NSF Product and Service Listings

These NSF Official Listings are current as of Tuesday, May 7, 2024 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.

Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/PwsComponents/Listings.asp?Company=04680&Standard=061&



NSF/ANSI/CAN 61
Drinking Water System Components - Health Effects

NOTE: Unless otherwise indicated for Materials, Certification is only for the Water Contact Material shown in the Listing. Click here for a list of Abbreviations used in these Listings. Click here for the definitions of Water Contact Temperatures denoted in these Listings. Products certified to NSF/ANSI/CAN 61 comply with the health effects criteria in NSF/ANSI/CAN 600.


 
Badger Meter, Inc. 
4545 West Brown Deer Road
Milwaukee, WI 53223 
United States 
414-371-5744
Visit this company's website


Facility : # 1 USA

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Couplings[1] [2] [G]
Epoxy Coated 57335 Spool Assembly >= 2" CLD 23 MLTPL

[1] Product also complies with NSF/ANSI 372.
[2] Certified for all lengths with a diameter of 2" and greater.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Strainer [G]
Badger® Steel Plate Strainers[1] 8" - 12" CLD 23 MLTPL

[1] Product also complies with NSF/ANSI 372.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    



Facility : Milwaukee, WI

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Miscellaneous Process Devices/Components
Plate Strainer LL-NS[1] [G] 2" - 6" CLD 23 MLTPL

[1] Product also complies with NSF/ANSI 372.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Water Meters[1] [G]
Combo-01 8" CLD 23 MLTPL
Compound Series LL-NS 2" - 6" CLD 23 MLTPL
Dynasonics® U500W Ultrasonic Meter[2] 1 1/2" - 2" CLD 23 MLTPL
Dynasonics® U500W Ultrasonic Meter[3] 3" - 8" CLD 23 MLTPL
E-Series G2® Ultrasonic Meter[3] 3" - 8" CLD 23 MLTPL
E-Series® Ultrasonic Meter[2] 1 1/2" - 2" CLD 23 MLTPL
E-Series® Ultrasonic Plus[4] 5/8" - 3/4" CLD 23 MLTPL
E-Series® Ultrasonic Plus (valve ready)[4] [5] 5/8" - 3/4" CLD 23 MLTPL
FSAA-01[6] 4" - 10" x 12" CLD 23 MLTPL
FSMA-01 3" - 10" CLD 23 MLTPL
M120 LL 1 1/2" x 12 5/8" CLD 23 MLTPL
M120 LL 1 1/2" x 13" CLD 23 MLTPL
M170 LL 2" x 17" CLD 23 MLTPL
M170 LL 2" x 15 1/4" CLD 23 MLTPL
M25 PN [8] CLD 23 MLTPL
M55 LL [7] CLD 23 MLTPL
M70 LL [7] CLD 23 MLTPL
RS-900w Ultrasonic Meter [9] CLD 23 MLTPL
Turbo Series 6", 12" CLD 23 MLTPL
Turbo Series LL-NS 2" - 10" CLD 23 MLTPL
Turbo Series LL-NS (with Integral Strainer) 1 1/2" - 4" CLD 23 MLTPL

[1] Product also complies with NSF/ANSI 372.
[2] E-Series® & Dynasonics® U500W
    1 1/2" x 12 5/8"
    1 1/2" x 13"
    2" x 15 1/4"
    2" x 17"
    
    E-Series® only
    1 1/2" x 300mm (DN40)
    1 1/2" x 330mm (DN40)
    2" (DN50)
[3] E-Series® G2 Ultrasonic Meter & Dynasonics® U500W Ultrasonic Meters
    3" x 17"
    3" x 12"
    4" x 20"
    4" x 14"
    6" x 18"
    6" x 24"
    8" x 20"
[4] 5/8" x 3/4" x 7 1/2"
    3/4" x 7 1/2"
    3/4" x 9"
[5] Certification of the E-Series® Ultrasonic Plus (valve ready) covers the unmodified water
    meter only. Certification does not include meters that have been retrofitted
[6] FSAA-01 Water Meters are Certified for the following sizes and configurations: 
    FSAA-01 w/ 2" LL turbo meter bypass (4-10, 10 x 12 in.)  
    FSAA-01 w/ 1" M70 LL disc meter bypass (4-6 in.) 
    FSAA-01 w/ 1.5" M170 LL disc meter bypass (6 in.) 
    FSAA-01 w/ 2" M170 LL disc meter bypass (6-10, x 10 x 12 in.)
[7] M55 LL is Certified for the following size: 1" x 10 3/4"
    M70 LL is Certified for the following size: 1" x 10 3/4"
[8] M25 PN is Certified in the following sizes:
    5/8" x 7 1/2"
    5/8" x 3/4" x 7 1/2"
    3/4" x 9”
[9] Meters are Certified for the following sizes:
    1" x 10.57"
    1.5" x 10.57"
    2" x 10.57"
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    



Facility : Racine, WI

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Switches/Sensors [G]
HPR-32A-2-MMM-P-T [8] CLD 23 MLTPL
HPR-32A-2-MMM-PPPP-TTT [9] CLD 23 MLTPL
HPR-32iA-2-MMM-P-T [8] CLD 23 MLTPL
HPR-32iA2-MMM-PPPP-TTT [9] CLD 23 MLTPL
Impeller Data Industrial SDI Series Insert Style Flow Sensors[1] 1 1/2" - 60" C. HOT MLTPL

[1] Nomenclature:
    SDI A B C D E-F G H I
    A - 0 - Stainless steel/PPS tip, 2 - stainless steel/PEEK tip
    B - Type
        D1 - Direct Insert for Pipe 1 1/2" - 10"
        D2 - Direct Insert for Pipe 12" - 36"
        D3 - Direct Insert 36" and UP*
        H1 - Hot Tap for Pipe 1½" - 10"
        H2 - Hot Tap for Pipe 12" - 36"
        H3 - Hot Tap for Pipe 36" and UP
    C - Electronic housing
    D - Output
    E - Display
    F - O-ring (0: Viton, 1: EPDM)
    G - Shaft (2: Tungsten Carbide)
    H - Impeller (0: Stainless steel)
    I - Bearing (0: Torlon)
[8] HPR-32A-2-MMM-P-T & HPR-32iA-2-MMM-P-T: All models are 5" x 3.5" except for the 2-1/2"
    NPT Male Configuration	which is 5" x 4.5"						
    						
    MMM - Modem Type						
    MV     - Cat M1 Verizon						
    MW    - Cat M1 Global						
    NW     - NB-IOT Global						
    H        - HSPA Global						
    L1F    - FirstNet Cat 1						
    L1S    - Sprint LTE Cat 1						
    L1A    - ATT Cat 1						
    						
    P - Pressure Range						
    1 - 100 psi						
    2 - 200 psi						
    3 - 300 psi						
    5 - 500 psi						
    						
    T - Thread Type						
    B - 2-1/2" Female - Akron						
    D - 2-1/2" Female - British Columbia						
    E - 2-1/2" Female - Barberton						
    C - 2-1/2" Female - Canadian Standard						
    G - 2-1/2" Female - Cleveland, OH						
    H - 2-1/2" Female - Cedar Rapids						
    I - 2-1/2" Female - Erie, PA						
    N - 2-1/2" Female - National Hydrant						
    J - 2-1/2" Female - New York City						
    L - 2-1/2" Female - North Shores, MI						
    M - 2-1/2" Female - Phoenix, AZ						
    O - 2-1/2" Female - Pittsburg, PA						
    P - 2-1/2" Female - Sioux City						
    W - 2-1/2" NPT Male						
    Q - 2-1/2" Female - Western Canada
[9] HPR-32A-2-MMM-PPPP-TTT & HPR-32iA-2-MMM-PPPP-TTT: All models are 5" x 3.5" except for
    the WBT, which is 	5" x 4.5".						
    						
    MMM - Modem Type						
    L1V  - Verizon LTE						
    L1S   - Sprint LTE						
    LMV - Verizon Cat M1 Europe						
    LME - Cat M1 Europe						
    LNE - Cat NB-IOT Europe						
    LN1 - Cat NB-IOT NA						
    H     -  HSPA						
    						
    PPPP - Pressure Range						
    Variable 0 - 1000 psi						
    						
    TTT - Thread Type						
    NHT, CSA, PHX, BRC, NYC, SIO, AJQ, PIT, ERI, CLV, NRS, BRB, CDR, NPT, WBT, WCT, or BCT
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Water Meters [G]
Dynasonics® U500W Ultrasonic Meter [2] CLD 23 MLTPL
Dynasonics® U500W Ultrasonic Meter [7] D. HOT MLTPL
E-Series G2 Ultrasonic Meter [2] CLD 23 MLTPL
E-Series G2 Ultrasonic Meter [7] D. HOT MLTPL
M-Series® M1000 Flanged 1/2" - 8" D. HOT MLTPL
M-Series® M5000 Flanged 1/2" - 24" D. HOT MLTPL
M-Series® Mag Meter M1000 Flanged 1/2" - 8" D. HOT MLTPL
M-Series® Mag Meter M5000 Flanged 1/2" - 24" D. HOT MLTPL
M-Series® Mag Meter Model M2000 Flanged 1/2" - 54" D. HOT MLTPL
M-Series® Mag Meter Model M3000 1/2" - 24" D. HOT MLTPL
M-Series® Mag Meter Model M4000 1/2" - 12" D. HOT MLTPL
M-Series® Mag Meter Model M7600 1/2" - 4" D. HOT MLTPL
M-Series® Model M2000 Flanged 1/2" - 54" D. HOT MLTPL
M-Series® Model M3000 1/2" - 24" D. HOT MLTPL
M-Series® Model M4000 1/2" - 12" D. HOT MLTPL
M-Series® Model M7600 1/2" - 4" D. HOT MLTPL
M25 LL [3] CLD 23 MLTPL
M35 LL [4] CLD 23 MLTPL
M55 LL [5] CLD 23 MLTPL
M70 LL [6] CLD 23 MLTPL
MagnetoFlow® Flanged 1/2" - 54" D. HOT MLTPL
MagnetoFlow® Wafer 1" - 4" D. HOT MLTPL
Magnetoflow® Mag Meter Flanged 1/2" - 54" D. HOT MLTPL
Magnetoflow® Mag Meter Wafer 1" - 4" D. HOT MLTPL

[2] E-Series G2 Ultrasonic Meter & Dynasonics® U500W: 
    5/8" x 7 1/2"  
    5/8" x 3/4" x 7 1/2" 
    3/4" x 7 1/2"
    3/4" x 9"
    1" x 10 1/4"
[3] M25 LL is Certified for the following sizes: 
    5/8" x 3/4" x 7 1/2" 
    5/8" x 7 1/2" 
[4] M35 LL is Certified for the following sizes:
    3/4" x 7 1/2"
    3/4" x 9"
[5] M55 LL is Certified for the following size:
    1" x 10 3/4"
[6] M70 LL is Certified for the following size:
    1" x 10 3/4"
[7] E- Series G2 Ultrasonic Meter & Dynasonics® U500W:
    DN15 x 110 mm
    DN15 x 114 mm
    DN15 x 165 mm
    DN20 x 190 mm
    DN25 x 260 mm
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
      documentation shipped with the product are Certified.


Facility : Nogales, Sonora, Mexico

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Water Meters[1] [G]
Dynasonics U500W Ultrasonic Plus[2] 5/8" - 3/4" D. HOT MLTPL
Dynasonics U500W Ultrasonic Plus Valve Kit[2] 5/8" - 3/4" D. HOT MLTPL
Dynasonics® U500W Ultrasonic Meter [4] CLD 23 MLTPL
Dynasonics® U500W Ultrasonic Meter [3] D. HOT MLTPL
Dynasonics® U500W Ultrasonic Meter[5] 1/2" - 1 1/4" CLD 23 MLTPL
E-Series G2 Ultrasonic Meter [3] D. HOT MLTPL
E-Series G2® Ultrasonic Meter [4] CLD 23 MLTPL
E-Series® Ultrasonic Meter[5] 1/2" - 1 1/4" CLD 23 MLTPL
E-Series® Ultrasonic Plus[2] 5/8" - 3/4" CLD 23 MLTPL
E-Series® Ultrasonic Plus (valve ready)[2] 5/8" - 3/4" CLD 23 MLTPL
E-Series® Ultrasonic Plus (valve ready) Valve Kit[2] 5/8" - 3/4" D. HOT MLTPL
E-Series® Ultrasonic Plus Valve Kit[2] 5/8" - 3/4" D. HOT MLTPL
M25 LL [6] CLD 23 MLTPL
M25 PN [7] CLD 23 MLTPL
M35 LL [8] CLD 23 MLTPL
M55 LL [9] CLD 23 MLTPL
M70 LL [10] CLD 23 MLTPL

[1] Product also complies with NSF/ANSI 372.
[2] 5/8" x 3/4" x 7-1/2"
    3/4" x 7-1/2"
    3/4" x 9"
[3] E-Series G-2 Ultrasonic Meter & Dynasonics® U500W:
    DN15 x 110 mm
    DN15 x 114 mm
    DN15 x 165 mm
    DN20 x 190 mm
    DN25 x 260 mm
[4] E-Series G2® Ultrasonic Meter & Dynasonics® U500W:
    5/8" x 7 1/2"
    5/8" x 3/4" x 7 1/2"
    3/4" x 7 1/2"
    3/4" x 9"
    1" x 10 1/4"
[5] E- Series® & Dynasonics® U500W:
    5/8" x 7 1/2" or 5/8" x 3/4" x 7 1/2"
    3/4" x 7 1/2" or 3/4" x 9"
    1" x 10 3/4"
    
    E Series® Only:
    1/2" x 4 1/3" [110mm] (DN15)
    1/2" x 6 1/2" [165mm] (DN15)
    3/4" x 7 1/2" [190.5mm] (DN20)
    1" x 10 1/4" [259.8mm] (DN25)
    1 1/4" x 10 1/4" [259.8mm] (DN32)
[6] M25 LL is Certified for the following sizes: 
    5/8" x 3/4" x 7 1/2" 
    5/8" x 7 1/2"
[7] M25 PN is Certified in the following sizes:
    5/8" x 7 1/2"	
    5/8" x 3/4" x 7 1/2"
    3/4" x 9"
[8] M35 LL is Certified for the following sizes: 
    3/4" x 7 1/2"
    3/4" x 9"
[9] M55 LL is Certified for the following size: 
    1" x 10 3/4"
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    
[10] M70 LL is Certified for the following size: 
     1" x 10 3/4"



Facility : Bern, Switzerland

Mechanical Plumbing Devices

Trade Designation      

Water Meters[G]
BV-1000-TRV-025-A[1] [2]      
BV-2000-TRV-WXY-Z[1] [2]      
VISION 1000® 5654X-163-2F66[2] [3]      
VISION 2000® 565VV-16W-XFXX-Z[2] [4]      

[1] V   – End connection
          G - G 
          N - NPT
          R - O-Ring end connection
    WXY – Flow range
          050 - 0.13 … 1.3 gpm
          075 - 0.13 … 2.0 gpm
          080 - 0.50 … 2.11 gpm
          100 - 0.26 … 2.7 gpm
          150 - 0.26 … 4.0 gpm
          250 - 0.26 … 6.6 gpm
          350 - 0.53 … 9.2 gpm 
    Z   - Electrical connection
          A – 3 pin
          B – Cable, 1 meter long
          C - Cable, custom made cable length
[2] This product does not require a Q statistic. It is made from material or materials that
    do not require lead analysis when reviewed per NSF/ANSI/CAN Standard 61, Section 3.3.
[3] X - Housing
    8 - NPT
    7 - G
[4] VV       - Housing
    00 or 10 - G
    20 or 21 - Customer supplied ring
    12 0r 02 - NPT
    W        - Electrical Connection
    X        - Number of turbine blade
    XX       - Turbine type (Flow range, K-factor)
    Z        - Cable Length

[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    


Number of matching Manufacturers is 1
Number of matching Products is 74
Processing time was 1 seconds