NSF Product and Service Listings

These NSF Official Listings are current as of Thursday, September 23, 2021 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.

Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/Pools/Listings.asp?ProductType=ASME1908&


ANSI/APSP 16 (ASME/ANSI A112.19.8)
Suction Fittings for Use in Swimming Pools, Wading Pools,
Spas, Hot Tubs and Whirlpool Bathtub Appliances



 
AquaStar Pool Products, Inc. 
2340 Palma Drive
#104 
Ventura, CA 93003 
United States 
877-768-2717
Visit this company's website

Facility : Ventura, CA
Suction Fitting Model Sump Model or Field Type Orientation (Wall and/or Floor) Design Flow Rate (GPM)

10AVR Series[1] [2]
10AVR-10f_A-1.5b_B3_C0.4_D0.5_E2.5_F16 Bottom Floor 72
      
10AVR-10f_A-2.5b_B3_C0.4_D0.5_E3.8_F16 Bottom Floor 96
      
10AVR-10f_A-2b_B3_C0.4_D0.5_E3.9_F16 Bottom Floor 76
      
10AVR-10f_A-3b_B3_C0.4_D0.5_E3.5_F16 Bottom Floor 96
      
10AVR-10w_A-2.5b_B3_C0.4_D0.5_E3.8_F16 Bottom Wall 96
      
10AVR-10w_A-2b_B3_C0.4_D0.5_E3.9_F16 Bottom Wall 76
      
10AVR-10w_A-3b_B3_C0.4_D0.5_E3.5_F16 Bottom Wall 96

[1] Certified to ANSI/APSP/ICC-16-2017 and NSF/ANSI/CAN Standard 50.
[2] NSF Listed units are black, light gray, dark gray, blue, tan and white

32CDAV Series[1] [2]
      
32CDAV-32f_A-2.5x2b_B2.98_C0.95_D0.2_E0.475_F16 Two Outer Port Sump Floor 90
      
32CDAV-32f_A-2.5x3b_B2.98_C0.95_D0.2_E0.475_F16 Three Port Sump Floor 150
      
32CDAV-32w_A-2x2b_B2.98_C0.95_D0.2_E0.475_F16 Two Outer Port Sump Wall 136

[1] Certified to ANSI/APSP/ICC-16-2017 and NSF/ANSI/CAN Standard 50.
[2] NSF Listed units are black, light gray, dark gray, blue, tan and white

32CDFL Series[1] [2]
      
32CDFL-32f_A-2.5x2b_B2.98_C0.95_D0.2_E0.475_F16 Two Outer Port Sump Floor 150
      
32CDFL-32f_A-2.5x3b_B2.98_C0.95_D0.2_E0.475_F16 Three Port Sump Floor 200
      
32CDFL-32w_A-2.5b_B2.98_C0.95_D0.2_E0.475_F16 Center Port Sump Wall 120
      
32CDFL-32w_A-2x2b_B2.98_C0.95_D0.2_E0.475_F16 Two Outer Port Sump Wall 150
      
32CDFLFG-32f_A-2.5x2b_B2.98_C0.95_D0.2_E0.475_F16 Two Outer Port Sump Floor 150
      
32CDFLFG-32f_A-2.5x3b_B2.98_C0.95_D0.2_E0.475_F16 Three Port Sump Floor 200
      
32CDFLFG-32w_A-2.5b_B2.98_C0.95_D0.2_E0.475_F16 Center Port Sump Wall 120
      
32CDFLFG-32w_A-2x2b_B2.98_C0.95_D0.2_E0.475_F16 Two Outer Port Sump Wall 150
      
32CDFLFR-32f_A-2.5x2b_B2.98_C0.95_D0.2_E0.475_F16 Two Outer Port Sump Floor 150
      
32CDFLFR-32f_A-2.5x3b_B2.98_C0.95_D0.2_E0.475_F16 Three Port Sump Floor 200
      
32CDFLFR-32w_A-2.5b_B2.98_C0.95_D0.2_E0.475_F16 Center Port Sump Wall 120
      
32CDFLFR-32w_A-2x2b_B2.98_C0.95_D0.2_E0.475_F16 Two Outer Port Sump Wall 150
      
32CDFLV-32f_A-2.5x2b_B2.98_C0.95_D0.2_E0.475_F16 Two Outer Port Sump Floor 150
      
32CDFLV-32f_A-2.5x3b_B2.98_C0.95_D0.2_E0.475_F16 Three Port Sump Floor 200
      
32CDFLV-32w_A-2.5b_B2.98_C0.95_D0.2_E0.475_F16 Center Port Sump Wall 120
      
32CDFLV-32w_A-2x2b_B2.98_C0.95_D0.2_E0.475_F16 Two Outer Port Sump Wall 150

[1] Certified to ANSI/APSP/ICC-16-2017 and NSF/ANSI/CAN Standard 50.
[2] NSF Listed units are black, light gray, dark gray, blue, tan and white

A10RCFR Series[1] [2]
      
A10RCFR-10f_A-1.5b_B0_C0_D0_E0_F16 N/A[3] Floor 63
      
A10RCFR-10f_A-2,1.5b_B3_C0.4_D0.5_E1.5_F16 Bottom[4] Floor 200
      
A10RCFR-10f_A-2.5b_B0_C0_D0_E0_F16 N/A[3] Floor 119
      
A10RCFR-10f_A-2.5b_B3_C0.4_D0.5_E3.75_F16 Bottom[4] Floor 170
      
A10RCFR-10f_A-2b_B0_C0_D0_E0_F16 N/A[3] Floor 119
      
A10RCFR-10f_A-3b_B0_C0_D0_E0_F16 N/A[3] Floor 138
      
A10RCFR-10f_A-3b_B3_C0.4_D0.5_E3.25_F16 Bottom[4] Floor 170
      
A10RCFR-10f_A-3b_B3_C0.4_D0.5_E3.75_F16 Bottom[4] Floor 170
      
A10RCFR-10f_A-6b_B9.25_C0.4_D0.5_E1.7_F16 Bottom[4] Floor 200
      
A10RCFR-10w_A-1.5b_B0_C0_D0_E0_F16 N/A[3] Wall 63
      
A10RCFR-10w_A-2.5b_B0_C0_D0_E0_F16 N/A[3] Wall 100
      
A10RCFR-10w_A-2.5b_B3_C0.4_D0.5_E3.75_F16 Bottom[4] Wall 170
      
A10RCFR-10w_A-2b_B0_C0_D0_E0_F16 N/A[3] Wall 119
      
A10RCFR-10w_A-2b_B3_C0.4_D0.5_E.7_F16 Bottom[4] Wall 170
      
A10RCFR-10w_A-3b_B0_C0_D0_E1.5_F16 N/A[3] Wall 119
      
A10RCFR-10w_A-3b_B3_C0.4_D0.5_E3.25_F16 Bottom[4] Wall 170
      
A10RCFR-10w_A-6b_B9.25_C0.4_D0.5_E1.7_F16 Bottom[4] Wall 200

[1] Certified to ANSI/APSP/ICC-16-2017 and NSF/ANSI/CAN Standard 50.
[2] NSF Listed units are black, light gray, dark gray, blue, tan and white
[3] Sumpless cover.
[4] Represents sump port location.

CC10 Series[1] [2]
      
CC10-10f_A-1.5b_B3_C0.4_D0.5_E2.5_F16 Bottom Floor 80
      
CC10-10f_A-2.5b_B3_C0.4_D0.5_E3.8_F16 Bottom Floor 119
      
CC10-10f_A-2b_B3_C0.4_D0.5_E3.9_F16 Bottom Floor 106
      
CC10-10f_A-3b_B3_C0.4_D0.5_E3.5_F16 Bottom Floor 156
      
CC10-10w_A-1.5b_B3_C0.4_D0.5_E2.5_F16 Bottom Wall 80
      
CC10-10w_A-2.5b_B3_C0.4_D0.5_E3.8_F16 Bottom Wall 119
      
CC10-10w_A-2b_B3_C0.4_D0.5_E3.9_F16 Bottom Wall 106
      
CC10-10w_A-3b_B3_C0.4_D0.5_E3.5_F16 Bottom Wall 156

[1] Certified to ANSI/APSP/ICC-16-2017 and NSF/ANSI/CAN Standard 50.
[2] NSF Listed units are black, light gray, dark gray, blue, tan and white

CC8 Series[1] [2]
      
CC8-8f_A-1.5b_B3_C0.4_D0.4_E1.1_F16 Bottom Floor 63
      
CC8-8f_A-2.5b_B3_C0.4_D0.4_E2.3_F16 Bottom Floor 106
      
CC8-8f_A-2b_B3_C0.4_D0.4_E2.5_F16 Bottom Floor 84
      
CC8-8f_A-3b_B3_C0.4_D0.4_E2_F16 Bottom Floor 120
      
CC8-8w_A-1.5b_B3_C0.4_D0.4_E1.1_F16 Bottom Wall 63
      
CC8-8w_A-2.5b_B3_C0.4_D0.4_E2.3_F16 Bottom Wall 106
      
CC8-8w_A-2b_B3_C0.4_D0.4_E2.5_F16 Bottom Wall 84
      
CC8-8w_A-3b_B3_C0.4_D0.4_E2_F16 Bottom Wall 120

[1] Certified to ANSI/APSP/ICC-16-2017 and NSF/ANSI/CAN Standard 50.
[2] NSF Listed units are black, light gray, dark gray, blue, tan and white




 
Current Systems, Inc. 
1645 Donlon Street
Suite 104 
Ventura, CA 93003 
United States 
866-372-8886 
805-482-1091
Visit this company's website

Facility : Ventura, CA
Suction Fitting Model Sump Model or Field Type Orientation (Wall and/or Floor) Design Flow Rate (GPM)

Riverflow System[1] [2] [3]
      
RFS 200 RFS 125 Floor 2440
RFS 200 RFS 125 Wall 2440

[1] Certified to ANSI/APSP/ICC-16 2017 and NSF/ANSI Standard 50
[2] NSF Listed unit is white.
[3] Certified for use with Riverflow Axial Flow Pump CF104.




 
Hayward Industries, Inc. 
400 Connell Drive
Suite 6100 
Berkeley Heights, NJ 07922 
United States 
908-351-5400
Visit this company's website

Facility : Clemmons, NC
Suction Fitting Model Sump Model or Field Type Orientation (Wall and/or Floor) Design Flow Rate (GPM)

8" Round Suction Outlet Cover[1]
      
WG1048E[2] SP1048A
SP1049A
SP1051A
SP1052A
SP1053A
SP1054A
SP1153A
SP1154A
SP1154AS
WG1048A
WG1049A
WG1051A
WG1052A
WG1053A
WG1054A
Floor 125.6
WG1048E[2] SP1048A
SP1049A
SP1051A
SP1052A
SP1053A
SP1054A
SP1153A
SP1154A
SP1154AS
WG1048A
WG1049A
WG1051A
WG1052A
WG1053A
WG1054A
Wall 72
      
WG1048E1[3] SP1048A
SP1049A
SP1051A
SP1052A
SP1053A
SP1054A
SP1153A
SP1154A
SP1154AS
WG1048A
WG1049A
WG1051A
WG1052A
WG1053A
WG1054A
Floor 125.6

[1] Certified to ASME A112.19.8-2007 and NSF/ANSI Standard 50.
[2] NSF Listed units are black, dark gray, gray, and white.
[3] NSF Listed unit is white.


NOTE: ANSI/APSP 16-2011 has replaced ANSI/ASME A112.19.8-2007, and addenda A112.19.8a-2008 and
      A112.19.8b-2009 which have been withdrawn.

Facility : Jiangsu Province, China
Suction Fitting Model Sump Model or Field Type Orientation (Wall and/or Floor) Design Flow Rate (GPM)
      
WG1048E[2] SP1048A
SP1049A
SP1051A
SP1052A
SP1053A
SP1054A
SP1153A
SP1154A
SP1154AS
WG1048A
WG1049A
WG1051A
WG1052A
WG1053A
WG1054A
Floor 125.6
WG1048E[2] SP1048A
SP1049A
SP1051A
SP1052A
SP1053A
SP1054A
SP1153A
SP1154A
SP1154AS
WG1048A
WG1049A
WG1051A
WG1052A
WG1053A
WG1054A
Wall 72

[1] Certified to ASME A112.19.8-2007 and NSF/ANSI Standard 50.
[2] NSF Listed units are black, dark gray, gray, and white.


NOTE: ANSI/APSP 16-2011 has replaced ANSI/ASME A112.19.8-2007, and addenda A112.19.8a-2008 and
      A112.19.8b-2009 which have been withdrawn.


 
Neptune-Benson, Inc. 
334 Knight Street
Suite 3100 
Warwick, RI 02886 
United States 
401-821-2200
Visit this company's website

Facility : # 1 USA
Suction Fitting Model Sump Model or Field Type Orientation (Wall and/or Floor) Design Flow Rate (GPM)

30" x 30" Suction Outlet Cover[1] [2] [3]
      
AEGIS[4] [5] Field Fabricated-FG2 Floor 1432
AEGIS[4] [5] Field Fabricated-FG2 Wall 1120
      
AEGIS[6] 242424SSMD-AE-8 Floor 1432
AEGIS[6] 242424SSMD-AE-8 Wall 1120
      
AEGIS[7] Reference Footnote [7] Floor 1504

[1] Certified to ASME A112.19.8a-2008.
[2] NSF Listed units have a white cover.
[3] For single and multiple drain use.
[4] Per ASME A112.19.8a-2008, the use of the suction fitting with a field fabricated sump
    built in accordance with Figure 2 of that standard shall be permitted when specified and
    designed by a Registered Design Professional. Installers should also ensure that the
    drain cover is installed, fastened and secured according to the drain cover and the sump
    manufacturer's instructions.
[5] This cover is approved for use over a field fabricated main drain sump that meets the
    eequirements of the figure 2 in the ASME A112.19.8a-
    2008 Standard for Sunction Fittings, providing the sump is qualified by a Registered
    Design professional and installed per the manufacturer's instructions.
[6] The sumps are stainless steel.
[7] Drain cover tested with a centrally located in floor 12 inch diameter pipe (No Sump).
    Testing qualifies use with 12 inch diameter pipe or smaller.




 
Neptune-Benson, Inc. formerly known as Lawson Aquatics, Inc. 
334 Knight Street
Suite 3100 
Warwick, RI 02886 
United States 
401-821-2200
Visit this company's website

Facility : # 1 USA
Suction Fitting Model Sump Model or Field Type Orientation (Wall and/or Floor) Design Flow Rate (GPM)

6"[1] [2] [3]
      
MLD-SG-06 MLD-SG-06 Floor 44
MLD-SG-06 MLD-SG-06 Wall 49

[1] Certified to ASME A112.19.8a-2008.
[2] NSF Listed units black and white.
[3] Suction cover and grate Certified to NSF 50.

9" x 9"[1] [2] [3]
      
MLD-FGD-0909[4] Field Fabricated - Figure 2 Floor 261
MLD-FGD-0909[4] Field Fabricated - Figure 2 Wall 248
      
MLD-SG-0909 Super Sump™ Floor 261
MLD-SG-0909 Super Sump™ Wall 248

[1] Certified to ASME A112.19.8a-2008.
[2] NSF Listed units black and white.
[3] Suction cover and grate Certified to NSF 50.
[4] Only the drain cover has been Certified by NSF International to ANSI/APSP 16 (ASME
    A112.19.-2008). The flow rating for the drain cover is approved for use over a field
    fabricated main drain sump that meets the requirements of Figure 2 and the stipulations
    of Mandatory Appendix II of ANSI/APSP 16 (ASME A112.19.-2008).

12" x 12"[1] [2] [3]
      
MLD-FGD-1212[4] Field Fabricated - Figure 2 Floor 365
MLD-FGD-1212[4] Field Fabricated - Figure 2 Wall 365
      
MLD-SG-1212 Super Sump™ Wall 340
MLD-SG-1212 Super Sump™ Floor 400

[1] Certified to ASME A112.19.8a-2008.
[2] NSF Listed units black and white.
[3] Suction cover and grate Certified to NSF 50.
[4] Only the drain cover has been Certified by NSF International to ANSI/APSP 16 (ASME
    A112.19.-2008). The flow rating for the drain cover is approved for use over a field
    fabricated main drain sump that meets the requirements of Figure 2 and the stipulations
    of Mandatory Appendix II of ANSI/APSP 16 (ASME A112.19.-2008).

18" x 18"[1] [2] [3]
      
MLD-FGD-1818[4] Field Fabricated - Figure 2 Floor 816
MLD-FGD-1818[4] Field Fabricated - Figure 2 Wall 712
      
MLD-SG-1818 Super Sump™ Floor 816
MLD-SG-1818 Super Sump™ Wall 712

[1] Certified to ASME A112.19.8a-2008.
[2] NSF Listed units black and white.
[3] Suction cover and grate Certified to NSF 50.
[4] Only the drain cover has been Certified by NSF International to ANSI/APSP 16 (ASME
    A112.19.-2008). The flow rating for the drain cover is approved for use over a field
    fabricated main drain sump that meets the requirements of Figure 2 and the stipulations
    of Mandatory Appendix II of ANSI/APSP 16 (ASME A112.19.-2008).

18" x 36"[1] [2] [3]
      
FI-SG-1836[4] [5] FI-SG-1836 Wall 1496
FI-SG-1836[4] [5] FI-SG-1836 Floor 2080
      
FI-SG-1836[5] Field Fabricated - Figure 2 Floor 2401
      
MLD-FG-1836 Field Fabricated - Figure 2 Floor 2401

[1] Certified to ASME A112.19.8a-2008.
[2] NSF Listed units black and white.
[3] Suction cover and grate Certified to NSF 50.
[4] Only the drain cover has been Certified by NSF International to ANSI/APSP 16 (ASME
    A112.19.-2008). The flow rating for the drain cover is approved for use over a field
    fabricated main drain sump that meets the requirements of Figure 2 and the stipulations
    of Mandatory Appendix II of ANSI/APSP 16 (ASME A112.19.-2008).
[5] Prefabricated fiberglass sump with 10" connection.

18" x 54"[1] [2] [3]
      
FI-SG-1854[5] Field Fabricated - Figure 2 Floor 4269
      
MLD-FG-1854 Field Fabricated - Figure 2 Floor 4269

[1] Certified to ASME A112.19.8a-2008.
[2] NSF Listed units black and white.
[3] Suction cover and grate Certified to NSF 50.
[5] Prefabricated fiberglass sump with 10" connection.

18" x 72"[1] [2] [3]
      
FI-SG-1872[5] Field Fabricated - Figure 2 Floor 4518
      
MLD-FG-1872 Field Fabricated - Figure 2 Floor 4518

[1] Certified to ASME A112.19.8a-2008.
[2] NSF Listed units black and white.
[3] Suction cover and grate Certified to NSF 50.
[5] Prefabricated fiberglass sump with 10" connection.


NOTE: ANSI/APSP 16-2011 has replaced ANSI/ASME A112.19.8-2007, and addenda A112.19.8a-2008 and
      A112.19.8b-2009 which have been withdrawn.


 
Paddock Pool Equipment Co, Inc. 
Paddock Parkway
P.O. Box 11676 
Rock Hill, SC 29731 
United States 
803-324-1111
Visit this company's website

Facility : Rock Hill, SC
Suction Fitting Model Sump Model or Field Type Orientation (Wall and/or Floor) Design Flow Rate (GPM)

Suction Fitting for Multiple Drain Use Only[1] [2] [3] [4]
      
2020PCDC 1414ESMD Floor 1200
      
2020PCGO[5] 2040ESMD Floor 1960
2020PCGO[5] 2040ESMD Wall 1960
      
2040PCGO[5] 2040ESMD Floor 1960
2040PCGO[5] 2040ESMD Wall 1960
      
2424PCDC 1818ESMD Floor 1420
2424PCDC 1818ESMD Wall 1420
      
2424PCFC 1818ESMD Floor 915
2424PCFC 1818ESMD Wall 915
      
2448PCFC[6] 2448ESMD Floor 3500
2448PCFC[6] 2448ESMD Wall 3000

[1] For multiple drain use only.
[2] Per ASME A112.19.8a-2008, the use of the suction fitting with a field fabricated sump
    built in accordance with Figure 2 of that Standard shall be permitted when specified and
    designed by a registered design professional.  Installers should also ensure that the
    drain cover is installed, fastened, and secured according to the drain cover and the
    sump manufacturer's instructions.
[3] For use with 8-32x1/4" Pan Head Phillips # 2 316L SS.
[4] Certified to ASME A112.19.8a-2008 and NSF/ANSI Standard 50.
[5] Utilizes two (2) 2020PCGO suction fittings.
[6] Utilizes two (2) 2424PCFC suction fittings.


NOTE: ANSI/APSP 16-2011 has replaced ANSI/ASME A112.19.8-2007, and addenda A112.19.8a-2008 and
      A112.19.8b-2009 which have been withdrawn.


 
Praher Plastics Canada Ltd. 
101 Saunders Road
Barrie, ON L4M 6E7 
Canada 
705-725-1100

Facility : Barrie, Ontario, Canada
Suction Fitting Model Sump Model or Field Type Orientation (Wall and/or Floor) Design Flow Rate (GPM)

10" x 10" Submerged Suction Outlet Cover[1] [2] [3]
      
FG10VG Field Fabricated-FG2 Floor 108
FG10VG Field Fabricated-FG2 Wall 108

[1] Certified to ASME A112.19.8b-2009.
[2] This cover is approved for use over a field fabricated main drain sump that meets the
    requirements of figure 2 in the ASME A112.19.8B-2009 Standard for Suction Fittings,
    providing the sump is qualified by a Registered Design Professional and installed per
    the manufacturer's instructions.
[3] NSF Listed unit is white.


NOTE: ANSI/APSP 16-2011 has replaced ANSI/ASME A112.19.8-2007, and addenda A112.19.8a-2008 and
      A112.19.8b-2009 which have been withdrawn.


 
SwimEx, Inc. 
390 Airport Road
Fall River, MA 02720 
United States 
800-877-7946 
508-646-1600

Facility : Fall River, MA
Suction Fitting Model Sump Model or Field Type Orientation (Wall and/or Floor) Design Flow Rate (GPM)

SwimEx Stainless Steel Cover[1] [2] [3] [4]
      
70157 - 55" x 19" SwimEx Paddlewheel System Wall N/A
      
71196 - 53" x 39" SwimEx Paddlewheel System Wall N/A
      
72028 - 55" x 29" SwimEx Paddlewheel System Wall N/A

[1] Certified to ANSI/APSP 16-2017.
[2] This submerged suction outlet cover is Certified for use only in a SwimEx Paddlewheel
    System with the following models: 
    Commercial Models  - SX400OT, SX470T, SX500OT, SX500T,  SX600T, SX700T, SX800T, ASX900T,
    
                         and SX1000T
    Residential Models - SX400OS, SX480S, SX500OS, SX500S, SX6000S, and SX10000S
[3] Motor controller frequency can not exceed 44.42 Hz for models utilizing the 7.5 hp pump.
[4] A flow rate was not established since the SwimEx submerged suction outlet covers were
    tested as part of a SwimEx Paddlewheel System and are for use only with a SwimEx
    Paddlewheel System.




 
Waterway Plastics 
2200 East Sturgis Road
Oxnard, CA 93030 
United States 
805-981-0262

Facility : Oxnard, CA
Suction Fitting Model Sump Model or Field Type Orientation (Wall and/or Floor) Design Flow Rate (GPM)

8" Round Ultra Suction Outlet[1] [2]
      
640-81xx V 672-2430 (concrete pools) Floor 110
640-81xx V 672-2430 (vinyl pools) Floor 110
640-81xx V 672-2430 (concrete pools) Wall 92
640-81xx V 672-2430 (vinyl pools) Wall 92

[1] Certified to ASME A112.19.8a-2008
[2] X Indicates color code.  0 is the code for color white.  NSF Listed unit is white.

10" Ultra Retro Suction Outlet[3] [11]
      
640-212X V[12] 642-3190[4] Floor 178
      
640-212X V[13] 642-3190[4] Wall 160
      
640-212X V[12] 642-3190[4] Wall 132
      
640-213X V[12] 642-3180[5] Floor 178
      
640-213X V[13] 642-3180[5] Wall 160
      
640-213X V[12] 642-3180[5] Wall 132
      
640-214X V[12] 642-3180[5] Floor 178
      
640-214X V[13] 642-3180[5] Wall 160
      
640-214X V[12] 642-3180[5] Wall 132
      
640-212X V[12] 215-8290[6] Floor 178
      
640-212X V[13] 215-8290[6] Wall 160
      
640-212X V[12] 215-8290[6] Wall 132

[3] X denotes color. Color codes are:
    0     - White
    1     - Black
    7     - Gray
    9B    - Beige
    9 DKG - Dark Gray
    NSF Listed units are white, black, gray, beige and dark gray.
[4] Adapter plate model number 642-3190 is used for new applications.
[5] Adapter plate model number 642-3180 is used for retrofit applications.
[6] This cover is approved for use over a field fabricated main drain sump that meets the
    requirements of figure 2 in the ASME A112.19.8a-2008 Standard for Suction Fittings,
    providing the sump is qualified by a Registered Design Professional and installed per
    the manufacturer's instructions
[11] Certified to ASME A112.19.8a-2017.
[12] 2" pipe, sch 40 PVC.
[13] 3" pipe, sch 40 PVC.

24" x 24"[1] [3] [6]
      
640-476X V Field Fabricated - Figure 2 Floor 2035

[1] Certified to ASME A112.19.8a-2008
[3] X denotes color. Color codes are:
    0     - White
    1     - Black
    7     - Gray
    9B    - Beige
    9 DKG - Dark Gray
    NSF Listed units are white, black, gray, beige and dark gray.
[6] This cover is approved for use over a field fabricated main drain sump that meets the
    requirements of figure 2 in the ASME A112.19.8a-2008 Standard for Suction Fittings,
    providing the sump is qualified by a Registered Design Professional and installed per
    the manufacturer's instructions

Clover Leaf[1] [3]
      
640-100X V 642-1020 Floor 840
640-100X V 642-1020 Wall 508

[1] Certified to ASME A112.19.8a-2008
[3] X denotes color. Color codes are:
    0     - White
    1     - Black
    7     - Gray
    9B    - Beige
    9 DKG - Dark Gray
    NSF Listed units are white, black, gray, beige and dark gray.

Diamond Strip Drain Submerged Suction Outlet[1] [2]
      
640-134X V Center Piped Sump [7] Floor 280
      
640-134X V Two Outer Piped Sump [7] Floor 320
      
640-134X V Center Piped Sump [7] Wall 216
      
640-134X V Two Outer Piped Sump [7] Wall 216
      
640-135X V Center Piped Sump [8] Floor 280
      
640-135X V Two Outer Piped Sump [8] Floor 320
      
640-135X V Center Piped Sump [8] Wall 216
      
640-135X V Two Outer Piped Sump [8] Wall 216
      
640-136X V Center Piped Sump [9] Floor 280
      
640-136X V Two Outer Piped Sump [9] Floor 320
      
640-136X V Center Piped Sump [9] Wall 216
      
640-136X V Two Outer Piped Sump [9] Wall 216
      
640-137X V Center Piped Sump [10] Floor 280
      
640-137X V Two Outer Piped Sump [10] Floor 320
      
640-137X V Center Piped Sump [10] Wall 216
      
640-137X V Two Outer Piped Sump [10] Wall 216

[1] Certified to ASME A112.19.8a-2008
[2] X Indicates color code.  0 is the code for color white.  NSF Listed unit is white.
[7] For vinyl pool installations.
[8] For fiberglass pool installations.
[9] For concrete pool installations.
[10] For field-built sump installations. The sump must be formed in accordance with the
     cover/grate manufacturer’s installation instructions   or exceed the minimum dimensions
     of the SOFA model used for certifying the cover/grate.

Ultra Strip Drain Submerged Suction Outlet Model[1] [3]
      
640-132X V 642-1320 (concrete pools) Center Piped Sump Floor 288
640-132X V 642-1320 (concrete pools) Two Outer Piped Sump Floor 352
640-132X V 642-1320 (concrete pools) Center Piped Sump Wall 232
640-132X V 642-1320 (concrete pools) Two Outer Piped Sump Wall 296
      
640-130X V 642-1300 (vinyl liner pools) Center Piped Sump Floor 288
640-130X V 642-1300 (vinyl liner pools) Two Outer Piped Sump Floor 352
640-130X V 642-1300 (vinyl liner pools) Center Piped Sump Wall 232
640-130X V 642-1300 (vinyl liner pools) Two Outer Piped Sump Wall 296

[1] Certified to ASME A112.19.8a-2008
[3] X denotes color. Color codes are:
    0     - White
    1     - Black
    7     - Gray
    9B    - Beige
    9 DKG - Dark Gray
    NSF Listed units are white, black, gray, beige and dark gray.


NOTE: ANSI/APSP 16-2011 has replaced ANSI/ASME A112.19.8-2007, and addenda A112.19.8a-2008 and
      A112.19.8b-2009 which have been withdrawn.


 
Wellness Marketing Corporation, DBA Endless Pools 
1601 Dutton Mill Road
Aston, PA 19014 
United States 
800-732-8660 
610-497-8676
Visit this company's website

Facility : Aston, PA
Suction Fitting Model Sump Model or Field Type Orientation (Wall and/or Floor) Design Flow Rate (GPM)

Endless Pools Stainless Steel Cover[1]
      
#18-59 18" x 59"[2] [3] [4] [5] Dual Propulsion/Elite Endless Pools/Spa System
Part #139931
Wall N/A
      
#29-19 29" x 19"[2] [6] [7] Endless Pools, Inc. Fastlane® System Wall N/A
      
125020 18" X 54"[8] [9] Venturi Endless Pool With and Without Treadmill Wall [10]
      
145180 19" x 21 3/4"[1] [8] [11] Fastlane Sport Wall [12]
      
145185 23" x 21 3/4"[1] [8] [13] Fastlane Sport XP Wall [14]
      
EP 311460 59.5" x 13"[5] [8] [15] [16] All Endless Pools/Spa System Part #138186 Wall N/A
      
EP 311530 71.5" x 13"[5] [8] [15] [16] 8' Endless Pools/Spa System Part #138187 Wall N/A
      
EP 311560 83.5" x 13"[5] [8] [15] [16] 9' Endless Pools/Spa System Part #138188 Wall N/A
      
EP 311590 95.5" x 13"[5] [8] [15] [16] 10' Endless Pools/Spa System Part #138189 Wall N/A

[1] A flow rate was not established since the Endless pools submerged suction outlet covers
    were tested as part of (Original Endless Pools/Spa System and the Performance Endless
    Pools/Spa System, Dual Propulsion/Elite Endless Pools/Spa System, and Endless Pools,
    Inc. Fastlane® System).
[1] A flow rate was not established since the Endless pools submerged suction outlet covers
    were tested as part of (Original Endless Pools/Spa System and the Performance Endless
    Pools/Spa System, Dual Propulsion/Elite Endless Pools/Spa System, and Endless Pools,
    Inc. Fastlane® System).
[2] Certified to ASME A112.19.8b-2009.
[3] This submerged suction outlet cover is Certified for use only in Endless Pools/Spa
    System Dual Propulsion/Elite Endless Pools/Spa System.
[4] Maximum allowable hydraulic power unit drive flow rate of 10.24 gpm single 7.5 HP power
    unit on the Elite model.
[5] The maximum allowable hydraulic power unit drive flow rate submerged suction outlet
    cover is 5.12 gpm when installed in an Original Endless Pools/Spa System, or Dual
    Propulsion Endless Pools/Spa Systrem.
[6] This submerged suction outlet cover is Certified for use only in Endless Pools, Inc.
    Fastlane® System.
[7] Maximum allowable hydraulic power unit drive flow rate of 4.8 gpm on the Fastlane model.
[8] Certified to ANSI/APSP 16-2011 ASME A112.19.8a-2008.
[9] This submerged suction outlet cover is certified for use in a Venturi Endless Pool With
    and Without Treadmill.
[10] Maximum flow rate of 306 gpm without treadmill and 304 gpm with treadmill.
[11] This submerged suction outlet cover is Certified for use only in the Fastlane Sport
     System.
[12] Maximum allowable flow rate of 118 GPM on the Fastlane Sport model.
[13] This submerged suction outlet cover is Certified for use only in the Fastlane Sport XP
     System.
[14] Maximum allowable flow rate of 190 GPM on the Fastlane Sport XP model.
[15] This submerged suction outlet cover is Certified for use only in an Original Endless
     Pools/Spa System and the Performance Endless Pools/Spa System.
[16] The Maximum allowable hydraulic power unit drive flow rate submerged suction outlet
     cover is 6.4 gpm when installed in a Performance Endless Pools/Spa System.


NOTE: ANSI/APSP 16-2011 has replaced ANSI/ASME A112.19.8-2007, and addenda A112.19.8a-2008 and
      A112.19.8b-2009 which have been withdrawn.


 
Whitten Products Division 
Hydrotech Systems, Ltd.
13 Green Mountain Drive 
P.O. Box 648 
Cohoes, NY 12047 
United States 
518-783-0038
Visit this company's website

Facility : Cohoes, NY
Suction Fitting Model Sump Model or Field Type Orientation (Wall and/or Floor) Design Flow Rate (GPM)

24" X 24" Suction Outlet Cover
      
ADG242430MD[1] N/A Floor 1440

[1] Certified to ANSI/APSP/ICC-16 2017 and NSF/ANSI Standard 50.



Number of matching Manufacturers is 11
Number of matching Products is 162
Processing time was 0 seconds