NSF Product and Service Listings

[1] Suffix is a combination of numerical and letter suffixes to indicate different options
    that do not affect design and construction or materials of product.

[4] May include any of the following optional suffixes:
    (1) Indicates Input Voltage
    (2) Indicates Distribution
    (3) Indicates Lens Insert Option
    (4) Indicates LED Type
    (5) Indicates Additional Options
    (6) Optional suffixes available, but none impact NSF certification

[1] Suffix is a combination of numerical and letter suffixes to indicate different options
    that do not affect design or construction and materials.

[1] (1) Suffix Indicating Width and Length				
    (2) Suffix Indicating Lumens				
    (3) Suffix Indicating CRI			
    (4) Suffix Indicating CCT				
    (5) Suffix indicating  MINIMUM DIMMING LEVEL				
    (6) Suffix Indicating CONTROL INPUT				
    (7)Suffix Indicating VOLTAGE				
    (8) CPX STEP LEVEL DIMMING: (BLANK), SLD SPX STEP LEVEL DIMMING: (BLANK), SLD				
    (9) Suffix Indicating  EMERGENCY OPTION				
    (10) CPX NLIGHT INTERFACE: (BLANK), SSE, NLIGHT, NLIGHTER, NLIGHTLM, NLIGHTERLM, 
         NLTAIR2, NLTAIREM2, JOT SPX NLIGHT INTERFACE: (BLANK), CL80, NLTAIR2 CPXTW 
         NLIGHT INTERFACE: NLT, NTLEMG				
    (11) CPX CONTROL: (BLANK) PIR, PDT, APIR, APDT, VPIR15, APIREM, APDTEM SPX CONTROL:
         (BLANK), RIO, RES7, RES7PDT, JOT, JOTVTX15 CPXTW CONTROL: (BLANK), PIR, PDT, APIR, 
         APDT				
    (12) Optional suffixes for configuration options which do not impact the NSF 
         Certification			
    (13) NAMP EXAM LEVEL:  NX - No Exam Mode,
         EXAM - Standard Exam Output				
    (14) Suffix Indicating NAMP DIFFUSER PATTERN:
         GRIN - Gradient Antimicrobial Lens
         PREF - Perforated Antimicrobial Lens 
         SAML - Smooth Antimicrobial Lens
[2] (1) Suffix Indicating Width and Length				
    (2) Suffix Indicating Lumens				
    (3) Suffix Indicating CCT				
    (4) CPXIP CONTROL INTERFACE: (BLANK), SSE, NLIGHT, NLIGHTER, NLIGHTLM, NLIGHTERLM, 
        NLTAIR2, NLTAIREM2, JOT CPXTWIP CONTROL INTERFACE: NLT, NTLEMG CPXIP CONTROL 
        INTERFACE: (BLANK), SSE, NLIGHT, NLIGHTER, NLIGHTLM, NLIGHTERLM, NLTAIR2, NLTAIREM2
    (5) Optional suffixes for configuration options which do not impact the NSF Certification

[4] Optional footnotes below are for configuration options which do not impact the NSF
    Certification:
    (1) Light output
    (2) Lens
    (3) Light distribution
    (4) Input voltage
    (5) Type of LED driver
    (6) LED CCT
    (7) LED CRI
    (8) Mounting
    (9) Optional suffixes available, but none impact NSF certification
    (10) Control and marketing options

[14] Optional footnotes below are for configuration options which do not impact NSF
     certification:
     (1) Trim
     (2) Length
     (3) Lumens
     (4) Door
     (5) Lens
     (6) Distribution
     (7) Voltage
     (8) Driver
     (9) Optional suffixes available but none impact NSF certification

[7] (1) LENGTH: L24, L48
    (2) 12000LM, 15000LM, 18000LM, 24000LM, 30000LM, 36000LM, 42000LM			
    (3) LENS: AFMD, ACMD, ATND, ATWD, AVCL	
    (4) Voltage: MVOLT, 120, 208, 240, 277, HVOLT, 347, 480			
    (5) DRIVER: GZ10	
    (6) CCT: 30K, 35K,40K, 50K			
    (7) CRI: 70CRI,80CRI, 90CRI
    (8) Optional suffix for Options & Controls:
        SBGR + (Alpha numeric Values)			
        SBG + (Alpha numeric Values) BTP	
        NLTAIR2 RMSOD + (Alpha numeric Values)	
        XAD + (Alpha numeric Values)
        NLTAIR2 RSBOR + (Alpha numeric Values)
        LSXR + (Alpha numeric Values)	
        nPP16 + (Alpha numeric Values)
        NLTAIR2 rPP20 + (Alpha numeric Values)
        NLTAIR2 RIO + (Alpha numeric Values)			
        SPD
        E15WMCP
        ETS
        WGX
        UPL
        OUTEND	
        AO
        CNP  + (Alpha numeric Values)	
        CP  + (Alpha numeric Values)
        MEZ +(Alpha numeric Values)			
        OCU + (Alpha numeric Values)
        OCS + (Alpha numeric Values)			
        OD + (Alpha numeric Values)
        RFD + (Alpha numeric Values)			
    (9) Finish:		
        DWHXD
    (10) Accessories: IBA + (Alpha numeric Values), XIBSMB+ (Alpha numeric Values), 
         XIBYMB, WGXIB, XIBDHK, XIBBSK

[8] (1) Suffix Indicating Width and Length				
    (2) Suffix Indicating Lumens				
    (3) Suffix Indicating CRI			
    (4) Suffix Indicating CCT				
    (5) Suffix indicating  MINIMUM DIMMING LEVEL				
    (6) Suffix Indicating CONTROL INPUT				
    (7) Suffix Indicating VOLTAGE				
    (8) CPX STEP LEVEL DIMMING: (BLANK), SLD SPX STEP LEVEL DIMMING: (BLANK), SLD				
    (9) Suffix Indicating  EMERGENCY OPTION				
    (10) CPX NLIGHT INTERFACE: (BLANK), SSE, NLIGHT, NLIGHTER, NLIGHTLM, NLIGHTERLM, 
         NLTAIR2, NLTAIREM2, JOT SPX NLIGHT INTERFACE: (BLANK), CL80, NLTAIR2 CPXTW 
         NLIGHT INTERFACE: NLT, NTLEMG				
    (11) CPX CONTROL: (BLANK) PIR, PDT, APIR, APDT, VPIR15, APIREM, APDTEM SPX CONTROL: 
         (BLANK), RIO, RES7, RES7PDT, JOT, JOTVTX15 CPXTW CONTROL: (BLANK), PIR, PDT, APIR, 
         APDT				
    (12) Optional suffixes for configuration options which do not impact the NSF 
         Certification			
    (13) NAMP EXAM LEVEL:  NX - No Exam Mode, EXAM - Standard Exam Output				
    (14) Suffix Indicating NAMP DIFFUSER PATTERN:
         GRIN - Gradient Antimicrobial Lens
         PREF - Perforated Antimicrobial Lens 
         SAML - Smooth Antimicrobial Lens
[9] (1) Suffix Indicating Width and Length				
    (2) Suffix Indicating Lumens				
    (3) Suffix Indicating CCT				
    (4)  CPXIP CONTROL INTERFACE: (BLANK), SSE, NLIGHT, NLIGHTER, NLIGHTLM, NLIGHTERLM, 
         NLTAIR2, NLTAIREM2, JOT CPXTWIP CONTROL INTERFACE: NLT, NTLEMG CPXIP CONTROL 
         INTERFACE:(BLANK), SSE, NLIGHT, NLIGHTER, NLIGHTLM, NLIGHTERLM, NLTAIR2, 
         NLTAIREM2				
    (5) Optional suffixes for configuration options which do not impact the NSF Certification

[10] Suffix is a combination of numerical and letter suffixes to indicate different
     options that do not affect design and construction or materials of product.

[11] (1) Length:
         L24
         L48
     (2) Lumens:
         2000LM, 3000LM, 4000LM, 5000LM, 6000LM, 7000LM, 8000LM, 9000LM,
         10000LM 12000LM, 14000LM, 15000LM, 18000LM
     (3) Lens:
         FPCL
         FPFL
     (5) Voltage:
         MVOLT
         120
         208
         240
         277
         HVOLT
         347
         480
     (6) CCT:
         3000K
         3500K
         4000K
         5000K
     (7) CRI:
         80CRI
         90CRI
     (8) Mounting: SMB
     (9) Optional suffix for Options & Controls:
         MSI10NWL
         NSI102L3VWL
         MSI10NWLDSCNWL
         MSI10XAWL
         MSI10XAWL924
         XAD
         XAD924
         NLTAIR2 RSBG10
         NLTAIR2 RIO
         DWH
         SPD

[1] (1) Length: 
        L24
        L48				
    (2) Lumens: 
        2000LM
        3000LM
        4000LM
        5000LM
        6000LM
        7000LM
        8000LM
        9000LM
        10000LM
        12000LM
        14000LM
        15000LM
        18000LM				
    (3) Lens: 
        FPCL
        FPFL				
    (5) Voltage: 
        MVOLT
        120
        208
        240
        277
        HVOLT
        347
        480	
    (6) CCT: 
        3000K
        3500K
        4000K
        5000K				
    (7) CRI: 
        80CRI
        90CRI				
    (8) Mounting: SMB				
    (9) Optional suffix for Options & Controls:				
        MSI10NWL				
        NSI102L3VWL				
        MSI10NWLDSCNWL				
        MSI10XAWL				
        MSI10XAWL924				
        XAD				
        XAD924				
        NLTAIR2 RSBG10				
        NLTAIR2 RIO				
        DWH				
        SPD

[6] (1) Optics: SO, SOND
    (2) Voltage: MVOLT, 120, 208, 240, 277, HVOLT, 347, 480	
    (3) CCT: 3000K, 4000K, 5000K
    (4) CRI: 70CRI, 80CRI, 90CRI
    (5) CCT: 3000K, 4000K, 5000K
    (6) Mounting: PM, UNM
    (7)  Any combination of optional suffix for options that do not affect NSF Certification.

[7] (1) Voltage: MVOLT, 120, 208, 240, 277, HVOLT, 347, 480
    (2) CCT: 30K, 40K, 50K
    (3) CRI: 70CRI, 80CRI, 90CRI
    (4) Mounting: ARCH00, ARCH45, ARCH135, ARAPMM200, ARAPMM300, ARKL00, ARPTL00, ARPTLLP00
    (5) Any combination of optional suffix for options that do not affect NSF Certification.

[8] The below suffixes are for configuration options which do not impact the NSF
    Certification.
    (1) Luemens
    (2) Lens
    (3) Distribution
    (4) Voltage
    (5) Driver
    (6) LED CCT
    (7) LED CRI
    (8) Any combination of optional suffix for options that do not affect NSF Certification.

[1] (1) Can be any number to represent wattage.
    (2) Can be any number, letter , slash or blank to represent function or input voltage.
    (3) May be any number, letter or blank to represent CCT and CRI.
    (4) May be any number, letter or blank to represent emission angle.
[2] (1) Can be 3 characters to designated wattage.
    (2) May be up to 4 characters to designate distribution.
    (3) May be up to 10 characters to designate distribution.
    (4) May be blank or up to 3 characters to designate operating
        voltage.
    (5) May be blank or up to 5 characters to designate fixture
        color.
    (6) May be blank or up to 5 characters for commercial purposes.

[3] (1) Can be any number to represent wattage.
    (2) May be any number, letter or blank to represent CCT and CRI.
    (3) May be any number, letter or blank to represent emission angle.
    (4) Can be any number, letter or blank to represent input voltage.
    (5) May be any number, letter or blank to represent designate fixture color.
    (6) May be any number, letter or blank for function commercial purposes.

[1] HBF refers to the series name.
    The following numbers refers to the wattage:
    80  - 80W
    100 - 100W
    150 - 150W
    200 - 200W
    (1) Refers to the CCT and will be indicated as following numbers: 
        27 - 2700K
        30 - 3000K
        35 - 3500K
        40 - 4000K
        50 - 5000K
        57 - 5700K
        65 - 6500K
    (2) Designates Mounting Means:
        G – Pole Mounted
        D – Ring Pendant	
    (3) Designates Sensor:
        S – With sensor
        N – Without sensor	
    (4) Designates Drive Type:
        I – Isolated
        C – Non-Isolated	
    (5) Designates Light Efficiency
        A – Hight Light Efficiency
        B – Normal Light Efficiency
    (6) Designates dimming
        N     - Non-dimming
        Blank - 1-10V dimming
[2] Designates luminaire wattage: 80w, 100w, 125w, 150w, 185w, 200w.  DLC type will be
    Premium.

[1] (1) Numerical value indicating total wattage of LED emitters.
    (2) Alpha numerical or numerical value indicating voltage.
    (3) CW - Cool white, WW - Warm white, or NW - Neutral white or RNW - Red Neutral 
        white.
    (4) Optional:
        -R designation indicates replacement fixture
        -D designation indicates dimming option
        -PD designation indicates Potentiometer dimming.
        -Alpha numeric number indicating lamp colour. The number will be between 1000 and 
        7000.
    (5) Optional:
        - D or PD designation indicates dimming fixture.
    
    

[1] (1) Can be any number; denotes input power. 
    (2) Can be 2, 4, 5, 8; denotes luminaire size.
    (3) Can be any alphanumerical character or blank, denotes the type of diffuser: 
        M - milky, C - clear, A - anti glare lens.
    (4) Can be D or blank: D for dimmable, blank for non-dimmable.
    (5) Can be any alphanumerical character or blank; denotes rated input voltage.
    (6) Can be 3P or 4P or blank; denotes the input power adjustable or unadjustable.
    (7) Can be any alphanumerical character or blank; denotes the series number.
    (8) Can be 3C, 3CK, xxK, 3C and 3CK; denotes 3 LED colour temperature can be set. 
        xxK - xx can be any alphanumerical characters and numbers, denotes LED colour 
        temperature.
    (9) Can be any alphanumerical character and number; denotes ARANI product code.

[1] (1) Followed by 080 to 0300  to represent  power.     	
    (2) Followed by 85 or 110  to represent  emission angle.    	
    (3) Followed by H,HY or L  to represent lm.	
    (4) Followed by XXK,TP-XXK,TC or TCP.
        XXK=CCT (e.g. 30K=3000K); TP-XXK =Single CCT with adjusting power
        XX can be any number, for example 30K=3000K; TC=Adjustable CCT
        TCP=Adjustable power and CCT.	
    (5) Can be (MS),(PIR),(BT) to indicate Microwave Sensor, PIR Motion sensor, Motion 
        Sensor with Bluetooth or blank to indicate without Motion Sensor.	
    (6) Can be blank or any letter or number or combination of letters and numbers to 
        represent commercial code.	
    (7) Can be any alphanumeric character and represents the internal version.
[2] (1) Can be any number denotes input power. 	
    (2) Can be 85 or 110 to represent the Light-emitting angle.	
    (3) Can be "H", "L" or "HY" (Y = number) to represent lm.	
    (4) Can be "30", "35", "40", "45", "50", "57", "65" to indicate color temperature.	
    (5) Can be (MS), (PIR), (BT) to indicate Microwave Sensor, PIR Motion sensor, Motion
        Sensor with Bluetooth or blank to indicate without Motion Sensor.	
    (6) Can be any alphanumerical character denote ARANI product code.	
[3] (1) Can be  080 to 0300 to represent power.	
    (2) Can be 85 or 110 to represent the Light-emitting angle.	
    (3) Can be ‘H’, ‘L’ or ‘HY’ (Y=number) to represent lm	
    (4) Can be ‘30’, ‘35’, ‘40’, ‘45’, ‘50’, ‘57’, ‘65’ to indicate color temperature	
    (5) Can be any alphanumeric character and represents the internal version.

[1] (1)  Random 4 digit numerical suffix generated for client.
    (2)  Optional random 2 digit numerical suffix generated for client.

[1] (1) Can be 2,4,8 - denotes the luminaire length
    (2) Can be 3, 4 or blank - denotes the Input power adjustable or unadjustable
    (3) Can be GTP, GTE, GTU, HBU, HBP, or any other alphanumerical character - denotes
        Archipelago product code
    (4) Can be S3, 3C, or any other alphanumerical characters - denotes 3 LED colour
        temperature
    (5) Can be S, P, or any other alphanumerical characters - denotes the series number 

[1] (1) Can be VTL2, VTL4, VTL5, VTL8, FNL, VPL2, VPL4, VPL5,VPL8, WPFL, SFG563, SFG560, 
        SFG564, SFG561, SFG492 denotes Stanpro product code and the luminaire size
    (2) may be PS or LS, PS or LA, PS or L denotes the Input power adjustable or 
        unadjustable;
    (3) Can be any alphanumerical characters denotes input power
    (4) Can be blank denotes dimmable, "N" denotes non-dimmable.
    (5) Can be any alphanumerical character  denotes rated input voltage;
    (6) Can be -3C, /3C, -xxK or /xxK 3C: denotes 3 LED Colour Temperature can be set xxK: 
        xx can be any alphanumerical characters denotes LED colour temperature
    (7) may be any alphanumerical character or blank denotes the type of diffuser; 
    (8) Can be any alphanumerical character or blank denotes the series number;
[2] (1) Can be VTL4,VTL8,FNL, SFG487, SFG490, SFG492,VPL4.VPL8,WPFL denotes luminaire size
    (2) Can be any alphanumerical characters denotes input power
    (3) Can be any alphanumerical character denotes rated input voltage
        -2 or -W - 120-277Vac 
        -8 or -H - 347Vac     
        -32 or -Q - 120-347Vac   
        -7 or - K -347-480Vac  
    (4) Can be 3C or xxK 
        3C  - denotes 3 LED Colour Temperature can be set
        xxK - xx can be any alphanumerical characters denotes LED colour temperature
    (5) Can be any alphanumerical character or blank denotes the series number
    (6) Can be /C or /A or blank denotes lens type
        Blank - Milk
        /C - Clear
        /A - Anti-glare
[3] (1) Can be S, S3C or any other alphanumerical character and number denotes Beluce's 
        product code;
    (2) Can be 2, 4, 5, 8 denotes the luminaire size;
    (3) May be PS or Blank denotes the Input power adjustable or unadjustable ;
    (4) Can be any alphanumerical characters denotes input power
    (5) Can be blank denotes dimmable, "N" denotes non-dimmable.
    (6) Can be -3C, /3C, -xxK or /xxK
        3C: denotes 3 LED Colour Temperature can be set
        xxK: xx can be any alphanumerical characters denotes LED colour temperature
    (7) Can be any alphanumerical character  denotes rated input voltage;
    (8) May be any alphanumerical character or blank denotes the type of diffuser; 
    (9) Can be any alphanumerical character or blank denotes the series number;

[1] (1) Can be any alphanumerical character, denotes color temperature of LED. 
    (2) Could be empty,45 or 90, empty means 120 degree beam angle, 
        45 means 45 degree beam angle and 90 means 90 degree beam
        angle of luminaires.
[2] The wattage will be 80W,100W,120W,150W. 
    The dimming will be 1-10V dimming or non dimming. 
    DLC type will be Premium
[3] (1) Represents color temperature, can be any number or letter.
    (2) Represents Mounting Bracket
        Empty - Pendant mounting
            G - Pole mounting
    (3) Represents Sensor type
            S - with sensor
        Empty - without sensor
    (4) Represents Driver
            I - Isolated driver
        Empty - Non-Isolated driver
    (5) Represents Lumens
            A - 190LM/W
        Empty - 150LM/W
[4] Designates luminaire wattage: 80w, 100w, 150w, 200w.  The dimming will be
    1-10V dimming or non dimming. DLC type will be Premium or standard.

[1] (1) 2 or 3-digit alphanumeric suffix representing light engine.
        S*  < 60W
        M*  < 80W
        H*  < 130W
        VH* < 160W
       Where (*) can be any number to represent lumen output
       and CRI.
    (2) Single-digit alphabetical suffix representing color temp.
        W - 3,500KN
        N - 4,000KC
        C - 5,000KA
        A - Amber UV Filtering
        Y - Yellow 101
    (3) Seven-digit alphanumeric suffix representing lense frame.
        LFSS304 - 18-gauge Type 304 Stainless Steel
        LFSS316 - 18-gauge Type 316 Stainless Steel
    (4) Three-digit alphabetic suffix representing lens glass.
        CTG - .125” Clear Tempered Glass
        CIA - .125” Clear Impact Acrylic
    (5) 2 or 3-digit alphabetic suffix indicating backup options.
        NB  - No Backup
        IBB - Integral Battery Back-up
        HBB - Class I, Div 2 Battery Back-up
    (6) 2 to 4-digit alphanumeric suffix indicating options.
        MS   - MIL STD 461F
        C1D2 - Class I, Div 2
        C2D2 - Class II, Div 2

[1] (1) Length and width in Feet

[1] (1) Length and width in Feet

[2] (1) Width in Inches, (2) Length in Inches

[3] (1) - Length in Feet and Inches or "CNR" - corner section. 

[4] (1) Length in inches

[3] (1) - Length in Feet and Inches or "CNR" - corner section. 

[3] (1) - Length in Feet and Inches or "CNR" - corner section. 

[3] (1) - Length in Feet and Inches or "CNR" - corner section. 

[5] (1) - Length in Feet.

[6] (1) indicates a 22 or 44 where 22 = 2ft x 2ft fixture and 44 = 4ft x 4ft fixture
    (2) indicates a 22 or 24 where 22 = 2ft x 2ft fixture and 24 = 2ft x 4ft fixture

[1] (1) can be any number or letter to represent wattage.
    (2) can be any number, letter or blank to represent function or input voltage.
    (3)may be any number, letter or blank to represent emission  angle.
    (4)may be  any  letter to represent non-dimmable or blank to represent dimmable.
    (5)may be any number, letter or blank to represent CCT and CRI.

[2] (1) can be any number or letter to represent wattage.
    (2) can be any number, letter, slash, or blank to represent function
        or input voltage.
    (3) may be any number, letter, or blank to represent emission angle.
    (4) may be any number, letter, or blank to represent CCT and CRI.

[1] May include any combination of the following optional suffixes 
    (1) Suffix indicating length
    (2) Suffix indicating operation
    (3) Suffix indicating output
    (4) Suffix indicating color temperature or any LED color
    (5) Suffix indicating voltage input
    (6) Suffix indicating mounting option
    (7) Any combination of optional suffixes for options that do not affect NSF
    certification
    (8) Other optional suffixes for controls

[1] Accepted for food contact.
[2] Black, clear, and white.

[1] Accepted for food contact.
[5] Beige, black, blue, brown, clear, cranberry, navy, red, sherwood green, teal,
    translucent blue, translucent green, translucent purple, translucent red,
    white, and yellow.

[1] Accepted for food contact.
[2] Black, clear, and white.

[6] Accepted for splash and non food zones only.  All colors accepted.

[3] Accepted for food contact.
[4] Black, clear, and white.

[7] Accepted for food contact.
[8] Black, clear, and white.

[3] Accepted for food contact.
[4] Black, clear, and white.

[1] Accepted for splash and non food zones only.  All colors accepted.

[1] Accepted for food contact.
[2] Beige, black, blue, clear, green, red, and white.

[1] Model numbers may be followed by two to five numbers and/or letters indicating color.
[2] May be suffixed by capacity in ounces.
[3] May or May not have suffixes indicating material type - PC - Polycarbonate, PE -
    Polyethylene, PSU - Polysulfone, PP or PPY Polypropylene, Tritan or SAN
[4] May or May not have suffixes indicating capacity, dimensions and/or size
[5] Models maybe pre-fixed by DX indicating Dinex Hospitality Brand.

[3] May or May not have suffixes indicating material type - PC - Polycarbonate, PE -
    Polyethylene, PSU - Polysulfone, PP or PPY Polypropylene, Tritan or SAN
[21] Model numbers may be followed by two to five numbers and/or letters indicating color,
     style or design.
[26] Model numbers may be suffixed with “Hi Heat” or “High Heat” to indicate the items are
     manufactured with materials approved for temperatures up to 375°F.
[27] Models maybe followed by 'H' or 'HH' to indicate 1 or 2 handles.
[30] Models maybe suffixed by IML to indicate 'In Mold Labelling'.

[1] Models may be suffixed by a material designation - PC - Polycarbonate, PE -
    Polyethylene, PSU - Polysulfone, PP or PPY Polypropylene, Tritan or SAN.
[2] Model numbers may be followed by 2 to 5 numbers and/or letters to indicate color
    designator.
[3] May be suffixed by capacity in ounces.
[4] Models may be suffixed by size in inches.
[5] Models maybe pre-fixed by DX indicating Dinex Hospitality Brand.

[1] Models may be suffixed by a material designation - PC - Polycarbonate, PE -
    Polyethylene, PSU - Polysulfone, PP or PPY Polypropylene, Tritan or SAN.
[6] Model numbers may be suffixed with “Hi Heat” or “High Heat” to indicate the items are
    manufactured with materials approved for temperatures up to 375°F.    
    
[8] Models maybe followed by 'H' or 'HH' to indicate 1 or 2 handles.
[24] Models maybe suffixed by IML to indicate 'In Mold Labelling'.
[25] Model numbers may be followed by two to five numbers and/or letters indicating color,
     style or design.

[1] Model numbers may be followed by two to five numbers and/or letters indicating color,
    style or design.
[2] May be suffixed by capacity in ounces.
[3] Models may be suffixed by a material designation - PC - Polycarbonate, PE -
    Polyethylene, PSU - Polysulfone, PP or PPY Polypropylene, Tritan or SAN.
[4] Models maybe pre-fixed by DX indicating Dinex Hospitality Brand.
[5] Models may be suffixed by size in inches.

[1] Model numbers may be followed by two to five numbers and/or letters indicating color,
    style or design.
[2] Models maybe suffixed by one or more of the following:
    "Hi Heat" or High Heat to indicate the items are manufactured with materials approved
    for use up to 375°F
    PC - Polycarbonate, PE - Polyethylene, PSU - Polysulfone
    PP or PPY Polypropylene, Tritan or SAN
    Solid, perforated or 'P' for perforated
    H' or 'HH' to indicate 1 or 2 handles.
    Size in inches
    Pan size
    IML to indicate 'In Mold Labeling'
    FLAT - Flat with no handle, HLD - handle, NOT - notched or FLATNOT - flat and notched

[1] Model numbers may be followed by two to five numbers and/or letters indicating color,
    style or design.
[2] Models maybe suffixed by one or more of the following:
    'Hi Heat' or 'High Heat' to indicate the items are manufactured with materials approved
    for use up to 375°F
    PC - Polycarbonate, PE - Polyethylene, PSU - Polysulfone, PP or PPY Polypropylene,
    Tritan or SAN
    Solid, perforated or 'P' for perforated
    'H' or 'HH' to indicate 1 or 2 handles
    Size in inches or Pan size
    IML to indicate 'In Mold Labeling'
    FLAT - Flat with no handle, HLD - Handle, NOT - Notched, FLATNOT - Flat and notched

[1] (1) Input Power: Can be any number between 010 to 420.		
    (2) Input Voltage Suffix: Can be “UL”, “UU”, “UH”.	
    (3) Color Temperature Suffix: Will be any two-digit numbers.	
[2] The housing will be with or without coating.

[2] Model number may include a suffix N followed by one - three digits.

[1] Suffix numbers on all models indicate size or capacity only.

[1] (1)  Indicates type of product: 1, 2
    (2)  Indicates market code: 1 to 9
    (3)  Indicates product code: 1 to 99
    (4)  Indicates power supplier: A, G, H, CT, C, D, R, ST, EM, SD, W, HE, HO, S or blank
    (5)  Indicates size of lamp: 1 to 99 or U1, U3, U6, H, VL
    (6)  Indicates wattage: 1 to 99W
    (7)  Indicates number of lamp: 1 to 4
    (8)  Indicates Ra: 7 to 9
    (9)  Indicates temperature: 27, 30, 35, 40, 50, 60, 65
    (10) Indicates temperature: 27, 30, 35, 40, 50, 60, 65 or blank
    (11) Indicates led manufacture: 0 to 99
    (12) Indicates lamp cap: R17d, Fa8, GX23, G24Q, G24D, E26, G5, G13 or blank
[2] (1)  Indicates type of product: 3, 4
    (2)  Indicates market code: 1 to 9
    (3)  Indicates product code: 1 to 99
    (4)  Indicates power supplier: T, TT, V, A, H, HTT, or blank
    (5)  Indicates wattage: 1 to 99W or 1 to 99/1 to 99W or 1 to 99 / 1to99 / 1to 99W
    (6)  Indicates Ra: 7 to 9
    (7)  Indicates temperature: 27, 30, 35, 40, 50, 60, 65
    (8)  Indicates temperature: 27, 30, 35, 40, 50, 60, 65 or blank
    (9)  Indicates led manufacture: 0 to 99
    (10) Indicates lamp size: (AXBFT): A 1to9; B 1to 9

[6] (1) Single-digit numerical suffix indicating number of lamp heads, 1 or 2 are 
        acceptable.	
    (2) Single digit alphabetical suffix indicating housing color.  B, G or W are 
        acceptable.	
    (3) Optional suffix for end-use application.  Blank or G are acceptable.

[4] (1) 1-digit alphabetical suffix indicating end-use location.  D, N or W are 
        acceptable.	
    (2) One or two-digit alphabetical suffix indicating battery type & remote 
        capability. N, R or RL are acceptable.	
    (3) 1-digit alphanumeric suffix indicating face options.  1 or U are acceptable.	
    (4) 1-digit alphabetical suffix indicating lettering color.  G or R are 
        acceptable.	
    (5) 1-digit alphabetical suffix indicating housing color.  B, G or W are 
        acceptable.	
    (6) 2 to 4-digit alphabetical suffix indicating diagnostic selections.  IC, ICT 
        and ICTA are acceptable.	
    (7) Optional 2 to 3-digit alphabetical suffix indicating options.  BF, BZ, EX, \
        FA, FL, and HTR are acceptable.

[5] (1) 1-digit alphabetical suffix indicating end-use location.  D, N or W are 
        acceptable.	
    (2) 1 to 3-digit alphanumeric suffix indicating operation type.  A, DC, N, 2C1 or 
        2C2 are acceptable.		
    (3) 1-digit alphanumeric suffix indicating face options.  1 or U are acceptable.	
    (4) 1-digit alphabetical suffix indicating lettering color.  G or R are 
        acceptable.	
    (5) 1-digit alphabetical suffix indicating housing color.  B, G or W are 
        acceptable.	
    (6) Optional 2 to 4-digit alphabetical suffix indicating diagnostic selections.  
        Blank, IC, ICT and ICTA are acceptable.	
    (7) Optional 2 to 3-digit alphabetical suffix indicating options.  BF, BZ, EX, 
        FA, FL, HTR and SW are acceptable.

[3] (1) Indicates inches in length:
        3  - 3 inches
        4  - 4 inches
        55 - 5.5 inches
        70 - 7 inches
        85 - 8.5 inches
    (2) Indicates Color temperature:
        W indicates Warm; N indicates Natural; C indicates Cool
    (3) Optional suffix 'M' to indicates Milky Lens

[4] Item may be offered with SANIGUARD™ antimicrobial treatment. The part number may contain
    the letter 'Q' to designate this treatment and may be followed by another number to
    describe the type of treatment. NOTE: This antimicrobial treatment has not been tested
    by NSF for efficacy at limiting spread of bacteria.

[50] (1) Two digit number indicating length in inches	
     (2) One digit number indicating width in inches	
     (3) Number of tubes (for LED tube lights); otherwise no designation in the
         nomenclature	
     (4) Wattage of each tube (for LED tube lights) or total wattage for the light (for
         LED strip lights). "W" will follow number representing wattage if LED tube 
         light. No "W" if LED strip light.	
     (5) Optional color temperature (designation not included in the nomenclature of all
         the models).	
         C - 5500°K - 6500°K	
         N - 4000°K - 5500°K	
         W - 2700°K - 3500°K

[52] (1) Indicates LED color Temperature		
         W - Indicates Warm White	
         N - Indicates Natural White	
         C - Indicates Cool White

[53] (1)XX After T4 indicates lamp wattage
     (2)XX After lamp wattage indicates nom. fixture length 
     (3)Suffix letter indicates color temperature
        C - 6400K
        N - 4100K
        W - 3000K

[1] (1) A     - 230VAC			
        Blank - 120VAC
    (2) S - Shatter resistant coating
        Blank without coating			
    (3) W - Warm white color temperature of LED			
        N - Natural white color temperature of LED			
        C - Cool white color temperature of LED	

[1] (1) Is a two digit number indicating total wattage for the light				
    (2) Is letter 'D' to indicate the light is dimmable - blank indicates the light is non-
        dimmable				
    (3) Indicates on of the follow LED's color temperature				
        W - indicates Warm White
        N - indicates Natural White
        C - indicates Cool White
    

[2] (1) Indicates LED color Temperature		
        W - Indicates Warm White	
        N - Indicates Natural White	
        C - Indicates Cool White

[3] (1) Indicates nominal length in inches				
    (2) Indicates LED's color temperature				
        W - to indicate warm white				
        N - to indicate natural white				
        C - to indicate cool white		

[4] (1)  Blank     - Sealed Medical 
         Open or X - Sealed Medical W/Bottom Trim/Lens or Vandal Resistant    
    (2)  Delivered Lumens: 1000, 1500, 2000, 3000, 4000, 5000, 6000, & 7000    
    (3)  Driver: 3 to 6 digit suffix    
    (4)  Options: May be IEMBOD or Blank + FP    
    (5)  Lumen Level: 1/2 (1000, 1500, 2000), 3/5 (3000, 4000, 5000), 6/7 (6000, 7000), 
         109030D2W (1000L, 90CRI, DIM 2 WARM), 159030D2W (1500L, 90 CRI, DIM 2 WARM), 
         209030D2W (2000L, 90CRI, DIM 2 WARM)    
    (6)  CRI: 8, 9, or 97    
    (7)  Color Temp: 4 digit suffix    
    (8)  V - Vandal Resistant w/Torx Screws
         S - Sealed Medical w/Phillips Head Screws    
    (9)  Reflector Light Distribution: 
         M  - Medium, 50°
         SW - Single Wall Wash    
    (10) Flange Type: 
         1 - Self Flanged
         2 - White Painted Flange    
    (11) Reflector Finish    
    (12) Option: Integral Emergency Test Switch Hole or Blank    
    (13) Option: Bottom Lens or Bottom Trim w/lens (Bottom Trim available on 6" only)

[5] (1)  Blank - Sealed Medical, Open (FLD6C or FLD4C);
         X - Sealed Medical W/Bottom Trim/Lens  (FLD6CX or  FLD4CX);
         FLD6X/OR=Sealed Medical Operating Room, w/BottomTrim/Lens 				
    (2)  Delivered Lumens -   FLD6= 250 -12,000;    FLD4= 250-6,000;    
    FLD6X/OR=250-7000				
    (3)  Driver - 3 to 12 digits - D010, DE010, D5LT, 1DL2, DLE, DE010-W2N, D5LT-W2N				
    (4)  Options - May be IEMBOD, EM7, IEM7, EM14, IEM14, IEMBOD, ETRD
    (5)  Lumen Level - 0208IC, 1020, 1015IC, 2540, 4560, 4060, 08259030D2W, 35459030D2W,
         1030W2N902765, 1030W2N902050, 35W2N902765, 35W2N902050				
    (6)  CRI - 90 or 97				
    (7)  Color Temp - 2400K, 2700K, 3000K, 3500K, 4000K,5000K				
    (8)  Trim/Reflectors are spun aluminum.  F6LC & F4LC - Sealed Medical Open, utilizing
         torsion springs;   F6LCXS, F6LCX/OR,& F4LCXS =Sealed Medical Enclosed, utilizing
         phillips head screws 
         Options -  M - Medium 50°beam, W - Wide, SW - Single Wall Wash, N - Narrow - (W,
    SW,
         & N options are only applicable in Sealed/Medical Open) 				
    (9)  Flange Type - 1 - Self Flanged (self flanged finish is same as the reflector
    finish)				
    (10) Flange Type - 2 - White Painted Flange
    (11) Trim/Reflector Finish - LI - specular clear; H - semi-specular clear, WMH - warm
    haze,
         MW - matte white, AMF - antimicrobial matte white, GW - gloss white				
    (12) Option - E - Integral Emergency Test Switch Hole				
    (13) Option - BL84, BL85 ,BL86, BL89AM, BL89BV (BL - Bottom Lens,  polycarbonate or
    acrylic
         lens options 84, 85, 86, 89AM, 89BV) 				
    (14) Option - BTR84, BTR85, BTR86, BTR89BV (BTR -Bottom Trim Ring and polycarbonate or
    acrylic
         lens options 84, 85, 96, 89BV)

[4] (1)  Blank     - Sealed Medical 
         Open or X - Sealed Medical W/Bottom Trim/Lens or Vandal Resistant    
    (2)  Delivered Lumens: 1000, 1500, 2000, 3000, 4000, 5000, 6000, & 7000    
    (3)  Driver: 3 to 6 digit suffix    
    (4)  Options: May be IEMBOD or Blank + FP    
    (5)  Lumen Level: 1/2 (1000, 1500, 2000), 3/5 (3000, 4000, 5000), 6/7 (6000, 7000), 
         109030D2W (1000L, 90CRI, DIM 2 WARM), 159030D2W (1500L, 90 CRI, DIM 2 WARM), 
         209030D2W (2000L, 90CRI, DIM 2 WARM)    
    (6)  CRI: 8, 9, or 97    
    (7)  Color Temp: 4 digit suffix    
    (8)  V - Vandal Resistant w/Torx Screws
         S - Sealed Medical w/Phillips Head Screws    
    (9)  Reflector Light Distribution: 
         M  - Medium, 50°
         SW - Single Wall Wash    
    (10) Flange Type: 
         1 - Self Flanged
         2 - White Painted Flange    
    (11) Reflector Finish    
    (12) Option: Integral Emergency Test Switch Hole or Blank    
    (13) Option: Bottom Lens or Bottom Trim w/lens (Bottom Trim available on 6" only)

[5] (1)  Blank - Sealed Medical, Open (FLD6C or FLD4C);
         X - Sealed Medical W/Bottom Trim/Lens  (FLD6CX or  FLD4CX);
         FLD6X/OR=Sealed Medical Operating Room, w/BottomTrim/Lens 				
    (2)  Delivered Lumens -   FLD6= 250 -12,000;    FLD4= 250-6,000;    
    FLD6X/OR=250-7000				
    (3)  Driver - 3 to 12 digits - D010, DE010, D5LT, 1DL2, DLE, DE010-W2N, D5LT-W2N				
    (4)  Options - May be IEMBOD, EM7, IEM7, EM14, IEM14, IEMBOD, ETRD
    (5)  Lumen Level - 0208IC, 1020, 1015IC, 2540, 4560, 4060, 08259030D2W, 35459030D2W,
         1030W2N902765, 1030W2N902050, 35W2N902765, 35W2N902050				
    (6)  CRI - 90 or 97				
    (7)  Color Temp - 2400K, 2700K, 3000K, 3500K, 4000K,5000K				
    (8)  Trim/Reflectors are spun aluminum.  F6LC & F4LC - Sealed Medical Open, utilizing
         torsion springs;   F6LCXS, F6LCX/OR,& F4LCXS =Sealed Medical Enclosed, utilizing
         phillips head screws 
         Options -  M - Medium 50°beam, W - Wide, SW - Single Wall Wash, N - Narrow - (W,
    SW,
         & N options are only applicable in Sealed/Medical Open) 				
    (9)  Flange Type - 1 - Self Flanged (self flanged finish is same as the reflector
    finish)				
    (10) Flange Type - 2 - White Painted Flange
    (11) Trim/Reflector Finish - LI - specular clear; H - semi-specular clear, WMH - warm
    haze,
         MW - matte white, AMF - antimicrobial matte white, GW - gloss white				
    (12) Option - E - Integral Emergency Test Switch Hole				
    (13) Option - BL84, BL85 ,BL86, BL89AM, BL89BV (BL - Bottom Lens,  polycarbonate or
    acrylic
         lens options 84, 85, 86, 89AM, 89BV) 				
    (14) Option - BTR84, BTR85, BTR86, BTR89BV (BTR -Bottom Trim Ring and polycarbonate or
    acrylic
         lens options 84, 85, 96, 89BV)

[4] (1)  Blank     - Sealed Medical 
         Open or X - Sealed Medical W/Bottom Trim/Lens or Vandal Resistant    
    (2)  Delivered Lumens: 1000, 1500, 2000, 3000, 4000, 5000, 6000, & 7000    
    (3)  Driver: 3 to 6 digit suffix    
    (4)  Options: May be IEMBOD or Blank + FP    
    (5)  Lumen Level: 1/2 (1000, 1500, 2000), 3/5 (3000, 4000, 5000), 6/7 (6000, 7000), 
         109030D2W (1000L, 90CRI, DIM 2 WARM), 159030D2W (1500L, 90 CRI, DIM 2 WARM), 
         209030D2W (2000L, 90CRI, DIM 2 WARM)    
    (6)  CRI: 8, 9, or 97    
    (7)  Color Temp: 4 digit suffix    
    (8)  V - Vandal Resistant w/Torx Screws
         S - Sealed Medical w/Phillips Head Screws    
    (9)  Reflector Light Distribution: 
         M  - Medium, 50°
         SW - Single Wall Wash    
    (10) Flange Type: 
         1 - Self Flanged
         2 - White Painted Flange    
    (11) Reflector Finish    
    (12) Option: Integral Emergency Test Switch Hole or Blank    
    (13) Option: Bottom Lens or Bottom Trim w/lens (Bottom Trim available on 6" only)

[5] (1)  Blank - Sealed Medical, Open (FLD6C or FLD4C);
         X - Sealed Medical W/Bottom Trim/Lens  (FLD6CX or  FLD4CX);
         FLD6X/OR=Sealed Medical Operating Room, w/BottomTrim/Lens 				
    (2)  Delivered Lumens -   FLD6= 250 -12,000;    FLD4= 250-6,000;    
    FLD6X/OR=250-7000				
    (3)  Driver - 3 to 12 digits - D010, DE010, D5LT, 1DL2, DLE, DE010-W2N, D5LT-W2N				
    (4)  Options - May be IEMBOD, EM7, IEM7, EM14, IEM14, IEMBOD, ETRD
    (5)  Lumen Level - 0208IC, 1020, 1015IC, 2540, 4560, 4060, 08259030D2W, 35459030D2W,
         1030W2N902765, 1030W2N902050, 35W2N902765, 35W2N902050				
    (6)  CRI - 90 or 97				
    (7)  Color Temp - 2400K, 2700K, 3000K, 3500K, 4000K,5000K				
    (8)  Trim/Reflectors are spun aluminum.  F6LC & F4LC - Sealed Medical Open, utilizing
         torsion springs;   F6LCXS, F6LCX/OR,& F4LCXS =Sealed Medical Enclosed, utilizing
         phillips head screws 
         Options -  M - Medium 50°beam, W - Wide, SW - Single Wall Wash, N - Narrow - (W,
    SW,
         & N options are only applicable in Sealed/Medical Open) 				
    (9)  Flange Type - 1 - Self Flanged (self flanged finish is same as the reflector
    finish)				
    (10) Flange Type - 2 - White Painted Flange
    (11) Trim/Reflector Finish - LI - specular clear; H - semi-specular clear, WMH - warm
    haze,
         MW - matte white, AMF - antimicrobial matte white, GW - gloss white				
    (12) Option - E - Integral Emergency Test Switch Hole				
    (13) Option - BL84, BL85 ,BL86, BL89AM, BL89BV (BL - Bottom Lens,  polycarbonate or
    acrylic
         lens options 84, 85, 86, 89AM, 89BV) 				
    (14) Option - BTR84, BTR85, BTR86, BTR89BV (BTR -Bottom Trim Ring and polycarbonate or
    acrylic
         lens options 84, 85, 96, 89BV)

[4] (1)  Blank     - Sealed Medical 
         Open or X - Sealed Medical W/Bottom Trim/Lens or Vandal Resistant    
    (2)  Delivered Lumens: 1000, 1500, 2000, 3000, 4000, 5000, 6000, & 7000    
    (3)  Driver: 3 to 6 digit suffix    
    (4)  Options: May be IEMBOD or Blank + FP    
    (5)  Lumen Level: 1/2 (1000, 1500, 2000), 3/5 (3000, 4000, 5000), 6/7 (6000, 7000), 
         109030D2W (1000L, 90CRI, DIM 2 WARM), 159030D2W (1500L, 90 CRI, DIM 2 WARM), 
         209030D2W (2000L, 90CRI, DIM 2 WARM)    
    (6)  CRI: 8, 9, or 97    
    (7)  Color Temp: 4 digit suffix    
    (8)  V - Vandal Resistant w/Torx Screws
         S - Sealed Medical w/Phillips Head Screws    
    (9)  Reflector Light Distribution: 
         M  - Medium, 50°
         SW - Single Wall Wash    
    (10) Flange Type: 
         1 - Self Flanged
         2 - White Painted Flange    
    (11) Reflector Finish    
    (12) Option: Integral Emergency Test Switch Hole or Blank    
    (13) Option: Bottom Lens or Bottom Trim w/lens (Bottom Trim available on 6" only)

[5] (1)  Blank - Sealed Medical, Open (FLD6C or FLD4C);
         X - Sealed Medical W/Bottom Trim/Lens  (FLD6CX or  FLD4CX);
         FLD6X/OR=Sealed Medical Operating Room, w/BottomTrim/Lens 				
    (2)  Delivered Lumens -   FLD6= 250 -12,000;    FLD4= 250-6,000;    
    FLD6X/OR=250-7000				
    (3)  Driver - 3 to 12 digits - D010, DE010, D5LT, 1DL2, DLE, DE010-W2N, D5LT-W2N				
    (4)  Options - May be IEMBOD, EM7, IEM7, EM14, IEM14, IEMBOD, ETRD
    (5)  Lumen Level - 0208IC, 1020, 1015IC, 2540, 4560, 4060, 08259030D2W, 35459030D2W,
         1030W2N902765, 1030W2N902050, 35W2N902765, 35W2N902050				
    (6)  CRI - 90 or 97				
    (7)  Color Temp - 2400K, 2700K, 3000K, 3500K, 4000K,5000K				
    (8)  Trim/Reflectors are spun aluminum.  F6LC & F4LC - Sealed Medical Open, utilizing
         torsion springs;   F6LCXS, F6LCX/OR,& F4LCXS =Sealed Medical Enclosed, utilizing
         phillips head screws 
         Options -  M - Medium 50°beam, W - Wide, SW - Single Wall Wash, N - Narrow - (W,
    SW,
         & N options are only applicable in Sealed/Medical Open) 				
    (9)  Flange Type - 1 - Self Flanged (self flanged finish is same as the reflector
    finish)				
    (10) Flange Type - 2 - White Painted Flange
    (11) Trim/Reflector Finish - LI - specular clear; H - semi-specular clear, WMH - warm
    haze,
         MW - matte white, AMF - antimicrobial matte white, GW - gloss white				
    (12) Option - E - Integral Emergency Test Switch Hole				
    (13) Option - BL84, BL85 ,BL86, BL89AM, BL89BV (BL - Bottom Lens,  polycarbonate or
    acrylic
         lens options 84, 85, 86, 89AM, 89BV) 				
    (14) Option - BTR84, BTR85, BTR86, BTR89BV (BTR -Bottom Trim Ring and polycarbonate or
    acrylic
         lens options 84, 85, 96, 89BV)

[4] (1)  Blank     - Sealed Medical 
         Open or X - Sealed Medical W/Bottom Trim/Lens or Vandal Resistant    
    (2)  Delivered Lumens: 1000, 1500, 2000, 3000, 4000, 5000, 6000, & 7000    
    (3)  Driver: 3 to 6 digit suffix    
    (4)  Options: May be IEMBOD or Blank + FP    
    (5)  Lumen Level: 1/2 (1000, 1500, 2000), 3/5 (3000, 4000, 5000), 6/7 (6000, 7000), 
         109030D2W (1000L, 90CRI, DIM 2 WARM), 159030D2W (1500L, 90 CRI, DIM 2 WARM), 
         209030D2W (2000L, 90CRI, DIM 2 WARM)    
    (6)  CRI: 8, 9, or 97    
    (7)  Color Temp: 4 digit suffix    
    (8)  V - Vandal Resistant w/Torx Screws
         S - Sealed Medical w/Phillips Head Screws    
    (9)  Reflector Light Distribution: 
         M  - Medium, 50°
         SW - Single Wall Wash    
    (10) Flange Type: 
         1 - Self Flanged
         2 - White Painted Flange    
    (11) Reflector Finish    
    (12) Option: Integral Emergency Test Switch Hole or Blank    
    (13) Option: Bottom Lens or Bottom Trim w/lens (Bottom Trim available on 6" only)

[5] (1)  Blank - Sealed Medical, Open (FLD6C or FLD4C);
         X - Sealed Medical W/Bottom Trim/Lens  (FLD6CX or  FLD4CX);
         FLD6X/OR=Sealed Medical Operating Room, w/BottomTrim/Lens 				
    (2)  Delivered Lumens -   FLD6= 250 -12,000;    FLD4= 250-6,000;    
    FLD6X/OR=250-7000				
    (3)  Driver - 3 to 12 digits - D010, DE010, D5LT, 1DL2, DLE, DE010-W2N, D5LT-W2N				
    (4)  Options - May be IEMBOD, EM7, IEM7, EM14, IEM14, IEMBOD, ETRD
    (5)  Lumen Level - 0208IC, 1020, 1015IC, 2540, 4560, 4060, 08259030D2W, 35459030D2W,
         1030W2N902765, 1030W2N902050, 35W2N902765, 35W2N902050				
    (6)  CRI - 90 or 97				
    (7)  Color Temp - 2400K, 2700K, 3000K, 3500K, 4000K,5000K				
    (8)  Trim/Reflectors are spun aluminum.  F6LC & F4LC - Sealed Medical Open, utilizing
         torsion springs;   F6LCXS, F6LCX/OR,& F4LCXS =Sealed Medical Enclosed, utilizing
         phillips head screws 
         Options -  M - Medium 50°beam, W - Wide, SW - Single Wall Wash, N - Narrow - (W,
    SW,
         & N options are only applicable in Sealed/Medical Open) 				
    (9)  Flange Type - 1 - Self Flanged (self flanged finish is same as the reflector
    finish)				
    (10) Flange Type - 2 - White Painted Flange
    (11) Trim/Reflector Finish - LI - specular clear; H - semi-specular clear, WMH - warm
    haze,
         MW - matte white, AMF - antimicrobial matte white, GW - gloss white				
    (12) Option - E - Integral Emergency Test Switch Hole				
    (13) Option - BL84, BL85 ,BL86, BL89AM, BL89BV (BL - Bottom Lens,  polycarbonate or
    acrylic
         lens options 84, 85, 86, 89AM, 89BV) 				
    (14) Option - BTR84, BTR85, BTR86, BTR89BV (BTR -Bottom Trim Ring and polycarbonate or
    acrylic
         lens options 84, 85, 96, 89BV)

[4] (1)  Blank     - Sealed Medical 
         Open or X - Sealed Medical W/Bottom Trim/Lens or Vandal Resistant    
    (2)  Delivered Lumens: 1000, 1500, 2000, 3000, 4000, 5000, 6000, & 7000    
    (3)  Driver: 3 to 6 digit suffix    
    (4)  Options: May be IEMBOD or Blank + FP    
    (5)  Lumen Level: 1/2 (1000, 1500, 2000), 3/5 (3000, 4000, 5000), 6/7 (6000, 7000), 
         109030D2W (1000L, 90CRI, DIM 2 WARM), 159030D2W (1500L, 90 CRI, DIM 2 WARM), 
         209030D2W (2000L, 90CRI, DIM 2 WARM)    
    (6)  CRI: 8, 9, or 97    
    (7)  Color Temp: 4 digit suffix    
    (8)  V - Vandal Resistant w/Torx Screws
         S - Sealed Medical w/Phillips Head Screws    
    (9)  Reflector Light Distribution: 
         M  - Medium, 50°
         SW - Single Wall Wash    
    (10) Flange Type: 
         1 - Self Flanged
         2 - White Painted Flange    
    (11) Reflector Finish    
    (12) Option: Integral Emergency Test Switch Hole or Blank    
    (13) Option: Bottom Lens or Bottom Trim w/lens (Bottom Trim available on 6" only)

[5] (1)  Blank - Sealed Medical, Open (FLD6C or FLD4C);
         X - Sealed Medical W/Bottom Trim/Lens  (FLD6CX or  FLD4CX);
         FLD6X/OR=Sealed Medical Operating Room, w/BottomTrim/Lens 				
    (2)  Delivered Lumens -   FLD6= 250 -12,000;    FLD4= 250-6,000;    
    FLD6X/OR=250-7000				
    (3)  Driver - 3 to 12 digits - D010, DE010, D5LT, 1DL2, DLE, DE010-W2N, D5LT-W2N				
    (4)  Options - May be IEMBOD, EM7, IEM7, EM14, IEM14, IEMBOD, ETRD
    (5)  Lumen Level - 0208IC, 1020, 1015IC, 2540, 4560, 4060, 08259030D2W, 35459030D2W,
         1030W2N902765, 1030W2N902050, 35W2N902765, 35W2N902050				
    (6)  CRI - 90 or 97				
    (7)  Color Temp - 2400K, 2700K, 3000K, 3500K, 4000K,5000K				
    (8)  Trim/Reflectors are spun aluminum.  F6LC & F4LC - Sealed Medical Open, utilizing
         torsion springs;   F6LCXS, F6LCX/OR,& F4LCXS =Sealed Medical Enclosed, utilizing
         phillips head screws 
         Options -  M - Medium 50°beam, W - Wide, SW - Single Wall Wash, N - Narrow - (W,
    SW,
         & N options are only applicable in Sealed/Medical Open) 				
    (9)  Flange Type - 1 - Self Flanged (self flanged finish is same as the reflector
    finish)				
    (10) Flange Type - 2 - White Painted Flange
    (11) Trim/Reflector Finish - LI - specular clear; H - semi-specular clear, WMH - warm
    haze,
         MW - matte white, AMF - antimicrobial matte white, GW - gloss white				
    (12) Option - E - Integral Emergency Test Switch Hole				
    (13) Option - BL84, BL85 ,BL86, BL89AM, BL89BV (BL - Bottom Lens,  polycarbonate or
    acrylic
         lens options 84, 85, 86, 89AM, 89BV) 				
    (14) Option - BTR84, BTR85, BTR86, BTR89BV (BTR -Bottom Trim Ring and polycarbonate or
    acrylic
         lens options 84, 85, 96, 89BV)

[6] (1) Delivered Lumens: 09, 10, 13, 15, 18, 20, 30				
    (2) Driver: 3 to 6 digit suffix				
    (3) Options: May be IEMBOD or Blank				
    (4) Power Module: 09, 10, 13, 15, 18, 20, 30				
    (5) CRI: 8 or 9				
    (6) Color Temp: 2 or 4 digit suffix				
    (7) Reflector Finish: LI, h, wmh, w				
    (8) Lens: 80, 84, 85, 89am, 93, 94, 89BV or 89BI				
    (9) Accessories: HB26, HB50, RMB, H347, H347200	

[4] (1)  Blank     - Sealed Medical 
         Open or X - Sealed Medical W/Bottom Trim/Lens or Vandal Resistant    
    (2)  Delivered Lumens: 1000, 1500, 2000, 3000, 4000, 5000, 6000, & 7000    
    (3)  Driver: 3 to 6 digit suffix    
    (4)  Options: May be IEMBOD or Blank + FP    
    (5)  Lumen Level: 1/2 (1000, 1500, 2000), 3/5 (3000, 4000, 5000), 6/7 (6000, 7000), 
         109030D2W (1000L, 90CRI, DIM 2 WARM), 159030D2W (1500L, 90 CRI, DIM 2 WARM), 
         209030D2W (2000L, 90CRI, DIM 2 WARM)    
    (6)  CRI: 8, 9, or 97    
    (7)  Color Temp: 4 digit suffix    
    (8)  V - Vandal Resistant w/Torx Screws
         S - Sealed Medical w/Phillips Head Screws    
    (9)  Reflector Light Distribution: 
         M  - Medium, 50°
         SW - Single Wall Wash    
    (10) Flange Type: 
         1 - Self Flanged
         2 - White Painted Flange    
    (11) Reflector Finish    
    (12) Option: Integral Emergency Test Switch Hole or Blank    
    (13) Option: Bottom Lens or Bottom Trim w/lens (Bottom Trim available on 6" only)

[5] (1)  Blank - Sealed Medical, Open (FLD6C or FLD4C);
         X - Sealed Medical W/Bottom Trim/Lens  (FLD6CX or  FLD4CX);
         FLD6X/OR=Sealed Medical Operating Room, w/BottomTrim/Lens 				
    (2)  Delivered Lumens -   FLD6= 250 -12,000;    FLD4= 250-6,000;    
    FLD6X/OR=250-7000				
    (3)  Driver - 3 to 12 digits - D010, DE010, D5LT, 1DL2, DLE, DE010-W2N, D5LT-W2N				
    (4)  Options - May be IEMBOD, EM7, IEM7, EM14, IEM14, IEMBOD, ETRD
    (5)  Lumen Level - 0208IC, 1020, 1015IC, 2540, 4560, 4060, 08259030D2W, 35459030D2W,
         1030W2N902765, 1030W2N902050, 35W2N902765, 35W2N902050				
    (6)  CRI - 90 or 97				
    (7)  Color Temp - 2400K, 2700K, 3000K, 3500K, 4000K,5000K				
    (8)  Trim/Reflectors are spun aluminum.  F6LC & F4LC - Sealed Medical Open, utilizing
         torsion springs;   F6LCXS, F6LCX/OR,& F4LCXS =Sealed Medical Enclosed, utilizing
         phillips head screws 
         Options -  M - Medium 50°beam, W - Wide, SW - Single Wall Wash, N - Narrow - (W,
    SW,
         & N options are only applicable in Sealed/Medical Open) 				
    (9)  Flange Type - 1 - Self Flanged (self flanged finish is same as the reflector
    finish)				
    (10) Flange Type - 2 - White Painted Flange
    (11) Trim/Reflector Finish - LI - specular clear; H - semi-specular clear, WMH - warm
    haze,
         MW - matte white, AMF - antimicrobial matte white, GW - gloss white				
    (12) Option - E - Integral Emergency Test Switch Hole				
    (13) Option - BL84, BL85 ,BL86, BL89AM, BL89BV (BL - Bottom Lens,  polycarbonate or
    acrylic
         lens options 84, 85, 86, 89AM, 89BV) 				
    (14) Option - BTR84, BTR85, BTR86, BTR89BV (BTR -Bottom Trim Ring and polycarbonate or
    acrylic
         lens options 84, 85, 96, 89BV)

[4] (1)  Blank     - Sealed Medical 
         Open or X - Sealed Medical W/Bottom Trim/Lens or Vandal Resistant    
    (2)  Delivered Lumens: 1000, 1500, 2000, 3000, 4000, 5000, 6000, & 7000    
    (3)  Driver: 3 to 6 digit suffix    
    (4)  Options: May be IEMBOD or Blank + FP    
    (5)  Lumen Level: 1/2 (1000, 1500, 2000), 3/5 (3000, 4000, 5000), 6/7 (6000, 7000), 
         109030D2W (1000L, 90CRI, DIM 2 WARM), 159030D2W (1500L, 90 CRI, DIM 2 WARM), 
         209030D2W (2000L, 90CRI, DIM 2 WARM)    
    (6)  CRI: 8, 9, or 97    
    (7)  Color Temp: 4 digit suffix    
    (8)  V - Vandal Resistant w/Torx Screws
         S - Sealed Medical w/Phillips Head Screws    
    (9)  Reflector Light Distribution: 
         M  - Medium, 50°
         SW - Single Wall Wash    
    (10) Flange Type: 
         1 - Self Flanged
         2 - White Painted Flange    
    (11) Reflector Finish    
    (12) Option: Integral Emergency Test Switch Hole or Blank    
    (13) Option: Bottom Lens or Bottom Trim w/lens (Bottom Trim available on 6" only)

[5] (1)  Blank - Sealed Medical, Open (FLD6C or FLD4C);
         X - Sealed Medical W/Bottom Trim/Lens  (FLD6CX or  FLD4CX);
         FLD6X/OR=Sealed Medical Operating Room, w/BottomTrim/Lens 				
    (2)  Delivered Lumens -   FLD6= 250 -12,000;    FLD4= 250-6,000;    
    FLD6X/OR=250-7000				
    (3)  Driver - 3 to 12 digits - D010, DE010, D5LT, 1DL2, DLE, DE010-W2N, D5LT-W2N				
    (4)  Options - May be IEMBOD, EM7, IEM7, EM14, IEM14, IEMBOD, ETRD
    (5)  Lumen Level - 0208IC, 1020, 1015IC, 2540, 4560, 4060, 08259030D2W, 35459030D2W,
         1030W2N902765, 1030W2N902050, 35W2N902765, 35W2N902050				
    (6)  CRI - 90 or 97				
    (7)  Color Temp - 2400K, 2700K, 3000K, 3500K, 4000K,5000K				
    (8)  Trim/Reflectors are spun aluminum.  F6LC & F4LC - Sealed Medical Open, utilizing
         torsion springs;   F6LCXS, F6LCX/OR,& F4LCXS =Sealed Medical Enclosed, utilizing
         phillips head screws 
         Options -  M - Medium 50°beam, W - Wide, SW - Single Wall Wash, N - Narrow - (W,
    SW,
         & N options are only applicable in Sealed/Medical Open) 				
    (9)  Flange Type - 1 - Self Flanged (self flanged finish is same as the reflector
    finish)				
    (10) Flange Type - 2 - White Painted Flange
    (11) Trim/Reflector Finish - LI - specular clear; H - semi-specular clear, WMH - warm
    haze,
         MW - matte white, AMF - antimicrobial matte white, GW - gloss white				
    (12) Option - E - Integral Emergency Test Switch Hole				
    (13) Option - BL84, BL85 ,BL86, BL89AM, BL89BV (BL - Bottom Lens,  polycarbonate or
    acrylic
         lens options 84, 85, 86, 89AM, 89BV) 				
    (14) Option - BTR84, BTR85, BTR86, BTR89BV (BTR -Bottom Trim Ring and polycarbonate or
    acrylic
         lens options 84, 85, 96, 89BV)

[4] (1)  Blank     - Sealed Medical 
         Open or X - Sealed Medical W/Bottom Trim/Lens or Vandal Resistant    
    (2)  Delivered Lumens: 1000, 1500, 2000, 3000, 4000, 5000, 6000, & 7000    
    (3)  Driver: 3 to 6 digit suffix    
    (4)  Options: May be IEMBOD or Blank + FP    
    (5)  Lumen Level: 1/2 (1000, 1500, 2000), 3/5 (3000, 4000, 5000), 6/7 (6000, 7000), 
         109030D2W (1000L, 90CRI, DIM 2 WARM), 159030D2W (1500L, 90 CRI, DIM 2 WARM), 
         209030D2W (2000L, 90CRI, DIM 2 WARM)    
    (6)  CRI: 8, 9, or 97    
    (7)  Color Temp: 4 digit suffix    
    (8)  V - Vandal Resistant w/Torx Screws
         S - Sealed Medical w/Phillips Head Screws    
    (9)  Reflector Light Distribution: 
         M  - Medium, 50°
         SW - Single Wall Wash    
    (10) Flange Type: 
         1 - Self Flanged
         2 - White Painted Flange    
    (11) Reflector Finish    
    (12) Option: Integral Emergency Test Switch Hole or Blank    
    (13) Option: Bottom Lens or Bottom Trim w/lens (Bottom Trim available on 6" only)

[5] (1)  Blank - Sealed Medical, Open (FLD6C or FLD4C);
         X - Sealed Medical W/Bottom Trim/Lens  (FLD6CX or  FLD4CX);
         FLD6X/OR=Sealed Medical Operating Room, w/BottomTrim/Lens 				
    (2)  Delivered Lumens -   FLD6= 250 -12,000;    FLD4= 250-6,000;    
    FLD6X/OR=250-7000				
    (3)  Driver - 3 to 12 digits - D010, DE010, D5LT, 1DL2, DLE, DE010-W2N, D5LT-W2N				
    (4)  Options - May be IEMBOD, EM7, IEM7, EM14, IEM14, IEMBOD, ETRD
    (5)  Lumen Level - 0208IC, 1020, 1015IC, 2540, 4560, 4060, 08259030D2W, 35459030D2W,
         1030W2N902765, 1030W2N902050, 35W2N902765, 35W2N902050				
    (6)  CRI - 90 or 97				
    (7)  Color Temp - 2400K, 2700K, 3000K, 3500K, 4000K,5000K				
    (8)  Trim/Reflectors are spun aluminum.  F6LC & F4LC - Sealed Medical Open, utilizing
         torsion springs;   F6LCXS, F6LCX/OR,& F4LCXS =Sealed Medical Enclosed, utilizing
         phillips head screws 
         Options -  M - Medium 50°beam, W - Wide, SW - Single Wall Wash, N - Narrow - (W,
    SW,
         & N options are only applicable in Sealed/Medical Open) 				
    (9)  Flange Type - 1 - Self Flanged (self flanged finish is same as the reflector
    finish)				
    (10) Flange Type - 2 - White Painted Flange
    (11) Trim/Reflector Finish - LI - specular clear; H - semi-specular clear, WMH - warm
    haze,
         MW - matte white, AMF - antimicrobial matte white, GW - gloss white				
    (12) Option - E - Integral Emergency Test Switch Hole				
    (13) Option - BL84, BL85 ,BL86, BL89AM, BL89BV (BL - Bottom Lens,  polycarbonate or
    acrylic
         lens options 84, 85, 86, 89AM, 89BV) 				
    (14) Option - BTR84, BTR85, BTR86, BTR89BV (BTR -Bottom Trim Ring and polycarbonate or
    acrylic
         lens options 84, 85, 96, 89BV)

[4] (1)  Blank     - Sealed Medical 
         Open or X - Sealed Medical W/Bottom Trim/Lens or Vandal Resistant    
    (2)  Delivered Lumens: 1000, 1500, 2000, 3000, 4000, 5000, 6000, & 7000    
    (3)  Driver: 3 to 6 digit suffix    
    (4)  Options: May be IEMBOD or Blank + FP    
    (5)  Lumen Level: 1/2 (1000, 1500, 2000), 3/5 (3000, 4000, 5000), 6/7 (6000, 7000), 
         109030D2W (1000L, 90CRI, DIM 2 WARM), 159030D2W (1500L, 90 CRI, DIM 2 WARM), 
         209030D2W (2000L, 90CRI, DIM 2 WARM)    
    (6)  CRI: 8, 9, or 97    
    (7)  Color Temp: 4 digit suffix    
    (8)  V - Vandal Resistant w/Torx Screws
         S - Sealed Medical w/Phillips Head Screws    
    (9)  Reflector Light Distribution: 
         M  - Medium, 50°
         SW - Single Wall Wash    
    (10) Flange Type: 
         1 - Self Flanged
         2 - White Painted Flange    
    (11) Reflector Finish    
    (12) Option: Integral Emergency Test Switch Hole or Blank    
    (13) Option: Bottom Lens or Bottom Trim w/lens (Bottom Trim available on 6" only)

[5] (1)  Blank - Sealed Medical, Open (FLD6C or FLD4C);
         X - Sealed Medical W/Bottom Trim/Lens  (FLD6CX or  FLD4CX);
         FLD6X/OR=Sealed Medical Operating Room, w/BottomTrim/Lens 				
    (2)  Delivered Lumens -   FLD6= 250 -12,000;    FLD4= 250-6,000;    
    FLD6X/OR=250-7000				
    (3)  Driver - 3 to 12 digits - D010, DE010, D5LT, 1DL2, DLE, DE010-W2N, D5LT-W2N				
    (4)  Options - May be IEMBOD, EM7, IEM7, EM14, IEM14, IEMBOD, ETRD
    (5)  Lumen Level - 0208IC, 1020, 1015IC, 2540, 4560, 4060, 08259030D2W, 35459030D2W,
         1030W2N902765, 1030W2N902050, 35W2N902765, 35W2N902050				
    (6)  CRI - 90 or 97				
    (7)  Color Temp - 2400K, 2700K, 3000K, 3500K, 4000K,5000K				
    (8)  Trim/Reflectors are spun aluminum.  F6LC & F4LC - Sealed Medical Open, utilizing
         torsion springs;   F6LCXS, F6LCX/OR,& F4LCXS =Sealed Medical Enclosed, utilizing
         phillips head screws 
         Options -  M - Medium 50°beam, W - Wide, SW - Single Wall Wash, N - Narrow - (W,
    SW,
         & N options are only applicable in Sealed/Medical Open) 				
    (9)  Flange Type - 1 - Self Flanged (self flanged finish is same as the reflector
    finish)				
    (10) Flange Type - 2 - White Painted Flange
    (11) Trim/Reflector Finish - LI - specular clear; H - semi-specular clear, WMH - warm
    haze,
         MW - matte white, AMF - antimicrobial matte white, GW - gloss white				
    (12) Option - E - Integral Emergency Test Switch Hole				
    (13) Option - BL84, BL85 ,BL86, BL89AM, BL89BV (BL - Bottom Lens,  polycarbonate or
    acrylic
         lens options 84, 85, 86, 89AM, 89BV) 				
    (14) Option - BTR84, BTR85, BTR86, BTR89BV (BTR -Bottom Trim Ring and polycarbonate or
    acrylic
         lens options 84, 85, 96, 89BV)

[4] (1)  Blank     - Sealed Medical 
         Open or X - Sealed Medical W/Bottom Trim/Lens or Vandal Resistant    
    (2)  Delivered Lumens: 1000, 1500, 2000, 3000, 4000, 5000, 6000, & 7000    
    (3)  Driver: 3 to 6 digit suffix    
    (4)  Options: May be IEMBOD or Blank + FP    
    (5)  Lumen Level: 1/2 (1000, 1500, 2000), 3/5 (3000, 4000, 5000), 6/7 (6000, 7000), 
         109030D2W (1000L, 90CRI, DIM 2 WARM), 159030D2W (1500L, 90 CRI, DIM 2 WARM), 
         209030D2W (2000L, 90CRI, DIM 2 WARM)    
    (6)  CRI: 8, 9, or 97    
    (7)  Color Temp: 4 digit suffix    
    (8)  V - Vandal Resistant w/Torx Screws
         S - Sealed Medical w/Phillips Head Screws    
    (9)  Reflector Light Distribution: 
         M  - Medium, 50°
         SW - Single Wall Wash    
    (10) Flange Type: 
         1 - Self Flanged
         2 - White Painted Flange    
    (11) Reflector Finish    
    (12) Option: Integral Emergency Test Switch Hole or Blank    
    (13) Option: Bottom Lens or Bottom Trim w/lens (Bottom Trim available on 6" only)

[5] (1)  Blank - Sealed Medical, Open (FLD6C or FLD4C);
         X - Sealed Medical W/Bottom Trim/Lens  (FLD6CX or  FLD4CX);
         FLD6X/OR=Sealed Medical Operating Room, w/BottomTrim/Lens 				
    (2)  Delivered Lumens -   FLD6= 250 -12,000;    FLD4= 250-6,000;    
    FLD6X/OR=250-7000				
    (3)  Driver - 3 to 12 digits - D010, DE010, D5LT, 1DL2, DLE, DE010-W2N, D5LT-W2N				
    (4)  Options - May be IEMBOD, EM7, IEM7, EM14, IEM14, IEMBOD, ETRD
    (5)  Lumen Level - 0208IC, 1020, 1015IC, 2540, 4560, 4060, 08259030D2W, 35459030D2W,
         1030W2N902765, 1030W2N902050, 35W2N902765, 35W2N902050				
    (6)  CRI - 90 or 97				
    (7)  Color Temp - 2400K, 2700K, 3000K, 3500K, 4000K,5000K				
    (8)  Trim/Reflectors are spun aluminum.  F6LC & F4LC - Sealed Medical Open, utilizing
         torsion springs;   F6LCXS, F6LCX/OR,& F4LCXS =Sealed Medical Enclosed, utilizing
         phillips head screws 
         Options -  M - Medium 50°beam, W - Wide, SW - Single Wall Wash, N - Narrow - (W,
    SW,
         & N options are only applicable in Sealed/Medical Open) 				
    (9)  Flange Type - 1 - Self Flanged (self flanged finish is same as the reflector
    finish)				
    (10) Flange Type - 2 - White Painted Flange
    (11) Trim/Reflector Finish - LI - specular clear; H - semi-specular clear, WMH - warm
    haze,
         MW - matte white, AMF - antimicrobial matte white, GW - gloss white				
    (12) Option - E - Integral Emergency Test Switch Hole				
    (13) Option - BL84, BL85 ,BL86, BL89AM, BL89BV (BL - Bottom Lens,  polycarbonate or
    acrylic
         lens options 84, 85, 86, 89AM, 89BV) 				
    (14) Option - BTR84, BTR85, BTR86, BTR89BV (BTR -Bottom Trim Ring and polycarbonate or
    acrylic
         lens options 84, 85, 96, 89BV)

[4] (1)  Blank     - Sealed Medical 
         Open or X - Sealed Medical W/Bottom Trim/Lens or Vandal Resistant    
    (2)  Delivered Lumens: 1000, 1500, 2000, 3000, 4000, 5000, 6000, & 7000    
    (3)  Driver: 3 to 6 digit suffix    
    (4)  Options: May be IEMBOD or Blank + FP    
    (5)  Lumen Level: 1/2 (1000, 1500, 2000), 3/5 (3000, 4000, 5000), 6/7 (6000, 7000), 
         109030D2W (1000L, 90CRI, DIM 2 WARM), 159030D2W (1500L, 90 CRI, DIM 2 WARM), 
         209030D2W (2000L, 90CRI, DIM 2 WARM)    
    (6)  CRI: 8, 9, or 97    
    (7)  Color Temp: 4 digit suffix    
    (8)  V - Vandal Resistant w/Torx Screws
         S - Sealed Medical w/Phillips Head Screws    
    (9)  Reflector Light Distribution: 
         M  - Medium, 50°
         SW - Single Wall Wash    
    (10) Flange Type: 
         1 - Self Flanged
         2 - White Painted Flange    
    (11) Reflector Finish    
    (12) Option: Integral Emergency Test Switch Hole or Blank    
    (13) Option: Bottom Lens or Bottom Trim w/lens (Bottom Trim available on 6" only)

[5] (1)  Blank - Sealed Medical, Open (FLD6C or FLD4C);
         X - Sealed Medical W/Bottom Trim/Lens  (FLD6CX or  FLD4CX);
         FLD6X/OR=Sealed Medical Operating Room, w/BottomTrim/Lens 				
    (2)  Delivered Lumens -   FLD6= 250 -12,000;    FLD4= 250-6,000;    
    FLD6X/OR=250-7000				
    (3)  Driver - 3 to 12 digits - D010, DE010, D5LT, 1DL2, DLE, DE010-W2N, D5LT-W2N				
    (4)  Options - May be IEMBOD, EM7, IEM7, EM14, IEM14, IEMBOD, ETRD
    (5)  Lumen Level - 0208IC, 1020, 1015IC, 2540, 4560, 4060, 08259030D2W, 35459030D2W,
         1030W2N902765, 1030W2N902050, 35W2N902765, 35W2N902050				
    (6)  CRI - 90 or 97				
    (7)  Color Temp - 2400K, 2700K, 3000K, 3500K, 4000K,5000K				
    (8)  Trim/Reflectors are spun aluminum.  F6LC & F4LC - Sealed Medical Open, utilizing
         torsion springs;   F6LCXS, F6LCX/OR,& F4LCXS =Sealed Medical Enclosed, utilizing
         phillips head screws 
         Options -  M - Medium 50°beam, W - Wide, SW - Single Wall Wash, N - Narrow - (W,
    SW,
         & N options are only applicable in Sealed/Medical Open) 				
    (9)  Flange Type - 1 - Self Flanged (self flanged finish is same as the reflector
    finish)				
    (10) Flange Type - 2 - White Painted Flange
    (11) Trim/Reflector Finish - LI - specular clear; H - semi-specular clear, WMH - warm
    haze,
         MW - matte white, AMF - antimicrobial matte white, GW - gloss white				
    (12) Option - E - Integral Emergency Test Switch Hole				
    (13) Option - BL84, BL85 ,BL86, BL89AM, BL89BV (BL - Bottom Lens,  polycarbonate or
    acrylic
         lens options 84, 85, 86, 89AM, 89BV) 				
    (14) Option - BTR84, BTR85, BTR86, BTR89BV (BTR -Bottom Trim Ring and polycarbonate or
    acrylic
         lens options 84, 85, 96, 89BV)

[6] (1) Delivered Lumens: 09, 10, 13, 15, 18, 20, 30				
    (2) Driver: 3 to 6 digit suffix				
    (3) Options: May be IEMBOD or Blank				
    (4) Power Module: 09, 10, 13, 15, 18, 20, 30				
    (5) CRI: 8 or 9				
    (6) Color Temp: 2 or 4 digit suffix				
    (7) Reflector Finish: LI, h, wmh, w				
    (8) Lens: 80, 84, 85, 89am, 93, 94, 89BV or 89BI				
    (9) Accessories: HB26, HB50, RMB, H347, H347200	

[7] (1) Number indicating length of the luminaire: 2, 4 or 8 feet long    
    (2) Number of LED Modules in cross-section: 1 or 2    
    (3) Driver Output Setting: LO - Low, STD - Standard, HI - High    
    (4) Color Temp: 30 - 3000K, 35 - 3500K, 40 - 4000K, 50 - 5000K, R53 or G52    
    (5) Input Voltage: 120, 277, UNV, 347    
    (6) Driver: EDC, EDD, ED1D, 5LTD, LUA/ES or LUA/3W    
    (7) Number of circuits: 1 or 2    
    (8) Internal Diffuser: Blank (no diffuser), iK12 or OPL

[8] (1) Numeric suffix indicating length
    (2) Lens Type:
        CA08  - 0.080"  Thick clear acrylic
        CA125 - 0.125" Thick clear polycarbonate
        CP125 - 0.125" Thick clear polycarbonate
        CP187 - 0.187" Thick clear polycarbonate
        CP250 - 0.250" Thick clear polycarbonate
    (3) Optional suffix indicating voltage
    (4) Emergency
        Blank - None
        EL7W  - 7-Watt 120-277V emergency battery pack installed
        EL14W - 14-watt 120-277V emergency battery pack installed
        ETRD  - Emergency Transfer Relay with dimming control
    (5) Alpha numeric suffix indicating CCT
    (6) Alpha numeric suffix indicating wiring options
    (7) Driver type:
        Blank - 10% dimming with Lumen and CCT Select Switches
        HCD   - 1% Dimming
        5LTD  - 10% 0-10V Dali
        5LTHD - 1% 0-10V Dali
        SD    - Step Dimming
        LH    - Lutron HiLume 1% Ecosystem
        L5    - Lutron 5-Series 5% Ecocystem
        WN    - Wavelinx wireless fixture, no sensor
[9] (1) Size:
        22 - 2' x 2'
        24 - 2' x 4'
        14 - 1' x 4'
    (2) Lumen Output:
        High Efficacy     - xxHE where xx represents Lumen Output
        Standard Efficacy - xx where xx represents Lumen Output
    (3) CCT:
        35 - 3500K
        40 - 4000K
        50 - 5000K
    (4) Bottom Lens:
        CA080 - 0.080" Clear Acrylic
        CA125 - 0.125" Clear Acrylic
        CP125 - Clear Polycarbonate 0.125"
        CP187 - Clear Polycarbonate 0.187"
        CP250 - Clear Polycarbonate 0.250" 
    (5) Options Emergency:
        EL7W
        EL14W

[13] NSF Certified production beginning with date code 12/21/06.
[14] Intended for splash/nonfood zone applications.
[17] (1) Row/Node Configuration    
         Blank - Individual    
         BR    - Beginning of Run    
         MR    - Middle of Run    
         ER    - End of Run    
     (2) Length     
         1 - 1'    
         2 - 2'    
         4 - 4'    
         8 - 8'    
     (3) Number indicating LED version    
     (4) Number of LED's    
         1 - (1) LED Module in Cross-Section    
         2 - (2) LED Module in Cross-Section    
         3 - (3) LED Module in Cross-Section (HVL12 Only)    
     (5) Illumination Level    
         STD - Standard    
         LO  - Low    
         HI  - High    
     (6) Color Temperature    
         30 - 3000 Kelvin    
         35 - 3500 Kelvin    
         40 - 4000 Kelvin    
         50 - 5000 Kelvin
     (7) Voltage    
         120 - 120V    
         277 - 277V    
         347 - 347V    
         UNV - 120-277V    
         UNC - 347-480V
     (8) Lens Type    
         O - Opal Smooth (no ribs), Polycarbonate    
         C - Clear Lens, ribbed, Polycarbonate    
     (9) Driver    
         EDC_  - Electronic Driver, Non-Dimming    
         EDD_  - Electronic Driver, 0-10v Dimming 10%    
         ED1D_ - Electronic Driver, 0-10v Dimming 1%    
     (10) No. of Circuits    
          1 - 1 Circuit    
          2 - 2 Circuit 
          3 - 3 Circuit    
          4 - 4 Circuit    
     (11) End Caps
          D - Decorative, End Caps, Sculpted
          S - Smooth End Caps, Flat
     (12) Options
          PM            - Pendant Mount
          NSF           - Certified NSF Rating for Food Industry
          TILW          - Tandem In-Line Wiring (8' fixture only)
          PI1BLK-6PP-WG - Single circuit harness, hot conductor black and white neutral
                          connected to driver(s), with ground
          PI2BLK-6PP-WG - Dual circuit harness, hot black conductor and white neutral
                          connected to driver(s), with ground
          PI2BLU-6PP-WG - Dual circuit harness, hot blue conductor and white neutral
                          connected to driver(s), with ground
          IB/OB         - Inboard/outboard wiring (only necessary for 8T)
          OS1           - Integrated Motion/Occupancy Sensor (within lens)
                           connected to 1 LED module. Voltage specific
          OS2           - Integrated Motion/Occupancy Sensor (within lens)
                          connected to 2 LED modules. Voltage specific
          EL7W          - 7W Emergency Battery Pack
          EL10W         - 10W Emergency Battery Pack
          EL14W         - 14W Emergency Battery Pack
          IP64          - IP64 compliant
          NAT           - Natatorium Finish, Aluminum Components, Stainless steel Hardware
     (13) Finish
          Blank - Architectural White
          BK    - Architectural Black
          DP    - Dark Platinum
     

[11] (1) 3 digit alpha numeric value indicating lamp type 
     (2) 2 digit numerical value indicating lumens 
     (3) 2 or 3 digit alpha charter indicating lens type 
     (4) 3 or 4 digit alpha numeric value indicating voltage 
     (5) 4 digit alpha numeric value indicating color temp 
     (6) Optional suffix for emergency option 
     (7) 3 digit alph numeric value indicating driver type and number 
     (8) Optional suffix WL = Wet Label 
     (9) Alpha numeric suffix indicating options 
         Blank  - Plastic latches and (2) end watertight hubs (all watertight hubs 
         have 1/2" conduit entry) 
         C3     - 3' Power cord 
         C6     - 6' Power cord 
         PC3-   - 3' Power cord & plug (specify voltage) 
         PC6-   - 6' Power cord & plug (specify voltage) 
         VRS    - Vandal resistant screws for latches 
         MS     - Damp listed motion sensor 
         MSO/WL - Wet listed motion sensor 360 
         SSL    - Stainless steel latches 
     (10) Alpha charter indicating packaging 
     

[1] (1) Followed by 12, 18, 24, or 30 to represent light levels corresponding to 100W, 150W,
    
        200W, 240W.	
    (2) Followed by 40K or 50K representing color temperature.

[1] Walk-ins

[1] NSF Certified units beginning production date of 4/21/2010.
[3] Available in full and half size.

[1] (1) Three digit alpha-numeric suffix representing nominal lumens				
        40L  -  4000 lumens
        60L  -  6000 lumens				
    (2) Three digit alphabetic suffix representing lens type
        LFA  -  Frosted Acrylic
        LRA  -  Ribbed Acrylic
        LFP  -  Frosted Polycarbonate				
    (3) Three digit alpha-numeric suffix representing LED color temperature				
        35K  -  3500 CCT
        40K  -  4000 CCT
        50K  -  5000 CCT				
    (4) One digit numeric suffix representing CRI (Color Rendering Index)				
        8  -  80 CRI
    (5) Two digit alpha-numeric suffix representing input voltage				
        UL - 120-277 VAC
        UH - 347/480 VAC				
    (6) Optional three digit alphabetical suffix representing latch type
        SSL  -  Stainless Steel Latches

[1] (1) Can be 2, 4, 5, 8 denotes the luminaire size.
    (2) Can be any any numbers denotes input Power.
    (3) Can be -3P, -4P or blank denotes the Input power adjustable or unadjustable.
    (4) Can be any alphanumerical character or blank denotes the type of diffuser.
    (5) Can be 3CK;3CCT or xxK. 
        3CK and 3CCT: denotes 3 LED Colour Temperature can be set.
        xxK: xx can be any alphanumerical characters and numbers denotes led color 
        temperature.
    (6) Can be any alphanumerical character denotes rated input voltage: 
        LV - 120-277Vac
        UD - 120-347Vac 
        HV - 347-480Vac

[1] (1) Can be any number to represent emission angle	
    (2) Can be any number, letter or blank to represent CRI and CCT
[2] (1) Can be any number to represent wattage.
    (2) Can be any number, letter , slash or blank to represent function or input voltage.
    (3) May be any number, letter or blank to represent emission angle.
    (4) May be any number, letter or blank to represent CCT and CRI.	

[3] (1) Can be any number to represent wattage.
    (2) Can be any number to represent for function commercial purpose.
    (3)Can be any number, letter, blank to represent emission angle.
    (4) Can be any number, letter or blank to represent CRI and CCT.
    (5) Can be any number, letter or blank to represent input voltage.
    (6) May be any number, letter or blank to represent designate fixture color.	

[1] A  - Lamp power
    B  - Light tube type: T4, T5, T6, T7, T8, T9, T10, T11, T12
    C  - CRI and color temperature with 3 numbers
    F  - Tube length
    G  - Tube type with any of the letters
    H  - Tube type with any of the letters or without
    SS - Tube type is safe shield

[1] (1) Indicates length				
        S – 2 feet				
        M – 4 feet				
    (2) Indicates beam angle				
        N  – Narrow (30°)				
        M  – Medium (60°)				
        WW – Widest (110° with frosted diffusor, 130° with clear diffusor)				
    (3) Indicates color temperature (CCT)				
        50 – 5000K				
        40 – 4000K				
        30 – 3000K				
    (4) Indicates diffusor transparency				
        F – Frosted				
        C – Clear				
    (5) Indicates voltage				
        No letter – Universal, 100-277V				
        H         – High Voltage, 300-480V				
    (6) Indicates number of power cords coming out of luminaire				
        No letter – Standard: one cable coming out of one end				
        Y         – Two cables, one coming out of each end

[1] (1) Indicates length of unit in inches.
    (2) With one or more of the following optional suffixes:
        B   - denotes Bloomington recessed pans
        N   - denotes narrow pan configuration
        R   - denotes faceted angles
        XXX - denotes numeric code indicating voltage
[6] Unit has not been performance tested for the storage of potentially hazardous foods.

[1] (1) Represents wattages: 100, 150, 230, 280, 300
    (2) Represents input voltages: blank for 100-277VAC, H for 277-480VAC
    (3) Represents CCT.: 3 for 3000K, 4 for 4000K, 5 for 5000K, 6 for 5700K

[2] (1)  Represents wattages: 150.
    (2)  Represents CCT:
         3 for 3000K
         4 for 4000K
         5 for 5000K
         6 for 5700K
    (3)  Represents Pendant
    (4)  Represents WHITE

[8] Additional suffixes may include:
    PG - Paint grip body
    SS - Stainless steel body

[8] Additional suffixes may include:
    PG - Paint grip body
    SS - Stainless steel body

[8] Additional suffixes may include:
    PG - Paint grip body
    SS - Stainless steel body

[8] Additional suffixes may include:
    PG - Paint grip body
    SS - Stainless steel body

[16] Prefix D - Doors are included with units
     Prefix O - Units have an open base

[18] May include the following suffixes:
     BL - Bullet-type heat lamps
     FL - Fluorescent lamps
     HT - Calrod heat rods
     N  - Incandescent

[8] Products may include up to an 8 digit suffix consisting of letters or numbers that may
    be separated by dashes or spaces. This suffix may include alternate or optional features
    that have been previously accepted by NSF and/or it may specify how a product is
    packaged or shipped.
    
[21] With or without one of the following suffixes: -18/3, -18/4, -16/3, -16/4, -14/3, -14/4.
[22] With or without suffixes -A, -AW, -SD, -US, -WB.
[23] Suffix LL or LLL indicates length.

[8] Products may include up to an 8 digit suffix consisting of letters or numbers that may
    be separated by dashes or spaces. This suffix may include alternate or optional features
    that have been previously accepted by NSF and/or it may specify how a product is
    packaged or shipped.
    
[81] * Indicates finish
       BL - Black epoxy
       CE - Clear epoxy over zinc
       CS - Chrome silver epoxy
       E  - Green epoxy with antimicrobial: Not tested by NSF for efficacy at limiting
            the spread of bacteria.
       R  - Red epoxy
       S  - Stainless steel
       V  - Gray pewter epoxy
       VG - Value green epoxy
       W  - White epoxy

[1] Could be in different color temperature.

[1] (1) Can be HB1, 2, HB2, 3 denotes Eiko product code
    (2) Can be 2, 4, 5, 8 denotes the luminaire size
    (3) Can be any alphanumerical characters denotes input power
    (4) May be G or blank denotes the Input power adjustable or unadjustable
    (5) May be S or 4 or 5. S: denotes 3 LED Colour
        Temperature can be set 4 - 4000K; 5 - 5000K
    (6) Can be any alphanumerical character or blank denotes rated input voltage
        1 - 120-277Vac, 2 - 347-480Vac, 3 - 120-347Vac, 4 - 347Vac

[1] (1) Indicates wattage from 00 to 99
    (2) T4, T5, T6, T7, T8, T9, T10, T11, T12 where the number indicates the size of the
    light tube
    (3) Indicates the lamp type or shape with L or U or blank
    (4) Indicates the tube length in inch
    (5) Any digits or letters represent color temperature 
    (6) Indicates the series maybe numbers or letter
[2] (1) Indicates wattage from 00 to 99
    (2) T8, T8F, T5HO, T5HE where the number indicates the size of the light tube.
    (3) Indicate the diffuser type, maybe P or blank
    (4) Indicates the lamp type, length or shape with number or letter.
    (5) Indicates the CRI and color temperature with 3 numbers
    (6) - Indicates appearance or structure, maybe any letters or blank.
    (7) - Indicates the series maybe numbers or letters.

[1] (1) indicates wattage	
    (2) indicates color temperature 27, 30, 35, 40, 50, 65 for example 30 - 3000K	

[1] Designed for use with bottled, canned, or prepackaged food only.
[2] (1) Length of luminaire in feet, 2 to 10.
    (2) Numeric value representing LED color temperature, 30 to 85, utilizing the first 
        two numerical digits of 3000K through 8500K.
    (3) Numerical value to represent LED density per foot
    (4) One to four alpha characters representing mounting option, including:
        N    - Tape
        NM   - End
        NP   - Pivot Mount
        NA   - Magnet
        OM   - Over molded (end cap)
        PA   - Pivot Magnet
        PM   - Pivot Magnet
        SNAP - Snap on configuration
    (5) Letter "C" to represent models with daisy chain connections
    (6) Suffix noting A-Z for CRI, LED Binning.
[3] Models will contain one of the following suffixes denoting color temperature 
    (1) 2750K, 3000K, 3500K, 4200K, 5100K, 6500K
[4] Models may contain the following suffixes:
    HV - High voltage
    LV - Low voltage
[5] (1) Length of luminaire in feet, 2 to 10.
    (2) Numeric value representing LED color Temperature, 30 to 85, utilizing the first 
        two numerical digits of 3000K through 8500K.
    (3) Single alpha character representing chip manufacturer.
    (4) Numerical value to represent LED density per foot.
    (5) Suffix noting N for non-dimming or D for dimming.
[8] (1) Indicates size Length in feet
    (2) Indicates CDR – M indicates medium, H indicates High
    (3) Indicates CCT(K) – 2700, 3000, 3500, 4000, 5000
    (4) Indicates LED – 07A or 14A
    (5) Indicates Mount – NA – Magnet, NM – End, CM – Clip, TM – Tape
    (6) Indicates Lens – D – Diffused, C – Clear
    (7) Indicates Cord – D – Daisy Chain, S – STD 72” Zip Cord, F – Female Connector
    (8) Indicates Daisy Chain Cord Length:
        02 = 2”
        03 = 3”	
        04 = 4”	
        05 = 5”	
        06 = 6”
        07 = 7”
        08 = 8”
        09 = 9”
        10 = 10”
        11 = 11”
        12 = 12”	

[3] Models will contain one of the following suffixes denoting color temperature 
    (1) 2750K, 3000K, 3500K, 4200K, 5100K, 6500K

[1] (1) Can be any alphanumerical characters denotes “DIM” e.g. DIM10.
    (2) can be any letter to represent input voltage, like MVOLT means 120-277V, etc.
    (3) Can be any alphanumerical characters denotes “CCT” e.g. 35K/40K/50K.
    (4) is a number range from 0-100 representing color rendering index. 
    (5) Can be any letters to represent luminaire with emergency unit, e.g. O-EMG-LED-9W, or
    blank to represent luminaire without emergency unit.
    (6) Can be any two letters to represent luminaire with sensor or blank to represent
    luminaire without sensor.

[1] (1) Followed by U,R,D to represent model type  
    (2)Followed by 100W,150W,200W to represent power. 
    (3)Followed by 90 or 110 to represent beam angle.   
    (4)Followed by 30, 35, 40, 45, 50, 57, 65 to represent CCT.
[2] (1) Followed by 7 or 8 to represent power.
        7 - 100W, 120W and 150W selectable
        8 - 200W, 240W and 300W selectable
    (2) Followed by BK or WH to represent the color of the fixture.
        BK - Black
        WH - White
    (3) Followed by 85 or 110  to represent  emission angle.
    (4) Followed by three numbers  to represent luminous efficiency.
[3] (1) Can be any number as part of the unique model number
    (2) Can be -MS, -PIR, -BT to indicate Microwave Sensor,
        PIR Motion sensor, motion sensor with BlueTooth, or
        blank to indicate without Motion Sensor
    (3) Can be 30K, 35K, 40K, 45K, 50K, 57K, or 65K to indicate
        color temperature

[1] (1) Followed by 120M, 347 or 120M/347 to represent input voltage
    (2) Followed by 30K, 35K, 40K or 50K to represent the CCT 3000K-5000K

[4] NSF Certified models begin with production date code 07/15.
[5] (9) Indicates length in feet 
        2 - 2 feet 
        4 - 4 feet 
        8 - 8 feet
    (10) Indicates number of lamps				
         L1 - 1 Lamp			
         L2 - 2 Lamps 			
         L3 - 3 Lamps 			
         L4 - 4 Lamps 			
         L5 - 5 Lamps 			
         L6 - 6 Lamps 		
    (27) Indicates size of LED lamp
          5 - T5 size
          8 - T8 size	
    (11) Indicates color temperature CCT (lighting characteristic unique to LED)		
         C4 - 4000K			
         C5 - 5000K
          Blank - None
    (12) Indicates options				
         A x -  Power Cord A, A1, A2 or A3	
          B - Basic Specular Reflector		
         C  - Clear plastic latches
          D - Dual End Power			
         F  - One 1/2" water resistant hub			
         G  - Two 1/2" water resistant hubs			
         H  - One 3/4" water resistant hub			
         I  - Two 3/4" water resistant hubs			
         K  - 3-Port luminaire disconnect			
         L  - 2-Port luminaire disconnect			
         M - Fixture Mounting Hardware (Not NSF Compliant)
         M1 - Fixture Mounting Hardware (NSF compliant)
         M2 - Fixture Mounting Hardware (NSF compliant)			
         O  - Wire lamp guard			
         Px - Diffuser P, P1, P2 or P3			
         Rx - Occupancy Sensor R, R1, R2, R3, R4, R5 or R6
          S  - Stainless steel latches			
         T  - Tamper resistant screws			
         Yx - Surface Mount Bracket Y, Y1, Y2 or Y3			
         Z  - Bulk packaging

[4] NSF Certified models begin with production date code 07/15.
[6] (13) Indicates length in feet  
         4 - 4 feet			
    (14) Indicates number of lamps				
         L4 - 4 Lamp			
         L6 - 6 Lamps 
    (28) Indicates size of LED lamp
         5 - T5 size	
         8 - T8 size				
    (15) Indicates color temperature CCT (lighting characteristic unique to LED)		 
         C4 - 4000K			
         C5 - 5000K
         Blank - None			
    (16) Indicates options				
         Ax - Power Cord A, A1, A2 or A3
          D - Dual End Power			
         G  - Two 1/2" water resistant hubs			
         I  - Two 3/4" water resistant hubs
         K - 3-Port Luminaire Disconnect			
         L  - Luminaire disconnect
         N - Specular Reflector			
         O  - Wire lamp guard
         Q - Clear Diffuser			
         P  - Ribbed frosted diffuser			
         Rx - Occupancy sensor R1, R2, R3, R4, R5, or R6			
         T  - Tamper resistant screws			
         V  - V-Hooks for chain			
         X  - Two circuit fixture
         Z - Bulk Packaging

[4] NSF Certified models begin with production date code 07/15.
[7] (17) Indicates length in feet 
         2 - 2 feet 
         4 - 4 feet 
         8 - 8 feet 				
    (18) Indicates style of fixture				
         S - Standard			
         P - Parking garage			
    (19) Indicates color temperature CCT (lighting characteristic unique to LED)				
         30 - 3000K			
         35 - 3500K			
         41 - 4000K
         50 - 5000K			
    (20) Indicates total system wattage (2 or 3-digit number)				
    (21) Indicates options				
         Ax  - Power Cord A, A1, A2 or A3	
         B - Basic Specular Reflector		
         C  - Clear plastic latches			
         Ex - Emergency Backup Driver E, E1 or E2		
         F  - One 1/2" water resistant hub			
         G  - Two 1/2" water resistant hubs			
         H  - One 3/4" water resistant hub			
         K  - 3-Port luminaire disconnect			
         L  - 2-Port luminaire disconnect			
         M - Fixture Mounting Hardware (Not NSF Compliant)
        M1 - Fixture Mounting Hardware (NSF compliant)
         M2 - Fixture Mounting Hardware (NSF compliant)
         Px - Diffuser P, P1, P2 or P3		
         Rx - Occupancy Sensor R, R1, R2, R3, R4, R5 or R6		
         S  - Stainless steel latches			
         T  - Tamper resistant screws			
         Yx - Surface Mount Bracket Y, Y1, Y2 or Y3			
         Z  - Bulk packaging

[4] NSF Certified models begin with production date code 07/15.
[8] (22) Indicates length in feet 
         4 - 4 feet				
    (23) Indicates style of fixture				
         S - Standard			
         P - Parking garage			
    (24) Indicates color temperature CCT (lighting characteristic unique to LED)
         30 - 3000K			
         35 - 3500K			
         41 - 4000K			
         50 - 5000K			
    (25) Indicates total system wattage (2 or 3-digit number)				
    (26) Indicates options				
         Ax - Power Cord A, A1, A2 or A3		
         E  - Emergency backup driver			
         F  - One 1/2" water resistant hub			
         G  - Two 1/2" water resistant hubs			
         H  - One 3/4" water resistant hub
         K - 3-Port Luminaire Disconnect			
         L  - Luminaire disconnect	
         Q - Clear Diffuser		
         Rx - Occupancy Sensor R, R1, R2, R3, R4, R5 or R6 			
         T  - Tamper resistant screws			
         V  - V-Hooks for chain
        X - Two Circuit Fixture
        Z - Bulk Packaging	

[1] Where XX can be any digitals to represent temperature color, like ‘30’ means 3000K.

[1] (1) For different size, 2=2ft, 4=4ft, 8=8ft.....;
    (2) Can be any letter or blank  for commercial use, eg. OS = Occupancy Sensor, EM =
    Emergency Battery Backup

[1] (1) Can be may be 5, 5P, HB5.
    (2) Can be 2, 4, 5, 8, denotes the luminaire size.
    (3) Can be 2, 3, 4, denotes led strip of the fixture.  
    (4) Can be M or blank, denotes the Input power adjustable or unadjustable ; "M" - 
        denotes the Input power adjustable; "blank" - power unadjustable.
    (5) Can be any numbers, denotes input power.
    (6) Can be 4, 5, C; 4 - 4000K; 5 - 5000K; C - 3cct selectable.
    (7) Can be F, denotes lens type.
[2] (1) Can be may be 5, 5P, HB5 or other any alphanumerical character and number, denotes 
        Etlin product code;
    (2) Can be 2, 4, 5, 8 denotes the luminaire size;
    (3) Can be M or blank denotes the Input power adjustable or unadjustable ; “M”- denotes 
        the Input power adjustable; “blank”- power unadjustable;
    (4) Can be any any numbers denotes input Power;
    (5) Can be 4, 5, C; 4 - 4000K; 5 - 5000K; C - 3cct selectable
    (6) Can be any alphanumerical character denotes the type of diffuser.

[1] (1) Indicates voltage:
        024 (24VAC/DC)
        120-240 (120-240VAC)
    (2) Indicates color:
        A - Amber
        B - Blue
        C - Clear
        G - Green
        R - Red

[1] The wattage will be 50W, 80W, 100W, 120W, 150W.
[2] (1) Can be any numbers denote the color temperature.
    (2) Can be any numbers denote the beam angle. 
[3] (1) Can be any alphanumerical character, denotes color temperature of LED. 	
    (2) Designates Mounting Means
        D – Ring Pendant
        G – Pole Mounted	
    (3) Designates Sensor
        S2    – With sensor
        Blank – Without sensor
    (4) Designates Driver type
        I – Isolated
        C – Non-Isolated	
    (5) Designates Light Efficiency
        A – Hight Light Efficiency
        B – Normal Light Efficiency
    (6)Can be any alphanumerical character, denotes beam angle
[4] Designates luminaire wattage: 80w, 100w, 125w, 150w, 185w, 200w
    The dimming will be 1-10V dimming or non dimming. 
    DLC type will be Premium or standard.
[5] (1) Can be any alphanumerical character, denotes color temperature of LED.'
    (2) Can be any alphanumerical character, denotes beam angle of luminaires.
    (3) Input Voltage can be blank or H, blank means 100-277V, H means 277-480V.
[6] The wattage will be 80W, 100W, 120W, 150W. 
    The dimming will be 1-10V dimming or non dimming.
    DLC type will be Premium.

[2] NSF certified production beginning 11/18/2013.

[1] Product from this facility will bear the letters WT.

[1] (1) Luminaire’s length suffix: Can be any number between 300 to 2400.
    (2) Input Power: Can be any number between 010 to 420.
    (3) Dimmer Function: “D” means suitable for dimmer, “N” means non-suitable for dimmer.
    (4) Diffuser Type: “C” means Clear Diffuser,  “F” means Frost Diffuser.
    (5) Input Voltage Suffix: Can be “L”, “H”, “U”.
    (6) Color Temperature Suffix:
        XXK - where "XX” is replaced by any two-digit numbers.
    (7) LED SMD Package Quantity Suffix: Can be any number.
    (8) LED SMD Package Size/Type Suffix: Can be “B”, “C", “D”, “E”, “H”.
    (9) LED  PWB layout: Can be any number.
    (10) LED Driver Suffix: Can be any number.
    (11) DLC Version Suffix:
         Blank: Standard Version
         P: Premium Version
    (12) Fixture Color: “W” means White; Blank means Aluminum Color. 
[2] The housing will be with or without coating.

[1] (1) Luminaire’s length suffix: Can be any number between 300 to 2400.
    (2) Input Power: Can be any number between 010 to 420.
    (3) Dimmer Function: “D” means suitable for dimmer, “N” means non-suitable for dimmer.
    (4) Diffuser Type: “C” means Clear Diffuser,  “F” means Frost Diffuser.
    (5) Input Voltage Suffix: Can be “L”, “H”, “U”.
    (6) Color Temperature Suffix:
        XXK - where "XX” is replaced by any two-digit numbers.
    (7) LED SMD Package Quantity Suffix: Can be any number.
    (8) LED SMD Package Size/Type Suffix: Can be “B”, “C", “D”, “E”, “H”.
    (9) LED  PWB layout: Can be any number.
    (10) LED Driver Suffix: Can be any number.
    (11) DLC Version Suffix:
         Blank: Standard Version
         P: Premium Version
    (12) Fixture Color: “W” means White; Blank means Aluminum Color. 
[3] The housing and end cap will be with or without coating.
[4] (1) Luminaire’s length suffix: Can be ”600”, ”900”, ”1200”, ”1500”, ”1800” or "2400" .
    (2) Input Power: Can be any number between 020 to 400.
    (3) Dimmer Function: “D” means suitable for dimmer; “N” means not-suitable for dimmer,
        sensor as optional.
    (4) Diffuser Type: “C” means Clear Diffuser, “F” means Frost Diffuser.
    (5) Input Voltage Suffix:
        “L” for LED driver with input voltage 120-277 Vac or 120-240/277 Vac
        “H” for LED driver with input voltage 200-347 Vac
        “C” for LED driver with input voltage 120-347 Vac
        “U” for LED driver with input voltage 200-480 Vac
    (6) Color Temperature Suffix: XXK - where "XX” is replaced by any two-digit numbers.
    (7) LED SMD Package Quantity Suffix: Can be any number between “048” to “4224”.
    (8) LED SMD Package Size/Type Suffix:
        “B” for 5630 LED;
        “C” for 2835 LED;
        “D” for 3030 LED;
        “E” for 3535 LED;
        “H” for 5050 LED.
    (9) LED PWB Layout:
        “3” for metal base LED PWB operating voltage under 60 V
        “6” for polymeric base LED PWB operating voltage above 60 V
    (10) LED Driver Suffix: Can be any number represents using different LED driver.

[1] (1) Can be 22, 24, 14, representing size.
        22 - 2x2
        24 - 2x4
        14 - 1x4
    (2) Can be any a letter from “A” to “Z” representing lighting effect
    (3) Can be two characters representing different input power
    (4) Can be two characters representing different CCT
    (5) Can be one characters representing Lampshade different colors
    (6) Can be two characters representing different type LED Driver
    (7) Can be "H" or "L"  representing different input voltage
    (8) Can be  A, 0 or blank, A denotes with emergency driver, 0 or blank denotes without
    emergency driver.
    (9) Can be  A, 0 or blank, A denotes with sensor, 0 or blank denotes without sensor.
    (10) Can be one characters representing different CRI
    (11) Can be one characters representing different Installation method:
         E - embedded mounted
         S - surface mounted
    

[2] (1) Numerical digit 10 - 58 to indicate length of the product in inches
    (2) Numerical two digits to indicate the Kelvin temperature
    (3) Color of the lens/cover
        CL - Clear
        FR - Frost
    (4) High and low output
        1 - High
        2 - Low
    (5) Special notice, normally 0000

[1] NSF approved products starting from June 2012.
[2] (1) 1 digit code for order key, can be any number from 0 to 9 or letter from A to Z.
    (2) 2 digit code for product type:
        CL - Canopy Light   
        CM - Canopy + Magnet 
        CT - Canopy Tube Light
        GT - General Light
        HT - High Power Tube Light
        LT - Low Power Tube Light
        MT - Mid Power Tube Light
        SL - Shelf Light
        SM - Shelf +Magnet
        ST - Shelf Tube Light
    (3) 3 digit code for length in inches.
    (4) 3 digit code for number of Led.
    (5) 2 digit code for LED source manufacturer:
        CE - Cree XP-E 
        CM - Cree XM-L 
        LG - LG 
        LO - Liteon 
        LT - Lextar 
        OR - OSRAM 
        PL - Philips Lumiled 
    (6) 1 digit code for color temperature:
        1 - 6500K
        2 - 5500K
        3 - 5000K
        4 - 4500K
        5 - 4000K
        6 - 3500K
        7 - 3000K
    (7) Brackets are optional accessories. They may or may not be included. 
        B1 - The pins of the plastic end cap are parallel to the PCB. 
        B2 - The pins of the plastic end cap are perpendicular to the PCB 
        C1 - Clear lens, Pins of the plastic end cap are parallel to the PCB. 
        C2 - Clear lens, Pins of the plastic end cap are Perpendicular to the PCB. 
        CB - For black wire with black connector 
        CW - For white wire with white connector 
        F1 - Frosted lens, Pins of the plastic end cap are parallel to the PCB. 
        F2 - Frosted lens, Pins of the plastic end cap are perpendicular to the PCB. 
        OB - For black wire with no connector

[1] NSF approved products starting from June 2012.
[3] (1) 1 digit code for order key, can be any number from 0 to 9 or letter from A to Z.
    (2) 2 digit code for product type:
        DM - Dimming
        EL - End light
        LP - Low profile
        ZZ - Zero zone
    (3) 3 digit code for length in inches.
    (4) 3 digit code for number of Led.
    (5) 2 digit code for LED source manufacturer:
        CE - Cree XP-E
        CM - Cree XM-L
        LG - LG
        LM - Philips Lumiled
        LT - Lextar
        OR - OSRAM
    (6) 1 digit code for color temperature:
        1 - 6500K
        2 - 5500K
        3 - 5000K
        4 - 4500K
        5 - 4000K
        6 - 3500K
        7 - 3000K

[4] NSF approved products starting from Oct  2012.
[5] (1) Order Key can be any number 0 to 9 or letter A to Z
    (2) Length in inch(ex:472=47.2")
    (3) The number of led
    (4) Light source manufacturer:
        CE - Cree XP-E
        CM - Cree XM-L
        LG - LG
        LM - Philips Lumiled
        LT - Lextar
        OR - OSRAM
    (5) Color temperature options:
        1 - 6500K
        2 - 5500K
        3 - 5000K
        4 - 4500K
        5 - 4000K
        6 - 3500K
        7 - 3000K

[2] (1)  Indicates LUMENS 
         L10, L15, L20, L30, L40, L50, L60
    (2)  Indicates CRI
         8, 9
    (3)  Indicates CCT
         27, 30, 35, 40, 50, L23, L24,TW
    (4)  Indicates OPTIONS which do not affect design or materials
         A, ATHN, ATH, D01, DRW/4673, EM/7W, EM/10W, F, RF/DA, WN, 6CPI/5-15P, 10CPI/5-15P
    (5)  Indicates DRIVER
         DIM, DIM1, DIM LINE, DMX, LTE LINE, LDE1, VRF/DBI/LDE1, FCJS/DIM,
         FCJS/DIM1, ELDO SOLOB, ELDO SOLOB DALI, ELDO ECO1, ELDO ECO1 DALI
    (6)  Indicates VOLTAGE
         UNV, 120, 277, 347
    (7)  Indicates TRIM TYPE
         L, R
    (8)  Indicates DISTRIBUTION
         W, M, N
    (9)  Indicates FLANGE TYPE
         OF
    (10) Indicates REFLECTOR FINISH, texture powder paint
         WH, BL, MB
    (11) Indicates TRIM OPTIONS which do not affect design or materials
         AD, PD
    (12) Indicates MOUNTING TYPE wihch do not affect design or materials
         N, I
    (13) Indicates MOUNTING HARDWARE which do not affect design or materials
         F1, BA1, CA1

[1] Certified for Food Zone (Non-contact), Splash Zone, and Non-food Zone.

[1] (1) Means CCT, example: 35 - 3500K, 40 - 4000K, 50 - 5000K

[1] (1) LED LAMP  length , from 06 to 96	
    (2) CRI and CCT, Numbers or letter combination indicate CRI and CCT	
    (3) Company internal code,from 00 to 99	
    (4) Vertical or horizontal installation of lights or blank; denoted by V,H or blank	
    (5) Letter or Letter combination or blank