NSF Product and Service Listings

[1] Certified for contact with water only.

[1] Certified for contact with water only.

[1] May or may not be followed by suffix '/Q', indicating IMQ approval
[2] Serial number is indicated on the dataplate with the following format:
    YYYYMMN with N = 7-digit consecutive number
    Units are NSF Certified from 2003060194000
[3] All model numbers may or may not be followed by the suffix USA.
[4] All models may or may not be followed by the suffix HC.

[1] May or may not be followed by suffix '/Q', indicating IMQ approval
[2] Serial number is indicated on the dataplate with the following format:
    YYYYMMN with N = 7-digit consecutive number
    Units are NSF Certified from 2003060194000
[3] All model numbers may or may not be followed by the suffix USA.

[1] CM Series Ice Crushers, with the exception of CM-52, can have one of the
    following suffixes: M, E, C

[1] Suffix:
    (1) Cube Size:
        CH - Half cube
        G  - Jumbo cube
        M  - Full cube
    (2) Cabinet Finish:
        AI    - Stainless steel
        Blank - Painted    
    (3) Condenser Type:
        A - Air cooled
        L - Low side
        R - Remote
[3] Model number may be followed by additional suffix letters and/or numbers. This will
    differentiate between elcetrical control systems (electro-mechanical vs. computer
    controlled).  This also allows for engineering design level digit.

[1] Suffix:
    (1) Cube Size:
        CH - Half cube
        G  - Jumbo cube
        M  - Full cube
    (2) Cabinet Finish:
        AI    - Stainless steel
        Blank - Painted    
    (3) Condenser Type:
        A - Air cooled
        L - Low side
        R - Remote
[2] Models with or without (2).
[3] Model number may be followed by additional suffix letters and/or numbers. This will
    differentiate between elcetrical control systems (electro-mechanical vs. computer
    controlled).  This also allows for engineering design level digit.

[1] Suffix:
    (1) Cube Size:
        CH - Half cube
        G  - Jumbo cube
        M  - Full cube
    (2) Cabinet Finish:
        AI    - Stainless steel
        Blank - Painted    
    (3) Condenser Type:
        A - Air cooled
        L - Low side
        R - Remote

[1] Model number may be followed by additional suffix letters and/or numbers. This will
    differentiate between electrical control systems (electro-mechanical vs. computer
    controlled).  This also allows for engineering design level digit.
[2] Certified models have serial number ending in suffix 'z' for the EF series or a serial
    number with the following format: YYMM1280XXXXXX, YYMM = last two digits of year of
    manufacture and Month (01-12), XXXXXX = sequential number.
[3] (1) Unit electrical characteristics 0, 1, 2, 3, 4, ...
    (2) Cube size:
        F - Full cube
        G - Grande cube
        H  - Half cube
        J  - Jumbo cube
    (3) Cabinet size (width): 22, 30, 48
    (4) Cabinet finish
        P  - Painted or plastic
        S  - Aluminum, stainless steel, or stainless finish
    (5) Condenser type:
        A  - Air cooled
        L  - Low side
        R  - Remote
        W  - Water cooled
    (6) Dispense mechanism:
        01 - Push button
        03 - Key
        04 - Ving card
    (7) Evaporator Finish
        EN - Electroless Nickel
        TN - Teflon Nickel
    (8) Design level 1, 2, 3, ...
    (9) Design level A, B, C, ...

[1] Model number may be followed by additional suffix letters and/or numbers. This will
    differentiate between electrical control systems (electro-mechanical vs. computer
    controlled).  This also allows for engineering design level digit.
[4] (1) Condenser type:
        A - Air cooled
        R - Remote
        W - Water cooled
    (2) Cube size:
        F - Full cube
        H - Half cube
    (3) Unit electrical characteristics: 1, 2, 3, 5

[1] Model number may be followed by additional suffix letters and/or numbers. This will
    differentiate between electrical control systems (electro-mechanical vs. computer
    controlled).  This also allows for engineering design level digit.
[4] (1) Condenser type:
        A - Air cooled
        R - Remote
        W - Water cooled
    (2) Cube size:
        F - Full cube
        H - Half cube
    (3) Unit electrical characteristics: 1, 2, 3, 5

[1] May include suffix:
    75     - Includes SmartCart 75 ice cart
    125    - Includes SmartCart 125 ice cart
    BG     - Includes automatic bagger
    ICS125 - Includes Cambro ICS125L ice cart
    LP     - Low profile bin, includes Totes ice carrier

[Pb] Product also evaluated and determined to possess weighted average lead content of
     <=0.25% and complies with lead content requirements for “lead free” plumbing as defined
     by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking
     Water Act.

[Pb] Product also evaluated and determined to possess weighted average lead content of
     <=0.25% and complies with lead content requirements for “lead free” plumbing as defined
     by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking
     Water Act.

[Pb] Product also evaluated and determined to possess weighted average lead content of
     <=0.25% and complies with lead content requirements for “lead free” plumbing as defined
     by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking
     Water Act.

[Pb] Product also evaluated and determined to possess weighted average lead content of
     <=0.25% and complies with lead content requirements for “lead free” plumbing as defined
     by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking
     Water Act.

[Pb] Product also evaluated and determined to possess weighted average lead content of
     <=0.25% and complies with lead content requirements for “lead free” plumbing as defined
     by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking
     Water Act.

[Pb] Product also evaluated and determined to possess weighted average lead content of
     <=0.25% and complies with lead content requirements for “lead free” plumbing as defined
     by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking
     Water Act.

[4] (A) Ice type
        C - Chewblet
        M - Micro chewblet
        F - Flake
    (B) Voltage
        C - 208-230/60Hz/1ph
        D - 115/60Hz/1ph self contained or 115/60Hz/1ph low side w/ 1ph remote condensing
    unit
        E - 230/50Hz/1ph
        F - 115/60Hz/1ph low side w/ 3ph remote condensing unit
    (C) Condenser
        A - Air cooled self contained
        N - Low side only, no condensing unit
        R - Air cooled remote condensing unit
        W - Water cooled self contained
    (D) Application
        B - Bin
        H - Harmony
        J - Drop-in
        M - Ice manager system
        V - Vision
        P - Profile
    (E) Configuration
        M - Marine RIDE
        S - RIDE
        T - Top Mount
[Pb] Product also evaluated and determined to possess weighted average lead content of
     <=0.25% and complies with lead content requirements for “lead free” plumbing as defined
     by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking
     Water Act.

[1] Product acceptable for customer self service.
    (A) Ice type
        C - Chewblet
        F – Flake
    (B) Voltage
        C – 220/60/1
        D – 115/60/1
        E – 230/50/1
    (C) Condenser
        A – Air-cooled, self contained
        N – Air-cooled, no condensing unit
        R – Air-cooled remote condensing unit
        W – Water-cooled, self contained
    (D) Application
        B – Bin
        H – Harmony
        J – Drop-in
        M – Ice Manager System
        V – Vision
    (E) Configuration
        M – Marine satellite fill
        S – Satellite fill
        T – Top mount
[Pb] Product also evaluated and determined to possess weighted average lead content of
     <=0.25% and complies with lead content requirements for “lead free” plumbing as defined
     by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking
     Water Act.

[Pb] Product also evaluated and determined to possess weighted average lead content of
     <=0.25% and complies with lead content requirements for “lead free” plumbing as defined
     by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking
     Water Act.

[1] Evaluated and accepted under the vessel sanitation guidelines.

[1] (1) Letter indicating shape of ice (N - nugget, F - flake)
    (2) indication of production rate: 700, 900 or 1200
    (3) Letter indicating condensing (A - air, W - water)

[Pb] Product also evaluated and determined to possess weighted average lead content of
     <=0.25% and complies with lead content requirements for “lead free” plumbing as defined
     by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking
     Water Act.

[Pb] Product also evaluated and determined to possess weighted average lead content of
     <=0.25% and complies with lead content requirements for “lead free” plumbing as defined
     by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking
     Water Act.

[4] (1) Optional letters DP indicating drain pump.

[4] (1) Optional letters DP indicating drain pump.

[4] (1) Optional letters DP indicating drain pump.

[2] (1) Digit indicating Ice Harvest: 400, 440, 500, 700, 880 or 1000
    (2) Letter indicating Cooling System: 
        A - Air
        W - Water
    (3) Digit indicating Voltage where: 
        1 - 115V/60Hz/1ph
        2 - 230V/60Hz/1ph
        3 - 230V/60Hz/3ph
    (4) Letter indicating Ice cube shape where: 
        H - Half Dice
        F - Full Dice
[Pb] Product also evaluated and determined to possess weighted average lead content of
     <=0.25% and complies with lead content requirements for “lead free” plumbing as defined
     by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking
     Water Act.

[Pb] Product also evaluated and determined to possess weighted average lead content of
     <=0.25% and complies with lead content requirements for “lead free” plumbing as defined
     by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking
     Water Act.

[Pb] Product also evaluated and determined to possess weighted average lead content of
     <=0.25% and complies with lead content requirements for “lead free” plumbing as defined
     by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking
     Water Act.

[3] (1) Digit indicating Ice Harvest: 400, 440, 500, 700, 880 or 1000
    (2) Digit indicating Voltage where: 
        1 - 115V/60Hz/1ph
        2 - 230V/60Hz/1ph
        3 - 230V/60Hz/3ph
    (3) Letter indicating Ice cube shape where: 
        H - Half Dice
        F - Full Dice
[Pb] Product also evaluated and determined to possess weighted average lead content of
     <=0.25% and complies with lead content requirements for “lead free” plumbing as defined
     by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking
     Water Act.

[1] The pump should be with a cover if used on cube ice maker.
[2] The pump motor stator will be with or without coating.

[Pb] Product also evaluated and determined to possess weighted average lead content of
     <=0.25% and complies with lead content requirements for “lead free” plumbing as defined
     by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking
     Water Act.

[Pb] Product also evaluated and determined to possess weighted average lead content of
     <=0.25% and complies with lead content requirements for “lead free” plumbing as defined
     by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking
     Water Act.

[2] (1) Indicates number of Ice Bins 
    (2) G indicates Giant size 
    (3) Optional Extension Sleeve 
    (4) SPL indicates client specific designation

[3] Model numbers may be followed by one of the following suffixes:
    SS   - Stainless steel exterior front and sides
    SBB - All stainless steel exterior

[1] Model numbers may be followed by the following suffixes:
    CP - Chill plate
    P  - Painted cabinet exterior
    S  - Stainless steel exterior
    SD - Optional shovel door

[1] (1) Blank (without space) to denote Standard Stainless Steel Model or X
        to denote Alternate Black Model
    (2) Modification Code: 2, 3, 4 or 5
    (3) 1 through 8, indicates electrical characteristics
    (4) Condenser type:
        A - Air cooled
        L - Liquid cooled
        R - Remote condenser
    (5) Cube size:
        C  - Full cube
        HK - Half cube
        K  - Cubelet
    Followed by the additional suffix M - Less top cover, but including chute assembly for
    stacking.
[Pb] Product also evaluated and determined to possess weighted average lead content of
     <=0.25% and complies with lead content requirements for “lead free” plumbing as defined
     by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking
     Water Act.

[1] (1) Blank (without space) to denote Standard Stainless Steel Model or X
        to denote Alternate Black Model
    (2) Modification Code: 2, 3, 4 or 5
    (3) 1 through 8, indicates electrical characteristics
    (4) Condenser type:
        A - Air cooled
        L - Liquid cooled
        R - Remote condenser
    (5) Cube size:
        C  - Full cube
        HK - Half cube
        K  - Cubelet
    Followed by the additional suffix M - Less top cover, but including chute assembly for
    stacking.

[1] (1) Blank (without space) to denote Stainless Steel Model or X
        to denote Alternate Black Model
    (2) Modification Code: 2, 3, 4, or 5
    (3) 1 through 8, indicates electrical characteristics
    (4) Condenser type:
        A - air cooled
        L - liquid cooled
        R - remote condenser
    (5) Cube size:
        C  - full cube
        HK - half cube
        K  - cubelet
    Followed by the additional suffix M - Less top cover, but including chute assembly
    for stacking.
[Pb] Product also evaluated and determined to possess weighted average lead content of
     <=0.25% and complies with lead content requirements for “lead free” plumbing as defined
     by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking
     Water Act.

[1] (1) Blank (without space) to denote Stainless Steel Model or X
        to denote Alternate Black Model
    (2) Modification Code: 2, 3, 4, or 5
    (3) 1 through 8, indicates electrical characteristics
    (4) Condenser type:
        A - air cooled
        L - liquid cooled
        R - remote condenser
    (5) Cube size:
        C  - full cube
        HK - half cube
        K  - cubelet
    Followed by the additional suffix M - Less top cover, but including chute assembly
    for stacking.

[1] 30 inch panel kit to be used with models IDT0450A, IYT0450A, IDT0500A, IYT0500A,
    IRT0500A, IDT0750A, IYT0750A, KDT0300A, KYT0300A, KDT0400A, KYT0400A, KDT0500A, and
    KYT0500A.
[2] 22 inch panel kit to be used with models IDT0420A, IYT0420A, IDT0620A, IYT0620A,
    IRT0620A, KDT0420A, and KYT0420A.
[3] 30 inch panel kit to be used with models ID0906A, IY0906A, and IR0906A.
[4] 30 inch panel kit to be used with models IDT1200A, IYT1200A, KDT1000A and KYT1000A.
[5] 48 inch panel kit to be used with models IDT1500A, IYT1500A, IDT1900A and IYT1900A.

[6] Unit intended to be used with already approved sanitizing procedures.
[7] For use with Manitowoc Indigo I series ice machines.

[1] (1) Evaporator option (D/Y/R)			
    	D - Dice			
    	Y - Half Dice			
    	R - Regular			
    (2) Character indicating refrigerant type (Optional)			
    (3) Four digits indicating nominal ice production per day			
    (4) Character indicating condenser type			
    (5) Character indicating country specific options (Optional)			
    (6) Three digits indicating electrical options 			
    (7) Character(s) indicating power cord and customer specific options

[2] (1) Evaporator option (D/Y/R)       
        D - Dice       
        Y - Half Dice       
        R - Regular       
    (2) Character indicating refrigerant type (Optional)       
    (3) Four digits indicating nominal ice production per day       
    (4) Character indicating condenser type       
    (5) Three digits Indicating electrical options       
    (6) Character(s) indicating customer/country specific options

[3] (1) Evaporator option (D/Y/R)			
        D - Dice			
        Y - Half Dice			
        R - Regular			
    (2) Character indicating refrigerant type (Optional)			
    (3) Four digits indicating nominal ice production per day.  1400, 1800 and 2100 
        Acceptable.			
    (4) Character indicating condenser type			
    (5) Three digits Indicating electrical options 			
    (6) Character(s) indicating customer/country specific options

[4] (1) Evaporator option (D/Y/R)    
        D - Dice    
        Y - Half Dice    
        R - Regular    
    (2) Character indicating refrigerant type (optional)    
    (3) Four digits indicating nominal ice production per day    
    (4) Character indicating condenser type(may include and optional "3")
    (5) Three digits indicating electrical options     
    (6) Character(s) indicating customer/country specific options 
    

[4] (1) Evaporator option (D/Y/R)    
        D - Dice    
        Y - Half Dice    
        R - Regular    
    (2) Character indicating refrigerant type (optional)    
    (3) Four digits indicating nominal ice production per day    
    (4) Character indicating condenser type(may include and optional "3")
    (5) Three digits indicating electrical options     
    (6) Character(s) indicating customer/country specific options 
    

[5] 30 inch panel kit to be used with models ID0452A, IY0454A, ID0502A, IY0504A, IR0500A,
    ID0606A, IY0606A, KD0250A, KY0250A, KD0350A, KY0350A, KD0500A, and KY0500A.
[6] 22 inch panel kit to be used with models ID0322A, IY0324A, ID0522A, IY0524A, IR0520A,
    KD0420A, and KY0420A.
[7] 30 inch panel kit to be used with models ID0906A, IY0906A, and IR0906A.

[10] (1) Evaporator option (D/Y/R)
           D - Dice
           Y - Half Dice
           R - Regular
     (2) Character indicating refrigerant type (Optional)
     (3) Four digits indicating nominal ice production per day
     (4) Character indicating condenser type
     (5) Character indicating country specific options (Optional)
     (6) Three digits indicating electrical options
     (7) Character(s) indicating power cord and customer specific options

[9] Not intended for customer self service.

[9] Not intended for customer self service.

[9] Not intended for customer self service.

[11] (1) Evaporator option (D/Y/R)
          D - Dice
          Y - Half Dice
          R - Regular
     (2) Character indicating refrigerant type (Optional)
     (3) Four digits indicating nominal ice production per day
     (4) Character indicating condenser type
     (5) Three digits Indicating electrical options
     (6) Character(s) indicating customer/country specific options

[1] (1) Evaporator option (D/Y/R)
        D - Dice
        Y - Half Dice
        R - Regular
    (2) Character indicating refrigerant type (optional)
    (3) Four digits indicating nominal ice production per day
    (4) Character indicating condenser type(may include and optional "3")
    (5) Three digits indicating electrical options
    (6) Character(s) indicating customer/country specific options

[2] 30 inch panel kit to be used with models ID0452A, IY0454A, ID0502A, IY0504A, IR0500A,
    ID0606A, IY0606A
[3] 22 inch panel kit to be used with models ID0322A, IY0324A, ID0522A, IY0524A, IR0520A.
[4] 30 inch panel kit to be used with models ID0852A, IY0854A, IR0850A, ID1002A, IY1004A,
    ID1106A, IY1106A, ID0906A, IY0906A, IR0906A.

[5] (1) Evaporator option (D/Y/R)			
        D - Dice			
        Y - Half Dice			
        R - Regular			
    (2) Character indicating refrigerant type (Optional)			
    (3) Four digits indicating nominal ice production per day.  1400, 1800 and 2100 
        Acceptable.			
    (4) Character indicating condenser type			
    (5) Three digits Indicating electrical options 			
    (6) Character(s) indicating customer/country specific options	

[1] (1) Evaporator option (D/Y/R)
        D - Dice
        Y - Half Dice
        R - Regular
    (2) Character indicating refrigerant type (optional)
    (3) Four digits indicating nominal ice production per day
    (4) Character indicating condenser type(may include and optional "3")
    (5) Three digits indicating electrical options
    (6) Character(s) indicating customer/country specific options

[6] (1) Character indicating refrigerant type (optional)
    (2) Four digits indicating nominal ice production per day 
    (3) "Y" Character indicating half dice evaporator (optional) 
    (4) Character indicating condenser type 
    (5) Three digits Indicating electrical options  
    (6) Character(s) indicating customer/country specific options

[7] (1) Evaporator option (D/Y)    
        D - Dice    
        Y - Half Dice    
    (2) Character indicating refrigerant type (Optional)    
    (3) Four digits indicating nominal ice production per day    
    (4) Character indicating condenser type (may include an optional "3")    
    (5) Three digits Indicating electrical options     
    (6) Character(s) indicating customer/country specific options    
    

[8] May be followed by suffix letter "D" indicating that it was produced in Latin America.

[1] Model numbers may be followed by one of the following suffixes:
    BB - All stainless steel exterior
    SS - Stainless steel exterior front and sides

[2] Model number may be followed by the following suffixes:
    # - Number of ice bins
    G - 48" deep unit
    SL - Extension sleeve
[3] Model number may be preceded by the following prefix:
    2 - 2 units to be installed back-to-back

[Pb] Product also evaluated and determined to possess weighted average lead content of
     <=0.25% and complies with lead content requirements for “lead free” plumbing as defined
     by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking
     Water Act.

[1] Suffix to indicate varying lengths, heights, and widths
    Prefix A, B, C, D, E to indicate type of door
[2] Above Listed models accepted with the following suffix designations:
    SA - Stainless steel interior and aluminum exterior
    SS - Stainless steel interior and exterior
    SE - Stainless steel interior and enamel exterior

[3] Dispensers only - ice making equipment installed by others

[2] (1)  Numeric suffix 0, 1, or 2 denoting voltage.
    (2)  Alphabetical suffix denoting condenser type:
        A - Air
        R - Remote
        W - Water

[1] Additional numeric suffix 1, 2, or 3.

[Pb] Product also evaluated and determined to possess weighted average lead content of
     <=0.25% and complies with lead content requirements for “lead free” plumbing as defined
     by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking
     Water Act.

[1] Additional numeric suffix 1, 2, or 3.

[2] (1)  Numeric suffix 0, 1, or 2 denoting voltage.
    (2)  Alphabetical suffix denoting condenser type:
        A - Air
        R - Remote
        W - Water

[1] Additional numeric suffix 1, 2, or 3.

[Pb] Product also evaluated and determined to possess weighted average lead content of
     <=0.25% and complies with lead content requirements for “lead free” plumbing as defined
     by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking
     Water Act.

[1] Additional numeric suffix 1, 2, or 3.

[2] (1)  Numeric suffix 0, 1, or 2 denoting voltage.
    (2)  Alphabetical suffix denoting condenser type:
        A - Air
        R - Remote
        W - Water

[1] Additional numeric suffix 1, 2, or 3.

[2] (1)  Numeric suffix 0, 1, or 2 denoting voltage.
    (2)  Alphabetical suffix denoting condenser type:
        A - Air
        R - Remote
        W - Water
[Pb] Product also evaluated and determined to possess weighted average lead content of
     <=0.25% and complies with lead content requirements for “lead free” plumbing as defined
     by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking
     Water Act.

[1] Additional numeric suffix 1, 2, or 3.

[Pb] Product also evaluated and determined to possess weighted average lead content of
     <=0.25% and complies with lead content requirements for “lead free” plumbing as defined
     by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking
     Water Act.

[2] (1) Numeric suffix 0, 1, or 2 denoting voltage
    (2) Alphabetical suffix denoting condenser type:
        A - Air
        R - Remote
        W - Water
[3] Ice Maker uses remote condenser model CI60(1)-90.
[Pb] Product also evaluated and determined to possess weighted average lead content of
     <=0.25% and complies with lead content requirements for “lead free” plumbing as defined
     by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking
     Water Act.

[1] Additional numeric suffix 1, 2, or 3

[2] (1) Numeric suffix 0, 1, or 2 denoting voltage
    (2) Alphabetical suffix denoting condenser type:
        A - Air
        R - Remote
        W - Water

[1] Additional numeric suffix 1, 2, or 3

[Pb] Product also evaluated and determined to possess weighted average lead content of
     <=0.25% and complies with lead content requirements for “lead free” plumbing as defined
     by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking
     Water Act.

[1] Additional numeric suffix 1, 2, or 3.

[2] (1) Numeric suffix 0, 1, or 2 denoting voltage
    (2) Alphabetical suffix denoting condenser type:
        A - Air
        R - Remote
        W - Water

[1] Additional numeric suffix 1, 2, or 3.

[Pb] Product also evaluated and determined to possess weighted average lead content of
     <=0.25% and complies with lead content requirements for “lead free” plumbing as defined
     by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking
     Water Act.

[1] Additional numeric suffix 1, 2, or 3.

[2] (1) Numeric suffix 0, 1, or 2 denoting voltage
    (2) Alphabetical suffix denoting condenser type:
        A - Air
        R - Remote
        W - Water

[1] Additional numeric suffix 1, 2, or 3.

[2] (1) Numeric suffix 0, 1, or 2 denoting voltage
    (2) Alphabetical suffix denoting condenser type:
        A - Air
        R - Remote
        W - Water
[Pb] Product also evaluated and determined to possess weighted average lead content of
     <=0.25% and complies with lead content requirements for “lead free” plumbing as defined
     by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking
     Water Act.

[1] Additional numeric suffix 1, 2, or 3.

[1] Above units with or without the following suffixes:
    AL - Aluminum exterior
    SS - Stainless steel exterior

[3] Certified models have serial number ending in suffix 'z' for the EF series or a serial
    number with the following format: YYMM1280XXXXXX, YYMM = last two digits of year of
    manufacture and Month (01-12), XXXXXX = sequential number.
[4] Models Listed may be sold under 'Ice-O-Matic' or other brand names.

[4] Models Listed may be sold under 'Ice-O-Matic' or other brand names.

[1] (1) Unit electrical characteristics 0, 1, 2, 3, 4, ...
    (2) Cube size:
        F - Full cube
        G - Grande cube
        H - Half cube
        J - Jumbo cube
    (3) Cabinet size (width): 22, 30, 48
    (4) Cabinet finish
        P - Painted or plastic
        S - Aluminum, Stainless steel or stainless finish
    (5) Condenser type:
        A - Air cooled
        L - Low side
        R - Remote
        T - Top air discharge (ICE and and CIM models only)
        W - Water cooled
    (6) Dispense mechanism:
        01 - Push button
        03 - Key
        04 - Ving card
    (7) Evaporator Finish
        EN - Electroless Nickel
        TN - Teflon Nickel
    (8) Design level 1, 2, 3, ...
    (9) Design level A, B, C, ...
[2] Model number may be followed by additional suffix letters and/or numbers. This will
    differentiate between electrical control systems (electro-mechanical vs. computer
    controlled).  This also allows for engineering design level digit.

[5] (1) Unit electrical characteristics; 0, 1, 2, 3, 4,...
    (2) Condenser type
        A - Air cooled
        W - Water cooled
        R - Remote
    (3) Design level: 1, 2, 3,...

[5] (1) Unit electrical characteristics; 0, 1, 2, 3, 4,...
    (2) Condenser type
        A - Air cooled
        W - Water cooled
        R - Remote
    (3) Design level: 1, 2, 3,...
[Pb] Product also evaluated and determined to possess weighted average lead content of
     <=0.25% and complies with lead content requirements for “lead free” plumbing as defined
     by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking
     Water Act.

[1] (1) Unit electrical characteristics 0, 1, 2, 3, 4, ...
    (2) Cube size:
        F - Full cube
        G - Grande cube
        H - Half cube
        J - Jumbo cube
    (3) Cabinet size (width): 22, 30, 48
    (4) Cabinet finish
        P - Painted or plastic
        S - Aluminum, Stainless steel or stainless finish
    (5) Condenser type:
        A - Air cooled
        L - Low side
        R - Remote
        T - Top air discharge (ICE and and CIM models only)
        W - Water cooled
    (6) Dispense mechanism:
        01 - Push button
        03 - Key
        04 - Ving card
    (7) Evaporator Finish
        EN - Electroless Nickel
        TN - Teflon Nickel
    (8) Design level 1, 2, 3, ...
    (9) Design level A, B, C, ...
[2] Model number may be followed by additional suffix letters and/or numbers. This will
    differentiate between electrical control systems (electro-mechanical vs. computer
    controlled).  This also allows for engineering design level digit.
[4] Models Listed may be sold under 'Ice-O-Matic' or other brand names.

[1] (1) Unit electrical characteristics 0, 1, 2, 3, 4, ...
    (2) Cube size:
        F - Full cube
        G - Grande cube
        H - Half cube
        J - Jumbo cube
    (3) Cabinet size (width): 22, 30, 48
    (4) Cabinet finish
        P - Painted or plastic
        S - Aluminum, Stainless steel or stainless finish
    (5) Condenser type:
        A - Air cooled
        L - Low side
        R - Remote
        T - Top air discharge (ICE and and CIM models only)
        W - Water cooled
    (6) Dispense mechanism:
        01 - Push button
        03 - Key
        04 - Ving card
    (7) Evaporator Finish
        EN - Electroless Nickel
        TN - Teflon Nickel
    (8) Design level 1, 2, 3, ...
    (9) Design level A, B, C, ...
[4] Models Listed may be sold under 'Ice-O-Matic' or other brand names.

[1] (1) M  - MAXX ICE model
        C  - CENTAUR model
        BC, BU - Berg

[1] (1) M  - MAXX ICE model
        C  - CENTAUR model
        BC, BU - Berg

[1] With various motor sizes (with fan or without fan, used for 115V/60Hz, 208~230V/60Hz,
    220~240V/50Hz)
[2] With various motor sizes (with fan, used for 208~230V/60Hz, 220~240V/50Hz)
[3] Available with cooling fan or without cooling fan. Available for 115V/60Hz,
    208~230V/60Hz, 220~240V/50Hz application.
[4] With ECM type motor of various sizes (with fan or without fan, used for 100-127V/50 or
    60Hz, 200-240V/50 or 60Hz, 90-240V/50 or 60H)
[5] Acceptable with 3/8" thru 1" hose adaptation and with various motor sizes.
[6] Available with water slinger.
    Available with optional shaft sleeve.
    Available with water slinger/cooling fan.
    Available with end cap screen.

[1] With various motor sizes (with fan or without fan, used for 115V/60Hz, 208~230V/60Hz,
    220~240V/50Hz)
[2] With various motor sizes (with fan, used for 208~230V/60Hz, 220~240V/50Hz)
[3] Available with cooling fan or without cooling fan. Available for 115V/60Hz,
    208~230V/60Hz, 220~240V/50Hz application.
[4] With ECM type motor of various sizes (with fan or without fan, used for 100-127V/50 or
    60Hz, 200-240V/50 or 60Hz, 90-240V/50 or 60H)
[5] Acceptable with 3/8" thru 1" hose adaptation and with various motor sizes.
[6] Available with water slinger.
    Available with optional shaft sleeve.
    Available with water slinger/cooling fan.
    Available with end cap screen.

[1] Suffix SS - Stainless steel exterior front and sides
    Suffix BB - All stainless steel exterior

[2] (1) Indicates number of Ice Bins.
    (2) G indicates Giant size.
    (3) Optional Extension Sleeve.
    (4) SPL indicates client specific designation.

[1] (1) - 3 or 5; Capacity in 100lb.
    (2) - 12, 25, or 40: Bin Storage in lb.    
    (3) - A, W: Air or water cooled condenser.    
    (4) - May or may not include AW: Wall mount (no drip tray).
[Pb] Product also evaluated and determined to possess weighted average lead content of
     <=0.25% and complies with lead content requirements for “lead free” plumbing as defined
     by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking
     Water Act.

[2] (1) Cube size: S - Small M - Medium
    (2) A - Air cooled 
        R - Remote cooled 
        W - Water cooled
    (3) 1, 3, 6, or 32 - Electrical variations
    (4) Indicates model revision
        A - Suffix indicates model revision. A Revision is "Original Release" model.
        B - Indicates in the second digit is for advanced features
        C - Indicates the same as B Suffix except with a different refrigeration tube
        which connects the ice head to the compressor
        D - After the Electrical Variation indicates Prodigy Refresh Design Change
        E - After the Electrical Variation indicates DOE Change
[3] (1) A  - Air Cooled 
        R  - Remote Cooled
        W  - Water Cooled 
    (2) S  - Stainless Steel with galvenized back
        SS - Complete stainless steel enclosure
    (3) 1, 3, 6 or 32 - Electrical Variations
    (4) Indicates model revision
        A - Suffix indicates model revision. A Revision is "Original Release" model.
        B - Indicates in the second digit is for advanced features
        D - After the Electrical Variation indicates Prodigy Refresh Design Change
        E - After the Electrical Variation indicates DOE
[4] (1) Cube Size:  S - Small  M - Medium				
    (2) A - Air Cooled, W - Water Cooled, R - Remote Cooled			(3) 1 or 6 - Electrical
    variations				
    (4) Indicates model revision				
     A - Suffix indicates model revision. "A" Revision is "Original Release" model.
[Pb] Product also evaluated and determined to possess weighted average lead content of
     <=0.25% and complies with lead content requirements for “lead free” plumbing as defined
     by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking
     Water Act.

[3] (1) A  - Air Cooled 
        R  - Remote Cooled
        W  - Water Cooled 
    (2) S  - Stainless Steel with galvenized back
        SS - Complete stainless steel enclosure
    (3) 1, 3, 6 or 32 - Electrical Variations
    (4) Indicates model revision
        A - Suffix indicates model revision. A Revision is "Original Release" model.
        B - Indicates in the second digit is for advanced features
        D - After the Electrical Variation indicates Prodigy Refresh Design Change
        E - After the Electrical Variation indicates DOE

[5] (1) A - Air Cooled, W - Water Cooled, R - Remote Cooled	
    (2) 1, 3, 6 or 32 - Electrical Variations				
    (3) A - Suffix indicates model revision. A Revision is
            "Original Release" model.
[Pb] Product also evaluated and determined to possess weighted average lead content of
     <=0.25% and complies with lead content requirements for “lead free” plumbing as defined
     by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking
     Water Act.

[5] (1) A - Air Cooled, W - Water Cooled, R - Remote Cooled	
    (2) 1, 3, 6 or 32 - Electrical Variations				
    (3) A - Suffix indicates model revision. A Revision is
            "Original Release" model.
[Pb] Product also evaluated and determined to possess weighted average lead content of
     <=0.25% and complies with lead content requirements for “lead free” plumbing as defined
     by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking
     Water Act.

[2] (1) Cube size: S - Small M - Medium
    (2) A - Air cooled 
        R - Remote cooled 
        W - Water cooled
    (3) 1, 3, 6, or 32 - Electrical variations
    (4) Indicates model revision
        A - Suffix indicates model revision. A Revision is "Original Release" model.
        B - Indicates in the second digit is for advanced features
        C - Indicates the same as B Suffix except with a different refrigeration tube
        which connects the ice head to the compressor
        D - After the Electrical Variation indicates Prodigy Refresh Design Change
        E - After the Electrical Variation indicates DOE Change

[6] (1) Cube size: 
        S- Small
        M - Medium      
    (2) A -Air cooled
        R - Remote cooled 
        W - Water cooled;         
    (3) 1, 2, 6, 32 or 63 - Electrical variations      
    (4) Indicates model revision      
        A - Suffix indicates model revision.  A Revision is "Original Release" model.      
        B - Indicates in the second digit is for advanced features      
        C - Indicates the same as B Suffix except with a different refrigeration tube which
            connects the ice head to the compressor      
        D - After the Electrical Variation indicates Prodigy Refresh Design Change      
        E - After the Electrical Variation indicates DOE Change
        F - After the Electrical Variation indicates Compressor Conversion
[Pb] Product also evaluated and determined to possess weighted average lead content of
     <=0.25% and complies with lead content requirements for “lead free” plumbing as defined
     by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking
     Water Act.

[Pb] Product also evaluated and determined to possess weighted average lead content of
     <=0.25% and complies with lead content requirements for “lead free” plumbing as defined
     by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking
     Water Act.

[6] (1) Cube size: 
        S- Small
        M - Medium      
    (2) A -Air cooled
        R - Remote cooled 
        W - Water cooled;         
    (3) 1, 2, 6, 32 or 63 - Electrical variations      
    (4) Indicates model revision      
        A - Suffix indicates model revision.  A Revision is "Original Release" model.      
        B - Indicates in the second digit is for advanced features      
        C - Indicates the same as B Suffix except with a different refrigeration tube which
            connects the ice head to the compressor      
        D - After the Electrical Variation indicates Prodigy Refresh Design Change      
        E - After the Electrical Variation indicates DOE Change
        F - After the Electrical Variation indicates Compressor Conversion
[Pb] Product also evaluated and determined to possess weighted average lead content of
     <=0.25% and complies with lead content requirements for “lead free” plumbing as defined
     by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking
     Water Act.