NSF Product and Service Listings

These NSF Official Listings are current as of Sunday, May 19, 2024 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.

Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/Plumbing/Listings.asp?CompanyName=National+Association&

Did you know?

The new NSF Product Listings website is available for NSF/ANSI 14-Certified products with a new look and feel. Click on "Try it Now" to check it out!
Fabricated Ductile Iron Pipe
NAPF QualityPlus™ Certification Program


 
National Association of Pipe Fabricators 
2313 Northeast 160th Loop
Vancouver, WA 98684 
United States 
205-706-0886
Visit this company's website

Facility : # 11 Exeter Supply, USA
Product Type   Material Type   Trade Name   Product Standard

Pipe		  
Ductile Iron		  
Exeter Supply		  
AWWA C115

Flanged Ductile Iron Pipe
3" - 64"  

Pipe		  
Ductile Iron		  
Exeter Supply		  
AWWA C606

Grooved / Shouldered Joint Pipe
3" - 64"   

NOTE: Certification applies to grooved and/or flanged pipe only. Certification does not cover
      the design or rating of couplings or hydrostatic joint tests. Pipe may be flanged on one
      end and grooved on the other.  In this case, pipe is Certified to both AWWA C115 and
      AWWA C606.
NOTE: Product has not been evaluated to NSF/ANSI/CAN 61 for drinking water applications.

Facility : # 18 Plant and Flanged Equipment Co., USA
Product Type   Material Type   Trade Name   Product Standard

Pipe		  
Ductile Iron		  
Plant & Flanged		  
AWWA C115

Flanged Ductile Iron Pipe
3" - 64"  

Pipe		  
Ductile Iron		  
Piping Systems		  
AWWA C606

Grooved / Shouldered Joint Pipe
3" - 64"   

NOTE: Product has not been evaluated to NSF/ANSI/CAN 61 for drinking water applications.
NOTE: Certification applies to grooved and/or flanged pipe only. Certification does not cover
      the design or rating of couplings or hydrostatic joint tests. Pipe may be flanged on one
      end and grooved on the other.  In this case, pipe is Certified to both AWWA C115 and
      AWWA C606.

Facility : # 19 Quality Water Products, USA
Product Type   Material Type   Trade Name   Product Standard

Pipe		  
Ductile Iron		  
Quality Water Products		  
AWWA C115

Flanged Ductile Iron Pipe
3" - 64"  

Pipe		  
Ductile Iron		  
Quality Water Products		  
AWWA C606

Grooved / Shouldered Joint Pipe
3" - 64"   

NOTE: Certification applies to grooved and/or flanged pipe only. Certification does not cover
      the design or rating of couplings or hydrostatic joint tests. Pipe may be flanged on one
      end and grooved on the other.  In this case, pipe is Certified to both AWWA C115 and
      AWWA C606.
NOTE: Product is also Certified to NSF/ANSI/CAN 61 for drinking water applications.

Facility : # 21 Utility Equipment Co., USA
Product Type   Material Type   Trade Name   Product Standard

Pipe		  
Ductile Iron		  
Utility Equipment		  
AWWA C115

Flanged Ductile Iron Pipe
3" - 24"  

Pipe		  
Ductile Iron		  
Utility Equipment		  
AWWA C606

Grooved / Shouldered Joint Pipe
3" - 24"   

NOTE: Product is also Certified to NSF/ANSI/CAN 61 for drinking water applications.
NOTE: Certification applies to grooved and/or flanged pipe only. Certification does not cover
      the design or rating of couplings or hydrostatic joint tests. Pipe may be flanged on one
      end and grooved on the other.  In this case, pipe is Certified to both AWWA C115 and
      AWWA C606.

Facility : U.S. Pipe Fabrication Bessemer, AL
Product Type   Material Type   Trade Name   Product Standard

Pipe		  
Ductile Iron		  
U.S. Pipe		  
AWWA C115

Flanged Ductle Iron Pipe
3" - 64"  

Pipe		  
Ductile Iron		  
U.S. Pipe		  
AWWA C606

Grooved / Shouldered Joint Pipe
3" - 64"   

NOTE: Certification applies to grooved and/or flanged pipe only. Certification does not cover
      the design or rating of couplings or hydrostatic joint tests. Pipe may be
      flanged on one end and grooved on the other. In this case, pipe is Certified to both
      AWWA C115 and AWWA C606.
NOTE: 12" - 64" product is also Certified to NSF/ANSI/CAN 61 for drinking water applications.

Facility : U.S. Pipe Fabrication Phoenix, AZ
Product Type   Material Type   Trade Name   Product Standard

Pipe		  
Ductile Iron		  
U.S. Pipe		  
AWWA C115

Flanged Ductle Iron Pipe
3" - 64"  

Pipe		  
Ductile Iron		  
U.S. Pipe		  
AWWA C606

Grooved / Shouldered Joint Pipe
3" - 64"   

NOTE: Certification applies to grooved and/or flanged pipe only. Certification does not cover
      the design or rating of couplings or hydrostatic joint tests. Pipe may be
      flanged on one end and grooved on the other. In this case, pipe is Certified to both
      AWWA C115 and AWWA C606.
NOTE: Product is also Certified to NSF/ANSI/CAN 61 for drinking water applications.

Facility : U.S. Pipe Fabrication Olivehurst, CA
Product Type   Material Type   Trade Name   Product Standard

Pipe		  
Ductile Iron		  
U.S. Pipe		  
AWWA C115

Flanged Ductle Iron Pipe
3" - 64"  

Pipe		  
Ductile Iron		  
U.S. Pipe		  
AWWA C606

Grooved / Shouldered Joint Pipe
3" - 64"   

NOTE: Certification applies to grooved and/or flanged pipe only. Certification does not cover
      the design or rating of couplings or hydrostatic joint tests. Pipe may be
      flanged on one end and grooved on the other. In this case, pipe is Certified to both
      AWWA C115 and AWWA C606.
NOTE: Product is also Certified to NSF/ANSI/CAN 61 for drinking water applications.

Facility : U.S. Pipe Fabrication Orlando, FL
Product Type   Material Type   Trade Name   Product Standard

Pipe		  
Ductile Iron		  
U.S. Pipe		  
AWWA C115

Flanged Ductile Iron Pipe
3" - 64"  

Pipe		  
Ductile Iron		  
U.S. Pipe		  
AWWA C606

Iron Pipe
3" - 64"   

NOTE: Certification applies to grooved and/or flanged pipe only. Certification does not cover
      the design or rating of couplings or hydrostatic joint tests. Pipe may be flanged on one
      end and grooved on the other. In this case, pipe is Certified to both AWWA C115 and AWWA
      C606.
NOTE: Product is also Certified to NSF/ANSI/CAN 61 for drinking water applications.

Facility : U.S. Pipe Fabrication Gainesville, GA
Product Type   Material Type   Trade Name   Product Standard

Pipe		  
Ductile Iron		  
U.S. Pipe		  
AWWA C115

Flanged Ductle Iron Pipe
3" - 64"  

Pipe		  
Ductile Iron		  
U.S. Pipe		  
AWWA C606

Grooved / Shouldered Joint Pipe
3" - 64"   

NOTE: Product is also Certified to NSF/ANSI/CAN 61 for drinking water applications.
NOTE: Certification applies to grooved and/or flanged pipe only. Certification does not cover
      the design or rating of couplings or hydrostatic joint tests. Pipe may be
      flanged on one end and grooved on the other. In this case, pipe is Certified to both
      AWWA C115 and AWWA C606.

Facility : U.S. Pipe Fabrication Ottawa, KS
Product Type   Material Type   Trade Name   Product Standard

Pipe		  
Ductile Iron		  
U.S. Pipe		  
AWWA C115

Flanged Ductle Iron Pipe
3" - 64"  

Pipe		  
Ductile Iron		  
U.S. Pipe		  
AWWA C606

Grooved / Shouldered Joint Pipe
3" - 64"   

NOTE: Product is also Certified to NSF/ANSI/CAN 61 for drinking water applications.
NOTE: Certification applies to grooved and/or flanged pipe only. Certification does not cover
      the design or rating of couplings or hydrostatic joint tests. Pipe may be
      flanged on one end and grooved on the other. In this case, pipe is Certified to both
      AWWA C115 and AWWA C606.

Facility : M & E Manufacturing Grand Rapids, MI
Product Type   Material Type   Trade Name   Product Standard

Pipe		  
Ductile Iron		  
M&E Manufacturing		  
AWWA C115

Flanged Ductile Iron Pipe
3" - 42"  

Pipe		  
Ductile Iron		  
M&E Manufacturing		  
AWWA C606

Flanged Ductile Iron Pipe
3" - 42"   

NOTE: Product is Certified to NSF/ANSI/CAN 61 for drinking water applications.
NOTE: Certification applies to grooved and/or flanged pipe only. Certification does not cover
      the design or rating of couplings or hydrostatic joint tests. Pipe may be flanged on one
      end and grooved on the other. In this case, pipe is Certified to both AWWA C115 and AWWA
      C606.

Facility : U.S. Pipe Fabrication Rogers, MN
Product Type   Material Type   Trade Name   Product Standard

Pipe		  
Ductile Iron		  
U.S. Pipe		  
AWWA C115

Flanged Ductile Iron Pipe
3" - 64"  

Pipe		  
Ductile Iron		  
U.S. Pipe		  
AWWA C606

Grooved / Shouldered Joint Pipe
3" - 64"   

NOTE: Certification applies to grooved and/or flanged pipe only. Certification does not cover
      the design or rating of couplings or hydrostatic joint tests. Pipe may be flanged on one
      end and grooved on the other.  In this case, pipe is Certified to both AWWA C115 and
      AWWA C606.
NOTE: Product is also Certified to NSF/ANSI/CAN 61 for drinking water applications.

Facility : U.S. Pipe Fabrication Warren, OR
Product Type   Material Type   Trade Name   Product Standard

Pipe		  
Ductile Iron		  
U.S. Pipe		  
AWWA C115

Flanged Ductle Iron Pipe
3" - 64"  

Pipe		  
Ductile Iron		  
U.S. Pipe		  
AWWA C606

Grooved / Shouldered Joint Pipe
3" - 64"   

NOTE: Certification applies to grooved and/or flanged pipe only. Certification does not cover
      the design or rating of couplings or hydrostatic joint tests. Pipe may be
      flanged on one end and grooved on the other. In this case, pipe is Certified to both
      AWWA C115 and AWWA C606.
NOTE: Product is also Certified to NSF/ANSI/CAN 61 for drinking water applications.

Facility : U.S. Pipe Fabrication Ephrata, PA
Product Type   Material Type   Trade Name   Product Standard

Pipe		  
Ductile Iron		  
U.S. Pipe		  
AWWA C115

Flanged Ductle Iron Pipe
3" - 64"  

Pipe		  
Ductile Iron		  
U.S. Pipe		  
AWWA C606

Grooved / Shouldered Joint Pipe
3" - 64"   

NOTE: Certification applies to grooved and/or flanged pipe only. Certification does not cover
      the design or rating of couplings or hydrostatic joint tests. Pipe may be
      flanged on one end and grooved on the other. In this case, pipe is Certified to both
      AWWA C115 and AWWA C606.
NOTE: Product is also Certified to NSF/ANSI/CAN 61 for drinking water applications.

Facility : U.S. Pipe Fabrication San Antonio, TX
Product Type   Material Type   Trade Name   Product Standard

Pipe		  
Ductile Iron		  
U.S. Pipe		  
AWWA C115

Flanged Ductle Iron Pipe
3" - 64"  

Pipe		  
Ductile Iron		  
U.S. Pipe		  
AWWA C606

Grooved / Shouldered Joint Pipe
3" - 64"   

NOTE: 3" - 54" product is also Certified to NSF/ANSI/CAN 61 for drinking water applications.
NOTE: Certification applies to grooved and/or flanged pipe only. Certification does not cover
      the design or rating of couplings or hydrostatic joint tests. Pipe may be
      flanged on one end and grooved on the other. In this case, pipe is Certified to both
      AWWA C115 and AWWA C606.
Number of matching Manufacturers is 1
Number of matching Products is 30
Processing time was 1 seconds