NSF Product and Service Listings

These NSF Official Listings are current as of Tuesday, September 29, 2020 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.

Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/PwsComponents/Listings.asp?PlantState=IL&PlantCountry=UNITED+STATES&



NSF/ANSI/CAN 61
Drinking Water System Components - Health Effects

NOTE: Unless otherwise indicated for Materials, Certification is only for the Water Contact Material shown in the Listing. Click here for a list of Abbreviations used in these Listings. Click here for the definitions of Water Contact Temperatures denoted in these Listings.


 
Action Technology 
10610 State Highway 10
Clinton, IL 61727 
United States 
217-935-1066


Facility : Clinton, IL

Pipes and Related Products

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Tubing/Hose
AT Alpha PE Series .17" - .5" D. HOT PE



 
AdEdge Technologies, Inc. 
5152 Belle Wood Court
Suites A 
Burford, GA 30518 
United States 
678-835-0052


Facility : Quincy, IL

Process Media

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Oxidative Media
AD26 [1] CLD 23 MNDOX

[1] Certified for the following mesh sizes: 8 x 20, 20 x 40.

NOTE: Certified for water treatment plant applications.
      This product has not been evaluated for point of use applications.


 
Black Swan Manufacturing Co. 
4540 West Thomas Street
Chicago, IL 60651 
United States 
773-227-3700


Facility : Chicago, IL

Joining and Sealing Materials

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Sealants[G]
All Purpose Pipe Dope > = 1/2" C. HOT TS
Big Black >= 1/2" C. HOT TS
Big Blue >= 1/2" C. HOT TS
Big White > = 1/2" C. HOT TS
Swan Seal >= 1/2" C. HOT TS

[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    



 
Cerro Flow Products LLC 
Illinois Route 3
Sauget, IL 62201 
United States 
618-337-6000


Facility : Sauget, IL

Pipes and Related Products

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Tubing/Hose
Cerro Type[1] [2] [G] 1/4" - 8" C. HOT CU
Seamless Copper Water Tubing[1] [2] [G] 1/4" - 8" C. HOT CU

[1] Copper tube (Alloy C12200) is Certified by NSF to NSF/ANSI/CAN 61 for use in drinking
    water supplies of pH 6.5 and above.  Drinking water supplies that are less than pH 6.5
    may require corrosion control to limit leaching of copper into the drinking water.
[2] This product has not been evaluated for use in water main transmission piping but has
    been evaluated for use as water distribution piping in buildings.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
      documentation shipped with the product are Certified.


 
Core Pipe Products, Inc. 
170 Tubeway Drive
Carol Stream, IL 60188 
United States 
630-690-7000
Visit this company's website


Facility : Carol Stream, IL

Pipes and Related Products

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Fittings[G]
Picor 304/304L Stainless Steel Angle Rings 1/2" - 144" CLD 23 SS
Picor 304/304L Stainless Steel Caps 1/2" - 144" CLD 23 SS
Picor 304/304L Stainless Steel Concentric Reducers 1/2" - 144" CLD 23 SS
Picor 304/304L Stainless Steel Couplings 1/2" - 144" CLD 23 SS
Picor 304/304L Stainless Steel Eccentric Reducers 1/2" - 144" CLD 23 SS
Picor 304/304L Stainless Steel Fittings 1/2" - 144" CLD 23 SS
Picor 304/304L Stainless Steel Flanges 1/2" - 144" CLD 23 SS
Picor 304/304L Stainless Steel LR Elbows 1/2" - 144" CLD 23 SS
Picor 304/304L Stainless Steel Reducing Tees 1/2" - 144" CLD 23 SS
Picor 304/304L Stainless Steel SR Elbows 1/2" - 144" CLD 23 SS
Picor 304/304L Stainless Steel Stub Ends 1/2" - 144" CLD 23 SS
Picor 304/304L Stainless Steel Tees 1/2" - 144" CLD 23 SS
Picor 316/316L Stainless Steel Angle Rings 1/2" - 144" CLD 23 SS
Picor 316/316L Stainless Steel Caps 1/2" - 144" CLD 23 SS
Picor 316/316L Stainless Steel Concentric Reducers 1/2" - 144" CLD 23 SS
Picor 316/316L Stainless Steel Couplings 1/2" - 144" CLD 23 SS
Picor 316/316L Stainless Steel Eccentric Reducers 1/2" - 144" CLD 23 SS
Picor 316/316L Stainless Steel Fittings 1/2" - 144" CLD 23 SS
Picor 316/316L Stainless Steel Flanges 1/2" - 144" CLD 23 SS
Picor 316/316L Stainless Steel LR Elbows 1/2" - 144" CLD 23 SS
Picor 316/316L Stainless Steel Reducing Tees 1/2" - 144" CLD 23 SS
Picor 316/316L Stainless Steel SR Elbows 1/2" - 144" CLD 23 SS
Picor 316/316L Stainless Steel Stub Ends 1/2" - 144" CLD 23 SS
Picor 316/316L Stainless Steel Tees 1/2" - 144" CLD 23 SS
Tube Line 304/304L Stainless Steel Flanges 1/2" - 144" CLD 23 SS
Tube Line 316/316L Stainless Steel Flanges 1/2" - 144" CLD 23 SS

[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Pipe Spools[1] [G]
Core Pipe 304/304L Stainless Steel Pipe Spools 1/2" - 144" CLD 23 SS
Core Pipe 316/316L Stainless Steel Pipe Spools 1/2" - 144" CLD 23 SS
Picor 304/304L Stainless Steel Pipe Spools 1/2" - 144" CLD 23 SS
Picor 316/316L Stainless Steel Pipe Spools 1/2" - 144" CLD 23 SS
Tube Line 304/304L Stainless Steel Pipe Spools 1/2" - 144" CLD 23 SS
Tube Line 316/316L Stainless Steel Pipe Spools 1/2" - 144" CLD 23 SS

[1] Certified for 304, 304L, 316, and 316L stainless steel.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    



 
CST Industries Inc. 
903 East 104th Street
Suite 900 
Kansas City, MO 64131 
United States 
913-621-3700
Visit this company's website


Facility : DeKalb, IL

Protective (Barrier) Materials

    Water Water
  Water Contact Contact Contact
Trade Designation Size Restriction Temp Material

Storage Tanks/Reservoirs
Aquastore Water Standpipes & Reservoirs[1] >= 17650 gal. CLD 23 MLTPL

[1] Listed Storage Tanks/Reservoirs include galvanized polyethylene, polypropylene, or
    polyphenylene oxide appurtenances; polyurethane (or alternate rubber) sealer, fastener
    coverings; gaskets; and magnesium or zinc anodes. Interiors and floors can be composed
    of: Vitreous coated interior with vitreous coated floor or concrete floor coated with
    NSF Certified coating, or epoxy coated interior with epoxy coated floor or concrete
    floor coated with NSF Certified coating, or stainless steel interior with stainless
    steel floor or concrete floor coated with NSF Certified coating. All NSF Certified
    coatings must be Listed for tanks at least 17,650 gallons, and application must occur
    according to Certified specifications.



 
Deer Creek Flange Pipe Co. 
200 East Locust Street
Deer Creek, IL 61733 
United States 
309-447-6231


Facility : Deer Creek, IL

Pipes and Related Products

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Ductile Iron Pipe
Flanged Ductile Iron Pipe 3" - 48" CLD 23 CMNT
Grooved - Shouldered Joint Pipe 3" - 48" CLD 23 CMNT



 
Dixon Brass A Division of Dixon Valve & Coupling Company, LLC 
40 Chestnut Avenue
Westmont, IL 60559 
United States 
630-323-4442
Visit this company's website


Facility : Westmont, IL

Pipes and Related Products

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Fittings[G]
1020302CLF Male Hose Barb - NPTF 3/16" x 1/8" CLD 23 MLTPL
1020402CLF Male Hose Barb - NPTF 1/4" x 1/8" CLD 23 MLTPL
1020404CLF Male Hose Barb - NPTF 1/4" x 1/4" CLD 23 MLTPL
1020502CLF Male Hose Barb - NPTF 5/16" x 1/8" CLD 23 MLTPL
1020504CLF Male Hose Barb - NPTF 5/16" x 1/4" CLD 23 MLTPL
1020602CLF Male Hose Barb - NPTF 3/8" x 1/8" CLD 23 MLTPL
1020604CLF Male Hose Barb - NPTF 3/8" x 1/4" CLD 23 MLTPL
1020606CLF Male Hose Barb - NPTF 3/8" x 3/8" CLD 23 MLTPL
1020608CLF Male Hose Barb - NPTF 3/8" x 1/2" CLD 23 MLTPL
1020804CLF Male Hose Barb - NPTF 1/2" x 1/4" CLD 23 MLTPL
1020806CLF Male Hose Barb - NPTF 1/2" x 3/8" CLD 23 MLTPL
1020808CLF Male Hose Barb - NPTF 1/2" x 1/2" CLD 23 MLTPL
1021008CLF Male Hose Barb - NPTF 5/8" x 1/2" CLD 23 MLTPL
1021208CLF Male Hose Barb - NPTF 3/4" x 1/2" CLD 23 MLTPL
1021212CLF Male Hose Barb - NPTF 3/4" x 3/4" CLD 23 MLTPL
1040404CLF Female Hose Barb - Solid - NPTF 1/4" x 1/4" CLD 23 MLTPL
1040604CLF Female Hose Barb - Solid - NPTF 3/8" x 1/4" CLD 23 MLTPL
1040606CLF Female Hose Barb - Solid - NPTF 3/8" x 3/8" CLD 23 MLTPL
1040608CLF Female Hose Barb - Solid - NPTF 3/8" x 1/2" CLD 23 MLTPL
1040808CLF Female Hose Barb - Solid - NPTF 1/2 " x 1/2" CLD 23 MLTPL
1041616CLF Female Hose Barb - Solid - NPTF 1" x 1" CLD 23 MLTPL
1430407KLF Female Swivel Hose Barb - Dual Angle Seat ¼" x ¼" x 7/16"-20" CLD 23 MLTPL
1780404CLF Hose Splicer 1/4" x 1/4" CLD 23 MLTPL
1780606CLF Hose Splicer 3/8" x 3/8" CLD 23 MLTPL
1780808CLF Hose Splicer 1/2" x 1/2" CLD 23 MLTPL
2720402CLF "Lok-On" Male NPTF Hose Barb 1/4" x 1/8" CLD 23 MLTPL
2720404CLF "Lok-On" Male NPTF Hose Barb 1/4" x 1/4" CLD 23 MLTPL
2720604CLF "Lok-On" Male NPTF Hose Barb 3/8" x 1/4" CLD 23 MLTPL
2720606CLF "Lok-On" Male NPTF Hose Barb 3/8" x 3/8" CLD 23 MLTPL
2720806CLF "Lok-On" Male NPTF Hose Barb 1/2" x 3/8" CLD 23 MLTPL
2720808CLF "Lok-On" Male NPTF Hose Barb 1/2" x 1/2" CLD 23 MLTPL
3700202CLF Male Hex Nipple - NPTF 1/8" x 1/8" CLD 23 MLTPL
3700404CLF Male Hex Nipple - NPTF 1/4" x 1/4" CLD 23 MLTPL
3700606CLF Male Hex Nipple - NPTF 3/8" x 3/8" CLD 23 MLTPL
3700808CLF Male Hex Nipple - NPTF 1/2" x 1/2" CLD 23 MLTPL
3710202CLF Female Hex Coupling - NPTF 1/8" x 1/8" CLD 23 MLTPL
3710404CLF Female Hex Coupling - NPTF 1/4" x 1/4" CLD 23 MLTPL
3710606CLF Female Hex Coupling - NPTF 3/8" x 3/8" CLD 23 MLTPL
3710808CLF Female Hex Coupling - NPTF 1/2" x 1/2" CLD 23 MLTPL
3730402CLF Reducer Bushing - NPTF 1/4" x 1/8" CLD 23 MLTPL
3730604CLF Reducer Bushing - NPTF 3/8" x 1/4" CLD 23 MLTPL
3730804CLF Reducer Bushing -NPTF 1/2" x 1/4" CLD 23 MLTPL
3730806CLF Reducer Bushing - NPTF 1/2" x 3/8" CLD 23 MLTPL
3731208CLF Reducer Bushing - NPTF 3/4" x 1/2" CLD 23 MLTPL
3750402CLF Adapter - NPTF 1/4" x 1/8" CLD 23 MLTPL
3750404CLF Adapter - NPTF 1/4" x 1/4" CLD 23 MLTPL
3750808CLF Adapter - NPTF 1/2" x 1/2" CLD 23 MLTPL
3751212CLF Adapter - NPTF 3/4" x 3/4" CLD 23 MLTPL
3770806CLF Reducer Coupler - NPTF 1/2" x 3/8" CLD 23 MLTPL
3771208CLF Reducer Coupler - NPTF 3/4" x 1/2" CLD 23 MLTPL
5021208CLF Female Hose x Female Pipe NPTF Swivel 3/4" x 1/2" CLD 23 MLTPL
5021212CLF Female Hose x Female Pipe NPTF Swivel 3/4" x 3/4" CLD 23 MLTPL
5061212CLF Female Hose x Female Hose Swivel 3/4" x 3/4" CLD 23 MLTPL
5071212CLF Male Hose x Female Pipe Adapter NPTF 3/4" x 3/4" CLD 23 MLTPL
5081208CLF Male Hose x Male Pipe Adapter NPTF 3/4" x 1/2" CLD 23 MLTPL
5091212CLF Male Hose x Male Hose x Female Pipe NPTF 3/4" x 3/4" x 1/2" CLD 23 MLTPL
5141212CLF Male Hose x Male Pipe x Female Pipe NPTF 3/4" x 3/4" x 1/2" CLD 23 MLTPL
5900812CLF Male Garden Hose 1/2" x 3/4" CLD 23 MLTPL
5901012CLF Male Garden Hose 5/8" x 3/4" CLD 23 MLTPL
5901212CLF Male Garden Hose 3/4" x 3/4" CLD 23 MLTPL
5901616CLF Male Garden Hose - NPSH 1" CLD 23 MLTPL
5910812CLF Female Garden Hose Swivel Fitting 1/2" x 3/4" CLD 23 MLTPL
5911012CLF Female Garden Hose Swivel Fitting 5/8" x 3/4" CLD 23 MLTPL
5911212CLF Female Garden Hose Swivel Fitting 3/4" x 3/4" CLD 23 MLTPL
5911212NLF Garden Hose Nut with Hex Knurl 3/4" CLD 23 MLTPL
5911616CLF Female Garden Hose Swivel Fitting - NPSH 1" CLD 23 MLTPL
5911616NLF Garden Hose Nut with Hex Knurl 1" CLD 23 MLTPL
5931212CLF Male Garden Hose - Long Shank 3/4" CLD 23 MLTPL
5941212CLF Female Garden Hose Swivel Fitting - Long Shank 3/4" CLD 23 MLTPL

[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    



 
Equistar Chemicals, LP 
One Houston Center
1221 McKinney Street 
Suite 700 
Houston, TX 77010 
United States 
713-309-7905
Visit this company's website


Facility : Morris, IL

Protective (Barrier) Materials

    Water Water
  Water Contact Contact Contact
Trade Designation Size Restriction Temp Material

Tank Material*
Petrothene GA652962 >= 5 gal. C. HOT PE
Microthene MP652962 >= 5 gal. C. HOT PE
Petrothene GA625962 >= 5 gal. C. HOT PE
Microthene MP625962 >= 5 gal. C. HOT PE
Petrothene GA635962 >= 5 gal. C. HOT PE
Microthene MP635962 >= 5 gal. C. HOT PE
Petrothene GA643962 >= 5 gal. C. HOT PE
Microthene MP643962 >= 5 gal. C. HOT PE

* All Listed products from this facility are NSF Certified, whether or not they bear the
  NSF Mark.



 
ERH Enterprises Inc. 
1810 South State Street
P.O. Box 337 
Westville, IL 61883 
United States 
800-734-3901 
217-267-2331


Facility : Westville, IL

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Miscellaneous Treatment Devices/Components
ERH Fine Bubble Aeration Vessel [1] CLD 23 MLTPL

[1] Certified for a minimum daily flow of 272,520 L.



 
GCP Applied Technologies Inc. 
62 Whittemore Avenue
Cambridge, MA 02140 
United States 
800-354-5414 
617-498-4555


Facility : Chicago, IL

Protective (Barrier) Materials

    Water Water
  Water Contact Contact Contact
Trade Designation Size Restriction Temp Material

Grinding Aid[1]
TAVERO LGA 1670 [2] CLD 23 CMNT

[1] Certified for a level of 600 grams per 1000 kilograms of cement.
[2] Certified for use in pipes 4" and greater and in tanks 200 gallons and greater.

NOTE: All Listed products from this facility are NSF Certified, whether or not they bear the
      NSF Mark.


 
Huntsman Holland B.V. 
10003 Woodloch Forest Drive
The Woodlands, TX 77380 
United States 
281-719-6000


Facility : Ringwood, IL

Potable Water Materials

    Water Water
    Contact Contact
Trade Designation End Use Temp Material

Potable Water Materials
IROGRAN A 85 P 4394 FCM P, F CLD 23 PUR
IROGRAN A 92 P 4637 H FCM P, F CLD 23 PUR



 
Just Manufacturing Company 
9233 King Street
Franklin Park, IL 60131 
United States 
847-678-5150


Facility : Franklin Park, IL

Mechanical Plumbing Devices

Trade Designation      

Drinking Fountain Bubblers
JCB-4SS Stainless Steel Bubbler[G]      
JSB-10[G]      
JSB10-VR[G]      

[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Faucets
JSFVR-5 Stainless Steel Faucet[G]      

[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    



 
La-Co Industries, Inc. 
1201 West Pratt Boulevard
Elk Grove Village, IL 60007-5746 
United States 
847-956-7600
Visit this company's website


Facility : Elk Grove Village, IL

Joining and Sealing Materials

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Thread Compounds[G]
Industrial Pipe Thread Paste - R >= 1/2" C. HOT TC
Leak-Tite Blue >= 1/2" C. HOT TC
Pipetite Stik >= 1/2" C. HOT TC
Slic-Tite Paste with PTFE >= 1" C. HOT TC
Slic-Tite Stick with PTFE >= 1" C. HOT TC
T-O-T Pipe Thread Compound >= 1/2" C. HOT TC

[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Brazing/Solders/Fluxes[G]
Regular Flux Paste >= 1/2" C. HOT FLX

[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Sealants[G]
Heat-Seal Stik® 2.0 sq. in./L C. HOT EPOXY

[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    



 
Lafarge North America 
6211 North Ann Arbor Road
Dundee, MI 48131 
United States 
734-529-4615


Facility : Chicago, IL

Protective (Barrier) Materials

    Water Water
  Water Contact Contact Contact
Trade Designation Size Restriction Temp Material

Cements[1] [2]
Grade 100 NewCem [3] CLD 23 CMNT
Grade 120 Ground Granulated Blast Furnace Slag [3] CLD 23 CMNT
NewCem [3] CLD 23 CMNT

[1] Certified for a level not to exceed 50% of cement by mass.
[2] All Listed products from this facility are NSF Certified, whether or not they bear the
    NSF Mark.
[3] Certified for pipes 4" and greater, tanks 200 gallons and greater.



 
Liquitech Inc. 
421 Eisenhower Lanes
Lombard, IL 60148 
United States 
800-635-7873 
630-693-0500
Visit this company's website


Facility : Lombard, IL

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Chemical Generators[1] [2] [3] [G]
QF7 4" D. HOT MLTPL
QF14 4" D. HOT MLTPL
QF42 3" D. HOT MLTPL
QF 23 4" D. HOT MLTPL
QF16 4" D. HOT MLTPL
QFW16 4" D. HOT MLTPL

[1] Certified for a minimum flow of 2,880 gallons per day.
[2] Certification is for health effects only and does not address the disinfection efficacy
    of the product.
[3] The finished drinking water shall be monitored per manufacturer's instructions and the
    units controlled to ensure that levels of copper do not exceed 0.8 mg/L, and the levels
    of silver do not exceed 0.08 mg/L.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    



 
Mill-Rose Clean-Fit Division 
7310 Corporate Boulevard
Mentor, OH 44060 
United States 
800-321-3598 
440-974-6730
Visit this company's website


Facility : Elk Grove Village, IL

Joining and Sealing Materials

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Thread Compounds[G]
Blue Monster Zero >= 1" C. HOT TC

[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    



 
Pentair Flow Technologies LLC 
293 Wright Street
Delavan, WI 53115 
United States 
888-782-7483 
262-728-7483
Visit this company's website


Facility : North Aurora, IL

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Pumps[1] [G]
Aurora Pump 3801 [2] CLD 23 MLTPL
Aurora Pump 3804 [2] CLD 23 MLTPL
Fairbanks Nijhuis Series 1620 [2] CLD 23 MLTPL
Fairbanks Nijhuis Series 1650 [2] CLD 23 MLTPL

[1] Only products bearing the NSF Mark on the product, product packaging, and/or
    documentation shipped with the product are Certified.
[2] Aurora Pump sizes (outlet size x inlet size x case bore/impeller size) / Fairbanks
    Nijhuis sizes
    1.25" x 1.5" x 7" / 1 1/4" -1621 & -1651
    1.25" x 1.5" x 9.5" / 1 1/4" - 1622 & -1652
    1.5" x 2" x 7" / 1 1/2" -1621 & -1651
    1.5" x 2" x 9.5" / 1 1/2" - 1624 & -1654
    1.5" x 2" x 11" / 1 1/2 " -1622 & -1652
    1.5" x 2" x 12" / 1 1/2" -1623 & -1653
    2" x 2.5" x 7" A / 2" -1621A  & -1651A
    2" x 2.5" x 9.5" / 2" -1622 & -1652
    2" x 3" x 11" / 2" -1623 & -1653
    2" x 3" x 13.5" / 2" -1624 & -1654
    2.5" x 3" x 7" / 2 1/2" -1621 & -1651
    2.5" x 3" x 9.5" / 2 1/2" -1622 & -1652
    2.5" x 3" x 13.5" / 2 1/2" -1623 & -1653
    3" x 4" x 7" / 3" -1621 & -1651
    3" x 4" x 9.5" / 3" -1622 & -1652
    3" x 4" x 11" / 3" -1623 & -1653
    3" x 4" x 13.5" / 3" -1624 & -1654
    4" x 5" x 7" A / 4" -1621A & -1651A
    4" x 5" x 9.5" / 4" -1622 & -1652
    4" x 5" x 11" A/ 4" -1623A & -1653A
    4" x 5" x 13.5" / 4" -1624 & -1654
    5" x 6" x 7" / 5" -1621 & -1651
    5" x 6" x 9.5" A/ 5" -1622A & -1652A
    5" x 6" x 11" / 5" -1623 & -1653
    5" x 6" x 13.5" / 5" -1624 & -1654
    6" x 8" x 9.5" / 6" -1621 & -1651
    6" x 8" x 11" A/ 6" -1622A & -1652A
    6" x 8" x 13.5" / 6" -1623 & -1653
    8" x 10" x 13.5" / 8" -1622 & -1652
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    



 
Prince Minerals, Inc. 
14 East 44tth Street 5th Floor
New York, NY 10017 
United States 
646-747-4200
Visit this company's website


Facility : Quincy, IL

Process Media

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Oxidative Media
Pyrolox™ [1] CLD 23 MNDOX

[1] Certified for the following US mesh sizes: 8 x 20, 20 x 40.  Certified for the following
    UK mesh sizes: 18/44.

NOTE: Certified for water treatment plant applications.
      This product has not been evaluated for point of use applications.


 
Pure Asphalt Company 
3455 West 31st Place
Chicago, IL 60623 
United States 
773-247-7030
Visit this company's website


Facility : Chicago, IL

Joining and Sealing Materials

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Lubricants
Pure Lube 400 >= 1/2" CLD 23 LUB
Pure Lube 500 >= 1/2" CLD 23 LUB



 
Sabic Innovative Plastics US LLC 
2500 CityWest Boulevard
#100 
Houston, TX 77042 
United States 
713-430-2300
Visit this company's website


Facility : Ottawa, IL

Potable Water Materials

    Water Water
    Contact Contact
Trade Designation End Use Temp Material

Potable Water Materials
Cycolac MG37EPX-GY4A087[1] A,F CLD 23 ABS
Cycolac MG37EPX-NA1000[1] A,F CLD 23 ABS
Cycolac® MG38N-NA1000[2] A CLD 23 ABS
Cycolac® MG47N-NA1000[1] A CLD 23 ABS

[1] Certified for a maximum surface area to volume ratio of 80 sq. in./L.
[2] Certified for a maximum surface area to volume ratio of 65 sq. in./L.

NOTE: All Listed products from this facility are NSF Certified, whether or not they bear the
      NSF Mark.


 
Saf-T-Lok International 
300 Eisenhower Lane North
Lombard, IL 60148 
United States 
630-495-2001


Facility : Lombard, IL

Joining and Sealing Materials

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Sealants
SAF-T-LOK 2T43[1] [2] C. HOT SLT
SAF-T-LOK I-TPS[1] >= 1/2" pipe C. HOT SLT
SAF-T-LOK R80[1] >= 1/2" pipe C. HOT SLT
SAF-T-LOK T42[1] [2] C. HOT SLT
SAF-T-LOK T43[1] [2] C. HOT SLT

[1] Product Certification does not include use of a primer.
[2] Certified for a maximum of 54 1/2" joints per residence (5 joints per Liter).



 
Sanchem, Inc. 
1600 South Canal Street
Chicago, IL 60616 
United States 
312-733-6100


Facility : Chicago, IL

Joining and Sealing Materials

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Lubricants
American Underwater Joint Lubricant >= 1/2" CLD 23 LUB
NO-OX-ID "A" SPECIAL >= 1/2" CLD 23 LUB
NO-OX-ID A >= 1/2" CLD 23 LUB
NO-OX-ID A SPECIAL WW >= 1/2" CLD 23 LUB
NO-OX-ID PWL 600 >= 1/2" CLD 23 LUB


Protective (Barrier) Materials

    Water Water
  Water Contact Contact Contact
Trade Designation Size Restriction Temp Material

Coatings - Tank
NO-OX-ID A[1] >= 10,000 gal. CLD 23 HC
NO-OX-ID "A" SPECIAL[1] >= 10,000 gal. CLD 23 HC
NO-OX-ID A SPECIAL WW[1] >= 10,000 gal. CLD 23 HC
NO-OX-ID PWL 600[1] >= 10,000 gal. CLD 23 HC

[1] Number of Coats:  1
    Maximum Field Use Dry Film Thickness (in mils):  20-30
    Final Cure Time and Temperature: 24 hours at 75°F



 
Sherwin-Williams Company 
101 Prospect Avenue
Cleveland, OH 44115 
United States 
773-821-3420


Facility : Moline, IL

Protective (Barrier) Materials

    Water Water
  Water Contact Contact Contact
Trade Designation Size Restriction Temp Material

Coatings - Pipe
CorroPipe® II PW Ultra[3] >= 48" D. HOT PUR
Corrocote II PW[1] >= 78" D. HOT PUR
Corrocote II PW (AM)[1] >= 78" D. HOT PUR
Corropipe II PW[2] >= 18" CLD 23 PUR
Corropipe II PW (AM)[2] >= 18" CLD 23 PUR

[1] Colors: Off-White, Medium Gray 
    Number of Coats: 1
    Sequence of Coats: Any combination of listed colors
    Maximum Field Use Dry Film Thickness (in mils): 80
    Maximum Thinner: None
    Final Cure Time and Temperature: 48 hours at 75F
    Special Comments: Mix ration of Part A to Part B is 1:1.
[2] Colors: Off-White, Medium Gray, Safety Blue, Light Blue
    Number of Coats: 1
    Sequence of Coats: Any combination of listed colors
    Maximum Field Use Dry Thickness (in mils): 60
    Maximum Thinner: None
    Final Cure Time and Temperature: 5 days at 72F
    Special Comments: Mix ration of Part A:Part B is 1:1 by volume.
[3] Number of Coats: 1
    Maximum Field Use Dry Film Thickness (in mils): 60
    Maximum Thinner: None
    Final Cure Time and Temperature: 7 days at 70°F
    Special Comments: Spray application using a plural component heated airless spray unit.
    Mix ratio of Part A to Part B is 1:1 by volume.

Coatings - Tank
Corrocote II PW[1] >= 30,000 gal. D. HOT PUR
Corrocote II PW (AM)[1] >= 30,000 gal. D. HOT PUR
Corropipe II PW (FS)[2] >= 300 gal. CLD 23 PUR
Corropipe II PW (FS) AM[2] >= 300 gal. CLD 23 PUR

[1] Colors: Off-White, Medium Gray 
    Number of Coats: 1
    Sequence of Coats: Any combination of listed colors
    Maximum Field Use Dry Film Thickness (in mils): 80
    Maximum Thinner: None
    Final Cure Time and Temperature: 48 hours at 75F
    Special Comments: Mix ration of Part A to Part B is 1:1.
[2] Colors: Off-White, Medium Gray, Safety Blue, Light Blue
    Number of Coats: 1
    Sequence of Coats: Any combination of listed colors
    Maximum Field Use Dry Thickness (in mils): 60
    Maximum Thinner: None
    Final Cure Time and Temperature: 5 days at 72F
    Special Comments: Mix ration of Part A:Part B is 1:1 by volume.



 
Simpson Strong-Tie Company 
5956 West Las Positas Boulevard
Pleasanton, CA 94588 
United States 
800-999-5099


Facility : West Chicago, IL

Joining and Sealing Materials

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Adhesives
AT-XP [1] CLD 23 ACR
AT-XP10 [1] CLD 23 ACR
AT-XP13 [1] CLD 23 ACR
AT-XP30 [1] CLD 23 ACR
SET High Strength Epoxy [2] CLD 23 EPOXY
SET-3G [2] CLD 23 EPOXY
SET-PAC [2] CLD 23 EPOXY
SET-XP [2] CLD 23 EPOXY
SET-XP22 [2] CLD 23 EPOXY
SET22 [2] CLD 23 EPOXY
SET56 [2] CLD 23 EPOXY
SETPAC-EZ [2] CLD 23 EPOXY

[1] Certified for a maximum exposed surface area of 43.2 sq. in./1000 gal.
[2] Certified for a maximum exposed surface area of 216 sq. in./1000 gal.

Sealants
CI-LV [3] CLD 23 EPOXY
CILV32 [3] CLD 23 EPOXY
CILVKT3 [3] CLD 23 EPOXY
ETI-LV Injection Epoxy [4] CLD 23 EPOXY
ETILV [4] CLD 23 EPOXY
ETILV22 [4] CLD 23 EPOXY
SET High Strength Epoxy [2] CLD 23 EPOXY
SET-3G [2] CLD 23 EPOXY
SET-PAC [2] CLD 23 EPOXY
SET-XP [2] CLD 23 EPOXY
SET-XP22 [2] CLD 23 EPOXY
SET22 [2] CLD 23 EPOXY
SET56 [2] CLD 23 EPOXY
SETPAC-EZ [2] CLD 23 EPOXY

[2] Certified for a maximum exposed surface area of 216 sq. in./1000 gal.
[3] Certified for a maximum surface area of 719 square inches per 1000 gallons.  Mix ratio
    2:1 (Resin:Cure).
[4] Certified for a maximum exposed surface area of 22 sq. in./1000 gal.


Protective (Barrier) Materials

    Water Water
  Water Contact Contact Contact
Trade Designation Size Restriction Temp Material

Coatings - Fittings[1]
Simpson Strong-Tie Composite Strengthening System >= 1" CLD 23 EPOXY

[1] Product is applied in 4 layers:
    Protective (Barrier) Materials
    Layer 1: CSS-ES or CSS-UES Primer apply 10 wet mils. Mix ratio of Part A to B is 2:1 by
    volume. Mix with a drill and mixing
    paddle until uniformly blended (5 minutes at 500 rpm). Apply 1 coat.
    Layer 2: CSS-EP Paste Filler apply 40 wet mils. Mix ratio of Part A to B is 2:1 by
    volume. Mix with a drill and
    mixing paddle until uniformly blended (5 minutes at 500 rpm). Apply 1 coat.
    Layer 3: CSS-CUGF27 Fabric saturated with CSS-ES or CSS-UES (follow mixing instructions
    above). Apply 1 coat. Maximum
    thickness is 50 mils.
    Layer 4: CSS-CUCF44 Fabric saturated with CSS-ES or CSS-UES (follow mixing instructions
    above). Apply 10 coats. Maximum
    thickness is 80 mils per coat.
    Saturation rate for fabrics: 1 gallon per 50 square feet of CSS-CUGF27 and 1 gallon per
    25 square feet of CSS-CUCF44.
    Final cure time is 72 hours at 70°F. There is no cure between the application of layers.

Coatings - Pipe - Immediate Return to Service[1]
Simpson Strong-Tie Composite Strengthening System >= 60" CLD 23 EPOXY

[1] Product is applied in 4 layers:
    Protective (Barrier) Materials
    Layer 1: CSS-ES or CSS-UES Primer apply 10 wet mils. Mix ratio of Part A to B is 2:1 by
    volume. Mix with a drill and mixing
    paddle until uniformly blended (5 minutes at 500 rpm). Apply 1 coat.
    Layer 2: CSS-EP Paste Filler apply 40 wet mils. Mix ratio of Part A to B is 2:1 by
    volume. Mix with a drill and
    mixing paddle until uniformly blended (5 minutes at 500 rpm). Apply 1 coat.
    Layer 3: CSS-CUGF27 Fabric saturated with CSS-ES or CSS-UES (follow mixing instructions
    above). Apply 1 coat. Maximum
    thickness is 50 mils.
    Layer 4: CSS-CUCF44 Fabric saturated with CSS-ES or CSS-UES (follow mixing instructions
    above). Apply 10 coats. Maximum
    thickness is 80 mils per coat.
    Saturation rate for fabrics: 1 gallon per 50 square feet of CSS-CUGF27 and 1 gallon per
    25 square feet of CSS-CUCF44.
    Final cure time is 72 hours at 70°F. There is no cure between the application of layers.

Coatings - Tank[1]
Simpson Strong-Tie Composite Strengthening System >= 6,000 gal. CLD 23 EPOXY

[1] Product is applied in 4 layers:
    Protective (Barrier) Materials
    Layer 1: CSS-ES or CSS-UES Primer apply 10 wet mils. Mix ratio of Part A to B is 2:1 by
    volume. Mix with a drill and mixing
    paddle until uniformly blended (5 minutes at 500 rpm). Apply 1 coat.
    Layer 2: CSS-EP Paste Filler apply 40 wet mils. Mix ratio of Part A to B is 2:1 by
    volume. Mix with a drill and
    mixing paddle until uniformly blended (5 minutes at 500 rpm). Apply 1 coat.
    Layer 3: CSS-CUGF27 Fabric saturated with CSS-ES or CSS-UES (follow mixing instructions
    above). Apply 1 coat. Maximum
    thickness is 50 mils.
    Layer 4: CSS-CUCF44 Fabric saturated with CSS-ES or CSS-UES (follow mixing instructions
    above). Apply 10 coats. Maximum
    thickness is 80 mils per coat.
    Saturation rate for fabrics: 1 gallon per 50 square feet of CSS-CUGF27 and 1 gallon per
    25 square feet of CSS-CUCF44.
    Final cure time is 72 hours at 70°F. There is no cure between the application of layers.



 
Skyway Cement Company LLC 
3020 East 103rd Street
Chicago, IL 60617 
United States 
800-643-1808
Visit this company's website


Facility : Chicago, IL

Protective (Barrier) Materials

    Water Water
  Water Contact Contact Contact
Trade Designation Size Restriction Temp Material

Cements [G]
Skyway Cement[1] [2] CLD 23 CMNT

[1] This product may be used at a maximum use level of 80% as a replacement for Portland
    Cement.
[2] Certified for pipes 4" and greater, tanks 1000 gallons and greater.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    



 
SUEZ Treatment Solutions Inc. 
8007 Discovery Drive
Richmond, VA 23229 
United States 
800-446-1150 
804-756-7600


Facility : Addison, IL

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Filter Underdrain
Monoflor HD Ledge Plate [1] CLD 23 MLTPL
Monoflor HD Nozzle Adapter (long or short) [1] CLD 23 MLTPL
Monoflor HD Shim Collar [1] CLD 23 MLTPL
Monoflor HD Support Form [1] CLD 23 MLTPL

[1] Certified for a minimum flow rate of 1,440 gallons/day/square foot.



 
The Euclid Chemical Company 
3835 State Route 72
Kirkland, IL 60146 
United States 
815-522-3394
Visit this company's website


Facility : Kirkland, IL

Joining and Sealing Materials

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Patching Materials
Tamms Structural Mortar[1] [2] [3] [4] CLD 23 CMNT

[1] Mix ratio is 2.4-3.3 L of water per 50 lb mortar.
[2] Certified for a 7 day moist cure at 73 +/- 3 degrees and 100% relative humidity followed
    by a 1-3 day air cure at 73 +/- 3 degrees and 50% relative humidity.
[3] Certification does not include Duralprep AC primer or Eucobar evaporation retarder.
[4] Certified for use at a maximum of 50% of tanks 20,000 gallons and greater, 50% of pipes
    60" diameter and greater, and 50% of fittings 4" diameter and greater.


Protective (Barrier) Materials

    Water Water
  Water Contact Contact Contact
Trade Designation Size Restriction Temp Material

Coatings - Fittings[1] [2]
Tamoseal Gray >= 4 in CLD 23 CMNT
Tamoseal Gray N >= 4 in CLD 23 CMNT
Tamoseal White >= 4 in CLD 23 CMNT
Tamoseal White N >= 4 in CLD 23 CMNT

[1] Certified for use with Akkro 7-T admixture only. Not Certified for use with Flex-Con
    admixture.
[2] Number Of Coats: 2
    Maximium Field Use Dry Thickness(in mils): 125 mils
    Recoat Cure Time and Temperature: 12 hours at 40°F
    Final Cure Time/Temperature: 7 days at 40°F
    Colors: Gray, White
    Special Comments: Akkro-7T is mixed 1:3 (Akkro: water) as the mixing liquid and then
    used at 2 gal per 50 lb
    Tamoseal. Induction time is 10 minutes.

Coatings - Pipe[1] [2]
Tamoseal Gray >= 36 in CLD 23 CMNT
Tamoseal Gray N >= 36 in CLD 23 CMNT
Tamoseal White >= 36 in CLD 23 CMNT
Tamoseal White N >= 36 in CLD 23 CMNT

[1] Certified for use with Akkro 7-T admixture only. Not Certified for use with Flex-Con
    admixture.
[2] Number Of Coats: 2
    Maximium Field Use Dry Thickness(in mils): 125 mils
    Recoat Cure Time and Temperature: 12 hours at 40°F
    Final Cure Time/Temperature: 7 days at 40°F
    Colors: Gray, White
    Special Comments: Akkro-7T is mixed 1:3 (Akkro: water) as the mixing liquid and then
    used at 2 gal per 50 lb
    Tamoseal. Induction time is 10 minutes.

Coatings - Tank
Hey'Di K-11/Hey'Di SB[3] >= 1000 gal. CLD 23 CMNT
Tamoseal Gray[1] [2] >= 1000 gal. CLD 23 CMNT
Tamoseal Gray N[1] [2] >= 1000 gal. CLD 23 CMNT
Tamoseal Ultra/Tamoseal Ultra Liquid[3] >= 1000 gal. CLD 23 CMNT
Tamoseal White[1] [2] >= 1000 gal. CLD 23 CMNT
Tamoseal White N[1] [2] >= 1000 gal. CLD 23 CMNT

[1] Certified for use with Akkro 7-T admixture only. Not Certified for use with Flex-Con
    admixture.
[2] Number Of Coats: 2
    Maximium Field Use Dry Thickness(in mils): 125 mils
    Recoat Cure Time and Temperature: 12 hours at 40°F
    Final Cure Time/Temperature: 7 days at 40°F
    Colors: Gray, White
    Special Comments: Akkro-7T is mixed 1:3 (Akkro: water) as the mixing liquid and then
    used at 2 gal per 50 lb
    Tamoseal. Induction time is 10 minutes.
[3] Colors: Gray, white
    Number of Coats: 2
    Sequence of Coats: N/A
    Maximum Field Use Dry Film Thickness (in mils): 60
    Maximum Thinner: None
    Recoat Cure Time and Temperature: 24 hours at 75°F
    Final Cure Time and Temperature: 7 days at 75°F
    Special Comments: Apply to concrete at a rate of 0.25 lb. mixed slurry per square foot.
    Mix 1:5 Hey'Di SB Bonding with water then mix that at 50 lb. Hey'Di K-11 to 2 gallons of
    mixed SB Bonding.
    



 
Thompson Pipe Group - Pressure 
1003 North MacArthur Boulevard
Grand Prairie, TX 75050 
United States 
972-262-3600


Facility : South Beloit, IL

Pipes and Related Products

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Fittings[1]
Concrete Pressure Pipe Fittings 16" - 144" CLD 23 MLTPL
Concrete Pressure Pipe Fittings (C300) 16" - 144" CLD 23 MLTPL
Concrete Pressure Pipe Fittings (E) 16" - 144" CLD 23 MLTPL
Concrete Pressure Pipe Fittings (E-301) 16" - 144" CLD 23 MLTPL
Concrete Pressure Pipe Fittings (E301) 16" - 144" CLD 23 MLTPL
Concrete Pressure Pipe Fittings (ECP) 16" - 144" CLD 23 MLTPL
Concrete Pressure Pipe Fittings (L) 16" - 144" CLD 23 MLTPL
Concrete Pressure Pipe Fittings (L-301) 16" - 144" CLD 23 MLTPL
Concrete Pressure Pipe Fittings (L301) 16" - 144" CLD 23 MLTPL
Concrete Pressure Pipe Fittings (LCP) 16" - 144" CLD 23 MLTPL

[1] Certification includes lubricant, form oil, joint rings, and patch compound. Gaskets
    used with this system must be NSF Certified for the applicable diameter pipe size.

Pipe[1]
Embedded Cylider Pipe (C300) 24" - 144" CLD 23 MLTPL
Embedded Cylider Pipe (E) 24" - 144" CLD 23 MLTPL
Embedded Cylider Pipe (E-301) 24" - 144" CLD 23 MLTPL
Embedded Cylider Pipe (E301) 24" - 144" CLD 23 MLTPL
Embedded Cylider Pipe (L) 24" - 144" CLD 23 MLTPL
Embedded Cylider Pipe (L-301) 24" - 144" CLD 23 MLTPL
Embedded Cylider Pipe (L301) 24" - 144" CLD 23 MLTPL
Embedded Cylider Pipe (LCP) 24" - 144" CLD 23 MLTPL
Embedded Cylinder Pipe (ECP) 24" - 144" CLD 23 MLTPL
Lined Cylinder Pipe (L) 16" - 48" CLD 23 MLTPL
Lined Cylinder Pipe (L-301) 16" - 48" CLD 23 MLTPL
Lined Cylinder Pipe (L301) 16" - 48" CLD 23 MLTPL
Lined Cylinder Pipe (LCP) 16" - 48" CLD 23 MLTPL

[1] Certification includes lubricant, form oil, joint rings, and patch compound. Gaskets
    used with this system must be NSF Certified for the applicable diameter pipe size.



 
United Gilsonite Laboratories, Inc. 
1396 Jefferson Avenue
Dunmore, PA 18509 
United States 
800-845-5227 
570-344-1202
Visit this company's website


Facility : Jacksonville, IL

Protective (Barrier) Materials

    Water Water
  Water Contact Contact Contact
Trade Designation Size Restriction Temp Material

Coatings - Tank[1] [2]
DRYLOK® Powdered Masonry Waterproofer >= 700 gal. CLD 23 CMNT

[1] Number of Coats: 2
    Maximum Field Use Dry Film Thickness (in mils): 30  (15 per coat)
    Recoat Cure Time and Temperature: 12 hours/50°F
    Final Cure Time and Temperature: 12 hours/50°F
    Special Comments: Add 2 pints of cold water for each 10 pounds of DRYLOK Powdered
    Masonry Waterproofer. Stir until mixture is free of lumps. Thin with an additional 2
    pints of water for normal application or 11/2 pints of water for heavy application. Stir
    until smooth. Wait for 15 minutes, restir and apply.
[2] Certification does not include DRYLOK® Fast Plug or DRYLOK® Latex Bonding Agent.



 
WesTech Engineering, Inc. 
600 Arrasmith Trail
Ames, IA 50010 
United States 
515-268-8400
Visit this company's website


Facility : Freeport, IL

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Filter Underdrain
Concrete Insert [1] CLD 23 MLTPL
Underdrain Nozzle [1] CLD 23 MLTPL

[1] Certified sizes are as follows:
    Concrete Insert - Multiple
    Pan Form - 541 sq. in./sq. ft.
    Underdrain Nozzle - 3014 sq. in./sq. ft.

Water Treatment Devices
Pan Form [1] CLD 23 MLTPL
Underdrain Nozzle [1] CLD 23 MLTPL

[1] Certified sizes are as follows:
    Concrete Insert - Multiple
    Pan Form - 541 sq. in./sq. ft.
    Underdrain Nozzle - 3014 sq. in./sq. ft.


Number of matching Manufacturers is 31
Number of matching Products is 258
Processing time was 11 seconds