* Natural (Solid Wall) PEX Pipe Certified 3/8" - 2" sizes. Red, blue, white or orange PEX
  pipe (2 layer pipe - natural with colored adhesive pipe) certified for 3/8" - 1" sizes.
  Tubing certified against CSA B137.5 shall include the standard designation(s) of the
  fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
  marked, as applicable, with the following fitting system designation(s): ASTM F1960,
  ASTM F1807, ASTM F2159, and ASTM F2098.
@ PEX 5106: Meets the chlorine resistance requirements of ASTM F876 when tested in
  accordance with ASTM F2023.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

* Natural (Solid Wall) PEX Pipe Certified 3/8" - 2" sizes. Red, blue, white or orange PEX
  pipe (2 layer pipe - natural with colored adhesive pipe) certified for 3/8" - 1" sizes.
  Tubing certified against CSA B137.5 shall include the standard designation(s) of the
  fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
  marked, as applicable, with the following fitting system designation(s): ASTM F1960,
  ASTM F1807, ASTM F2159, and ASTM F2098.
@ PEX 5106: Meets the chlorine resistance requirements of ASTM F876 when tested in
  accordance with ASTM F2023.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

* Monowall pipe (natural); Skinned pipe (red, blue, white and orange); and Barrier pipe
  (red, blue,white and orange) are certified for the following sizes: 3/8", 1/2", 5/8",
  3/4", 1'', 1 1/2", & 2".
  
  Tubing certified against CSA B137.5 shall include the standard designation(s) of the
  fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
  marked, as applicable with the following fitting system designation(s): ASTM F1960, ASTM
  F1807, ASTM F2159, and ASTM F2098.
@ This tubing product has been evaluated against the performance requirements of ASTM
  F876/877 and CSA B137.5.  This product is not NSF Certified for use in a potable water
  distribution system.  This product has been evaluated for use in radiant floor heating,
  (NSF-rfh),	applications only.				
  
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.

* Monowall pipe (natural); Skinned pipe (red, blue, white and orange); and Barrier pipe
  (red, blue,white and orange) are certified for the following sizes: 3/8", 1/2", 5/8",
  3/4", 1'', 1 1/2", & 2".
  
  Tubing certified against CSA B137.5 shall include the standard designation(s) of the
  fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
  marked, as applicable with the following fitting system designation(s): ASTM F1960, ASTM
  F1807, ASTM F2159, and ASTM F2098.
@ This tubing product has been evaluated against the performance requirements of ASTM
  F876/877 and CSA B137.5.  This product is not NSF Certified for use in a potable water
  distribution system.  This product has been evaluated for use in radiant floor heating,
  (NSF-rfh),	applications only.				
  
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.

* Monowall pipe (natural); Skinned pipe (red, blue, white and orange) and Skinned (black
  plus red, blue, white, or orange) are certified for the following sizes: 3/8", 1/2",
  5/8", 3/4", 1", 1-1/4", 1-1/2" & 2"
@ PEX 5106: Meets the chlorine resistance requirements of ASTM F876 when tested in
  accordance with ASTM F2023. 
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

* Monowall pipe (natural); Skinned pipe (red, blue, white and orange) and Skinned (black
  plus red, blue, white, or orange) are certified for the following sizes: 3/8", 1/2",
  5/8", 3/4", 1", 1-1/4", 1-1/2" & 2"
@ PEX 5106: Meets the chlorine resistance requirements of ASTM F876 when tested in
  accordance with ASTM F2023. 
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

* Monowall pipe (natural); Skinned pipe (red, blue, white and orange); Skinned (black plus
  red, blue, white, or orange), and Barrier pipe (red, blue, white and orange) are
  certified for the following sizes: 3/8", 1/2", 5/8", 3/4", 1", 1-1/4", 1-1/2" & 2".
    
  Tubing certified against CSA B137.5 shall include the standard designation(s) of the
  fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
  marked, as applicable with the following fitting system designation(s): ASTM F1960, ASTM
  F1807, ASTM F2159, and ASTM F2098.
@ This tubing product has been evaluated against the performance requirements of ASTM
  F876/877 and CSA B137.5.  This product is not NSF Certified for use in a potable water
  distribution system.  This product has been evaluated for use in radiant floor heating,
  (NSF-rfh), applications only.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.

* Monowall pipe (natural); Skinned pipe (red, blue, white and orange); Skinned (black plus
  red, blue, white, or orange), and Barrier pipe (red, blue, white and orange) are
  certified for the following sizes: 3/8", 1/2", 5/8", 3/4", 1", 1-1/4", 1-1/2" & 2".
    
  Tubing certified against CSA B137.5 shall include the standard designation(s) of the
  fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
  marked, as applicable with the following fitting system designation(s): ASTM F1960, ASTM
  F1807, ASTM F2159, and ASTM F2098.
@ This tubing product has been evaluated against the performance requirements of ASTM
  F876/877 and CSA B137.5.  This product is not NSF Certified for use in a potable water
  distribution system.  This product has been evaluated for use in radiant floor heating,
  (NSF-rfh), applications only.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.

$ Certified for natural, orange, red, and white with oxygen barrier.
* Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.

$ Certified for natural, orange, red, and white with oxygen barrier.
* Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
[1]  Tubing Certified against CSA B137.5 shall include the standard designation(s) of the
     fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
     marked with the following fitting system designations:  ASTM F1807, ASTM F2159, ASTM
     F1960, F2098.

* Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
~  Certified for Natural non-barrier single layer tubing for 1/8 - 3" sizes. Certified for
   red, white, blue 2-layer tubing for 1/2", 5/8", 3/4", 1" sizes only.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

* Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
~  Certified for Natural non-barrier single layer tubing for 1/8 - 3" sizes. Certified for
   red, white, blue 2-layer tubing for 1/2", 5/8", 3/4", 1" sizes only.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    
[1]  Tubing Certified against CSA B137.5 shall include the standard designation(s) of the
     fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
     marked with the following fitting system designations:  ASTM F1807, ASTM F2159, ASTM
     F1960, F2098.

* Monowall pipe (natural), Skinned pipe (red, blue, white and orange), and Skinned (black
  plus red, blue, white, or orange) are certified for the following sizes: 3/8", 1/2",
  5/8", 3/4", 1", 1-1/4", 1-1/2" and 2". Tubing certified against CSA B137.5 shall include
  the standard designation(s) of the fitting system(s)
  for which the tubing is recommended by the manufacturer, and shall be marked, as
  applicable with the following fitting system designation(s): ASTM F1960, ASTM F1807,
  ASTM F2159, and ASTM F2098.
@ PEX 5106: Meets the chlorine resistance requirements of ASTM F876 when tested in
  accordance with ASTM F2023.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

* Monowall pipe (natural), Skinned pipe (red, blue, white and orange), and Skinned (black
  plus red, blue, white, or orange) are certified for the following sizes: 3/8", 1/2",
  5/8", 3/4", 1", 1-1/4", 1-1/2" and 2". Tubing certified against CSA B137.5 shall include
  the standard designation(s) of the fitting system(s)
  for which the tubing is recommended by the manufacturer, and shall be marked, as
  applicable with the following fitting system designation(s): ASTM F1960, ASTM F1807,
  ASTM F2159, and ASTM F2098.
@ PEX 5106: Meets the chlorine resistance requirements of ASTM F876 when tested in
  accordance with ASTM F2023.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

* Monowall pipe (natural); Skinned pipe (red, blue, white and orange); Skinned (black plus
  red, blue, white, or orange), and Barrier pipe (red, blue, white and orange) are
  certified for the following sizes: 3/8", 1/2", 5/8", 3/4", 1", 1-1/4", 1-1/2" & 2".
  
  Tubing certified against CSA B137.5 shall include the standard designation(s) of the
  fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
  marked, as applicable with the following fitting system designation(s): ASTM F1960, ASTM
  F1807, ASTM F2159, and ASTM F2098.
@ This tubing product has been evaluated against the performance requirements of
  ASTM	F876/877 and CSA B137.5.  This product is not NSF Certified for use in a potable
  water distribution system.  This product has been evaluated for use in radiant floor
  heating, (NSF-rfh), applications only.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.

* Monowall pipe (natural); Skinned pipe (red, blue, white and orange); Skinned (black plus
  red, blue, white, or orange), and Barrier pipe (red, blue, white and orange) are
  certified for the following sizes: 3/8", 1/2", 5/8", 3/4", 1", 1-1/4", 1-1/2" & 2".
  
  Tubing certified against CSA B137.5 shall include the standard designation(s) of the
  fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
  marked, as applicable with the following fitting system designation(s): ASTM F1960, ASTM
  F1807, ASTM F2159, and ASTM F2098.
@ This tubing product has been evaluated against the performance requirements of
  ASTM	F876/877 and CSA B137.5.  This product is not NSF Certified for use in a potable
  water distribution system.  This product has been evaluated for use in radiant floor
  heating, (NSF-rfh), applications only.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.

# Meets the chlorine resistance requirements of CC3 in Table 2 of ASTM D3350 when tested
  in accordance with ASTM F2263.
* Use of this material in NSF Certified tubing requires NSF's prior authorization.  Tubing
  produced from this material was tested to the performance requirements of ASTM F876.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

* Use of this material in NSF Certified tubing requires NSF's prior authorization.  Tubing
  produced from this material was tested to the performance requirements of ASTM F876.

# Certified Bowpex tubing is natural, red, blue or white.
[1] Flame Spread Index <=25, Smoke Developed Index <=50.
    Flame Spread Index and Smoke Developed Index for ASTM E84 is based on minimum spacing of
    18 inches between tubing runs.  Tubing shall be marked [cNSFus® fs ASTM E84 ULC S102.2
    FS25/SD50].

# Certified Bowpex tubing is natural, red, blue or white.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[2] Flame Spread Value <=25, Smoke Developed Value <=50.
    Tubing shall be marked [cNSFus® fs ASTM E84 ULC S102.2 FS25/SD50].

# Certified Bowpex tubing is natural, red, blue or white.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[3] Flame Spread Value <=25, Smoke Developed Value <=50.
    The Flame Spread Value and Smoke Developed Value is based on when tubing is field
    insulated with 1/2" JM  Microlok HP Hi performance fiberglass insulation as per Bow
    installation instructions.   Tubing shall be marked [cNSF®-fs ULCS102.2 FS25/SD50].

% Certified Oxypex tubing has a red outer layer.
[1] Flame Spread Index <=25, Smoke Developed Index <=50.
    Flame Spread Index and Smoke Developed Index for ASTM E84 is based on minimum spacing of
    18 inches between tubing runs.  Tubing shall be marked [cNSFus® fs ASTM E84 ULC S102.2
    FS25/SD50].

% Certified Oxypex tubing has a red outer layer.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[2] Flame Spread Value <=25, Smoke Developed Value <=50.
    Tubing shall be marked [cNSFus® fs ASTM E84 ULC S102.2 FS25/SD50].

% Certified Oxypex tubing has a red outer layer.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[3] Flame Spread Value <=25, Smoke Developed Value <=50.
    The Flame Spread Value and Smoke Developed Value is based on when tubing is field
    insulated with 1/2" JM  Microlok HP Hi performance fiberglass insulation as per Bow
    installation instructions.   Tubing shall be marked [cNSF®-fs ULCS102.2 FS25/SD50].

@ Certified Bow Superpex tubing has a blue, red, or white outer layer.
[1] Flame Spread Index <=25, Smoke Developed Index <=50.
    Flame Spread Index and Smoke Developed Index for ASTM E84 is based on minimum spacing of
    18 inches between tubing runs.  Tubing shall be marked [cNSFus® fs ASTM E84 ULC S102.2
    FS25/SD50].

@ Certified Bow Superpex tubing has a blue, red, or white outer layer.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[2] Flame Spread Value <=25, Smoke Developed Value <=50.
    Tubing shall be marked [cNSFus® fs ASTM E84 ULC S102.2 FS25/SD50].

@ Certified Bow Superpex tubing has a blue, red, or white outer layer.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[3] Flame Spread Value <=25, Smoke Developed Value <=50.
    The Flame Spread Value and Smoke Developed Value is based on when tubing is field
    insulated with 1/2" JM  Microlok HP Hi performance fiberglass insulation as per Bow
    installation instructions.   Tubing shall be marked [cNSF®-fs ULCS102.2 FS25/SD50].

! Product may or may not bear the NSF U.P. code marking.
$ Certified Bowpex tubing is natural (PEX 5106), red, white, and blue (PEX 5306).
& Tubing Certified against ASTM F876 and CSA B137.5 shall include the standard
  designation(s) of the fitting
  system(s) for which the tubing is recommended by the manufacturer, and shall be marked
  with the
  following fitting system designations: ASTM F1807, ASTM F2159.
* Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
   temperatures up to and including Domestic Hot (140° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

$ Certified Bowpex tubing is natural (PEX 5106), red, white, and blue (PEX 5306).
& Tubing Certified against ASTM F876 and CSA B137.5 shall include the standard
  designation(s) of the fitting
  system(s) for which the tubing is recommended by the manufacturer, and shall be marked
  with the
  following fitting system designations: ASTM F1807, ASTM F2159.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
   temperatures up to and including Domestic Hot (140° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

! Product may or may not bear the NSF U.P. code marking.
& Tubing Certified against ASTM F876 and CSA B137.5 shall include the standard
  designation(s) of the fitting
  system(s) for which the tubing is recommended by the manufacturer, and shall be marked
  with the
  following fitting system designations: ASTM F1807, ASTM F2159.
* Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
@ Certified Bow Superpex tubing has a blue, red, or white outer layer.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
   temperatures up to and including Domestic Hot (140° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

! Product may or may not bear the NSF U.P. code marking.
* Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
@ Certified Bow Superpex tubing has a blue, red, or white outer layer.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
   temperatures up to and including Domestic Hot (140° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

& Tubing Certified against ASTM F876 and CSA B137.5 shall include the standard
  designation(s) of the fitting
  system(s) for which the tubing is recommended by the manufacturer, and shall be marked
  with the
  following fitting system designations: ASTM F1807, ASTM F2159.
@ Certified Bow Superpex tubing has a blue, red, or white outer layer.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
   temperatures up to and including Domestic Hot (140° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

! Product may or may not bear the NSF U.P. code marking.
$ Certified Bowpex tubing is natural (PEX 5106), red, white, and blue (PEX 5306).
% Certified Oxypex tubing has a red outer layer.
& Tubing Certified against ASTM F876 and CSA B137.5 shall include the standard
  designation(s) of the fitting
  system(s) for which the tubing is recommended by the manufacturer, and shall be marked
  with the
  following fitting system designations: ASTM F1807, ASTM F2159.
* Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
   temperatures up to and including Domestic Hot (140° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

% Certified Oxypex tubing has a red outer layer.
& Tubing Certified against ASTM F876 and CSA B137.5 shall include the standard
  designation(s) of the fitting
  system(s) for which the tubing is recommended by the manufacturer, and shall be marked
  with the
  following fitting system designations: ASTM F1807, ASTM F2159.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
   temperatures up to and including Domestic Hot (140° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

! Product may or may not bear the NSF U.P. code marking.
% Certified Oxypex tubing has a red outer layer.
& Tubing Certified against ASTM F876 and CSA B137.5 shall include the standard
  designation(s) of the fitting system(s) for which the tubing is recommended by the
  manufacturer, and shall be marked, as applicable, with the following fitting system
  designation(s): ASTM F1807, ASTM F2159.
* Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.

% Certified Oxypex tubing has a red outer layer.
& Tubing Certified against ASTM F876 and CSA B137.5 shall include the standard
  designation(s) of the fitting system(s) for which the tubing is recommended by the
  manufacturer, and shall be marked, as applicable, with the following fitting system
  designation(s): ASTM F1807, ASTM F2159.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.

* Natural (Solid Wall) PEX Pipe Certified 3/8" - 2"sizes. Red, blue, white or orange PEX
  pipe (2 layer pipe - natural with colored adhesive pipe) certified for 3/8" - 1" sizes.
  Tubing certified against CSA B137.5 shall include the standard designation(s) of the
  fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
  marked, as applicable, with the following
  fitting system designation(s): ASTM F1960, ASTM F1807, ASTM F2159, and ASTM F2098.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

* Natural (Solid Wall) PEX Pipe Certified 3/8" - 2"sizes. Red, blue, white or orange PEX
  pipe (2 layer pipe - natural with colored adhesive pipe) certified for 3/8" - 1" sizes.
  Tubing certified against CSA B137.5 shall include the standard designation(s) of the
  fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
  marked, as applicable, with the following
  fitting system designation(s): ASTM F1960, ASTM F1807, ASTM F2159, and ASTM F2098.
@ PEX 5106 : Meets the chlorine resistance requirements of ASTM F876 when tested in
  accordance with ASTM F2023.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

* Monowall pipe (natural); Skinned pipe (red, blue, white and orange); and Barrier pipe
  (red, blue,white and orange) are certified for the following sizes: 3/8", 1/2", 5/8",
  3/4", 1", 1-1/2" & 2".
  Tubing certified against CSA B137.5 shall include the standard designation(s) of the
  fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
  marked, as applicable with the following fitting system designation(s): ASTM F1960, ASTM
  F1807, ASTM F2159, and
  ASTM F2098.
@ This tubing product has been evaluated against the performance requirements of ASTM
  F876/877 and CSA B137.5.  This product is not NSF Certified for use in a potable water
  distribution system.  This product has been evaluated for use in radiant floor heating,
  (NSF-rfh), applications only.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.

* Monowall pipe (natural); Skinned pipe (red, blue, white and orange); and Barrier pipe
  (red, blue,white and orange) are certified for the following sizes: 3/8", 1/2", 5/8",
  3/4", 1", 1-1/2" & 2".
  Tubing certified against CSA B137.5 shall include the standard designation(s) of the
  fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
  marked, as applicable with the following fitting system designation(s): ASTM F1960, ASTM
  F1807, ASTM F2159, and
  ASTM F2098.
@ This tubing product has been evaluated against the performance requirements of ASTM
  F876/877 and CSA B137.5.  This product is not NSF Certified for use in a potable water
  distribution system.  This product has been evaluated for use in radiant floor heating,
  (NSF-rfh), applications only.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.

# Authorized for gray and white.
@ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

# Authorized for gray and white.
& Tubing Certified against CSA B137.5 shall include the standard designation(s) of the
  fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
  marked, if applicable, with the following fitting system designations: ASTM F1807, ASTM
  F2159, ASTM F2098, ASTM F2080, ASSE 1061, and ASTM F1960.
@ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

# Authorized for orange color.
* Product is barrier tubing.
@ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.

# Authorized for orange color.
& Tubing Certified against CSA B137.5 shall include the standard designation(s) of the
  fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
  marked, if applicable, with the following fitting system designations: ASTM F1807, ASTM
  F2159, ASTM F2098, ASTM F2080, ASSE 1061, and ASTM F1960.
* Product is barrier tubing.
@ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.

# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. 
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
  radiant heating system made in accordance with the current version of the ASTM F877
  standard intended for a maximum 100 psi water service and a maximum working temperature
  of 180°F.  System components consist of tubing and/or fittings.  To be installed in
  accordance with manufacturer’s instructions and the latest edition of the Uniform
  Plumbing Code™.
? The UV material type 5306 is only applicable to the red, white, light blue and blue pipe.
@ Certified for red, blue, white and natural colors.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

? The UV material type 5306 is only applicable to the red, white, light blue and blue pipe.
@ Certified for red, blue, white and natural colors.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. 
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
  radiant heating system made in accordance with the current version of the ASTM F877
  standard intended for a maximum 100 psi water service and a maximum working temperature
  of 180°F.  System components consist of tubing and/or fittings.  To be installed in
  accordance with manufacturer’s instructions and the latest edition of the Uniform
  Plumbing Code™.
@ Certified for red, blue, white and natural colors.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[3] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the
    fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
    marked, as applicable, with the following fitting system designation(s):  ASTM F1807,
    ASTM F2159, ASSE 1061.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. 
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
  radiant heating system made in accordance with the current version of the ASTM F877
  standard intended for a maximum 100 psi water service and a maximum working temperature
  of 180°F.  System components consist of tubing and/or fittings.  To be installed in
  accordance with manufacturer’s instructions and the latest edition of the Uniform
  Plumbing Code™.
? The UV material type 5306 is only applicable to the red, white, light blue and blue pipe.
@ Certified for red, blue, white and natural colors.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

? The UV material type 5306 is only applicable to the red, white, light blue and blue pipe.
@ Certified for red, blue, white and natural colors.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. 
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
  radiant heating system made in accordance with the current version of the ASTM F877
  standard intended for a maximum 100 psi water service and a maximum working temperature
  of 180°F.  System components consist of tubing and/or fittings.  To be installed in
  accordance with manufacturer’s instructions and the latest edition of the Uniform
  Plumbing Code™.
@ Certified for red, blue, white and natural colors.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[3] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the
    fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
    marked, as applicable, with the following fitting system designation(s):  ASTM F1807,
    ASTM F2159, ASSE 1061.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

! Orange, natural, red, and teal green.
# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. 
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
  radiant heating system made in accordance with the current version of the ASTM F877
  standard intended for a maximum 100 psi water service and a maximum working temperature
  of 180°F.  System components consist of tubing and/or fittings.  To be installed in
  accordance with manufacturer’s instructions and the latest edition of the Uniform
  Plumbing Code™.
% This product is barrier tubing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

! Orange, natural, red, and teal green.
# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. 
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
  radiant heating system made in accordance with the current version of the ASTM F877
  standard intended for a maximum 100 psi water service and a maximum working temperature
  of 180°F.  System components consist of tubing and/or fittings.  To be installed in
  accordance with manufacturer’s instructions and the latest edition of the Uniform
  Plumbing Code™.
% This product is barrier tubing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[3] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the
    fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
    marked, as applicable, with the following fitting system designation(s):  ASTM F1807,
    ASTM F2159, ASSE 1061.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

! Orange, natural, red, and teal green.
# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. 
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
  radiant heating system made in accordance with the current version of the ASTM F877
  standard intended for a maximum 100 psi water service and a maximum working temperature
  of 180°F.  System components consist of tubing and/or fittings.  To be installed in
  accordance with manufacturer’s instructions and the latest edition of the Uniform
  Plumbing Code™.
% This product is barrier tubing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

! Orange, natural, red, and teal green.
# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. 
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
  radiant heating system made in accordance with the current version of the ASTM F877
  standard intended for a maximum 100 psi water service and a maximum working temperature
  of 180°F.  System components consist of tubing and/or fittings.  To be installed in
  accordance with manufacturer’s instructions and the latest edition of the Uniform
  Plumbing Code™.
% This product is barrier tubing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[3] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the
    fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
    marked, as applicable, with the following fitting system designation(s):  ASTM F1807,
    ASTM F2159, ASSE 1061.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. 
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
  radiant heating system made in accordance with the current version of the ASTM F877
  standard intended for a maximum 100 psi water service and a maximum working temperature
  of 180°F.  System components consist of tubing and/or fittings.  To be installed in
  accordance with manufacturer’s instructions and the latest edition of the Uniform
  Plumbing Code™.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
µ Certified pipe has a black inner layer with a red, white, or blue outer layer.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. 
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
  radiant heating system made in accordance with the current version of the ASTM F877
  standard intended for a maximum 100 psi water service and a maximum working temperature
  of 180°F.  System components consist of tubing and/or fittings.  To be installed in
  accordance with manufacturer’s instructions and the latest edition of the Uniform
  Plumbing Code™.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
µ Certified pipe has a black inner layer with a red, white, or blue outer layer.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[3] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the
    fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
    marked, as applicable, with the following fitting system designation(s):  ASTM F1807,
    ASTM F2159, ASSE 1061.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. 
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
  radiant heating system made in accordance with the current version of the ASTM F877
  standard intended for a maximum 100 psi water service and a maximum working temperature
  of 180°F.  System components consist of tubing and/or fittings.  To be installed in
  accordance with manufacturer’s instructions and the latest edition of the Uniform
  Plumbing Code™.
? The UV material type 5306 is only applicable to the red, white, light blue and blue pipe.
@ Certified for red, blue, white and natural colors.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

? The UV material type 5306 is only applicable to the red, white, light blue and blue pipe.
@ Certified for red, blue, white and natural colors.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. 
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
  radiant heating system made in accordance with the current version of the ASTM F877
  standard intended for a maximum 100 psi water service and a maximum working temperature
  of 180°F.  System components consist of tubing and/or fittings.  To be installed in
  accordance with manufacturer’s instructions and the latest edition of the Uniform
  Plumbing Code™.
? The UV material type 5306 is only applicable to the red, white, light blue and blue pipe.
@ Certified for red, blue, white and natural colors.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[3] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the
    fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
    marked, as applicable, with the following fitting system designation(s):  ASTM F1807,
    ASTM F2159, ASSE 1061.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. 
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
  radiant heating system made in accordance with the current version of the ASTM F877
  standard intended for a maximum 100 psi water service and a maximum working temperature
  of 180°F.  System components consist of tubing and/or fittings.  To be installed in
  accordance with manufacturer’s instructions and the latest edition of the Uniform
  Plumbing Code™.
? The UV material type 5306 is only applicable to the red, white, light blue and blue pipe.
@ Certified for red, blue, white and natural colors.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

? The UV material type 5306 is only applicable to the red, white, light blue and blue pipe.
@ Certified for red, blue, white and natural colors.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. 
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
  radiant heating system made in accordance with the current version of the ASTM F877
  standard intended for a maximum 100 psi water service and a maximum working temperature
  of 180°F.  System components consist of tubing and/or fittings.  To be installed in
  accordance with manufacturer’s instructions and the latest edition of the Uniform
  Plumbing Code™.
? The UV material type 5306 is only applicable to the red, white, light blue and blue pipe.
@ Certified for red, blue, white and natural colors.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[3] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the
    fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
    marked, as applicable, with the following fitting system designation(s):  ASTM F1807,
    ASTM F2159, ASSE 1061.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. 
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
  radiant heating system made in accordance with the current version of the ASTM F877
  standard intended for a maximum 100 psi water service and a maximum working temperature
  of 180°F.  System components consist of tubing and/or fittings.  To be installed in
  accordance with manufacturer’s instructions and the latest edition of the Uniform
  Plumbing Code™.
? The UV material type 5306 is only applicable to the red, white, light blue and blue pipe.
@ Certified for red, blue, white and natural colors.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

? The UV material type 5306 is only applicable to the red, white, light blue and blue pipe.
@ Certified for red, blue, white and natural colors.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. 
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
  radiant heating system made in accordance with the current version of the ASTM F877
  standard intended for a maximum 100 psi water service and a maximum working temperature
  of 180°F.  System components consist of tubing and/or fittings.  To be installed in
  accordance with manufacturer’s instructions and the latest edition of the Uniform
  Plumbing Code™.
? The UV material type 5306 is only applicable to the red, white, light blue and blue pipe.
@ Certified for red, blue, white and natural colors.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[3] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the
    fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
    marked, as applicable, with the following fitting system designation(s):  ASTM F1807,
    ASTM F2159, ASSE 1061.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. 
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
  radiant heating system made in accordance with the current version of the ASTM F877
  standard intended for a maximum 100 psi water service and a maximum working temperature
  of 180°F.  System components consist of tubing and/or fittings.  To be installed in
  accordance with manufacturer’s instructions and the latest edition of the Uniform
  Plumbing Code™.
? The UV material type 5306 is only applicable to the red, white, light blue and blue pipe.
@ Certified for red, blue, white and natural colors.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

? The UV material type 5306 is only applicable to the red, white, light blue and blue pipe.
@ Certified for red, blue, white and natural colors.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. 
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
  radiant heating system made in accordance with the current version of the ASTM F877
  standard intended for a maximum 100 psi water service and a maximum working temperature
  of 180°F.  System components consist of tubing and/or fittings.  To be installed in
  accordance with manufacturer’s instructions and the latest edition of the Uniform
  Plumbing Code™.
? The UV material type 5306 is only applicable to the red, white, light blue and blue pipe.
@ Certified for red, blue, white and natural colors.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[3] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the
    fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
    marked, as applicable, with the following fitting system designation(s):  ASTM F1807,
    ASTM F2159, ASSE 1061.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. 
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
  radiant heating system made in accordance with the current version of the ASTM F877
  standard intended for a maximum 100 psi water service and a maximum working temperature
  of 180°F.  System components consist of tubing and/or fittings.  To be installed in
  accordance with manufacturer’s instructions and the latest edition of the Uniform
  Plumbing Code™.
? The UV material type 5306 is only applicable to the red, white, light blue and blue pipe.
@ Certified for red, blue, white and natural colors.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

? The UV material type 5306 is only applicable to the red, white, light blue and blue pipe.
@ Certified for red, blue, white and natural colors.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. 
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
  radiant heating system made in accordance with the current version of the ASTM F877
  standard intended for a maximum 100 psi water service and a maximum working temperature
  of 180°F.  System components consist of tubing and/or fittings.  To be installed in
  accordance with manufacturer’s instructions and the latest edition of the Uniform
  Plumbing Code™.
? The UV material type 5306 is only applicable to the red, white, light blue and blue pipe.
@ Certified for red, blue, white and natural colors.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[3] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the
    fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
    marked, as applicable, with the following fitting system designation(s):  ASTM F1807,
    ASTM F2159, ASSE 1061.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. 
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
  radiant heating system made in accordance with the current version of the ASTM F877
  standard intended for a maximum 100 psi water service and a maximum working temperature
  of 180°F.  System components consist of tubing and/or fittings.  To be installed in
  accordance with manufacturer’s instructions and the latest edition of the Uniform
  Plumbing Code™.
? The UV material type 5306 is only applicable to the red, white, light blue and blue pipe.
@ Certified for red, blue, white and natural colors.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

? The UV material type 5306 is only applicable to the red, white, light blue and blue pipe.
@ Certified for red, blue, white and natural colors.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. 
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
  radiant heating system made in accordance with the current version of the ASTM F877
  standard intended for a maximum 100 psi water service and a maximum working temperature
  of 180°F.  System components consist of tubing and/or fittings.  To be installed in
  accordance with manufacturer’s instructions and the latest edition of the Uniform
  Plumbing Code™.
@ Certified for red, blue, white and natural colors.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[3] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the
    fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
    marked, as applicable, with the following fitting system designation(s):  ASTM F1807,
    ASTM F2159, ASSE 1061.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

! Orange, natural, red, and teal green.
# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. 
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
  radiant heating system made in accordance with the current version of the ASTM F877
  standard intended for a maximum 100 psi water service and a maximum working temperature
  of 180°F.  System components consist of tubing and/or fittings.  To be installed in
  accordance with manufacturer’s instructions and the latest edition of the Uniform
  Plumbing Code™.
% This product is barrier tubing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

! Orange, natural, red, and teal green.
# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. 
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
  radiant heating system made in accordance with the current version of the ASTM F877
  standard intended for a maximum 100 psi water service and a maximum working temperature
  of 180°F.  System components consist of tubing and/or fittings.  To be installed in
  accordance with manufacturer’s instructions and the latest edition of the Uniform
  Plumbing Code™.
% This product is barrier tubing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[3] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the
    fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
    marked, as applicable, with the following fitting system designation(s):  ASTM F1807,
    ASTM F2159, ASSE 1061.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

! Orange, natural, red, and teal green.
# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. 
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
  radiant heating system made in accordance with the current version of the ASTM F877
  standard intended for a maximum 100 psi water service and a maximum working temperature
  of 180°F.  System components consist of tubing and/or fittings.  To be installed in
  accordance with manufacturer’s instructions and the latest edition of the Uniform
  Plumbing Code™.
% This product is barrier tubing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
Þ Product is Certified to the International Plumbing Code. Installation in accordance with
  the manufacturer's instructions and the requirements of the latest edition of the
  International Plumbing Code.

! Orange, natural, red, and teal green.
# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. 
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
  radiant heating system made in accordance with the current version of the ASTM F877
  standard intended for a maximum 100 psi water service and a maximum working temperature
  of 180°F.  System components consist of tubing and/or fittings.  To be installed in
  accordance with manufacturer’s instructions and the latest edition of the Uniform
  Plumbing Code™.
% This product is barrier tubing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
Þ Product is Certified to the International Plumbing Code. Installation in accordance with
  the manufacturer's instructions and the requirements of the latest edition of the
  International Plumbing Code.
[3] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the
    fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
    marked, as applicable, with the following fitting system designation(s):  ASTM F1807,
    ASTM F2159, ASSE 1061.

# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. 
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
  radiant heating system made in accordance with the current version of the ASTM F877
  standard intended for a maximum 100 psi water service and a maximum working temperature
  of 180°F.  System components consist of tubing and/or fittings.  To be installed in
  accordance with manufacturer’s instructions and the latest edition of the Uniform
  Plumbing Code™.
? The UV material type 5306 is only applicable to the red, white, light blue and blue pipe.
@ Certified for red, blue, white and natural colors.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

? The UV material type 5306 is only applicable to the red, white, light blue and blue pipe.
@ Certified for red, blue, white and natural colors.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. 
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
  radiant heating system made in accordance with the current version of the ASTM F877
  standard intended for a maximum 100 psi water service and a maximum working temperature
  of 180°F.  System components consist of tubing and/or fittings.  To be installed in
  accordance with manufacturer’s instructions and the latest edition of the Uniform
  Plumbing Code™.
? The UV material type 5306 is only applicable to the red, white, light blue and blue pipe.
@ Certified for red, blue, white and natural colors.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[3] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the
    fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
    marked, as applicable, with the following fitting system designation(s):  ASTM F1807,
    ASTM F2159, ASSE 1061.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. 
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
  radiant heating system made in accordance with the current version of the ASTM F877
  standard intended for a maximum 100 psi water service and a maximum working temperature
  of 180°F.  System components consist of tubing and/or fittings.  To be installed in
  accordance with manufacturer’s instructions and the latest edition of the Uniform
  Plumbing Code™.
? The UV material type 5306 is only applicable to the red, white, light blue and blue pipe.
@ Certified for red, blue, white and natural colors.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. 
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
  radiant heating system made in accordance with the current version of the ASTM F877
  standard intended for a maximum 100 psi water service and a maximum working temperature
  of 180°F.  System components consist of tubing and/or fittings.  To be installed in
  accordance with manufacturer’s instructions and the latest edition of the Uniform
  Plumbing Code™.
? The UV material type 5306 is only applicable to the red, white, light blue and blue pipe.
@ Certified for red, blue, white and natural colors.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[3] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the
    fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
    marked, as applicable, with the following fitting system designation(s):  ASTM F1807,
    ASTM F2159, ASSE 1061.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

! Orange, natural, red, and teal green.
# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. 
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
  radiant heating system made in accordance with the current version of the ASTM F877
  standard intended for a maximum 100 psi water service and a maximum working temperature
  of 180°F.  System components consist of tubing and/or fittings.  To be installed in
  accordance with manufacturer’s instructions and the latest edition of the Uniform
  Plumbing Code™.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

! Orange, natural, red, and teal green.
# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. 
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
  radiant heating system made in accordance with the current version of the ASTM F877
  standard intended for a maximum 100 psi water service and a maximum working temperature
  of 180°F.  System components consist of tubing and/or fittings.  To be installed in
  accordance with manufacturer’s instructions and the latest edition of the Uniform
  Plumbing Code™.
% This product is barrier tubing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[3] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the
    fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
    marked, as applicable, with the following fitting system designation(s):  ASTM F1807,
    ASTM F2159, ASSE 1061.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

! Orange, natural, red, and teal green.
# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. 
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
  radiant heating system made in accordance with the current version of the ASTM F877
  standard intended for a maximum 100 psi water service and a maximum working temperature
  of 180°F.  System components consist of tubing and/or fittings.  To be installed in
  accordance with manufacturer’s instructions and the latest edition of the Uniform
  Plumbing Code™.
@ Certified for red, blue, white and natural colors.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

! Orange, natural, red, and teal green.
# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. 
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
  radiant heating system made in accordance with the current version of the ASTM F877
  standard intended for a maximum 100 psi water service and a maximum working temperature
  of 180°F.  System components consist of tubing and/or fittings.  To be installed in
  accordance with manufacturer’s instructions and the latest edition of the Uniform
  Plumbing Code™.
% This product is barrier tubing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[3] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the
    fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
    marked, as applicable, with the following fitting system designation(s):  ASTM F1807,
    ASTM F2159, ASSE 1061.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

! Orange, natural, red, and teal green.
# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. 
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
  radiant heating system made in accordance with the current version of the ASTM F877
  standard intended for a maximum 100 psi water service and a maximum working temperature
  of 180°F.  System components consist of tubing and/or fittings.  To be installed in
  accordance with manufacturer’s instructions and the latest edition of the Uniform
  Plumbing Code™.
% This product is barrier tubing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

! Orange, natural, red, and teal green.
# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. 
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
  radiant heating system made in accordance with the current version of the ASTM F877
  standard intended for a maximum 100 psi water service and a maximum working temperature
  of 180°F.  System components consist of tubing and/or fittings.  To be installed in
  accordance with manufacturer’s instructions and the latest edition of the Uniform
  Plumbing Code™.
% This product is barrier tubing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[3] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the
    fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
    marked, as applicable, with the following fitting system designation(s):  ASTM F1807,
    ASTM F2159, ASSE 1061.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. 
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
  radiant heating system made in accordance with the current version of the ASTM F877
  standard intended for a maximum 100 psi water service and a maximum working temperature
  of 180°F.  System components consist of tubing and/or fittings.  To be installed in
  accordance with manufacturer’s instructions and the latest edition of the Uniform
  Plumbing Code™.
? The UV material type 5306 is only applicable to the red, white, light blue and blue pipe.
@ Certified for red, blue, white and natural colors.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

? The UV material type 5306 is only applicable to the red, white, light blue and blue pipe.
@ Certified for red, blue, white and natural colors.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. 
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
  radiant heating system made in accordance with the current version of the ASTM F877
  standard intended for a maximum 100 psi water service and a maximum working temperature
  of 180°F.  System components consist of tubing and/or fittings.  To be installed in
  accordance with manufacturer’s instructions and the latest edition of the Uniform
  Plumbing Code™.
@ Certified for red, blue, white and natural colors.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[3] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the
    fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
    marked, as applicable, with the following fitting system designation(s):  ASTM F1807,
    ASTM F2159, ASSE 1061.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

! Orange, natural, red, and teal green.
# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. 
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
  radiant heating system made in accordance with the current version of the ASTM F877
  standard intended for a maximum 100 psi water service and a maximum working temperature
  of 180°F.  System components consist of tubing and/or fittings.  To be installed in
  accordance with manufacturer’s instructions and the latest edition of the Uniform
  Plumbing Code™.
% This product is barrier tubing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[3] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the
    fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
    marked, as applicable, with the following fitting system designation(s):  ASTM F1807,
    ASTM F2159, ASSE 1061.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

! Orange, natural, red, and teal green.
# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. 
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
  radiant heating system made in accordance with the current version of the ASTM F877
  standard intended for a maximum 100 psi water service and a maximum working temperature
  of 180°F.  System components consist of tubing and/or fittings.  To be installed in
  accordance with manufacturer’s instructions and the latest edition of the Uniform
  Plumbing Code™.
% This product is barrier tubing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. 
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
  radiant heating system made in accordance with the current version of the ASTM F877
  standard intended for a maximum 100 psi water service and a maximum working temperature
  of 180°F.  System components consist of tubing and/or fittings.  To be installed in
  accordance with manufacturer’s instructions and the latest edition of the Uniform
  Plumbing Code™.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
µ Certified pipe has a black inner layer with a red, white, or blue outer layer.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. 
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
  radiant heating system made in accordance with the current version of the ASTM F877
  standard intended for a maximum 100 psi water service and a maximum working temperature
  of 180°F.  System components consist of tubing and/or fittings.  To be installed in
  accordance with manufacturer’s instructions and the latest edition of the Uniform
  Plumbing Code™.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
µ Certified pipe has a black inner layer with a red, white, or blue outer layer.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[3] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the
    fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
    marked, as applicable, with the following fitting system designation(s):  ASTM F1807,
    ASTM F2159, ASSE 1061.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd.
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
@ Certified for purple color.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.

@ Certified for purple color.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.

# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd.
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
@ Certified for purple color.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
[1] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the
    fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
    marked, as applicable, with the following fitting system designation(s): ASTM F1807,
    ASTM F2159, ASSE 1061.

# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd.
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
@ Certified for purple color.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.

@ Certified for purple color.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.

# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd.
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
@ Certified for purple color.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
[1] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the
    fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
    marked, as applicable, with the following fitting system designation(s): ASTM F1807,
    ASTM F2159, ASSE 1061.

# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd.
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
@ Certified for purple color.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.

@ Certified for purple color.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.

# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd.
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
@ Certified for purple color.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
[1] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the
    fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
    marked, as applicable, with the following fitting system designation(s): ASTM F1807,
    ASTM F2159, ASSE 1061.

# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd.
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
@ Certified for purple color.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.

@ Certified for purple color.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.

# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd.
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
@ Certified for purple color.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
[1] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the
    fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
    marked, as applicable, with the following fitting system designation(s): ASTM F1807,
    ASTM F2159, ASSE 1061.

# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd.
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
@ Certified for purple color.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.

@ Certified for purple color.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.

# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd.
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
@ Certified for purple color.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
[1] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the
    fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
    marked, as applicable, with the following fitting system designation(s): ASTM F1807,
    ASTM F2159, ASSE 1061.

# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd.
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
@ Certified for purple color.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.

@ Certified for purple color.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.

# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd.
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
@ Certified for purple color.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
[1] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the
    fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
    marked, as applicable, with the following fitting system designation(s): ASTM F1807,
    ASTM F2159, ASSE 1061.

# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd.
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
@ Certified for purple color.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.

@ Certified for purple color.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.

# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd.
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
@ Certified for purple color.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
[1] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the
    fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
    marked, as applicable, with the following fitting system designation(s): ASTM F1807,
    ASTM F2159, ASSE 1061.

# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd.
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
@ Certified for purple color.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.

@ Certified for purple color.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.

# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd.
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
@ Certified for purple color.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
[1] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the
    fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
    marked, as applicable, with the following fitting system designation(s): ASTM F1807,
    ASTM F2159, ASSE 1061.

# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd.
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
@ Certified for purple color.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.

@ Certified for purple color.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.

# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd.
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
@ Certified for purple color.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
[1] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the
    fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
    marked, as applicable, with the following fitting system designation(s): ASTM F1807,
    ASTM F2159, ASSE 1061.

# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd.
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
@ Certified for purple color.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.

@ Certified for purple color.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.

# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd.
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
@ Certified for purple color.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
[1] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the
    fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
    marked, as applicable, with the following fitting system designation(s): ASTM F1807,
    ASTM F2159, ASSE 1061.

# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd.
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
@ Certified for purple color.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.

@ Certified for purple color.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.

# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd.
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
@ Certified for purple color.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
[1] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the
    fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
    marked, as applicable, with the following fitting system designation(s): ASTM F1807,
    ASTM F2159, ASSE 1061.

# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. 
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
  radiant heating system made in accordance with the current version of the ASTM F877
  standard intended for a maximum 100 psi water service and a maximum working temperature
  of 180°F.  System components consist of tubing and/or fittings.  To be installed in
  accordance with manufacturer’s instructions and the latest edition of the Uniform
  Plumbing Code™.
? The UV material type 5306 is only applicable to the red, white, light blue and blue pipe.
@ Certified for red, blue, white and natural colors.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.

# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. 
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
  radiant heating system made in accordance with the current version of the ASTM F877
  standard intended for a maximum 100 psi water service and a maximum working temperature
  of 180°F.  System components consist of tubing and/or fittings.  To be installed in
  accordance with manufacturer’s instructions and the latest edition of the Uniform
  Plumbing Code™.
@ Certified for red, blue, white and natural colors.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
[1] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the
    fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
    marked, as applicable, with the following fitting system designation(s):  ASTM F1807,
    ASTM F2159, ASSE 1061.

# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. 
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
  radiant heating system made in accordance with the current version of the ASTM F877
  standard intended for a maximum 100 psi water service and a maximum working temperature
  of 180°F.  System components consist of tubing and/or fittings.  To be installed in
  accordance with manufacturer’s instructions and the latest edition of the Uniform
  Plumbing Code™.
? The UV material type 5306 is only applicable to the red, white, light blue and blue pipe.
@ Certified for red, blue, white and natural colors.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.

# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. 
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
  radiant heating system made in accordance with the current version of the ASTM F877
  standard intended for a maximum 100 psi water service and a maximum working temperature
  of 180°F.  System components consist of tubing and/or fittings.  To be installed in
  accordance with manufacturer’s instructions and the latest edition of the Uniform
  Plumbing Code™.
@ Certified for red, blue, white and natural colors.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
[1] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the
    fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
    marked, as applicable, with the following fitting system designation(s):  ASTM F1807,
    ASTM F2159, ASSE 1061.

! Orange, natural, red, and teal green.
# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. 
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
  radiant heating system made in accordance with the current version of the ASTM F877
  standard intended for a maximum 100 psi water service and a maximum working temperature
  of 180°F.  System components consist of tubing and/or fittings.  To be installed in
  accordance with manufacturer’s instructions and the latest edition of the Uniform
  Plumbing Code™.
% This product is barrier tubing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.

! Orange, natural, red, and teal green.
# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. 
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
  radiant heating system made in accordance with the current version of the ASTM F877
  standard intended for a maximum 100 psi water service and a maximum working temperature
  of 180°F.  System components consist of tubing and/or fittings.  To be installed in
  accordance with manufacturer’s instructions and the latest edition of the Uniform
  Plumbing Code™.
% This product is barrier tubing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
[1] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the
    fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
    marked, as applicable, with the following fitting system designation(s):  ASTM F1807,
    ASTM F2159, ASSE 1061.

! Orange, natural, red, and teal green.
# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. 
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
  radiant heating system made in accordance with the current version of the ASTM F877
  standard intended for a maximum 100 psi water service and a maximum working temperature
  of 180°F.  System components consist of tubing and/or fittings.  To be installed in
  accordance with manufacturer’s instructions and the latest edition of the Uniform
  Plumbing Code™.
% This product is barrier tubing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.

! Orange, natural, red, and teal green.
# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. 
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
  radiant heating system made in accordance with the current version of the ASTM F877
  standard intended for a maximum 100 psi water service and a maximum working temperature
  of 180°F.  System components consist of tubing and/or fittings.  To be installed in
  accordance with manufacturer’s instructions and the latest edition of the Uniform
  Plumbing Code™.
% This product is barrier tubing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
[1] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the
    fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
    marked, as applicable, with the following fitting system designation(s):  ASTM F1807,
    ASTM F2159, ASSE 1061.

# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. 
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
  radiant heating system made in accordance with the current version of the ASTM F877
  standard intended for a maximum 100 psi water service and a maximum working temperature
  of 180°F.  System components consist of tubing and/or fittings.  To be installed in
  accordance with manufacturer’s instructions and the latest edition of the Uniform
  Plumbing Code™.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
µ Certified pipe has a black inner layer with a red, white, or blue outer layer.

# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. 
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
  radiant heating system made in accordance with the current version of the ASTM F877
  standard intended for a maximum 100 psi water service and a maximum working temperature
  of 180°F.  System components consist of tubing and/or fittings.  To be installed in
  accordance with manufacturer’s instructions and the latest edition of the Uniform
  Plumbing Code™.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
µ Certified pipe has a black inner layer with a red, white, or blue outer layer.
[1] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the
    fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
    marked, as applicable, with the following fitting system designation(s):  ASTM F1807,
    ASTM F2159, ASSE 1061.

# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. 
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
  radiant heating system made in accordance with the current version of the ASTM F877
  standard intended for a maximum 100 psi water service and a maximum working temperature
  of 180°F.  System components consist of tubing and/or fittings.  To be installed in
  accordance with manufacturer’s instructions and the latest edition of the Uniform
  Plumbing Code™.
? The UV material type 5306 is only applicable to the red, white, light blue and blue pipe.
@ Certified for red, blue, white and natural colors.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.

# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. 
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
  radiant heating system made in accordance with the current version of the ASTM F877
  standard intended for a maximum 100 psi water service and a maximum working temperature
  of 180°F.  System components consist of tubing and/or fittings.  To be installed in
  accordance with manufacturer’s instructions and the latest edition of the Uniform
  Plumbing Code™.
? The UV material type 5306 is only applicable to the red, white, light blue and blue pipe.
@ Certified for red, blue, white and natural colors.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
[1] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the
    fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
    marked, as applicable, with the following fitting system designation(s):  ASTM F1807,
    ASTM F2159, ASSE 1061.

# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. 
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
  radiant heating system made in accordance with the current version of the ASTM F877
  standard intended for a maximum 100 psi water service and a maximum working temperature
  of 180°F.  System components consist of tubing and/or fittings.  To be installed in
  accordance with manufacturer’s instructions and the latest edition of the Uniform
  Plumbing Code™.
? The UV material type 5306 is only applicable to the red, white, light blue and blue pipe.
@ Certified for red, blue, white and natural colors.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.

# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. 
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
  radiant heating system made in accordance with the current version of the ASTM F877
  standard intended for a maximum 100 psi water service and a maximum working temperature
  of 180°F.  System components consist of tubing and/or fittings.  To be installed in
  accordance with manufacturer’s instructions and the latest edition of the Uniform
  Plumbing Code™.
? The UV material type 5306 is only applicable to the red, white, light blue and blue pipe.
@ Certified for red, blue, white and natural colors.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
[1] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the
    fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
    marked, as applicable, with the following fitting system designation(s):  ASTM F1807,
    ASTM F2159, ASSE 1061.

# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. 
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
  radiant heating system made in accordance with the current version of the ASTM F877
  standard intended for a maximum 100 psi water service and a maximum working temperature
  of 180°F.  System components consist of tubing and/or fittings.  To be installed in
  accordance with manufacturer’s instructions and the latest edition of the Uniform
  Plumbing Code™.
? The UV material type 5306 is only applicable to the red, white, light blue and blue pipe.
@ Certified for red, blue, white and natural colors.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.

# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. 
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
  radiant heating system made in accordance with the current version of the ASTM F877
  standard intended for a maximum 100 psi water service and a maximum working temperature
  of 180°F.  System components consist of tubing and/or fittings.  To be installed in
  accordance with manufacturer’s instructions and the latest edition of the Uniform
  Plumbing Code™.
? The UV material type 5306 is only applicable to the red, white, light blue and blue pipe.
@ Certified for red, blue, white and natural colors.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
[1] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the
    fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
    marked, as applicable, with the following fitting system designation(s):  ASTM F1807,
    ASTM F2159, ASSE 1061.

# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. 
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
  radiant heating system made in accordance with the current version of the ASTM F877
  standard intended for a maximum 100 psi water service and a maximum working temperature
  of 180°F.  System components consist of tubing and/or fittings.  To be installed in
  accordance with manufacturer’s instructions and the latest edition of the Uniform
  Plumbing Code™.
? The UV material type 5306 is only applicable to the red, white, light blue and blue pipe.
@ Certified for red, blue, white and natural colors.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.

# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. 
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
  radiant heating system made in accordance with the current version of the ASTM F877
  standard intended for a maximum 100 psi water service and a maximum working temperature
  of 180°F.  System components consist of tubing and/or fittings.  To be installed in
  accordance with manufacturer’s instructions and the latest edition of the Uniform
  Plumbing Code™.
? The UV material type 5306 is only applicable to the red, white, light blue and blue pipe.
@ Certified for red, blue, white and natural colors.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
[1] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the
    fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
    marked, as applicable, with the following fitting system designation(s):  ASTM F1807,
    ASTM F2159, ASSE 1061.

# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. 
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
  radiant heating system made in accordance with the current version of the ASTM F877
  standard intended for a maximum 100 psi water service and a maximum working temperature
  of 180°F.  System components consist of tubing and/or fittings.  To be installed in
  accordance with manufacturer’s instructions and the latest edition of the Uniform
  Plumbing Code™.
? The UV material type 5306 is only applicable to the red, white, light blue and blue pipe.
@ Certified for red, blue, white and natural colors.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.

# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. 
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
  radiant heating system made in accordance with the current version of the ASTM F877
  standard intended for a maximum 100 psi water service and a maximum working temperature
  of 180°F.  System components consist of tubing and/or fittings.  To be installed in
  accordance with manufacturer’s instructions and the latest edition of the Uniform
  Plumbing Code™.
? The UV material type 5306 is only applicable to the red, white, light blue and blue pipe.
@ Certified for red, blue, white and natural colors.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
[1] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the
    fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
    marked, as applicable, with the following fitting system designation(s):  ASTM F1807,
    ASTM F2159, ASSE 1061.

# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. 
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
  radiant heating system made in accordance with the current version of the ASTM F877
  standard intended for a maximum 100 psi water service and a maximum working temperature
  of 180°F.  System components consist of tubing and/or fittings.  To be installed in
  accordance with manufacturer’s instructions and the latest edition of the Uniform
  Plumbing Code™.
? The UV material type 5306 is only applicable to the red, white, light blue and blue pipe.
@ Certified for red, blue, white and natural colors.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.

# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. 
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
  radiant heating system made in accordance with the current version of the ASTM F877
  standard intended for a maximum 100 psi water service and a maximum working temperature
  of 180°F.  System components consist of tubing and/or fittings.  To be installed in
  accordance with manufacturer’s instructions and the latest edition of the Uniform
  Plumbing Code™.
@ Certified for red, blue, white and natural colors.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
[1] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the
    fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
    marked, as applicable, with the following fitting system designation(s):  ASTM F1807,
    ASTM F2159, ASSE 1061.

! Orange, natural, red, and teal green.
# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. 
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
  radiant heating system made in accordance with the current version of the ASTM F877
  standard intended for a maximum 100 psi water service and a maximum working temperature
  of 180°F.  System components consist of tubing and/or fittings.  To be installed in
  accordance with manufacturer’s instructions and the latest edition of the Uniform
  Plumbing Code™.
% This product is barrier tubing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.

! Orange, natural, red, and teal green.
# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. 
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
  radiant heating system made in accordance with the current version of the ASTM F877
  standard intended for a maximum 100 psi water service and a maximum working temperature
  of 180°F.  System components consist of tubing and/or fittings.  To be installed in
  accordance with manufacturer’s instructions and the latest edition of the Uniform
  Plumbing Code™.
% This product is barrier tubing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
[1] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the
    fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
    marked, as applicable, with the following fitting system designation(s):  ASTM F1807,
    ASTM F2159, ASSE 1061.

! Orange, natural, red, and teal green.
# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. 
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
  radiant heating system made in accordance with the current version of the ASTM F877
  standard intended for a maximum 100 psi water service and a maximum working temperature
  of 180°F.  System components consist of tubing and/or fittings.  To be installed in
  accordance with manufacturer’s instructions and the latest edition of the Uniform
  Plumbing Code™.
% This product is barrier tubing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
Þ Product is Certified to the International Plumbing Code. Installation in accordance with
  the manufacturer's instructions and the requirements of the latest edition of the
  International Plumbing Code.

! Orange, natural, red, and teal green.
# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. 
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
  radiant heating system made in accordance with the current version of the ASTM F877
  standard intended for a maximum 100 psi water service and a maximum working temperature
  of 180°F.  System components consist of tubing and/or fittings.  To be installed in
  accordance with manufacturer’s instructions and the latest edition of the Uniform
  Plumbing Code™.
% This product is barrier tubing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
Þ Product is Certified to the International Plumbing Code. Installation in accordance with
  the manufacturer's instructions and the requirements of the latest edition of the
  International Plumbing Code.
[1] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the
    fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
    marked, as applicable, with the following fitting system designation(s):  ASTM F1807,
    ASTM F2159, ASSE 1061.

# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. 
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
  radiant heating system made in accordance with the current version of the ASTM F877
  standard intended for a maximum 100 psi water service and a maximum working temperature
  of 180°F.  System components consist of tubing and/or fittings.  To be installed in
  accordance with manufacturer’s instructions and the latest edition of the Uniform
  Plumbing Code™.
? The UV material type 5306 is only applicable to the red, white, light blue and blue pipe.
@ Certified for red, blue, white and natural colors.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.

? The UV material type 5306 is only applicable to the red, white, light blue and blue pipe.
@ Certified for red, blue, white and natural colors.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.

# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. 
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
  radiant heating system made in accordance with the current version of the ASTM F877
  standard intended for a maximum 100 psi water service and a maximum working temperature
  of 180°F.  System components consist of tubing and/or fittings.  To be installed in
  accordance with manufacturer’s instructions and the latest edition of the Uniform
  Plumbing Code™.
? The UV material type 5306 is only applicable to the red, white, light blue and blue pipe.
@ Certified for red, blue, white and natural colors.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
[1] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the
    fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
    marked, as applicable, with the following fitting system designation(s):  ASTM F1807,
    ASTM F2159, ASSE 1061.

# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. 
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
  radiant heating system made in accordance with the current version of the ASTM F877
  standard intended for a maximum 100 psi water service and a maximum working temperature
  of 180°F.  System components consist of tubing and/or fittings.  To be installed in
  accordance with manufacturer’s instructions and the latest edition of the Uniform
  Plumbing Code™.
? The UV material type 5306 is only applicable to the red, white, light blue and blue pipe.
@ Certified for red, blue, white and natural colors.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.

# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. 
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
  radiant heating system made in accordance with the current version of the ASTM F877
  standard intended for a maximum 100 psi water service and a maximum working temperature
  of 180°F.  System components consist of tubing and/or fittings.  To be installed in
  accordance with manufacturer’s instructions and the latest edition of the Uniform
  Plumbing Code™.
? The UV material type 5306 is only applicable to the red, white, light blue and blue pipe.
@ Certified for red, blue, white and natural colors.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
[1] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the
    fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
    marked, as applicable, with the following fitting system designation(s):  ASTM F1807,
    ASTM F2159, ASSE 1061.

! Orange, natural, red, and teal green.
# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. 
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
  radiant heating system made in accordance with the current version of the ASTM F877
  standard intended for a maximum 100 psi water service and a maximum working temperature
  of 180°F.  System components consist of tubing and/or fittings.  To be installed in
  accordance with manufacturer’s instructions and the latest edition of the Uniform
  Plumbing Code™.
% This product is barrier tubing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.

! Orange, natural, red, and teal green.
# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. 
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
  radiant heating system made in accordance with the current version of the ASTM F877
  standard intended for a maximum 100 psi water service and a maximum working temperature
  of 180°F.  System components consist of tubing and/or fittings.  To be installed in
  accordance with manufacturer’s instructions and the latest edition of the Uniform
  Plumbing Code™.
% This product is barrier tubing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
[1] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the
    fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
    marked, as applicable, with the following fitting system designation(s):  ASTM F1807,
    ASTM F2159, ASSE 1061.

! Orange, natural, red, and teal green.
# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. 
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
  radiant heating system made in accordance with the current version of the ASTM F877
  standard intended for a maximum 100 psi water service and a maximum working temperature
  of 180°F.  System components consist of tubing and/or fittings.  To be installed in
  accordance with manufacturer’s instructions and the latest edition of the Uniform
  Plumbing Code™.
% This product is barrier tubing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.

! Orange, natural, red, and teal green.
# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. 
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
  radiant heating system made in accordance with the current version of the ASTM F877
  standard intended for a maximum 100 psi water service and a maximum working temperature
  of 180°F.  System components consist of tubing and/or fittings.  To be installed in
  accordance with manufacturer’s instructions and the latest edition of the Uniform
  Plumbing Code™.
% This product is barrier tubing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.

! Orange, natural, red, and teal green.
# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. 
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
  radiant heating system made in accordance with the current version of the ASTM F877
  standard intended for a maximum 100 psi water service and a maximum working temperature
  of 180°F.  System components consist of tubing and/or fittings.  To be installed in
  accordance with manufacturer’s instructions and the latest edition of the Uniform
  Plumbing Code™.
% This product is barrier tubing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
[1] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the
    fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
    marked, as applicable, with the following fitting system designation(s):  ASTM F1807,
    ASTM F2159, ASSE 1061.

# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. 
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
  radiant heating system made in accordance with the current version of the ASTM F877
  standard intended for a maximum 100 psi water service and a maximum working temperature
  of 180°F.  System components consist of tubing and/or fittings.  To be installed in
  accordance with manufacturer’s instructions and the latest edition of the Uniform
  Plumbing Code™.
? The UV material type 5306 is only applicable to the red, white, light blue and blue pipe.
@ Certified for red, blue, white and natural colors.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.

# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. 
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
  radiant heating system made in accordance with the current version of the ASTM F877
  standard intended for a maximum 100 psi water service and a maximum working temperature
  of 180°F.  System components consist of tubing and/or fittings.  To be installed in
  accordance with manufacturer’s instructions and the latest edition of the Uniform
  Plumbing Code™.
@ Certified for red, blue, white and natural colors.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
[1] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the
    fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
    marked, as applicable, with the following fitting system designation(s):  ASTM F1807,
    ASTM F2159, ASSE 1061.

! Orange, natural, red, and teal green.
# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. 
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
  radiant heating system made in accordance with the current version of the ASTM F877
  standard intended for a maximum 100 psi water service and a maximum working temperature
  of 180°F.  System components consist of tubing and/or fittings.  To be installed in
  accordance with manufacturer’s instructions and the latest edition of the Uniform
  Plumbing Code™.
% This product is barrier tubing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.

! Orange, natural, red, and teal green.
# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. 
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
  radiant heating system made in accordance with the current version of the ASTM F877
  standard intended for a maximum 100 psi water service and a maximum working temperature
  of 180°F.  System components consist of tubing and/or fittings.  To be installed in
  accordance with manufacturer’s instructions and the latest edition of the Uniform
  Plumbing Code™.
% This product is barrier tubing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
[1] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the
    fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
    marked, as applicable, with the following fitting system designation(s):  ASTM F1807,
    ASTM F2159, ASSE 1061.

# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. 
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
  radiant heating system made in accordance with the current version of the ASTM F877
  standard intended for a maximum 100 psi water service and a maximum working temperature
  of 180°F.  System components consist of tubing and/or fittings.  To be installed in
  accordance with manufacturer’s instructions and the latest edition of the Uniform
  Plumbing Code™.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
µ Certified pipe has a black inner layer with a red, white, or blue outer layer.

# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. 
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
  radiant heating system made in accordance with the current version of the ASTM F877
  standard intended for a maximum 100 psi water service and a maximum working temperature
  of 180°F.  System components consist of tubing and/or fittings.  To be installed in
  accordance with manufacturer’s instructions and the latest edition of the Uniform
  Plumbing Code™.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
µ Certified pipe has a black inner layer with a red, white, or blue outer layer.
[1] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the
    fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
    marked, as applicable, with the following fitting system designation(s):  ASTM F1807,
    ASTM F2159, ASSE 1061.

* Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

* Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

* Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

* Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

* Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

* Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

* Monowall pipe (natural); Skinned pipe (red, blue, white and orange) and Skinned (black
  plus red, blue, white, or orange) are certified for the following sizes: 3/8", 1/2",
  5/8", 3/4", 1", 1-1/4", 1-1/2" & 2"
@ PEX 5106: Meets the chlorine resistance requirements of ASTM F876 when tested in
  accordance with ASTM F2023. 
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

* Monowall pipe (natural); Skinned pipe (red, blue, white and orange) and Skinned (black
  plus red, blue, white, or orange) are certified for the following sizes: 3/8", 1/2",
  5/8", 3/4", 1", 1-1/4", 1-1/2" & 2"
@ PEX 5106: Meets the chlorine resistance requirements of ASTM F876 when tested in
  accordance with ASTM F2023. 
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

* Monowall pipe (natural); Skinned pipe (red, blue, white and orange); Skinned (black plus
  red, blue, white, or orange), and Barrier pipe (red, blue, white and orange) are
  certified for the following sizes: 3/8", 1/2", 5/8", 3/4", 1", 1-1/4", 1-1/2" & 2".
    
  Tubing certified against CSA B137.5 shall include the standard designation(s) of the
  fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
  marked, as applicable with the following fitting system designation(s): ASTM F1960, ASTM
  F1807, ASTM F2159, and ASTM F2098.
@ This tubing product has been evaluated against the performance requirements of ASTM
  F876/877 and CSA B137.5.  This product is not NSF Certified for use in a potable water
  distribution system.  This product has been evaluated for use in radiant floor heating,
  (NSF-rfh), applications only.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.

* Monowall pipe (natural); Skinned pipe (red, blue, white and orange); Skinned (black plus
  red, blue, white, or orange), and Barrier pipe (red, blue, white and orange) are
  certified for the following sizes: 3/8", 1/2", 5/8", 3/4", 1", 1-1/4", 1-1/2" & 2".
    
  Tubing certified against CSA B137.5 shall include the standard designation(s) of the
  fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
  marked, as applicable with the following fitting system designation(s): ASTM F1960, ASTM
  F1807, ASTM F2159, and ASTM F2098.
@ This tubing product has been evaluated against the performance requirements of ASTM
  F876/877 and CSA B137.5.  This product is not NSF Certified for use in a potable water
  distribution system.  This product has been evaluated for use in radiant floor heating,
  (NSF-rfh), applications only.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
[1] Product is a non-wetted fitting component.

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
[1] Product is a non-wetted fitting component.

! Certified for natural, red, white and blue without oxygen barrier. 
  Natural-PEX 5006; red, white, blue- PEX 5306
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

! Certified for natural, red, white and blue without oxygen barrier. 
  Natural-PEX 5006; red, white, blue- PEX 5306
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[1] Pipe Certified against CSA B137.5 shall include the standard designation(s) of the
    fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
    marked with the following fitting system designations:  ASTM F1807, ASTM F2159.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

[2] PEX rings are non-wetted components of PEX fitting systems.

[2] PEX rings are non-wetted components of PEX fitting systems.

! Certified for natural, red, white and blue without oxygen barrier. 
  Natural-PEX 5006; red, white, blue- PEX 5306
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

! Certified for natural, red, white and blue without oxygen barrier. 
  Natural-PEX 5006; red, white, blue- PEX 5306
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[1] Pipe Certified against CSA B137.5 shall include the standard designation(s) of the
    fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
    marked with the following fitting system designations:  ASTM F1807, ASTM F2159.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

[2] PEX rings are non-wetted components of PEX fitting systems.

[2] PEX rings are non-wetted components of PEX fitting systems.

* Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

* Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

* Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

* Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

* Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

* Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

# Authorized for blue, gray, natural, orange, red, and white.
* Product is barrier tubing.
@ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.

# Authorized for blue, gray, natural, orange, red, and white.
& Tubing certified against CSA B137.5 shall include the standard designation(s) of the
  fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
  marked, if applicable, with the following fitting system designations:  ASTM F1807, ASTM
  F2159, ASTM F2098, ASTM F2080, ASSE 1061 and ASTM F1960.
* Product is barrier tubing.
@ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.

$ Certified for blue and red without oxygen barrier.
* Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

$ Certified for blue and red without oxygen barrier.
* Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[3] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the
    fitting system(s) for which the tubing is recommended by the manufacturer, and shall be 
    marked with the following fitting system designations:  ASTM F1807, ASTM F2159, ASTM
    F1960, F2098.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

$ Certified for blue and red without oxygen barrier.
* Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

$ Certified for blue and red without oxygen barrier.
* Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

& Meets the chlorine resistance requirements of ASTM F1281 when tested in accordance with
  ASTM F2023.
* Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
~ Certified for Natural non-barrier single layer tubing for 1/8 - 3" sizes. Certified for
  red, white, blue 2-layer tubing for 1/2", 5/8", 3/4", 1" sizes only.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[6] Certified for red and white PEX 5106 monowall pipe.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

* Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[6] Certified for red and white PEX 5106 monowall pipe.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

[4] This is a PEX sleeve certified to ASTM F1960 & CSA B137.5. This is a non wetted product.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

[4] This is a PEX sleeve certified to ASTM F1960 & CSA B137.5. This is a non wetted product.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

! Certified for natural, red, white and blue without oxygen barrier.
  Natural - 5006
  Red, white, blue - 5006, 5106, 5206
* Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

! Certified for natural, red, white and blue without oxygen barrier.
  Natural - 5006
  Red, white, blue - 5006, 5106, 5206
* Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

* Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[7] Certified for the following:
    2-layer skinned (Natural PEX – White PE) pipe [PEX 5106]: 3/8", 1/2", 5/8",3/4" & 1"
    2-layer skinned (Natural PEX – Red, White or Blue PE) pipe [PEX 5306]: 3/8", 1/2",
    5/8",3/4" & 1"
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

* Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
~ Certified for Natural non-barrier single layer tubing for 1/8 - 3" sizes. Certified for
  red, white, blue 2-layer tubing for 1/2", 5/8", 3/4", 1" sizes only.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[8] PEX 5106 Certified for Red, Blue ,White 2-layer for 1/2", 5/8", 3/4", 1" sizes only.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

* Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
~ Certified for Natural non-barrier single layer tubing for 1/8 - 3" sizes. Certified for
  red, white, blue 2-layer tubing for 1/2", 5/8", 3/4", 1" sizes only.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[5] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the
    fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
    marked with the following fitting system designations:  ASTM F1807, ASTM F2159.
[8] PEX 5106 Certified for Red, Blue ,White 2-layer for 1/2", 5/8", 3/4", 1" sizes only.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

& Meets the chlorine resistance requirements of ASTM F1281 when tested in accordance with
  ASTM F2023.
* Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
~ Certified for Natural non-barrier single layer tubing for 1/8 - 3" sizes. Certified for
  red, white, blue 2-layer tubing for 1/2", 5/8", 3/4", 1" sizes only.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[5] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the
    fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
    marked with the following fitting system designations:  ASTM F1807, ASTM F2159.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

& Meets the chlorine resistance requirements of ASTM F1281 when tested in accordance with
  ASTM F2023.
* Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with  
  ASTM F2023.
~ Certified for Natural non-barrier single layer tubing for 1/8 - 3" sizes. Certified for
  red, white, blue 2-layer tubing for 1/2", 5/8", 3/4", 1" sizes only. Certified for red,
  white, blue, orange,natural 3-layer tubing for 1/2", 5/8", 3/4", 1" sizes only.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[7] Certified for red and white PEX 5106 monowall pipe.
[8] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the
    fitting system(s) for which the tubing is recommended by the manufacturer and shall be
    marked with the following fitting system designations: ASTM F1807, ASTM F2159, ASTM
    F1960, ASTM F2080, ASTM F2098 and ASSE 1061.

* Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with  
  ASTM F2023.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[7] Certified for red and white PEX 5106 monowall pipe.

[6] This is a PEX sleeve certified to ASTM F1960 & CSA B137.5. This is a non wetted product.

[6] This is a PEX sleeve certified to ASTM F1960 & CSA B137.5. This is a non wetted product.

$ Certified for blue and red with oxygen barrier.
* Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
[8] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the
    fitting system(s) for which the tubing is recommended by the manufacturer and shall be
    marked with the following fitting system designations: ASTM F1807, ASTM F2159, ASTM
    F1960, ASTM F2080, ASTM F2098 and ASSE 1061.

! Certified for natural, red, white and blue without oxygen barrier.
  Natural - 5006
  Red, white, blue - 5006, 5106, 5206
* Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with  
  ASTM F2023.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.

! Certified for natural, red, white and blue without oxygen barrier.
  Natural - 5006
  Red, white, blue - 5006, 5106, 5206
* Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with  
  ASTM F2023.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.

! Certified for natural, red, white and blue without oxygen barrier.
  Natural - 5006
  Red, white, blue - 5006, 5106, 5206
* Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with  
  ASTM F2023.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.

* Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with  
  ASTM F2023.
~ Certified for Natural non-barrier single layer tubing for 1/8 - 3" sizes. Certified for
  red, white, blue 2-layer tubing for 1/2", 5/8", 3/4", 1" sizes only. Certified for red,
  white, blue, orange,natural 3-layer tubing for 1/2", 5/8", 3/4", 1" sizes only.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

* Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with  
  ASTM F2023.
~ Certified for Natural non-barrier single layer tubing for 1/8 - 3" sizes. Certified for
  red, white, blue 2-layer tubing for 1/2", 5/8", 3/4", 1" sizes only. Certified for red,
  white, blue, orange,natural 3-layer tubing for 1/2", 5/8", 3/4", 1" sizes only.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[5] PEX 5106 Certified for Red, Blue ,White 2-layer for 1/2", 5/8", 3/4", 1" sizes only.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

* Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with  
  ASTM F2023.
~ Certified for Natural non-barrier single layer tubing for 1/8 - 3" sizes. Certified for
  red, white, blue 2-layer tubing for 1/2", 5/8", 3/4", 1" sizes only. Certified for red,
  white, blue, orange,natural 3-layer tubing for 1/2", 5/8", 3/4", 1" sizes only.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[4] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the
    fitting system(s) for which the tubing is recommended by the manufacturer, and shall be 
    marked with the following fitting system designations:  ASTM F1807, ASTM F2159, ASTM
    F1960, F2098.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

* Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with  
  ASTM F2023.
~ Certified for Natural non-barrier single layer tubing for 1/8 - 3" sizes. Certified for
  red, white, blue 2-layer tubing for 1/2", 5/8", 3/4", 1" sizes only. Certified for red,
  white, blue, orange,natural 3-layer tubing for 1/2", 5/8", 3/4", 1" sizes only.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[4] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the
    fitting system(s) for which the tubing is recommended by the manufacturer, and shall be 
    marked with the following fitting system designations:  ASTM F1807, ASTM F2159, ASTM
    F1960, F2098.
[5] PEX 5106 Certified for Red, Blue ,White 2-layer for 1/2", 5/8", 3/4", 1" sizes only.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

$ Certified for blue and red with oxygen barrier.
* Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.

$ Certified for blue and red with oxygen barrier.
* Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.

$ Certified for blue and red with oxygen barrier.
* Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.

$ Certified for blue and red with oxygen barrier.
* Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
[4] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the
    fitting system(s) for which the tubing is recommended by the manufacturer, and shall be 
    marked with the following fitting system designations:  ASTM F1807, ASTM F2159, ASTM
    F1960, F2098.

$ Certified for blue and red with oxygen barrier.
* Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.

* Natural (Solid Wall) PEX Pipe Certified 3/8" - 2"sizes. Red, blue, white or orange PEX
  pipe (2
  layer pipe - natural with colored adhesive pipe) certified for 3/8" - 1" sizes. Tubing
  certified
  against CSA B137.5 shall include the standard designation(s) of the fitting system(s)
  for which the
  tubing is recommended by the manufacturer, and shall be marked, as applicable, with the
  following
  fitting system designation(s): ASTM F1960, ASTM F1807, ASTM F2159, and ASTM F2098.
@ PEX 5106: Meets the chlorine resistance requirements of ASTM F876 when tested in
  accordance with ASTM F2023.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

* Natural (Solid Wall) PEX Pipe Certified 3/8" - 2"sizes. Red, blue, white or orange PEX
  pipe (2
  layer pipe - natural with colored adhesive pipe) certified for 3/8" - 1" sizes. Tubing
  certified
  against CSA B137.5 shall include the standard designation(s) of the fitting system(s)
  for which the
  tubing is recommended by the manufacturer, and shall be marked, as applicable, with the
  following
  fitting system designation(s): ASTM F1960, ASTM F1807, ASTM F2159, and ASTM F2098.
@ PEX 5106: Meets the chlorine resistance requirements of ASTM F876 when tested in
  accordance with ASTM F2023.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

* Monowall pipe (natural); Skinned pipe (red, blue, white and orange); and Barrier pipe
  (red, blue, white and orange) are certified for the following sizes: 3/8", 1/2", 5/8",
  3/4", 1", 1 1/2", & 2".
  
  Tubing certified against CSA B137.5 shall include the standard designation(s) of the
  fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
  marked, as applicable with the following fitting system designation(s): ASTM F1960, ASTM
  F1807, ASTM F2159, and ASTM F2098
@ This tubing product has been evaluated against the performance requirements of ASTM
  F876/877 and CSA
  which the tubing is recommended by the 
  B137.5. This product is not NSF Certified for use in a potable water distribution
  system. This
  product has been evaluated for use in radiant floor heating, (NSF-rfh), applications only
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.

* Monowall pipe (natural); Skinned pipe (red, blue, white and orange); and Barrier pipe
  (red, blue, white and orange) are certified for the following sizes: 3/8", 1/2", 5/8",
  3/4", 1", 1 1/2", & 2".
  
  Tubing certified against CSA B137.5 shall include the standard designation(s) of the
  fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
  marked, as applicable with the following fitting system designation(s): ASTM F1960, ASTM
  F1807, ASTM F2159, and ASTM F2098
@ This tubing product has been evaluated against the performance requirements of ASTM
  F876/877 and CSA
  which the tubing is recommended by the 
  B137.5. This product is not NSF Certified for use in a potable water distribution
  system. This
  product has been evaluated for use in radiant floor heating, (NSF-rfh), applications only
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.

# The Flame Spread Index and Smoke Developed Index for 1/2"-2" tubing are based on when
  tubing is field insulated with 1/2" JM  Microlok HP Hi performance fiberglass insulation
  as per RIFENG installation instructions. The 3/8" tubing is not insulated.
$ Certified for blue, natural, red, and white without oxygen barrier.
* Flame Spread Index and Smoke Developed Index based on minimum spacing of 18 inches
  between tubing runs.  Tubing shall be marked [NSF®-fs ASTM E84 FS<=25/SD<=50].

$ Certified for blue, natural, red, and white without oxygen barrier.
& 3/8" tubing (without insulation) shall be marked [cNSF®-fs ULc S102.2 FS <=25/SD <=50].
  1/2" - 2" tubing (with insulation),  Flame Spread Index and Smoke Developed Index based
  on when the tubing is field insulated with JM Microlok HP Hi Performance Fiberglass
  insulation as per the pipe manufacturer's installation instructions.  Tubing shall be
  Marked [cNSF®-fs ULc S102.2 FS<=25/SD<=50].

$ Certified for blue, natural, red, and white without oxygen barrier.
* Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

! Certified for natural, red, white and blue without oxygen barrier.
  Natural - 5006
  Red, white, blue - 5006, 5106, 5206
* Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

! Certified for natural, red, white and blue without oxygen barrier.
  Natural - 5006
  Red, white, blue - 5006, 5106, 5206
* Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

$ Certified for blue, natural, red, and white with oxygen barrier.
* Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.

$ Certified for blue, natural, red, and white with oxygen barrier.
* Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.

# Authorized for gray and white.
@ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

@ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

# Authorized for gray and white.
& Tubing certified against CSA B137.5 shall include the standard designation(s) of the
  fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
  marked, if applicable, with the following fitting system designations: ASTM F1807, ASTM
  F2159, ASTM F2098, ASTM F2080, ASSE 1061 and ASTM F1960.
@ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

& Tubing certified against CSA B137.5 shall include the standard designation(s) of the
  fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
  marked, if applicable, with the following fitting system designations: ASTM F1807, ASTM
  F2159, ASTM F2098, ASTM F2080, ASSE 1061 and ASTM F1960.
@ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

# Authorized for gray and white.
@ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

@ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

# Authorized for gray and white.
& Tubing certified against CSA B137.5 shall include the standard designation(s) of the
  fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
  marked, if applicable, with the following fitting system designations: ASTM F1807, ASTM
  F2159, ASTM F2098, ASTM F2080, ASSE 1061 and ASTM F1960.
@ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

& Tubing certified against CSA B137.5 shall include the standard designation(s) of the
  fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
  marked, if applicable, with the following fitting system designations: ASTM F1807, ASTM
  F2159, ASTM F2098, ASTM F2080, ASSE 1061 and ASTM F1960.
@ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.