NSF Product and Service Listings

These NSF Official Listings are current as of Saturday, July 13, 2024 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.

Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/Plumbing/Listings.asp?Company=36160&

Did you know?

The new NSF Product Listings website is available for NSF/ANSI 14-Certified products with a new look and feel. Click on "Try it Now" to check it out!

NSF/ANSI 14
Plastics Piping System Components and Related Materials


Click here for a list of End Use Code Designations.

Click on Product Standards or footnote in blue to view the referenced document



 
Performance Pipe 
A Div. of Chevron Phillips Chem Co., LP
8261 Belleview Drive 
Suite 110 
Plano, TX 75024 
United States 
972-599-6600
Visit this company's website

Facility : Bloomfield, IA

Gas Applications - Pipe and Fittings

Product Type   Material Type   Trade Name   Product Standard

Socket Fittings! * ^ ¢ §
 
PE 2406/2708
 
Driscoplex® 6500
 
ASTM D2513/CSA B137.4

90 Degree Elbow
1/2", 1" CTS SDR 7   1/2", 3/4", 1", 1 1/4", 1 1/2", 2", 3", 4" IPS DR 7  

Coupling
1/2", 3/4", 1" CTS SDR 7   1/2", 3/4", 1", 1 1/4", 1 1/2", 2", 3" 4" IPS DR 7   1 1/4" CTS SDR 9  

End Cap
1/2", 1" CTS SDR 7   1/2", 3/4", 1", 1 1/2", 2", 3", 4" IPS SDR 7   1 1/4" CTS SDR 9.3   1 1/4" IPS SDR 7.3  

Purge Cap (w/ 1/2" CTS outlet)
1 1/4", 2", 3", 4" IPS DR 7  

Reducer Coupling
1/2" IPS x 1/2" CTS DR 7   3/4" CTS x 1/2" CTS DR 7   3/4" IPS x 1/2" CTS DR 7   3/4" IPS x 1/2" IPS DR 7  
1" CTS x 1/2" CTS DR 7   1" CTS x 1/2" IPS DR 7   1" IPS x 1/2" CTS DR 7   1" IPS x 1/2" IPS DR 7  
1" IPS x 3/4" CTS DR 7   1" IPS x 3/4" IPS DR 7   1" CTS x 3/4" IPS DR 7   1" IPS x 1" CTS DR 7  
1 1/2" IPS x 1 1/4" IPS DR 7   1 1/4" IPS x 1 1/4" CTS DR 7.3   1 1/4" IPS x 1/2" IPS DR 7   1 1/4" IPS x 3/4" IPS DR 7  
1 1/4" IPS x 1" IPS DR 7   1 1/4" IPS x 1" CTS DR 7   1 1/4" IPS X 3/4" CTS DR 7.3   2" IPS x 1" CTS DR 7  
2" IPS x 1" IPS DR 7   2" IPS x 1 1/4" CTS DR 7   2" IPS x 1 1/4" IPS DR 7   2" IPS x 1 1/2" IPS DR 7  
3" IPS x 2" IPS DR 7   4" IPS x 2" IPS DR 7   4" IPS x 3" IPS DR 7  

Service (Branch)(Outlet x Base)
1/2" CTS DR 7 x 1 1/4" - 12" IPS   1/2" IPS DR 7 x 1 1/4" - 12" IPS   3/4" IPS DR 7 x 1 1/4" - 12" IPS   1" CTS DR 7 x 1 1/4" - 12" IPS  
1" IPS DR 7 x 1 1/4" - 12" IPS   1 1/4" IPS DR 7 x 2" - 12" IPS  

Tapping Tee (Outlet x Base)
1/2" CTS DR 7 x 1 1/4" - 18" IPS   1/2" IPS DR 7 x 1 1/4" - 18" IPS   3/4" CTS DR 7 x 1 1/4" - 18" IPS   3/4" IPS DR 7 x 1 1/4" - 18" IPS  
1" CTS DR 7 x 1 1/4" - 18" IPS   1" IPS DR 7 x 1 1/4" - 18" IPS   1 1/4" CTS DR 7 x 2" - 18" IPS   1 1/4" IPS DR 7 x 2" – 18" IPS  

Tee
1/2" CTS DR 7   1/2", 3/4", 1", 1 1/4", 1 1/2", 2", 4" IPS DR 7   1" CTS DR 7.3   3" IPS DR 7.3  

! Product may or may not bear the NSF U.P. Code marking.
* Gas pipe and tubing limited to outside underground use only.
^ Meets the requirements of ASTM D2683.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.

Butt Fusion Fittings! * ~ ¢ §
 
PE 2406/2708
 
Driscoplex® 6500
 
ASTM D2513/CSA B137.4

45 Degree Elbow
2" IPS SDR 7 - 11   3", 4", 6", 8" IPS SDR 7 - 17  

90 Degree Elbow
1/2" CTS x .090" WALL   3/4" IPS SDR 11   1", 1 1/4" IPS SDR 9 - 11   1 1/2" IPS SDR 11  
2" IPS SDR 7 – 11   3", 4", 6", 8" IPS SDR 7 - 17  

Branch Saddle (Outlet x Base)
1/2" CTS (.090" Wall) x 1 1/4" – 24" IPS   1/2" IPS DR 9.3 x 1 1/4" – 24" IPS   3/4" IPS DR 9, 11 x 1 1/4" – 24" IPS   1" IPS DR 9, 11 x 2" – 24" IPS  
1 1/4" IPS DR 11 x 2" – 24" IPS   1 1/2" IPS DR 11 x 2" – 24" IPS   2" IPS DR 9, 11 x 3" – 24" IPS   3" IPS DR 7 - 11 x 3" – 24" IPS  
4" IPS DR 7 - 11 x 3" – 24" IPS   6" IPS DR 11 x 8" – 24" IPS  

End Cap
1/2" CTS (.090" Wall)   1/2" IPS DR 9.3   3/4" IPS SDR 11   1" CTS x (.102" Wall)  
1" IPS SDR 11   1 1/4" IPS SDR 10   1 1/2" IPS SDR 11   2" IPS SDR 11  
3" IPS SDR 11/11.5   4" IPS DR 11/11.5, 13.5   6" IPS DR 11/11.5, 13.5   8" IPS DR 11, 13.5  

Purge Cap (Outlet x Main)
1/2" CTS x 2", 3", 4", 6", 8" IPS DR 11   3/4" IPS x 2", 3", 4", 6", 8" IPS DR 11   1" CTS x 2", 3", 4", 6", 8" IPS DR 11  

Purge Point
1 1/4" DR 10   2" DR 11  

Reducer Coupling
1/2" IPS DR 9.3 x 1/2" CTS (.090" Wall)   3/4" IPS DR 11 x 1/2" CTS (.090" Wall)   1" x 3/4" IPS DR 11   1" CTS (.102" Wall) x 1/2" CTS (.090" Wall)  
1" IPS DR 11 x 1/2" CTS (.090" Wall)   1" IPS DR 11 x 1/2" IPS DR 9.3   1" IPS DR 11 x 3/4" CTS (.077" Wall, .090" Wall)   1" IPS DR 11 x 1" CTS (.102" Wall)  
1 1/4" CTS (.121" Wall) x 1" IPS DR 11   1 1/2" x 3/4" IPS DR 11   1 1/2" x 1" IPS DR 11   2" x 1" IPS DR 11  
2" IPS DR 11 x 1 1/4" IPS   2" x 1 1/2" IPS DR 11   3" x 2" IPS DR 11   4" IPS DR 13.5 x 2" DR 11  
4" IPS DR 13.5 x 3" DR 11   4" x 2" IPS DR 11   4" x 3" IPS DR 11   6" x 4" IPS DR 11, 13.5  
8" x 6" IPS DR 11, 13.5  

Tapping Tee (Outlet x Base)
1/2" CTS (.090" Wall) x 1 1/4"- 24" IPS   1/2" IPS DR 9.3 x 1 1/4" – 24" IPS   3/4" IPS DR 11 x 1 1/4" – 24" IPS   1" CTS (.090" Wall) x 1 1/4" – 24" IPS  
1" IPS DR 11 x 1 1/4" – 24" IPS   1" CTS (0.090, 0.102" Wall) x 1 1/4" - 24" IPS   1 1/4" IPS DR 11 x 2" – 24" IPS   2" IPS DR 11 x 3" - 24" IPS  

Tee
1/2" CTS (.090" Wall)   3/4" IPS DR 11   1" CTS (.102" Wall)   1" IPS DR 11  
1 1/4" IPS DR 10   1 1/2" IPS DR 11   2" IPS DR 11   3" IPS DR 11/11.5  
4" IPS DR 11 – 13.5   6" IPS DR 11 – 13.5   8" IPS DR 11 – 13.5  

! Product may or may not bear the NSF U.P. Code marking.
* Gas pipe and tubing limited to outside underground use only.
~ Meets the requirements of ASTM D3261.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.

Socket Fittings! * ^ ¢ §
 
PE 4710
 
Driscoplex® 8100
 
ASTM D2513/CSA B137.4

90 Degree Elbow
1/2", 1" CTS SDR 7   1/2", 3/4", 1", 1 1/4", 1 1/2", 2", 3", 4" IPS DR 7  

Coupling
1/2", 3/4", 1" CTS SDR 7   1/2", 3/4", 1", 1 1/4", 1 1/2", 2", 3", 4" IPS DR 7  

End Cap
1/2", 1" CTS SDR 7   1/2", 3/4", 1", 1 1/2", 2", 3", 4" IPS SDR 7   1 1/4" IPS SDR 7.3  

Purge Cap (w/ 1/2" CTS outlet)
1 1/4", 2", 3", 4" IPS DR 7  

Reducer Coupling
1/2" IPS x 1/2" CTS DR 7   3/4" CTS x 1/2" CTS DR 7   3/4" IPS x 1/2" CTS DR 7   3/4" IPS x 1/2" IPS DR 7  
1" CTS x 1/2" CTS DR 7   1" CTS x 1/2" IPS DR 7   1" IPS x 1/2" CTS DR 7   1" IPS x 1/2" IPS DR 7  
1" IPS x 3/4" CTS DR 7   1" IPS x 3/4" IPS DR 7   1" CTS x 3/4" IPS DR 7   1" IPS x 1" CTS DR 7  
1 1/2" IPS x 1 1/4" IPS DR 7   1 1/4" IPS x 1 1/4" CTS DR 7.3   1 1/4" IPS x 1/2" IPS DR 7   1 1/4" IPS x 3/4" IPS DR 7  
1 1/4" IPS x 3/4" CTS DR 7.3   1 1/4" IPS x 1" IPS DR 7   1 1/4" IPS x 1" CTS DR 7   2" IPS x 1" CTS DR 7  
2" IPS x 1" IPS DR 7   2" IPS x 1 1/4" CTS DR 7.3   2" IPS x 1 1/4" IPS DR 7   2" IPS x 1 1/2" IPS DR 7  
3" IPS x 2" IPS DR 7   4" IPS x 2" IPS DR 7   4" IPS x 3" IPS DR 7  

Service(Branch) Saddle (Outlet x Base)
1/2" CTS DR 7 x 1 1/4" - 24" IPS   1/2" IPS DR 7 x 1 1/4" - 24" IPS   3/4" IPS DR 7 x 1 1/4" - 24" IPS   1" CTS DR 7 x 1 1/4" - 24" IPS  
1" IPS DR 7 x 1 1/4" - 24" IPS   1 1/4" IPS DR 7 x 2" - 24" IPS  

Tapping Tee (Outlet x Base)
1/2" CTS DR 7 x 1 1/4" - 24" IPS   1/2" IPS DR 7 x 1 1/4" - 24" IPS   3/4" CTS DR 7 x 1 1/4" - 24" IPS   3/4" IPS DR 7 x 1 1/4" - 24" IPS  
1" CTS DR 7 x 1 1/4" - 24" IPS   1" IPS DR 7 x 1 1/4" - 24" IPS   1 1/4" CTS DR 7 x 2" - 24" IPS   1 1/4" IPS DR 7 x 2" – 24" IPS  

Tee
1/2" CTS DR 7   1/2", 3/4", 1", 1 1/4", 1 1/2", 2", 4" IPS DR 7   1" CTS DR 7.3   3" IPS DR 7.3  

! Product may or may not bear the NSF U.P. Code marking.
* Gas pipe and tubing limited to outside underground use only.
^ Meets the requirements of ASTM D2683.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.

Butt Fusion Fittings! * ~ ¢ §
 
PE 4710
 
Driscoplex® 8100
 
ASTM D2513/CSA B137.4

45 Degree Elbow
2", 3" IPS SDR 7 - 11   4", 6", 8" IPS SDR 7 - 17  

90 Degree Elbow
1/2" CTS x .090" WALL   3/4" IPS SDR 11   1", 1 1/4" IPS SDR 9, 11   1 1/2" IPS SDR 11  
2", 3" IPS SDR 7 - 11   4", 6", 8" IPS SDR 7 - 17  

Branch Saddle (Outlet x Base)
1/2" CTS (.090" Wall) x 1 1/4" – 24" IPS   1/2" IPS DR 9.3 x 1 1/4" – 24" IPS   3/4" IPS DR 9 - 11 x 1 1/4" – 24" IPS   1" IPS DR 9 - 11 x 2" – 24" IPS  
1 1/4" IPS DR 11 x 2" – 24" IPS   1 1/2" IPS DR 11 x 2" – 24" IPS   2" IPS DR 9 - 11 x 3" – 24" IPS   3" IPS DR 7 - 11 x 3" – 24" IPS  
4" IPS DR 7 - 11 x 3" – 24" IPS   6" IPS DR 11 x 8" – 24" IPS  

End Cap
1/2" CTS (.090" WALL)   1/2" IPS DR 9.3   3/4" CTS (.090" WALL)   3/4" IPS SDR 11  
1" CTS (.102", .125" WALL)   1" IPS SDR 9, 11   1 1/4" IPS SDR 9, 11   1 1/2" IPS SDR 11  
2" IPS SDR 7 - 11   3" IPS SDR 7 – 17   4", 6", 8" IPS SDR 7 - 17  

Purge Cap/Purge Point
1/2" CTS x 2" - 8" IPS DR 11   3/4" IPS x 2" – 8" IPS DR 11   1" CTS x 2" – 8" IPS DR 11   1 1/4" DR 10  
2" DR 11  

Reducer Coupling
3/4" IPS DR 11 x 1/2" CTS (.090" Wall)   3/4" IPS DR 11 x 3/4" CTS (.090" Wall)   1" x 1/2" IPS DR 11   1" x 3/4" IPS DR 11  
1" CTS (.102" Wall) x 1/2" CTS (.090" Wall)   1" IPS DR 9 x 1" CTS (.125" Wall)   1" IPS DR 11 x 1/2" CTS (.090" Wall)   1" IPS DR 11 x 1" CTS (.102" Wall)  
1 1/4" x 1" IPS DR 11   1 1/4" CTS (.121" Wall) X 1" IPS DR 11   1 1/4" IPS DR 11 x 1" CTS (.102" Wall)   1 1/4" IPS DR 11 x 1 1/4" CTS (.090" Wall)  
1 1/2" x 3/4" IPS DR 11   1 1/2" x 1" IPS DR 11   2" x 1" IPS DR 11   2" x 1 1/2" IPS DR 9 - 11  
2" IPS DR 11 x 1 1/4" IPS DR 9 - 11   3" x 2" IPS DR 7 - 11   4" IPS DR 11 - 13.5 x 2" DR 7 - 17   6" x 4" IPS DR 7 - 17  
4" x 3" IPS DR 11   8" x 6" IPS DR 7 - 17  

Tapping Tee for Gas Applications (Outlet x Base)
1/2" CTS (.090" Wall) x 1 1/4" - 24"   1/2" IPS DR 9.3 x 1 1/4" – 24"   3/4" IPS DR 11 x 1 1/4" – 24"   1" CTS (.090" Wall) X 1 1/4" – 24"  
1" CTS (0.090, 0.102" Wall) x 1 1/4" - 24" IPS   1" IPS DR 11 x 1 1/4" – 24"   1 1/4" IPS DR 11 x 2" – 24"   2" IPS DR 11 x 3" - 24" IPS  

Tee
3/4" IPS DR 11   1" IPS DR 9 - 11   1 1/4" IPS DR 11   1 1/2" IPS DR 11  
2", 3" IPS SDR 7 - 11   4", 6", 8" IPS SDR 7 - 17  

! Product may or may not bear the NSF U.P. Code marking.
* Gas pipe and tubing limited to outside underground use only.
~ Meets the requirements of ASTM D3261.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.


Potable Water - Pipe and Fittings

Product Type   Material Type   Trade Name   Product Standard

Socket Fittings! + § [G]
 
PE 4710
 
Driscoplex® 8100
 
ASTM D2683

90 Degree Elbow
1/2", 1" CTS SDR 7   1/2", 3/4", 1", 1 1/4", 1 1/2", 2", 3", 4" IPS DR 7  

Coupling
1/2", 3/4", 1" CTS SDR 7   1/2", 3/4", 1", 1 1/4", 1 1/2", 2", 3'', 4" IPS DR 7  

End Cap
1/2", 1" CTS SDR 7   1/2", 3/4", 1", 1 1/2", 2", 3", 4" IPS SDR 7  

Purge Cap (w/ 1/2" CTS outlet)
1 1/4", 2", 3", 4" IPS DR 7  

Reducer Coupling
1/2" IPS x 1/2" CTS DR 7   3/4" CTS x 1/2" CTS DR 7   3/4" IPS x 1/2" CTS DR 7   3/4" IPS x 1/2" IPS DR 7  
1" CTS x 1/2" CTS DR 7   1" CTS x 1/2" IPS DR 7   1" IPS x 1/2" CTS DR 7   1" IPS x 1/2" IPS DR 7  
1" IPS x 3/4" CTS DR 7   1" IPS x 3/4" IPS DR 7   1" CTS x 3/4" IPS DR 7   1" IPS x 1" CTS DR 7  
1 1/2" IPS x 1 1/4" IPS DR 7   1 1/4" IPS x 1 1/4" CTS DR 7.3   1 1/4" IPS x 1/2" IPS DR 7   1 1/4" IPS x 3/4" IPS DR 7  
1 1/4" IPS x 1" IPS DR 7   1 1/4" IPS x 1" CTS DR 7   1 1/4" IPS x 3/4" CTS DR 7.3   2" x 1 1/4" IPS DR 7  
2" IPS x 1" CTS DR 7   2" IPS x 1" IPS DR 7   2" IPS x 1 1/4" CTS DR 7.3   2" IPS x 1 1/2" IPS DR 7  
3" IPS x 2" IPS DR 7   4" IPS x 2" IPS DR 7   4" IPS x 3" IPS DR 7  

Service (Branch) Saddle (Outlet x Base)
1/2" CTS DR 7 x 1 1/4" - 24" IPS   1/2" IPS DR 7 x 1 1/4" - 24" IPS   3/4" IPS DR 7 x 1 1/4" - 24" IPS   1" CTS DR 7 x 1 1/4" - 24" IPS  
1" IPS DR 7 x 1 1/4" - 24" IPS   1 1/4" IPS DR 7 x 2" - 24" IPS  

Tapping Tee (Outlet x Base)
1 1/4" IPS DR 7 x 2" – 24" IPS   1/2" CTS DR 7 x 1 1/4" - 24" IPS   1/2" IPS DR 7 x 1 1/4" - 24" IPS   3/4" CTS DR 7 x 1 1/4" - 24" IPS  
3/4" IPS DR 7 x 1 1/4" - 24" IPS   1" CTS DR 7 x 1 1/4" - 24" IPS   1" IPS DR 7 x 1 1/4" - 24" IPS   1 1/4" CTS DR 7 x 2"- 24" IPS  

Tee
1/2" CTS DR 7   1/2", 3/4", 1", 1 1/4", 1 1/2", 2", 4" IPS DR 7   1" CTS DR 7.3   3" IPS DR 7.3  

! Product may or may not bear the NSF U.P. Code marking.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Butt Fusion Fittings! + § [G]
 
PE 4710
 
Driscoplex® 8100
 
ASTM D3261

45 Degree Elbow
2", 3" IPS SDR 7 – 11   4", 6", 8" IPS SDR 7 - 17  

90 Degree Elbow
2", 3" IPS SDR 7 – 11   4", 6", 8" IPS SDR 7 - 17  

Branch Saddle (Outlet x Base)
2" IPS DR 9 x 3" – 24" IPS   3" IPS DR 7 - 9 x 3" – 24" IPS   4" IPS DR 7 - 11 x 3" – 24" IPS   6" IPS DR 11 x 8" – 24" IPS  

End Cap
2", 3" IPS SDR 7 – 11   4", 6", 8" IPS SDR 7 - 17  

Flange Adapter
1 1/2" IPS DR 9   2", 3" IPS DR 7 - 9   4", 6", 8", 10", 12", 14" IPS DR 7 - 17   16" IPS DR 9 - 17  
18" DR IPS 11 - 17  

Reducer Coupling
2" x 1 1/2" IPS DR 9   3" x 2" IPS DR 7 - 9   4" x 2" IPS DR 7 - 17   4" x 3" IPS DR 7 - 17  
6" x 4" IPS DR 7 - 17   8" x 6" IPS DR 7 - 17  

Tee
1" IPS DR 9   2", 3" IPS DR 7 - 9   4", 6", 8" IPS DR 7 - 17  

! Product may or may not bear the NSF U.P. Code marking.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Butt Fusion Fittings! + ^ § [G]
 
PE 4710
 
Driscoplex® 1500
 
ASTM D3261

45 Degree Elbow
2", 3" IPS SDR 7 – 11   4", 6", 8" IPS SDR 7 - 11  

90 Degree Elbow
2", 3" IPS SDR 7 – 11   4", 6", 8" IPS SDR 7 - 11  

Branch Saddle (Outlet x Base)
2" IPS DR 9 x 3" – 24" IPS   3" IPS DR 7 - 9 x 3" – 24" IPS   4" IPS DR 7 - 11 x 3" – 24" IPS   6" IPS DR 11 x 8" – 24" IPS  

End Cap
2", 3" IPS SDR 7 – 11   4", 6", 8" IPS SDR 7 - 11  

Flange Adapter
1 1/2" IPS DR 9   2", 3" IPS DR 7 - 9   4", 6", 8", 10", 12", 14" IPS DR 7 - 11   16" IPS DR 9 - 11  
18" DR IPS 11 - 11  

Reducer Coupling
2" x 1 1/2" IPS DR 9   3" x 2" IPS DR 7 - 9   4" x 2" IPS DR 7 - 11   4" x 3" IPS DR 7 - 11  
6" x 4" IPS DR 7 - 11   8" x 6" IPS DR 7 - 11  

Tee
1" IPS DR 9   2", 3" IPS DR 7 - 9   4", 6", 8" IPS DR 7 - 11  

! Product may or may not bear the NSF U.P. Code marking.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
^ Applies to DR 9 and 11 only.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    


Facility : Hagerstown, MD

Gas Applications - Pipe and Fittings

Product Type   Material Type   Trade Name   Product Standard

Pipe# % * §
 
PE 2406/2708
 
DriscoPlex® 6500
 
ASTM D2513
1/2" - 12"

# All sizes between 1/2" and 12" with a DR of 11 or thinner are Certified.
% Only those products identified in Listing are Certified.
* Gas pipe and tubing limited to outside underground use only.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.

Pipe# % * §
 
PE 4710
 
Driscopipe® 8100
 
ASTM D2513
1/2" - 12"

# All sizes between 1/2" and 12" with a DR of 11 or thinner are Certified.
% Only those products identified in Listing are Certified.
* Gas pipe and tubing limited to outside underground use only.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.

Pipe# % * §
 
PE 4710
 
YELLOWSTRIPE® 8300
 
ASTM D2513
1/2" - 12"

# All sizes between 1/2" and 12" with a DR of 11 or thinner are Certified.
% Only those products identified in Listing are Certified.
* Gas pipe and tubing limited to outside underground use only.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.

Pipe% * ¢ § [1]
 
PE 4710
 
DriscoPlex 8400
 
ASTM D2513
1/2" - 10"

% Only those products identified in Listing are Certified.
* Gas pipe and tubing limited to outside underground use only.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
[1] All sizes between 1/2" and 10" with a DR of 11 or thinner are Certified.


Potable Water - Pipe and Fittings

Product Type   Material Type   Trade Name   Product Standard

Pipe* + [G]
 
PE 4710
 
DriscoPlex PW
 
ASTM D3035
1/2" DR 7[1]

3/4" - 3" DR 7
3" DR 7.3[1] [2]

3" DR 8.3[1] [2]

1/2" DR 9[1]

3/4" - 3" DR 9
3" DR 9.3[1] [2]

1/2" - 3" DR 11[1]

1/2" - 3" DR 13.5[1]

3/4" - 3" DR 15.5[1]

3/4" - 3" DR 17[1]

1" - 3" DR 21[1]

1" - 3" DR 26[1]

1 1/2" - 3" DR 32.5[1]

3" DR 41[1] [2]

[1] These pipe sizes are not certified for use in potable water applications containing
    oxidizing disinfectants and shall not be marked with a CC oxidative resistance
    classification.
[1] These pipe sizes are not certified for use in potable water applications containing
    oxidizing disinfectants and shall not be marked with a CC oxidative resistance
    classification.
[2] Special sizes may be acceptable for engineered applications, due to system conditions or
    special local requirements. It is the responsibility of the end user to ensure the
    product is suitable for the intended application.
* Trade name may be followed by 1000, 1100, 1500, 1600, 4000, 4100 or 5100.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Pipe* + [G]
 
PE 4710
 
DriscoPlex PW
 
ASTM F714
4" - 26" IPS SDR 7
4" - 18" IPS SDR 7.3
4" - 20" IPS SDR 8.3[2]

4" - 20", 22", 24" IPS SDR 9
4"- 20", 22" - 30" IPS SDR 9.3[2]

4" - 20", 22" - 36" IPS SDR 11
4" - 36" IPS SDR 13.5
4" - 48" IPS SDR 15.5[2]

4" - 54" IPS SDR 17
4" - 54" IPS SDR 21
4" - 54" IPS SDR 26
4" - 54" IPS SDR 32.5
4" - 54" IPS SDR 41

[2] Special sizes may be acceptable for engineered applications, due to system conditions or
    special local requirements. It is the responsibility of the end user to ensure the
    product is suitable for the intended application.
* Trade name may be followed by 1000, 1100, 1500, 1600, 4000, 4100 or 5100.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Pipe
 
PE4710
 
DriscoPlex PW
 
AWWA C906
4" - 26" IPS DR 7
4" - 63" IPS DR 7.3[2]

4" - 34" IPS DR 9
36" - 63" IPS DR 9[2]

4" - 63" IPS DR 9.3[2]

4" - 42" IPS DR 11
48" - 63" IPS DR 11[2]

4" - 48" IPS DR 13.5
54" - 63" IPS DR 13.5[2]

4" - 63" IPS DR 15.5[2]

4" - 63" IPS DR 17
4" - 63" IPS DR 21
4" - 63" IPS DR 26[2]

4" - 63" IPS DR 32.5[2]

[2] Special sizes may be acceptable for engineered applications, due to system conditions or
    special local requirements. It is the responsibility of the end user to ensure the
    product is suitable for the intended application.

Pipe* + [G]
 
PE 4710
 
DriscoPlex PW
 
AWWA C901
1 1/4" - 3" SDR 9

* Trade name may be followed by 1000, 1100, 1500, 1600, 4000, 4100 or 5100.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    


Facility : Reno, NV

Gas Applications - Pipe and Fittings

Product Type   Material Type   Trade Name   Product Standard

Pipe# % * §
 
PE 2406/2708
 
DriscoPlex® 6500
 
ASTM D2513
1/2" - 12"

# All sizes between 1/2" and 12" with a DR of 11 or thinner are Certified.
% Only those products identified in Listing are Certified.
* Gas pipe and tubing limited to outside underground use only.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.

Pipe% * ¢
 
PE 2406/2708
 
DriscoPlex® 6500
 
CSA B137.4
1/2" - 10" SDR 8.8
1/2" - 10" SDR 10
1/2" - 12" SDR 11
1/2" - 12" SDR 13.5
1/2" - 12" SDR 17
1/2" - 12" SDR 21

% Only those products identified in Listing are Certified.
* Gas pipe and tubing limited to outside underground use only.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.

Pipe% * ¢
 
PE 2708
 
DriscoPlex® 7500
 
CSA B137.4
1/2” – 8” SDR 8.8
1/2” – 8” SDR 10
1/2" - 10" SDR 11
1/2” – 12" SDR 13.5
1/2” – 12" SDR 17
1/2” – 12" SDR 21

% Only those products identified in Listing are Certified.
* Gas pipe and tubing limited to outside underground use only.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.

Pipe% * ¢
 
PE 4710
 
Driscopipe® 8100
 
CSA B137.4
1/2" - 10" SDR 8.8
1/2" - 10" SDR 10
1/2" - 12" SDR 11
1/2" - 12" SDR 13.5
1/2" - 12" SDR 17
1/2" - 12" SDR 21

% Only those products identified in Listing are Certified.
* Gas pipe and tubing limited to outside underground use only.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.

Pipe# % * §
 
PE 4710
 
YELLOWSTRIPE® 8300
 
ASTM D2513
1/2" - 10"

# All sizes between 1/2" and 12" with a DR of 11 or thinner are Certified.
% Only those products identified in Listing are Certified.
* Gas pipe and tubing limited to outside underground use only.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.

Pipe% * ¢
 
PE 4710
 
YELLOWSTRIPE® 8300
 
CSA B137.4
1/2" - 10" SDR 8.8
1/2" - 10" SDR 10
1/2" - 12" SDR 11
1/2" - 12" SDR 13.5
1/2" - 12" SDR 17
1/2" - 12" SDR 21

% Only those products identified in Listing are Certified.
* Gas pipe and tubing limited to outside underground use only.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.

Pipe% * ¢ § [1]
 
PE 4710
 
DriscoPlex 8400
 
ASTM D2513
1/2" - 10"

% Only those products identified in Listing are Certified.
* Gas pipe and tubing limited to outside underground use only.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
[1] All sizes between 1/2" and 10" with a DR of 11 or thinner are Certified.

Pipe% * ¢
 
PE 4710
 
DriscoPlex 8400
 
CSA B137.4
1/2" - 10" SDR 11
1/2" - 10" SDR 13.5
1/2" - 10" SDR 17
1/2" - 10" SDR 21

% Only those products identified in Listing are Certified.
* Gas pipe and tubing limited to outside underground use only.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.


Facility : Pryor, OK

Gas Applications - Pipe and Fittings

Product Type   Material Type   Trade Name   Product Standard

Pipe# % * §
 
PE 2406/2708
 
DriscoPlex® 6500
 
ASTM D2513
1/2" - 12"

# All sizes between 1/2" and 12" with a DR of 11 or thinner are Certified.
% Only those products identified in Listing are Certified.
* Gas pipe and tubing limited to outside underground use only.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.

Pipe% * ¢
 
PE 2406/2708
 
DriscoPlex® 6500
 
CSA B137.4
1/2" - 10" SDR 8.8
1/2" - 10" SIDR 10
1/2" - 12" SDR 11
1/2" - 12" SDR 13.5
1/2" - 12" SDR 17
1/2" - 12" SDR 21

% Only those products identified in Listing are Certified.
* Gas pipe and tubing limited to outside underground use only.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.

Pipe% * ¢
 
PE 2708
 
DriscoPlex® 7500
 
CSA B137.4
1/2” – 8” SDR 8.8
1/2” – 8” SDR 10
1/2” – 10” SDR 11
1/2” – 12” SDR 13.5
1/2” – 12” SDR 17
1/2” – 12” SDR 21

% Only those products identified in Listing are Certified.
* Gas pipe and tubing limited to outside underground use only.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.

Pipe# % * §
 
PE 4710
 
Driscopipe® 8100
 
ASTM D2513
1/2" - 12"

# All sizes between 1/2" and 12" with a DR of 11 or thinner are Certified.
% Only those products identified in Listing are Certified.
* Gas pipe and tubing limited to outside underground use only.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.

Pipe% * ¢
 
PE 4710
 
Driscopipe® 8100
 
CSA B137.4
1/2" - 10" SDR 8.8
1/2" - 10" SDR 10
1/2" - 12" SDR 11
1/2" - 12" SDR 13.5
1/2" - 12" SDR 17
1/2" - 12" SDR 21

% Only those products identified in Listing are Certified.
* Gas pipe and tubing limited to outside underground use only.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.

Pipe# % * §
 
PE 4710
 
YELLOWSTRIPE® 8300
 
ASTM D2513
1/2" - 12"

# All sizes between 1/2" and 12" with a DR of 11 or thinner are Certified.
% Only those products identified in Listing are Certified.
* Gas pipe and tubing limited to outside underground use only.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.

Pipe% * ¢
 
PE 4710
 
YELLOWSTRIPE® 8300
 
CSA B137.4
1/2" - 10" SDR 8.8
1/2" - 10" SDR 10
1/2" - 12" SDR 11
1/2" - 12" SDR 13.5
1/2" - 12" SDR 17
1/2" - 12" SDR 21

% Only those products identified in Listing are Certified.
* Gas pipe and tubing limited to outside underground use only.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.

Pipe% * ¢ § [1]
 
PE 4710
 
DriscoPlex 8400
 
ASTM D2513
1/2" - 10"

% Only those products identified in Listing are Certified.
* Gas pipe and tubing limited to outside underground use only.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
[1] All sizes between 1/2" and 10" with a DR of 11 or thinner are Certified.

Pipe% * ¢
 
PE 4710
 
DriscoPlex 8400
 
CSA B137.4
1/2" - 10" SDR 11
1/2" - 10" SDR 13.5
1/2" - 10" SDR 17
1/2" - 10" SDR 21

% Only those products identified in Listing are Certified.
* Gas pipe and tubing limited to outside underground use only.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.


Facility : Knoxville, TN

Gas Applications - Pipe and Fittings

Product Type   Material Type   Trade Name   Product Standard

Pipe# % * §
 
PE 2406/2708
 
DriscoPlex® 6500
 
ASTM D2513
1/2" - 12"

# All sizes between 1/2" and 12" with a DR of 11 or thinner are Certified.
% Only those products identified in Listing are Certified.
* Gas pipe and tubing limited to outside underground use only.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.

Pipe% * ¢
 
PE 2406/2708
 
DriscoPlex® 6500
 
CSA B137.4
1/2" - 10" SDR 8.8
1/2" - 10" SDR 10
1/2" - 12" SDR 11
1/2" - 12" SDR 13.5
1/2" - 12" SDR 17
1/2" - 12" SDR 21

% Only those products identified in Listing are Certified.
* Gas pipe and tubing limited to outside underground use only.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.

Pipe% * ¢
 
PE 2708
 
DriscoPlex® 7500
 
CSA B137.4
1/2" – 8” SDR 8.8
1/2" – 8” SDR 10
1/2" – 10” SDR 11
1/2" – 12” SDR 13.5
1/2" – 12” SDR 17
1/2" – 12” SDR 21

% Only those products identified in Listing are Certified.
* Gas pipe and tubing limited to outside underground use only.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.

Pipe# % * §
 
PE 4710
 
Driscopipe® 8100
 
ASTM D2513
1/2" - 12"

# All sizes between 1/2" and 12" with a DR of 11 or thinner are Certified.
% Only those products identified in Listing are Certified.
* Gas pipe and tubing limited to outside underground use only.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.

Pipe% * ¢
 
PE 4710
 
Driscopipe® 8100
 
CSA B137.4
1/2" - 10" SDR 8.8
1/2" - 10" SDR 10
1/2" - 12" SDR 11
1/2" - 12" SDR 13.5
1/2" - 12" SDR 17
1/2" - 12" SDR 21

% Only those products identified in Listing are Certified.
* Gas pipe and tubing limited to outside underground use only.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.

Pipe# % * §
 
PE 4710
 
YELLOWSTRIPE® 8300
 
ASTM D2513
1/2" - 12"

# All sizes between 1/2" and 12" with a DR of 11 or thinner are Certified.
% Only those products identified in Listing are Certified.
* Gas pipe and tubing limited to outside underground use only.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.

Pipe% * ¢
 
PE 4710
 
YELLOWSTRIPE® 8300
 
CSA B137.4
1/2" - 10" SDR 8.8
1/2" - 10" SDR 10
1/2" - 12" SDR 11
1/2" - 12" SDR 13.5
1/2" - 12" SDR 17
1/2" - 12" SDR 21

% Only those products identified in Listing are Certified.
* Gas pipe and tubing limited to outside underground use only.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.

Pipe% * ¢ § [1]
 
PE 4710
 
DriscoPlex 8400
 
ASTM D2513
1/2" - 10"

% Only those products identified in Listing are Certified.
* Gas pipe and tubing limited to outside underground use only.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
[1] All sizes between 1/2" and 10" with a DR of 11 or thinner are Certified.

Pipe% * ¢
 
PE 4710
 
DriscoPlex 8400
 
CSA B137.4
1/2" - 10" SDR 11
1/2" - 10" SDR 13.5
1/2" - 10" SDR 17
1/2" - 10" SDR 21

% Only those products identified in Listing are Certified.
* Gas pipe and tubing limited to outside underground use only.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.


Facility : Brownwood, TX

Gas Applications - Pipe and Fittings

Product Type   Material Type   Trade Name   Product Standard

Pipe% * ¢ § [1]
 
PE 4710
 
DriscoPlex 8400
 
ASTM D2513
1/2" - 10"

% Only those products identified in Listing are Certified.
* Gas pipe and tubing limited to outside underground use only.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
[1] All sizes between 1/2" and 10" with a DR of 11 or thinner are Certified.

Pipe% * ¢
 
PE 4710
 
DriscoPlex 8400
 
CSA B137.4
1/2" - 10" SDR 17
1/2" - 10" SDR 13.5
1/2" - 10" SDR 21
1/2" - 10" SDR 11

% Only those products identified in Listing are Certified.
* Gas pipe and tubing limited to outside underground use only.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.

Pipe# % * §
 
PE 4710
 
YELLOWSTRIPE® 8300
 
ASTM D2513
1/2" - 12"

# All sizes between 1/2" and 12" with a DR of 11 or thinner are Certified.
% Only those products identified in Listing are Certified.
* Gas pipe and tubing limited to outside underground use only.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.


Number of matching Manufacturers is 1
Number of matching Products is 501
Processing time was 1 seconds