NSF Product and Service Listings
These NSF Official Listings are current as of Saturday, August 31, 2024 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.
Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/Plumbing/Listings.asp?MaterialType=PEX&
Plastics Piping System Components and Related Materials
Click here for a list of End Use Code Designations.
Click on Product Standards or footnote in blue to view the referenced document
Alro Products International | |
2348 Linden Boulevard | |
Brooklyn | |
New York, NY 11208 | |
United States | |
718-566-1000 | |
Visit this company's website |
Facility : Barcelona, Spain
Product Type | Material Type | Trade Name | Product Standard | |||
Pipe* @ ¢ § +++ [G] |
PEX 5106 |
ALROPEX |
ASTM F876/F877 |
|||
3/8" - 2" | ||||||
* Natural (Solid Wall) PEX Pipe Certified 3/8" - 2" sizes. Red, blue, white or orange PEX pipe (2 layer pipe - natural with colored adhesive pipe) certified for 3/8" - 1" sizes. Tubing certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked, as applicable, with the following fitting system designation(s): ASTM F1960, ASTM F1807, ASTM F2159, and ASTM F2098. @ PEX 5106: Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Pipe* @ ¢ § +++ [G] |
PEX 5106 |
ALROPEX |
CSA B137.5 |
|||
3/8" - 2" | ||||||
* Natural (Solid Wall) PEX Pipe Certified 3/8" - 2" sizes. Red, blue, white or orange PEX pipe (2 layer pipe - natural with colored adhesive pipe) certified for 3/8" - 1" sizes. Tubing certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked, as applicable, with the following fitting system designation(s): ASTM F1960, ASTM F1807, ASTM F2159, and ASTM F2098. @ PEX 5106: Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or documentation shipped with the product are Certified.
Product Type | Material Type | Trade Name | Product Standard | |||
Tubing* @ ¢ § |
PEX 5106 |
ALROPEX |
ASTM F876/F877 |
|||
3/8" - 2" | ||||||
* Monowall pipe (natural); Skinned pipe (red, blue, white and orange); and Barrier pipe (red, blue,white and orange) are certified for the following sizes: 3/8", 1/2", 5/8", 3/4", 1'', 1 1/2", & 2". Tubing certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked, as applicable with the following fitting system designation(s): ASTM F1960, ASTM F1807, ASTM F2159, and ASTM F2098. @ This tubing product has been evaluated against the performance requirements of ASTM F876/877 and CSA B137.5. This product is not NSF Certified for use in a potable water distribution system. This product has been evaluated for use in radiant floor heating, (NSF-rfh), applications only. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
||||||
Tubing* @ ¢ § |
PEX 5106 |
ALROPEX |
CSA B137.5 |
|||
3/8" - 2" | ||||||
* Monowall pipe (natural); Skinned pipe (red, blue, white and orange); and Barrier pipe (red, blue,white and orange) are certified for the following sizes: 3/8", 1/2", 5/8", 3/4", 1'', 1 1/2", & 2". Tubing certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked, as applicable with the following fitting system designation(s): ASTM F1960, ASTM F1807, ASTM F2159, and ASTM F2098. @ This tubing product has been evaluated against the performance requirements of ASTM F876/877 and CSA B137.5. This product is not NSF Certified for use in a potable water distribution system. This product has been evaluated for use in radiant floor heating, (NSF-rfh), applications only. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
ATI Systems, Inc. | |
4339 Main Street | |
Conestoga, PA 17516 | |
United States | |
717-871-9851 | |
Visit this company's website |
Facility : Guangdong, China
Product Type | Material Type | Trade Name | Product Standard | |||
Tubing$ * § |
PEX 5006 |
American Hydronics |
ASTM F876/F877 |
|||
>= 1/8" SDR 9 | ||||||
$ Certified for natural, orange, red, and white with oxygen barrier. * Accepted by NSF for use in residential and commercial construction, including manufactured housing. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
||||||
Tubing$ * ¢ § [1] |
PEX |
American Hydronics |
CSA B137.5 |
|||
>= 1/8" SDR 9 | ||||||
$ Certified for natural, orange, red, and white with oxygen barrier. * Accepted by NSF for use in residential and commercial construction, including manufactured housing. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [1] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked with the following fitting system designations: ASTM F1807, ASTM F2159, ASTM F1960, F2098. |
||||||
Tubing* ^ ¢ ~ +++ [G] |
PEX 5006 |
American Hydronics |
ASTM F876/F877 |
|||
1/8" - 3" | ||||||
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. ~ Certified for Natural non-barrier single layer tubing for 1/8 - 3" sizes. Certified for red, white, blue 2-layer tubing for 1/2", 5/8", 3/4", 1" sizes only. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Tubing* ^ ¢ ~ +++ [G] [1] |
PEX 5006 |
American Hydronics |
CSA B137.5 |
|||
1/8" - 3" | ||||||
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. ~ Certified for Natural non-barrier single layer tubing for 1/8 - 3" sizes. Certified for red, white, blue 2-layer tubing for 1/2", 5/8", 3/4", 1" sizes only. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. [1] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked with the following fitting system designations: ASTM F1807, ASTM F2159, ASTM F1960, F2098. |
Auray Managing, S.L.U. | |
P.I. Riera de Caldes | |
Carrer dels Mercaders, 42, Palau-solità | |
i Plegamans, Barcelona 08184 | |
Spain | |
34 93 748 10 36 | |
Visit this company's website |
Facility : Barcelona, Spain
Product Type | Material Type | Trade Name | Product Standard | |||
Pipe* @ ¢ § +++ [G] |
PEX 5106 |
PIPEX |
ASTM F876/F877 |
|||
3/8" - 2" | ||||||
* Monowall pipe (natural), Skinned pipe (red, blue, white and orange), and Skinned (black plus red, blue, white, or orange) are certified for the following sizes: 3/8", 1/2", 5/8", 3/4", 1", 1-1/4", 1-1/2" and 2". Tubing certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked, as applicable with the following fitting system designation(s): ASTM F1960, ASTM F1807, ASTM F2159, and ASTM F2098. @ PEX 5106: Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Pipe* @ ¢ § +++ [G] |
PEX 5106 |
PIPEX |
CSA B137.5 |
|||
3/8" - 2" | ||||||
* Monowall pipe (natural), Skinned pipe (red, blue, white and orange), and Skinned (black plus red, blue, white, or orange) are certified for the following sizes: 3/8", 1/2", 5/8", 3/4", 1", 1-1/4", 1-1/2" and 2". Tubing certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked, as applicable with the following fitting system designation(s): ASTM F1960, ASTM F1807, ASTM F2159, and ASTM F2098. @ PEX 5106: Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or documentation shipped with the product are Certified.
Product Type | Material Type | Trade Name | Product Standard | |||
Tubing* @ ¢ § |
PEX 5106 |
PIPEX |
ASTM F876/F877 |
|||
3/8" - 2" | ||||||
* Monowall pipe (natural); Skinned pipe (red, blue, white and orange); Skinned (black plus red, blue, white, or orange), and Barrier pipe (red, blue, white and orange) are certified for the following sizes: 3/8", 1/2", 5/8", 3/4", 1", 1-1/4", 1-1/2" & 2". Tubing certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked, as applicable with the following fitting system designation(s): ASTM F1960, ASTM F1807, ASTM F2159, and ASTM F2098. @ This tubing product has been evaluated against the performance requirements of ASTM F876/877 and CSA B137.5. This product is not NSF Certified for use in a potable water distribution system. This product has been evaluated for use in radiant floor heating, (NSF-rfh), applications only. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
||||||
Tubing* @ ¢ § |
PEX 5106 |
PIPEX |
CSA B137.5 |
|||
3/8" - 2" | ||||||
* Monowall pipe (natural); Skinned pipe (red, blue, white and orange); Skinned (black plus red, blue, white, or orange), and Barrier pipe (red, blue, white and orange) are certified for the following sizes: 3/8", 1/2", 5/8", 3/4", 1", 1-1/4", 1-1/2" & 2". Tubing certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked, as applicable with the following fitting system designation(s): ASTM F1960, ASTM F1807, ASTM F2159, and ASTM F2098. @ This tubing product has been evaluated against the performance requirements of ASTM F876/877 and CSA B137.5. This product is not NSF Certified for use in a potable water distribution system. This product has been evaluated for use in radiant floor heating, (NSF-rfh), applications only. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or documentation shipped with the product are Certified.
Borealis AB | |
SE 444 86 Stenungsund | |
Sweden | |
46 303 860 00 | |
Visit this company's website |
Facility : Stenungsund, Sweden
Material Type | End Use | Trade Name | Product Standard |
PEX 5006* ^ +++ | 1 | HE1878E-C2 | N/A |
PEX 5106* ^ +++ | 1 | HE1878E-C3 | N/A |
# Meets the chlorine resistance requirements of CC3 in Table 2 of ASTM D3350 when tested in accordance with ASTM F2263. * Use of this material in NSF Certified tubing requires NSF's prior authorization. Tubing produced from this material was tested to the performance requirements of ASTM F876. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). |
Material Type | End Use | Trade Name | Product Standard |
PEX 5006* | 1 | HE1878E-C2 | N/A |
PEX 5106* | 1 | HE1878E-C3 | N/A |
* Use of this material in NSF Certified tubing requires NSF's prior authorization. Tubing produced from this material was tested to the performance requirements of ASTM F876. |
NSF Certified materials and generic ingredients are exempt from bearing an NSF Certification Mark. Certified materials and generic ingredients are identified by the manufacturer name, facility location, and trade designation as shown in the Official Listing.
Bow Plumbing Group, Inc. | ![]() |
5700 Cote de Liesse | |
Montreal, QC H4T 1B1 | |
Canada | |
450-372-5481 | |
Visit this company's website |
Facility : # 2 Granby, Quebec, Canada
Product Type | Material Type | Trade Name | Product Standard | |||
Tubing# [1] |
PEX |
Bowpex |
ASTM E84 |
|||
1/2" (without insulation) | ||||||
# Certified Bowpex tubing is natural, red, blue or white. [1] Flame Spread Index <=25, Smoke Developed Index <=50. Flame Spread Index and Smoke Developed Index for ASTM E84 is based on minimum spacing of 18 inches between tubing runs. Tubing shall be marked [cNSFus® fs ASTM E84 ULC S102.2 FS25/SD50]. |
||||||
Tubing# ¢ [2] |
PEX |
Bowpex |
CAN/ULC S102.2 |
|||
1/2" (without insulation) | ||||||
# Certified Bowpex tubing is natural, red, blue or white. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. [2] Flame Spread Value <=25, Smoke Developed Value <=50. Tubing shall be marked [cNSFus® fs ASTM E84 ULC S102.2 FS25/SD50]. |
||||||
Tubing# ¢ [3] |
PEX |
Bowpex |
CAN/ULC S102.2 |
|||
1/8", 1/4", 3/8", 3/4", 1" (with insulation) | ||||||
# Certified Bowpex tubing is natural, red, blue or white. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. [3] Flame Spread Value <=25, Smoke Developed Value <=50. The Flame Spread Value and Smoke Developed Value is based on when tubing is field insulated with 1/2" JM Microlok HP Hi performance fiberglass insulation as per Bow installation instructions. Tubing shall be marked [cNSF®-fs ULCS102.2 FS25/SD50]. |
||||||
Tubing% [1] |
PEX |
Oxypex |
ASTM E84 |
|||
1/2" (without insulation) | ||||||
% Certified Oxypex tubing has a red outer layer. [1] Flame Spread Index <=25, Smoke Developed Index <=50. Flame Spread Index and Smoke Developed Index for ASTM E84 is based on minimum spacing of 18 inches between tubing runs. Tubing shall be marked [cNSFus® fs ASTM E84 ULC S102.2 FS25/SD50]. |
||||||
Tubing% ¢ [2] |
PEX |
Oxypex |
CAN/ULC S102.2 |
|||
1/2" (without insulation) | ||||||
% Certified Oxypex tubing has a red outer layer. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. [2] Flame Spread Value <=25, Smoke Developed Value <=50. Tubing shall be marked [cNSFus® fs ASTM E84 ULC S102.2 FS25/SD50]. |
||||||
Tubing% ¢ [3] |
PEX |
Oxypex |
CAN/ULC S102.2 |
|||
1/4", 3/8", 5/8", 3/4", 1" (with insulation) | ||||||
% Certified Oxypex tubing has a red outer layer. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. [3] Flame Spread Value <=25, Smoke Developed Value <=50. The Flame Spread Value and Smoke Developed Value is based on when tubing is field insulated with 1/2" JM Microlok HP Hi performance fiberglass insulation as per Bow installation instructions. Tubing shall be marked [cNSF®-fs ULCS102.2 FS25/SD50]. |
||||||
Tubing@ [1] |
PEX |
Superpex |
ASTM E84 |
|||
1/2" (without insulation) | ||||||
@ Certified Bow Superpex tubing has a blue, red, or white outer layer. [1] Flame Spread Index <=25, Smoke Developed Index <=50. Flame Spread Index and Smoke Developed Index for ASTM E84 is based on minimum spacing of 18 inches between tubing runs. Tubing shall be marked [cNSFus® fs ASTM E84 ULC S102.2 FS25/SD50]. |
||||||
Tubing@ ¢ [2] |
PEX |
Superpex |
CAN/ULC S102.2 |
|||
1/2" (without insulation) | ||||||
@ Certified Bow Superpex tubing has a blue, red, or white outer layer. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. [2] Flame Spread Value <=25, Smoke Developed Value <=50. Tubing shall be marked [cNSFus® fs ASTM E84 ULC S102.2 FS25/SD50]. |
||||||
Tubing@ ¢ [3] |
PEX |
Superpex |
CAN/ULC S102.2 |
|||
1/4", 3/8", 3/4", 1" (with insulation) | ||||||
@ Certified Bow Superpex tubing has a blue, red, or white outer layer. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. [3] Flame Spread Value <=25, Smoke Developed Value <=50. The Flame Spread Value and Smoke Developed Value is based on when tubing is field insulated with 1/2" JM Microlok HP Hi performance fiberglass insulation as per Bow installation instructions. Tubing shall be marked [cNSF®-fs ULCS102.2 FS25/SD50]. |
Product Type | Material Type | Trade Name | Product Standard | |||
Tubing! $ * ^ § ++ [G] |
PEX 5106/5306 |
Bowpex |
ASTM F876/F877 |
|||
1/8" - 2" SDR 9 | ||||||
! Product may or may not bear the NSF U.P. code marking. $ Certified Bowpex tubing is natural (PEX 5106), red, white, and blue (PEX 5306). * Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. ++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Domestic Hot (140° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Tubing$ & ¢ ++ [G] |
PEX |
Bowpex |
CSA B137.5 |
|||
1/8" - 2" SDR 9 | ||||||
$ Certified Bowpex tubing is natural (PEX 5106), red, white, and blue (PEX 5306). & Tubing Certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked with the following fitting system designations: ASTM F1807, ASTM F2159. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. ++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Domestic Hot (140° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Tubing! * @ ^ § ++ [G] |
PEX 5306 |
Bow Superpex |
ASTM F876/F877 |
|||
SDR 9 |
||||||
1/4" - 1 1/4" | ||||||
! Product may or may not bear the NSF U.P. code marking. * Accepted by NSF for use in residential and commercial construction, including manufactured housing. @ Certified Bow Superpex tubing has a blue, red, or white outer layer. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. ++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Domestic Hot (140° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Tubing! * @ ^ § ++ [G] |
PEX 5306 |
Bow Superpex |
AWWA C904 |
|||
1/2" - 1 1/4" SDR 9 | ||||||
! Product may or may not bear the NSF U.P. code marking. * Accepted by NSF for use in residential and commercial construction, including manufactured housing. @ Certified Bow Superpex tubing has a blue, red, or white outer layer. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. ++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Domestic Hot (140° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Tubing& @ ¢ ++ [G] |
PEX |
Bow Superpex |
CSA B137.5 |
|||
1/4" - 1 1/4" SDR 9 | ||||||
& Tubing Certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked with the following fitting system designations: ASTM F1807, ASTM F2159. @ Certified Bow Superpex tubing has a blue, red, or white outer layer. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. ++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Domestic Hot (140° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Tubing! $ % * ^ ¢ ++ [G] |
PEX 5106 |
Oxypex |
ASTM F876/F877 |
|||
1/4" - 2" SDR 9 | ||||||
! Product may or may not bear the NSF U.P. code marking. $ Certified Bowpex tubing is natural (PEX 5106), red, white, and blue (PEX 5306). % Certified Oxypex tubing has a red outer layer. * Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. ++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Domestic Hot (140° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Tubing% & ¢ ++ [G] |
PEX |
Oxypex |
CSA B137.5 |
|||
1/4" - 2" SDR 9 | ||||||
% Certified Oxypex tubing has a red outer layer. & Tubing Certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked with the following fitting system designations: ASTM F1807, ASTM F2159. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. ++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Domestic Hot (140° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
Product Type | Material Type | Trade Name | Product Standard | |||
Tubing! % * ^ ¢ § |
PEX 5106 |
Oxypex |
ASTM F876/F877 |
|||
1/4" - 2" SDR 9 | ||||||
! Product may or may not bear the NSF U.P. code marking. % Certified Oxypex tubing has a red outer layer. * Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
||||||
Tubing% ¢ |
PEX |
Oxypex |
CSA B137.5 |
|||
1/4" - 2" SDR 9 | ||||||
% Certified Oxypex tubing has a red outer layer. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. |
$ Bow OXYPERT is red, green or blue in color.
Calefactio Solutions Inc. | |
1120 Boulevard Michele-Bohec | |
Blainville | |
Quebec, QC J7C 5N5 | |
Canada | |
450-951-0818 |
Facility : Barcelona, Spain
Product Type | Material Type | Trade Name | Product Standard | |||
Pipe* ¢ § +++ [G] |
PEX 5106 |
CALEFACTIO |
ASTM F876/F877 |
|||
3/8" - 2" | ||||||
* Natural (Solid Wall) PEX Pipe Certified 3/8" - 2"sizes. Red, blue, white or orange PEX pipe (2 layer pipe - natural with colored adhesive pipe) certified for 3/8" - 1" sizes. Tubing certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked, as applicable, with the following fitting system designation(s): ASTM F1960, ASTM F1807, ASTM F2159, and ASTM F2098. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Pipe* @ ¢ § +++ [G] |
PEX 5106 |
CALEFACTIO |
CSA B137.5 |
|||
3/8" - 2" | ||||||
* Natural (Solid Wall) PEX Pipe Certified 3/8" - 2"sizes. Red, blue, white or orange PEX pipe (2 layer pipe - natural with colored adhesive pipe) certified for 3/8" - 1" sizes. Tubing certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked, as applicable, with the following fitting system designation(s): ASTM F1960, ASTM F1807, ASTM F2159, and ASTM F2098. @ PEX 5106 : Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or documentation shipped with the product are Certified.
Product Type | Material Type | Trade Name | Product Standard | |||
Tubing* @ ¢ § |
PEX 5106 |
CALEFACTIO |
ASTM F876/F877 |
|||
* Monowall pipe (natural); Skinned pipe (red, blue, white and orange); and Barrier pipe (red, blue,white and orange) are certified for the following sizes: 3/8", 1/2", 5/8", 3/4", 1", 1-1/2" & 2". Tubing certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked, as applicable with the following fitting system designation(s): ASTM F1960, ASTM F1807, ASTM F2159, and ASTM F2098. @ This tubing product has been evaluated against the performance requirements of ASTM F876/877 and CSA B137.5. This product is not NSF Certified for use in a potable water distribution system. This product has been evaluated for use in radiant floor heating, (NSF-rfh), applications only. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
||||||
Tubing* @ ¢ § |
PEX 5106 |
CALEFACTIO |
CSA B137.5 |
|||
* Monowall pipe (natural); Skinned pipe (red, blue, white and orange); and Barrier pipe (red, blue,white and orange) are certified for the following sizes: 3/8", 1/2", 5/8", 3/4", 1", 1-1/2" & 2". Tubing certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked, as applicable with the following fitting system designation(s): ASTM F1960, ASTM F1807, ASTM F2159, and ASTM F2098. @ This tubing product has been evaluated against the performance requirements of ASTM F876/877 and CSA B137.5. This product is not NSF Certified for use in a potable water distribution system. This product has been evaluated for use in radiant floor heating, (NSF-rfh), applications only. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
Cash Acme / Reliance Worldwide | |
2400 7th Avenue Southwest | |
Cullman, AL 35055 | |
United States | |
256-775-8184 |
Facility : Middlefield, OH
Product Type | Material Type | Trade Name | Product Standard | |||
Tubing# @ ^ § +++ [G] |
PEX 5106 |
SHARKBITE® |
ASTM F876/F877 |
|||
1/4" - 1" SDR 9 | ||||||
# Authorized for gray and white. @ Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Tubing# & @ ¢ +++ [G] |
PEX 5106 |
SHARKBITE® |
CSA B137.5 |
|||
1/4" - 1" SDR 9 | ||||||
# Authorized for gray and white. & Tubing Certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked, if applicable, with the following fitting system designations: ASTM F1807, ASTM F2159, ASTM F2098, ASTM F2080, ASSE 1061, and ASTM F1960. @ Accepted by NSF for use in residential and commercial construction, including manufactured housing. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
Product Type | Material Type | Trade Name | Product Standard | |||
Tubing# * @ ^ ¢ § |
PEX 5006 |
SHARKBITE® |
ASTM F876/F877 |
|||
3/8" - 1" SDR 9 | ||||||
# Authorized for orange color. * Product is barrier tubing. @ Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
||||||
Tubing# & * @ ¢ |
PEX 5006 |
SHARKBITE® |
CSA B137.5 |
|||
3/8" - 1" SDR 9 | ||||||
# Authorized for orange color. & Tubing Certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked, if applicable, with the following fitting system designations: ASTM F1807, ASTM F2159, ASTM F2098, ASTM F2080, ASSE 1061, and ASTM F1960. * Product is barrier tubing. @ Accepted by NSF for use in residential and commercial construction, including manufactured housing. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. |
CB Supplies Ltd. | |
3325 190th Street | |
Surrey, BC V3S 0L5 | |
Canada | |
800-665-1851 | |
604-535-5088 |
Facility : Surrey, British Columbia, Canada
Product Type | Material Type | Trade Name | Product Standard | |||
Tubing# $ ? @ ^ ~ § +++ [G] |
PEX 5306 |
CANFLEX™ |
ASTM F876/F877 |
|||
1/4" - 2" SDR 9 | ||||||
# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd. Insert Fittings Systems,” most current edition. $ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic radiant heating system made in accordance with the current version of the ASTM F877 standard intended for a maximum 100 psi water service and a maximum working temperature of 180°F. System components consist of tubing and/or fittings. To be installed in accordance with manufacturer’s instructions and the latest edition of the Uniform Plumbing Code™. ? The UV material type 5306 is only applicable to the red, white, light blue and blue pipe. @ Certified for red, blue, white and natural colors. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ~ Accepted by NSF for use in residential and commercial construction, including manufactured housing. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Tubing? @ ^ ~ § +++ [G] |
PEX 5306 |
Canflex |
AWWA C904 |
|||
1/2" - 2" SDR 9 | ||||||
? The UV material type 5306 is only applicable to the red, white, light blue and blue pipe. @ Certified for red, blue, white and natural colors. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ~ Accepted by NSF for use in residential and commercial construction, including manufactured housing. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Tubing# $ @ ^ ~ ¢ § +++ [3] [G] |
PEX 5306 |
CANFLEX™ |
CSA B137.5 |
|||
1/4" - 2" SDR 9 | ||||||
# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd. Insert Fittings Systems,” most current edition. $ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic radiant heating system made in accordance with the current version of the ASTM F877 standard intended for a maximum 100 psi water service and a maximum working temperature of 180°F. System components consist of tubing and/or fittings. To be installed in accordance with manufacturer’s instructions and the latest edition of the Uniform Plumbing Code™. @ Certified for red, blue, white and natural colors. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ~ Accepted by NSF for use in residential and commercial construction, including manufactured housing. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [3] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked, as applicable, with the following fitting system designation(s): ASTM F1807, ASTM F2159, ASSE 1061. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Tubing# $ ? @ ^ ~ § +++ [G] |
PEX 5306 |
CANPEX™ |
ASTM F876/F877 |
|||
1/4" - 2" SDR 9 | ||||||
# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd. Insert Fittings Systems,” most current edition. $ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic radiant heating system made in accordance with the current version of the ASTM F877 standard intended for a maximum 100 psi water service and a maximum working temperature of 180°F. System components consist of tubing and/or fittings. To be installed in accordance with manufacturer’s instructions and the latest edition of the Uniform Plumbing Code™. ? The UV material type 5306 is only applicable to the red, white, light blue and blue pipe. @ Certified for red, blue, white and natural colors. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ~ Accepted by NSF for use in residential and commercial construction, including manufactured housing. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Tubing? @ ^ ~ § +++ [G] |
PEX 5306 |
CanPEX |
AWWA C904 |
|||
1/2" - 2" SDR 9 | ||||||
? The UV material type 5306 is only applicable to the red, white, light blue and blue pipe. @ Certified for red, blue, white and natural colors. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ~ Accepted by NSF for use in residential and commercial construction, including manufactured housing. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Tubing# $ @ ^ ~ ¢ § +++ [3] [G] |
PEX 5306 |
CANPEX™ |
CSA B137.5 |
|||
1/4" - 2" SDR 9 | ||||||
# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd. Insert Fittings Systems,” most current edition. $ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic radiant heating system made in accordance with the current version of the ASTM F877 standard intended for a maximum 100 psi water service and a maximum working temperature of 180°F. System components consist of tubing and/or fittings. To be installed in accordance with manufacturer’s instructions and the latest edition of the Uniform Plumbing Code™. @ Certified for red, blue, white and natural colors. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ~ Accepted by NSF for use in residential and commercial construction, including manufactured housing. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [3] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked, as applicable, with the following fitting system designation(s): ASTM F1807, ASTM F2159, ASSE 1061. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Tubing! # $ % ^ ~ § +++ [G] |
PEX 5206 |
CanPEX Barrier |
ASTM F876/F877 |
|||
1/4" - 2" SDR 9 | ||||||
! Orange, natural, red, and teal green. # Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd. Insert Fittings Systems,” most current edition. $ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic radiant heating system made in accordance with the current version of the ASTM F877 standard intended for a maximum 100 psi water service and a maximum working temperature of 180°F. System components consist of tubing and/or fittings. To be installed in accordance with manufacturer’s instructions and the latest edition of the Uniform Plumbing Code™. % This product is barrier tubing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ~ Accepted by NSF for use in residential and commercial construction, including manufactured housing. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Tubing! # $ % ^ ~ ¢ § +++ [3] [G] |
PEX 5206 |
CanPEX Barrier |
CSA B137.5 |
|||
1/4" – 2" SDR 9 | ||||||
! Orange, natural, red, and teal green. # Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd. Insert Fittings Systems,” most current edition. $ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic radiant heating system made in accordance with the current version of the ASTM F877 standard intended for a maximum 100 psi water service and a maximum working temperature of 180°F. System components consist of tubing and/or fittings. To be installed in accordance with manufacturer’s instructions and the latest edition of the Uniform Plumbing Code™. % This product is barrier tubing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ~ Accepted by NSF for use in residential and commercial construction, including manufactured housing. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [3] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked, as applicable, with the following fitting system designation(s): ASTM F1807, ASTM F2159, ASSE 1061. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Tubing! # $ % ^ ~ § +++ [G] |
PEX 5206 |
CanPEX OXY Barrier |
ASTM F876/F877 |
|||
1/4" - 2" SDR 9 | ||||||
! Orange, natural, red, and teal green. # Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd. Insert Fittings Systems,” most current edition. $ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic radiant heating system made in accordance with the current version of the ASTM F877 standard intended for a maximum 100 psi water service and a maximum working temperature of 180°F. System components consist of tubing and/or fittings. To be installed in accordance with manufacturer’s instructions and the latest edition of the Uniform Plumbing Code™. % This product is barrier tubing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ~ Accepted by NSF for use in residential and commercial construction, including manufactured housing. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Tubing! # $ % ^ ~ ¢ § +++ [3] [G] |
PEX 5206 |
CanPEX OXY Barrier |
CSA B137.5 |
|||
1/4" - 2" SDR 9 | ||||||
! Orange, natural, red, and teal green. # Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd. Insert Fittings Systems,” most current edition. $ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic radiant heating system made in accordance with the current version of the ASTM F877 standard intended for a maximum 100 psi water service and a maximum working temperature of 180°F. System components consist of tubing and/or fittings. To be installed in accordance with manufacturer’s instructions and the latest edition of the Uniform Plumbing Code™. % This product is barrier tubing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ~ Accepted by NSF for use in residential and commercial construction, including manufactured housing. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [3] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked, as applicable, with the following fitting system designation(s): ASTM F1807, ASTM F2159, ASSE 1061. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Tubing# $ ^ ~ § µ +++ [G] |
PEX 5306 |
CanPEX Ultra |
ASTM F876/F877 |
|||
3/8" – 2" SDR 9 | ||||||
# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd. Insert Fittings Systems,” most current edition. $ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic radiant heating system made in accordance with the current version of the ASTM F877 standard intended for a maximum 100 psi water service and a maximum working temperature of 180°F. System components consist of tubing and/or fittings. To be installed in accordance with manufacturer’s instructions and the latest edition of the Uniform Plumbing Code™. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ~ Accepted by NSF for use in residential and commercial construction, including manufactured housing. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. µ Certified pipe has a black inner layer with a red, white, or blue outer layer. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Tubing# $ ^ ~ ¢ § µ +++ [3] [G] |
PEX 5306 |
CanPEX Ultra |
CSA B137.5 |
|||
3/8" – 2" SDR 9 | ||||||
# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd. Insert Fittings Systems,” most current edition. $ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic radiant heating system made in accordance with the current version of the ASTM F877 standard intended for a maximum 100 psi water service and a maximum working temperature of 180°F. System components consist of tubing and/or fittings. To be installed in accordance with manufacturer’s instructions and the latest edition of the Uniform Plumbing Code™. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ~ Accepted by NSF for use in residential and commercial construction, including manufactured housing. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. µ Certified pipe has a black inner layer with a red, white, or blue outer layer. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [3] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked, as applicable, with the following fitting system designation(s): ASTM F1807, ASTM F2159, ASSE 1061. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Tubing# $ ? @ ^ ~ § +++ [G] |
PEX 5306 |
CANPEX™ UV |
ASTM F876/F877 |
|||
1/4" - 2" SDR 9 | ||||||
# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd. Insert Fittings Systems,” most current edition. $ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic radiant heating system made in accordance with the current version of the ASTM F877 standard intended for a maximum 100 psi water service and a maximum working temperature of 180°F. System components consist of tubing and/or fittings. To be installed in accordance with manufacturer’s instructions and the latest edition of the Uniform Plumbing Code™. ? The UV material type 5306 is only applicable to the red, white, light blue and blue pipe. @ Certified for red, blue, white and natural colors. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ~ Accepted by NSF for use in residential and commercial construction, including manufactured housing. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Tubing? @ ^ ~ § +++ [G] |
PEX 5306 |
CanPEX UV |
AWWA C904 |
|||
1/2" - 2" SDR 9 | ||||||
? The UV material type 5306 is only applicable to the red, white, light blue and blue pipe. @ Certified for red, blue, white and natural colors. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ~ Accepted by NSF for use in residential and commercial construction, including manufactured housing. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Tubing# $ ? @ ^ ~ ¢ § +++ [3] [G] |
PEX 5306 |
CANPEX™ UV |
CSA B137.5 |
|||
1/4" - 2" SDR 9 | ||||||
# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd. Insert Fittings Systems,” most current edition. $ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic radiant heating system made in accordance with the current version of the ASTM F877 standard intended for a maximum 100 psi water service and a maximum working temperature of 180°F. System components consist of tubing and/or fittings. To be installed in accordance with manufacturer’s instructions and the latest edition of the Uniform Plumbing Code™. ? The UV material type 5306 is only applicable to the red, white, light blue and blue pipe. @ Certified for red, blue, white and natural colors. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ~ Accepted by NSF for use in residential and commercial construction, including manufactured housing. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [3] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked, as applicable, with the following fitting system designation(s): ASTM F1807, ASTM F2159, ASSE 1061. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Tubing# $ ? @ ^ ~ § +++ [G] |
PEX 5306 |
CANPEX™ UV + |
ASTM F876/F877 |
|||
1/4" - 2" SDR 9 | ||||||
# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd. Insert Fittings Systems,” most current edition. $ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic radiant heating system made in accordance with the current version of the ASTM F877 standard intended for a maximum 100 psi water service and a maximum working temperature of 180°F. System components consist of tubing and/or fittings. To be installed in accordance with manufacturer’s instructions and the latest edition of the Uniform Plumbing Code™. ? The UV material type 5306 is only applicable to the red, white, light blue and blue pipe. @ Certified for red, blue, white and natural colors. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ~ Accepted by NSF for use in residential and commercial construction, including manufactured housing. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Tubing? @ ^ ~ § +++ [G] |
PEX 5306 |
CanPEX UV+ |
AWWA C904 |
|||
1/2" - 2" SDR 9 | ||||||
? The UV material type 5306 is only applicable to the red, white, light blue and blue pipe. @ Certified for red, blue, white and natural colors. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ~ Accepted by NSF for use in residential and commercial construction, including manufactured housing. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Tubing# $ ? @ ^ ~ ¢ § +++ [3] [G] |
PEX 5306 |
CANPEX™ UV + |
CSA B137.5 |
|||
1/4" - 2" SDR 9 | ||||||
# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd. Insert Fittings Systems,” most current edition. $ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic radiant heating system made in accordance with the current version of the ASTM F877 standard intended for a maximum 100 psi water service and a maximum working temperature of 180°F. System components consist of tubing and/or fittings. To be installed in accordance with manufacturer’s instructions and the latest edition of the Uniform Plumbing Code™. ? The UV material type 5306 is only applicable to the red, white, light blue and blue pipe. @ Certified for red, blue, white and natural colors. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ~ Accepted by NSF for use in residential and commercial construction, including manufactured housing. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [3] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked, as applicable, with the following fitting system designation(s): ASTM F1807, ASTM F2159, ASSE 1061. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Tubing# $ ? @ ^ ~ § +++ [G] |
PEX 5306 |
CANPEX™ UV + MD |
ASTM F876/F877 |
|||
1/4" - 2" SDR 9 | ||||||
# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd. Insert Fittings Systems,” most current edition. $ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic radiant heating system made in accordance with the current version of the ASTM F877 standard intended for a maximum 100 psi water service and a maximum working temperature of 180°F. System components consist of tubing and/or fittings. To be installed in accordance with manufacturer’s instructions and the latest edition of the Uniform Plumbing Code™. ? The UV material type 5306 is only applicable to the red, white, light blue and blue pipe. @ Certified for red, blue, white and natural colors. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ~ Accepted by NSF for use in residential and commercial construction, including manufactured housing. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Tubing? @ ^ ~ § +++ [G] |
PEX 5306 |
CanPEX UV+MD |
AWWA C904 |
|||
1/2" - 2" SDR 9 | ||||||
? The UV material type 5306 is only applicable to the red, white, light blue and blue pipe. @ Certified for red, blue, white and natural colors. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ~ Accepted by NSF for use in residential and commercial construction, including manufactured housing. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Tubing# $ ? @ ^ ~ ¢ § +++ [3] [G] |
PEX 5306 |
CANPEX™ UV + MD |
CSA B137.5 |
|||
1/4" - 2" SDR 9 | ||||||
# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd. Insert Fittings Systems,” most current edition. $ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic radiant heating system made in accordance with the current version of the ASTM F877 standard intended for a maximum 100 psi water service and a maximum working temperature of 180°F. System components consist of tubing and/or fittings. To be installed in accordance with manufacturer’s instructions and the latest edition of the Uniform Plumbing Code™. ? The UV material type 5306 is only applicable to the red, white, light blue and blue pipe. @ Certified for red, blue, white and natural colors. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ~ Accepted by NSF for use in residential and commercial construction, including manufactured housing. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [3] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked, as applicable, with the following fitting system designation(s): ASTM F1807, ASTM F2159, ASSE 1061. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Tubing# $ ? @ ^ ~ § +++ [G] |
PEX 5306 |
CANPEX™ UV Plus |
ASTM F876/F877 |
|||
1/4" - 2" SDR 9 | ||||||
# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd. Insert Fittings Systems,” most current edition. $ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic radiant heating system made in accordance with the current version of the ASTM F877 standard intended for a maximum 100 psi water service and a maximum working temperature of 180°F. System components consist of tubing and/or fittings. To be installed in accordance with manufacturer’s instructions and the latest edition of the Uniform Plumbing Code™. ? The UV material type 5306 is only applicable to the red, white, light blue and blue pipe. @ Certified for red, blue, white and natural colors. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ~ Accepted by NSF for use in residential and commercial construction, including manufactured housing. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Tubing? @ ^ ~ § +++ [G] |
PEX 5306 |
CanPEX UV Plus |
AWWA C904 |
|||
1/2" - 2" SDR 9 | ||||||
? The UV material type 5306 is only applicable to the red, white, light blue and blue pipe. @ Certified for red, blue, white and natural colors. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ~ Accepted by NSF for use in residential and commercial construction, including manufactured housing. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Tubing# $ ? @ ^ ~ ¢ § +++ [3] [G] |
PEX 5306 |
CANPEX™ UV Plus |
CSA B137.5 |
|||
1/4" - 2" SDR 9 | ||||||
# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd. Insert Fittings Systems,” most current edition. $ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic radiant heating system made in accordance with the current version of the ASTM F877 standard intended for a maximum 100 psi water service and a maximum working temperature of 180°F. System components consist of tubing and/or fittings. To be installed in accordance with manufacturer’s instructions and the latest edition of the Uniform Plumbing Code™. ? The UV material type 5306 is only applicable to the red, white, light blue and blue pipe. @ Certified for red, blue, white and natural colors. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ~ Accepted by NSF for use in residential and commercial construction, including manufactured housing. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [3] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked, as applicable, with the following fitting system designation(s): ASTM F1807, ASTM F2159, ASSE 1061. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Tubing# $ ? @ ^ ~ § +++ [G] |
PEX 5306 |
CANPEX™ UV Plus MD |
ASTM F876/F877 |
|||
1/4" - 2" SDR 9 | ||||||
# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd. Insert Fittings Systems,” most current edition. $ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic radiant heating system made in accordance with the current version of the ASTM F877 standard intended for a maximum 100 psi water service and a maximum working temperature of 180°F. System components consist of tubing and/or fittings. To be installed in accordance with manufacturer’s instructions and the latest edition of the Uniform Plumbing Code™. ? The UV material type 5306 is only applicable to the red, white, light blue and blue pipe. @ Certified for red, blue, white and natural colors. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ~ Accepted by NSF for use in residential and commercial construction, including manufactured housing. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Tubing? @ ^ ~ § +++ [G] |
PEX 5306 |
CanPEX UV Plus MD |
AWWA C904 |
|||
1/2" - 2" SDR 9 | ||||||
? The UV material type 5306 is only applicable to the red, white, light blue and blue pipe. @ Certified for red, blue, white and natural colors. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ~ Accepted by NSF for use in residential and commercial construction, including manufactured housing. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Tubing# $ ? @ ^ ~ ¢ § +++ [3] [G] |
PEX 5306 |
CANPEX™ UV Plus MD |
CSA B137.5 |
|||
1/4" - 2" SDR 9 | ||||||
# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd. Insert Fittings Systems,” most current edition. $ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic radiant heating system made in accordance with the current version of the ASTM F877 standard intended for a maximum 100 psi water service and a maximum working temperature of 180°F. System components consist of tubing and/or fittings. To be installed in accordance with manufacturer’s instructions and the latest edition of the Uniform Plumbing Code™. ? The UV material type 5306 is only applicable to the red, white, light blue and blue pipe. @ Certified for red, blue, white and natural colors. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ~ Accepted by NSF for use in residential and commercial construction, including manufactured housing. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [3] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked, as applicable, with the following fitting system designation(s): ASTM F1807, ASTM F2159, ASSE 1061. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Tubing# $ ? @ ^ ~ § +++ [G] |
PEX 5306 |
CANPLUMB™ |
ASTM F876/F877 |
|||
1/4" - 2" SDR 9 | ||||||
# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd. Insert Fittings Systems,” most current edition. $ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic radiant heating system made in accordance with the current version of the ASTM F877 standard intended for a maximum 100 psi water service and a maximum working temperature of 180°F. System components consist of tubing and/or fittings. To be installed in accordance with manufacturer’s instructions and the latest edition of the Uniform Plumbing Code™. ? The UV material type 5306 is only applicable to the red, white, light blue and blue pipe. @ Certified for red, blue, white and natural colors. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ~ Accepted by NSF for use in residential and commercial construction, including manufactured housing. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Tubing? @ ^ ~ § +++ [G] |
PEX 5306 |
CanPLUMB |
AWWA C904 |
|||
1/2" - 2" SDR 9 | ||||||
? The UV material type 5306 is only applicable to the red, white, light blue and blue pipe. @ Certified for red, blue, white and natural colors. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ~ Accepted by NSF for use in residential and commercial construction, including manufactured housing. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Tubing# $ @ ^ ~ ¢ § +++ [3] [G] |
PEX 5306 |
CANPLUMB™ |
CSA B137.5 |
|||
1/4" - 2" SDR 9 | ||||||
# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd. Insert Fittings Systems,” most current edition. $ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic radiant heating system made in accordance with the current version of the ASTM F877 standard intended for a maximum 100 psi water service and a maximum working temperature of 180°F. System components consist of tubing and/or fittings. To be installed in accordance with manufacturer’s instructions and the latest edition of the Uniform Plumbing Code™. @ Certified for red, blue, white and natural colors. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ~ Accepted by NSF for use in residential and commercial construction, including manufactured housing. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [3] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked, as applicable, with the following fitting system designation(s): ASTM F1807, ASTM F2159, ASSE 1061. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Tubing! # $ % ^ ~ § +++ [G] |
PEX 5206 |
CanRay |
ASTM F876/F877 |
|||
1/4" - 2" SDR 9 | ||||||
! Orange, natural, red, and teal green. # Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd. Insert Fittings Systems,” most current edition. $ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic radiant heating system made in accordance with the current version of the ASTM F877 standard intended for a maximum 100 psi water service and a maximum working temperature of 180°F. System components consist of tubing and/or fittings. To be installed in accordance with manufacturer’s instructions and the latest edition of the Uniform Plumbing Code™. % This product is barrier tubing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ~ Accepted by NSF for use in residential and commercial construction, including manufactured housing. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Tubing! # $ % ^ ~ ¢ § +++ [3] [G] |
PEX 5206 |
CanRay |
CSA B137.5 |
|||
1/4" – 2" SDR 9 | ||||||
! Orange, natural, red, and teal green. # Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd. Insert Fittings Systems,” most current edition. $ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic radiant heating system made in accordance with the current version of the ASTM F877 standard intended for a maximum 100 psi water service and a maximum working temperature of 180°F. System components consist of tubing and/or fittings. To be installed in accordance with manufacturer’s instructions and the latest edition of the Uniform Plumbing Code™. % This product is barrier tubing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ~ Accepted by NSF for use in residential and commercial construction, including manufactured housing. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [3] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked, as applicable, with the following fitting system designation(s): ASTM F1807, ASTM F2159, ASSE 1061. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Tubing! # $ % ^ ~ § Þ |
PEX 5206 |
Embassy / LiquiPEX w/O2 Barrier |
ASTM F876/F877 |
|||
1/4" – 2" SDR 9 | ||||||
! Orange, natural, red, and teal green. # Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd. Insert Fittings Systems,” most current edition. $ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic radiant heating system made in accordance with the current version of the ASTM F877 standard intended for a maximum 100 psi water service and a maximum working temperature of 180°F. System components consist of tubing and/or fittings. To be installed in accordance with manufacturer’s instructions and the latest edition of the Uniform Plumbing Code™. % This product is barrier tubing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ~ Accepted by NSF for use in residential and commercial construction, including manufactured housing. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. Þ Product is Certified to the International Plumbing Code. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the International Plumbing Code. |
||||||
Tubing! # $ % ^ ~ ¢ § Þ [3] |
PEX 5206 |
Embassy / LiquiPEX w/O2 Barrier |
CSA B137.5 |
|||
1/4" – 2" SDR 9 | ||||||
! Orange, natural, red, and teal green. # Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd. Insert Fittings Systems,” most current edition. $ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic radiant heating system made in accordance with the current version of the ASTM F877 standard intended for a maximum 100 psi water service and a maximum working temperature of 180°F. System components consist of tubing and/or fittings. To be installed in accordance with manufacturer’s instructions and the latest edition of the Uniform Plumbing Code™. % This product is barrier tubing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ~ Accepted by NSF for use in residential and commercial construction, including manufactured housing. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. Þ Product is Certified to the International Plumbing Code. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the International Plumbing Code. [3] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked, as applicable, with the following fitting system designation(s): ASTM F1807, ASTM F2159, ASSE 1061. |
||||||
Tubing# $ ? @ ^ ~ § +++ [G] |
PEX 5306 |
LYNX-PEX |
ASTM F876/F877 |
|||
1/4" - 2" SDR 9 | ||||||
# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd. Insert Fittings Systems,” most current edition. $ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic radiant heating system made in accordance with the current version of the ASTM F877 standard intended for a maximum 100 psi water service and a maximum working temperature of 180°F. System components consist of tubing and/or fittings. To be installed in accordance with manufacturer’s instructions and the latest edition of the Uniform Plumbing Code™. ? The UV material type 5306 is only applicable to the red, white, light blue and blue pipe. @ Certified for red, blue, white and natural colors. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ~ Accepted by NSF for use in residential and commercial construction, including manufactured housing. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Tubing? @ ^ ~ § +++ [G] |
PEX 5306 |
LYNX-PEX |
AWWA C904 |
|||
1/2" - 2" SDR 9 | ||||||
? The UV material type 5306 is only applicable to the red, white, light blue and blue pipe. @ Certified for red, blue, white and natural colors. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ~ Accepted by NSF for use in residential and commercial construction, including manufactured housing. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Tubing# $ ? @ ^ ~ ¢ § +++ [3] [G] |
PEX 5306 |
LYNX-PEX |
CSA B137.5 |
|||
1/4" - 2" SDR 9 | ||||||
# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd. Insert Fittings Systems,” most current edition. $ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic radiant heating system made in accordance with the current version of the ASTM F877 standard intended for a maximum 100 psi water service and a maximum working temperature of 180°F. System components consist of tubing and/or fittings. To be installed in accordance with manufacturer’s instructions and the latest edition of the Uniform Plumbing Code™. ? The UV material type 5306 is only applicable to the red, white, light blue and blue pipe. @ Certified for red, blue, white and natural colors. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ~ Accepted by NSF for use in residential and commercial construction, including manufactured housing. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [3] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked, as applicable, with the following fitting system designation(s): ASTM F1807, ASTM F2159, ASSE 1061. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Tubing# $ ? @ ^ ~ § +++ [G] |
PEX 5306 |
Radiant Floor Company/ DURA-POLY XL |
ASTM F876/F877 |
|||
1/4" - 2" SDR 9 | ||||||
# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd. Insert Fittings Systems,” most current edition. $ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic radiant heating system made in accordance with the current version of the ASTM F877 standard intended for a maximum 100 psi water service and a maximum working temperature of 180°F. System components consist of tubing and/or fittings. To be installed in accordance with manufacturer’s instructions and the latest edition of the Uniform Plumbing Code™. ? The UV material type 5306 is only applicable to the red, white, light blue and blue pipe. @ Certified for red, blue, white and natural colors. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ~ Accepted by NSF for use in residential and commercial construction, including manufactured housing. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Tubing# $ ? @ ^ ~ ¢ § +++ [3] [G] |
PEX 5306 |
Radiant Floor Company/ DURA-POLY XL |
CSA B137.5 |
|||
1/4" - 2" SDR 9 | ||||||
# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd. Insert Fittings Systems,” most current edition. $ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic radiant heating system made in accordance with the current version of the ASTM F877 standard intended for a maximum 100 psi water service and a maximum working temperature of 180°F. System components consist of tubing and/or fittings. To be installed in accordance with manufacturer’s instructions and the latest edition of the Uniform Plumbing Code™. ? The UV material type 5306 is only applicable to the red, white, light blue and blue pipe. @ Certified for red, blue, white and natural colors. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ~ Accepted by NSF for use in residential and commercial construction, including manufactured housing. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [3] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked, as applicable, with the following fitting system designation(s): ASTM F1807, ASTM F2159, ASSE 1061. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Tubing! # $ ^ ~ § +++ [G] |
PEX 5206 |
Radiant Floor Company / DURA-POLY XL |
ASTM F876/F877 |
|||
1/4" - 2" SDR 9 | ||||||
! Orange, natural, red, and teal green. # Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd. Insert Fittings Systems,” most current edition. $ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic radiant heating system made in accordance with the current version of the ASTM F877 standard intended for a maximum 100 psi water service and a maximum working temperature of 180°F. System components consist of tubing and/or fittings. To be installed in accordance with manufacturer’s instructions and the latest edition of the Uniform Plumbing Code™. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ~ Accepted by NSF for use in residential and commercial construction, including manufactured housing. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Tubing! # $ % ^ ~ ¢ § +++ [3] [G] |
PEX 5206 |
Radiant Floor Company/ DURA-POLY XL |
CSA B137.5 |
|||
1/4" - 2" SDR 9 | ||||||
! Orange, natural, red, and teal green. # Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd. Insert Fittings Systems,” most current edition. $ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic radiant heating system made in accordance with the current version of the ASTM F877 standard intended for a maximum 100 psi water service and a maximum working temperature of 180°F. System components consist of tubing and/or fittings. To be installed in accordance with manufacturer’s instructions and the latest edition of the Uniform Plumbing Code™. % This product is barrier tubing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ~ Accepted by NSF for use in residential and commercial construction, including manufactured housing. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [3] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked, as applicable, with the following fitting system designation(s): ASTM F1807, ASTM F2159, ASSE 1061. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Tubing! # $ @ ^ ~ § +++ [G] |
PEX 5206 |
Radiantec Company Inc. / Radiantec |
ASTM F876/F877 |
|||
1/2" - 3/4" SDR 9 | ||||||
! Orange, natural, red, and teal green. # Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd. Insert Fittings Systems,” most current edition. $ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic radiant heating system made in accordance with the current version of the ASTM F877 standard intended for a maximum 100 psi water service and a maximum working temperature of 180°F. System components consist of tubing and/or fittings. To be installed in accordance with manufacturer’s instructions and the latest edition of the Uniform Plumbing Code™. @ Certified for red, blue, white and natural colors. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ~ Accepted by NSF for use in residential and commercial construction, including manufactured housing. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Tubing! # $ % ^ ~ ¢ § +++ [3] [G] |
PEX 5206 |
Radiantec Company Inc. / Radiantec |
CSA B137.5 |
|||
1/2" - 3/4" SDR 9 | ||||||
! Orange, natural, red, and teal green. # Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd. Insert Fittings Systems,” most current edition. $ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic radiant heating system made in accordance with the current version of the ASTM F877 standard intended for a maximum 100 psi water service and a maximum working temperature of 180°F. System components consist of tubing and/or fittings. To be installed in accordance with manufacturer’s instructions and the latest edition of the Uniform Plumbing Code™. % This product is barrier tubing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ~ Accepted by NSF for use in residential and commercial construction, including manufactured housing. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [3] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked, as applicable, with the following fitting system designation(s): ASTM F1807, ASTM F2159, ASSE 1061. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Tubing! # $ % ^ ~ § +++ [G] |
PEX 5206 |
RadiantMax |
ASTM F876/F877 |
|||
1/4" - 2" SDR 9 | ||||||
! Orange, natural, red, and teal green. # Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd. Insert Fittings Systems,” most current edition. $ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic radiant heating system made in accordance with the current version of the ASTM F877 standard intended for a maximum 100 psi water service and a maximum working temperature of 180°F. System components consist of tubing and/or fittings. To be installed in accordance with manufacturer’s instructions and the latest edition of the Uniform Plumbing Code™. % This product is barrier tubing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ~ Accepted by NSF for use in residential and commercial construction, including manufactured housing. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Tubing! # $ % ^ ~ ¢ § +++ [3] [G] |
PEX 5206 |
RadiantMax |
CSA B137.5 |
|||
1/4" – 2" SDR 9 | ||||||
! Orange, natural, red, and teal green. # Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd. Insert Fittings Systems,” most current edition. $ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic radiant heating system made in accordance with the current version of the ASTM F877 standard intended for a maximum 100 psi water service and a maximum working temperature of 180°F. System components consist of tubing and/or fittings. To be installed in accordance with manufacturer’s instructions and the latest edition of the Uniform Plumbing Code™. % This product is barrier tubing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ~ Accepted by NSF for use in residential and commercial construction, including manufactured housing. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [3] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked, as applicable, with the following fitting system designation(s): ASTM F1807, ASTM F2159, ASSE 1061. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Tubing# $ ? @ ^ ~ § +++ [G] |
PEX 5306 |
Vanex |
ASTM F876/F877 |
|||
1/4" - 2" SDR 9 | ||||||
# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd. Insert Fittings Systems,” most current edition. $ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic radiant heating system made in accordance with the current version of the ASTM F877 standard intended for a maximum 100 psi water service and a maximum working temperature of 180°F. System components consist of tubing and/or fittings. To be installed in accordance with manufacturer’s instructions and the latest edition of the Uniform Plumbing Code™. ? The UV material type 5306 is only applicable to the red, white, light blue and blue pipe. @ Certified for red, blue, white and natural colors. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ~ Accepted by NSF for use in residential and commercial construction, including manufactured housing. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Tubing? @ ^ ~ § +++ [G] |
PEX 5306 |
Vanex |
AWWA C904 |
|||
1/2" - 2" SDR 9 | ||||||
? The UV material type 5306 is only applicable to the red, white, light blue and blue pipe. @ Certified for red, blue, white and natural colors. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ~ Accepted by NSF for use in residential and commercial construction, including manufactured housing. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Tubing# $ @ ^ ~ ¢ § +++ [3] [G] |
PEX 5306 |
Vanex |
CSA B137.5 |
|||
1/4" – 2" SDR 9 | ||||||
# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd. Insert Fittings Systems,” most current edition. $ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic radiant heating system made in accordance with the current version of the ASTM F877 standard intended for a maximum 100 psi water service and a maximum working temperature of 180°F. System components consist of tubing and/or fittings. To be installed in accordance with manufacturer’s instructions and the latest edition of the Uniform Plumbing Code™. @ Certified for red, blue, white and natural colors. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ~ Accepted by NSF for use in residential and commercial construction, including manufactured housing. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [3] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked, as applicable, with the following fitting system designation(s): ASTM F1807, ASTM F2159, ASSE 1061. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Tubing! # $ % ^ ~ ¢ § +++ [3] [G] |
PEX 5206 |
Vanex Barrier |
CSA B137.5 |
|||
1/4" – 2" SDR 9 | ||||||
! Orange, natural, red, and teal green. # Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd. Insert Fittings Systems,” most current edition. $ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic radiant heating system made in accordance with the current version of the ASTM F877 standard intended for a maximum 100 psi water service and a maximum working temperature of 180°F. System components consist of tubing and/or fittings. To be installed in accordance with manufacturer’s instructions and the latest edition of the Uniform Plumbing Code™. % This product is barrier tubing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ~ Accepted by NSF for use in residential and commercial construction, including manufactured housing. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [3] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked, as applicable, with the following fitting system designation(s): ASTM F1807, ASTM F2159, ASSE 1061. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Tubing! # $ % ^ ~ § +++ [G] |
PEX 5206 |
Vanex Barrier |
ASTM F876/F877 |
|||
1/4" - 2" SDR 9 | ||||||
! Orange, natural, red, and teal green. # Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd. Insert Fittings Systems,” most current edition. $ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic radiant heating system made in accordance with the current version of the ASTM F877 standard intended for a maximum 100 psi water service and a maximum working temperature of 180°F. System components consist of tubing and/or fittings. To be installed in accordance with manufacturer’s instructions and the latest edition of the Uniform Plumbing Code™. % This product is barrier tubing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ~ Accepted by NSF for use in residential and commercial construction, including manufactured housing. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Tubing# $ ^ ~ § µ +++ [G] |
PEX 5306 |
Vanex Ultra |
ASTM F876/F877 |
|||
3/8" – 2" SDR 9 | ||||||
# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd. Insert Fittings Systems,” most current edition. $ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic radiant heating system made in accordance with the current version of the ASTM F877 standard intended for a maximum 100 psi water service and a maximum working temperature of 180°F. System components consist of tubing and/or fittings. To be installed in accordance with manufacturer’s instructions and the latest edition of the Uniform Plumbing Code™. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ~ Accepted by NSF for use in residential and commercial construction, including manufactured housing. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. µ Certified pipe has a black inner layer with a red, white, or blue outer layer. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Tubing# $ ^ ~ ¢ § µ +++ [3] [G] |
PEX 5306 |
Vanex Ultra |
CSA B137.5 |
|||
3/8" – 2" SDR 9 | ||||||
# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd. Insert Fittings Systems,” most current edition. $ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic radiant heating system made in accordance with the current version of the ASTM F877 standard intended for a maximum 100 psi water service and a maximum working temperature of 180°F. System components consist of tubing and/or fittings. To be installed in accordance with manufacturer’s instructions and the latest edition of the Uniform Plumbing Code™. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ~ Accepted by NSF for use in residential and commercial construction, including manufactured housing. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. µ Certified pipe has a black inner layer with a red, white, or blue outer layer. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [3] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked, as applicable, with the following fitting system designation(s): ASTM F1807, ASTM F2159, ASSE 1061. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
Product Type | Material Type | Trade Name | Product Standard | |||
Pipe# @ § |
PEX 5306 |
Canflex |
ASTM F876/F877 |
|||
1/4" - 2" SDR 9 | ||||||
# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd. Insert Fittings Systems,” most current edition. @ Certified for purple color. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
||||||
Pipe@ § |
PEX 5306 |
Canflex |
AWWA C904 |
|||
1/2" - 2" SDR 9 | ||||||
@ Certified for purple color. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
||||||
Pipe# @ ¢ § [1] |
PEX 5306 |
Canflex |
CSA B137.5 |
|||
1/4" - 2" SDR 9 | ||||||
# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd. Insert Fittings Systems,” most current edition. @ Certified for purple color. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [1] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked, as applicable, with the following fitting system designation(s): ASTM F1807, ASTM F2159, ASSE 1061. |
||||||
Pipe# @ § |
PEX 5306 |
CanPEX |
ASTM F876/F877 |
|||
1/4" - 2" SDR 9 | ||||||
# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd. Insert Fittings Systems,” most current edition. @ Certified for purple color. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
||||||
Pipe@ § |
PEX 5306 |
CanPEX |
AWWA C904 |
|||
1/2" - 2" SDR 9 | ||||||
@ Certified for purple color. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
||||||
Pipe# @ ¢ § [1] |
PEX 5306 |
CanPEX |
CSA B137.5 |
|||
1/4" - 2" SDR 9 | ||||||
# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd. Insert Fittings Systems,” most current edition. @ Certified for purple color. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [1] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked, as applicable, with the following fitting system designation(s): ASTM F1807, ASTM F2159, ASSE 1061. |
||||||
Pipe# @ § |
PEX 5306 |
CanPex UV |
ASTM F876/F877 |
|||
1/4" - 2" SDR 9 | ||||||
# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd. Insert Fittings Systems,” most current edition. @ Certified for purple color. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
||||||
Pipe@ § |
PEX 5306 |
CanPex UV |
AWWA C904 |
|||
1/2" - 2" SDR 9 | ||||||
@ Certified for purple color. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
||||||
Pipe# @ ¢ § [1] |
PEX 5306 |
CanPex UV |
CSA B137.5 |
|||
1/4" - 2" SDR 9 | ||||||
# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd. Insert Fittings Systems,” most current edition. @ Certified for purple color. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [1] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked, as applicable, with the following fitting system designation(s): ASTM F1807, ASTM F2159, ASSE 1061. |
||||||
Pipe# @ § |
PEX 5306 |
CanPex UV Plus |
ASTM F876/F877 |
|||
1/4" - 2" SDR 9 | ||||||
# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd. Insert Fittings Systems,” most current edition. @ Certified for purple color. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
||||||
Pipe@ § |
PEX 5306 |
CanPex UV Plus |
AWWA C904 |
|||
1/2" - 2" SDR 9 | ||||||
@ Certified for purple color. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
||||||
Pipe# @ ¢ § [1] |
PEX 5306 |
CanPex UV Plus |
CSA B137.5 |
|||
1/4" - 2" SDR 9 | ||||||
# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd. Insert Fittings Systems,” most current edition. @ Certified for purple color. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [1] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked, as applicable, with the following fitting system designation(s): ASTM F1807, ASTM F2159, ASSE 1061. |
||||||
Pipe# @ § |
PEX 5306 |
CanPex UV Plus MD |
ASTM F876/F877 |
|||
1/4" - 2" SDR 9 | ||||||
# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd. Insert Fittings Systems,” most current edition. @ Certified for purple color. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
||||||
Pipe@ § |
PEX 5306 |
CanPex UV Plus MD |
AWWA C904 |
|||
1/2" - 2" SDR 9 | ||||||
@ Certified for purple color. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
||||||
Pipe# @ ¢ § [1] |
PEX 5306 |
CanPex UV Plus MD |
CSA B137.5 |
|||
1/4" - 2" SDR 9 | ||||||
# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd. Insert Fittings Systems,” most current edition. @ Certified for purple color. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [1] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked, as applicable, with the following fitting system designation(s): ASTM F1807, ASTM F2159, ASSE 1061. |
||||||
Pipe# @ § |
PEX 5306 |
CanPEX UV+ |
ASTM F876/F877 |
|||
1/4" - 2" SDR 9 | ||||||
# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd. Insert Fittings Systems,” most current edition. @ Certified for purple color. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
||||||
Pipe@ § |
PEX 5306 |
CanPEX UV+ |
AWWA C904 |
|||
1/2" - 2" SDR 9 | ||||||
@ Certified for purple color. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
||||||
Pipe# @ ¢ § [1] |
PEX 5306 |
CanPEX UV+ |
CSA B137.5 |
|||
1/4" - 2" SDR 9 | ||||||
# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd. Insert Fittings Systems,” most current edition. @ Certified for purple color. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [1] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked, as applicable, with the following fitting system designation(s): ASTM F1807, ASTM F2159, ASSE 1061. |
||||||
Pipe# @ § |
PEX 5306 |
CanPEX UV+MD |
ASTM F876/F877 |
|||
1/4" - 2" SDR 9 | ||||||
# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd. Insert Fittings Systems,” most current edition. @ Certified for purple color. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
||||||
Pipe@ § |
PEX 5306 |
CanPEX UV+MD |
AWWA C904 |
|||
1/2" - 2" SDR 9 | ||||||
@ Certified for purple color. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
||||||
Pipe# @ ¢ § [1] |
PEX 5306 |
CanPEX UV+MD |
CSA B137.5 |
|||
1/4" - 2" SDR 9 | ||||||
# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd. Insert Fittings Systems,” most current edition. @ Certified for purple color. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [1] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked, as applicable, with the following fitting system designation(s): ASTM F1807, ASTM F2159, ASSE 1061. |
||||||
Pipe# @ § |
PEX 5306 |
CanPLUMB |
ASTM F876/F877 |
|||
1/4" - 2" SDR 9 | ||||||
# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd. Insert Fittings Systems,” most current edition. @ Certified for purple color. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
||||||
Pipe@ § |
PEX 5306 |
CanPLUMB |
AWWA C904 |
|||
1/2" - 2" SDR 9 | ||||||
@ Certified for purple color. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
||||||
Pipe# @ ¢ § [1] |
PEX 5306 |
CanPLUMB |
CSA B137.5 |
|||
1/4" - 2" SDR 9 | ||||||
# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd. Insert Fittings Systems,” most current edition. @ Certified for purple color. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [1] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked, as applicable, with the following fitting system designation(s): ASTM F1807, ASTM F2159, ASSE 1061. |
||||||
Pipe# @ § |
PEX 5306 |
LYNX-PEX |
ASTM F876/F877 |
|||
1/4" - 2" SDR 9 | ||||||
# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd. Insert Fittings Systems,” most current edition. @ Certified for purple color. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
||||||
Pipe@ § |
PEX 5306 |
LYNX-PEX |
AWWA C904 |
|||
1/2" - 2" SDR 9 | ||||||
@ Certified for purple color. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
||||||
Pipe# @ ¢ § [1] |
PEX 5306 |
LYNX-PEX |
CSA B137.5 |
|||
1/4" - 2" SDR 9 | ||||||
# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd. Insert Fittings Systems,” most current edition. @ Certified for purple color. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [1] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked, as applicable, with the following fitting system designation(s): ASTM F1807, ASTM F2159, ASSE 1061. |
||||||
Pipe# @ § |
PEX 5306 |
Radiant Floor Company/DURA-POLY XL |
ASTM F876/F877 |
|||
1/4" - 2" SDR 9 | ||||||
# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd. Insert Fittings Systems,” most current edition. @ Certified for purple color. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
||||||
Pipe@ § |
PEX 5306 |
Radiant Floor Company/DURA-POLY XL |
AWWA C904 |
|||
1/2" - 2" SDR 9 | ||||||
@ Certified for purple color. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
||||||
Pipe# @ ¢ § [1] |
PEX 5306 |
Radiant Floor Company/DURA-POLY XL |
CSA B137.5 |
|||
1/4" - 2" SDR 9 | ||||||
# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd. Insert Fittings Systems,” most current edition. @ Certified for purple color. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [1] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked, as applicable, with the following fitting system designation(s): ASTM F1807, ASTM F2159, ASSE 1061. |
||||||
Pipe# @ § |
PEX 5306 |
Vanex |
ASTM F876/F877 |
|||
1/4" - 2" SDR 9 | ||||||
# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd. Insert Fittings Systems,” most current edition. @ Certified for purple color. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
||||||
Pipe@ § |
PEX 5306 |
Vanex |
AWWA C904 |
|||
1/2" - 2" SDR 9 | ||||||
@ Certified for purple color. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
||||||
Pipe# @ ¢ § [1] |
PEX 5306 |
Vanex |
CSA B137.5 |
|||
1/4" - 2" SDR 9 | ||||||
# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd. Insert Fittings Systems,” most current edition. @ Certified for purple color. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [1] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked, as applicable, with the following fitting system designation(s): ASTM F1807, ASTM F2159, ASSE 1061. |
Product Type | Material Type | Trade Name | Product Standard | |||
Tubing# $ ? @ ^ ~ ¢ § |
PEX 5306 |
CANFLEX™ |
ASTM F876/F877 |
|||
3/8" - 2" SDR 9 | ||||||
# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd. Insert Fittings Systems,” most current edition. $ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic radiant heating system made in accordance with the current version of the ASTM F877 standard intended for a maximum 100 psi water service and a maximum working temperature of 180°F. System components consist of tubing and/or fittings. To be installed in accordance with manufacturer’s instructions and the latest edition of the Uniform Plumbing Code™. ? The UV material type 5306 is only applicable to the red, white, light blue and blue pipe. @ Certified for red, blue, white and natural colors. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ~ Accepted by NSF for use in residential and commercial construction, including manufactured housing. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
||||||
Tubing# $ @ ^ ~ ¢ § [1] |
PEX 5306 |
CANFLEX™ |
CSA B137.5 |
|||
3/8" - 2" SDR 9 | ||||||
# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd. Insert Fittings Systems,” most current edition. $ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic radiant heating system made in accordance with the current version of the ASTM F877 standard intended for a maximum 100 psi water service and a maximum working temperature of 180°F. System components consist of tubing and/or fittings. To be installed in accordance with manufacturer’s instructions and the latest edition of the Uniform Plumbing Code™. @ Certified for red, blue, white and natural colors. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ~ Accepted by NSF for use in residential and commercial construction, including manufactured housing. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [1] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked, as applicable, with the following fitting system designation(s): ASTM F1807, ASTM F2159, ASSE 1061. |
||||||
Tubing# $ ? @ ^ ~ § |
PEX 5306 |
CANPEX™ |
ASTM F876/F877 |
|||
3/8" - 2" SDR 9 | ||||||
# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd. Insert Fittings Systems,” most current edition. $ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic radiant heating system made in accordance with the current version of the ASTM F877 standard intended for a maximum 100 psi water service and a maximum working temperature of 180°F. System components consist of tubing and/or fittings. To be installed in accordance with manufacturer’s instructions and the latest edition of the Uniform Plumbing Code™. ? The UV material type 5306 is only applicable to the red, white, light blue and blue pipe. @ Certified for red, blue, white and natural colors. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ~ Accepted by NSF for use in residential and commercial construction, including manufactured housing. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
||||||
Tubing# $ @ ^ ~ ¢ § [1] |
PEX 5306 |
CANPEX™ |
CSA B137.5 |
|||
3/8" - 2" SDR 9 | ||||||
# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd. Insert Fittings Systems,” most current edition. $ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic radiant heating system made in accordance with the current version of the ASTM F877 standard intended for a maximum 100 psi water service and a maximum working temperature of 180°F. System components consist of tubing and/or fittings. To be installed in accordance with manufacturer’s instructions and the latest edition of the Uniform Plumbing Code™. @ Certified for red, blue, white and natural colors. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ~ Accepted by NSF for use in residential and commercial construction, including manufactured housing. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [1] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked, as applicable, with the following fitting system designation(s): ASTM F1807, ASTM F2159, ASSE 1061. |
||||||
Tubing! # $ % ^ ~ § |
PEX 5206 |
CanPEX Barrier |
ASTM F876/F877 |
|||
1/4" – 2" SDR 9 | ||||||
! Orange, natural, red, and teal green. # Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd. Insert Fittings Systems,” most current edition. $ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic radiant heating system made in accordance with the current version of the ASTM F877 standard intended for a maximum 100 psi water service and a maximum working temperature of 180°F. System components consist of tubing and/or fittings. To be installed in accordance with manufacturer’s instructions and the latest edition of the Uniform Plumbing Code™. % This product is barrier tubing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ~ Accepted by NSF for use in residential and commercial construction, including manufactured housing. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
||||||
Tubing! # $ % ^ ~ ¢ § [1] |
PEX 5206 |
CanPEX Barrier |
CSA B137.5 |
|||
1/4" – 2" SDR 9 | ||||||
! Orange, natural, red, and teal green. # Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd. Insert Fittings Systems,” most current edition. $ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic radiant heating system made in accordance with the current version of the ASTM F877 standard intended for a maximum 100 psi water service and a maximum working temperature of 180°F. System components consist of tubing and/or fittings. To be installed in accordance with manufacturer’s instructions and the latest edition of the Uniform Plumbing Code™. % This product is barrier tubing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ~ Accepted by NSF for use in residential and commercial construction, including manufactured housing. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [1] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked, as applicable, with the following fitting system designation(s): ASTM F1807, ASTM F2159, ASSE 1061. |
||||||
Tubing! # $ % ^ ~ § |
PEX 5206 |
CanPEX OXY Barrier |
ASTM F876/F877 |
|||
1/4" - 2" SDR 9 | ||||||
! Orange, natural, red, and teal green. # Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd. Insert Fittings Systems,” most current edition. $ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic radiant heating system made in accordance with the current version of the ASTM F877 standard intended for a maximum 100 psi water service and a maximum working temperature of 180°F. System components consist of tubing and/or fittings. To be installed in accordance with manufacturer’s instructions and the latest edition of the Uniform Plumbing Code™. % This product is barrier tubing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ~ Accepted by NSF for use in residential and commercial construction, including manufactured housing. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
||||||
Tubing! # $ % ^ ~ ¢ § [1] |
PEX 5206 |
CanPEX OXY Barrier |
CSA B137.5 |
|||
1/4" - 2" SDR 9 | ||||||
! Orange, natural, red, and teal green. # Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd. Insert Fittings Systems,” most current edition. $ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic radiant heating system made in accordance with the current version of the ASTM F877 standard intended for a maximum 100 psi water service and a maximum working temperature of 180°F. System components consist of tubing and/or fittings. To be installed in accordance with manufacturer’s instructions and the latest edition of the Uniform Plumbing Code™. % This product is barrier tubing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ~ Accepted by NSF for use in residential and commercial construction, including manufactured housing. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [1] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked, as applicable, with the following fitting system designation(s): ASTM F1807, ASTM F2159, ASSE 1061. |
||||||
Tubing# $ ^ ~ § µ |
PEX 5306 |
CanPEX Ultra |
ASTM F876/F877 |
|||
3/8" – 2" SDR 9 | ||||||
# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd. Insert Fittings Systems,” most current edition. $ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic radiant heating system made in accordance with the current version of the ASTM F877 standard intended for a maximum 100 psi water service and a maximum working temperature of 180°F. System components consist of tubing and/or fittings. To be installed in accordance with manufacturer’s instructions and the latest edition of the Uniform Plumbing Code™. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ~ Accepted by NSF for use in residential and commercial construction, including manufactured housing. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. µ Certified pipe has a black inner layer with a red, white, or blue outer layer. |
||||||
Tubing# $ ^ ~ ¢ § µ [1] |
PEX 5306 |
CanPEX Ultra |
CSA B137.5 |
|||
3/8" – 2" SDR 9 | ||||||
# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd. Insert Fittings Systems,” most current edition. $ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic radiant heating system made in accordance with the current version of the ASTM F877 standard intended for a maximum 100 psi water service and a maximum working temperature of 180°F. System components consist of tubing and/or fittings. To be installed in accordance with manufacturer’s instructions and the latest edition of the Uniform Plumbing Code™. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ~ Accepted by NSF for use in residential and commercial construction, including manufactured housing. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. µ Certified pipe has a black inner layer with a red, white, or blue outer layer. [1] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked, as applicable, with the following fitting system designation(s): ASTM F1807, ASTM F2159, ASSE 1061. |
||||||
Tubing# $ ? @ ^ ~ § |
PEX 5306 |
CANPEX™ UV |
ASTM F876/F877 |
|||
3/8" - 2" SDR 9 | ||||||
# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd. Insert Fittings Systems,” most current edition. $ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic radiant heating system made in accordance with the current version of the ASTM F877 standard intended for a maximum 100 psi water service and a maximum working temperature of 180°F. System components consist of tubing and/or fittings. To be installed in accordance with manufacturer’s instructions and the latest edition of the Uniform Plumbing Code™. ? The UV material type 5306 is only applicable to the red, white, light blue and blue pipe. @ Certified for red, blue, white and natural colors. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ~ Accepted by NSF for use in residential and commercial construction, including manufactured housing. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
||||||
Tubing# $ ? @ ^ ~ ¢ § [1] |
PEX 5306 |
CANPEX™ UV |
CSA B137.5 |
|||
3/8" - 2" SDR 9 | ||||||
# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd. Insert Fittings Systems,” most current edition. $ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic radiant heating system made in accordance with the current version of the ASTM F877 standard intended for a maximum 100 psi water service and a maximum working temperature of 180°F. System components consist of tubing and/or fittings. To be installed in accordance with manufacturer’s instructions and the latest edition of the Uniform Plumbing Code™. ? The UV material type 5306 is only applicable to the red, white, light blue and blue pipe. @ Certified for red, blue, white and natural colors. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ~ Accepted by NSF for use in residential and commercial construction, including manufactured housing. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [1] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked, as applicable, with the following fitting system designation(s): ASTM F1807, ASTM F2159, ASSE 1061. |
||||||
Tubing# $ ? @ ^ ~ § |
PEX 5306 |
CANPEX™ UV + |
ASTM F876/F877 |
|||
3/8" - 2" SDR 9 | ||||||
# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd. Insert Fittings Systems,” most current edition. $ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic radiant heating system made in accordance with the current version of the ASTM F877 standard intended for a maximum 100 psi water service and a maximum working temperature of 180°F. System components consist of tubing and/or fittings. To be installed in accordance with manufacturer’s instructions and the latest edition of the Uniform Plumbing Code™. ? The UV material type 5306 is only applicable to the red, white, light blue and blue pipe. @ Certified for red, blue, white and natural colors. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ~ Accepted by NSF for use in residential and commercial construction, including manufactured housing. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
||||||
Tubing# $ ? @ ^ ~ ¢ § [1] |
PEX 5306 |
CANPEX™ UV + |
CSA B137.5 |
|||
3/8" - 2" SDR 9 | ||||||
# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd. Insert Fittings Systems,” most current edition. $ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic radiant heating system made in accordance with the current version of the ASTM F877 standard intended for a maximum 100 psi water service and a maximum working temperature of 180°F. System components consist of tubing and/or fittings. To be installed in accordance with manufacturer’s instructions and the latest edition of the Uniform Plumbing Code™. ? The UV material type 5306 is only applicable to the red, white, light blue and blue pipe. @ Certified for red, blue, white and natural colors. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ~ Accepted by NSF for use in residential and commercial construction, including manufactured housing. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [1] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked, as applicable, with the following fitting system designation(s): ASTM F1807, ASTM F2159, ASSE 1061. |
||||||
Tubing# $ ? @ ^ ~ § |
PEX 5306 |
CANPEX™ UV + MD |
ASTM F876/F877 |
|||
3/8" - 2" SDR 9 | ||||||
# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd. Insert Fittings Systems,” most current edition. $ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic radiant heating system made in accordance with the current version of the ASTM F877 standard intended for a maximum 100 psi water service and a maximum working temperature of 180°F. System components consist of tubing and/or fittings. To be installed in accordance with manufacturer’s instructions and the latest edition of the Uniform Plumbing Code™. ? The UV material type 5306 is only applicable to the red, white, light blue and blue pipe. @ Certified for red, blue, white and natural colors. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ~ Accepted by NSF for use in residential and commercial construction, including manufactured housing. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
||||||
Tubing# $ ? @ ^ ~ ¢ § [1] |
PEX 5306 |
CANPEX™ UV + MD |
CSA B137.5 |
|||
3/8" - 2" SDR 9 | ||||||
# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd. Insert Fittings Systems,” most current edition. $ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic radiant heating system made in accordance with the current version of the ASTM F877 standard intended for a maximum 100 psi water service and a maximum working temperature of 180°F. System components consist of tubing and/or fittings. To be installed in accordance with manufacturer’s instructions and the latest edition of the Uniform Plumbing Code™. ? The UV material type 5306 is only applicable to the red, white, light blue and blue pipe. @ Certified for red, blue, white and natural colors. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ~ Accepted by NSF for use in residential and commercial construction, including manufactured housing. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [1] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked, as applicable, with the following fitting system designation(s): ASTM F1807, ASTM F2159, ASSE 1061. |
||||||
Tubing# $ ? @ ^ ~ § |
PEX 5306 |
CANPEX™ UV Plus |
ASTM F876/F877 |
|||
3/8" - 2' SDR 9 | ||||||
# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd. Insert Fittings Systems,” most current edition. $ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic radiant heating system made in accordance with the current version of the ASTM F877 standard intended for a maximum 100 psi water service and a maximum working temperature of 180°F. System components consist of tubing and/or fittings. To be installed in accordance with manufacturer’s instructions and the latest edition of the Uniform Plumbing Code™. ? The UV material type 5306 is only applicable to the red, white, light blue and blue pipe. @ Certified for red, blue, white and natural colors. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ~ Accepted by NSF for use in residential and commercial construction, including manufactured housing. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
||||||
Tubing# $ ? @ ^ ~ ¢ § [1] |
PEX 5306 |
CANPEX™ UV Plus |
CSA B137.5 |
|||
3/8" - 2" SDR 9 | ||||||
# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd. Insert Fittings Systems,” most current edition. $ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic radiant heating system made in accordance with the current version of the ASTM F877 standard intended for a maximum 100 psi water service and a maximum working temperature of 180°F. System components consist of tubing and/or fittings. To be installed in accordance with manufacturer’s instructions and the latest edition of the Uniform Plumbing Code™. ? The UV material type 5306 is only applicable to the red, white, light blue and blue pipe. @ Certified for red, blue, white and natural colors. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ~ Accepted by NSF for use in residential and commercial construction, including manufactured housing. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [1] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked, as applicable, with the following fitting system designation(s): ASTM F1807, ASTM F2159, ASSE 1061. |
||||||
Tubing# $ ? @ ^ ~ § |
PEX 5306 |
CANPEX™ UV Plus MD |
ASTM F876/F877 |
|||
3/8" - 2" SDR 9 | ||||||
# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd. Insert Fittings Systems,” most current edition. $ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic radiant heating system made in accordance with the current version of the ASTM F877 standard intended for a maximum 100 psi water service and a maximum working temperature of 180°F. System components consist of tubing and/or fittings. To be installed in accordance with manufacturer’s instructions and the latest edition of the Uniform Plumbing Code™. ? The UV material type 5306 is only applicable to the red, white, light blue and blue pipe. @ Certified for red, blue, white and natural colors. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ~ Accepted by NSF for use in residential and commercial construction, including manufactured housing. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
||||||
Tubing# $ ? @ ^ ~ ¢ § [1] |
PEX 5306 |
CANPEX™ UV Plus MD |
CSA B137.5 |
|||
3/8" - 2" SDR 9 | ||||||
# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd. Insert Fittings Systems,” most current edition. $ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic radiant heating system made in accordance with the current version of the ASTM F877 standard intended for a maximum 100 psi water service and a maximum working temperature of 180°F. System components consist of tubing and/or fittings. To be installed in accordance with manufacturer’s instructions and the latest edition of the Uniform Plumbing Code™. ? The UV material type 5306 is only applicable to the red, white, light blue and blue pipe. @ Certified for red, blue, white and natural colors. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ~ Accepted by NSF for use in residential and commercial construction, including manufactured housing. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [1] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked, as applicable, with the following fitting system designation(s): ASTM F1807, ASTM F2159, ASSE 1061. |
||||||
Tubing# $ ? @ ^ ~ § |
PEX 5306 |
CANPLUMB™ |
ASTM F876/F877 |
|||
3/8" - 2" SDR 9 | ||||||
# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd. Insert Fittings Systems,” most current edition. $ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic radiant heating system made in accordance with the current version of the ASTM F877 standard intended for a maximum 100 psi water service and a maximum working temperature of 180°F. System components consist of tubing and/or fittings. To be installed in accordance with manufacturer’s instructions and the latest edition of the Uniform Plumbing Code™. ? The UV material type 5306 is only applicable to the red, white, light blue and blue pipe. @ Certified for red, blue, white and natural colors. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ~ Accepted by NSF for use in residential and commercial construction, including manufactured housing. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
||||||
Tubing# $ @ ^ ~ ¢ § [1] |
PEX 5306 |
CANPLUMB™ |
CSA B137.5 |
|||
3/8" - 2" SDR 9 | ||||||
# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd. Insert Fittings Systems,” most current edition. $ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic radiant heating system made in accordance with the current version of the ASTM F877 standard intended for a maximum 100 psi water service and a maximum working temperature of 180°F. System components consist of tubing and/or fittings. To be installed in accordance with manufacturer’s instructions and the latest edition of the Uniform Plumbing Code™. @ Certified for red, blue, white and natural colors. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ~ Accepted by NSF for use in residential and commercial construction, including manufactured housing. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [1] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked, as applicable, with the following fitting system designation(s): ASTM F1807, ASTM F2159, ASSE 1061. |
||||||
Tubing! # $ % ^ ~ § |
PEX 5206 |
CanRay |
ASTM F876/F877 |
|||
1/4" – 2" SDR 9 | ||||||
! Orange, natural, red, and teal green. # Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd. Insert Fittings Systems,” most current edition. $ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic radiant heating system made in accordance with the current version of the ASTM F877 standard intended for a maximum 100 psi water service and a maximum working temperature of 180°F. System components consist of tubing and/or fittings. To be installed in accordance with manufacturer’s instructions and the latest edition of the Uniform Plumbing Code™. % This product is barrier tubing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ~ Accepted by NSF for use in residential and commercial construction, including manufactured housing. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
||||||
Tubing! # $ % ^ ~ ¢ § [1] |
PEX 5206 |
CanRay |
CSA B137.5 |
|||
1/4" – 2" SDR 9 | ||||||
! Orange, natural, red, and teal green. # Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd. Insert Fittings Systems,” most current edition. $ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic radiant heating system made in accordance with the current version of the ASTM F877 standard intended for a maximum 100 psi water service and a maximum working temperature of 180°F. System components consist of tubing and/or fittings. To be installed in accordance with manufacturer’s instructions and the latest edition of the Uniform Plumbing Code™. % This product is barrier tubing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ~ Accepted by NSF for use in residential and commercial construction, including manufactured housing. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [1] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked, as applicable, with the following fitting system designation(s): ASTM F1807, ASTM F2159, ASSE 1061. |
||||||
Tubing! # $ % ^ ~ § Þ |
PEX 5206 |
Embassy / LiquiPEX w/O2 Barrier |
ASTM F876/F877 |
|||
1/4" – 2" SDR 9 | ||||||
! Orange, natural, red, and teal green. # Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd. Insert Fittings Systems,” most current edition. $ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic radiant heating system made in accordance with the current version of the ASTM F877 standard intended for a maximum 100 psi water service and a maximum working temperature of 180°F. System components consist of tubing and/or fittings. To be installed in accordance with manufacturer’s instructions and the latest edition of the Uniform Plumbing Code™. % This product is barrier tubing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ~ Accepted by NSF for use in residential and commercial construction, including manufactured housing. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. Þ Product is Certified to the International Plumbing Code. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the International Plumbing Code. |
||||||
Tubing! # $ % ^ ~ ¢ § Þ [1] |
PEX 5206 |
Embassy / LiquiPEX w/O2 Barrier |
CSA B137.5 |
|||
1/4" – 2" SDR 9 | ||||||
! Orange, natural, red, and teal green. # Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd. Insert Fittings Systems,” most current edition. $ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic radiant heating system made in accordance with the current version of the ASTM F877 standard intended for a maximum 100 psi water service and a maximum working temperature of 180°F. System components consist of tubing and/or fittings. To be installed in accordance with manufacturer’s instructions and the latest edition of the Uniform Plumbing Code™. % This product is barrier tubing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ~ Accepted by NSF for use in residential and commercial construction, including manufactured housing. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. Þ Product is Certified to the International Plumbing Code. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the International Plumbing Code. [1] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked, as applicable, with the following fitting system designation(s): ASTM F1807, ASTM F2159, ASSE 1061. |
||||||
Tubing# $ ? @ ^ ~ § |
PEX 5306 |
LYNX-PEX |
ASTM F876/F877 |
|||
1/4" - 2" SDR 9 | ||||||
# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd. Insert Fittings Systems,” most current edition. $ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic radiant heating system made in accordance with the current version of the ASTM F877 standard intended for a maximum 100 psi water service and a maximum working temperature of 180°F. System components consist of tubing and/or fittings. To be installed in accordance with manufacturer’s instructions and the latest edition of the Uniform Plumbing Code™. ? The UV material type 5306 is only applicable to the red, white, light blue and blue pipe. @ Certified for red, blue, white and natural colors. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ~ Accepted by NSF for use in residential and commercial construction, including manufactured housing. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
||||||
Tubing? @ ^ ~ § |
PEX 5306 |
LYNX-PEX |
AWWA C904 |
|||
1/2" - 2" SDR 9 | ||||||
? The UV material type 5306 is only applicable to the red, white, light blue and blue pipe. @ Certified for red, blue, white and natural colors. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ~ Accepted by NSF for use in residential and commercial construction, including manufactured housing. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
||||||
Tubing# $ ? @ ^ ~ ¢ § [1] |
PEX 5306 |
LYNX-PEX |
CSA B137.5 |
|||
1/4" - 2" SDR 9 | ||||||
# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd. Insert Fittings Systems,” most current edition. $ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic radiant heating system made in accordance with the current version of the ASTM F877 standard intended for a maximum 100 psi water service and a maximum working temperature of 180°F. System components consist of tubing and/or fittings. To be installed in accordance with manufacturer’s instructions and the latest edition of the Uniform Plumbing Code™. ? The UV material type 5306 is only applicable to the red, white, light blue and blue pipe. @ Certified for red, blue, white and natural colors. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ~ Accepted by NSF for use in residential and commercial construction, including manufactured housing. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [1] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked, as applicable, with the following fitting system designation(s): ASTM F1807, ASTM F2159, ASSE 1061. |
||||||
Tubing# $ ? @ ^ ~ |
PEX 5306 |
Radiant Floor Company/ DURA-POLY XL |
ASTM F876/F877 |
|||
3/8" - 2" SDR 9 | ||||||
# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd. Insert Fittings Systems,” most current edition. $ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic radiant heating system made in accordance with the current version of the ASTM F877 standard intended for a maximum 100 psi water service and a maximum working temperature of 180°F. System components consist of tubing and/or fittings. To be installed in accordance with manufacturer’s instructions and the latest edition of the Uniform Plumbing Code™. ? The UV material type 5306 is only applicable to the red, white, light blue and blue pipe. @ Certified for red, blue, white and natural colors. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ~ Accepted by NSF for use in residential and commercial construction, including manufactured housing. |
||||||
Tubing# $ ? @ ^ ~ ¢ § [1] |
PEX 5306 |
Radiant Floor Company/ DURA-POLY XL |
CSA B137.5 |
|||
3/8" - 2" SDR 9 | ||||||
# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd. Insert Fittings Systems,” most current edition. $ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic radiant heating system made in accordance with the current version of the ASTM F877 standard intended for a maximum 100 psi water service and a maximum working temperature of 180°F. System components consist of tubing and/or fittings. To be installed in accordance with manufacturer’s instructions and the latest edition of the Uniform Plumbing Code™. ? The UV material type 5306 is only applicable to the red, white, light blue and blue pipe. @ Certified for red, blue, white and natural colors. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ~ Accepted by NSF for use in residential and commercial construction, including manufactured housing. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [1] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked, as applicable, with the following fitting system designation(s): ASTM F1807, ASTM F2159, ASSE 1061. |
||||||
Tubing! # $ % ^ ~ § |
PEX 5206 |
Radiant Floor Company/ DURA-POLY XL |
ASTM F876/F877 |
|||
1/4" - 2" SDR 9 | ||||||
! Orange, natural, red, and teal green. # Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd. Insert Fittings Systems,” most current edition. $ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic radiant heating system made in accordance with the current version of the ASTM F877 standard intended for a maximum 100 psi water service and a maximum working temperature of 180°F. System components consist of tubing and/or fittings. To be installed in accordance with manufacturer’s instructions and the latest edition of the Uniform Plumbing Code™. % This product is barrier tubing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ~ Accepted by NSF for use in residential and commercial construction, including manufactured housing. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
||||||
Tubing! # $ % ^ ~ ¢ § [1] |
PEX 5206 |
Radiant Floor Company/ DURA-POLY XL |
CSA B137.5 |
|||
1/4" - 2" SDR 9 | ||||||
! Orange, natural, red, and teal green. # Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd. Insert Fittings Systems,” most current edition. $ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic radiant heating system made in accordance with the current version of the ASTM F877 standard intended for a maximum 100 psi water service and a maximum working temperature of 180°F. System components consist of tubing and/or fittings. To be installed in accordance with manufacturer’s instructions and the latest edition of the Uniform Plumbing Code™. % This product is barrier tubing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ~ Accepted by NSF for use in residential and commercial construction, including manufactured housing. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [1] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked, as applicable, with the following fitting system designation(s): ASTM F1807, ASTM F2159, ASSE 1061. |
||||||
Tubing! # $ % ^ ~ § |
PEX 5206 |
Radiantec Company Inc. / Radiantec |
ASTM F876/F877 |
|||
1/2" - 3/4" SDR 9 | ||||||
! Orange, natural, red, and teal green. # Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd. Insert Fittings Systems,” most current edition. $ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic radiant heating system made in accordance with the current version of the ASTM F877 standard intended for a maximum 100 psi water service and a maximum working temperature of 180°F. System components consist of tubing and/or fittings. To be installed in accordance with manufacturer’s instructions and the latest edition of the Uniform Plumbing Code™. % This product is barrier tubing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ~ Accepted by NSF for use in residential and commercial construction, including manufactured housing. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
||||||
Tubing! # $ % ^ ~ § |
PEX 5206 |
RadiantMax |
ASTM F876/F877 |
|||
1/4" – 2" SDR 9 | ||||||
! Orange, natural, red, and teal green. # Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd. Insert Fittings Systems,” most current edition. $ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic radiant heating system made in accordance with the current version of the ASTM F877 standard intended for a maximum 100 psi water service and a maximum working temperature of 180°F. System components consist of tubing and/or fittings. To be installed in accordance with manufacturer’s instructions and the latest edition of the Uniform Plumbing Code™. % This product is barrier tubing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ~ Accepted by NSF for use in residential and commercial construction, including manufactured housing. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
||||||
Tubing! # $ % ^ ~ ¢ § [1] |
PEX 5206 |
RadiantMax |
CSA B137.5 |
|||
1/4" – 2" SDR 9 | ||||||
! Orange, natural, red, and teal green. # Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd. Insert Fittings Systems,” most current edition. $ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic radiant heating system made in accordance with the current version of the ASTM F877 standard intended for a maximum 100 psi water service and a maximum working temperature of 180°F. System components consist of tubing and/or fittings. To be installed in accordance with manufacturer’s instructions and the latest edition of the Uniform Plumbing Code™. % This product is barrier tubing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ~ Accepted by NSF for use in residential and commercial construction, including manufactured housing. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [1] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked, as applicable, with the following fitting system designation(s): ASTM F1807, ASTM F2159, ASSE 1061. |
||||||
Tubing# $ ? @ ^ ~ § |
PEX 5306 |
Vanex |
ASTM F876/F877 |
|||
3/8" - 2" SDR 9 | ||||||
# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd. Insert Fittings Systems,” most current edition. $ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic radiant heating system made in accordance with the current version of the ASTM F877 standard intended for a maximum 100 psi water service and a maximum working temperature of 180°F. System components consist of tubing and/or fittings. To be installed in accordance with manufacturer’s instructions and the latest edition of the Uniform Plumbing Code™. ? The UV material type 5306 is only applicable to the red, white, light blue and blue pipe. @ Certified for red, blue, white and natural colors. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ~ Accepted by NSF for use in residential and commercial construction, including manufactured housing. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
||||||
Tubing# $ @ ^ ~ ¢ § [1] |
PEX 5306 |
Vanex |
CSA B137.5 |
|||
3/8" - 2" SDR 9 | ||||||
# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd. Insert Fittings Systems,” most current edition. $ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic radiant heating system made in accordance with the current version of the ASTM F877 standard intended for a maximum 100 psi water service and a maximum working temperature of 180°F. System components consist of tubing and/or fittings. To be installed in accordance with manufacturer’s instructions and the latest edition of the Uniform Plumbing Code™. @ Certified for red, blue, white and natural colors. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ~ Accepted by NSF for use in residential and commercial construction, including manufactured housing. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [1] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked, as applicable, with the following fitting system designation(s): ASTM F1807, ASTM F2159, ASSE 1061. |
||||||
Tubing! # $ % ^ ~ § |
PEX 5206 |
Vanex Barrier |
ASTM F876/F877 |
|||
1/4" – 2" SDR 9 | ||||||
! Orange, natural, red, and teal green. # Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd. Insert Fittings Systems,” most current edition. $ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic radiant heating system made in accordance with the current version of the ASTM F877 standard intended for a maximum 100 psi water service and a maximum working temperature of 180°F. System components consist of tubing and/or fittings. To be installed in accordance with manufacturer’s instructions and the latest edition of the Uniform Plumbing Code™. % This product is barrier tubing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ~ Accepted by NSF for use in residential and commercial construction, including manufactured housing. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
||||||
Tubing! # $ % ^ ~ ¢ § [1] |
PEX 5206 |
Vanex Barrier |
CSA B137.5 |
|||
1/4" – 2" SDR 9 | ||||||
! Orange, natural, red, and teal green. # Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd. Insert Fittings Systems,” most current edition. $ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic radiant heating system made in accordance with the current version of the ASTM F877 standard intended for a maximum 100 psi water service and a maximum working temperature of 180°F. System components consist of tubing and/or fittings. To be installed in accordance with manufacturer’s instructions and the latest edition of the Uniform Plumbing Code™. % This product is barrier tubing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ~ Accepted by NSF for use in residential and commercial construction, including manufactured housing. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [1] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked, as applicable, with the following fitting system designation(s): ASTM F1807, ASTM F2159, ASSE 1061. |
||||||
Tubing# $ ^ ~ § µ |
PEX 5306 |
Vanex Ultra |
ASTM F876/F877 |
|||
3/8" – 2" SDR 9 | ||||||
# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd. Insert Fittings Systems,” most current edition. $ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic radiant heating system made in accordance with the current version of the ASTM F877 standard intended for a maximum 100 psi water service and a maximum working temperature of 180°F. System components consist of tubing and/or fittings. To be installed in accordance with manufacturer’s instructions and the latest edition of the Uniform Plumbing Code™. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ~ Accepted by NSF for use in residential and commercial construction, including manufactured housing. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. µ Certified pipe has a black inner layer with a red, white, or blue outer layer. |
||||||
Tubing# $ ^ ~ ¢ § µ [1] |
PEX 5306 |
Vanex Ultra |
CSA B137.5 |
|||
3/8" – 2" SDR 9 | ||||||
# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd. Insert Fittings Systems,” most current edition. $ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic radiant heating system made in accordance with the current version of the ASTM F877 standard intended for a maximum 100 psi water service and a maximum working temperature of 180°F. System components consist of tubing and/or fittings. To be installed in accordance with manufacturer’s instructions and the latest edition of the Uniform Plumbing Code™. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ~ Accepted by NSF for use in residential and commercial construction, including manufactured housing. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. µ Certified pipe has a black inner layer with a red, white, or blue outer layer. [1] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked, as applicable, with the following fitting system designation(s): ASTM F1807, ASTM F2159, ASSE 1061. |
Cirque Sales & Distribution, Inc | |
13504 Northeast 84th Street | |
Suite 103-267 | |
Vancover, WA 98682 | |
United States | |
888-710-6667 | |
360-326-7003 |
Facility : # 1 USA
Product Type | Material Type | Trade Name | Product Standard | |||
Pipe* ^ § +++ [G] |
PEX 1306 |
SafePEX® Pro Blue UV-Shield |
ASTM F876/F877 |
|||
3/8" - 2" SDR 9 | ||||||
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Pipe* ^ ¢ § +++ [G] |
PEX |
SafePEX® Pro Blue UV-Shield |
CSA B137.5 |
|||
3/8" - 2" SDR 9 | ||||||
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Pipe* ^ § +++ [G] |
PEX 1306 |
SafePEX® Pro Red UV-Shield |
ASTM F876/F877 |
|||
3/8" - 2" SDR 9 | ||||||
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Pipe* ^ ¢ § +++ [G] |
PEX |
SafePEX® Pro Red UV-Shield |
CSA B137.5 |
|||
3/8" - 2" SDR 9 | ||||||
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Pipe* ^ § +++ [G] |
PEX 1306 |
SafePEX® Pro White UV-Shield |
ASTM F876/F877 |
|||
3/8" - 2" SDR 9 | ||||||
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Pipe* ^ ¢ § +++ [G] |
PEX |
SafePEX® Pro White UV-Shield |
CSA B137.5 |
|||
3/8" - 2" SDR 9 | ||||||
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
$ Non-barrier pipe.
EFIELD USA INC. | |
16281 Gale Avenue | |
City of Industry, CA 91789 | |
United States | |
9095519262 |
Facility : Zhejiang, China
Product Type | Material Type | Trade Name | Product Standard | |||
Fittings¢ § [1] |
PEX |
EFIELD |
ASTM F1960 |
|||
Pex Expansion Ring 3/8" | ||||||
Pex Expansion Ring 1/2" | ||||||
Pex Expansion Ring 5/8" | ||||||
Pex Expansion Ring 3/4" | ||||||
Pex Expansion Ring 1" | ||||||
Pex Expansion Ring 1 1/4" | ||||||
Pex Expansion Ring 1 1/2" | ||||||
Pex Expansion Ring 2" | ||||||
Pex Expansion Ring 2 1/2" | ||||||
Pex Expansion Ring 3" | ||||||
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [1] Product is a non-wetted fitting component. |
||||||
Fittings¢ § [1] |
PEX |
EFIELD |
CSA B137.5 |
|||
Pex Expansion Ring 3/8" | ||||||
Pex Expansion Ring 1/2" | ||||||
Pex Expansion Ring 5/8" | ||||||
Pex Expansion Ring 3/4" | ||||||
Pex Expansion Ring 1" | ||||||
Pex Expansion Ring 1 1/4" | ||||||
Pex Expansion Ring 1 1/2" | ||||||
Pex Expansion Ring 2" | ||||||
Pex Expansion Ring 2 1/2" | ||||||
Pex Expansion Ring 3" | ||||||
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [1] Product is a non-wetted fitting component. |
EFIELD USA INC. | |
16281 Gale Ave. | |
City of Industry, CA 91745 | |
United States | |
86-15858694965 |
Facility : Prey Nob District, Cambodia
Product Type | Material Type | Trade Name | Product Standard | |||
Pipe! § +++ [G] |
PEX 5306 |
EFIELD |
ASTM F876/F877 |
|||
1/4" - 2" | ||||||
! Certified for natural, red, white and blue without oxygen barrier. Natural-PEX 5006; red, white, blue- PEX 5306 § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Tubing! ¢ § +++ [1] [G] |
PEX 5306 |
EFIELD |
CSA B137.5 |
|||
1/4" - 2" | ||||||
! Certified for natural, red, white and blue without oxygen barrier. Natural-PEX 5006; red, white, blue- PEX 5306 ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [1] Pipe Certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked with the following fitting system designations: ASTM F1807, ASTM F2159. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Fittings[2] |
PEX |
EFIELD |
CSA B137.5 |
|||
One Plus PEX Ring with stop |
||||||
3/8" - 3" | ||||||
[2] PEX rings are non-wetted components of PEX fitting systems. |
||||||
Fittings[2] |
PEX |
EFIELD |
ASTM F1960 |
|||
One Plus PEX Ring with stop |
||||||
3/8" - 3" | ||||||
[2] PEX rings are non-wetted components of PEX fitting systems. |
Product Type | Material Type | Trade Name | Product Standard | |||
Pipe! § +++ [G] |
PEX 5306 |
EFIELD |
ASTM F876/F877 |
|||
1/4" - 2" | ||||||
! Certified for natural, red, white and blue without oxygen barrier. Natural-PEX 5006; red, white, blue- PEX 5306 § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Tubing! ¢ § +++ [1] [G] |
PEX 5306 |
EFIELD |
CSA B137.5 |
|||
1/4" - 2" | ||||||
! Certified for natural, red, white and blue without oxygen barrier. Natural-PEX 5006; red, white, blue- PEX 5306 ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [1] Pipe Certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked with the following fitting system designations: ASTM F1807, ASTM F2159. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Fittings[2] |
PEX |
EFIELD |
ASTM F1960 |
|||
One Plus PEX Ring with stop |
||||||
3/8" - 3" | ||||||
[2] PEX rings are non-wetted components of PEX fitting systems. |
||||||
Fittings[2] |
PEX |
EFIELD |
CSA B137.5 |
|||
One Plus PEX Ring with stop |
||||||
3/8" - 3" | ||||||
[2] PEX rings are non-wetted components of PEX fitting systems. |
Elkhart Supply Corporation | |
1126 Kent Street | |
Elkhart, IN 46514-1740 | |
United States | |
574-264-4156 |
Facility : # 1 USA
Product Type | Material Type | Trade Name | Product Standard | |||
Pipe* ^ § +++ [G] |
PEX 1306 |
SafePEX® Pro Blue UV-Shield |
ASTM F876/F877 |
|||
3/8" - 2" SDR 9 | ||||||
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Pipe* ^ ¢ § +++ [G] |
PEX |
SafePEX® Pro Blue UV-Shield |
CSA B137.5 |
|||
3/8" - 2" SDR 9 | ||||||
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Pipe* ^ § +++ [G] |
PEX 1306 |
SafePEX® Pro Red UV-Shield |
ASTM F876/F877 |
|||
3/8" - 2" SDR 9 | ||||||
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Pipe* ^ ¢ § +++ [G] |
PEX |
SafePEX® Pro Red UV-Shield |
CSA B137.5 |
|||
3/8" - 2" SDR 9 | ||||||
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Pipe* ^ § +++ [G] |
PEX 1306 |
SafePEX® Pro White UV-Shield |
ASTM F876/F877 |
|||
3/8" - 2" SDR 9 | ||||||
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Pipe* ^ ¢ § +++ [G] |
PEX |
SafePEX® Pro White UV-Shield |
CSA B137.5 |
|||
3/8" - 2" SDR 9 | ||||||
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
$ Non-barrier pipe.
Embassy Industries, Inc. | |
10 Hub Drive | |
Melville, NY 11747 | |
United States | |
631-694-1800 | |
Visit this company's website |
Facility : Middlefield, OH
Product Type | Material Type | Trade Name | Product Standard | |||
Tubing# * @ ^ ¢ § |
PEX 5006 |
Embassy LiquiPEX |
ASTM F876/F877 |
|||
3/8" - 1" SDR 9 | ||||||
# Authorized for blue, gray, natural, orange, red, and white. * Product is barrier tubing. @ Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
||||||
Tubing# & * @ ¢ |
PEX |
Embassy LiquiPEX |
CSA B137.5 |
|||
3/8" - 1" SDR 9 | ||||||
# Authorized for blue, gray, natural, orange, red, and white. & Tubing certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked, if applicable, with the following fitting system designations: ASTM F1807, ASTM F2159, ASTM F2098, ASTM F2080, ASSE 1061 and ASTM F1960. * Product is barrier tubing. @ Accepted by NSF for use in residential and commercial construction, including manufactured housing. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. |
Everflow Supplies Inc. | |
100 Middlesex Avenue | |
Carteret, NJ 07008 | |
United States | |
908-436-1100 |
Facility : Foshan, China
Product Type | Material Type | Trade Name | Product Standard | ||||
Tubing$ * ^ § +++ [G] |
PEX 5006 |
PEXFLOW™ |
ASTM F876/F877 |
||||
>= 1/8" SDR 9 | |||||||
$ Certified for blue and red without oxygen barrier. * Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
|||||||
Tubing$ * ^ § +++ [3] [G] |
PEX |
PEXFLOW™ |
CSA B137.5 |
||||
>= 1/8" SDR 9 | |||||||
$ Certified for blue and red without oxygen barrier. * Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [3] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked with the following fitting system designations: ASTM F1807, ASTM F2159, ASTM F1960, F2098. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
|||||||
Tubing$ * ^ § +++ |
PEX 5006 |
PEXFLOW™ |
ASTM F876/F877 |
||||
1/2" - 1" SDR 9 | |||||||
$ Certified for blue and red without oxygen barrier. * Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). |
|||||||
Tubing$ * ^ ¢ § +++ |
PEX |
PEXFLOW™ |
CSA B137.5 |
||||
1/2" - 1" SDR 9 | |||||||
$ Certified for blue and red without oxygen barrier. * Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). |
|||||||
Tubing& * ^ ~ ¢ +++ [G] |
PEX 5106[6] |
Everflow |
CSA B137.5 |
||||
>= 1/8" SDR 9 |
|||||||
PFW-R12100 | PFW-B12100 | PFW-W12100 | PFW-R12300 | ||||
PFW-B12300 | PFW-W12300 | PFW-R12500 | PFW-B12500 | ||||
PFW-W12500 | PFW-R34100 | PFW-B34100 | PFW-W34100 | ||||
PFW-R34300 | PFW-B34300 | PFW-W34300 | PFW-R34500 | ||||
PFW-B34500 | PFW-W34500 | PFW-B1100 | PFW-R1100 | ||||
PFW-W1100 | PFW-R1300 | PFW-B1300 | PFW-W1300 | ||||
PFW-R1500 | PFW-B1500 | PFW-W1500 | PFW-R1220 | ||||
PFW-B1220 | PFW-W1220 | PFW-R3420 | PFW-B3420 | ||||
PFW-W3420 | PFW-R120 | PFW-B120 | PFW-W120 | ||||
PFW-R1210 | PFW-B1210 | PFW-W1210 | PFW-R3410 | ||||
PFW-B3410 | PFW-W3410 | PFW-R110 | PFW-B110 | ||||
PFW-W110 | |||||||
& Meets the chlorine resistance requirements of ASTM F1281 when tested in accordance with ASTM F2023. * Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ~ Certified for Natural non-barrier single layer tubing for 1/8 - 3" sizes. Certified for red, white, blue 2-layer tubing for 1/2", 5/8", 3/4", 1" sizes only. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [6] Certified for red and white PEX 5106 monowall pipe. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
|||||||
Tubing* ^ ¢ +++ [G] |
PEX 5106[6] |
Everflow |
ASTM F876/877 |
||||
>= 1/8" SDR 9 |
|||||||
PFW-R12100 | PFW-B12100 | PFW-W12100 | PFW-R12300 | ||||
PFW-B12300 | PFW-W12300 | PFW-R12500 | PFW-B12500 | ||||
PFW-W12500 | PFW-R34100 | PFW-B34100 | PFW-W34100 | ||||
PFW-R34300 | PFW-B34300 | PFW-W34300 | PFW-R34500 | ||||
PFW-B34500 | PFW-W34500 | PFW-B1100 | PFW-R1100 | ||||
PFW-W1100 | PFW-R1300 | PFW-B1300 | PFW-W1300 | ||||
PFW-R1500 | PFW-B1500 | PFW-W1500 | PFW-R1220 | ||||
PFW-B1220 | PFW-W1220 | PFW-R3420 | PFW-B3420 | ||||
PFW-W3420 | PFW-R120 | PFW-B120 | PFW-W120 | ||||
PFW-R1210 | PFW-B1210 | PFW-W1210 | PFW-R3410 | ||||
PFW-B3410 | PFW-W3410 | PFW-R110 | PFW-B110 | ||||
PFW-W110 | |||||||
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [6] Certified for red and white PEX 5106 monowall pipe. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
|||||||
Fittings[4] [G] |
PEX |
Everflow |
ASTM F1960 |
||||
PEX Ring with Stop |
|||||||
3/8" - 2" | |||||||
[4] This is a PEX sleeve certified to ASTM F1960 & CSA B137.5. This is a non wetted product. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
|||||||
Fittings[4] [G] |
PEX |
Everflow |
CSA B137.5 |
||||
PEX Ring with Stop |
|||||||
3/8" - 2" | |||||||
[4] This is a PEX sleeve certified to ASTM F1960 & CSA B137.5. This is a non wetted product. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
|||||||
Tubing! * ^ § +++ [G] |
PEX 5106 |
Everflow |
ASTM F876/877 |
||||
1/8" - 6" SDR 9 |
|||||||
PFW-R12100 | PFW-B12100 | PFW-W12100 | PFW-R12300 | ||||
PFW-B12300 | PFW-W12300 | PFW-R12500 | PFW-B12500 | ||||
PFW-W12500 | PFW-R34100 | PFW-B34100 | PFW-W34100 | ||||
PFW-R34300 | PFW-B34300 | PFW-W34300 | PFW-R34500 | ||||
PFW-B34500 | PFW-W34500 | PFW-B1100 | PFW-R1100 | ||||
PFW-W1100 | PFW-R1300 | PFW-B1300 | PFW-W1300 | ||||
PFW-R1500 | PFW-B1500 | PFW-W1500 | PFW-R1220 | ||||
PFW-B1220 | PFW-W1220 | PFW-R3420 | PFW-B3420 | ||||
PFW-W3420 | PFW-R120 | PFW-B120 | PFW-W120 | ||||
PFW-R1210 | PFW-B1210 | PFW-W1210 | PFW-R3410 | ||||
PFW-B3410 | PFW-W3410 | PFW-R110 | PFW-B110 | ||||
PFW-W110 | |||||||
! Certified for natural, red, white and blue without oxygen barrier. Natural - 5006 Red, white, blue - 5006, 5106, 5206 * Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
|||||||
Tubing! * ^ § +++ [G] |
PEX 5106 |
Everflow |
CSA B137.5 |
||||
1/8" - 6" SDR 9 |
|||||||
PFW-R12100 | PFW-B12100 | PFW-W12100 | PFW-R12300 | ||||
PFW-B12300 | PFW-W12300 | PFW-R12500 | PFW-B12500 | ||||
PFW-W12500 | PFW-R34100 | PFW-B34100 | PFW-W34100 | ||||
PFW-R34300 | PFW-B34300 | PFW-W34300 | PFW-R34500 | ||||
PFW-B34500 | PFW-W34500 | PFW-B1100 | PFW-R1100 | ||||
PFW-W1100 | PFW-R1300 | PFW-B1300 | PFW-W1300 | ||||
PFW-R1500 | PFW-B1500 | PFW-W1500 | PFW-R1220 | ||||
PFW-B1220 | PFW-W1220 | PFW-R3420 | PFW-B3420 | ||||
PFW-W3420 | PFW-R120 | PFW-B120 | PFW-W120 | ||||
PFW-R1210 | PFW-B1210 | PFW-W1210 | PFW-R3410 | ||||
PFW-B3410 | PFW-W3410 | PFW-R110 | PFW-B110 | ||||
PFW-W110 | |||||||
! Certified for natural, red, white and blue without oxygen barrier. Natural - 5006 Red, white, blue - 5006, 5106, 5206 * Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
|||||||
Tubing* ^ ¢ +++ [G] |
PEX 5106[7] |
Everflow |
ASTM F876/877 |
||||
3/8" - 1" |
|||||||
PFW-R12100 | PFW-B12100 | PFW-W12100 | PFW-R12300 | ||||
PFW-B12300 | PFW-W12300 | PFW-R12500 | PFW-B12500 | ||||
PFW-W12500 | PFW-R34100 | PFW-B34100 | PFW-W34100 | ||||
PFW-R34300 | PFW-B34300 | PFW-W34300 | PFW-R34500 | ||||
PFW-B34500 | PFW-W34500 | PFW-B1100 | PFW-R1100 | ||||
PFW-W1100 | PFW-R1300 | PFW-B1300 | PFW-W1300 | ||||
PFW-R1500 | PFW-B1500 | PFW-W1500 | PFW-R1220 | ||||
PFW-B1220 | PFW-W1220 | PFW-R3420 | PFW-B3420 | ||||
PFW-W3420 | PFW-R120 | PFW-B120 | PFW-W120 | ||||
PFW-R1210 | PFW-B1210 | PFW-W1210 | PFW-R3410 | ||||
PFW-B3410 | PFW-W3410 | PFW-R110 | PFW-B110 | ||||
PFW-W110 | |||||||
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [7] Certified for the following: 2-layer skinned (Natural PEX – White PE) pipe [PEX 5106]: 3/8", 1/2", 5/8",3/4" & 1" 2-layer skinned (Natural PEX – Red, White or Blue PE) pipe [PEX 5306]: 3/8", 1/2", 5/8",3/4" & 1" [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
|||||||
Tubing* ^ ~ ¢ +++ [G] |
PEX 5106[8] |
Everflow |
ASTM F876/877 |
||||
1/2", 5/8", 3/4", 1" | |||||||
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ~ Certified for Natural non-barrier single layer tubing for 1/8 - 3" sizes. Certified for red, white, blue 2-layer tubing for 1/2", 5/8", 3/4", 1" sizes only. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [8] PEX 5106 Certified for Red, Blue ,White 2-layer for 1/2", 5/8", 3/4", 1" sizes only. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
|||||||
Tubing* ^ ~ ¢ +++ [5] [G] |
PEX 5106[8] |
Everflow |
CSA B137.5 |
||||
1/2", 5/8", 3/4", 1" | |||||||
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ~ Certified for Natural non-barrier single layer tubing for 1/8 - 3" sizes. Certified for red, white, blue 2-layer tubing for 1/2", 5/8", 3/4", 1" sizes only. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [5] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked with the following fitting system designations: ASTM F1807, ASTM F2159. [8] PEX 5106 Certified for Red, Blue ,White 2-layer for 1/2", 5/8", 3/4", 1" sizes only. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
|||||||
Tubing& * ^ ~ ¢ +++ [5] [G] |
PEX 5006 |
Everflow |
CSA B137.5 |
||||
1/8" - 3" | |||||||
& Meets the chlorine resistance requirements of ASTM F1281 when tested in accordance with ASTM F2023. * Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ~ Certified for Natural non-barrier single layer tubing for 1/8 - 3" sizes. Certified for red, white, blue 2-layer tubing for 1/2", 5/8", 3/4", 1" sizes only. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [5] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked with the following fitting system designations: ASTM F1807, ASTM F2159. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
Product Type | Material Type | Trade Name | Product Standard | ||||
Tubing& * ^ ~ ¢ +++ |
PEX 5106[7] [8] |
Everflow |
CSA B137.5 |
||||
PFR-R1100 | |||||||
PFR-R120 | |||||||
PFR-R12100 | |||||||
PFR-R121000 | |||||||
PFR-R121200 | |||||||
PFR-R1220 | |||||||
PFR-R12300 | |||||||
PFR-R12500 | |||||||
PFR-R1300 | |||||||
PFR-R1500 | |||||||
PFR-R34100 | |||||||
PFR-R341000 | |||||||
PFR-R3420 | |||||||
PFR-R34300 | |||||||
PFR-R34500 | |||||||
PFR-R38100 | |||||||
PFR-R38300 | |||||||
PFR-R58100 | |||||||
PFR-R58500 | |||||||
& Meets the chlorine resistance requirements of ASTM F1281 when tested in accordance with ASTM F2023. * Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ~ Certified for Natural non-barrier single layer tubing for 1/8 - 3" sizes. Certified for red, white, blue 2-layer tubing for 1/2", 5/8", 3/4", 1" sizes only. Certified for red, white, blue, orange,natural 3-layer tubing for 1/2", 5/8", 3/4", 1" sizes only. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [7] Certified for red and white PEX 5106 monowall pipe. [8] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer and shall be marked with the following fitting system designations: ASTM F1807, ASTM F2159, ASTM F1960, ASTM F2080, ASTM F2098 and ASSE 1061. |
|||||||
Tubing* ^ ¢ +++ |
PEX 5106[7] |
Everflow |
ASTM F876/877 |
||||
>= 1/8" |
|||||||
PFR-R1100 | PFR-R120 | PFR-R12100 | PFR-R121000 | ||||
PFR-R121200 | PFR-R1220 | PFR-R12300 | PFR-R12500 | ||||
PFR-R1300 | PFR-R1500 | PFR-R34100 | PFR-R341000 | ||||
PFR-R3420 | PFR-R34300 | PFR-R34500 | PFR-R38100 | ||||
PFR-R38300 | PFR-R58100 | PFR-R58500 | |||||
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [7] Certified for red and white PEX 5106 monowall pipe. |
|||||||
Fittings[6] |
PEX |
Everflow |
ASTM F1960 |
||||
PEX Ring with Stop |
|||||||
3/8" - 2" | |||||||
[6] This is a PEX sleeve certified to ASTM F1960 & CSA B137.5. This is a non wetted product. |
|||||||
Fittings[6] |
PEX |
Everflow |
CSA B137.5 |
||||
PEX Ring with Stop |
|||||||
3/8" - 2" | |||||||
[6] This is a PEX sleeve certified to ASTM F1960 & CSA B137.5. This is a non wetted product. |
|||||||
Tubing$ * ¢ § [8] |
PEX |
Everflow |
CSA B137.5 |
||||
>= 1/8" SDR 9 |
|||||||
PFR-R1100 | PFR-R120 | PFR-R12100 | PFR-R121000 | ||||
PFR-R121200 | PFR-R1220 | PFR-R12300 | PFR-R12500 | ||||
PFR-R1300 | PFR-R1500 | PFR-R34100 | PFR-R341000 | ||||
PFR-R3420 | PFR-R34300 | PFR-R34500 | PFR-R38100 | ||||
PFR-R38300 | PFR-R58100 | PFR-R58500 | |||||
$ Certified for blue and red with oxygen barrier. * Accepted by NSF for use in residential and commercial construction, including manufactured housing. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [8] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer and shall be marked with the following fitting system designations: ASTM F1807, ASTM F2159, ASTM F1960, ASTM F2080, ASTM F2098 and ASSE 1061. |
|||||||
Tubing! * ^ § |
PEX 5106 |
Everflow |
ASTM F876/877 |
||||
>= 1/8" SDR 9 |
|||||||
PFR-R1100 | PFR-R120 | PFR-R12100 | PFR-R121000 | ||||
PFR-R121200 | PFR-R1220 | PFR-R12300 | PFR-R12500 | ||||
PFR-R1300 | PFR-R1500 | PFR-R34100 | PFR-R341000 | ||||
PFR-R3420 | PFR-R34300 | PFR-R34500 | PFR-R38100 | ||||
PFR-R38300 | PFR-R58100 | PFR-R58500 | |||||
! Certified for natural, red, white and blue without oxygen barrier. Natural - 5006 Red, white, blue - 5006, 5106, 5206 * Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
|||||||
Tubing! * ^ § |
PEX 5106 |
Everflow |
AWWA C904 |
||||
1/2" - 1 1/2" SDR 9 |
|||||||
PFR-R1100 | PFR-R120 | PFR-R12100 | PFR-R121000 | ||||
PFR-R121200 | PFR-R1220 | PFR-R12300 | PFR-R12500 | ||||
PFR-R1300 | PFR-R1500 | PFR-R34100 | PFR-R341000 | ||||
PFR-R3420 | PFR-R34300 | PFR-R34500 | PFR-R38100 | ||||
PFR-R38300 | PFR-R58100 | PFR-R58500 | |||||
! Certified for natural, red, white and blue without oxygen barrier. Natural - 5006 Red, white, blue - 5006, 5106, 5206 * Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
|||||||
Tubing! * ^ § |
PEX 5106 |
Everflow |
CSA B137.5 |
||||
>= 1/8" SDR 9 |
|||||||
PFR-R1100 | PFR-R120 | PFR-R12100 | PFR-R121000 | ||||
PFR-R121200 | PFR-R1220 | PFR-R12300 | PFR-R12500 | ||||
PFR-R1300 | PFR-R1500 | PFR-R34100 | PFR-R341000 | ||||
PFR-R3420 | PFR-R34300 | PFR-R34500 | PFR-R38100 | ||||
PFR-R38300 | PFR-R58100 | PFR-R58500 | |||||
! Certified for natural, red, white and blue without oxygen barrier. Natural - 5006 Red, white, blue - 5006, 5106, 5206 * Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
|||||||
Tubing* ^ ~ ¢ +++ [G] |
PEX 5006 |
Everflow |
ASTM F876/877 |
||||
1/8" - 3" | |||||||
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ~ Certified for Natural non-barrier single layer tubing for 1/8 - 3" sizes. Certified for red, white, blue 2-layer tubing for 1/2", 5/8", 3/4", 1" sizes only. Certified for red, white, blue, orange,natural 3-layer tubing for 1/2", 5/8", 3/4", 1" sizes only. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
|||||||
Tubing* ^ ~ ¢ +++ [G] |
PEX 5106[5] |
Everflow |
ASTM F876/877 |
||||
1/2", 5/8", 3/4", 1" | |||||||
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ~ Certified for Natural non-barrier single layer tubing for 1/8 - 3" sizes. Certified for red, white, blue 2-layer tubing for 1/2", 5/8", 3/4", 1" sizes only. Certified for red, white, blue, orange,natural 3-layer tubing for 1/2", 5/8", 3/4", 1" sizes only. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [5] PEX 5106 Certified for Red, Blue ,White 2-layer for 1/2", 5/8", 3/4", 1" sizes only. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
|||||||
Tubing* ^ ~ ¢ +++ [G] |
PEX 5006[4] |
Everflow |
CSA B137.5 |
||||
1/8" - 3" | |||||||
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ~ Certified for Natural non-barrier single layer tubing for 1/8 - 3" sizes. Certified for red, white, blue 2-layer tubing for 1/2", 5/8", 3/4", 1" sizes only. Certified for red, white, blue, orange,natural 3-layer tubing for 1/2", 5/8", 3/4", 1" sizes only. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [4] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked with the following fitting system designations: ASTM F1807, ASTM F2159, ASTM F1960, F2098. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
|||||||
Tubing* ^ ~ ¢ +++ [5] [G] |
PEX 5106[4] |
Everflow |
CSA B137.5 |
||||
1/2", 5/8", 3/4", 1" | |||||||
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ~ Certified for Natural non-barrier single layer tubing for 1/8 - 3" sizes. Certified for red, white, blue 2-layer tubing for 1/2", 5/8", 3/4", 1" sizes only. Certified for red, white, blue, orange,natural 3-layer tubing for 1/2", 5/8", 3/4", 1" sizes only. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [4] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked with the following fitting system designations: ASTM F1807, ASTM F2159, ASTM F1960, F2098. [5] PEX 5106 Certified for Red, Blue ,White 2-layer for 1/2", 5/8", 3/4", 1" sizes only. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
|||||||
Tubing$ * § |
PEX 5006 |
PEXFLOW™ |
ASTM F876/F877 |
||||
1/2" - 1" SDR 9 | |||||||
$ Certified for blue and red with oxygen barrier. * Accepted by NSF for use in residential and commercial construction, including manufactured housing. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
|||||||
Tubing$ * ¢ § |
PEX |
PEXFLOW™ |
CSA B137.5 |
||||
1/2" - 1" SDR 9 | |||||||
$ Certified for blue and red with oxygen barrier. * Accepted by NSF for use in residential and commercial construction, including manufactured housing. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
|||||||
Tubing$ * § |
PEX 5006 |
PEXFLOW™ |
ASTM F876/F877 |
||||
>= 1/8" SDR 9 | |||||||
$ Certified for blue and red with oxygen barrier. * Accepted by NSF for use in residential and commercial construction, including manufactured housing. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
|||||||
Tubing$ * ¢ § [4] |
PEX |
PEXFLOW™ |
CSA B137.5 |
||||
>= 1/8" SDR 9 | |||||||
$ Certified for blue and red with oxygen barrier. * Accepted by NSF for use in residential and commercial construction, including manufactured housing. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [4] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked with the following fitting system designations: ASTM F1807, ASTM F2159, ASTM F1960, F2098. |
|||||||
Tubing$ * § |
PEX 5006 |
PEXFLOW™ |
ASTM F876/F877 |
||||
>= 1/8" SDR 9 | |||||||
$ Certified for blue and red with oxygen barrier. * Accepted by NSF for use in residential and commercial construction, including manufactured housing. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
Everflow Supplies, Inc. | |
100 Middlesex Avenue | |
Carteret, NJ 07008 | |
United States | |
877-941-7800 | |
908-436-1100 | |
Visit this company's website |
Facility : Barcelona, Spain
Product Type | Material Type | Trade Name | Product Standard | |||
Pipe* @ ¢ § +++ [G] |
PEX 5106 |
PEXFLOW |
ASTM F876/F877 |
|||
3/8" - 2" | ||||||
* Natural (Solid Wall) PEX Pipe Certified 3/8" - 2"sizes. Red, blue, white or orange PEX pipe (2 layer pipe - natural with colored adhesive pipe) certified for 3/8" - 1" sizes. Tubing certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked, as applicable, with the following fitting system designation(s): ASTM F1960, ASTM F1807, ASTM F2159, and ASTM F2098. @ PEX 5106: Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Pipe* @ ¢ § +++ [G] |
PEX 5106 |
PEXFLOW |
CSA B137.5 |
|||
3/8" - 2" | ||||||
* Natural (Solid Wall) PEX Pipe Certified 3/8" - 2"sizes. Red, blue, white or orange PEX pipe (2 layer pipe - natural with colored adhesive pipe) certified for 3/8" - 1" sizes. Tubing certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked, as applicable, with the following fitting system designation(s): ASTM F1960, ASTM F1807, ASTM F2159, and ASTM F2098. @ PEX 5106: Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or documentation shipped with the product are Certified.
Product Type | Material Type | Trade Name | Product Standard | |||
Tubing* @ ¢ § |
PEX 5106 |
PEXFLOW |
CSA B137.5 |
|||
3/8" - 2" | ||||||
* Monowall pipe (natural); Skinned pipe (red, blue, white and orange); and Barrier pipe (red, blue, white and orange) are certified for the following sizes: 3/8", 1/2", 5/8", 3/4", 1", 1 1/2", & 2". Tubing certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked, as applicable with the following fitting system designation(s): ASTM F1960, ASTM F1807, ASTM F2159, and ASTM F2098 @ This tubing product has been evaluated against the performance requirements of ASTM F876/877 and CSA which the tubing is recommended by the B137.5. This product is not NSF Certified for use in a potable water distribution system. This product has been evaluated for use in radiant floor heating, (NSF-rfh), applications only ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
||||||
Tubing* @ ¢ § |
PEX 5106 |
PEXFLOW |
ASTM F876/F877 |
|||
3/8" - 2" | ||||||
* Monowall pipe (natural); Skinned pipe (red, blue, white and orange); and Barrier pipe (red, blue, white and orange) are certified for the following sizes: 3/8", 1/2", 5/8", 3/4", 1", 1 1/2", & 2". Tubing certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked, as applicable with the following fitting system designation(s): ASTM F1960, ASTM F1807, ASTM F2159, and ASTM F2098 @ This tubing product has been evaluated against the performance requirements of ASTM F876/877 and CSA which the tubing is recommended by the B137.5. This product is not NSF Certified for use in a potable water distribution system. This product has been evaluated for use in radiant floor heating, (NSF-rfh), applications only ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or documentation shipped with the product are Certified.
Everhot Inc. | |
5407 Foster Avenue | |
Brooklyn, NY 11234 | |
United States | |
347-492-7660 |
Facility : # 1 China
Product Type | Material Type | Trade Name | Product Standard | |||
Tubing# $ * |
PEX |
Everhot |
ASTM E84 |
|||
3/8", 1/2" - 2" |
||||||
Flame Spread Index <= 25 | Smoke Developed Index <= 50 | |||||
# The Flame Spread Index and Smoke Developed Index for 1/2"-2" tubing are based on when tubing is field insulated with 1/2" JM Microlok HP Hi performance fiberglass insulation as per RIFENG installation instructions. The 3/8" tubing is not insulated. $ Certified for blue, natural, red, and white without oxygen barrier. * Flame Spread Index and Smoke Developed Index based on minimum spacing of 18 inches between tubing runs. Tubing shall be marked [NSF®-fs ASTM E84 FS<=25/SD<=50]. |
||||||
Tubing$ & |
PEX |
Everhot |
CAN/ULC S102.2 |
|||
3/8", 1/2" - 2" |
||||||
Flame Spread Rating <= 25 | Smoke Developed Classification <= 50 | |||||
$ Certified for blue, natural, red, and white without oxygen barrier. & 3/8" tubing (without insulation) shall be marked [cNSF®-fs ULc S102.2 FS <=25/SD <=50]. 1/2" - 2" tubing (with insulation), Flame Spread Index and Smoke Developed Index based on when the tubing is field insulated with JM Microlok HP Hi Performance Fiberglass insulation as per the pipe manufacturer's installation instructions. Tubing shall be Marked [cNSF®-fs ULc S102.2 FS<=25/SD<=50]. |
Product Type | Material Type | Trade Name | Product Standard | |||
Tubing$ * ^ ¢ § +++ [G] |
PEX |
Everhot |
CSA B137.5 |
|||
>= 1/8" SDR 9 | ||||||
$ Certified for blue, natural, red, and white without oxygen barrier. * Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Tubing! * ^ § +++ [G] |
PEX 5106 |
Everhot |
ASTM F876/F877 |
|||
1/8" - 6" SDR 9 | ||||||
! Certified for natural, red, white and blue without oxygen barrier. Natural - 5006 Red, white, blue - 5006, 5106, 5206 * Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Tubing! * ^ § +++ [G] |
PEX 5106 |
Everhot |
CSA B137.5 |
|||
1/8" - 6" SDR 9 | ||||||
! Certified for natural, red, white and blue without oxygen barrier. Natural - 5006 Red, white, blue - 5006, 5106, 5206 * Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
Product Type | Material Type | Trade Name | Product Standard | |||
Tubing$ * ¢ § |
PEX |
Everhot |
CSA B137.5 |
|||
>= 1/8" SDR 9 | ||||||
$ Certified for blue, natural, red, and white with oxygen barrier. * Accepted by NSF for use in residential and commercial construction, including manufactured housing. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
||||||
Tubing$ * § |
PEX 5006 |
Everhot |
ASTM F876/F877 |
|||
>= 1/8" SDR 9 | ||||||
$ Certified for blue, natural, red, and white with oxygen barrier. * Accepted by NSF for use in residential and commercial construction, including manufactured housing. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
EZ Flo International | |
1605 Research Circle | |
Rockwall, TX 75032 | |
United States | |
800-486-5256 | |
Visit this company's website |
Facility : # 2 USA
Product Type | Material Type | Trade Name | Product Standard | |||
Tubing# @ ^ § +++ [G] |
PEX 5106 |
Eastman® PEX |
ASTM F876/F877 |
|||
1/8" - 1 1/4" SDR 9 | ||||||
# Authorized for gray and white. @ Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Tubing@ ^ § +++ [G] |
PEX 5106 |
Eastman® PEX |
ASTM F876/F877 |
|||
1/8" CTS x 1/4" OD SDR 9 | ||||||
@ Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Tubing# & @ ¢ +++ [G] |
PEX 5106 |
Eastman® PEX |
CSA B137.5 |
|||
1/8" - 1 1/4" SDR 9 | ||||||
# Authorized for gray and white. & Tubing certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked, if applicable, with the following fitting system designations: ASTM F1807, ASTM F2159, ASTM F2098, ASTM F2080, ASSE 1061 and ASTM F1960. @ Accepted by NSF for use in residential and commercial construction, including manufactured housing. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Tubing& @ ¢ +++ [G] |
PEX 5106 |
Eastman® PEX |
CSA B137.5 |
|||
1/8" CTS x 1/4" OD SDR 9 | ||||||
& Tubing certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked, if applicable, with the following fitting system designations: ASTM F1807, ASTM F2159, ASTM F2098, ASTM F2080, ASSE 1061 and ASTM F1960. @ Accepted by NSF for use in residential and commercial construction, including manufactured housing. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Tubing# @ ^ § +++ [G] |
PEX 5106 |
Merflex PEX |
ASTM F876/F877 |
|||
1/8" - 1 1/4" SDR 9 | ||||||
# Authorized for gray and white. @ Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Tubing@ ^ § +++ [G] |
PEX 5106 |
Merflex PEX |
ASTM F876/F877 |
|||
1/8" CTS x 1/4" OD SDR 9 | ||||||
@ Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Tubing# & @ ¢ +++ [G] |
PEX 5106 |
Merflex PEX |
CSA B137.5 |
|||
1/8" - 1 1/4" SDR 9 | ||||||
# Authorized for gray and white. & Tubing certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked, if applicable, with the following fitting system designations: ASTM F1807, ASTM F2159, ASTM F2098, ASTM F2080, ASSE 1061 and ASTM F1960. @ Accepted by NSF for use in residential and commercial construction, including manufactured housing. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Tubing& @ ¢ +++ [G] |
PEX 5106 |
Merflex PEX |
CSA B137.5 |
|||
1/8" CTS x 1/4" OD SDR 9 | ||||||
& Tubing certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked, if applicable, with the following fitting system designations: ASTM F1807, ASTM F2159, ASTM F2098, ASTM F2080, ASSE 1061 and ASTM F1960. @ Accepted by NSF for use in residential and commercial construction, including manufactured housing. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
Finproject S.p.A. | |
Compounding BU – Roccabianca Plant | |
Via Paganina 3 | |
I-43010 Roccabianca (PR) | |
Italy | |
0039 0521 5291 |
Facility : Roccabianca, Italy
Material Type | End Use | Trade Name | Product Standard |
PEX 3006$ * +++ | 1 | Polidan T/A + Catalyst Masterbatch PS/2 | N/A |
PEX 3006$ * +++ | 1 | Polidan T/A + Catalyst Masterbatch PS/4 | N/A |
PEX 3006$ * +++ | 1 | Polidan T/A HF + Catalyst Masterbatch PS/2 | N/A |
PEX 3006$ * +++ | 1 | olidan T/A HF + Catalyst Masterbatch PS/4 | N/A |
$ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. * Tubing manufactured using this material is cure process dependent. Use of this material in NSF Certified tubing requires NSF's prior authorization. Tubing produced from this material was tested to the performance requirements of ASTM F876. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). |
GE Appliances, a Haier Company | |
Appliance Park | |
Louisville, KY 40225 | |
United States | |
502-452-3332 | |
Visit this company's website |
Facility : # 1 USA
Product Type | Material Type | Trade Name | Product Standard | |||
Refrigerator Supply Line# & ¢ § [G] |
PEX |
GE Appliances |
ASME A112.18.6/CSA B125.6 |
|||
1/8" C.T.S. | ||||||
# This product may be marked via a flag type label. & Certified up to 8 feet in length. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
Golan Renewable Industries Ltd. | |
Kibbutz Shaar Hagolan | |
M.P. Jordan Valley 15145 | |
Israel | |
972 46 677432 | |
Visit this company's website |
Facility : Jordan Valley, Israel
Product Type | Material Type | Trade Name | Product Standard | |||
Tubing |
PEX 0006 |
Pexgol PE-Xa Black |
ASTM F2905 |
|||
3" - 18" SDR 7.3 | ||||||
3" - 20" SDR 8.3 | ||||||
3" - 24" SDR 9 | ||||||
3" - 36" SDR 11 | ||||||
3" - 36" SDR 13.5 | ||||||
3" - 48" SDR 15.5 | ||||||
3" - 54" SDR 17 | ||||||
3" - 54" SDR 21 | ||||||
16 mm - 355 mm SDR 6 | ||||||
16 mm - 450 mm SDR 7.4 | ||||||
16 mm - 800 mm SDR 9 | ||||||
16 mm - 630 mm SDR 11 | ||||||
16 mm - 630 mm SDR 13.6 | ||||||
16 mm - 630 mm SDR 16.2 | ||||||
16 mm - 630 mm SDR 17 | ||||||
16 mm - 630 mm SDR 21 |
Product Type | Material Type | Trade Name | Product Standard | |||
Pipe^ § $$ +++ |
PEX 5106 |
AquaHeat PE-Xa Natural |
ASTM F876/F877 |
|||
3/8" - 1" DR 9 | ||||||
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. $$ These products may also be produced with a clear, blue, orange or red barrier material on the outer layer of the tubing. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). |
||||||
Pipe* ^ ¢ $$ +++ |
PEX 3106 |
AquaHeat PE-Xa Natural |
ASTM F2788/F2788M |
|||
1/2" - 14" SDR 6 DR 6 | ||||||
16 mm - 355 mm DR 6 | ||||||
1/2" - 18" DR 7.4 | ||||||
16 mm - 450 mm DR 7.4 | ||||||
1/2" - 25" DR 9 | ||||||
16 mm - 630 mm DR 9 | ||||||
3/4" - 25" DR 11 | ||||||
20 mm - 630 mm DR 11 | ||||||
1" - 25" DR 13.6 | ||||||
25 mm - 630 mm DR 13.6 | ||||||
1 1/4" - 25" DR 16.2 | ||||||
32 mm - 630 mm DR 16.2 | ||||||
1 1/4" - 25" DR 17 | ||||||
32 mm - 630 mm DR 17 | ||||||
* Barrier Pipes only Certified up to 160mm (6"). ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. $$ These products may also be produced with a clear, blue, orange or red barrier material on the outer layer of the tubing. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). |
||||||
Pipe^ ¢ § $$ +++ |
PEX 3106 |
AquaHeat PE-Xa Natural |
ASTM F876/F877 |
|||
3/8" - 6" DR 9 | ||||||
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. $$ These products may also be produced with a clear, blue, orange or red barrier material on the outer layer of the tubing. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). |
||||||
Pipe# ^ ¢ § $$ +++ |
PEX 3106 |
AquaHeat PE-Xa Natural |
CSA B137.5 |
|||
3/8" - 6" DR 9 | ||||||
# Tubing certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be qualified through testing. Please verify that tubing certified against CSA B137.5 is only marked with the following fitting system designation(s): ASTM F877, ASTM F2080, ASTM F1960. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. $$ These products may also be produced with a clear, blue, orange or red barrier material on the outer layer of the tubing. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). |
||||||
Pipe# ^ ¢ § $$ +++ |
PEX 5106 |
AquaHeat PE-Xa Natural |
CSA B137.5 |
|||
3/8" - 1" DR 9 | ||||||
# Tubing certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be qualified through testing. Please verify that tubing certified against CSA B137.5 is only marked with the following fitting system designation(s): ASTM F877, ASTM F2080, ASTM F1960. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. $$ These products may also be produced with a clear, blue, orange or red barrier material on the outer layer of the tubing. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). |
||||||
Pipe$ * ^ +++ |
PEX 5006 |
AquaHeat PE-Xc Black |
ASTM F2788/F2788M |
|||
1/2" - 1" DR 6 | ||||||
16 mm - 25 mm DR 6 | ||||||
1/2" - 1" DR 7.4 | ||||||
16 mm - 25 mm DR 7.4 | ||||||
1/2" - 1" DR 9 | ||||||
$ These products may also be produced with a blue, clear, or red barrier material on the outer layer of the tubing. * Barrier Pipes only Certified up to 160mm (6"). ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). |
||||||
Pipe$ * ^ +++ |
PEX 5006 |
AquaHeat PE-Xc Blue |
ASTM F2788/F2788M |
|||
1/2" - 1" DR 6 | ||||||
16 mm - 25 mm DR 6 | ||||||
1/2" - 1" DR 7.4 | ||||||
16 mm - 25 mm DR 7.4 | ||||||
1/2" - 1" DR 9 | ||||||
16 mm - 25 mm DR 9 | ||||||
3/4" - 1" DR 11 | ||||||
20 mm - 25 mm DR 11 | ||||||
1" DR 13.6 | ||||||
25 mm DR 13.6 | ||||||
$ These products may also be produced with a blue, clear, or red barrier material on the outer layer of the tubing. * Barrier Pipes only Certified up to 160mm (6"). ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). |
||||||
Pipe$ * ^ +++ |
PEX 5006 |
AquaHeat PE-Xc Natural |
ASTM F2788/F2788M |
|||
1/2" - 1" DR 6 | ||||||
16 mm - 25 mm DR 6 | ||||||
1/2" - 1" DR 7.4 | ||||||
16 mm - 25 mm DR 7.4 | ||||||
1/2" - 1" DR 9 | ||||||
16 mm - 25 mm DR 9 | ||||||
3/4" - 1" DR 11 | ||||||
20 mm - 25 mm DR 11 | ||||||
1" DR 13.6 | ||||||
25 mm DR 13.6 | ||||||
$ These products may also be produced with a blue, clear, or red barrier material on the outer layer of the tubing. * Barrier Pipes only Certified up to 160mm (6"). ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). |
||||||
Pipe$ * ^ +++ |
PEX 5006 |
AquaHeat PE-Xc Red |
ASTM F2788/F2788M |
|||
1/2" - 1" DR 6 | ||||||
16 mm - 25 mm DR 6 | ||||||
1/2" - 1" DR 7.4 | ||||||
16 mm - 25 mm DR 7.4 | ||||||
1/2" - 1" DR 9 | ||||||
16 mm - 25 mm DR 9 | ||||||
3/4" - 1" DR 11 | ||||||
20 mm - 25 mm DR 11 | ||||||
1" DR 13.6 | ||||||
25 mm DR 13.6 | ||||||
$ These products may also be produced with a blue, clear, or red barrier material on the outer layer of the tubing. * Barrier Pipes only Certified up to 160mm (6"). ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). |
||||||
Pipe* ^ ¢ $$ +++ |
PEX 3106 |
AquaSeal PE-Xa Natural |
ASTM F2788/F2788M |
|||
1/2" - 14" DR 6 | ||||||
16 mm - 355 mm DR 6 | ||||||
1/2" - 18" DR 7.4 | ||||||
16 mm - 450 mm DR 7.4 | ||||||
1/2" - 25" SDR 9 | ||||||
16 mm - 630 mm SDR 9 | ||||||
3/4" - 25" SDR 11 | ||||||
20 mm - 630 mm SDR 11 | ||||||
1" - 25" DR 13.6 | ||||||
25 mm - 630 mm DR 13.6 | ||||||
1 1/4" - 25" DR 16.2 | ||||||
32 mm - 630 mm DR 16.2 | ||||||
1 1/4" - 25" SDR 17 | ||||||
32 mm - 630 mm SDR 17 | ||||||
* Barrier Pipes only Certified up to 160mm (6"). ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. $$ These products may also be produced with a clear, blue, orange or red barrier material on the outer layer of the tubing. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). |
||||||
Pipe^ ¢ § $$ +++ |
PEX 3106 |
AquaSeal PE-Xa Natural |
ASTM F876/F877 |
|||
3/8" - 6" SDR 9 | ||||||
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. $$ These products may also be produced with a clear, blue, orange or red barrier material on the outer layer of the tubing. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). |
||||||
Pipe^ § $$ +++ |
PEX 5106 |
AquaSeal PE-Xa Natural |
ASTM F876/F877 |
|||
3/8" - 1" DR 9 | ||||||
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. $$ These products may also be produced with a clear, blue, orange or red barrier material on the outer layer of the tubing. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). |
||||||
Pipe# ^ ¢ § $$ +++ |
PEX 3106 |
AquaSeal PE-Xa Natural |
CSA B137.5 |
|||
3/8" - 6" SDR 9 | ||||||
# Tubing certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be qualified through testing. Please verify that tubing certified against CSA B137.5 is only marked with the following fitting system designation(s): ASTM F877, ASTM F2080, ASTM F1960. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. $$ These products may also be produced with a clear, blue, orange or red barrier material on the outer layer of the tubing. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). |
||||||
Pipe# ^ ¢ § $$ +++ |
PEX 5106 |
AquaSeal PE-Xa Natural |
CSA B137.5 |
|||
3/8" - 1" DR 9 | ||||||
# Tubing certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be qualified through testing. Please verify that tubing certified against CSA B137.5 is only marked with the following fitting system designation(s): ASTM F877, ASTM F2080, ASTM F1960. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. $$ These products may also be produced with a clear, blue, orange or red barrier material on the outer layer of the tubing. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). |
||||||
Pipe$ * ^ +++ |
PEX 5006 |
AquaSeal PE-Xc Black |
ASTM F2788/F2788M |
|||
1/2" - 1" DR 6 | ||||||
16 mm - 25 mm DR 6 | ||||||
1/2" - 1" DR 7.4 | ||||||
16 mm - 25 mm DR 7.4 | ||||||
1/2" - 1" SDR 9 | ||||||
16 mm - 25 mm SDR 9 | ||||||
3/4" - 1" SDR 11 | ||||||
20 mm - 25 mm SDR 11 | ||||||
1" DR 13.6 | ||||||
25 mm DR 13.6 | ||||||
$ These products may also be produced with a blue, clear, or red barrier material on the outer layer of the tubing. * Barrier Pipes only Certified up to 160mm (6"). ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). |
||||||
Pipe$ * ^ +++ |
PEX 5006 |
AquaSeal PE-Xc Blue |
ASTM F2788 |
|||
1/2" - 1" DR 6 | ||||||
16 mm - 25 mm DR 6 | ||||||
1/2" - 1" DR 7.4 | ||||||
16 mm - 25 mm DR 7.4 | ||||||
1/2" - 1" SDR 9 | ||||||
16 mm - 25 mm SDR 9 | ||||||
3/4" - 1" SDR 11 | ||||||
20 mm - 25 mm SDR 11 | ||||||
1" DR 13.6 | ||||||
25 mm DR 13.6 | ||||||
$ These products may also be produced with a blue, clear, or red barrier material on the outer layer of the tubing. * Barrier Pipes only Certified up to 160mm (6"). ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). |
||||||
Pipe$ * ^ +++ |
PEX 5006 |
AquaSeal PE-Xc Natural |
ASTM F2788/F2788M |
|||
1/2" - 1" DR 6 | ||||||
16 mm - 25 mm DR 6 | ||||||
1/2" - 1" DR 7.4 | ||||||
16 mm - 25 mm DR 7.4 | ||||||
1/2" - 1" SDR 9 | ||||||
16 mm - 25 mm SDR 9 | ||||||
3/4" - 1" SDR 11 | ||||||
20 mm - 25 mm SDR 11 | ||||||
1" DR 13.6 | ||||||
25 mm DR 13.6 | ||||||
$ These products may also be produced with a blue, clear, or red barrier material on the outer layer of the tubing. * Barrier Pipes only Certified up to 160mm (6"). ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). |
||||||
Pipe$ * ^ +++ |
PEX 5006 |
AquaSeal PE-Xc Red |
ASTM F2788/F2788M |
|||
1/2" - 1" DR 6 | ||||||
16 mm - 25 mm DR 6 | ||||||
1/2" - 1" DR 7.4 | ||||||
16 mm - 25 mm DR 7.4 | ||||||
1/2" - 1" SDR 9 | ||||||
16 mm - 25 mm SDR 9 | ||||||
3/4" - 1" SDR 11 | ||||||
20 mm - 25 mm SDR 11 | ||||||
1" DR 13.6 | ||||||
25 mm DR 13.6 | ||||||
$ These products may also be produced with a blue, clear, or red barrier material on the outer layer of the tubing. * Barrier Pipes only Certified up to 160mm (6"). ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). |
||||||
Pipe* ^ ¢ $$ +++ |
PEX 3106 |
HeatFlow PEX PE-Xa Natural |
ASTM F2788/F2788M |
|||
1/2" - 14" DR 6 | ||||||
16 mm - 355 mm DR 6 | ||||||
1/2" - 18" DR 7.4 | ||||||
16 mm - 450 mm DR 7.4 | ||||||
1/2" - 25" SDR 9 | ||||||
16 mm - 630 mm SDR 9 | ||||||
3/4" - 25" SDR 11 | ||||||
20 mm - 630 mm SDR 11 | ||||||
1" - 25" DR 13.6 | ||||||
25 mm - 630 mm DR 13.6 | ||||||
1 1/4" - 25" DR 16.2 | ||||||
32 mm - 630 mm DR 16.2 | ||||||
1 1/4" - 25" SDR 17 | ||||||
32 mm - 630 mm SDR 17 | ||||||
* Barrier Pipes only Certified up to 160mm (6"). ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. $$ These products may also be produced with a clear, blue, orange or red barrier material on the outer layer of the tubing. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). |
||||||
Pipe^ ¢ $$ +++ |
PEX 3106 |
HeatFlow PEX PE-Xa Natural |
ASTM F876/F877 |
|||
3/8" - 6" SDR 9 | ||||||
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. $$ These products may also be produced with a clear, blue, orange or red barrier material on the outer layer of the tubing. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). |
||||||
Pipe^ § $$ +++ |
PEX 5106 |
HeatFlow PEX PE-Xa Natural |
ASTM F876/F877 |
|||
3/8" - 1" DR 9 | ||||||
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. $$ These products may also be produced with a clear, blue, orange or red barrier material on the outer layer of the tubing. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). |
||||||
Pipe# ^ ¢ § $$ +++ |
PEX 5106 |
HeatFlow PEX PE-Xa Natural |
CSA B137.5 |
|||
3/8" - 1" DR 9 | ||||||
# Tubing certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be qualified through testing. Please verify that tubing certified against CSA B137.5 is only marked with the following fitting system designation(s): ASTM F877, ASTM F2080, ASTM F1960. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. $$ These products may also be produced with a clear, blue, orange or red barrier material on the outer layer of the tubing. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). |
||||||
Pipe# ^ ¢ § $$ +++ |
PEX 3106 |
HeatFlow PEX PE-Xa Natural |
CSA B137.5 |
|||
3/8" - 6" SDR 9 | ||||||
# Tubing certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be qualified through testing. Please verify that tubing certified against CSA B137.5 is only marked with the following fitting system designation(s): ASTM F877, ASTM F2080, ASTM F1960. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. $$ These products may also be produced with a clear, blue, orange or red barrier material on the outer layer of the tubing. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). |
||||||
Pipe$ * ^ +++ |
PEX 5006 |
HeatFlow PEX PE-Xc Black |
ASTM F2788/F2788M |
|||
1/2" - 1" DR 6 | ||||||
16 mm - 25 mm DR 6 | ||||||
1/2" - 1" DR 7.4 | ||||||
16 mm - 25 mm DR 7.4 | ||||||
1/2" - 1" SDR 9 | ||||||
16 mm - 25 mm SDR 9 | ||||||
3/4" - 1" SDR 11 | ||||||
20 mm - 25 mm SDR 11 | ||||||
1" DR 13.6 | ||||||
25 mm DR 13.6 | ||||||
$ These products may also be produced with a blue, clear, or red barrier material on the outer layer of the tubing. * Barrier Pipes only Certified up to 160mm (6"). ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). |
||||||
Pipe$ * ^ +++ |
PEX 5006 |
HeatFlow PEX PE-Xc Blue |
ASTM F2788/F2788M |
|||
1/2" - 1" DR 6 | ||||||
16 mm - 25 mm DR 6 | ||||||
1/2" - 1" DR 7.4 | ||||||
16 mm - 25 mm DR 7.4 | ||||||
1/2" - 1" SDR 9 | ||||||
16 mm - 25 mm SDR 9 | ||||||
3/4" - 1" SDR 11 | ||||||
20 mm - 25 mm SDR 11 | ||||||
1" DR 13.6 | ||||||
25 mm DR 13.6 | ||||||
$ These products may also be produced with a blue, clear, or red barrier material on the outer layer of the tubing. * Barrier Pipes only Certified up to 160mm (6"). ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). |
||||||
Pipe$ * ^ +++ |
PEX 5006 |
HeatFlow PEX PE-Xc Red |
ASTM F2788/F2788M |
|||
1/2" - 1" DR 6 | ||||||
16 mm - 25 mm DR 6 | ||||||
1/2" - 1" DR 7.4 | ||||||
16 mm - 25 mm DR 7.4 | ||||||
1/2" - 1" SDR 9 | ||||||
16 mm - 25 mm SDR 9 | ||||||
3/4" - 1" SDR 11 | ||||||
20 mm - 25 mm SDR 11 | ||||||
1" DR 13.6 | ||||||
25 mm DR 13.6 | ||||||
$ These products may also be produced with a blue, clear, or red barrier material on the outer layer of the tubing. * Barrier Pipes only Certified up to 160mm (6"). ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). |
||||||
Pipe$ * ^ +++ |
PEX 5006 |
HeatFlow PEX PE-Xc Natural |
ASTM F2788/F2788M |
|||
1/2" - 1" DR 6 | ||||||
16 mm - 25 mm DR 6 | ||||||
1/2" - 1" DR 7.4 | ||||||
16 mm - 25 mm DR 7.4 | ||||||
1/2" - 1" SDR 9 | ||||||
16 mm - 25 mm SDR 9 | ||||||
3/4" - 1" SDR 11 | ||||||
20 mm - 25 mm SDR 11 | ||||||
1" DR 13.6 | ||||||
25 mm DR 13.6 | ||||||
$ These products may also be produced with a blue, clear, or red barrier material on the outer layer of the tubing. * Barrier Pipes only Certified up to 160mm (6"). ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). |
||||||
Tubing^ ¢ § $$ +++ |
PEX 3106 |
Pexgol PE-Xa Black |
ASTM F876/F877 |
|||
1/2" - 3" SDR 9 | ||||||
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. $$ These products may also be produced with a clear, blue, orange or red barrier material on the outer layer of the tubing. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). |
||||||
Tubing* ^ ¢ § $$ +++ |
PEX 3106 |
Pexgol PE-Xa Black |
ASTM F2788/F2788M |
|||
3" SDR 9 | ||||||
16 mm - 76 mm SDR 9 | ||||||
3" - 14" SDR 6 DR 6 | ||||||
16 mm - 355 mm DR 6 | ||||||
3" - 18" DR 7.4 | ||||||
16 mm - 450 mm DR 7.4 | ||||||
3" - 25" DR 9 | ||||||
16 mm - 630 mm DR 9 | ||||||
3" - 25" DR 11 | ||||||
20 mm - 630 mm DR 11 | ||||||
3" - 25" DR 13.6 | ||||||
25 mm - 630 mm DR 13.6 | ||||||
3" - 25" DR 16.2 | ||||||
32 mm - 630 mm DR 16.2 | ||||||
3" - 25" DR 17 | ||||||
32 mm - 630 mm DR 17 | ||||||
* Barrier Pipes only Certified up to 160mm (6"). ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. $$ These products may also be produced with a clear, blue, orange or red barrier material on the outer layer of the tubing. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). |
||||||
Pipe# ^ ¢ § $$ +++ |
PEX 5006 |
Pexgol PE-Xa Black |
CSA B137.5 |
|||
3/8" - 1" DR 9 | ||||||
# Tubing certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be qualified through testing. Please verify that tubing certified against CSA B137.5 is only marked with the following fitting system designation(s): ASTM F877, ASTM F2080, ASTM F1960. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. $$ These products may also be produced with a clear, blue, orange or red barrier material on the outer layer of the tubing. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). |
||||||
Pipe* ^ ¢ $$ +++ |
PEX 3106 |
Pexgol PE-Xa Natural |
ASTM F2788/F2788M |
|||
1/2" - 14" DR 6 | ||||||
16 mm - 355 mm DR 6 | ||||||
1/2" - 18" DR 7.4 | ||||||
16 mm - 450 mm DR 7.4 | ||||||
1/2" - 25" SDR 9 | ||||||
16 mm - 630 mm SDR 9 | ||||||
3/4" - 25" SDR 11 | ||||||
20 mm - 630 mm SDR 11 | ||||||
1" - 25" DR 13.6 | ||||||
25 mm - 630 mm DR 13.6 | ||||||
1 1/4" - 25" DR 16.2 | ||||||
32 mm - 630 mm DR 16.2 | ||||||
1 1/4" - 25" SDR 17 | ||||||
32 mm - 630 mm SDR 17 | ||||||
* Barrier Pipes only Certified up to 160mm (6"). ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. $$ These products may also be produced with a clear, blue, orange or red barrier material on the outer layer of the tubing. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). |
||||||
Pipe^ ¢ § $$ +++ |
PEX 3106 |
Pexgol PE-Xa Natural |
ASTM F876/F877 |
|||
3/8" - 6" SDR 9 | ||||||
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. $$ These products may also be produced with a clear, blue, orange or red barrier material on the outer layer of the tubing. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). |
||||||
Pipe^ § $$ +++ |
PEX 5106 |
Pexgol PE-Xa Natural |
ASTM F876/F877 |
|||
3/8" - 1" DR 9 | ||||||
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. $$ These products may also be produced with a clear, blue, orange or red barrier material on the outer layer of the tubing. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). |
||||||
Pipe# ^ ¢ § $$ +++ |
PEX 3106 |
Pexgol PE-Xa Natural |
CSA B137.5 |
|||
3/8" - 6" SDR 9 | ||||||
# Tubing certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be qualified through testing. Please verify that tubing certified against CSA B137.5 is only marked with the following fitting system designation(s): ASTM F877, ASTM F2080, ASTM F1960. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. $$ These products may also be produced with a clear, blue, orange or red barrier material on the outer layer of the tubing. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). |
||||||
Pipe# ^ ¢ § $$ +++ |
PEX 5106 |
Pexgol PE-Xa Natural |
CSA B137.5 |
|||
3/8" - 1" DR 9 | ||||||
# Tubing certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be qualified through testing. Please verify that tubing certified against CSA B137.5 is only marked with the following fitting system designation(s): ASTM F877, ASTM F2080, ASTM F1960. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. $$ These products may also be produced with a clear, blue, orange or red barrier material on the outer layer of the tubing. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). |
||||||
Pipe* ^ ¢ $$ +++ |
PEX 3106 |
Sioux Chief PE-Xa Natural |
ASTM F2788/F2788M |
|||
1/2" - 14" DR 6 | ||||||
16 mm - 355 mm DR 6 | ||||||
1/2" - 18" DR 7.4 | ||||||
16 mm - 450 mm DR 7.4 | ||||||
1/2" - 25" SDR 9 | ||||||
16 mm - 630 mm SDR 9 | ||||||
3/4" - 25" SDR 11 | ||||||
20 mm - 630 mm SDR 11 | ||||||
1" - 25" DR 13.6 | ||||||
25 mm - 630 mm DR 13.6 | ||||||
1 1/4" - 25" DR 16.2 | ||||||
32 mm - 630 mm DR 16.2 | ||||||
1 1/4" - 25" SDR 17 | ||||||
32 mm - 630 mm SDR 17 | ||||||
* Barrier Pipes only Certified up to 160mm (6"). ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. $$ These products may also be produced with a clear, blue, orange or red barrier material on the outer layer of the tubing. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). |
||||||
Pipe$ * ^ +++ |
PEX 5006 |
Pexgol PE-Xc Black |
ASTM F2788/F2788M |
|||
1/2" - 1" DR 6 | ||||||
16 mm - 25 mm DR 6 | ||||||
1/2" - 1" DR 7.4 | ||||||
16 mm - 25 mm DR 7.4 | ||||||
1/2" - 1" SDR 9 | ||||||
16 mm - 25 mm SDR 9 | ||||||
3/4" - 1" SDR 11 | ||||||
20 mm - 25 mm SDR 11 | ||||||
1" DR 13.6 | ||||||
25 mm DR 13.6 | ||||||
$ These products may also be produced with a blue, clear, or red barrier material on the outer layer of the tubing. * Barrier Pipes only Certified up to 160mm (6"). ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). |
||||||
Pipe$ * ^ +++ |
PEX 5006 |
Pexgol PE-Xc Blue |
ASTM F2788/F2788M |
|||
1/2" - 1" DR 6 | ||||||
16 mm - 25 mm DR 6 | ||||||
1/2" - 1" DR 7.4 | ||||||
16 mm - 25 mm DR 7.4 | ||||||
1/2" - 1" SDR 9 | ||||||
16 mm - 25 mm SDR 9 | ||||||
3/4" - 1" SDR 11 | ||||||
20 mm - 25 mm SDR 11 | ||||||
1" DR 13.6 | ||||||
25 mm DR 13.6 | ||||||
$ These products may also be produced with a blue, clear, or red barrier material on the outer layer of the tubing. * Barrier Pipes only Certified up to 160mm (6"). ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). |
||||||
Pipe$ * ^ +++ |
PEX 5006 |
Pexgol PE-Xc Red |
ASTM F2788/F2788M |
|||
1/2" - 1" DR 6 | ||||||
16 mm - 25 mm DR 6 | ||||||
1/2" - 1" DR 7.4 | ||||||
16 mm - 25 mm DR 7.4 | ||||||
1/2" - 1" SDR 9 | ||||||
16 mm - 25 mm SDR 9 | ||||||
3/4" - 1" SDR 11 | ||||||
20 mm - 25 mm SDR 11 | ||||||
1" DR 13.6 | ||||||
25 mm DR 13.6 | ||||||
$ These products may also be produced with a blue, clear, or red barrier material on the outer layer of the tubing. * Barrier Pipes only Certified up to 160mm (6"). ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). |
||||||
Pipe$ * ^ +++ |
PEX 5006 |
Pexgol PE-Xc Natural |
ASTM F2788/F2788M |
|||
1/2" - 1" DR 6 | ||||||
16 mm - 25 mm DR 6 | ||||||
1/2" - 1" DR 7.4 | ||||||
16 mm - 25 mm DR 7.4 | ||||||
1/2" - 1" SDR 9 | ||||||
16 mm - 25 mm SDR 9 | ||||||
3/4" - 1" SDR 11 | ||||||
20 mm - 25 mm SDR 11 | ||||||
1" DR 13.6 | ||||||
25 mm DR 13.6 | ||||||
$ These products may also be produced with a blue, clear, or red barrier material on the outer layer of the tubing. * Barrier Pipes only Certified up to 160mm (6"). ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). |
||||||
Pipe* ^ ¢ $$ +++ |
PEX 3106 |
Plumber Friendly PE-Xa Natural |
ASTM F2788/F2788M |
|||
1/2" - 14" DR 6 | ||||||
16 mm - 355 mm DR 6 | ||||||
1/2" - 18" DR 7.4 | ||||||
16 mm - 450 mm DR 7.4 | ||||||
1/2" - 25" SDR 9 | ||||||
16 mm - 630 mm SDR 9 | ||||||
3/4" - 25" SDR 11 | ||||||
20 mm - 630 mm SDR 11 | ||||||
1" - 25" DR 13.6 | ||||||
25 mm - 630 mm DR 13.6 | ||||||
1 1/4" - 25" DR 16.2 | ||||||
32 mm - 630 mm DR 16.2 | ||||||
1 1/4" - 25" SDR 17 | ||||||
32 mm - 630 mm SDR 17 | ||||||
* Barrier Pipes only Certified up to 160mm (6"). ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. $$ These products may also be produced with a clear, blue, orange or red barrier material on the outer layer of the tubing. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). |
||||||
Pipe^ ¢ § $$ +++ |
PEX 3106 |
Plumber Friendly PE-Xa Natural |
ASTM F876/F877 |
|||
3/8" - 6" SDR 9 | ||||||
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. $$ These products may also be produced with a clear, blue, orange or red barrier material on the outer layer of the tubing. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). |
||||||
Pipe^ § $$ +++ |
PEX 5106 |
Plumber Friendly PE-Xa Natural |
ASTM F876/F877 |
|||
3/8" - 1" DR 9 | ||||||
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. $$ These products may also be produced with a clear, blue, orange or red barrier material on the outer layer of the tubing. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). |
||||||
Pipe# ^ ¢ § $$ +++ |
PEX 3106 |
Plumber Friendly PE-Xa Natural |
CSA B137.5 |
|||
3/8" - 6" SDR 9 | ||||||
# Tubing certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be qualified through testing. Please verify that tubing certified against CSA B137.5 is only marked with the following fitting system designation(s): ASTM F877, ASTM F2080, ASTM F1960. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. $$ These products may also be produced with a clear, blue, orange or red barrier material on the outer layer of the tubing. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). |
||||||
Pipe^ ¢ § $$ +++ |
PEX 3106 |
Sioux Chief PE-Xa Natural |
ASTM F876/F877 |
|||
3/8" - 6" SDR 9 | ||||||
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. $$ These products may also be produced with a clear, blue, orange or red barrier material on the outer layer of the tubing. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). |
||||||
Pipe# ^ ¢ § $$ +++ |
PEX 5106 |
Plumber Friendly PE-Xa Natural |
CSA B137.5 |
|||
3/8" - 1" DR 9 | ||||||
# Tubing certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be qualified through testing. Please verify that tubing certified against CSA B137.5 is only marked with the following fitting system designation(s): ASTM F877, ASTM F2080, ASTM F1960. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. $$ These products may also be produced with a clear, blue, orange or red barrier material on the outer layer of the tubing. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). |
||||||
Pipe$ * ^ +++ |
PEX 5006 |
Plumber Friendly PE-Xc Black |
ASTM F2788/F2788M |
|||
1/2" - 1" DR 6 | ||||||
16 mm - 25 mm DR 6 | ||||||
1/2" - 1" DR 7.4 | ||||||
16 mm - 25 mm DR 7.4 | ||||||
1/2" - 1" SDR 9 | ||||||
16 mm - 25 mm SDR 9 | ||||||
3/4" - 1" SDR 11 | ||||||
20 mm - 25 mm SDR 11 | ||||||
1" DR 13.6 | ||||||
25 mm DR 13.6 | ||||||
$ These products may also be produced with a blue, clear, or red barrier material on the outer layer of the tubing. * Barrier Pipes only Certified up to 160mm (6"). ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). |
||||||
Pipe$ * ^ +++ |
PEX 5006 |
Plumber Friendly PE-Xc Blue |
ASTM F2788/F2788M |
|||
1/2" - 1" DR 6 | ||||||
16 mm - 25 mm DR 6 | ||||||
1/2" - 1" DR 7.4 | ||||||
16 mm - 25 mm SDR 7.4 | ||||||
1/2" - 1" SDR 9 | ||||||
16 mm - 25 mm SDR 9 | ||||||
3/4" - 1" SDR 11 | ||||||
20 mm - 25 mm SDR 11 | ||||||
1" DR 13.6 | ||||||
25 mm DR 13.6 | ||||||
$ These products may also be produced with a blue, clear, or red barrier material on the outer layer of the tubing. * Barrier Pipes only Certified up to 160mm (6"). ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). |
||||||
Pipe$ * ^ +++ |
PEX 5006 |
Plumber Friendly PE-Xc Natural |
ASTM F2788/F2788M |
|||
1/2" - 1" DR 6 | ||||||
16 mm - 25 mm DR 6 | ||||||
1/2" - 1" DR 7.4 | ||||||
16 mm - 25 mm DR 7.4 | ||||||
1/2" - 1" DR 9 | ||||||
16 mm - 25 mm SDR 9 | ||||||
3/4" - 1" SDR 11 | ||||||
20 mm - 25 mm SDR 11 | ||||||
1" DR 13.6 | ||||||
25 mm DR 13.6 | ||||||
$ These products may also be produced with a blue, clear, or red barrier material on the outer layer of the tubing. * Barrier Pipes only Certified up to 160mm (6"). ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). |
||||||
Pipe$ * ^ +++ |
PEX 5006 |
Plumber Friendly PE-Xc Red |
ASTM F2788/F2788M |
|||
1/2" - 1" DR 6 | ||||||
16 mm - 25 mm DR 6 | ||||||
1/2" - 1" DR 7.4 | ||||||
16 mm - 25 mm DR 7.4 | ||||||
1/2" - 1" SDR 9 | ||||||
16 mm - 25 mm SDR 9 | ||||||
3/4" - 1" SDR 11 | ||||||
20 mm - 25 mm SDR 11 | ||||||
1" DR 13.6 | ||||||
25 mm SDR 13.6 | ||||||
$ These products may also be produced with a blue, clear, or red barrier material on the outer layer of the tubing. * Barrier Pipes only Certified up to 160mm (6"). ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). |
||||||
Pipe^ ¢ § $$ +++ |
PEX 3106 |
Slant/Fin Heating PE-Xa Natural |
ASTM F876/F877 |
|||
3/8" - 6" SDR 9 | ||||||
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. $$ These products may also be produced with a clear, blue, orange or red barrier material on the outer layer of the tubing. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). |
||||||
Pipe# ^ ¢ § $$ +++ |
PEX 3106 |
Sioux Chief PE-Xa Natural |
CSA B137.5 |
|||
3/8" - 6" SDR 9 | ||||||
# Tubing certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be qualified through testing. Please verify that tubing certified against CSA B137.5 is only marked with the following fitting system designation(s): ASTM F877, ASTM F2080, ASTM F1960. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. $$ These products may also be produced with a clear, blue, orange or red barrier material on the outer layer of the tubing. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). |
||||||
Pipe^ § $$ +++ |
PEX 5106 |
Sioux Chief PE-Xa Natural |
ASTM F876/F877 |
|||
3/8" - 1" DR 9 | ||||||
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. $$ These products may also be produced with a clear, blue, orange or red barrier material on the outer layer of the tubing. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). |
||||||
Pipe# ^ ¢ § $$ +++ |
PEX 5106 |
Sioux Chief PE-Xa Natural |
CSA B137.5 |
|||
3/8" - 1" DR 9 | ||||||
# Tubing certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be qualified through testing. Please verify that tubing certified against CSA B137.5 is only marked with the following fitting system designation(s): ASTM F877, ASTM F2080, ASTM F1960. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. $$ These products may also be produced with a clear, blue, orange or red barrier material on the outer layer of the tubing. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). |
||||||
Pipe^ § $$ +++ |
PEX 5106 |
Slant/FIN Heating PE-Xa Natural |
ASTM F876/F877 |
|||
3/8" - 1" DR 9 | ||||||
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. $$ These products may also be produced with a clear, blue, orange or red barrier material on the outer layer of the tubing. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). |
||||||
Pipe# ^ ¢ § $$ +++ |
PEX 3106 |
Slant/Fin Heating PE-Xa Natural |
CSA B137.5 |
|||
3/8" - 6" SDR 9 | ||||||
# Tubing certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be qualified through testing. Please verify that tubing certified against CSA B137.5 is only marked with the following fitting system designation(s): ASTM F877, ASTM F2080, ASTM F1960. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. $$ These products may also be produced with a clear, blue, orange or red barrier material on the outer layer of the tubing. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). |
||||||
Pipe$ * ^ +++ |
PEX 5006 |
Slant/Fin Heating PE-Xc Black |
ASTM F2788/F2788M |
|||
1/2" - 1" DR 6 | ||||||
16 mm - 25 mm DR 6 | ||||||
1/2" - 1" DR 7.4 | ||||||
16 mm - 25 mm DR 7.4 | ||||||
1/2" - 1" SDR 9 | ||||||
16 mm - 25 mm SDR 9 | ||||||
3/4" - 1" SDR 11 | ||||||
20 mm - 25 mm SDR 11 | ||||||
1" DR 13.6 | ||||||
25 mm DR 13.6 | ||||||
$ These products may also be produced with a blue, clear, or red barrier material on the outer layer of the tubing. * Barrier Pipes only Certified up to 160mm (6"). ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). |
||||||
Pipe$ * ^ +++ |
PEX 5006 |
Slant/Fin Heating PE-Xc Blue |
ASTM F2788/F2788M |
|||
1/2" - 1" DR 6 | ||||||
16 mm - 25 mm DR 6 | ||||||
1/2" - 1" DR 7.4 | ||||||
16 mm - 25 mm DR 7.4 | ||||||
1/2" - 1" SDR 9 | ||||||
16 mm - 25 mm SDR 9 | ||||||
3/4" - 1" Sch 11 | ||||||
20 mm - 25 mm SDR 11 | ||||||
1" DR 13.6 | ||||||
25 mm DR 13.6 | ||||||
$ These products may also be produced with a blue, clear, or red barrier material on the outer layer of the tubing. * Barrier Pipes only Certified up to 160mm (6"). ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). |
||||||
Pipe* ^ ¢ $$ +++ |
PEX 3106 |
Slant/Fin Heating PE-Xa Natural |
ASTM F2788/F2788M |
|||
1/2" - 14" DR 6 | ||||||
16 mm - 355 mm DR 6 | ||||||
1/2" - 18" DR 7.4 | ||||||
16 mm - 450 mm DR 7.4 | ||||||
1/2" - 25" SDR 9 | ||||||
16 mm - 630 mm SDR 9 | ||||||
3/4" - 25" SDR 11 | ||||||
20 mm - 630 mm SDR 11 | ||||||
1" - 25" DR 13.6 | ||||||
25 mm - 630 mm DR 16.2 | ||||||
1 1/4" - 25" DR 16.2 | ||||||
32 mm - 630 mm DR 16.2 | ||||||
1 1/4" - 25" SDR 17 | ||||||
32 mm - 630 mm SDR 17 | ||||||
* Barrier Pipes only Certified up to 160mm (6"). ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. $$ These products may also be produced with a clear, blue, orange or red barrier material on the outer layer of the tubing. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). |
||||||
Pipe$ * ^ +++ |
PEX 5006 |
Slant/Fin Heating PE-Xc Natural |
ASTM F2788/F2788M |
|||
20 mm - 25 mm SDR 11 | ||||||
16 mm - 25 mm DR 6 | ||||||
25 mm DR 13.6 | ||||||
1" DR 13.6 | ||||||
3/4" - 1" SDR 11 | ||||||
16 mm - 25 mm SDR 9 | ||||||
1/2" - 1" SDR 9 | ||||||
16 mm - 25 mm DR 7.4 | ||||||
1/2" - 1" DR 7.4 | ||||||
1/2" - 1" DR 6 | ||||||
$ These products may also be produced with a blue, clear, or red barrier material on the outer layer of the tubing. * Barrier Pipes only Certified up to 160mm (6"). ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). |
||||||
Pipe$ * ^ +++ |
PEX 5006 |
Slant/Fin Heating PE-Xc Red |
ASTM F2788/F2788M |
|||
1/2" - 1" DR 6 | ||||||
16 mm - 25 mm DR 6 | ||||||
1/2" - 1" DR 7.4 | ||||||
16 mm - 25 mm DR 7.4 | ||||||
1/2" - 1" SDR 9 | ||||||
16 mm - 25 mm SDR 9 | ||||||
3/4" - 1" SDR 11 | ||||||
20 mm - 25 mm SDR 11 | ||||||
1" DR 13.6 | ||||||
25 mm DR 13.6 | ||||||
$ These products may also be produced with a blue, clear, or red barrier material on the outer layer of the tubing. * Barrier Pipes only Certified up to 160mm (6"). ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). |
||||||
Pipe^ ¢ § $$ +++ |
PEX 3106 |
Slant/Fin Plumbing PE-Xa Natural |
ASTM F876/F877 |
|||
3/8" - 6" SDR 9 | ||||||
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. $$ These products may also be produced with a clear, blue, orange or red barrier material on the outer layer of the tubing. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). |
||||||
Pipe* ^ ¢ $$ +++ |
PEX 3106 |
Slant/Fin Plumbing PE-Xa Natural |
ASTM F2788/F2788M |
|||
1/2" - 14" DR 6 | ||||||
16 mm - 355 mm DR 6 | ||||||
1/2" - 18" DR 7.4 | ||||||
16 mm - 450 mm DR 7.4 | ||||||
1/2" - 25" SDR 9 | ||||||
16 mm - 630 mm SDR 9 | ||||||
3/4" - 25" SDR 11 | ||||||
20 mm - 630 mm SDR 11 | ||||||
1" - 25" DR 13.6 | ||||||
25 mm - 630 mm DR 13.6 | ||||||
1 1/4" - 25" DR 16.2 | ||||||
32 mm - 630 mm DR 16.2 | ||||||
1 1/4" - 25" SDR 17 | ||||||
32 mm - 630 mm SDR 17 | ||||||
* Barrier Pipes only Certified up to 160mm (6"). ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. $$ These products may also be produced with a clear, blue, orange or red barrier material on the outer layer of the tubing. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). |
||||||
Pipe^ § $$ +++ |
PEX 5106 |
Slant/FIN Plumbing PE-Xa Natural |
ASTM F876/F877 |
|||
3/8" - 1" DR 9 | ||||||
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. $$ These products may also be produced with a clear, blue, orange or red barrier material on the outer layer of the tubing. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). |
||||||
Pipe# ^ ¢ § $$ +++ |
PEX 5106 |
Slant/FIN Plumbing PE-Xa Natural |
CSA B137.5 |
|||
3/8" - 1" DR 9 | ||||||
# Tubing certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be qualified through testing. Please verify that tubing certified against CSA B137.5 is only marked with the following fitting system designation(s): ASTM F877, ASTM F2080, ASTM F1960. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. $$ These products may also be produced with a clear, blue, orange or red barrier material on the outer layer of the tubing. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). |
||||||
Pipe# ^ ¢ § $$ +++ |
PEX 3106 |
Slant/Fin Plumbing PE-Xa Natural |
CSA B137.5 |
|||
3/8" - 6" SDR 9 | ||||||
# Tubing certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be qualified through testing. Please verify that tubing certified against CSA B137.5 is only marked with the following fitting system designation(s): ASTM F877, ASTM F2080, ASTM F1960. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. $$ These products may also be produced with a clear, blue, orange or red barrier material on the outer layer of the tubing. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). |
||||||
Pipe$ * ^ +++ |
PEX 5006 |
Slant/Fin Plumbing PE-Xc Black |
ASTM F2788/F2788M |
|||
1/2" - 1" DR 6 | ||||||
16 mm - 25 mm SIDR 6 | ||||||
1/2" - 1" DR 7.4 | ||||||
16 mm - 25 mm DR 7.4 | ||||||
1/2" - 1" SDR 9 | ||||||
16 mm - 25 mm SDR 9 | ||||||
3/4" - 1" SDR 11 | ||||||
20 mm - 25 mm SDR 11 | ||||||
1" DR 13.6 | ||||||
25 mm DR 13.6 | ||||||
$ These products may also be produced with a blue, clear, or red barrier material on the outer layer of the tubing. * Barrier Pipes only Certified up to 160mm (6"). ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). |
||||||
Pipe$ * ^ +++ |
PEX 5006 |
Slant/Fin Plumbing PE-Xc Blue |
ASTM F2788/F2788M |
|||
1/2" - 1" DR 6 | ||||||
16 mm - 25 mm DR 6 | ||||||
1/2" - 1" DR 7.4 | ||||||
16 mm - 25 mm DR 7.4 | ||||||
1/2" - 1" SDR 9 | ||||||
16 mm - 25 mm SDR 9 | ||||||
3/4" - 1" SDR 11 | ||||||
20 mm - 25 mm SDR 11 | ||||||
1" DR 13.6 | ||||||
25 mm DR 13.6 | ||||||
$ These products may also be produced with a blue, clear, or red barrier material on the outer layer of the tubing. * Barrier Pipes only Certified up to 160mm (6"). ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). |
||||||
Pipe$ * ^ +++ |
PEX 5006 |
Slant/Fin Plumbing PE-Xc Natural |
ASTM F2788/F2788M |
|||
1/2" - 1" DR 6 | ||||||
16 mm - 25 mm DR 6 | ||||||
1/2" - 1" DR 7.4 | ||||||
16 mm - 25 mm DR 7.4 | ||||||
1/2" - 1" SDR 9 | ||||||
16 mm - 25 mm SDR 9 | ||||||
3/4" - 1" SDR 11 | ||||||
20 mm - 25 mm SDR 11 | ||||||
1" DR 13.6 | ||||||
25 mm DR 13.6 | ||||||
$ These products may also be produced with a blue, clear, or red barrier material on the outer layer of the tubing. * Barrier Pipes only Certified up to 160mm (6"). ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). |
||||||
Pipe$ * ^ +++ |
PEX 5006 |
Slant/Fin Plumbing PE-Xc Red |
ASTM F2788/F2788M |
|||
1/2" - 1" DR 6 | ||||||
16 mm - 25 mm DR 6 | ||||||
1/2" - 1" DR 7.4 | ||||||
16 mm - 25 mm DR 7.4 | ||||||
1/2" - 1" SDR 9 | ||||||
16 mm - 25 mm SDR 9 | ||||||
3/4" - 1" SDR 11 | ||||||
20 mm - 25 mm SDR 11 | ||||||
1" DR 13.6 | ||||||
25 mm DR 13.6 | ||||||
$ These products may also be produced with a blue, clear, or red barrier material on the outer layer of the tubing. * Barrier Pipes only Certified up to 160mm (6"). ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). |
||||||
Pipe$ * ^ +++ |
PEX 5006 |
Sioux Chief PE-Xc Black |
ASTM F2788/F2788M |
|||
1/2" - 1" DR 6 | ||||||
16 mm - 25 mm DR 6 | ||||||
1/2" - 1" DR 7.4 | ||||||
16 mm - 25 mm DR 7.4 | ||||||
1/2" - 1" SDR 9 | ||||||
16 mm - 25 mm SDR 9 | ||||||
3/4" - 1" SDR 11 | ||||||
20 mm - 25 mm SDR 11 | ||||||
1" DR 13.6 | ||||||
25 mm DR 13.6 | ||||||
$ These products may also be produced with a blue, clear, or red barrier material on the outer layer of the tubing. * Barrier Pipes only Certified up to 160mm (6"). ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). |
||||||
Pipe^ ¢ § $$ +++ |
PEX 3106 |
Terratherma PE-Xa Natural |
ASTM F876/F877 |
|||
3/8" - 6" SDR 9 | ||||||
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. $$ These products may also be produced with a clear, blue, orange or red barrier material on the outer layer of the tubing. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). |
||||||
Pipe* ^ ¢ $$ +++ |
PEX 3106 |
Terratherma PE-Xa Natural |
ASTM F2788/F2788M |
|||
1/2" - 14" DR 6 | ||||||
16 mm - 355 mm DR 6 | ||||||
1/2" - 18" DR 7.4 | ||||||
16 mm - 450 mm DR 7.4 | ||||||
1/2" - 25" SDR 9 | ||||||
16 mm - 630 mm SDR 9 | ||||||
3/4" - 25" SDR 11 | ||||||
20 mm - 630 mm SDR 11 | ||||||
1" - 25" DR 13.6 | ||||||
25 mm - 630 mm DR 13.6 | ||||||
1 1/4" - 25" DR 16.2 | ||||||
32 mm - 630 mm DR 16.2 | ||||||
1 1/4" - 25" SDR 17 | ||||||
32 mm - 630 mm SDR 17 | ||||||
* Barrier Pipes only Certified up to 160mm (6"). ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. $$ These products may also be produced with a clear, blue, orange or red barrier material on the outer layer of the tubing. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). |
||||||
Pipe^ § $$ +++ |
PEX 5106 |
Terratherma PE-Xa Natural |
ASTM F876/F877 |
|||
3/8" - 1" DR 9 | ||||||
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. $$ These products may also be produced with a clear, blue, orange or red barrier material on the outer layer of the tubing. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). |
||||||
Pipe# ^ ¢ § $$ +++ |
PEX 5106 |
Terratherma PE-Xa Natural |
CSA B137.5 |
|||
3/8" - 1" DR 9 | ||||||
# Tubing certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be qualified through testing. Please verify that tubing certified against CSA B137.5 is only marked with the following fitting system designation(s): ASTM F877, ASTM F2080, ASTM F1960. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. $$ These products may also be produced with a clear, blue, orange or red barrier material on the outer layer of the tubing. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). |
||||||
Pipe# ^ ¢ § $$ +++ |
PEX 3106 |
Terratherma PE-Xa Natural |
CSA B137.5 |
|||
3/8" - 6" SDR 9 | ||||||
# Tubing certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be qualified through testing. Please verify that tubing certified against CSA B137.5 is only marked with the following fitting system designation(s): ASTM F877, ASTM F2080, ASTM F1960. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. $$ These products may also be produced with a clear, blue, orange or red barrier material on the outer layer of the tubing. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). |
||||||
Pipe$ * ^ +++ |
PEX 5006 |
Terratherma PE-Xc Black |
ASTM F2788/F2788M |
|||
1/2" - 1" DR 6 | ||||||
16 mm - 25 mm DR 6 | ||||||
1/2" - 1" DR 7.4 | ||||||
16 mm - 25 mm DR 7.4 | ||||||
1/2" - 1" SDR 9 | ||||||
16 mm - 25 mm SDR 9 | ||||||
3/4" - 1" SDR 11 | ||||||
20 mm - 25 mm SDR 11 | ||||||
1" DR 13.6 | ||||||
25 mm DR 13.6 | ||||||
$ These products may also be produced with a blue, clear, or red barrier material on the outer layer of the tubing. * Barrier Pipes only Certified up to 160mm (6"). ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). |
||||||
Pipe$ * ^ +++ |
PEX 5006 |
Terratherma PE-Xc Blue |
ASTM F2788/F2788M |
|||
1/2" - 1" DR 6 | ||||||
16 mm - 25 mm DR 6 | ||||||
1/2" - 1" DR 7.4 | ||||||
16 mm - 25 mm DR 7.4 | ||||||
1/2" - 1" SDR 9 | ||||||
16 mm - 25 mm SDR 9 | ||||||
3/4" - 1" SDR 11 | ||||||
20 mm - 25 mm SDR 11 | ||||||
1" DR 13.6 | ||||||
25 mm DR 13.6 | ||||||
$ These products may also be produced with a blue, clear, or red barrier material on the outer layer of the tubing. * Barrier Pipes only Certified up to 160mm (6"). ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). |
||||||
Pipe$ * ^ +++ |
PEX 5006 |
Terratherma PE-Xc Natural |
ASTM F2788/F2788M |
|||
1/2" - 1" DR 6 | ||||||
16 mm - 25 mm DR 6 | ||||||
1/2" - 1" DR 7.4 | ||||||
16 mm - 25 mm DR 7.4 | ||||||
1/2" - 1" SDR 9 | ||||||
16 mm - 25 mm SDR 9 | ||||||
3/4" - 1" SDR 11 | ||||||
20 mm - 25 mm SDR 11 | ||||||
1" DR 13.6 | ||||||
25 mm DR 13.6 | ||||||
$ These products may also be produced with a blue, clear, or red barrier material on the outer layer of the tubing. * Barrier Pipes only Certified up to 160mm (6"). ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). |
||||||
Pipe$ * ^ +++ |
PEX 5006 |
Terratherma PE-Xc Red |
ASTM F2788/F2788M |
|||
1/2" - 1" DR 6 | ||||||
16 mm - 25 mm DR 6 | ||||||
1/2" - 1" DR 7.4 | ||||||
16 mm - 25 mm DR 7.4 | ||||||
1/2" - 1" SDR 9 | ||||||
16 mm - 25 mm SDR 9 | ||||||
3/4" - 1" SDR 11 | ||||||
20 mm - 25 mm SDR 11 | ||||||
1" DR 13.6 | ||||||
25 mm DR 13.6 | ||||||
$ These products may also be produced with a blue, clear, or red barrier material on the outer layer of the tubing. * Barrier Pipes only Certified up to 160mm (6"). ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). |
||||||
Pipe$ * ^ +++ |
PEX 5006 |
Sioux Chief PE-Xc Blue |
ASTM F2788/F2788M |
|||
1/2" - 1" DR 6 | ||||||
16 mm - 25 mm DR 6 | ||||||
1/2" - 1" DR 7.4 | ||||||
16 mm - 25 mm DR 7.4 | ||||||
1/2" - 1" SDR 9 | ||||||
16 mm - 25 mm SDR 9 | ||||||
3/4" - 1" SDR 11 | ||||||
20 mm - 25 mm SDR 11 | ||||||
1" DR 13.6 | ||||||
25 mm DR 13.6 | ||||||
$ These products may also be produced with a blue, clear, or red barrier material on the outer layer of the tubing. * Barrier Pipes only Certified up to 160mm (6"). ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). |
||||||
Pipe$ * ^ +++ |
PEX 5006 |
Sioux Chief PE-Xc Natural |
ASTM F2788/F2788M |
|||
1/2" - 1" DR 6 | ||||||
16 mm - 25 mm DR 6 | ||||||
1/2" - 1" DR 7.4 | ||||||
16 mm - 25 mm DR 7.4 | ||||||
1/2" - 1" SDR 9 | ||||||
16 mm - 25 mm SDR 9 | ||||||
3/4" - 1" SDR 11 | ||||||
20 mm - 25 mm SDR 11 | ||||||
1" DR 13.6 | ||||||
25 mm DR 13.6 | ||||||
$ These products may also be produced with a blue, clear, or red barrier material on the outer layer of the tubing. * Barrier Pipes only Certified up to 160mm (6"). ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). |
||||||
Pipe$ * ^ +++ |
PEX 5006 |
Sioux Chief PE-Xc Red |
ASTM F2788/F2788M |
|||
1/2" - 1" DR 6 | ||||||
16 mm - 25 mm DR 6 | ||||||
1/2" - 1" DR 7.4 | ||||||
16 mm - 25 mm DR 7.4 | ||||||
1/2" - 1" SDR 9 | ||||||
16 mm - 25 mm SDR 9 | ||||||
3/4" - 1" SDR 11 | ||||||
20 mm - 25 mm SDR 11 | ||||||
1" DR 13.6 | ||||||
25 mm DR 13.6 | ||||||
$ These products may also be produced with a blue, clear, or red barrier material on the outer layer of the tubing. * Barrier Pipes only Certified up to 160mm (6"). ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). |
Product Type | Material Type | Trade Name | Product Standard | |||
Pipe¢ § $$ |
PEX 3106 |
Sioux Chief PEX PE-Xa Natural |
ASTM F876/F877 |
|||
3/8" - 6" SDR 9 | ||||||
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. $$ These products may also be produced with a clear, blue, orange or red barrier material on the outer layer of the tubing. |
||||||
Pipe# ¢ § $$ |
PEX 3106 |
Sioux Chief PEX PE-Xa Natural |
CSA B137.5 |
|||
3/8" - 6" SDR 9 | ||||||
# Tubing certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be qualified through testing. Please verify that tubing certified against CSA B137.5 is only marked with the following fitting system designation(s): ASTM F877, ASTM F2080, ASTM F1960. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. $$ These products may also be produced with a clear, blue, orange or red barrier material on the outer layer of the tubing. |
||||||
Pipe$ § |
PEX 5006 |
Sioux Chief PEX PE-Xc Natural |
ASTM F876/F877 |
|||
1/4" - 1" SDR 9 | ||||||
$ These products may also be produced with a blue, clear, or red barrier material on the outer layer of the tubing. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
||||||
Pipe$ § |
PEX 5006 |
Sioux Chief PEX PE-Xc Black |
ASTM F876/F877 |
|||
1/4" - 1" SDR 9 | ||||||
$ These products may also be produced with a blue, clear, or red barrier material on the outer layer of the tubing. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
||||||
Pipe$ § |
PEX 5006 |
Sioux Chief PEX PE-Xc Blue |
ASTM F876/F877 |
|||
1/4" - 1" SDR 9 | ||||||
$ These products may also be produced with a blue, clear, or red barrier material on the outer layer of the tubing. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
||||||
Pipe$ § |
PEX 5006 |
Sioux Chief PEX PE-Xc Red |
ASTM F876/F877 |
|||
1/4" - 1" SDR 9 | ||||||
$ These products may also be produced with a blue, clear, or red barrier material on the outer layer of the tubing. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
||||||
Pipe$ § |
PEX 5006 |
Slant/Fin Heating PE-Xc Black |
ASTM F876/F877 |
|||
1/4" - 1" SDR 9 | ||||||
$ These products may also be produced with a blue, clear, or red barrier material on the outer layer of the tubing. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
||||||
Pipe$ § |
PEX 5006 |
Slant/Fin Heating PE-Xc Blue |
ASTM F876/F877 |
|||
1/4" - 1" SDR 9 | ||||||
$ These products may also be produced with a blue, clear, or red barrier material on the outer layer of the tubing. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
||||||
Pipe¢ § $$ |
PEX 3106 |
Slant/Fin Heating PE-Xa Natural |
ASTM F876/F877 |
|||
3/8" - 6" SDR 9 | ||||||
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. $$ These products may also be produced with a clear, blue, orange or red barrier material on the outer layer of the tubing. |
||||||
Pipe# ¢ § $$ |
PEX 3106 |
Slant/Fin Heating PE-Xa Natural |
CSA B137.5 |
|||
3/8" - 6" SDR 9 | ||||||
# Tubing certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be qualified through testing. Please verify that tubing certified against CSA B137.5 is only marked with the following fitting system designation(s): ASTM F877, ASTM F2080, ASTM F1960. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. $$ These products may also be produced with a clear, blue, orange or red barrier material on the outer layer of the tubing. |
||||||
Pipe$ § |
PEX 5006 |
Slant/Fin Heating PE-Xc Natural |
ASTM F876/F877 |
|||
1/4" - 1" SDR 9 | ||||||
$ These products may also be produced with a blue, clear, or red barrier material on the outer layer of the tubing. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
||||||
Pipe$ § |
PEX 5006 |
Slant/Fin Heating PE-Xc Red |
ASTM F876/F877 |
|||
1/4" - 1" SDR 9 | ||||||
$ These products may also be produced with a blue, clear, or red barrier material on the outer layer of the tubing. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
||||||
Pipe¢ § $$ |
PEX 3106 |
Slant/Fin Plumbing PE-Xa Natural |
ASTM F876/F877 |
|||
3/8" - 6" SDR 9 | ||||||
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. $$ These products may also be produced with a clear, blue, orange or red barrier material on the outer layer of the tubing. |
||||||
Pipe# ¢ § $$ |
PEX 3106 |
Slant/Fin Plumbing PE-Xa Natural |
CSA B137.5 |
|||
# Tubing certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be qualified through testing. Please verify that tubing certified against CSA B137.5 is only marked with the following fitting system designation(s): ASTM F877, ASTM F2080, ASTM F1960. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. $$ These products may also be produced with a clear, blue, orange or red barrier material on the outer layer of the tubing. |
||||||
Pipe$ § |
PEX 5006 |
Slant/Fin Plumbing PE-Xc Natural |
ASTM F876/F877 |
|||
1/4" - 1" SDR 9 | ||||||
$ These products may also be produced with a blue, clear, or red barrier material on the outer layer of the tubing. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
||||||
Pipe$ § |
PEX 5006 |
Slant/Fin Plumbing PE-Xc Black |
ASTM F876/F877 |
|||
1/4" - 1" SDR 9 | ||||||
$ These products may also be produced with a blue, clear, or red barrier material on the outer layer of the tubing. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
||||||
Pipe$ § |
PEX 5006 |
Slant/Fin Plumbing PE-Xc Blue |
ASTM F876/F877 |
|||
1/4" - 1" SDR 9 | ||||||
$ These products may also be produced with a blue, clear, or red barrier material on the outer layer of the tubing. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
||||||
Pipe$ § |
PEX 5006 |
Slant/Fin Plumbing PE-Xc Red |
ASTM F876/F877 |
|||
3/8" - 1" SDR 9 | ||||||
$ These products may also be produced with a blue, clear, or red barrier material on the outer layer of the tubing. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
||||||
Pipe¢ § $$ |
PEX 3106 |
Pexgol PE-Xa Natural |
ASTM F876/F877 |
|||
3/8" - 6" SDR 9 | ||||||
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. $$ These products may also be produced with a clear, blue, orange or red barrier material on the outer layer of the tubing. |
||||||
Pipe# ¢ § $$ |
PEX 3106 |
Pexgol PE-Xa Natural |
CSA B137.5 |
|||
3/8" - 6" SDR 9 | ||||||
# Tubing certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be qualified through testing. Please verify that tubing certified against CSA B137.5 is only marked with the following fitting system designation(s): ASTM F877, ASTM F2080, ASTM F1960. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. $$ These products may also be produced with a clear, blue, orange or red barrier material on the outer layer of the tubing. |
||||||
Pipe$ § |
PEX 5006 |
Pexgol PE-Xc Natural |
ASTM F876/F877 |
|||
1/4" - 1" SDR 9 | ||||||
$ These products may also be produced with a blue, clear, or red barrier material on the outer layer of the tubing. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
||||||
Pipe$ § |
PEX 5006 |
Pexgol PE-Xc Black |
ASTM F876/F877 |
|||
1/4" - 1" SDR 9 | ||||||
$ These products may also be produced with a blue, clear, or red barrier material on the outer layer of the tubing. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
||||||
Pipe$ § |
PEX 5006 |
Pexgol PE-Xc Blue |
ASTM F876/F877 |
|||
1/4" - 1" SDR 9 | ||||||
$ These products may also be produced with a blue, clear, or red barrier material on the outer layer of the tubing. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
||||||
Pipe$ § |
PEX 5006 |
Pexgol PE-Xc Red |
ASTM F876/F877 |
|||
1/4" - 1" SDR 9 | ||||||
$ These products may also be produced with a blue, clear, or red barrier material on the outer layer of the tubing. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
||||||
Pipe¢ § $$ |
PEX 3106 |
Terratherma PE-Xa Natural |
ASTM F876/F877 |
|||
3/8" - 6" SDR 9 | ||||||
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. $$ These products may also be produced with a clear, blue, orange or red barrier material on the outer layer of the tubing. |
||||||
Pipe# ¢ § $$ |
PEX 3106 |
Terratherma PE-Xa Natural |
CSA B137.5 |
|||
3/8" - 6" SDR 9 | ||||||
# Tubing certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be qualified through testing. Please verify that tubing certified against CSA B137.5 is only marked with the following fitting system designation(s): ASTM F877, ASTM F2080, ASTM F1960. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. $$ These products may also be produced with a clear, blue, orange or red barrier material on the outer layer of the tubing. |
||||||
Pipe$ § |
PEX 5006 |
Terratherma PE-Xc Natural |
ASTM F876/F877 |
|||
1/4" - 1" SDR 9 | ||||||
$ These products may also be produced with a blue, clear, or red barrier material on the outer layer of the tubing. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
||||||
Pipe$ § |
PEX 5006 |
Terratherma PE-Xc Black |
ASTM F876/F877 |
|||
1/4" - 1" SDR 9 | ||||||
$ These products may also be produced with a blue, clear, or red barrier material on the outer layer of the tubing. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
||||||
Pipe$ § |
PEX 5006 |
Terratherma PE-Xc Blue |
ASTM F876/F877 |
|||
1/4" - 1" SDR 9 | ||||||
$ These products may also be produced with a blue, clear, or red barrier material on the outer layer of the tubing. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
||||||
Pipe$ § |
PEX 5006 |
Terratherma PE-Xc Red |
ASTM F876/F877 |
|||
1/4" - 1" SDR 9 | ||||||
$ These products may also be produced with a blue, clear, or red barrier material on the outer layer of the tubing. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
||||||
Pipe¢ § $$ |
PEX 3106 |
AquaSeal PE-Xa Natural |
ASTM F876/F877 |
|||
3/8" - 6" SDR 9 | ||||||
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. $$ These products may also be produced with a clear, blue, orange or red barrier material on the outer layer of the tubing. |
||||||
Pipe# ¢ § $$ |
PEX 3106 |
AquaSeal PE-Xa Natural |
CSA B137.5 |
|||
3/8" - 6" SDR 9 | ||||||
# Tubing certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be qualified through testing. Please verify that tubing certified against CSA B137.5 is only marked with the following fitting system designation(s): ASTM F877, ASTM F2080, ASTM F1960. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. $$ These products may also be produced with a clear, blue, orange or red barrier material on the outer layer of the tubing. |
||||||
Pipe$ § |
PEX 5006 |
AquaSeal PE-Xc Natural |
ASTM F876/F877 |
|||
1/4" - 1" SDR 9 | ||||||
$ These products may also be produced with a blue, clear, or red barrier material on the outer layer of the tubing. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
||||||
Pipe$ § |
PEX 5006 |
AquaSeal PE-Xc Black |
ASTM F876/F877 |
|||
1/4" - 1" SDR 9 | ||||||
$ These products may also be produced with a blue, clear, or red barrier material on the outer layer of the tubing. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
||||||
Pipe$ § |
PEX 5006 |
AquaSeal PE-Xc Blue |
ASTM F876/F877 |
|||
1/4" - 1" SDR 9 | ||||||
$ These products may also be produced with a blue, clear, or red barrier material on the outer layer of the tubing. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
||||||
Pipe$ § |
PEX 5006 |
AquaSeal PE-Xc Red |
ASTM F876/F877 |
|||
1/4" - 1" SDR 9 | ||||||
$ These products may also be produced with a blue, clear, or red barrier material on the outer layer of the tubing. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
||||||
Pipe¢ § $$ |
PEX 3106 |
AquaHeat PE-Xa Natural |
ASTM F876/F877 |
|||
3/8" - 6" SDR 9 | ||||||
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. $$ These products may also be produced with a clear, blue, orange or red barrier material on the outer layer of the tubing. |
||||||
Pipe# ¢ § $$ |
PEX 3106 |
AquaHeat PE-Xa Natural |
CSA B137.5 |
|||
3/8" - 6" SDR 9 | ||||||
# Tubing certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be qualified through testing. Please verify that tubing certified against CSA B137.5 is only marked with the following fitting system designation(s): ASTM F877, ASTM F2080, ASTM F1960. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. $$ These products may also be produced with a clear, blue, orange or red barrier material on the outer layer of the tubing. |
||||||
Pipe$ § |
PEX 5006 |
AquaHeat PE-Xc Natural |
ASTM F876/F877 |
|||
1/4" - 1" SDR 9 | ||||||
$ These products may also be produced with a blue, clear, or red barrier material on the outer layer of the tubing. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
||||||
Pipe$ § |
PEX 5006 |
AquaHeat PE-Xc Black |
ASTM F876/F877 |
|||
1/4" - 1" SDR 9 | ||||||
$ These products may also be produced with a blue, clear, or red barrier material on the outer layer of the tubing. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
||||||
Pipe$ § |
PEX 5006 |
AquaHeat PE-Xc Blue |
ASTM F876/F877 |
|||
1/4" - 1" SDR 9 | ||||||
$ These products may also be produced with a blue, clear, or red barrier material on the outer layer of the tubing. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
||||||
Pipe$ § |
PEX 5006 |
AquaHeat PE-Xc Red |
ASTM F876/F877 |
|||
1/4" - 1" SDR 9 | ||||||
$ These products may also be produced with a blue, clear, or red barrier material on the outer layer of the tubing. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
||||||
Pipe! & |
PEX 5006 |
PENTAGOL |
ASTM F876/F877 |
|||
1/2", 5/8" SDR 9 | ||||||
! Tubing certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be qualified through testing. Please verify that tubing certified against CSA B137.5 is only marked with the following fitting system designation(s): ASTM F2080, ASTM F1960. & This is a 5 layer construction pipe (PEX-adhesive-EVOH-adhesive-PEX). This product is produced in red, blue, black and natural. |
||||||
Pipe! & ¢ |
PEX 5006 |
PENTAGOL |
CSA B137.5 |
|||
1/2", 5/8" SDR 9 | ||||||
! Tubing certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be qualified through testing. Please verify that tubing certified against CSA B137.5 is only marked with the following fitting system designation(s): ASTM F2080, ASTM F1960. & This is a 5 layer construction pipe (PEX-adhesive-EVOH-adhesive-PEX). This product is produced in red, blue, black and natural. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. |
||||||
Pipe¢ § $$ |
PEX 3106 |
Plumber Friendly PE-Xa Natural |
ASTM F876/F877 |
|||
3/8" - 6" SDR 9 | ||||||
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. $$ These products may also be produced with a clear, blue, orange or red barrier material on the outer layer of the tubing. |
||||||
Pipe# ¢ § $$ |
PEX 3106 |
Plumber Friendly PE-Xa Natural |
CSA B137.5 |
|||
3/8" - 6" SDR 9 | ||||||
# Tubing certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be qualified through testing. Please verify that tubing certified against CSA B137.5 is only marked with the following fitting system designation(s): ASTM F877, ASTM F2080, ASTM F1960. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. $$ These products may also be produced with a clear, blue, orange or red barrier material on the outer layer of the tubing. |
||||||
Pipe$ § |
PEX 5006 |
Plumber Friendly PE-Xc Natural |
ASTM F876/F877 |
|||
1/4" - 1" SDR 9 | ||||||
$ These products may also be produced with a blue, clear, or red barrier material on the outer layer of the tubing. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
||||||
Pipe$ § |
PEX 5006 |
Plumber Friendly PE-Xc Black |
ASTM F876/F877 |
|||
1/4" - 1" SDR 9 | ||||||
$ These products may also be produced with a blue, clear, or red barrier material on the outer layer of the tubing. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
||||||
Pipe$ § |
PEX 5006 |
Plumber Friendly PE-Xc Blue |
ASTM F876/F877 |
|||
1/4" - 1" SDR 9 | ||||||
$ These products may also be produced with a blue, clear, or red barrier material on the outer layer of the tubing. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
||||||
Pipe$ § |
PEX 5006 |
Plumber Friendly PE-Xc Red |
ASTM F876/F877 |
|||
1/4" - 1" SDR 9 | ||||||
$ These products may also be produced with a blue, clear, or red barrier material on the outer layer of the tubing. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
HAB Inc. | |
306 Broadway | |
Providencia, RI 02908 | |
United States | |
508-615-1308 |
Facility : Barcelona, Spain
Product Type | Material Type | Trade Name | Product Standard | |||
Pipe* @ ¢ § +++ [G] |
PEX 5106 |
HAB |
ASTM F876/F877 |
|||
3/8" - 2" | ||||||
* Natural (Solid Wall) PEX Pipe Certified 3/8"" - 2""sizes. Red, blue, white or orange PEX pipe (2 layer pipe - natural with colored adhesive pipe) certified for 3/8"" - 2"" sizes. Tubing certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked, as applicable, with the following fitting system designation(s): ASTM F1960, ASTM F1807, ASTM F2159, and ASTM F2098. @ PEX 5106: Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Pipe* @ ¢ § +++ [G] |
PEX 5106 |
HAB |
CSA B137.5 |
|||
3/8" - 2" | ||||||
* Natural (Solid Wall) PEX Pipe Certified 3/8"" - 2""sizes. Red, blue, white or orange PEX pipe (2 layer pipe - natural with colored adhesive pipe) certified for 3/8"" - 2"" sizes. Tubing certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked, as applicable, with the following fitting system designation(s): ASTM F1960, ASTM F1807, ASTM F2159, and ASTM F2098. @ PEX 5106: Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
Product Type | Material Type | Trade Name | Product Standard | |||
Tubing* @ ¢ § |
PEX 5106 |
HAB |
ASTM F876/F877 |
|||
3/8" - 2" | ||||||
* Monowall pipe (natural); Skinned pipe (red, blue, white and orange); and Barrier pipe (red, blue, white and orange) are certified for the following sizes: 3/8", 1/2", 5/8", 3/4", 1", 1-1/4", 1-1/2" & 2". Tubing certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked, as applicable with the following fitting system designation(s): ASTM F1960, ASTM F1807, ASTM F2159, and ASTM F2098. @ This tubing product has been evaluated against the performance requirements of ASTM F876/877 and CSA B137.5. This product is not NSF Certified for use in a potable water distribution system. This product has been evaluated for use in radiant floor heating, (NSF-rfh), applications only. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
||||||
Tubing* @ ¢ § |
PEX 5106 |
HAB |
CSA B137.5 |
|||
3/8" - 2" | ||||||
* Monowall pipe (natural); Skinned pipe (red, blue, white and orange); and Barrier pipe (red, blue, white and orange) are certified for the following sizes: 3/8", 1/2", 5/8", 3/4", 1", 1-1/4", 1-1/2" & 2". Tubing certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked, as applicable with the following fitting system designation(s): ASTM F1960, ASTM F1807, ASTM F2159, and ASTM F2098. @ This tubing product has been evaluated against the performance requirements of ASTM F876/877 and CSA B137.5. This product is not NSF Certified for use in a potable water distribution system. This product has been evaluated for use in radiant floor heating, (NSF-rfh), applications only. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or documentation shipped with the product are Certified.
HDC Hyundai Engineering Plastics Co., Ltd. | |
1221-32 Daehoman-ro, Seokmum-myeon | |
Dangjin-si, Chungnam 343-856 | |
Korea, Republic of | |
82 41 350 0593 | |
Visit this company's website |
Facility : Chungcheongnam-do, Korea, Republic of
Material Type | End Use | Trade Name | Product Standard |
PEX 5306* ^ ¢ ++ | 1 | Polylink XP650/XC200 (Black) | N/A |
PEX 5106* ^ ¢ ++ | 1 | Polylink XP650/XC200 (Natural) | N/A |
PEX 5306* ^ ¢ ++ | 1 | Polylink XP650/XC200 (Red) | N/A |
PEX 5306* ^ ¢ ++ | 1 | Polylink XP650/XC200 (White) | N/A |
PEX 5306* ^ ¢ ++ | 1 | Polylink XP650/XC200B (Blue) | N/A |
* Tubing manufactured from this material is cure process dependent. Use of this material in NSF Standard 14/61 Certified pipe requires NSF's prior authorization. Tubing produced from this material was evaluated for 1/2" and greater diameters. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. ++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Domestic Hot (140° F). |
HeatLink Group | |
3615 32 Street Northeast | |
Calgary, AB T1Y 5Y9 | |
Canada | |
800-661-5332 | |
403-717-3820 | |
Visit this company's website |
Facility : A Sweden
Product Type | Material Type | Trade Name | Product Standard | |||
Tubing# * |
PEX 0006 |
HeatLink (Natural tubing with O2 barrier) |
ASTM F876/F877 |
|||
3/8", 1/2", 5/8", 3/4", 1", 1 1/4", 1 1/2", 2" SDR 9 | ||||||
# This barrier tubing product has been evaluated against the performance requirements of ASTM F876/F877. This product is not NSF Certified for use in a potable water distribution system. This product has been evaluated for use in radiant floor heating, (NSF-rfh), applications only. * Accepted by NSF for use in residential and commercial construction, including manufactured housing. |
Heatlink Group INC. | |
11500 - Stonehill Drive NE | |
#115 | |
Calgary, AB T3N 2M7 | |
Canada | |
403-717-3820 |
Facility : P3 USA
Product Type | Material Type | Trade Name | Product Standard | |||
Tubing^ § ** |
PEX |
PureLink Plus |
ASTM E84 |
|||
1/2", 3/4" | ||||||
^ Flame Spread Index <= 25, Smoke Developed Index <= 50 § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. ** Flame Spread Index and Smoke Developed Index based on minimum spacing of 18 inches between tubing runs. Tubing shall be marked [NSF®-fs ASTM E84 FS<=25/SD<=50]. |
||||||
Tubing^ § ** |
PEX |
SureLink |
ASTM E84 |
|||
1/2", 3/4" | ||||||
^ Flame Spread Index <= 25, Smoke Developed Index <= 50 § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. ** Flame Spread Index and Smoke Developed Index based on minimum spacing of 18 inches between tubing runs. Tubing shall be marked [NSF®-fs ASTM E84 FS<=25/SD<=50]. |
Product Type | Material Type | Trade Name | Product Standard | |||
Tubing! # * ¢ § ++ [G] |
PEX 5106/5306 |
PureLink Plus |
ASTM F876/F877 |
|||
3/8" - 2" | ||||||
! Certified for blue, natural, red colors, PEX 5106 only. # Certified for Blue and Red adhesive outer layer. * Accepted by NSF for use in residential and commercial construction, including manufactured housing. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. ++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Domestic Hot (140° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Tubing! # * ^ ~ ¢ § ++ [1] [G] |
PEX 5106/5306 |
PureLink Plus |
CSA B137.5 |
|||
3/8" - 2" | ||||||
! Certified for blue, natural, red colors, PEX 5106 only. # Certified for Blue and Red adhesive outer layer. * Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Pipe may have a blue, red or white coating, PEX 5106 only. ~ Pipe may utilize blue, red, or black colored ink on the printline. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. ++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Domestic Hot (140° F). [1] Tubing certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked, as applicable, with the following fitting system designation(s): ASTM F877, ASTM F2159, ASTM F1807, ASTM F1960, ASTM F2098, and ASSE 1061. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Tubing# * ¢ § ++ [G] |
PEX 5306 |
PureLink Plus |
AWWA C904 |
|||
1/2" - 2" SDR 9 | ||||||
# Certified for Blue and Red adhesive outer layer. * Accepted by NSF for use in residential and commercial construction, including manufactured housing. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. ++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Domestic Hot (140° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Tubing* ¢ § +++ [1] [2] [G] |
PEX 5306 |
PurePEX |
ASTM F876/F877 |
|||
3/8" - 1" | ||||||
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [1] Tubing certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked, as applicable, with the following fitting system designation(s): ASTM F877, ASTM F2159, ASTM F1807, ASTM F1960, ASTM F2098, and ASSE 1061. [2] Certified for Red, Blue and White Colors [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Tubing* ¢ § +++ [1] [2] [G] |
PEX 5306 |
PurePEX |
CSA B137.5 |
|||
3/8" - 1" | ||||||
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [1] Tubing certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked, as applicable, with the following fitting system designation(s): ASTM F877, ASTM F2159, ASTM F1807, ASTM F1960, ASTM F2098, and ASSE 1061. [2] Certified for Red, Blue and White Colors [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Tubing* ¢ § +++ [1] [2] [G] |
PEX 5306 |
PurePEX |
AWWA C904 |
|||
3/8" - 1" | ||||||
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [1] Tubing certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked, as applicable, with the following fitting system designation(s): ASTM F877, ASTM F2159, ASTM F1807, ASTM F1960, ASTM F2098, and ASSE 1061. [2] Certified for Red, Blue and White Colors [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Tubing! # * ^ ~ ¢ § ++ [G] |
PEX 5106/5306 |
SureLink |
ASTM F876/F877 |
|||
3/8" - 2" | ||||||
! Certified for blue, natural, red colors, PEX 5106 only. # Certified for Blue and Red adhesive outer layer. * Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Pipe may have a blue, red or white coating, PEX 5106 only. ~ Pipe may utilize blue, red, or black colored ink on the printline. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. ++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Domestic Hot (140° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Tubing! # * ^ ~ ¢ § ++ [1] [G] |
PEX 5106/5306 |
SureLink |
CSA B137.5 |
|||
3/8" - 2" | ||||||
! Certified for blue, natural, red colors, PEX 5106 only. # Certified for Blue and Red adhesive outer layer. * Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Pipe may have a blue, red or white coating, PEX 5106 only. ~ Pipe may utilize blue, red, or black colored ink on the printline. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. ++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Domestic Hot (140° F). [1] Tubing certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked, as applicable, with the following fitting system designation(s): ASTM F877, ASTM F2159, ASTM F1807, ASTM F1960, ASTM F2098, and ASSE 1061. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Tubing# * ¢ § ++ [G] |
PEX 5306 |
SureLink |
AWWA C904 |
|||
1/2" - 2" SDR 9 | ||||||
# Certified for Blue and Red adhesive outer layer. * Accepted by NSF for use in residential and commercial construction, including manufactured housing. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. ++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Domestic Hot (140° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
Facility : Calgary, Alberta, Canada
Product Type | Material Type | Trade Name | Product Standard | |||
Tubing^ § ** |
PEX |
PureLink Plus |
ASTM E84 |
|||
1/2", 3/4" | ||||||
^ Flame Spread Index <= 25, Smoke Developed Index <= 50 § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. ** Flame Spread Index and Smoke Developed Index based on minimum spacing of 18 inches between tubing runs. Tubing shall be marked [NSF®-fs ASTM E84 FS<=25/SD<=50]. |
||||||
Tubing^ § ** |
PEX |
SureLink |
ASTM E84 |
|||
1/2", 3/4" | ||||||
^ Flame Spread Index <= 25, Smoke Developed Index <= 50 § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. ** Flame Spread Index and Smoke Developed Index based on minimum spacing of 18 inches between tubing runs. Tubing shall be marked [NSF®-fs ASTM E84 FS<=25/SD<=50]. |
Product Type | Material Type | Trade Name | Product Standard | |||
Tubing! # * ^ ~ ¢ § ++ [G] |
PEX 5106/5306 |
PureLink Plus |
ASTM F876/F877 |
|||
3/8" - 2" | ||||||
! Certified for blue, natural, red colors, PEX 5106 only. # Certified for Blue and Red adhesive outer layer, PEX 5306 only. * Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Pipe may have a blue, red or white coating, PEX 5106 only. ~ Pipe may utilize blue, red, or black colored ink on the printline. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. ++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Domestic Hot (140° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Tubing! # * ^ ~ ¢ § ++ [1] [G] |
PEX 5106/5306 |
PureLink Plus |
CSA B137.5 |
|||
3/8" - 2" | ||||||
! Certified for blue, natural, red colors, PEX 5106 only. # Certified for Blue and Red adhesive outer layer, PEX 5306 only. * Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Pipe may have a blue, red or white coating, PEX 5106 only. ~ Pipe may utilize blue, red, or black colored ink on the printline. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. ++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Domestic Hot (140° F). [1] Tubing certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked, as applicable, with the following fitting system designation(s): ASTM F877, ASTM F2159, ASTM F1807, ASTM F1960, ASTM F2098, and ASSE 1061. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Tubing# * ~ ¢ § ++ [G] |
PEX 5306 |
PureLink Plus |
AWWA C904 |
|||
1/2" - 2" SDR 9 | ||||||
# Certified for Blue and Red adhesive outer layer, PEX 5306 only. * Accepted by NSF for use in residential and commercial construction, including manufactured housing. ~ Pipe may utilize blue, red, or black colored ink on the printline. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. ++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Domestic Hot (140° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Tubing! # * ^ ~ ¢ § ++ [G] |
PEX 5106/5306 |
SureLink |
ASTM F876/F877 |
|||
3/8" - 2" | ||||||
! Certified for blue, natural, red colors, PEX 5106 only. # Certified for Blue and Red adhesive outer layer, PEX 5306 only. * Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Pipe may have a blue, red or white coating, PEX 5106 only. ~ Pipe may utilize blue, red, or black colored ink on the printline. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. ++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Domestic Hot (140° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Tubing! # * ~ ¢ § ++ [1] [G] |
PEX 5106/5306 |
SureLink |
CSA B137.5 |
|||
3/8" - 2" | ||||||
! Certified for blue, natural, red colors, PEX 5106 only. # Certified for Blue and Red adhesive outer layer, PEX 5306 only. * Accepted by NSF for use in residential and commercial construction, including manufactured housing. ~ Pipe may utilize blue, red, or black colored ink on the printline. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. ++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Domestic Hot (140° F). [1] Tubing certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked, as applicable, with the following fitting system designation(s): ASTM F877, ASTM F2159, ASTM F1807, ASTM F1960, ASTM F2098, and ASSE 1061. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Tubing# * ~ ¢ § ++ [G] |
PEX 5306 |
SureLink |
AWWA C904 |
|||
1/2" - 2" SDR 9 | ||||||
# Certified for Blue and Red adhesive outer layer, PEX 5306 only. * Accepted by NSF for use in residential and commercial construction, including manufactured housing. ~ Pipe may utilize blue, red, or black colored ink on the printline. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. ++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Domestic Hot (140° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
Product Type | Material Type | Trade Name | Product Standard | |||
Tubing¢ |
PEX 5106 |
PureLink Reclaim |
ASTM F876/F877 |
|||
3/8" - 2" | ||||||
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. |
||||||
Tubing¢ [1] |
PEX 5106 |
PureLink Reclaim |
CSA B137.5 |
|||
3/8" - 2" | ||||||
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. [1] Tubing certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked, as applicable, with the following fitting system designation(s): ASTM F877, ASTM F2159, ASTM F1807, ASTM F1960, and ASTM F2098. |
Product Type | Material Type | Trade Name | Product Standard | |||
Tubing* @ ^ ¢ ¥ |
PEX 0306 |
HeatLink |
ASTM F876/F877 |
|||
3/8" - 1 1/2" | ||||||
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. @ This barrier tubing product has been evaluated against the performance requirements of ASTM F876/F877. This product is not NSF Certified for use in a potable water distribution system. This product has been evaluated for use in radiant floor heating (NSF-rfh) applications only. ^ Available in black, orange and red. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. ¥ Product is Certified to the Uniform Mechanical Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Mechanical Code™. |
||||||
Tubing* @ ^ ¢ ¥ |
PEX 5106 |
HeatLink |
ASTM F876/F877 |
|||
3/8" - 1 1/2" | ||||||
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. @ This barrier tubing product has been evaluated against the performance requirements of ASTM F876/F877. This product is not NSF Certified for use in a potable water distribution system. This product has been evaluated for use in radiant floor heating (NSF-rfh) applications only. ^ Available in black, orange and red. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. ¥ Product is Certified to the Uniform Mechanical Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Mechanical Code™. |
||||||
Tubing* @ ^ ¢ ¥ [1] |
PEX |
HeatLink |
CSA B137.5 |
|||
3/8" - 1 1/2" | ||||||
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. @ This barrier tubing product has been evaluated against the performance requirements of ASTM F876/F877. This product is not NSF Certified for use in a potable water distribution system. This product has been evaluated for use in radiant floor heating (NSF-rfh) applications only. ^ Available in black, orange and red. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. ¥ Product is Certified to the Uniform Mechanical Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Mechanical Code™. [1] Tubing certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked, as applicable, with the following fitting system designation(s): ASTM F877, ASTM F2159, ASTM F1807, ASTM F1960, ASTM F2098, and ASSE 1061. |
HeatLink Group Inc. | |
#115, 11500 - Stonehill Drive NE | |
Calgary, AB T3N 2M7 | |
Canada | |
403-250-6433 | |
Visit this company's website |
Facility : Prey Nob District, Cambodia
Product Type | Material Type | Trade Name | Product Standard | ||||
Fittings[1] |
PEX |
REHAU |
ASTM F1960 |
||||
PEX Ring with stop |
|||||||
5/8" EX24219 | 1/2" EX24205 | 3/4" EX24222 | 1" EX24228 | ||||
1-1/4" EX24235 | 1-1/2" EX24241 | 2" EX24250 | |||||
[1] PEX rings are non-wetted components of PEX fitting systems. |
|||||||
Fittings[1] |
PEX |
REHAU |
CSA B137.5 |
||||
PEX Ring with stop |
|||||||
5/8" EX24219 | 1/2" EX24205 | 3/4" EX24222 | 1" EX24228 | ||||
1-1/4" EX24235 | 1-1/2" EX24241 | 2" EX24250 | |||||
[1] PEX rings are non-wetted components of PEX fitting systems. |
Product Type | Material Type | Trade Name | Product Standard | ||||
Fittings[1] |
PEX |
REHAU |
ASTM F1960 |
||||
PEX Ring with stop |
|||||||
5/8" EX24219 | 1/2" EX24205 | 3/4" EX24222 | 1" EX24228 | ||||
1-1/4" EX24235 | 1-1/2" EX24241 | 2" EX24250 | |||||
[1] PEX rings are non-wetted components of PEX fitting systems. |
|||||||
Fittings[1] |
PEX |
REHAU |
CSA B137.5 |
||||
PEX Ring with stop |
|||||||
5/8" EX24219 | 1/2" EX24205 | 3/4" EX24222 | 1" EX24228 | ||||
1-1/4" EX24235 | 1-1/2" EX24241 | 2" EX24250 | |||||
[1] PEX rings are non-wetted components of PEX fitting systems. |
Henco Industries N.V. | |
Toekomstlaan 27 | |
Herentals, B-2200 | |
Belgium | |
+32495571259 | |
Visit this company's website |
Facility : Herentals, Belgium
Product Type | Material Type | Trade Name | Product Standard | |||
Pipe |
PEX / AL / PEX |
Henco Rixc PEXc/AL/PEXc USA |
ASTM F1281 |
|||
1/2" | ||||||
5/8" | ||||||
3/4" | ||||||
7/8" | ||||||
1" |
HongYue Plastic Group Co., Ltd. DBA OnePlus Piping Systems Inc. | |
#81, LongHai Road, Economic & Tech | |
Development Zone, Qinhuangdao City | |
Heibei Province 066004 | |
China | |
86 335 888 6666 | |
Visit this company's website |
Facility : Heibei Province, China
Product Type | Material Type | Trade Name | Product Standard | ||||
Fittings[1] |
PEX |
![]() |
ASTM F1960 |
||||
One Plus PEX Ring |
|||||||
1/2" - 2" | |||||||
[1] PEX rings are non-wetted components of PEX fitting systems. |
|||||||
PEX Ring with Stop[1] |
PEX |
![]() |
ASTM F1960 |
||||
3/8" (ring38) | 5/8" (ring58) | 1/2" (ring12) | 3/4" (ring34) | ||||
1" (ring1) | 1 1/4" (ring114) | 1 1/2" (ring112) | 2" (ring2) | ||||
[1] PEX rings are non-wetted components of PEX fitting systems. |
|||||||
PEX Ring with Stop¢ [1] |
PEX |
![]() |
CSA B137.5 |
||||
1/2" (ring12) | 1" (ring1) | 1 1/4" (ring114) | 1 1/2" (ring112) | ||||
2" (ring2) | 5/8" (ring58) | 3/8" (ring38) | 3/4" (ring34) | ||||
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. [1] PEX rings are non-wetted components of PEX fitting systems. |
|||||||
Pipe! § +++ [G] |
PEX 5306 |
![]() |
ASTM F876/F877 |
||||
1/4" - 2" | |||||||
! Certified for natural,red, white and blue without oxygen barrier. Natural - PEX 5006; Red, white, blue- PEX 5306 § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
|||||||
Tubing! ¢ § +++ [2] [G] |
PEX 5306 |
![]() |
CSA B137.5 |
||||
1/4" - 2" | |||||||
! Certified for natural,red, white and blue without oxygen barrier. Natural - PEX 5006; Red, white, blue- PEX 5306 ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [2] Pipe Certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked with the following fitting system designations: ASTM F1807, ASTM F2159. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
Product Type | Material Type | Trade Name | Product Standard | ||||
Fittings[1] |
PEX |
![]() |
ASTM F1960 |
||||
One Plus PEX Ring |
|||||||
1/2" - 2" | |||||||
[1] PEX rings are non-wetted components of PEX fitting systems. |
|||||||
PEX Ring with Stop[1] |
PEX |
![]() |
ASTM F1960 |
||||
1/2" (ring12) | 3/8" (ring38) | 3/4" (ring34) | 2" (ring2) | ||||
5/8" (ring58) | 1 1/4" (ring114) | 1 1/2" (ring112) | 1" (ring1) | ||||
[1] PEX rings are non-wetted components of PEX fitting systems. |
|||||||
PEX Ring with Stop[1] |
PEX |
![]() |
CSA B137.5 |
||||
1" (ring1) | 1/2" (ring12) | 2" (ring2) | 3/4" (ring34) | ||||
3/8" (ring38) | 5/8" (ring58) | 1 1/2" (ring112) | 1 1/4" (ring114) | ||||
[1] PEX rings are non-wetted components of PEX fitting systems. |
|||||||
Pipe! § +++ [G] |
PEX 5306 |
![]() |
ASTM F876/F877 |
||||
1/4" - 2" | |||||||
! Certified for natural,red, white and blue without oxygen barrier. Natural - PEX 5006; Red, white, blue - PEX 5306. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
|||||||
Tubing! ¢ § +++ [2] [G] |
PEX 5306 |
![]() |
CSA B137.5 |
||||
1/4" - 2" | |||||||
! Certified for natural,red, white and blue without oxygen barrier. Natural - PEX 5006; Red, white, blue - PEX 5306. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [2] Pipe Certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked with the following fitting system designations: ASTM F1807, ASTM F2159. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
Huaru Pipe Inc | |
116 Maple Street | |
Commerce, TX 75428 | |
United States | |
315-418-0770 |
Facility : Commerce, TX
Product Type | Material Type | Trade Name | Product Standard | |||
Tubing[1] [2] |
PEX |
Valtec |
CAN/ULC S102.2 |
|||
1/2" | ||||||
[1] Tubing shall be marked [cNSF®-fs CAN/ULC S102.2 FS<=25/SD<=50]. [2] Flame Spread Value (FSV) <= 25 Smoke Developed Value (SDV) <= 50 |
||||||
Tubing[1] [3] |
PEX |
Valtec |
ASTM E84 |
|||
1/2" | ||||||
[1] Tubing shall be marked [cNSF®-fs CAN/ULC S102.2 FS<=25/SD<=50]. [3] Flame Spread Index <= 25 Smoke Developed Index <=50 |
Product Type | Material Type | Trade Name | Product Standard | |||
Pipe# § +++ [G] |
PEX 5306 |
Valtec |
ASTM F876/F877 |
|||
1/2" - 1" SDR 9 | ||||||
# Tubing is solid wall, Red, White, or Blue. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Pipe# § +++ [G] |
PEX 5306 |
Valtec |
AWWA C904 |
|||
1/2" - 1" SDR 9 | ||||||
# Tubing is solid wall, Red, White, or Blue. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Pipe# % ¢ § +++ [G] |
PEX 5306 |
Valtec |
CSA B137.5 |
|||
1/2" - 1" SDR 9 | ||||||
# Tubing is solid wall, Red, White, or Blue. % Tubing Certified against CSA B137.5 Shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked, as applicable, with the following fitting system designation(s): ASTM F1807, ASTM F2098, ASTM F2159 and ASSE 1061. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
Product Type | Material Type | Trade Name | Product Standard | |||
Pipe# § |
PEX 5306 |
Valtec |
ASTM F876/F877 |
|||
1/2" - 1" SDR 9 | ||||||
# Tubing is solid wall, Red, White, or Blue. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
||||||
Pipe# § |
PEX 5306 |
Valtec |
AWWA C904 |
|||
1/2" - 1" SDR 9 | ||||||
# Tubing is solid wall, Red, White, or Blue. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
||||||
Pipe# % § |
PEX 5306 |
Valtec |
CSA B137.5 |
|||
1/2" - 1" SDR 9 | ||||||
# Tubing is solid wall, Red, White, or Blue. % Tubing Certified against CSA B137.5 Shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked, as applicable, with the following fitting system designation(s): ASTM F1807, ASTM F2098, ASTM F2159 and ASSE 1061. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Infloor Sales & Service | |
503 Gregg Drive | |
Buena Vista, CO 81211 | |
United States | |
800-608-0562 | |
719-395-3400 | |
Visit this company's website |
Facility : Peculiar, MO
Product Type | Material Type | Trade Name | Product Standard | |||
Tubing! % ^ § |
PEX 5006 |
BPEX Tubing Oxygen Barrier |
ASTM F876/F877 |
|||
1/8" - 1" | ||||||
! Product may or may not bear the NSF U.P. code marking. % Certified product is orange or natural in color. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
||||||
Tubing% ^ ¢ |
PEX 5006 |
BPEX Tubing Oxygen Barrier |
CSA B137.5 |
|||
1/8" - 1" | ||||||
% Certified product is orange or natural in color. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. |
IPEX Incorporated | ![]() |
3 Place Du Commerce, Suite 101 | |
Île-Des-Soeurs | |
Verdun, QC H3E 1H7 | |
Canada | |
514-769-2200 | |
Visit this company's website |
Facility : L'Assomption, Québec, Canada
Product Type | Material Type | Trade Name | Product Standard | |||
Pipe^ ¢ § ** +++ [G] |
PEX 5106/5306 |
Blue 904 |
ASTM F876/F877 |
|||
3/4" - 2" SDR 9 | ||||||
^ Meets the Chlorine Resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. ** Certified Blue 904 tubing is blue in color. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Pipe^ ¢ § ** +++ [G] |
PEX 5306 |
Blue 904 |
AWWA C904 |
|||
3/4" - 2" SDR 9 | ||||||
^ Meets the Chlorine Resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. ** Certified Blue 904 tubing is blue in color. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Pipe^ ¢ ** +++ [G] |
PEX |
Blue 904 |
CSA B137.5 |
|||
3/4" - 2" SDR 9 | ||||||
^ Meets the Chlorine Resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. ** Certified Blue 904 tubing is blue in color. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
John L Schultz Ltd. | |
1723 55é Avenue | |
Dorval, QC H9P 2W3 | |
Canada | |
800-363-6240 |
Facility : Guangdong, China
Product Type | Material Type | Trade Name | Product Standard | |||
Tubing# $ * [1] [2] |
PEX |
aqua-dynamic |
ASTM E84 |
|||
3/8", 1/2" - 2" | ||||||
# The Flame Spread Index and Smoke Developed Index for 1/2"-2" tubing are based on when tubing is field insulated with 1/2" JM Microlok HP Hi performance fiberglass insulation as per RIFENG installation instructions. The 3/8" tubing is not insulated. $ Certified for blue, natural, red, and white without oxygen barrier. * Flame Spread Index and Smoke Developed Index based on minimum spacing of 18 inches between tubing runs. Tubing shall be marked [NSF®-fs ASTM E84 FS<=25/SD<=50]. [1] ASTM E84, 1/2'' - 2'' The Flame Spread Index and Smoke Developed Index for 1/2"-2" tubing are based on when tubing is field insulated with 1/2" JM Microlok HP Hi performance fiberglass insulation as per RIFENG installation instructions. The 3/8" tubing is not insulated. [2] Flame Spread Index <= 25 Smoke Developed Index <= 50 |
||||||
Tubing$ & [2] [3] |
PEX |
aqua-dynamic |
CAN/ULC S102.2 |
|||
3/8", 1/2" - 2" | ||||||
$ Certified for blue, natural, red, and white without oxygen barrier. & 3/8" tubing (without insulation) shall be marked [cNSF®-fs ULc S102.2 FS <=25/SD <=50]. 1/2" - 2" tubing (with insulation), Flame Spread Index and Smoke Developed Index based on when the tubing is field insulated with JM Microlok HP Hi Performance Fiberglass insulation as per the pipe manufacturer's installation instructions. Tubing shall be Marked [cNSF®-fs ULc S102.2 FS<=25/SD<=50]. [2] Flame Spread Index <= 25 Smoke Developed Index <= 50 [3] 3/8" Tubing (without insulation) Tubing shall be marked [cNSF®-fs ULc S102.2 FS<=25/SD<=50]. 1/2" through 2" Tubing (with insulation) Flame Spread Rating and Smoke Developed Classification based on when the tubing is field insulated with JM Microlok HP Hi Performance Fiberglass insulation as per the pipe manufacturer's installation instructions. Tubing shall be marked [cNSF®-fs ULc S102.2 FS<=25/SD<=50]. |
||||||
Tubing[4] [5] |
PEX |
aqua-dynamic |
ASTM E84 |
|||
3/8" - 2"[2] | ||||||
[2] Flame Spread Index <= 25 Smoke Developed Index <= 50 [4] Certified for red and white PEX 5106 monowall pipe. [5] The Flame Spread Index and Smoke Developed Index are based on when tubing is field insulated with 1/2" JM Microlok HP Hi performance fiberglass insulation as per RIFENG installation instructions. Flame Spread Index and Smoke Developed Index based on minimum spacing of 18 inches between tubing runs. Tubing shall be marked [NSF®-fs ASTM E84 FS<=25/SD<=50]. |
||||||
Tubing[4] [6] |
PEX |
aqua-dynamic |
CAN/ULC S102.2 |
|||
3/8" - 2"[2] | ||||||
[2] Flame Spread Index <= 25 Smoke Developed Index <= 50 [4] Certified for red and white PEX 5106 monowall pipe. [6] The Flame Spread Index and Smoke Developed Index are based on when the tubing is field insulated with 1/2" JM Microlok HP Hi Performance Fiberglass insulation as per the pipe manufacturer's installation instructions. Tubing shall be Marked [cNSF®-fs ULc S102.2 FS<=25/SD<=50]. |
||||||
Tubing[7] [8] |
PEX |
aqua-dynamic |
ASTM E84 |
|||
3/8" - 1"[2] | ||||||
[2] Flame Spread Index <= 25 Smoke Developed Index <= 50 [7] Certified for blue, red and white PEX 5106 & 5306 2-layer skinned and 4-layer barrier pipe. [8] The Flame Spread Index and Smoke Developed Index are based on when tubing is field insulated with 1/2" JM Microlok HP Hi performance fiberglass insulation as per RIFENG installation instructions (all listed construction/color/size combinations greater than or equal to 3/8" in diameter). Flame Spread Index and Smoke Developed Index based on minimum spacing of 18 inches between tubing runs. Tubing shall be marked [NSF®-fs ASTM E84 FS<=25/SD<=50]. |
||||||
Tubing[7] [9] |
PEX |
aqua-dynamic |
CAN/ULC S102.2 |
|||
3/8" - 1"[2] | ||||||
[2] Flame Spread Index <= 25 Smoke Developed Index <= 50 [7] Certified for blue, red and white PEX 5106 & 5306 2-layer skinned and 4-layer barrier pipe. [9] The Flame Spread Index and Smoke Developed Index are based on when the tubing is field insulated with 1/2" JM Microlok HP Hi Performance Fiberglass insulation as per the pipe manufacturer's installation instructions (all listed construction/color/size combinations greater than or equal to 3/8" in diameter). Tubing shall be Marked [cNSF®-fs ULc S102.2 FS<=25/SD<=50]. |
||||||
Tubing[5] [10] |
PEX |
aqua-dynamic PEX-A |
ASTM E84 |
|||
1/8" - 3"[2] | ||||||
[2] Flame Spread Index <= 25 Smoke Developed Index <= 50 [5] The Flame Spread Index and Smoke Developed Index are based on when tubing is field insulated with 1/2" JM Microlok HP Hi performance fiberglass insulation as per RIFENG installation instructions. Flame Spread Index and Smoke Developed Index based on minimum spacing of 18 inches between tubing runs. Tubing shall be marked [NSF®-fs ASTM E84 FS<=25/SD<=50]. [10] Certified for Natural non-barrier single layer tubing for 1/8 - 3" sizes. Certified for red, white, blue 2-layer tubing for 1/2", 5/8" 3/4", 1" sizes only. |
||||||
Tubing[6] [10] |
PEX |
aqua-dynamic PEX-A |
CAN/ULC S102.2 |
|||
1/8" - 3"[2] | ||||||
[2] Flame Spread Index <= 25 Smoke Developed Index <= 50 [6] The Flame Spread Index and Smoke Developed Index are based on when the tubing is field insulated with 1/2" JM Microlok HP Hi Performance Fiberglass insulation as per the pipe manufacturer's installation instructions. Tubing shall be Marked [cNSF®-fs ULc S102.2 FS<=25/SD<=50]. [10] Certified for Natural non-barrier single layer tubing for 1/8 - 3" sizes. Certified for red, white, blue 2-layer tubing for 1/2", 5/8" 3/4", 1" sizes only. |
||||||
Tubing[5] [11] |
PEX |
aqua-dynamic PEX-A |
ASTM E84 |
|||
1/8" - 3"[2] | ||||||
[2] Flame Spread Index <= 25 Smoke Developed Index <= 50 [5] The Flame Spread Index and Smoke Developed Index are based on when tubing is field insulated with 1/2" JM Microlok HP Hi performance fiberglass insulation as per RIFENG installation instructions. Flame Spread Index and Smoke Developed Index based on minimum spacing of 18 inches between tubing runs. Tubing shall be marked [NSF®-fs ASTM E84 FS<=25/SD<=50]. [11] Certified for Natural non-barrier single layer tubing for 1/8 - 3" sizes. Certified for red, white, blue 2-layer tubing for 1/2", 5/8", 3/4", 1" sizes only. Certified for red, white, blue, orange, natural 3-layer tubing for 1/2", 5/8", 3/4", 1" sizes only. |
||||||
Tubing[6] [11] |
PEX |
aqua-dynamic PEX-A |
CAN/ULC S102.2 |
|||
1/8" - 3"[2] | ||||||
[2] Flame Spread Index <= 25 Smoke Developed Index <= 50 [6] The Flame Spread Index and Smoke Developed Index are based on when the tubing is field insulated with 1/2" JM Microlok HP Hi Performance Fiberglass insulation as per the pipe manufacturer's installation instructions. Tubing shall be Marked [cNSF®-fs ULc S102.2 FS<=25/SD<=50]. [11] Certified for Natural non-barrier single layer tubing for 1/8 - 3" sizes. Certified for red, white, blue 2-layer tubing for 1/2", 5/8", 3/4", 1" sizes only. Certified for red, white, blue, orange, natural 3-layer tubing for 1/2", 5/8", 3/4", 1" sizes only. |
Product Type | Material Type | Trade Name | Product Standard | |||
Tubing$ * ^ ¢ § +++ [5] [G] |
PEX |
aqua-dynamic |
CSA B137.5 |
|||
>= 1/8" SDR 9 | ||||||
$ Certified for natural, without oxygen barrier. * Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [5] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked with the following fitting system designations: ASTM F1807, ASTM F2159, ASTM F1960, F2098. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Tubing! * ^ § +++ [G] |
PEX 5006 |
aqua-dynamic |
CSA B137.5 |
|||
1/8" - 6" SDR 9 | ||||||
! Certified for natural, red, white and blue without oxygen barrier. Natural - 5006 Red, white, blue - 5006, 5106, 5206 * Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Tubing! * ^ § +++ [G] |
PEX 5106 |
aqua-dynamic |
ASTM F876/F877 |
|||
1/8" - 6" SDR 9 | ||||||
! Certified for natural, red, white and blue without oxygen barrier. Natural - 5006 Red, white, blue - 5006, 5106, 5206 * Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Tubing! * ^ § +++ [G] |
PEX 5106 |
aqua-dynamic |
CSA B137.5 |
|||
1/8" - 6" SDR 9 | ||||||
! Certified for natural, red, white and blue without oxygen barrier. Natural - 5006 Red, white, blue - 5006, 5106, 5206 * Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Tubing* ^ ~ ¢ +++ [G] |
PEX 5106[6] |
aqua-dynamic PEX-A |
ASTM F876/F877 |
|||
1/2", 5/8", 3/4", 1" | ||||||
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ~ Certified for Natural non-barrier single layer tubing for 1/8 - 3" sizes. Certified for red, white, blue 2-layer tubing for 1/2", 5/8", 3/4", 1" sizes only. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [6] PEX 5106 Certified for Red, Blue ,White 2-layer for 1/2", 5/8", 3/4", 1" sizes only. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Tubing& * ^ ~ ¢ +++ [5] [G] |
PEX 5006 |
aqua-dynamic PEX-A |
CSA B137.5 |
|||
1/8" - 3" | ||||||
& Meets the chlorine resistance requirements of ASTM F1281 when tested in accordance with ASTM F2023. * Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ~ Certified for Natural non-barrier single layer tubing for 1/8 - 3" sizes. Certified for red, white, blue 2-layer tubing for 1/2", 5/8", 3/4", 1" sizes only. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [5] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked with the following fitting system designations: ASTM F1807, ASTM F2159, ASTM F1960, F2098. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Tubing& * ^ ~ ¢ +++ [5] [G] |
PEX 5106[6] |
aqua-dynamic PEX-A |
CSA B137.5 |
|||
1/2", 5/8", 3/4", 1" | ||||||
& Meets the chlorine resistance requirements of ASTM F1281 when tested in accordance with ASTM F2023. * Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ~ Certified for Natural non-barrier single layer tubing for 1/8 - 3" sizes. Certified for red, white, blue 2-layer tubing for 1/2", 5/8", 3/4", 1" sizes only. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [5] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked with the following fitting system designations: ASTM F1807, ASTM F2159, ASTM F1960, F2098. [6] PEX 5106 Certified for Red, Blue ,White 2-layer for 1/2", 5/8", 3/4", 1" sizes only. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Tubing* ^ ¢ +++ [G] |
PEX 5106[9] |
aqua-dynamic |
ASTM F876/F877 |
|||
3/8" - 1" | ||||||
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [9] Certified for the following: 2-layer skinned (Natural PEX – White PE) pipe [PEX 5106]: 3/8", 1/2", 5/8",3/4" & 1" 2-layer skinned (Natural PEX – Red, White or Blue PE) pipe [PEX 5306]: 3/8", 1/2", 5/8",3/4" & 1" [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Tubing& * ^ ~ ¢ +++ [G] |
PEX 5106[9] |
aqua-dynamic |
CSA B137.5 |
|||
3/8" - 1" | ||||||
& Meets the chlorine resistance requirements of ASTM F1281 when tested in accordance with ASTM F2023. * Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ~ Certified for Natural non-barrier single layer tubing for 1/8 - 3" sizes. Certified for red, white, blue 2-layer tubing for 1/2", 5/8", 3/4", 1" sizes only. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [9] Certified for the following: 2-layer skinned (Natural PEX – White PE) pipe [PEX 5106]: 3/8", 1/2", 5/8",3/4" & 1" 2-layer skinned (Natural PEX – Red, White or Blue PE) pipe [PEX 5306]: 3/8", 1/2", 5/8",3/4" & 1" [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
[4] This product represents the following configurations: Equal Straight Union, PF15c-S, 1/8" - 2 1/2" Equal Elbow, PF15c-L, 1/8" - 2 1/2" Equal Straight Union PF15c(II)-S, 1/8" - 2-1/2" Equal Elbow, PF15c(II)-L, 1/8" - 2-1/2" [7] This is a PEX sleeve certified to ASTM F1960 & CSA B137.5. This is a non wetted product. [8] n - Number of ports. n - 4 - 8 for Branch Tees and n - 3 - 8 for Flow-through Tees.
Product Type | Material Type | Trade Name | Product Standard | |||
Tubing& * ^ ~ ¢ +++ [G] |
PEX 5106[7] [8] |
aqua-dynamic |
CSA B137.5 |
|||
& Meets the chlorine resistance requirements of ASTM F1281 when tested in accordance with ASTM F2023. * Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ~ Certified for Natural non-barrier single layer tubing for 1/8 - 3" sizes. Certified for red, white, blue 2-layer tubing for 1/2", 5/8", 3/4", 1" sizes only. Certified for red, white, blue, orange,natural 3-layer tubing for 1/2", 5/8", 3/4", 1" sizes only. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [7] Certified for red and white PEX 5106 monowall pipe. [8] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer and shall be marked with the following fitting system designations: ASTM F1807, ASTM F2159, ASTM F1960, ASTM F2080, ASTM F2098 and ASSE 1061. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Tubing* ^ ¢ +++ [G] |
PEX 5106[7] |
aqua-dynamic |
ASTM F876/F877 |
|||
>= 1/8" | ||||||
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [7] Certified for red and white PEX 5106 monowall pipe. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Tubing$ * ¢ § [4] |
PEX |
aqua-dynamic |
CSA B137.5 |
|||
>= 1/8" SDR 9 | ||||||
$ Certified for natural, orange, red, and white with oxygen barrier. * Accepted by NSF for use in residential and commercial construction, including manufactured housing. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [4] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked with the following fitting system designations: ASTM F1807, ASTM F2159, ASTM F1960, ASTM F2080, F2098. |
||||||
Tubing$ * § |
PEX 5006 |
aqua-dynamic |
ASTM F876/F877 |
|||
>= 1/8" SDR 9 | ||||||
$ Certified for natural, orange, red, and white with oxygen barrier. * Accepted by NSF for use in residential and commercial construction, including manufactured housing. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
||||||
Tubing! * ^ § |
PEX 5106 |
aqua-dynamic |
ASTM F876/F877 |
|||
1/8" - 6" SDR 9 | ||||||
! Certified for natural, red, white and blue without oxygen barrier. Natural - 5006 Red, white, blue - 5006, 5106, 5206 * Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
||||||
Tubing! * ^ § |
PEX 5106 |
aqua-dynamic |
CSA B137.5 |
|||
1/8" - 6" SDR 9 | ||||||
! Certified for natural, red, white and blue without oxygen barrier. Natural - 5006 Red, white, blue - 5006, 5106, 5206 * Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
||||||
Tubing* ^ ~ ¢ +++ [G] |
PEX 5006 |
aqua-dynamic PEX-A |
ASTM F876/F877 |
|||
1/8" - 3" | ||||||
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ~ Certified for Natural non-barrier single layer tubing for 1/8 - 3" sizes. Certified for red, white, blue 2-layer tubing for 1/2", 5/8", 3/4", 1" sizes only. Certified for red, white, blue, orange,natural 3-layer tubing for 1/2", 5/8", 3/4", 1" sizes only. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Tubing* ^ ~ ¢ +++ [G] |
PEX 5106[5] |
aqua-dynamic PEX-A |
ASTM F876/F877 |
|||
1/2", 5/8", 3/4", 1" | ||||||
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ~ Certified for Natural non-barrier single layer tubing for 1/8 - 3" sizes. Certified for red, white, blue 2-layer tubing for 1/2", 5/8", 3/4", 1" sizes only. Certified for red, white, blue, orange,natural 3-layer tubing for 1/2", 5/8", 3/4", 1" sizes only. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [5] PEX 5106 Certified for Red, Blue ,White 2-layer for 1/2", 5/8", 3/4", 1" sizes only. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Tubing* ^ ~ ¢ +++ [4] [G] |
PEX 5006 |
aqua-dynamic PEX-A |
CSA B137.5 |
|||
1/8" - 3" | ||||||
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ~ Certified for Natural non-barrier single layer tubing for 1/8 - 3" sizes. Certified for red, white, blue 2-layer tubing for 1/2", 5/8", 3/4", 1" sizes only. Certified for red, white, blue, orange,natural 3-layer tubing for 1/2", 5/8", 3/4", 1" sizes only. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [4] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked with the following fitting system designations: ASTM F1807, ASTM F2159, ASTM F1960, ASTM F2080, F2098. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Tubing* ^ ~ ¢ +++ [4] [G] |
PEX 5106[5] |
aqua-dynamic PEX-A |
CSA B137.5 |
|||
1/2", 5/8", 3/4", 1" | ||||||
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ~ Certified for Natural non-barrier single layer tubing for 1/8 - 3" sizes. Certified for red, white, blue 2-layer tubing for 1/2", 5/8", 3/4", 1" sizes only. Certified for red, white, blue, orange,natural 3-layer tubing for 1/2", 5/8", 3/4", 1" sizes only. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [4] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked with the following fitting system designations: ASTM F1807, ASTM F2159, ASTM F1960, ASTM F2080, F2098. [5] PEX 5106 Certified for Red, Blue ,White 2-layer for 1/2", 5/8", 3/4", 1" sizes only. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Tubing* ^ ¢ +++ [G] |
PEX 5106[6] |
aqua-dynamic |
ASTM F876/F877 |
|||
3/8" - 1" | ||||||
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [6] Certified for the following: 2-layer skinned (Natural PEX – White PE) pipe [PEX 5106]: 3/8", 1/2", 5/8", 3/4" & 1" 2-layer skinned (Natural PEX – Red, White or Blue PE) pipe [PEX 5306]: 3/8", 1/2", 5/8", 3/4" & 1" [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Tubing& * ^ ~ ¢ +++ [G] |
PEX 5106[6] |
aqua-dynamic |
CSA B137.5 |
|||
3/8" - 1" | ||||||
& Meets the chlorine resistance requirements of ASTM F1281 when tested in accordance with ASTM F2023. * Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ~ Certified for Natural non-barrier single layer tubing for 1/8 - 3" sizes. Certified for red, white, blue 2-layer tubing for 1/2", 5/8", 3/4", 1" sizes only. Certified for red, white, blue, orange,natural 3-layer tubing for 1/2", 5/8", 3/4", 1" sizes only. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [6] Certified for the following: 2-layer skinned (Natural PEX – White PE) pipe [PEX 5106]: 3/8", 1/2", 5/8", 3/4" & 1" 2-layer skinned (Natural PEX – Red, White or Blue PE) pipe [PEX 5306]: 3/8", 1/2", 5/8", 3/4" & 1" [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
Jones Stephens Corp. | |
3249 Moody Parkway | |
P.O. Box 580 | |
Moody, AL 35004 | |
United States | |
800-355-6637 | |
Visit this company's website |
Facility : Barcelona, Spain
Product Type | Material Type | Trade Name | Product Standard | |||
Pipe* @ ¢ § +++ [G] |
PEX 5106 |
JONES STEPHENS |
ASTM F876/F877 |
|||
3/8" - 2" | ||||||
* Natural (Solid Wall) PEX Pipe Certified 3/8" - 2"sizes. Red, blue, white or orange PEX pipe (2 layer pipe - natural with colored adhesive pipe) certified for 3/8" - 1" sizes. Tubing certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked, as applicable, with the following fitting system designation(s): ASTM F1960, ASTM F1807, ASTM F2159, and ASTM F2098. @ PEX 5106: Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Pipe* @ ¢ § +++ [G] |
PEX 5106 |
JONES STEPHENS |
CSA B137.5 |
|||
3/8" - 2" | ||||||
* Natural (Solid Wall) PEX Pipe Certified 3/8" - 2"sizes. Red, blue, white or orange PEX pipe (2 layer pipe - natural with colored adhesive pipe) certified for 3/8" - 1" sizes. Tubing certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked, as applicable, with the following fitting system designation(s): ASTM F1960, ASTM F1807, ASTM F2159, and ASTM F2098. @ PEX 5106: Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
Product Type | Material Type | Trade Name | Product Standard | |||
Tubing* @ ¢ § |
PEX 5106 |
JONES STEPHENS |
ASTM F876/F877 |
|||
3/8" - 2" | ||||||
* Monowall pipe (natural); Skinned pipe (red, blue, white and orange); and Barrier pipe (red, blue, white and orange) are Certified for the following sizes: 3/8'', 1/2'', 5/8'', 3/4'', 1'', 1-1/2'' & 2''. Tubing Certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked, as applicable with the following fitting system designation(s): ASTM F1960, ASTM F1807, ASTM F2159, and ASTM F2098. @ This tubing product has been evaluated against the performance requirements of ASTM F876/877 and CSA B137.5. This product is not NSF Certified for use in a potable water distribution system. This product has been evaluated for use in radiant floor heating, (NSF-rfh), applications only. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
||||||
Tubing* @ ¢ § |
PEX 5106 |
JONES STEPHENS |
CSA B137.5 |
|||
3/8" - 2" | ||||||
* Monowall pipe (natural); Skinned pipe (red, blue, white and orange); and Barrier pipe (red, blue, white and orange) are Certified for the following sizes: 3/8'', 1/2'', 5/8'', 3/4'', 1'', 1-1/2'' & 2''. Tubing Certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked, as applicable with the following fitting system designation(s): ASTM F1960, ASTM F1807, ASTM F2159, and ASTM F2098. @ This tubing product has been evaluated against the performance requirements of ASTM F876/877 and CSA B137.5. This product is not NSF Certified for use in a potable water distribution system. This product has been evaluated for use in radiant floor heating, (NSF-rfh), applications only. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
Jones Stephens Corp. | |
3249 Moody Pkwy | |
Moody, AL 35004 | |
United States | |
800-355-6637 |
Facility : # 1 USA
Product Type | Material Type | Trade Name | Product Standard | |||
Tubing* ¢ § +++ [1] [2] [G] |
PEX 5306 |
Jones Stephens |
ASTM F876/F877 |
|||
3/8" - 1" | ||||||
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [1] Tubing certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked, as applicable, with the following fitting system designation(s): ASTM F877, ASTM F2159, ASTM F1807, ASTM F1960, ASTM F2098, and ASSE 1061. [2] Certified for Red, Blue and White Colors. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Tubing* ¢ § +++ [1] [2] [G] |
PEX 5306 |
Jones Stephens |
CSA B137.5 |
|||
3/8" - 1" | ||||||
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [1] Tubing certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked, as applicable, with the following fitting system designation(s): ASTM F877, ASTM F2159, ASTM F1807, ASTM F1960, ASTM F2098, and ASSE 1061. [2] Certified for Red, Blue and White Colors. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Tubing* ¢ § +++ [1] [2] [G] |
PEX 5306 |
Jones Stephens |
AWWA C904 |
|||
3/8" - 1" | ||||||
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [1] Tubing certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked, as applicable, with the following fitting system designation(s): ASTM F877, ASTM F2159, ASTM F1807, ASTM F1960, ASTM F2098, and ASSE 1061. [2] Certified for Red, Blue and White Colors. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Tubing! # * ¢ § ++ [G] |
PEX 5106/5306 |
Jones Stephens A |
ASTM F876/F877 |
|||
3/8" - 2" | ||||||
! Certified for blue, natural, red colors, PEX 5106 only. # Certified for Blue and Red adhesive outer layer. * Accepted by NSF for use in residential and commercial construction, including manufactured housing. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. ++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Domestic Hot (140° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Tubing! # * ^ ~ ¢ § ++ [1] [G] |
PEX 5106/5306 |
Jones Stephens A |
CSA B137.5 |
|||
3/8" - 2" | ||||||
! Certified for blue, natural, red colors, PEX 5106 only. # Certified for Blue and Red adhesive outer layer. * Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Pipe may have a blue, red or white coating, PEX 5106 only. ~ Pipe may utilize blue, red, or black colored ink on the printline. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. ++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Domestic Hot (140° F). [1] Tubing certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked, as applicable, with the following fitting system designation(s): ASTM F877, ASTM F2159, ASTM F1807, ASTM F1960, ASTM F2098, and ASSE 1061. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Tubing# * ¢ § ++ [G] |
PEX 5306 |
Jones Stephens A |
AWWA C904 |
|||
1/2" - 2" SDR 9 | ||||||
# Certified for Blue and Red adhesive outer layer. * Accepted by NSF for use in residential and commercial construction, including manufactured housing. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. ++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Domestic Hot (140° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
Facility : # 1 Canada
Product Type | Material Type | Trade Name | Product Standard | |||
Tubing! # * ¢ § ++ [G] |
PEX 5106/5306 |
Jones Stephens A |
ASTM F876/F877 |
|||
3/8" - 2" | ||||||
! Certified for blue, natural, red colors, PEX 5106 only. # Certified for Blue and Red adhesive outer layer. * Accepted by NSF for use in residential and commercial construction, including manufactured housing. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. ++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Domestic Hot (140° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Tubing! # * ^ ~ ¢ § ++ [1] [G] |
PEX 5106/5306 |
Jones Stephens A |
CSA B137.5 |
|||
3/8" - 2" | ||||||
! Certified for blue, natural, red colors, PEX 5106 only. # Certified for Blue and Red adhesive outer layer. * Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Pipe may have a blue, red or white coating, PEX 5106 only. ~ Pipe may utilize blue, red, or black colored ink on the printline. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. ++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Domestic Hot (140° F). [1] Tubing certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked, as applicable, with the following fitting system designation(s): ASTM F877, ASTM F2159, ASTM F1807, ASTM F1960, ASTM F2098, and ASSE 1061. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Tubing# * ¢ § ++ [G] |
PEX 5306 |
Jones Stephens A |
AWWA C904 |
|||
1/2" - 2" SDR 9 | ||||||
# Certified for Blue and Red adhesive outer layer. * Accepted by NSF for use in residential and commercial construction, including manufactured housing. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. ++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Domestic Hot (140° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
K-Flex USA, LLC | ![]() |
100 K-Flex Way | |
Youngsville, NC 27596 | |
United States | |
919-435-5538 | |
Visit this company's website |
Facility : Nuevo Leon, Mexico
Product Type | Material Type | Trade Name | Product Standard | |||
Tubing* ^ ¢ +++ [1] [2] [G] |
PEX 5306 |
K-FLEX PE-Xb Pipe |
ASTM F876/F877 |
|||
1/4" - 2" SDR 9 | ||||||
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [1] Certified for red, white, and blue colors. [2] Tubing certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked, as applicable, with the following fitting system designation(s): ASTM F1807, ASTM F1960, ASTM F2098, and ASTM F2159. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Tubing* ^ ¢ +++ [1] [2] [G] |
PEX 5306 |
K-FLEX PE-Xb Pipe |
CSA B137.5 |
|||
1/4" - 2" SDR 9 | ||||||
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [1] Certified for red, white, and blue colors. [2] Tubing certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked, as applicable, with the following fitting system designation(s): ASTM F1807, ASTM F1960, ASTM F2098, and ASTM F2159. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
Product Type | Material Type | Trade Name | Product Standard | |||
Tubing* ^ ¢ +++ [1] [2] |
PEX 5306 |
K-FLEX PE-Xb Pipe |
ASTM F876/F877 |
|||
1/4" - 2" SDR 9 | ||||||
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [1] Certified for red, white, and blue colors. [2] Tubing certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked, as applicable, with the following fitting system designation(s): ASTM F1807, ASTM F1960, ASTM F2098, and ASTM F2159. |
||||||
Tubing* ^ ¢ +++ [1] [2] |
PEX 5306 |
K-FLEX PE-Xb Pipe |
CSA B137.5 |
|||
1/4" - 2" SDR 9 | ||||||
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [1] Certified for red, white, and blue colors. [2] Tubing certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked, as applicable, with the following fitting system designation(s): ASTM F1807, ASTM F1960, ASTM F2098, and ASTM F2159. |
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Kafrit NA Ltd. | ![]() |
5411 - 275th Street | |
Langley, BC V4W 3X8 | |
Canada | |
604-607-6730 | |
Visit this company's website |
Facility : Langley, British Columbia, Canada
Material Type | End Use | Trade Name | Product Standard |
PEX 5306^ +++ [1] | 1 | TA 1108 HD/TA 2410 CL Red | N/A |
PEX 5306^ +++ [1] | 1 | TA 1108 HD/TA 2411 CL Blue | N/A |
PEX 5306^ +++ [1] | 1 | TA 1108 HD/TA 2412 CL White | N/A |
PEX 5306^ +++ [1] | 1 | TA 1108 HD/TA 2417 CL Black | N/A |
PEX 5306^ +++ [1] | 1 | TA 1108 HD/TA 2418 CL Red | N/A |
PEX 5306^ +++ [1] | 1 | TA 1108 HD/TA 2419 CL White | N/A |
PEX 5306^ +++ [1] | 1 | TA 1108 HD/TA 2420 CL Natural | N/A |
PEX 5306^ +++ [1] | 1 | TA 1108 HD/TA 2421 CL Light Blue | N/A |
PEX 5306^ +++ [1] | 1 | TA 1108 HD/TA 2422 CL Purple | N/A |
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [1] Tubing manufactured using this material is cure process dependent. Use of this material in NSF Certified tubing requires NSF's prior authorization. Tubing produced from this material was tested to the performance requirements of ASTM F876 and CSA B137.5. Tubing produced from this material is being evaluated for 1/4" and greater diameters. |
Legend | |
300 North Opdyke Road | |
Auburn Hills, MI 48326 | |
United States | |
800-752-2082 | |
586-566-7400 |
Facility : D'Opaglio (NO), Italy
Product Type | Material Type | Trade Name | Product Standard | |||
Pipe |
PEX |
LegendFlex |
ASTM F876/F877 |
|||
3/8" - 1" | ||||||
Pipe |
PEX |
LegendFlex |
CSA B137.5 |
|||
3/8" - 1" |
Legend Valve | |
300 North Opdyke Road | |
Auburn Hills, MI 48326 | |
United States | |
248-630-7437 |
Facility : Ulricehamn, Sweden
Product Type | Material Type | Trade Name | Product Standard | |||
Tubing$ * @ |
PEX |
LegendFlex w/Oxygen Barrier |
ASTM F876/F877 |
|||
3/8", 1/2", 5/8", 3/4", 1", 1 1/4", 1 1/2", 2" SDR 9 | ||||||
$ Tubing tested as a system using Georg Fischer S.r.l. brass compression fittings which comply with ASTM F877. * Accepted by NSF for use in residential and commercial construction, including manufactured housing. @ This tubing product has been evaluated against the performance requirements of ASTM F876/877. This product is not NSF Certified for use in a potable water distribution system. This product has been evaluated for use in radiant floor heating, (NSF-rfh), applications only. |
Legend Valve | |
300 North Opdyke Road | |
Auburn Hills, MI 48326 | |
United States | |
248-630-7437 | |
Visit this company's website |
Facility : Barcelona, Spain
Product Type | Material Type | Trade Name | Product Standard | |||
Pipe* @ ¢ § +++ [G] |
PEX 5106 |
LegendFlex |
ASTM F876/F877 |
|||
3/8" - 2" | ||||||
* Natural (Solid Wall) PEX Pipe Certified 3/8" - 2"sizes. Red, blue, white or orange PEX pipe (2 layer pipe - natural with colored adhesive pipe) certified for 3/8" - 1" sizes. Tubing certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked, as applicable, with the following fitting system designation(s): ASTM F1960, ASTM F1807, ASTM F2159, and ASTM F2098. @ PEX 5106: Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Pipe* @ ¢ § +++ [G] |
PEX 5106 |
LegendFlex |
CSA B137.5 |
|||
3/8" - 2" | ||||||
* Natural (Solid Wall) PEX Pipe Certified 3/8" - 2"sizes. Red, blue, white or orange PEX pipe (2 layer pipe - natural with colored adhesive pipe) certified for 3/8" - 1" sizes. Tubing certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked, as applicable, with the following fitting system designation(s): ASTM F1960, ASTM F1807, ASTM F2159, and ASTM F2098. @ PEX 5106: Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or documentation shipped with the product are Certified.
Product Type | Material Type | Trade Name | Product Standard | |||
Pipe* @ ¢ § |
PEX 5106 |
LegendFlex |
ASTM F876/F877 |
|||
3/8" - 2" | ||||||
* Natural (Solid Wall) PEX Pipe Certified 3/8" - 2"sizes. Red, blue, white or orange PEX pipe (2 layer pipe - natural with colored adhesive pipe) certified for 3/8" - 1" sizes. Tubing certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked, as applicable, with the following fitting system designation(s): ASTM F1960, ASTM F1807, ASTM F2159, and ASTM F2098. @ PEX 5106: Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
||||||
Pipe* @ ¢ § |
PEX 5106 |
LegendFlex |
CSA B137.5 |
|||
3/8" - 2" | ||||||
* Natural (Solid Wall) PEX Pipe Certified 3/8" - 2"sizes. Red, blue, white or orange PEX pipe (2 layer pipe - natural with colored adhesive pipe) certified for 3/8" - 1" sizes. Tubing certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked, as applicable, with the following fitting system designation(s): ASTM F1960, ASTM F1807, ASTM F2159, and ASTM F2098. @ PEX 5106: Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or documentation shipped with the product are Certified.
Leggett Supply Inc. DBA Flair-It Sales & Mobile Mart | |
1701 South Cherokee | |
Muskogee, OK 74403 | |
United States | |
918-681-2211 |
Facility : # 1 USA
Product Type | Material Type | Trade Name | Product Standard | |||
Pipe* ^ § +++ [G] |
PEX 1306 |
SafePEX® Pro Blue UV-Shield |
ASTM F876/F877 |
|||
3/8" - 2" SDR 9 | ||||||
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Pipe* ^ ¢ § +++ [G] |
PEX |
SafePEX® Pro Blue UV-Shield |
CSA B137.5 |
|||
3/8" - 2" SDR 9 | ||||||
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Pipe* ^ § +++ [G] |
PEX 1306 |
SafePEX® Pro Red UV-Shield |
ASTM F876/F877 |
|||
3/8" - 2" SDR 9 | ||||||
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Pipe* ^ ¢ § +++ [G] |
PEX |
SafePEX® Pro Red UV-Shield |
CSA B137.5 |
|||
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Pipe* ^ § +++ [G] |
PEX 1306 |
SafePEX® Pro White UV-Shield |
ASTM F876/F877 |
|||
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Pipe* ^ ¢ § +++ [G] |
PEX |
SafePEX® Pro White UV-Shield |
CSA B137.5 |
|||
3/8" - 2" SDR 9 | ||||||
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
$ Non-barrier pipe.
Mercury Plastics LLC | |
15760 Madison Road | |
P.O. Box 989 | |
Middlefield, OH 44062 | |
United States | |
440-632-5281 |
Facility : Middlefield, OH
Product Type | Material Type | Trade Name | Product Standard | |||
Refrigerator Supply Line# ¢ § [1] [G] |
PEX |
GE SmartConnect™ |
ASME A112.18.6/CSA B125.6 |
|||
1/4 in. OD Tube | ||||||
# This product may be marked via a flag type label. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [1] Certified up to 8 feet in length. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Refrigerator Supply Line# ¢ § [2] [G] |
PEX |
Merflex® PEX OT® |
ASME A112.18.6/CSA B125.6 |
|||
1/8" C.T.S. | ||||||
# This product may be marked via a flag type label. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [2] Certified up to 6 feet in length. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Tank Tube/Riser PW# ¢ § [3] [G] |
PEX |
Merflex® PEX OT® |
ASME A112.18.6/CSA B125.6 |
|||
1/4" I.D. | ||||||
# This product may be marked via a flag type label. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [3] Certified up to 20" in length. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Basin Tube/Riser PW# ¢ § [4] [G] |
PEX |
Merflex® PEX OT® |
ASME A112.18.6/CSA B125.6 |
|||
1/4" I.D. | ||||||
# This product may be marked via a flag type label. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [4] Certified up to 96" in length. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Dishwasher Supply Line# ¢ § [5] [G] |
PEX |
Merflex® PEX OT® |
ASME A112.18.6/CSA B125.6 |
|||
1/4" CTS X 3/8" OD | ||||||
# This product may be marked via a flag type label. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [5] Certified up to 72" in length. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Univ Dishwash Supply Line# ¢ § [5] [G] |
PEX |
Merflex® PEX OT® |
ASME A112.18.6/CSA B125.6 |
|||
1/4" CTS X 3/8" OD | ||||||
# This product may be marked via a flag type label. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [5] Certified up to 72" in length. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Basin Tube/Riser PW# § [4] [G] |
PEX |
DURAPEX |
ASME A112.18.6/CSA B125.6 |
|||
1/4" I.D. | ||||||
# This product may be marked via a flag type label. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [4] Certified up to 96" in length. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Basin Tube/Riser# ¢ [4] [6] [G] |
PEX |
Merflex® PEX OT® |
ASME A112.18.6/CSA B125.6 |
|||
1/4" CTS x 3/8" OD - P2-XX-A | ||||||
1/4" CTS x 3/8" OD - P2-XX-B | ||||||
# This product may be marked via a flag type label. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. [4] Certified up to 96" in length. [6] XX indicates length in inches. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Double Ended Hook-Up# ¢ [4] [6] [7] [G] |
PEX |
Merflex® PEX OT® |
ASME A112.18.6/CSA B125.6 |
|||
SEZ-XX-SB | ||||||
SEZ-XX-ST | ||||||
# This product may be marked via a flag type label. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. [4] Certified up to 96" in length. [6] XX indicates length in inches. [7] B indicates basin/lav end. T indicates closet/tank end. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
MEZ Double Ended Hook-Up# ¢ [4] [6] [8] [G] |
PEX |
Merflex® PEX OT® |
ASME A112.18.6/CSA B125.6 |
|||
MEZ-XX-PTW | ||||||
MEZ-XX-PW9W | ||||||
MEZ-XX-PW9W9 | ||||||
MEZ-XX-PWW | ||||||
# This product may be marked via a flag type label. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. [4] Certified up to 96" in length. [6] XX indicates length in inches. [8] W9W denotes one 90-degree bend. W9W9 denotes two 90-degree bends. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Tank Tube/Riser# ¢ [3] [6] [G] |
PEX |
Merflex® PEX OT® |
ASME A112.18.6/CSA B125.6 |
|||
1/4" CTS x 3/8" OD - P2-XX-DL | ||||||
1/4" CTS x 3/8" OD - P2-XX-T | ||||||
# This product may be marked via a flag type label. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. [3] Certified up to 20" in length. [6] XX indicates length in inches. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Refrigerator Supply Line# ¢ § [2] [G] |
PEX |
Zurn®PEX |
ASME A112.18.6/CSA B125.6 |
|||
1/8" C.T.S. | ||||||
# This product may be marked via a flag type label. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [2] Certified up to 6 feet in length. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Tank Tube/Riser PW# ¢ § [3] [G] |
PEX |
Zurn®PEX |
ASME A112.18.6/CSA B125.6 |
|||
1/4" I.D. | ||||||
# This product may be marked via a flag type label. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [3] Certified up to 20" in length. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Basin Tube/Riser PW# ¢ § [4] [G] |
PEX |
Zurn®PEX |
ASME A112.18.6/CSA B125.6 |
|||
1/4" I.D. | ||||||
# This product may be marked via a flag type label. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [4] Certified up to 96" in length. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Dishwasher Supply Line# ¢ § [5] [G] |
PEX |
Zurn®PEX |
ASME A112.18.6/CSA B125.6 |
|||
1/4" CTS x 3/8" OD | ||||||
# This product may be marked via a flag type label. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [5] Certified up to 72" in length. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Basin Tube/Riser# ¢ [4] [6] [G] |
PEX |
Zurn®PEX |
ASME A112.18.6/CSA B125.6 |
|||
1/4" CTS x 3/8" OD - P2-XX-A | ||||||
1/4" CTS x 3/8" OD - P2-XX-B | ||||||
# This product may be marked via a flag type label. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. [4] Certified up to 96" in length. [6] XX indicates length in inches. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Double Ended Hook-Up# ¢ [6] [7] [G] |
PEX |
Zurn®PEX |
ASME A112.18.6/CSA B125.6 |
|||
SEZ-XX-SB[4] | ||||||
SEZ-XX-ST[3] |
||||||
[4] Certified up to 96" in length. [3] Certified up to 20" in length. # This product may be marked via a flag type label. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. [6] XX indicates length in inches. [7] B indicates basin/lav end. T indicates closet/tank end. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
MEZ Double Ended Hook-Up# ¢ [4] [6] [8] [G] |
PEX |
Zurn®PEX |
ASME A112.18.6/CSA B125.6 |
|||
MEZ-XX-PTW | ||||||
MEZ-XX-PW9W | ||||||
MEZ-XX-PW9W9 | ||||||
MEZ-XX-PWW | ||||||
# This product may be marked via a flag type label. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. [4] Certified up to 96" in length. [6] XX indicates length in inches. [8] W9W denotes one 90-degree bend. W9W9 denotes two 90-degree bends. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Tank Tube/Riser# ¢ [3] [6] [G] |
PEX |
Zurn®PEX |
ASME A112.18.6/CSA B125.6 |
|||
1/4" CTS x 3/8" OD - P2-XX-DL | ||||||
1/4" CTS x 3/8" OD - P2-XX-T | ||||||
# This product may be marked via a flag type label. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. [3] Certified up to 20" in length. [6] XX indicates length in inches. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Supply Tube Assembly PW§ [4] [G] |
PEX |
AJ Hookup |
ASME A112.18.6/CSA B125.6 |
|||
1/4" I.D. | ||||||
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [4] Certified up to 96" in length. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Supply Tube Assembly PW§ [4] [G] |
PEX |
DLJ Hookup |
ASME A112.18.6/CSA B125.6 |
|||
1/4" I.D. | ||||||
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [4] Certified up to 96" in length. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Supply Tube Assembly PW§ [G] |
PEX |
MEZ Hookup |
ASME A112.18.6/CSA B125.6 |
|||
1/4"[4] | ||||||
3/8"[9] |
||||||
[4] Certified up to 96" in length. [9] Certified up to 60" in length. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Supply Tube Assembly PW§ [4] [G] |
PEX |
SEZ Hookup |
ASME A112.18.6/CSA B125.6 |
|||
1/4" I.D. | ||||||
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [4] Certified up to 96" in length. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
Product Type | Material Type | Trade Name | Product Standard | |||
Tubing# @ ^ § +++ [G] |
PEX 5106 |
Zurn®PEX |
ASTM F876/F877 |
|||
1/8" - 1 1/4" SDR 9 | ||||||
# Authorized for gray and white. @ Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Tubing# & @ +++ [G] |
PEX 5106 |
Zurn®PEX |
CSA B137.5 |
|||
1/8" - 1 1/4" SDR 9 | ||||||
# Authorized for gray and white. & Tubing certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked, if applicable, with the following fitting system designations: ASTM F1807, ASTM F2159, ASTM F2098, ASTM F2080, ASSE 1061 and ASTM F1960. @ Accepted by NSF for use in residential and commercial construction, including manufactured housing. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Tubing# @ ^ § +++ [G] |
PEX 5106 |
Merflex® PEX OT® |
ASTM F876/F877 |
|||
1/8" - 1 1/4" SDR 9 | ||||||
# Authorized for gray and white. @ Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Tubing@ ^ § +++ [G] |
PEX 5106 |
Merflex® PEX OT® |
ASTM F876/F877 |
|||
1/8" CTS x 1/4" OD SDR 9 | ||||||
@ Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Tubing# & @ ¢ +++ [G] |
PEX 5106 |
Merflex® PEX OT® |
CSA B137.5 |
|||
1/8" - 1 1/4" SDR 9 | ||||||
# Authorized for gray and white. & Tubing certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked, if applicable, with the following fitting system designations: ASTM F1807, ASTM F2159, ASTM F2098, ASTM F2080, ASSE 1061 and ASTM F1960. @ Accepted by NSF for use in residential and commercial construction, including manufactured housing. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Tubing& @ ¢ +++ [G] |
PEX 5106 |
Merflex® PEX OT® |
CSA B137.5 |
|||
1/8" CTS x 1/4" OD SDR 9 | ||||||
& Tubing certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked, if applicable, with the following fitting system designations: ASTM F1807, ASTM F2159, ASTM F2098, ASTM F2080, ASSE 1061 and ASTM F1960. @ Accepted by NSF for use in residential and commercial construction, including manufactured housing. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
Product Type | Material Type | Trade Name | Product Standard | |||
Tubing# * @ ^ ¢ § |
PEX 5006 |
Embassy/LiquiPEX w/O2 Barrier |
ASTM F876/F877 |
|||
3/8" - 1" SDR 9 | ||||||
# Authorized for blue, gray, natural, orange, red, and white. * Product is barrier tubing. @ Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
||||||
Tubing# & * @ ¢ |
PEX 5006 |
Embassy/LiquiPEX w/O2 Barrier |
CSA B137.5 |
|||
3/8" - 1" SDR 9 | ||||||
# Authorized for blue, gray, natural, orange, red, and white. & Tubing certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked, if applicable, with the following fitting system designations: ASTM F1807, ASTM F2159, ASTM F2098, ASTM F2080, ASSE 1061 and ASTM F1960. * Product is barrier tubing. @ Accepted by NSF for use in residential and commercial construction, including manufactured housing. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. |
||||||
Tubing# * @ ^ ¢ § |
PEX 5006 |
Merflex® PEX OT® Oxygen Barrier |
ASTM F876/F877 |
|||
3/8" - 1" SDR 9 | ||||||
# Authorized for blue, gray, natural, orange, red, and white. * Product is barrier tubing. @ Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
||||||
Tubing# & * @ ¢ |
PEX 5006 |
Merflex® PEX OT® Oxygen Barrier |
CSA B137.5 |
|||
3/8" - 1" SDR 9 | ||||||
# Authorized for blue, gray, natural, orange, red, and white. & Tubing certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked, if applicable, with the following fitting system designations: ASTM F1807, ASTM F2159, ASTM F2098, ASTM F2080, ASSE 1061 and ASTM F1960. * Product is barrier tubing. @ Accepted by NSF for use in residential and commercial construction, including manufactured housing. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. |
MrPEX Systems | |
14799 Jackal Street NW | |
Suite 100 | |
Ramsey, MN 55303 | |
United States | |
612 810 0891 |
Facility : Barcelona, Spain
Product Type | Material Type | Trade Name | Product Standard | |||
Pipe* @ ¢ § +++ [G] |
PEX 5106 |
MrPEX |
ASTM F876/F877 |
|||
3/8" - 2" | ||||||
* Natural (Solid Wall) PEX Pipe Certified 3/8" - 2" sizes. Red, blue, white or orange PEX pipe (2 layer pipe - natural with colored adhesive pipe) certified for 3/8" - 2" sizes. Tubing certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked, as applicable, with the following fitting system designation(s): ASTM F1960, ASTM F1807, ASTM F2159, and ASTM F2098. @ PEX 5106: Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Pipe* @ ¢ § +++ [G] |
PEX 5106 |
MrPEX |
CSA B137.5 |
|||
3/8" - 2" | ||||||
* Natural (Solid Wall) PEX Pipe Certified 3/8" - 2" sizes. Red, blue, white or orange PEX pipe (2 layer pipe - natural with colored adhesive pipe) certified for 3/8" - 2" sizes. Tubing certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked, as applicable, with the following fitting system designation(s): ASTM F1960, ASTM F1807, ASTM F2159, and ASTM F2098. @ PEX 5106: Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
Note: Only products bearing the NSF Mark on the product, product packaging, and/or documentation shipped with the product are Certified.
Product Type | Material Type | Trade Name | Product Standard | |||
Tubing* @ ¢ § |
PEX 5106 |
MrPEX |
ASTM F876/F877 |
|||
3/8" - 2" | ||||||
* Monowall pipe (natural); Skinned pipe (red, blue, white and orange); and Barrier pipe (red, blue, white and orange) are certified for the following sizes: 3/8", 1/2", 5/8", 3/4", 1", 1-1/4", 1-1/2" & 2". Tubing certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked, as applicable with the following fitting system designation(s): ASTM F1960, ASTM F1807, ASTM F2159, and ASTM F2098. @ This tubing product has been evaluated against the performance requirements of ASTM F876/877 and CSA B137.5. This product is not NSF Certified for use in a potable water distribution system. This product has been evaluated for use in radiant floor heating, (NSF-rfh), applications only. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
||||||
Tubing* @ ¢ § |
PEX 5106 |
MrPEX |
CSA B137.5 |
|||
3/8" - 2" | ||||||
* Monowall pipe (natural); Skinned pipe (red, blue, white and orange); and Barrier pipe (red, blue, white and orange) are certified for the following sizes: 3/8", 1/2", 5/8", 3/4", 1", 1-1/4", 1-1/2" & 2". Tubing certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked, as applicable with the following fitting system designation(s): ASTM F1960, ASTM F1807, ASTM F2159, and ASTM F2098. @ This tubing product has been evaluated against the performance requirements of ASTM F876/877 and CSA B137.5. This product is not NSF Certified for use in a potable water distribution system. This product has been evaluated for use in radiant floor heating, (NSF-rfh), applications only. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or documentation shipped with the product are Certified.
MrPEX Systems (a division of Safelink Systems, Inc.) | |
14799 Jackal Street NW | |
Suite 100 | |
Ramsey, MN 55303 | |
United States | |
800-716-3406 | |
952-440-7704 |
Facility : Ulricehamn, Sweden
Product Type | Material Type | Trade Name | Product Standard | |||
Tubing§ ** [1] |
PEX |
Mr. PEX (3-layer and 4-layer Tubing) |
ASTM E84 |
|||
1/2", 5/8", 3/4" |
||||||
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. ** Flame Spread Index and Smoke Developed Index based on minimum spacing of 18 inches between tubing runs. Tubing shall be marked [NSF®-fs ASTM E84 FS<=25/SD<=50]. [1] Flame Spread Index <= 25 Smoke Developed Index <= 50 |
Product Type | Material Type | Trade Name | Product Standard | |||
Tubing$ * @ |
PEX |
Mr. PEX (Natural tubing) |
ASTM F876/F877 |
|||
3/8", 1/2", 5/8", 3/4", 1", 1 1/4", 1 1/2", 2" SDR 9 | ||||||
$ Tubing tested as a system using Georg Fischer S.r.l. brass compression fittings which comply with ASTM F877. * Accepted by NSF for use in residential and commercial construction, including manufactured housing. @ This tubing product has been evaluated against the performance requirements of ASTM F876/877. This product is not NSF Certified for use in a potable water distribution system. This product has been evaluated for use in radiant floor heating, (NSF-rfh), applications only. |
||||||
Tubing# $ * |
PEX |
Mr. PEX (Red tubing with O2 barrier) |
ASTM F876/F877 |
|||
3/8", 1/2", 5/8", 3/4", 1", 1 1/4", 1 1/2", 2" SDR 9 | ||||||
# This barrier tubing product has been evaluated against the performance requirements of ASTM F876/F877. This product is not NSF Certified for use in a potable water distribution system. This product has been evaluated for use in radiant floor heating, (NSF-rfh), applications only. $ Tubing tested as a system using Georg Fischer S.r.l. brass compression fittings which comply with ASTM F877. * Accepted by NSF for use in residential and commercial construction, including manufactured housing. |
||||||
Tubing# $ * |
PEX |
Mr. PEX (Natural tubing with O2 barrier) |
ASTM F876/F877 |
|||
3/8", 1/2", 5/8", 3/4", 1", 1 1/4", 1 1/2", 2" SDR 9 | ||||||
# This barrier tubing product has been evaluated against the performance requirements of ASTM F876/F877. This product is not NSF Certified for use in a potable water distribution system. This product has been evaluated for use in radiant floor heating, (NSF-rfh), applications only. $ Tubing tested as a system using Georg Fischer S.r.l. brass compression fittings which comply with ASTM F877. * Accepted by NSF for use in residential and commercial construction, including manufactured housing. |
OnePlus New Material Technology Co., Ltd. | |
Pou Thoeung Village, Bet Trang Commune | |
& Smach Deng Village, Ream Commune | |
Prey Nob District, Sihanoukville Province | |
Cambodia | |
855 87 1357 3159 |
Facility : Prey Nob District, Cambodia
Product Type | Material Type | Trade Name | Product Standard | |||
Pipe! § +++ [G] |
PEX 5306 |
One Plus PEX |
ASTM F876/F877 |
|||
1/4" - 2" | ||||||
! Certified for natural, red, white and blue without oxygen barrier. Natural-PEX 5006; red, white, blue- PEX 5306 § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Tubing! ¢ § +++ [1] [G] |
PEX 5306 |
One Plus PEX |
CSA B137.5 |
|||
1/4" - 2" | ||||||
! Certified for natural, red, white and blue without oxygen barrier. Natural-PEX 5006; red, white, blue- PEX 5306 ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [1] Pipe Certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked with the following fitting system designations: ASTM F1807, ASTM F2159. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Fittings[2] |
PEX |
One Plus PEX |
ASTM F1960 |
|||
One Plus PEX Ring with stop |
||||||
3/8" - 3" | ||||||
[2] PEX rings are non-wetted components of PEX fitting systems. |
||||||
Fittings[2] |
PEX |
One Plus PEX |
CSA B137.5 |
|||
One Plus PEX Ring with stop |
||||||
3/8" - 3" | ||||||
[2] PEX rings are non-wetted components of PEX fitting systems. |
Product Type | Material Type | Trade Name | Product Standard | |||
Pipe! § +++ [G] |
PEX 5306 |
One Plus PEX |
ASTM F876/F877 |
|||
1/4" - 2" | ||||||
! Certified for natural, red, white and blue without oxygen barrier. Natural-PEX 5006; red, white, blue- PEX 5306 § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Tubing! ¢ § +++ [1] [G] |
PEX 5306 |
One Plus PEX |
CSA B137.5 |
|||
1/4" - 2" | ||||||
! Certified for natural, red, white and blue without oxygen barrier. Natural-PEX 5006; red, white, blue- PEX 5306 ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [1] Pipe Certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked with the following fitting system designations: ASTM F1807, ASTM F2159. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Fittings[2] |
PEX |
One Plus PEX |
ASTM F1960 |
|||
One Plus PEX Ring with stop |
||||||
3/8" - 3" | ||||||
[2] PEX rings are non-wetted components of PEX fitting systems. |
||||||
Fittings[2] |
PEX |
One Plus PEX |
CSA B137.5 |
|||
One Plus PEX Ring with stop |
||||||
3/8" - 3" | ||||||
[2] PEX rings are non-wetted components of PEX fitting systems. |
||||||
Pipe! § +++ [G] |
PEX 5306 |
One Plus PEX |
ASTM F876/877 |
|||
3/8" - 2" | ||||||
! Certified for natural, red, white and blue without oxygen barrier. Natural-PEX 5006; red, white, blue- PEX 5306 § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Tubing! ¢ § +++ [1] [G] |
PEX 5306 |
One Plus PEX |
CSA B137.5 |
|||
3/8" - 2" | ||||||
! Certified for natural, red, white and blue without oxygen barrier. Natural-PEX 5006; red, white, blue- PEX 5306 ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [1] Pipe Certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked with the following fitting system designations: ASTM F1807, ASTM F2159. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Pipe§ +++ [3] [G] |
PEX 5306 |
One Plus PEX |
ASTM F876/877 |
|||
1/2", 5/8", 3/4",1" | ||||||
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [3] Certified for natural, red, white and blue for 2-layer barrier tubing . Natural-PEX 5006; red, white, blue- PEX 5306 [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Tubing¢ § +++ [1] [3] [G] |
PEX 5306 |
One Plus PEX |
CSA B137.5 |
|||
1/2", 5/8", 3/4",1" | ||||||
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [1] Pipe Certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked with the following fitting system designations: ASTM F1807, ASTM F2159. [3] Certified for natural, red, white and blue for 2-layer barrier tubing . Natural-PEX 5006; red, white, blue- PEX 5306 [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Pipe§ +++ [4] [G] |
PEX 5006 |
One Plus PEX |
ASTM F876/877 |
|||
1/2", 5/8", 3/4",1" | ||||||
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [4] Certified for Natural, Red, White, Blue, Orange, Black for 2-layer barrier tubing . Natural, Red, White Blue, Orange, Black-PEX 5006 [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Tubing¢ § +++ [1] [4] [G] |
PEX 5006 |
One Plus PEX |
CSA B137.5 |
|||
1/2", 5/8", 3/4",1" | ||||||
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [1] Pipe Certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked with the following fitting system designations: ASTM F1807, ASTM F2159. [4] Certified for Natural, Red, White, Blue, Orange, Black for 2-layer barrier tubing . Natural, Red, White Blue, Orange, Black-PEX 5006 [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Pipe§ +++ [5] [G] |
PEX 5006 |
One Plus PEX |
ASTM F876/877 |
|||
1/2", 5/8", 3/4",1" | ||||||
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [5] Certified for Natural, Red, White, Blue, Orange, Black for 3-layer barrier tubing. Natural, Red, White Blue, Orange, Black-PEX 5006 [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Tubing¢ § +++ [1] [5] [G] |
PEX 5006 |
One Plus PEX |
CSA B137.5 |
|||
1/2", 5/8", 3/4",1" | ||||||
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [1] Pipe Certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked with the following fitting system designations: ASTM F1807, ASTM F2159. [5] Certified for Natural, Red, White, Blue, Orange, Black for 3-layer barrier tubing. Natural, Red, White Blue, Orange, Black-PEX 5006 [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
PEX GUY | |
14710 Yorba Court | |
Chino, CA 91710 | |
United States | |
877-235-6352 | |
909-606-0988 |
Facility : # 1 China
Product Type | Material Type | Trade Name | Product Standard | |||
Tubing$ * ^ § +++ |
PEX 5006 |
PEX GUY |
ASTM F876/F877 |
|||
3/8" - 1 1/4" SDR 9 | ||||||
$ Certified for blue, natural, red, and white without oxygen barrier. * Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). |
||||||
Tubing$ * ¢ § +++ |
PEX |
PEX GUY |
CSA B137.5 |
|||
3/8" - 1" SDR 9 | ||||||
$ Certified for blue, natural, red, and white without oxygen barrier. * Accepted by NSF for use in residential and commercial construction, including manufactured housing. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). |
||||||
Tubing& * ^ ~ ¢ +++ [G] |
PEX 5106[1] |
PEX GUY |
CSA B137.5 |
|||
>= 1/8" | ||||||
& Meets the chlorine resistance requirements of ASTM F1281 when tested in accordance with ASTM F2023. * Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ~ Certified for Natural non-barrier single layer tubing for 1/8 - 3" sizes. Certified for red, white, blue 2-layer tubing for 1/2", 5/8", 3/4", 1" sizes only. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [1] Certified for red and white PEX 5106 monowall pipe. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Tubing* ^ ~ ¢ +++ [G] |
PEX 5106[1] |
PEX GUY |
ASTM F876/F877 |
|||
>= 1/8" | ||||||
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ~ Certified for Natural non-barrier single layer tubing for 1/8 - 3" sizes. Certified for red, white, blue 2-layer tubing for 1/2", 5/8", 3/4", 1" sizes only. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [1] Certified for red and white PEX 5106 monowall pipe. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Tubing! * ^ § +++ [G] |
PEX 5106 |
PEX GUY |
ASTM F876/F877 |
|||
1/8" - 6" SDR 9 | ||||||
! Certified for natural, red, white and blue without oxygen barrier. Natural - 5006 Red, white, blue - 5006, 5106, 5206 * Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Tubing! * ^ § +++ [G] |
PEX 5106 |
PEX GUY |
CSA B137.5 |
|||
1/8" - 6" SDR 9 | ||||||
! Certified for natural, red, white and blue without oxygen barrier. Natural - 5006 Red, white, blue - 5006, 5106, 5206 * Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
Product Type | Material Type | Trade Name | Product Standard | |||
Tubing$ * § |
PEX 5006 |
PEX GUY |
ASTM F876/F877 |
|||
3/8" - 1 1/4" SDR 9 | ||||||
$ Certified for red, and white with oxygen barrier. * Accepted by NSF for use in residential and commercial construction, including manufactured housing. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
||||||
Tubing$ * ¢ § |
PEX |
PEX GUY |
CSA B137.5 |
|||
3/8" - 1" SDR 9 | ||||||
$ Certified for red, and white with oxygen barrier. * Accepted by NSF for use in residential and commercial construction, including manufactured housing. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
||||||
Tubing* ^ ~ ¢ +++ [G] |
PEX 5006 |
PEX GUY |
ASTM F876/F877 |
|||
1/8" - 3" | ||||||
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ~ Certified for Natural non-barrier single layer tubing for 1/8 - 3" sizes. Certified for red, white, blue 2-layer tubing for 1/2", 5/8", 3/4", 1" sizes only. Certified for red, white, blue, orange, natural 3-layer tubing for 1/2", 5/8", 3/4", 1" sizes only. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Tubing* ^ ~ ¢ +++ [1] [G] |
PEX 5006 |
PEX GUY |
CSA B137.5 |
|||
1/8" - 3" | ||||||
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ~ Certified for Natural non-barrier single layer tubing for 1/8 - 3" sizes. Certified for red, white, blue 2-layer tubing for 1/2", 5/8", 3/4", 1" sizes only. Certified for red, white, blue, orange, natural 3-layer tubing for 1/2", 5/8", 3/4", 1" sizes only. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [1] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked with the following fitting system designations: ASTM F1807, ASTM F2159, ASTM F1960, F2098. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Tubing$ * § |
PEX 5006 |
PEX GUY |
ASTM F876/F877 |
|||
>= 1/8" SDR 9 | ||||||
$ Certified for red, and white with oxygen barrier. * Accepted by NSF for use in residential and commercial construction, including manufactured housing. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
PEX GUY | |
14710 Yorba Court | |
Chino, CA 91710 | |
United States | |
877-235-6352 | |
Visit this company's website |
Facility : # 1 European Union
Product Type | Material Type | Trade Name | Product Standard | |||
Pipe* @ ¢ § +++ [G] |
PEX 5106 |
ALPHA PEX GUY |
ASTM F876/F877 |
|||
3/8" - 2" | ||||||
* Natural (Solid Wall) PEX Pipe Certified 3/8" - 2"sizes. Red, blue, white or orange PEX pipe (2 layer pipe - natural with colored adhesive pipe) certified for 3/8" - 1" sizes. Tubing certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked, as applicable, with the following fitting system designation(s): ASTM F1960, ASTM F1807, ASTM F2159, and ASTM F2098. @ PEX 5106: Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Pipe* @ ¢ § +++ [G] |
PEX 5106 |
ALPHA PEX GUY |
CSA B137.5 |
|||
3/8" - 2" | ||||||
* Natural (Solid Wall) PEX Pipe Certified 3/8" - 2"sizes. Red, blue, white or orange PEX pipe (2 layer pipe - natural with colored adhesive pipe) certified for 3/8" - 1" sizes. Tubing certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked, as applicable, with the following fitting system designation(s): ASTM F1960, ASTM F1807, ASTM F2159, and ASTM F2098. @ PEX 5106: Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or documentation shipped with the product are Certified.
Product Type | Material Type | Trade Name | Product Standard | |||
Tubing* @ ¢ § |
PEX 5106 |
ALPHA PEX GUY |
ASTM F876/F877 |
|||
3/8" - 2" | ||||||
* Monowall pipe (natural); Skinned pipe (red, blue, white and orange); and Barrier pipe (red, blue,white and orange) are certified for the following sizes: 3/8", 1/2", 5/8", 3/4", 1", 1-1/2" & 2". Tubing certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked, as applicable with the following fitting system designation(s): ASTM F1960, ASTM F1807, ASTM F2159, and ASTM F2098. @ This tubing product has been evaluated against the performance requirements of ASTM F876/877 and CSA B137.5. This product is not NSF Certified for use in a potable water distribution system. This product has been evaluated for use in radiant floor heating, (NSF-rfh), applications only. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
||||||
Tubing* @ ¢ § |
PEX 5106 |
ALPHA PEX GUY |
CSA B137.5 |
|||
3/8" - 2" | ||||||
* Monowall pipe (natural); Skinned pipe (red, blue, white and orange); and Barrier pipe (red, blue,white and orange) are certified for the following sizes: 3/8", 1/2", 5/8", 3/4", 1", 1-1/2" & 2". Tubing certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked, as applicable with the following fitting system designation(s): ASTM F1960, ASTM F1807, ASTM F2159, and ASTM F2098. @ This tubing product has been evaluated against the performance requirements of ASTM F876/877 and CSA B137.5. This product is not NSF Certified for use in a potable water distribution system. This product has been evaluated for use in radiant floor heating, (NSF-rfh), applications only. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or documentation shipped with the product are Certified.
PEXhouse.com. Inc. | |
68 Healey Road Unit 4 -5 | |
Bolton, ON L7E 5A4 | |
Canada | |
844-548-8739 | |
Visit this company's website |
Facility : # 1 China
Product Type | Material Type | Trade Name | Product Standard | |||
Tubing& * ^ ~ ¢ +++ [G] |
PEX 5106[1] |
VesiPEX PEX-B |
CSA B137.5 |
|||
>= 1/8" | ||||||
& Meets the chlorine resistance requirements of ASTM F1281 when tested in accordance with ASTM F2023. * Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ~ Certified for Natural non-barrier single layer tubing for 1/8 - 3" sizes. Certified for red, white, blue 2-layer tubing for 1/2", 5/8", 3/4", 1" sizes only. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [1] Certified for red and white PEX 5106 monowall pipe. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Tubing* ^ ¢ +++ [G] |
PEX 5106[1] |
VesiPEX PEX-B |
ASTM F876/F877 |
|||
>= 1/8" | ||||||
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [1] Certified for red and white PEX 5106 monowall pipe. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Tubing* ^ ¢ +++ [2] [G] |
PEX |
VesiPEX PEX-B |
CSA B137.5 |
|||
>= 1/8" SDR 9 | ||||||
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [2] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked with the following fitting system designations: ASTM F1807, ASTM F2159, ASTM F1960, F2098. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Tubing! * ^ § +++ [G] |
PEX 5106 |
VesiPEX PEX-B |
ASTM F876/F877 |
|||
1/8" - 6" SDR 9 | ||||||
! Certified for natural, red, white and blue without oxygen barrier. Natural - 5006 * Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Tubing! * ^ § +++ [G] |
PEX 5106 |
VesiPEX PEX-B |
CSA B137.5 |
|||
1/8" - 6" SDR 9 | ||||||
! Certified for natural, red, white and blue without oxygen barrier. Natural - 5006 * Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Tubing* ^ ~ ¢ +++ [G] |
PEX 5106[3] |
VesiPEX PEX-A |
ASTM F876/F877 |
|||
1/2", 5/8", 3/4", 1" | ||||||
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ~ Certified for Natural non-barrier single layer tubing for 1/8 - 3" sizes. Certified for red, white, blue 2-layer tubing for 1/2", 5/8", 3/4", 1" sizes only. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [3] PEX 5106 Certified for Red, Blue ,White 2-layer for 1/2", 5/8", 3/4", 1" sizes only. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Tubing* ^ ~ ¢ +++ [2] [G] |
PEX 5106[3] |
VesiPEX PEX-A |
CSA B137.5 |
|||
1/2", 5/8", 3/4", 1" | ||||||
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ~ Certified for Natural non-barrier single layer tubing for 1/8 - 3" sizes. Certified for red, white, blue 2-layer tubing for 1/2", 5/8", 3/4", 1" sizes only. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [2] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked with the following fitting system designations: ASTM F1807, ASTM F2159, ASTM F1960, F2098. [3] PEX 5106 Certified for Red, Blue ,White 2-layer for 1/2", 5/8", 3/4", 1" sizes only. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Tubing* ^ ¢ +++ [G] |
PEX 5106[4] |
VesiPEX PEX-B |
ASTM F876/F877 |
|||
3/8" - 1" | ||||||
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [4] Certified for the following: 2-layer skinned (Natural PEX – White PE) pipe [PEX 5106]: 3/8", 1/2", 5/8",3/4" & 1" 2-layer skinned (Natural PEX – Red, White or Blue PE) pipe [PEX 5306]: 3/8", 1/2", 5/8",3/4" & 1" [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Tubing& * ^ ~ ¢ +++ [G] |
PEX 5106[4] |
VesiPEX PEX-B |
CSA B137.5 |
|||
3/8" - 1" | ||||||
& Meets the chlorine resistance requirements of ASTM F1281 when tested in accordance with ASTM F2023. * Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ~ Certified for Natural non-barrier single layer tubing for 1/8 - 3" sizes. Certified for red, white, blue 2-layer tubing for 1/2", 5/8", 3/4", 1" sizes only. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [4] Certified for the following: 2-layer skinned (Natural PEX – White PE) pipe [PEX 5106]: 3/8", 1/2", 5/8",3/4" & 1" 2-layer skinned (Natural PEX – Red, White or Blue PE) pipe [PEX 5306]: 3/8", 1/2", 5/8",3/4" & 1" [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
$ Certified for natural, orange, red, and white with oxygen barrier.
Product Type | Material Type | Trade Name | Product Standard | |||
Tubing* ^ ~ ¢ +++ [G] |
PEX 5106[1] [2] |
VesiPEX PEX-B |
CSA B137.5 |
|||
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ~ Certified for Natural non-barrier single layer tubing for 1/8 - 3" sizes. Certified for red, white, blue 2-layer tubing for 1/2", 5/8", 3/4", 1" sizes only. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [1] Certified for red and white PEX 5106 monowall pipe. [2] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer and shall be marked with the following fitting system designations: ASTM F1807, ASTM F2159, ASTM F1960, ASTM F2080, ASTM F2098 and ASSE 1061. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Tubing* ^ ¢ +++ [G] |
PEX 5106[1] |
VesiPEX PEX-B |
ASTM F876/F877 |
|||
>= 1/8" | ||||||
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [1] Certified for red and white PEX 5106 monowall pipe. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Tubing$ * ¢ § [5] |
PEX |
VesiPEX PEX-B |
CSA B137.5 |
|||
>= 1/8" SDR 9 | ||||||
$ Certified for natural, orange, red, and white with oxygen barrier. * Accepted by NSF for use in residential and commercial construction, including manufactured housing. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [5] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked with the following fitting system designations: ASTM F1807, ASTM F2159, ASTM F1960, ASTM F2080, F2098. |
||||||
Tubing$ * § |
PEX 5006 |
VesiPEX PEX-B |
ASTM F876/F877 |
|||
>= 1/8" SDR 9 | ||||||
$ Certified for natural, orange, red, and white with oxygen barrier. * Accepted by NSF for use in residential and commercial construction, including manufactured housing. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
||||||
Tubing! * ^ § |
PEX 5106 |
VesiPEX PEX-B |
ASTM F876/F877 |
|||
1/8" - 6" SDR 9 | ||||||
! Certified for natural, red, white and blue without oxygen barrier. Natural - 5006 * Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
||||||
Tubing! * ^ § |
PEX 5106 |
VesiPEX PEX-B |
CSA B137.5 |
|||
1/8" - 6" SDR 9 | ||||||
! Certified for natural, red, white and blue without oxygen barrier. Natural - 5006 * Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
||||||
Tubing* ^ ~ ¢ +++ [G] |
PEX 5006 |
VesiPEX PEX-A |
ASTM F876/F877 |
|||
1/8" - 3" | ||||||
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ~ Certified for Natural non-barrier single layer tubing for 1/8 - 3" sizes. Certified for red, white, blue 2-layer tubing for 1/2", 5/8", 3/4", 1" sizes only. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Tubing* ^ ~ ¢ +++ [G] |
PEX 5106[6] |
VesiPEX PEX-A |
ASTM F876/F877 |
|||
1/2", 5/8", 3/4", 1" | ||||||
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ~ Certified for Natural non-barrier single layer tubing for 1/8 - 3" sizes. Certified for red, white, blue 2-layer tubing for 1/2", 5/8", 3/4", 1" sizes only. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [6] PEX 5106 Certified for Red, Blue ,White 2-layer for 1/2", 5/8", 3/4", 1" sizes only. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Tubing* ^ ~ ¢ +++ [5] [G] |
PEX 5006 |
VesiPEX PEX-A |
CSA B137.5 |
|||
1/8" - 3" | ||||||
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ~ Certified for Natural non-barrier single layer tubing for 1/8 - 3" sizes. Certified for red, white, blue 2-layer tubing for 1/2", 5/8", 3/4", 1" sizes only. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [5] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked with the following fitting system designations: ASTM F1807, ASTM F2159, ASTM F1960, ASTM F2080, F2098. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Tubing* ^ ~ ¢ +++ [5] [G] |
PEX 5106[6] |
VesiPEX PEX-A |
CSA B137.5 |
|||
1/2", 5/8", 3/4", 1" | ||||||
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ~ Certified for Natural non-barrier single layer tubing for 1/8 - 3" sizes. Certified for red, white, blue 2-layer tubing for 1/2", 5/8", 3/4", 1" sizes only. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [5] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked with the following fitting system designations: ASTM F1807, ASTM F2159, ASTM F1960, ASTM F2080, F2098. [6] PEX 5106 Certified for Red, Blue ,White 2-layer for 1/2", 5/8", 3/4", 1" sizes only. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Tubing* ^ ¢ +++ [G] |
PEX 5106[7] |
VesiPEX PEX-B |
ASTM F876/F877 |
|||
3/8" - 1" | ||||||
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [7] Certified for the following: 2-layer skinned (Natural PEX – White PE) pipe [PEX 5106]: 3/8", 1/2", 5/8", 3/4" & 1" 2-layer skinned (Natural PEX – Red, White or Blue PE) pipe [PEX 5306]: 3/8", 1/2", 5/8", 3/4" & 1" [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Tubing& * ^ ~ ¢ +++ [G] |
PEX 5106[7] |
VesiPEX PEX-B |
CSA B137.5 |
|||
3/8" - 1" | ||||||
& Meets the chlorine resistance requirements of ASTM F1281 when tested in accordance with ASTM F2023 * Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ~ Certified for Natural non-barrier single layer tubing for 1/8 - 3" sizes. Certified for red, white, blue 2-layer tubing for 1/2", 5/8", 3/4", 1" sizes only. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [7] Certified for the following: 2-layer skinned (Natural PEX – White PE) pipe [PEX 5106]: 3/8", 1/2", 5/8", 3/4" & 1" 2-layer skinned (Natural PEX – Red, White or Blue PE) pipe [PEX 5306]: 3/8", 1/2", 5/8", 3/4" & 1" [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
Premier Pex Inc. | |
927 Calle Negocio STEO | |
San Clemente, CA 92673 | |
United States | |
949-340-4900 |
Facility : # 1 Spain
Product Type | Material Type | Trade Name | Product Standard | |||
Pipe* @ ¢ +++ [G] |
PEX 5106 |
PREMIER PEX |
ASTM F876/F877 |
|||
3/8" - 2" | ||||||
* Monowall pipe (natural); Skinned pipe (red, blue, white and orange); Skinned (black plus red, blue, white, or orange), and Barrier pipe (red, blue, white and orange) are certified for the following sizes: 3/8", 1/2", 5/8", 3/4", 1", 1-1/4", 1-1/2" & 2". Tubing certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked, as applicable with the following fitting system designation(s): ASTM F1960, ASTM F1807, ASTM F2159, and ASTM F2098. @ This tubing product has been evaluated against the performance requirements of ASTM F876/877 and CSA B137.5. This product is not NSF Certified for use in a potable water distribution system. This product has been evaluated for use in radiant floor heating, (NSF-rfh), applications only. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Pipe* @ ¢ +++ [G] |
PEX 5106 |
PREMIER PEX |
CSA B137.5 |
|||
3/8" - 2" | ||||||
* Monowall pipe (natural); Skinned pipe (red, blue, white and orange); Skinned (black plus red, blue, white, or orange), and Barrier pipe (red, blue, white and orange) are certified for the following sizes: 3/8", 1/2", 5/8", 3/4", 1", 1-1/4", 1-1/2" & 2". Tubing certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked, as applicable with the following fitting system designation(s): ASTM F1960, ASTM F1807, ASTM F2159, and ASTM F2098. @ This tubing product has been evaluated against the performance requirements of ASTM F876/877 and CSA B137.5. This product is not NSF Certified for use in a potable water distribution system. This product has been evaluated for use in radiant floor heating, (NSF-rfh), applications only. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or documentation shipped with the product are Certified.
Product Type | Material Type | Trade Name | Product Standard | |||
Tubing* @ ¢ § |
PEX 5106 |
PREMIER PEX |
ASTM F876/F877 |
|||
3/8" - 2" | ||||||
* Monowall pipe (natural); Skinned pipe (red, blue, white and orange); Skinned (black plus red, blue, white, or orange), and Barrier pipe (red, blue, white and orange) are certified for the following sizes: 3/8", 1/2", 5/8", 3/4", 1", 1-1/4", 1-1/2" & 2". Tubing certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked, as applicable with the following fitting system designation(s): ASTM F1960, ASTM F1807, ASTM F2159, and ASTM F2098. @ This tubing product has been evaluated against the performance requirements of ASTM F876/877 and CSA B137.5. This product is not NSF Certified for use in a potable water distribution system. This product has been evaluated for use in radiant floor heating, (NSF-rfh), applications only. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
||||||
Tubing* @ ¢ § |
PEX 5106 |
PREMIER PEX |
CSA B137.5 |
|||
3/8" - 2" | ||||||
* Monowall pipe (natural); Skinned pipe (red, blue, white and orange); Skinned (black plus red, blue, white, or orange), and Barrier pipe (red, blue, white and orange) are certified for the following sizes: 3/8", 1/2", 5/8", 3/4", 1", 1-1/4", 1-1/2" & 2". Tubing certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked, as applicable with the following fitting system designation(s): ASTM F1960, ASTM F1807, ASTM F2159, and ASTM F2098. @ This tubing product has been evaluated against the performance requirements of ASTM F876/877 and CSA B137.5. This product is not NSF Certified for use in a potable water distribution system. This product has been evaluated for use in radiant floor heating, (NSF-rfh), applications only. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or documentation shipped with the product are Certified.
REHAU Construction LLC | ![]() |
1501 Edwards Ferry Road, N.E. | |
Leesburg, VA 20176 | |
United States | |
800-247-9445 | |
703-777-5255 | |
Visit this company's website |
Facility : # 1 Germany
Product Type | Material Type | Trade Name | Product Standard | |||
Tubing[3] [4] |
PEX |
Raupex® White UV Shield |
CAN/ULC S102.2 |
|||
1/2" - 2" | ||||||
[3] Flame Spread Value (FSV) <= 25; Smoke Developed Value (SDV) <= 50. [4] Flame Spread Index and Smoke Developed Index based on when tubing is field insulated with 1/2" Micro-lok HP Hi performance fiberglass insulation with Everloc+P/Everloc+ Fittings as per Rehau installation instructions. Tubing shall be marked [cNSF®-fs CAN/ULC S102.2 FS<=25/SD<=50]. |
||||||
Tubing[3] [4] |
PEX |
Raupex® Red UV Shield |
CAN/ULC S102.2 |
|||
1/2" - 2" | ||||||
[3] Flame Spread Value (FSV) <= 25; Smoke Developed Value (SDV) <= 50. [4] Flame Spread Index and Smoke Developed Index based on when tubing is field insulated with 1/2" Micro-lok HP Hi performance fiberglass insulation with Everloc+P/Everloc+ Fittings as per Rehau installation instructions. Tubing shall be marked [cNSF®-fs CAN/ULC S102.2 FS<=25/SD<=50]. |
||||||
Tubing* [1] |
PEX |
Municipex® |
ASTM E84 |
|||
3/4" - 2" | ||||||
* Flame Spread Index and Smoke Developed Index based on when tubing is field insulated with minimum 1/2" Microlok HP Hi performance fiberglass insulation as per Rehau installation instructions. [1] Flame Spread Index <= 25; Smoke Developed Index <= 50. |
||||||
Tubing*** [1] |
PEX |
Municipex® |
ASTM E84 |
|||
3/4" - 2" | ||||||
*** Flame Spread Index and Smoke Developed Index based on ASTM E84 Steiner tunnel modified using piping supported with a minimum length of 48-inch Rehau pipe supports spaced a maximum distance of 10-inches between each Rehau Pipe Support Run. Tubing shall be marked [NSF®-fs ASTM E84 FS<=25/SD<=50]. [1] Flame Spread Index <= 25; Smoke Developed Index <= 50. |
||||||
Tubing[2] [3] |
PEX |
Municipex® |
CAN/ULC S102.2 |
|||
3/4" - 2" | ||||||
[2] Flame Spread Index and Smoke Developed Index based on when tubing is field insulated with minimum 1/2" JM Microlok or Armaflex insulation as per Rehau installation instructions. [3] Flame Spread Value (FSV) <= 25; Smoke Developed Value (SDV) <= 50. |
||||||
Tubing* [1] |
PEX |
Raupex® O2 Barrier |
ASTM E84 |
|||
1/2" - 2" | ||||||
* Flame Spread Index and Smoke Developed Index based on when tubing is field insulated with minimum 1/2" Microlok HP Hi performance fiberglass insulation as per Rehau installation instructions. [1] Flame Spread Index <= 25; Smoke Developed Index <= 50. |
||||||
Tubing** [1] |
PEX |
Raupex® O2 Barrier |
ASTM E84 |
|||
<= 1/2" | ||||||
** Flame Spread Index and Smoke Developed Index based on minimum spacing of 18 inches between tubing runs with Everloc+P, Everloc+ fittings. Tubing shall be marked [NSF®-fs ASTM E84 FS<=25/SD<=50]. [1] Flame Spread Index <= 25; Smoke Developed Index <= 50. |
||||||
Tubing[3] |
PEX |
Raupex® O2 Barrier |
CAN/ULC S102.2 |
|||
<= 1/2" | ||||||
[3] Flame Spread Value (FSV) <= 25; Smoke Developed Value (SDV) <= 50. |
||||||
Tubing[2] [3] |
PEX |
Raupex® O2 Barrier |
CAN/ULC S102.2 |
|||
5/8" - 2" | ||||||
[2] Flame Spread Index and Smoke Developed Index based on when tubing is field insulated with minimum 1/2" JM Microlok or Armaflex insulation as per Rehau installation instructions. [3] Flame Spread Value (FSV) <= 25; Smoke Developed Value (SDV) <= 50. |
||||||
Tubing* [1] |
PEX |
Raupex® |
ASTM E84 |
|||
1/2" - 2" | ||||||
* Flame Spread Index and Smoke Developed Index based on when tubing is field insulated with minimum 1/2" Microlok HP Hi performance fiberglass insulation as per Rehau installation instructions. [1] Flame Spread Index <= 25; Smoke Developed Index <= 50. |
||||||
Tubing** [1] |
PEX |
Raupex® |
ASTM E84 |
|||
<= 3/4" | ||||||
** Flame Spread Index and Smoke Developed Index based on minimum spacing of 18 inches between tubing runs with Everloc+P, Everloc+ fittings. Tubing shall be marked [NSF®-fs ASTM E84 FS<=25/SD<=50]. [1] Flame Spread Index <= 25; Smoke Developed Index <= 50. |
||||||
Tubing*** [1] |
PEX |
Raupex® |
ASTM E84 |
|||
3/4" - 2" | ||||||
*** Flame Spread Index and Smoke Developed Index based on ASTM E84 Steiner tunnel modified using piping supported with a minimum length of 48-inch Rehau pipe supports spaced a maximum distance of 10-inches between each Rehau Pipe Support Run. Tubing shall be marked [NSF®-fs ASTM E84 FS<=25/SD<=50]. [1] Flame Spread Index <= 25; Smoke Developed Index <= 50. |
||||||
Tubing[3] |
PEX |
Raupex® |
CAN/ULC S102.2 |
|||
<= 1/2" | ||||||
[3] Flame Spread Value (FSV) <= 25; Smoke Developed Value (SDV) <= 50. |
||||||
Tubing[2] [3] |
PEX |
Raupex® |
CAN/ULC S102.2 |
|||
1/2" - 2" | ||||||
[2] Flame Spread Index and Smoke Developed Index based on when tubing is field insulated with minimum 1/2" JM Microlok or Armaflex insulation as per Rehau installation instructions. [3] Flame Spread Value (FSV) <= 25; Smoke Developed Value (SDV) <= 50. |
||||||
Tubing* [1] |
PEX |
Raupex® Blue UV Shield |
ASTM E84 |
|||
1/2" - 2" | ||||||
* Flame Spread Index and Smoke Developed Index based on when tubing is field insulated with minimum 1/2" Microlok HP Hi performance fiberglass insulation as per Rehau installation instructions. [1] Flame Spread Index <= 25; Smoke Developed Index <= 50. |
||||||
Tubing** [1] |
PEX |
Raupex® Blue UV Shield |
ASTM E84 |
|||
<= 3/4" | ||||||
** Flame Spread Index and Smoke Developed Index based on minimum spacing of 18 inches between tubing runs with Everloc+P, Everloc+ fittings. Tubing shall be marked [NSF®-fs ASTM E84 FS<=25/SD<=50]. [1] Flame Spread Index <= 25; Smoke Developed Index <= 50. |
||||||
Tubing*** [1] |
PEX |
Raupex® Blue UV Shield |
ASTM E84 |
|||
3/4" - 2" | ||||||
*** Flame Spread Index and Smoke Developed Index based on ASTM E84 Steiner tunnel modified using piping supported with a minimum length of 48-inch Rehau pipe supports spaced a maximum distance of 10-inches between each Rehau Pipe Support Run. Tubing shall be marked [NSF®-fs ASTM E84 FS<=25/SD<=50]. [1] Flame Spread Index <= 25; Smoke Developed Index <= 50. |
||||||
Tubing[1] ***** |
PEX |
Raupex® Blue UV Shield |
ASTM E84 |
|||
1/2" - 2" | ||||||
[1] Flame Spread Index <= 25; Smoke Developed Index <= 50. ***** Flame Spread Index and Smoke Developed Index based on when tubing is field insulated with minimum 1/2" Micro-lok HP Hi performance fiberglass insulation with Everloc+P/Everloc+ Fittings as per Rehau installation instructions. Tubing shall be marked [NSF®-fs ASTM E84 FS<=25/SD<=50]. |
||||||
Tubing[3] |
PEX |
Raupex® Blue UV Shield |
CAN/ULC S102.2 |
|||
<= 1/2" | ||||||
[3] Flame Spread Value (FSV) <= 25; Smoke Developed Value (SDV) <= 50. |
||||||
Tubing[2] [3] |
PEX |
Raupex® Blue UV Shield |
CAN/ULC S102.2 |
|||
1/2" - 2" | ||||||
[2] Flame Spread Index and Smoke Developed Index based on when tubing is field insulated with minimum 1/2" JM Microlok or Armaflex insulation as per Rehau installation instructions. [3] Flame Spread Value (FSV) <= 25; Smoke Developed Value (SDV) <= 50. |
||||||
Tubing* [1] |
PEX |
Raupex® Red UV Shield |
ASTM E84 |
|||
1/2" - 2" | ||||||
* Flame Spread Index and Smoke Developed Index based on when tubing is field insulated with minimum 1/2" Microlok HP Hi performance fiberglass insulation as per Rehau installation instructions. [1] Flame Spread Index <= 25; Smoke Developed Index <= 50. |
||||||
Tubing[3] [4] |
PEX |
Raupex® Blue UV Shield |
CAN/ULC S102.2 |
|||
1/2" - 2" | ||||||
[3] Flame Spread Value (FSV) <= 25; Smoke Developed Value (SDV) <= 50. [4] Flame Spread Index and Smoke Developed Index based on when tubing is field insulated with 1/2" Micro-lok HP Hi performance fiberglass insulation with Everloc+P/Everloc+ Fittings as per Rehau installation instructions. Tubing shall be marked [cNSF®-fs CAN/ULC S102.2 FS<=25/SD<=50]. |
||||||
Tubing** [1] |
PEX |
Raupex® Red UV Shield |
ASTM E84 |
|||
<= 3/4" | ||||||
** Flame Spread Index and Smoke Developed Index based on minimum spacing of 18 inches between tubing runs with Everloc+P, Everloc+ fittings. Tubing shall be marked [NSF®-fs ASTM E84 FS<=25/SD<=50]. [1] Flame Spread Index <= 25; Smoke Developed Index <= 50. |
||||||
Tubing*** [1] |
PEX |
Raupex® Red UV Shield |
ASTM E84 |
|||
3/4" - 2" | ||||||
*** Flame Spread Index and Smoke Developed Index based on ASTM E84 Steiner tunnel modified using piping supported with a minimum length of 48-inch Rehau pipe supports spaced a maximum distance of 10-inches between each Rehau Pipe Support Run. Tubing shall be marked [NSF®-fs ASTM E84 FS<=25/SD<=50]. [1] Flame Spread Index <= 25; Smoke Developed Index <= 50. |
||||||
Tubing[1] ***** |
PEX |
Raupex® Red UV Shield |
ASTM E84 |
|||
1/2" - 2" | ||||||
[1] Flame Spread Index <= 25; Smoke Developed Index <= 50. ***** Flame Spread Index and Smoke Developed Index based on when tubing is field insulated with minimum 1/2" Micro-lok HP Hi performance fiberglass insulation with Everloc+P/Everloc+ Fittings as per Rehau installation instructions. Tubing shall be marked [NSF®-fs ASTM E84 FS<=25/SD<=50]. |
||||||
Tubing[3] |
PEX |
Raupex® Red UV Shield |
CAN/ULC S102.2 |
|||
<= 1/2" | ||||||
[3] Flame Spread Value (FSV) <= 25; Smoke Developed Value (SDV) <= 50. |
||||||
Tubing[2] [3] |
PEX |
Raupex® Red UV Shield |
CAN/ULC S102.2 |
|||
1/2" - 2" | ||||||
[2] Flame Spread Index and Smoke Developed Index based on when tubing is field insulated with minimum 1/2" JM Microlok or Armaflex insulation as per Rehau installation instructions. [3] Flame Spread Value (FSV) <= 25; Smoke Developed Value (SDV) <= 50. |
||||||
Tubing* [1] |
PEX |
Raupex® White UV Shield |
ASTM E84 |
|||
1/2" - 2" | ||||||
* Flame Spread Index and Smoke Developed Index based on when tubing is field insulated with minimum 1/2" Microlok HP Hi performance fiberglass insulation as per Rehau installation instructions. [1] Flame Spread Index <= 25; Smoke Developed Index <= 50. |
||||||
Tubing** [1] |
PEX |
Raupex® White UV Shield |
ASTM E84 |
|||
<= 3/4" | ||||||
** Flame Spread Index and Smoke Developed Index based on minimum spacing of 18 inches between tubing runs with Everloc+P, Everloc+ fittings. Tubing shall be marked [NSF®-fs ASTM E84 FS<=25/SD<=50]. [1] Flame Spread Index <= 25; Smoke Developed Index <= 50. |
||||||
Tubing*** [1] |
PEX |
Raupex® White UV Shield |
ASTM E84 |
|||
3/4" - 2" | ||||||
*** Flame Spread Index and Smoke Developed Index based on ASTM E84 Steiner tunnel modified using piping supported with a minimum length of 48-inch Rehau pipe supports spaced a maximum distance of 10-inches between each Rehau Pipe Support Run. Tubing shall be marked [NSF®-fs ASTM E84 FS<=25/SD<=50]. [1] Flame Spread Index <= 25; Smoke Developed Index <= 50. |
||||||
Tubing[1] ***** |
PEX |
Raupex® White UV Shield |
ASTM E84 |
|||
1/2" - 2" | ||||||
[1] Flame Spread Index <= 25; Smoke Developed Index <= 50. ***** Flame Spread Index and Smoke Developed Index based on when tubing is field insulated with minimum 1/2" Micro-lok HP Hi performance fiberglass insulation with Everloc+P/Everloc+ Fittings as per Rehau installation instructions. Tubing shall be marked [NSF®-fs ASTM E84 FS<=25/SD<=50]. |
||||||
Tubing[3] |
PEX |
Raupex® White UV Shield |
CAN/ULC S102.2 |
|||
<= 1/2" | ||||||
[3] Flame Spread Value (FSV) <= 25; Smoke Developed Value (SDV) <= 50. |
||||||
Tubing[2] [3] |
PEX |
Raupex® White UV Shield |
CAN/ULC S102.2 |
|||
1/2" - 2" | ||||||
[2] Flame Spread Index and Smoke Developed Index based on when tubing is field insulated with minimum 1/2" JM Microlok or Armaflex insulation as per Rehau installation instructions. [3] Flame Spread Value (FSV) <= 25; Smoke Developed Value (SDV) <= 50. |
||||||
Tubing[2] [3] |
PEX |
RAUGEO |
CAN/ULC S102.2 |
|||
1/2" - 2" | ||||||
[2] Flame Spread Index and Smoke Developed Index based on when tubing is field insulated with minimum 1/2" JM Microlok or Armaflex insulation as per Rehau installation instructions. [3] Flame Spread Value (FSV) <= 25; Smoke Developed Value (SDV) <= 50. |
Product Type | Material Type | Trade Name | Product Standard | |||
Pipe* ^ +++ [G] |
PEX 3306 |
MUNICIPEX |
ASTM F876/F877 |
|||
1/2" - 2" SDR 9 | ||||||
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Pipe* ^ +++ [G] |
PEX 3306 |
MUNICIPEX |
AWWA C904 |
|||
1/2" - 2" SDR 9 | ||||||
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Pipe& * ^ ¢ § +++ [G] |
PEX |
MUNICIPEX |
CSA B137.5 |
|||
1/2" - 2" SDR 9 | ||||||
& Tubing certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked, as applicable, with the following fitting system designation(s): AWWA C800. * Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Pipe* ^ § +++ [G] |
PEX 3306 |
RAUPEX® Blue UV-Shield |
ASTM F876/F877 |
|||
3/8" - 2" SDR 9 | ||||||
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Pipe% * ^ ¢ § +++ [G] |
PEX |
RAUPEX® Blue UV-Shield |
CSA B137.5 |
|||
3/8" - 2" SDR 9 | ||||||
% Tubing certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked, as applicable, with the following fitting system designation(s): ASTM F877, F1807, F1960, F2080 and F2159. * Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Pipe* ^ § +++ [G] |
PEX 3306 |
RAUPEX Red UV-Shield |
ASTM F876/F877 |
|||
3/8" - 2" SDR 9 | ||||||
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Pipe% * ^ ¢ § +++ [G] |
PEX |
RAUPEX Red UV-Shield |
CSA B137.5 |
|||
3/8" - 2" SDR 9 | ||||||
% Tubing certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked, as applicable, with the following fitting system designation(s): ASTM F877, F1807, F1960, F2080 and F2159. * Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Pipe* ^ § +++ [G] |
PEX 3306 |
RAUPEX White UV-Shield |
ASTM F876/F877 |
|||
3/8" - 2" SDR 9 | ||||||
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Pipe% * ^ ¢ § +++ [G] |
PEX |
RAUPEX White UV-Shield |
CSA B137.5 |
|||
3/8" - 2" SDR 9 | ||||||
% Tubing certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked, as applicable, with the following fitting system designation(s): ASTM F877, F1807, F1960, F2080 and F2159. * Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
Product Type | Material Type | Trade Name | Product Standard | |||
Pipe$ * ^ § |
PEX 3006 |
RAUPEX® |
ASTM F876/F877 |
|||
3/8" - 2" SDR 9 | ||||||
$ Non-barrier pipe. * Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
||||||
Pipe$ % * § |
PEX 3006 |
RAUPEX® |
CSA B137.5 |
|||
3/8" - 2" SDR 9 | ||||||
$ Non-barrier pipe. % Tubing certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked, as applicable, with the following fitting system designation(s): ASTM F877, F1807, F1960, F2080 and F2159. * Accepted by NSF for use in residential and commercial construction, including manufactured housing. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
||||||
Pipe* ¥ |
PEX 0306 |
Raupex Black UV Shield |
ASTM F876/F877 |
|||
3/8" - 2" | ||||||
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. ¥ Product is Certified to the Uniform Mechanical Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Mechanical Code™. |
||||||
Pipe% * ¢ ¥ |
PEX |
Raupex Black UV Shield |
CSA B137.5 |
|||
3/8" - 2" | ||||||
% Tubing certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked, as applicable, with the following fitting system designation(s): ASTM F877, F1807, F1960, F2080 and F2159. * Accepted by NSF for use in residential and commercial construction, including manufactured housing. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. ¥ Product is Certified to the Uniform Mechanical Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Mechanical Code™. |
Facility : # 7 USA
Product Type | Material Type | Trade Name | Product Standard | |||
Tubing* [1] |
PEX |
Municipex® |
ASTM E84 |
|||
3/4" - 2" | ||||||
* Flame Spread Index and Smoke Developed Index based on when tubing is field insulated with minimum 1/2" Microlok HP Hi performance fiberglass insulation as per Rehau installation instructions. [1] Flame Spread Index <= 25; Smoke Developed Index <= 50. |
||||||
Tubing*** [1] |
PEX |
Municipex® |
ASTM E84 |
|||
3/4" - 2" | ||||||
*** Flame Spread Index and Smoke Developed Index based on ASTM E84 Steiner tunnel modified using piping supported with a minimum length of 48-inch Rehau pipe supports spaced a maximum distance of 10-inches between each Rehau Pipe Support Run. Tubing shall be marked [NSF®-fs ASTM E84 FS<=25/SD<=50]. [1] Flame Spread Index <= 25; Smoke Developed Index <= 50. |
||||||
Tubing[2] [3] |
PEX |
Municipex® |
CAN/ULC S102.2 |
|||
3/4" - 2" | ||||||
[2] Flame Spread Index and Smoke Developed Index based on when tubing is field insulated with minimum 1/2" JM Microlok or Armaflex insulation as per Rehau installation instructions. [3] Flame Spread Value (FSV) <= 25; Smoke Developed Value (SDV) <= 50. |
||||||
Tubing* [1] |
PEX |
Municipex® Reclaim |
ASTM E84 |
|||
3/4" - 2" | ||||||
* Flame Spread Index and Smoke Developed Index based on when tubing is field insulated with minimum 1/2" Microlok HP Hi performance fiberglass insulation as per Rehau installation instructions. [1] Flame Spread Index <= 25; Smoke Developed Index <= 50. |
||||||
Tubing*** [1] |
PEX |
Municipex® Reclaim |
ASTM E84 |
|||
3/4" - 2" | ||||||
*** Flame Spread Index and Smoke Developed Index based on ASTM E84 Steiner tunnel modified using piping supported with a minimum length of 48-inch Rehau pipe supports spaced a maximum distance of 10-inches between each Rehau Pipe Support Run. Tubing shall be marked [NSF®-fs ASTM E84 FS<=25/SD<=50]. [1] Flame Spread Index <= 25; Smoke Developed Index <= 50. |
||||||
Tubing[2] [3] |
PEX |
Municipex® Reclaim |
CAN/ULC S102.2 |
|||
3/4" - 2" | ||||||
[2] Flame Spread Index and Smoke Developed Index based on when tubing is field insulated with minimum 1/2" JM Microlok or Armaflex insulation as per Rehau installation instructions. [3] Flame Spread Value (FSV) <= 25; Smoke Developed Value (SDV) <= 50. |
||||||
Tubing** [1] |
PEX |
Raupex® O2 Barrier |
ASTM E84 |
|||
<= 1/2" | ||||||
** Flame Spread Index and Smoke Developed Index based on minimum spacing of 18 inches between tubing runs with Everloc+P, Everloc+ fittings. Tubing shall be marked [NSF®-fs ASTM E84 FS<=25/SD<=50]. [1] Flame Spread Index <= 25; Smoke Developed Index <= 50. |
||||||
Tubing* [1] |
PEX |
Raupex® O2 Barrier |
ASTM E84 |
|||
5/8" - 2" | ||||||
* Flame Spread Index and Smoke Developed Index based on when tubing is field insulated with minimum 1/2" Microlok HP Hi performance fiberglass insulation as per Rehau installation instructions. [1] Flame Spread Index <= 25; Smoke Developed Index <= 50. |
||||||
Tubing[3] |
PEX |
Raupex® O2 Barrier |
CAN/ULC S102.2 |
|||
<= 1/2" | ||||||
[3] Flame Spread Value (FSV) <= 25; Smoke Developed Value (SDV) <= 50. |
||||||
Tubing[2] [3] |
PEX |
Raupex® O2 Barrier |
CAN/ULC S102.2 |
|||
5/8" - 2" | ||||||
[2] Flame Spread Index and Smoke Developed Index based on when tubing is field insulated with minimum 1/2" JM Microlok or Armaflex insulation as per Rehau installation instructions. [3] Flame Spread Value (FSV) <= 25; Smoke Developed Value (SDV) <= 50. |
||||||
Tubing** [1] |
PEX |
Raupex® |
ASTM E84 |
|||
<= 3/4" | ||||||
** Flame Spread Index and Smoke Developed Index based on minimum spacing of 18 inches between tubing runs with Everloc+P, Everloc+ fittings. Tubing shall be marked [NSF®-fs ASTM E84 FS<=25/SD<=50]. [1] Flame Spread Index <= 25; Smoke Developed Index <= 50. |
||||||
Tubing* [1] |
PEX |
Raupex® |
ASTM E84 |
|||
5/8" - 2" | ||||||
* Flame Spread Index and Smoke Developed Index based on when tubing is field insulated with minimum 1/2" Microlok HP Hi performance fiberglass insulation as per Rehau installation instructions. [1] Flame Spread Index <= 25; Smoke Developed Index <= 50. |
||||||
Tubing*** [1] |
PEX |
Raupex® |
ASTM E84 |
|||
3/4" - 2" | ||||||
*** Flame Spread Index and Smoke Developed Index based on ASTM E84 Steiner tunnel modified using piping supported with a minimum length of 48-inch Rehau pipe supports spaced a maximum distance of 10-inches between each Rehau Pipe Support Run. Tubing shall be marked [NSF®-fs ASTM E84 FS<=25/SD<=50]. [1] Flame Spread Index <= 25; Smoke Developed Index <= 50. |
||||||
Tubing[3] |
PEX |
Raupex® |
CAN/ULC S102.2 |
|||
<= 1/2" | ||||||
[3] Flame Spread Value (FSV) <= 25; Smoke Developed Value (SDV) <= 50. |
||||||
Tubing[2] [3] |
PEX |
Raupex® |
CAN/ULC S102.2 |
|||
5/8" - 2" | ||||||
[2] Flame Spread Index and Smoke Developed Index based on when tubing is field insulated with minimum 1/2" JM Microlok or Armaflex insulation as per Rehau installation instructions. [3] Flame Spread Value (FSV) <= 25; Smoke Developed Value (SDV) <= 50. |
||||||
Tubing** [1] |
PEX |
Raupex® Blue UV Shield |
ASTM E84 |
|||
<= 3/4" | ||||||
** Flame Spread Index and Smoke Developed Index based on minimum spacing of 18 inches between tubing runs with Everloc+P, Everloc+ fittings. Tubing shall be marked [NSF®-fs ASTM E84 FS<=25/SD<=50]. [1] Flame Spread Index <= 25; Smoke Developed Index <= 50. |
||||||
Tubing* [1] |
PEX |
Raupex® Blue UV Shield |
ASTM E84 |
|||
5/8" - 2" | ||||||
* Flame Spread Index and Smoke Developed Index based on when tubing is field insulated with minimum 1/2" Microlok HP Hi performance fiberglass insulation as per Rehau installation instructions. [1] Flame Spread Index <= 25; Smoke Developed Index <= 50. |
||||||
Tubing*** [1] |
PEX |
Raupex® Blue UV Shield |
ASTM E84 |
|||
3/4" - 2" | ||||||
*** Flame Spread Index and Smoke Developed Index based on ASTM E84 Steiner tunnel modified using piping supported with a minimum length of 48-inch Rehau pipe supports spaced a maximum distance of 10-inches between each Rehau Pipe Support Run. Tubing shall be marked [NSF®-fs ASTM E84 FS<=25/SD<=50]. [1] Flame Spread Index <= 25; Smoke Developed Index <= 50. |
||||||
Tubing[1] **** |
PEX |
Raupex® Blue UV Shield |
ASTM E84 |
|||
1/2" - 2" | ||||||
[1] Flame Spread Index <= 25; Smoke Developed Index <= 50. **** Flame Spread Index and Smoke Developed Index based on when tubing is field insulated with minimum 1/2" Micro-lok HP Hi performance fiberglass insulation with Everloc+P/Everloc+ Fittings as per Rehau installation instructions. Tubing shall be marked [NSF®-fs ASTM E84 FS<=25/SD<=50]. |
||||||
Tubing[3] |
PEX |
Raupex® Blue UV Shield |
CAN/ULC S102.2 |
|||
<= 1/2" | ||||||
[3] Flame Spread Value (FSV) <= 25; Smoke Developed Value (SDV) <= 50. |
||||||
Tubing[2] [3] |
PEX |
Raupex® Blue UV Shield |
CAN/ULC S102.2 |
|||
5/8" - 2" | ||||||
[2] Flame Spread Index and Smoke Developed Index based on when tubing is field insulated with minimum 1/2" JM Microlok or Armaflex insulation as per Rehau installation instructions. [3] Flame Spread Value (FSV) <= 25; Smoke Developed Value (SDV) <= 50. |
||||||
Tubing[3] [4] |
PEX |
Raupex® Blue UV Shield |
CAN/ULC S102.2 |
|||
1/2" - 2" | ||||||
[3] Flame Spread Value (FSV) <= 25; Smoke Developed Value (SDV) <= 50. [4] Flame Spread Index and Smoke Developed Index based on when tubing is field insulated with 1/2" Micro-lok HP Hi performance fiberglass insulation with Everloc+P/Everloc+ Fittings as per Rehau installation instructions. Tubing shall be marked [cNSF®-fs CAN/ULC S102.2 FS<=25/SD<=50]. |
||||||
Tubing** [1] |
PEX |
Raupex® Red UV Shield |
ASTM E84 |
|||
<= 3/4" | ||||||
** Flame Spread Index and Smoke Developed Index based on minimum spacing of 18 inches between tubing runs with Everloc+P, Everloc+ fittings. Tubing shall be marked [NSF®-fs ASTM E84 FS<=25/SD<=50]. [1] Flame Spread Index <= 25; Smoke Developed Index <= 50. |
||||||
Tubing* [1] |
PEX |
Raupex® Red UV Shield |
ASTM E84 |
|||
5/8" - 2" | ||||||
* Flame Spread Index and Smoke Developed Index based on when tubing is field insulated with minimum 1/2" Microlok HP Hi performance fiberglass insulation as per Rehau installation instructions. [1] Flame Spread Index <= 25; Smoke Developed Index <= 50. |
||||||
Tubing*** [1] |
PEX |
Raupex® Red UV Shield |
ASTM E84 |
|||
3/4" - 2" | ||||||
*** Flame Spread Index and Smoke Developed Index based on ASTM E84 Steiner tunnel modified using piping supported with a minimum length of 48-inch Rehau pipe supports spaced a maximum distance of 10-inches between each Rehau Pipe Support Run. Tubing shall be marked [NSF®-fs ASTM E84 FS<=25/SD<=50]. [1] Flame Spread Index <= 25; Smoke Developed Index <= 50. |
||||||
Tubing[1] **** |
PEX |
Raupex® Red UV Shield |
ASTM E84 |
|||
1/2" - 2" | ||||||
[1] Flame Spread Index <= 25; Smoke Developed Index <= 50. **** Flame Spread Index and Smoke Developed Index based on when tubing is field insulated with minimum 1/2" Micro-lok HP Hi performance fiberglass insulation with Everloc+P/Everloc+ Fittings as per Rehau installation instructions. Tubing shall be marked [NSF®-fs ASTM E84 FS<=25/SD<=50]. |
||||||
Tubing[3] |
PEX |
Raupex® Red UV Shield |
CAN/ULC S102.2 |
|||
<= 1/2" | ||||||
[3] Flame Spread Value (FSV) <= 25; Smoke Developed Value (SDV) <= 50. |
||||||
Tubing[2] [3] |
PEX |
Raupex® Red UV Shield |
CAN/ULC S102.2 |
|||
5/8" - 2" | ||||||
[2] Flame Spread Index and Smoke Developed Index based on when tubing is field insulated with minimum 1/2" JM Microlok or Armaflex insulation as per Rehau installation instructions. [3] Flame Spread Value (FSV) <= 25; Smoke Developed Value (SDV) <= 50. |
||||||
Tubing[3] [4] |
PEX |
Raupex® Red UV Shield |
CAN/ULC S102.2 |
|||
1/2" - 2" | ||||||
[3] Flame Spread Value (FSV) <= 25; Smoke Developed Value (SDV) <= 50. [4] Flame Spread Index and Smoke Developed Index based on when tubing is field insulated with 1/2" Micro-lok HP Hi performance fiberglass insulation with Everloc+P/Everloc+ Fittings as per Rehau installation instructions. Tubing shall be marked [cNSF®-fs CAN/ULC S102.2 FS<=25/SD<=50]. |
||||||
Tubing** [1] |
PEX |
Raupex® White UV Shield |
ASTM E84 |
|||
<= 3/4" | ||||||
** Flame Spread Index and Smoke Developed Index based on minimum spacing of 18 inches between tubing runs with Everloc+P, Everloc+ fittings. Tubing shall be marked [NSF®-fs ASTM E84 FS<=25/SD<=50]. [1] Flame Spread Index <= 25; Smoke Developed Index <= 50. |
||||||
Tubing* [1] |
PEX |
Raupex® White UV Shield |
ASTM E84 |
|||
5/8" - 2" | ||||||
* Flame Spread Index and Smoke Developed Index based on when tubing is field insulated with minimum 1/2" Microlok HP Hi performance fiberglass insulation as per Rehau installation instructions. [1] Flame Spread Index <= 25; Smoke Developed Index <= 50. |
||||||
Tubing*** [1] |
PEX |
Raupex® White UV Shield |
ASTM E84 |
|||
3/4" - 2" | ||||||
*** Flame Spread Index and Smoke Developed Index based on ASTM E84 Steiner tunnel modified using piping supported with a minimum length of 48-inch Rehau pipe supports spaced a maximum distance of 10-inches between each Rehau Pipe Support Run. Tubing shall be marked [NSF®-fs ASTM E84 FS<=25/SD<=50]. [1] Flame Spread Index <= 25; Smoke Developed Index <= 50. |
||||||
Tubing[1] **** |
PEX |
Raupex® White UV Shield |
ASTM E84 |
|||
1/2" - 2" | ||||||
[1] Flame Spread Index <= 25; Smoke Developed Index <= 50. **** Flame Spread Index and Smoke Developed Index based on when tubing is field insulated with minimum 1/2" Micro-lok HP Hi performance fiberglass insulation with Everloc+P/Everloc+ Fittings as per Rehau installation instructions. Tubing shall be marked [NSF®-fs ASTM E84 FS<=25/SD<=50]. |
||||||
Tubing[3] |
PEX |
Raupex® White UV Shield |
CAN/ULC S102.2 |
|||
<= 1/2" | ||||||
[3] Flame Spread Value (FSV) <= 25; Smoke Developed Value (SDV) <= 50. |
||||||
Tubing[2] [3] |
PEX |
Raupex® White UV Shield |
CAN/ULC S102.2 |
|||
5/8" - 2" | ||||||
[2] Flame Spread Index and Smoke Developed Index based on when tubing is field insulated with minimum 1/2" JM Microlok or Armaflex insulation as per Rehau installation instructions. [3] Flame Spread Value (FSV) <= 25; Smoke Developed Value (SDV) <= 50. |
||||||
Tubing[3] [4] |
PEX |
Raupex® White UV Shield |
CAN/ULC S102.2 |
|||
1/2" - 2" | ||||||
[3] Flame Spread Value (FSV) <= 25; Smoke Developed Value (SDV) <= 50. [4] Flame Spread Index and Smoke Developed Index based on when tubing is field insulated with 1/2" Micro-lok HP Hi performance fiberglass insulation with Everloc+P/Everloc+ Fittings as per Rehau installation instructions. Tubing shall be marked [cNSF®-fs CAN/ULC S102.2 FS<=25/SD<=50]. |
||||||
Tubing[2] [3] |
PEX |
RAUGEO |
CAN/ULC S102.2 |
|||
3/4" - 2" | ||||||
[2] Flame Spread Index and Smoke Developed Index based on when tubing is field insulated with minimum 1/2" JM Microlok or Armaflex insulation as per Rehau installation instructions. [3] Flame Spread Value (FSV) <= 25; Smoke Developed Value (SDV) <= 50. |
Product Type | Material Type | Trade Name | Product Standard | ||||
Pipe* ^ § +++ [G] |
PEX 3306 |
MUNICIPEX |
ASTM F876/F877 |
||||
1/2" - 2" SDR 9 | |||||||
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
|||||||
Pipe* ^ § +++ [G] |
PEX 3306 |
MUNICIPEX |
AWWA C904 |
||||
1/2" - 2" SDR 9 | |||||||
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
|||||||
Pipe% * ^ ¢ § +++ [G] |
PEX |
MUNICIPEX |
CSA B137.5 |
||||
3/4" - 2" | |||||||
% Tubing certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked, as applicable, with the following fitting system designation(s): ASTM F877, F1807, F1960, F2080 and F2159. * Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
|||||||
Pipe* ^ +++ [G] |
PEX 3306 |
MUNICIPEX Protect |
ASTM F876/F877 |
||||
3/4" - 2" SDR 9 | |||||||
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
|||||||
Pipe* ^ +++ [G] |
PEX 3306 |
MUNICIPEX Protect |
AWWA C904 |
||||
3/4" - 2" SDR 9 | |||||||
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
|||||||
Pipe% * ^ ¢ § +++ [G] |
PEX |
MUNICIPEX Protect |
CSA B137.5 |
||||
3/4" - 2" SDR 9 | |||||||
% Tubing certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked, as applicable, with the following fitting system designation(s): ASTM F877, F1807, F1960, F2080 and F2159. * Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
|||||||
Pipe* ^ § +++ [G] |
PEX 3306 |
RAUPEX® Blue UV-Shield |
ASTM F876/F877 |
||||
3/8" - 2" SDR 9 | |||||||
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
|||||||
Pipe% * ^ ¢ § +++ [G] |
PEX |
RAUPEX® Blue UV-Shield |
CSA B137.5 |
||||
1/2" - 2" SDR 9 | |||||||
3/8" - 2" | |||||||
% Tubing certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked, as applicable, with the following fitting system designation(s): ASTM F877, F1807, F1960, F2080 and F2159. * Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
|||||||
Pipe* ^ § +++ [G] |
PEX 3306 |
RAUPEX® Red UV-Shield |
ASTM F876/F877 |
||||
3/8" - 2" SDR 9 | |||||||
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
|||||||
Pipe% * ^ ¢ § +++ [G] |
PEX |
RAUPEX® Red UV-Shield |
CSA B137.5 |
||||
1/2” - 2" SDR 9 | |||||||
3/8" - 2" | |||||||
% Tubing certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked, as applicable, with the following fitting system designation(s): ASTM F877, F1807, F1960, F2080 and F2159. * Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
|||||||
Pipe* ^ § +++ [G] |
PEX 3306 |
RAUPEX® White UV-Shield |
ASTM F876/F877 |
||||
3/8" - 2" SDR 9 | |||||||
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
|||||||
Pipe% * ^ ¢ § +++ [G] |
PEX |
RAUPEX® White UV-Shield |
CSA B137.5 |
||||
1/2” - 2" SDR 9 | |||||||
3/8" - 2" | |||||||
% Tubing certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked, as applicable, with the following fitting system designation(s): ASTM F877, F1807, F1960, F2080 and F2159. * Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
|||||||
Fittings¢ § |
PEX |
Rehau |
ASTM F877 |
||||
EVERLOC+Sleeves |
|||||||
3/8" (104815) | 1/2" (104816) | 5/8" (104817) | 3/4" (104818) | ||||
1" (104819) | 1 1/4" (104820) | 1 1/2" (104821) | 2" (104822) | ||||
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
|||||||
Fittings¢ § |
PEX |
Rehau |
CSA B137.5 |
||||
EVERLOC+Sleeves |
|||||||
3/8" (104815) | 1/2" (104816) | 5/8" (104817) | 3/4" (104818) | ||||
1" (104819) | 1 1/4" (104820) | 1 1/2" (104821) | 2" (104822) | ||||
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
& Tubing certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked, as applicable, with the following fitting system designation(s): AWWA C800. @ Product is exempted from bearing NSF-pw marking.
Product Type | Material Type | Trade Name | Product Standard | |||
PEX Pipe§ |
PEX 3306 |
MUNICIPEX Reclaim |
ASTM F876/F877 |
|||
1/2" - 2" | ||||||
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
||||||
PEX Pipe§ |
PEX 3306 |
MUNICIPEX Reclaim |
AWWA C904 |
|||
1/2" - 2" | ||||||
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
||||||
PEX Pipe% ¢ |
PEX |
MUNICIPEX Reclaim |
CSA B137.5 |
|||
1/2" - 2" | ||||||
% Tubing certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked, as applicable, with the following fitting system designation(s): AWWA C800. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. |
Product Type | Material Type | Trade Name | Product Standard | |||
Pipe |
PEX 3306 |
MUNICIPEX Force Main |
ASTM F876/F877 |
|||
1" - 2" SDR 9 | ||||||
Pipe% ¢ |
PEX 3306 |
MUNICIPEX Force Main |
CSA B137.5 |
|||
1" - 2" SDR 9 | ||||||
% Tubing certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked, as applicable, with the following fitting system designation(s): AWWA C800. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. |
||||||
Pipe |
PEX 3306 |
MUNICIPEX Force Main |
AWWA C904 |
|||
1" - 2" SDR 9 |
Product Type | Material Type | Trade Name | Product Standard | |||
Fittings¢ |
PEX |
REHAU® Raugeo |
CSA C448 |
|||
U-Bend |
||||||
1" | 2" | |||||
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. |
||||||
Pipe^ ¢ |
PEX |
REHAU® Raugeo |
CSA C448 |
|||
3/4" - 2" | ||||||
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. |
||||||
Pipe% ^ ¢ |
PEX |
REHAU® Raugeo |
CSA B137.5 |
|||
3/4" - 2" | ||||||
% Tubing certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked, as applicable, with the following fitting system designation(s): ASTM F877, F1807, F1960, F2080 and F2159. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. |
Product Type | Material Type | Trade Name | Product Standard | |||
Pipe$ * ^ § |
PEX 3006 |
RAUPEX® |
ASTM F876/F877 |
|||
3/8" - 2" SDR 9 | ||||||
$ Non-barrier pipe. * Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
||||||
Pipe$ % * § |
PEX |
RAUPEX® |
CSA B137.5 |
|||
3/8" - 2" SDR 9 | ||||||
$ Non-barrier pipe. % Tubing certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked, as applicable, with the following fitting system designation(s): ASTM F877, F1807, F1960, F2080 and F2159. * Accepted by NSF for use in residential and commercial construction, including manufactured housing. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
||||||
Pipe* ¥ |
PEX 0306 |
Raupex Black UV Shield |
ASTM F876/F877 |
|||
3/8" - 2" | ||||||
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. ¥ Product is Certified to the Uniform Mechanical Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Mechanical Code™. |
||||||
Pipe* ¥ |
PEX 0006 |
Raupex Black UV Shield |
ASTM F876/F877 |
|||
3/8" - 2" | ||||||
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. ¥ Product is Certified to the Uniform Mechanical Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Mechanical Code™. |
||||||
Pipe% * ¢ ¥ |
PEX |
Raupex Black UV Shield |
CSA B137.5 |
|||
3/8" - 2" | ||||||
% Tubing certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked, as applicable, with the following fitting system designation(s): ASTM F877, F1807, F1960, F2080 and F2159. * Accepted by NSF for use in residential and commercial construction, including manufactured housing. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. ¥ Product is Certified to the Uniform Mechanical Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Mechanical Code™. |
||||||
Pipe |
PEX 3206 |
RAUPEX O2 Barrier |
SE 1091 |
|||
10.1 mm x 1.1 mm |
Facility : # 11 Switzerland
Product Type | Material Type | Trade Name | Product Standard | |||
Pipe# * ^ § +++ [G] |
PEX 3306 |
Municipex PI |
ASTM F876/F877 |
|||
1" - 2" SDR 9 | ||||||
# Insulated material has not been evaluated to Standard 14 Requirements, only Standard 61. * Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Pipe# * ^ § +++ [G] |
PEX 3306 |
Municipex PI |
AWWA C904 |
|||
1" - 2" SDR 9 | ||||||
# Insulated material has not been evaluated to Standard 14 Requirements, only Standard 61. * Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Pipe# & * ^ ¢ § +++ [G] |
PEX |
Municipex PI |
CSA B137.5 |
|||
1" - 2" SDR 9 | ||||||
# Insulated material has not been evaluated to Standard 14 Requirements, only Standard 61. & Tubing certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked, as applicable, with the following fitting system designation(s): AWWA C800. * Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Pipe# % * ^ ¢ § +++ [G] |
PEX |
Insulpex Blue UV Shield |
CSA B137.5 |
|||
1" - 2" SDR 9 | ||||||
# Insulated material has not been evaluated to Standard 14 Requirements, only Standard 61. % Tubing certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked, as applicable, with the following fitting system designation(s): ASTM F877, F1807, F1960, F2080 and F2159. * Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Pipe# * ^ § +++ [G] |
PEX 3306 |
Insulpex Blue UV Shield |
ASTM F876/F877 |
|||
1" - 2" SDR 9 | ||||||
# Insulated material has not been evaluated to Standard 14 Requirements, only Standard 61. * Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Pipe# * ^ § +++ [G] |
PEX 3306 |
Insulpex Red UV Shield |
ASTM F876/F877 |
|||
1" - 2" SDR 9 | ||||||
# Insulated material has not been evaluated to Standard 14 Requirements, only Standard 61. * Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Pipe# % * ^ ¢ § +++ [G] |
PEX |
Insulpex Red UV Shield |
CSA B137.5 |
|||
1" - 2" SDR 9 | ||||||
# Insulated material has not been evaluated to Standard 14 Requirements, only Standard 61. % Tubing certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked, as applicable, with the following fitting system designation(s): ASTM F877, F1807, F1960, F2080 and F2159. * Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Pipe# * ^ § +++ [G] |
PEX 3306 |
Insulpex White UV Shield |
ASTM F876/F877 |
|||
1" - 2" SDR 9 | ||||||
# Insulated material has not been evaluated to Standard 14 Requirements, only Standard 61. * Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Pipe# % * ^ ¢ § +++ [G] |
PEX |
Insulpex White UV Shield |
CSA B137.5 |
|||
1" - 2" SDR 9 | ||||||
# Insulated material has not been evaluated to Standard 14 Requirements, only Standard 61. % Tubing certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked, as applicable, with the following fitting system designation(s): ASTM F877, F1807, F1960, F2080 and F2159. * Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
Facility : EU
Product Type | Material Type | Trade Name | Product Standard | |||
Tubing[1] [2] |
PEX |
NEOPEX O2 Barrier |
ASTM E84 |
|||
1/2", 5/8", 3/4" | ||||||
[1] Flame Spread Value (FSV) <= 25; Smoke Developed Value (SDV) <= 50. [2] 1/2", 5/8" 3/4" Flame Spread Index and Smoke Developed Index based on when tubing is field insulated with 1/2" Micro-lok HP Hi performance fiberglass insulation as per Rehau installation instructions. 1/2" Only: Flame Spread Index and Smoke Developed Index based on minimum spacing of 18 inches between tubing runs with Everloc+P, Everloc+ fittings. Tubing shall be marked [cNSF®-fs CAN/ULC S102.2 FS<=25/SD<=50]. |
||||||
Tubing[1] [3] |
PEX |
NEOPEX O2 Barrier |
CAN/ULC S102.2 |
|||
1/2", 5/8", 3/4" | ||||||
[1] Flame Spread Value (FSV) <= 25; Smoke Developed Value (SDV) <= 50. [3] 1/2" - Non-insulated 5/8" & 3/4": Flame Spread Index and Smoke Developed Index based on when tubing is field instructions. insulated with minimum 1/2" JM Microlok or Armaflex insulation as per Rehau installation. Tubing shall be marked [cNSF®-fs CAN/ULC S102.2 FS<=25/SD<=50]. |
Product Type | Material Type | Trade Name | Product Standard | |||
Pipe§ |
PEX 0306 |
NEOPEX O2 Barrier |
ASTM F876/F877 |
|||
3/8" - 2" SDR 9 | ||||||
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
||||||
Pipe% ¢ |
PEX 0306 |
NEOPEX O2 Barrier |
CSA B137.5 |
|||
3/8" - 2" SDR 9 | ||||||
% Tubing certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked, as applicable, with the following fitting system designation(s): ASTM F877, ASTM F1960 and ASTM F2080. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. |
Rehau Construction LLC | |
1501 Edwards Ferry Road | |
Leesburg, VA 20176 | |
United States | |
703-777-5255 |
Facility : # 5 USA
Product Type | Material Type | Trade Name | Product Standard | ||||
Fitting Components§ |
PEX |
Rehau |
ASTM F1960 |
||||
1/2" Ring [499702] | 3/4" Ring [499704] | 3/8" Ring [499701] | 5/8" Ring [499703] | ||||
1" Ring [499705] | 1 1/4" Ring [499706] | 1 1/2" Ring [499707] | 2" Ring [499708] | ||||
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
|||||||
Fitting Components¢ § |
PEX |
Rehau |
CSA B137.5 |
||||
1/2" Ring [499702] | 3/4" Ring [499704] | 3/8" Ring [499701] | 5/8" Ring [499703] | ||||
1" Ring [499705] | 1 1/4" Ring [499706] | 1 1/2" Ring [499707] | 2" Ring [499708] | ||||
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
REHAU Construction, LLC | |
1501 Edwards Ferry Road Northeast | |
Leesburg, VA 20176 | |
United States | |
703-779-4001 |
Facility : # 2 China
Product Type | Material Type | Trade Name | Product Standard | ||||
PEX Ring with Stop[1] |
PEX |
REHAU |
ASTM F1960 |
||||
PEX Reinforcing Ring, 1 1/2" 499707 | PEX Reinforcing Ring, 1 1/4" 499706 | PEX Reinforcing Ring, 1" 499705 | PEX Reinforcing Ring, 1/2" 499702 | ||||
PEX Reinforcing Ring, 2" 499708 | PEX Reinforcing Ring, 3/4" 499704 | PEX Reinforcing Ring, 3/8 in. 499701 | PEX Reinforcing Ring, 5/8" 499703 | ||||
[1] PEX rings are non-wetted components o fPEX fitting systems. |
|||||||
PEX Ring with Stop[1] |
PEX |
REHAU |
CSA B137.5 |
||||
PEX Reinforcing Ring, 1 1/2" 499707 | PEX Reinforcing Ring, 1 1/4" 499706 | PEX Reinforcing Ring, 1" 499705 | PEX Reinforcing Ring, 1/2" 499702 | ||||
PEX Reinforcing Ring, 2" 499708 | PEX Reinforcing Ring, 3/4" 499704 | PEX Reinforcing Ring, 3/8" 499701 | PEX Reinforcing Ring, 5/8" 499703 | ||||
[1] PEX rings are non-wetted components o fPEX fitting systems. |
Product Type | Material Type | Trade Name | Product Standard | ||||
PEX Ring with Stop[1] |
PEX |
REHAU |
ASTM F1960 |
||||
PEX Reinforcing Ring, 1 1/2" 499707 | PEX Reinforcing Ring, 1 1/4" 499706 | PEX Reinforcing Ring, 1" 499705 | PEX Reinforcing Ring, 1/2" 499702 | ||||
PEX Reinforcing Ring, 2" 499708 | PEX Reinforcing Ring, 3/4" 499704 | PEX Reinforcing Ring, 3/8" 499701 | PEX Reinforcing Ring, 5/8" 499703 | ||||
[1] PEX rings are non-wetted components of PEX fitting systems. |
|||||||
PEX Ring with Stop[1] |
PEX |
REHAU |
CSA B137.5 |
||||
PEX Reinforcing Ring, 1 1/2" 499707 | PEX Reinforcing Ring, 1 1/4" 499706 | PEX Reinforcing Ring, 1" 499705 | PEX Reinforcing Ring, 1/2" 499702 | ||||
PEX Reinforcing Ring, 2" 499708 | PEX Reinforcing Ring, 3/4" 499704 | PEX Reinforcing Ring, 3/8" 499701 | PEX Reinforcing Ring, 5/8" 499703 | ||||
[1] PEX rings are non-wetted components of PEX fitting systems. |
REHAU Construction, LLC | |
1501 Edwards Ferry Road NE | |
Leesburg, VA 20176 | |
United States | |
703-779-4001 | |
Visit this company's website |
Facility : Prey Nob District, Cambodia
Product Type | Material Type | Trade Name | Product Standard | ||||
Fittings[1] |
PEX |
REHAU |
ASTM F1960 |
||||
PEX Ring with stop |
|||||||
3/8" 499701-001 | 5/8" 499703-001 | 3/8" 499703-002 | 5/8" 499703-003 | ||||
1/2" 499702-004 | 3/4" 499704-001 | 1" 499705-001 | 1-1/4" 499706-001 | ||||
1-1/2" 499707-001 | 2" 499708-001 | ||||||
[1] PEX rings are non-wetted components of PEX fitting systems. |
|||||||
Fittings[1] |
PEX |
REHAU |
CSA B137.5 |
||||
PEX Ring with stop |
|||||||
3/8" 499701-001 | 5/8" 499703-001 | 3/8" 499703-002 | 5/8" 499703-003 | ||||
1/2" 499702-004 | 3/4" 499704-001 | 1" 499705-001 | 1-1/4" 499706-001 | ||||
1-1/2" 499707-001 | 2" 499708-001 | ||||||
[1] PEX rings are non-wetted components of PEX fitting systems. |
Product Type | Material Type | Trade Name | Product Standard | ||||
Fittings[1] |
PEX |
REHAU |
ASTM F1960 |
||||
PEX Ring with stop |
|||||||
3/8" 499701-001 | 5/8" 499703-001 | 3/8" 499703-002 | 5/8" 499703-003 | ||||
1/2" 499702-004 | 3/4" 499704-001 | 1" 499705-001 | 1-1/4" 499706-001 | ||||
1-1/2" 499707-001 | 2" 499708-001 | ||||||
[1] PEX rings are non-wetted components of PEX fitting systems. |
|||||||
Fittings[1] |
PEX |
REHAU |
CSA B137.5 |
||||
PEX Ring with stop |
|||||||
3/8" 499701-001 | 5/8" 499703-001 | 3/8" 499703-002 | 5/8" 499703-003 | ||||
1/2" 499702-004 | 3/4" 499704-001 | 1" 499705-001 | 1-1/4" 499706-001 | ||||
1-1/2" 499707-001 | 2" 499708-001 | ||||||
[1] PEX rings are non-wetted components of PEX fitting systems. |
Reliance Worldwide / Cash Acme | |
2400 7th Avenue Southwest | |
Cullman, AL 35055 | |
United States | |
877-700-4242 | |
256-775-8184 |
Facility : # 1 USA
Product Type | Material Type | Trade Name | Product Standard | |||
Pipe* ^ § +++ [G] |
PEX 3306 |
SharkBite 2XL |
ASTM F876/F877 |
|||
1 1/4" - 2" SDR 9 | ||||||
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Pipe* ^ ¢ § +++ [G] |
PEX |
SharkBite 2XL |
CSA B137.5 |
|||
1 1/4" - 2" | ||||||
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
Reliance Worldwide Corporation | |
2300 Defoor Hills Road NW | |
Atlanta, GA 30318 | |
United States | |
770-863-4000 | |
Visit this company's website |
Facility : # 1 Canada
Product Type | Material Type | Trade Name | Product Standard | |||
Tubing$ ? @ ^ ~ § +++ [G] |
PEX 5306 |
Sharkbite® |
ASTM F876/F877 |
|||
1/4" - 2" SDR 9 | ||||||
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic radiant heating system made in accordance with the current version of the ASTM F877 standard intended for a maximum 100 psi water service and a maximum working temperature of 180°F. System components consist of tubing and/or fittings. To be installed in accordance with manufacturer’s instructions and the latest edition of the Uniform Plumbing Code™. ? The UV material type 5306 is only applicable to the red, white and blue pipe. @ Certified for solid wall red, blue, or white tubing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ~ Accepted by NSF for use in residential and commercial construction, including manufactured housing. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Tubing? @ ^ ~ § +++ [G] |
PEX 5306 |
Sharkbite® |
AWWA C904 |
|||
1/2" - 2" SDR 9 | ||||||
? The UV material type 5306 is only applicable to the red, white and blue pipe. @ Certified for solid wall red, blue, or white tubing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ~ Accepted by NSF for use in residential and commercial construction, including manufactured housing. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Tubing$ ? @ ^ ~ ¢ § +++ [1] [G] |
PEX 5306 |
Sharkbite® |
CSA B137.5 |
|||
1/4" - 2" SDR 9 | ||||||
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic radiant heating system made in accordance with the current version of the ASTM F877 standard intended for a maximum 100 psi water service and a maximum working temperature of 180°F. System components consist of tubing and/or fittings. To be installed in accordance with manufacturer’s instructions and the latest edition of the Uniform Plumbing Code™. ? The UV material type 5306 is only applicable to the red, white and blue pipe. @ Certified for solid wall red, blue, or white tubing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ~ Accepted by NSF for use in residential and commercial construction, including manufactured housing. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [1] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked, as applicable, with the following fitting system designation(s): ASTM F1807, ASTM F2159, ASSE 1061. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
Product Type | Material Type | Trade Name | Product Standard | |||
Tubing! $ % ^ ~ § |
PEX 5006 |
SharkBite® |
ASTM F876/F877 |
|||
1/4" – 2" SDR 9 | ||||||
! Orange, natural, red, and teal green. $ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic radiant heating system made in accordance with the current version of the ASTM F877 standard intended for a maximum 100 psi water service and a maximum working temperature of 180°F. System components consist of tubing and/or fittings. To be installed in of 180°F. System components consist of tubing and/or fittings. To be installed in accordance with manufacturer’s instructions and the latest edition of the Uniform Plumbing Code™. % This product is barrier tubing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ~ Accepted by NSF for use in residential and commercial construction, including manufactured housing. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
||||||
Tubing! $ % ^ ~ ¢ § [1] |
PEX 5006 |
SharkBite® |
CSA B137.5 |
|||
1/4" – 2" SDR 9 | ||||||
! Orange, natural, red, and teal green. $ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic radiant heating system made in accordance with the current version of the ASTM F877 standard intended for a maximum 100 psi water service and a maximum working temperature of 180°F. System components consist of tubing and/or fittings. To be installed in of 180°F. System components consist of tubing and/or fittings. To be installed in accordance with manufacturer’s instructions and the latest edition of the Uniform Plumbing Code™. % This product is barrier tubing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ~ Accepted by NSF for use in residential and commercial construction, including manufactured housing. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [1] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked, as applicable, with the following fitting system designation(s): ASTM F1807, ASTM F2159, ASSE 1061. |
Reliance Worldwide Corporation | |
2300 Defoor Hills | |
Atlanta, GA 30318 | |
United States | |
877-800-4242 | |
Visit this company's website |
Facility : # 1 China
Product Type | Material Type | Trade Name | Product Standard | ||||
Fittings* [1] |
PEX |
SharkBite |
ASTM F1960 |
||||
RIFENG PEX Ring with Stop 3/8" - 2" |
|||||||
UA23102 | UA23102A25 | UA23102CA25 | UA23102Z25 | ||||
UA23103 | UA23103A25 | UA23103CA25 | UA23103Z25 | ||||
UA23104 | UA23104A25 | UA23104Z25 | |||||
* Model numbers listed are base part numbers. Saleable items may include an additional 1-8 alpha/numeric characters after the base part number that indicated specific packaging configurations only. [1] This is a PEX sleeve certified to ASTM F1960 & CSA B137.5. This is a non wetted product. |
|||||||
Fittings* [1] |
PEX |
SharkBite |
CSA B137.5 |
||||
RIFENG PEX Ring with Stop 3/8" - 2" |
|||||||
UA23102 | UA23102A25 | UA23102CA25 | UA23102Z25 | ||||
UA23103 | UA23103A25 | UA23103CA25 | UA23103Z25 | ||||
UA23104 | UA23104A25 | UA23104Z25 | |||||
* Model numbers listed are base part numbers. Saleable items may include an additional 1-8 alpha/numeric characters after the base part number that indicated specific packaging configurations only. [1] This is a PEX sleeve certified to ASTM F1960 & CSA B137.5. This is a non wetted product. |
Product Type | Material Type | Trade Name | Product Standard | ||||
Fittings* [1] |
PEX |
SharkBite |
ASTM F1960 |
||||
RIFENG PEX Ring with Stop 3/8" - 2" |
|||||||
UA23102 | UA23102A25 | UA23102CA25 | UA23102Z25 | ||||
UA23103 | UA23103A25 | UA23103CA25 | UA23103Z25 | ||||
UA23104 | UA23104A25 | UA23104Z25 | |||||
* Model numbers listed are base part numbers. Saleable items may include an additional 1-8 alpha/numeric characters after the base part number that indicated specific packaging configurations only. [1] This is a PEX sleeve certified to ASTM F1960 & CSA B137.5. This is a non wetted product. |
|||||||
Fittings* [1] |
PEX |
SharkBite |
CSA B137.5 |
||||
RIFENG PEX Ring with Stop 3/8" - 2" |
|||||||
UA23102 | UA23102A25 | UA23102CA25 | UA23102Z25 | ||||
UA23103 | UA23103A25 | UA23103CA25 | UA23103Z25 | ||||
UA23104 | UA23104A25 | UA23104Z25 | |||||
* Model numbers listed are base part numbers. Saleable items may include an additional 1-8 alpha/numeric characters after the base part number that indicated specific packaging configurations only. [1] This is a PEX sleeve certified to ASTM F1960 & CSA B137.5. This is a non wetted product. |
Reliance Worldwide Corporation | |
2300 Defoor Hills NW | |
Atlanta, GA 30318 | |
United States | |
770-863-4000 | |
Visit this company's website |
Facility : # 1 Cambodia
Product Type | Material Type | Trade Name | Product Standard | ||||
Fittings[1] |
PEX |
Reliance Worldwide Corporation |
ASTM F1960 |
||||
PEX Ring with stop |
|||||||
UA23102 1/2" | UA23102Z25 1/2" | UA23103 3/4" | UA23103Z25 3/4" | ||||
UA23104 1" | UA23104Z25 1" | UA24676 1-1/4" | UA24677 1-1/2" | ||||
UA24678 2" | |||||||
[1] PEX rings are non-wetted components of PEX fitting systems. |
|||||||
Fittings[1] |
PEX |
Reliance Worldwide Corporation |
CSA B137.5 |
||||
PEX Ring with stop |
|||||||
UA23102 1/2" | UA23102Z25 1/2" | UA23103 3/4" | UA23103Z25 3/4" | ||||
UA23104 1" | UA23104Z25 1" | UA24676 1-1/4" | UA24677 1-1/2" | ||||
UA24678 2" | |||||||
[1] PEX rings are non-wetted components of PEX fitting systems. |
|||||||
Pipe! § +++ [G] |
PEX 5306 |
Reliance Worldwide Corporation |
ASTM F876/F877 |
||||
U860W25 PEXTUBE 1/2" WHITE 25' COIL | |||||||
U860W50 PEXTUBE 1/2" WHITE 50' COIL | |||||||
U860W100 PEXTUBE 1/2" WHITE 100' COIL | |||||||
U860W300 PEXTUBE 1/2" WHITE 300' COIL | |||||||
U860W500 PEXTUBE 1/2" WHITE 500' COIL | |||||||
U870W25 PEXTUBE 3/4" WHITE 25' COIL | |||||||
U870W50 PEXTUBE 3/4" WHITE 50' COIL | |||||||
U870W100 PEXTUBE 3/4" WHITE 100' COIL | |||||||
U870W300 PEXTUBE 3/4" WHITE 300' COIL | |||||||
U870W500 PEXTUBE 3/4" WHITE 500' COIL | |||||||
U880W100 PEXTUBE 1" WHITE 100' COIL | |||||||
U880W300 PEXTUBE 1" WHITE 300' COIL | |||||||
U880W500 PEXTUBE 1" WHITE 500' COIL | |||||||
U885W100 PEXTUBE 1-1/4" WHITE 100' COIL | |||||||
U890W100 PEXTUBE 1-1/2" WHITE 100' COIL | |||||||
U895W100 PEXTUBE 2" WHITE 100' COIL | |||||||
U860R25 PEXTUBE 1/2" RED 25' COIL | |||||||
U860R50 PEXTUBE 1/2" RED 50' COIL | |||||||
U860R100 PEXTUBE 1/2" RED 100' COIL | |||||||
U860R300 PEXTUBE 1/2" RED 300' COIL | |||||||
U860R500 PEXTUBE 1/2" RED 500' COIL | |||||||
U870R25 PEXTUBE 3/4" RED 25' COIL | |||||||
U870R50 PEXTUBE 3/4" RED 50' COIL | |||||||
U870R100 PEXTUBE 3/4" RED 100' COIL | |||||||
U870R300 PEXTUBE 3/4" RED 300' COIL | |||||||
U870R500 PEXTUBE 3/4" RED 500' COIL | |||||||
U880R100 PEXTUBE 1" RED 100' COIL | |||||||
U880R300 PEXTUBE 1" RED 300' COIL | |||||||
U880R500 PEXTUBE 1" RED 500' COIL | |||||||
U860B25 PEXTUBE 1/2" BLUE 25' COIL | |||||||
U860B50 PEXTUBE 1/2" BLUE 50' COIL | |||||||
U860B100 PEXTUBE 1/2" BLUE 100' COIL | |||||||
U860B300 PEXTUBE 1/2" BLUE 300' COIL | |||||||
U860B500 PEXTUBE 1/2" BLUE 500' COIL | |||||||
U870B25 PEXTUBE 3/4" BLUE 25' COIL | |||||||
U870B50 PEXTUBE 3/4" BLUE 50' COIL | |||||||
U870B100 PEXTUBE 3/4" BLUE 100' COIL | |||||||
U870B300 PEXTUBE 3/4" BLUE 300' COIL | |||||||
U870B500 PEXTUBE 3/4" BLUE 500' COIL | |||||||
U880B100 PEXTUBE 1" BLUE 100' COIL | |||||||
U880B300 PEXTUBE 1" BLUE 300' COIL | |||||||
U880B500 PEXTUBE 1" BLUE 500' COIL | |||||||
U860W5 PEXTUBE 1/2" WHITE 5' STICK | |||||||
U860W10 PEXTUBE 1/2" WHITE 10' STICK | |||||||
U860W20 PEXTUBE 1/2" WHITE 20' STICK | |||||||
U870W5 PEXTUBE 3/4" WHITE 5' STICK | |||||||
U870W10 PEXTUBE 3/4" WHITE 10' STICK | |||||||
U870W20 PEXTUBE 3/4" WHITE 20' STICK | |||||||
U880W5 PEXTUBE 1" WHITE 5' STICK | |||||||
U880W10 PEXTUBE 1" WHITE 10' STICK | |||||||
U880W20 PEXTUBE 1" WHITE 20' STICK | |||||||
U885W20 PEXTUBE 1-1/4" WHITE 20' STICK | |||||||
U890W20 PEXTUBE 1-1/2" WHITE 20' STICK | |||||||
U895W20 PEXTUBE 2" WHITE 20' STICK | |||||||
U860R5 PEXTUBE 1/2" RED 5' STICK | |||||||
U860R10 PEXTUBE 1/2" RED 10' STICK | |||||||
U860R20 PEXTUBE 1/2" RED 20' STICK | |||||||
U870R5 PEXTUBE 3/4" RED 5' STICK | |||||||
U870R10 PEXTUBE 3/4" RED 10' STICK | |||||||
U870R20 PEXTUBE 3/4" RED 20' STICK | |||||||
U880R5 PEXTUBE 1" RED 5' STICK | |||||||
U880R10 PEXTUBE 1" RED 10' STICK | |||||||
U880R20 PEXTUBE 1" RED 20' STICK | |||||||
U860B5 PEXTUBE 1/2" BLUE 5' STICK | |||||||
U860B10 PEXTUBE 1/2" BLUE 10' STICK | |||||||
U860B20 PEXTUBE 1/2" BLUE 20' STICK | |||||||
U870B5 PEXTUBE 3/4" BLUE 5' STICK | |||||||
U870B10 PEXTUBE 3/4" BLUE 10' STICK | |||||||
U870B20 PEXTUBE 3/4" BLUE 20' STICK | |||||||
U880B5 PEXTUBE 1" BLUE 5' STICK | |||||||
U880B10 PEXTUBE 1" BLUE 10' STICK | |||||||
U880B20 PEXTUBE 1" BLUE 20' STICK | |||||||
! Certified for natural, red, white and blue without oxygen barrier. Natural-PEX 5006; red, white, blue- PEX 5306 § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
|||||||
Tubing! ¢ § +++ [2] [G] |
PEX 5306 |
Reliance Worldwide Corporation |
CSA B137.5 |
||||
U860W25 PEXTUBE 1/2" WHITE 25' COIL | |||||||
U860W50 PEXTUBE 1/2" WHITE 50' COIL | |||||||
U860W100 PEXTUBE 1/2" WHITE 100' COIL | |||||||
U860W300 PEXTUBE 1/2" WHITE 300' COIL | |||||||
U860W500 PEXTUBE 1/2" WHITE 500' COIL | |||||||
U870W25 PEXTUBE 3/4" WHITE 25' COIL | |||||||
U870W50 PEXTUBE 3/4" WHITE 50' COIL | |||||||
U870W100 PEXTUBE 3/4" WHITE 100' COIL | |||||||
U870W300 PEXTUBE 3/4" WHITE 300' COIL | |||||||
U870W500 PEXTUBE 3/4" WHITE 500' COIL | |||||||
U880W100 PEXTUBE 1" WHITE 100' COIL | |||||||
U880W300 PEXTUBE 1" WHITE 300' COIL | |||||||
U880W500 PEXTUBE 1" WHITE 500' COIL | |||||||
U885W100 PEXTUBE 1-1/4" WHITE 100' COIL | |||||||
U890W100 PEXTUBE 1-1/2" WHITE 100' COIL | |||||||
U895W100 PEXTUBE 2" WHITE 100' COIL | |||||||
U860R25 PEXTUBE 1/2" RED 25' COIL | |||||||
U860R50 PEXTUBE 1/2" RED 50' COIL | |||||||
U860R100 PEXTUBE 1/2" RED 100' COIL | |||||||
U860R300 PEXTUBE 1/2" RED 300' COIL | |||||||
U860R500 PEXTUBE 1/2" RED 500' COIL | |||||||
U870R25 PEXTUBE 3/4" RED 25' COIL | |||||||
U870R50 PEXTUBE 3/4" RED 50' COIL | |||||||
U870R100 PEXTUBE 3/4" RED 100' COIL | |||||||
U870R300 PEXTUBE 3/4" RED 300' COIL | |||||||
U870R500 PEXTUBE 3/4" RED 500' COIL | |||||||
U880R100 PEXTUBE 1" RED 100' COIL | |||||||
U880R300 PEXTUBE 1" RED 300' COIL | |||||||
U880R500 PEXTUBE 1" RED 500' COIL | |||||||
U860B25 PEXTUBE 1/2" BLUE 25' COIL | |||||||
U860B50 PEXTUBE 1/2" BLUE 50' COIL | |||||||
U860B100 PEXTUBE 1/2" BLUE 100' COIL | |||||||
U860B300 PEXTUBE 1/2" BLUE 300' COIL | |||||||
U860B500 PEXTUBE 1/2" BLUE 500' COIL | |||||||
U870B25 PEXTUBE 3/4" BLUE 25' COIL | |||||||
U870B50 PEXTUBE 3/4" BLUE 50' COIL | |||||||
U870B100 PEXTUBE 3/4" BLUE 100' COIL | |||||||
U870B300 PEXTUBE 3/4" BLUE 300' COIL | |||||||
U870B500 PEXTUBE 3/4" BLUE 500' COIL | |||||||
U880B100 PEXTUBE 1" BLUE 100' COIL | |||||||
U880B300 PEXTUBE 1" BLUE 300' COIL | |||||||
U880B500 PEXTUBE 1" BLUE 500' COIL | |||||||
U860W5 PEXTUBE 1/2" WHITE 5' STICK | |||||||
U860W10 PEXTUBE 1/2" WHITE 10' STICK | |||||||
U860W20 PEXTUBE 1/2" WHITE 20' STICK | |||||||
U870W5 PEXTUBE 3/4" WHITE 5' STICK | |||||||
U870W10 PEXTUBE 3/4" WHITE 10' STICK | |||||||
U870W20 PEXTUBE 3/4" WHITE 20' STICK | |||||||
U880W5 PEXTUBE 1" WHITE 5' STICK | |||||||
U880W10 PEXTUBE 1" WHITE 10' STICK | |||||||
U880W20 PEXTUBE 1" WHITE 20' STICK | |||||||
U885W20 PEXTUBE 1-1/4" WHITE 20' STICK | |||||||
U890W20 PEXTUBE 1-1/2" WHITE 20' STICK | |||||||
U895W20 PEXTUBE 2" WHITE 20' STICK | |||||||
U860R5 PEXTUBE 1/2" RED 5' STICK | |||||||
U860R10 PEXTUBE 1/2" RED 10' STICK | |||||||
U860R20 PEXTUBE 1/2" RED 20' STICK | |||||||
U870R5 PEXTUBE 3/4" RED 5' STICK | |||||||
U870R10 PEXTUBE 3/4" RED 10' STICK | |||||||
U870R20 PEXTUBE 3/4" RED 20' STICK | |||||||
U880R5 PEXTUBE 1" RED 5' STICK | |||||||
U880R10 PEXTUBE 1" RED 10' STICK | |||||||
U880R20 PEXTUBE 1" RED 20' STICK | |||||||
U860B5 PEXTUBE 1/2" BLUE 5' STICK | |||||||
U860B10 PEXTUBE 1/2" BLUE 10' STICK | |||||||
U860B20 PEXTUBE 1/2" BLUE 20' STICK | |||||||
U870B5 PEXTUBE 3/4" BLUE 5' STICK | |||||||
U870B10 PEXTUBE 3/4" BLUE 10' STICK | |||||||
U870B20 PEXTUBE 3/4" BLUE 20' STICK | |||||||
U880B5 PEXTUBE 1" BLUE 5' STICK | |||||||
U880B10 PEXTUBE 1" BLUE 10' STICK | |||||||
U880B20 PEXTUBE 1" BLUE 20' STICK | |||||||
! Certified for natural, red, white and blue without oxygen barrier. Natural-PEX 5006; red, white, blue- PEX 5306 ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [2] Pipe Certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked with the following fitting system designations: ASTM F1807, ASTM F2159. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
Product Type | Material Type | Trade Name | Product Standard | ||||
Fittings[1] |
PEX |
Reliance Worldwide Corporation |
ASTM F1960 |
||||
PEX Ring with stop |
|||||||
UA23102 1/2" | UA23102Z25 1/2" | UA23103 3/4" | UA23103Z25 3/4" | ||||
UA23104 1" | UA23104Z25 1" | UA24676 1-1/4" | UA24677 1-1/2" | ||||
UA24678 2" | |||||||
[1] PEX rings are non-wetted components of PEX fitting systems. |
|||||||
Fittings[1] |
PEX |
Reliance Worldwide Corporation |
CSA B137.5 |
||||
PEX Ring with stop |
|||||||
UA23102 1/2" | UA23102Z25 1/2" | UA23103 3/4" | UA23103Z25 3/4" | ||||
UA23104 1" | UA23104Z25 1" | UA24676 1-1/4" | UA24677 1-1/2" | ||||
UA24678 2" | |||||||
[1] PEX rings are non-wetted components of PEX fitting systems. |
|||||||
Pipe! § +++ [G] |
PEX 5306 |
Reliance Worldwide Corporation |
ASTM F876/F877 |
||||
U860W25 PEXTUBE 1/2" WHITE 25' COIL | |||||||
U860W50 PEXTUBE 1/2" WHITE 50' COIL | |||||||
U860W100 PEXTUBE 1/2" WHITE 100' COIL | |||||||
U860W300 PEXTUBE 1/2" WHITE 300' COIL | |||||||
U860W500 PEXTUBE 1/2" WHITE 500' COIL | |||||||
U870W25 PEXTUBE 3/4" WHITE 25' COIL | |||||||
U870W50 PEXTUBE 3/4" WHITE 50' COIL | |||||||
U870W100 PEXTUBE 3/4" WHITE 100' COIL | |||||||
U870W300 PEXTUBE 3/4" WHITE 300' COIL | |||||||
U870W500 PEXTUBE 3/4" WHITE 500' COIL | |||||||
U880W100 PEXTUBE 1" WHITE 100' COIL | |||||||
U880W300 PEXTUBE 1" WHITE 300' COIL | |||||||
U880W500 PEXTUBE 1" WHITE 500' COIL | |||||||
U885W100 PEXTUBE 1-1/4" WHITE 100' COIL | |||||||
U890W100 PEXTUBE 1-1/2" WHITE 100' COIL | |||||||
U895W100 PEXTUBE 2" WHITE 100' COIL | |||||||
U860R25 PEXTUBE 1/2" RED 25' COIL | |||||||
U860R50 PEXTUBE 1/2" RED 50' COIL | |||||||
U860R100 PEXTUBE 1/2" RED 100' COIL | |||||||
U860R300 PEXTUBE 1/2" RED 300' COIL | |||||||
U860R500 PEXTUBE 1/2" RED 500' COIL | |||||||
U870R25 PEXTUBE 3/4" RED 25' COIL | |||||||
U870R50 PEXTUBE 3/4" RED 50' COIL | |||||||
U870R100 PEXTUBE 3/4" RED 100' COIL | |||||||
U870R300 PEXTUBE 3/4" RED 300' COIL | |||||||
U870R500 PEXTUBE 3/4" RED 500' COIL | |||||||
U880R100 PEXTUBE 1" RED 100' COIL | |||||||
U880R300 PEXTUBE 1" RED 300' COIL | |||||||
U880R500 PEXTUBE 1" RED 500' COIL | |||||||
U860B25 PEXTUBE 1/2" BLUE 25' COIL | |||||||
U860B50 PEXTUBE 1/2" BLUE 50' COIL | |||||||
U860B100 PEXTUBE 1/2" BLUE 100' COIL | |||||||
U860B300 PEXTUBE 1/2" BLUE 300' COIL | |||||||
U860B500 PEXTUBE 1/2" BLUE 500' COIL | |||||||
U870B25 PEXTUBE 3/4" BLUE 25' COIL | |||||||
U870B50 PEXTUBE 3/4" BLUE 50' COIL | |||||||
U870B100 PEXTUBE 3/4" BLUE 100' COIL | |||||||
U870B300 PEXTUBE 3/4" BLUE 300' COIL | |||||||
U870B500 PEXTUBE 3/4" BLUE 500' COIL | |||||||
U880B100 PEXTUBE 1" BLUE 100' COIL | |||||||
U880B300 PEXTUBE 1" BLUE 300' COIL | |||||||
U880B500 PEXTUBE 1" BLUE 500' COIL | |||||||
U860W5 PEXTUBE 1/2" WHITE 5' STICK | |||||||
U860W10 PEXTUBE 1/2" WHITE 10' STICK | |||||||
U860W20 PEXTUBE 1/2" WHITE 20' STICK | |||||||
U870W5 PEXTUBE 3/4" WHITE 5' STICK | |||||||
U870W10 PEXTUBE 3/4" WHITE 10' STICK | |||||||
U870W20 PEXTUBE 3/4" WHITE 20' STICK | |||||||
U880W5 PEXTUBE 1" WHITE 5' STICK | |||||||
U880W10 PEXTUBE 1" WHITE 10' STICK | |||||||
U880W20 PEXTUBE 1" WHITE 20' STICK | |||||||
U885W20 PEXTUBE 1-1/4" WHITE 20' STICK | |||||||
U890W20 PEXTUBE 1-1/2" WHITE 20' STICK | |||||||
U895W20 PEXTUBE 2" WHITE 20' STICK | |||||||
U860R5 PEXTUBE 1/2" RED 5' STICK | |||||||
U860R10 PEXTUBE 1/2" RED 10' STICK | |||||||
U860R20 PEXTUBE 1/2" RED 20' STICK | |||||||
U870R5 PEXTUBE 3/4" RED 5' STICK | |||||||
U870R10 PEXTUBE 3/4" RED 10' STICK | |||||||
U870R20 PEXTUBE 3/4" RED 20' STICK | |||||||
U880R5 PEXTUBE 1" RED 5' STICK | |||||||
U880R10 PEXTUBE 1" RED 10' STICK | |||||||
U880R20 PEXTUBE 1" RED 20' STICK | |||||||
U860B5 PEXTUBE 1/2" BLUE 5' STICK | |||||||
U860B10 PEXTUBE 1/2" BLUE 10' STICK | |||||||
U860B20 PEXTUBE 1/2" BLUE 20' STICK | |||||||
U870B5 PEXTUBE 3/4" BLUE 5' STICK | |||||||
U870B10 PEXTUBE 3/4" BLUE 10' STICK | |||||||
U870B20 PEXTUBE 3/4" BLUE 20' STICK | |||||||
U880B5 PEXTUBE 1" BLUE 5' STICK | |||||||
U880B10 PEXTUBE 1" BLUE 10' STICK | |||||||
U880B20 PEXTUBE 1" BLUE 20' STICK | |||||||
! Certified for natural, red, white and blue without oxygen barrier. Natural-PEX 5006; red, white, blue- PEX 5306 § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
|||||||
Tubing! ¢ § +++ [2] [G] |
PEX 5306 |
Reliance Worldwide Corporation |
CSA B137.5 |
||||
U860W25 PEXTUBE 1/2" WHITE 25' COIL | |||||||
U860W50 PEXTUBE 1/2" WHITE 50' COIL | |||||||
U860W100 PEXTUBE 1/2" WHITE 100' COIL | |||||||
U860W300 PEXTUBE 1/2" WHITE 300' COIL | |||||||
U860W500 PEXTUBE 1/2" WHITE 500' COIL | |||||||
U870W25 PEXTUBE 3/4" WHITE 25' COIL | |||||||
U870W50 PEXTUBE 3/4" WHITE 50' COIL | |||||||
U870W100 PEXTUBE 3/4" WHITE 100' COIL | |||||||
U870W300 PEXTUBE 3/4" WHITE 300' COIL | |||||||
U870W500 PEXTUBE 3/4" WHITE 500' COIL | |||||||
U880W100 PEXTUBE 1" WHITE 100' COIL | |||||||
U880W300 PEXTUBE 1" WHITE 300' COIL | |||||||
U880W500 PEXTUBE 1" WHITE 500' COIL | |||||||
U885W100 PEXTUBE 1-1/4" WHITE 100' COIL | |||||||
U890W100 PEXTUBE 1-1/2" WHITE 100' COIL | |||||||
U895W100 PEXTUBE 2" WHITE 100' COIL | |||||||
U860R25 PEXTUBE 1/2" RED 25' COIL | |||||||
U860R50 PEXTUBE 1/2" RED 50' COIL | |||||||
U860R100 PEXTUBE 1/2" RED 100' COIL | |||||||
U860R300 PEXTUBE 1/2" RED 300' COIL | |||||||
U860R500 PEXTUBE 1/2" RED 500' COIL | |||||||
U870R25 PEXTUBE 3/4" RED 25' COIL | |||||||
U870R50 PEXTUBE 3/4" RED 50' COIL | |||||||
U870R100 PEXTUBE 3/4" RED 100' COIL | |||||||
U870R300 PEXTUBE 3/4" RED 300' COIL | |||||||
U870R500 PEXTUBE 3/4" RED 500' COIL | |||||||
U880R100 PEXTUBE 1" RED 100' COIL | |||||||
U880R300 PEXTUBE 1" RED 300' COIL | |||||||
U880R500 PEXTUBE 1" RED 500' COIL | |||||||
U860B25 PEXTUBE 1/2" BLUE 25' COIL | |||||||
U860B50 PEXTUBE 1/2" BLUE 50' COIL | |||||||
U860B100 PEXTUBE 1/2" BLUE 100' COIL | |||||||
U860B300 PEXTUBE 1/2" BLUE 300' COIL | |||||||
U860B500 PEXTUBE 1/2" BLUE 500' COIL | |||||||
U870B25 PEXTUBE 3/4" BLUE 25' COIL | |||||||
U870B50 PEXTUBE 3/4" BLUE 50' COIL | |||||||
U870B100 PEXTUBE 3/4" BLUE 100' COIL | |||||||
U870B300 PEXTUBE 3/4" BLUE 300' COIL | |||||||
U870B500 PEXTUBE 3/4" BLUE 500' COIL | |||||||
U880B100 PEXTUBE 1" BLUE 100' COIL | |||||||
U880B300 PEXTUBE 1" BLUE 300' COIL | |||||||
U880B500 PEXTUBE 1" BLUE 500' COIL | |||||||
U860W5 PEXTUBE 1/2" WHITE 5' STICK | |||||||
U860W10 PEXTUBE 1/2" WHITE 10' STICK | |||||||
U860W20 PEXTUBE 1/2" WHITE 20' STICK | |||||||
U870W5 PEXTUBE 3/4" WHITE 5' STICK | |||||||
U870W10 PEXTUBE 3/4" WHITE 10' STICK | |||||||
U870W20 PEXTUBE 3/4" WHITE 20' STICK | |||||||
U880W5 PEXTUBE 1" WHITE 5' STICK | |||||||
U880W10 PEXTUBE 1" WHITE 10' STICK | |||||||
U880W20 PEXTUBE 1" WHITE 20' STICK | |||||||
U885W20 PEXTUBE 1-1/4" WHITE 20' STICK | |||||||
U890W20 PEXTUBE 1-1/2" WHITE 20' STICK | |||||||
U895W20 PEXTUBE 2" WHITE 20' STICK | |||||||
U860R5 PEXTUBE 1/2" RED 5' STICK | |||||||
U860R10 PEXTUBE 1/2" RED 10' STICK | |||||||
U860R20 PEXTUBE 1/2" RED 20' STICK | |||||||
U870R5 PEXTUBE 3/4" RED 5' STICK | |||||||
U870R10 PEXTUBE 3/4" RED 10' STICK | |||||||
U870R20 PEXTUBE 3/4" RED 20' STICK | |||||||
U880R5 PEXTUBE 1" RED 5' STICK | |||||||
U880R10 PEXTUBE 1" RED 10' STICK | |||||||
U880R20 PEXTUBE 1" RED 20' STICK | |||||||
U860B5 PEXTUBE 1/2" BLUE 5' STICK | |||||||
U860B10 PEXTUBE 1/2" BLUE 10' STICK | |||||||
U860B20 PEXTUBE 1/2" BLUE 20' STICK | |||||||
U870B5 PEXTUBE 3/4" BLUE 5' STICK | |||||||
U870B10 PEXTUBE 3/4" BLUE 10' STICK | |||||||
U870B20 PEXTUBE 3/4" BLUE 20' STICK | |||||||
U880B5 PEXTUBE 1" BLUE 5' STICK | |||||||
U880B10 PEXTUBE 1" BLUE 10' STICK | |||||||
U880B20 PEXTUBE 1" BLUE 20' STICK | |||||||
! Certified for natural, red, white and blue without oxygen barrier. Natural-PEX 5006; red, white, blue- PEX 5306 ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [2] Pipe Certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked with the following fitting system designations: ASTM F1807, ASTM F2159. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
|||||||
Pipe§ +++ [3] [G] |
PEX 5306 |
Reliance Worldwide Corporation |
ASTM F876/877 |
||||
U860W25 PEXTUBE 1/2" WHITE 25' COIL | |||||||
U860W50 PEXTUBE 1/2" WHITE 50' COIL | |||||||
U860W100 PEXTUBE 1/2" WHITE 100' COIL | |||||||
U860W300 PEXTUBE 1/2" WHITE 300' COIL | |||||||
U860W500 PEXTUBE 1/2" WHITE 500' COIL | |||||||
U870W25 PEXTUBE 3/4" WHITE 25' COIL | |||||||
U870W50 PEXTUBE 3/4" WHITE 50' COIL | |||||||
U870W100 PEXTUBE 3/4" WHITE 100' COIL | |||||||
U870W300 PEXTUBE 3/4" WHITE 300' COIL | |||||||
U870W500 PEXTUBE 3/4" WHITE 500' COIL | |||||||
U880W100 PEXTUBE 1" WHITE 100' COIL | |||||||
U880W300 PEXTUBE 1" WHITE 300' COIL | |||||||
U880W500 PEXTUBE 1" WHITE 500' COIL | |||||||
U885W100 PEXTUBE 1-1/4" WHITE 100' COIL | |||||||
U890W100 PEXTUBE 1-1/2" WHITE 100' COIL | |||||||
U895W100 PEXTUBE 2" WHITE 100' COIL | |||||||
U860R25 PEXTUBE 1/2" RED 25' COIL | |||||||
U860R50 PEXTUBE 1/2" RED 50' COIL | |||||||
U860R100 PEXTUBE 1/2" RED 100' COIL | |||||||
U860R300 PEXTUBE 1/2" RED 300' COIL | |||||||
U860R500 PEXTUBE 1/2" RED 500' COIL | |||||||
U870R25 PEXTUBE 3/4" RED 25' COIL | |||||||
U870R50 PEXTUBE 3/4" RED 50' COIL | |||||||
U870R100 PEXTUBE 3/4" RED 100' COIL | |||||||
U870R300 PEXTUBE 3/4" RED 300' COIL | |||||||
U870R500 PEXTUBE 3/4" RED 500' COIL | |||||||
U880R100 PEXTUBE 1" RED 100' COIL | |||||||
U880R300 PEXTUBE 1" RED 300' COIL | |||||||
U880R500 PEXTUBE 1" RED 500' COIL | |||||||
U860B25 PEXTUBE 1/2" BLUE 25' COIL | |||||||
U860B50 PEXTUBE 1/2" BLUE 50' COIL | |||||||
U860B100 PEXTUBE 1/2" BLUE 100' COIL | |||||||
U860B300 PEXTUBE 1/2" BLUE 300' COIL | |||||||
U860B500 PEXTUBE 1/2" BLUE 500' COIL | |||||||
U870B25 PEXTUBE 3/4" BLUE 25' COIL | |||||||
U870B50 PEXTUBE 3/4" BLUE 50' COIL | |||||||
U870B100 PEXTUBE 3/4" BLUE 100' COIL | |||||||
U870B300 PEXTUBE 3/4" BLUE 300' COIL | |||||||
U870B500 PEXTUBE 3/4" BLUE 500' COIL | |||||||
U880B100 PEXTUBE 1" BLUE 100' COIL | |||||||
U880B300 PEXTUBE 1" BLUE 300' COIL | |||||||
U880B500 PEXTUBE 1" BLUE 500' COIL | |||||||
U860W5 PEXTUBE 1/2" WHITE 5' STICK | |||||||
U860W10 PEXTUBE 1/2" WHITE 10' STICK | |||||||
U860W20 PEXTUBE 1/2" WHITE 20' STICK | |||||||
U870W5 PEXTUBE 3/4" WHITE 5' STICK | |||||||
U870W10 PEXTUBE 3/4" WHITE 10' STICK | |||||||
U870W20 PEXTUBE 3/4" WHITE 20' STICK | |||||||
U880W5 PEXTUBE 1" WHITE 5' STICK | |||||||
U880W10 PEXTUBE 1" WHITE 10' STICK | |||||||
U880W20 PEXTUBE 1" WHITE 20' STICK | |||||||
U885W20 PEXTUBE 1-1/4" WHITE 20' STICK | |||||||
U890W20 PEXTUBE 1-1/2" WHITE 20' STICK | |||||||
U895W20 PEXTUBE 2" WHITE 20' STICK | |||||||
U860R5 PEXTUBE 1/2" RED 5' STICK | |||||||
U860R10 PEXTUBE 1/2" RED 10' STICK | |||||||
U860R20 PEXTUBE 1/2" RED 20' STICK | |||||||
U870R5 PEXTUBE 3/4" RED 5' STICK | |||||||
U870R10 PEXTUBE 3/4" RED 10' STICK | |||||||
U870R20 PEXTUBE 3/4" RED 20' STICK | |||||||
U880R5 PEXTUBE 1" RED 5' STICK | |||||||
U880R10 PEXTUBE 1" RED 10' STICK | |||||||
U880R20 PEXTUBE 1" RED 20' STICK | |||||||
U860B5 PEXTUBE 1/2" BLUE 5' STICK | |||||||
U860B10 PEXTUBE 1/2" BLUE 10' STICK | |||||||
U860B20 PEXTUBE 1/2" BLUE 20' STICK | |||||||
U870B5 PEXTUBE 3/4" BLUE 5' STICK | |||||||
U870B10 PEXTUBE 3/4" BLUE 10' STICK | |||||||
U870B20 PEXTUBE 3/4" BLUE 20' STICK | |||||||
U880B5 PEXTUBE 1" BLUE 5' STICK | |||||||
U880B10 PEXTUBE 1" BLUE 10' STICK | |||||||
U880B20 PEXTUBE 1" BLUE 20' STICK | |||||||
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [3] Certified for Red, White and Blue for 2-layer barrier tubing. Red, White, Blue- PEX 5306 [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
|||||||
Tubing¢ § +++ [2] [3] [G] |
PEX 5306 |
Reliance Worldwide Corporation |
CSA B137.5 |
||||
U860W25 PEXTUBE 1/2" WHITE 25' COIL | |||||||
U860W50 PEXTUBE 1/2" WHITE 50' COIL | |||||||
U860W100 PEXTUBE 1/2" WHITE 100' COIL | |||||||
U860W300 PEXTUBE 1/2" WHITE 300' COIL | |||||||
U860W500 PEXTUBE 1/2" WHITE 500' COIL | |||||||
U870W25 PEXTUBE 3/4" WHITE 25' COIL | |||||||
U870W50 PEXTUBE 3/4" WHITE 50' COIL | |||||||
U870W100 PEXTUBE 3/4" WHITE 100' COIL | |||||||
U870W300 PEXTUBE 3/4" WHITE 300' COIL | |||||||
U870W500 PEXTUBE 3/4" WHITE 500' COIL | |||||||
U880W100 PEXTUBE 1" WHITE 100' COIL | |||||||
U880W300 PEXTUBE 1" WHITE 300' COIL | |||||||
U880W500 PEXTUBE 1" WHITE 500' COIL | |||||||
U885W100 PEXTUBE 1-1/4" WHITE 100' COIL | |||||||
U890W100 PEXTUBE 1-1/2" WHITE 100' COIL | |||||||
U895W100 PEXTUBE 2" WHITE 100' COIL | |||||||
U860R25 PEXTUBE 1/2" RED 25' COIL | |||||||
U860R50 PEXTUBE 1/2" RED 50' COIL | |||||||
U860R100 PEXTUBE 1/2" RED 100' COIL | |||||||
U860R300 PEXTUBE 1/2" RED 300' COIL | |||||||
U860R500 PEXTUBE 1/2" RED 500' COIL | |||||||
U870R25 PEXTUBE 3/4" RED 25' COIL | |||||||
U870R50 PEXTUBE 3/4" RED 50' COIL | |||||||
U870R100 PEXTUBE 3/4" RED 100' COIL | |||||||
U870R300 PEXTUBE 3/4" RED 300' COIL | |||||||
U870R500 PEXTUBE 3/4" RED 500' COIL | |||||||
U880R100 PEXTUBE 1" RED 100' COIL | |||||||
U880R300 PEXTUBE 1" RED 300' COIL | |||||||
U880R500 PEXTUBE 1" RED 500' COIL | |||||||
U860B25 PEXTUBE 1/2" BLUE 25' COIL | |||||||
U860B50 PEXTUBE 1/2" BLUE 50' COIL | |||||||
U860B100 PEXTUBE 1/2" BLUE 100' COIL | |||||||
U860B300 PEXTUBE 1/2" BLUE 300' COIL | |||||||
U860B500 PEXTUBE 1/2" BLUE 500' COIL | |||||||
U870B25 PEXTUBE 3/4" BLUE 25' COIL | |||||||
U870B50 PEXTUBE 3/4" BLUE 50' COIL | |||||||
U870B100 PEXTUBE 3/4" BLUE 100' COIL | |||||||
U870B300 PEXTUBE 3/4" BLUE 300' COIL | |||||||
U870B500 PEXTUBE 3/4" BLUE 500' COIL | |||||||
U880B100 PEXTUBE 1" BLUE 100' COIL | |||||||
U880B300 PEXTUBE 1" BLUE 300' COIL | |||||||
U880B500 PEXTUBE 1" BLUE 500' COIL | |||||||
U860W5 PEXTUBE 1/2" WHITE 5' STICK | |||||||
U860W10 PEXTUBE 1/2" WHITE 10' STICK | |||||||
U860W20 PEXTUBE 1/2" WHITE 20' STICK | |||||||
U870W5 PEXTUBE 3/4" WHITE 5' STICK | |||||||
U870W10 PEXTUBE 3/4" WHITE 10' STICK | |||||||
U870W20 PEXTUBE 3/4" WHITE 20' STICK | |||||||
U880W5 PEXTUBE 1" WHITE 5' STICK | |||||||
U880W10 PEXTUBE 1" WHITE 10' STICK | |||||||
U880W20 PEXTUBE 1" WHITE 20' STICK | |||||||
U885W20 PEXTUBE 1-1/4" WHITE 20' STICK | |||||||
U890W20 PEXTUBE 1-1/2" WHITE 20' STICK | |||||||
U895W20 PEXTUBE 2" WHITE 20' STICK | |||||||
U860R5 PEXTUBE 1/2" RED 5' STICK | |||||||
U860R10 PEXTUBE 1/2" RED 10' STICK | |||||||
U860R20 PEXTUBE 1/2" RED 20' STICK | |||||||
U870R5 PEXTUBE 3/4" RED 5' STICK | |||||||
U870R10 PEXTUBE 3/4" RED 10' STICK | |||||||
U870R20 PEXTUBE 3/4" RED 20' STICK | |||||||
U880R5 PEXTUBE 1" RED 5' STICK | |||||||
U880R10 PEXTUBE 1" RED 10' STICK | |||||||
U880R20 PEXTUBE 1" RED 20' STICK | |||||||
U860B5 PEXTUBE 1/2" BLUE 5' STICK | |||||||
U860B10 PEXTUBE 1/2" BLUE 10' STICK | |||||||
U860B20 PEXTUBE 1/2" BLUE 20' STICK | |||||||
U870B5 PEXTUBE 3/4" BLUE 5' STICK | |||||||
U870B10 PEXTUBE 3/4" BLUE 10' STICK | |||||||
U870B20 PEXTUBE 3/4" BLUE 20' STICK | |||||||
U880B5 PEXTUBE 1" BLUE 5' STICK | |||||||
U880B10 PEXTUBE 1" BLUE 10' STICK | |||||||
U880B20 PEXTUBE 1" BLUE 20' STICK | |||||||
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [2] Pipe Certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked with the following fitting system designations: ASTM F1807, ASTM F2159. [3] Certified for Red, White and Blue for 2-layer barrier tubing. Red, White, Blue- PEX 5306 [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
|||||||
Pipe§ +++ [3] [G] |
PEX 5006 |
Reliance Worldwide Corporation |
ASTM F876/877 |
||||
U860W25 PEXTUBE 1/2" WHITE 25' COIL | |||||||
U860W50 PEXTUBE 1/2" WHITE 50' COIL | |||||||
U860W100 PEXTUBE 1/2" WHITE 100' COIL | |||||||
U860W300 PEXTUBE 1/2" WHITE 300' COIL | |||||||
U860W500 PEXTUBE 1/2" WHITE 500' COIL | |||||||
U870W25 PEXTUBE 3/4" WHITE 25' COIL | |||||||
U870W50 PEXTUBE 3/4" WHITE 50' COIL | |||||||
U870W100 PEXTUBE 3/4" WHITE 100' COIL | |||||||
U870W300 PEXTUBE 3/4" WHITE 300' COIL | |||||||
U870W500 PEXTUBE 3/4" WHITE 500' COIL | |||||||
U880W100 PEXTUBE 1" WHITE 100' COIL | |||||||
U880W300 PEXTUBE 1" WHITE 300' COIL | |||||||
U880W500 PEXTUBE 1" WHITE 500' COIL | |||||||
U885W100 PEXTUBE 1-1/4" WHITE 100' COIL | |||||||
U890W100 PEXTUBE 1-1/2" WHITE 100' COIL | |||||||
U895W100 PEXTUBE 2" WHITE 100' COIL | |||||||
U860R25 PEXTUBE 1/2" RED 25' COIL | |||||||
U860R50 PEXTUBE 1/2" RED 50' COIL | |||||||
U860R100 PEXTUBE 1/2" RED 100' COIL | |||||||
U860R300 PEXTUBE 1/2" RED 300' COIL | |||||||
U860R500 PEXTUBE 1/2" RED 500' COIL | |||||||
U870R25 PEXTUBE 3/4" RED 25' COIL | |||||||
U870R50 PEXTUBE 3/4" RED 50' COIL | |||||||
U870R100 PEXTUBE 3/4" RED 100' COIL | |||||||
U870R300 PEXTUBE 3/4" RED 300' COIL | |||||||
U870R500 PEXTUBE 3/4" RED 500' COIL | |||||||
U880R100 PEXTUBE 1" RED 100' COIL | |||||||
U880R300 PEXTUBE 1" RED 300' COIL | |||||||
U880R500 PEXTUBE 1" RED 500' COIL | |||||||
U860B25 PEXTUBE 1/2" BLUE 25' COIL | |||||||
U860B50 PEXTUBE 1/2" BLUE 50' COIL | |||||||
U860B100 PEXTUBE 1/2" BLUE 100' COIL | |||||||
U860B300 PEXTUBE 1/2" BLUE 300' COIL | |||||||
U860B500 PEXTUBE 1/2" BLUE 500' COIL | |||||||
U870B25 PEXTUBE 3/4" BLUE 25' COIL | |||||||
U870B50 PEXTUBE 3/4" BLUE 50' COIL | |||||||
U870B100 PEXTUBE 3/4" BLUE 100' COIL | |||||||
U870B300 PEXTUBE 3/4" BLUE 300' COIL | |||||||
U870B500 PEXTUBE 3/4" BLUE 500' COIL | |||||||
U880B100 PEXTUBE 1" BLUE 100' COIL | |||||||
U880B300 PEXTUBE 1" BLUE 300' COIL | |||||||
U880B500 PEXTUBE 1" BLUE 500' COIL | |||||||
U860W5 PEXTUBE 1/2" WHITE 5' STICK | |||||||
U860W10 PEXTUBE 1/2" WHITE 10' STICK | |||||||
U860W20 PEXTUBE 1/2" WHITE 20' STICK | |||||||
U870W5 PEXTUBE 3/4" WHITE 5' STICK | |||||||
U870W10 PEXTUBE 3/4" WHITE 10' STICK | |||||||
U870W20 PEXTUBE 3/4" WHITE 20' STICK | |||||||
U880W5 PEXTUBE 1" WHITE 5' STICK | |||||||
U880W10 PEXTUBE 1" WHITE 10' STICK | |||||||
U880W20 PEXTUBE 1" WHITE 20' STICK | |||||||
U885W20 PEXTUBE 1-1/4" WHITE 20' STICK | |||||||
U890W20 PEXTUBE 1-1/2" WHITE 20' STICK | |||||||
U895W20 PEXTUBE 2" WHITE 20' STICK | |||||||
U860R5 PEXTUBE 1/2" RED 5' STICK | |||||||
U860R10 PEXTUBE 1/2" RED 10' STICK | |||||||
U860R20 PEXTUBE 1/2" RED 20' STICK | |||||||
U870R5 PEXTUBE 3/4" RED 5' STICK | |||||||
U870R10 PEXTUBE 3/4" RED 10' STICK | |||||||
U870R20 PEXTUBE 3/4" RED 20' STICK | |||||||
U880R5 PEXTUBE 1" RED 5' STICK | |||||||
U880R10 PEXTUBE 1" RED 10' STICK | |||||||
U880R20 PEXTUBE 1" RED 20' STICK | |||||||
U860B5 PEXTUBE 1/2" BLUE 5' STICK | |||||||
U860B10 PEXTUBE 1/2" BLUE 10' STICK | |||||||
U860B20 PEXTUBE 1/2" BLUE 20' STICK | |||||||
U870B5 PEXTUBE 3/4" BLUE 5' STICK | |||||||
U870B10 PEXTUBE 3/4" BLUE 10' STICK | |||||||
U870B20 PEXTUBE 3/4" BLUE 20' STICK | |||||||
U880B5 PEXTUBE 1" BLUE 5' STICK | |||||||
U880B10 PEXTUBE 1" BLUE 10' STICK | |||||||
U880B20 PEXTUBE 1" BLUE 20' STICK | |||||||
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [3] Certified for Red, White and Blue for 2-layer barrier tubing. Red, White, Blue- PEX 5306 [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
|||||||
Tubing¢ § +++ [2] [3] [G] |
PEX 5006 |
Reliance Worldwide Corporation |
CSA B137.5 |
||||
U860W25 PEXTUBE 1/2" WHITE 25' COIL | |||||||
U860W50 PEXTUBE 1/2" WHITE 50' COIL | |||||||
U860W100 PEXTUBE 1/2" WHITE 100' COIL | |||||||
U860W300 PEXTUBE 1/2" WHITE 300' COIL | |||||||
U860W500 PEXTUBE 1/2" WHITE 500' COIL | |||||||
U870W25 PEXTUBE 3/4" WHITE 25' COIL | |||||||
U870W50 PEXTUBE 3/4" WHITE 50' COIL | |||||||
U870W100 PEXTUBE 3/4" WHITE 100' COIL | |||||||
U870W300 PEXTUBE 3/4" WHITE 300' COIL | |||||||
U870W500 PEXTUBE 3/4" WHITE 500' COIL | |||||||
U880W100 PEXTUBE 1" WHITE 100' COIL | |||||||
U880W300 PEXTUBE 1" WHITE 300' COIL | |||||||
U880W500 PEXTUBE 1" WHITE 500' COIL | |||||||
U885W100 PEXTUBE 1-1/4" WHITE 100' COIL | |||||||
U890W100 PEXTUBE 1-1/2" WHITE 100' COIL | |||||||
U895W100 PEXTUBE 2" WHITE 100' COIL | |||||||
U860R25 PEXTUBE 1/2" RED 25' COIL | |||||||
U860R50 PEXTUBE 1/2" RED 50' COIL | |||||||
U860R100 PEXTUBE 1/2" RED 100' COIL | |||||||
U860R300 PEXTUBE 1/2" RED 300' COIL | |||||||
U860R500 PEXTUBE 1/2" RED 500' COIL | |||||||
U870R25 PEXTUBE 3/4" RED 25' COIL | |||||||
U870R50 PEXTUBE 3/4" RED 50' COIL | |||||||
U870R100 PEXTUBE 3/4" RED 100' COIL | |||||||
U870R300 PEXTUBE 3/4" RED 300' COIL | |||||||
U870R500 PEXTUBE 3/4" RED 500' COIL | |||||||
U880R100 PEXTUBE 1" RED 100' COIL | |||||||
U880R300 PEXTUBE 1" RED 300' COIL | |||||||
U880R500 PEXTUBE 1" RED 500' COIL | |||||||
U860B25 PEXTUBE 1/2" BLUE 25' COIL | |||||||
U860B50 PEXTUBE 1/2" BLUE 50' COIL | |||||||
U860B100 PEXTUBE 1/2" BLUE 100' COIL | |||||||
U860B300 PEXTUBE 1/2" BLUE 300' COIL | |||||||
U860B500 PEXTUBE 1/2" BLUE 500' COIL | |||||||
U870B25 PEXTUBE 3/4" BLUE 25' COIL | |||||||
U870B50 PEXTUBE 3/4" BLUE 50' COIL | |||||||
U870B100 PEXTUBE 3/4" BLUE 100' COIL | |||||||
U870B300 PEXTUBE 3/4" BLUE 300' COIL | |||||||
U870B500 PEXTUBE 3/4" BLUE 500' COIL | |||||||
U880B100 PEXTUBE 1" BLUE 100' COIL | |||||||
U880B300 PEXTUBE 1" BLUE 300' COIL | |||||||
U880B500 PEXTUBE 1" BLUE 500' COIL | |||||||
U860W5 PEXTUBE 1/2" WHITE 5' STICK | |||||||
U860W10 PEXTUBE 1/2" WHITE 10' STICK | |||||||
U860W20 PEXTUBE 1/2" WHITE 20' STICK | |||||||
U870W5 PEXTUBE 3/4" WHITE 5' STICK | |||||||
U870W10 PEXTUBE 3/4" WHITE 10' STICK | |||||||
U870W20 PEXTUBE 3/4" WHITE 20' STICK | |||||||
U880W5 PEXTUBE 1" WHITE 5' STICK | |||||||
U880W10 PEXTUBE 1" WHITE 10' STICK | |||||||
U880W20 PEXTUBE 1" WHITE 20' STICK | |||||||
U885W20 PEXTUBE 1-1/4" WHITE 20' STICK | |||||||
U890W20 PEXTUBE 1-1/2" WHITE 20' STICK | |||||||
U895W20 PEXTUBE 2" WHITE 20' STICK | |||||||
U860R5 PEXTUBE 1/2" RED 5' STICK | |||||||
U860R10 PEXTUBE 1/2" RED 10' STICK | |||||||
U860R20 PEXTUBE 1/2" RED 20' STICK | |||||||
U870R5 PEXTUBE 3/4" RED 5' STICK | |||||||
U870R10 PEXTUBE 3/4" RED 10' STICK | |||||||
U870R20 PEXTUBE 3/4" RED 20' STICK | |||||||
U880R5 PEXTUBE 1" RED 5' STICK | |||||||
U880R10 PEXTUBE 1" RED 10' STICK | |||||||
U880R20 PEXTUBE 1" RED 20' STICK | |||||||
U860B5 PEXTUBE 1/2" BLUE 5' STICK | |||||||
U860B10 PEXTUBE 1/2" BLUE 10' STICK | |||||||
U860B20 PEXTUBE 1/2" BLUE 20' STICK | |||||||
U870B5 PEXTUBE 3/4" BLUE 5' STICK | |||||||
U870B10 PEXTUBE 3/4" BLUE 10' STICK | |||||||
U870B20 PEXTUBE 3/4" BLUE 20' STICK | |||||||
U880B5 PEXTUBE 1" BLUE 5' STICK | |||||||
U880B10 PEXTUBE 1" BLUE 10' STICK | |||||||
U880B20 PEXTUBE 1" BLUE 20' STICK | |||||||
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [2] Pipe Certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked with the following fitting system designations: ASTM F1807, ASTM F2159. [3] Certified for Red, White and Blue for 2-layer barrier tubing. Red, White, Blue- PEX 5306 [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
|||||||
Pipe§ +++ [4] [G] |
PEX 5006 |
Reliance Worldwide Corporation |
ASTM F876/877 |
||||
U860W25 PEXTUBE 1/2" WHITE 25' COIL | |||||||
U860W50 PEXTUBE 1/2" WHITE 50' COIL | |||||||
U860W100 PEXTUBE 1/2" WHITE 100' COIL | |||||||
U860W300 PEXTUBE 1/2" WHITE 300' COIL | |||||||
U860W500 PEXTUBE 1/2" WHITE 500' COIL | |||||||
U870W25 PEXTUBE 3/4" WHITE 25' COIL | |||||||
U870W50 PEXTUBE 3/4" WHITE 50' COIL | |||||||
U870W100 PEXTUBE 3/4" WHITE 100' COIL | |||||||
U870W300 PEXTUBE 3/4" WHITE 300' COIL | |||||||
U870W500 PEXTUBE 3/4" WHITE 500' COIL | |||||||
U880W100 PEXTUBE 1" WHITE 100' COIL | |||||||
U880W300 PEXTUBE 1" WHITE 300' COIL | |||||||
U880W500 PEXTUBE 1" WHITE 500' COIL | |||||||
U885W100 PEXTUBE 1-1/4" WHITE 100' COIL | |||||||
U890W100 PEXTUBE 1-1/2" WHITE 100' COIL | |||||||
U895W100 PEXTUBE 2" WHITE 100' COIL | |||||||
U860R25 PEXTUBE 1/2" RED 25' COIL | |||||||
U860R50 PEXTUBE 1/2" RED 50' COIL | |||||||
U860R100 PEXTUBE 1/2" RED 100' COIL | |||||||
U860R300 PEXTUBE 1/2" RED 300' COIL | |||||||
U860R500 PEXTUBE 1/2" RED 500' COIL | |||||||
U870R25 PEXTUBE 3/4" RED 25' COIL | |||||||
U870R50 PEXTUBE 3/4" RED 50' COIL | |||||||
U870R100 PEXTUBE 3/4" RED 100' COIL | |||||||
U870R300 PEXTUBE 3/4" RED 300' COIL | |||||||
U870R500 PEXTUBE 3/4" RED 500' COIL | |||||||
U880R100 PEXTUBE 1" RED 100' COIL | |||||||
U880R300 PEXTUBE 1" RED 300' COIL | |||||||
U880R500 PEXTUBE 1" RED 500' COIL | |||||||
U860B25 PEXTUBE 1/2" BLUE 25' COIL | |||||||
U860B50 PEXTUBE 1/2" BLUE 50' COIL | |||||||
U860B100 PEXTUBE 1/2" BLUE 100' COIL | |||||||
U860B300 PEXTUBE 1/2" BLUE 300' COIL | |||||||
U860B500 PEXTUBE 1/2" BLUE 500' COIL | |||||||
U870B25 PEXTUBE 3/4" BLUE 25' COIL | |||||||
U870B50 PEXTUBE 3/4" BLUE 50' COIL | |||||||
U870B100 PEXTUBE 3/4" BLUE 100' COIL | |||||||
U870B300 PEXTUBE 3/4" BLUE 300' COIL | |||||||
U870B500 PEXTUBE 3/4" BLUE 500' COIL | |||||||
U880B100 PEXTUBE 1" BLUE 100' COIL | |||||||
U880B300 PEXTUBE 1" BLUE 300' COIL | |||||||
U880B500 PEXTUBE 1" BLUE 500' COIL | |||||||
U860W5 PEXTUBE 1/2" WHITE 5' STICK | |||||||
U860W10 PEXTUBE 1/2" WHITE 10' STICK | |||||||
U860W20 PEXTUBE 1/2" WHITE 20' STICK | |||||||
U870W5 PEXTUBE 3/4" WHITE 5' STICK | |||||||
U870W10 PEXTUBE 3/4" WHITE 10' STICK | |||||||
U870W20 PEXTUBE 3/4" WHITE 20' STICK | |||||||
U880W5 PEXTUBE 1" WHITE 5' STICK | |||||||
U880W10 PEXTUBE 1" WHITE 10' STICK | |||||||
U880W20 PEXTUBE 1" WHITE 20' STICK | |||||||
U885W20 PEXTUBE 1-1/4" WHITE 20' STICK | |||||||
U890W20 PEXTUBE 1-1/2" WHITE 20' STICK | |||||||
U895W20 PEXTUBE 2" WHITE 20' STICK | |||||||
U860R5 PEXTUBE 1/2" RED 5' STICK | |||||||
U860R10 PEXTUBE 1/2" RED 10' STICK | |||||||
U860R20 PEXTUBE 1/2" RED 20' STICK | |||||||
U870R5 PEXTUBE 3/4" RED 5' STICK | |||||||
U870R10 PEXTUBE 3/4" RED 10' STICK | |||||||
U870R20 PEXTUBE 3/4" RED 20' STICK | |||||||
U880R5 PEXTUBE 1" RED 5' STICK | |||||||
U880R10 PEXTUBE 1" RED 10' STICK | |||||||
U880R20 PEXTUBE 1" RED 20' STICK | |||||||
U860B5 PEXTUBE 1/2" BLUE 5' STICK | |||||||
U860B10 PEXTUBE 1/2" BLUE 10' STICK | |||||||
U860B20 PEXTUBE 1/2" BLUE 20' STICK | |||||||
U870B5 PEXTUBE 3/4" BLUE 5' STICK | |||||||
U870B10 PEXTUBE 3/4" BLUE 10' STICK | |||||||
U870B20 PEXTUBE 3/4" BLUE 20' STICK | |||||||
U880B5 PEXTUBE 1" BLUE 5' STICK | |||||||
U880B10 PEXTUBE 1" BLUE 10' STICK | |||||||
U880B20 PEXTUBE 1" BLUE 20' STICK | |||||||
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [4] Certified for Red, White and Blue for 3-layer barrier tubing. Red, White, Blue - PEX 5006 [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
|||||||
Tubing¢ § +++ [1] [4] [G] |
PEX 5006 |
Reliance Worldwide Corporation |
CSA B137.5 |
||||
U860W25 PEXTUBE 1/2" WHITE 25' COIL | |||||||
U860W50 PEXTUBE 1/2" WHITE 50' COIL | |||||||
U860W100 PEXTUBE 1/2" WHITE 100' COIL | |||||||
U860W300 PEXTUBE 1/2" WHITE 300' COIL | |||||||
U860W500 PEXTUBE 1/2" WHITE 500' COIL | |||||||
U870W25 PEXTUBE 3/4" WHITE 25' COIL | |||||||
U870W50 PEXTUBE 3/4" WHITE 50' COIL | |||||||
U870W100 PEXTUBE 3/4" WHITE 100' COIL | |||||||
U870W300 PEXTUBE 3/4" WHITE 300' COIL | |||||||
U870W500 PEXTUBE 3/4" WHITE 500' COIL | |||||||
U880W100 PEXTUBE 1" WHITE 100' COIL | |||||||
U880W300 PEXTUBE 1" WHITE 300' COIL | |||||||
U880W500 PEXTUBE 1" WHITE 500' COIL | |||||||
U885W100 PEXTUBE 1-1/4" WHITE 100' COIL | |||||||
U890W100 PEXTUBE 1-1/2" WHITE 100' COIL | |||||||
U895W100 PEXTUBE 2" WHITE 100' COIL | |||||||
U860R25 PEXTUBE 1/2" RED 25' COIL | |||||||
U860R50 PEXTUBE 1/2" RED 50' COIL | |||||||
U860R100 PEXTUBE 1/2" RED 100' COIL | |||||||
U860R300 PEXTUBE 1/2" RED 300' COIL | |||||||
U860R500 PEXTUBE 1/2" RED 500' COIL | |||||||
U870R25 PEXTUBE 3/4" RED 25' COIL | |||||||
U870R50 PEXTUBE 3/4" RED 50' COIL | |||||||
U870R100 PEXTUBE 3/4" RED 100' COIL | |||||||
U870R300 PEXTUBE 3/4" RED 300' COIL | |||||||
U870R500 PEXTUBE 3/4" RED 500' COIL | |||||||
U880R100 PEXTUBE 1" RED 100' COIL | |||||||
U880R300 PEXTUBE 1" RED 300' COIL | |||||||
U880R500 PEXTUBE 1" RED 500' COIL | |||||||
U860B25 PEXTUBE 1/2" BLUE 25' COIL | |||||||
U860B50 PEXTUBE 1/2" BLUE 50' COIL | |||||||
U860B100 PEXTUBE 1/2" BLUE 100' COIL | |||||||
U860B300 PEXTUBE 1/2" BLUE 300' COIL | |||||||
U860B500 PEXTUBE 1/2" BLUE 500' COIL | |||||||
U870B25 PEXTUBE 3/4" BLUE 25' COIL | |||||||
U870B50 PEXTUBE 3/4" BLUE 50' COIL | |||||||
U870B100 PEXTUBE 3/4" BLUE 100' COIL | |||||||
U870B300 PEXTUBE 3/4" BLUE 300' COIL | |||||||
U870B500 PEXTUBE 3/4" BLUE 500' COIL | |||||||
U880B100 PEXTUBE 1" BLUE 100' COIL | |||||||
U880B300 PEXTUBE 1" BLUE 300' COIL | |||||||
U880B500 PEXTUBE 1" BLUE 500' COIL | |||||||
U860W5 PEXTUBE 1/2" WHITE 5' STICK | |||||||
U860W10 PEXTUBE 1/2" WHITE 10' STICK | |||||||
U860W20 PEXTUBE 1/2" WHITE 20' STICK | |||||||
U870W5 PEXTUBE 3/4" WHITE 5' STICK | |||||||
U870W10 PEXTUBE 3/4" WHITE 10' STICK | |||||||
U870W20 PEXTUBE 3/4" WHITE 20' STICK | |||||||
U880W5 PEXTUBE 1" WHITE 5' STICK | |||||||
U880W10 PEXTUBE 1" WHITE 10' STICK | |||||||
U880W20 PEXTUBE 1" WHITE 20' STICK | |||||||
U885W20 PEXTUBE 1-1/4" WHITE 20' STICK | |||||||
U890W20 PEXTUBE 1-1/2" WHITE 20' STICK | |||||||
U895W20 PEXTUBE 2" WHITE 20' STICK | |||||||
U860R5 PEXTUBE 1/2" RED 5' STICK | |||||||
U860R10 PEXTUBE 1/2" RED 10' STICK | |||||||
U860R20 PEXTUBE 1/2" RED 20' STICK | |||||||
U870R5 PEXTUBE 3/4" RED 5' STICK | |||||||
U870R10 PEXTUBE 3/4" RED 10' STICK | |||||||
U870R20 PEXTUBE 3/4" RED 20' STICK | |||||||
U880R5 PEXTUBE 1" RED 5' STICK | |||||||
U880R10 PEXTUBE 1" RED 10' STICK | |||||||
U880R20 PEXTUBE 1" RED 20' STICK | |||||||
U860B5 PEXTUBE 1/2" BLUE 5' STICK | |||||||
U860B10 PEXTUBE 1/2" BLUE 10' STICK | |||||||
U860B20 PEXTUBE 1/2" BLUE 20' STICK | |||||||
U870B5 PEXTUBE 3/4" BLUE 5' STICK | |||||||
U870B10 PEXTUBE 3/4" BLUE 10' STICK | |||||||
U870B20 PEXTUBE 3/4" BLUE 20' STICK | |||||||
U880B5 PEXTUBE 1" BLUE 5' STICK | |||||||
U880B10 PEXTUBE 1" BLUE 10' STICK | |||||||
U880B20 PEXTUBE 1" BLUE 20' STICK | |||||||
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [1] PEX rings are non-wetted components of PEX fitting systems. [4] Certified for Red, White and Blue for 3-layer barrier tubing. Red, White, Blue - PEX 5006 [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
RHT Radiant Heating Technologies | |
P.O. Box 2270 | |
Vashon, WA 98070 | |
United States | |
206-274-4510 |
Facility : # 1 China
Product Type | Material Type | Trade Name | Product Standard | |||
Tubing$ * ^ § +++ [G] |
PEX 5006 |
RHT™ |
ASTM F876/F877 |
|||
3/8" - 1" SDR 9 | ||||||
$ Certified for blue, red, and white without oxygen barrier. * Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Tubing$ * ¢ § +++ [G] |
PEX |
RHT™ |
CSA B137.5 |
|||
3/8" - 1" SDR 9 | ||||||
$ Certified for blue, red, and white without oxygen barrier. * Accepted by NSF for use in residential and commercial construction, including manufactured housing. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
Product Type | Material Type | Trade Name | Product Standard | |||
Tubing$ @ § |
PEX 5006 |
RHT™ |
ASTM F876/F877 |
|||
3/8" - 1" | ||||||
$ Certified for red with oxygen barrier. @ Accepted by NSF for use in residential and commercial construction, including manufactured housing. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
||||||
Tubing$ @ ¢ § |
PEX |
RHT™ |
CSA B137.5 |
|||
3/8" - 1" | ||||||
$ Certified for red with oxygen barrier. @ Accepted by NSF for use in residential and commercial construction, including manufactured housing. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
Rifeng Enterprise (Foshan) Co., Ltd. | |
5th/F, Rifeng Building | |
16 Zumiao Road | |
Foshan, Guangdong 528000 | |
China | |
86 757 8230 1768 |
Facility : Foshan, China
Product Type | Material Type | Trade Name | Product Standard | |||
Tubing# $ * [2] [10] |
PEX |
Rifeng |
ASTM E84 |
|||
3/8", 1/2" - 2" | ||||||
# The Flame Spread Index and Smoke Developed Index for 1/2"-2" tubing are based on when tubing is field insulated with 1/2" JM Microlok HP Hi performance fiberglass insulation as per RIFENG installation instructions. The 3/8" tubing is not insulated. $ Certified for blue, natural, red, and white without oxygen barrier. * Flame Spread Index and Smoke Developed Index based on minimum spacing of 18 inches between tubing runs. Tubing shall be marked [NSF®-fs ASTM E84 FS<=25/SD<=50]. [2] Flame Spread Index <= 25 Smoke Developed Index <= 50 [10] ASTM E84, 1/2" - 2" The Flame Spread Index and Smoke Developed Index for 1/2" - 2" tubing are based on when tubing is field insulated with 1/2" JM Microlok HP Hi performance fiberglass insulation as per RIFENG installation instructions. The 3/8" tubing is not insulated. |
||||||
Tubing$ & [2] [11] |
PEX |
Rifeng |
CAN/ULC S102.2 |
|||
3/8", 1/2" - 2" | ||||||
$ Certified for blue, natural, red, and white without oxygen barrier. & 3/8" tubing (without insulation) shall be marked [cNSF®-fs ULc S102.2 FS <=25/SD <=50]. 1/2" - 2" tubing (with insulation), Flame Spread Index and Smoke Developed Index based on when the tubing is field insulated with JM Microlok HP Hi Performance Fiberglass insulation as per the pipe manufacturer's installation instructions. Tubing shall be Marked [cNSF®-fs ULc S102.2 FS<=25/SD<=50]. [2] Flame Spread Index <= 25 Smoke Developed Index <= 50 [11] 3/8" Tubing (without insulation) Tubing shall be marked [cNSF®-fs ULc S102.2 FS<=25/SD<=50]. 1/2" through 2" Tubing (with insulation) Flame Spread Rating and Smoke Developed Classification based on when the tubing is field insulated with JM Microlok HP Hi Performance Fiberglass insulation as per the pipe manufacturer's installation instructions. Tubing shall be marked [cNSF®-fs ULc S102.2 FS<=25/SD<=50]. |
||||||
Tubing[1] [3] |
PEX |
RIFENG PEX |
ASTM E84 |
|||
3/8" - 2"[2] | ||||||
[2] Flame Spread Index <= 25 Smoke Developed Index <= 50 [1] Certified for red and white PEX 5106 monowall pipe. [3] The Flame Spread Index and Smoke Developed Index are based on when tubing is field insulated with 1/2" JM Microlok HP Hi performance fiberglass insulation as per RIFENG installation instructions. Flame Spread Index and Smoke Developed Index based on minimum spacing of 18 inches between tubing runs. Tubing shall be marked [NSF®-fs ASTM E84 FS<=25/SD<=50]. |
||||||
Tubing[1] [4] |
PEX |
RIFENG PEX |
CAN/ULC S102.2 |
|||
3/8" - 2"[2] | ||||||
[2] Flame Spread Index <= 25 Smoke Developed Index <= 50 [1] Certified for red and white PEX 5106 monowall pipe. [4] The Flame Spread Index and Smoke Developed Index are based on when the tubing is field insulated with 1/2" JM Microlok HP Hi Performance Fiberglass insulation as per the pipe manufacturer's installation instructions. Tubing shall be Marked [cNSF®-fs ULc S102.2 FS<=25/SD<=50]. |
||||||
Tubing[5] [6] |
PEX |
RIFENG PEX |
ASTM E84 |
|||
3/8" - 1"[2] | ||||||
[2] Flame Spread Index <= 25 Smoke Developed Index <= 50 [5] Certified for blue, red and white PEX 5106 & 5306 2-layer skinned and 4-layer barrier pipe. [6] The Flame Spread Index and Smoke Developed Index are based on when tubing is field insulated with 1/2" JM Microlok HP Hi performance fiberglass insulation as per RIFENG installation instructions (all listed construction/color/size combinations greater than or equal to 3/8" in diameter). Flame Spread Index and Smoke Developed Index based on minimum spacing of 18 inches between tubing runs. Tubing shall be marked [NSF®-fs ASTM E84 FS<=25/SD<=50]. |
||||||
Tubing[5] [7] |
PEX |
RIFENG PEX |
CAN/ULC S102.2 |
|||
3/8" - 1"[2] | ||||||
[2] Flame Spread Index <= 25 Smoke Developed Index <= 50 [5] Certified for blue, red and white PEX 5106 & 5306 2-layer skinned and 4-layer barrier pipe. [7] The Flame Spread Index and Smoke Developed Index are based on when the tubing is field insulated with 1/2" JM Microlok HP Hi Performance Fiberglass insulation as per the pipe manufacturer's installation instructions (all listed construction/color/size combinations greater than or equal to 3/8" in diameter). Tubing shall be Marked [cNSF®-fs ULc S102.2 FS<=25/SD<=50]. |
||||||
Tubing[3] [8] |
PEX |
RIFENG PEXa |
ASTM E84 |
|||
1/8" - 3"[2] | ||||||
[2] Flame Spread Index <= 25 Smoke Developed Index <= 50 [3] The Flame Spread Index and Smoke Developed Index are based on when tubing is field insulated with 1/2" JM Microlok HP Hi performance fiberglass insulation as per RIFENG installation instructions. Flame Spread Index and Smoke Developed Index based on minimum spacing of 18 inches between tubing runs. Tubing shall be marked [NSF®-fs ASTM E84 FS<=25/SD<=50]. [8] Certified for Natural non-barrier single layer tubing for 1/8 - 3" sizes. Certified for red, white, blue 2-layer tubing for 1/2", 5/8" 3/4", 1" sizes only. |
||||||
Tubing[4] [8] |
PEX |
RIFENG PEXa |
CAN/ULC S102.2 |
|||
1/8" - 3"[2] | ||||||
[2] Flame Spread Index <= 25 Smoke Developed Index <= 50 [4] The Flame Spread Index and Smoke Developed Index are based on when the tubing is field insulated with 1/2" JM Microlok HP Hi Performance Fiberglass insulation as per the pipe manufacturer's installation instructions. Tubing shall be Marked [cNSF®-fs ULc S102.2 FS<=25/SD<=50]. [8] Certified for Natural non-barrier single layer tubing for 1/8 - 3" sizes. Certified for red, white, blue 2-layer tubing for 1/2", 5/8" 3/4", 1" sizes only. |
||||||
Tubing[3] [9] |
PEX |
RIFENG PEXa |
ASTM E84 |
|||
1/8" - 3"[2] | ||||||
[2] Flame Spread Index <= 25 Smoke Developed Index <= 50 [3] The Flame Spread Index and Smoke Developed Index are based on when tubing is field insulated with 1/2" JM Microlok HP Hi performance fiberglass insulation as per RIFENG installation instructions. Flame Spread Index and Smoke Developed Index based on minimum spacing of 18 inches between tubing runs. Tubing shall be marked [NSF®-fs ASTM E84 FS<=25/SD<=50]. [9] Certified for Natural non-barrier single layer tubing for 1/8 - 3" sizes. Certified for red, white, blue 2-layer tubing for 1/2", 5/8", 3/4", 1" sizes only. Certified for red, white, blue, orange, natural 3-layer tubing for 1/2", 5/8", 3/4", 1" sizes only. |
||||||
Tubing[4] [9] |
PEX |
RIFENG PEXa |
CAN/ULC S102.2 |
|||
1/8" - 3"[2] | ||||||
[2] Flame Spread Index <= 25 Smoke Developed Index <= 50 [4] The Flame Spread Index and Smoke Developed Index are based on when the tubing is field insulated with 1/2" JM Microlok HP Hi Performance Fiberglass insulation as per the pipe manufacturer's installation instructions. Tubing shall be Marked [cNSF®-fs ULc S102.2 FS<=25/SD<=50]. [9] Certified for Natural non-barrier single layer tubing for 1/8 - 3" sizes. Certified for red, white, blue 2-layer tubing for 1/2", 5/8", 3/4", 1" sizes only. Certified for red, white, blue, orange, natural 3-layer tubing for 1/2", 5/8", 3/4", 1" sizes only. |
Product Type | Material Type | Trade Name | Product Standard | |||
Fittings[7] |
PEX |
RIFENG |
ASTM F1960 |
|||
RIFENG PEX Ring with Stop |
||||||
3/8" - 2" | ||||||
[7] This is a PEX sleeve certified to ASTM F1960 & CSA B137.5. This is a non wetted product. |
||||||
Fittings[7] |
PEX |
RIFENG |
CSA B137.5 |
|||
RIFENG PEX Ring with Stop |
||||||
3/8" - 2" | ||||||
[7] This is a PEX sleeve certified to ASTM F1960 & CSA B137.5. This is a non wetted product. |
||||||
Tubing$ * ^ ¢ § +++ [5] [G] |
PEX |
Rifeng |
CSA B137.5 |
|||
>= 1/8" SDR 9 | ||||||
$ Certified for natural, without oxygen barrier. * Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [5] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked with the following fitting system designations: ASTM F1807, ASTM F2159, ASTM F1960, ASTM F2098. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Tubing! * ^ § +++ [G] |
PEX 5006 |
RIFENG |
CSA B137.5 |
|||
1/8" - 6" SDR 9 | ||||||
! Certified for natural, red, white and blue without oxygen barrier. Natural - 5006 Red, white, blue - 5006, 5106, 5206 * Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Tubing! * ^ § +++ [G] |
PEX 5106 |
RIFENG |
ASTM F876/F877 |
|||
1/8" - 6" SDR 9 | ||||||
! Certified for natural, red, white and blue without oxygen barrier. Natural - 5006 Red, white, blue - 5006, 5106, 5206 * Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Tubing! * ^ § +++ [G] |
PEX 5106 |
RIFENG |
AWWA C904 |
|||
1/2" - 1 1/2" SDR 9 | ||||||
! Certified for natural, red, white and blue without oxygen barrier. Natural - 5006 Red, white, blue - 5006, 5106, 5206 * Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Tubing! * ^ § +++ [G] |
PEX 5106 |
RIFENG |
CSA B137.5 |
|||
1/8" - 6" SDR 9 | ||||||
! Certified for natural, red, white and blue without oxygen barrier. Natural - 5006 Red, white, blue - 5006, 5106, 5206 * Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Tubing! * ^ § +++ [G] |
PEX 5206 |
RIFENG |
ASTM F876/F877 |
|||
1/8" - 6" SDR 9 | ||||||
! Certified for natural, red, white and blue without oxygen barrier. Natural - 5006 Red, white, blue - 5006, 5106, 5206 * Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Tubing! * ^ § +++ [G] |
PEX 5206 |
RIFENG |
AWWA C904 |
|||
1/2" - 1 1/2" SDR 9 | ||||||
! Certified for natural, red, white and blue without oxygen barrier. Natural - 5006 Red, white, blue - 5006, 5106, 5206 * Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Tubing! * ^ § +++ [G] |
PEX 5206 |
RIFENG |
CSA B137.5 |
|||
1/8" - 6" SDR 9 | ||||||
! Certified for natural, red, white and blue without oxygen barrier. Natural - 5006 Red, white, blue - 5006, 5106, 5206 * Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Tubing* ^ ~ ¢ +++ [6] [G] |
PEX 5106 |
RIFENG PEXa |
ASTM F876/F877 |
|||
1/8" - 3" | ||||||
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ~ Certified for Natural non-barrier single layer tubing for 1/8 - 3" sizes. Certified for red, white, blue 2-layer tubing for 1/2", 5/8", 3/4", 1" sizes only. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [6] Certified for the following: 1. Monowall pipe [PEX 5106]: 1/8" - 3" 2. 2-layer skinned pipe for Red, Blue, White [PEX 5106]: 1/2", 5/8", 3/4", 1" sizes only. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Tubing* ^ ~ ¢ +++ [G] [12] |
PEX 5206 |
RIFENG PEXa |
ASTM F876/F877 |
|||
1/2", 5/8", 3/4", 1" | ||||||
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ~ Certified for Natural non-barrier single layer tubing for 1/8 - 3" sizes. Certified for red, white, blue 2-layer tubing for 1/2", 5/8", 3/4", 1" sizes only. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. [12] PEX 5206 Certified for Red, Blue ,White 2-layer for 1/2", 5/8", 3/4", 1" sizes only. |
||||||
Tubing* ^ ~ ¢ +++ [G] [13] |
PEX 5306 |
RIFENG PEXa |
ASTM F876/F877 |
|||
1/2", 5/8", 3/4", 1" | ||||||
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ~ Certified for Natural non-barrier single layer tubing for 1/8 - 3" sizes. Certified for red, white, blue 2-layer tubing for 1/2", 5/8", 3/4", 1" sizes only. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. [13] PEX 5306 Certified for Red, Blue ,White 2-layer for 1/2", 5/8", 3/4", 1" sizes only. |
||||||
Tubing& * ^ ~ ¢ +++ [5] [G] |
PEX 5006 |
RIFENG PEXa |
CSA B137.5 |
|||
1/8" - 3" | ||||||
& Meets the chlorine resistance requirements of ASTM F1281 when tested in accordance with ASTM F2023. * Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ~ Certified for Natural non-barrier single layer tubing for 1/8 - 3" sizes. Certified for red, white, blue 2-layer tubing for 1/2", 5/8", 3/4", 1" sizes only. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [5] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked with the following fitting system designations: ASTM F1807, ASTM F2159, ASTM F1960, ASTM F2098. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Tubing* ^ ¢ +++ [5] [6] [G] |
PEX 5106 |
RIFENG PEXa |
CSA B137.5 |
|||
1/8" - 3" | ||||||
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [5] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked with the following fitting system designations: ASTM F1807, ASTM F2159, ASTM F1960, ASTM F2098. [6] Certified for the following: 1. Monowall pipe [PEX 5106]: 1/8" - 3" 2. 2-layer skinned pipe for Red, Blue, White [PEX 5106]: 1/2", 5/8", 3/4", 1" sizes only. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Tubing* ^ ¢ +++ [5] [G] [12] |
PEX 5206 |
RIFENG PEXa |
CSA B137.5 |
|||
1/2", 5/8", 3/4", 1" | ||||||
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [5] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked with the following fitting system designations: ASTM F1807, ASTM F2159, ASTM F1960, ASTM F2098. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. [12] PEX 5206 Certified for Red, Blue ,White 2-layer for 1/2", 5/8", 3/4", 1" sizes only. |
||||||
Tubing* ^ ¢ +++ [5] [G] [13] |
PEX 5306 |
RIFENG PEXa |
CSA B137.5 |
|||
1/2", 5/8", 3/4", 1" | ||||||
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [5] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked with the following fitting system designations: ASTM F1807, ASTM F2159, ASTM F1960, ASTM F2098. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. [13] PEX 5306 Certified for Red, Blue ,White 2-layer for 1/2", 5/8", 3/4", 1" sizes only. |
||||||
Tubing* ^ ¢ +++ [9] [G] |
PEX 5106 |
RIFENG PEX |
ASTM F876/F877 |
|||
3/8" - 1" | ||||||
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [9] Certified for the following: 2-layer skinned (Natural PEX – White PE) pipe [PEX 5106]: 3/8", 1/2", 5/8",3/4" & 1" 2-layer skinned (Natural PEX – Red, White or Blue PE) pipe [PEX 5306]: 3/8", 1/2", 5/8",3/4" & 1" [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Tubing* ^ ¢ +++ [G] [11] |
PEX 5106 |
RIFENG PEX |
ASTM F876/F877 |
|||
>= 1/8" | ||||||
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. [11] Certified for red and white PEX 5106 monowall pipe. |
||||||
Tubing* ^ ¢ +++ [9] [G] |
PEX 5306 |
RIFENG PEX |
ASTM F876/F877 |
|||
3/8" - 1" | ||||||
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [9] Certified for the following: 2-layer skinned (Natural PEX – White PE) pipe [PEX 5106]: 3/8", 1/2", 5/8",3/4" & 1" 2-layer skinned (Natural PEX – Red, White or Blue PE) pipe [PEX 5306]: 3/8", 1/2", 5/8",3/4" & 1" [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Tubing& * ^ ~ ¢ +++ [9] [G] |
PEX 5106 |
RIFENG PEX |
CSA B137.5 |
|||
3/8" - 1" | ||||||
& Meets the chlorine resistance requirements of ASTM F1281 when tested in accordance with ASTM F2023. * Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ~ Certified for Natural non-barrier single layer tubing for 1/8 - 3" sizes. Certified for red, white, blue 2-layer tubing for 1/2", 5/8", 3/4", 1" sizes only. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [9] Certified for the following: 2-layer skinned (Natural PEX – White PE) pipe [PEX 5106]: 3/8", 1/2", 5/8",3/4" & 1" 2-layer skinned (Natural PEX – Red, White or Blue PE) pipe [PEX 5306]: 3/8", 1/2", 5/8",3/4" & 1" [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Tubing& * ^ ~ ¢ +++ [G] [11] |
PEX 5106 |
RIFENG PEX |
CSA B137.5 |
|||
>= 1/8" | ||||||
& Meets the chlorine resistance requirements of ASTM F1281 when tested in accordance with ASTM F2023. * Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ~ Certified for Natural non-barrier single layer tubing for 1/8 - 3" sizes. Certified for red, white, blue 2-layer tubing for 1/2", 5/8", 3/4", 1" sizes only. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. [11] Certified for red and white PEX 5106 monowall pipe. |
||||||
Tubing& * ^ ¢ +++ [9] [G] [10] |
PEX 5306 |
RIFENG PEX |
CSA B137.5 |
|||
3/8" - 1" | ||||||
& Meets the chlorine resistance requirements of ASTM F1281 when tested in accordance with ASTM F2023. * Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [9] Certified for the following: 2-layer skinned (Natural PEX – White PE) pipe [PEX 5106]: 3/8", 1/2", 5/8",3/4" & 1" 2-layer skinned (Natural PEX – Red, White or Blue PE) pipe [PEX 5306]: 3/8", 1/2", 5/8",3/4" & 1" [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. [10] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked with the following fitting system designations: ASTM F1807, ASTM F2159. |
Product Type | Material Type | Trade Name | Product Standard | |||
Fittings[7] |
PEX |
RIFENG |
ASTM F1960 |
|||
RIFENG PEX Ring with Stop |
||||||
3/8" - 2" | ||||||
[7] This is a PEX sleeve certified to ASTM F1960 & CSA B137.5. This is a non wetted product. |
||||||
Fittings[7] |
PEX |
RIFENG |
CSA B137.5 |
|||
RIFENG PEX Ring with Stop |
||||||
3/8" - 2" | ||||||
[7] This is a PEX sleeve certified to ASTM F1960 & CSA B137.5. This is a non wetted product. |
||||||
Tubing$ * ¢ § [5] |
PEX |
Rifeng |
CSA B137.5 |
|||
>= 1/8" SDR 9 | ||||||
$ Certified for natural, orange, red, and white with oxygen barrier. * Accepted by NSF for use in residential and commercial construction, including manufactured housing. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [5] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked with the following fitting system designations: ASTM F1807, ASTM F2159, ASTM F1960, ASTM F2080, ASTM F2098. |
||||||
Tubing$ * § |
PEX 5006 |
Rifeng |
ASTM F876/F877 |
|||
>= 1/8" SDR 9 | ||||||
$ Certified for natural, orange, red, and white with oxygen barrier. * Accepted by NSF for use in residential and commercial construction, including manufactured housing. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
||||||
Tubing! * ^ § |
PEX 5106 |
RIFENG |
ASTM F876/F877 |
|||
1/8" - 6" SDR 9 | ||||||
! Certified for natural, red, white and blue without oxygen barrier. Natural - 5006 Red, white, blue - 5006, 5106, 5206 * Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
||||||
Tubing! * ^ § |
PEX 5106 |
RIFENG |
AWWA C904 |
|||
1/2" - 1 1/2" SDR 9 | ||||||
! Certified for natural, red, white and blue without oxygen barrier. Natural - 5006 Red, white, blue - 5006, 5106, 5206 * Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
||||||
Tubing! * ^ § |
PEX 5106 |
RIFENG |
CSA B137.5 |
|||
1/8" - 6" SDR 9 | ||||||
! Certified for natural, red, white and blue without oxygen barrier. Natural - 5006 Red, white, blue - 5006, 5106, 5206 * Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
||||||
Tubing! * ^ § |
PEX 5206 |
Rifeng |
ASTM F876/F877 |
|||
1/8" - 6" SDR 9 | ||||||
! Certified for natural, red, white and blue without oxygen barrier. Natural - 5006 Red, white, blue - 5006, 5106, 5206 * Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
||||||
Tubing! * ^ § |
PEX 5206 |
Rifeng |
AWWA C904 |
|||
1/2" - 1 1/2" SDR 9 | ||||||
! Certified for natural, red, white and blue without oxygen barrier. Natural - 5006 Red, white, blue - 5006, 5106, 5206 * Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
||||||
Tubing! * ^ § |
PEX 5206 |
Rifeng |
CSA B137.5 |
|||
1/8" - 6" SDR 9 | ||||||
! Certified for natural, red, white and blue without oxygen barrier. Natural - 5006 Red, white, blue - 5006, 5106, 5206 * Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
||||||
Tubing* ^ ~ ¢ +++ [G] |
PEX 5006 |
RIFENG PEXa |
ASTM F876/F877 |
|||
1/8" - 3" | ||||||
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ~ Certified for Natural non-barrier single layer tubing for 1/8 - 3" sizes. Certified for red, white, blue 2-layer tubing for 1/2", 5/8", 3/4", 1" sizes only. Certified for red, white, blue, orange, natural 3-layer tubing for 1/2", 5/8", 3/4", 1" sizes only. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Tubing* ^ ¢ +++ [6] [G] |
PEX 5106 |
RIFENG PEXa |
ASTM F876/F877 |
|||
1/8" - 3" | ||||||
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [6] Certified for the following: 1. Monowall pipe [PEX 5006/PEX 5106]: 1/8"- 3" 2. 2-layer skinned pipe for Red, Blue, White [PEX 5006/PEX 5106]: 1/2", 5/8", 3/4", 1" sizes only 3. 3-Layer barrier pipe [PEX 5006/PEX 5106]: 1/2", 5/8", 3/4", 1" sizes only [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Tubing* ^ ¢ +++ [G] [12] |
PEX 5206 |
RIFENG PEXa |
ASTM F876/F877 |
|||
1/2", 5/8", 3/4", 1" | ||||||
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. [12] PEX 5206 Certified for Red, Blue, White 2-layer for 1/2", 5/8", 3/4", 1" sizes only. |
||||||
Tubing* ^ ¢ +++ [G] [13] |
PEX 5306 |
RIFENG PEXa |
ASTM F876/F877 |
|||
1/2", 5/8", 3/4", 1" | ||||||
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. [13] PEX 5306 Certified for Red, Blue ,White 2-layer for 1/2", 5/8", 3/4", 1" sizes only. |
||||||
Tubing* ^ ~ ¢ +++ [5] [G] |
PEX 5006 |
RIFENG PEXa |
CSA B137.5 |
|||
1/8" - 3" | ||||||
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ~ Certified for Natural non-barrier single layer tubing for 1/8 - 3" sizes. Certified for red, white, blue 2-layer tubing for 1/2", 5/8", 3/4", 1" sizes only. Certified for red, white, blue, orange, natural 3-layer tubing for 1/2", 5/8", 3/4", 1" sizes only. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [5] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked with the following fitting system designations: ASTM F1807, ASTM F2159, ASTM F1960, ASTM F2080, ASTM F2098. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Tubing* ^ ¢ +++ [6] [G] [14] |
PEX 5106 |
RIFENG PEXa |
CSA B137.5 |
|||
1/8" - 3" | ||||||
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [6] Certified for the following: 1. Monowall pipe [PEX 5006/PEX 5106]: 1/8"- 3" 2. 2-layer skinned pipe for Red, Blue, White [PEX 5006/PEX 5106]: 1/2", 5/8", 3/4", 1" sizes only 3. 3-Layer barrier pipe [PEX 5006/PEX 5106]: 1/2", 5/8", 3/4", 1" sizes only [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. [14] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer and shall be marked with the following fitting system designations: ASTM F1807, ASTM F2159, ASTM F1960, ASTM F2098. |
||||||
Tubing* ^ ¢ +++ [G] [12] [14] |
PEX 5206 |
RIFENG PEXa |
CSA B137.5 |
|||
1/2", 5/8", 3/4", 1" | ||||||
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. [12] PEX 5206 Certified for Red, Blue, White 2-layer for 1/2", 5/8", 3/4", 1" sizes only. [14] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer and shall be marked with the following fitting system designations: ASTM F1807, ASTM F2159, ASTM F1960, ASTM F2098. |
||||||
Tubing* ^ ¢ +++ [G] [13] [14] |
PEX 5306 |
RIFENG PEXa |
CSA B137.5 |
|||
1/2", 5/8", 3/4", 1" | ||||||
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. [13] PEX 5306 Certified for Red, Blue ,White 2-layer for 1/2", 5/8", 3/4", 1" sizes only. [14] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer and shall be marked with the following fitting system designations: ASTM F1807, ASTM F2159, ASTM F1960, ASTM F2098. |
||||||
Tubing* ^ ¢ +++ [8] [G] |
PEX 5106 |
RIFENG PEX |
ASTM F876/F877 |
|||
3/8" - 1" | ||||||
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [8] Certified for the following: 2-layer skinned (Natural PEX – White PE) pipe [PEX 5106]: 3/8", 1/2", 5/8", 3/4" & 1" 2-layer skinned (Natural PEX – Red, White or Blue PE) pipe [PEX 5306]: 3/8", 1/2", 5/8", 3/4" & 1" [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Tubing* ^ ¢ +++ [G] [10] |
PEX 5106 |
RIFENG PEX |
ASTM F876/F877 |
|||
>= 1/8" | ||||||
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. [10] Certified for red and white PEX 5106 monowall pipe. |
||||||
Tubing* ^ ¢ +++ [8] [G] |
PEX 5306 |
RIFENG PEX |
ASTM F876/F877 |
|||
3/8" - 1" | ||||||
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [8] Certified for the following: 2-layer skinned (Natural PEX – White PE) pipe [PEX 5106]: 3/8", 1/2", 5/8", 3/4" & 1" 2-layer skinned (Natural PEX – Red, White or Blue PE) pipe [PEX 5306]: 3/8", 1/2", 5/8", 3/4" & 1" [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Tubing& * ^ ~ ¢ +++ [8] [G] |
PEX 5106 |
RIFENG PEX |
CSA B137.5 |
|||
3/8" - 1" | ||||||
& Meets the chlorine resistance requirements of ASTM F1281 when tested in accordance with ASTM F2023. * Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ~ Certified for Natural non-barrier single layer tubing for 1/8 - 3" sizes. Certified for red, white, blue 2-layer tubing for 1/2", 5/8", 3/4", 1" sizes only. Certified for red, white, blue, orange, natural 3-layer tubing for 1/2", 5/8", 3/4", 1" sizes only. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [8] Certified for the following: 2-layer skinned (Natural PEX – White PE) pipe [PEX 5106]: 3/8", 1/2", 5/8", 3/4" & 1" 2-layer skinned (Natural PEX – Red, White or Blue PE) pipe [PEX 5306]: 3/8", 1/2", 5/8", 3/4" & 1" [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Tubing& * ^ ~ ¢ +++ [G] [10] [11] |
PEX 5106 |
RIFENG PEX |
CSA B137.5 |
|||
& Meets the chlorine resistance requirements of ASTM F1281 when tested in accordance with ASTM F2023. * Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ~ Certified for Natural non-barrier single layer tubing for 1/8 - 3" sizes. Certified for red, white, blue 2-layer tubing for 1/2", 5/8", 3/4", 1" sizes only. Certified for red, white, blue, orange, natural 3-layer tubing for 1/2", 5/8", 3/4", 1" sizes only. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. [10] Certified for red and white PEX 5106 monowall pipe. [11] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer and shall be marked with the following fitting system designations: ASTM F1807, ASTM F2159, ASTM F1960, ASTM F2080, ASTM F2098, ASSE 1061. |
||||||
Tubing& * ^ ~ ¢ +++ [8] [9] [G] |
PEX 5306 |
RIFENG PEX |
CSA B137.5 |
|||
3/8" - 1" | ||||||
& Meets the chlorine resistance requirements of ASTM F1281 when tested in accordance with ASTM F2023. * Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ~ Certified for Natural non-barrier single layer tubing for 1/8 - 3" sizes. Certified for red, white, blue 2-layer tubing for 1/2", 5/8", 3/4", 1" sizes only. Certified for red, white, blue, orange, natural 3-layer tubing for 1/2", 5/8", 3/4", 1" sizes only. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [8] Certified for the following: 2-layer skinned (Natural PEX – White PE) pipe [PEX 5106]: 3/8", 1/2", 5/8", 3/4" & 1" 2-layer skinned (Natural PEX – Red, White or Blue PE) pipe [PEX 5306]: 3/8", 1/2", 5/8", 3/4" & 1" [9] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked with the following fitting system designations: ASTM F1807, ASTM F2159. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
Riifo North America | |
4737 Smokey Bear Lane | |
Columbia Falls, MT 59912 | |
United States | |
406-250-4412 |
Facility : # 1 China
Product Type | Material Type | Trade Name | Product Standard | |||
Tubing# $ * |
PEX |
Riifo |
ASTM E84 |
|||
3/8", 1/2" - 2" |
||||||
Flame Spread Index <= 25 | Smoke Developed Index <= 50 | |||||
# The Flame Spread Index and Smoke Developed Index for 1/2"-2" tubing are based on when tubing is field insulated with 1/2" JM Microlok HP Hi performance fiberglass insulation as per RIFENG installation instructions. The 3/8" tubing is not insulated. $ Certified for blue, natural, red, and white without oxygen barrier. * Flame Spread Index and Smoke Developed Index based on minimum spacing of 18 inches between tubing runs. Tubing shall be marked [NSF®-fs ASTM E84 FS<=25/SD<=50]. |
||||||
Tubing$ & |
PEX |
Riifo |
CAN/ULC S102.2 |
|||
3/8", 1/2" - 2" |
||||||
Flame Spread Rating <= 25 | Smoke Developed Classification <= 50 | |||||
$ Certified for blue, natural, red, and white without oxygen barrier. & 3/8" tubing (without insulation) shall be marked [cNSF®-fs ULc S102.2 FS <=25/SD <=50]. 1/2" - 2" tubing (with insulation), Flame Spread Index and Smoke Developed Index based on when the tubing is field insulated with JM Microlok HP Hi Performance Fiberglass insulation as per the pipe manufacturer's installation instructions. Tubing shall be Marked [cNSF®-fs ULc S102.2 FS<=25/SD<=50]. |
Product Type | Material Type | Trade Name | Product Standard | |||
Fittings[7] |
PEX |
RIIFO |
ASTM F1960 |
|||
RIFENG PEX Ring with Stop |
||||||
3/8" - 2" | ||||||
[7] This is a PEX sleeve certified to ASTM F1960 & CSA B137.5. This is a non wetted product. |
||||||
Fittings[7] |
PEX |
RIIFO |
CSA B137.5 |
|||
RIFENG PEX Ring with Stop |
||||||
3/8" - 2" | ||||||
[7] This is a PEX sleeve certified to ASTM F1960 & CSA B137.5. This is a non wetted product. |
||||||
Tubing$ * ^ ¢ § +++ [G] |
PEX |
Riifo |
CSA B137.5 |
|||
>= 1/8" SDR 9 | ||||||
$ Certified for blue, natural, red, and white without oxygen barrier. * Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Tubing$ * ^ § +++ [G] |
PEX 5006 |
Riifo |
ASTM F876/F877 |
|||
>= 1/8" SDR 9 | ||||||
$ Certified for blue, natural, red, and white without oxygen barrier. * Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Tubing* ^ ~ ¢ +++ [G] |
PEX 5006 |
RIIFO PEXa |
ASTM F876/F877 |
|||
1/8" - 3" | ||||||
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ~ Certified for Natural non-barrier single layer tubing for 1/8 - 3" sizes. Certified for red, white, blue 2-layer tubing for 1/2", 5/8", 3/4", 1" sizes only. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Tubing* ^ ~ ¢ +++ [G] |
PEX 5006[6] |
RIIFO PEXa |
ASTM F876/F877 |
|||
1/2", 5/8", 3/4", 1" | ||||||
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ~ Certified for Natural non-barrier single layer tubing for 1/8 - 3" sizes. Certified for red, white, blue 2-layer tubing for 1/2", 5/8", 3/4", 1" sizes only. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [6] PEX 5106 Certified for Red, Blue ,White 2-layer for 1/2", 5/8", 3/4", 1" sizes only. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Tubing& * ^ ~ ¢ +++ [5] [G] |
PEX 5006 |
RIIFO PEXa |
CSA B137.5 |
|||
1/8" - 3" | ||||||
& Meets the chlorine resistance requirements of ASTM F1281 when tested in accordance with ASTM F2023. * Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ~ Certified for Natural non-barrier single layer tubing for 1/8 - 3" sizes. Certified for red, white, blue 2-layer tubing for 1/2", 5/8", 3/4", 1" sizes only. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [5] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked with the following fitting system designations: ASTM F1807, ASTM F2159, ASTM F1960, F2098. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Tubing& * ^ ~ ¢ +++ [5] [G] |
PEX 5006[6] |
RIIFO PEXa |
CSA B137.5 |
|||
1/2", 5/8", 3/4", 1" | ||||||
& Meets the chlorine resistance requirements of ASTM F1281 when tested in accordance with ASTM F2023. * Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ~ Certified for Natural non-barrier single layer tubing for 1/8 - 3" sizes. Certified for red, white, blue 2-layer tubing for 1/2", 5/8", 3/4", 1" sizes only. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [5] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked with the following fitting system designations: ASTM F1807, ASTM F2159, ASTM F1960, F2098. [6] PEX 5106 Certified for Red, Blue ,White 2-layer for 1/2", 5/8", 3/4", 1" sizes only. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Tubing! * ^ § +++ [G] |
PEX 5006/5206 |
RIIFO |
ASTM F876/F877 |
|||
1/8" -6" SDR 9 | ||||||
! Certified for red, white and blue without oxygen barrier. * Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
Product Type | Material Type | Trade Name | Product Standard | |||
Fittings[7] |
PEX |
RIIFO |
ASTM F1960 |
|||
RIFENG PEX Ring with Stop |
||||||
3/8" - 2" | ||||||
[7] This is a PEX sleeve certified to ASTM F1960 & CSA B137.5. This is a non wetted product. |
||||||
Fittings[7] |
PEX |
RIIFO |
CSA B137.5 |
|||
RIFENG PEX Ring with Stop |
||||||
3/8" - 2" | ||||||
[7] This is a PEX sleeve certified to ASTM F1960 & CSA B137.5. This is a non wetted product. |
||||||
Tubing$ * ¢ § |
PEX |
Riifo |
CSA B137.5 |
|||
>= 1/8" SDR 9 | ||||||
$ Certified for natural, orange, red, and white with oxygen barrier. * Accepted by NSF for use in residential and commercial construction, including manufactured housing. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
||||||
Tubing$ * § |
PEX 5006 |
Riifo |
ASTM F876/F877 |
|||
>= 1/8" SDR 9 | ||||||
$ Certified for natural, orange, red, and white with oxygen barrier. * Accepted by NSF for use in residential and commercial construction, including manufactured housing. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
||||||
Tubing! * ^ § |
PEX 5206 |
RIIFO |
ASTM F876/F877 |
|||
1/8" - 6" SDR 9 | ||||||
! Certified for red, white and blue without oxygen barrier. * Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
||||||
Tubing* ^ ~ ¢ +++ [G] |
PEX 5006 |
RIIFO PEXa |
ASTM F876/F877 |
|||
1/8" - 3" | ||||||
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ~ Certified for Natural non-barrier single layer tubing for 1/8 - 3" sizes. Certified for red, white, blue 2-layer tubing for 1/2", 5/8", 3/4", 1" sizes only. Certified for red, white, blue, orange, natural 3-layer tubing for 1/2", 5/8", 3/4", 1" sizes only. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Tubing! * ^ § |
PEX 5206 |
RIIFO |
CSA B137.5 |
|||
1/8" - 6" SDR 9 | ||||||
! Certified for red, white and blue without oxygen barrier. * Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
||||||
Tubing* ^ ~ ¢ +++ [5] [G] |
PEX 5006 |
RIIFO PEXa |
CSA B137.5 |
|||
1/8" - 3" | ||||||
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ~ Certified for Natural non-barrier single layer tubing for 1/8 - 3" sizes. Certified for red, white, blue 2-layer tubing for 1/2", 5/8", 3/4", 1" sizes only. Certified for red, white, blue, orange, natural 3-layer tubing for 1/2", 5/8", 3/4", 1" sizes only. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [5] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked with the following fitting system designations: ASTM F1807, ASTM F2159, ASTM F1960, ASTM F2080, F2098. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Tubing* ^ ~ ¢ +++ [G] |
PEX 5106[6] |
RIIFO PEXa |
ASTM F876/F877 |
|||
1/2", 5/8", 3/4", 1" | ||||||
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ~ Certified for Natural non-barrier single layer tubing for 1/8 - 3" sizes. Certified for red, white, blue 2-layer tubing for 1/2", 5/8", 3/4", 1" sizes only. Certified for red, white, blue, orange, natural 3-layer tubing for 1/2", 5/8", 3/4", 1" sizes only. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [6] PEX 5106 Certified for Red, Blue ,White 2-layer for 1/2", 5/8", 3/4", 1" sizes only. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Tubing* ^ ~ ¢ +++ [5] [G] |
PEX 5106[6] |
RIIFO PEXa |
CSA B137.5 |
|||
1/2", 5/8", 3/4", 1" | ||||||
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ~ Certified for Natural non-barrier single layer tubing for 1/8 - 3" sizes. Certified for red, white, blue 2-layer tubing for 1/2", 5/8", 3/4", 1" sizes only. Certified for red, white, blue, orange, natural 3-layer tubing for 1/2", 5/8", 3/4", 1" sizes only. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [5] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked with the following fitting system designations: ASTM F1807, ASTM F2159, ASTM F1960, ASTM F2080, F2098. [6] PEX 5106 Certified for Red, Blue ,White 2-layer for 1/2", 5/8", 3/4", 1" sizes only. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
SACO AEI Polymers, Inc. | ![]() |
3220 Crocker Avenue | |
Sheboygan, WI 53081 | |
United States | |
920-803-0778 | |
Visit this company's website |
Facility : Sheboygan, WI
Material Type | End Use | Trade Name | Product Standard |
PEX 5006$ * +++ | 1 | Pexidan® L/T (Natural) | N/A |
PEX 5106$ * +++ | 1 | Pexidan L/T (Red, White, and Blue) | N/A |
PEX 5306$ * +++ | 1 | Pexidan® L/T Eclipse™ Black | N/A |
PEX 5306# $ ^ | 1 | Pexidan® L/T Eclipse™ (Red, White, and Blue) | N/A |
PEX 5206$ * +++ | 1 | Pexidan® L/T-UV | N/A |
PEX 5306$ * +++ | 1 | Pexidan® L/T-UV (Blue) | N/A |
PEX 5206$ * +++ | 1 | Pexidan® L/T-UV (Red and White) | N/A |
PEX 5306$ * +++ | 1 | Pexidan® L/T-UV (Red and White) | N/A |
# Potable water tubing made with Pexidan® L/T Eclipse (Blue, Red, and White) consists of two-layered coextruded tube, having a black inner layer and a colored, outer skin layer. Pexidan® L/T Eclipse (Blue, Red, and White) is not a certified material for solid wall tubing or as a water contact material. $ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. * Tubing manufactured using this material is cure process dependent. Use of this material in NSF Certified tubing requires NSF's prior authorization and transfer of the PPI hydrostatic design basis from the Plastics Pipe Institute (PPI). Tubing produced from this material was tested to the health effects requirements of NSF/ANSI/CAN 61, the performance requirements of ASTM F876/F877, and the performance requirements of CSA B137.5. This material has been qualified for use in tubing at 1/4" and greater diameters. ^ Tubing manufactured using this material is cure process dependent. Use of this material in NSF Certified tubing requires NSF's prior authorization. Coextruded tubing produced using this material as the outer skin layer was tested to the performance requirements as ASTM F876/F877. This material has been qualified for use in tubing at 1/4" and greater diameters. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). |
Safelink Systems, Inc. DBA MrPEX Systems | |
14799 Jackal Street NW | |
Suite 100 | |
Ramsey, MN 55303 | |
United States | |
800-716-3406 | |
952-652-2472 | |
Visit this company's website |
Facility : # 1
Product Type | Material Type | Trade Name | Product Standard | |||
Tubing^ § ** |
PEX |
Mr Pex® Potable |
ASTM E84 |
|||
1/2", 3/4" | ||||||
^ Flame Spread Index <= 25, Smoke Developed Index <= 50 § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. ** Flame Spread Index and Smoke Developed Index based on minimum spacing of 18 inches between tubing runs. Tubing shall be marked [NSF®-fs ASTM E84 FS<=25/SD<=50]. |
Product Type | Material Type | Trade Name | Product Standard | |||
Tubing! * ¢ § ++ [G] |
PEX 5106, PEX 5306 |
Mr Pex® Potable |
ASTM F876/F877 |
|||
3/8" - 2" | ||||||
! Certified for red, blue and natural colors. * Accepted by NSF for use in residential and commercial construction, including manufactured housing. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. ++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Domestic Hot (140° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Tubing! * ¢ § ++ [G] |
PEX 5106, PEX 5306 |
Mr Pex® Potable |
CSA B137.5 |
|||
3/8" - 2" | ||||||
! Certified for red, blue and natural colors. * Accepted by NSF for use in residential and commercial construction, including manufactured housing. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. ++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Domestic Hot (140° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
Shandong Efield Piping System Co., Ltd. | |
No. 2369 Yikang Road | |
Tengzhou, Shandong 277500 | |
China | |
86 632 599 0659 | |
Visit this company's website |
Facility : Shandong, China
Product Type | Material Type | Trade Name | Product Standard | |||
Pipe# & ¢ § +++ [G] |
PEX 5006 |
EFIELD PEX Tubing |
CSA B137.5 |
|||
3/8" - 1" | ||||||
# Certified for blue, white and red without oxygen barrier. & Tubing Certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked with the following fitting system designations: ASTM F2159. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Pipe# & ¢ § +++ [G] |
PEX 5306 |
EFIELD PEX Tubing |
ASTM F876/877 |
|||
3/8" - 1" | ||||||
# Certified for blue, white and red without oxygen barrier. & Tubing Certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked with the following fitting system designations: ASTM F2159. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Pipe# & ¢ § +++ [G] |
PEX 5306 |
EFIELD PEX Tubing |
CSA B137.5 |
|||
3/8" - 1" | ||||||
# Certified for blue, white and red without oxygen barrier. & Tubing Certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked with the following fitting system designations: ASTM F2159. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
Product Type | Material Type | Trade Name | Product Standard | |||
Pipe$ & ¢ § +++ [G] |
PEX 5006 |
EFIELD PEX Barrier Tubing |
ASTM F876/F877 |
|||
3/8" - 1" | ||||||
$ Certified for blue, white and red. & Tubing Certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked with the following fitting system designations: ASTM F2159. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Pipe$ & ¢ § +++ [G] |
PEX 5006 |
EFIELD PEX Barrier Tubing |
CSA B137.5 |
|||
3/8" - 1" | ||||||
$ Certified for blue, white and red. & Tubing Certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked with the following fitting system designations: ASTM F2159. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
Silon s.r.o. | |
Prumyslová 451 | |
Sezimovo Ústí 2 | |
391 02 | |
Czech Republic | |
420 381621111 | |
Visit this company's website |
Facility : Peachtree City, GA
Material Type | End Use | Trade Name | Product Standard |
PEX 5306^ ++ [1] | 1 | TA 1108HD/TA2410 CL Red | N/A |
PEX 5306^ ++ [1] | 1 | TA 1108HD/TA2411 CL Blue | N/A |
PEX 5306^ ++ [1] | 1 | TA 1108HD/TA2412 CL White | N/A |
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Domestic Hot (140° F). [1] Tubing manufactured using this material is cure process dependent. Use of this material in NSF Certified tubing requires NSF's prior authorization. Tubing produced from this material was tested to the performance requirements of ASTM F876 and CSA B137.5. |
Material Type | End Use | Trade Name | Product Standard |
PEX 0306[1] | 1 | TA 1108HD/TA2411 CL Blue | N/A |
PEX 0306[1] | 1 | TA 1108HD/TA2410 CL Red | N/A |
PEX 0306[1] | 1 | TA 1108HD/TA2412 CL White | N/A |
[1] Tubing manufactured using this material is cure process dependent. Use of this material in NSF Certified tubing requires NSF's prior authorization. Tubing produced from this material was tested to the performance requirements of ASTM F876 and CSA B137.5. |
NSF Certified materials and generic ingredients are exempt from bearing an NSF Certification Mark. Certified materials and generic ingredients are identified by the manufacturer name, facility location, and trade designation as shown in the Official Listing.
Facility : Sezimovo Ústí, Czech Republic
Material Type | End Use | Trade Name | Product Standard |
PEX 5306^ ++ [1] | 1 | TA 1108HD/TA2411 CL Blue | N/A |
PEX 5306^ ++ [1] | 1 | TA 1108HD/TA2410 CL Red | N/A |
PEX 5306^ ++ [1] | 1 | TA 1108HD/TA2412 CL White | N/A |
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Domestic Hot (140° F). [1] Tubing manufactured using this material is cure process dependent. Use of this material in NSF Certified tubing requires NSF's prior authorization. Tubing produced from this material was tested to the performance requirements of ASTM F876 and CSA B137.5. |
Sioux Chief Manufacturing Company, Inc. | |
24110 South Peculiar Drive | |
Peculiar, MO 64078 | |
United States | |
800-821-3944 | |
816-779-6104 |
Facility : Peculiar, MO
Product Type | Material Type | Trade Name | Product Standard | |||
Pipe! @ ^ ¢ § +++ [G] |
PEX 5306 |
PowerPEX |
ASTM F876/F877 |
|||
1/8" - 2" SDR 9 | ||||||
! Product may or may not bear the NSF U.P. code marking. @ Product available in red, white, blue or natural. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Pipe& @ ^ ¢ +++ [G] |
PEX 5306 |
PowerPEX |
CSA B137.5 |
|||
1/8" - 2" SDR 9 | ||||||
& Tubing certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked, as applicable, with the following fitting system designation(s): ASTM F1807, ASTM F2080, ASTM F1960, and ASSE 1061. @ Product available in red, white, blue or natural. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Pipe! @ ^ ¢ § +++ [G] |
PEX 5306 |
PowerPEX |
AWWA C904 |
|||
1/2" – 1 1/2" SDR 9 | ||||||
! Product may or may not bear the NSF U.P. code marking. @ Product available in red, white, blue or natural. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
Product Type | Material Type | Trade Name | Product Standard | |||
Pipe |
PEX 5006 |
PowerPEX O2 Barrier |
ASTM F876/F877 |
|||
1/2" - 2" SDR 9 | ||||||
Pipe& ¢ |
PEX |
PowerPEX O2 Barrier |
CSA B137.5 |
|||
1/2" - 2" SDR 9 | ||||||
& Tubing certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked, as applicable, with the following fitting system designation(s): ASTM F1807, ASTM F2080, ASTM F1960, and ASSE 1061. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. |
||||||
Tubing! % ^ § |
PEX 5006 |
PowerPEX O2 Barrier |
ASTM F876/F877 |
|||
1/8" - 1" SDR 9 | ||||||
! Product may or may not bear the NSF U.P. code marking. % Certified product is orange or natural in color. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
||||||
Tubing% & ^ ¢ |
PEX 5006 |
PowerPEX O2 Barrier |
CSA B137.5 |
|||
1/8" - 1" SDR 9 | ||||||
% Certified product is orange or natural in color. & Tubing certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked, as applicable, with the following fitting system designation(s): ASTM F1807, ASTM F2080, ASTM F1960, and ASSE 1061. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. |
Sioux Chief Manufacturing, Inc. | |
24110 South Peculiar Drive | |
Peculiar, MO 64078 | |
United States | |
800-779-6104 | |
816-779-6104 |
Facility : # 1 USA
Product Type | Material Type | Trade Name | Product Standard | |||
Fitting Components§ |
PEX |
![]() |
ASTM F1960 |
|||
1/2" Ring (649W2) | 3/4" Ring (649W3) | 1" Ring (649W4) | ||||
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
||||||
Fitting Components§ |
PEX |
![]() |
CSA B137.5 |
|||
1" Ring (649W4) | 3/4" Ring (649W3) | 1/2" Ring (649W2) | ||||
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
Sioux Chief Manufacturing, Inc. | |
24110 South Peculiar Drive | |
Peculiar, MO 64078 | |
United States | |
800-779-6104 | |
816-779-6104 |
Facility : # 1 USA
Product Type | Material Type | Trade Name | Product Standard | |||
Pipe* ^ § +++ [G] |
PEX 3306 |
PowerPEX Blue |
ASTM F876/F877 |
|||
1/2" - 2" SDR 9 | ||||||
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Pipe* ^ ¢ § +++ [G] |
PEX |
PowerPEX Blue |
CSA B137.5 |
|||
1/2" - 2" SDR 9 | ||||||
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Pipe* ^ § [G] |
PEX 3006 |
PowerPEX Red |
ASTM F876/F877 |
|||
1/2" - 2" SDR 9 | ||||||
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Pipe* ^ ¢ § +++ [G] |
PEX |
PowerPEX Red |
CSA B137.5 |
|||
1/2" - 2" SDR 9 | ||||||
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Pipe* ^ § +++ [G] |
PEX 3306 |
PowerPEX White |
ASTM F876/F877 |
|||
1/2" - 2" SDR 9 | ||||||
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Pipe* ^ ¢ § +++ [G] |
PEX |
PowerPEX White |
CSA B137.5 |
|||
1/2" - 2" SDR 9 | ||||||
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
Stream 33 Products, LLC | |
2620 Ridgewood Road | |
Akron, OH 44313 | |
United States | |
330-762-9621 | |
Visit this company's website |
Facility : Guangdong, China
Product Type | Material Type | Trade Name | Product Standard | |||
Fittings[1] |
PEX |
Stream33 |
ASTM F1960 |
|||
PEX Ring with Stop |
||||||
3/8" - 2" | ||||||
[1] This is a PEX sleeve certified to ASTM F1960 & CSA B137.5. This is a non wetted product. |
||||||
Fittings[1] |
PEX |
Stream33 |
CSA B137.5 |
|||
PEX Ring with Stop |
||||||
3/8" - 2" | ||||||
[1] This is a PEX sleeve certified to ASTM F1960 & CSA B137.5. This is a non wetted product. |
Stream33 Products, LLC | |
2620 Ridgewood Road | |
Akron, OH 44313 | |
United States | |
330-475-8231 | |
Visit this company's website |
Facility : Peculiar, MO
Product Type | Material Type | Trade Name | Product Standard | |||
Pipe! @ ^ ¢ § +++ [G] |
PEX 5306 |
STREAM33 |
ASTM F876/F877 |
|||
1/2" - 2" SDR 9 | ||||||
! Product may or may not bear the NSF U.P. code Marking. @ Product available in red, white, or blue. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Pipe@ ^ ¢ § +++ [G] |
PEX 5306 |
STREAM33 |
CSA B137.5 |
|||
1/2" - 2" SDR 9 | ||||||
@ Product available in red, white, or blue. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Pipe! @ ^ ¢ § +++ [G] |
PEX 5306 |
STEAM33 |
AWWA C904 |
|||
1/2" – 1 1/2" SDR 9 | ||||||
! Product may or may not bear the NSF U.P. code Marking. @ Product available in red, white, or blue. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
Stream33 Products, LLC | |
2620 Ridgewood Road | |
Akron, OH 44313 | |
United States | |
800-362-9532 | |
330-762-9621 |
Facility : # 1 USA
Product Type | Material Type | Trade Name | Product Standard | |||
Pipe* ^ § +++ [G] |
PEX 3306 |
Stream33 Blue PEX-a |
ASTM F876/F877 |
|||
1/2" - 1" SDR 9 | ||||||
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Pipe% * ^ ¢ § +++ [G] |
PEX |
Stream33 Blue PEX-a |
CSA B137.5 |
|||
1/2" - 1" SDR 9 | ||||||
% Tubing certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked, as applicable, with the following fitting system designation(s): ASTM F877,F1807, F1960, F2080 and F2159. * Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Pipe* ^ § +++ [G] |
PEX 3306 |
Stream33 Red PEX-a |
ASTM F876/F877 |
|||
1/2" - 1" SDR 9 | ||||||
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Pipe% * ^ ¢ § +++ [G] |
PEX |
Stream33 Red PEX-a |
CSA B137.5 |
|||
1/2" - 1" SDR 9 | ||||||
% Tubing certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked, as applicable, with the following fitting system designation(s): ASTM F877,F1807, F1960, F2080 and F2159. * Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Pipe* ^ § +++ [G] |
PEX 3306 |
Stream33 White PEX-a |
ASTM F876/F877 |
|||
1/2" - 2" SDR 9 | ||||||
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Pipe% * ^ ¢ § +++ [G] |
PEX |
Stream33 White PEX-a |
CSA B137.5 |
|||
1/2" - 2" SDR 9 | ||||||
% Tubing certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked, as applicable, with the following fitting system designation(s): ASTM F877,F1807, F1960, F2080 and F2159. * Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
The Boys, LLC dba SupplyHouse.com | |
130 Spagnoli Road | |
Melville, NY 11747 | |
United States | |
631-393-2855 |
Facility : # 1 China
Product Type | Material Type | Trade Name | Product Standard | |||
Tubing# $ * |
PEX |
Bluefin |
ASTM E84 |
|||
3/8", 1/2" - 2" |
||||||
Flame Spread Index <= 25 | Smoke Developed Index <= 50 | |||||
# The Flame Spread Index and Smoke Developed Index for 1/2"-2" tubing are based on when tubing is field insulated with 1/2" JM Microlok HP Hi performance fiberglass $ Certified for blue, natural, red, and white without oxygen barrier. * Flame Spread Index and Smoke Developed Index based on minimum spacing of 18 inches between tubing runs. Tubing shall be marked [NSF®-fs ASTM E84 FS<=25/SD<=50]. |
||||||
Tubing$ & |
PEX |
Bluefin |
CAN/ULC S102.2 |
|||
3/8", 1/2" - 2" |
||||||
Flame Spread Rating <= 25 | Smoke Developed Classification <= 50 | |||||
$ Certified for blue, natural, red, and white without oxygen barrier. & 3/8" tubing (without insulation) shall be marked [cNSF®-fs ULc S102.2 FS <=25/SD <=50]. 1/2" - 2" tubing (with insulation), Flame Spread Index and Smoke Developed Index based on when the tubing is field insulated with JM Microlok HP Hi Performance Fiberglass insulation as per the pipe manufacturer's installation instructions. Tubing shall be Marked [cNSF®-fs ULc S102.2 FS<=25/SD<=50]. |
Product Type | Material Type | Trade Name | Product Standard | |||
Tubing$ * ^ § +++ [G] |
PEX 5006 |
Bluefin |
ASTM F876/F877 |
|||
>=1/8" SDR 9 | ||||||
$ Certified for blue, natural, red, and white without oxygen barrier. * Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Tubing$ * ^ ¢ § +++ [G] |
PEX |
Bluefin |
CSA B137.5 |
|||
>=1/8" SDR 9 | ||||||
$ Certified for blue, natural, red, and white without oxygen barrier. * Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
Product Type | Material Type | Trade Name | Product Standard | |||
Tubing$ * ¢ § |
PEX |
Bluefin |
CSA B137.5 |
|||
>= 1/8" SDR 9 | ||||||
$ Certified for natural, orange, red, and white with oxygen barrier. * Accepted by NSF for use in residential and commercial construction, including manufactured housing. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
||||||
Tubing$ * § |
PEX 5006 |
Bluefin |
ASTM F876/F877 |
|||
>= 1/8" SDR 9 | ||||||
$ Certified for natural, orange, red, and white with oxygen barrier. * Accepted by NSF for use in residential and commercial construction, including manufactured housing. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
The Mosack Group | |
11210 Allen Station Drive | |
Mint Hill, NC 28227 | |
United States | |
704-479-6584 | |
Visit this company's website |
Facility : Cambodia
Product Type | Material Type | Trade Name | Product Standard | ||||
Fittings[1] |
PEX |
The Mosack Group |
ASTM F1960 |
||||
PEX Ring with stop |
|||||||
WEPXS12 1/2" | WEPXS34 3/4" | EPXS1225PK 1/2" | EPXS3425PK 3/4" | ||||
EPXS125PK 1" | |||||||
[1] PEX rings are non-wetted components of PEX fitting systems. |
|||||||
Fittings[1] |
PEX |
The Mosack Group |
CSA B137.5 |
||||
PEX Ring with stop |
|||||||
WEPXS12 1/2" | WEPXS34 3/4" | EPXS1225PK 1/2" | EPXS3425PK 3/4" | ||||
EPXS125PK 1" | |||||||
[1] PEX rings are non-wetted components of PEX fitting systems. |
Product Type | Material Type | Trade Name | Product Standard | ||||
Fittings[1] |
PEX |
The Mosack Group |
ASTM F1960 |
||||
PEX Ring with stop |
|||||||
WEPXS12 1/2" | WEPXS34 3/4" | EPXS1225PK 1/2" | EPXS3425PK 3/4" | ||||
EPXS125PK 1" | |||||||
[1] PEX rings are non-wetted components of PEX fitting systems. |
|||||||
Fittings[1] |
PEX |
The Mosack Group |
CSA B137.5 |
||||
PEX Ring with stop |
|||||||
WEPXS12 1/2" | WEPXS34 3/4" | EPXS1225PK 1/2" | EPXS3425PK 3/4" | ||||
EPXS125PK 1" | |||||||
[1] PEX rings are non-wetted components of PEX fitting systems. |
The Mosack Group, Inc. | |
701 Matthews-Mint Hill Road | |
Matthews, NC 28105 | |
United States | |
704-847-9191 |
Facility : Foshan, China
Product Type | Material Type | Trade Name | Product Standard | ||||
Tubing# $ * ^ § +++ [G] |
PEX |
Apollo/TMG/PurePEX/PureLink |
ASTM E84 |
||||
3/8", 1/2" - 2"[1] |
|||||||
WPPB2034 | WPPB2012 | WPPR2012 | WPPW2012 | ||||
WPPW2034 | WPPR2034 | WPPW201 | |||||
68PXB100012 1/2" |
|||||||
Flame Spread Index <= 25 | Flame Spread Index <= 25 | ||||||
68PXB100038 3/8" |
|||||||
Flame Spread Index <= 25 | Smoke Developed Index <= 50 | ||||||
68PXB1001 1" |
|||||||
Flame Spread Index <= 25 | Smoke Developed Index <= 50 | ||||||
68PXB10012 1/2" |
|||||||
Flame Spread Index <= 25 | Smoke Developed Index <= 50 | ||||||
68PXB10034 3/4" |
|||||||
Flame Spread Index <= 25 | Smoke Developed Index <= 50 | ||||||
68PXB10038 3/8" |
|||||||
Flame Spread Index <= 25 | Smoke Developed Index <= 50 | ||||||
68PXB1012 1/2" |
|||||||
Flame Spread Index <= 25 | Smoke Developed Index <= 50 | ||||||
68PXB1034 3/4" |
|||||||
Flame Spread Index <= 25 | Smoke Developed Index <= 50 | ||||||
68PXB201 1" |
|||||||
Flame Spread Index <= 25 | Smoke Developed Index <= 50 | ||||||
68PXB2012 1/2" |
|||||||
Flame Spread Index <= 25 | Smoke Developed Index <= 50 | ||||||
68PXB2034 3/4" |
|||||||
Flame Spread Index <= 25 | Smoke Developed Index <= 50 | ||||||
68PXB3001 1" |
|||||||
Flame Spread Index <= 25 | Smoke Developed Index <= 50 | ||||||
68PXB30012 1/2" |
|||||||
Flame Spread Index <= 25 | Smoke Developed Index <= 50 | ||||||
68PXB30034 3/4" |
|||||||
Flame Spread Index <= 25 | Smoke Developed Index <= 50 | ||||||
68PXB5001 1" |
|||||||
Flame Spread Index <= 25 | Smoke Developed Index <= 50 | ||||||
68PXB50012 1/2" |
|||||||
Flame Spread Index <= 25 | Smoke Developed Index <= 50 | ||||||
68PXB50034 3/4" |
|||||||
Flame Spread Index <= 25 | Smoke Developed Index <= 50 | ||||||
68PXB50038 3/8" |
|||||||
Flame Spread Index <= 25 | Smoke Developed Index <= 50 | ||||||
68PXR100012 1/2" |
|||||||
Flame Spread Index <= 25 | Smoke Developed Index <= 50 | ||||||
68PXR100038 3/8" |
|||||||
Flame Spread Index <= 25 | Smoke Developed Index <= 50 | ||||||
68PXR1001 1" |
|||||||
Flame Spread Index <= 25 | Smoke Developed Index <= 50 | ||||||
68PXR10012 1/2" |
|||||||
Flame Spread Index <= 25 | Smoke Developed Index <= 50 | ||||||
68PXR10034 3/4" |
|||||||
Flame Spread Index <= 25 | Smoke Developed Index <= 50 | ||||||
68PXR10038 3/8" |
|||||||
Flame Spread Index <= 25 | Smoke Developed Index <= 50 | ||||||
68PXR1012 1/2" |
|||||||
Flame Spread Index <= 25 | Smoke Developed Index <= 50 | ||||||
68PXR1034 3/4" |
|||||||
Flame Spread Index <= 25 | Smoke Developed Index <= 50 | ||||||
68PXR201 1" |
|||||||
Flame Spread Index <= 25 | Smoke Developed Index <= 50 | ||||||
68PXR2012 1/2" |
|||||||
Flame Spread Index <= 25 | Smoke Developed Index <= 50 | ||||||
68PXR2034 3/4" |
|||||||
Flame Spread Index <= 25 | Smoke Developed Index <= 50 | ||||||
68PXR3001 1" |
|||||||
Flame Spread Index <= 25 | Smoke Developed Index <= 50 | ||||||
68PXR30012 1/2" |
|||||||
Flame Spread Index <= 25 | Smoke Developed Index <= 50 | ||||||
68PXR30034 3/4" |
|||||||
Flame Spread Index <= 25 | Smoke Developed Index <= 50 | ||||||
68PXR5001 1" |
|||||||
Flame Spread Index <= 25 | Smoke Developed Index <= 50 | ||||||
68PXR50012 1/2" |
|||||||
Flame Spread Index <= 25 | Smoke Developed Index <= 50 | ||||||
68PXR50034 3/4" |
|||||||
Flame Spread Index <= 25 | Smoke Developed Index <= 50 | ||||||
68PXR50038 3/8" |
|||||||
Flame Spread Index <= 25 | Smoke Developed Index <= 50 | ||||||
68PXW100012 1/2" |
|||||||
Flame Spread Index <= 25 | Smoke Developed Index <= 50 | ||||||
68PXW100038 3/8" |
|||||||
Flame Spread Index <= 25 | Smoke Developed Index <= 50 | ||||||
68PXW1001 1" |
|||||||
Flame Spread Index <= 25 | Smoke Developed Index <= 50 | ||||||
68PXW10012 1/2" |
|||||||
Flame Spread Index <= 25 | Smoke Developed Index <= 50 | ||||||
68PXW10034 3/4" |
|||||||
Flame Spread Index <= 25 | Smoke Developed Index <= 50 | ||||||
68PXW10038 3/8" |
|||||||
Flame Spread Index <= 25 | Smoke Developed Index <= 50 | ||||||
68PXW1012 1/2" |
|||||||
Flame Spread Index <= 25 | Smoke Developed Index <= 50 | ||||||
68PXW1034 3/4" |
|||||||
Flame Spread Index <= 25 | Smoke Developed Index <= 50 | ||||||
68PXW201 1" |
|||||||
Flame Spread Index <= 25 | Smoke Developed Index <= 50 | ||||||
68PXW2012 1/2" |
|||||||
Flame Spread Index <= 25 | Smoke Developed Index <= 50 | ||||||
68PXW2034 3/4" |
|||||||
Flame Spread Index <= 25 | Smoke Developed Index <= 50 | ||||||
68PXW3001 1" |
|||||||
Flame Spread Index <= 25 | Smoke Developed Index <= 50 | ||||||
68PXW30012 1/2" |
|||||||
Flame Spread Index <= 25 | Smoke Developed Index <= 50 | ||||||
68PXW30034 3/4" |
|||||||
Flame Spread Index <= 25 | Smoke Developed Index <= 50 | ||||||
68PXW5001 1" |
|||||||
Flame Spread Index <= 25 | Smoke Developed Index <= 50 | ||||||
68PXW50012 1/2" |
|||||||
Flame Spread Index <= 25 | Smoke Developed Index <= 50 | ||||||
68PXW50034 3/4" |
|||||||
Flame Spread Index <= 25 | Smoke Developed Index <= 50 | ||||||
68PXW50038 3/8" |
|||||||
Flame Spread Index <= 25 | Smoke Developed Index <= 50 | ||||||
APPB1001 1" |
|||||||
Flame Spread Index <= 25 | Smoke Developed Index <= 50 | ||||||
APPB10012 1/2" |
|||||||
Flame Spread Index <= 25 | Smoke Developed Index <= 50 | ||||||
APPB10034 3/4" |
|||||||
Flame Spread Index <= 25 | Smoke Developed Index <= 50 | ||||||
APPB101 1" |
|||||||
Flame Spread Index <= 25 | Smoke Developed Index <= 50 | ||||||
APPB1210 1/2" |
|||||||
Flame Spread Index <= 25 | Smoke Developed Index <= 50 | ||||||
APPB201 1" |
|||||||
Flame Spread Index <= 25 | Smoke Developed Index <= 50 | ||||||
APPB2012 1/2" |
|||||||
Flame Spread Index <= 25 | Smoke Developed Index <= 50 | ||||||
APPB2034 3/4" |
|||||||
Flame Spread Index <= 25 | Smoke Developed Index <= 50 | ||||||
APPB212 1/2" |
|||||||
Flame Spread Index <= 25 | Smoke Developed Index <= 50 | ||||||
APPB234 3/4" |
|||||||
Flame Spread Index <= 25 | Smoke Developed Index <= 50 | ||||||
APPB30012 1/2" |
|||||||
Flame Spread Index <= 25 | Smoke Developed Index <= 50 | ||||||
APPB30034 3/4" |
|||||||
Flame Spread Index <= 25 | Smoke Developed Index <= 50 | ||||||
APPB3410 3/4" |
|||||||
Flame Spread Index <= 25 | Smoke Developed Index <= 50 | ||||||
APPB50012 1/2" |
|||||||
Flame Spread Index <= 25 | Smoke Developed Index <= 50 | ||||||
APPB50034 3/4" |
|||||||
Flame Spread Index <= 25 | Smoke Developed Index <= 50 | ||||||
APPB512 1/2" |
|||||||
Flame Spread Index <= 25 | Smoke Developed Index <= 50 | ||||||
APPB534 3/4" |
|||||||
Flame Spread Index <= 25 | Smoke Developed Index <= 50 | ||||||
APPR1001 1" |
|||||||
Flame Spread Index <= 25 | Smoke Developed Index <= 50 | ||||||
APPR10012 1/2" |
|||||||
Flame Spread Index <= 25 | Smoke Developed Index <= 50 | ||||||
APPR10034 3/4" |
|||||||
Flame Spread Index <= 25 | Smoke Developed Index <= 50 | ||||||
APPR101 1" |
|||||||
Flame Spread Index <= 25 | Smoke Developed Index <= 50 | ||||||
APPR1210 1/2" |
|||||||
Flame Spread Index <= 25 | Smoke Developed Index <= 50 | ||||||
APPR201 1" |
|||||||
Flame Spread Index <= 25 | Smoke Developed Index <= 50 | ||||||
APPR2012 1/2" |
|||||||
Flame Spread Index <= 25 | Smoke Developed Index <= 50 | ||||||
APPR2034 3/4" |
|||||||
Flame Spread Index <= 25 | Smoke Developed Index <= 50 | ||||||
APPR212 1/2" |
|||||||
Flame Spread Index <= 25 | Smoke Developed Index <= 50 | ||||||
APPR234 3/4" |
|||||||
Flame Spread Index <= 25 | Smoke Developed Index <= 50 | ||||||
APPR30012 1/2" |
|||||||
Flame Spread Index <= 25 | Smoke Developed Index <= 50 | ||||||
APPR30034 3/4" |
|||||||
Flame Spread Index <= 25 | Smoke Developed Index <= 50 | ||||||
APPR3410 3/4" |
|||||||
Flame Spread Index <= 25 | Smoke Developed Index <= 50 | ||||||
APPR50012 1/2" |
|||||||
Flame Spread Index <= 25 | Smoke Developed Index <= 50 | ||||||
APPR50034 3/4" |
|||||||
Flame Spread Index <= 25 | Smoke Developed Index <= 50 | ||||||
APPR512 1/2" |
|||||||
Flame Spread Index <= 25 | Smoke Developed Index <= 50 | ||||||
APPR534 3/4" |
|||||||
Flame Spread Index <= 25 | Smoke Developed Index <= 50 | ||||||
APPW1001 1" |
|||||||
Flame Spread Index <= 25 | Smoke Developed Index <= 50 | ||||||
APPW10012 1/2" |
|||||||
Flame Spread Index <= 25 | Smoke Developed Index <= 50 | ||||||
APPW10034 3/4" |
|||||||
Flame Spread Index <= 25 | Smoke Developed Index <= 50 | ||||||
APPW101 1" |
|||||||
Flame Spread Index <= 25 | Smoke Developed Index <= 50 | ||||||
APPW1012 1/2" |
|||||||
Flame Spread Index <= 25 | Smoke Developed Index <= 50 | ||||||
APPW1034 3/4" |
|||||||
Flame Spread Index <= 25 | Smoke Developed Index <= 50 | ||||||
APPW1038 3/8" |
|||||||
Flame Spread Index <= 25 | Smoke Developed Index <= 50 | ||||||
APPW201 1" |
|||||||
Flame Spread Index <= 25 | Smoke Developed Index <= 50 | ||||||
APPW2012 1/2" |
|||||||
Flame Spread Index <= 25 | Smoke Developed Index <= 50 | ||||||
APPW2034 3/4" |
|||||||
Flame Spread Index <= 25 | Smoke Developed Index <= 50 | ||||||
APPW212 1/2" |
|||||||
Flame Spread Index <= 25 | Smoke Developed Index <= 50 | ||||||
APPW234 3/4" |
|||||||
Flame Spread Index <= 25 | Smoke Developed Index <= 50 | ||||||
APPW2512 1/2" |
|||||||
Flame Spread Index <= 25 | Smoke Developed Index <= 50 | ||||||
APPW2534 3/4" |
|||||||
Flame Spread Index <= 25 | Smoke Developed Index <= 50 | ||||||
APPW30012 1/2" |
|||||||
Flame Spread Index <= 25 | Smoke Developed Index <= 50 | ||||||
APPW30034 3/4" |
|||||||
Flame Spread Index <= 25 | Smoke Developed Index <= 50 | ||||||
APPW50012 1/2" |
|||||||
Flame Spread Index <= 25 | Smoke Developed Index <= 50 | ||||||
APPW50034 3/4" |
|||||||
Flame Spread Index <= 25 | Smoke Developed Index <= 50 | ||||||
APPW5012 1/2" |
|||||||
Flame Spread Index <= 25 | Smoke Developed Index <= 50 | ||||||
APPW5034 3/4" |
|||||||
Flame Spread Index <= 25 | Smoke Developed Index <= 50 | ||||||
APPW51 1" |
|||||||
Flame Spread Index <= 25 | Smoke Developed Index <= 50 | ||||||
APPW512 1/2" |
|||||||
Flame Spread Index <= 25 | Smoke Developed Index <= 50 | ||||||
APPW534 3/4" |
|||||||
Flame Spread Index <= 25 | Smoke Developed Index <= 50 | ||||||
APPW538 3/8" |
|||||||
Flame Spread Index <= 25 | Smoke Developed Index <= 50 | ||||||
[1] Flame Spread Index <= 25 Smoke Developed Index <= 50 # The Flame Spread Index and Smoke Developed Index for 1/2"-2" tubing are based on when tubing is field insulated with 1/2" JM Microlok HP Hi performance fiberglass insulation as per RIFENG installation instructions. The 3/8" tubing is not insulated. $ Certified for blue, natural, red, and white without oxygen barrier. * Flame Spread Index and Smoke Developed Index based on minimum spacing of 18 inches between tubing runs. Tubing shall be marked [NSF®-fs ASTM E84 FS<=25/SD<=50]. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
|||||||
Tubing$ & § +++ [G] |
PEX |
Apollo/TMG/PurePEX/PureLink |
CAN/ULC S102.2 |
||||
3/8", 1/2" - 2"[1] |
|||||||
WPPW2034 | WPPB2034 | WPPR2012 | WPPR2034 | ||||
WPPW201 | WPPW2012 | WPPB2012 | |||||
68PXB100012 1/2" |
|||||||
Flame Spread Index <= 25 | Smoke Developed Index <= 50 | ||||||
68PXB100038 3/8" |
|||||||
Flame Spread Index <= 25 | Smoke Developed Index <= 50 | ||||||
68PXB1001 1" |
|||||||
Flame Spread Index <= 25 | Smoke Developed Index <= 50 | ||||||
68PXB10012 1/2" |
|||||||
Flame Spread Index <= 25 | Smoke Developed Index <= 50 | ||||||
68PXB10034 3/4" |
|||||||
Flame Spread Index <= 25 | Smoke Developed Index <= 50 | ||||||
68PXB10038 3/8" |
|||||||
Flame Spread Index <= 25 | Smoke Developed Index <= 50 | ||||||
68PXB1012 1/2" |
|||||||
Flame Spread Index <= 25 | Smoke Developed Index <= 50 | ||||||
68PXB1034 3/4" |
|||||||
Flame Spread Index <= 25 | Smoke Developed Index <= 50 | ||||||
68PXB201 1" |
|||||||
Flame Spread Index <= 25 | Smoke Developed Index <= 50 | ||||||
68PXB2012 1/2" |
|||||||
Flame Spread Index <= 25 | Smoke Developed Index <= 50 | ||||||
68PXB2034 3/4" |
|||||||
Flame Spread Index <= 25 | Smoke Developed Index <= 50 | ||||||
68PXB3001 1" |
|||||||
Flame Spread Index <= 25 | Smoke Developed Index <= 50 | ||||||
68PXB30012 1/2" |
|||||||
Flame Spread Index <= 25 | Smoke Developed Index <= 50 | ||||||
68PXB30034 3/4" |
|||||||
Flame Spread Index <= 25 | Smoke Developed Index <= 50 | ||||||
68PXB5001 1" |
|||||||
Flame Spread Index <= 25 | Smoke Developed Index <= 50 | ||||||
68PXB50012 1/2" |
|||||||
Flame Spread Index <= 25 | Smoke Developed Index <= 50 | ||||||
68PXB50034 3/4" |
|||||||
Flame Spread Index <= 25 | Smoke Developed Index <= 50 | ||||||
68PXB50038 3/8" |
|||||||
Flame Spread Index <= 25 | Smoke Developed Index <= 50 | ||||||
68PXR100012 1/2" |
|||||||
Flame Spread Index <= 25 | Smoke Developed Index <= 50 | ||||||
68PXR100038 3/8" |
|||||||
Flame Spread Index <= 25 | Smoke Developed Index <= 50 | ||||||
68PXR1001 1" |
|||||||
Flame Spread Index <= 25 | Smoke Developed Index <= 50 | ||||||
68PXR10012 1/2" |
|||||||
Flame Spread Index <= 25 | Smoke Developed Index <= 50 | ||||||
68PXR10034 3/4" |
|||||||
Flame Spread Index <= 25 | Smoke Developed Index <= 50 | ||||||
68PXR10038 3/8" |
|||||||
Flame Spread Index <= 25 | Smoke Developed Index <= 50 | ||||||
68PXR1012 1/2" |
|||||||
Flame Spread Index <= 25 | Smoke Developed Index <= 50 | ||||||
68PXR1034 3/4" |
|||||||
Flame Spread Index <= 25 | Smoke Developed Index <= 50 | ||||||
68PXR201 1" |
|||||||
Flame Spread Index <= 25 | Smoke Developed Index <= 50 | ||||||
68PXR2012 1/2" |
|||||||
Flame Spread Index <= 25 | Smoke Developed Index <= 50 | ||||||
68PXR2034 3/4" |
|||||||
Flame Spread Index <= 25 | Smoke Developed Index <= 50 | ||||||
68PXR3001 1" |
|||||||
Flame Spread Index <= 25 | Smoke Developed Index <= 50 | ||||||
68PXR30012 1/2" |
|||||||
Flame Spread Index <= 25 | Smoke Developed Index <= 50 | ||||||
68PXR30034 3/4" |
|||||||
Flame Spread Index <= 25 | Smoke Developed Index <= 50 | ||||||
68PXR5001 1" |
|||||||
Flame Spread Index <= 25 | Smoke Developed Index <= 50 | ||||||
68PXR50012 1/2" |
|||||||
Flame Spread Index <= 25 | Smoke Developed Index <= 50 | ||||||
68PXR50034 3/4" |
|||||||
Flame Spread Index <= 25 | Smoke Developed Index <= 50 | ||||||
68PXR50038 3/8" |
|||||||
Flame Spread Index <= 25 | Smoke Developed Index <= 50 | ||||||
68PXW100012 1/2" |
|||||||
Flame Spread Index <= 25 | Smoke Developed Index <= 50 | ||||||
68PXW100038 3/8" |
|||||||
Flame Spread Index <= 25 | Smoke Developed Index <= 50 | ||||||
68PXW1001 1" |
|||||||
Flame Spread Index <= 25 | Smoke Developed Index <= 50 | ||||||
68PXW10012 1/2" |
|||||||
Flame Spread Index <= 25 | Smoke Developed Index <= 50 | ||||||
68PXW10034 3/4" |
|||||||
Flame Spread Index <= 25 | Smoke Developed Index <= 50 | ||||||
68PXW10038 3/8" |
|||||||
Flame Spread Index <= 25 | Smoke Developed Index <= 50 | ||||||
68PXW1012 1/2" |
|||||||
Flame Spread Index <= 25 | Smoke Developed Index <= 50 | ||||||
68PXW1034 3/4" |
|||||||
Flame Spread Index <= 25 | Smoke Developed Index <= 50 | ||||||
68PXW201 1" |
|||||||
Flame Spread Index <= 25 | Smoke Developed Index <= 50 | ||||||
68PXW2012 1/2" |
|||||||
Flame Spread Index <= 25 | Smoke Developed Index <= 50 | ||||||
68PXW2034 3/4" |
|||||||
Flame Spread Index <= 25 | Smoke Developed Index <= 50 | ||||||
68PXW3001 1" |
|||||||
Flame Spread Index <= 25 | Smoke Developed Index <= 50 | ||||||
68PXW30012 1/2" |
|||||||
Flame Spread Index <= 25 | Smoke Developed Index <= 50 | ||||||
68PXW30034 3/4" |
|||||||
Flame Spread Index <= 25 | Smoke Developed Index <= 50 | ||||||
68PXW5001 1" |
|||||||
Flame Spread Index <= 25 | Smoke Developed Index <= 50 | ||||||
68PXW50012 1/2" |
|||||||
Flame Spread Index <= 25 | Smoke Developed Index <= 50 | ||||||
68PXW50034 3/4" |
|||||||
Flame Spread Index <= 25 | Smoke Developed Index <= 50 | ||||||
68PXW50038 3/8" |
|||||||
Flame Spread Index <= 25 | Smoke Developed Index <= 50 | ||||||
APPB1001 1" |
|||||||
Flame Spread Index <= 25 | Smoke Developed Index <= 50 | ||||||
APPB10012 1/2" |
|||||||
Flame Spread Rating <= 25 | Smoke Developed Classification <= 50 | ||||||
APPB10034 3/4" |
|||||||
Flame Spread Index <= 25 | Smoke Developed Index <= 50 | ||||||
APPB101 1" |
|||||||
Flame Spread Index <= 25 | Smoke Developed Index <= 50 | ||||||
APPB1210 1/2" |
|||||||
Flame Spread Index <= 25 | Smoke Developed Index <= 50 | ||||||
APPB201 1" |
|||||||
Flame Spread Index <= 25 | Smoke Developed Index <= 50 | ||||||
APPB2012 1/2" |
|||||||
Flame Spread Index <= 25 | Smoke Developed Index <= 50 | ||||||
APPB2034 3/4" |
|||||||
Flame Spread Index <= 25 | Smoke Developed Index <= 50 | ||||||
APPB212 1/2" |
|||||||
Flame Spread Index <= 25 | Smoke Developed Index <= 50 | ||||||
APPB234 3/4" |
|||||||
Flame Spread Index <= 25 | Smoke Developed Index <= 50 | ||||||
APPB30012 1/2" |
|||||||
Flame Spread Index <= 25 | Smoke Developed Index <= 50 | ||||||
APPB30034 3/4" |
|||||||
Flame Spread Index <= 25 | Smoke Developed Index <= 50 | ||||||
APPB3410 3/4" |
|||||||
Flame Spread Index <= 25 | Smoke Developed Index <= 50 | ||||||
APPB50012 1/2" |
|||||||
Flame Spread Index <= 25 | Smoke Developed Index <= 50 | ||||||
APPB50034 3/4" |
|||||||
Flame Spread Index <= 25 | Smoke Developed Index <= 50 | ||||||
APPB512 1/2" |
|||||||
Flame Spread Index <= 25 | Smoke Developed Index <= 50 | ||||||
APPB534 3/4" |
|||||||
Flame Spread Index <= 25 | Smoke Developed Index <= 50 | ||||||
APPR1001 1" |
|||||||
Flame Spread Index <= 25 | Smoke Developed Index <= 50 | ||||||
APPR10012 1/2" |
|||||||
Flame Spread Index <= 25 | Smoke Developed Index <= 50 | ||||||
APPR10034 3/4" |
|||||||
Flame Spread Index <= 25 | Smoke Developed Index <= 50 | ||||||
APPR101 1" |
|||||||
Flame Spread Index <= 25 | Smoke Developed Index <= 50 | ||||||
APPR1210 1/2" |
|||||||
Flame Spread Index <= 25 | Smoke Developed Index <= 50 | ||||||
APPR201 1" |
|||||||
Flame Spread Index <= 25 | Smoke Developed Index <= 50 | ||||||
APPR2012 1/2" |
|||||||
Flame Spread Index <= 25 | Smoke Developed Index <= 50 | ||||||
APPR2034 3/4" |
|||||||
Flame Spread Index <= 25 | Smoke Developed Index <= 50 | ||||||
APPR212 1/2" |
|||||||
Flame Spread Index <= 25 | Smoke Developed Index <= 50 | ||||||
APPR234 3/4" |
|||||||
Flame Spread Index <= 25 | Smoke Developed Index <= 50 | ||||||
APPR30012 1/2" |
|||||||
Flame Spread Index <= 25 | Smoke Developed Index <= 50 | ||||||
APPR30034 3/4" |
|||||||
Flame Spread Index <= 25 | Smoke Developed Index <= 50 | ||||||
APPR3410 3/4" |
|||||||
Flame Spread Index <= 25 | Smoke Developed Index <= 50 | ||||||
APPR50012 1/2" |
|||||||
Flame Spread Index <= 25 | Smoke Developed Index <= 50 | ||||||
APPR50034 3/4" |
|||||||
Flame Spread Index <= 25 | Smoke Developed Index <= 50 | ||||||
APPR512 1/2" |
|||||||
Flame Spread Index <= 25 | Smoke Developed Index <= 50 | ||||||
APPR534 3/4" |
|||||||
Flame Spread Index <= 25 | Smoke Developed Index <= 50 | ||||||
APPW1001 1" |
|||||||
Flame Spread Index <= 25 | Smoke Developed Index <= 50 | ||||||
APPW10012 1/2" |
|||||||
Flame Spread Index <= 25 | Smoke Developed Index <= 50 | ||||||
APPW10034 3/4" |
|||||||
Flame Spread Index <= 25 | Smoke Developed Index <= 50 | ||||||
APPW101 1" |
|||||||
Flame Spread Index <= 25 | Smoke Developed Index <= 50 | ||||||
APPW1012 1/2" |
|||||||
Flame Spread Index <= 25 | Smoke Developed Index <= 50 | ||||||
APPW1034 3/4" |
|||||||
Flame Spread Index <= 25 | Smoke Developed Index <= 50 | ||||||
APPW1038 3/8" |
|||||||
Flame Spread Index <= 25 | Smoke Developed Index <= 50 | ||||||
APPW201 1" |
|||||||
Flame Spread Index <= 25 | Smoke Developed Index <= 50 | ||||||
APPW2012 1/2" |
|||||||
Flame Spread Index <= 25 | Smoke Developed Index <= 50 | ||||||
APPW2034 3/4" |
|||||||
Flame Spread Index <= 25 | Smoke Developed Index <= 50 | ||||||
APPW212 1/2" |
|||||||
Flame Spread Index <= 25 | Smoke Developed Index <= 50 | ||||||
APPW234 3/4" |
|||||||
Flame Spread Index <= 25 | Smoke Developed Index <= 50 | ||||||
APPW2512 1/2" |
|||||||
Flame Spread Index <= 25 | Smoke Developed Index <= 50 | ||||||
APPW2534 3/4" |
|||||||
Flame Spread Index <= 25 | Smoke Developed Index <= 50 | ||||||
APPW30012 1/2" |
|||||||
Flame Spread Index <= 25 | Smoke Developed Index <= 50 | ||||||
APPW30034 3/4" |
|||||||
Flame Spread Index <= 25 | Smoke Developed Index <= 50 | ||||||
APPW50012 1/2" |
|||||||
Flame Spread Index <= 25 | Smoke Developed Index <= 50 | ||||||
APPW50034 3/4" |
|||||||
Flame Spread Index <= 25 | Smoke Developed Index <= 50 | ||||||
APPW5012 1/2" |
|||||||
Flame Spread Index <= 25 | Smoke Developed Index <= 50 | ||||||
APPW5034 3/4" |
|||||||
Flame Spread Index <= 25 | Smoke Developed Index <= 50 | ||||||
APPW51 1" |
|||||||
Flame Spread Index <= 25 | Smoke Developed Index <= 50 | ||||||
APPW512 1/2" |
|||||||
Flame Spread Index <= 25 | Smoke Developed Index <= 50 | ||||||
APPW534 3/4" |
|||||||
Flame Spread Index <= 25 | Smoke Developed Index <= 50 | ||||||
APPW538 3/8" |
|||||||
Flame Spread Index <= 25 | Smoke Developed Index <= 50 | ||||||
[1] Flame Spread Index <= 25 Smoke Developed Index <= 50 $ Certified for blue, natural, red, and white without oxygen barrier. & 3/8" tubing (without insulation) shall be marked [cNSF®-fs ULc S102.2 FS <=25/SD <=50]. 1/2" - 2" tubing (with insulation), Flame Spread Index and Smoke Developed Index based on when the tubing is field insulated with JM Microlok HP Hi Performance Fiberglass insulation as per the pipe manufacturer's installation instructions. Tubing shall be Marked [cNSF®-fs ULc S102.2 FS<=25/SD<=50]. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
Product Type | Material Type | Trade Name | Product Standard | ||||
Tubing$ * ^ § +++ [G] |
PEX 5006 |
Apollo/TMG/PurePEX/PureLink |
ASTM F876/F877 |
||||
>= 1/8" SDR 9 |
|||||||
APPB1001 1" | APPB10012 1/2" | APPB10034 3/4" | APPB1210 1/2" | ||||
APPB2012 1/2" | APPB2034 3/4" | APPB3001 1" | APPB30012 1/2" | ||||
APPB30034 3/4" | APPB3410 3/4" | APPB50012 1/2" | APPB50034 3/4" | ||||
APPR1001 1" | APPR10012 1/2" | APPR10034 3/4" | APPR1210 1/2" | ||||
APPR2012 1/2" | APPR2034 3/4" | APPR3001 1" | APPR30012 1/2" | ||||
APPR30034 3/4" | APPR3410 3/4" | APPR50012 1/2" | APPR50034 3/4" | ||||
APPW1001 1" | APPW10012 1/2" | APPW10034 3/4" | APPW1012 1/2" | ||||
APPW1034 3/4" | APPW2012 1/2" | APPW2034 3/4" | APPW3001 1" | ||||
APPW30012 1/2" | APPW30034 3/4" | APPW50012 1/2" | APPW50034 3/4" | ||||
APPW51 1" | APPW512 1/2" | APPW514 1/4" | APPW534 3/4" | ||||
APPW538 3/8" | |||||||
$ Certified for blue, natural, red, and white without oxygen barrier. * Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
|||||||
Tubing$ * ^ ¢ § +++ [G] |
PEX 5006 |
Apollo/TMG/PurePEX/PureLink |
CSA B137.5 |
||||
>= 1/8" SDR 9 |
|||||||
APPB1001 1" | APPB10012 1/2" | APPB10034 3/4" | APPB1210 1/2" | ||||
APPB2012 1/2" | APPB2034 3/4" | APPB3001 1" | APPB30012 1/2" | ||||
APPB30034 3/4" | APPB3410 3/4" | APPB50012 1/2" | APPB50034 3/4" | ||||
APPR1001 1" | APPR10012 1/2" | APPR10034 3/4" | APPR1210 1/2" | ||||
APPR2012 1/2" | APPR2034 3/4" | APPR3001 1" | APPR30012 1/2" | ||||
APPR30034 3/4" | APPR3410 3/4" | APPR50012 1/2" | APPR50034 3/4" | ||||
APPW1001 1" | APPW10012 1/2" | APPW10034 3/4" | APPW1012 1/2" | ||||
APPW1034 3/4" | APPW2012 1/2" | APPW2034 3/4" | APPW3001 1" | ||||
APPW30012 1/2" | APPW30034 3/4" | APPW50012 1/2" | APPW50034 3/4" | ||||
APPW51 1" | APPW512 1/2" | APPW514 1/4" | APPW534 3/4" | ||||
APPW538 3/8" | |||||||
$ Certified for blue, natural, red, and white without oxygen barrier. * Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
|||||||
Tubing# * § +++ [G] |
PEX 5006 |
Apollo/TMG/PurePEX/PureLink |
ASTM F876/F877 |
||||
68PXB100012 1/2" | 68PXB100038 3/8" | 68PXB1001 1" | 68PXB10012 1/2" | ||||
68PXB10034 3/4" | 68PXB10038 3/8" | 68PXB1012 1/2" | 68PXB1034 3/4" | ||||
68PXB201 1" | 68PXB2012 1/2" | 68PXB2034 3/4" | 68PXB3001 1" | ||||
68PXB30012 1/2" | 68PXB30034 3/4" | 68PXB5001 1" | 68PXB50012 1/2" | ||||
68PXB50034 3/4" | 68PXB50038 3/8" | 68PXR100012 1/2" | 68PXR100038 3/8" | ||||
68PXR1001 1" | 68PXR10012 1/2" | 68PXR10034 3/4" | 68PXR10038 3/8" | ||||
68PXR1012 1/2" | 68PXR1034 3/4" | 68PXR201 1" | 68PXR2012 1/2" | ||||
68PXR2034 3/4" | 68PXR3001 1" | 68PXR30012 1/2" | 68PXR30034 3/4" | ||||
68PXR5001 1" | 68PXR50012 1/2" | 68PXR50034 3/4" | 68PXR50038 3/8" | ||||
68PXW100012 1/2" | 68PXW100038 3/8" | 68PXW1001 1" | 68PXW10012 1/2" | ||||
68PXW10034 3/4" | 68PXW10038 3/8" | 68PXW1012 1/2" | 68PXW1034 3/4" | ||||
68PXW201 1" | 68PXW2012 1/2" | 68PXW2034 3/4" | 68PXW3001 1" | ||||
68PXW30012 1/2" | 68PXW30034 3/4" | 68PXW5001 1" | 68PXW50012 1/2" | ||||
68PXW50034 3/4" | 68PXW50038 3/8" | APPB101 1" | APPB1210 1/2" | ||||
APPB212 1/2" | APPB234 3/4" | APPB3410 3/4" | APPB512 1/2" | ||||
APPB534 3/4" | APPR1210 1/2" | APPR212 1/2" | APPR234 3/4" | ||||
APPR3410 3/4" | APPR512 1/2" | APPR534 3/4" | APPW101 1" | ||||
APPW1038 3/8" | APPW14RISER 1/4" | APPW201 1" | APPW212 1/2" | ||||
APPW234 3/4" | APPW2512 1/2" | APPW2534 3/4" | APPW5012 1/2" | ||||
APPW5034 3/4" | |||||||
# Certified for black, blue, natural, orange, red, and white. * Accepted by NSF for use in residential and commercial construction, including manufactured housing. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
|||||||
Tubing# § +++ [G] |
PEX 5006 |
Apollo/TMG/PurePEX/PureLink |
CSA B137.5 |
||||
68PXB100012 1/2" | 68PXB100038 3/8" | 68PXB1001 1" | 68PXB10012 1/2" | ||||
68PXB10034 3/4" | 68PXB10038 3/8" | 68PXB1012 1/2" | 68PXB1034 3/4" | ||||
68PXB201 1" | 68PXB2012 1/2" | 68PXB2034 3/4" | 68PXB3001 1" | ||||
68PXB30012 1/2" | 68PXB30034 3/4" | 68PXB5001 1" | 68PXB50012 1/2" | ||||
68PXB50034 3/4" | 68PXB50038 3/8" | 68PXR100012 1/2" | 68PXR100038 3/8" | ||||
68PXR1001 1" | 68PXR10012 1/2" | 68PXR10034 3/4" | 68PXR10038 3/8" | ||||
68PXR1012 1/2" | 68PXR1034 3/4" | 68PXR201 1" | 68PXR2012 1/2" | ||||
68PXR2034 3/4" | 68PXR3001 1" | 68PXR30012 1/2" | 68PXR30034 3/4" | ||||
68PXR5001 1" | 68PXR50012 1/2" | 68PXR50034 3/4" | 68PXR50038 3/8" | ||||
68PXW100012 1/2" | 68PXW100038 3/8" | 68PXW1001 1" | 68PXW10012 1/2" | ||||
68PXW10034 3/4" | 68PXW10038 3/8" | 68PXW1012 1/2" | 68PXW1034 3/4" | ||||
68PXW201 1" | 68PXW2012 1/2" | 68PXW2034 3/4" | 68PXW3001 1" | ||||
68PXW30012 1/2" | 68PXW30034 3/4" | 68PXW5001 1" | 68PXW50012 1/2" | ||||
68PXW50034 3/4" | 68PXW50038 3/8" | APPB101 1" | APPB1210 1/2" | ||||
APPB212 1/2" | APPB234 3/4" | APPB3410 3/4" | APPB512 1/2" | ||||
APPB534 3/4" | APPR1210 1/2" | APPR212 1/2" | APPR234 3/4" | ||||
APPR3410 3/4" | APPR512 1/2" | APPR534 3/4" | APPW101 1" | ||||
APPW1038 3/8" | APPW14RISER 1/4" | APPW201 1" | APPW212 1/2" | ||||
APPW234 3/4" | APPW2512 1/2" | APPW2534 3/4" | APPW5012 1/2" | ||||
APPW5034 3/4" | |||||||
# Certified for black, blue, natural, orange, red, and white. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
|||||||
Tubing! $ * ^ +++ [G] |
PEX 5106 |
Apollo/TMG/PurePEX/PureLink |
CSA B137.5 |
||||
1/8" - 6" SDR 9 |
|||||||
WPPB2012 | WPPB2034 | WPPR2012 | WPPR2034 | ||||
WPPW201 | WPPW2012 | WPPW2034 | |||||
! Certified for natural, red, white and blue without oxygen barrier. Natural - 5006 Red, white, blue - 5006, 5106, 5206 $ Certified for blue, natural, red, and white without oxygen barrier. * Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
|||||||
Tubing* ^ ~ ¢ +++ [1] [G] |
PEX 5106[2] |
Apollo/TMG/PurePEX/PureLink |
CSA B137.5 |
||||
1/2", 5/8", 3/4", 1" |
|||||||
EPPB1012S | EPPB1034S | EPPB2012S | EPPB2034S | ||||
EPPB30034S | EPPR10034S | EPPR1012S | EPPR1034S | ||||
EPPR2012S | EPPR2034S | EPPR30012S | EPPR30034S | ||||
EPPW1001 | EPPW10012 | EPPW10034 | EPPW101 | ||||
EPPW1012 | EPPW1034 | EPPW201 | EPPW2012 | ||||
EPPW2034 | EPPW30012 | EPPW30034 | EPPW50034 | ||||
EPPW51 | EPPW512 | EPPW534 | WEPPW5001 | ||||
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ~ Certified for Natural non-barrier single layer tubing for 1/8 - 3" sizes. Certified for red, white, blue 2-layer tubing for 1/2", 5/8", 3/4", 1" sizes only. Certified for red, white, blue, orange, natural 3-layer tubing for 1/2", 5/8", 3/4", 1" sizes only. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [1] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked with the following fitting system designations: ASTM F1807, ASTM F2159, ASTM F1960, ASTM F2080, F2098. [2] PEX 5106 Certified for Red, Blue ,White 2-layer for 1/2", 5/8", 3/4", 1" sizes only. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
|||||||
Tubing& * ^ ~ ¢ +++ [G] |
PEX 5106[3] |
Apollo/TMG/PurePEX/PureLink |
CSA B137.5 |
||||
3/8" - 1" |
|||||||
WPPB2012 | WPPB2034 | WPPR2012 | WPPR2034 | ||||
WPPW201 | WPPW2012 | WPPW2034 | |||||
& Meets the chlorine resistance requirements of ASTM F1281 when tested in accordance with ASTM F2023. * Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ~ Certified for Natural non-barrier single layer tubing for 1/8 - 3" sizes. Certified for red, white, blue 2-layer tubing for 1/2", 5/8", 3/4", 1" sizes only. Certified for red, white, blue, orange, natural 3-layer tubing for 1/2", 5/8", 3/4", 1" sizes only. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [3] Certified for the following: 2-layer skinned (Natural PEX – White PE) pipe [PEX 5106]: 3/8", 1/2", 5/8", 3/4" & 1" 2-layer skinned (Natural PEX – Red, White or Blue PE) pipe [PEX 5306]: 3/8", 1/2", 5/8", 3/4" & 1" [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
|||||||
Tubing& * ^ ~ ¢ +++ [4] [G] |
PEX 5306[3] |
Apollo/TMG/PurePEX/PureLink |
CSA B137.5 |
||||
3/8" - 1" |
|||||||
WPPB2012 | WPPB2034 | WPPR2012 | WPPR2034 | ||||
WPPW201 | WPPW2012 | WPPW2034 | |||||
& Meets the chlorine resistance requirements of ASTM F1281 when tested in accordance with ASTM F2023. * Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ~ Certified for Natural non-barrier single layer tubing for 1/8 - 3" sizes. Certified for red, white, blue 2-layer tubing for 1/2", 5/8", 3/4", 1" sizes only. Certified for red, white, blue, orange, natural 3-layer tubing for 1/2", 5/8", 3/4", 1" sizes only. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [3] Certified for the following: 2-layer skinned (Natural PEX – White PE) pipe [PEX 5106]: 3/8", 1/2", 5/8", 3/4" & 1" 2-layer skinned (Natural PEX – Red, White or Blue PE) pipe [PEX 5306]: 3/8", 1/2", 5/8", 3/4" & 1" [4] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked with the following fitting system designations: ASTM F1807, ASTM F2159. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
|||||||
Tubing! * ^ § +++ [G] |
PEX 5106 |
Apollo/TMG/PurePEX/PureLink |
ASTM F876/F877 |
||||
1/8" - 6" SDR 9 |
|||||||
WPPB2012 | WPPB2034 | WPPR2012 | WPPR2034 | ||||
WPPW201 | WPPW2012 | WPPW2034 | |||||
! Certified for natural, red, white and blue without oxygen barrier. Natural - 5006 Red, white, blue - 5006, 5106, 5206 * Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
|||||||
Tubing$ * ^ ~ ¢ +++ [G] |
PEX 5106[5] |
Apollo/TMG/PurePEX/PureLink |
ASTM F876/F877 |
||||
1/2", 5/8", 3/4", 1" |
|||||||
EPPB1012S | EPPB1034S | EPPB2012S | EPPB2034S | ||||
EPPB30034S | EPPR10034S | EPPR1012S | EPPR1034S | ||||
EPPR2012S | EPPR2034S | EPPR30012S | EPPR30034S | ||||
EPPW1001 | EPPW10012 | EPPW10034 | EPPW101 | ||||
EPPW1012 | EPPW1034 | EPPW201 | EPPW2012 | ||||
EPPW2034 | EPPW30012 | EPPW30034 | EPPW50034 | ||||
EPPW51 | EPPW512 | EPPW534 | WEPPW5001 | ||||
$ Certified for blue, natural, red, and white without oxygen barrier. * Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ~ Certified for Natural non-barrier single layer tubing for 1/8 - 3" sizes. Certified for red, white, blue 2-layer tubing for 1/2", 5/8", 3/4", 1" sizes only. Certified for red, white, blue, orange, natural 3-layer tubing for 1/2", 5/8", 3/4", 1" sizes only. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [5] PEX 5106 Certified for Red, Blue ,White 2-layer for 1/2", 5/8", 3/4", 1" sizes only. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
|||||||
Tubing! * ^ ¢ +++ [G] |
PEX 5106[4] |
Apollo/TMG/PurePEX/PureLink |
ASTM F876/F877 |
||||
3/8" - 1" |
|||||||
WPPB2012 | WPPB2034 | WPPR2012 | WPPR2034 | ||||
WPPW201 | WPPW2012 | WPPW2034 | |||||
! Certified for natural, red, white and blue without oxygen barrier. Natural - 5006 Red, white, blue - 5006, 5106, 5206 * Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [4] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked with the following fitting system designations: ASTM F1807, ASTM F2159. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
|||||||
Tubing* ^ ¢ +++ [G] |
PEX 5306[4] |
Apollo/TMG/PurePEX/PureLink |
ASTM F876/F877 |
||||
3/8" - 1" | |||||||
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [4] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked with the following fitting system designations: ASTM F1807, ASTM F2159. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
[6] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked with the following fitting system designations: ASTM F1807, ASTM F2159, ASTM F1960, ASTM F2080, F2098.
Product Type | Material Type | Trade Name | Product Standard | ||||
Tubing$ * § |
PEX 5006 |
Apollo/TMG/PurePEX/PureLink |
ASTM F876/F877 |
||||
>= 1/8" SDR 9 |
|||||||
APPOB2512 1/2" | APPOB30012 1/2" | APPOB10034 3/4" | APPOB30034 3/4" | ||||
$ Certified for natural, orange, red, and white with oxygen barrier. * Accepted by NSF for use in residential and commercial construction, including manufactured housing. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
|||||||
Tubing$ * ¢ § |
PEX 5006 |
Apollo/TMG/PurePEX/PureLink |
CSA B137.5 |
||||
>= 1/8" SDR 9 |
|||||||
APPOB2512 1/2" | APPOB30012 1/2" | APPOB10034 3/4" | APPOB30034 3/4" | ||||
$ Certified for natural, orange, red, and white with oxygen barrier. * Accepted by NSF for use in residential and commercial construction, including manufactured housing. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
|||||||
Tubing# * § +++ |
PEX 5006 |
Apollo/TMG/PurePEX/PureLink |
ASTM F876/F877 |
||||
APPOB10012 1/2" | 68PXPOB30012 1/2" | 68PXPOB50012 1/2" | 68PXPOB100012 1/2" | ||||
APPOB1034 3/4" | 68PXPOB30034 3/4" | 68PXPOB50034 3/4" | |||||
# Certified for black, blue, natural, orange, red, and white. * Accepted by NSF for use in residential and commercial construction, including manufactured housing. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). |
|||||||
Tubing# * § +++ |
PEX 5006 |
Apollo/TMG/PurePEX/PureLink |
ASTM F876/F877 |
||||
1/8" - 3" |
|||||||
EPPB30034S | EPPR10034S | EPPR1012S | EPPB2034S | ||||
EPPB2012S | EPPB1034S | EPPB1012S | EPPR2012S | ||||
EPPW534 | EPPW512 | EPPW51 | EPPW50034 | ||||
EPPW30034 | EPPW30012 | EPPR1034S | WEPPW5001 | ||||
EPPR2034S | EPPR30012S | EPPR30034S | EPPW1001 | ||||
EPPW10012 | EPPW10034 | EPPW101 | EPPW1012 | ||||
EPPW1034 | EPPW201 | EPPW2012 | EPPW2034 | ||||
# Certified for black, blue, natural, orange, red, and white. * Accepted by NSF for use in residential and commercial construction, including manufactured housing. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). |
|||||||
Tubing# * § +++ |
PEX 5006 |
Apollo/TMG/PurePEX/PureLink |
CSA B137.5 |
||||
APPOB10012 1/2" | 68PXPOB30012 1/2" | 68PXPOB50012 1/2" | 68PXPOB100012 1/2" | ||||
APPOB1034 3/4" | 68PXPOB30034 3/4" | 68PXPOB50034 3/4" | |||||
# Certified for black, blue, natural, orange, red, and white. * Accepted by NSF for use in residential and commercial construction, including manufactured housing. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). |
|||||||
Tubing# * § +++ [6] |
PEX 5006 |
Apollo/TMG/PurePEX/PureLink |
CSA B137.5 |
||||
1/8" - 3" |
|||||||
EPPB1012S | EPPW101 | EPPW1012 | EPPW1034 | ||||
EPPW201 | EPPW2012 | EPPW2034 | EPPW30012 | ||||
EPPW30034 | EPPW50034 | EPPW51 | EPPW512 | ||||
EPPW534 | WEPPW5001 | EPPB1034S | EPPB2012S | ||||
EPPB2034S | EPPB30034S | EPPR10034S | EPPR1012S | ||||
EPPR1034S | EPPR2012S | EPPR2034S | EPPR30012S | ||||
EPPR30034S | EPPW1001 | EPPW10012 | EPPW10034 | ||||
# Certified for black, blue, natural, orange, red, and white. * Accepted by NSF for use in residential and commercial construction, including manufactured housing. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [6] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked with the following fitting system designations: ASTM F1807, ASTM F2159, ASTM F1960, ASTM F2080, F2098. |
|||||||
Tubing! * ^ § |
PEX 5106 |
Apollo/TMG/PurePEX/PureLink |
ASTM F876/F877 |
||||
1/8" - 6" SDR 9 |
|||||||
WPPB2012 | WPPB2034 | WPPR2012 | WPPR2034 | ||||
WPPW201 | WPPW2034 | WPPW2012 | |||||
! Certified for natural, red, white and blue without oxygen barrier. Natural - 5006 Red, white, blue - 5006, 5106, 5206 * Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
|||||||
Tubing* ^ ¢ +++ [G] |
PEX 5106[3] |
Apollo/TMG/PurePEX/PureLink |
ASTM F876/F877 |
||||
3/8" - 1" |
|||||||
WPPW2034 | WPPW2012 | WPPW201 | WPPB2034 | ||||
WPPR2012 | WPPR2034 | WPPB2012 | |||||
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [3] Certified for the following: 2-layer skinned (Natural PEX – White PE) pipe [PEX 5106]: 3/8", 1/2", 5/8", 3/4" & 1" 2-layer skinned (Natural PEX – Red, White or Blue PE) pipe [PEX 5306]: 3/8", 1/2", 5/8", 3/4" & 1" [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
|||||||
Tubing* ^ ~ ¢ +++ [G] |
PEX 5106[5] |
Apollo/TMG/PurePEX/PureLink |
ASTM F876/F877 |
||||
1/2", 5/8", 3/4", 1" |
|||||||
EPPR2034S | EPPR1034S | EPPR30034S | EPPW1001 | ||||
EPPW10012 | EPPW10034 | EPPW101 | EPPW1012 | ||||
EPPW1034 | EPPW201 | EPPW2012 | EPPW2034 | ||||
EPPW30012 | EPPW30034 | EPPW50034 | EPPW51 | ||||
EPPW512 | EPPW534 | WEPPW5001 | EPPR30012S | ||||
EPPR2012S | EPPB1012S | EPPB1034S | EPPB2012S | ||||
EPPB2034S | EPPB30034S | EPPR10034S | EPPR1012S | ||||
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ~ Certified for Natural non-barrier single layer tubing for 1/8 - 3" sizes. Certified for red, white, blue 2-layer tubing for 1/2", 5/8", 3/4", 1" sizes only. Certified for red, white, blue, orange, natural 3-layer tubing for 1/2", 5/8", 3/4", 1" sizes only. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [5] PEX 5106 Certified for Red, Blue ,White 2-layer for 1/2", 5/8", 3/4", 1" sizes only. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
|||||||
Tubing! * ^ § |
PEX 5106 |
Apollo/TMG/PurePEX/PureLink |
CSA B137.5 |
||||
1/8" - 6" SDR 9 |
|||||||
WPPB2034 | WPPR2012 | WPPR2034 | WPPW201 | ||||
WPPW2012 | WPPW2034 | WPPB2012 | |||||
! Certified for natural, red, white and blue without oxygen barrier. Natural - 5006 Red, white, blue - 5006, 5106, 5206 * Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
|||||||
Tubing& * ^ ~ ¢ +++ [G] |
PEX 5106[3] |
Apollo/TMG/PurePEX/PureLink |
CSA B137.5 |
||||
3/8" - 1" |
|||||||
WPPB2034 | WPPW2034 | WPPW2012 | WPPW201 | ||||
WPPR2034 | WPPR2012 | WPPB2012 | |||||
& Meets the chlorine resistance requirements of ASTM F1281 when tested in accordance with ASTM F2023. * Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ~ Certified for Natural non-barrier single layer tubing for 1/8 - 3" sizes. Certified for red, white, blue 2-layer tubing for 1/2", 5/8", 3/4", 1" sizes only. Certified for red, white, blue, orange, natural 3-layer tubing for 1/2", 5/8", 3/4", 1" sizes only. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [3] Certified for the following: 2-layer skinned (Natural PEX – White PE) pipe [PEX 5106]: 3/8", 1/2", 5/8", 3/4" & 1" 2-layer skinned (Natural PEX – Red, White or Blue PE) pipe [PEX 5306]: 3/8", 1/2", 5/8", 3/4" & 1" [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
|||||||
Tubing* ^ ~ ¢ +++ [G] |
PEX 5106[5] |
Apollo/TMG/PurePEX/PureLink |
CSA B137.5 |
||||
1/2", 5/8", 3/4", 1" |
|||||||
EPPB1012S | EPPB1034S | EPPB2012S | EPPB2034S | ||||
EPPB30034S | EPPR10034S | EPPR1012S | EPPR1034S | ||||
EPPR2012S | EPPR2034S | EPPR30012S | EPPR30034S | ||||
EPPW1001 | EPPW10012 | EPPW10034 | EPPW101 | ||||
EPPW1012 | EPPW1034 | EPPW201 | EPPW2012 | ||||
EPPW2034 | EPPW30012 | EPPW30034 | EPPW50034 | ||||
EPPW51 | EPPW512 | EPPW534 | WEPPW5001 | ||||
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ~ Certified for Natural non-barrier single layer tubing for 1/8 - 3" sizes. Certified for red, white, blue 2-layer tubing for 1/2", 5/8", 3/4", 1" sizes only. Certified for red, white, blue, orange, natural 3-layer tubing for 1/2", 5/8", 3/4", 1" sizes only. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [5] PEX 5106 Certified for Red, Blue ,White 2-layer for 1/2", 5/8", 3/4", 1" sizes only. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
[1] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked with the following fitting system designations: ASTM F1807, ASTM F2159, ASTM F1960, ASTM F2080, F2098. [2] PEX 5106 Certified for Red, Blue ,White 2-layer for 1/2", 5/8", 3/4", 1" sizes only. [4] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked with the following fitting system designations: ASTM F1807, ASTM F2159.
The Mosack Group, Inc. | |
11210 Allen Station Drive | |
Mint Hill, NC 28227 | |
United States | |
704-841-6167 |
Facility : # 1 China
Product Type | Material Type | Trade Name | Product Standard | |||
Pinch Clamp |
PEX |
TMG/PEX TMG |
ASTM F1960 |
|||
EPXS3850JR | ||||||
EPXS38100JR | ||||||
EPXS3850PK | ||||||
EPXS3810PK | ||||||
EPXS38100PK | ||||||
EPXS3825PK | ||||||
Pinch Clamp |
PEX |
TMG/PEX TMG |
ASTM F1960 |
|||
EPXS310PK | ||||||
EPXS35PK | ||||||
Pinch Clamp |
PEX |
TMG/PEX TMG |
ASTM F1960 |
|||
EPXS2125PK | ||||||
EPXS21210PK | ||||||
Pinch Clamp |
PEX |
TMG/PEX TMG |
ASTM F1960 |
|||
EPXS210PK | ||||||
EPXS25PK | ||||||
Pinch Clamp |
PEX |
TMG/PEX TMG |
ASTM F1960 |
|||
EPXS11215PK | ||||||
EPXS11210PK | ||||||
Pinch Clamp |
PEX |
TMG/PEX TMG |
ASTM F1960 |
|||
EPXS1145PK | ||||||
EPXS11410PK | ||||||
Pinch Clamp |
PEX |
TMG/PEX TMG |
ASTM F1960 |
|||
EPXS125PK | ||||||
EPXS110PK | ||||||
EPXS150PK | ||||||
EPXS1100JR | ||||||
EPXS1100PK | ||||||
EPXS150JR | ||||||
Pinch Clamp |
PEX |
TMG/PEX TMG |
ASTM F1960 |
|||
EPXS34100PK | ||||||
EPXS3425PK | ||||||
EPXS3410PK | ||||||
EPXS3450PK | ||||||
EPXS34100JR | ||||||
EPXS3450JR | ||||||
Pinch Clamp |
PEX |
TMG/PEX TMG |
ASTM F1960 |
|||
EPXS5850PK | ||||||
EPXS5810PK | ||||||
EPXS5825PK | ||||||
Pinch Clamp |
PEX |
TMG/PEX TMG |
ASTM F1960 |
|||
EPXS1250PK | ||||||
EPXS12100PK | ||||||
EPXS1250JR | ||||||
EPXS12100JR | ||||||
EPXS1210PK | ||||||
EPXS1225PK | ||||||
Pinch Clamp |
PEX |
TMG/PEX TMG |
CSA B137.5 |
|||
EPXS3850JR | ||||||
EPXS38100PK | ||||||
EPXS38100JR | ||||||
EPXS3850PK | ||||||
EPXS3810PK | ||||||
EPXS3825PK | ||||||
Pinch Clamp |
PEX |
TMG/PEX TMG |
CSA B137.5 |
|||
EPXS12100JR | ||||||
EPXS1250PK | ||||||
EPXS1210PK | ||||||
EPXS1225PK | ||||||
EPXS1250JR | ||||||
EPXS12100PK | ||||||
Pinch Clamp |
PEX |
TMG/PEX TMG |
CSA B137.5 |
|||
EPXS5850PK | ||||||
EPXS5810PK | ||||||
EPXS5825PK | ||||||
Pinch Clamp |
PEX |
TMG/PEX TMG |
CSA B137.5 |
|||
EPXS34100PK | ||||||
EPXS3450JR | ||||||
EPXS34100JR | ||||||
EPXS3450PK | ||||||
EPXS3425PK | ||||||
EPXS3410PK | ||||||
Pinch Clamp |
PEX |
TMG/PEX TMG |
CSA B137.5 |
|||
EPXS125PK | ||||||
EPXS110PK | ||||||
EPXS150PK | ||||||
EPXS1100JR | ||||||
EPXS150JR | ||||||
EPXS1100PK | ||||||
Pinch Clamp |
PEX |
TMG/PEX TMG |
CSA B137.5 |
|||
EPXS11410PK | ||||||
EPXS1145PK | ||||||
Pinch Clamp |
PEX |
TMG/PEX TMG |
CSA B137.5 |
|||
EPXS11215PK | ||||||
EPXS11210PK | ||||||
Pinch Clamp |
PEX |
TMG/PEX TMG |
CSA B137.5 |
|||
EPXS210PK | ||||||
EPXS25PK | ||||||
Pinch Clamp |
PEX |
TMG/PEX TMG |
CSA B137.5 |
|||
EPXS21210PK | ||||||
EPXS2125PK | ||||||
Pinch Clamp |
PEX |
TMG/PEX TMG |
CSA B137.5 |
|||
EPXS310PK | ||||||
EPXS35PK |
The Mosack Group, Inc. | |
11210 Allen Station Drive | |
Mint Hill, NC 28227 | |
United States | |
888-229-2874 |
Facility : Mint Hill, NC
Product Type | Material Type | Trade Name | Product Standard | |||
Tubing^ § ** |
PEX |
Apollo |
ASTM E84 |
|||
1/2", 3/4" | ||||||
^ Flame Spread Index <= 25, Smoke Developed Index <=50 § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. ** Flame Spread Index and Smoke Developed Index based on minimum spacing of 18 inches between tubing runs. Tubing shall be marked [NSF®-fs ASTM E84 FS<=25/SD<=50]. |
Product Type | Material Type | Trade Name | Product Standard | |||
Tubing! * ^ ~ ¢ § ++ [G] |
PEX 5106/5306 |
Apollo |
ASTM F876/F877 |
|||
3/8" - 2" | ||||||
! Certified for blue, natural, red colors. * Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Pipe may have a blue, red or white coating. ~ Pipe may utilize blue, red, or black colored ink on the printline. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. ++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Domestic Hot (140° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Tubing! * ^ ~ ¢ § ++ [1] [G] |
PEX 5106/5306 |
Apollo |
CSA B137.5 |
|||
3/8" - 2" | ||||||
! Certified for blue, natural, red colors. * Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Pipe may have a blue, red or white coating. ~ Pipe may utilize blue, red, or black colored ink on the printline. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. ++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Domestic Hot (140° F). [1] Tubing certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked, as applicable, with the following fitting system designation(s): ASTM F877, ASTM F2159, ASTM F1807, ASTM F1960, ASTM F2098, and ASSE 1061. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Tubing* ¢ § +++ [1] [2] [G] |
PEX 5306 |
Apollo |
ASTM F876/F877 |
|||
3/8" - 1" | ||||||
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [1] Tubing certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked, as applicable, with the following fitting system designation(s): ASTM F877, ASTM F2159, ASTM F1807, ASTM F1960, ASTM F2098, and ASSE 1061. [2] Certified for Red, Blue and White Colors. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Tubing* ¢ § +++ [1] [2] [G] |
PEX 5306 |
Apollo |
CSA B137.5 |
|||
3/8" - 1" | ||||||
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [1] Tubing certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked, as applicable, with the following fitting system designation(s): ASTM F877, ASTM F2159, ASTM F1807, ASTM F1960, ASTM F2098, and ASSE 1061. [2] Certified for Red, Blue and White Colors. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Tubing* ¢ § +++ [1] [2] [G] |
PEX 5306 |
Apollo |
AWWA C904 |
|||
3/8" - 1" | ||||||
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [1] Tubing certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked, as applicable, with the following fitting system designation(s): ASTM F877, ASTM F2159, ASTM F1807, ASTM F1960, ASTM F2098, and ASSE 1061. [2] Certified for Red, Blue and White Colors. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
Facility : Calgary, Alberta, Canada
Product Type | Material Type | Trade Name | Product Standard | |||
Tubing^ § ** |
PEX |
Apollo |
ASTM E84 |
|||
1/2", 3/4" | ||||||
^ Flame Spread Index <= 25, Smoke Developed Index <=50 § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. ** Flame Spread Index and Smoke Developed Index based on minimum spacing of 18 inches between tubing runs. Tubing shall be marked [NSF®-fs ASTM E84 FS<=25/SD<=50]. |
Product Type | Material Type | Trade Name | Product Standard | |||
Tubing! * ^ ~ ¢ § ++ [G] |
PEX 5106/5306 |
Apollo |
ASTM F876/F877 |
|||
3/8" - 2" | ||||||
! Certified for blue, natural, red colors. * Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Pipe may have a blue, red or white coating. ~ Pipe may utilize blue, red, or black colored ink on the printline. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. ++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Domestic Hot (140° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Tubing! * ^ ~ ¢ § ++ [1] [G] |
PEX 5106/5306 |
Apollo |
CSA B137.5 |
|||
3/8" - 2" | ||||||
! Certified for blue, natural, red colors. * Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Pipe may have a blue, red or white coating. ~ Pipe may utilize blue, red, or black colored ink on the printline. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. ++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Domestic Hot (140° F). [1] Tubing certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked, as applicable, with the following fitting system designation(s): ASTM F877, ASTM F2159, ASTM F1807, ASTM F1960, ASTM F2098 and ASSE 1061. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
The Mosack Group, LLC | |
701 Matthews-Mint Hill Road | |
Matthews, NC 28105 | |
United States | |
888-229-2874 | |
704-841-6167 | |
Visit this company's website |
Facility : # 8 USA
Product Type | Material Type | Trade Name | Product Standard | |||
Pipe% & * ^ ¢ § +++ [G] |
PEX 3306 |
Apollo |
ASTM F876/F877 |
|||
1/2" - 2" SDR 9 | ||||||
% Tubing certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked, as applicable, with the following fitting system designation(s): ASTM F877, F1807, F1960, F2080 and F2159. & Product can be Red, White or Blue. * Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Pipe% & * ^ ¢ § +++ [G] |
PEX 3006 |
Apollo |
CSA B137.5 |
|||
1/2" - 2" SDR 9 | ||||||
% Tubing certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked, as applicable, with the following fitting system designation(s): ASTM F877, F1807, F1960, F2080 and F2159. & Product can be Red, White or Blue. * Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
The Mosack Group,Inc | |
701 Matthews Mint Hill ROAd | |
Matthews, NC 28105 | |
United States | |
704-479-6584 | |
Visit this company's website |
Facility : Heibei Province, China
Product Type | Material Type | Trade Name | Product Standard | |||
PEX Ring with Stop |
PEX |
TMG |
ASTM F1960 |
|||
EPXS1225PK | EPXS125PK | EPXS3425PK |
[1]
Product Type | Material Type | Trade Name | Product Standard | |||
PEX Ring with Stop |
PEX |
TMG |
ASTM F1960 |
|||
EPXS1225PK | EPXS125PK | EPXS3425PK |
[1]
Tribal Manufacturing, Inc. | |
450 Leggitt Road | |
Marshall, MI 49068 | |
United States | |
269-781-3901 | |
Visit this company's website |
Facility : Marshall, MI
Product Type | Material Type | Trade Name | Product Standard | ||||
Fitting Components§ |
PEX |
![]() |
ASTM F1960 |
||||
3/8" Ring (F300N3) | 1/2" Ring (F300N4) | 5/8" Ring (F300N5) | 3/4" Ring (F300N6) | ||||
1" Ring (F300N8) | 1 1/4" Ring (F300N10) | 1 1/2" Ring (F300N12) | 2" Ring (F300N16) | ||||
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
|||||||
Fitting Components§ |
PEX |
![]() |
CSA B137.5 |
||||
3/8" Ring (F300N3) | 1/2" Ring (F300N4) | 5/8" Ring (F300N5) | 3/4" Ring (F300N6) | ||||
1" Ring (F300N8) | 1 1/4" Ring (F300N10) | 1 1/2" Ring (F300N12) | 2" Ring (F300N16) | ||||
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
|||||||
Fitting Components§ |
PEX |
Failsafe |
ASTM F1960 |
||||
1/2" Ring (F300N4) | 3/4" Ring (F300N6) | 1" Ring (F300N8) | |||||
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
|||||||
Fitting Components§ |
PEX |
Failsafe |
CSA B137.5 |
||||
1/2" Ring (F300N4) | 3/4" Ring (F300N6) | 1" Ring (F300N8) | |||||
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
*** These components require additional processing in order to be used in a piping system. The use of these components in NSF Certified fittings require written authorization from NSF.
Uponor | ![]() |
5925 148th Street West | |
Apple Valley, MN 55124 | |
United States | |
800-321-4739 | |
952-891-2000 | |
Visit this company's website |
Facility : Apple Valley, MN
Product Type | Material Type | Trade Name | Product Standard | ||||
Pipe* ^ ¢ § +++ [3] [5] [G] |
PEX 5106 |
AquaPEX (Natural) |
ASTM F876/F877 |
||||
1/4" - 3" SDR 9 | |||||||
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [3] Product may or may not bear the U.P. Code mark. [5] May also use the trade names AquaPEX Natural, AquaPEX White, or AquaPEX Clear. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
|||||||
Pipe* ^ ¢ +++ [2] [5] [G] |
PEX 5106 |
AquaPEX (Natural) |
CSA B137.5 |
||||
1/4" - 3" SDR 9 | |||||||
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [2] Tubing certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked, as applicable, with the following fitting system designation(s): ASSE 1061 (3/8" - 2" only), ASTM F1960, ASTM F1807, and ASTM F2098. [5] May also use the trade names AquaPEX Natural, AquaPEX White, or AquaPEX Clear. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
|||||||
Pipe* ^ ¢ § +++ [3] [4] [G] |
PEX 5306 |
AquaPEX (Red or Blue) |
ASTM F876/F877 |
||||
1/2" - 2" SDR 9 | |||||||
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [3] Product may or may not bear the U.P. Code mark. [4] Pipe may be marked PEX 5306, PEX 5206, or PEX 5106. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
|||||||
Pipe* ^ ¢ +++ [1] [4] [G] |
PEX 5306 |
AquaPEX (Red or Blue) |
CSA B137.5 |
||||
1/2" - 2" SDR 9 | |||||||
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [1] Tubing certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked, as applicable, with the following fitting system designation(s): ASSE 1061 (1/2" - 2" only), ASTM F1960, ASTM F1807, and ASTM F2098. [4] Pipe may be marked PEX 5306, PEX 5206, or PEX 5106. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
|||||||
Pipe* ^ ¢ § +++ [3] [G] |
PEX 5306 |
AquaPEX (Red or Blue) |
AWWA C904 |
||||
1/2" - 2" SDR 9 | |||||||
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [3] Product may or may not bear the U.P. Code mark. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
|||||||
Pipe* ^ ¢ § +++ [3] [4] [G] |
PEX 5306 |
ServicePEX (Blue) |
ASTM F876/F877 |
||||
1/2" - 2" SDR 9 | |||||||
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [3] Product may or may not bear the U.P. Code mark. [4] Pipe may be marked PEX 5306, PEX 5206, or PEX 5106. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
|||||||
Pipe* ^ ¢ +++ [1] [4] [G] |
PEX 5306 |
ServicePEX (Blue) |
CSA B137.5 |
||||
1/2" - 2" SDR 9 | |||||||
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [1] Tubing certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked, as applicable, with the following fitting system designation(s): ASSE 1061 (1/2" - 2" only), ASTM F1960, ASTM F1807, and ASTM F2098. [4] Pipe may be marked PEX 5306, PEX 5206, or PEX 5106. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
|||||||
Pipe* ^ ¢ § +++ [3] [G] |
PEX 5306 |
ServicePEX (Blue) |
AWWA C904 |
||||
1/2" - 2" SDR 9 | |||||||
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [3] Product may or may not bear the U.P. Code mark. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
|||||||
Pipe^ ¢ § ** +++ [3] [6] [G] |
PEX 5106 |
ResiPEX™ (Natural) |
ASTM F876/F877 |
||||
1/2" - 1" SDR 9 | |||||||
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. ** Accepted by NSF for use in residential construction, including manufactured housing. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [3] Product may or may not bear the U.P. Code mark. [6] May also use the trade names ResiPEX Natural, ResiPEX White, or ResiPEX Clear. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
|||||||
Pipe^ ¢ ** +++ [1] [6] [G] |
PEX 5106 |
ResiPEX™ (Natural) |
CSA B137.5 |
||||
1/2" - 1" SDR 9 | |||||||
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. ** Accepted by NSF for use in residential construction, including manufactured housing. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [1] Tubing certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked, as applicable, with the following fitting system designation(s): ASSE 1061 (1/2" - 2" only), ASTM F1960, ASTM F1807, and ASTM F2098. [6] May also use the trade names ResiPEX Natural, ResiPEX White, or ResiPEX Clear. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
|||||||
Pipe* ^ ¢ § +++ [3] [G] |
PEX 5106 |
hePEX |
ASTM F876/F877 |
||||
5/16" - 4" SDR 9 | |||||||
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [3] Product may or may not bear the U.P. Code mark. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
|||||||
Pipe* ^ ¢ +++ [2] [G] |
PEX 5106 |
hePEX |
CSA B137.5 |
||||
5/16" - 4" SDR 9 | |||||||
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [2] Tubing certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked, as applicable, with the following fitting system designation(s): ASSE 1061 (3/8" - 2" only), ASTM F1960, ASTM F1807, and ASTM F2098. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
|||||||
Reinforcing Rings¢ [7] [8] |
PEX |
Uponor Logo |
ASTM F1960 |
||||
ProPEX Ring |
|||||||
3/8" (Q4690302) | |||||||
ProPEX Ring with Stop |
|||||||
1/2" (Q4690512/Q4690512R10/Q4690512R50) | 5/8" (Q4690625) | 3/4" (Q4690756/Q4690756R10/Q4690756R30) | 1" (Q4691000/Q4691000R10) | ||||
1 1/4" (Q4691250) | 1 1/2" (Q4691500) | 2" (Q4692000) | 2 1/2" (Q4692500) | ||||
3" (Q4693000) | |||||||
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. [7] Product does not have water contact. [8] Specifically for use with Uponor fittings. |
|||||||
Reinforcing Rings¢ [7] [8] |
PEX |
Uponor Logo |
CSA B137.5 |
||||
ProPEX Ring |
|||||||
3/8" (Q4690302) | |||||||
ProPEX Ring with Stop |
|||||||
1/2" (Q4690512/Q4690512R10/Q4690512R50) | 5/8" (Q4690625) | 3/4" (Q4690756/Q4690756R10/Q4690756R30) | 1" (Q4691000/Q4691000R10) | ||||
1 1/4" (Q4691250) | 1 1/2" (Q4691500) | 2" (Q4692000) | 2 1/2" (Q4692500) | ||||
3" (Q4693000) | |||||||
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. [7] Product does not have water contact. [8] Specifically for use with Uponor fittings. |
Product Type | Material Type | Trade Name | Product Standard | |||
Tubing* ¢ [1] [2] |
PEX 5106 |
AquaPEX Reclaimed Water |
ASTM F876/F877 |
|||
1/2" - 4" SDR 9 | ||||||
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. [1] This product is intended for reclaimed water end use, and is marked "not for potable water" or "nonpotable water". This product has an outer purple coating. [2] Product meets the most current dimensional requirements of ASTM F876. |
||||||
Tubing* ¢ [1] [3] [4] |
PEX |
AquaPEX Reclaimed Water |
CSA B137.5 |
|||
1/2" - 4" SDR 9 | ||||||
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. [1] This product is intended for reclaimed water end use, and is marked "not for potable water" or "nonpotable water". This product has an outer purple coating. [3] Product meets applicable requirements of CSA B128.1. Listing does not preclude onsite inspection, system design and testing of the reclaimed water system. [4] Tubing certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked, as applicable, with the following fitting system designation(s): ASSE 1061 (1/2"-2" only), ASTM F1960, ASTM F1807, and ASTM F2098. |
Product Type | Material Type | Trade Name | Product Standard | ||||
Tubing* ^ ¢ § [1] |
PEX 5106 |
hePEX |
ASTM F876/F877 |
||||
5/16" - 4" | |||||||
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [1] Product may or may not bear the U.P.Code mark. |
|||||||
Tubing* ^ ¢ [2] |
PEX 5106 |
hePEX |
CSA B137.5 |
||||
5/16" - 4" | |||||||
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. [2] Tubing certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked, as applicable, with the following fitting system designation(s): ASTM F1960, ASTM F1807, and ASTM F2098. |
|||||||
Tubing* |
PEX |
EcoFlex |
ASTM F2788 |
||||
110 mm | |||||||
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. |
|||||||
Tubing* @ ¢ [3] |
PEX 0006 |
hePEX |
ASTM F876/F877 |
||||
5/16" | 3/8" | 1/2" | 5/8" | ||||
3/4" | 1" | 1 1/4" | 1 1/2" | ||||
2" | 2 1/2" | 3" | 3 1/2" | ||||
4" | |||||||
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. @ This barrier tubing product has been evaluated against the performance requirement of ASTM F876/F877. This product has been evaluated for use in radiant floor heating. (NSF-rfh), applications only. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. [3] Product meets the most current dimensional requirements of ASTM F876. |
|||||||
Tubing* @ ¢ [4] |
PEX |
hePEX |
CSA B137.5 |
||||
5/16" | 3/8" | 1/2" | 5/8" | ||||
3/4" | 1" | 1 1/4" | 1 1/2" | ||||
2" | 2 1/2" | 3" | 3 1/2" | ||||
4" | |||||||
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. @ This barrier tubing product has been evaluated against the performance requirement of ASTM F876/F877. This product has been evaluated for use in radiant floor heating. (NSF-rfh), applications only. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. [4] Tubing certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked, as applicable, with the following fitting system designation(s): ASSE 1061 (3/8"-2" only), ASTM F1960, ASTM F1807, and ASTM F2098. |
|||||||
Tubing* @ ¢ [3] |
PEX 0006 |
hePEX Plus |
ASTM F876/F877 |
||||
5/16" | 3/8" | 1/2" | 5/8" | ||||
3/4" | 1" | 1 1/4" | 1 1/2" | ||||
2" | 2 1/2" | 3" | 3 1/2" | ||||
4" | |||||||
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. @ This barrier tubing product has been evaluated against the performance requirement of ASTM F876/F877. This product has been evaluated for use in radiant floor heating. (NSF-rfh), applications only. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. [3] Product meets the most current dimensional requirements of ASTM F876. |
|||||||
Tubing* @ ¢ [4] |
PEX |
hePEX Plus |
CSA B137.5 |
||||
5/16" | 3/8" | 1/2" | 5/8" | ||||
3/4" | 1" | 1 1/4" | 1 1/2" | ||||
2" | 2 1/2" | 3" | 3 1/2" | ||||
4" | |||||||
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. @ This barrier tubing product has been evaluated against the performance requirement of ASTM F876/F877. This product has been evaluated for use in radiant floor heating. (NSF-rfh), applications only. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. [4] Tubing certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked, as applicable, with the following fitting system designation(s): ASSE 1061 (3/8"-2" only), ASTM F1960, ASTM F1807, and ASTM F2098. |
|||||||
Tubing* @ § |
PEX 0306 |
helioPEX™ X2 |
ASTM F876/F877 |
||||
5/16" | 3/8" | 1/2" | 5/8" | ||||
3/4" | 1" | 1 1/4" | 1 1/2" | ||||
2" | 2 1/2" | 3" | 3 1/2" | ||||
4" | |||||||
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. @ This barrier tubing product has been evaluated against the performance requirement of ASTM F876/F877. This product has been evaluated for use in radiant floor heating. (NSF-rfh), applications only. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
|||||||
Tubing* @ ¢ [4] |
PEX 0306 |
helioPEX™ X2 |
CSA B137.5 |
||||
5/16" | 3/8" | 1/2" | 5/8" | ||||
3/4" | 1" | 1 1/4" | 1 1/2" | ||||
2" | 2 1/2" | 3" | 3 1/2" | ||||
4" | |||||||
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. @ This barrier tubing product has been evaluated against the performance requirement of ASTM F876/F877. This product has been evaluated for use in radiant floor heating. (NSF-rfh), applications only. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. [4] Tubing certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked, as applicable, with the following fitting system designation(s): ASSE 1061 (3/8"-2" only), ASTM F1960, ASTM F1807, and ASTM F2098. |
Facility : Hutchinson, MN
Product Type | Material Type | Trade Name | Product Standard | |||
Pipe and Fitting System% ¢ ** |
PEX |
AQUASAFE®* |
ANSI/CAN/UL 1821 |
|||
Tubing |
||||||
3/4" Uponor AquaPEX White | 1" Uponor AquaPEX White | |||||
% PEX pipe and fittings are intended for use in multi-purpose piping systems of residential occupancies as defined in ANSI/NFPA 13D, "Installation of Sprinkler Systems in One- and Two- Family Dwellings and Manufactured Homes", the National Building Code of Canada, and the International Residential Code, Section 2904, and are designed to withstand a working pressure of not less than 130 psi at 120° F. PEX pipe and fittings are intended to be installed in accordance with the requirements specified in the manufacturer’s installation instructions and ANSI/NFPA 13D. Protection is intended to be provided for PEX pipe and fittings in multi-purpose piping systems. The minimum protection should consist of either (1) one layer of 3/8-in. gypsum wallboard, (2) a suspended membrane ceiling with lay-in panels or tiles having a weight of not less than 0.35 lbs per sq ft when installed with metallic support grids, (3) 1/2 in plywood or (4) other material with a 15 minute fire rating. PEX pipe and fittings are intended for use in areas where the maximum ambient temperature does not exceed 120° F. These pipe and fittings are not intended to be installed in outdoor applications. The PEX pipe and fittings are intended for use in wet-pipe systems only and have not been evaluated for use in drypipe systems. * These products may also be represented by the trade name AquaPEX. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. ** Pipe and fittings Certified as a system using installation and design manual titled "Uponor Residential Fire Sprinkler Systems, AquaSAFE™ System Installation Guide". |
Product Type | Material Type | Trade Name | Product Standard | |||
Pipe* ^ ¢ § +++ [3] [5] [G] |
PEX 5106 |
AquaPEX (Natural) |
ASTM F876/F877 |
|||
1/4" - 3" SDR 9 | ||||||
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [3] Product may or may not bear the U.P. Code mark. [5] May also use the trade names AquaPEX Natural, AquaPEX White, or AquaPEX Clear. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Pipe* ^ ¢ +++ [2] [5] [G] |
PEX 5106 |
AquaPEX (Natural) |
CSA B137.5 |
|||
1/4" - 3" SDR 9 | ||||||
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [2] Tubing certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked, as applicable, with the following fitting system designation(s): ASSE 1061 (3/8" - 2" only), ASTM F1960, ASTM F1807, and ASTM F2098. [5] May also use the trade names AquaPEX Natural, AquaPEX White, or AquaPEX Clear. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Pipe* ^ ¢ § +++ [3] [4] [G] |
PEX 5306 |
AquaPEX (Red or Blue) |
ASTM F876/F877 |
|||
1/2" - 2" SDR 9 | ||||||
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [3] Product may or may not bear the U.P. Code mark. [4] Pipe may be marked PEX 5306, PEX 5206, or PEX 5106. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Pipe* ^ ¢ +++ [1] [4] [G] |
PEX 5306 |
AquaPEX (Red or Blue) |
CSA B137.5 |
|||
1/2" - 2" SDR 9 | ||||||
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [1] Tubing certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked, as applicable, with the following fitting system designation(s): ASSE 1061 (1/2" - 2" only), ASTM F1960, ASTM F1807, and ASTM F2098. [4] Pipe may be marked PEX 5306, PEX 5206, or PEX 5106. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Pipe* ^ ¢ § +++ [3] [4] [G] |
PEX 5306 |
ServicePEX (Blue) |
ASTM F876/F877 |
|||
1/2" - 2" SDR 9 | ||||||
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [3] Product may or may not bear the U.P. Code mark. [4] Pipe may be marked PEX 5306, PEX 5206, or PEX 5106. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Pipe* ^ ¢ +++ [1] [4] [G] |
PEX 5306 |
ServicePEX (Blue) |
CSA B137.5 |
|||
1/2" - 2" SDR 9 | ||||||
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [1] Tubing certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked, as applicable, with the following fitting system designation(s): ASSE 1061 (1/2" - 2" only), ASTM F1960, ASTM F1807, and ASTM F2098. [4] Pipe may be marked PEX 5306, PEX 5206, or PEX 5106. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Pipe* ^ ¢ § +++ [3] [G] |
PEX 5306 |
ServicePEX (Blue) |
AWWA C904 |
|||
1/2" - 1 1/2" SDR 9 | ||||||
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [3] Product may or may not bear the U.P. Code mark. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Pipe^ ¢ § ** +++ [3] [6] [G] |
PEX 5106 |
ResiPEX™ (Natural) |
ASTM F876/F877 |
|||
1/2" - 2" SDR 9 | ||||||
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. ** Accepted by NSF for use in residential construction, including manufactured housing. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [3] Product may or may not bear the U.P. Code mark. [6] May also use the trade names ResiPEX Natural, ResiPEX White, or ResiPEX Clear [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Pipe^ ¢ § ** +++ [1] [6] [G] |
PEX 5106 |
ResiPEX™ (Natural) |
CSA B137.5 |
|||
1/2" - 2" SDR 9 | ||||||
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. ** Accepted by NSF for use in residential construction, including manufactured housing. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [1] Tubing certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked, as applicable, with the following fitting system designation(s): ASSE 1061 (1/2" - 2" only), ASTM F1960, ASTM F1807, and ASTM F2098. [6] May also use the trade names ResiPEX Natural, ResiPEX White, or ResiPEX Clear [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
Viega LLC. | |
585 Interlocken Boulevard | |
Broomfield, CO 80021 | |
United States | |
800-774-5237 |
Facility : # 1 USA
Product Type | Material Type | Trade Name | Product Standard | |||
Tubing# * ^ ~ ¡ ¢ § ** +++ [2] [G] |
PEX 5306 |
Viega PureFlow PEX |
AWWA C904 |
|||
1/2" - 2" SDR 9 | ||||||
# Pipe tested as a system using VI fittings manufactured by Viega LLC. Installation/assembly instructions titled “Installation Guidelines for Viega Insert Fittings Systems”, most current edition. * Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ~ Formerly Vanex Ultra. ¡ Black solid wall construction. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. ** Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic radiant heating system made in accordance with the current version of the ASTM F877 standard intended for a maximum 100 psi water service and a maximum working temperature of 180°F. System components consist of tubing and/or fittings. To be installed in accordance with manufacturer’s instructions and the latest edition of the Uniform Plumbing Code. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [2] This PEX tubing may also be marked ViegaPEX ULTRA. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Tubing# * @ ^ ~ § ** +++ [3] [G] |
PEX 5306 |
Viega PureFlow PEX |
AWWA C904 |
|||
1/2" - 1 1/2" SDR 9 | ||||||
# Pipe tested as a system using VI fittings manufactured by Viega LLC. Installation/assembly instructions titled “Installation Guidelines for Viega Insert Fittings Systems”, most current edition. * Accepted by NSF for use in residential and commercial construction, including manufactured housing. @ Red, white, or blue solid wall construction. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ~ Formerly Vanex Ultra. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. ** Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic radiant heating system made in accordance with the current version of the ASTM F877 standard intended for a maximum 100 psi water service and a maximum working temperature of 180°F. System components consist of tubing and/or fittings. To be installed in accordance with manufacturer’s instructions and the latest edition of the Uniform Plumbing Code. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [3] This PEX tubing may also be marked ViegaPEX. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Riser Assemblies (PW)* @ ^ § +++ [4] |
PEX |
Viega PureFlow PEX Riser |
ASME A112.18.6/CSA B125.6 |
|||
1/4" CTS O.D., 12" - 72" length | ||||||
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. @ Red, white, or blue solid wall construction. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [4] These Viega PureFlow PEX Risers may also be marked as ViegaPEX Risers. |
||||||
Tubing# $ * ^ ¢ § ++ [5] [G] |
PEX 5306 |
Viega Barrier |
ASTM F876/F877 |
|||
1/4" - 2" SDR 9 | ||||||
# Pipe tested as a system using VI fittings manufactured by Viega LLC. Installation/assembly instructions titled “Installation Guidelines for Viega Insert Fittings Systems”, most current edition. $ This product is barrier tubing. * Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. ++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Domestic Hot (140° F). [5] This PEX tubing may also be marked ViegaPEX Barrier. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Tubing# $ * ^ ¢ § ++ [5] [7] [G] |
PEX 5306 |
Viega Barrier |
CSA B137.5 |
|||
1/4" - 2" SDR 9 | ||||||
# Pipe tested as a system using VI fittings manufactured by Viega LLC. Installation/assembly instructions titled “Installation Guidelines for Viega Insert Fittings Systems”, most current edition. $ This product is barrier tubing. * Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. ++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Domestic Hot (140° F). [5] This PEX tubing may also be marked ViegaPEX Barrier. [7] Tubing certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked, as applicable, with the following fitting system designation(s): ASTM F1807, ASTM F2159, ASTM F3347, ASTM F3348, and ASTM F877. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Tubing* @ ^ § +++ [4] [G] |
PEX 5106 |
Viega PureFlow PEX Riser |
ASTM F876/F877 |
|||
1/4" - 3/8" SDR 9 | ||||||
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. @ Red, white, or blue solid wall construction. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [4] These Viega PureFlow PEX Risers may also be marked as ViegaPEX Risers. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Tubing# * ^ ¡ ¢ § ** +++ [2] [G] |
PEX 5306 |
Viega PureFlow PEX |
ASTM F876/F877 |
|||
3/8" - 2" SDR 9 | ||||||
# Pipe tested as a system using VI fittings manufactured by Viega LLC. Installation/assembly instructions titled “Installation Guidelines for Viega Insert Fittings Systems”, most current edition. * Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¡ Black solid wall construction. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. ** Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic radiant heating system made in accordance with the current version of the ASTM F877 standard intended for a maximum 100 psi water service and a maximum working temperature of 180°F. System components consist of tubing and/or fittings. To be installed in accordance with manufacturer’s instructions and the latest edition of the Uniform Plumbing Code. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [2] This PEX tubing may also be marked ViegaPEX ULTRA. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Tubing# * @ ^ ¢ § ** +++ [3] [G] |
PEX 5306 |
Viega PureFlow PEX |
ASTM F876/F877 |
|||
3/8" - 2" SDR 9 | ||||||
# Pipe tested as a system using VI fittings manufactured by Viega LLC. Installation/assembly instructions titled “Installation Guidelines for Viega Insert Fittings Systems”, most current edition. * Accepted by NSF for use in residential and commercial construction, including manufactured housing. @ Red, white, or blue solid wall construction. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. ** Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic radiant heating system made in accordance with the current version of the ASTM F877 standard intended for a maximum 100 psi water service and a maximum working temperature of 180°F. System components consist of tubing and/or fittings. To be installed in accordance with manufacturer’s instructions and the latest edition of the Uniform Plumbing Code. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [3] This PEX tubing may also be marked ViegaPEX. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Tubing# * ^ ¡ ¢ § ** +++ [2] [7] [G] |
PEX 5306 |
Viega PureFlow PEX |
CSA B137.5 |
|||
3/8" - 2" SDR 9 | ||||||
# Pipe tested as a system using VI fittings manufactured by Viega LLC. Installation/assembly instructions titled “Installation Guidelines for Viega Insert Fittings Systems”, most current edition. * Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¡ Black solid wall construction. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. ** Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic radiant heating system made in accordance with the current version of the ASTM F877 standard intended for a maximum 100 psi water service and a maximum working temperature of 180°F. System components consist of tubing and/or fittings. To be installed in accordance with manufacturer’s instructions and the latest edition of the Uniform Plumbing Code. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [2] This PEX tubing may also be marked ViegaPEX ULTRA. [7] Tubing certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked, as applicable, with the following fitting system designation(s): ASTM F1807, ASTM F2159, ASTM F3347, ASTM F3348, and ASTM F877. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Tubing# * ^ ¢ § ** +++ [3] [7] [G] |
PEX 5306 |
Viega PureFlow PEX |
CSA B137.5 |
|||
3/8" - 2" SDR 9 | ||||||
# Pipe tested as a system using VI fittings manufactured by Viega LLC. Installation/assembly instructions titled “Installation Guidelines for Viega Insert Fittings Systems”, most current edition. * Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. ** Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic radiant heating system made in accordance with the current version of the ASTM F877 standard intended for a maximum 100 psi water service and a maximum working temperature of 180°F. System components consist of tubing and/or fittings. To be installed in accordance with manufacturer’s instructions and the latest edition of the Uniform Plumbing Code. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [3] This PEX tubing may also be marked ViegaPEX. [7] Tubing certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked, as applicable, with the following fitting system designation(s): ASTM F1807, ASTM F2159, ASTM F3347, ASTM F3348, and ASTM F877. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
± Certified for tubing with a black inner layer and red or natural outer layer.
Product Type | Material Type | Trade Name | Product Standard | |||
Tubing# $ * ^ ¢ [5] |
PEX 5306 |
Viega Barrier |
ASTM F3253 |
|||
1/4" - 2" SDR 9 | ||||||
# Pipe tested as a system using VI fittings manufactured by Viega LLC. Installation/assembly instructions titled “Installation Guidelines for Viega Insert Fittings Systems”, most current edition. $ This product is barrier tubing. * Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. [5] This PEX tubing may also be marked ViegaPEX Barrier. |
||||||
Tubing# * ^ ¡ ¢ § ** [2] |
PEX 5306 |
Viega PureFlow PEX |
AWWA C904 |
|||
1/2" - 2" SDR 9 | ||||||
# Pipe tested as a system using VI fittings manufactured by Viega LLC. Installation/assembly instructions titled “Installation Guidelines for Viega Insert Fittings Systems”, most current edition. * Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¡ Black solid wall construction. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. ** Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic radiant heating system made in accordance with the current version of the ASTM F877 standard intended for a maximum 100 psi water service and a maximum working temperature of 180°F. System components consist of tubing and/or fittings. To be installed in accordance with manufacturer’s instructions and the latest edition of the Uniform Plumbing Code™. [2] This PEX tubing may also be marked ViegaPEX ULTRA. |
||||||
Tubing# * @ ^ ¢ § ** [3] |
PEX 5306 |
Viega PureFlow PEX |
AWWA C904 |
|||
1/2" - 1 1/2" SDR 9 | ||||||
# Pipe tested as a system using VI fittings manufactured by Viega LLC. Installation/assembly instructions titled “Installation Guidelines for Viega Insert Fittings Systems”, most current edition. * Accepted by NSF for use in residential and commercial construction, including manufactured housing. @ Red, white, or blue solid wall construction. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. ** Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic radiant heating system made in accordance with the current version of the ASTM F877 standard intended for a maximum 100 psi water service and a maximum working temperature of 180°F. System components consist of tubing and/or fittings. To be installed in accordance with manufacturer’s instructions and the latest edition of the Uniform Plumbing Code™. [3] This PEX tubing may also be marked ViegaPEX. |
||||||
Riser Assemblies (PW)* @ ^ § [4] |
PEX |
Viega PureFlow PEX Riser |
ASME A112.18.6/CSA B125.6 |
|||
1/4" CTS O.D., 12" - 72" length | ||||||
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. @ Red, white, or blue solid wall construction. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [4] These Viega PureFlow PEX Risers may also be marked as ViegaPEX Risers. |
||||||
Tubing# $ * ^ ¢ § [5] |
PEX 5306 |
Viega Barrier |
ASTM F876/F877 |
|||
1/4" - 2" SDR 9 | ||||||
# Pipe tested as a system using VI fittings manufactured by Viega LLC. Installation/assembly instructions titled “Installation Guidelines for Viega Insert Fittings Systems”, most current edition. $ This product is barrier tubing. * Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [5] This PEX tubing may also be marked ViegaPEX Barrier. |
||||||
Tubing# $ * ^ ¢ § [5] [7] |
PEX 5306 |
Viega Barrier |
CSA B137.5 |
|||
1/4" - 2" SDR 9 | ||||||
# Pipe tested as a system using VI fittings manufactured by Viega LLC. Installation/assembly instructions titled “Installation Guidelines for Viega Insert Fittings Systems”, most current edition. $ This product is barrier tubing. * Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [5] This PEX tubing may also be marked ViegaPEX Barrier. [7] Tubing certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked, as applicable, with the following fitting system designation(s): ASTM F1807, ASTM F2159, ASTM F3347, ASTM F3348, and ASTM F877. |
||||||
Tubing* @ ^ § [4] |
PEX 5106 |
Viega PureFlow PEX Riser |
ASTM F876/F877 |
|||
1/4" - 3/8" SDR 9 | ||||||
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. @ Red, white, or blue solid wall construction. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [4] These Viega PureFlow PEX Risers may also be marked as ViegaPEX Risers. |
||||||
Tubing# * ^ ¡ ¢ § ** [2] |
PEX 5306 |
Viega PureFlow PEX |
ASTM F876/F877 |
|||
3/8" - 2" SDR 9 | ||||||
# Pipe tested as a system using VI fittings manufactured by Viega LLC. Installation/assembly instructions titled “Installation Guidelines for Viega Insert Fittings Systems”, most current edition. * Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¡ Black solid wall construction. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. ** Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic radiant heating system made in accordance with the current version of the ASTM F877 standard intended for a maximum 100 psi water service and a maximum working temperature of 180°F. System components consist of tubing and/or fittings. To be installed in accordance with manufacturer’s instructions and the latest edition of the Uniform Plumbing Code™. [2] This PEX tubing may also be marked ViegaPEX ULTRA. |
||||||
Tubing# * @ ^ ¢ § ** [3] |
PEX 5306 |
Viega PureFlow PEX |
ASTM F876/F877 |
|||
3/8" - 2" SDR 9 | ||||||
# Pipe tested as a system using VI fittings manufactured by Viega LLC. Installation/assembly instructions titled “Installation Guidelines for Viega Insert Fittings Systems”, most current edition. * Accepted by NSF for use in residential and commercial construction, including manufactured housing. @ Red, white, or blue solid wall construction. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. ** Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic radiant heating system made in accordance with the current version of the ASTM F877 standard intended for a maximum 100 psi water service and a maximum working temperature of 180°F. System components consist of tubing and/or fittings. To be installed in accordance with manufacturer’s instructions and the latest edition of the Uniform Plumbing Code™. [3] This PEX tubing may also be marked ViegaPEX. |
||||||
Tubing# * ^ ¡ ¢ § ** [2] [7] |
PEX 5306 |
Viega PureFlow PEX |
CSA B137.5 |
|||
3/8" - 2" SDR 9 | ||||||
# Pipe tested as a system using VI fittings manufactured by Viega LLC. Installation/assembly instructions titled “Installation Guidelines for Viega Insert Fittings Systems”, most current edition. * Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¡ Black solid wall construction. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. ** Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic radiant heating system made in accordance with the current version of the ASTM F877 standard intended for a maximum 100 psi water service and a maximum working temperature of 180°F. System components consist of tubing and/or fittings. To be installed in accordance with manufacturer’s instructions and the latest edition of the Uniform Plumbing Code™. [2] This PEX tubing may also be marked ViegaPEX ULTRA. [7] Tubing certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked, as applicable, with the following fitting system designation(s): ASTM F1807, ASTM F2159, ASTM F3347, ASTM F3348, and ASTM F877. |
||||||
Tubing# * @ ^ ¢ § ** [3] [7] |
PEX 5306 |
Viega PureFlow PEX |
CSA B137.5 |
|||
3/8" - 2" SDR 9 | ||||||
# Pipe tested as a system using VI fittings manufactured by Viega LLC. Installation/assembly instructions titled “Installation Guidelines for Viega Insert Fittings Systems”, most current edition. * Accepted by NSF for use in residential and commercial construction, including manufactured housing. @ Red, white, or blue solid wall construction. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. ** Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic radiant heating system made in accordance with the current version of the ASTM F877 standard intended for a maximum 100 psi water service and a maximum working temperature of 180°F. System components consist of tubing and/or fittings. To be installed in accordance with manufacturer’s instructions and the latest edition of the Uniform Plumbing Code™. [3] This PEX tubing may also be marked ViegaPEX. [7] Tubing certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked, as applicable, with the following fitting system designation(s): ASTM F1807, ASTM F2159, ASTM F3347, ASTM F3348, and ASTM F877. |
~ Formerly Vanex Ultra. ± Certified for tubing with a black innner layer and red or natural outer layer.
Waterline Products Co. Limited | |
100 Westcreek Blvd, Unit 2 | |
Brampton, ON L6T 5V7 | |
Canada | |
+1 905 453 2400 |
Facility : # 1 China
Product Type | Material Type | Trade Name | Product Standard | |||
Tubing$ & |
PEX |
Waterline PEX |
CAN/ULC S102.2 |
|||
3/8", 1/2" - 2" |
||||||
Flame Spread Rating <= 25 | Smoke Developed Classification <= 50 | |||||
$ Certified for blue, natural, red, and white without oxygen barrier. & 3/8" tubing (without insulation) shall be marked [cNSF®-fs ULc S102.2 FS <=25/SD <=50]. 1/2" - 2" tubing (with insulation), Flame Spread Index and Smoke Developed Index based on when the tubing is field insulated with JM Microlok HP Hi Performance Fiberglass insulation as per the pipe manufacturer's installation instructions. Tubing shall be Marked [cNSF®-fs ULc S102.2 FS<=25/SD<=50]. |
||||||
Tubing# $ * |
PEX |
Waterline PEX |
ASTM E84 |
|||
3/8", 1/2" - 2" |
||||||
Flame Spread Index <= 25 | Smoke Developed Index <= 50 | |||||
# The Flame Spread Index and Smoke Developed Index for 1/2"-2" tubing are based on when tubing is field insulated with 1/2" JM Microlok HP Hi performance fiberglass insulation as per RIFENG installation instructions. The 3/8" tubing is not insulated. $ Certified for blue, natural, red, and white without oxygen barrier. * Flame Spread Index and Smoke Developed Index based on minimum spacing of 18 inches between tubing runs. Tubing shall be marked [NSF®-fs ASTM E84 FS<=25/SD<=50]. |
Product Type | Material Type | Trade Name | Product Standard | |||
Fittings[1] |
PEX |
Waterline |
ASTM F1960 |
|||
PEX Ring with Stop |
||||||
3/8" - 2" | ||||||
[1] This is a PEX sleeve certified to ASTM F1960 & CSA B137.5. This is a non wetted product. |
||||||
Fittings[1] |
PEX |
Waterline |
CSA B137.5 |
|||
PEX Ring with Stop |
||||||
3/8" - 2" | ||||||
[1] This is a PEX sleeve certified to ASTM F1960 & CSA B137.5. This is a non wetted product. |
||||||
Tubing$ * ^ § +++ [G] |
PEX 5006 |
Waterline PEX |
ASTM F876/F877 |
|||
>=1/8" SDR 9 | ||||||
$ Certified for blue, natural, red, and white without oxygen barrier. * Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Tubing$ * ^ ¢ § +++ [G] |
PEX |
Waterline PEX |
CSA B137.5 |
|||
>=1/8" SDR 9 | ||||||
$ Certified for blue, natural, red, and white without oxygen barrier. * Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
Product Type | Material Type | Trade Name | Product Standard | |||
Fittings[1] |
PEX |
Waterline |
ASTM F1960 |
|||
PEX Ring with Stop |
||||||
3/8" - 2" | ||||||
[1] This is a PEX sleeve certified to ASTM F1960 & CSA B137.5. This is a non wetted product. |
||||||
Fittings[1] |
PEX |
Waterline |
CSA B137.5 |
|||
PEX Ring with Stop |
||||||
3/8" - 2" | ||||||
[1] This is a PEX sleeve certified to ASTM F1960 & CSA B137.5. This is a non wetted product. |
||||||
Tubing$ * § |
PEX 5006 |
Waterline PEX |
ASTM F876/F877 |
|||
>=1/8" SDR 9 | ||||||
$ Certified for natural, orange, red, and white with oxygen barrier. * Accepted by NSF for use in residential and commercial construction, including manufactured housing. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
||||||
Tubing$ * ¢ § |
PEX |
Waterline PEX |
CSA B137.5 |
|||
>=1/8" SDR 9 | ||||||
$ Certified for natural, orange, red, and white with oxygen barrier. * Accepted by NSF for use in residential and commercial construction, including manufactured housing. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
Waterline Products Co. Limited | |
100 Westcreek Boulevard #2 | |
Brampton, ON L6T 5V7 | |
Canada | |
800-361-3773 | |
905-625-9481 | |
Visit this company's website |
Facility : # 1 Canada
Product Type | Material Type | Trade Name | Product Standard | |||
Tubing! * ¢ § ++ [G] |
PEX 5106, PEX 5306 |
ColdX Tubing |
ASTM F876/F877 |
|||
3/8" - 2" | ||||||
! Certified for blue, natural, red colors. * Accepted by NSF for use in residential and commercial construction, including manufactured housing. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. ++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Domestic Hot (140° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Tubing! * ¢ § ++ [1] [G] |
PEX 5106, PEX 5306 |
ColdX Tubing |
CSA B137.5 |
|||
3/8" - 2" | ||||||
! Certified for blue, natural, red colors. * Accepted by NSF for use in residential and commercial construction, including manufactured housing. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. ++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Domestic Hot (140° F). [1] Tubing certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked, as applicable, with the following fitting system designation(s): ASTM F877, ASTM F2159, ASTM F1807, ASTM F1960, and ASTM F2098. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
Waterline Products Co. Ltd. | |
238 Britannia Road East | |
Mississauga, ON L4Z 1S6 | |
Canada | |
905-625-9440 |
Facility : Middlefield, OH
Product Type | Material Type | Trade Name | Product Standard | |||
Tubing# @ ^ ¢ § +++ [G] |
PEX 5106 |
Waterline |
ASTM F876/F877 |
|||
1/8" - 1" SDR 9 | ||||||
# Authorized for gray and white. @ Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Tubing# & @ ¢ +++ [G] |
PEX 5106 |
Waterline |
CSA B137.5 |
|||
1/8" - 1" SDR 9 | ||||||
# Authorized for gray and white. & Tubing Certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked, if applicable, with the following fitting system designations: ASTM F1807, ASTM F2159, ASTM F2098, ASTM F2080, ASSE 1061, and ASTM F1960. @ Accepted by NSF for use in residential and commercial construction, including manufactured housing. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
Product Type | Material Type | Trade Name | Product Standard | |||
Tubing# @ ^ ¢ § |
PEX 5006 |
Waterline |
ASTM F876/F877 |
|||
1/8" - 1" SDR 9 | ||||||
# Authorized for blue, gray, natural, orange, red, and white. @ Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
||||||
Tubing# & @ ¢ |
PEX 5006 |
Waterline |
CSA B137.5 |
|||
1/8" - 1" SDR 9 | ||||||
# Authorized for blue, gray, natural, orange, red, and white. & Tubing Certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked, if applicable, with the following fitting system designations: ASTM F1807, ASTM F2159, ASTM F2098, ASTM F2080, ASSE 1061, and ASTM F1960. @ Accepted by NSF for use in residential and commercial construction, including manufactured housing. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. |
Watts Regulator Co. | |
815 Chestnut Street | |
North Andover, MA 01845 | |
United States | |
417-447-8042 |
Facility : # 3 USA
Product Type | Material Type | Trade Name | Product Standard | |||
Pipe$ * § |
PEX 3006 |
WaterPEXa |
ASTM F876/F877 |
|||
3/8" - 1" SDR 9 | ||||||
$ Non-barrier pipe. * Accepted by NSF for use in residential and commercial construction, including manufactured housing. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
||||||
Pipe$ * ¢ § |
PEX |
WaterPEXa |
CSA B137.5 |
|||
3/8" - 1" SDR 9 | ||||||
$ Non-barrier pipe. * Accepted by NSF for use in residential and commercial construction, including manufactured housing. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
Watts Regulator Company | |
815 Chestnut Street | |
North Andover, MA 01845 | |
United States | |
978-689-6158 |
Facility : Marshall, MI
Product Type | Material Type | Trade Name | Product Standard | ||||
Fitting Components§ |
PEX |
Watts |
ASTM F1960 |
||||
1/2" Ring (PFS3-10) | 3/4" Ring (PFS4-10) | 3/8" Ring (PFS2-10) | 5/8" Ring (PFS6-10) | ||||
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
|||||||
Fitting Components§ |
PEX |
Watts |
CSA B137.5 |
||||
1/2" Ring (PFS3-10) | 3/4" Ring (PFS4-10) | 3/8" Ring (PFS2-10) | 5/8" Ring (PFS6-10) | ||||
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
Watts Regulator Company | |
815 Chestnut Street | |
North Andover, MA 01845 | |
United States | |
978-689-1811 |
Facility : # 1 USA
Product Type | Material Type | Trade Name | Product Standard | |||
Pipe! @ ^ ¢ § +++ [G] |
PEX 5306 |
PlumbFLOW |
ASTM F876/F877 |
|||
1/8" - 2" SDR 9 | ||||||
! Product may or may not bear the NSF U.P. code marking. @ Product available in red, white, blue or natural. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Pipe@ ^ ¢ +++ [G] |
PEX 5306 |
PlumbFLOW |
CSA B137.5 |
|||
1/8" - 2" SDR 9 | ||||||
@ Product available in red, white, blue or natural. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Pipe! @ ^ ¢ § +++ [G] |
PEX 5306 |
RF PEX™ by WATTS |
ASTM F876/F877 |
|||
1/8" – 2" SDR 9 | ||||||
! Product may or may not bear the NSF U.P. code marking. @ Product available in red, white, blue or natural. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Pipe! @ ^ ¢ § +++ [G] |
PEX 5306 |
RF PEX™ by Watts |
AWWA C904 |
|||
1/2" – 1 1/2" SDR 9 | ||||||
! Product may or may not bear the NSF U.P. code marking. @ Product available in red, white, blue or natural. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Pipe@ ^ ¢ § +++ [G] |
PEX 5306 |
RF PEX™ by WATTS |
CSA B137.5 |
|||
1/8" – 2" SDR 9 | ||||||
@ Product available in red, white, blue or natural. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Pipe! @ ^ ¢ § +++ [G] |
PEX 5306 |
WaterPEX |
ASTM F876/F877 |
|||
1/8" - 2" SDR 9 | ||||||
! Product may or may not bear the NSF U.P. code marking. @ Product available in red, white, blue or natural. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Pipe! @ ^ ¢ § +++ [G] |
PEX 5306 |
WaterPEX |
AWWA C904 |
|||
1/2" – 1 1/2" SDR 9 | ||||||
! Product may or may not bear the NSF U.P. code marking. @ Product available in red, white, blue or natural. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Pipe@ ^ ¢ +++ [G] |
PEX 5306 |
WaterPEX |
CSA B137.5 |
|||
1/8" - 2" SDR 9 | ||||||
@ Product available in red, white, blue or natural. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
$ Product is barrier tubing. Red, orange, or gray.
Product Type | Material Type | Trade Name | Product Standard | |||
Pipe! $ ^ ¢ § |
PEX 5006 |
RadiantFLOW |
ASTM F876/F877 |
|||
1/8" - 2" | ||||||
! Product may or may not bear the NSF U.P. code marking. $ Product is barrier tubing. Red, orange, or gray. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
||||||
Pipe$ ^ ¢ |
PEX 5006 |
RadiantFLOW |
CSA B137.5 |
|||
1/8" - 2" | ||||||
$ Product is barrier tubing. Red, orange, or gray. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. |
||||||
Tubing! % ^ § |
PEX 5006 |
RadiantPEX+ (w/O2 Barrier) |
ASTM F876/F877 |
|||
1/8" - 1" | ||||||
! Product may or may not bear the NSF U.P. code marking. % Certified product is orange or natural in color. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
||||||
Tubing% ^ ¢ |
PEX 5006 |
RadiantPEX+ (w/O2 Barrier) |
CSA B137.5 |
|||
1/8" - 1" | ||||||
% Certified product is orange or natural in color. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. |
Watts Regulator Company | |
815 Chestnut Street | |
North Andover, MA 01845-6098 | |
United States | |
978-688-1811 |
Facility : Guangdong, China
Product Type | Material Type | Trade Name | Product Standard | |||
Tubing$ * ^ § +++ [G] |
PEX 5006 |
WaterPEX |
ASTM F876/F877 |
|||
>= 1/8" Sch 9 | ||||||
$ Certified for blue, natural, red, and white without oxygen barrier. * Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Tubing$ * ^ ¢ § +++ [G] |
PEX |
WaterPEX |
CSA B137.5 |
|||
>= 1/8" Sch 9 | ||||||
$ Certified for blue, natural, red, and white without oxygen barrier. * Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
Product Type | Material Type | Trade Name | Product Standard | |||
Tubing$ * ¢ § |
PEX |
WaterPEX |
CSA B137.5 |
|||
>= 1/8" Sch 9 | ||||||
$ Certified for natural, orange, red, and white with oxygen barrier. * Accepted by NSF for use in residential and commercial construction, including manufactured housing. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
||||||
Tubing$ * § |
PEX 5006 |
WaterPEX |
ASTM F876/F877 |
|||
>= 1/8" Sch 9 | ||||||
$ Certified for natural, orange, red, and white with oxygen barrier. * Accepted by NSF for use in residential and commercial construction, including manufactured housing. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
Wavin USA Inc. | |
950 Winter Street | |
South Entrance 1st Floor | |
Waltham, MA 02451 | |
United States | |
800-763-3632 | |
514-735-3632 | |
Visit this company's website |
Facility : Spain
Product Type | Material Type | Trade Name | Product Standard | |||
Pipe* @ ¢ § +++ [G] |
PEX 5106 |
Wavin PEX-A |
ASTM F876/F877 |
|||
3/8" - 2" | ||||||
* Natural (Solid Wall) PEX Pipe Certified 3/8" - 2"sizes. Red, blue, white or orange PEX pipe (2 layer pipe - natural with colored adhesive pipe) certified for 3/8" - 2" sizes. Tubing certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked, as applicable, with the following fitting system designation(s): ASTM F1960, ASTM F1807, ASTM F2159, and ASTM F2098. @ PEX 5106: Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Pipe* @ ¢ § +++ [G] |
PEX 5106 |
Wavin PEX-A |
CSA B137.5 |
|||
3/8" - 2" | ||||||
* Natural (Solid Wall) PEX Pipe Certified 3/8" - 2"sizes. Red, blue, white or orange PEX pipe (2 layer pipe - natural with colored adhesive pipe) certified for 3/8" - 2" sizes. Tubing certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked, as applicable, with the following fitting system designation(s): ASTM F1960, ASTM F1807, ASTM F2159, and ASTM F2098. @ PEX 5106: Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or documentation shipped with the product are Certified.
Product Type | Material Type | Trade Name | Product Standard | |||
Tubing* @ ¢ § |
PEX 5106 |
Wavin PEX-A |
ASTM F876/F877 |
|||
3/8" - 2" | ||||||
* Monowall pipe (natural); Skinned pipe (red, blue, white and orange); and Barrier pipe (red, blue, white and orange) are certified for the following sizes: 3/8", 1/2", 5/8", 3/4", 1", 1-1/4", 1-1/2" & 2". Tubing certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked, as applicable with the following fitting system designation(s): ASTM F1960, ASTM F1807, ASTM F2159, and ASTM F2098. @ This tubing product has been evaluated against the performance requirements of ASTM F876/877 and CSA B137.5. This product is not NSF Certified for use in a potable water distribution system. This product has been evaluated for use in radiant floor heating, (NSF-rfh), applications only. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
||||||
Tubing* @ ¢ § |
PEX 5106 |
Wavin PEX-A |
CSA B137.5 |
|||
3/8" - 2" | ||||||
* Monowall pipe (natural); Skinned pipe (red, blue, white and orange); and Barrier pipe (red, blue, white and orange) are certified for the following sizes: 3/8", 1/2", 5/8", 3/4", 1", 1-1/4", 1-1/2" & 2". Tubing certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked, as applicable with the following fitting system designation(s): ASTM F1960, ASTM F1807, ASTM F2159, and ASTM F2098. @ This tubing product has been evaluated against the performance requirements of ASTM F876/877 and CSA B137.5. This product is not NSF Certified for use in a potable water distribution system. This product has been evaluated for use in radiant floor heating, (NSF-rfh), applications only. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or documentation shipped with the product are Certified.
Weifang Palconn Plastics Technology Co., Ltd. | ![]() |
Yinma Industrial Park, Changyi Town | |
WeiFang City, Shandong Province 261317 | |
China | |
86 139 0636 9120 | |
Visit this company's website |
Facility : Shandong Province, China
Product Type | Material Type | Trade Name | Product Standard | |||
Pipe$ ¢ § +++ [1] [G] |
PEX 5306 |
PALCONN PEX Tubing |
ASTM F876/F877 |
|||
3/8", 1/2", 5/8", 3/4", 1", 1-1/4", 1-1/2", 2" | ||||||
$ Certified for blue, natural, white and red without oxygen barrier. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [1] Certified for PEX solid wall pipe. Natural - PEX5006 Red, White, Blue - PEX 5306 [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Pipe$ ¢ § +++ [1] [G] |
PEX 5306 |
PALCONN PEX Tubing |
CSA B137.5 |
|||
3/8", 1/2", 5/8", 3/4", 1", 1-1/4", 1-1/2", 2" | ||||||
$ Certified for blue, natural, white and red without oxygen barrier. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [1] Certified for PEX solid wall pipe. Natural - PEX5006 Red, White, Blue - PEX 5306 [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
Product Type | Material Type | Trade Name | Product Standard | |||
Pipe# ¢ § +++ |
PEX 5006/5106 |
PALCONN PEX Barrier Tubing |
ASTM F876/F877 |
|||
3/8", 1/2", 5/8", 3/4", 1" | ||||||
# Certified for blue, natural, orange, and red. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). |
||||||
Pipe# ¢ § +++ |
PEX 5006/5106 |
PALCONN PEX Barrier Tubing |
CSA B137.5 |
|||
3/8", 1/2", 5/8", 3/4", 1" | ||||||
# Certified for blue, natural, orange, and red. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). |
Weihai Lianqiao New Material Science & Technology Co., Ltd. | |
No. 8 Shihai Street, Chucun | |
Town, Huan Cui District | |
Weihai, Shandong Province | |
China | |
86 631 569 6087 | |
Visit this company's website |
Facility : Shandong, China
Material Type | End Use | Trade Name | Product Standard |
PEX 5308% § | 1 | LIC XL21001LA/XL21001LB | ASTM F876/F877 |
PEX 5308% § | 1 | LIC XL21001LA/XL21001LB | CSA B137.5 |
% Certified for natural, red, white and blue material. Natural - PEX 5006 Red, White, Blue - PEX 5308 § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
Material Type | End Use | Trade Name | Product Standard |
PEX 5308% § | 1 | LIC XL21001LA/XL21001LB | ASTM F876/F877 |
PEX 5308% § | 1 | LIC XL21001LA/XL21001LB | CSA B137.5 |
% Certified for natural, red, white and blue material. Natural - PEX 5006 Red, White, Blue - PEX 5308 § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
NSF Certified materials and generic ingredients are exempt from bearing an NSF Certification Mark. Certified materials and generic ingredients are identified by the manufacturer name, facility location, and trade designation as shown in the Official Listing.
XPAND | |
9451 Boulevard Langelier | |
Montreal, QC H1P 0A1 | |
Canada | |
514-378-0049 | |
Visit this company's website |
Facility : Barcelona, Spain
Product Type | Material Type | Trade Name | Product Standard | |||
Pipe* ¢ § @ +++ [G] |
PEX 5106 |
XPAND |
ASTM F876/F877 |
|||
3/8" - 2" | ||||||
* Natural (Solid Wall) PEX Pipe Certified 3/8" - 2" sizes. Red, blue, white or orange PEX pipe (2 layer pipe - natural with colored adhesive pipe) certified for 3/8" - 2" sizes. Tubing certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked, as applicable, with the following fitting system designation(s): ASTM F1960, ASTM F1807, ASTM F2159, and ASTM F2098. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. @ PEX 5106: Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Pipe* ¢ § @ +++ [G] |
PEX 5106 |
XPAND |
CSA B137.5 |
|||
3/8" - 2" | ||||||
* Natural (Solid Wall) PEX Pipe Certified 3/8" - 2" sizes. Red, blue, white or orange PEX pipe (2 layer pipe - natural with colored adhesive pipe) certified for 3/8" - 2" sizes. Tubing certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked, as applicable, with the following fitting system designation(s): ASTM F1960, ASTM F1807, ASTM F2159, and ASTM F2098. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. @ PEX 5106: Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
Product Type | Material Type | Trade Name | Product Standard | |||
Tubing* @ ¢ § |
PEX 5106 |
XPAND |
ASTM F876/F877 |
|||
3/8" - 2" | ||||||
* Monowall pipe (natural); Skinned pipe (red, blue, white and orange); and Barrier pipe (red, blue, white and orange) are certified for the following sizes: 3/8", 1/2", 5/8", 3/4", 1", 1-1/4", 1-1/2" & 2". Tubing certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked, as applicable with the following fitting system designation(s): ASTM F1960, ASTM F1807, ASTM F2159, and ASTM F2098. @ This tubing product has been evaluated against the performance requirements of ASTM F876/877 and CSA B137.5. This product is not NSF Certified for use in a potable water distribution system. This product has been evaluated for use in radiant floor heating, (NSF-rfh), applications only. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
||||||
Tubing* @ ¢ § |
PEX 5106 |
XPAND |
CSA B137.5 |
|||
3/8" - 2" | ||||||
* Monowall pipe (natural); Skinned pipe (red, blue, white and orange); and Barrier pipe (red, blue, white and orange) are certified for the following sizes: 3/8", 1/2", 5/8", 3/4", 1", 1-1/4", 1-1/2" & 2". Tubing certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked, as applicable with the following fitting system designation(s): ASTM F1960, ASTM F1807, ASTM F2159, and ASTM F2098. @ This tubing product has been evaluated against the performance requirements of ASTM F876/877 and CSA B137.5. This product is not NSF Certified for use in a potable water distribution system. This product has been evaluated for use in radiant floor heating, (NSF-rfh), applications only. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or documentation shipped with the product are Certified.
Yueqing Dongbo Electromechanical Co., Ltd. | |
Xizhu Industrial Zone Shifan Yueqing | |
Zhejiang 325608 | |
China | |
86 577 6231 2247 |
Facility : Zhejiang, China
Product Type | Material Type | Trade Name | Product Standard | |||
Fittings¢ § [1] |
PEX |
dwb |
ASTM F1960 |
|||
3/8" PEX123 | ||||||
1/2" PEX161 | ||||||
5/8" PEX192 | ||||||
3/4" PEX224 | ||||||
1" PEX288 | ||||||
1 1/4" PEX353 | ||||||
1 1/2" PEX417 | ||||||
2" PEX547 | ||||||
2 1/2" PEX675 | ||||||
3" PEX802 | ||||||
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [1] Product is a non-wetted fitting component. |
||||||
Fittings¢ § [1] |
PEX |
dwb |
CSA B137.5 |
|||
3/8" PEX123 | ||||||
1/2" PEX161 | ||||||
5/8" PEX192 | ||||||
3/4" PEX224 | ||||||
1" PEX288 | ||||||
1 1/4" PEX353 | ||||||
1 1/2" PEX417 | ||||||
2" PEX547 | ||||||
2 1/2" PEX675 | ||||||
3" PEX802 | ||||||
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [1] Product is a non-wetted fitting component. |
Zhejiang Iwiss Electric Co., Ltd. | |
Jiedai Industrial District | |
Chengnan Subdistrict,Yueqing | |
Wenzhou 325699 | |
China | |
86 577 6178 6606 |
Facility : Zhejiang, China
Product Type | Material Type | Trade Name | Product Standard | |||
Fittings¢ § [1] |
PEX |
dwb |
ASTM F1960 |
|||
3/8" PEX123 | ||||||
1/2" PEX161 | ||||||
5/8" PEX192 | ||||||
3/4" PEX224 | ||||||
1" PEX288 | ||||||
1 1/4" PEX353 | ||||||
1 1/2" PEX417 | ||||||
2" PEX547 | ||||||
2 1/2" PEX675 | ||||||
3" PEX802 | ||||||
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [1] Product is a non-wetted fitting component. |
||||||
Fittings¢ § [1] |
PEX |
dwb |
CSA B137.5 |
|||
3/8" PEX123 | ||||||
1/2" PEX161 | ||||||
5/8" PEX192 | ||||||
3/4" PEX224 | ||||||
1" PEX288 | ||||||
1 1/4" PEX353 | ||||||
1 1/2" PEX417 | ||||||
2" PEX547 | ||||||
2 1/2" PEX675 | ||||||
3" PEX802 | ||||||
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [1] Product is a non-wetted fitting component. |
Zurn PEX, Inc. | |
116 Maple Street | |
Commerce, TX 75428 | |
United States | |
903-886-2580 | |
Visit this company's website |
Facility : # 8 China
Product Type | Material Type | Trade Name | Product Standard | |||
Fitting Components# ¢ § +++ |
PEX |
Zurn |
ASTM F1960 |
|||
ZPEX QER2X 3/8" | ||||||
ZPEX QER3X 1/2" | ||||||
ZPEX QER4X 3/4" | ||||||
ZPEX QER5X 1" | ||||||
ZPEX QER6X 1 1/4" | ||||||
ZPEX QER7X 1 1/2" | ||||||
ZPEX QER8X 2" | ||||||
# Zurn rings can only be used with Zurn PEX pipe, Zurn brass F1960 Fittings and Zurn plastic F1960 Fittings. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). |
||||||
Fitting Components# ¢ § +++ |
PEX |
Zurn |
CSA B137.5 |
|||
ZPEX QER2X 3/8" | ||||||
ZPEX QER3X 1/2" | ||||||
ZPEX QER4X 3/4" | ||||||
ZPEX QER5X 1" | ||||||
ZPEX QER6X 1 1/4" | ||||||
ZPEX QER7X 1 1/2" | ||||||
ZPEX QER8X 2" | ||||||
# Zurn rings can only be used with Zurn PEX pipe, Zurn brass F1960 Fittings and Zurn plastic F1960 Fittings. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). |
Facility : Harborcreek, PA
Product Type | Material Type | Trade Name | Product Standard | |||
Tubing^ ¢ § +++ [G] |
PEX 5306 |
ACCUTEK PEX - Blue, Red, White |
ASTM F876/F877 |
|||
1/8" - 2" SDR 9 | ||||||
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM 2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Tubing^ ¢ § +++ [G] |
PEX 5306 |
ACCUTEK PEX - Blue, Red, White |
AWWA C904 |
|||
1/2" - 2" SDR 9 | ||||||
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM 2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Tubing# ^ ¢ § +++ [G] |
PEX |
ACCUTEK PEX - Blue, Red, White |
CSA B137.5 |
|||
1/8" - 2" SDR 9 | ||||||
# Tubing certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked, as applicable, with the following fitting system designation(s): ASTM F1807, ASTM F2159, ASTM F1960, and ASTM F2098. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM 2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Tubing^ ¢ § +++ [G] |
PEX 5306 |
CAST Fast-Fit - Blue, Red, White |
ASTM F876/F877 |
|||
1/8" - 2" SDR 9 | ||||||
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM 2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Tubing^ ¢ § +++ [G] |
PEX 5306 |
CAST Fast-Fit - Blue, Red, White |
AWWA C904 |
|||
1/2" - 2" SDR 9 | ||||||
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM 2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Tubing# ^ ¢ § +++ [G] |
PEX |
CAST Fast-Fit - Blue, Red, White |
CSA B137.5 |
|||
1/8" - 2" SDR 9 | ||||||
# Tubing certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked, as applicable, with the following fitting system designation(s): ASTM F1807, ASTM F2159, ASTM F1960, and ASTM F2098. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM 2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Tubing^ ¢ § +++ [G] |
PEX 5306 |
QEST®PEX - Blue, Red, White |
ASTM F876/F877 |
|||
1/8" - 2" | ||||||
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM 2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Tubing^ ¢ § +++ [G] |
PEX 5306 |
QEST®PEX - Blue, Red, White |
AWWA C904 |
|||
1/2" - 2" | ||||||
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM 2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Tubing# ^ ¢ § +++ [G] |
PEX |
QEST®PEX - Blue, Red, White |
CSA B137.5 |
|||
1/8" - 2" | ||||||
# Tubing certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked, as applicable, with the following fitting system designation(s): ASTM F1807, ASTM F2159, ASTM F1960, and ASTM F2098. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM 2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Tubing^ ¢ § +++ [G] |
PEX 5306 |
WarmPex - Red |
ASTM F876/F877 |
|||
1/8" - 2" | ||||||
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM 2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Tubing^ ¢ § +++ [G] |
PEX 5306 |
WarmPex - Red |
AWWA C904 |
|||
1/2" - 2" | ||||||
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM 2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Tubing# ^ ¢ § +++ [G] |
PEX |
WarmPex - Red |
CSA B137.5 |
|||
1/8" - 2" | ||||||
# Tubing certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked, as applicable, with the following fitting system designation(s): ASTM F1807, ASTM F2159, ASTM F1960, and ASTM F2098. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM 2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Tubing^ ¢ § +++ [G] |
PEX 5306 |
ZURNPEX - Blue, Red, White |
ASTM F876/F877 |
|||
1/8" - 2" | ||||||
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM 2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Tubing^ ¢ § +++ [G] |
PEX 5306 |
ZURNPEX - Blue, Red, White |
AWWA C904 |
|||
1/2" - 2" | ||||||
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM 2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Tubing# ^ ¢ § +++ [G] |
PEX |
ZURNPEX - Blue, Red, White |
CSA B137.5 |
|||
1/8" - 2" | ||||||
# Tubing certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked, as applicable, with the following fitting system designation(s): ASTM F1807, ASTM F2159, ASTM F1960, and ASTM F2098. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM 2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
Product Type | Material Type | Trade Name | Product Standard | |||
Tubing# |
PEX 0006 |
ACCUTEK PEX - Blue, Natural, Red, White |
SE 8221 |
|||
3/8" - 1" | ||||||
# Pipe Certified as a system using QEST®PEX fittings manufactured by ZurnPex Inc. Installation/assembly instructions titled "QEST®PEX Professional PEX Plumbing System Installation Guide", dated September 1995. |
||||||
Tubing# |
PEX 0006 |
QEST®PEX Hydronic Barrier-Blue, Red, Natural |
SE 8221 |
|||
3/8" - 1" | ||||||
# Pipe Certified as a system using QEST®PEX fittings manufactured by ZurnPex Inc. Installation/assembly instructions titled "QEST®PEX Professional PEX Plumbing System Installation Guide", dated September 1995. |
||||||
Tubing# |
PEX 0006 |
Slant/Fin Terra Therma |
SE 8221 |
|||
3/8" - 1" | ||||||
# Pipe Certified as a system using QEST®PEX fittings manufactured by ZurnPex Inc. Installation/assembly instructions titled "QEST®PEX Professional PEX Plumbing System Installation Guide", dated September 1995. |
||||||
Tubing# |
PEX 0006 |
WarmPex - Red |
SE 8221 |
|||
3/8" - 1" | ||||||
# Pipe Certified as a system using QEST®PEX fittings manufactured by ZurnPex Inc. Installation/assembly instructions titled "QEST®PEX Professional PEX Plumbing System Installation Guide", dated September 1995. |
||||||
Tubing# |
PEX 0006 |
ZURNPEX Hydronic Barrier - Blue, Red, Natural |
SE 8221 |
|||
3/8" - 1" | ||||||
# Pipe Certified as a system using QEST®PEX fittings manufactured by ZurnPex Inc. Installation/assembly instructions titled "QEST®PEX Professional PEX Plumbing System Installation Guide", dated September 1995. |
||||||
Tubing# |
PEX 0006 |
Zurn PEX Performa |
SE 8221 |
|||
3/8" - 1" | ||||||
# Pipe Certified as a system using QEST®PEX fittings manufactured by ZurnPex Inc. Installation/assembly instructions titled "QEST®PEX Professional PEX Plumbing System Installation Guide", dated September 1995. |
Facility : Commerce, TX
Product Type | Material Type | Trade Name | Product Standard | |||
Pipe and Fitting System% ** [G] |
PEX |
Zurn PEX Fire Protection System |
ANSI/CAN/UL 1821 |
|||
Tubing |
||||||
1" White ZurnPEX | ||||||
% PEX pipe and fittings are intended for use in multi-purpose piping systems of residential occupancies as defined in ANSI/NFPA 13D, "Installation of Sprinkler Systems in One- and Two- Family Dwellings and Manufactured Homes" and the International Residential Code, Section 2904, and are designed to withstand a working pressure of not less than 130 psi at 120° F. PEX pipe and fittings are intended to be installed in accordance with the requirements specified in the manufacturer’s installation instructions and ANSI/NFPA 13D. Protection is intended to be provided for PEX pipe and fittings in multi-purpose piping systems. The minimum protection should consist of either (1) one layer of 3/8-in. gypsum wallboard, (2) a suspended membrane ceiling with lay-in panels or tiles having a weight of not less than 0.35 lbs per sq ft when installed with metallic support grids, (3) 1/2 in plywood or (4) other material with a 15 minute fire rating. PEX pipe and fittings are intended for use in areas where the maximum ambient temperature does not exceed 120° F. These pipe and fittings are not intended to be installed in outdoor applications. The PEX pipe and fittings are intended for use in wet-pipe systems only and have not been evaluated for use in dry-pipe systems. ** Pipe and fittings Certified as a system using Installation/assembly instructions titled "Zurn PEX Residential Fire Protection Addendum to Plumbing Installation Guide", dated October 2010. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
Product Type | Material Type | Trade Name | Product Standard | |||
Tubing^ ¢ § +++ [G] |
PEX 5306 |
ACCUTEK PEX - Blue, Red, White |
ASTM F876/F877 |
|||
1/8” – 2” SDR 9 | ||||||
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM 2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Tubing^ ¢ § +++ [G] |
PEX 5306 |
ACCUTEK PEX - Blue, Red, White |
AWWA C904 |
|||
1/2" – 1 1/4" SDR 9 | ||||||
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM 2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Tubing^ ¢ § +++ [G] |
PEX |
ACCUTEK PEX - Blue, Red, White |
CSA B137.5 |
|||
1/8” – 2" SDR 9 | ||||||
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM 2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Tubing^ ¢ § +++ [G] |
PEX 5306 |
CAST Fast-Fit - Blue, Red, White |
ASTM F876/F877 |
|||
1/8” – 2” SDR 9 | ||||||
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM 2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Tubing^ ¢ § +++ [G] |
PEX 5306 |
CAST Fast-Fit - Blue, Red, White |
AWWA C904 |
|||
1/2" – 1 1/4" SDR 9 | ||||||
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM 2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Tubing^ ¢ § +++ [G] |
PEX |
CAST Fast-Fit - Blue, Red, White |
CSA B137.5 |
|||
1/8” – 2” SDR 9 | ||||||
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM 2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Tubing^ ¢ § +++ [G] |
PEX 5306 |
QEST®PEX - Blue, Red, White |
ASTM F876/F877 |
|||
1/8” – 2” SDR 9 | ||||||
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM 2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Tubing^ ¢ § +++ [G] |
PEX 5306 |
QEST®PEX - Blue, Red, White |
AWWA C904 |
|||
1/2" – 1 1/4" SDR 9 | ||||||
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM 2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Tubing^ ¢ § +++ [G] |
PEX |
QEST®PEX - Blue, Red, White |
CSA B137.5 |
|||
1/8” – 2” SDR 9 | ||||||
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM 2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Tubing^ ¢ § +++ [G] |
PEX 5306 |
WarmPEX - Red |
ASTM F876/F877 |
|||
1/8” – 2" SDR 9 | ||||||
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM 2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Tubing^ ¢ § +++ [G] |
PEX 5306 |
WarmPEX – Red |
AWWA C904 |
|||
1/2" – 1 1/4" SDR 9 | ||||||
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM 2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Tubing^ ¢ § +++ [G] |
PEX |
WarmPEX - Red |
CSA B137.5 |
|||
1/8” – 2” SDR 9 | ||||||
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM 2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Tubing^ ¢ § +++ [G] |
PEX 5306 |
ZURNPEX - Blue, Red, White |
ASTM F876/F877 |
|||
1/8” – 2” | ||||||
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM 2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Tubing^ ¢ § +++ [G] |
PEX 5306 |
ZURNPEX - Blue, Red, White |
AWWA C904 |
|||
1/2" – 1 1/4" SDR 9 | ||||||
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM 2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Tubing# ^ ¢ § +++ [G] |
PEX |
ZURNPEX - Blue, Red, White |
CSA B137.5 |
|||
1/8” – 2” SDR 9 | ||||||
# Pipe tested as a system using QEST®PEX fittings manufactured by United States Brass Corporation. Installation/assembly instructions titled "QEST®PEX Professional PEX Plumbing System Installation Guide", dated September 1995. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM 2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
Zurn PEX, Inc. | |
116 Maple Street | |
Commerce, TX 75428 | |
United States | |
903-886-2580 | |
Visit this company's website |
Facility : # 1 Canada
Product Type | Material Type | Trade Name | Product Standard | |||
Tubing$ ? @ ^ ~ § +++ [G] |
PEX 5306 |
Zurn PEX |
ASTM F876/F877 |
|||
1/4" - 2" SDR 9 | ||||||
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic radiant heating system made in accordance with the current version of the ASTM F877 standard intended for a maximum 100 psi water service and a maximum working temperature of 180°F. System components consist of tubing and/or fittings. To be installed in accordance with manufacturer’s instructions and the latest edition of the Uniform Plumbing Code™. ? The UV material type 5306 is only applicable to the red, white, light blue and blue pipe. @ Certified for red, blue, white and natural colors. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ~ Accepted by NSF for use in residential and commercial construction, including manufactured housing. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Tubing? @ ^ ~ § +++ [G] |
PEX 5306 |
Zurn PEX |
AWWA C904 |
|||
1/2" - 2" SDR 9 | ||||||
? The UV material type 5306 is only applicable to the red, white, light blue and blue pipe. @ Certified for red, blue, white and natural colors. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ~ Accepted by NSF for use in residential and commercial construction, including manufactured housing. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Tubing$ ? @ ^ ~ ¢ § +++ [1] [G] |
PEX 5306 |
Zurn PEX |
CSA B137.5 |
|||
1/4" - 2" SDR 9 | ||||||
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic radiant heating system made in accordance with the current version of the ASTM F877 standard intended for a maximum 100 psi water service and a maximum working temperature of 180°F. System components consist of tubing and/or fittings. To be installed in accordance with manufacturer’s instructions and the latest edition of the Uniform Plumbing Code™. ? The UV material type 5306 is only applicable to the red, white, light blue and blue pipe. @ Certified for red, blue, white and natural colors. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ~ Accepted by NSF for use in residential and commercial construction, including manufactured housing. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [1] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked, as applicable, with the following fitting system designation(s): ASTM F1807, ASTM F2159, ASSE 1061. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
Number of matching Manufacturers is 93
Number of matching Products is 4066
Processing time was 5 seconds