NSF Product and Service Listings

These NSF Official Listings are current as of Thursday, September 29, 2016 at 12:15 a.m. Eastern Time. Please contact NSF International to confirm the status of any Listing, report errors, or make suggestions.

Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/PwsComponents/Listings.asp?Company=05720&Standard=061&



NSF/ANSI 61
Drinking Water System Components - Health Effects

NOTE: Unless otherwise indicated for Materials, Certification is only for the Water Contact Material shown in the Listing. Click here for a list of Abbreviations used in these Listings. Click here for the definitions of Water Contact Temperatures denoted in these Listings.


 
Belzona Inc. 
2000 N.W. 88 Court
Miami, FL 33172 
United States 
305-594-4994
Visit this company's website


Facility : Miami Lakes, FL

Joining and Sealing Materials

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Sealants[1]
Belzona 1111 (Super Metal) [2] C. HOT SLT

[1] Mix ratio of Base: Solidifier is 5:1 by weight
[2] Certified for a maximum of 10% of 1/2" pipe or 5 gallon tank.


Protective (Barrier) Materials

    Water Water
  Water Contact Contact Contact
Trade Designation Size Restriction Temp Material

Coatings - Fittings
Belzona 5812DW[1] >= 4" CLD 23 EPOXY
Belzona 5892[2] [3] >= 4" C. HOT EPOXY

[1] Colors: Blue, grey					
    Number of Coats: 1 - 2					
    Maximum Field Use Dry Film Thickness: 24 (18 mils per coat)
    Recoat Cure Time and Temperature: 3 hours at 72°F			
    Final Cure Time and Temperature: 48 hours at 72°F			
    Special Comments: Mix ratio part A:B is 3:1 by volume or 4.7:1 by weight. The cured
    coating should be washed with clean water and the washings discarded prior to service in
    potable water.
[2] Colors: Grey, white
    Number of Coats: 2
    Sequence of Coats: Coat 1 - white, coat 2 - grey
    Maximum Field Use Dry Film Thickness: 24 mils (maximum of 12 mils per coat)
    Maximum Thinner: None
    Recoat Cure Time and Temperature: 4 - 24 hours @ 68°F
    Final Cure Time and Temperature: 18 hours at 68°F plus 2 hours at 122°F
    Special Comments: Mix ratio part A:B is 3.5: 1 by volume or 5.7:1 by weight
[3] Certification does not include Belzona 9111 cleaner/degreaser), Belzona 1111 (pit
    filler), or Belzona 9121 (cleaning solvent).

Coatings - Pipe
Belzona 5812DW[1] >= 6" CLD 23 EPOXY
Belzona 5892[2] [3] >= 6" C. HOT EPOXY

[1] Colors: Blue, grey					
    Number of Coats: 1 - 2					
    Maximum Field Use Dry Film Thickness: 24 (18 mils per coat)
    Recoat Cure Time and Temperature: 3 hours at 72°F			
    Final Cure Time and Temperature: 48 hours at 72°F			
    Special Comments: Mix ratio part A:B is 3:1 by volume or 4.7:1 by weight. The cured
    coating should be washed with clean water and the washings discarded prior to service in
    potable water.
[2] Colors: Grey, white
    Number of Coats: 2
    Sequence of Coats: Coat 1 - white, coat 2 - grey
    Maximum Field Use Dry Film Thickness: 24 mils (maximum of 12 mils per coat)
    Maximum Thinner: None
    Recoat Cure Time and Temperature: 4 - 24 hours @ 68°F
    Final Cure Time and Temperature: 18 hours at 68°F plus 2 hours at 122°F
    Special Comments: Mix ratio part A:B is 3.5: 1 by volume or 5.7:1 by weight
[3] Certification does not include Belzona 9111 cleaner/degreaser), Belzona 1111 (pit
    filler), or Belzona 9121 (cleaning solvent).

Coatings - Tank
Belzona 5812DW[1] >= 500 gal. CLD 23 EPOXY
Belzona 5892[2] [3] >= 500 gal. C. HOT EPOXY

[1] Colors: Blue, grey					
    Number of Coats: 1 - 2					
    Maximum Field Use Dry Film Thickness: 24 (18 mils per coat)
    Recoat Cure Time and Temperature: 3 hours at 72°F			
    Final Cure Time and Temperature: 48 hours at 72°F			
    Special Comments: Mix ratio part A:B is 3:1 by volume or 4.7:1 by weight. The cured
    coating should be washed with clean water and the washings discarded prior to service in
    potable water.
[2] Colors: Grey, white
    Number of Coats: 2
    Sequence of Coats: Coat 1 - white, coat 2 - grey
    Maximum Field Use Dry Film Thickness: 24 mils (maximum of 12 mils per coat)
    Maximum Thinner: None
    Recoat Cure Time and Temperature: 4 - 24 hours @ 68°F
    Final Cure Time and Temperature: 18 hours at 68°F plus 2 hours at 122°F
    Special Comments: Mix ratio part A:B is 3.5: 1 by volume or 5.7:1 by weight
[3] Certification does not include Belzona 9111 cleaner/degreaser), Belzona 1111 (pit
    filler), or Belzona 9121 (cleaning solvent).

Coatings - Valve
Belzona 5812DW[1] >= 4" CLD 23 EPOXY
Belzona 5892[2] [3] >= 4" C. HOT EPOXY

[1] Colors: Blue, grey					
    Number of Coats: 1 - 2					
    Maximum Field Use Dry Film Thickness: 24 (18 mils per coat)
    Recoat Cure Time and Temperature: 3 hours at 72°F			
    Final Cure Time and Temperature: 48 hours at 72°F			
    Special Comments: Mix ratio part A:B is 3:1 by volume or 4.7:1 by weight. The cured
    coating should be washed with clean water and the washings discarded prior to service in
    potable water.
[2] Colors: Grey, white
    Number of Coats: 2
    Sequence of Coats: Coat 1 - white, coat 2 - grey
    Maximum Field Use Dry Film Thickness: 24 mils (maximum of 12 mils per coat)
    Maximum Thinner: None
    Recoat Cure Time and Temperature: 4 - 24 hours @ 68°F
    Final Cure Time and Temperature: 18 hours at 68°F plus 2 hours at 122°F
    Special Comments: Mix ratio part A:B is 3.5: 1 by volume or 5.7:1 by weight
[3] Certification does not include Belzona 9111 cleaner/degreaser), Belzona 1111 (pit
    filler), or Belzona 9121 (cleaning solvent).



Facility : Harrogate, N. Yorks, United Kingdom

Joining and Sealing Materials

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Sealants
Belzona 1111 (Super Metal) [4] [5] C. HOT SLT

[4] Certified for a maximum of 10% of 1/2" pipe or 5 gallon tank.
[5] Mix ratio of Base:Solidifier is 5:1 by weight.


Protective (Barrier) Materials

    Water Water
  Water Contact Contact Contact
Trade Designation Size Restriction Temp Material

Coatings - Fittings
Belzona 5811DW2 (DW Immersion Grade)[1] [2] >= 4" CLD 23 EPOXY
Belzona 5892[5] [6] >= 4" C. HOT EPOXY

[1] Certified product is marked (NSF Grade).
[2] Colors: Cream, gray
    Number of Coats: 2
    Maximum Field Use Dry Film Thickness (in mils): 10 per coat (20 total)
    Recoat Cure Time and Temperature: 6-8 hours at 68°F (Max 72 hours)
    Final Cure Time and Temperature: 7 days at 68°F
    Special Comments: Mix ratio of Part A:Part B is 4:1 by weight.  The cured coating should
    be washed with clean water adn the washings discarded prior to service in potable water.
[5] Number of Coats: 2
    Sequence of Coats: Coat 1 = white, Coat 2 = gray
    Maximum Field Use Dry Film Thickness (in mils): 24 mils (maximum of 12 mils per coat)
    Maximum Thinner: None
    Recoat Cure Time and Temperature: 4 - 24 hours @ 68°F
    Final Cure Time and Temperature: 18 hours at 68°F plus 2 hours at 122°F
    Special Comments: Mix ratio part A:B is 3.5:1 by volume or 5.7:1 by weight.
[6] Certification does not include Belzona® 9111 (cleaner/degreaser), Belzona® 1111 (pit
    filler), or Belzona® 9121 (cleaning solvent).

Coatings - Pipe
Belzona 5811DW2 (DW Immersion Grade)[1] [2] >= 16" CLD 23 EPOXY
Belzona 5892[5] [6] >= 6" C. HOT EPOXY

[1] Certified product is marked (NSF Grade).
[2] Colors: Cream, gray
    Number of Coats: 2
    Maximum Field Use Dry Film Thickness (in mils): 10 per coat (20 total)
    Recoat Cure Time and Temperature: 6-8 hours at 68°F (Max 72 hours)
    Final Cure Time and Temperature: 7 days at 68°F
    Special Comments: Mix ratio of Part A:Part B is 4:1 by weight.  The cured coating should
    be washed with clean water adn the washings discarded prior to service in potable water.
[5] Number of Coats: 2
    Sequence of Coats: Coat 1 = white, Coat 2 = gray
    Maximum Field Use Dry Film Thickness (in mils): 24 mils (maximum of 12 mils per coat)
    Maximum Thinner: None
    Recoat Cure Time and Temperature: 4 - 24 hours @ 68°F
    Final Cure Time and Temperature: 18 hours at 68°F plus 2 hours at 122°F
    Special Comments: Mix ratio part A:B is 3.5:1 by volume or 5.7:1 by weight.
[6] Certification does not include Belzona® 9111 (cleaner/degreaser), Belzona® 1111 (pit
    filler), or Belzona® 9121 (cleaning solvent).

Coatings - Tank
Belzona 5811DW2 (DW Immersion Grade)[1] [2] >= 500 gal. CLD 23 EPOXY
Belzona 5892[5] [6] >= 500 gal. C. HOT EPOXY
Belzona 1341 N (Supermetalglide)[1] [3] >= 100,000 gal. CLD 23 EPOXY

[1] Certified product is marked (NSF Grade).
[2] Colors: Cream, gray
    Number of Coats: 2
    Maximum Field Use Dry Film Thickness (in mils): 10 per coat (20 total)
    Recoat Cure Time and Temperature: 6-8 hours at 68°F (Max 72 hours)
    Final Cure Time and Temperature: 7 days at 68°F
    Special Comments: Mix ratio of Part A:Part B is 4:1 by weight.  The cured coating should
    be washed with clean water adn the washings discarded prior to service in potable water.
[3] Colors: Blue, gray
    Number of Coats: 2
    Sequence of Coats: Any combination of Listed colors
    Maximum Field Use Dry Film Thickness (in mils): 20
    Maximum Thinner: None
    Recoat Cure Time and Temperature: 6 hours at 75°F
    Final Cure Time and Temperature: 6 days at 75°F
    Special Comments: Mix ratio of A:B is 100:48 by weight.
[5] Number of Coats: 2
    Sequence of Coats: Coat 1 = white, Coat 2 = gray
    Maximum Field Use Dry Film Thickness (in mils): 24 mils (maximum of 12 mils per coat)
    Maximum Thinner: None
    Recoat Cure Time and Temperature: 4 - 24 hours @ 68°F
    Final Cure Time and Temperature: 18 hours at 68°F plus 2 hours at 122°F
    Special Comments: Mix ratio part A:B is 3.5:1 by volume or 5.7:1 by weight.
[6] Certification does not include Belzona® 9111 (cleaner/degreaser), Belzona® 1111 (pit
    filler), or Belzona® 9121 (cleaning solvent).

Coatings - Valve
Belzona 5811DW2 (DW Immersion Grade)[1] [2] >= 4" CLD 23 EPOXY
Belzona 5892[5] [6] >= 4" C. HOT EPOXY
Belzona 1341 N (Supermetalglide)[1] [3] [4] >= 4" CLD 23 EPOXY

[1] Certified product is marked (NSF Grade).
[2] Colors: Cream, gray
    Number of Coats: 2
    Maximum Field Use Dry Film Thickness (in mils): 10 per coat (20 total)
    Recoat Cure Time and Temperature: 6-8 hours at 68°F (Max 72 hours)
    Final Cure Time and Temperature: 7 days at 68°F
    Special Comments: Mix ratio of Part A:Part B is 4:1 by weight.  The cured coating should
    be washed with clean water adn the washings discarded prior to service in potable water.
[3] Colors: Blue, gray
    Number of Coats: 2
    Sequence of Coats: Any combination of Listed colors
    Maximum Field Use Dry Film Thickness (in mils): 20
    Maximum Thinner: None
    Recoat Cure Time and Temperature: 6 hours at 75°F
    Final Cure Time and Temperature: 6 days at 75°F
    Special Comments: Mix ratio of A:B is 100:48 by weight.
[4] This product is also accepted for use on distribution line pumps with a
    minimum daily output of 4800 gallons per square foot of coated pump
    surface area.
[5] Number of Coats: 2
    Sequence of Coats: Coat 1 = white, Coat 2 = gray
    Maximum Field Use Dry Film Thickness (in mils): 24 mils (maximum of 12 mils per coat)
    Maximum Thinner: None
    Recoat Cure Time and Temperature: 4 - 24 hours @ 68°F
    Final Cure Time and Temperature: 18 hours at 68°F plus 2 hours at 122°F
    Special Comments: Mix ratio part A:B is 3.5:1 by volume or 5.7:1 by weight.
[6] Certification does not include Belzona® 9111 (cleaner/degreaser), Belzona® 1111 (pit
    filler), or Belzona® 9121 (cleaning solvent).


Number of matching Manufacturers is 1
Number of matching Products is 20
Processing time was 0 seconds