature plate caster

[2] (1) Number of sink compartments
    (2) Interior dimension of sink bowl in inches from left to right
    (3) Interior dimension of sink bowl in inches from front to back.
    (4) Length of drainboard in inches.
    (5) Available with the following options
        14 - 14 gauge
        D  - Drawer
        GL - Galvanized legs
        LU - 1.5 LIP
        LX - Backsplash height
        M  - Casters
        X  - Cross brace instead of shelf
[3] May or may not have suffix for type of stainless: -200 for 200 Series, -400 for 400
    Series.

[4] (1) Width in inches
    (2) Depth in inches
    (3) Available with the following options
        Ga18 indicates the thickness of top table in gauge
          D - Drawer
        Legs Type
          LG - Galvanized legs
        1-3 digit number with LU indicates the Lip in inch.
        1-3 digit number with LX indicates the blacksplash height in inches. Such as 1LX 
        indicates 1" backsplash height.
        1-3 digit number with M indicates the Casters
          X - Cross brace instead of shelf
          O - Chrome/Stainless Overshelf
    (4) Available with the following options
        Ga18 indicates the thickness of top table in gauge
          D - Drawer
        Legs Type
          LG - Galvanized legs
       1-3 digit number with LU indicates the Lip in inch.
       Blacksplash height is 5 inches
       1-3 digit number with M indicates the Casters
          X - Cross brace instead of shelf
          O - Chrome/Stainless Overshelf
    (5) Available with the following options
        Ga18 indicates the thickness of top table in gauge
          D - Drawer
        Legs Type
          LG - Galvanized legs
        1-3 digit number with LU indicates the Lip in inch.
        Blacksplash height is 1.5 inches
        1-3 digit number with M indicates the Casters
          X - Cross brace instead of shelf
          O - Chrome/Stainless Overshelf
    (6) Available with the following options
        Ga-20 to Ga14 indicates the thickness of top table in gauge
          D - Drawer
        Legs Type
          LG - Galvanized legs
        1-3 digit number with LU indicates the Lip in inch.
        1-3 digit number with LX indicates the blacksplash height in inches. Such as 1LX 
        indicates 1" backsplash height.
        1-3 digit number with M indicates the Casters
         X - Cross brace instead of shelf
         O - Chrome/Stainless Overshelf
    (7) Available with the following options
        Ga18 indicates the thickness of top table in gauge
          D - Drawer
        Legs Type
          LS - Stainless legs
        1-3 digit number with LU indicates the Lip in inch.
        1-3 digit number with LX indicates the blacksplash height in inches. Such as 1LX 
        indicates 1" backsplash height.
        1-3 digit number with M indicates the Casters
          X - Cross brace instead of shelf
          O - Chrome/Stainless Overshelf
    (8) Available with the following options
        Ga18 indicates the thickness of top table in gauge
          D - Drawer
        Legs Type
          LG - Galvanized legs
        1-3 digit number with LU indicates the Lip in inch.
        1-3 digit number with LX indicates the blacksplash height in inches. Such as 1LX 
        indicates 1" backsplash height.
        1-3 digit number with M indicates the Casters
          X - Cross brace instead of shelf
          O - Chrome/Stainless Overshelf
    (9) Available with the following options
        Ga16 indicates the thickness of top table in gauge
          D - Drawer
        Legs Type
          LS - Stainless legs
        1-3 digit number with LU indicates the Lip in inch.
        1-3 digit number with LX indicates the blacksplash height in inches. Such as 1LX 
        indicates 1" backsplash height.
        1-3 digit number with M indicates the Casters
          X - Cross brace instead of shelf
          O - Chrome/Stainless Overshelf
    (10) Available with the following options
         Ga16 indicates the thickness of top table in gauge
           D - Drawer
         Legs Type
           LG - Galvanized legs
         1-3 digit number with LU indicates the Lip in inch.
         1-3 digit number with LX indicates the blacksplash height in inches. Such as 1LX 
         indicates 1" backsplash height.
         1-3 digit number with M indicates the Casters
           X - Cross brace instead of shelf
           O - Chrome/Stainless Overshelf
    (11) Available with the following options
         Ga18 indicates the thickness of top table in gauge
           D - Drawer
         Legs Type
           LS - Stainless legs
         1-3 digit number with LU indicates the Lip in inch.
         Blacksplash height is 1.5 inches
         1-3 digit number with M indicates the Casters
           X - Cross brace instead of shelf
           O - Chrome/Stainless Overshelf
[5] May or may not have suffix for type 200 Series to 400 Series stainless steel such as -
    200 for 200 Series, - 400 for 400 Series.
[6] (1) Width in inches
    (2) Depth in inches
    (12) Available with the following options
         Ga18 indicates the thickness of top table in gauge
           D - Drawer
         Legs Type
           LG - Galvanized legs
         1-3 digit number with LU indicates the Lip in inch.
         1-3 digit number with LX indicates the blacksplash height in inches. Such as 1LX 
         indicates 1" backsplash height.
         1-3 digit number with M indicates the Casters
           O - Chrome/Stainless Overshelf
    (13) Available with the following options
         Ga18 indicates the thickness of top table in gauge
           D - Drawer
         Legs Type
           LS - Stainless legs
         1-3 digit number with LU indicates the Lip in inch.
         1-3 digit number with LX indicates the blacksplash height in inches. Such as 1LX 
         indicates 1" backsplash height.
         1-3 digit number with M indicates the Casters
           O - Chrome/Stainless Overshelf
     (14) Available with the following options
          Ga14 indicates the thickness of top table in gauge
           D - Drawer
          Legs Type	 
               LG - Galvanized legs
               1-3 digit number with LU indicates the Lip in inch.
               1-3 digit number with LX indicates the blacksplash height in inches. Such as
    1LX indicates 1" backsplash height.
               1-3 digit number with M indicates the Casters
               O - Chrome/Stainless Overshelf		
        (15) Available with the following options	
             Ga14 indicates the thickness of top table in gauge	
               D - Drawer	
             Legs Type
               LS - Stainless legs
               1-3 digit number with LU indicates the Lip in inch.
               1-3 digit number with LX indicates the blacksplash height in inches. Such as
    1LX indicates 1" backsplash height.
               1-3 digit number with M indicates the Casters
               O - Chrome/Stainless Overshelf

[7] (1) Width in inches
    (2) Depth in inches
    (3) Stainless steel type
        1: 200 series
        2: 300 series

[7] (1) Width in inches
    (2) Depth in inches
    (3) Stainless steel type
        1: 200 series
        2: 300 series

[8] Gussets to be welded to shelf and polished.
[9] (1) Width in inches
    (2) Length in inches

‡ This manufacturer is not authorized to use the NSF Mark in association with any
  electrical or gas operated products that are designed to provide safe temperatures
  during the storage, holding, rethermalization, or rapid pull down of food products.

[1] May be followed by suffix: 2, 3, 4, 6 or 8 to indicate the number of cutting boards in
    package.
[2] (1) Length  
    (2) Width  
    (3) Thickness  
    (4) Number of boards in package

[3] Hard Maple cutting board, reversible, thicknesses from 1" to 2-1/4" by 1/4" increments
    John Boos oil finish, available with or without gravy or juice groove.
[4] May be blank or ' - #' to indicates the number of boards in a package.

[3] Hard Maple cutting board, reversible, thicknesses from 1" to 2-1/4" by 1/4" increments
    John Boos oil finish, available with or without gravy or juice groove.
[4] May be blank or ' - #' to indicates the number of boards in a package.
[5] (1) Two digits indicating length		
    (2) Two digits indicating width		
    (3) Up to three digits indicating thickness

[6] Suffix number indicates size of the board.
[7] Hard Maple steam table board, John Boos oil finish.

[4] May be blank or ' - #' to indicates the number of boards in a package.
[6] Suffix number indicates size of the board.
[8] White, thicknesses, 1/2", 3/4", and 1".

[3] Hard Maple cutting board, reversible, thicknesses from 1" to 2-1/4" by 1/4" increments
    John Boos oil finish, available with or without gravy or juice groove.
[4] May be blank or ' - #' to indicates the number of boards in a package.
[5] (1) Two digits indicating length		
    (2) Two digits indicating width		
    (3) Up to three digits indicating thickness
[6] Suffix number indicates size of the board.

[3] Hard Maple cutting board, reversible, thicknesses from 1" to 2-1/4" by 1/4" increments
    John Boos oil finish, available with or without gravy or juice groove.
[4] May be blank or ' - #' to indicates the number of boards in a package.
[6] Suffix number indicates size of the board.

[9] Models supplied with or without readily removable drawer
[10] Number suffix designations indicate size of unit
[11] The following suffixes may apear: R, G, RG, B, RB, GB, RGB, S, MS, O
[12] Available with optional lower shelf

[1] (1) Two digits indicating length (Left to Right).

[1] (1) Two digits indicating length (Left to Right).

[2] (1) Two digit numerical suffix indicating length of unit in inches.

[3] (1) Number indicates length.

[4] (1) Two digit numerical suffix indicating unit length in inches.

[1] (1) Two digits indicating length (Left to Right).

[12] (1) Two Digits indicating width (Front to Back)			
     (2) Two Digits indication length (Left to Right)			
     (3) Up to five alpha numeric characters indicating type of unit:
         CP7 - Cold Plate 7 Circuit
         CP10 - Cold Plate 10 Circuit
     (4) CH indicates Chase

[12] (1) Two Digits indicating width (Front to Back)			
     (2) Two Digits indication length (Left to Right)			
     (3) Up to five alpha numeric characters indicating type of unit:
         CP7 - Cold Plate 7 Circuit
         CP10 - Cold Plate 10 Circuit
     (4) CH indicates Chase

[5] Suffix number(s) indicates size of unit.
[6] (1) May have a PR suffix indicating pot rack option.
        NSF Certified production beginning with date code 07/29/2013.
[7] (1) May be 14 or 16 indicating gauge of stainless steel. Standard model is 18 gauge.
    (2) May have a PR suffix indicating pot rack option.
        NSF Certified production beginning with date code 07/29/2013.

[5] Suffix number(s) indicates size of unit.
[8] Letter suffix L or R indicates side table will mount to dish washer.
[9] (1) 4 - 14 Gauge, 6 - 16 Gauge, 8 - 18 Gauge				
    (2) S - Straight Dish Table, I - Island Dish Table, K = Corner Dish Table, L – Landing
        Dish Table.				
    (3) Table Length, Left to Right.				
    (4) SS - Stainless Steel Legs & Shelf, SB - Stainless Steel Legs & Bracing, GS -
        Galvanized Legs & Shelf, GB – Galvanized Legs & Bracing.				
    (5) W - Welded Set UP, legs welded to bracing or shelf w/ gussets welded to channels,
        K - K.D. legs, bracing or shelf adjustable, lower shelf with leg rings w/ gussets
        welded to channels.				
    (6) L - Left (direction of flow), R - Right (direction of flow).

[10] (1) Up to three alpha numeric characters indicating type of unit - example:
         DR - Drink Rail
     (2) Two Digits indicating length (Left to Right).
     (3) Up to five alpha numeric characters indicating type of unit:
         90-IC - 90 Degree Inside Corner
         90-0C - 90 Degree Outside Corner
         45-IC - 45 Degree Inside Corner
         45-OC - 45 Degree Outside Corner

[5] Suffix number(s) indicates size of unit.
[11] (1) Letter indicates edge detail (B or M)
     (2) Number indicates width of table in inches
     (3) Number indicates length of table in inches
     (4) Letters indicate base type (GB, GS, SB, or SS)
     (5) Letter indicates base construction (K or W)
     (6) Letter indicated casters (C)
     (7) Indicates height of riser

[1] (1) Two digits indicating length (Left to Right).

[12] (1) Two Digits indicating width (Front to Back)			
     (2) Two Digits indication length (Left to Right)			
     (3) Up to five alpha numeric characters indicating type of unit:
         CP7 - Cold Plate 7 Circuit
         CP10 - Cold Plate 10 Circuit
     (4) CH indicates Chase

[1] (1) Two digits indicating length (Left to Right).

[5] Suffix number(s) indicates size of unit.
[13] (1) Number indicates length.
     (2) Letter indicates mounting type (C, T or W).
     (3) Single digit to indicate number of shelves.

[5] Suffix number(s) indicates size of unit.

[14] (1) Two Digits indicating width (Front to Back).
     (2) Two Digits indication length (Left to Right).
     (3) Up to five alpha numeric characters indicating type of unit:
         L -  Left Hinged Door
         R - Right Hinged Door

[15] (1) Three digit character to indicate style of rack, mounting method, and size.

[11] (1) Letter indicates edge detail (B or M)
     (2) Number indicates width of table in inches
     (3) Number indicates length of table in inches
     (4) Letters indicate base type (GB, GS, SB, or SS)
     (5) Letter indicates base construction (K or W)
     (6) Letter indicated casters (C)
     (7) Indicates height of riser

[16] (1) Two Digits indicating length (Left to Right)
     (2) L - indicating Left
         R - indicating Right

[1] (1) Two digits indicating length (Left to Right).

[17] (1) Up to three alpha numeric characters indicating Type of Unit:
         SR1 - Speed Rail Single
         SR2 - Speed Rail Double
     (2) Two Digits indication length (Left to Right). 	

[18] May have hole cut out for a drop in sink.
[19] (1) Length
     (2) Width

[20] Suffix numbers indicate size of sink bowls, number of drainboards, and size of
     drainboards.
[21] NSF Certified production beginning with date code 08/17/2016.
[22] (1) Up to three alpha numeric characters indicating type of unit:
         S1  - 1 Comp Sink
         S2  - 2 Comp Sink
         S3  - 3 Comp Sink
         S4  - 4 Comp Sink
         SC3 - 3 Comp Corner Sink
         DB  - Drainboard
         DBR - Drainboard Recessed
         HS  - Hand Sink
         SS  - Side Splash
     (2) Two Digits indicating width (Front to Back).	
     (3) Two Digits indication length (Left to Right).	
     (4) Up to five alpha numeric characters indicating type of unit:
         2Dxx  - Drainboard Length
         90-IC - 90 Degree Inside Corner
         90-0C - 90 Degree Outside Corner
         45-IC - 45 Degree Inside Corner
         45-0C - 45 Degree Outside Corner

[5] Suffix number(s) indicates size of unit.
[23] The following suffixes may appear: R, G, RG, B, RB, GB, RGB, S, MS, O.
[24] Available with optional lower shelf.
[25] Suffix number indicates size of unit.
[26] The following suffixes may appear: R, G, RG, B, RB, GB, RGB, S, MS, O.
[27] Available with optional lower shelf.

[1] (1) Two digits indicating length (Left to Right).

[12] (1) Two Digits indicating width (Front to Back)			
     (2) Two Digits indication length (Left to Right)			
     (3) Up to five alpha numeric characters indicating type of unit:
         CP7 - Cold Plate 7 Circuit
         CP10 - Cold Plate 10 Circuit
     (4) CH indicates Chase

[14] (1) Two Digits indicating width (Front to Back).
     (2) Two Digits indication length (Left to Right).
     (3) Up to five alpha numeric characters indicating type of unit:
         L -  Left Hinged Door
         R - Right Hinged Door

[28] This sink is Certified for use in mobile food carts and kiosks only.

‡ This manufacturer is not authorized to use the NSF Mark in association with any
  electrical or gas operated products that are designed to provide safe temperatures
  during the storage, holding, rethermalization, or rapid pull down of food products.

[1] (1) Two numerical digits indicating table width in inches.
    (2) Two numerical digits indicating table length in inches.
    (3) Suffix contains up to three characters indicating available options.
        Example: SSW = Standard unit with Full undershelf
                 FMS = Full length table with Mid-shelf
                 HMS = Half length table with Mid-shelf
                 FTR = Full length table with Tray rack
                 HTR = Half length table with Tray rack

[2] (1) Two digits indicating width of unit (front to back)
    (2) Two digits indicating length of unit (left to right)
    (3) Two digits indicating height of unit
    (4) - L - Mop sink left
        - R - Mop sink right

[3] Suffix number indicates size of unit.
[4] (1) May have a PR suffix indicating pot rack option.
        NSF Certified production beginning with date code 07/29/2013.
[5] (1) May be 14 or 16 indicating gauge of stainless steel. Standard model is 18 gauge.
    (2) May have a PR suffix indicating pot rack option.
        NSF Certified production beginning with date code 07/29/2013.

[6] (1) Two Digits indicating width (Front to Back)
    (2) Two Digits indication length (Left to Right)
    (3) Up to five alpha numeric characters indicating type of unit:
        CP7  - Cold Plate 7 Circuit
        CP10 - Cold Plate 10 Circuit
    (4) CH indicates Chase

[6] (1) Two Digits indicating width (Front to Back)
    (2) Two Digits indication length (Left to Right)
    (3) Up to five alpha numeric characters indicating type of unit:
        CP7  - Cold Plate 7 Circuit
        CP10 - Cold Plate 10 Circuit
    (4) CH indicates Chase

[3] Suffix number indicates size of unit.

[7] NSF Certified production beginning with date code 09/17/2013.

[8] (1) Two digits indicating length (Left to Right). 
    

[8] (1) Two digits indicating length (Left to Right). 
    

[9] (1) Single digit alphabetical suffix indicating door option:
        O - Open front
        H - Hinged doors
        S - Sliding doors
    (2) Single digit alphabetical suffix indicating top material:
        S - Stainless
        P - Poly (HDPE)
    (3) Numerical suffix up to two digits indicating thickness of top material:
        Gauge:
        6 - 16ga
        4 - 14ga
        Poly Thickness(x*1/4):
        3 - 3/4”
        2 - 1/2”
    (4) Numerical suffix up to two digits indicating riser height:
        5  - 5” riser
        4  - 4” riser
        43 - 4” riser on all 3 sides
    (5) Two digit numerical suffix indicating cabinet width in inches.
    (6) Two digit numerical suffix indicating cabinet length in inches.

[10] Suffix numbers indicate size of unit.
[11] Letter suffix L or R indicates side table will mount to dish washer.
[12] (1) 4 - 14 Gauge, 6 - 16 Gauge, 8 - 18 Gauge
     (2) S - Straight Dish Table, I - Island Dish Table, K = Corner Dish Table, L – Landing
         Dish Table.
     (3) Table Length, Left to Right.
     (4) SS - Stainless Steel Legs & Shelf, SB - Stainless Steel Legs & Bracing, GS - 
         Galvanized Legs & Shelf, GB – Galvanized Legs & Bracing.
     (5) W - Welded Set UP, legs welded to bracing or shelf w/ gussets welded to channels,
         K - K.D. legs, bracing or shelf adjustable, lower shelf with leg rings w/ gussets
         welded to channels.
     (6) L - Left (direction of flow), R - Right (direction of flow).

[13] (1) Number indicates width of cabinet in inches
     (2) Number indicates length of cabinet in inches
     (3) Letter(s) indicates casters (-C), drawer locks (-L), or casters and drawer locks
     (-CL)
     (4) ‘W’ means drawer is made for a wood top table and ‘S’ means it is made for a
     stainless steel top table.

[14] (1)  Up to three alpha numeric characters indicating Type of Unit- example:
          DR - Drink Rail
     (2)  Two Digits indicating length (Left to Right).
     (3)  Up to five alpha numeric characters indicating type of unit:
          90-IC - 90 Degree Inside Corner
          90-0C - 90 Degree Outside Corner
          45-IC - 45 Degree Inside Corner
          45-OC - 45 Degree Outside Corner

[15] (1) Two digit numerical suffix indicating unit length in inches.
[16] (1) Two digit numerical suffix indicating unit width in inches.
     (2) Numerical suffix of "7" or "10" indicating circuit number for cold plate.

[8] (1) Two digits indicating length (Left to Right). 
    

[9] (1) Single digit alphabetical suffix indicating door option:
        O - Open front
        H - Hinged doors
        S - Sliding doors
    (2) Single digit alphabetical suffix indicating top material:
        S - Stainless
        P - Poly (HDPE)
    (3) Numerical suffix up to two digits indicating thickness of top material:
        Gauge:
        6 - 16ga
        4 - 14ga
        Poly Thickness(x*1/4):
        3 - 3/4”
        2 - 1/2”
    (4) Numerical suffix up to two digits indicating riser height:
        5  - 5” riser
        4  - 4” riser
        43 - 4” riser on all 3 sides
    (5) Two digit numerical suffix indicating cabinet width in inches.
    (6) Two digit numerical suffix indicating cabinet length in inches.
[17] Suffix number and/or letters indicates size of unit.

[3] Suffix number indicates size of unit.
[18] (1) Letter indicates edge detail (B or M)
     (2) Number indicates width of table in inches
     (3) Number indicates length of table in inches
     (4) Letters indicate base type (GB, GS, SB, or SS)
     (5) Letter indicates base construction (K or W)
     (6) Letter indicated casters (C)
     (7) Indicates height of riser

[8] (1) Two digits indicating length (Left to Right). 
    

[6] (1) Two Digits indicating width (Front to Back)
    (2) Two Digits indication length (Left to Right)
    (3) Up to five alpha numeric characters indicating type of unit:
        CP7  - Cold Plate 7 Circuit
        CP10 - Cold Plate 10 Circuit
    (4) CH indicates Chase

[8] (1) Two digits indicating length (Left to Right). 
    

[3] Suffix number indicates size of unit.
[19] (1) Number indicates length.
     (2) Letter indicates mounting type (C, T, or W).
     (3) Single digit to indicate number of shelves.

[3] Suffix number indicates size of unit.
[20] Units have segmented readily removable tops which may or may not exceed 36" x 36" and 50
     lbs. max. and are made of the following materials: Listed under NSF/ANSI 169: Wood,
     Synthetic.

[21] (1)	4 - 430 Stainless Steel Wrap
         Omit if 300 series
     (2) M - Maple Top
         P - Poly Top
         Omit if Stainless Top
     (3) Poly 
         2 - ½”
         3 - ¾”
         4 - 1”
         Maple
         6 - 1-1/2” Thick Maple Top
         7 - 1-3/4” Thick Maple Top
         9 - 2-1/4” Thick Maple Top
         Stainless Steel
         4 - 14 Gauge
         6 - 16 Gauge
         8 - 18 Gauge
     (4) R - Riser,  Omit if flat top
     (5) Riser Height
         1.5 - 1.5” High Raw Riser
         4   - 4” High x 1” Deep w/ turndown
         5   - 5” High x 1-1/2” Deep w/ turndown
         6   - 6” High x 2” Deep w/ turndown
         10  - 10” High x 2” Deep w/ turndown
         Omit if no riser
     (6) Non Drip – Marine Edge
         Omit if no marine edge
     (7) Table Width, Front to Back (in inches)
     (8) Table Length, Left to Right (in inches)
     (9) 1S  - # of intermediates shelves
         1AS - # of Adj. intermediate shelves
         Omit of no shelves
     (10)L - Left (location of sink bowl)
         R - Right (location of sink bowl)
         Omit if no sink bowl

[3] Suffix number indicates size of unit.
[22] (1) One letter numerical suffix indicating shelf style:
         E - Economy
         H - Heavy Duty
         C - Cantilevered
     (2) One digit numerical suffix indicating number of shelves with a value of 1, 2 or 3.
     (3) One digit numerical suffix indicating gauge of steel:
         4 - 14 ga
         6 - 16 ga
         8 - 18 ga
     (4) One letter numerical suffix indicating riser option:
         F - Flat
         R - Riser
     (5) One letter numerical suffix indicating knockdown or welded option:
         K – Knockdown
         W – Welded
     (6) Two digit numerical suffix indicating overshelf width in inches.
     (7) Two digit numerical suffix indicating overshelf length in inches.
     

[23] (1) One-digit numerical suffix indicating number of shelves			
     (2) One-digit numerical suffix indicating gauge of stainless steel:
         6 - 16 ga.
         4 - 14 ga.
     (3) One letter numerical suffix indicating knock or welded option
         K - Knockdown
         W - Welded
     (4) Two digits indicating width (Front to Back)		
     (5) Two- or three-digits indicating length (Left to Right)

[24] (1) Two Digits indicating width (Front to Back).
     (2) Two Digits indication length (Left to Right).
     (3) Up to five alpha numeric characters indicating type of unit:
         L -  Left Hinged Door
         R - Right Hinged Door

[25] (1) Three digit character to indicate style of rack, mounting method, and size.

[18] (1) Letter indicates edge detail (B or M)
     (2) Number indicates width of table in inches
     (3) Number indicates length of table in inches
     (4) Letters indicate base type (GB, GS, SB, or SS)
     (5) Letter indicates base construction (K or W)
     (6) Letter indicated casters (C)
     (7) Indicates height of riser

[3] Suffix number indicates size of unit.

[26] (1) The following suffix may appear: SSLR, SSL, SSR
[27] (1) FV1 denotes single pedal foot valve, FV2 denotes double pedal foot valve
     (2) SSLR  denotes side splash left and right
         SSL denotes side splash left
         SSR denotes side splash right

[28] (1)  Two Digits indicating length (Left to Right).
     (2)  L - indicating Left
          R- indicating Right

[29] (1) Two digit numerical suffix indicating cabinet width in inches.
     (2) Two digit numerical suffix indicating cabinet depth in inches.

[8] (1) Two digits indicating length (Left to Right). 
    

[30] (1) Up to three alpha numeric characters indicating Type of Unit:
         SR1 - Speed Rail Single
         SR2 - Speed Rail Double
     (2) Two Digits indicating length (Left to Right).
     	

[31] May have hole cut out for a drop in sink.
[32] (1) Length
     (2) Width

[33] Suffix numbers indicate size of sink bowls, number of drainboards, and size of
     drainboards.
[34] NSF Certified production beginning with date code 08/17/2016.
[35] (1) Up to three alpha numeric characters indicating type of unit:
         S1  - 1 Comp Sink
         S2  - 2 Comp Sink
         S3  - 3 Comp Sink
         S4  - 4 Comp Sink
         SC3 - 3 Comp Corner Sink
         DB  - Drainboard
         DBR - Drainboard Recessed
         HS  - Hand Sink
         SS  - Side Splash
     (2) Two Digits indicating width (Front to Back).
     (3) Two Digits indication length (Left to Right).
     (4) Up to five alpha numeric characters indicating type of unit:
         2Dxx  - Drainboard Length
         90-IC - 90 Degree Inside Corner
         90-0C - 90 Degree Outside Corner
         45-IC - 45 Degree Inside Corner
         45-0C - 45 Degree Outside Corner
     	

[3] Suffix number indicates size of unit.
[18] (1) Letter indicates edge detail (B or M)
     (2) Number indicates width of table in inches
     (3) Number indicates length of table in inches
     (4) Letters indicate base type (GB, GS, SB, or SS)
     (5) Letter indicates base construction (K or W)
     (6) Letter indicated casters (C)
     (7) Indicates height of riser
[36] The following suffixes may appear: R, G, RG, B, RB, GB, RGB, S, MS, O, SKK.
[37] Available with optional lower shelf.
[38] Models also available in L-shape.

[8] (1) Two digits indicating length (Left to Right). 
    

[6] (1) Two Digits indicating width (Front to Back)
    (2) Two Digits indication length (Left to Right)
    (3) Up to five alpha numeric characters indicating type of unit:
        CP7  - Cold Plate 7 Circuit
        CP10 - Cold Plate 10 Circuit
    (4) CH indicates Chase

[18] (1) Letter indicates edge detail (B or M)
     (2) Number indicates width of table in inches
     (3) Number indicates length of table in inches
     (4) Letters indicate base type (GB, GS, SB, or SS)
     (5) Letter indicates base construction (K or W)
     (6) Letter indicated casters (C)
     (7) Indicates height of riser

[24] (1) Two Digits indicating width (Front to Back).
     (2) Two Digits indication length (Left to Right).
     (3) Up to five alpha numeric characters indicating type of unit:
         L -  Left Hinged Door
         R - Right Hinged Door

[17] Suffix number and/or letters indicates size of unit.
[39] (1) Single digit alphabetical suffix indicating door option:
         O - Open front
         H - Hinged doors
         S - Sliding doors
     (2) Numerical suffix up to two digits indicating thickness of top material:
         Wood Thickness(x*1/4):
         6 - 1.5”
         7 - 1.75”
         9 - 2.25”
         12 - 3”
     (3) Numerical suffix up to two digits indicating riser height:
         5  - 5” riser
         4  - 4” riser
         43 - 4” riser on all 3 sides
     (4) Two digit numerical suffix indicating cabinet width in inches.
     (5) Two digit numerical suffix indicating cabinet length in inches. 
     

[40] (1) Numbers indicate width and depth of tabletop this shelf is designed to fit.

[41] (1) Numbers indicate width of table to be used with product.

[45] (1) Indicates width front to back		
     (2) Indicates length left to right

[42] (1)  - Suffix of P or R
     (2)  - 4 digit suffix indicating drawer size
     (3)  - Suffix of SC or SCL
     (4)  - Suffix of W or S
     (5)  - 2 digit suffix indicating depth

[43] Available in Stainless Steel or Galvanized 
     (1) Height in inches up to 4 numerical digits
     (2) B  - Bullet Foot
         C  - Caster
         F  - Flange
         FH - Flange w/ Holes
     (3) ADJ - Adjustable > 1.5" (Omit if standard foot/caster)

[44] (1) Numbers indicate depth of table to be used with product.

[3] Suffix number indicates size of unit.

‡ This manufacturer is not authorized to use the NSF Mark in association with any
  electrical or gas operated products that are designed to provide safe temperatures
  during the storage, holding, rethermalization, or rapid pull down of food products.

[1] (1) Two numerical digits indicating table width in inches.
    (2) Two numerical digits indicating table length in inches.
    (3) Suffix contains up to three characters indicating available options.
        Example: SSW = Standard unit with Full undershelf
                 FMS = Full length table with Mid-shelf
                 HMS = Half length table with Mid-shelf
                 FTR = Full length table with Tray rack
                 HTR = Half length table with Tray rack

[2] (1) Two digits indicating width of unit (front to back)	
    (2) Two digits indicating length of unit (left to right)	
    (3) Two digits indicating height of unit	
    (4) - L - Mop sink left
        - R - Mop sink right

[3] Suffix number indicates size of unit.
[4] (1) May have a PR suffix indicating pot rack option.
        NSF Certified production beginning with date code 07/29/2013.
[5] (1) May be 14 or 16 indicating gauge of stainless steel. Standard model is 18 gauge.
    (2) May have a PR suffix indicating pot rack option.
        NSF Certified production beginning with date code 07/29/2013.

[2] (1) Two digits indicating width of unit (front to back)	
    (2) Two digits indicating length of unit (left to right)	
    (3) Two digits indicating height of unit	
    (4) - L - Mop sink left
        - R - Mop sink right

[2] (1) Two digits indicating width of unit (front to back)	
    (2) Two digits indicating length of unit (left to right)	
    (3) Two digits indicating height of unit	
    (4) - L - Mop sink left
        - R - Mop sink right

[3] Suffix number indicates size of unit.

[6] NSF Certified production beginning with date code 09/17/2013.

[7] (1) Two digits indicating length (Left to right).
    

[7] (1) Two digits indicating length (Left to right).
    

[8] (1) Single digit alphabetical suffix indicating door option:
        O - Open front
        H - Hinged doors
        S - Sliding doors
    (2) Numerical suffix up to two digits indicating thickness of top material:
        Wood Thickness(x*1/4):
        6  - 1.5”
        7  - 1.75”
        9  - 2.25”
        12 - 3”
    (3) Numerical suffix up to two digits indicating riser height:
        5  - 5” riser
        4  - 4” riser
        43 - 4” riser on all 3 sides
    (4) Two digit numerical suffix indicating cabinet width in inches.
    (5) Two digit numerical suffix indicating cabinet length in inches.

[9] Suffix numbers indicate size of unit.
[10] Letter suffix L or R indicates side table will mount to dish washer.
[11] (1) 4 - 14 Gauge, 6 - 16 Gauge, 8 - 18 Gauge
     (2) S - Straight Dish Table, I - Island Dish Table, K = Corner Dish Table, L – Landing
         Dish Table.
     (3) Table Length, Left to Right.
     (4) SS - Stainless Steel Legs & Shelf, SB - Stainless Steel Legs & Bracing, GS - 
         Galvanized Legs & Shelf, GB – Galvanized Legs & Bracing.
     (5) W - Welded Set UP, legs welded to bracing or shelf w/ gussets welded to channels,
         K - K.D. legs, bracing or shelf adjustable, lower shelf with leg rings w/ gussets
         welded to channels.
     (6) L - Left (direction of flow), R - Right (direction of flow).

[12] (1) Number indicates width of cabinet in inches
     (2) Number indicates length of cabinet in inches
     (3) Letter(s) indicates casters (-C), drawer locks (-L), or casters and drawer locks
     (-CL)
     (4) ‘W’ means drawer is made for a wood top table and ‘S’ means it is made for a
     stainless steel top table.

[13] (1)  Up to three alpha numeric characters indicating Type of Unit:
          Example:  DR - Drink Rail
     (2)  Two digits indicating length (Left to right).
     (3)  Up to five alpha numeric characters indicating type of unit:
          90-IC - 90 Degree Inside Corner
          90-0C - 90 Degree Outside Corner
          45-IC - 45 Degree Inside Corner
          45-OC - 45 Degree Outside Corner
     
     
     

[14] (1) Two digit numerical suffix indicating unit length in inches.
[15] (1) Two digit numerical suffix indicating unit width in inches.
     (2) Numerical suffix of "7" or "10" indicating circuit number for cold plate.

[7] (1) Two digits indicating length (Left to right).
    

[8] (1) Single digit alphabetical suffix indicating door option:
        O - Open front
        H - Hinged doors
        S - Sliding doors
    (2) Numerical suffix up to two digits indicating thickness of top material:
        Wood Thickness(x*1/4):
        6  - 1.5”
        7  - 1.75”
        9  - 2.25”
        12 - 3”
    (3) Numerical suffix up to two digits indicating riser height:
        5  - 5” riser
        4  - 4” riser
        43 - 4” riser on all 3 sides
    (4) Two digit numerical suffix indicating cabinet width in inches.
    (5) Two digit numerical suffix indicating cabinet length in inches.
[16] Suffix number and/or letters indicates size of unit.

[3] Suffix number indicates size of unit.
[17] (1) Letter indicates edge detail (B or M)
     (2) Number indicates width of table in inches
     (3) Number indicates length of table in inches
     (4) Letters indicate base type (GB, GS, SB, or SS)
     (5) Letter indicates base construction (K or W)
     (6) Letter indicated casters (C)
     (7) Indicates height of riser

[7] (1) Two digits indicating length (Left to right).
    

[18] (1) Two digits indicating width (Front to back).
     (2) Two digits indicating length (left to right).
     (3) Up to five alpha numeric characters indicating type of unit:
         CP7  - Cold Plate 7 Circuit
         CP10 - Cold Plate 10 Circuit
     (4) CH indicates Chase

[7] (1) Two digits indicating length (Left to right).
    

[3] Suffix number indicates size of unit.
[19] (1) Number indicates length.
     (2) Letter indicates mounting type (C, T, or W).
     (3) Single digit to indicate number of shelves.

[3] Suffix number indicates size of unit.
[20] Units have segmented readily removable tops which may or may not exceed 36" x 36" and 50
     lbs. max. and are made of the following materials: Listed under NSF/ANSI 169: Wood,
     Synthetic.

[21] (1)	4 - 430 Stainless Steel Wrap
         Omit if 300 series
     (2) M - Maple Top
         P - Poly Top
         Omit if Stainless Top
     (3) Poly 
         2 - ½”
         3 - ¾”
         4 - 1”
         Maple
         6 - 1-1/2” Thick Maple Top
         7 - 1-3/4” Thick Maple Top
         9 - 2-1/4” Thick Maple Top
         Stainless Steel
         4 - 14 Gauge
         6 - 16 Gauge
         8 - 18 Gauge
     (4) R - Riser,  Omit if flat top
     (5) Riser Height
         1.5 - 1.5” High Raw Riser
         4   - 4” High x 1” Deep w/ turndown
         5   - 5” High x 1-1/2” Deep w/ turndown
         6   - 6” High x 2” Deep w/ turndown
         10  - 10” High x 2” Deep w/ turndown
         Omit if no riser
     (6) Non Drip – Marine Edge
         Omit if no marine edge
     (7) Table Width, Front to Back (in inches)
     (8) Table Length, Left to Right (in inches)
     (9) 1S  - # of intermediates shelves
         1AS - # of Adj. intermediate shelves
         Omit of no shelves
     (10)L - Left (location of sink bowl)
         R - Right (location of sink bowl)
         Omit if no sink bowl

[3] Suffix number indicates size of unit.
[22] (1) One letter numerical suffix indicating shelf style:
         E - Economy
         H - Heavy Duty
         C - Cantilevered
     (2) One digit numerical suffix indicating number of shelves with a value of 1, 2 or 3.
     (3) One digit numerical suffix indicating gauge of steel:
         4 - 14 ga
         6 - 16 ga
         8 - 18 ga
     (4) One letter numerical suffix indicating riser option:
         F - Flat
         R - Riser
     (5) One letter numerical suffix indicating knockdown or welded option:
         K – Knockdown
         W – Welded
     (6) Two digit numerical suffix indicating overshelf width in inches.
     (7) Two digit numerical suffix indicating overshelf length in inches.

[23] (1) One-digit numerical suffix indicating number of shelves
     (2) One-digit numerical suffix indicating gauge of stainless steel:
         6 - 16 ga.
         4 - 14 ga.
     (3) One letter numerical suffix indicating knock or welded option
         K - Knockdown
         W - Welded
     (4) Two digits indicating width (Front to Back)
     (5) Two- or three-digits indicating length (Left to Right)

[24] (1) Two digits indicating width (Front to back)
     (2) Two digits indication length (Left to right)
     (3) Up to five alpha numeric characters indicating type of unit:
         L -  Left Hinged Door
         R -  Right Hinged Door

[25] (1) Three digit character to indicate style of rack, mounting method, and size.

[17] (1) Letter indicates edge detail (B or M)
     (2) Number indicates width of table in inches
     (3) Number indicates length of table in inches
     (4) Letters indicate base type (GB, GS, SB, or SS)
     (5) Letter indicates base construction (K or W)
     (6) Letter indicated casters (C)
     (7) Indicates height of riser

[3] Suffix number indicates size of unit.

[26] (1) The following suffix may appear: SSLR, SSL, SSR.
[27] (1) FV1 denotes single pedal foot valve, FV2 denotes double pedal foot valve
     (2) SSLR  denotes side splash left and right
         SSL denotes side splash left
         SSR denotes side splash right
     

[28] (1)  Two digits indicating length (Left to Right).
     (2)  L - indicating Left
          R - indicating Right

[7] (1) Two digits indicating length (Left to right).
    
[29] (1) Two digit numerical suffix indicating cabinet width in inches.
     (2) Two digit numerical suffix indicating cabinet depth in inches.

[30] (1) Up to three alpha numeric characters indicating type of unit:	
         SR1 - Speed Rail Single	
         SR2 - Speed Rail Double	
     (2) Two Digits indication length (Left to right).	
      	

[31] May have hole cut out for a drop in sink.
[32] (1) Length
     (2) Width

[33] Suffix numbers indicate size of sink bowls, number of drainboards, and size of
     drainboards.
[34] NSF Certified production beginning with date code 08/17/2016.
[35] (1) Up to three alpha numeric characters indicating Type of Unit:
         S1  - 1 Comp Sink
         S2  - 2 Comp Sink
         S3  - 3 Comp Sink
         S4  - 4 Comp Sink
         SC3 - 3 Comp Corner Sink
         DB  - Drainboard
         DBR - Drainboard Recessed
         HS  - Hand Sink
         SS  - Side Splash
     (2) Two Digits indicating width (Front to Back).
     (3) Two Digits indication length (Left to Right).
     (4) Up to five alpha numeric characters indicating type of unit:
         2Dxx  - Drainboard Length
         90-IC - 90 Degree Inside Corner
         90-OC - 90 Degree Outside Corner
         45-IC - 45 Degree Inside Corner
         45-OC - 45 Degree Outside Corner
     

[3] Suffix number indicates size of unit.
[17] (1) Letter indicates edge detail (B or M)
     (2) Number indicates width of table in inches
     (3) Number indicates length of table in inches
     (4) Letters indicate base type (GB, GS, SB, or SS)
     (5) Letter indicates base construction (K or W)
     (6) Letter indicated casters (C)
     (7) Indicates height of riser
[36] The following suffixes may appear: R, G, RG, B, RB, GB, RGB, S, MS, O, SKK.
[37] Available with optional lower shelf.
[38] Models also available in L-shape.

[7] (1) Two digits indicating length (Left to right).
    

[18] (1) Two digits indicating width (Front to back).
     (2) Two digits indicating length (left to right).
     (3) Up to five alpha numeric characters indicating type of unit:
         CP7  - Cold Plate 7 Circuit
         CP10 - Cold Plate 10 Circuit
     (4) CH indicates Chase

[2] (1) Two digits indicating width of unit (front to back)	
    (2) Two digits indicating length of unit (left to right)	
    (3) Two digits indicating height of unit	
    (4) - L - Mop sink left
        - R - Mop sink right

[24] (1) Two digits indicating width (Front to back)
     (2) Two digits indication length (Left to right)
     (3) Up to five alpha numeric characters indicating type of unit:
         L -  Left Hinged Door
         R -  Right Hinged Door

[16] Suffix number and/or letters indicates size of unit.
[39] (1) Single digit alphabetical suffix indicating door option:
         O - Open front
         H - Hinged doors
         S - Sliding doors
     (2) Single digit alphabetical suffix indicating top material:
         S - Stainless
         P - Poly (HDPE)
     (3) Numerical suffix up to two digits indicating thickness of top material:
         Gauge:
         6 - 16ga
         4 - 14ga
         Poly Thickness(x*1/4):
         3 - 3/4”
         2 - 1/2”
     (4) Numerical suffix up to two digits indicating riser height:
         5  - 5” riser
         4  - 4” riser
         43 - 4” riser on all 3 sides
     (5) Two digit numerical suffix indicating cabinet width in inches.
     (6) Two digit numerical suffix indicating cabinet length in inches.

[40] (1) Numbers indicate width and depth of tabletop this shelf is designed to fit.

[41] (1) Numbers indicate width of table to be used with product.

[45] (1) Indicates width front to back		
     (2) Indicates length left to right

[42] (1)  - Suffix of P or R
     (2)  - 4 digit suffix indicating drawer size
     (3)  - Suffix of SC or SCL
     (4)  - Suffix of W or S
     (5)  - 2 digit suffix indicating depth