NSF Product and Service Listings

These NSF Official Listings are current as of Monday, September 16, 2024 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.

Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/PwsComponents/Listings.asp?Company=29830&Standard=061&


NSF/ANSI/CAN 61
Drinking Water System Components - Health Effects

NOTE: Unless otherwise indicated for Materials, Certification is only for the Water Contact Material shown in the Listing. Click here for a list of Abbreviations used in these Listings. Click here for the definitions of Water Contact Temperatures denoted in these Listings. Products certified to NSF/ANSI/CAN 61 comply with the health effects criteria in NSF/ANSI/CAN 600.

 
Master Builders Solutions Admixtures US, LLC 
23700 Chagrin Boulevard
Cleveland, OH 44122 
United States 
800-628-9990 
216-839-7500
Visit this company's website


Facility : # 1 USA

Joining and Sealing Materials

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Grouts[1] [2]
MasterRoc MP 355 1K [3] CLD 23 PUR
MasterRoc MP 355 1K Accelerator [3] CLD 23 PUR 

[1] Minimum cure time is 0.25 hours at 40°F.  Mix ratio of Resin:Accelerator is 90:10 by
    volume.
[2] MasterRoc MP 355 1K Accelerator is only certified for use with MasterRoc MP 355 1K.
[3] Certified for use in tanks at maximum surface area to volume ratio of 0.26 square
    centimeters per liter.



Facility : # 2 USA

Joining and Sealing Materials

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Grout[1]
Master Roc MP 351 LV [3] CLD 23 PUR
Master Roc MP 351 LV Accelerator[2] [3] CLD 23 PUR 

[1] Minimum cure time is 0.25 hours at 40°F. Mix ratio of Resin:Accelerator is 90:10 by
    volume.
[2] MasterRoc MP 351 LV Accelerator is only certified for use with MasterRoc MP 351 LV.
[3] Certified for use in tanks at maximum surface area to volume ratio of 0.26 square
    centimeters per liter.



Facility : Cucamonga, CA

Protective (Barrier) Materials

    Water Water
  Water Contact Contact Contact
Trade Designation Size Restriction Temp Material

Concrete Admixtures[1]
MasterLife CRA 007 [2] CLD 23 CMNT
MasterLife® SRA 035 [3] CLD 23 CMNT
MasterPozzolith 322 [4] CLD 23 CMNT
MasterPozzolith 700 [5] CLD 23 CMNT
MasterSure Z 60 [6] CLD 23 CMNT
Pozzolith 322N [4] CLD 23 CMNT
Pozzolith® 700N [5] CLD 23 CMNT
RheoTEC Z-60 [6] CLD 23 CMNT 

[1] All Listed products from this facility are NSF Certified, whether or not they bear the
    NSF Mark.
[2] Certified for a maximum use level not to exceed 2 gallons per cubic yard of concrete.
    Certified for use in tanks 70,000 gallons and greater.
[3] Certified for a maximum use level of 1.5 gallons per cubic yard of concrete.  Certified
    for use in tanks 200,000 gallons and greater and pipes 120 inches and greater.
[4] Certified for a maximum use level of 7 fluid ounces per 100 pounds of cement. Certified
    for use in tanks 1500 gallons and greater and pipes and fittings 36" and greater.
[5] Certified for a maximum use level of 5 fluid ounces per 100 pounds of cement.  Certified
    for use in tanks 200 gallons and greater and pipes and fittings 8 inches and greater.
[6] Certified for use in tanks 200 gallons and greater and pipes and fittings 6" and
    greater.
    Certified for a maximum use level of 12 fluid ounces per 100 pounds of cement.



Facility : Newark, CA

Protective (Barrier) Materials

    Water Water
  Water Contact Contact Contact
Trade Designation Size Restriction Temp Material

Concrete Admixtures[1]
MasterLife 300C[2] [3] CLD 23 CMNT
MasterLife 300C Red[2] [3] CLD 23 CMNT
MasterLife 300D [4] [3] CLD 23 CMNT
MasterLife 300D Red[4] [3] CLD 23 CMNT
MasterLife 300L[5] [3] CLD 23 CMNT
PS-1730[5] [3] CLD 23 CMNT
PS-1799[5] [3] CLD 23 CMNT 

[1] All Listed products from this facility are NSF Certified, whether or not they bear the
    NSF Mark.
[2] Certified for a level not to exceed 1% of cement content by mass.
[3] Certified for use in tanks 200 gallons and greater and pipes and fittings 6" and greater.
[4] Certified for a level not to exceed 2.5% of cement content by mass.
[5] Certified for a maximum use level of 1.25 gallons per cubic yard of concrete.



Facility : Allentown, PA

Protective (Barrier) Materials

    Water Water
  Water Contact Contact Contact
Trade Designation Size Restriction Temp Material

Concrete Admixtures[1]
Glenium 3030 NS [2] CLD 23 CMNT
Glenium 3400 NV [3] CLD 23 CMNT
MB AE 90 [4] CLD 23 CMNT
MB VR Standard [4] CLD 23 CMNT
MasterAir AE 90 [4] CLD 23 CMNT
MasterAir VR 10 [4] CLD 23 CMNT
MasterGlenium 3030 [2] CLD 23 CMNT
MasterGlenium 3400 [3] CLD 23 CMNT
Master Glenium 7620 [5] CLD 23 CMNT
MasterGlenium 7920 [5] CLD 23 CMNT
MasterGlenium 7925 [5] CLD 23 CMNT
MasterPolyHeed 997 [6] CLD 23 CMNT
MasterPozzolith 200 [7] CLD 23 CMNT
MasterRheobuild 1000 [8] CLD 23 CMNT
MasterSet AC 534 [9] CLD 23 CMNT
MasterSet R 100 [7] CLD 23 CMNT
PolyHeed 997 [6] CLD 23 CMNT
Pozzolith 100XR [7] CLD 23 CMNT
Pozzolith 200N [7] CLD 23 CMNT
Pozzolith NC 534 [9] CLD 23 CMNT
Rheobuild 1000 [8] CLD 23 CMNT 

[1] All Listed products from this facility are NSF Certified, whether or not they bear the
    NSF Mark.
[2] Maximum use level not to exceed 18 fl. oz. per 100 lbs. of cement.  Certified for use in
    pipes 4" and greater, and in tanks 200 gallons and greater.
[3] Maximum use level not to exceed 12 fl. oz. per 100 lbs. of cement.  Certified for use in
    pipes 6" and greater, and in tanks 100 gallons and greater.
[4] Certified for a level not to exceed 1.5 fluid oz. per 100 pounds of cement.  Certified
    for use in pipes 8" and greater, tanks 200 gallons and greater.
[5] Certified for a level not to exceed 15 fluid oz. per 100 pounds of cement.  Certified
    for use in tanks 200 gallons and greater and pipes 6" in diameter and greater.
    
    
[6] Maximum use level not to exceed 15 fl. oz. per 100 lbs. of cement.  Certified for use in
    pipes 20" and greater, and in tanks 400 gallons and greater.
[7] Maximum use level not to exceed 5 fl. oz. per 100 lbs. of cement.  Certified for use in
    pipes 20" and greater.
[8] Maximum use level not to exceed 20 fl. oz. per 100 lbs. of cement.  Certified for use in
    pipes 6" and greater.
[9] Maximum use level not to exceed 30 fl. oz. per 100 lbs. of cement.  Certified for use in
    pipes 10" and greater, tanks 200 gallons and greater, and fittings 6" in diameter and
    greater.



Facility : Lancaster, TX

Protective (Barrier) Materials

    Water Water
  Water Contact Contact Contact
Trade Designation Size Restriction Temp Material

Concrete Admixtures[1]
Delvo Stabilizer [2] CLD 23 CMNT
Glenium 7500 [3] CLD 23 CMNT
Glenium 7700 [4] CLD 23 CMNT
Master Glenium 7620 [5] [6] CLD 23 CMNT
MasterGlenium 1466 [7] CLD 23 CMNT
MasterGlenium 7500 [3] CLD 23 CMNT
MasterGlenium 7700 [4] CLD 23 CMNT
MasterGlenium 7920 [5] [6] CLD 23 CMNT
MasterGlenium 7925 [5] [6] CLD 23 CMNT
MasterPolyheed 1020 [8] [9] CLD 23 CMNT
MasterSet DELVO [2] CLD 23 CMNT 

[1] All Listed products from this facility are NSF Certified, whether or not they bear the
    NSF Mark.
[2] Certified for a level not to exceed 5 fluid oz. per 100 pounds of cement.  Certified for
    use in pipes 4'' and greater, tanks 200 gallons and greater.
[3] Certified for a level not to exceed 15 fluid oz. per 100 pounds of cement.  Certified
    for use in pipes 18" in diameter and greater, tanks 200 gallons and greater.
[4] Certified for a level not to exceed 15 fluid oz. per 100 pounds of cement.  Certified
    for use in pipes 6" and greater, tanks 200 gallons and greater.
[5] Certified for use in tanks 200 gallons and greater and pipes and fittings 6" diameter
    and greater.
[6] Certified for a level not to exceed 15 fluid oz. per 100 pounds of cement. 
[7] Certified for a maximum use level of 10 fluid oz. per 100 pounds of cement.  Certified
    for use in tanks 200 gallons and greater and pipes and fittings 6" diameter and greater.
[8] Certified for a maximum use level of 12 fl. oz. per 100 lbs. cement.
[9] Certified for use in tanks 500,000 gallons and greater and fittings 6" diameter and
    greater.



Facility : Nisku, Alberta, Canada

Protective (Barrier) Materials

    Water Water
  Water Contact Contact Contact
Trade Designation Size Restriction Temp Material

Concrete Admixtures[1]
MasterAir AE 200[2] [3] CLD 23 CMNT
MasterPolyheed 980[4] [5] CLD 23 CMNT
MasterPozzolith 210[6] [7] CLD 23 CMNT
MasterSet R 122[6] [7] CLD 23 CMNT
MasterSet R 961[6] [7] CLD 23 CMNT
Micro Air®[2] [3] CLD 23 CMNT
Pozzolith 122R[6] [7] CLD 23 CMNT
Pozzolith 961R[6] [7] CLD 23 CMNT 

[1] All Listed products from this facility are NSF Certified, whether or not they bear the
    NSF Mark.
[2] Certified for a maximum use level of 1.5 fl. oz. per 100 pounds of cement.
[3] Certified for use in tanks 200 gallons and greater and pipes and fittings 8" and greater.
[4] Certified for a use level of 12.0 fluid ounces per 100 pounds of cement.
[5] Certified for use in tanks 1500 gallons and greater, pipe 36" and greater, and fittings
    20" and greater.
[6] Certified for a maximum use level of 5 fl. oz. per 100 pounds of cement.
[7] Certified for use in pipes 16" diameter and greater, tanks 200 gallons and greater.

Number of matching Manufacturers is 1
Number of matching Products is 59
Processing time was 1 seconds