NSF Product and Service Listings
These NSF Official Listings are current as of Thursday, December 12, 2024 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.
Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/Wastewater/Listings.asp?Standard=040&
NSF/ANSI 40
Residential Wastewater Treatment Systems
Residential Wastewater Treatment Systems
Adelante Consulting, Inc. | |
359 Dina Nelson Road | |
Corrales, NM 87048 | |
United States | |
505-920-4150 | |
Visit this company's website |
Facility : Ronkonkoma, NY
Model Number | Rated Capacity Gallons/Day |
Classification |
Pugo System | 750 | Class I |
Aero-Stream, LLC | |
W300N7706 Christine Lane | |
Hartland, WI 53029 | |
United States | |
877-254-7093 | |
262-538-4000 | |
Visit this company's website |
Facility : Hartland, WI
Model Number | Rated Capacity Gallons/Day |
Classification | ||
Eco-Nest AS450-1[1] [2] [3] | 450 | Class II | ||
Eco-Nest AS450-2[1] [2] [3] | 450 | Class I | ||
Eco-Nest AS450-3[1] [2] [3] | 450 | Class I | ||
Eco-Nest AS500-1[1] [2] [3] | 500 | Class II | ||
Eco-Nest AS500-2[1] [2] [3] | 500 | Class I | ||
Eco-Nest AS500-3[1] [2] [3] | 500 | Class I | ||
Eco-Nest AS600-1[1] [2] [3] | 600 | Class II | ||
Eco-Nest AS600-2[1] [2] [3] | 600 | Class I | ||
Eco-Nest AS600-3[1] [2] [3] | 600 | Class I | ||
Eco-Nest AS750-1[1] [2] [3] | 750 | Class II | ||
Eco-Nest AS750-2[1] [2] [3] | 750 | Class I | ||
Eco-Nest AS750-3[1] [2] [3] | 750 | Class I | ||
Eco-Nest AS1000-1[1] [2] [3] | 1000 | Class II | ||
Eco-Nest AS1000-2[1] [2] [3] | 1000 | Class I | ||
Eco-Nest AS1000-3[1] [2] [3] | 1000 | Class I | ||
Eco-Nest AS1500-1[1] [2] [3] | 1500 | Class II | ||
Eco-Nest AS1500-2[1] [2] [3] | 1500 | Class I | ||
Eco-Nest AS1500-3[1] [2] [3] | 1500 | Class I | ||
[1] The wastewater treatment system series ranging from 450 - 1500 GPD are authorized to be used with specific Roth and Norwesco alternate tanks. Reference the manufacturer's use instructions for the specific tank specifications. [2] The wastewater treatment system series ranging from 450 - 1500 GPD are authorized to be used with specific Infiltrator & Chemtainer alternate tanks. Reference the manufacturer's use instructions for the specific tank specifications. [3] The wastewater treatment system series ranging from 450 - 1500 GPD are authorized to be used with specific Ace Roto/Den Hartog Industries and Snyder Industries alternate tanks. Reference the manufacturer's use instructions for the specific tank specifications. |
Anua | |
4106 Bernau Avenue | |
Greensboro, NC 27407 | |
United States | |
800-787-2356 | |
336-547-9338 | |
Visit this company's website |
Facility : Greensboro, NC
Model Number | Rated Capacity Gallons/Day |
Classification | ||
Quanics AeroCell Series |
||||
Q-ATS-A400-2-80/20-AC[1] | 800 | Class I | ||
Q-ATS-A400-3-80/20-AC[1] | 1200 | Class I | ||
Q-ATS-A400-80/20-AC[1] | 400 | Class I | ||
Q-ATS-540-AC-N | 500 | Class I | ||
Q-ATS-1060-AC-N | 800 | Class I | ||
Q-ATS-1530-AC-N | 1500 | Class I | ||
ATS-NS500-AC-N | 500 | Class I | ||
ATS-NS750-AC-N | 660 | Class I | ||
ATS-NS1000-AC-N | 800 | Class I | ||
ATS-NS500-80/20-AC-N[1] | 500 | Class I | ||
ATS-NS500-2-80/20-AC-N[1] | 1000 | Class I | ||
ATS-NS500-3-80/20-AC-N[1] | 1500 | Class I | ||
ATS-NS750-80/20-AC-N [1] | 660 | Class I | ||
ATS-NS750-2-80/20-AC-N[1] | 1320 | Class I | ||
[1] Treatment tank(s) contain an 80/20 divider. |
||||
Quanics BioCoir Series |
||||
Q-ATS-A400-2-80/20-AC[1] | 800 | Class I | ||
Q-ATS-A400-3-80/20-AC[1] | 1200 | Class I | ||
Q-ATS-A400-80/20-AC[1] | 400 | Class I | ||
Q-ATS-540-AC-N | 500 | Class I | ||
Q-ATS-1060-AC-N | 800 | Class I | ||
Q-ATS-1530-AC-N | 1500 | Class I | ||
ATS-NS500-AC-N | 500 | Class I | ||
ATS-NS750-AC-N | 660 | Class I | ||
ATS-NS1000-AC-N | 800 | Class I | ||
ATS-NS500-80/20-AC-N[1] | 500 | Class I | ||
ATS-NS500-2-80/20-AC-N[1] | 1000 | Class I | ||
ATS-NS500-3-80/20-AC-N[1] | 1500 | Class I | ||
ATS-NS750-80/20-AC-N[1] | 660 | Class I | ||
ATS-NS750-2-80/20-AC-N[1] | 1320 | Class I | ||
[1] Treatment tank(s) contain an 80/20 divider. |
||||
Puraflo Series |
||||
P150N*3A | 450 | Class I | ||
P150N*3B[2] [3] | 450 | Class I | ||
P150N*4A | 600 | Class I | ||
P150N*4B | 600 | Class I | ||
P150N*5A | 750 | Class I | ||
P150N*5B | 750 | Class I | ||
P150N*6A | 900 | Class I | ||
P150N*6B | 900 | Class I | ||
P150N*7A | 1050 | Class I | ||
P150N*7B | 1050 | Class I | ||
P150N*8A | 1200 | Class I | ||
P150N*8B | 1200 | Class I | ||
P150N*9A | 1350 | Class I | ||
P150N*9B | 1350 | Class I | ||
P150N*10A | 1500 | Class I | ||
P150N*10B | 1500 | Class I | ||
P300NP*2A | 600 | Class I | ||
P300NP*2B | 600 | Class I | ||
P450NP*1A | 450 | Class I | ||
P450NP*1B | 450 | Class I | ||
P750NP*1A | 750 | Class I | ||
P750NP*1B | 750 | Class I | ||
[2] Suffix 1 denotes a 1000 gallon pretreatment tank. [3] Suffix 2 denotes a 1000 gallon pump tank. |
||||
Puraflo Coir Series[4] |
||||
Puraflo® Coir P200C*7[10] | 1400 | Class I | ||
Puraflo® Coir P200C*5[8] | 1000 | Class I | ||
Puraflo® Coir P200C*4[7] | 800 | Class I | ||
Puraflo® Coir P200C*3[6] | 600 | Class I | ||
Puraflo® Coir P200C*6[9] | 1200 | Class I | ||
Puraflo® Coir P200C*2 [5] | 400 | Class I | ||
[4] Puraflo Coir system consists of pods rated to treat 200 gal/day of wastewater and require pretreatment in septic tanks using locally sourced tanks. Tank volumes shall meet the specified volume, and up to 50% excess volume, to meet certification requirements. [5] Requires installation with a 1,000 gallon septic tank and 500 gallon dosing tank. [6] Requires installation with a 1,500 gallon septic tank and 750 gallon dosing tank. [7] Requires installation with a 2,000 gallon septic tank and 1,000 gallon dosing tank. [8] Requires installation with a 2,500 gallon septic tank and 1,250 gallon dosing tank. [9] Requires installation with a 3,000 gallon septic tank and 1,500 gallon dosing tank. [10] Requires installation with a 3,500 gallon septic tank and 1,750 gallon dosing tank. |
||||
PuraSys Model Series |
||||
PS1-4 | 400 | Class I | ||
PS1-5 | 500 | Class I | ||
PS1-6 | 600 | Class I | ||
PS1-7 | 700 | Class I | ||
PS1-8 | 800 | Class I | ||
PS1-9 | 900 | Class I | ||
PS1-10 | 1000 | Class I | ||
PS1-11 | 1100 | Class I | ||
PS1-12 | 1200 | Class I | ||
PS1-13 | 1300 | Class I | ||
PS1-14 | 1400 | Class I |
AquaKlear, Inc. | |
876 North Bierdeman Road | |
Pearl, MS 39208 | |
United States | |
877-936-7711 | |
601-936-7711 |
Facility : Pearl, MS
Model Number | Rated Capacity Gallons/Day |
Classification | ||
AK500C[1] [4] [5] [6] [7] | 500 | Class I | ||
AK500F[2] [8] [9] | 500 | Class I | ||
AK500FF[3] [12] | 500 | Class I | ||
AK600C[1] | 600 | Class I | ||
AK6PT | 600 | Class I | ||
AK600F[2] [10] [11] | 600 | Class I | ||
AK600FF[3] | 600 | Class I | ||
AK750C[1] | 750 | Class I | ||
AK750F[2] | 750 | Class I | ||
AK750FF[3] | 750 | Class I | ||
AK800C[1] | 800 | Class I | ||
AK800F[2] | 800 | Class I | ||
AK800FF[3] | 800 | Class I | ||
AK1000C[1] | 1000 | Class I | ||
AK1000F[2] | 1000 | Class I | ||
AK1000FF[3] | 1000 | Class I | ||
AK1500C[1] | 1500 | Class I | ||
AK1500CA[1] [13] | 1500 | Class I | ||
AK1500F[2] | 1500 | Class I | ||
AK1500FF[3] | 1500 | Class I | ||
[1] Suffix C denotes concrete tank. [2] Suffix F denotes fiberglass tank. [3] Suffix FF denotes fiberglass tank with flat top. [4] Model AK500C also a component of the model AK5B1 treatment system. This complete model has not been tested by NSF. Complete model AK5B1 includes a 300 gallon pretreatment tank and a 500 gallon pump tank. [5] Model AK500C also a component of the model AK5B2 treatment system. This complete model has not been tested by NSF. Complete model AK5B2 includes a 400 gallon pretreatment tank and a 555 gallon pump tank. [6] Model AK500C also a component of the model AK5B3 treatment system. This complete model has not been tested by NSF. Complete model AK5B3 includes a 425 gallon pretreatment tank and a 750 gallon pump tank. [7] Model AK500C also a component of the model AK500C3P treatment system. This complete model has not been tested by NSF. Complete model AK500C3P includes a 300 gallon pretreatment tank. [8] Model AK500F also a component of the model AK365F treatment system. This complete model has not been tested by NSF. Complete model AK365F includes a 300 gallon pretreatment tank and a 500 gallon pump tank. [9] Model AK500F also a component of model AK500FC. This complete model has not been tested by NSF. Complete model AK500FC includes a 100 gallon chlorine tank. [10] Model AK600F also a component of model AK500F3P. This complete model has not been tested by NSF. Complete model AK600F3P includes a 300 gallon pretreatment tank and a 100 gallon chlorine tank. [11] Model AK600F also a component of model AK600FP5. This complete model has not been tested by NSF. Complete model AK600FP5 includes a 500 gallon pump tank. [12] Model AK500FF also a component of model AKF5B1. This complete model has not been tested by NSF. Complete model AKF5B1 includes a 500 gallon pretreatment tank and a 750 gallon pump tank. [13] Suffix A denots a low profile tank. |
NOTE: This company may sell products complying with all applicable requirements for Certification nationally and internationally, but has advised NSF of authorized representatives physically located in the following: Arkansas Florida Georgia Illinois Louisiana Mississippi Texas Contact the Listed company directly for further product information and availability in your area.
ATB WATER GmbH | |
Südstraße 2 | |
32457 Porta Westfalica | |
Germany | |
49 573 130 2300 | |
Visit this company's website |
Facility : Porta Westfalica, Germany
Model Number | Rated Capacity Gallons/Day |
Classification |
ECOMAX 400 | 400 | Class I |
ECOMAX 540 | 540 | Class I |
ECOMAX 600 | 600 | Class I |
ECOMAX 680 | 680 | Class I |
ECOMAX 810 | 810 | Class I |
ECOMAX 1050 | 1,050 | Class I |
ECOMAX 1280 | 1,280 | Class I |
Bergmann Beton + Abwassertechnik GmbH | |
Am Zeisig 8 | |
D-09322 Penig | |
Germany | |
49 3738 186115 |
Facility : Kitchener, Ontario, Canada
Model Number | Rated Capacity Gallons/Day |
Classification |
WSB 400 | 400 | Class I |
WSB 500 | 530 | Class I |
WSB 600 | 660 | Class I |
WSB 750 | 790 | Class I |
WSB 1000 | 1000 | Class I |
WSB 1250 | 1320 | Class I |
WSB 1500 | 1500 | Class I |
Bio-Microbics, Inc. | |
16002 West 110th Street | |
Lenexa, KS 66219 | |
United States | |
800-753-FAST | |
913-422-0707 | |
Visit this company's website |
Facility : Lenexa, KS
Model Number | Rated Capacity Gallons/Day |
Classification | ||
BioBarrier® MBR 0.5 | 500 | Class I | ||
BioBarrier® MBR 0.5-N | 500 | Class I | ||
BioBarrier® MBR 1.0 | 1000 | Class I | ||
BioBarrier® MBR 1.0-N | 1000 | Class I | ||
BioBarrier® MBR 1.5 | 1500 | Class I | ||
BioBarrier® MBR 1.5-N | 1500 | Class I | ||
MicroFast 0.4 | 400 | Class I | ||
MicroFast 0.5[1] | 500 | Class I | ||
MicroFast 0.625 | 625 | Class I | ||
MicroFast 0.75[2] | 750 | Class I | ||
MicroFast 0.9[3] | 900 | Class I | ||
MicroFast 1.5[4] | 1500 | Class I | ||
[1] Beginning with serial number MCF2265B. [2] Beginning with serial number MCF4000B. [3] Beginning with serial number MCF3026B. [4] Beginning with serial number MCF6006B. |
NOTE: Units accepted with either concrete, fiberglass or plastic tanks. This company may sell products complying with all applicable requirements for Certification nationally and internationally, but has advised NSF of authorized representatives physically located in the following: Alaska Arizona British Columbia California Colorado Florida Georgia Hawaii Idaho Illinois Iowa Kansas Maryland Massachusetts Michigan Minnesota Missouri Nevada New Mexico New York North Carolina Nova Scotia Ohio Oklahoma Ontario Pennsylvania South Carolina Texas Vermont Virginia Washinghton Wisconsin Contact the Listed company directly for further product information and availability in your area.
Bionest Technologies Inc | |
55, 12e Rue | |
C.P. 10070 | |
Shawinigan, QC G9T 5K7 | |
Canada | |
866-538-5662 | |
819-538-5662 | |
Visit this company's website |
Facility : Shawinigan, Québec, Canada
Model Number | Rated Capacity Gallons/Day |
Classification |
OT-100 | 1000 | Class I |
OT-125 | 1250 | Class I |
OT-150 | 1500 | Class I |
OT-40 | 400 | Class I |
OT-45 | 450 | Class I |
OT-50 | 500 | Class I |
OT-55 | 550 | Class I |
OT-60 | 600 | Class I |
OT-70 | 700 | Class I |
OT-75 | 750 | Class I |
Busse GmbH | |
Zaucheweg 6 | |
D-04316 Leipzig | |
Germany | |
49 341 6598425 |
Facility : Leipzig, Germany
Model Number | Rated Capacity Gallons/Day |
Classification |
BusseGT 400 | 400 | Class I |
BusseGT 500 | 500 | Class I |
BusseGT 600 | 600 | Class I |
BusseGT 800 | 800 | Class I |
BusseGT 1000 | 1000 | Class I |
BusseGT 1200 | 1200 | Class I |
Canwest Tanks and Ecological Systems Ltd. | |
11975 Old Yale Road | |
Surrey, BC V3V 3X4 | |
Canada | |
604-376-4843 |
Facility : Surrey, British Columbia, Canada
Model Number | Rated Capacity Gallons/Day |
Classification |
CWS MBBR Series |
||
CWS-MBBR-1000 | 1000 | Class I |
CWS-MBBR-800 | 800 | Class I |
CWS-MBBR-600 | 600 | Class I |
CWS-MBBR-500 | 500 | Class I |
CWS-MBBR-1500 | 1500 | Class I |
Clearstream Wastewater Systems, Inc. | |
P.O. Box 7568 | |
Beaumont, TX 77726-7568 | |
United States | |
409-755-1500 |
Facility : Lumberton, TX
Model Number | Rated Capacity Gallons/Day |
Classification | ||
500N[1] [2] [3] | 500 | Class I | ||
500NC[1] [2] [3] | 500 | Class I | ||
500NC2[1] [2] [3] | 500 | Class I | ||
500NC3[1] [2] [3] | 500 | Class I | ||
500NCS[1] [2] [3] | 500 | Class I | ||
500NS[1] [2] [3] | 500 | Class I | ||
500NU[1] [2] [3] | 500 | Class I | ||
600N[1] [2] [3] | 600 | Class I | ||
600NC[1] [2] [3] | 600 | Class I | ||
600NC2[1] [2] [3] | 600 | Class I | ||
600NC3[1] [2] [3] | 600 | Class I | ||
600NU[1] [2] [3] | 600 | Class I | ||
750N[1] [2] [3] | 750 | Class I | ||
750NC[1] [2] [3] | 750 | Class I | ||
750NC2[1] [2] [3] | 750 | Class I | ||
800N[1] [2] [3] | 800 | Class I | ||
800NC[1] [2] [3] | 800 | Class I | ||
800NC2[1] [2] [3] | 800 | Class I | ||
1000N[1] [2] [3] | 1000 | Class I | ||
1000N-B[1] [2] [3] | 1000 | Class I | ||
1000NC[1] [2] [3] | 1000 | Class I | ||
1000NC-B[1] [2] [3] | 1000 | Class I | ||
1000NCD[1] [2] [3] | 1000 | Class I | ||
1000ND[1] [2] [3] | 1000 | Class I | ||
1000NSD[1] [2] [3] | 1000 | Class I | ||
1200NCD[1] [2] [3] | 1200 | Class I | ||
1200ND[1] [2] [3] | 1200 | Class I | ||
1500N[1] [2] [3] | 1500 | Class I | ||
1500N-B[1] [2] [3] | 1500 | Class I | ||
1500NC[1] [2] [3] | 1500 | Class I | ||
1500NC-B[1] [2] [3] | 1500 | Class I | ||
1500NCD[1] [2] [3] | 1500 | Class I | ||
1500ND[1] [2] [3] | 1500 | Class I | ||
[1] Tested and Certified with a pretreatment tank. Model 500NC2 includes 500 gallon pretreatment tank. Model 500NC3 includes 500 gallon pretreatment tank. Model 500NU includes 300 gallon pretreatment tank. Model 600NC2 includes 500 gallon pretreatment tank. Model 600NC3T includes 400 gallon pretreatment tank. Model 600NU includes 400 gallon pretreatment tank. Model 750NC2 includes 500 gallon pretreatment tank. Model 800NC2 includes 500 gallon pretreatment tank. Model 1000NCD includes 500 gallon pretreatment tank. Model 1200NCD includes 600 gallon pretreatment tank. Model 1500NCD includes 750 gallon pretreatment tank. [2] Tested and Certified with and without a pump tank. Model 500NC3-500 includes 500 gallon effluent pump tank. Model 500NC3-750 includes 750 gallon effluent pump tank. Model 500NU includes 550 gallon effluent pump tank. Model 600NC3T includes 720 gallon effluent pump tank. Model 600NU includes 680 gallon effluent pump tank. [3] Tested and Certified with and without model CS-1100 Effluent Filter in the effluent pump tank. |
NOTE: Suffix N - Fiberglass tanks Suffix NC - Concrete tanks Suffix NC2 - One piece concrete design with pretreatment tank Suffix NC3 - One piece concrete design with pretreatment and effluent pump tanks Suffix ND - Duel piece fiberglass design with pretreatment tank Suffix NU - One piece fiberglass design with pretreatment and effluent pump tanks This company may sell products complying with all applicable requirements for Certification nationally and internationally, but has advised NSF of authorized representatives physically located in the following: Alabama Alaska Arizona Arkansas California Colorado Delaware Florida Georgia Illinois Iowa Kansas Kentucky Michigan Missouri Nebraska New Mexico New York North Carolina Ohio Oklahoma Pennsylvania South Carolina Texas Virginia Washington West Virginia Wisconsin Contact the Listed company directly for further product information and availability in your area.
Consolidated Treatment Systems, Inc. | |
1501 Commerce Center Drive | |
Franklin, OH 45005 | |
United States | |
937-746-2727 | |
Visit this company's website |
Facility : Franklin, OH
Model Number | Rated Capacity Gallons/Day |
Classification | ||
Enviro-Guard ENV-0.75 | 750 | Class I | ||
Enviro-Guard ENV-0.75M[1] | 750 | Class I | ||
Multi-Flo FTB 0.5 | 500 | Class I | ||
Multi-Flo FTB 0.6 | 600 | Class I | ||
Multi-Flo FTB 0.6-C | 600 | Class I | ||
Multi-Flo FTB 0.75 | 750 | Class I | ||
Multi-Flo FTB 0.75-C | 750 | Class I | ||
Multi-Flo FTB 1.0 | 1000 | Class I | ||
Multi-Flo FTB 1.0-C | 1000 | Class I | ||
Multi-Flo FTB 1.5 | 1500 | Class I | ||
Nayadic M-6A[2] [3] | 500 | Class I | ||
Nayadic M-8A | 600 | Class I | ||
Nayadic M-1050A | 800 | Class I | ||
Nayadic M-1200A | 1000 | Class I | ||
Nayadic M-2000A | 1500 | Class I | ||
SYBR-AER 500 | 500 | Class I | ||
SYBR-AER 500-IM1530[4] | 500 | Class I | ||
SYBR-AER-SA1500[5] | 500 | Class I | ||
SYBR-AER 600 | 600 | Class I | ||
SYBR-AER 800 | 800 | Class I | ||
SYBR-AER 1000 | 1000 | Class I | ||
SYBR-AER 1500 | 1500 | Class I | ||
[1] System consists of a modular design with the pretreatment and dosing tank as separate 500 gallon tanks or as one two-compartment 1000 gallon tank. [2] Nayadic M-6A also a component of the Tank-N-Tank system. Complete Tank-N-Tank system has not been tested by NSF. Complete Tank-N-Tank system includes Nayadic M-6A 500 gpd treatment system surrounded by a pump chamber, creating a single tank system. Tank-N-Tank System is manufactured in both fiberglass and concrete. [3] Nayadic M-6A also a component of Nayadic M6-EV. The complete M6-EV system has not been tested by NSF. The complete M6-EV includes the Nayadic M-6A 500 gpd treatment system surrounded by a pretreatment tank, creating a single tank system. The M6-EV system is manufactured only in fiberglass. [4] Suffix IM1530 denotes molded poly tank. [5] Suffix SA1500 denotes fiberglass tank. |
NOTE: This company may sell products complying with all applicable requirements for Certification nationally and internationally, but has advised NSF of authorized representatives physically located in the following: Alabama Arizona Arkansas Florida Georgia Hawaii Illinois Iowa Maine Mississippi Missouri New Jersey New Mexico New York Ohio Pennsylvania Texas Virginia Washington West Virginia Wisconsin Contact the Listed company directly for further product information and availability in your area.
Desoto Concrete Products, Inc. | |
220 Highway 305 North | |
Olive Branch, MS 38654 | |
United States | |
888-445-9347 | |
662-890-1688 |
Facility : New Albany, MS
Model Number | Rated Capacity Gallons/Day |
Classification | ||
H-TWO-O Series 25A[1] [2] | 500 | Class I | ||
H-TWO-O Series 25T[3] [4] | 500 | Class I | ||
H-TWO-O Series 252P[5] | 520 | Class I | ||
H-TWO-O Series 265A[1] | 650 | Class I | ||
H-TWO-O Series 265P[5] | 650 | Class I | ||
H-TWO-O Series 275A[1] [2] | 750 | Class I | ||
H-TWO-O Series 275T[3] [6] | 750 | Class I | ||
H-TWO-O Series 275AA[7] | 780 | Class I | ||
H-TWO-O Series 275AT[8] | 780 | Class I | ||
H-TWO-O Series 2100A[1] [2] | 1000 | Class I | ||
H-TWO-O Series 2100T[3] | 1000 | Class I | ||
H-TWO-O Series 212P | 1200 | Class I | ||
H-TWO-O Series 35A[1] [3] [4] [5] | 500 | Class I | ||
H-TWO-O Series 35T[2] [6] [7] | 500 | Class I | ||
H-TWO-O Series 35A[1] [8] | 520 | Class I | ||
H-TWO-O Series 35AA | 520 | Class I | ||
H-TWO-O Series 35AA1 | 520 | Class I | ||
H-TWO-O Series 35AA8 | 520 | Class I | ||
H-TWO-O Series 355P | 550 | Class I | ||
H-TWO-O Series 36A1[1] | 600 | Class I | ||
H-TWO-O Series 375A[1] [3] | 750 | Class I | ||
H-TWO-O Series 375A2[9] | 750 | Class I | ||
H-TWO-O Series 375T[2] [10] | 750 | Class I | ||
H-TWO-O Series 375AA[11] | 780 | Class I | ||
H-TWO-O Series 375AT[12] | 780 | Class I | ||
H-TWO-O Series 3100A[1] [3] | 1000 | Class I | ||
H-TWO-O Series 3100T[2] | 1000 | Class I | ||
[1] Suffix A denotes a tampered wall tank. [2] Model H-TWO-O Series 25A, 275A, and 2100A also as a component of the H-TWO-O Series 25A1, 275A1, and 2100A1. Complete model H-TWO-O Series 25A1, 275A1, and 2100A1 includes a post treatment pump tank in addition to the H-TWO-O Series 25A, 275A, and 2100A. The pump chamber was not tested and is not included as a component of the Certified model. [3] Suffix T denotes a tampered wall tank. [4] Model H-TWO-O Series 25T also as a component of the H-TWO-O Series 25T1 and 25T2 with effluent pump chamber. The pump chamber was not tested and is not included as a component of the Certified model. [5] Suffix P denotes polyethylene tanks. [6] Model H-TWO-O Series 275T also as a component of the H-TWO-O Series 275T1 and 275T2 with effluent pump chamber. The pump chamber was not tested and is not included as a component of the Certified model. [7] Suffix AA indicates alternate (as in 750 GPD to 780 GPD) and a one piece tank. [8] Suffix AT indicates alternate (as in 750 GPD to 780 GPD) with a tampered wall and two piece tank. [9] Model H-TWO-O Series 375A2 is approved with a pretreatment chamber sized between 500 and 750 gallons. [10] Model H-TWO-O Series 375T also as a component of the H-TWO-O Series 375T1 and 375T2 with effluent pump chamber. The pump chamber was not tested and is not included as a component of the Certified model. [11] Suffix AA indicates alternate (as in 750 GPD to 780 GPD) and a one piece tank. [12] Suffix AT indicates alternate (as in 750 GPD to 780 GPD) with a tampered wall and two piece tank. |
NOTE: This company may sell products complying with all applicable requirements for Certification nationally and internationally, but has advised NSF of authorized representatives physically located in the following: Mississippi Texas Contact the Listed company directly for further product information and availability in your area.
E-Z Treat | |
P.O. Box 176 | |
Haymarket, VA 20618 | |
United States | |
703-753-4770 | |
Visit this company's website |
Facility : Catlett, VA
Model Number | Rated Capacity Gallons/Day |
Classification |
#600 | 600 | Class I |
D101 MODEL 600 2Pod 3Tank SIMPLEX | 1200 | Class I |
D110 MODEL 600 2Pod 4Tank DUPLEX | 1200 | Class I |
D111 MODEL 600 2Pod 4Tank SIMPLEX | 1200 | Class I |
D115 MODEL 600 2Pod 3Tank DUPLEX | 1200 | Class I |
D117 MODEL 600 1Pod 3Tank SIMPLEX | 600 | Class I |
D118 MODEL 600 1Pod 2Tank SIMPLEX | 600 | Class I |
D122 MODEL 600 1Pod 1Tank SIMPLEX | 600 | Class I |
D141 MODEL 600 1Pod 2Tank Gravity | 600 | Class I |
D147-INDP MODEL 600 2Pod 4Tank DUPLEX | 1200 | Class I |
D149 MODEL 600 1Pod 2Tank 2 pump-combo | 600 | Class I |
#750 | 750 | Class I |
D217 MODEL 750 1Pod 3Tank SIMPLEX | 750 | Class I |
D218 MODEL 750 1Pod 2Tank SIMPLEX | 750 | Class I |
D222 MODEL 750 1Pod 1Tank SIMPLEX | 750 | Class I |
D240 750 1Pod 2Tank SIMPLEX OVER SPTIC | 750 | Class I |
D241 750 1Pod 2Tank Gravity Discharge | 750 | Class I |
D246 MODEL 750 1Pod 2Tank Gravity Feed | 750 | Class I |
#1200 | 1200 | Class I |
D112 MODEL 1200 1Pod 4Tank SIMPLEX | 1200 | Class I |
D113 MODEL 1200 1Pod 4Tank DUPLEX | 1200 | Class I |
D116 MODEL 1200 1Pod 3Tank SIMPLEX | 1200 | Class I |
D119 MODEL 1200 1Pod 2Tank SIMPLEX | 1200 | Class I |
D142 1200 1Pod 2Tank Gravity Discharge | 1200 | Class I |
D148-INDP MODEL 600 2Pod 3Tank DUPLEX | 1200 | Class I |
D149 MODEL 1200 1Pod 4Tank SIMPLEX | 1200 | Class I |
D150 1200 1Pod 4Tank DUPLEX DUAL OUTLET | 1200 | Class I |
D151 1200 1Pod 3Tank Simplex DUAL OUTLET | 1200 | Class I |
D102 MODEL 1200 2Pod 3Tank SIMPLEX | 1500 | Class I |
D107 MODEL 1200 2Pod 4Tank SIMPLEX | 1500 | Class I |
D109 MODEL 1200 2Pod 4Tank DUPLEX | 1500 | Class I |
D114 MODEL 1200 2Pod 3Tank DUPLEX | 1500 | Class I |
D120 MODEL 600 3Pod 3Tank DUPLEX | 1500 | Class I |
D121 MODEL 600 3Pod 3Tank SIMPLEX | 1500 | Class I |
D128 MODEL 600 3Pod 4Tank DUPLEX | 1500 | Class I |
D152-INDP MODEL 1200 2Pod 4Tank DUPLEX | 1500 | Class I |
D153-INDP MODEL 1200 2Pod 3Tank DUPLEX | 1500 | Class I |
D201 MODEL 750 2Pod 3Tank SIMPLEX | 1500 | Class I |
D210 MODEL 750 2Pod 4Tank DUPLEX | 1500 | Class I |
D211 MODEL 750 2Pod 4Tank SIMPLEX | 1500 | Class I |
D215 MODEL 750 2Pod 3Tank DUPLEX | 1500 | Class I |
D225 MODEL 750 2Pod 2Tank SIMPLEX OVER | 1500 | Class I |
D247-INDP MODEL 750 2Pod 4Tank DUPLEX | 1500 | Class I |
D248-INDP MODEL 750 2Pod 3Tank DUPLEX | 1500 | Class I |
D249 MODEL 750 1Pod 2Tank 2 pump-combo | 750 | Class I |
NOTE: Each model may contain a combination of treatment pods that are either a 600 GPD module, a 750 GPD module or a 1200 GPD module. Various configurations of these modules are used to provide the essential wastewater treatment necessary for Standard compliance.
Ecological Tanks, Inc. | |
2247 Highway 151 North | |
Downsville, LA 71234 | |
United States | |
800-277-8179 | |
318-644-0397 | |
Visit this company's website |
Facility : Downsville, LA
Model Number | Rated Capacity Gallons/Day |
Classification | ||
AA500 - C, - OC[1] [2] [3] [4] [5] [6] [7] [8] | 500 | Class I | ||
AA500T - C[1] [5] [9] [10] | 500 | Class I | ||
AA500-35NR[11] | 500 | Class I | ||
AA600 - C[1] [5] [12] [13] | 600 | Class I | ||
AA750 - C, - OC[1] [5] [7] [14] | 750 | Class I | ||
AA750T - C[1] [5] [9] [15] | 750 | Class I | ||
AA800 - C[1] [5] [16] [17] | 800 | Class I | ||
AA1000 - C[1] [5] | 1000 | Class I | ||
AA1200 - C, - OC[1] [5] [6] [7] [18] | 1200 | Class I | ||
AA1500 - C, - OC[1] [5] [7] | 1500 | Class I | ||
AA1500T[5] | 1500 | Class I | ||
AS500L[19] [20] | 500 | Class I | ||
AS500L - C[19] [20] | 500 | Class I | ||
AS500L - EZ[19] [21] | 500 | Class I | ||
AS500 - F, C[1] [3] [20] [22] [23] [24] | 500 | Class I | ||
AS600 - F, C[1] [22] [24] [25] | 600 | Class I | ||
AS600+4NR w/EZ top[11] [26] | 600 | Class I | ||
AS600L[19] | 600 | Class I | ||
AS750 - F, C[1] [22] [24] | 750 | Class I | ||
AS800 - F[22] [24] | 800 | Class I | ||
AS800L[19] | 800 | Class I | ||
AS1000 - F, C[1] [22] [24] | 1000 | Class I | ||
AS1100L[19] | 1100 | Class I | ||
AS1200 - F[22] [24] | 1200 | Class I | ||
AS1500 - F, C[1] [22] [24] | 1500 | Class I | ||
[1] Suffix C denotes concrete tank. [2] Model AA500 also as a component of the models AA500-35, AA500-3432, AA500-3530, AA500-3575, AA500-4050 and AA500-4075. Complete models AA500-35, AA500-3432, AA500-3530, AA500-3575, AA500-4050 and AA500-4075 have not been tested and Certified by NSF. Complete models: - AA500-35 includes a 350 gallon pretreatment tank. - AA500-35C includes a 350 gallon pretreatment tank. - AA500-3432 includes a 340 gallon pretreatment tank and a 320 gallon pump tank. - AA500-3575 includes a 350 gallon pretreatment tank and a 750 gallon pump tank. - AA500-3530 includes a 350 gallon pretreatment tank and a 300 gallon pump tank. - AA500-4050 includes a 400 gallon pretreatment tank and a 500 gallon pump tank. - AA500-4075 includes a 400 gallon pretreatment tank and a 750 gallon pump tank. [3] Average influent wastewater characteristics were outside the 30-day averages specified by NSF/ANSI Standard 40, but were within the average for the overall test, supporting that mass loading of the influent was adequate. The 30-day effluent values were 10 mg/L or less with no effluent values discarded despite the influent variability. [4] Model AA500 also as a component of the model AA500-4090. Complete model AA500-4090 has not been tested and Certified by NSF. Complete model AA500-4090 includes a 400 gallon pretreatment tank and a 900 gallon pump tank. [5] Suffix AA denotes Aqua Aire. [6] Models AA500-OC include a 370 gallon pump tank and AA1200-OC include a 500 gallon pump tank. Complete models have not been tested and Certified by NSF. [7] Suffix OC denotes Ontario, Canada models. [8] Aqua Aire Model AA520-35 and Model AA520-3230 have been approved for a rated daily capacity of 520 GPD in the State of Mississippi. These Models have not been tested and Certified by NSF. [9] Suffix T denotes two-piece tank. [10] Model AA500T also as a component of the model AA500-32 single tank system. Complete model AA500-32 has not been tested and Certified by NSF. Complete model AA500-32 includes a 325 gallon pretreatment tank. Complete model AA500T-3550 system integrates a 500 GPD treatment unit with a 350 gallon pump tank. [11] Suffix NR denotes nitrogen reduction. Models AS600+4NR w/EZ top, AA500-35NR, and AA500-35C NR complete models include a pretreatment tank. [12] Model AA600 also as a component of the model AA600-50 single tank system. Complete model AA600-50 has not been tested and Certified by NSF. Complete model AA600-50 includes a 500 gallon pretreatment tank. Complete model number AA600-4030 includes a 400 gallon pretreatment tank and a 300 gallon pump tank. [13] Model AA600 also as a component of the model AA600W-4075. Complete model AA600W-4075 has not been tested and Certified by NSF. Complete model AA600W-4075 includes a 400 gallon pretreatment tank and a 750 gallon pump tank. [14] Model AA750-4290 also as a component of AA750. Complete model AA750-4290 includes a 425 gallon pre-treatment tank and a 900 gallon pump tank. Complete models have not been tested and certified by NSF. [15] Complete model number AA750T-50 integrates a 750 GPD treatment unit with a 500 gallon pump tank. [16] Model AA800 also as a component of the model AA800-00110 with an effluent pump tank of 1096 gallons. The pump tank was not tested and is not included as a component of the Certified model. [17] Model AA800 also as a component of the model AA800-65 single tank system. Complete model AA800-65 has not been tested and Certified by NSF. Complete model AA800-65 includes a 660 gallon pretreatment tank. [18] Model AA1200 also as a component of the model AA1200-00160 with an effluent pump tank of 1625 gallons. The pump tank was not tested and is not included as a component of the Certified Model. [19] Suffix L denotes low profile tank. Model AS500L also as a component of the models AS500L-C- 4+75, AS500L-CU, AS600L-CU, AS500L-EZ CU, AS600L-EZ CU, AS500L P4CU, AS500L-EZ P4CU, AS500L-C +5 Pre Pump, AS600L, AS600L-EZ, AS600L-C, AS800L, AS800L-EZ, AS800L-C, AS1100L, AS1100L-EZ, and AS1100L-C. Complete models AS500L-C 4+75, AS500L-CU, AS600L-CU, AS500L-EZ CU, AS600L-EZ CU, AS500L P4CU, AS500L-EZ P4CU, AS500L-C +5 Pre, AS500L-C Pump, AS600L, AS600L-EZ, AS800L, AS800L-EZ, AS800L-C, AS1100L, AS1100L-EZ, and AS1100L-C have not been tested and Certified by NSF. Complete models: AS500L-C 4+75 includes a 400 gallon pretreatment tank and a 750 gallon pump tank. AS500L-CU includes a 68 gallon chlorine contact chamber. AS600L-CU includes a 68 gallon chlorine contact chamber. AS500L-EZ-CU includes a 68 gallon chlorine contact chamber. AS600L-EZ-CU includes a 68 gallon chlorine contact chamber. AS500L-P4CU includes a 400 gallon pretreatment tank and a 68 gallon chlorine contact chamber. AS500L-C +5 Pre includes a 500 gallon pretreatment tank. AS500L-C +5 Pump includes a 500 gallon pump tank. [20] Aqua Safe Model AS520, Model AS520 CU, Model AS520 + 3 Pump Duo, Model AS520L, Model AS520L + 3 Pump Duo, and Model AS520L CU have been approved for a rated daily capacity of 520 GPD in the State of Mississippi. These Models have not been tested and Certified by NSF. [21] Suffix EZ denotes that the system comes with a base and cover for the compressor that can be installed over the FG riser. [22] Suffix F denotes fiberglass tank. [23] Model AS500 also as a component of the complete models AS500-PRE, AS500-EZ, AS500-5PUMP, AS500-CU, AS500-P5CU, AS500-5+5, AS500-5+5E, AS500-4+75 and AS500-166. These complete models have not been tested and Certified by NSF. Complete models: - AS500-5PRE includes a 516 gallon pretreatment tank. - AS500-5PUMP includes a 500 gallon pump tank. - AS500-CU includes a 68 gallon chlorine contact tank. - AS500-P5CU includes a 516 gallon pretreatment tank and a 68 gallon chlorine contact tank. - AS500-4+75 includes a 400 gallon pretreatment tank and a 750 gallon pump tank. - AS500-5+5 includes a 516 gallon pretreatment tank and a 516 gallon pump tank. - AS500-5+5E includes a 516 gallon pretreatment tank and a 580 gallon elliptical pump tank. - AS500-5+75 includes a 516 gallon pretreatment tank and a 750 gallon pump tank. - AS500-166 includes a 166 gallon pump tank. [24] Suffix AS denotes Aqua Safe. [25] Model AS600 also as a component of the complete models AS600-166 and AS600-CU. Complete models have not been tested and Certified by NSF. Complete models: - AS600-CU includes a 68 gallon chlorine contact tank. - AS600-166 includes a 166 gallon pump tank. [26] Model AS600+4 NR also as a component of the models AS600 5+5 TRIO NR, AS600 5+75 TRIO NR, AS600 4+75-C NR, AS600+5-C NR, AS600 +5 CP NR, and AS600 +5 C CP NR have not been tested and Certified by NSF. Complete models: AS600 5+5 TRIO NR includes a 500 gallon pretreatment tank and a 500 gallon pump tank. AS600 5+75 TRIO NR includes a 500 gallon pretreatment tank and a 750 gallon pump tank. AS600 4+75-C NR includes a 400 gallon pretreatment tank and a 750 gallon pump tank. AS600 +5-C NR includes a 500 gallon pretreatment tank. AS600 +5 CP NR includes a 500 gallon detached pretreatment tank. AS600 +5 C CP NR includes a 500 gallon detached pretreatment tank. |
NOTE: This company may sell products complying with all applicable requirements for Certification nationally and internationally, but has advised NSF of authorized representatives physically located in the following: Alabama Arkansas British West Indies (Turks and Caicos Islands) California Florida Georgia Hawaii Illinois Iowa Kansas Louisiana Mississippi Missouri New Mexico New York Ohio Oklahoma Pennsylvania South Carolina South Dakota Texas Virginia West Virginia Contact the Listed company directly for further product information and availability in your area. NOTE: Only products bearing the NSF Mark on the product are Certified.
Eljen Corporation | |
90 Meadow Road | |
Windsor, CT 06095 | |
United States | |
800-444-1359 | |
860-610-0426 |
Facility : Windsor, CT
Model Number | Rated Capacity Gallons/Day |
Classification | ||
Eljen GSF Denitrification System |
||||
DN450 | 450 | Class I | ||
DN600 | 600 | Class I | ||
DN800 | 800 | Class I | ||
DN1000 | 1000 | Class I | ||
GSF Advanced Treatment (AT) Systems[1] [2] [3] [4] [5] [6] |
||||
LT-450 | 450 | Class I | ||
SP-450 | 450 | Class I | ||
LT-600 | 600 | Class I | ||
SP-600 | 600 | Class I | ||
LT-750 | 750 | Class I | ||
SP-750 | 750 | Class I | ||
LT-900 | 900 | Class I | ||
SP-900 | 900 | Class I | ||
LT-1050 | 1050 | Class I | ||
SP-1050 | 1050 | Class I | ||
LT-1200 | 1200 | Class I | ||
SP-1200 | 1200 | Class I | ||
LT-1350 | 1350 | Class I | ||
SP-1350 | 1350 | Class I | ||
LT-1500 | 1500 | Class I | ||
SP-1500 | 1500 | Class I | ||
[1] Prefix SP denotes combined or bottomless discharge. Prefix LT denotes single point discharge. [2] Table A, Minimum Sizing and Dimensions NSF 40 Class I Certified GSF Advanced Treatment (AT) Systems SP and LT Models Model Number Design Daily Minimum Minimum Units Flow Total Footprint Tank Size Required (ft2) (gal.) SP-450 & LT-450 450 225 1000 18 SP-600 & LT-600 600 297 1250 24 SP-750 & LT-750 750 369 1500 30 SP-900 & LT-900 900 441 2000 36 SP-1050 & LT-1050 1050 513 2250 42 SP-1200 & LT-1200 1200 585 2500 48 SP-1350 & LT-1350 1350 657 2750 54 SP-1500 & LT-1500 1500 729 3000 60 [3] Maximum loading rate of 3 gallons per square foot onto the Eljen GSF Media, while maintaining a maximum hydraulic loading to the underlying soil system as 2 gallons per square foot per day. The GSF Advanced Treatment (AT) Systems can be installed in a bed configuration with a minimum spacing along both sides of modules of 6 inches. A minimum of 6 inches of Specified Sand is placed at the beginning and end of each row. [4] Minimum requirement of 6 inches of system sand below the GSF Wastewater Treatment System. [5] While the GSF Advanced Treatment (AT) Systems includes design specifications similar to a dispersal field, the scope of the NSF/ANSI Standard 40 Class I Certification does NOT include management methods for the treated effluent discharged from the system. [6] The GSF Advanced Treatment (AT) Systems are approved with the modules A66 (6 inch height), A42 (7 inch height), and B43 (7 inch height, 36 inches wide). |
Enviro-Flo Inc. | |
235 Flowood Drive | |
Flowood, MS 39232 | |
United States | |
877-836-8476 | |
877-836-8476 |
Facility : Flowood, MS
Model Number | Rated Capacity Gallons/Day |
Classification | ||
E-500[1] | 500 | Class I | ||
E-500P[2] | 500 | Class I | ||
E-550 | 550 | Class I | ||
E-600 | 600 | Class I | ||
E-750 | 750 | Class I | ||
E-1000 | 1000 | Class I | ||
E-1500 | 1500 | Class I | ||
E500F[3] | 500 | Class I | ||
[1] Model E-500 also as a component of the one piece tank design models E5P35, E5P37, and E5P57. These complete models have not been tested by NSF. Complete models: - E5P35 includes a 302 gallon pretreatment and a 503 gallon pump chamber. - E5P37 includes a 302 gallon pretreatment and a 752 gallon pump chamber. - E5P57 includes a 503 gallon pretreatment and a 752 gallon pump chamber. [2] Suffix P denotes polyethylene tank. [3] Suffix F denotes fiberglass tank. |
Fuji Clean USA, LLC | |
41-2 Greenwood Road | |
Brunswick, ME 04011 | |
United States | |
207-406-2927 |
Facility : Thomson, GA
Model Number | Rated Capacity Gallons/Day |
Classification |
CE10 | 1000 | Class I |
CE14 | 1350 | Class I |
CE5 | 500 | Class I |
CE7 | 700 | Class I |
CEN10 | 1000 | Class I |
CEN14 | 1350 | Class I |
CEN5 | 500 | Class I |
CEN7 | 700 | Class I |
Facility : Brunswick, ME
Model Number | Rated Capacity Gallons/Day |
Classification |
CE5 | 500 | Class I |
CE7 | 700 | Class I |
CE10 | 1000 | Class I |
CE14 | 1350 | Class I |
CEN5 | 500 | Class I |
CEN7 | 700 | Class I |
CEN10 | 1000 | Class I |
CEN14 | 1350 | Class I |
Henry McGrew LLC | |
3822 East Texas | |
Bossier City, LA 71111 | |
United States | |
318-746-2380 |
Facility : Bossier City, LA
Model Number | Rated Capacity Gallons/Day |
Classification | ||
500-T[1] | 500 | Class I | ||
500-P300[2] | 500 | Class I | ||
600-T[1] | 600 | Class I | ||
750-T[1] | 750 | Class I | ||
750-P500[3] | 750 | Class I | ||
1000-T[1] | 1000 | Class I | ||
JS 520 T[1] | 520 | Class I | ||
JS 520 TP[1] [4] | 520 | Class I | ||
JS 600 T[1] | 600 | Class I | ||
JS 600 TP[1] [4] | 600 | Class I | ||
JS 750 T[1] | 750 | Class I | ||
JS 750 TP[1] [4] | 750 | Class I | ||
JS 800 T[1] | 800 | Class I | ||
JS 800 TP[1] [4] | 800 | Class I | ||
JS 840 P AA[4] [5] | 840 | Class I | ||
JS 1000 T[1] | 1000 | Class I | ||
JS 1000 T AA[1] [5] | 1000 | Class I | ||
[1] Suffix T denotes a tapered wall tank. [2] JetSpray 500-p300 denotes a 300 gallon pump tank. Suffix p denotes pump tank. [3] JetSpray 750-p500 denotes a 500 gallon pump tank. Suffix p denotes pump tank. [4] Suffix P denotes a built on pump tank. [5] Suffix AA denotes a separate pretreatment. |
Hoot Systems, LLC | |
2885 Highway 14 East | |
Lake Charles, LA 70607 | |
United States | |
888-878-4668 | |
337-474-2804 | |
Visit this company's website |
Facility : Lake Charles, LA
Model Number | Rated Capacity Gallons/Day |
Classification | ||
ANR-450 | 450 | Class I | ||
ANR-500 | 500 | Class I | ||
ANR-675 | 675 | Class I | ||
ANR-800 | 800 | Class I | ||
ANR-900 | 900 | Class I | ||
ANR-1100 | 1100 | Class I | ||
H-500A[1] | 500 | Class I | ||
H500AFT[2] | 500 | Class I | ||
H-600A[3] | 600 | Class I | ||
H600AFT[2] | 600 | Class I | ||
H-750A[4] | 750 | Class I | ||
H-900A[5] | 900 | Class I | ||
H-1000A[6] | 1000 | Class I | ||
H-1200A[7] | 1200 | Class I | ||
LA-500[8] [9] | 500 | Class I | ||
LA-500B[8] | 500 | Class I | ||
LA-500P[10] | 500 | Class I | ||
LA-500S[8] [11] | 500 | Class I | ||
LA-600 | 600 | Class I | ||
LA-850 | 850 | Class I | ||
LA-1000[12] | 1000 | Class I | ||
LA-1000S[11] [12] | 1000 | Class I | ||
LA-1000ALP[13] | 1000 | Class I | ||
NR-600 | 600 | Class I | ||
[1] Model H-500A also as a component of the models H-500 AN/AW/AS/AT/AND/ASD/ATD. These complete models have not been tested by NSF. Complete models: H-500AN/AW/AND include a 760 gallon pump tank. H-500AS/AT/ASD/ATD include a 1010 gallon pump tank. [2] Suffix FT denotes fiberglass tank. [3] Model H-600A also as a component of the models H-600AN/AT/AND. These complete models have not been tested by NSF. Complete models H-600AN/AT/AND include a 1010 gallon pump tank. [4] Model H-750A also as a component of the models H-750AN/AW/AH/AND. These complete models have not been tested by NSF. Complete models H-750AN/AW/AH/AND include a 1700 gallon pump tank. [5] Model H-900A also as a component of the models H-900AN/AT/AND. These complete models have not been tested by NSF. Complete models H-900AN/AT/AND include a 1700 gallon pump tank. [6] Model H-1000A also as a component of the models H-1000AD/AN/AW/AND. These complete models have not been tested by NSF. Complete models H-1000 AD/AN/AW/AND include a 1469 gallon pump tank. [7] Model H-1200A also as a component of the models H-1200AN/AT/AND. These complete models have not been tested by NSF. Complete models H-1200AN/AT/AND include a 1469 gallon pump tank. [8] Models LA-500, LA-500S and LA-500B also have components of the models LA-500TP and LA-500TPS, respectively. These complete models have not been tested by NSF. Complete models: LA-500TP includes a pretreatment and pump tank. LA-500TPS denotes a straight walled tank with a pretreatment and pump tank. [9] Average influent wastewater characteristics were outside the 30-day averages specified by NSF/ANSI Standard 40, but were within the average for the overall test, supporting that mass loading of the influent was adequate. The 30-day effluent values were 10 mg/L or less with no effluent values discarded despite the influent variability. [10] Suffix P denotes PVC Tank [11] Suffix S denotes a straight walled, one piece tank with lid. [12] Models LA-1000 and LA-1000S also as components of the models LA-1000TP and LA-1000TPS respectively. These complete models have not been tested by NSF. Complete models: LA-1000TP includes a pretreatment and pump tank. LA-1000TPS denotes a straight walled tank with a pretreatment and pump tank. [13] Suffix ALP denotes alternative low profile. |
NOTE: This company may sell products complying with all applicable requirements for Certification nationally and internationally, but has advised NSF of authorized representatives physically located in the following: Alabama Arizona California Colorado Delaware Florida Illinois Iowa Kansas Louisiana Maine Maryland Massachusetts Minnesota Mississippi New Jersey North Carolina Ohio Oklahoma Pennsylvania Texas Virginia Washington Wisconsin Contact the Listed company directly for further product information and availability in your area.
Hydro-Action Industries | |
1919 Jim Neu Drive | |
Plymouth, IN 46563 | |
United States | |
800-370-3749 | |
574-936-2542 |
Facility : Plymouth, IN
Model Number | Rated Capacity Gallons/Day |
Classification | ||
AN-400[1] | 450 | Class I | ||
AN-500 | 550 | Class I | ||
AN-600 | 600 | Class I | ||
AN-600 | 660 | Class I | ||
AN-800 | 800 | Class I | ||
AN-1100 | 1100 | Class I | ||
AP-500[2] [3] | 500 | Class I | ||
AP-600 | 600 | Class I | ||
AP-750 | 750 | Class I | ||
AP-1000G | 1000 | Class I | ||
AP-1500G | 1500 | Class I | ||
CLP-500 | 500 | Class I | ||
CLP-600 | 600 | Class I | ||
LP-500[4] | 500 | Class I | ||
[1] Model AN-400 also as a component of the model AN-IVS. Complete model AN-IVS has not been tested by NSF. Complete model AN-IVS includes a pretreatment tank of 450 gallons and an aerobic treatment unit of 950 gallons [2] Model AP-500 also as a component of the model Set-N-Go. Complete model Set-N-Go has not been tested by NSF. Complete model Set-N-Go includes a pretreatment tank of either 250, 300, 375, 500, 625, or 750 gallons and a pump tank of either 250, 300, 375, 500, 625, or 750 gallons. [3] The audible portion of this product's failure sensing and signaling equipment was between 70 and 90 dBA at 1.5 meters. [4] Prefix LP denotes low profile. |
NOTE: This company may sell products complying with all applicable requirements for Certification nationally and internationally, but has advised NSF of authorized representatives physically located in the following: California Illinois Indiana Iowa Michigan North Carolina Ohio West Virginia Contact the Listed company directly for further product information and availability in your area.
Infiltrator Water Technologies, LLC | |
4 Business Park | |
P.O. Box 768 | |
Old Saybrook, CT 06475 | |
United States | |
800-221-4436 | |
860-577-7000 | |
Visit this company's website |
Facility : Salisbury, NC
Model Number | Rated Capacity Gallons/Day |
Classification | ||
ATL-1050[1] | 1050 | Class I | ||
ATL-1200[1] | 1200 | Class I | ||
ATL-1350[1] | 1350 | Class I | ||
ATL-1500[1] | 1500 | Class I | ||
ATL-450[1] | 450 | Class I | ||
ATL-600[1] | 600 | Class I | ||
ATL-750[1] | 750 | Class I | ||
ATL-900[1] | 900 | Class I | ||
[1] Only products bearing the NSF Mark on the product (alarm panel, aeration equipment, tank or riser) shipped with the product are certified. |
Infiltrator Water Technologies, LLC (formerly Presby Environmental, Inc.) | |
4 Business Park Road | |
Old Saybrook, CT 06475 | |
United States | |
800-473-5298 | |
603-837-3826 | |
Visit this company's website |
Facility : Whitefield, NH
Model Number | Rated Capacity Gallons/Day |
Classification | ||
Advanced Enviro-Septic® Treatment System[1] [2] [3] |
||||
AES-CTD-450 | 450 | Class I | ||
AES-CTD-600 | 600 | Class I | ||
AES-CTD-750 | 750 | Class I | ||
AES-CTD-900 | 900 | Class I | ||
AES-CTD-1050 | 1050 | Class I | ||
AES-CTD-1200 | 1200 | Class I | ||
AES-CTD-1350 | 1350 | Class I | ||
AES-CTD-1500 | 1500 | Class I | ||
AES-SPD-450 | 450 | Class I | ||
AES-SPD-600 | 600 | Class I | ||
AES-SPD-750 | 750 | Class I | ||
AES-SPD-900 | 900 | Class I | ||
AES-SPD-1050 | 1050 | Class I | ||
AES-SPD-1200 | 1200 | Class I | ||
AES-SPD-1350 | 1350 | Class I | ||
AES-SPD-1500 | 1500 | Class I | ||
[1] Prefix CTD denotes combined or bottomless discharge. Prefix SPD denotes single point discharge. Prefix AES denotes Advanced Enviro-Septic®. Prefix SS denotes Simple Septic®. Prefix ES denotes Enviro-Septic®. [2] Table A, Minimum Sizing and Dimensions NSF 40 Class I Certified Advanced Enviro-Septic® Models, Simple Septic®, & Enviro-Septic® Models Model Number Design Daily Minimum Minimum Septic Septic Flow Total Pipe Tank Size Length (ft.) (gal.) XX-SPD 450 & XX-CTD 450 450 150 1000 XX-SPD 600 & XX-CTD 600 600 200 1200 XX-SPD 750 & XX-CTD 750 750 250 1500 XX-SPD 900 & XX-CTD 900 900 300 1800 XX-SPD 1050 & XX-CTD 1050 1050 350 2100 XX-SPD 1200 & XX-CTD 1200 1200 400 2400 XX-SPD 1350 & XX-CTD 1350 1350 450 2700 XX-SPD 1500 & XX-CTD 1500 1500 500 3000 Maximum loading of 3.0 gallons per linear foot of AES, SS or ES pipe. Minimum spacing of pipe rows – eighteen inches (18") on center (i.e. minimum one-half foot (6") of system sand between pipe rows). Note: All models include 6 in. of system sand below pipes for treatment. [3] While the Presby treatment system includes design specifications similar to a dispersal field, the scope of the NSF/ANSI Standard 40 Class I Certification does NOT include management methods for the treated effluent discharged from the system. |
||||
Simple Septic® Treatment System[1] [2] [3] |
||||
SS-SPD 450 | 450 | Class I | ||
SS-SPD 600 | 600 | Class I | ||
SS-SPD 750 | 750 | Class I | ||
SS-SPD 900 | 900 | Class I | ||
SS-SPD 1050 | 1050 | Class I | ||
SS-SPD 1200 | 1200 | Class I | ||
SS-SPD 1350 | 1350 | Class I | ||
SS-SPD 1500 | 1500 | Class I | ||
SS-CTD 450 | 450 | Class I | ||
SS-CTD 600 | 600 | Class I | ||
SS-CTD 750 | 750 | Class I | ||
SS-CTD 900 | 900 | Class I | ||
SS-CTD 1050 | 1050 | Class I | ||
SS-CTD 1200 | 1200 | Class I | ||
SS-CTD 1350 | 1350 | Class I | ||
SS-CTD 1500 | 1500 | Class I | ||
[1] Prefix CTD denotes combined or bottomless discharge. Prefix SPD denotes single point discharge. Prefix AES denotes Advanced Enviro-Septic®. Prefix SS denotes Simple Septic®. Prefix ES denotes Enviro-Septic®. [2] Table A, Minimum Sizing and Dimensions NSF 40 Class I Certified Advanced Enviro-Septic® Models, Simple Septic®, & Enviro-Septic® Models Model Number Design Daily Minimum Minimum Septic Septic Flow Total Pipe Tank Size Length (ft.) (gal.) XX-SPD 450 & XX-CTD 450 450 150 1000 XX-SPD 600 & XX-CTD 600 600 200 1200 XX-SPD 750 & XX-CTD 750 750 250 1500 XX-SPD 900 & XX-CTD 900 900 300 1800 XX-SPD 1050 & XX-CTD 1050 1050 350 2100 XX-SPD 1200 & XX-CTD 1200 1200 400 2400 XX-SPD 1350 & XX-CTD 1350 1350 450 2700 XX-SPD 1500 & XX-CTD 1500 1500 500 3000 Maximum loading of 3.0 gallons per linear foot of AES, SS or ES pipe. Minimum spacing of pipe rows – eighteen inches (18") on center (i.e. minimum one-half foot (6") of system sand between pipe rows). Note: All models include 6 in. of system sand below pipes for treatment. [3] While the Presby treatment system includes design specifications similar to a dispersal field, the scope of the NSF/ANSI Standard 40 Class I Certification does NOT include management methods for the treated effluent discharged from the system. |
||||
Enviro-Septic® Treatment System[1] [2] [3] |
||||
ES-CTD-450 | 450 | Class I | ||
ES-CTD-600 | 600 | Class I | ||
ES-CTD-750 | 750 | Class I | ||
ES-CTD-900 | 900 | Class I | ||
ES-CTD-1050 | 1050 | Class I | ||
ES-CTD-1200 | 1200 | Class I | ||
ES-CTD-1350 | 1350 | Class I | ||
ES-CTD-1500 | 1500 | Class I | ||
ES-SPD-450 | 450 | Class I | ||
ES-SPD-600 | 600 | Class I | ||
ES-SPD-750 | 750 | Class I | ||
ES-SPD-900 | 900 | Class I | ||
ES-SPD-1050 | 1050 | Class I | ||
ES-SPD-1200 | 1200 | Class I | ||
ES-SPD-1350 | 1350 | Class I | ||
ES-SPD-1500 | 1500 | Class I | ||
[1] Prefix CTD denotes combined or bottomless discharge. Prefix SPD denotes single point discharge. Prefix AES denotes Advanced Enviro-Septic®. Prefix SS denotes Simple Septic®. Prefix ES denotes Enviro-Septic®. [2] Table A, Minimum Sizing and Dimensions NSF 40 Class I Certified Advanced Enviro-Septic® Models, Simple Septic®, & Enviro-Septic® Models Model Number Design Daily Minimum Minimum Septic Septic Flow Total Pipe Tank Size Length (ft.) (gal.) XX-SPD 450 & XX-CTD 450 450 150 1000 XX-SPD 600 & XX-CTD 600 600 200 1200 XX-SPD 750 & XX-CTD 750 750 250 1500 XX-SPD 900 & XX-CTD 900 900 300 1800 XX-SPD 1050 & XX-CTD 1050 1050 350 2100 XX-SPD 1200 & XX-CTD 1200 1200 400 2400 XX-SPD 1350 & XX-CTD 1350 1350 450 2700 XX-SPD 1500 & XX-CTD 1500 1500 500 3000 Maximum loading of 3.0 gallons per linear foot of AES, SS or ES pipe. Minimum spacing of pipe rows – eighteen inches (18") on center (i.e. minimum one-half foot (6") of system sand between pipe rows). Note: All models include 6 in. of system sand below pipes for treatment. [3] While the Presby treatment system includes design specifications similar to a dispersal field, the scope of the NSF/ANSI Standard 40 Class I Certification does NOT include management methods for the treated effluent discharged from the system. |
Infiltrator Water Technologies, LLC, (formerly Delta Treatment Systems, LLC) | |
4 Business Park Road | |
Old Saybrook, CT 06475 | |
United States | |
225-665-6162 | |
Visit this company's website |
Facility : Walker, LA
Model Number | Rated Capacity Gallons/Day |
Classification | ||
Enviro-Aire Series |
||||
EA50 | 500 | Class I | ||
EA52.5 | 525 | Class I | ||
EA60 | 600 | Class I | ||
EA75 | 750 | Class I | ||
EA80-CA | 800 | Class I | ||
ECOPOD Series[1] |
||||
E50-FF | 500 | Class I | ||
E50FF01 | 500 | Class I | ||
E50FF02 | 500 | Class I | ||
E50-NCA | 500 | Class I | ||
E50-N[2] | 500 | Class I | ||
E60-FF | 600 | Class I | ||
E60-NCA | 600 | Class I | ||
E60-N[2] | 600 | Class I | ||
E75-FF | 750 | Class I | ||
E75-NCA | 750 | Class I | ||
E75-N[2] | 750 | Class I | ||
E100-FF | 1000 | Class I | ||
E100-NCA | 1000 | Class I | ||
E100-N - IM1530[3] | 1000 | Class I | ||
E150-FF | 1500 | Class I | ||
E150-NCA | 1500 | Class I | ||
[1] Registered trade name is Whitewater. Suffix A denotes auxiliary model. Suffix C denotes concrete tank with fiberglass top. Suffix CA denotes concrete tank with flat concrete top. Suffix CC denotes concrete tank with raised concrete top. Suffix F denotes fiberglass tank and top. Suffix FF denotes flanged fiberglass tank and top. Suffix FT denotes fiberglass tapered tank with fiberglass top. Suffix FFT denotes flanged fiberglass tapered tank with fiberglass top. Suffix CA3 denotes an integral 3-compartment concrete tank with flat concrete top. Suffix FF3 denotes a 3-compartment fiber glass tank. [2] The use of the Infiltrator IM1060 and CM1060 polypropylene tanks are approved with the E50-N, E60-N and E75-N models. [3] Suffix IM1530 denotes polypropylene tank. |
||||
DF Series |
||||
DF40-C,F,CC,CA,FF,FT,FFT[1] [4] | 400 | Class I | ||
DF50-C,F,CC,CA,CA3,FF,FT,FFT[1] [4] [5] | 500 | Class I | ||
DF50A-C,F,CC,CA,FF,FT,FFT,FF3[1] [4] [6] | 500 | Class I | ||
DF60-C,F,CC,CA,FF,FT,FFT[1] [4] | 600 | Class I | ||
DF75-C,F,CC,CA,FF[1] [4] | 750 | Class I | ||
DF100-C,F,CC,CA,FF[1] [4] | 1000 | Class I | ||
DF100A-C,F,CC,CA,FF[1] [4] | 1000 | Class I | ||
DF100B-C,F,CC,CA,FF[1] [4] | 1000 | Class I | ||
DF150-C,F,CC,CA,FF[1] [4] | 1500 | Class I | ||
[1] Registered trade name is Whitewater. Suffix A denotes auxiliary model. Suffix C denotes concrete tank with fiberglass top. Suffix CA denotes concrete tank with flat concrete top. Suffix CC denotes concrete tank with raised concrete top. Suffix F denotes fiberglass tank and top. Suffix FF denotes flanged fiberglass tank and top. Suffix FT denotes fiberglass tapered tank with fiberglass top. Suffix FFT denotes flanged fiberglass tapered tank with fiberglass top. Suffix CA3 denotes an integral 3-compartment concrete tank with flat concrete top. Suffix FF3 denotes a 3-compartment fiber glass tank. [4] The audible portion of this product's failure sensing and signaling equipment was between 70 and 90 dBA at 1.5 meters. [5] Model DF50 also as a component of the Model CA3. Model UC50 also as a component of the model CA3. Complete models. DF50-CA3 and UC50-CA3 have not been tested by NSF. The complete models DF50-CA3 and UC50-CA3 have a pretreatment tank of either 500 or 750 gallons and a pump tank of 500, 750 or 1000 gallons. [6] Model DF50A also as a component of the model FF3. Complete models DF50A-FF3 has not been tested by NSF. The complete model DF50A-FF3 has a gallon pretreatment tank and a 750 gallon pump tank. |
||||
UC Series |
||||
UC50-F,CA,CA3,FF[1] [5] | 500 | Class I | ||
UC50A-CA,FF[1] | 500 | Class I | ||
UC60-CA,FF[1] | 600 | Class I | ||
UC60A-FF,CA[1] | 600 | Class I | ||
UC75A-CA,FF[1] | 750 | Class I | ||
UC90-F,CA,FF[1] | 900 | Class I | ||
UC100A-CA,FF[1] | 1000 | Class I | ||
UC120-F,CA,FF[1] | 1200 | Class I | ||
UC150-CA,FF[1] | 1500 | Class I | ||
UC150A-CA,FF[1] | 1500 | Class I | ||
[1] Registered trade name is Whitewater. Suffix A denotes auxiliary model. Suffix C denotes concrete tank with fiberglass top. Suffix CA denotes concrete tank with flat concrete top. Suffix CC denotes concrete tank with raised concrete top. Suffix F denotes fiberglass tank and top. Suffix FF denotes flanged fiberglass tank and top. Suffix FT denotes fiberglass tapered tank with fiberglass top. Suffix FFT denotes flanged fiberglass tapered tank with fiberglass top. Suffix CA3 denotes an integral 3-compartment concrete tank with flat concrete top. Suffix FF3 denotes a 3-compartment fiber glass tank. [5] Model DF50 also as a component of the Model CA3. Model UC50 also as a component of the model CA3. Complete models. DF50-CA3 and UC50-CA3 have not been tested by NSF. The complete models DF50-CA3 and UC50-CA3 have a pretreatment tank of either 500 or 750 gallons and a pump tank of 500, 750 or 1000 gallons. |
NOTE: This company may sell products complying with all applicable requirements for Certification nationally and internationally, but has advised NSF of authorized representatives physically located in the following: Alabama Alaska Arizona British Columbia British West Indies California Colorado Florida Georgia Hawaii Idaho Illinois Indiana Iowa Kentucky Louisiana Maine Maryland Michigan Minnesota Mississippi Missouri Montana Nevada New Mexico New York North Carolina Ohio Ontario Oklahoma Oregon Tennessee Texas Utah Virginia Washington West Virginia Wisconsin Contact the Listed company directly for further product information and availability in your area.
Jet, Inc. | |
750 Alpha Drive | |
Cleveland, OH 44143 | |
United States | |
440-461-2000 | |
Visit this company's website |
Facility : Cleveland, OH
Model Number | Rated Capacity Gallons/Day |
Classification | ||
J-500[1] [2] | 500 | Class I | ||
J-500PLT[3] | 500 | Class I | ||
J-600 | 600 | Class I | ||
J-750[4] | 750 | Class I | ||
J-750PLT[3] | 750 | Class I | ||
J-800[5] | 800 | Class I | ||
J-800PLT[3] | 800 | Class I | ||
J-1000 | 1000 | Class I | ||
J-1250 | 1250 | Class I | ||
J-1500 | 1500 | Class I | ||
[1] Model J-500 also as a component of the model J-500-P500. This complete model has not been tested by NSF. Complete model J-500-P500 includes a 500 gallon pump tank. [2] Model J-500 also as a component of the model J-500-P750. This complete model has not been tested by NSF. Complete model J-500-P750 includes a 750 gallon pump tank. [3] Suffix PLT denotes plastic tank design. [4] Model J-500 also as a component of the model J-750-P750. This complete model has not been tested by NSF. Complete model J-750-P750 includes a 750 gallon pump tank. [5] Model J-800 also as a component of the model J-800-P550 and J-800-P800. These complete models have not been tested by NSF. Complete model J-800-P550 includes a 550 gallon pump tank and J-800-P800 includes a 800 gallon pump tank. |
NOTE: This company may sell products complying with all applicable requirements for Certification nationally and internationally, but has advised NSF of authorized representatives physically located in the following: Alaska Arizona Arkansas California Colorado Florida Idaho Illinois Iowa Indiana Mississippi Missouri Montana New Jersey New York Ohio Pennsylvania Texas Virginia Washington West Virginia Wisconsin Wyoming Contact the Listed company directly for further product information and availability in your area.
Microseptec | |
23362 Madero | |
Suite C | |
Mission Viejo, CA 92691 | |
United States | |
949-297-4590 | |
Visit this company's website |
Facility : Mission Viejo, CA
Model Number | Rated Capacity Gallons/Day |
Classification | ||
EnviroServer ENFG 600 | 600 | Class I | ||
EnviroServer ES6-AP[1] | 600 | Class I | ||
EnviroServer ES6-P[2] | 600 | Class I | ||
EnviroServer ENFG 1200 | 1200 | Class I | ||
EnviroServer ES12-AP[1] | 1200 | Class I | ||
EnviroServer ES12-P[2] | 1200 | Class I | ||
EnviroServer ENFG 1500 | 1500 | Class I | ||
EnviroServer ES7.5-AP[1] | 750 | Class I | ||
EnviroServer ES7.5-P[2] | 750 | Class I | ||
EnviroServer ES9-AP[1] | 900 | Class I | ||
EnviroServer ES9-P[2] | 900 | Class I | ||
EnviroServer ES10.5-AP[1] | 1050 | Class I | ||
EnviroServer ES10.5-P[2] | 1050 | Class I | ||
EnviroServer ES13.5-AP[1] | 1350 | Class I | ||
EnviroServer ES13.5-P[2] | 1350 | Class I | ||
EnviroServer ES15-AP[1] | 1500 | Class I | ||
EnviroServer ES15-P[2] | 1500 | Class I | ||
[1] Suffix AP denotes airlift pump. [2] Suffix P denotes pump. |
National Wastewater Systems, Inc. | |
6754 Highway 90 East | |
Lake Charles, LA 70615 | |
United States | |
337-439-0680 |
Facility : Lake Charles, LA
Model Number | Rated Capacity Gallons/Day |
Classification | ||
SA II-1000 | 1000 | Class I | ||
SA II-500[2] [3] | 500 | Class I | ||
SA II-600[1] [7] | 600 | Class I | ||
SA II-750 | 750 | Class I | ||
SA II-800 | 800 | Class I | ||
Solar Air 1000 | 1000 | Class I | ||
Solar Air 1200 | 1200 | Class I | ||
Solar Air 500[4] | 500 | Class I | ||
Solar Air 500FRP[5] [6] | 500 | Class I | ||
Solar Air 800 | 800 | Class I | ||
[1] Model SA II-600 also as a component of the model SA II N-600 single tank system. Complete model SA II N-600 includes a 850 gallon pump tank in addition to the SA II-600. The pump tank was not tested and is not included as a component of the Certified model. [2] Model SA II-500 also as a component of the model SA II N-500 single tank system. Complete model SA II N-500 includes a 768 gallon pump tank in addition to the SA II-500. The pump tank was not tested and is not included as a component of the Certified model. [3] Model SA II 500 also as a component of the model SA II 500FRP, a fiberglass single tank system with an effluent pump tank. The pump tank was not tested and is not included as a component of the Certified Model. [4] Model Solar Air 500 also as a component of the Model SATXN-500 single tank system. Complete Model SATXN-500 includes a lift/pump tank in addition to the Solar Air 500. The lift/pump tank was not tested and is not included as a component of the Certified Model. [5] Model SA 500FRP also as a component of the SA 500FRP single tank system with effluent pump tank. The pump tank was not tested and is not included as a component of the Certified model. [6] Suffix FRP denotes a fiberglass reinforced plastic tank. [7] Model SA II-600 also as a component of the SA II-600 1000 spray, a single tank system with a 1000 gallon spray sewer unit. The spray tank was not tested and is not included as a component of the Certified model. |
NOTE: This company may sell products complying with all applicable requirements for Certification nationally and internationally, but has advised NSF of authorized representatives physically located in the following: Georgia Illinois Louisiana Mississippi Missouri Oklahoma Texas Contact the Listed company directly for further product information and availability in your area.
Norweco, Inc. | |
Firelands Industrial Park | |
220 Republic Street | |
Norwalk, OH 44857 | |
United States | |
419-668-4471 | |
Visit this company's website |
Facility : Norwalk, OH
Model Number | Rated Capacity Gallons/Day |
Classification | ||
Hydro-Kinetic 600 | 500 | Class I | ||
Hydro-Kinetic 600[1] | 600 | Class I | ||
Hydro-Kinetic 600 FEU | 500 | Class I | ||
Hydro-Kinetic Green 600 FEU | 600 | Class I | ||
Hydro-Kinetic 600 FEU | 600 | Class I | ||
Hydro-Kinetic 600 FEU LP[2] | 500 | Class I | ||
Hydro-Kinetic 600 FEU LP[2] | 600 | Class I | ||
Hydro-Kinetic 600 LP[2] | 500 | Class I | ||
Hydro-Kinetic 600 LP[2] | 600 | Class I | ||
Hydro-Kinetic 800 | 800 | Class I | ||
Hydro-Kinetic 800 LP[2] | 800 | Class I | ||
Hydro-Kinetic 800 FEU | 800 | Class I | ||
Hydro-Kinetic 800 FEU LP[2] | 800 | Class I | ||
Hydro-Kinetic 1000 | 1000 | Class I | ||
Hydro-Kinetic 1000 FEU | 1000 | Class I | ||
Hydro-Kinetic 1000 FEU LP[2] | 1000 | Class I | ||
Hydro-Kinetic 1000 LP[2] | 1000 | Class I | ||
Hydro-Kinetic 1200 FEU LP[2] | 1200 | Class I | ||
Hydro-Kinetic 1250 | 1250 | Class I | ||
Hydro-Kinetic 1250 FEU | 1250 | Class I | ||
Hydro-Kinetic 1250 LP[2] | 1250 | Class I | ||
Hydro-Kinetic 1500 | 1500 | Class I | ||
Hydro-Kinetic 1500 FEU | 1500 | Class I | ||
Hydro-Kinetic 1500 FEU LP[2] | 1500 | Class I | ||
Hydro-Kinetic 1500 LP[2] | 1500 | Class I | ||
Singulair 960-500GPD System[3] | 500 | Class I | ||
Singulair 960-500GPD System | 600 | Class I | ||
Singulair 960-750GPD System | 750 | Class I | ||
Singulair 960-750GPD System | 800 | Class I | ||
Singulair 960-1000GPD System | 1000 | Class I | ||
Singulair 960-1250GPD System | 1250 | Class I | ||
Singulair 960-1500GPD System | 1500 | Class I | ||
Singulair 960LP-500[2] | 500 | Class I | ||
Singulair 960LP-500[2] | 600 | Class I | ||
Singulair 960LP-750[2] | 750 | Class I | ||
Singulair 960LP-1000[2] | 1000 | Class I | ||
Singulair 960LP-1250[2] | 1250 | Class I | ||
Singulair 960LP-1500[2] | 1500 | Class I | ||
Singulair 960OP-500GPD System[4] | 500 | Class I | ||
Singulair 960OP-500GPD System[4] | 600 | Class I | ||
Singulair 960OP-1000GPD System[5] | 1000 | Class I | ||
Singulair Green 960-500 System | 500 | Class I | ||
Singulair Green 960-750 | 750 | Class I | ||
Singulair Green 960-500 System | 600 | Class I | ||
Singulair Green TNT-500 | 500 | Class I | ||
Singulair Green TNT-500 | 600 | Class I | ||
Singulair Green TNT-750 | 750 | Class I | ||
Singulair TNT-500 | 500 | Class I | ||
Singulair TNT-500 | 600 | Class I | ||
Singulair TNT-750 | 750 | Class I | ||
Singulair TNT-750 | 800 | Class I | ||
Singulair TNT-1000 | 1000 | Class I | ||
Singulair TNT-1250 | 1250 | Class I | ||
Singulair TNT-1500 | 1500 | Class I | ||
Singulair TNTLP-500[2] | 500 | Class I | ||
Singulair TNTLP-500[2] | 600 | Class I | ||
Singulair TNTLP-750[2] | 750 | Class I | ||
Singulair TNTLP-1000[2] | 1000 | Class I | ||
Singulair TNTLP-1250[2] | 1250 | Class I | ||
Singulair TNTLP-1500[2] | 1500 | Class I | ||
Singulair TNTOP-500[6] | 500 | Class I | ||
Singulair TNTOP-500[6] | 600 | Class I | ||
Singulair TNTOP-1000[6] | 1000 | Class I | ||
Singulair TNTOR-500[7] | 500 | Class I | ||
Singulair TNTOR-600[7] | 600 | Class I | ||
[1] Hydro-Kinetic 600 gpd system requires a minimum pretreatment tank size of 388 gallons. [2] Suffix LP denotes a low profile tank. [3] Singulair 960-500GPD System also a component of the Singulair Model 960-500 GPD with Effluent Pump Chamber. The pump chamber was not tested and is not included as a component of the Certified Model. [4] Singulair Model 9600P-500 with a rated capacity of 500 and 600 gallons per day is also a component of the Singulair Model 9600P-500 with effluent pump chamber. The pump chamber was not tested and is not included as a component of the Certified model. [5] Singulair Model 9600P-1000 with a rated capacity of 1000 gallons per day is also a component of the Singulair Model 9600P-1000 with effluent pump chamber. The pump chamber was not tested and is not included as a component of the Certified model. [6] Suffix OP denotes a one piece tank. [7] Suffix OR denotes Oregon model. |
NOTE: This company may sell products complying with all applicable requirements for Certification nationally and internationally, but has advised NSF of authorized representatives physically located in the following: Alberta Arkansas Arizona British Columbia California Colorado Florida Georgia Idaho Illinois Indiana Iowa Kansas Kentucky Louisiana Maryland Michigan Minnesota Mississippi Missouri Montana New Brunswick New Jersey New York North Carolina Ohio Oklahoma Ontario Pennsylvania Rhode Island Texas Vermont Virginia Washington West Virginia Wisconsin Contact the Listed Company directly for further product information and availability in your area.
Orenco Systems Inc. | |
814 Airway Avenue | |
Sutherlin, OR 97479 | |
United States | |
800-348-9843 | |
541-459-4449 | |
Visit this company's website |
Facility : Sutherlin, OR
Model Number | Rated Capacity Gallons/Day |
Classification |
AdvanTex AX20 | 500 | Class I |
AdvanTex AX20RT | 500 | Class I |
AdvanTex AX20RT-UV | 500 | Class I |
AdvanTex AX20 | 600 | Class I |
AdvanTex AX20RT | 600 | Class I |
AdvanTex AX20RT-UV | 600 | Class I |
AdvanTex AX25RT | 625 | Class I |
AdvanTex AX25RT-UV | 625 | Class I |
AdvanTex AX25RT | 750 | Class I |
AdvanTex AX25RT-UV | 750 | Class I |
AdvanTex AX20 | 1000 | Class I |
AdvanTex AX20RT | 1000 | Class I |
AdvanTex AX20-2 | 1000 | Class I |
AdvanTex AX20 | 1200 | Class I |
AdvanTex AX20RT 2 pod | 1200 | Class I |
AdvanTex AX25RT 2 pod | 1250 | Class I |
AdvanTex AX20 | 1500 | Class I |
AdvanTex AX20RT 3 pod | 1500 | Class I |
AdvanTex AX20-3 | 1500 | Class I |
AdvanTex AX25RT 2 pod | 1500 | Class I |
NOTE: This company may sell products complying with all applicable requirements for Certification nationally and internationally, but has advised NSF of authorized representatives physically located in the following: California Georgia Idaho New Jersey Ohio Oregon Pennsylvania Texas Contact the Listed company directly for further product information and availability in your area.
PC Biofilter, LLC | |
2480 Berkshire Parkway | |
Suite B | |
Clive, IA 50325 | |
United States | |
540-731-0207 | |
Visit this company's website |
Facility : Pulaski, VA
Model Number | Rated Capacity Gallons/Day |
Classification | ||
Planet Care Coir/Peat Biofilter |
||||
FXC/PBF 450 | 450 | Class I | ||
Planet Care Coir/Peat Biofilter[1] |
||||
FXC/PBFC450 | 450 | Class I | ||
FXC/PBFC600 | 600 | Class I | ||
FXC/PBFC750 | 750 | Class I | ||
FXC/PBFC900 | 900 | Class I | ||
[1] Suffix C denotes concrete tank. |
||||
Planet Care Peat Biofilter |
||||
FL400 | 400 | Class I | ||
FLC450 | 450 | Class I | ||
FLC600 | 600 | Class I | ||
FLC750 | 750 | Class I | ||
FLC900 | 900 | Class I |
Premier Tech Water and Environment Ltd. | |
1 avenue Premier | |
Rivière-du-Loup, QC G5R 6C1 | |
Canada | |
450-471-8444 | |
Visit this company's website |
Facility : Joliette, Québec, Canada
Model Number | Rated Capacity Gallons/Day |
Classification | ||
Ecoflo Coco Model Series Concrete Units (C)[1] [2] [3] [4] [5] |
||||
Ecoflo Coco EC5 ECC-XXX-O/G/P | 450 | Class I | ||
Ecoflo Coco EC5 ECC-XXX-O/G/P | 500 | Class I | ||
Ecoflo Coco EC5 ECC-XXX-O/G/P | 530 | Class I | ||
Ecoflo Coco EC5 ECC-XXX-O/G/P | 600 | Class I | ||
Ecoflo Coco EC5 ECC-XXX-O/G/P | 650 | Class I | ||
Ecoflo Coco EC5 ECC-XXX-O/G/P | 860 | Class I | ||
Ecoflo Coco EC7 EC7-XXX C-O/G/P | 500 | Class I | ||
Ecoflo Coco EC7 EC7-XXX C-O/G/P | 600 | Class I | ||
Ecoflo Coco EC7 EC7-XXX C-O/G/P | 700 | Class I | ||
Ecoflo Coco EC7 EC7-XXX C-O/G/P | 750 | Class I | ||
Ecoflo Coco EC7 EC7-XXX C-O/G/P | 800 | Class I | ||
Ecoflo Coco EC7 EC7-XXX C-O/G/P | 925 | Class I | ||
Ecoflo Coco EC7 EC7-XXX C-O/G/P | 1200 | Class I | ||
[1] Suffix XXX denotes the rated capacity. [2] Suffix G denotes Gravity discharge. [3] Concrete Units (C) Ecoflo Units - Size 2.8 3.4 3.8 4.0 4.5 5.0 6.5 Rated Capacity (gpd) Ecoflo ST/STB STB-yyy-B/BR 420 600 Ecoflo Coco EC5 ECC-XXX-O/G/P 450 500 530 600 650 860 Ecoflo Coco EC7 EC7-XXX C-O/G/P 500 600 700 750 800 925 1200 Ecoflo Coco ECDN ECDn-XXX C 500 600 600 700 750 1000 [4] Prefix and suffix C denotes a concrete vessel. [5] Suffix P: for EC5 and EC7 or R denote Pump discharge. |
||||
Ecoflo Coco Model Series Polyethylene Units (P)[1] [2] [5] [6] [7] [8] [9] |
||||
Ecoflo Coco EC5 ECP-XXX-O/G/P (pack)* | 450 | Class I | ||
Ecoflo Coco EC5 ECP-XXX-O/G/P (pack)* | 530 | Class I | ||
Ecoflo Coco EC5 ECP-XXX-O/G/P (pack)* | 750 | Class I | ||
Ecoflo Coco EC5 ECP-XXX-O/G/P (pack)* | 860 | Class I | ||
Ecoflo Coco EC5 ECP-XXX-O/G/P (pack)* | 970 | Class I | ||
EcoFlo Coco EC7-XXX P-O/G/P (pack)* | 500 | Class I | ||
EcoFlo Coco EC7-XXX P-O/G/P (pack)* | 600 | Class I | ||
EcoFlo Coco EC7-XXX P-O/G/P (pack)* | 750 | Class I | ||
EcoFlo Coco EC7-XXX P-O/G/P (pack)* | 1050 | Class I | ||
EcoFlo Coco EC7-XXX P-O/G/P (pack)* | 1200 | Class I | ||
EcoFlo Coco EC7-XXX P-O/G/P (pack)* | 1350 | Class I | ||
[1] Suffix XXX denotes the rated capacity. [2] Suffix G denotes Gravity discharge. [5] Suffix P: for EC5 and EC7 or R denote Pump discharge. [6] Prefix P denotes for EC5 a polyethylene vessel. [7] Suffix P denotes a polyethylene vessel. [8] *pack - Monobloc configuration. Available only for 2.8, 3.4 and 4.1 Ecoflo Coco units. [9] Polyethylene Units (P) Ecoflo Units - Size 2.8 3.4 4.1 5.7 6.5 7.3 Rated Capacity (gpd) Ecoflo ST/STB ST/STB-yyy-P/PR 530 600 675 Ecoflo Coco EC5 ECP-XXX-O/G/P (pack)* 450 530 750 860 970 Ecoflo Coco EC7 EC7-XXX P-O/G/P (pack)* 500 600 750 1050 1200 1350 Ecoflo Coco ECDN ECDn-XXX P 500 600 865 1000 1100 |
||||
Ecoflo Coco ECDN Model Series Concrete Units (C)[1] [3] [4] |
||||
Ecoflo Coco ECDn-XXX C | 500 | Class I | ||
Ecoflo Coco ECDn-XXX C | 600 | Class I | ||
Ecoflo Coco ECDn-XXX C | 600 | Class I | ||
Ecoflo Coco ECDn-XXX C | 700 | Class I | ||
Ecoflo Coco ECDn-XXX C | 750 | Class I | ||
Ecoflo Coco ECDn-XXX C | 1000 | Class I | ||
[1] Suffix XXX denotes the rated capacity. [3] Concrete Units (C) Ecoflo Units - Size 2.8 3.4 3.8 4.0 4.5 5.0 6.5 Rated Capacity (gpd) Ecoflo ST/STB STB-yyy-B/BR 420 600 Ecoflo Coco EC5 ECC-XXX-O/G/P 450 500 530 600 650 860 Ecoflo Coco EC7 EC7-XXX C-O/G/P 500 600 700 750 800 925 1200 Ecoflo Coco ECDN ECDn-XXX C 500 600 600 700 750 1000 [4] Prefix and suffix C denotes a concrete vessel. |
||||
Ecoflo Coco ECDN Model Series Polyethylene Units (P)[1] [7] [9] |
||||
Ecoflo Coco ECDn-XXX P | 500 | Class I | ||
Ecoflo Coco ECDn-XXX P | 600 | Class I | ||
Ecoflo Coco ECDn-XXX P | 865 | Class I | ||
Ecoflo Coco ECDn-XXX P | 1000 | Class I | ||
Ecoflo Coco ECDn-XXX P | 1100 | Class I | ||
[1] Suffix XXX denotes the rated capacity. [7] Suffix P denotes a polyethylene vessel. [9] Polyethylene Units (P) Ecoflo Units - Size 2.8 3.4 4.1 5.7 6.5 7.3 Rated Capacity (gpd) Ecoflo ST/STB ST/STB-yyy-P/PR 530 600 675 Ecoflo Coco EC5 ECP-XXX-O/G/P (pack)* 450 530 750 860 970 Ecoflo Coco EC7 EC7-XXX P-O/G/P (pack)* 500 600 750 1050 1200 1350 Ecoflo Coco ECDN ECDn-XXX P 500 600 865 1000 1100 |
||||
Ecoflo Coco Model Series Fiberglass Units[1] [10] [11] [12] |
||||
Ecoflo Coco EC5 ECF-XXX-O | 650 | Class I | ||
Ecoflo Coco EC5 ECF-XXX-O | 860 | Class I | ||
Ecoflo Coco EC5 ECF-XXX-O | 1000 | Class I | ||
Ecoflo Coco EC7 EC7-XXX F | 925 | Class I | ||
Ecoflo Coco EC7 EC7-XXX F | 1200 | Class I | ||
Ecoflo Coco EC7 EC7-XXX F | 1400 | Class I | ||
[1] Suffix XXX denotes the rated capacity. [10] Prefix and Suffix F denotes a fiberglass vessel. [11] Fiberglass Units (F) Ecoflo Units - Size 5.0 6.5 7.5 Rated Capacity (gpd) Ecoflo ST/STB ST-yyy 420 600 695 Ecoflo Coco EC5 ECF-XXX-O 650 860 1000 Ecoflo Coco EC7 EC7-XXX F 925 1200 1400 [12] Prefix ST or Suffix O denotes Open bottom systems. |
||||
Ecoflo ST Model Series Fiberglass Units[11] [12] [13] |
||||
EcoFlo ST-yyy | 420 | Class I | ||
EcoFlo ST-yyy | 600 | Class I | ||
EcoFlo ST-yyy | 695 | Class I | ||
[11] Fiberglass Units (F) Ecoflo Units - Size 5.0 6.5 7.5 Rated Capacity (gpd) Ecoflo ST/STB ST-yyy 420 600 695 Ecoflo Coco EC5 ECF-XXX-O 650 860 1000 Ecoflo Coco EC7 EC7-XXX F 925 1200 1400 [12] Prefix ST or Suffix O denotes Open bottom systems. [13] Suffix yyy relates to the Ecoflo size (in 3 digit format without decimal). |
||||
Ecoflo ST/STB Model Series Concrete Units (C)[13] [14] [15] |
||||
Ecoflo STB-yyy-B/BR | 420 | Class I | ||
Ecoflo STB-yyy-B/BR | 600 | Class I | ||
[13] Suffix yyy relates to the Ecoflo size (in 3 digit format without decimal). [14] Prefix STB denotes close bottom, gravity discharge. [15] Suffix B denotes also a concrete vessel. |
||||
Ecoflo ST/STB Model Series Polyethylene Units (P)[5] [7] [9] [12] [13] [14] |
||||
Ecoflo ST/STB-yyy-P/PR | 530 | Class I | ||
Ecoflo ST/STB-yyy-P/PR | 675 | Class I | ||
Ecoflo ST/STB-yyy-P/PR | 600 | Class I | ||
[5] Suffix P: for EC5 and EC7 or R denote Pump discharge. [7] Suffix P denotes a polyethylene vessel. [9] Polyethylene Units (P) Ecoflo Units - Size 2.8 3.4 4.1 5.7 6.5 7.3 Rated Capacity (gpd) Ecoflo ST/STB ST/STB-yyy-P/PR 530 600 675 Ecoflo Coco EC5 ECP-XXX-O/G/P (pack)* 450 530 750 860 970 Ecoflo Coco EC7 EC7-XXX P-O/G/P (pack)* 500 600 750 1050 1200 1350 Ecoflo Coco ECDN ECDn-XXX P 500 600 865 1000 1100 [12] Prefix ST or Suffix O denotes Open bottom systems. [13] Suffix yyy relates to the Ecoflo size (in 3 digit format without decimal). [14] Prefix STB denotes close bottom, gravity discharge. |
||||
Ecoflo® Linear Biofilter Model Series [16] [17] [18] [19] [20] |
||||
EL15-054-YY | 1430 | Class I | ||
EL15-049-YY | 1290 | Class I | ||
EL15-019-YY | 500 | Class I | ||
EL15-028-YY | 740 | Class I | ||
EL15-032-YY | 840 | Class I | ||
EL15-052-YY | 1370 | Class I | ||
EL15-030-YY | 790 | Class I | ||
EL15-034-YY | 900 | Class I | ||
EL15-017-YY | 450 | Class I | ||
EL15-024-YY | 630 | Class I | ||
EL15-026-YY | 690 | Class I | ||
EL15-022-YY | 580 | Class I | ||
EL15-041-YY | 1080 | Class I | ||
EL15-023-YY | 610 | Class I | ||
EL15-031-YY | 820 | Class I | ||
EL15-020-YY | 530 | Class I | ||
EL15-033-YY | 870 | Class I | ||
EL15-043-YY | 1130 | Class I | ||
EL15-025-YY | 660 | Class I | ||
EL15-051-YY | 1350 | Class I | ||
EL15-039-YY | 1030 | Class I | ||
EL15-046-YY | 1210 | Class I | ||
EL15-027-YY | 710 | Class I | ||
EL15-016-YY | 420 | Class I | ||
EL15-053-YY | 1400 | Class I | ||
EL15-029-YY | 770 | Class I | ||
EL15-037-YY | 980 | Class I | ||
EL15-048-YY | 1270 | Class I | ||
EL15-018-YY | 480 | Class I | ||
EL15-057-YY | 1500 | Class I | ||
EL15-036-YY | 950 | Class I | ||
EL15-038-YY | 1000 | Class I | ||
EL15-040-YY | 1060 | Class I | ||
EL15-044-YY | 1160 | Class I | ||
EL15-035-YY | 920 | Class I | ||
EL15-021-YY | 550 | Class I | ||
EL15-045-YY | 1190 | Class I | ||
EL15-015-YY | 400 | Class I | ||
EL15-042-YY | 1100 | Class I | ||
EL15-056-YY | 1480 | Class I | ||
EL15-050-YY | 1320 | Class I | ||
EL15-055-YY | 1450 | Class I | ||
EL15-047-YY | 1240 | Class I | ||
[16] Suffix YY refers to combined treatment and dispersal (CD) or single point discharge (SD). For trade name EL15-XXX-YY, the XXX indicates the number of modules in the system. [17] Minimum requirement of 6 inches of sand below the Ecoflo Linear Biofilter. These products are approved for use with sand media that conforms to the following specifications: D10: 0.150 to 0.600 mm (Mesh 100 to 30) D60: 0.500 to 2.000 mm (Mesh 35 to 10) Uc: 2-6 Less than 5% fines (<0.075 mm – Mesh 200) Less than 20% coarse (>4.760 mm – Mesh 4) [18] Table A, Minimum Sizing and Dimensions NSF 40 Class I Certified Ecoflo® Linear Biofilter EL15 Model Series Model Rated Capacity Minimum Tank Size (gallons per day) (gallon) EL15-015-YY 400 750 EL15-016-YY 420 790 EL15-017-YY 450 840 EL15-018-YY 480 900 EL15-019-YY 500 940 EL15-020-YY 530 990 EL15-021-YY 550 1030 EL15-022-YY 580 1090 EL15-023-YY 610 1140 EL15-024-YY 630 1180 EL15-025-YY 660 1240 EL15-026-YY 690 1290 EL15-027-YY 710 1330 EL15-028-YY 740 1390 EL15-029-YY 770 1440 EL15-030-YY 790 1480 EL15-031-YY 820 1540 EL15-032-YY 840 1580 EL15-033-YY 870 1630 EL15-034-YY 900 1690 EL15-035-YY 920 1730 EL15-036-YY 950 1780 EL15-037-YY 980 1840 EL15-038-YY 1000 1880 EL15-039-YY 1030 1930 EL15-040-YY 1060 1990 EL15-041-YY 1080 2030 EL15-042-YY 1100 2080 EL15-043-YY 1130 2120 EL15-044-YY 1160 2180 EL15-045-YY 1190 2230 EL15-046-YY 1210 2270 EL15-047-YY 1240 2330 EL15-048-YY 1270 2380 EL15-049-YY 1290 2420 EL15-050-YY 1320 2480 EL15-051-YY 1350 2530 EL15-052-YY 1370 2570 EL15-053-YY 1400 2630 EL15-054-YY 1430 2680 EL15-055-YY 1450 2720 EL15-056-YY 1480 2780 EL15-057-YY 1500 2810 [19] The Ecoflo Linear Biofilter EL15 Series can be installed in a bed or trench configurations. The sand layer's minimal height shall be 6 inches. A trench configuration requires a minimum width of 34 inches. [20] Certified for use with a septic/primary tank, an effluent filter, a distribution box, and a Polylock Filter Alarm System. |
NOTE: Only products bearing the NSF Mark on the product are Certified.
Pro Flo Aerobic Systems, LP | |
20222 FM 362 North | |
Waller, TX 77484 | |
United States | |
936-372-5222 | |
Visit this company's website |
Facility : Waller, TX
Model Number | Rated Capacity Gallons/Day |
Classification | ||
Flow-Rite 500 | 500 | Class I | ||
Pro Flo 500 HC[1] [2] | 500 | Class I | ||
Pro Flo 500 SL[3] | 500 | Class I | ||
Pro Flo 500 SL2[4] | 500 | Class I | ||
Pro Flo 500 SLPT2M[5] | 500 | Class I | ||
Pro Flo 500 SLPT8[6] | 500 | Class I | ||
Pro Flo 500 TL[7] | 500 | Class I | ||
Pro Flo 5060 HC[8] | 600 | Class I | ||
Pro Flo 500 HC | 500 | Class I | ||
Pro Flo 600 HC[1] [9] | 600 | Class I | ||
Pro Flo 600 SL[10] [11] | 600 | Class I | ||
Flow-Rite 750 | 750 | Class I | ||
Pro Flo 750 PTSL | 750 | Class I | ||
Pro Flo 750 PTSL2M | 750 | Class I | ||
Pro Flo 750 SL | 750 | Class I | ||
Pro Flo 750 SL2 | 750 | Class I | ||
Pro Flo 750 TL | 750 | Class I | ||
Pro Flo 800 HC[1] [12] | 800 | Class I | ||
Pro Flo 800 PTSL | 800 | Class I | ||
Pro Flo 800 SL | 800 | Class I | ||
Flow-Rite 1000 | 1000 | Class I | ||
Pro Flo 1000 HC | 1000 | Class I | ||
Pro Flo 1000S | 1000 | Class I | ||
Pro Flo 1500 HC | 1500 | Class I | ||
Pro Flo 1500S | 1500 | Class I | ||
[1] Suffix S denotes attached pretreatment tank. Suffix P denotes attached pump tank. Suffix SP denotes attached pretreatment tank and pump tank. Suffix SL denotes tapered tank. Suffix SL2 denotes pretreat tank, not attached. [2] Pro Flo 500 HC System also as a component of the Pro Flo 500 HCP, Pro Flo 500 HCS, and Pro Flo 500 HCSP, which have a 400 gallon pretreatment tank and a 770 gallon pump tank. The pretreatment tank and pump tank were not tested and are not included as components of the Certified models. [3] Pro Flo 500 SL System also as a component of the Pro Flo 500 SLPT with Effluent Pump Chamber. The pump chamber was not tested and is not included as a component of the Certified model. [4] Pro Flo 500 SL2 System also as a component of the Pro Flo 500 SLPT2 with Effluent Pump Chamber. The pump chamber was not tested and is not included as a component of the Certified model. [5] Pro Flo 500 SLPT2M has an attached 750 gallon pump tank. The pump chamber was not tested and is not included as a component of the Certified model. [6] Pro Flo 500 SLPT8 has an attached 800 gallon pump tank. The pump chamber was not tested and is not included as a component of the Certified model. [7] Pro Flo 500 TL System also as a component of the Pro Flo SLPT5, which has a 500 gallon pump tank. The pump chamber was not tested and is not included as a component of the Certified model. [8] Pro Flo 5060 HC System also as a component of the Pro Flo 5060 HCP, 5060 HCS, and 5060 HCSP, which have a 400 gallon pretreatment tank and a 800 gallon pump tank. The pretreatment tank and pump tank were not tested and are not included as components of the Certified models. [9] Pro Flo 600 HC System also as a component of the Pro Flo 600 HCP, Pro Flo 600 HCS, and Pro Flo 600 HCSP, which have a 450 gallon pretreatment tank and a 800 gallon pump tank. The pretreatment tank and pump tank were not tested and are not included as components of the Certified models. [10] Pro Flo 600 SL System also as a component of the Pro Flo 500 TL. The pump chamber was not tested and is not included as a component of the Certified model. [11] Pro Flo 600 SL System also as a component of the Pro Flo 600 SLPT with Effluent Pump Chamber. The pump chamber was not tested and is not included as a component of the Certified model. [12] Pro Flo 800 HC System also as a component of the Pro Flo 800 HCS, which has a 800 gallon pump tank. The pump tank was not tested and is not included as components of the Certified models. |
NOTE: This company may sell products complying with all applicable requirements for Certification nationally and internationally, but has advised NSF of authorized representatives physically located in the following: Alberta Oklahoma Texas Contact the Listed company directly for further product information and availability in your area.
SeptiTech® | |
69 Holland Street | |
Lewiston, ME 04240 | |
United States | |
800-318-7967 | |
207-333-6940 | |
Visit this company's website |
Facility : Lewiston, ME
Model Number | Rated Capacity Gallons/Day |
Classification |
STAAR™ 0.5 | 500 | Class I |
STAAR™ 0.75 | 750 | Class I |
STAAR™ 1.0 | 1000 | Class I |
STAAR™ 1.2 | 1200 | Class I |
STAAR™ 1.5 | 1500 | Class I |
NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or documentation shipped with the product are Certified. NOTE: This company may sell products complying with all applicable requirements for Certification nationally and internationally, but has advised NSF of authorized representatives physically located in the following: Arizona California Connecticut Maine Maryland Massachusetts New Hampshire North Carolina Ohio Rhode Island Vermont Washington West Virginia Contact the Listed company directly for further product information and availability in your area.
SludgeHammer Group Ltd. | |
4772 US 131 South | |
Building D | |
Petoskey, MI 49770 | |
United States | |
231-348-5866 |
Facility : Petoskey, MI
Model Number | Rated Capacity Gallons/Day |
Classification |
S-1000 | 1000 | Class I |
S-400 | 400 | Class I |
S-600 | 600 | Class I |
S-800 | 800 | Class I |
Stallion Infrastructure Services, Ltd. | |
950 Corbindale | |
Suite 400 | |
Houston, TX 77024 | |
United States | |
701-300-4751 | |
Visit this company's website |
Facility : Port of Vermillion, LA
Model Number | Rated Capacity Gallons/Day |
Classification |
StaRT | 1000 | Class II |
TuffTiger, LLC | |
8413 Parker Road | |
Houston, TX 77078 | |
United States | |
866-770-7785 | |
713-633-0058 | |
Visit this company's website |
Facility : Houston, TX
Model Number | Rated Capacity Gallons/Day |
Classification | ||
T-500 | 500 | Class I | ||
T-558[1] | 500 | Class I | ||
T-600 | 600 | Class I | ||
T-750 | 750 | Class I | ||
T-1000 | 1000 | Class I | ||
T-1500 | 1500 | Class I | ||
T-500F[2] | 500 | Class I | ||
T-600F | 600 | Class I | ||
T-750F | 750 | Class I | ||
T-1000F | 1000 | Class I | ||
T-1500F | 1500 | Class I | ||
[1] TuffTiger T-558 includes a 485 gallon pretreatment tank. [2] Suffix F denotes a fiberglass tank. |
NOTE: This company may sell products complying with all applicable requirements for Certification nationally and internationally, but has advised NSF of authorized representatives physically located in the following: Texas
Number of matching Manufacturers is 36
Number of matching Products is 770
Processing time was 1 seconds