NSF Product and Service Listings

These NSF Official Listings are current as of Saturday, December 21, 2024 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.

Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/fire_safety/Listings.asp?

NSF/ANSI 14
Plastics Piping System Components and Related Materials

Click here for a list of End Use Code Designations.

Click on Product Standards or footnote in blue to view the referenced document

Atkore Plastic Pipe Corporation
16100 South Lanthrop Avenue
Harvey, IL 60426
United States
708-225-2075

Facility : Tampa, FL

Fire Main - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe+ [G]	PVC	Heritage Plastics	UL 1285
8" DR DR 14, DR 18, DR 25
6" DR DR 14, DR 18, DR 25
10" DR DR 14, DR 18, DR 25
4" DR DR 14, DR 18, DR 25
12" DR DR 14, DR 18, DR 25
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.

Facility : Eugene, OR

Fire Main - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe+ [G]	PVC	Heritage Plastics	UL 1285
4" DR 14, 18, 25
6" DR 14, 18, 25
8" DR 14, 18, 25
10" DR 14, 18, 25
12" DR 14, 18, 25
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.

Bow Plumbing Group, Inc.
5700 Cote de Liesse
Montreal, QC H4T 1B1
Canada
450-372-5481
Visit this company's website

Facility : # 2 Granby, Quebec, Canada

Surface Burning Characteristics of Building Materials

Product Type	Material Type	Trade Name	Product Standard
Tubing# [1]	PEX	Bowpex	ASTM E84
1/2" (without insulation)
# Certified Bowpex tubing is natural, red, blue or white. [1] Flame Spread Index <=25, Smoke Developed Index <=50. Flame Spread Index and Smoke Developed Index for ASTM E84 is based on minimum spacing of 18 inches between tubing runs. Tubing shall be marked [cNSFus® fs ASTM E84 ULC S102.2 FS25/SD50].
Tubing# ¢ [2]	PEX	Bowpex	CAN/ULC S102.2
1/2" (without insulation)
# Certified Bowpex tubing is natural, red, blue or white. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. [2] Flame Spread Value <=25, Smoke Developed Value <=50. Tubing shall be marked [cNSFus® fs ASTM E84 ULC S102.2 FS25/SD50].
Tubing# ¢ [3]	PEX	Bowpex	CAN/ULC S102.2
1/8", 1/4", 3/8", 3/4", 1" (with insulation)
# Certified Bowpex tubing is natural, red, blue or white. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. [3] Flame Spread Value <=25, Smoke Developed Value <=50. The Flame Spread Value and Smoke Developed Value is based on when tubing is field insulated with 1/2" JM Microlok HP Hi performance fiberglass insulation as per Bow installation instructions. Tubing shall be marked [cNSF®-fs ULCS102.2 FS25/SD50].
Tubing$ [1]	PE-RT 4710	Enviro EXP	ASTM E84
1/2" (without insulation)
$ Certified Enviro EXP is coextruded natural tubing with a red, blue, or clear outer layer. [1] Flame Spread Index <=25, Smoke Developed Index <=50. Flame Spread Index and Smoke Developed Index for ASTM E84 is based on minimum spacing of 18 inches between tubing runs. Tubing shall be marked [cNSFus® fs ASTM E84 ULC S102.2 FS25/SD50].
Tubing$ ¢ [2]	PE-RT 4710	Enviro EXP	CAN/ULC S102.2
1/2" (without insulation)
$ Certified Enviro EXP is coextruded natural tubing with a red, blue, or clear outer layer. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. [2] Flame Spread Value <=25, Smoke Developed Value <=50. Tubing shall be marked [cNSFus® fs ASTM E84 ULC S102.2 FS25/SD50].
Tubing$ ¢ [3]	PE-RT 4710	Enviro EXP	CAN/ULC S102.2
3/4" (without insulation)
$ Certified Enviro EXP is coextruded natural tubing with a red, blue, or clear outer layer. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. [3] Flame Spread Value <=25, Smoke Developed Value <=50. The Flame Spread Value and Smoke Developed Value is based on when tubing is field insulated with 1/2" JM Microlok HP Hi performance fiberglass insulation as per Bow installation instructions. Tubing shall be marked [cNSF®-fs ULCS102.2 FS25/SD50].
Tubing% [1]	PEX	Oxypex	ASTM E84
1/2" (without insulation)
% Certified Oxypex tubing has a red outer layer. [1] Flame Spread Index <=25, Smoke Developed Index <=50. Flame Spread Index and Smoke Developed Index for ASTM E84 is based on minimum spacing of 18 inches between tubing runs. Tubing shall be marked [cNSFus® fs ASTM E84 ULC S102.2 FS25/SD50].
Tubing% ¢ [2]	PEX	Oxypex	CAN/ULC S102.2
1/2" (without insulation)
% Certified Oxypex tubing has a red outer layer. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. [2] Flame Spread Value <=25, Smoke Developed Value <=50. Tubing shall be marked [cNSFus® fs ASTM E84 ULC S102.2 FS25/SD50].
Tubing% ¢ [3]	PEX	Oxypex	CAN/ULC S102.2
1/4", 3/8", 5/8", 3/4", 1" (with insulation)
% Certified Oxypex tubing has a red outer layer. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. [3] Flame Spread Value <=25, Smoke Developed Value <=50. The Flame Spread Value and Smoke Developed Value is based on when tubing is field insulated with 1/2" JM Microlok HP Hi performance fiberglass insulation as per Bow installation instructions. Tubing shall be marked [cNSF®-fs ULCS102.2 FS25/SD50].
Tubing@ [1]	PEX	Superpex	ASTM E84
1/2" (without insulation)
@ Certified Bow Superpex tubing has a blue, red, or white outer layer. [1] Flame Spread Index <=25, Smoke Developed Index <=50. Flame Spread Index and Smoke Developed Index for ASTM E84 is based on minimum spacing of 18 inches between tubing runs. Tubing shall be marked [cNSFus® fs ASTM E84 ULC S102.2 FS25/SD50].
Tubing@ ¢ [2]	PEX	Superpex	CAN/ULC S102.2
1/2" (without insulation)
@ Certified Bow Superpex tubing has a blue, red, or white outer layer. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. [2] Flame Spread Value <=25, Smoke Developed Value <=50. Tubing shall be marked [cNSFus® fs ASTM E84 ULC S102.2 FS25/SD50].
Tubing@ ¢ [3]	PEX	Superpex	CAN/ULC S102.2
1/4", 3/8", 3/4", 1" (with insulation)
@ Certified Bow Superpex tubing has a blue, red, or white outer layer. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. [3] Flame Spread Value <=25, Smoke Developed Value <=50. The Flame Spread Value and Smoke Developed Value is based on when tubing is field insulated with 1/2" JM Microlok HP Hi performance fiberglass insulation as per Bow installation instructions. Tubing shall be marked [cNSF®-fs ULCS102.2 FS25/SD50].

Diamond Plastics Corporation
1212 Johnstown Road
Grand Island, NE 68803
United States
308-384-4400

Facility : Casa Grande, AZ

Fire Main - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe+	PVC	DPC Pipe/ Diamond	FM 1612
PC 250: 4", 6", 8", 10", 12" DR 14
PC 185: 4", 6", 8", 10", 12" DR 18
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
Pipe+	PVC	DPC Pipe/ Diamond	UL 1285
PC 165: 4",6",8",10",12",14",16",18",20",24"
PC 165: 30", 36"
PC 235: 4", 6", 8", 10", 12", 14", 16", 18", 20"
PC 235: 24", 30", 36"
PC 305: 4",6",8",10",12",14",16",18",20",24",30"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.

Facility : Macon, GA

Fire Main - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe+	PVC	DPC Pipe/ Diamond	AWWA C900
4", 6", 8", 10", 12", 14", 16", 18", 20", 24", 30"
36", 42", 48"
PC305 (DR14) in nominal diameters of 4" - 30"
PC235 (DR18) in nominal diameters of 4" - 42"
PC200 (DR-21) in diameters 14" - 48"
PC165 (DR25) in diameters 4" - 60"
PC125 (DR32.5) in diameters 16" - 60"
PC100 (DR41) in diameters 20" - 60"
PC80 (DR51) in diameters 24" - 60"
PC50 (DR81) in diameters 36" - 60"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
Pipe+	PVC	DPC Pipe/ Diamond	FM 1612
PC 250: 4", 6", 8", 10", 12" DR 14
PC 185: 4", 6", 8", 10", 12" DR 18
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
Pipe+	PVC	DPC Pipe/ Diamond	UL 1285
PC 165: 4",6",8",10",12",14",16",18",20",24"
PC 165: 30", 36", 42"
PC 235: 4", 6", 8", 10", 12", 14", 16", 18", 20"
PC 235: 24", 30", 36", 42"
PC 305: 4",6",8",10",12",14",16",18",20"
PC 305: 24", 30", 36"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.

Facility : Muncie, IN

Fire Main - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe +	PVC	DPC Pipe/ Diamond	FM 1612
PC 250: 4", 6", 8", 10", 12" DR 14
PC 185: 4", 6", 8", 10", 12" DR 18
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
Pipe +	PVC	DPC Pipe/ Diamond	UL 1285
PC 165: 4", 6", 8", 10", 12", 14", 16", 18", 20"
PC 165: 24", 30"
PC 165: 38", 40", 42"
PC 235: 4", 6", 8", 10", 12", 14", 16", 18", 20"
PC 235: 24", 30"
PC 305: 4",6",8",10",12",14",16",18",20",24",30"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.

* Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.

Facility : Plaquemine, LA

Fire Main - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe +	PVC	DPC Pipe/ Diamond	FM 1612
PC 250: 4", 6", 8", 10", 12" DR 14
PC 185: 4", 6", 8", 10", 12" DR 18
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
Pipe+	PVC	DPC Pipe/ Diamond	UL 1285
PC 165: 4",6",8",10",12",14",16",18",20",24"
PC 165: 30"
PC 235: 4", 6", 8", 10", 12", 14", 16", 18", 20"
PC 235: 24", 30"
PC 305: 4",6",8",10",12",14",16",18",20",24",30"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.

Facility : Grand Island, NE

Fire Main - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe+	PVC	DPC Pipe/ Diamond	AWWA C900
4", 6", 8", 10", 12", 14", 16", 18", 20", 24", 30"
36", 42", 48", 54", 60"
PC305 (DR14) in nominal diameters of 4" - 30"
PC235 (DR18) in nominal diameters of 4" - 42"
PC200 (DR-21) in diameters 14" - 48"
PC165 (DR25) in diameters 4" - 60"
PC125 (DR32.5) in diameters 16" - 60"
PC100 (DR41) in diameters 20" - 60"
PC80 (DR51) in diameters 24" - 60"
PC50 (DR81) in diameters 36" - 60"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
Pipe+	PVC	DPC Pipe/ Diamond/ Diamon Lok-21	FM 1612
PC 250: 4", 6", 8", 10", 12" DR 14
PC 185: 4", 6", 8", 10", 12" DR 18
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
Pipe+	PVC	DPC Pipe/ Diamond	UL 1285
PC 165: 4",6",8",10",12",14",16",18",20",24"
PC 165: 30", 36"
PC 235: 4", 6", 8", 10", 12", 14", 16", 18", 20"
PC 235: 24", 30", 36", 42"
PC 305: 4",6",8",10",12",14",16",18",20"
PC 305: 24", 30", 36"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.

Facility : Golconda, NV

Fire Main - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe+	PVC	DPC Pipe/ Diamond	FM 1612
PC 250: 4", 6", 8", 10", 12" DR 14
PC 185: 4", 6", 8", 10", 12" DR 18
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
Pipe+	PVC	DPC Pipe/ Diamond	UL 1285
PC 165: 4",6",8",10",12",14",16",18",20",24"
PC 165: 30", 36", 42"
PC 235: 4", 6", 8", 10", 12", 14", 16", 18", 20"
PC 235: 24", 30", 36", 42"
PC 305: 4",6",8",10",12",14",16",18",20"
PC 305: 24", 30", 36"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.

Facility : Lubbock, TX

Fire Main - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe+	PVC	DPC Pipe/ Diamond/ Diamond Lok-21	FM 1612
PC 250: 4", 6", 8", 10", 12" DR 14
PC 185: 4", 6", 8", 10", 12" DR 18
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
Pipe+	PVC	DPC Pipe/ Diamond	UL 1285
PC 165: 4",6",8",10",12",14",16",18",20",24"
PC 165: 30", 36"
PC 235: 4", 6", 8", 10", 12", 14", 16", 18", 20"
PC 235: 24", 30", 36"
PC 305: 4",6",8",10",12",14",16",18",20"
PC 305: 24", 30", 36"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.

Empresa Mexicana de Manufacturas S.A. de C.V. DBA EMMSA
AV Pedro Ramirez Vazquez Numero Exterior
200-13 Numero Interior Piso 5 Colonia
Valle Oriente, San Pedro Garza Garcia
Nuevo Léon 66269,
Mexico
52 818 088 7495
Visit this company's website

Facility : Garcia, Nuevo Leon, Mexico

Fire Main - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe# + [G]	PVC	EMMSA	FM 1612
4" SDR 14, 18
6" SDR 14, 18
8" SDR 14, 18
10" SDR 14, 18
12" SDR 14, 18
# This product may be marked with an alternate trade name: CRESCO; [CRESCO logo] or Durafort by CRESCO and/or [Durafort by CESCO logo]. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe# + [G]	PVC	EMMSA	UL 1285
4" SDR 14, 18, 25
6" SDR 14, 18, 25
8" SDR 14, 18, 25
10" SDR 14, 18, 25
12" SDR 14, 18, 25
# This product may be marked with an alternate trade name: CRESCO; [CRESCO logo] or Durafort by CRESCO and/or [Durafort by CESCO logo]. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.

Everhot Inc.
5407 Foster Avenue
Brooklyn, NY 11234
United States
347-492-7660

Facility : # 1 China

Surface Burning Characteristics of Building Materials

Product Type	Material Type	Trade Name	Product Standard
Tubing# $ *	PEX	Everhot	ASTM E84
3/8", 1/2" - 2"
Flame Spread Index <= 25	Smoke Developed Index <= 50
# The Flame Spread Index and Smoke Developed Index for 1/2"-2" tubing are based on when tubing is field insulated with 1/2" JM Microlok HP Hi performance fiberglass insulation as per RIFENG installation instructions. The 3/8" tubing is not insulated. $ Certified for blue, natural, red, and white without oxygen barrier. * Flame Spread Index and Smoke Developed Index based on minimum spacing of 18 inches between tubing runs. Tubing shall be marked [NSF®-fs ASTM E84 FS<=25/SD<=50].
Tubing$ &	PEX	Everhot	CAN/ULC S102.2
3/8", 1/2" - 2"
Flame Spread Rating <= 25	Smoke Developed Classification <= 50
$ Certified for blue, natural, red, and white without oxygen barrier. & 3/8" tubing (without insulation) shall be marked [cNSF®-fs ULc S102.2 FS <=25/SD <=50]. 1/2" - 2" tubing (with insulation), Flame Spread Index and Smoke Developed Index based on when the tubing is field insulated with JM Microlok HP Hi Performance Fiberglass insulation as per the pipe manufacturer's installation instructions. Tubing shall be Marked [cNSF®-fs ULc S102.2 FS<=25/SD<=50].

Heatlink Group INC.
11500 - Stonehill Drive NE
#115
Calgary, AB T3N 2M7
Canada
403-717-3820

Facility : P3 USA

Surface Burning Characteristics of Building Materials

Product Type	Material Type	Trade Name	Product Standard
Tubing^ § **	PEX	PureLink Plus	ASTM E84
1/2", 3/4"
^ Flame Spread Index <= 25, Smoke Developed Index <= 50 § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. ** Flame Spread Index and Smoke Developed Index based on minimum spacing of 18 inches between tubing runs. Tubing shall be marked [NSF®-fs ASTM E84 FS<=25/SD<=50].
Tubing^ § **	PEX	SureLink	ASTM E84
1/2", 3/4"
^ Flame Spread Index <= 25, Smoke Developed Index <= 50 § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. ** Flame Spread Index and Smoke Developed Index based on minimum spacing of 18 inches between tubing runs. Tubing shall be marked [NSF®-fs ASTM E84 FS<=25/SD<=50].

Fire Sprinkler Pipe and Fitting Systems

Product Type	Material Type	Trade Name	Product Standard
Pipe and Fitting System% * ¢*	MLTPL	PureLink Plus *	ANSI/CAN/UL 1821
Adapter
3/4" PEX F1960 × 3/4" M/Sweat No Lead Brass Adapter (EX27122NL)	1" PEX F1960 × 1" M/Sweat No Lead Brass Adapter (EX27128NL)	1-1/4" PEX F1960 × 1-1/4" M/Sweat No Lead Brass Adapter (EX27135NL)	1-1/2" PEX F1960 × 1-1/2" M/Sweat No Lead Brass Adapter (EX27141NL)
2" PEX F1960 × 2" M/Sweat No Lead Brass Adapter (EX27154NL)	3/4" PEX F1960 × 3/4" F/Sweat No Lead Brass Adapter (EX27222NL)	1" PEX F1960 × 1" F/Sweat No Lead Brass Adapter (EX27228NL)	1-1/4" PEX F1960 × 1-1/4" F/Sweat No Lead Brass Adapter (EX27235NL)
1-1/2" PEX F1960 × 1-1/2" F/Sweat No Lead Brass Adapter (EX27241NL)	2" PEX F1960 × 2" F/Sweat No Lead Brass Adapter (EX27254NL)	3/4" PEX F1960 × 3/4" MNPT No Lead Brass Adapter (EX27522NL)	1" PEX F1960 × 1" MNPT No Lead Brass Adapter (EX27528NL)
1-1/4" PEX F1960 × 1-1/4" MNPT No Lead Brass Adapter (EX27535NL)	N/A1-1/2" PEX F1960 × 1-1/2" MNPT No Lead Brass Adapter (EX27541NL)	2" PEX F1960 × 2" MNPT No Lead Brass Adapter (EX27554NL)	3/4" PEX F1960 × 3/4" FNPT No Lead Brass Adapter (EX27622NL)
1" PEX F1960 × 1" FNPT No Lead Brass Adapter (EX27628NL)	1-1/4" PEX F1960 × 1-1/4" FNPT No Lead Brass Adapter (EX27635NL)	1-1/2" PEX F1960 × 1-1/2" FNPT No Lead Brass Adapter (EX27641NL)	3/4" PEX F1960 × 1/2" M/Sweat No Lead Brass Adapter (EX27125NL)
N/A3/4" PEX F1960 × 1/2" F/Sweat No Lead Brass Adapter (EX27225NL)	3/4" PEX F1960 × 1/2" MNPT No Lead Brass Adapter (EX27525NL)
Coupling
3/4" × 3/4" PEX F1960 HPP Coupling (EX19022)	1" × 1" PEX F1960 HPP Coupling (EX19028)	1-1/4" × 1-1/4" PEX F1960 HPP Coupling (EX19035)	1-1/2" × 1-1/2" PEX F1960 HPP Coupling (EX19041)
2" × 2" PEX F1960 HPP Coupling (EX19054)	1-1/4" × 1" PEX F1960 HPP Coupling (EX19238)	1-1/2" × 1-1/4" PEX F1960 HPP Coupling (EX19243)	1-1/2" × 1" PEX F1960 HPP Coupling (EX19248)
2" × 1-1/2" PEX F1960 HPP Coupling (EX19264)	1" × 3/4" PEX F1960 HPP Coupling (EX19282)	3/4" × 1/2" PEX F1960 HPP Coupling (EX19225)
Elbow
3/4" × 3/4" PEX F1960 HPP Elbow EX18022	1" × 1" PEX F1960 HPP Elbow EX18028	1-1/4" × 1-1/4" PEX F1960 HPP Elbow EX18035	1-1/2" × 1-1/2" PEX F1960 HPP Elbow EX18041
2" × 2" PEX F1960 HPP Elbow EX18054
Expansion Rings
3/4" PEX F1960 HPP Expansion Ring	1" PEX F1960 HPP Expansion Ring	1-1/4" PEX F1960 HPP Expansion Ring	1-1/2" PEX F1960 HPP Expansion Ring
2" PEX F1960 HPP Expansion Ring
Plugs
3/4" PEX F1960 HPP Plug (EX15022)	1" PEX F1960 HPP Plug (EX15028)	1-1/4" PEX F1960 HPP Plug (EX15035)	1-1/2" PEX F1960 HPP Plug (EX15041)
2" PEX F1960 HPP Plug (EX15054)
Tees
3/4" × 3/4" × 3/4" PEX F1960 HPP Tee (EX16222)	1-1/4" × 1-1/4" × 3/4" PEX F1960 HPP Tee (EX16332)	1-1/4" × 1-1/4" × 1-1/4" PEX F1960 HPP Tee (EX16333)	1-1/4" × 1-1/4" × 1" PEX F1960 HPP Tee (EX16338)
1-1/4" × 1" × 3/4" PEX F1960 HPP Tee (EX16382)	N1-1/4" × 1" × 1" PEX F1960 HPP Tee (EX16388)	1-1/2" × 1-1/4" × 3/4" PEX F1960 HPP Tee (EX16432)	1-1/2" × 1-1/4" × 1-1/4" PEX F1960 HPP Tee (EX16433)
1-1/2" × 1-1/4" × 1" PEX F1960 HPP Tee (EX16438)	1-1/2" × 1-1/2" × 3/4" PEX F1960 HPP Tee (EX16442)	1-1/2" × 1-1/2" × 1-1/4" PEX F1960 HPP Tee (EX16443)	1-1/2" × 1-1/2" × 1-1/2" PEX F1960 HPP Tee (EX16444)
1-1/2" × 1-1/2" × 1" PEX F1960 HPP Tee (EX16448)	1-1/2" × 1" × 1" PEX F1960 HPP Tee (EX16488)	2" × 1-1/2" × 3/4" PEX F1960 HPP Tee (EX16642)	2" × 1-1/2" × 1-1/4" PEX F1960 HPP Tee (EX16643)
2" × 1-1/2" × 1-1/2" PEX F1960 HPP Tee (EX16644)	2" × 1-1/2" × 1" PEX F1960 HPP Tee (EX16648)	2" × 2" × 3/4" PEX F1960 HPP Tee (EX16662)	2" × 2" × 1-1/4" PEX F1960 HPP Tee (EX16663)
2" × 2" × 1-1/2" PEX F1960 HPP Tee (EX16664)	2" × 2" × 2" PEX F1960 HPP Tee (EX16666)	2" × 2" × 1" PEX F1960 HPP Tee (EX16668)	1" × 3/4" × 3/4" PEX F1960 HPP Tee (EX16822)
1" × 3/4" × 1" PEX F1960 HPP Tee (EX16828)	1" × 1" × 3/4" PEX F1960 HPP Tee (EX16882)	1" × 1" × 1" PEX F1960 HPP Tee (EX16888)	3/4" × 3/4" × 1/2" PEX F1960 HPP Tee (EX16225)
3/4" × 1/2" × 3/4" PEX F1960 HPP Tee (EX16252)	3/4" × 1/2" × 1/2" PEX F1960 HPP Tee (EX16255)	1-1/4" × 1-1/4" × 1/2" PEX F1960 HPP Tee (EX16335)	1-1/2" × 1-1/2" × 1/2" PEX F1960 HPP Tee (EX16445)
1/2" × 1/2" × 3/4" PEX F1960 HPP Tee (EX16552)	2" × 2" × 1/2" PEX F1960 HPP Tee (EX16665)	1" × 1" × 1/2" PEX F1960 HPP Tee (EX16885)
Tubing
3/4" - PureLink Plus (White, Red, Blue)	1" - PureLink Plus (White, Red, Blue)	1 1/4" - PureLink Plus (White, Red, Blue)	1 1/2" - PureLink Plus (White, Red, Blue)
2" - PureLink Plus (White, Red, Blue)
% PEX pipe and fittings are intended for use in multi-purpose piping systems of residential occupancies as defined in ANSI/NFPA 13D, "Installation of Sprinkler Systems in One- and Two- Family Dwellings and Manufactured Homes", the National Building Code of Canada, and the International Residential Code, Section 2904, and are designed to withstand a working pressure of not less than 130 psi at 120° F. PEX pipe and fittings are intended to be installed in accordance with the requirements specified in the manufacturer’s installation instructions and ANSI/NFPA 13D. Protection is intended to be provided for PEX pipe and fittings in multi-purpose piping systems. The minimum protection should consist of either (1) one layer of 3/8-in. gypsum wallboard, (2) a suspended membrane ceiling with lay-in panels or tiles having a weight of not less than 0.35 lbs per sq ft when installed with metallic support grids, or (3) 1/2 in plywood. PEX pipe and fittings are intended for use in areas where the maximum ambient temperature does not exceed 120° F. These pipe and fittings are not intended to be installed in outdoor applications. The PEX pipe and fittings are intended for use in wet-pipe systems only and have not been evaluated for use in dry-pipe systems. ** Pipe and fittings Certified as a system using installation and design manual titled "SureLink™ Fire Safety System". ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.

* These products may also be represented by the trade name SureLink™.

Facility : Calgary, Alberta, Canada

Surface Burning Characteristics of Building Materials

Product Type	Material Type	Trade Name	Product Standard
Tubing^ § **	PEX	PureLink Plus	ASTM E84
1/2", 3/4"
^ Flame Spread Index <= 25, Smoke Developed Index <= 50 § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. ** Flame Spread Index and Smoke Developed Index based on minimum spacing of 18 inches between tubing runs. Tubing shall be marked [NSF®-fs ASTM E84 FS<=25/SD<=50].
Tubing^ § **	PEX	SureLink	ASTM E84
1/2", 3/4"
^ Flame Spread Index <= 25, Smoke Developed Index <= 50 § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. ** Flame Spread Index and Smoke Developed Index based on minimum spacing of 18 inches between tubing runs. Tubing shall be marked [NSF®-fs ASTM E84 FS<=25/SD<=50].

Fire Sprinkler Pipe and Fitting Systems

Product Type	Material Type	Trade Name	Product Standard
Pipe and Fitting System% * ¢*	MLTPL	PureLink Plus *	ANSI/CAN/UL 1821
Adapter
3/4" PEX F1960 × 3/4" M/Sweat No Lead Brass Adapter (EX27122NL)	1" PEX F1960 × 1" M/Sweat No Lead Brass Adapter (EX27128NL)	1-1/4" PEX F1960 × 1-1/4" M/Sweat No Lead Brass Adapter (EX27135NL)	1-1/2" PEX F1960 × 1-1/2" M/Sweat No Lead Brass Adapter (EX27141NL)
2" PEX F1960 × 2" M/Sweat No Lead Brass Adapter (EX27154NL)	3/4" PEX F1960 × 3/4" F/Sweat No Lead Brass Adapter (EX27222NL)	1" PEX F1960 × 1" F/Sweat No Lead Brass Adapter (EX27228NL)	1-1/4" PEX F1960 × 1-1/4" F/Sweat No Lead Brass Adapter (EX27235NL)
1-1/2" PEX F1960 × 1-1/2" F/Sweat No Lead Brass Adapter (EX27241NL)	2" PEX F1960 × 2" F/Sweat No Lead Brass Adapter (EX27254NL)	3/4" PEX F1960 × 3/4" MNPT No Lead Brass Adapter (EX27522NL)	1" PEX F1960 × 1" MNPT No Lead Brass Adapter (EX27528NL)
1-1/4" PEX F1960 × 1-1/4" MNPT No Lead Brass Adapter (EX27535NL)	N/A1-1/2" PEX F1960 × 1-1/2" MNPT No Lead Brass Adapter (EX27541NL)	2" PEX F1960 × 2" MNPT No Lead Brass Adapter (EX27554NL)	3/4" PEX F1960 × 3/4" FNPT No Lead Brass Adapter (EX27622NL)
1" PEX F1960 × 1" FNPT No Lead Brass Adapter (EX27628NL)	1-1/4" PEX F1960 × 1-1/4" FNPT No Lead Brass Adapter (EX27635NL)	1-1/2" PEX F1960 × 1-1/2" FNPT No Lead Brass Adapter (EX27641NL)	3/4" PEX F1960 × 1/2" M/Sweat No Lead Brass Adapter (EX27125NL)
N/A3/4" PEX F1960 × 1/2" F/Sweat No Lead Brass Adapter (EX27225NL)	3/4" PEX F1960 × 1/2" MNPT No Lead Brass Adapter (EX27525NL)
Coupling
3/4" × 3/4" PEX F1960 HPP Coupling (EX19022)	1" × 1" PEX F1960 HPP Coupling (EX19028)	1-1/4" × 1-1/4" PEX F1960 HPP Coupling (EX19035)	1-1/2" × 1-1/2" PEX F1960 HPP Coupling (EX19041)
2" × 2" PEX F1960 HPP Coupling (EX19054)	1-1/4" × 1" PEX F1960 HPP Coupling (EX19238)	1-1/2" × 1-1/4" PEX F1960 HPP Coupling (EX19243)	1-1/2" × 1" PEX F1960 HPP Coupling (EX19248)
2" × 1-1/2" PEX F1960 HPP Coupling (EX19264)	1" × 3/4" PEX F1960 HPP Coupling (EX19282)	3/4" × 1/2" PEX F1960 HPP Coupling (EX19225)
Elbow
3/4" × 3/4" PEX F1960 HPP Elbow EX18022	1" × 1" PEX F1960 HPP Elbow EX18028	1-1/4" × 1-1/4" PEX F1960 HPP Elbow EX18035	1-1/2" × 1-1/2" PEX F1960 HPP Elbow EX18041
2" × 2" PEX F1960 HPP Elbow EX18054
Expansion Rings
3/4" PEX F1960 HPP Expansion Ring	1" PEX F1960 HPP Expansion Ring	1-1/4" PEX F1960 HPP Expansion Ring	1-1/2" PEX F1960 HPP Expansion Ring
2" PEX F1960 HPP Expansion Ring
Plugs
3/4" PEX F1960 HPP Plug (EX15022)	1" PEX F1960 HPP Plug (EX15028)	1-1/4" PEX F1960 HPP Plug (EX15035)	1-1/2" PEX F1960 HPP Plug (EX15041)
2" PEX F1960 HPP Plug (EX15054)
Tees
3/4" × 3/4" × 3/4" PEX F1960 HPP Tee (EX16222)	1-1/4" × 1-1/4" × 3/4" PEX F1960 HPP Tee (EX16332)	1-1/4" × 1-1/4" × 1-1/4" PEX F1960 HPP Tee (EX16333)	1-1/4" × 1-1/4" × 1" PEX F1960 HPP Tee (EX16338)
1-1/4" × 1" × 3/4" PEX F1960 HPP Tee (EX16382)	N1-1/4" × 1" × 1" PEX F1960 HPP Tee (EX16388)	1-1/2" × 1-1/4" × 3/4" PEX F1960 HPP Tee (EX16432)	1-1/2" × 1-1/4" × 1-1/4" PEX F1960 HPP Tee (EX16433)
1-1/2" × 1-1/4" × 1" PEX F1960 HPP Tee (EX16438)	1-1/2" × 1-1/2" × 3/4" PEX F1960 HPP Tee (EX16442)	1-1/2" × 1-1/2" × 1-1/4" PEX F1960 HPP Tee (EX16443)	1-1/2" × 1-1/2" × 1-1/2" PEX F1960 HPP Tee (EX16444)
1-1/2" × 1-1/2" × 1" PEX F1960 HPP Tee (EX16448)	1-1/2" × 1" × 1" PEX F1960 HPP Tee (EX16488)	2" × 1-1/2" × 3/4" PEX F1960 HPP Tee (EX16642)	2" × 1-1/2" × 1-1/4" PEX F1960 HPP Tee (EX16643)
2" × 1-1/2" × 1-1/2" PEX F1960 HPP Tee (EX16644)	2" × 1-1/2" × 1" PEX F1960 HPP Tee (EX16648)	2" × 2" × 3/4" PEX F1960 HPP Tee (EX16662)	2" × 2" × 1-1/4" PEX F1960 HPP Tee (EX16663)
2" × 2" × 1-1/2" PEX F1960 HPP Tee (EX16664)	2" × 2" × 2" PEX F1960 HPP Tee (EX16666)	2" × 2" × 1" PEX F1960 HPP Tee (EX16668)	1" × 3/4" × 3/4" PEX F1960 HPP Tee (EX16822)
1" × 3/4" × 1" PEX F1960 HPP Tee (EX16828)	1" × 1" × 3/4" PEX F1960 HPP Tee (EX16882)	1" × 1" × 1" PEX F1960 HPP Tee (EX16888)	3/4" × 3/4" × 1/2" PEX F1960 HPP Tee (EX16225)
3/4" × 1/2" × 3/4" PEX F1960 HPP Tee (EX16252)	3/4" × 1/2" × 1/2" PEX F1960 HPP Tee (EX16255)	1-1/4" × 1-1/4" × 1/2" PEX F1960 HPP Tee (EX16335)	1-1/2" × 1-1/2" × 1/2" PEX F1960 HPP Tee (EX16445)
1/2" × 1/2" × 3/4" PEX F1960 HPP Tee (EX16552)	2" × 2" × 1/2" PEX F1960 HPP Tee (EX16665)	1" × 1" × 1/2" PEX F1960 HPP Tee (EX16885)
Tubing
3/4" - PureLink Plus (White, Red, Blue)	1" - PureLink Plus (White, Red, Blue)	1 1/4" - PureLink Plus (White, Red, Blue)	1 1/2" - PureLink Plus (White, Red, Blue)
2" - PureLink Plus (White, Red, Blue)
% PEX pipe and fittings are intended for use in multi-purpose piping systems of residential occupancies as defined in ANSI/NFPA 13D, "Installation of Sprinkler Systems in One- and Two- Family Dwellings and Manufactured Homes", the National Building Code of Canada, and the International Residential Code, Section 2904, and are designed to withstand a working pressure of not less than 130 psi at 120° F. PEX pipe and fittings are intended to be installed in accordance with the requirements specified in the manufacturer’s installation instructions and ANSI/NFPA 13D. Protection is intended to be provided for PEX pipe and fittings in multi-purpose piping systems. The minimum protection should consist of either (1) one layer of 3/8-in. gypsum wallboard, (2) a suspended membrane ceiling with lay-in panels or tiles having a weight of not less than 0.35 lbs per sq ft when installed with metallic support grids, or (3) 1/2 in plywood. PEX pipe and fittings are intended for use in areas where the maximum ambient temperature does not exceed 120° F. These pipe and fittings are not intended to be installed in outdoor applications. The PEX pipe and fittings are intended for use in wet-pipe systems only and have not been evaluated for use in dry-pipe systems. ** Pipe and fittings Certified as a system using installation and design manual titled "SureLink™ Fire Safety System". ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.

* These products may also be represented by the trade name SureLink™.

Huaru Pipe Inc
116 Maple Street
Commerce, TX 75428
United States
315-418-0770

Facility : Commerce, TX

Surface Burning Characteristics of Building Materials

Product Type	Material Type	Trade Name	Product Standard
Tubing[1] [2]	PEX	Valtec	CAN/ULC S102.2
1/2"
[1] Tubing shall be marked [cNSF®-fs CAN/ULC S102.2 FS<=25/SD<=50]. [2] Flame Spread Value (FSV) <= 25 Smoke Developed Value (SDV) <= 50
Tubing[1] [3]	PEX	Valtec	ASTM E84
1/2"
[1] Tubing shall be marked [cNSF®-fs CAN/ULC S102.2 FS<=25/SD<=50]. [3] Flame Spread Index <= 25 Smoke Developed Index <=50

IPEX Incorporated
3 Place Du Commerce, Suite 101
Île-Des-Soeurs
Verdun, QC H3E 1H7
Canada
514-769-2200
Visit this company's website

Facility : Mississauga, Ontario, Canada

Surface Burning Characteristics of Building Materials

Product Type	Material Type	Trade Name	Product Standard
Fittings~ [1] [2] [3]	PVC	System XFR	CAN/ULC S102.2
101002 ELBOW 180° FOR 526431	101004 ELBOW 180° FOR 526441	101009 ELBOW 180° FOR 526505	101011 ELBOW 180° FOR 526443
101012 ELBOW 180° FOR 526444	101013 ELBOW 180° FOR 526432	101014 ELBOW 180° FOR 526442	101015 ELBOW 180° FOR 526433
101016 ELBOW 180° FOR 526434	101018 ELBOW 90° FOR 526431	101019 ELBOW 90° FOR 526432	101020 ELBOW 90° FOR 526433
101021 ELBOW 90° FOR 526434	101023 ELBOW 90° FOR 526443	101024 ELBOW 90° FOR 526444	101031 PVC DWV MAIN PIECE FOR 526321
101032 PVC DWV MAIN PIECE FOR 526329	101034 PVC DWV MAIN PIECE FOR 526555	101035 PVC DWV MAIN PIECE FOR 526556	101037 PVC DWV MAIN PIECE FOR 526586
101039 PVC DWV RING FOR 526586 & 526588	101041 PVC DWV MAIN PIECE FOR 526330	101045 PVC DWV MAIN PIECE FOR 526485	101046 PVC DWV MAIN PIECE FOR 526486
101047 PVC DWV MAIN PIECE FOR 526487	101048 PVC DWV MAIN PIECE FOR 526494	101066 PVC DWV NUT 1½"	101068 PVC DWV NUT 2"
101104 PVC DWV MAIN PIECE FOR 526104	101105 PVC DWV MAIN PIECE FOR 526105	101134 PVC DWV MAIN PIECE FOR 526040	101135 PVC DWV MAIN PIECE FOR 526041
101136 PVC DWV MAIN PIECE FOR 526103	101161 PVC DWV MAIN PIECE FOR 526161	101401 PVC DWV 1 1/2" PLUG MPT	101402 PVC DWV 2" PLUG MPT
101403 PVC DWV 3" PLUG MPT	101404 PVC DWV 4" PLUG MPT	101405 PVC DWV 6" PLUG MPT	101588 PVC DWV MAIN PIECE FOR 526588
101601 PVC DWV 1 1/2" CLEANOUT SPXFPT	101602 PVC DWV 2" CLEANOUT SPXFPT	101603 PVC DWV 3" CLEANOUT SPXFPT	101604 PVC DWV 4" CLEANOUT SPXFPT
101606 PVC DWV 6" CLEANOUT SPXFPT	101630 NUT 1¼"	101631 NUT 1½"	101890 THREAD CAP FOR P-TRAP
526003 P-TRAP PRIMER TEE 3" X 3" X ½" HXHXFPT	526011 P-TRAP PRIMER TEE 4" X 4" X ½" HXHXFPT	526025 PVC DWV 3" 90° SHORT ELBOW HXH	526035 PVC DWV 2" 90° SHORT ELBOW HXH
526040 PVC DWV 1 1/2" CLEANOUT TEE W/P PVC	526041 PVC DWV 2" CLEANOUT TEE W/P PVC	526042 PVC DWV 1 1/2" CLEANOUT W/O PLUG	526046 PVC DWV 2" CLEANOUT W/O PLUG
526047 PVC DWV 3" CLEANOUT W/O PLUG	526056 PVC DWV 2" X 2" X 1 1/2" TY HXHXH	526058 PVC DWV 2" X 1 1/2" X 1 1/2" TY HXHXH	526060 PVC DWV 3" X 3" X 2" TY HXHXH
526061 PVC DWV 3" X 3" X 1 1/2" TY HXHXH	526064 PVC DWV 4" X 4" X 2" TY HXHXH	526066 PVC DWV 4" X 4" X 3" TY HXHXH	526071 PVC DWV 2" 45° ELBOW HXS
526072 PVC DWV 4" 45° HXS	526081 PVC DWV 1 1/2" TY HXHXH	526082 PVC DWV 2" TY HXHXH	526083 PVC DWV 3" TY HXHXH
526084 PVC DWV 4" TY HXHXH	526103 PVC DWV 3" CLEANOUT TEE W/P PVC	526104 PVC DWV 4" CLEANOUT TEE W/P PVC	526105 PVC DWV 4" X 3" X 4" CLEANOUT T W/P PVC
526121 PVC DWV 1 1/2" 90° DEG ELBOW HXH	526122 PVC DWV 2" 90°ELBOW HXH	526123 PVC DWV 3" 90° ELBOW HXH	526124 PVC DWV 4" 90°ELBOW HXH
526161 PVC DWV 6" CLEANOUT TEE W/P PVC	526171 PVC DWV 1 1/2" 45° Y HXHXH	526172 PVC DWV 2" 45° Y HXHXH	526173 PVC DWV 3" 45° Y HXHXH
526174 PVC DWV 4" 45° Y HXHXH	526175 PVC DWV 6" Y HXHXH	526194 PVC DWV 2" X 1 1/2" X 1 1/2" Y HXHXH	526195 PVC DWV 2" X 2" X 1 1/2" Y HXHXH
526196 PVC DWV 3" X 3" X 2" Y HXHXH	526197 PVC DWV 4" X 4" X 3" Y HXHXH	526198 PVC DWV 4" X 4" X 2" Y HXHXH	526199 PVC DWV 6" X 6" X 4" Y HXHXH
526201 PVC DWV 3" X 3" X 1 1/2" Y HXHXH	526221 PVC DWV 1 1/2" 45° ELBOW HXS	526223 PVC DWV 3" 45° ELBOW HXS	526231 PVC DWV 1 1/2" 90° ELBOW HXS
526232 PVC DWV 2" 90° ELBOW HXS	526233 PVC DWV 3" 90° ELBOW HXS	526234 PVC DWV 4" 90° ELBOW SPxH	526241 PVCDWV 1 1/2" 45° ELBOW HXH
526242 PVC DWV 2" 45° ELBOW HXH	526243 PVC DWV 3" 45° ELBOW HXH	526244 PVC DWV 4" 45° ELBOW HXH	526251 PVC DWV 1 1/2" 22.5° ELBOW HxH
526252 PVC DWV 2" 22.5° ELBOW HxH	526253 PVC DWV 3" 22.5° ELBOW HxH	526254 PVC DWV 4" 22.5° ELBOW HxH	526261 PVC DWV 1 1/2" 60° ELBOW HxH
526262 PVC DWV 2" 60° ELBOW HxH	526263 PVC DWV 3" 60° ELBOW HxH	526264 PVC DWV 4" 60° ELBOW HXH	526277 PVC DWV 1 1/2" X 1/2" DISH.ADAPT.
526282 PVC DWV 2" x 1/2" RED. BUSHING SXH	526284 PVC DWV 3" X 2" REDUC. BUSH. SPxH	526286 PVC DWV 4" X 3" REDUC. BUSH. SPxH	526288 PVC DWV 4" X 2" REDUC. BUSH. SPxH
526291 PVC/DWV 1 1/2" TUBE END C/O W/P PVC	526292 PVC DWV 3" x 1 1/2" REDUC. BUSH. SPxH	526294 PVC DWV 4" X 3" REDUC. BUSH. SPxH	526277 PVC DWV 1 1/2"x1/2" XFR Red. Bushing SpxFPT
526278 PVC DWV1 1/2"x 3/4" XFR Red. Bushing SpxFPT	526298 PVC/DWV 2" TUBE END C/O W/P PVC	526299 PVC/DWV 3" TUBE END C/O W/P PVC	526300 PVC/DWV 4" TUBE END C/O W/P PVC
526310 PVC DWV 2" AD.SEWER TO DWV SPXH	526311 PVC DWV 3"AD.SEWER to DWV SPXH	526312 PVC DWV 4" AD.SEWER to DWV SPXH	526313 PVC DWV 6" ADAPT SEWER TO DWV HXS
526321 PVC DWV 1 1/2" TRAP ADAP. H	526329 PVC DWV 1 1/2" X 1 1/4" TRAP ADAP. H	526330 1 1/2" 90° ELBOW W/SLIP JOINT NUT	526331 PVC DWV 1 1/2" ADAPTER HxMPT
526332 PVC DWV 2" ADAPTER HxMPT	526333 PVC DWV 3" ADAPTER HxMPT	526334 PVC DWV 4" ADAPTER HxMPT	526341 PVC DWV 1 1/2" ADAPTER HxFPT
526342 PVC DWV 2" ADAPTER HxFPT	526343 PVC DWV 3" ADAPTER HxFPT	526344 PVC DWV 4" ADAPTER HxFPT	526345 PVC DWV 1 1/2" CLEANOUT W/PLUG PVC
526346 PVC DWV 2" CLEANOUT W/PLUG PVC	526347 PVC DWV 3" CLEANOUT W/PLUG PVC	526348 PVC DWV 4" CLEANOUT W/PLUG PVC	526349 PVC DWV 6" CLEANOUT W/PLUG PVC
526351 PVC DWV 1 1/2" COUPLING HXH	526352 PVC DWV 2" COUPLING HXH	526353 PVC DWV 3" COUPLING HXH	526354 PVC DWV 4" COUPLING HXH
526362 PVC DWV 2" X 1 1/2" COUPLING HXH	526363 PVC DWV 3" X 1 1/2" COUPLING HXH	526364 PVC DWV 3" X 2" COUPLING HXH	526365 PVC DWV 4" X 2" COUPLING HXH
526366 PVC DWV 4" X 3" COUPLING HXH	526369 PVC DWV 4" X 1 1/2" COUPLING HXH	526376 PVC DWV 4" X 3" COUPLING HXH	526395 PVC DWV 3" X 1 1/2" INLET LEFT HAND
526396 PVC DWV 3" X 2" INLET LEFT HAND	526397 PVC DWV 3" X 1 1/2" INLET RIGHT HAND	526398 PVC DWV 3" X 2" INLET RIGHT HAND	526018 PVC DWV 3X1.5 DOUBLE INLET
526402 PVC DWV 2" GASKET PLUG	526404 PVC DWV 4" GASKET PLUG	526405 PVC DWV 6" GASKET PLUG	526411 PVC DWV 1 1/2" PERMANENT CAP
526412 PVC DWV 2" PERMANENT CAP	526413 PVC DWV 3" PERMANENT CAP	526414 PVC DWV 4" PERMANENT CAP	526431 PVC DWV 1 1/2" P-TRAP
526432 PVC DWV 2" P-TRAP	526433 PVC DWV 3" P-TRAP	526434 PVC DWV 4" P-TRAP	526441 PVC DWV 1 1/2" P-TRAP W/PLUG
526442 PVC DWV 2" P-TRAP W/PLUG	526443 PVC DWV 1 1/2" P-TRAP DOUBLE SEAL	526444 PVC DWV 2" P-TRAP DOUBLE SEAL	526485 PVC DWV 1½" EXPANSION JOINT HXH
526486 PVC DWV 2" EXPANSION JOINT HXH	526487 PVC DWV 3" EXPANSION JOINT HXH	526494 PVC DWV 3" EXPANSION JOINT HXS	526495 DISHWASHER Y 1½" HXHXBARBS
526499 PVC DWV ELBOW 4" 180° HXH	526505 PVC DWV 1 1/2" P-TRAP DOUBLE SEAL W/P	526522 PVC DWV 2" CAST IRON ADAPT MJ	526523 PVC DWV 3" CAST IRON ADAPT MJ
526524 PVC DWV 4" CAST IRON ADAPT MJ	526535 PVC DWV 4" X 3" CAST IRON ADAPT MJ	526538 PVC DWV 3" X 1 1/2" DOUBLE TY HXHXHXH	526542 PVC DWV 1 1/2" DOUBLE TY HXHXHXH
526543 PVC DWV 2" DOUBLE TY HXHXHXH	526547 PVC DWV 2" X 1 1/2" DOUBLE TY HXHXHXH	526550 PVC DWV 1 1/2" TY SXHXH	526552 PVC DWV 3" X 3" X 1 1/2" TY SXHXH
526555 PVC DWV 1 1/2" TRAP ADAPT. M	526556 PVC DWV 1 1/2" X 1 1/4" TRAP ADAPT. M	526573 PVC DWV 4" CLOSET FLANGE H	526584 PVC DWV 4" X 3" CLOSET FLANGE H
526586 PVC DWV 4" X 3" CLOSET FLANGE ADJUST.	526588 PVC DWV 4" X 3" CLO FLANGE ADJ W/C H	526591 PVC DWV 4" X 3" CLOSET FLANGE W/CAP	526592 PVC DWV 4" X 3" CLOSET FLANGE SP
526637 PVC DWV 1 1/2" DOUBLE Y HXHXHXH	526639 PVC DWV 3" DOUBLE Y HXHXHXH	526642 PVC DWV 2" X 1 1/2" DOUBLE Y HXHXHXH	526643 PVC DWV 3" X 1 1/2" DOUBLE Y HXHXHXH
526644 PVC DWV 3" X 2" DOUBLE Y HXHXHXH	526860 PVC DWV 6" X 4" RED. COUPLING HXH	526199 6" x 6" x 4" 45° WYE (HxHxH)	526175 6" x 6" x 6" 45° WYE (HxHxH)
526606 8" x 8" x 4" 45° WYE (HxHxH)	526607 8" x 8" x 6" 45° WYE (HxHxH)	526560 8" x 8" x 8" 45° WYE (HxHxH)	526054 6" x 4" Bushing SpxH
526073 6" x 6" 45° Elbow SpxH	526125 6" x 6" 90° Elbow HxH	526126 8" x 8" 90° Elbow HxH	526175 6" × 6" × 6" 45° Wye HxHxH
526199 6" × 6" × 4" 45° Wye HxHxH	526226 8" x 8" 45° Elbow SpxH	526242 2" x 2" 45° Elbow HxH	526235 6" x 6" 90° Elbow SpxH
526245 6" x 6" 45° Elbow HxH	526246 8" x 8" 45° Elbow HxH	526255 6" x 6" 22 1/2° Elbow HxH	526356 6" x 6" Coupling With Pipe Stop (HxH)
526358 8" x 8" Coupling With Pipe Stop (HxH)	526377 6" × 6" × 6" TY HxHxH	526385 6" × 6" × 4" TY HxHxH	526415 6” Cap H
526416 8” Cap H	526446 8" x 4" Bushing (SpxH)	526447 8" x 6" Bushing (SpxH)	526550 2” TY SpigotxHxH
526560 8" x 8" x 8" 45° Wye HxHxH	526606 8" x 8" x 4" 45° Wye HxHxH	526607 8" x 8" x 6" 45° Wye HxHxH	Coupling Socket x Socket 526183 10" PVC DWV COUPLING HxH
Coupling Socket x Socket 526184 12" PVC DWV COUPLING HxH SYSTEM	Elbow 22.5° 526156 8"x22 1/2D PVC DWV ELBOW HxH	Elbow 45° Socket x Socket 526421 10"x45D PVC DWV ELBOW HxH	Elbow 45° Socket x Socket 526422 12"x45D PVC DWV SHORT TURN ELBOW HxH
Elbow 45° Spigot x Socket 526531 10"x45D PVC DWV SHORT TURN ELBOW SPxH	Elbow 45° Spigot x Socket 526532 12"x45D PVC DWV SHORT TURN ELBOW SPxH	Elbow 90° Socket X socket 526132 10"x90D PVC DWV ELBOW HxH	Elbow 90° Socket X socket 526133 12"x90D PVC DWV ELBOW HxH
Elbow 90°Spigot X Socket 526114 10"x90D PVC DWV ELBOW SPxH	Elbow 90° Spigot X Socket 526115 12"x90D PVC DWV ELBOW SPxH	Plug 526350 8" PVC DWV C/O W/ PLUG SPxGSKT PLUG	Plug 526357 8" PVC DWV PLUG C/O MPT
Plug 526355 8" PVC DWV FTG C/O SPxFPT	Reducer Bushing Spigot x Socket 526851 10"x4" PVC DWV FLUSH RED. BUSHING SPxH	Reducer Bushing Spigot x Socket 526852 10"x6" PVC DWV FLUSH RED. BUSHING SPxH	Reducer Bushing Spigot x Socket 526853 10"x8" PVC DWV FLUSH RED. BUSHING SPxH
Reducer Bushing Spigot x Socket 526854 12"x4" PVC DWV FLUSH RED. BUSHING SPxH	Reducer Bushing Spigot x Socket 526855 12"x6" PVC DWV FLUSH RED. BUSHING SPxH	Reducer Bushing Spigot x Socket 526856 12"x8" PVC DWV FLUSH RED. BUSHING SPxH	Reducer Bushing Spigot x Socket 526857 12"x10" PVC DWV FLUSH RED. BUSHING SPxH
Reducer Bushing Spigot x Socket 526843 10"x8"x45D PVC DWV WYE HxHxH	Reducer Coupling Socket x Socket 526208 8"x4" PVC DWV REDUCER COUPLING HxH	Reducer Coupling Socket x Socket 526209 8"x6" PVC DWV REDUCER COUPLING HxH	Reducer Coupling Socket x Socket 526212 10"x8" PVC DWV REDUCER COUPLING HxH
Reducer Coupling Socket x Socket 526215 12"x10" PVC DWV REDUCER COUPLING HxH	Wye 45° Socket x Socket x Socket 526840 10"x45D PVC DWV WYE HxHxH	Wye 45° Socket x Socket x Socket 526841 10"x4"x45D PVC DWV WYE HxHxH	Wye 45° Socket x Socket x Socket 526842 10"x6"x45D PVC DWV WYE HxHxH
Wye 45° Socket x Socket x Socket 526844 12"x45D PVC DWV WYE HxHxH	Wye 45° Socket x Socket x Socket 526845 12"x4"x45D PVC DWV WYE HxHxH	Wye 45° Socket x Socket x Socket 526846 12"x6"x45D PVC DWV WYE HxHxH	Wye 45° Socket x Socket x Socket 526847 12"x8"x45D PVC DWV WYE HxHxH
Wye 45° Socket x Socket x Socket 526848 12"x10"x45D PVC DWV WYE HxHxH	XFR PVC Fabricated Fittings – 45° Wye 8” x 4”	XFR PVC Fabricated Fittings – 45° Wye 8” x 6”	XFR PVC Fabricated Fittings – 45° Wye 8” x 8”
XFR PVC Fabricated Fittings – 45° Wye 10” x 4”	XFR PVC Fabricated Fittings – 45° Wye 10” x 6”	XFR PVC Fabricated Fittings – 45° Wye 10” x 8”	XFR PVC Fabricated Fittings – 45° Wye 10” x 10”
XFR PVC Fabricated Fittings – 45° Wye 12” x 4”	XFR PVC Fabricated Fittings – 45° Wye 12” x 6”	XFR PVC Fabricated Fittings – 45° Wye 12” x 8”	XFR PVC Fabricated Fittings – 45° Wye 12” x 10”
XFR PVC Fabricated Fittings – 45° Wye 12” x 12”	XFR PVC Fabricated Fittings – 45° Wye 14” x 4”	XFR PVC Fabricated Fittings – 45° Wye 14” x 6”	XFR PVC Fabricated Fittings – 45° Wye 14” x 8”
XFR PVC Fabricated Fittings – 45° Wye 14” x 10”	XFR PVC Fabricated Fittings – 45° Wye 14” x 12”	XFR PVC Fabricated Fittings – 45° Wye 14” x 14”	XFR PVC Fabricated Fittings – 45° Wye 16” x 4”
XFR PVC Fabricated Fittings – 45° Wye 16” x 6”	XFR PVC Fabricated Fittings – 45° Wye 16” x 8”	XFR PVC Fabricated Fittings – 45° Wye 16” x 10”	XFR PVC Fabricated Fittings – 45° Wye 16” x 12”
XFR PVC Fabricated Fittings – 45° Wye 16” x 14”	XFR PVC Fabricated Fittings – 45° Wye 16” x 16”	XFR PVC Fabricated Fittings – 45° Wye 18” x 4”	XFR PVC Fabricated Fittings – 45° Wye 18” x 6”
XFR PVC Fabricated Fittings – 45° Wye 18” x 8”	XFR PVC Fabricated Fittings – 45° Wye 18” x 10”	XFR PVC Fabricated Fittings – 45° Wye 18” x 12”	XFR PVC Fabricated Fittings – 45° Wye 18” x 14”
XFR PVC Fabricated Fittings – 45° Wye 18” x 16”	XFR PVC Fabricated Fittings – 45° Wye 18” x 18”	XFR PVC Fabricated Fittings – Apartment Fitting 3”x3”x3”x1½”x1½” - 526007	XFR PVC Fabricated Fittings – Cap 8”
XFR PVC Fabricated Fittings – Cap 10”	XFR PVC Fabricated Fittings – Cap 12”	XFR PVC Fabricated Fittings – Cap 14”	XFR PVC Fabricated Fittings – Coupling 8”
XFR PVC Fabricated Fittings – Coupling 10”	XFR PVC Fabricated Fittings – Coupling 12”	XFR PVC Fabricated Fittings – Coupling 14”	XFR PVC Fabricated Fittings – Coupling 16”
XFR PVC Fabricated Fittings – Coupling 18”	XFR PVC Fabricated Fittings – Coupling ¼” Bend / 90° Elbow 8”	XFR PVC Fabricated Fittings – Coupling ¼” Bend / 90° Elbow 10”	XFR PVC Fabricated Fittings – Coupling ¼” Bend / 90° Elbow 12”
XFR PVC Fabricated Fittings – Coupling ¼” Bend / 90° Elbow 14”	XFR PVC Fabricated Fittings – Coupling ¼” Bend / 90° Elbow 16”	XFR PVC Fabricated Fittings – Coupling ¼” Bend / 90° Elbow 18”	XFR PVC Fabricated Fittings – Coupling 1/8” Bend / 45° Elbow 8”
XFR PVC Fabricated Fittings – Coupling 1/8” Bend / 45° Elbow 10”	XFR PVC Fabricated Fittings – Coupling 1/8” Bend / 45° Elbow 12”	XFR PVC Fabricated Fittings – Coupling 1/8” Bend / 45° Elbow 14”	XFR PVC Fabricated Fittings – Coupling 1/8” Bend / 45° Elbow 16”
XFR PVC Fabricated Fittings – Coupling 1/8” Bend / 45° Elbow 18”	XFR PVC Fabricated Fittings – Coupling 1/16” Bend / 22 ½° Elbow 8”	XFR PVC Fabricated Fittings – Coupling 1/16” Bend / 22 ½° Elbow 10”	XFR PVC Fabricated Fittings – Coupling 1/16” Bend / 22 ½° Elbow 12”
XFR PVC Fabricated Fittings – Coupling 1/16” Bend / 22 ½° Elbow 14”	XFR PVC Fabricated Fittings – Coupling 1/16” Bend / 22 ½° Elbow 18”	XFR PVC Fabricated Fittings – Coupling 1/16” Bend / 22 ½° Elbow 18”	XFR PVC Fabricated Fittings–Double Apartment Fitting 3x3x3x3x1½x1½x1½x1½-526008
XFR PVC Fabricated Fittings – Double Wye 8” x 4”	XFR PVC Fabricated Fittings – Double Wye 8” x 6”	XFR PVC Fabricated Fittings – Double Wye 8” x 8”	XFR PVC Fabricated Fittings – Double Wye 10” x 4”
XFR PVC Fabricated Fittings – Double Wye 10” x 6”	XFR PVC Fabricated Fittings – Double Wye 10” x 8”	XFR PVC Fabricated Fittings – Double Wye 10” x 10”	XFR PVC Fabricated Fittings – Double Wye 12” x 4”
XFR PVC Fabricated Fittings – Double Wye 12” x 6”	XFR PVC Fabricated Fittings – Double Wye 12” x 8”	XFR PVC Fabricated Fittings – Double Wye 12” x 10”	XFR PVC Fabricated Fittings – Double Wye 12” x 12”
XFR PVC Fabricated Fittings – Double Wye 14” x 4”	XFR PVC Fabricated Fittings – Double Wye 14” x 6”	XFR PVC Fabricated Fittings – Double Wye 14” x 8”	XFR PVC Fabricated Fittings – Double Wye 14” x 10”
XFR PVC Fabricated Fittings – Double Wye 14” x 12”	XFR PVC Fabricated Fittings – Double Wye 14” x 14”	XFR PVC Fabricated Fittings – Double Wye 16” x 4”	XFR PVC Fabricated Fittings – Double Wye 16” x 6”
XFR PVC Fabricated Fittings – Double Wye 16” x 8”	XFR PVC Fabricated Fittings – Double Wye 16” x 10”	XFR PVC Fabricated Fittings – Double Wye 16” x 12”	XFR PVC Fabricated Fittings – Double Wye 16” x 14”
XFR PVC Fabricated Fittings – Double Wye 16” x 16”	XFR PVC Fabricated Fittings – Double Wye 18” x 4”	XFR PVC Fabricated Fittings – Double Wye 18” x 6”	XFR PVC Fabricated Fittings - Double ° Wye 18” x 8”
XFR PVC Fabricated Fittings – Double Wye 18” x 10”	XFR PVC Fabricated Fittings – Double Wye 18” x 12”	XFR PVC Fabricated Fittings – Double Wye 18” x 14”	XFR PVC Fabricated Fittings – Double Wye 18” x 16”
XFR PVC Fabricated Fittings – Double Wye 18” x 18”	XFR PVC Fabricated Fittings – Reducing Bushing 8” x 4”	XFR PVC Fabricated Fittings – Reducing Bushing 8” x 6”	XFR PVC Fabricated Fittings – Reducing Bushing 10” x 4”
XFR PVC Fabricated Fittings – Reducing Bushing 10” x 6”	XFR PVC Fabricated Fittings – Reducing Bushing 10” x 8”	XFR PVC Fabricated Fittings – Reducing Bushing 12” x 4”	XFR PVC Fabricated Fittings – Reducing Bushing 12” x 6”
XFR PVC Fabricated Fittings – Reducing Bushing 12” x 8”	XFR PVC Fabricated Fittings – Reducing Bushing 12” x 10”	XFR PVC Fabricated Fittings – Reducing Bushing 14” x 4”	XFR PVC Fabricated Fittings – Reducing Bushing 14” x 6”
XFR PVC Fabricated Fittings – Reducing Bushing 14” x 8”	XFR PVC Fabricated Fittings – Reducing Bushing 14” x 10”	XFR PVC Fabricated Fittings – Reducing Bushing 14” x 12”	XFR PVC Fabricated Fittings – Reducing Bushing 16” x 4”
XFR PVC Fabricated Fittings – Reducing Bushing 16” x 6”	XFR PVC Fabricated Fittings – Reducing Bushing 16” x 8”	XFR PVC Fabricated Fittings – Reducing Bushing 16” x 10”	XFR PVC Fabricated Fittings – Reducing Bushing 16” x 12”
XFR PVC Fabricated Fittings – Reducing Bushing 16” x 14”	XFR PVC Fabricated Fittings – Reducing Bushing 18” x 4”	XFR PVC Fabricated Fittings – Reducing Bushing 18” x 6”	XFR PVC Fabricated Fittings – Reducing Bushing 18” x 8”
XFR PVC Fabricated Fittings – Reducing Bushing 18” x 10”	XFR PVC Fabricated Fittings – Reducing Bushing 18” x 12”	XFR PVC Fabricated Fittings – Reducing Bushing 18” x 14”	XFR PVC Fabricated Fittings – Reducing Bushing 18” x 16”
XFR PVC Fabricated Fittings – Tee 8” x 4”	XFR PVC Fabricated Fittings – Tee 8” x 6”	XFR PVC Fabricated Fittings – Tee 8” x 8”	XFR PVC Fabricated Fittings – Tee 10” x 4”
XFR PVC Fabricated Fittings – Tee 10” x 6”	XFR PVC Fabricated Fittings – Tee 10” x 8”	XFR PVC Fabricated Fittings – Tee 10” x 10”	XFR PVC Fabricated Fittings – Tee 12” x 4”
XFR PVC Fabricated Fittings – Tee 12” x 6”	XFR PVC Fabricated Fittings – Tee 12” x 8”	XFR PVC Fabricated Fittings – Tee 12” x 10”	XFR PVC Fabricated Fittings – Tee 12” x 12”
XFR PVC Fabricated Fittings – Tee 14” x 4”	XFR PVC Fabricated Fittings – Tee 14” x 6”	XFR PVC Fabricated Fittings – Tee 14” x 8”	XFR PVC Fabricated Fittings – Tee 14” x 10”
XFR PVC Fabricated Fittings – Tee 14” x 12”	XFR PVC Fabricated Fittings – Tee 14” x 14”	XFR PVC Fabricated Fittings – Tee 16” x 4”	XFR PVC Fabricated Fittings – Tee 16” x 6”
XFR PVC Fabricated Fittings – Tee 16” x 8”	XFR PVC Fabricated Fittings – Tee 16” x 10”	XFR PVC Fabricated Fittings – Tee 16” x 12”	XFR PVC Fabricated Fittings – Tee 16” x 14”
XFR PVC Fabricated Fittings – Tee 16” x 16”	XFR PVC Fabricated Fittings – Tee 18” x 4”	XFR PVC Fabricated Fittings – Tee 18” x 6”	XFR PVC Fabricated Fittings – Tee 18” x 8”
XFR PVC Fabricated Fittings – Tee 18” x 10”	XFR PVC Fabricated Fittings – Tee 18” x 12”	XFR PVC Fabricated Fittings – Tee 18” x 14”	XFR PVC Fabricated Fittings – Tee 18” x 16”
XFR PVC Fabricated Fittings – Tee 18” x 18”	XFR PVC Fabricated Fittings – Tee Wye (Sanitary Tees) 8” x 4”	XFR PVC Fabricated Fittings – Tee Wye (Sanitary Tees) 8” x 6”	XFR PVC Fabricated Fittings – Tee Wye (Sanitary Tees) 8” x 8”
XFR PVC Fabricated Fittings – Tee Wye (Sanitary Tees) 10” x 4”	XFR PVC Fabricated Fittings – Tee Wye (Sanitary Tees) 10” x 6”	XFR PVC Fabricated Fittings – Tee Wye (Sanitary Tees) 10” x 8”	XFR PVC Fabricated Fittings – Tee Wye (Sanitary Tees) 10” x 10”
XFR PVC Fabricated Fittings – Tee Wye (Sanitary Tees) 12” x 4”	XFR PVC Fabricated Fittings – Tee Wye (Sanitary Tees) 12” x 6”	XFR PVC Fabricated Fittings – Tee Wye (Sanitary Tees) 12” x 8”	XFR PVC Fabricated Fittings – Tee Wye (Sanitary Tees) 12” x 10”
XFR PVC Fabricated Fittings – Tee Wye (Sanitary Tees) 12” x 12”	XFR PVC Fabricated Fittings – Tee Wye (Sanitary Tees) 14” x 4”	XFR PVC Fabricated Fittings – Tee Wye (Sanitary Tees) 14” x 6”	XFR PVC Fabricated Fittings – Tee Wye (Sanitary Tees) 14” x 8”
XFR PVC Fabricated Fittings – Tee Wye (Sanitary Tees) 14” x 10”	XFR PVC Fabricated Fittings – Tee Wye (Sanitary Tees) 14” x 12”	XFR PVC Fabricated Fittings – Tee Wye (Sanitary Tees) 14” x 14”	XFR PVC Fabricated Fittings – Tee Wye (Sanitary Tees) 16” x 4”
XFR PVC Fabricated Fittings – Tee Wye (Sanitary Tees) 16” x 6”	XFR PVC Fabricated Fittings – Tee Wye (Sanitary Tees) 16” x 8”	XFR PVC Fabricated Fittings – Tee Wye (Sanitary Tees) 16” x 10”	XFR PVC Fabricated Fittings – Tee Wye (Sanitary Tees) 16” x 12”
XFR PVC Fabricated Fittings – Tee Wye (Sanitary Tees) 16” x 14”	XFR PVC Fabricated Fittings – Tee Wye (Sanitary Tees) 16” x 16”	XFR PVC Fabricated Fittings – Tee Wye (Sanitary Tees) 18” x 4”	XFR PVC Fabricated Fittings – Tee Wye (Sanitary Tees) 18” x 6”
XFR PVC Fabricated Fittings – Tee Wye (Sanitary Tees) 18” x 8”	XFR PVC Fabricated Fittings – Tee Wye (Sanitary Tees) 18” x 10”	XFR PVC Fabricated Fittings – Tee Wye (Sanitary Tees) 18” x 12”	XFR PVC Fabricated Fittings – Tee Wye (Sanitary Tees) 18” x 14”
XFR PVC Fabricated Fittings – Tee Wye (Sanitary Tees) 18” x 16”	XFR PVC Fabricated Fittings – Tee Wye (Sanitary Tees) 18” x 18”
~ Product is authorized to bear the cNSF Mark. [1] System XFR® PVC fittings have been tested in conjunction with System XFR® pipe only, for use in drain, waste and ventilation applications. [2] FSR and SDC listed values obtained with 10 mm and 0 mm exposed pipe lengths between fittings. [3] Flame Spread Value (FSV) <=25 Smoke Developed Value (SDV) <=50
Pipe~ [1] [2] [3]	PVC	System XFR	CAN/ULC S102.2
1 1/2" Sch 40
2" Sch 40
3" Sch 40
4" Sch 40
6" Sch 40
8" Sch 40
10" Sch 40
12" Sch 40
14" Sch 40
16" Sch 40
18" Sch 40
~ Product is authorized to bear the cNSF Mark. [1] System XFR® PVC fittings have been tested in conjunction with System XFR® pipe only, for use in drain, waste and ventilation applications. [2] FSR and SDC listed values obtained with 10 mm and 0 mm exposed pipe lengths between fittings. [3] Flame Spread Value (FSV) <=25 Smoke Developed Value (SDV) <=50

NOTE: Only products bearing the NSF Mark are NSF Certified.

Facility : Toronto, Ontario, Canada

Surface Burning Characteristics of Building Materials

Product Type	Material Type	Trade Name	Product Standard
Fittings~ [1] [2] [3]	CPVC	IPEX (Aquarise)	CAN/ULC S102.2
Adapter (IPS S x CTS S)
359101 3/4"	359100 1/2"
Adapter (IPS SOC x CTS S)
359098 3/4"	359097 1/2"
45° Elbow (Soc x Soc)
359164 1/2"	359165 3/4"	359166 1"	359167 1 1/4"
359168 1 1/2"	359169 2"	359170 2 1/2"	359171 3"
359172 4"	359173 6"
90° Elbow (Soc x Soc)
359194 1/2"	359195 3/4"	359196 1"	359197 1 1/4
359198 1 1/2"	359199 2"	359200 2 1/2"	359201 3"
359202 4"	359203 6"
90° Street Elbow (S x S)
359175 1/2"	359176 3/4"	359177 1"
Cap (Soc)
359109 1/2"	359110 3/4"	359111 1"	359112 1 1/4"
359113 1 1/2"	359114 2"	359115 2 1/2"	359116 3"
359107 4"	359108 6"
Female Adapter, SOC x FPT
359800 1/2"	359801 3/4"	359803 1 1/4"	359804 1 1/2"
359805 2"
Female Adapter, SP x FPT
359820 1/2"	359821 3/4"	359822 1"
Flange x Socket
359228 1/2"	359229 3/4"	359230 1"	359231 1 1/4"
359232 1 1/2"	359233 2"	359040 2 1/2"	359234 2 1/2"
359041 3"	359235 3"	359043 4"	359236 4"
359042 6"	359238 6"
Coupling (Soc x Soc)
359132 1/2"	359133 3/4"	359134 1"	359135 1 1/4"
359136 1 1/2"	359137 2"	359138 2 1/2"	359139 3"
359140 4"	359141 6"
Male Adapter, SOC x MPT
359811 1/2"	359812 3/4"	359813 1"	359814 1 1/4"
359815 1 1/2"	359816 2"
Male Adapter, SP x MPT
359823 1/2"	359824 3/4"	359825 1"
Manifold Tee (¾" SPGx¾" SOC w/One ½" SOC Branches)
359061 3/4" x 1/2"
Manifold Tee (¾" SPGx¾" SOC w/Two ½" SOC Branches)
359060 3/4" x 1/2"
Reducer Bushing (Sp x Soc)
359375 3/4" x 1/2"	359376 1" x 1/2"	359377 1" x 3/4"	359378 1 1/4" x 1/2"
359379 1 1/4" x 3/4"	359380 1 1/4" x 1"	359381 1 1/2" x 1/2"	359382 1 1/2" x 3/4"
359383 1 1/2" x 1"	359384 1 1/2" x 1 1/4"	359385 2" x 1/2"	359386 2" x 3/4"
359387 2" x 1"	359388 2" x 1 1/4"	359389 2" x 1 1/2"	359390 2 1/2" x 3/4"
359391 2 1/2" x 1"	359392 2 1/2" x 2"	359393 3" x 1 1/2"	359394 3" x 2"
359395 3" x 2 1/2"	359428 4" x 1 1 /4"	359429 4" x 1 1/2"	359396 4" x 2"
359430 4" x 2 1/2"	359397 4" x 3"	359398 6" x 2"	359399 6" x 3"
359400 6" x 4"
Reducer Coupling (Soc x Soc)
359460 3/4" x 1/2"	359461 1" x 1/2"	359462 1" x 3/4"	359463 1 1/4" x 1"
359465 1 1/2" x 1"	359466 1 1/2" x 1 1/4"	359467 2" x 1"	359458 2" x 1 1/2"
359470 3" x 2"	359459 4" x 2"	359472 4" x 3"	359510 6" x 6" x 2"
359511 6" x 6" x 3"	359512 6" x 6" x 4"
Reducing Tee (S x S x S)
359513 3/4" x 1/2" x 3/4"	359514 3/4" x 1/2" x 1/2"	359492 3/4" x 3/4" x 1/2"	359493 1" x 1" x 1/2"
359494 1" x 1" x 3/4"	359495 1 1/4" x 1 1/4" x 1"	359515 1 1/2" x 1 1/2" x 1/2"	359496 1 1/2" x 1 1/2" x 3/4"
359497 1 1/2" x 1 1/2" x 1"	359498 2" x 2" x 1/2"	359499 2" x 2" x 3/4"	359500 2" x 2" x 1"
359501 2" x 2" x 1 1/2"	359503 2 1/2" x 2 1/2" x 1/2"	359504 2 1/2" x 2 1/2" x 3/4"	359505 2 1/2" x 2 1/2" x 1"
359506 2 1/2" x 2 1/2" x 1 1/4"	359507 2 1/2" x 2 1/2" x 2"	359502 3" x 3" x 2"	359508 4" x 4" x 2"
359509 4" x 4" x 3"
Tee (Soc x Soc x Soc)
359481 1/2"	359482 3/4"	359483 1"	359484 1 1/4"
359485 1 1/2"	359486 2"	359487 2 1/2"	359488 3"
359489 4"	359490 6"
Union (S x S)
359520 1/2"	359521 3/4"	359522 1"	359523 1 1/4"
359524 1 1/2"	359525 2"	359051 3"	359550 4"
Van Stone Style Flange 150 lbs.
359268 3"	359266 1 1/2"	359267 2"	359270 4"
~ Product is authorized to bear the cNSF Mark. [1] AquaRise pipe and fittings are certified as a system to CAN/ULC S102.2. [2] Flame Spread Value (FSV) <=25 Smoke Developed Value (SDV) <=50 [3] Product may be marked with the "IPEX" trade name only.
Pipe~ [1] [2] [3]	CPVC 4120	IPEX (Aquarise)	CAN/ULC S102.2
1/2" - 6" SDR 11
1 1/2" - 6" SDR 21
~ Product is authorized to bear the cNSF Mark. [1] AquaRise pipe and fittings are certified as a system to CAN/ULC S102.2. [2] Flame Spread Value (FSV) <=25 Smoke Developed Value (SDV) <=50 [3] Product may be marked with the "IPEX" trade name only.
Fitting Compounds[2]	CPVC 4120	AquaRise	CAN/ULC S102.2
Nominal 2.7 to 20 mm thick
[2] Flame Spread Value (FSV) <=25 Smoke Developed Value (SDV) <=50
Pipe Compound[2]	CPVC 4120	AquaRise	CAN/ULC S102.2
Nominal 1.9 to 17 mm thick
[2] Flame Spread Value (FSV) <=25 Smoke Developed Value (SDV) <=50

NOTE: Only products bearing the NSF Mark are NSF Certified.

IPEX USA LLC
3 Place Du Commerce, Suite 101
Verdun, QC H3E 1H7
Canada
514-769-2200
Visit this company's website

Facility : Ft. Pierce, FL

Surface Burning Characteristics of Building Materials

Product Type	Material Type	Trade Name	Product Standard
Pipe~ [1] [2]	PVC	IPEX	CAN/ULC S102.2
1/2" - 12" Sch 40
1/2" - 8" Sch 80
~ Product is authorized to bear the cNSF Mark. [1] Approved for a thickness of 3 mm - 14mm. [2] Flame Spread Value (FSV) =10 Smoke Developed Value (SDV) =195
Pipe~ [1] [2]	PVC	Xirtec PVC	CAN/ULC S102.2
1/2" - 12" Sch 40
1/2" - 8" Sch 80
~ Product is authorized to bear the cNSF Mark. [1] Approved for a thickness of 3 mm - 14mm. [2] Flame Spread Value (FSV) =10 Smoke Developed Value (SDV) =195
Pipe~ [1] [2]	PVC	Silver-Line	CAN/ULC S102.2
1/2" - 12" Sch 40
1/2" - 8" Sch 80
~ Product is authorized to bear the cNSF Mark. [1] Approved for a thickness of 3 mm - 14mm. [2] Flame Spread Value (FSV) =10 Smoke Developed Value (SDV) =195

Facility : Asheville, NC

Surface Burning Characteristics of Building Materials

Product Type	Material Type	Trade Name	Product Standard
Pipe~ [1] [2]	PVC	IPEX	CAN/ULC S102.2
1/2" - 12" Sch 40
1/2" - 8" Sch 80
~ Product is authorized to bear the cNSF Mark. [1] Approved for a thickness of 3 mm - 14mm. [2] Flame Spread Value (FSV) =10 Smoke Developed Value (SDV) =195
Pipe~ [1] [2]	PVC	Xirtec PVC	CAN/ULC S102.2
1/2" - 12" Sch 40
1/2" - 8" Sch 80
~ Product is authorized to bear the cNSF Mark. [1] Approved for a thickness of 3 mm - 14mm. [2] Flame Spread Value (FSV) =10 Smoke Developed Value (SDV) =195
Pipe~ [1] [2]	PVC	RadonX	CAN/ULC S102.2
4" Sch 40
~ Product is authorized to bear the cNSF Mark. [1] Approved for a thickness of 3 mm - 14mm. [2] Flame Spread Value (FSV) =10 Smoke Developed Value (SDV) =195
Pipe~ [1] [2]	PVC	Silver-Line	CAN/ULC S102.2
1/2" - 12" Sch 40
1/2" - 8" Sch 80
~ Product is authorized to bear the cNSF Mark. [1] Approved for a thickness of 3 mm - 14mm. [2] Flame Spread Value (FSV) =10 Smoke Developed Value (SDV) =195

Facility : Pineville, NC

Surface Burning Characteristics of Building Materials

Product Type	Material Type	Trade Name	Product Standard
Fittings~ [1] [2]	CPVC	System 636	CAN/ULC S102.2
45 Elbow H x H
2"	3"	4"	6"
8"	10"	12"
45 Elbow SP x H
4"
45 Wye H x H x H
6" x 6" x 4"	8" x 8" x 4"	10" x 10" x 4"	12" x 12" x 4"
45 Wye H x H x H x H
6" x 6" x 4"
90 Elbow SP x H
4"
90 Elbows HxH
2"	2" Long	3"	3" Long
4"	4" Long	6"	6" Long
8"	8" Long	10"	12"
Coupling H x SP
2"	3"	4"
Coupling SP x SP
2"	3"	4"
Couplings H x H
1 1/2"	2"	2 1/2"	3"
4"	6"	8"	10"
12"
End Caps
6"	8"	10"	12"
Female Adapter
2"
Plug MPT
1/2"
Reducer Bushing SP x Barb
1 1/2" x 1 1/2"
Reducer Bushing SP x FPT
2" x 1/2"
Reducer Bushings SP x H
1 1/2" x 1/2"	2" x 1/2"	2" x 3/4''	2" x 1 1/2"
3" x 2''	3" x 2'' Hex	3" x 2 1/2"	4" x 2"
6" x 4"	8" x 6"
Reducer Couplings H x H
3" x 2''	4" x 3"	4" x 6"
Tees H x H x 1/2" NPT
1 1/2"	2"	3"	4"
Tees H x H x H
2"	3"	3" x 2"	3" x 3" x 2"
4"	4" x 2"	4" x 4" x 2"	6"
6" x 6" x 4"	6" x 6" x 6"	8"	8" x 8" x 6"
Custom Assemblies
Bosch 6" x Metric Adapter	Bosch 8" x Metric Adapter	CPVC 3" Tee	CPVC 4" Tee
CPVC Reducer bushing 8" x 6"	Lochinvar – 2" Flue Connector	Lochinvar – 3" Flue Connector	Lochinvar - Appliance Adaptor 2", 3", 4"
Viessmann - 2" Adapter Coupling	Viessmann - 3" Adapter Coupling	Viessmann - 4" Adapter Coupling
~ Product is authorized to bear the cNSF Mark. [1] System 636 pipe and fittings are certified as a system to CAN/ULC S102.2. [2] Flame Spread Value (FSV) <=25 Smoke Developed Value (SDV) <=50
Pipe~ [1] [2]	CPVC	System 636	CAN/ULC S102.2
1 1/2"	2"	2 1/2"	3"
4"	6"	8"	10"
12"
~ Product is authorized to bear the cNSF Mark. [1] System 636 pipe and fittings are certified as a system to CAN/ULC S102.2. [2] Flame Spread Value (FSV) <=25 Smoke Developed Value (SDV) <=50

Facility : Lawton, OK

Surface Burning Characteristics of Building Materials

Product Type	Material Type	Trade Name	Product Standard
Pipe~ [1] [2]	PVC	IPEX	CAN/ULC S102.2
1/2" - 12" Sch 40
1/2" - 8" Sch 80
~ Product is authorized to bear the cNSF Mark. [1] Approved for a thickness of 3 mm - 14mm. [2] Flame Spread Value (FSV) =10 Smoke Developed Value (SDV) =195
Pipe~ [1] [2]	PVC	Xirtec PVC	CAN/ULC S102.2
1/2" - 12" Sch 40
1/2" - 8" Sch 80
~ Product is authorized to bear the cNSF Mark. [1] Approved for a thickness of 3 mm - 14mm. [2] Flame Spread Value (FSV) =10 Smoke Developed Value (SDV) =195
Pipe~ [1] [2]	PVC	Silver-Line	CAN/ULC S102.2
1/2" - 12" Sch 40
1/2" - 8" Sch 80
~ Product is authorized to bear the cNSF Mark. [1] Approved for a thickness of 3 mm - 14mm. [2] Flame Spread Value (FSV) =10 Smoke Developed Value (SDV) =195

J-M Manufacturing Co., Inc. DBA JM Eagle
9 Peach Tree Hill Road
Livingston, NJ 07039
United States
310-693-8200
Visit this company's website

Facility : # 4 Columbia, MO

Fire Main - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe# + [G]	PVCO	J-M Manufacturing	UL 1285
PC 235: 6", 8", 10", 12"
PC 305: 6", 8"
# This product may be marked with an alternate trade name: J-M Manufacturing, PW Eagle, [JMM Logo] or [JM Eagle Logo]. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.

NOTE: Only products bearing the NSF Mark are Certified.

Facility : # 6 Fontana, CA

Fire Main - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe# + [G]	PVCO	J-M Manufacturing	UL 1285
PC 305: 6", 8", 10", 12", 14", 16", 18", 20", 24"
PC 235: 6", 8", 10", 12", 14", 16", 18", 20", 24"
# This product may be marked with an alternate trade name: J-M Manufacturing, PW Eagle, [JMM Logo] or [JM Eagle Logo]. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.

Facility : # 9 Magnolia, AR

Fire Main - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe+ ^	PE 4710	J-M Manufacturing	FM 1613
PC 335: IPS 4" - 12" DR 7
PC 250: IPS 4" - 12" DR 9
PC 200: IPS 4" - 12" DR 11
PC 335: DIOD 4" - 12" DR 7
PC 250: DIOD 4" - 12" DR 9
PC 200: DIOD 4" - 12" DR 11
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ^ This product may be marked with an alternate trade name: JM Eagle, [JM Eagle Logo] and/or [JMM Logo].

Facility : # 17 Tulsa, OK

Fire Main - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe+ ^	PE 4710	J-M Manufacturing	FM 1613
PC 335: IPS 4" - 24" DR 7
PC 250: IPS 4" - 24" DR 9
PC 200: IPS 4" - 24" DR 11
PC 335: DIOD 4" - 24" DR 7
PC 250: DIOD 4" - 24" DR 9
PC 200: DIOD 4" - 24" DR 11
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ^ This product may be marked with an alternate trade name: JM Eagle, [JM Eagle Logo] and/or [JMM Logo].

Facility : # 19 Wharton, TX

Fire Main - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe# + [G]	PVCO	J-M Manufacturing	UL 1285
PC 165: 16"
PC 235: 6", 8", 10", 12"
PC 305: 6", 8"
# This product may be marked with an alternate trade name: J-M Manufacturing, PW Eagle, [JMM Logo] or [JM Eagle Logo]. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.

NOTE: Only products bearing the NSF Mark are Certified.

John L Schultz Ltd.
1723 55é Avenue
Dorval, QC H9P 2W3
Canada
800-363-6240

Facility : Guangdong, China

Surface Burning Characteristics of Building Materials

Product Type	Material Type	Trade Name	Product Standard
Tubing# $ [1] [2]*	PEX	aqua-dynamic	ASTM E84
3/8", 1/2" - 2"
# The Flame Spread Index and Smoke Developed Index for 1/2"-2" tubing are based on when tubing is field insulated with 1/2" JM Microlok HP Hi performance fiberglass insulation as per RIFENG installation instructions. The 3/8" tubing is not insulated. $ Certified for blue, natural, red, and white without oxygen barrier. * Flame Spread Index and Smoke Developed Index based on minimum spacing of 18 inches between tubing runs. Tubing shall be marked [NSF®-fs ASTM E84 FS<=25/SD<=50]. [1] ASTM E84, 1/2'' - 2'' The Flame Spread Index and Smoke Developed Index for 1/2"-2" tubing are based on when tubing is field insulated with 1/2" JM Microlok HP Hi performance fiberglass insulation as per RIFENG installation instructions. The 3/8" tubing is not insulated. [2] Flame Spread Index <= 25 Smoke Developed Index <= 50
Tubing$ & [2] [3]	PEX	aqua-dynamic	CAN/ULC S102.2
3/8", 1/2" - 2"
$ Certified for blue, natural, red, and white without oxygen barrier. & 3/8" tubing (without insulation) shall be marked [cNSF®-fs ULc S102.2 FS <=25/SD <=50]. 1/2" - 2" tubing (with insulation), Flame Spread Index and Smoke Developed Index based on when the tubing is field insulated with JM Microlok HP Hi Performance Fiberglass insulation as per the pipe manufacturer's installation instructions. Tubing shall be Marked [cNSF®-fs ULc S102.2 FS<=25/SD<=50]. [2] Flame Spread Index <= 25 Smoke Developed Index <= 50 [3] 3/8" Tubing (without insulation) Tubing shall be marked [cNSF®-fs ULc S102.2 FS<=25/SD<=50]. 1/2" through 2" Tubing (with insulation) Flame Spread Rating and Smoke Developed Classification based on when the tubing is field insulated with JM Microlok HP Hi Performance Fiberglass insulation as per the pipe manufacturer's installation instructions. Tubing shall be marked [cNSF®-fs ULc S102.2 FS<=25/SD<=50].
Tubing[4] [5]	PEX	aqua-dynamic	ASTM E84
3/8" - 2"[2]
[2] Flame Spread Index <= 25 Smoke Developed Index <= 50 [4] Certified for red and white PEX 5106 monowall pipe. [5] The Flame Spread Index and Smoke Developed Index are based on when tubing is field insulated with 1/2" JM Microlok HP Hi performance fiberglass insulation as per RIFENG installation instructions. Flame Spread Index and Smoke Developed Index based on minimum spacing of 18 inches between tubing runs. Tubing shall be marked [NSF®-fs ASTM E84 FS<=25/SD<=50].
Tubing[4] [6]	PEX	aqua-dynamic	CAN/ULC S102.2
3/8" - 2"[2]
[2] Flame Spread Index <= 25 Smoke Developed Index <= 50 [4] Certified for red and white PEX 5106 monowall pipe. [6] The Flame Spread Index and Smoke Developed Index are based on when the tubing is field insulated with 1/2" JM Microlok HP Hi Performance Fiberglass insulation as per the pipe manufacturer's installation instructions. Tubing shall be Marked [cNSF®-fs ULc S102.2 FS<=25/SD<=50].
Tubing[7] [8]	PEX	aqua-dynamic	ASTM E84
3/8" - 1"[2]
[2] Flame Spread Index <= 25 Smoke Developed Index <= 50 [7] Certified for blue, red and white PEX 5106 & 5306 2-layer skinned and 4-layer barrier pipe. [8] The Flame Spread Index and Smoke Developed Index are based on when tubing is field insulated with 1/2" JM Microlok HP Hi performance fiberglass insulation as per RIFENG installation instructions (all listed construction/color/size combinations greater than or equal to 3/8" in diameter). Flame Spread Index and Smoke Developed Index based on minimum spacing of 18 inches between tubing runs. Tubing shall be marked [NSF®-fs ASTM E84 FS<=25/SD<=50].
Tubing[7] [9]	PEX	aqua-dynamic	CAN/ULC S102.2
3/8" - 1"[2]
[2] Flame Spread Index <= 25 Smoke Developed Index <= 50 [7] Certified for blue, red and white PEX 5106 & 5306 2-layer skinned and 4-layer barrier pipe. [9] The Flame Spread Index and Smoke Developed Index are based on when the tubing is field insulated with 1/2" JM Microlok HP Hi Performance Fiberglass insulation as per the pipe manufacturer's installation instructions (all listed construction/color/size combinations greater than or equal to 3/8" in diameter). Tubing shall be Marked [cNSF®-fs ULc S102.2 FS<=25/SD<=50].
Tubing[5] [10]	PEX	aqua-dynamic PEX-A	ASTM E84
1/8" - 3"[2]
[2] Flame Spread Index <= 25 Smoke Developed Index <= 50 [5] The Flame Spread Index and Smoke Developed Index are based on when tubing is field insulated with 1/2" JM Microlok HP Hi performance fiberglass insulation as per RIFENG installation instructions. Flame Spread Index and Smoke Developed Index based on minimum spacing of 18 inches between tubing runs. Tubing shall be marked [NSF®-fs ASTM E84 FS<=25/SD<=50]. [10] Certified for Natural non-barrier single layer tubing for 1/8 - 3" sizes. Certified for red, white, blue 2-layer tubing for 1/2", 5/8" 3/4", 1" sizes only.
Tubing[6] [10]	PEX	aqua-dynamic PEX-A	CAN/ULC S102.2
1/8" - 3"[2]
[2] Flame Spread Index <= 25 Smoke Developed Index <= 50 [6] The Flame Spread Index and Smoke Developed Index are based on when the tubing is field insulated with 1/2" JM Microlok HP Hi Performance Fiberglass insulation as per the pipe manufacturer's installation instructions. Tubing shall be Marked [cNSF®-fs ULc S102.2 FS<=25/SD<=50]. [10] Certified for Natural non-barrier single layer tubing for 1/8 - 3" sizes. Certified for red, white, blue 2-layer tubing for 1/2", 5/8" 3/4", 1" sizes only.
Tubing[5] [11]	PEX	aqua-dynamic PEX-A	ASTM E84
1/8" - 3"[2]
[2] Flame Spread Index <= 25 Smoke Developed Index <= 50 [5] The Flame Spread Index and Smoke Developed Index are based on when tubing is field insulated with 1/2" JM Microlok HP Hi performance fiberglass insulation as per RIFENG installation instructions. Flame Spread Index and Smoke Developed Index based on minimum spacing of 18 inches between tubing runs. Tubing shall be marked [NSF®-fs ASTM E84 FS<=25/SD<=50]. [11] Certified for Natural non-barrier single layer tubing for 1/8 - 3" sizes. Certified for red, white, blue 2-layer tubing for 1/2", 5/8", 3/4", 1" sizes only. Certified for red, white, blue, orange, natural 3-layer tubing for 1/2", 5/8", 3/4", 1" sizes only.
Tubing[6] [11]	PEX	aqua-dynamic PEX-A	CAN/ULC S102.2
1/8" - 3"[2]
[2] Flame Spread Index <= 25 Smoke Developed Index <= 50 [6] The Flame Spread Index and Smoke Developed Index are based on when the tubing is field insulated with 1/2" JM Microlok HP Hi Performance Fiberglass insulation as per the pipe manufacturer's installation instructions. Tubing shall be Marked [cNSF®-fs ULc S102.2 FS<=25/SD<=50]. [11] Certified for Natural non-barrier single layer tubing for 1/8 - 3" sizes. Certified for red, white, blue 2-layer tubing for 1/2", 5/8", 3/4", 1" sizes only. Certified for red, white, blue, orange, natural 3-layer tubing for 1/2", 5/8", 3/4", 1" sizes only.

Mexichem Colombia SAS
Autopista Sur No. 71-75
Bogota
Colombia
57 1 782 5000

Facility : Bogota, Colombia

Surface Burning Characteristics of Building Materials

Product Type

Material Type

Trade Name

Product Standard

Tubing* ^

CPVC

Tuberia Presion HotPro CPVC

ASTM E84

* Flame Spread Index and Smoke Developed Index based on minimum spacing of 18 inches
  between tubing runs.  Tubing shall be marked [NSF®-fs ASTM E84 FS<=25/SD<=50].
^ Flame Spread Index <= 25, Smoke Developed Index <= 50

MrPEX Systems (a division of Safelink Systems, Inc.)
14799 Jackal Street NW
Suite 100
Ramsey, MN 55303
United States
800-716-3406
952-440-7704

Facility : Ulricehamn, Sweden

Surface Burning Characteristics of Building Materials

Product Type	Material Type	Trade Name	Product Standard
Tubing§ * [1]*	PEX	Mr. PEX (3-layer and 4-layer Tubing)	ASTM E84
1/2", 5/8", 3/4"
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. ** Flame Spread Index and Smoke Developed Index based on minimum spacing of 18 inches between tubing runs. Tubing shall be marked [NSF®-fs ASTM E84 FS<=25/SD<=50]. [1] Flame Spread Index <= 25 Smoke Developed Index <= 50

National Pipe & Plastics, Inc.
One North Page Avenue
Endicott, NY 13760
United States
800-836-4350
607-729-9381
Visit this company's website

Facility : Endicott, NY

Fire Main - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe	PVC	Dura-Blue	UL 1285
PC 305 4",6",8", 10", 12", 14", 16", 18", 20", 24" DR 14
PC 235 4",6",8", 10", 12", 14", 16", 18", 20", 24" DR 18
PC 200 14", 16", 18", 20", 24" DR 21
PC 165 4",6",8", 10", 12", 14", 16", 18", 20", 24" DR 25
PC 125 14", 16", 18", 20", 24" DR 32.5
Pipe	PVC	National	FM 1612
PC 250: 4", 6", 8", 10", 12" DR 14
PC 185: 4", 6", 8", 10", 12" DR 18

Facility : Colfax, NC

Fire Main - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe	PVC	Dura-Blue	UL 1285
PC305 4",6", 8", 10", 12", 14", 16", 18", 20", 24" DR 14
PC235 4",6", 8", 10", 12", 14", 16", 18", 20", 24" DR 18
PC200 14", 16", 18", 20", 24" DR 21
PC165 4",6", 8", 10", 12", 14", 16", 18", 20", 24" DR 25
PC125 14", 16", 18", 20", 24" DR 32.5
Pipe	PVC	National	FM 1612
PC 250: 4", 6", 8", 10", 12" DR 14
PC 185: 4", 6", 8", 10", 12" DR 18

PPI America Inc.
1440 Renaissance Drive
Suite 430
Park Ridge, IL 60068
United States
847-430-4477
Visit this company's website

Facility : # 1 Korea

Fire Main - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Fittings#	MLTPL	iPVC fitting	UL 1285
PC 235: 4", 6", 8"
PC 305: 4", 6", 8"
# Certified for PC 235 & PC 305 for the following configurations: iPVC Fitting-a Coupling (Socket) - 4", 6", & 8" 11.25° Elbow - 4", 6", & 8" 22.5° Elbow - 4", 6", & 8" 45° Elbow - 4", 6", & 8" 90° Elbow - 4", 6", & 8" Reducer Socket - 6" x 4", 8" x 4", & 8" x 6" Tee - 4", 6", 8", 6" x 4", 8" x 4", & 8" x 6" Flange socket - 6" & 8" iPVC Fitting Coupling(Socket) - 6", & 8" Repair Coupling(Socket) - 6", & 8" 11.25 Elbow - 6", & 8" 22.5 Elbow - 6", & 8" 45 Elbow - 6", & 8" 90 Elbow - 6", & 8" Reducer Socket - 8" x 6" Tee - 6", 8", & 8" x 6" Flange Tee - 6", 8", 6" x 4", 8" x 6", & 8" x 4" Flange socket - 6", & 8"
Fittings#	MLTPL	iPVC fitting-a	UL 1285
# Certified for PC 235 & PC 305 for the following configurations: iPVC Fitting-a Coupling (Socket) - 4", 6", & 8" 11.25° Elbow - 4", 6", & 8" 22.5° Elbow - 4", 6", & 8" 45° Elbow - 4", 6", & 8" 90° Elbow - 4", 6", & 8" Reducer Socket - 6" x 4", 8" x 4", & 8" x 6" Tee - 4", 6", 8", 6" x 4", 8" x 4", & 8" x 6" Flange socket - 6" & 8" iPVC Fitting Coupling(Socket) - 6", & 8" Repair Coupling(Socket) - 6", & 8" 11.25 Elbow - 6", & 8" 22.5 Elbow - 6", & 8" 45 Elbow - 6", & 8" 90 Elbow - 6", & 8" Reducer Socket - 8" x 6" Tee - 6", 8", & 8" x 6" Flange Tee - 6", 8", 6" x 4", 8" x 6", & 8" x 4" Flange socket - 6", & 8"
Pipe	PVC	iPVC Water Pipe	UL 1285
PC 235: 4" - 18"
PC 305: 4" - 16"
Pipe	PVC	Pyungwha PVC Pipe	UL 1285
PC 235: 4" - 16"
PC 305: 4" - 16"
Pipe	PVC	PVC Water Pipe	UL 1285
PC 235: 4" - 16"
PC 305: 4" - 16"
Pipe+	PVC	iPVC Water Pipe	FM 1612
14" - 16" DR 14 PC 305 and DR 18 PC 235
4" - 12" DR 14 PC 250 and DR 18 PC 185
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
Pipe+	PVC	Pyungwha PVC Pipe	FM 1612
14" - 16" DR 14 PC 305 and DR 18 PC 235
4" - 12" DR 14 PC 250 and DR 18 PC 185
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
Pipe+	PVC	PVC Water Pipe	FM 1612
14" - 16" DR 14 PC 305 and DR 18 PC 235
4" - 12" DR 14 PC 250 and DR 18 PC 185
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.

PPI PIPE Co., Ltd.
1085-11, Beodeul-ro, Jangan-myeon
Hwaseong-si, Gyeonggi-do 445-941
Korea, Republic of
82 31 359 0082
Visit this company's website

Facility : # 1 Gyeonggi-do, Republic of Korea

Fire Main - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Fittings#	MLTPL	iPVC fitting	UL 1285
PC 235: 4", 6", 8"
PC 305: 4", 6", 8"
# Certified for PC 235 & PC 305 for the following configurations: iPVC Fitting-a Coupling (Socket) - 4", 6", & 8" 11.25° Elbow - 4", 6", & 8" 22.5° Elbow - 4", 6", & 8" 45° Elbow - 4", 6", & 8" 90° Elbow - 4", 6", & 8" Reducer Socket - 6" x 4", 8" x 4", & 8" x 6" Tee - 4", 6", 8", 6" x 4", 8" x 4", & 8" x 6" Flange socket - 6" & 8" iPVC Fitting Coupling(Socket) - 6", & 8" Repair Coupling(Socket) - 6", & 8" 11.25 Elbow - 6", & 8" 22.5 Elbow - 6", & 8" 45 Elbow - 6", & 8" 90 Elbow - 6", & 8" Reducer Socket - 8" x 6" Tee - 6", 8", & 8" x 6" Flange Tee - 6", 8", 6" x 4", 8" x 6", & 8" x 4" Flange socket - 6", & 8"
Fittings#	MLTPL	iPVC fitting-a	UL 1285
# Certified for PC 235 & PC 305 for the following configurations: iPVC Fitting-a Coupling (Socket) - 4", 6", & 8" 11.25° Elbow - 4", 6", & 8" 22.5° Elbow - 4", 6", & 8" 45° Elbow - 4", 6", & 8" 90° Elbow - 4", 6", & 8" Reducer Socket - 6" x 4", 8" x 4", & 8" x 6" Tee - 4", 6", 8", 6" x 4", 8" x 4", & 8" x 6" Flange socket - 6" & 8" iPVC Fitting Coupling(Socket) - 6", & 8" Repair Coupling(Socket) - 6", & 8" 11.25 Elbow - 6", & 8" 22.5 Elbow - 6", & 8" 45 Elbow - 6", & 8" 90 Elbow - 6", & 8" Reducer Socket - 8" x 6" Tee - 6", 8", & 8" x 6" Flange Tee - 6", 8", 6" x 4", 8" x 6", & 8" x 4" Flange socket - 6", & 8"
Pipe	PVC	iPVC Water Pipe	UL 1285
PC 235: 4" - 18"
PC 305: 4" - 16"
Pipe+	PVC	iPVC Water Pipe	FM 1612
14" - 16" DR 14 PC 305 and DR 18 PC 235
4" - 12" DR 14 PC 250 and DR 18 PC 185
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
Pipe	PVC	Pyungwha PVC Pipe	UL 1285
PC 235: 4" - 16"
PC 305: 4" - 16"
Pipe+	PVC	Pyungwha PVC Pipe	FM 1612
14" - 16" DR 14 PC 305 and DR 18 PC 235
4" - 12" DR 14 PC 250 and DR 18 PC 185
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
Pipe	PVC	PVC Water Pipe	UL 1285
PC 235: 4" - 16"
PC 305: 4" - 16"
Pipe+	PVC	PVC Water Pipe	FM 1612
14" - 16" DR 14 PC 305 and DR 18 PC 235
4" - 12" DR 14 PC 250 and DR 18 PC 185
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.

REHAU Construction LLC
1501 Edwards Ferry Road, N.E.
Leesburg, VA 20176
United States
800-247-9445
703-777-5255
Visit this company's website

Facility : # 1 Germany

Surface Burning Characteristics of Building Materials

Product Type	Material Type	Trade Name	Product Standard
Tubing[3] [4]	PEX	Raupex® White UV Shield	CAN/ULC S102.2
1/2" - 2"
[3] Flame Spread Value (FSV) <= 25; Smoke Developed Value (SDV) <= 50. [4] Flame Spread Index and Smoke Developed Index based on when tubing is field insulated with 1/2" Micro-lok HP Hi performance fiberglass insulation with Everloc+P/Everloc+ Fittings as per Rehau installation instructions. Tubing shall be marked [cNSF®-fs CAN/ULC S102.2 FS<=25/SD<=50].
Tubing[3] [4]	PEX	Raupex® Red UV Shield	CAN/ULC S102.2
1/2" - 2"
[3] Flame Spread Value (FSV) <= 25; Smoke Developed Value (SDV) <= 50. [4] Flame Spread Index and Smoke Developed Index based on when tubing is field insulated with 1/2" Micro-lok HP Hi performance fiberglass insulation with Everloc+P/Everloc+ Fittings as per Rehau installation instructions. Tubing shall be marked [cNSF®-fs CAN/ULC S102.2 FS<=25/SD<=50].
Tubing [1]*	PEX	Municipex®	ASTM E84
3/4" - 2"
* Flame Spread Index and Smoke Developed Index based on when tubing is field insulated with minimum 1/2" Microlok HP Hi performance fiberglass insulation as per Rehau installation instructions. [1] Flame Spread Index <= 25; Smoke Developed Index <= 50.
Tubing** [1]*	PEX	Municipex®	ASTM E84
3/4" - 2"
*** Flame Spread Index and Smoke Developed Index based on ASTM E84 Steiner tunnel modified using piping supported with a minimum length of 48-inch Rehau pipe supports spaced a maximum distance of 10-inches between each Rehau Pipe Support Run. Tubing shall be marked [NSF®-fs ASTM E84 FS<=25/SD<=50]. [1] Flame Spread Index <= 25; Smoke Developed Index <= 50.
Tubing[2] [3]	PEX	Municipex®	CAN/ULC S102.2
3/4" - 2"
[2] Flame Spread Index and Smoke Developed Index based on when tubing is field insulated with minimum 1/2" JM Microlok or Armaflex insulation as per Rehau installation instructions. [3] Flame Spread Value (FSV) <= 25; Smoke Developed Value (SDV) <= 50.
Tubing [1]*	PEX	Raupex® O2 Barrier	ASTM E84
1/2" - 2"
* Flame Spread Index and Smoke Developed Index based on when tubing is field insulated with minimum 1/2" Microlok HP Hi performance fiberglass insulation as per Rehau installation instructions. [1] Flame Spread Index <= 25; Smoke Developed Index <= 50.
Tubing* [1]*	PEX	Raupex® O2 Barrier	ASTM E84
<= 1/2"
** Flame Spread Index and Smoke Developed Index based on minimum spacing of 18 inches between tubing runs with Everloc+P, Everloc+ fittings. Tubing shall be marked [NSF®-fs ASTM E84 FS<=25/SD<=50]. [1] Flame Spread Index <= 25; Smoke Developed Index <= 50.
Tubing[3]	PEX	Raupex® O2 Barrier	CAN/ULC S102.2
<= 1/2"
[3] Flame Spread Value (FSV) <= 25; Smoke Developed Value (SDV) <= 50.
Tubing[2] [3]	PEX	Raupex® O2 Barrier	CAN/ULC S102.2
5/8" - 2"
[2] Flame Spread Index and Smoke Developed Index based on when tubing is field insulated with minimum 1/2" JM Microlok or Armaflex insulation as per Rehau installation instructions. [3] Flame Spread Value (FSV) <= 25; Smoke Developed Value (SDV) <= 50.
Tubing [1]*	PEX	Raupex®	ASTM E84
1/2" - 2"
* Flame Spread Index and Smoke Developed Index based on when tubing is field insulated with minimum 1/2" Microlok HP Hi performance fiberglass insulation as per Rehau installation instructions. [1] Flame Spread Index <= 25; Smoke Developed Index <= 50.
Tubing* [1]*	PEX	Raupex®	ASTM E84
<= 3/4"
** Flame Spread Index and Smoke Developed Index based on minimum spacing of 18 inches between tubing runs with Everloc+P, Everloc+ fittings. Tubing shall be marked [NSF®-fs ASTM E84 FS<=25/SD<=50]. [1] Flame Spread Index <= 25; Smoke Developed Index <= 50.
Tubing** [1]*	PEX	Raupex®	ASTM E84
3/4" - 2"
*** Flame Spread Index and Smoke Developed Index based on ASTM E84 Steiner tunnel modified using piping supported with a minimum length of 48-inch Rehau pipe supports spaced a maximum distance of 10-inches between each Rehau Pipe Support Run. Tubing shall be marked [NSF®-fs ASTM E84 FS<=25/SD<=50]. [1] Flame Spread Index <= 25; Smoke Developed Index <= 50.
Tubing[3]	PEX	Raupex®	CAN/ULC S102.2
<= 1/2"
[3] Flame Spread Value (FSV) <= 25; Smoke Developed Value (SDV) <= 50.
Tubing[2] [3]	PEX	Raupex®	CAN/ULC S102.2
1/2" - 2"
[2] Flame Spread Index and Smoke Developed Index based on when tubing is field insulated with minimum 1/2" JM Microlok or Armaflex insulation as per Rehau installation instructions. [3] Flame Spread Value (FSV) <= 25; Smoke Developed Value (SDV) <= 50.
Tubing [1]*	PEX	Raupex® Blue UV Shield	ASTM E84
1/2" - 2"
* Flame Spread Index and Smoke Developed Index based on when tubing is field insulated with minimum 1/2" Microlok HP Hi performance fiberglass insulation as per Rehau installation instructions. [1] Flame Spread Index <= 25; Smoke Developed Index <= 50.
Tubing* [1]*	PEX	Raupex® Blue UV Shield	ASTM E84
<= 3/4"
** Flame Spread Index and Smoke Developed Index based on minimum spacing of 18 inches between tubing runs with Everloc+P, Everloc+ fittings. Tubing shall be marked [NSF®-fs ASTM E84 FS<=25/SD<=50]. [1] Flame Spread Index <= 25; Smoke Developed Index <= 50.
Tubing** [1]*	PEX	Raupex® Blue UV Shield	ASTM E84
3/4" - 2"
*** Flame Spread Index and Smoke Developed Index based on ASTM E84 Steiner tunnel modified using piping supported with a minimum length of 48-inch Rehau pipe supports spaced a maximum distance of 10-inches between each Rehau Pipe Support Run. Tubing shall be marked [NSF®-fs ASTM E84 FS<=25/SD<=50]. [1] Flame Spread Index <= 25; Smoke Developed Index <= 50.
Tubing[1] *****	PEX	Raupex® Blue UV Shield	ASTM E84
1/2" - 2"
[1] Flame Spread Index <= 25; Smoke Developed Index <= 50. ***** Flame Spread Index and Smoke Developed Index based on when tubing is field insulated with minimum 1/2" Micro-lok HP Hi performance fiberglass insulation with Everloc+P/Everloc+ Fittings as per Rehau installation instructions. Tubing shall be marked [NSF®-fs ASTM E84 FS<=25/SD<=50].
Tubing[3]	PEX	Raupex® Blue UV Shield	CAN/ULC S102.2
<= 1/2"
[3] Flame Spread Value (FSV) <= 25; Smoke Developed Value (SDV) <= 50.
Tubing[2] [3]	PEX	Raupex® Blue UV Shield	CAN/ULC S102.2
1/2" - 2"
[2] Flame Spread Index and Smoke Developed Index based on when tubing is field insulated with minimum 1/2" JM Microlok or Armaflex insulation as per Rehau installation instructions. [3] Flame Spread Value (FSV) <= 25; Smoke Developed Value (SDV) <= 50.
Tubing [1]*	PEX	Raupex® Red UV Shield	ASTM E84
1/2" - 2"
* Flame Spread Index and Smoke Developed Index based on when tubing is field insulated with minimum 1/2" Microlok HP Hi performance fiberglass insulation as per Rehau installation instructions. [1] Flame Spread Index <= 25; Smoke Developed Index <= 50.
Tubing[3] [4]	PEX	Raupex® Blue UV Shield	CAN/ULC S102.2
1/2" - 2"
[3] Flame Spread Value (FSV) <= 25; Smoke Developed Value (SDV) <= 50. [4] Flame Spread Index and Smoke Developed Index based on when tubing is field insulated with 1/2" Micro-lok HP Hi performance fiberglass insulation with Everloc+P/Everloc+ Fittings as per Rehau installation instructions. Tubing shall be marked [cNSF®-fs CAN/ULC S102.2 FS<=25/SD<=50].
Tubing* [1]*	PEX	Raupex® Red UV Shield	ASTM E84
<= 3/4"
** Flame Spread Index and Smoke Developed Index based on minimum spacing of 18 inches between tubing runs with Everloc+P, Everloc+ fittings. Tubing shall be marked [NSF®-fs ASTM E84 FS<=25/SD<=50]. [1] Flame Spread Index <= 25; Smoke Developed Index <= 50.
Tubing** [1]*	PEX	Raupex® Red UV Shield	ASTM E84
3/4" - 2"
*** Flame Spread Index and Smoke Developed Index based on ASTM E84 Steiner tunnel modified using piping supported with a minimum length of 48-inch Rehau pipe supports spaced a maximum distance of 10-inches between each Rehau Pipe Support Run. Tubing shall be marked [NSF®-fs ASTM E84 FS<=25/SD<=50]. [1] Flame Spread Index <= 25; Smoke Developed Index <= 50.
Tubing[1] *****	PEX	Raupex® Red UV Shield	ASTM E84
1/2" - 2"
[1] Flame Spread Index <= 25; Smoke Developed Index <= 50. ***** Flame Spread Index and Smoke Developed Index based on when tubing is field insulated with minimum 1/2" Micro-lok HP Hi performance fiberglass insulation with Everloc+P/Everloc+ Fittings as per Rehau installation instructions. Tubing shall be marked [NSF®-fs ASTM E84 FS<=25/SD<=50].
Tubing[3]	PEX	Raupex® Red UV Shield	CAN/ULC S102.2
<= 1/2"
[3] Flame Spread Value (FSV) <= 25; Smoke Developed Value (SDV) <= 50.
Tubing[2] [3]	PEX	Raupex® Red UV Shield	CAN/ULC S102.2
1/2" - 2"
[2] Flame Spread Index and Smoke Developed Index based on when tubing is field insulated with minimum 1/2" JM Microlok or Armaflex insulation as per Rehau installation instructions. [3] Flame Spread Value (FSV) <= 25; Smoke Developed Value (SDV) <= 50.
Tubing [1]*	PEX	Raupex® White UV Shield	ASTM E84
1/2" - 2"
* Flame Spread Index and Smoke Developed Index based on when tubing is field insulated with minimum 1/2" Microlok HP Hi performance fiberglass insulation as per Rehau installation instructions. [1] Flame Spread Index <= 25; Smoke Developed Index <= 50.
Tubing* [1]*	PEX	Raupex® White UV Shield	ASTM E84
<= 3/4"
** Flame Spread Index and Smoke Developed Index based on minimum spacing of 18 inches between tubing runs with Everloc+P, Everloc+ fittings. Tubing shall be marked [NSF®-fs ASTM E84 FS<=25/SD<=50]. [1] Flame Spread Index <= 25; Smoke Developed Index <= 50.
Tubing** [1]*	PEX	Raupex® White UV Shield	ASTM E84
3/4" - 2"
*** Flame Spread Index and Smoke Developed Index based on ASTM E84 Steiner tunnel modified using piping supported with a minimum length of 48-inch Rehau pipe supports spaced a maximum distance of 10-inches between each Rehau Pipe Support Run. Tubing shall be marked [NSF®-fs ASTM E84 FS<=25/SD<=50]. [1] Flame Spread Index <= 25; Smoke Developed Index <= 50.
Tubing[1] *****	PEX	Raupex® White UV Shield	ASTM E84
1/2" - 2"
[1] Flame Spread Index <= 25; Smoke Developed Index <= 50. ***** Flame Spread Index and Smoke Developed Index based on when tubing is field insulated with minimum 1/2" Micro-lok HP Hi performance fiberglass insulation with Everloc+P/Everloc+ Fittings as per Rehau installation instructions. Tubing shall be marked [NSF®-fs ASTM E84 FS<=25/SD<=50].
Tubing[3]	PEX	Raupex® White UV Shield	CAN/ULC S102.2
<= 1/2"
[3] Flame Spread Value (FSV) <= 25; Smoke Developed Value (SDV) <= 50.
Tubing[2] [3]	PEX	Raupex® White UV Shield	CAN/ULC S102.2
1/2" - 2"
[2] Flame Spread Index and Smoke Developed Index based on when tubing is field insulated with minimum 1/2" JM Microlok or Armaflex insulation as per Rehau installation instructions. [3] Flame Spread Value (FSV) <= 25; Smoke Developed Value (SDV) <= 50.
Tubing[2] [3]	PEX	RAUGEO	CAN/ULC S102.2
1/2" - 2"
[2] Flame Spread Index and Smoke Developed Index based on when tubing is field insulated with minimum 1/2" JM Microlok or Armaflex insulation as per Rehau installation instructions. [3] Flame Spread Value (FSV) <= 25; Smoke Developed Value (SDV) <= 50.

Facility : # 7 USA

Surface Burning Characteristics of Building Materials

Product Type	Material Type	Trade Name	Product Standard
Tubing [1]*	PEX	Municipex®	ASTM E84
3/4" - 2"
* Flame Spread Index and Smoke Developed Index based on when tubing is field insulated with minimum 1/2" Microlok HP Hi performance fiberglass insulation as per Rehau installation instructions. [1] Flame Spread Index <= 25; Smoke Developed Index <= 50.
Tubing** [1]*	PEX	Municipex®	ASTM E84
3/4" - 2"
*** Flame Spread Index and Smoke Developed Index based on ASTM E84 Steiner tunnel modified using piping supported with a minimum length of 48-inch Rehau pipe supports spaced a maximum distance of 10-inches between each Rehau Pipe Support Run. Tubing shall be marked [NSF®-fs ASTM E84 FS<=25/SD<=50]. [1] Flame Spread Index <= 25; Smoke Developed Index <= 50.
Tubing[2] [3]	PEX	Municipex®	CAN/ULC S102.2
3/4" - 2"
[2] Flame Spread Index and Smoke Developed Index based on when tubing is field insulated with minimum 1/2" JM Microlok or Armaflex insulation as per Rehau installation instructions. [3] Flame Spread Value (FSV) <= 25; Smoke Developed Value (SDV) <= 50.
Tubing [1]*	PEX	Municipex® Reclaim	ASTM E84
3/4" - 2"
* Flame Spread Index and Smoke Developed Index based on when tubing is field insulated with minimum 1/2" Microlok HP Hi performance fiberglass insulation as per Rehau installation instructions. [1] Flame Spread Index <= 25; Smoke Developed Index <= 50.
Tubing** [1]*	PEX	Municipex® Reclaim	ASTM E84
3/4" - 2"
*** Flame Spread Index and Smoke Developed Index based on ASTM E84 Steiner tunnel modified using piping supported with a minimum length of 48-inch Rehau pipe supports spaced a maximum distance of 10-inches between each Rehau Pipe Support Run. Tubing shall be marked [NSF®-fs ASTM E84 FS<=25/SD<=50]. [1] Flame Spread Index <= 25; Smoke Developed Index <= 50.
Tubing[2] [3]	PEX	Municipex® Reclaim	CAN/ULC S102.2
3/4" - 2"
[2] Flame Spread Index and Smoke Developed Index based on when tubing is field insulated with minimum 1/2" JM Microlok or Armaflex insulation as per Rehau installation instructions. [3] Flame Spread Value (FSV) <= 25; Smoke Developed Value (SDV) <= 50.
Tubing* [1]*	PEX	Raupex® O2 Barrier	ASTM E84
<= 1/2"
** Flame Spread Index and Smoke Developed Index based on minimum spacing of 18 inches between tubing runs with Everloc+P, Everloc+ fittings. Tubing shall be marked [NSF®-fs ASTM E84 FS<=25/SD<=50]. [1] Flame Spread Index <= 25; Smoke Developed Index <= 50.
Tubing [1]*	PEX	Raupex® O2 Barrier	ASTM E84
5/8" - 2"
* Flame Spread Index and Smoke Developed Index based on when tubing is field insulated with minimum 1/2" Microlok HP Hi performance fiberglass insulation as per Rehau installation instructions. [1] Flame Spread Index <= 25; Smoke Developed Index <= 50.
Tubing[3]	PEX	Raupex® O2 Barrier	CAN/ULC S102.2
<= 1/2"
[3] Flame Spread Value (FSV) <= 25; Smoke Developed Value (SDV) <= 50.
Tubing[2] [3]	PEX	Raupex® O2 Barrier	CAN/ULC S102.2
5/8" - 2"
[2] Flame Spread Index and Smoke Developed Index based on when tubing is field insulated with minimum 1/2" JM Microlok or Armaflex insulation as per Rehau installation instructions. [3] Flame Spread Value (FSV) <= 25; Smoke Developed Value (SDV) <= 50.
Tubing* [1]*	PEX	Raupex®	ASTM E84
<= 3/4"
** Flame Spread Index and Smoke Developed Index based on minimum spacing of 18 inches between tubing runs with Everloc+P, Everloc+ fittings. Tubing shall be marked [NSF®-fs ASTM E84 FS<=25/SD<=50]. [1] Flame Spread Index <= 25; Smoke Developed Index <= 50.
Tubing [1]*	PEX	Raupex®	ASTM E84
5/8" - 2"
* Flame Spread Index and Smoke Developed Index based on when tubing is field insulated with minimum 1/2" Microlok HP Hi performance fiberglass insulation as per Rehau installation instructions. [1] Flame Spread Index <= 25; Smoke Developed Index <= 50.
Tubing** [1]*	PEX	Raupex®	ASTM E84
3/4" - 2"
*** Flame Spread Index and Smoke Developed Index based on ASTM E84 Steiner tunnel modified using piping supported with a minimum length of 48-inch Rehau pipe supports spaced a maximum distance of 10-inches between each Rehau Pipe Support Run. Tubing shall be marked [NSF®-fs ASTM E84 FS<=25/SD<=50]. [1] Flame Spread Index <= 25; Smoke Developed Index <= 50.
Tubing[3]	PEX	Raupex®	CAN/ULC S102.2
<= 1/2"
[3] Flame Spread Value (FSV) <= 25; Smoke Developed Value (SDV) <= 50.
Tubing[2] [3]	PEX	Raupex®	CAN/ULC S102.2
5/8" - 2"
[2] Flame Spread Index and Smoke Developed Index based on when tubing is field insulated with minimum 1/2" JM Microlok or Armaflex insulation as per Rehau installation instructions. [3] Flame Spread Value (FSV) <= 25; Smoke Developed Value (SDV) <= 50.
Tubing* [1]*	PEX	Raupex® Blue UV Shield	ASTM E84
<= 3/4"
** Flame Spread Index and Smoke Developed Index based on minimum spacing of 18 inches between tubing runs with Everloc+P, Everloc+ fittings. Tubing shall be marked [NSF®-fs ASTM E84 FS<=25/SD<=50]. [1] Flame Spread Index <= 25; Smoke Developed Index <= 50.
Tubing [1]*	PEX	Raupex® Blue UV Shield	ASTM E84
5/8" - 2"
* Flame Spread Index and Smoke Developed Index based on when tubing is field insulated with minimum 1/2" Microlok HP Hi performance fiberglass insulation as per Rehau installation instructions. [1] Flame Spread Index <= 25; Smoke Developed Index <= 50.
Tubing** [1]*	PEX	Raupex® Blue UV Shield	ASTM E84
3/4" - 2"
*** Flame Spread Index and Smoke Developed Index based on ASTM E84 Steiner tunnel modified using piping supported with a minimum length of 48-inch Rehau pipe supports spaced a maximum distance of 10-inches between each Rehau Pipe Support Run. Tubing shall be marked [NSF®-fs ASTM E84 FS<=25/SD<=50]. [1] Flame Spread Index <= 25; Smoke Developed Index <= 50.
Tubing[1] ****	PEX	Raupex® Blue UV Shield	ASTM E84
1/2" - 2"
[1] Flame Spread Index <= 25; Smoke Developed Index <= 50. **** Flame Spread Index and Smoke Developed Index based on when tubing is field insulated with minimum 1/2" Micro-lok HP Hi performance fiberglass insulation with Everloc+P/Everloc+ Fittings as per Rehau installation instructions. Tubing shall be marked [NSF®-fs ASTM E84 FS<=25/SD<=50].
Tubing[3]	PEX	Raupex® Blue UV Shield	CAN/ULC S102.2
<= 1/2"
[3] Flame Spread Value (FSV) <= 25; Smoke Developed Value (SDV) <= 50.
Tubing[2] [3]	PEX	Raupex® Blue UV Shield	CAN/ULC S102.2
5/8" - 2"
[2] Flame Spread Index and Smoke Developed Index based on when tubing is field insulated with minimum 1/2" JM Microlok or Armaflex insulation as per Rehau installation instructions. [3] Flame Spread Value (FSV) <= 25; Smoke Developed Value (SDV) <= 50.
Tubing[3] [4]	PEX	Raupex® Blue UV Shield	CAN/ULC S102.2
1/2" - 2"
[3] Flame Spread Value (FSV) <= 25; Smoke Developed Value (SDV) <= 50. [4] Flame Spread Index and Smoke Developed Index based on when tubing is field insulated with 1/2" Micro-lok HP Hi performance fiberglass insulation with Everloc+P/Everloc+ Fittings as per Rehau installation instructions. Tubing shall be marked [cNSF®-fs CAN/ULC S102.2 FS<=25/SD<=50].
Tubing* [1]*	PEX	Raupex® Red UV Shield	ASTM E84
<= 3/4"
** Flame Spread Index and Smoke Developed Index based on minimum spacing of 18 inches between tubing runs with Everloc+P, Everloc+ fittings. Tubing shall be marked [NSF®-fs ASTM E84 FS<=25/SD<=50]. [1] Flame Spread Index <= 25; Smoke Developed Index <= 50.
Tubing [1]*	PEX	Raupex® Red UV Shield	ASTM E84
5/8" - 2"
* Flame Spread Index and Smoke Developed Index based on when tubing is field insulated with minimum 1/2" Microlok HP Hi performance fiberglass insulation as per Rehau installation instructions. [1] Flame Spread Index <= 25; Smoke Developed Index <= 50.
Tubing** [1]*	PEX	Raupex® Red UV Shield	ASTM E84
3/4" - 2"
*** Flame Spread Index and Smoke Developed Index based on ASTM E84 Steiner tunnel modified using piping supported with a minimum length of 48-inch Rehau pipe supports spaced a maximum distance of 10-inches between each Rehau Pipe Support Run. Tubing shall be marked [NSF®-fs ASTM E84 FS<=25/SD<=50]. [1] Flame Spread Index <= 25; Smoke Developed Index <= 50.
Tubing[1] ****	PEX	Raupex® Red UV Shield	ASTM E84
1/2" - 2"
[1] Flame Spread Index <= 25; Smoke Developed Index <= 50. **** Flame Spread Index and Smoke Developed Index based on when tubing is field insulated with minimum 1/2" Micro-lok HP Hi performance fiberglass insulation with Everloc+P/Everloc+ Fittings as per Rehau installation instructions. Tubing shall be marked [NSF®-fs ASTM E84 FS<=25/SD<=50].
Tubing[3]	PEX	Raupex® Red UV Shield	CAN/ULC S102.2
<= 1/2"
[3] Flame Spread Value (FSV) <= 25; Smoke Developed Value (SDV) <= 50.
Tubing[2] [3]	PEX	Raupex® Red UV Shield	CAN/ULC S102.2
5/8" - 2"
[2] Flame Spread Index and Smoke Developed Index based on when tubing is field insulated with minimum 1/2" JM Microlok or Armaflex insulation as per Rehau installation instructions. [3] Flame Spread Value (FSV) <= 25; Smoke Developed Value (SDV) <= 50.
Tubing[3] [4]	PEX	Raupex® Red UV Shield	CAN/ULC S102.2
1/2" - 2"
[3] Flame Spread Value (FSV) <= 25; Smoke Developed Value (SDV) <= 50. [4] Flame Spread Index and Smoke Developed Index based on when tubing is field insulated with 1/2" Micro-lok HP Hi performance fiberglass insulation with Everloc+P/Everloc+ Fittings as per Rehau installation instructions. Tubing shall be marked [cNSF®-fs CAN/ULC S102.2 FS<=25/SD<=50].
Tubing* [1]*	PEX	Raupex® White UV Shield	ASTM E84
<= 3/4"
** Flame Spread Index and Smoke Developed Index based on minimum spacing of 18 inches between tubing runs with Everloc+P, Everloc+ fittings. Tubing shall be marked [NSF®-fs ASTM E84 FS<=25/SD<=50]. [1] Flame Spread Index <= 25; Smoke Developed Index <= 50.
Tubing [1]*	PEX	Raupex® White UV Shield	ASTM E84
5/8" - 2"
* Flame Spread Index and Smoke Developed Index based on when tubing is field insulated with minimum 1/2" Microlok HP Hi performance fiberglass insulation as per Rehau installation instructions. [1] Flame Spread Index <= 25; Smoke Developed Index <= 50.
Tubing** [1]*	PEX	Raupex® White UV Shield	ASTM E84
3/4" - 2"
*** Flame Spread Index and Smoke Developed Index based on ASTM E84 Steiner tunnel modified using piping supported with a minimum length of 48-inch Rehau pipe supports spaced a maximum distance of 10-inches between each Rehau Pipe Support Run. Tubing shall be marked [NSF®-fs ASTM E84 FS<=25/SD<=50]. [1] Flame Spread Index <= 25; Smoke Developed Index <= 50.
Tubing[1] ****	PEX	Raupex® White UV Shield	ASTM E84
1/2" - 2"
[1] Flame Spread Index <= 25; Smoke Developed Index <= 50. **** Flame Spread Index and Smoke Developed Index based on when tubing is field insulated with minimum 1/2" Micro-lok HP Hi performance fiberglass insulation with Everloc+P/Everloc+ Fittings as per Rehau installation instructions. Tubing shall be marked [NSF®-fs ASTM E84 FS<=25/SD<=50].
Tubing[3]	PEX	Raupex® White UV Shield	CAN/ULC S102.2
<= 1/2"
[3] Flame Spread Value (FSV) <= 25; Smoke Developed Value (SDV) <= 50.
Tubing[2] [3]	PEX	Raupex® White UV Shield	CAN/ULC S102.2
5/8" - 2"
[2] Flame Spread Index and Smoke Developed Index based on when tubing is field insulated with minimum 1/2" JM Microlok or Armaflex insulation as per Rehau installation instructions. [3] Flame Spread Value (FSV) <= 25; Smoke Developed Value (SDV) <= 50.
Tubing[3] [4]	PEX	Raupex® White UV Shield	CAN/ULC S102.2
1/2" - 2"
[3] Flame Spread Value (FSV) <= 25; Smoke Developed Value (SDV) <= 50. [4] Flame Spread Index and Smoke Developed Index based on when tubing is field insulated with 1/2" Micro-lok HP Hi performance fiberglass insulation with Everloc+P/Everloc+ Fittings as per Rehau installation instructions. Tubing shall be marked [cNSF®-fs CAN/ULC S102.2 FS<=25/SD<=50].
Tubing[2] [3]	PEX	RAUGEO	CAN/ULC S102.2
3/4" - 2"
[2] Flame Spread Index and Smoke Developed Index based on when tubing is field insulated with minimum 1/2" JM Microlok or Armaflex insulation as per Rehau installation instructions. [3] Flame Spread Value (FSV) <= 25; Smoke Developed Value (SDV) <= 50.

Fire Sprinkler Pipe and Fitting Systems

Product Type	Material Type	Trade Name	Product Standard
Pipe and Fitting System% * [G]*	MLTPL	FIREPEX™ Residential Fire Sprinkler Systems	ANSI/CAN/UL 1821
90 Degree Elbow
3/4" x 3/4" (F209E66)	1" x 1" (F209E88)	1 1/4" x 1 1/4" (F20E10)
EVERLOC+ LF 45 DEG Elbow
1 1/2" x 1 1/2" (425021)	2" x 2" (425022)
EVERLOC+ LF Adapter
1/2" x 1/2" CF (317184)	3/4" x 3/4" MPT (317172)	3/4" x 3/4" FPT (317182)	3/4" x 3/4" CM (317186)
3/4" x 3/4" CF (317187) (499797)	3/4" x 1" MPT (317177)	3/4" x 1" CF (317189)	1" x 3/4" MPT (323708)
1" x 3/4" FPT (329227)	1" x 1" MPT (317178)	1" x 1" FPT (317183)	1" x 1" CM (317190)
1" x 1" CF (317191) (499800)	1 1/4" x 1 1/4" MPT (317179)	1 1/4" x 1 1/4" CM (317192)	1 1/4" x 1 1/4" CF (317193)
1 1/2" x 1 1/2" MPT (317180)	1 1/2" x 1 1/2" CM (317194)	1 1/2" x 2" CM or 1 1/2" CF (317195)	2" x 2" MPT (317181)
2" x 2" CM (317196)	2" x 2" CF (317197)
EVERLOC+ LF Coupling
1-1/4" x 3/4" (425026)	1-1/2" x 3/4" (425028)	2" x 3/4" (425031)	2" x 1" (317139)
2" x 1 1/4" (317140)	2" x 1 1/2" (317141)
EVERLOC+ LF Elbows
3/4" x 3/4" CM (317166)	3/4" (317167)	3/4" x 3/4" MPT (317169)	3/4" x 3/4" FPT (422006)
3/4"x 3/4" MPT (425476)	1" x 1" FPT (422007)
EVERLOC+ LF Tees
1 1/4" x 1" x 3/4" (424989)	1 1/4" x 1 1/4" x 1/2" (424991)	1 1/4" x 1 1/4" x 3/4" (322832)	1 1/2" x 1 1/4" x 1" (317153)
2" x 1 1/2" x 1 1/4" (317161)	1 1/2" x 1 1/4" x 1 1/2" (317145)	2" x 1 1/2" x 1 1/2" (317155)	1 1/2" x 1 1/2" x 3/4" (322833)
2" x 1 1/2" x 2" (317147)	1 1/2" x 1 1/2" x 1/2" (425024)	1 1/2" x 1 1/4" x 3/4" (425025)	1 1/2" x 1" x 3/4" (424992)
2" x 1 1/4" x 2" (317146)	2" x 2" x 3/4" (322834)	2" x 1 1/2" x 1" (317156)	2" x 1 1/2" x 3/4" (424994)
2" x 2" x 1/2" (424995)
EVERLOC+ Manifold Sweat Adapter
3/4" X 1" CF (326712)	1" X 1" CM (326713)
EVERLOC+ Polymer 45° Elbow
2” x 2”	1 ½” x 1 ½”
EVERLOC+ Polymer Coupling
1 ¼” x ¾” (435718)	1 ½” x 1 ¼” (435704)	1 ½” x ¾” (435705)	2” x 1 ¼”
2” x 1 ½” (435706)	2” x 1”
EVERLOC+P Coupling
3/4" x 3/4" (104825)	1" x 3/4" (104831)	1" x 1" (104826)	1 1/4" x 1" (104832)
1 1/4" x 1 1/4" (104827)	1 1/2" x 1" (104833)	1 1/2" x 1 1/2" (104828)	2" x 2" (104829)
EVERLOC+P Elbow
3/4" x 3/4" (104860)	1" x 1" (104861)	1 1/4" x 1 1/4" (104862)	1 1/2" x 1 1/2" (104863)
2" x 2" (104864)
EVERLOC+P Plug
3/4" (104857)	1" (104858)	1 1/4" (317158)	1 1/2" (317159)
2" (317160)
EVERLOC+P Tee
3/4" x 1/2" x 3/4" (104841)	3/4" x 3/4" x 3/4" (104836)	3/4" x 3/4" x 1" (104855)	1" x 3/4" x 3/4" (104852)
1" x 3/4" x 1" (104842)	1" x 1" x 1" (104837)	1 1/4" x 1" x 1" (104853)	1 1/4" x 1 1/4" x 1 1/4" (104838)
1 1/4" x 1 1/4" x 1" (104847)	1 1/2" x 1 1/2" x 1" (104848)	1 1/2" x 1 1/2" x 1 1/2" (104839)	2" x 2" x 1" (104849)
2" x 2" x 2" (104840)
EVERLOC+Sleeves
3/4" (104818)	1" (104819)	1 1/4" (104820)	1 1/2" (104821)
2" (104822)
Everloc+ Polymer Tee
1 ¼” x 1” x ¾”	2” x 2” x 1 ¼” (435714)	1 ¼” x 1 ¼” x ½” (435703)	1 ½” x 1” x ¾”
1 ½” x 1” x 1” (435719)	1 ½” x 1 ½” x 1 ¼” (435713)	2” x 1 ½” x ¾”	2” x 2” x 1 ½” (435710)
1 ½” x 1” 1 ½” (435709)	1 ½” x 1 ¼” x ¾” (435711)	2” x 1 ½” x 1”	2” x 1 ½” x 1 ¼”
1" x ¾” x ½” (435701)	1 ¼” x ¾” x ¾” (435715)	1 ½” x 1 ¼” x 1”	1 ½” x 1 ¼” x 1 ½”
2” x 1 ½” x 1 ½”	2” x 2” x ½”	1" x ½” x 1" (435809)	1 ½” x ¾” x 1 ½” (435716)
1 ½” x 1 ¼” x 1 ¼” (435720)	2” x 1 ¼” x 2”	2” x 1 ½” x 2”	1 ¼” x ¾” x 1 ¼” (435717)
1 ¼” x 1 ¼” x ¾” (435700)	1 ½” x 1 ½” x ½” (435707)	1 ½” x 1 ½” x ¾” (435702)	2” x 2” x ¾” (435721)
1 ¼” x 1” x 1 ¼” (435712)
Everloc+ Stub Ell
3/4" 8" (418668) (499364)	3/4" 8" with mounting plate (329229) (499307)	1" 8" (499365)
Male Threaded Adapter
3/4" x 3/4" (F96E66)	1" x 1" (F96E88)	1 1/4" x 1 1/4" (F96E1010)
Plug
3/4" F2080 (F103E6)	1" F2080 (F103E8)	1 1/4" F2080 (F103E10)
Reducing Coupling
3/4" x 1/2" (F95E64)	1 X 3/4" (F95E86)	1 1/4" X 1" (F95E108)
Sprinkler Elbows
3/4" x 1/2" FPT (422004)	1" x 1/2" FPT (422005)
Sprinkler Tees
3/4" x 3/4" x 1/2" FPT (421744)	1" x 1" x 1/2" FPT (421878)
Tees
3/4" x 1/2" x 1/2" [F208E644]	3/4" x 1/2" x 3/4" [F208E646]	3/4" x 3/4" x 1/2" [F208E664]	3/4" x 3/4" x 3/4" [F208E666]
1" x 1" x 3/4" [F208E886]	1" x 1" x 1" [F208E888]	1 1/4" x 3/4" x 1" [F208E1068]	1 1/4" x 1 1/4" x 3/4" [F208E10106]
1 1/4" x 1 1/4" x 1" [F208E10108]
Tubing
3/4" – 2" Raupex	3/4" - 2" Raupex White UV- Shield
% PEX pipe and fittings are intended for use in multi-purpose piping systems of residential occupancies as defined in ANSI/NFPA 13D, “Installation of Sprinkler Systems in One- and Two- Family Dwellings and Manufactured Homes" and the International Residential Code, Section P2904, and are designed to withstand a working pressure of not less than 130 psi at 120°F. PEX pipe and fittings are intended to be installed in accordance with the requirements specified in the manufacturer’s installation instructions and ANSI/NFPA 13D. Protection is intended to be provided for PEX pipe and fittings in multi-purpose piping systems unless otherwise stated in this listing and per the installation and design manual dated September 11, 2008. The minimum protection should consist of either (1) one layer of 3/8-in. gypsum wallboard, (2) a suspended membrane ceiling with lay-in panels or tiles having a weight of not less than 0.35 lbs per sq ft when installed with metallic support grids, OR (3) ½ in plywood. PEX pipe and fittings are intended for use in areas where the maximum ambient temperature does not exceed 120°F. These pipe and fittings are not intended to be installed in outdoor applications. The PEX pipe and fittings are intended for use in wet-pipe systems only and have not been evaluated for use in dry-pipe systems. Raupex pipe and fittings may also be installed without protection (exposed) in accordance with the limitations specified in this installation and design manual dated September 11, 2008. ** Pipe and fittings Certified as a system using installation and design manual titled "FIREPEX Residential Fire Sprinkler Systems". [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.

Facility : EU

Surface Burning Characteristics of Building Materials

Product Type	Material Type	Trade Name	Product Standard
Tubing[1] [2]	PEX	NEOPEX O2 Barrier	ASTM E84
1/2", 5/8", 3/4"
[1] Flame Spread Value (FSV) <= 25; Smoke Developed Value (SDV) <= 50. [2] 1/2", 5/8" 3/4" Flame Spread Index and Smoke Developed Index based on when tubing is field insulated with 1/2" Micro-lok HP Hi performance fiberglass insulation as per Rehau installation instructions. 1/2" Only: Flame Spread Index and Smoke Developed Index based on minimum spacing of 18 inches between tubing runs with Everloc+P, Everloc+ fittings. Tubing shall be marked [cNSF®-fs CAN/ULC S102.2 FS<=25/SD<=50].
Tubing[1] [3]	PEX	NEOPEX O2 Barrier	CAN/ULC S102.2
1/2", 5/8", 3/4"
[1] Flame Spread Value (FSV) <= 25; Smoke Developed Value (SDV) <= 50. [3] 1/2" - Non-insulated 5/8" & 3/4": Flame Spread Index and Smoke Developed Index based on when tubing is field instructions. insulated with minimum 1/2" JM Microlok or Armaflex insulation as per Rehau installation. Tubing shall be marked [cNSF®-fs CAN/ULC S102.2 FS<=25/SD<=50].

Rifeng Enterprise (Foshan) Co., Ltd.
5th/F, Rifeng Building
16 Zumiao Road
Foshan, Guangdong 528000
China
86 757 8230 1768

Facility : Foshan, China

Surface Burning Characteristics of Building Materials

Product Type	Material Type	Trade Name	Product Standard
Tubing# $ [2] [10]*	PEX	Rifeng	ASTM E84
3/8", 1/2" - 2"
# The Flame Spread Index and Smoke Developed Index for 1/2"-2" tubing are based on when tubing is field insulated with 1/2" JM Microlok HP Hi performance fiberglass insulation as per RIFENG installation instructions. The 3/8" tubing is not insulated. $ Certified for blue, natural, red, and white without oxygen barrier. * Flame Spread Index and Smoke Developed Index based on minimum spacing of 18 inches between tubing runs. Tubing shall be marked [NSF®-fs ASTM E84 FS<=25/SD<=50]. [2] Flame Spread Index <= 25 Smoke Developed Index <= 50 [10] ASTM E84, 1/2" - 2" The Flame Spread Index and Smoke Developed Index for 1/2" - 2" tubing are based on when tubing is field insulated with 1/2" JM Microlok HP Hi performance fiberglass insulation as per RIFENG installation instructions. The 3/8" tubing is not insulated.
Tubing$ & [2] [11]	PEX	Rifeng	CAN/ULC S102.2
3/8", 1/2" - 2"
$ Certified for blue, natural, red, and white without oxygen barrier. & 3/8" tubing (without insulation) shall be marked [cNSF®-fs ULc S102.2 FS <=25/SD <=50]. 1/2" - 2" tubing (with insulation), Flame Spread Index and Smoke Developed Index based on when the tubing is field insulated with JM Microlok HP Hi Performance Fiberglass insulation as per the pipe manufacturer's installation instructions. Tubing shall be Marked [cNSF®-fs ULc S102.2 FS<=25/SD<=50]. [2] Flame Spread Index <= 25 Smoke Developed Index <= 50 [11] 3/8" Tubing (without insulation) Tubing shall be marked [cNSF®-fs ULc S102.2 FS<=25/SD<=50]. 1/2" through 2" Tubing (with insulation) Flame Spread Rating and Smoke Developed Classification based on when the tubing is field insulated with JM Microlok HP Hi Performance Fiberglass insulation as per the pipe manufacturer's installation instructions. Tubing shall be marked [cNSF®-fs ULc S102.2 FS<=25/SD<=50].
Tubing[1] [3]	PEX	RIFENG PEX	ASTM E84
3/8" - 2"[2]
[2] Flame Spread Index <= 25 Smoke Developed Index <= 50 [1] Certified for red and white PEX 5106 monowall pipe. [3] The Flame Spread Index and Smoke Developed Index are based on when tubing is field insulated with 1/2" JM Microlok HP Hi performance fiberglass insulation as per RIFENG installation instructions. Flame Spread Index and Smoke Developed Index based on minimum spacing of 18 inches between tubing runs. Tubing shall be marked [NSF®-fs ASTM E84 FS<=25/SD<=50].
Tubing[1] [4]	PEX	RIFENG PEX	CAN/ULC S102.2
3/8" - 2"[2]
[2] Flame Spread Index <= 25 Smoke Developed Index <= 50 [1] Certified for red and white PEX 5106 monowall pipe. [4] The Flame Spread Index and Smoke Developed Index are based on when the tubing is field insulated with 1/2" JM Microlok HP Hi Performance Fiberglass insulation as per the pipe manufacturer's installation instructions. Tubing shall be Marked [cNSF®-fs ULc S102.2 FS<=25/SD<=50].
Tubing[5] [6]	PEX	RIFENG PEX	ASTM E84
3/8" - 1"[2]
[2] Flame Spread Index <= 25 Smoke Developed Index <= 50 [5] Certified for blue, red and white PEX 5106 & 5306 2-layer skinned and 4-layer barrier pipe. [6] The Flame Spread Index and Smoke Developed Index are based on when tubing is field insulated with 1/2" JM Microlok HP Hi performance fiberglass insulation as per RIFENG installation instructions (all listed construction/color/size combinations greater than or equal to 3/8" in diameter). Flame Spread Index and Smoke Developed Index based on minimum spacing of 18 inches between tubing runs. Tubing shall be marked [NSF®-fs ASTM E84 FS<=25/SD<=50].
Tubing[5] [7]	PEX	RIFENG PEX	CAN/ULC S102.2
3/8" - 1"[2]
[2] Flame Spread Index <= 25 Smoke Developed Index <= 50 [5] Certified for blue, red and white PEX 5106 & 5306 2-layer skinned and 4-layer barrier pipe. [7] The Flame Spread Index and Smoke Developed Index are based on when the tubing is field insulated with 1/2" JM Microlok HP Hi Performance Fiberglass insulation as per the pipe manufacturer's installation instructions (all listed construction/color/size combinations greater than or equal to 3/8" in diameter). Tubing shall be Marked [cNSF®-fs ULc S102.2 FS<=25/SD<=50].
Tubing[3] [8]	PEX	RIFENG PEXa	ASTM E84
1/8" - 3"[2]
[2] Flame Spread Index <= 25 Smoke Developed Index <= 50 [3] The Flame Spread Index and Smoke Developed Index are based on when tubing is field insulated with 1/2" JM Microlok HP Hi performance fiberglass insulation as per RIFENG installation instructions. Flame Spread Index and Smoke Developed Index based on minimum spacing of 18 inches between tubing runs. Tubing shall be marked [NSF®-fs ASTM E84 FS<=25/SD<=50]. [8] Certified for Natural non-barrier single layer tubing for 1/8 - 3" sizes. Certified for red, white, blue 2-layer tubing for 1/2", 5/8" 3/4", 1" sizes only.
Tubing[4] [8]	PEX	RIFENG PEXa	CAN/ULC S102.2
1/8" - 3"[2]
[2] Flame Spread Index <= 25 Smoke Developed Index <= 50 [4] The Flame Spread Index and Smoke Developed Index are based on when the tubing is field insulated with 1/2" JM Microlok HP Hi Performance Fiberglass insulation as per the pipe manufacturer's installation instructions. Tubing shall be Marked [cNSF®-fs ULc S102.2 FS<=25/SD<=50]. [8] Certified for Natural non-barrier single layer tubing for 1/8 - 3" sizes. Certified for red, white, blue 2-layer tubing for 1/2", 5/8" 3/4", 1" sizes only.
Tubing[3] [9]	PEX	RIFENG PEXa	ASTM E84
1/8" - 3"[2]
[2] Flame Spread Index <= 25 Smoke Developed Index <= 50 [3] The Flame Spread Index and Smoke Developed Index are based on when tubing is field insulated with 1/2" JM Microlok HP Hi performance fiberglass insulation as per RIFENG installation instructions. Flame Spread Index and Smoke Developed Index based on minimum spacing of 18 inches between tubing runs. Tubing shall be marked [NSF®-fs ASTM E84 FS<=25/SD<=50]. [9] Certified for Natural non-barrier single layer tubing for 1/8 - 3" sizes. Certified for red, white, blue 2-layer tubing for 1/2", 5/8", 3/4", 1" sizes only. Certified for red, white, blue, orange, natural 3-layer tubing for 1/2", 5/8", 3/4", 1" sizes only.
Tubing[4] [9]	PEX	RIFENG PEXa	CAN/ULC S102.2
1/8" - 3"[2]
[2] Flame Spread Index <= 25 Smoke Developed Index <= 50 [4] The Flame Spread Index and Smoke Developed Index are based on when the tubing is field insulated with 1/2" JM Microlok HP Hi Performance Fiberglass insulation as per the pipe manufacturer's installation instructions. Tubing shall be Marked [cNSF®-fs ULc S102.2 FS<=25/SD<=50]. [9] Certified for Natural non-barrier single layer tubing for 1/8 - 3" sizes. Certified for red, white, blue 2-layer tubing for 1/2", 5/8", 3/4", 1" sizes only. Certified for red, white, blue, orange, natural 3-layer tubing for 1/2", 5/8", 3/4", 1" sizes only.

Riifo North America
4737 Smokey Bear Lane
Columbia Falls, MT 59912
United States
406-250-4412

Facility : # 1 China

Surface Burning Characteristics of Building Materials

Product Type	Material Type	Trade Name	Product Standard
Tubing# $ *	PEX	Riifo	ASTM E84
3/8", 1/2" - 2"
Flame Spread Index <= 25	Smoke Developed Index <= 50
# The Flame Spread Index and Smoke Developed Index for 1/2"-2" tubing are based on when tubing is field insulated with 1/2" JM Microlok HP Hi performance fiberglass insulation as per RIFENG installation instructions. The 3/8" tubing is not insulated. $ Certified for blue, natural, red, and white without oxygen barrier. * Flame Spread Index and Smoke Developed Index based on minimum spacing of 18 inches between tubing runs. Tubing shall be marked [NSF®-fs ASTM E84 FS<=25/SD<=50].
Tubing$ &	PEX	Riifo	CAN/ULC S102.2
3/8", 1/2" - 2"
Flame Spread Rating <= 25	Smoke Developed Classification <= 50
$ Certified for blue, natural, red, and white without oxygen barrier. & 3/8" tubing (without insulation) shall be marked [cNSF®-fs ULc S102.2 FS <=25/SD <=50]. 1/2" - 2" tubing (with insulation), Flame Spread Index and Smoke Developed Index based on when the tubing is field insulated with JM Microlok HP Hi Performance Fiberglass insulation as per the pipe manufacturer's installation instructions. Tubing shall be Marked [cNSF®-fs ULc S102.2 FS<=25/SD<=50].

S & B Technical Products, Inc. / Terramix S.A.
1300 East Berry Street
Ft. Worth, TX 76119
United States
800-432-8213
817-923-3344

Facility : Santa Ana, Costa Rica (Hultec)

Fire Main - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Gaskets+ [1]	EPDM	EPDM HT553 Rieberlok Gasket	UL 1285
4" - 24"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.
Gaskets+ [1]	EPDM	EPDM HT553 C900 1 Piece RR	UL 1285
4" - 12"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.
Gaskets+ [1]	EPDM	EPDM HT553 C900 CIOD DD	UL 1285
4" - 18"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.
Gaskets+ [1]	EPDM	EPDM HT553 C900 Platinum Pressure	UL 1285
4" - 12"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.
Gaskets+ [1]	EPDM	EPDM HT553 C900 Rieber	UL 1285
2" - 16"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.
Gaskets+ [1]	EPDM	EPDM HT553 C900 Super Rieber Patented	UL 1285
2" - 12"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.
Gaskets+ [1]	EPDM	EPDM HT553 C905 1 Piece RR	UL 1285
14" - 24"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.
Gaskets+ [1]	EPDM	EPDM HT553 C905 Platinum Pressure	UL 1285
14" - 36"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.
Gaskets+ [1]	EPDM	EPDM HT553 C905 Super Rieber Patented	UL 1285
14" - 48"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.
Gaskets+ [1]	EPDM	EPDM HT553 C909 Biax Mambo	UL 1285
4" - 16"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.
Gaskets+ [1]	EPDM	EPDM HT553 Fast Grip	UL 1285
4" - 24"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.
Gaskets+ [1]	EPDM	EPDM HT553 Fastite Gasket	UL 1285
4" - 36"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.
Gaskets+ [1]	EPDM	EPDM HT553 Field LOK	UL 1285
4" - 36"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.
Gaskets+ [1]	EPDM	EPDM HT553 FIELD LOK 350®	UL 1285
4" - 36"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.
Gaskets+ [1]	EPDM	EPDM HT553 Flange Tyte	UL 1285
4" - 64"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.
Gaskets+ [1]	EPDM	EPDM HT553 Full Face Flange Tyte	UL 1285
4" - 64"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.
Gaskets+ [1]	EPDM	EPDM HT553 IPS 2241 Rieber	UL 1285
1 1/2" - 18"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.
Gaskets+ [1]	EPDM	EPDM HT553 IPS 2241 Super Rieber	UL 1285
14" - 24"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.
Gaskets+ [1]	EPDM	EPDM HT553 IPS Biax Mambo	UL 1285
3" - 12"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.
Gaskets+ [1]	EPDM	EPDM HT553 IPS Hero	UL 1285
1 1/2" - 12"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.
Gaskets+ [1]	EPDM	EPDM HT553 LOKX System DIPS	UL 1285
4"-12"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.
Gaskets+ [1]	EPDM	EPDM HT553 LOKX System IPS	UL 1285
4"-12"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.
Gaskets+ [1]	EPDM	EPDM HT553 Metric Pressure	UL 1285
50 mm - 630 mm
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.
Gaskets+ [1]	EPDM	EPDM HT553 Metric Tyton	UL 1285
80 mm - 1200 mm
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.
Gaskets+ [1]	EPDM	EPDM HT553 MJ Field Lok	UL 1285
4" - 24"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.
Gaskets+ [1]	EPDM	EPDM HT553 One Piece Retainer Ring CIOD	UL 1285
4" - 24"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.
Gaskets+ [1]	EPDM	EPDM HT553 PIP DD	UL 1285
10" - 12"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.
Gaskets+ [1]	EPDM	EPDM HT553 PR IPS	UL 1285
6" - 12"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.
Gaskets+ [1]	EPDM	EPDM HT553 Rest MJ (PVC)	UL 1285
4" - 12"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.
Gaskets+ [1]	EPDM	EPDM HT553 Rieber IPS	UL 1285
1 1/2" - 24"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.
Gaskets+ [1]	EPDM	EPDM HT553 S-Ring	UL 1285
6" - 12"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.
Gaskets+ [1]	EPDM	EPDM HT553 Sure Stop	UL 1285
4" - 36"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.
Gaskets+ [1]	EPDM	EPDM HT553 T Saddle IP	UL 1285
4" - 6"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.
Gaskets+ [1]	EPDM	EPDM HT553 TURNER BIAX C909	UL 1285
4" - 16"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.
Gaskets+ [1]	EPDM	EPDM HT553 TURNER BIAX IPS	UL 1285
4" - 16"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.
Gaskets+ [1]	EPDM	EPDM HT553 TURNER C909	UL 1285
4" - 24"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.
Gaskets+ [1]	EPDM	EPDM HT553 Turner Lock	UL 1285
4" - 12"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.
Gaskets+ [1]	EPDM	EPDM HT553 Tyton CM	UL 1285
3" - 42"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.
Gaskets+ [1]	EPDM	EPDM HT553 TYTON GASKET	UL 1285
3" - 64"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.
Gaskets+ [1]	EPDM	EPDM HT553 USIFLEX	UL 1285
30" - 54"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.
Gaskets+ [1]	EPDM	EPDM HT553 Y Saddle IP	UL 1285
4" - 12"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.
Gaskets+ [1]	NBR	NBR HT4537 C900 1 Piece RR	UL 1285
4" - 12"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.
Gaskets+ [1]	NBR	NBR HT4537 C900 CIOD DD	UL 1285
4" - 18"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.
Gaskets+ [1]	NBR	NBR HT4537 C900 Platinum Pressure	UL 1285
4" - 12"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.
Gaskets+ [1]	NBR	NBR HT4537 C900 Rieber	UL 1285
2" - 16"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.
Gaskets+ [1]	NBR	NBR HT4537 C900 Super Rieber Patented	UL 1285
2" - 12"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.
Gaskets+ [1]	NBR	NBR HT4537 C905 1 Piece RR	UL 1285
14" - 24"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.
Gaskets+ [1]	NBR	NBR HT4537 C905 B/C Ring Certalok	UL 1285
>= 4"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.
Gaskets+ [1]	NBR	NBR HT4537 C905 Platinum Pressure	UL 1285
14" - 36"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.
Gaskets+ [1]	NBR	NBR HT4537 C905 Super Rieber Patented	UL 1285
14" - 48"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.
Gaskets+ [1]	NBR	NBR HT4537 C909 Biax Mambo	UL 1285
4" - 16"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.
Gaskets+ [1]	NBR	NBR HT4537 Fast Grip	UL 1285
4" - 24"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.
Gaskets+ [1]	NBR	NBR HT4537 Fastite Gasket	UL 1285
4" - 36"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.
Gaskets+ [1]	NBR	NBR HT4537 Field LOK	UL 1285
4" - 36"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.
Gaskets+ [1]	NBR	NBR HT4537 FIELD LOK 350®	UL 1285
4" - 36"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.
Gaskets+ [1]	NBR	NBR HT4537 Flange Tyte	UL 1285
4" - 64"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.
Gaskets+ [1]	NBR	NBR HT4537 Fluid Tite	UL 1285
>= 4"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.
Gaskets+ [1]	NBR	NBR HT4537 Full Face Flange Tyte	UL 1285
4" - 64"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.
Gaskets+ [1]	NBR	NBR HT4537 IPS 2241 Rieber	UL 1285
1 1/2" - 18"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.
Gaskets+ [1]	NBR	NBR HT4537 IPS 2241 Super Rieber	UL 1285
14" - 24"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.
Gaskets+ [1]	NBR	NBR HT4537 IPS Biax Mambo	UL 1285
3" - 12"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.
Gaskets+ [1]	NBR	NBR HT4537 IPS Hero	UL 1285
1 1/2" - 12"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.
Gaskets+ [1]	NBR	NBR HT4537 Metric Pressure	UL 1285
50 mm - 630 mm
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.
Gaskets+ [1]	NBR	NBR HT4537 Metric Tyton	UL 1285
80 mm - 1200 mm
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.
Gaskets+ [1]	NBR	NBR HT4537 MJ Field Lok	UL 1285
4" - 24"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.
Gaskets+ [1]	NBR	NBR HT4537 One Piece Retainer Ring CIOD	UL 1285
4" - 24"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.
Gaskets+ [1]	NBR	NBR HT4537 PIP DD	UL 1285
10" - 12"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.
Gaskets+ [1]	NBR	NBR HT4537 PR IPS	UL 1285
6" - 12"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.
Gaskets+ [1]	NBR	NBR HT4537 Rest MJ (PVC)	UL 1285
4" - 12"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.
Gaskets+ [1]	NBR	NBR HT4537 Rieber IPS	UL 1285
1 1/2" - 24"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.
Gaskets+ [1]	NBR	NBR HT4537 S-Ring	UL 1285
6" - 12"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.
Gaskets+ [1]	NBR	NBR HT4537 Sure Stop	UL 1285
4" - 36"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.
Gaskets+ [1]	NBR	NBR HT4537 TURNER BIAX C909	UL 1285
4" - 16"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.
Gaskets+ [1]	NBR	NBR HT4537 TURNER BIAX IPS	UL 1285
4" - 16"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.
Gaskets+ [1]	NBR	NBR HT4537 TURNER C909	UL 1285
4" - 24"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.
Gaskets+ [1]	NBR	NBR HT4537 Tyton	UL 1285
4" - 24"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.
Gaskets+ [1]	NBR	NBR HT4537 Tyton CM	UL 1285
3"- 42"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.
Gaskets+ [1]	NBR	NBR HT4537 Yellowmine	UL 1285
>= 4"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.
Gaskets+ [1]	NBR	NBR HT553 LOKX System DIPS	UL 1285
4" - 12"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.
Gaskets+ [1]	NBR	NBR HT553 LOKX System IPS	UL 1285
4" - 12"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.
Gaskets+ [1]	SBR	SBR HT627 Rieberlok Gasket	UL 1285
4" - 24"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.
Gaskets+ [1]	SBR	SBR HT627 RCT Flex Tite C900	UL 1285
4" - 12"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.
Gaskets+ [1]	SBR	SBR HT627 RCT Flex Tite IPS Transition	UL 1285
4" - 12"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.
Gaskets+ [1]	SBR	SBR HT627 A/T IPS Gasket	UL 1285
1.5" - 4"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.
Gaskets+ [1]	SBR	SBR HT627 C900 CIOD DD SBR Gasket	UL 1285
4" - 18"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.
Gaskets+ [1]	SBR	SBR HT627 C900 Rieber Gasket	UL 1285
2" - 16"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.
Gaskets+ [1]	SBR	SBR HT627 C900 Super Rieber Patented Gasket	UL 1285
2" - 12"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.
Gaskets+ [1]	SBR	SBR HT627 C905 Super Rieber Patented Gasket	UL 1285
14" - 48"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.
Gaskets+ [1]	SBR	SBR HT627 C909 Biax Mambo Gasket	UL 1285
4" - 16"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.
Gaskets+ [1]	SBR	SBR HT627 CIOD Hero	UL 1285
4" - 12"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.
Gaskets+ [1]	SBR	SBR HT627 CIOD RIEBER HR	UL 1285
14"	16"	18"	20"
30"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.
Gaskets+ [1]	SBR	SBR HT627 Fast Grip	UL 1285
4" - 12"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.
Gaskets+ [1]	SBR	SBR HT627 Fastite Gasket	UL 1285
4" - 36"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.
Gaskets+ [1]	SBR	SBR HT627 FIELD LOK 350®	UL 1285
4" - 36"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.
Gaskets+ [1]	SBR	SBR HT627 Field LOK SBR Gasket	UL 1285
4" - 36"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.
Gaskets+ [1]	SBR	SBR HT627 LOKX System DIPS	UL 1285
4" - 12"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.
Gaskets+ [1]	SBR	SBR HT627 LOKX System IPS	UL 1285
4" - 12"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.
Gaskets+ [1]	SBR	SBR HT627 Flange Tyte Gasket	UL 1285
4" - 64"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.
Gaskets+ [1]	SBR	SBR HT627 Flo Control IPS Gasket	UL 1285
2.5" - 8"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.
Gaskets+ [1]	SBR	SBR HT627 Full Face Flange Tyte	UL 1285
4" - 64"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.
Gaskets+ [1]	SBR	SBR HT627 IPS 2241 Rieber Gasket	UL 1285
1.5" - 18"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.
Gaskets+ [1]	SBR	SBR HT627 IPS 2241 Super Rieber Gasket	UL 1285
14" - 24"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.
Gaskets+ [1]	SBR	SBR HT627 IPS Biax Mambo Gasket	UL 1285
3" - 12"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.
Gaskets+ [1]	SBR	SBR HT627 IPS Hero	UL 1285
1.5" - 12"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.
Gaskets+ [1]	SBR	SBR HT627 Lock Push On Gasket	UL 1285
4" - 36"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.
Gaskets+ [1]	SBR	SBR HT627 MJ Field Lok Gasket	UL 1285
4" - 24"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.
Gaskets+ [1]	SBR	SBR HT627 One-Piece Retainer Ring CIOD Gasket	UL 1285
4" - 24"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.
Gaskets+ [1]	SBR	SBR HT627 PIP DD SBR Gasket	UL 1285
10" - 12"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.
Gaskets+ [1]	SBR	SBR HT627 Plastic Retainer Ring IPS Gasket	UL 1285
4" - 12"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.
Gaskets+ [1]	SBR	SBR HT627 Platinum Press SBR Ozone \| Gasket	UL 1285
63mm - 225mm
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.
Gaskets+ [1]	SBR	SBR HT627 Push-On Gasket	UL 1285
3" - 42"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.
Gaskets+ [1]	SBR	SBR HT627 Push-On Metric Gasket	UL 1285
80mm - 1200mm
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.
Gaskets+ [1]	SBR	SBR HT627 RCT	UL 1285
4" - 24"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.
Gaskets+ [1]	SBR	SBR HT627 Rest MJ (PVC)	UL 1285
4" - 12"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.
Gaskets+ [1]	SBR	SBR HT627 Rieber CIOD Gasket	UL 1285
4" - 48"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.
Gaskets+ [1]	SBR	SBR HT627 Rieber IPS Gasket	UL 1285
1.5" - 24"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.
Gaskets+ [1]	SBR	SBR HT627 Rieber Metric Pressure Gasket	UL 1285
50mm - 630mm
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.
Gaskets+ [1]	SBR	SBR HT627 Rieber Metric Pressure Platinum Gkt	UL 1285
50mm - 1200mm
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.
Gaskets+ [1]	SBR	SBR HT627 S-Ring	UL 1285
6" - 12"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.
Gaskets+ [1]	SBR	SBR HT627 Self Lock Push-On Gasket	UL 1285
3" - 24"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.
Gaskets+ [1]	SBR	SBR HT627 Sewer Ret/ Ring	UL 1285
4" - 12"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.
Gaskets+ [1]	SBR	SBR HT627 Super Bell Tite Gasket	UL 1285
4" - 24"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.
Gaskets+ [1]	SBR	SBR HT627 Sure Stop Gasket	UL 1285
4" - 36"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.
Gaskets+ [1]	SBR	SBR HT627 THAI Gasket	UL 1285
100mm - 400mm
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.
Gaskets+ [1]	SBR	SBR HT627 Turner C909	UL 1285
4" - 24"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.
Gaskets+ [1]	SBR	SBR HT627 Turner Lock	UL 1285
4" - 12"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.
Gaskets+ [1]	SBR	SBR HT627 Tyton Gasket	UL 1285
3" - 64"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.
Gaskets+ [1]	SBR	SBR HT627 VF Sewer	UL 1285
4" - 8"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.
Gaskets+ [1]	SBR	SBR HT627 Turner Biax C909	UL 1285
4" - 16"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.
Gaskets+ [1]	SBR	SBR HT627 Turner Biax IPS	UL 1285
4" - 16"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.

Safelink Systems, Inc. DBA MrPEX Systems
14799 Jackal Street NW
Suite 100
Ramsey, MN 55303
United States
800-716-3406
952-652-2472
Visit this company's website

Facility : # 1

Surface Burning Characteristics of Building Materials

Product Type	Material Type	Trade Name	Product Standard
Tubing^ § **	PEX	Mr Pex® Potable	ASTM E84
1/2", 3/4"
^ Flame Spread Index <= 25, Smoke Developed Index <= 50 § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. ** Flame Spread Index and Smoke Developed Index based on minimum spacing of 18 inches between tubing runs. Tubing shall be marked [NSF®-fs ASTM E84 FS<=25/SD<=50].

Sanderson Pipe Corporation
875 International Boulevard
Clarksville, TN 37040
United States
904-275-2833

Facility : # 2 USA

Fire Main - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe	PVC	S.P.C.N.	UL 1285
PC 165: 4", 6", 8", 10", 12", 14", 16", 18", 20", 24" DR 25
PC 200: 14", 16", 18", 20", 24" DR 21
PC 235: 4", 6", 8", 10", 12", 14", 16", 18", 20", 24" DR 18
PC 305: 4", 6", 8", 10", 12", 14", 16", 18", 20", 24" DR 14

Facility : Pittsburg, KS

Fire Main - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe	PVC	S.P.C.K	UL 1285
PC 165: 4", 6", 8", 10", 12" DR 25
PC 235: 4", 6", 8", 10", 12" DR 18
PC 305: 4", 6", 8", 10", 12" DR 14

Silver-Line Plastics LLC
900 Riverside Drive
Asheville, NC 28804
United States
828-252-8755
Visit this company's website

Facility : Ft. Pierce, FL

Surface Burning Characteristics of Building Materials

Product Type	Material Type	Trade Name	Product Standard
Pipe~ [1] [2]	PVC	Silver-Line	CAN/ULC S102.2
1/2" - 12" Sch 40
1/2" - 8" Sch 80
~ Product is authorized to bear the cNSF Mark. [1] Approved for a thickness of 3 mm - 14mm. [2] Flame Spread Value (FSV) =10 Smoke Developed Value (SDV) =195
Pipe~ [1] [2]	PVC	Xirtec PVC	CAN/ULC S102.2
1/2" - 12" Sch 40
1/2" - 8" Sch 80
~ Product is authorized to bear the cNSF Mark. [1] Approved for a thickness of 3 mm - 14mm. [2] Flame Spread Value (FSV) =10 Smoke Developed Value (SDV) =195

Facility : Asheville, NC

Surface Burning Characteristics of Building Materials

Product Type	Material Type	Trade Name	Product Standard
Pipe~ [1] [2]	PVC	Silver-Line	CAN/ULC S102.2
1/2" - 12" Sch 40
1/2" - 8" Sch 80
~ Product is authorized to bear the cNSF Mark. [1] Approved for a thickness of 3 mm - 14mm. [2] Flame Spread Value (FSV) =10 Smoke Developed Value (SDV) =195
Pipe~ [1] [2]	PVC	Xirtec PVC	CAN/ULC S102.2
1/2" - 12" Sch 40
1/2" - 8" Sch 80
~ Product is authorized to bear the cNSF Mark. [1] Approved for a thickness of 3 mm - 14mm. [2] Flame Spread Value (FSV) =10 Smoke Developed Value (SDV) =195
Pipe~ [1] [2]	PVC	RadonX	CAN/ULC S102.2
4" Sch 40
~ Product is authorized to bear the cNSF Mark. [1] Approved for a thickness of 3 mm - 14mm. [2] Flame Spread Value (FSV) =10 Smoke Developed Value (SDV) =195

Facility : Lawton, OK

Surface Burning Characteristics of Building Materials

Product Type	Material Type	Trade Name	Product Standard
Pipe~ [1] [2]	PVC	Silver-Line	CAN/ULC S102.2
1/2" - 12" Sch 40
1/2" - 8" Sch 80
~ Product is authorized to bear the cNSF Mark. [1] Approved for a thickness of 3 mm - 14mm. [2] Flame Spread Value (FSV) =10 Smoke Developed Value (SDV) =195
Pipe~ [1] [2]	PVC	Xirtec PVC	CAN/ULC S102.2
1/2" - 12" Sch 40
1/2" - 8" Sch 80
~ Product is authorized to bear the cNSF Mark. [1] Approved for a thickness of 3 mm - 14mm. [2] Flame Spread Value (FSV) =10 Smoke Developed Value (SDV) =195

The Boys, LLC dba SupplyHouse.com
130 Spagnoli Road
Melville, NY 11747
United States
631-393-2855

Facility : # 1 China

Surface Burning Characteristics of Building Materials

Product Type	Material Type	Trade Name	Product Standard
Tubing# $ *	PEX	Bluefin	ASTM E84
3/8", 1/2" - 2"
Flame Spread Index <= 25	Smoke Developed Index <= 50
# The Flame Spread Index and Smoke Developed Index for 1/2"-2" tubing are based on when tubing is field insulated with 1/2" JM Microlok HP Hi performance fiberglass $ Certified for blue, natural, red, and white without oxygen barrier. * Flame Spread Index and Smoke Developed Index based on minimum spacing of 18 inches between tubing runs. Tubing shall be marked [NSF®-fs ASTM E84 FS<=25/SD<=50].
Tubing$ &	PEX	Bluefin	CAN/ULC S102.2
3/8", 1/2" - 2"
Flame Spread Rating <= 25	Smoke Developed Classification <= 50
$ Certified for blue, natural, red, and white without oxygen barrier. & 3/8" tubing (without insulation) shall be marked [cNSF®-fs ULc S102.2 FS <=25/SD <=50]. 1/2" - 2" tubing (with insulation), Flame Spread Index and Smoke Developed Index based on when the tubing is field insulated with JM Microlok HP Hi Performance Fiberglass insulation as per the pipe manufacturer's installation instructions. Tubing shall be Marked [cNSF®-fs ULc S102.2 FS<=25/SD<=50].

The Mosack Group, Inc.
701 Matthews-Mint Hill Road
Matthews, NC 28105
United States
704-847-9191

Facility : Foshan, China

Surface Burning Characteristics of Building Materials

Product Type	Material Type	Trade Name	Product Standard
Tubing# $ ^ § +++ [G]*	PEX	Apollo/TMG/PurePEX/PureLink	ASTM E84
3/8", 1/2" - 2"[1]
WPPB2012	WPPW2012	WPPW2034	WPPR2034
WPPB2034	WPPR2012	WPPW201
68PXB100012 1/2"
Flame Spread Index <= 25	Flame Spread Index <= 25
68PXB100038 3/8"
Flame Spread Index <= 25	Smoke Developed Index <= 50
68PXB1001 1"
Flame Spread Index <= 25	Smoke Developed Index <= 50
68PXB10012 1/2"
Flame Spread Index <= 25	Smoke Developed Index <= 50
68PXB10034 3/4"
Flame Spread Index <= 25	Smoke Developed Index <= 50
68PXB10038 3/8"
Flame Spread Index <= 25	Smoke Developed Index <= 50
68PXB1012 1/2"
Flame Spread Index <= 25	Smoke Developed Index <= 50
68PXB1034 3/4"
Flame Spread Index <= 25	Smoke Developed Index <= 50
68PXB201 1"
Flame Spread Index <= 25	Smoke Developed Index <= 50
68PXB2012 1/2"
Flame Spread Index <= 25	Smoke Developed Index <= 50
68PXB2034 3/4"
Flame Spread Index <= 25	Smoke Developed Index <= 50
68PXB3001 1"
Flame Spread Index <= 25	Smoke Developed Index <= 50
68PXB30012 1/2"
Flame Spread Index <= 25	Smoke Developed Index <= 50
68PXB30034 3/4"
Flame Spread Index <= 25	Smoke Developed Index <= 50
68PXB5001 1"
Flame Spread Index <= 25	Smoke Developed Index <= 50
68PXB50012 1/2"
Flame Spread Index <= 25	Smoke Developed Index <= 50
68PXB50034 3/4"
Flame Spread Index <= 25	Smoke Developed Index <= 50
68PXB50038 3/8"
Flame Spread Index <= 25	Smoke Developed Index <= 50
68PXR100012 1/2"
Flame Spread Index <= 25	Smoke Developed Index <= 50
68PXR100038 3/8"
Flame Spread Index <= 25	Smoke Developed Index <= 50
68PXR1001 1"
Flame Spread Index <= 25	Smoke Developed Index <= 50
68PXR10012 1/2"
Flame Spread Index <= 25	Smoke Developed Index <= 50
68PXR10034 3/4"
Flame Spread Index <= 25	Smoke Developed Index <= 50
68PXR10038 3/8"
Flame Spread Index <= 25	Smoke Developed Index <= 50
68PXR1012 1/2"
Flame Spread Index <= 25	Smoke Developed Index <= 50
68PXR1034 3/4"
Flame Spread Index <= 25	Smoke Developed Index <= 50
68PXR201 1"
Flame Spread Index <= 25	Smoke Developed Index <= 50
68PXR2012 1/2"
Flame Spread Index <= 25	Smoke Developed Index <= 50
68PXR2034 3/4"
Flame Spread Index <= 25	Smoke Developed Index <= 50
68PXR3001 1"
Flame Spread Index <= 25	Smoke Developed Index <= 50
68PXR30012 1/2"
Flame Spread Index <= 25	Smoke Developed Index <= 50
68PXR30034 3/4"
Flame Spread Index <= 25	Smoke Developed Index <= 50
68PXR5001 1"
Flame Spread Index <= 25	Smoke Developed Index <= 50
68PXR50012 1/2"
Flame Spread Index <= 25	Smoke Developed Index <= 50
68PXR50034 3/4"
Flame Spread Index <= 25	Smoke Developed Index <= 50
68PXR50038 3/8"
Flame Spread Index <= 25	Smoke Developed Index <= 50
68PXW100012 1/2"
Flame Spread Index <= 25	Smoke Developed Index <= 50
68PXW100038 3/8"
Flame Spread Index <= 25	Smoke Developed Index <= 50
68PXW1001 1"
Flame Spread Index <= 25	Smoke Developed Index <= 50
68PXW10012 1/2"
Flame Spread Index <= 25	Smoke Developed Index <= 50
68PXW10034 3/4"
Flame Spread Index <= 25	Smoke Developed Index <= 50
68PXW10038 3/8"
Flame Spread Index <= 25	Smoke Developed Index <= 50
68PXW1012 1/2"
Flame Spread Index <= 25	Smoke Developed Index <= 50
68PXW1034 3/4"
Flame Spread Index <= 25	Smoke Developed Index <= 50
68PXW201 1"
Flame Spread Index <= 25	Smoke Developed Index <= 50
68PXW2012 1/2"
Flame Spread Index <= 25	Smoke Developed Index <= 50
68PXW2034 3/4"
Flame Spread Index <= 25	Smoke Developed Index <= 50
68PXW3001 1"
Flame Spread Index <= 25	Smoke Developed Index <= 50
68PXW30012 1/2"
Flame Spread Index <= 25	Smoke Developed Index <= 50
68PXW30034 3/4"
Flame Spread Index <= 25	Smoke Developed Index <= 50
68PXW5001 1"
Flame Spread Index <= 25	Smoke Developed Index <= 50
68PXW50012 1/2"
Flame Spread Index <= 25	Smoke Developed Index <= 50
68PXW50034 3/4"
Flame Spread Index <= 25	Smoke Developed Index <= 50
68PXW50038 3/8"
Flame Spread Index <= 25	Smoke Developed Index <= 50
APPB1001 1"
Flame Spread Index <= 25	Smoke Developed Index <= 50
APPB10012 1/2"
Flame Spread Index <= 25	Smoke Developed Index <= 50
APPB10034 3/4"
Flame Spread Index <= 25	Smoke Developed Index <= 50
APPB101 1"
Flame Spread Index <= 25	Smoke Developed Index <= 50
APPB1210 1/2"
Flame Spread Index <= 25	Smoke Developed Index <= 50
APPB201 1"
Flame Spread Index <= 25	Smoke Developed Index <= 50
APPB2012 1/2"
Flame Spread Index <= 25	Smoke Developed Index <= 50
APPB2034 3/4"
Flame Spread Index <= 25	Smoke Developed Index <= 50
APPB212 1/2"
Flame Spread Index <= 25	Smoke Developed Index <= 50
APPB234 3/4"
Flame Spread Index <= 25	Smoke Developed Index <= 50
APPB30012 1/2"
Flame Spread Index <= 25	Smoke Developed Index <= 50
APPB30034 3/4"
Flame Spread Index <= 25	Smoke Developed Index <= 50
APPB3410 3/4"
Flame Spread Index <= 25	Smoke Developed Index <= 50
APPB50012 1/2"
Flame Spread Index <= 25	Smoke Developed Index <= 50
APPB50034 3/4"
Flame Spread Index <= 25	Smoke Developed Index <= 50
APPB512 1/2"
Flame Spread Index <= 25	Smoke Developed Index <= 50
APPB534 3/4"
Flame Spread Index <= 25	Smoke Developed Index <= 50
APPR1001 1"
Flame Spread Index <= 25	Smoke Developed Index <= 50
APPR10012 1/2"
Flame Spread Index <= 25	Smoke Developed Index <= 50
APPR10034 3/4"
Flame Spread Index <= 25	Smoke Developed Index <= 50
APPR101 1"
Flame Spread Index <= 25	Smoke Developed Index <= 50
APPR1210 1/2"
Flame Spread Index <= 25	Smoke Developed Index <= 50
APPR201 1"
Flame Spread Index <= 25	Smoke Developed Index <= 50
APPR2012 1/2"
Flame Spread Index <= 25	Smoke Developed Index <= 50
APPR2034 3/4"
Flame Spread Index <= 25	Smoke Developed Index <= 50
APPR212 1/2"
Flame Spread Index <= 25	Smoke Developed Index <= 50
APPR234 3/4"
Flame Spread Index <= 25	Smoke Developed Index <= 50
APPR30012 1/2"
Flame Spread Index <= 25	Smoke Developed Index <= 50
APPR30034 3/4"
Flame Spread Index <= 25	Smoke Developed Index <= 50
APPR3410 3/4"
Flame Spread Index <= 25	Smoke Developed Index <= 50
APPR50012 1/2"
Flame Spread Index <= 25	Smoke Developed Index <= 50
APPR50034 3/4"
Flame Spread Index <= 25	Smoke Developed Index <= 50
APPR512 1/2"
Flame Spread Index <= 25	Smoke Developed Index <= 50
APPR534 3/4"
Flame Spread Index <= 25	Smoke Developed Index <= 50
APPW1001 1"
Flame Spread Index <= 25	Smoke Developed Index <= 50
APPW10012 1/2"
Flame Spread Index <= 25	Smoke Developed Index <= 50
APPW10034 3/4"
Flame Spread Index <= 25	Smoke Developed Index <= 50
APPW101 1"
Flame Spread Index <= 25	Smoke Developed Index <= 50
APPW1012 1/2"
Flame Spread Index <= 25	Smoke Developed Index <= 50
APPW1034 3/4"
Flame Spread Index <= 25	Smoke Developed Index <= 50
APPW1038 3/8"
Flame Spread Index <= 25	Smoke Developed Index <= 50
APPW201 1"
Flame Spread Index <= 25	Smoke Developed Index <= 50
APPW2012 1/2"
Flame Spread Index <= 25	Smoke Developed Index <= 50
APPW2034 3/4"
Flame Spread Index <= 25	Smoke Developed Index <= 50
APPW212 1/2"
Flame Spread Index <= 25	Smoke Developed Index <= 50
APPW234 3/4"
Flame Spread Index <= 25	Smoke Developed Index <= 50
APPW2512 1/2"
Flame Spread Index <= 25	Smoke Developed Index <= 50
APPW2534 3/4"
Flame Spread Index <= 25	Smoke Developed Index <= 50
APPW30012 1/2"
Flame Spread Index <= 25	Smoke Developed Index <= 50
APPW30034 3/4"
Flame Spread Index <= 25	Smoke Developed Index <= 50
APPW50012 1/2"
Flame Spread Index <= 25	Smoke Developed Index <= 50
APPW50034 3/4"
Flame Spread Index <= 25	Smoke Developed Index <= 50
APPW5012 1/2"
Flame Spread Index <= 25	Smoke Developed Index <= 50
APPW5034 3/4"
Flame Spread Index <= 25	Smoke Developed Index <= 50
APPW51 1"
Flame Spread Index <= 25	Smoke Developed Index <= 50
APPW512 1/2"
Flame Spread Index <= 25	Smoke Developed Index <= 50
APPW534 3/4"
Flame Spread Index <= 25	Smoke Developed Index <= 50
APPW538 3/8"
Flame Spread Index <= 25	Smoke Developed Index <= 50
[1] Flame Spread Index <= 25 Smoke Developed Index <= 50 # The Flame Spread Index and Smoke Developed Index for 1/2"-2" tubing are based on when tubing is field insulated with 1/2" JM Microlok HP Hi performance fiberglass insulation as per RIFENG installation instructions. The 3/8" tubing is not insulated. $ Certified for blue, natural, red, and white without oxygen barrier. * Flame Spread Index and Smoke Developed Index based on minimum spacing of 18 inches between tubing runs. Tubing shall be marked [NSF®-fs ASTM E84 FS<=25/SD<=50]. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Tubing$ & § +++ [G]	PEX	Apollo/TMG/PurePEX/PureLink	CAN/ULC S102.2
3/8", 1/2" - 2"[1]
WPPB2012	WPPR2012	WPPR2034	WPPW2034
WPPW201	WPPB2034	WPPW2012
68PXB100012 1/2"
Flame Spread Index <= 25	Smoke Developed Index <= 50
68PXB100038 3/8"
Flame Spread Index <= 25	Smoke Developed Index <= 50
68PXB1001 1"
Flame Spread Index <= 25	Smoke Developed Index <= 50
68PXB10012 1/2"
Flame Spread Index <= 25	Smoke Developed Index <= 50
68PXB10034 3/4"
Flame Spread Index <= 25	Smoke Developed Index <= 50
68PXB10038 3/8"
Flame Spread Index <= 25	Smoke Developed Index <= 50
68PXB1012 1/2"
Flame Spread Index <= 25	Smoke Developed Index <= 50
68PXB1034 3/4"
Flame Spread Index <= 25	Smoke Developed Index <= 50
68PXB201 1"
Flame Spread Index <= 25	Smoke Developed Index <= 50
68PXB2012 1/2"
Flame Spread Index <= 25	Smoke Developed Index <= 50
68PXB2034 3/4"
Flame Spread Index <= 25	Smoke Developed Index <= 50
68PXB3001 1"
Flame Spread Index <= 25	Smoke Developed Index <= 50
68PXB30012 1/2"
Flame Spread Index <= 25	Smoke Developed Index <= 50
68PXB30034 3/4"
Flame Spread Index <= 25	Smoke Developed Index <= 50
68PXB5001 1"
Flame Spread Index <= 25	Smoke Developed Index <= 50
68PXB50012 1/2"
Flame Spread Index <= 25	Smoke Developed Index <= 50
68PXB50034 3/4"
Flame Spread Index <= 25	Smoke Developed Index <= 50
68PXB50038 3/8"
Flame Spread Index <= 25	Smoke Developed Index <= 50
68PXR100012 1/2"
Flame Spread Index <= 25	Smoke Developed Index <= 50
68PXR100038 3/8"
Flame Spread Index <= 25	Smoke Developed Index <= 50
68PXR1001 1"
Flame Spread Index <= 25	Smoke Developed Index <= 50
68PXR10012 1/2"
Flame Spread Index <= 25	Smoke Developed Index <= 50
68PXR10034 3/4"
Flame Spread Index <= 25	Smoke Developed Index <= 50
68PXR10038 3/8"
Flame Spread Index <= 25	Smoke Developed Index <= 50
68PXR1012 1/2"
Flame Spread Index <= 25	Smoke Developed Index <= 50
68PXR1034 3/4"
Flame Spread Index <= 25	Smoke Developed Index <= 50
68PXR201 1"
Flame Spread Index <= 25	Smoke Developed Index <= 50
68PXR2012 1/2"
Flame Spread Index <= 25	Smoke Developed Index <= 50
68PXR2034 3/4"
Flame Spread Index <= 25	Smoke Developed Index <= 50
68PXR3001 1"
Flame Spread Index <= 25	Smoke Developed Index <= 50
68PXR30012 1/2"
Flame Spread Index <= 25	Smoke Developed Index <= 50
68PXR30034 3/4"
Flame Spread Index <= 25	Smoke Developed Index <= 50
68PXR5001 1"
Flame Spread Index <= 25	Smoke Developed Index <= 50
68PXR50012 1/2"
Flame Spread Index <= 25	Smoke Developed Index <= 50
68PXR50034 3/4"
Flame Spread Index <= 25	Smoke Developed Index <= 50
68PXR50038 3/8"
Flame Spread Index <= 25	Smoke Developed Index <= 50
68PXW100012 1/2"
Flame Spread Index <= 25	Smoke Developed Index <= 50
68PXW100038 3/8"
Flame Spread Index <= 25	Smoke Developed Index <= 50
68PXW1001 1"
Flame Spread Index <= 25	Smoke Developed Index <= 50
68PXW10012 1/2"
Flame Spread Index <= 25	Smoke Developed Index <= 50
68PXW10034 3/4"
Flame Spread Index <= 25	Smoke Developed Index <= 50
68PXW10038 3/8"
Flame Spread Index <= 25	Smoke Developed Index <= 50
68PXW1012 1/2"
Flame Spread Index <= 25	Smoke Developed Index <= 50
68PXW1034 3/4"
Flame Spread Index <= 25	Smoke Developed Index <= 50
68PXW201 1"
Flame Spread Index <= 25	Smoke Developed Index <= 50
68PXW2012 1/2"
Flame Spread Index <= 25	Smoke Developed Index <= 50
68PXW2034 3/4"
Flame Spread Index <= 25	Smoke Developed Index <= 50
68PXW3001 1"
Flame Spread Index <= 25	Smoke Developed Index <= 50
68PXW30012 1/2"
Flame Spread Index <= 25	Smoke Developed Index <= 50
68PXW30034 3/4"
Flame Spread Index <= 25	Smoke Developed Index <= 50
68PXW5001 1"
Flame Spread Index <= 25	Smoke Developed Index <= 50
68PXW50012 1/2"
Flame Spread Index <= 25	Smoke Developed Index <= 50
68PXW50034 3/4"
Flame Spread Index <= 25	Smoke Developed Index <= 50
68PXW50038 3/8"
Flame Spread Index <= 25	Smoke Developed Index <= 50
APPB1001 1"
Flame Spread Index <= 25	Smoke Developed Index <= 50
APPB10012 1/2"
Flame Spread Rating <= 25	Smoke Developed Classification <= 50
APPB10034 3/4"
Flame Spread Index <= 25	Smoke Developed Index <= 50
APPB101 1"
Flame Spread Index <= 25	Smoke Developed Index <= 50
APPB1210 1/2"
Flame Spread Index <= 25	Smoke Developed Index <= 50
APPB201 1"
Flame Spread Index <= 25	Smoke Developed Index <= 50
APPB2012 1/2"
Flame Spread Index <= 25	Smoke Developed Index <= 50
APPB2034 3/4"
Flame Spread Index <= 25	Smoke Developed Index <= 50
APPB212 1/2"
Flame Spread Index <= 25	Smoke Developed Index <= 50
APPB234 3/4"
Flame Spread Index <= 25	Smoke Developed Index <= 50
APPB30012 1/2"
Flame Spread Index <= 25	Smoke Developed Index <= 50
APPB30034 3/4"
Flame Spread Index <= 25	Smoke Developed Index <= 50
APPB3410 3/4"
Flame Spread Index <= 25	Smoke Developed Index <= 50
APPB50012 1/2"
Flame Spread Index <= 25	Smoke Developed Index <= 50
APPB50034 3/4"
Flame Spread Index <= 25	Smoke Developed Index <= 50
APPB512 1/2"
Flame Spread Index <= 25	Smoke Developed Index <= 50
APPB534 3/4"
Flame Spread Index <= 25	Smoke Developed Index <= 50
APPR1001 1"
Flame Spread Index <= 25	Smoke Developed Index <= 50
APPR10012 1/2"
Flame Spread Index <= 25	Smoke Developed Index <= 50
APPR10034 3/4"
Flame Spread Index <= 25	Smoke Developed Index <= 50
APPR101 1"
Flame Spread Index <= 25	Smoke Developed Index <= 50
APPR1210 1/2"
Flame Spread Index <= 25	Smoke Developed Index <= 50
APPR201 1"
Flame Spread Index <= 25	Smoke Developed Index <= 50
APPR2012 1/2"
Flame Spread Index <= 25	Smoke Developed Index <= 50
APPR2034 3/4"
Flame Spread Index <= 25	Smoke Developed Index <= 50
APPR212 1/2"
Flame Spread Index <= 25	Smoke Developed Index <= 50
APPR234 3/4"
Flame Spread Index <= 25	Smoke Developed Index <= 50
APPR30012 1/2"
Flame Spread Index <= 25	Smoke Developed Index <= 50
APPR30034 3/4"
Flame Spread Index <= 25	Smoke Developed Index <= 50
APPR3410 3/4"
Flame Spread Index <= 25	Smoke Developed Index <= 50
APPR50012 1/2"
Flame Spread Index <= 25	Smoke Developed Index <= 50
APPR50034 3/4"
Flame Spread Index <= 25	Smoke Developed Index <= 50
APPR512 1/2"
Flame Spread Index <= 25	Smoke Developed Index <= 50
APPR534 3/4"
Flame Spread Index <= 25	Smoke Developed Index <= 50
APPW1001 1"
Flame Spread Index <= 25	Smoke Developed Index <= 50
APPW10012 1/2"
Flame Spread Index <= 25	Smoke Developed Index <= 50
APPW10034 3/4"
Flame Spread Index <= 25	Smoke Developed Index <= 50
APPW101 1"
Flame Spread Index <= 25	Smoke Developed Index <= 50
APPW1012 1/2"
Flame Spread Index <= 25	Smoke Developed Index <= 50
APPW1034 3/4"
Flame Spread Index <= 25	Smoke Developed Index <= 50
APPW1038 3/8"
Flame Spread Index <= 25	Smoke Developed Index <= 50
APPW201 1"
Flame Spread Index <= 25	Smoke Developed Index <= 50
APPW2012 1/2"
Flame Spread Index <= 25	Smoke Developed Index <= 50
APPW2034 3/4"
Flame Spread Index <= 25	Smoke Developed Index <= 50
APPW212 1/2"
Flame Spread Index <= 25	Smoke Developed Index <= 50
APPW234 3/4"
Flame Spread Index <= 25	Smoke Developed Index <= 50
APPW2512 1/2"
Flame Spread Index <= 25	Smoke Developed Index <= 50
APPW2534 3/4"
Flame Spread Index <= 25	Smoke Developed Index <= 50
APPW30012 1/2"
Flame Spread Index <= 25	Smoke Developed Index <= 50
APPW30034 3/4"
Flame Spread Index <= 25	Smoke Developed Index <= 50
APPW50012 1/2"
Flame Spread Index <= 25	Smoke Developed Index <= 50
APPW50034 3/4"
Flame Spread Index <= 25	Smoke Developed Index <= 50
APPW5012 1/2"
Flame Spread Index <= 25	Smoke Developed Index <= 50
APPW5034 3/4"
Flame Spread Index <= 25	Smoke Developed Index <= 50
APPW51 1"
Flame Spread Index <= 25	Smoke Developed Index <= 50
APPW512 1/2"
Flame Spread Index <= 25	Smoke Developed Index <= 50
APPW534 3/4"
Flame Spread Index <= 25	Smoke Developed Index <= 50
APPW538 3/8"
Flame Spread Index <= 25	Smoke Developed Index <= 50
[1] Flame Spread Index <= 25 Smoke Developed Index <= 50 $ Certified for blue, natural, red, and white without oxygen barrier. & 3/8" tubing (without insulation) shall be marked [cNSF®-fs ULc S102.2 FS <=25/SD <=50]. 1/2" - 2" tubing (with insulation), Flame Spread Index and Smoke Developed Index based on when the tubing is field insulated with JM Microlok HP Hi Performance Fiberglass insulation as per the pipe manufacturer's installation instructions. Tubing shall be Marked [cNSF®-fs ULc S102.2 FS<=25/SD<=50]. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.

The Mosack Group, Inc.
11210 Allen Station Drive
Mint Hill, NC 28227
United States
888-229-2874

Facility : Mint Hill, NC

Surface Burning Characteristics of Building Materials

Product Type	Material Type	Trade Name	Product Standard
Tubing^ § **	PEX	Apollo	ASTM E84
1/2", 3/4"
^ Flame Spread Index <= 25, Smoke Developed Index <=50 § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. ** Flame Spread Index and Smoke Developed Index based on minimum spacing of 18 inches between tubing runs. Tubing shall be marked [NSF®-fs ASTM E84 FS<=25/SD<=50].

Facility : Calgary, Alberta, Canada

Surface Burning Characteristics of Building Materials

Product Type	Material Type	Trade Name	Product Standard
Tubing^ § **	PEX	Apollo	ASTM E84
1/2", 3/4"
^ Flame Spread Index <= 25, Smoke Developed Index <=50 § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. ** Flame Spread Index and Smoke Developed Index based on minimum spacing of 18 inches between tubing runs. Tubing shall be marked [NSF®-fs ASTM E84 FS<=25/SD<=50].

Trelleborg Pipe Seals Tijuana S.A de C.V
Colina No. 11850, Parque
Industrial el Florido, Sección Colinas
Tijuana, BC 22237
Mexico
52 664 625 4885

Facility : Tijuana, Baja California, Mexico

Fire Main - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Gasket/Sealing Materials+ ~	SBR	T-565 RIEBER C-900 SBR	FM 1612
4" - 48"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ~ Use of this material in NSF Certified pipe requires NSF's prior authorization.
Gasket/Sealing Materials+ ~	SBR	T-559 RIEBER PRESSURE METRIC SBR	FM 1612
450 mm - 1200 mm
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ~ Use of this material in NSF Certified pipe requires NSF's prior authorization.
Gasket/Sealing Materials+ ~	SBR	T-560 RIEBER IPS SBR	FM 1612
1-1/2" - 24"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ~ Use of this material in NSF Certified pipe requires NSF's prior authorization.
Gasket/Sealing Materials+ ~	SBR	MP 148 T-559 RIEBER PRESSURE METRIC SBR	FM 1612
450" - 1200"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ~ Use of this material in NSF Certified pipe requires NSF's prior authorization.
Gasket/Sealing Materials+ ~	SBR	MP 148 T-560 RIEBER IPS SBR	FM 1612
1-1/2" - 24"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ~ Use of this material in NSF Certified pipe requires NSF's prior authorization.
Gasket/Sealing Materials+ ~	SBR	MP 148 T-565 RIEBER C-900 SBR	FM 1612
4" - 48"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ~ Use of this material in NSF Certified pipe requires NSF's prior authorization.
Gasket/Sealing Materials+ ~	SBR	CERTA-LOK O-RING SBR	FM 1612
5" - 48"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ~ Use of this material in NSF Certified pipe requires NSF's prior authorization.
Gasket/Sealing Materials+ ~	NBR	T-560 RIEBER IPS NITRILE	FM 1612
1 1/2 - 24 in
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ~ Use of this material in NSF Certified pipe requires NSF's prior authorization.
Gasket/Sealing Materials+ ~	NBR	T-565 RIEBER C-900 NITRILE	FM 1612
4" - 48"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ~ Use of this material in NSF Certified pipe requires NSF's prior authorization.
Gasket/Sealing Materials+ ~	NBR	NR 648 T-560 RIEBER IPS NITRILE	FM 1612
1-1/2" - 24"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ~ Use of this material in NSF Certified pipe requires NSF's prior authorization.
Gasket/Sealing Materials+ ~	NBR	NR 648 T-565 RIEBER C-900 NITRILE	FM 1612
4" - 48"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ~ Use of this material in NSF Certified pipe requires NSF's prior authorization.
Gasket/Sealing Materials+ ~	NBR	CERTA-LOK O-RING NITRILE	FM 1612
2" - 10"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ~ Use of this material in NSF Certified pipe requires NSF's prior authorization.
Gasket/Sealing Materials+ ~	NBR	FLUID-TITE NITRILE CIOD	FM 1612
6" - 24"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ~ Use of this material in NSF Certified pipe requires NSF's prior authorization.
Gasket/Sealing Materials+ ~	EPDM	T-560 RIEBER IPS EPDM	FM 1612
1-1/2" - 24"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ~ Use of this material in NSF Certified pipe requires NSF's prior authorization.
Gasket/Sealing Materials+ ~	EPDM	T-565 RIEBER C-900 EPDM	FM 1612
4" - 48"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ~ Use of this material in NSF Certified pipe requires NSF's prior authorization.
Gasket/Sealing Materials+ ~	EPDM	T-584 ANGER LOCK EPDM	FM 1612
4" - 48"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ~ Use of this material in NSF Certified pipe requires NSF's prior authorization.
Gasket/Sealing Materials+ ~	EPDM	T-552 ANGER LOCK IPS EPDM	FM 1612
2"-14"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ~ Use of this material in NSF Certified pipe requires NSF's prior authorization.
Gasket/Sealing Materials+ ~	EPDM	T-603 POWER LOCK IPS EPDM	FM 1612
1-1/2" - 12"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ~ Use of this material in NSF Certified pipe requires NSF's prior authorization.
Gasket/Sealing Materials+ ~	EPDM	E 148 T-560 RIEBER IPS EPDM	FM 1612
1-1/2" - 24"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ~ Use of this material in NSF Certified pipe requires NSF's prior authorization.
Gasket/Sealing Materials+ ~	EPDM	E 148 T-565 RIEBER C-900 EPDM	FM 1612
4" - 48"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ~ Use of this material in NSF Certified pipe requires NSF's prior authorization.
Gasket/Sealing Materials+ ~	EPDM	E 148 T-552 ANGER LOCK IPS EPDM	FM 1612
2"-14"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ~ Use of this material in NSF Certified pipe requires NSF's prior authorization.
Gasket/Sealing Materials+ ~	EPDM	E 148 T-584 ANGER LOCK EPDM	FM 1612
4" - 48"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ~ Use of this material in NSF Certified pipe requires NSF's prior authorization.
Gasket/Sealing Materials+ ~	EPDM	E 148 T-603 POWER LOCK IPS EPDM	FM 1612
1-1/2" - 12"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ~ Use of this material in NSF Certified pipe requires NSF's prior authorization.
Gasket/Sealing Materials+ ~	EPDM	CERTA-LOK O-RING EPDM	FM 1612
2"-10"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ~ Use of this material in NSF Certified pipe requires NSF's prior authorization.
Gasket/Sealing Materials+ ~	EPDM	FLUID-TITE EPDM CIOD	FM 1612
6"-24"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ~ Use of this material in NSF Certified pipe requires NSF's prior authorization.

Uponor
5925 148th Street West
Apple Valley, MN 55124
United States
800-321-4739
952-891-2000
Visit this company's website

Facility : Apple Valley, MN

Fire Sprinkler Pipe and Fitting Systems

Product Type	Material Type	Trade Name	Product Standard
Pipe and Fitting System% ¢ **	MLTPL	AQUASAFE®*	ANSI/CAN/UL 1821
Coupling
LF4545075 - ProPEX LF Brass Coupling, 1/2" PEX x 3/4" PEX	LF4547510 - ProPEX LF Brass Coupling, 3/4" PEX x 1" PEX	LF4547575 - ProPEX LF Brass Coupling, 3/4" PEX x 3/4" PEX	LF4541010 - ProPEX LF Brass Coupling, 1" PEX x 1" PEX
Q4777510/Q4777510R5 - ProPEX EP Coupling, 3/4" PEX x 1" PEX	Q4777575/Q47775R5/Q47775R20 - ProPEX EP Coupling, 3/4" PEX x 3/4" PEX	Q4771010/Q47710R5 - ProPEX EP Coupling, 1" PEX x 1" PEX	Q4771307 - ProPEX EP Coupling, 1 1/4" PEX x 3/4" PEX
Q4771310 - ProPEX EP Coupling, 1 1/4" PEX x 1" PEX	Q4771313 - ProPEX EP Coupling, 1 1/4" PEX x 1 1/4" PEX
Elbow
LF4710500 - ProPEX LF Brass Elbow, 1/2" PEX x 1/2" PEX	LF4710750 - ProPEX LF Brass Elbow, 3/4" PEX x 3/4" PEX	LF4711000 - ProPEX LF Brass Elbow, 1" PEX x 1" PEX	Q4760500/Q4760500R5/Q4760500R25 - ProPEX EP Elbow, 1/2" PEX x 1/2" PEX
Q4760750/Q4760750R5/Q4760750R10 - ProPEX EP Elbow, 3/4" PEX x 3/4" PEX	Q4761000/Q4761000R5 - ProPEX EP Elbow, 1" PEX x 1" PEX	Q4761250 - ProPEX EP Elbow, 1 1/4" PEX x 1 1/4" PEX	Q4761515 - ProPEX 45 degree EP Elbow, 1-1/2" x 1-1/2"
Q4762020 - ProPEX 45 degree EP Elbow, 2" x 2"
Female Adapter
LF4577575 - ProPEX LF Brass Female Threaded Adapter, 3/4" PEX x 3/4" NPT	LF4571010/LF45710R - ProPEX LF Brass Female Threaded Adapter, 1" PEX x 1" NPT	LF4571313 - ProPEX LF Brass Female Threaded Adapter, 1 1/4" PEX x 1 1/4" NPT	LF4571515 - ProPEX LF Brass Female Threaded Adapter, 1 1/2" PEX x 1 1/2" NPT
LF4572020 - ProPEX LF Brass Female Threaded Adapter, 2" PEX x 2" NPT
Fire Sprinkler Head Adapter
LF7707575 - ProPEX LF Brass Fire Sprinkler Adapter Tee,¾" PEX x ¾" PEX x ½" FNPT	LF7701010 - ProPEX LF Brass Fire Sprinkler Adapter Tee,1" PEX x 1" PEX x ½: FNPT	LF7717550 - ProPEX LF Brass Fire Sprinkler Adapter Elbow, 3/4" PEX x 1/2" FNPT	LF7711050 - ProPEX LF Brass Fire Sprinkler Adapter Elbow, 1" PEX x 1/2" FNPT
Male Adapter
LF4527575/LF45275R - ProPEX LF Brass Male Threaded Adapter, 3/4" PEX x 3/4" NPT	LF4521010/LF45210R - ProPEX LF Brass Male Threaded Adapter, 1" PEX x 1" NPT	LF4521313 - ProPEX LF Brass Male Threaded Adapter, 1 1/4" PEX x 1 1/4" NPT
Opposing Port Tees
Q4801075 - ProPEX EP Opposing Port Tee, 1" PEXx1" PEXx3/4"PEXx3/4" PEX	Q4801375 - ProPEX EP Opposing Port Tee, 1 1/4" PEXx1 1/4" PEXx3/4" PEXx3/4" PEX	Q4801575 - ProPEX EP Opposing Port Tee-1 1/2" PEXx1 1/2" PEXx3/4" PEXx3/4" PEX	Q4802075 - ProPEX EP Opposing Port Tee-2" PEXx2" PEXx3/4"PEXx3/4" PEX
Plug
Q4350750/Q4350750R5 - ProPEX EP Plug, 3/4" PEX	Q4351000/Q4351000R5 - ProPEX EP Plug , 1" PEX	Q4351250 - ProPEX EP Plug, 1 1/4"
ProPEX Rings
Q4690756/Q4690756R10/Q4690756R30 - 3/4" ProPEX Ring with Stop	Q4691000/Q4691000R10 - 1" ProPEX Ring with Stop	Q4691250 - 1 1/4" ProPEX Ring with Stop
Reducing Tee
LF4707550 - ProPEX LF Brass Tee, 3/4" PEX x 3/4" PEX x 1/2" PEX	LF4707710 - ProPEX LF Brass Tee, 3/4" PEX x 3/4" PEX x 1" PEX	LF4701150 - ProPEX LF Brass Tee, 1" PEX x 1" PEX x 1/2" PEX	LF4701175 - ProPEX LF Brass Tee, 1" PEX x 1" PEX x 3/4" PEX
LF4701751 - ProPEX LF Brass Tee, 1" PEX x 3/4" PEX x 1" PEX	LF4701775 - ProPEX LF Brass Tee, 1" PEX x 3/4" PEX x 3/4" PEX	Q4757550/Q4757550R5 - ProPEX EP Reducing Tee, 3/4" PEX x 3/4" PEX x 1/2" PEX	Q4757557 - ProPEX EP Reducing Tee, 3/4" PEX x 1/2" PEX x 3/4" PEX
Q4757557R8 - ProPEX EP Reducing Tee, 3/4" PEX x 1/2" PEX x 3/4" PEX - copy	Q4757557 - ProPEX EP Reducing Tee, 3/4" PEX x 1/2" PEX x 3/4" PEX - copy	Q4757710 - ProPEX EP Reducing Tee, 3/4" PEX x 3/4" PEX x 1" PEX	Q4751113 - ProPEX EP Reducing Tee, 1" PEX x 1" PEX x 1 1/4"
Q4751150 - ProPEX EP Reducing Tee, 1" PEX x 1" PEX x 1/2" PEX	Q4751175/Q4751175R5 - ProPEX EP Reducing Tee, 1" PEX x 1" PEX x 3/4" PEX	Q4751311 - ProPEX EP Reducing Tee, 1 1/4" PEX x 1" PEX x 3/4" PEX	Q4751317 - ProPEX EP Reducing Tee, 1 1/4" PEX x 1" PEX x 1" PEX
Q4751331 - ProPEX EP Reducing Tee, 1 1/4" PEX x 1 1/4" PEX x 1" PEX	Q4751337 - ProPEX EP Reducing Tee, 1 1/4" PEX x 1 1/4" PEX x 3/4" PEX	Q4751371 - ProPEX EP Reducing Tee, 1 1/4" PEX x 3/4" PEX x 1" PEX	Q4751373 - ProPEX EP Reducing Tee, 1 1/4" PEX x 3/4" PEX x 1 1/4" PEX
Q4751377 - ProPEX EP Reducing Tee, 1 1/4" PEX x 3/4" PEX x 3/4" PEX	Q4751511 - ProPEX EP Reducing Tee, 1 1/2" PEX x 1" PEX x 1" PEX	Q4751517 - ProPEX EP Reducing Tee, 1 1/2" PEX x 1" PEX x 3/4" PEX	Q4751551 - ProPEX EP Reducing Tee, 1 1/2" PEX x 1 1/2" PEX x 3/4" PEX
Q4751553 - ProPEX EP Reducing Tee, 1 1/2" PEX x 1 1/2" PEX x 1 1/4" PEX	Q4751557 - ProPEX EP Reducing Tee, 1 1/2" PEX x 1 1/2" PEX x 1" PEX	Q4751751/Q4751751R5 - ProPEX EP Reducing Tee, 1" PEX x 3/4" PEX x 1" PEX	Q4751775 - ProPEX EP Reducing Tee, 1" PEX x 3/4" PEX x 3/4" PEX
Q47515501 - ProPEX EP Reducing Tee, 1/2" x 1-1/2" x 1/2"	Q4751350 - ProPEX EP Reducing Tee, 1-1/4" x 1-1/4" x 1/2"	Q4751505 - ProPEX EP Reducing Tee, 1-1/2" x 1" x 1-1/2"	Q4752152 - ProPEX EP Reducing Tee, 2" x 1-1/2" x 2"
Q4752250 - ProPEX EP Reducing Tee, 2" x 2" x 1/2"
Sweat Adapter
LF4517575/LF45175R - ProPEX LF Brass Sweat Adapter, 3/4" PEX x 3/4" Copper	LF4511010/LF45110R - ProPEX LF Brass Sweat Adapter 1" PEX x 1" Copper	LF4511313 - ProPEX LF Brass Sweat Adapter, 1 1/4" PEX x 1 1/4" Copper	LF4511515 - ProPEX LF Brass Sweat Adapter, 1 1/2" PEX x 1 1/2" Copper
LF4512020 - ProPEX LF Brass Sweat Adapter, 2" PEX x 2" Copper
Tee
LF4707575 - ProPEX LF Brass Tee, 3/4" PEX x 3/4" PEX x 3/4" PEX	LF4701010 - ProPEX LF Brass Tee, 1" PEX x 1" PEX x 1" PEX	Q4757575/Q4757575R5 - ProPEX EP Tee, 3/4" PEX x 3/4" PEX x 3/4" PEX	Q4751010 - ProPEX EP Tee, 1" PEX x 1" PEX x 1" PEX
Q4751313 - ProPEX EP Tee, 1 1/4" PEX x 1 1/4" PEX x 1 1/4" PEX	WS4360751/SWP4360751 - ProPEX EP Elbow Water Meter Connector, 3/4" PEX x 1" NPSM	WS4361001 - ProPEX EP Elbow Water Meter Connector, 1" PEX x 1 1/4" NPSM	WS4360750/SWP4360750- ProPEX EP Straight Water Meter Connector, 3/4" PEXx1" NPSM
WS4360750R - ProPEX EP Straight Water Meter Connector, 3/4" PEXx1" NPSM	WS4361000 - ProPEX EP Straight Water Meter Connector, 1" PEX x 1 1/4" NPSM
Tubing
3/4" Uponor AquaPEX White	1" Uponor AquaPEX White	1 1/4" Uponor AquaPEX White
% PEX pipe and fittings are intended for use in multi-purpose piping systems of residential occupancies as defined in ANSI/NFPA 13D, "Installation of Sprinkler Systems in One- and Two- Family Dwellings and Manufactured Homes", the National Building Code of Canada, and the International Residential Code, Section 2904, and are designed to withstand a working pressure of not less than 130 psi at 120° F. PEX pipe and fittings are intended to be installed in accordance with the requirements specified in the manufacturer’s installation instructions and ANSI/NFPA 13D. Protection is intended to be provided for PEX pipe and fittings in multi-purpose piping systems. The minimum protection should consist of either (1) one layer of 3/8-in. gypsum wallboard, (2) a suspended membrane ceiling with lay-in panels or tiles having a weight of not less than 0.35 lbs per sq ft when installed with metallic support grids, (3) 1/2 in plywood or (4) other material with a 15 minute fire rating. PEX pipe and fittings are intended for use in areas where the maximum ambient temperature does not exceed 120° F. These pipe and fittings are not intended to be installed in outdoor applications. The PEX pipe and fittings are intendedfor use in wet-pipe systems only and have not been evaluated for use in dry-pipe systems. * These products may also be represented by the trade name AquaPEX. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. ** Pipe and fittings Certified as a system using installation and design manual titled "Uponor Residential Fire Sprinkler Systems, AquaSAFE™ System Installation Guide".

Facility : Hutchinson, MN

Fire Sprinkler Pipe and Fitting Systems

Product Type	Material Type	Trade Name	Product Standard
Pipe and Fitting System% ¢ **	PEX	AQUASAFE®*	ANSI/CAN/UL 1821
Tubing
3/4" Uponor AquaPEX White	1" Uponor AquaPEX White
% PEX pipe and fittings are intended for use in multi-purpose piping systems of residential occupancies as defined in ANSI/NFPA 13D, "Installation of Sprinkler Systems in One- and Two- Family Dwellings and Manufactured Homes", the National Building Code of Canada, and the International Residential Code, Section 2904, and are designed to withstand a working pressure of not less than 130 psi at 120° F. PEX pipe and fittings are intended to be installed in accordance with the requirements specified in the manufacturer’s installation instructions and ANSI/NFPA 13D. Protection is intended to be provided for PEX pipe and fittings in multi-purpose piping systems. The minimum protection should consist of either (1) one layer of 3/8-in. gypsum wallboard, (2) a suspended membrane ceiling with lay-in panels or tiles having a weight of not less than 0.35 lbs per sq ft when installed with metallic support grids, (3) 1/2 in plywood or (4) other material with a 15 minute fire rating. PEX pipe and fittings are intended for use in areas where the maximum ambient temperature does not exceed 120° F. These pipe and fittings are not intended to be installed in outdoor applications. The PEX pipe and fittings are intended for use in wet-pipe systems only and have not been evaluated for use in drypipe systems. * These products may also be represented by the trade name AquaPEX. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. ** Pipe and fittings Certified as a system using installation and design manual titled "Uponor Residential Fire Sprinkler Systems, AquaSAFE™ System Installation Guide".

Waterline Products Co. Limited
100 Westcreek Blvd, Unit 2
Brampton, ON L6T 5V7
Canada
+1 905 453 2400

Facility : # 1 China

Surface Burning Characteristics of Building Materials

Product Type	Material Type	Trade Name	Product Standard
Tubing$ &	PEX	Waterline PEX	CAN/ULC S102.2
3/8", 1/2" - 2"
Flame Spread Rating <= 25	Smoke Developed Classification <= 50
$ Certified for blue, natural, red, and white without oxygen barrier. & 3/8" tubing (without insulation) shall be marked [cNSF®-fs ULc S102.2 FS <=25/SD <=50]. 1/2" - 2" tubing (with insulation), Flame Spread Index and Smoke Developed Index based on when the tubing is field insulated with JM Microlok HP Hi Performance Fiberglass insulation as per the pipe manufacturer's installation instructions. Tubing shall be Marked [cNSF®-fs ULc S102.2 FS<=25/SD<=50].
Tubing# $ *	PEX	Waterline PEX	ASTM E84
3/8", 1/2" - 2"
Flame Spread Index <= 25	Smoke Developed Index <= 50
# The Flame Spread Index and Smoke Developed Index for 1/2"-2" tubing are based on when tubing is field insulated with 1/2" JM Microlok HP Hi performance fiberglass insulation as per RIFENG installation instructions. The 3/8" tubing is not insulated. $ Certified for blue, natural, red, and white without oxygen barrier. * Flame Spread Index and Smoke Developed Index based on minimum spacing of 18 inches between tubing runs. Tubing shall be marked [NSF®-fs ASTM E84 FS<=25/SD<=50].

Zurn PEX, Inc.
116 Maple Street
Commerce, TX 75428
United States
903-886-2580
Visit this company's website

Facility : Harborcreek, PA

Fire Sprinkler Pipe and Fitting Systems

Product Type	Material Type	Trade Name	Product Standard
Pipe and Fitting System% * [G]*	MLTPL	Zurn PEX Fire Protection System	ANSI/CAN/UL 1821
Coupling (BARB x BARB)
1" barb x 1" barb (QQC55GFX)	1" barb x 1" barb (QQPC55FX)	1 1/4" barb x 1 1/4" barb (QQC66GFX)	1 1/2" barb x 1 1/2" barb (QQC77GFX)
2" barb x 2" barb (QQC88GFX)
Crimp Coupling
1" Crimp PEX X 1/2" FPT (QQFSC53GFX)
Crimp Tee
1" Crimp PEX x 1" Crimp PEX x 1/2" FPT (QQFST553GFX)
Elbow (BARB X BARB)
1" barb x 1" barb (QQPE55FX)	1" barb x 1" barb (QQE55GFX)	1 1/4" barb x 1 1/4" barb (QQE66GFX)	1 1/2" barb x 1 1/2" barb (QQE77GFX)
2" barb x 2" barb (QQE88GFX)
Expansion Coupling
1" EXP PEX x 1/2" FPT (QEFSC53GFX)
Expansion Tee
1" EXP PEX x 1" EXP PEX x 1/2" FPT (QEFST553FGX)
Female Adapter (BARB x FPT)
1" barb x 1" FPT (QQUFC55GFX)	1 1/4" barb x 1 1/4" FPT (QQUFC66GFX)	1 1/2" barb x 1 1/2" FPT (QQUFC77GFX)
Female Sweat Adapter (BARB x SWEAT)
1" barb x 1" sweat (QQ800CFX)	1 1/4" barb x 1 1/4" sweat (QQ812GFX)	1 1/2" barb x 1 1/2" sweat (QQ950GFX)	2" barb x 2" sweat (QQ1050GFX)
Fire Sprinkler Coupling
1" barb x 1/2" FPT (QQFSC53GFX)
Fire Sprinkler Tee (BARB X BARB X FPT)
1" barb x 1" barb x 1/2" FPT (QQFST553GFX)
Male Adapter (BARB X MPT)
1" barb x 1" MPT (QQMC55GFX)	1" barb x 1" barb MPT (QQPMC55FX)	1 1/4" barb x 1 1/4" MPT (QQMC66GFX)	1 1/2" barb x 1 1/2" MPT (QQMC77GFX)
2" barb x 2" MPT (QQMC88GFX)
Male Sweat Adapter (BARB X SWEAT)
1" barb x 1" sweat (QQ700CFX)
Plug (Barb)
1" (QQP5GFX)	1 1/4" (QQP6GFX)	1 1/2" (QQP7GFX)	2" (QQP8GFX)
Reducer Tee (BARB X BARB X BARB)
1" barb x 1" barb x 1/2" barb (QQT553GFX)	1" barb x 1" barb x 3/4" barb (QQT554GFX)	1" barb x 1" barb x 1/2" barb (QQPT553FX)	1" barb x 1" barb x 3/4" barb (QQPT554FX)
1 1/4" barb x 1 1/4" barb x 1/2" barb (QQT663GFX)	1 1/4" barb x 1 1/4" barb x 3/4" barb (QQT664GFX)	1 1/2" barb x 1 1/2" barb x 3/4" barb (QQT774GFX)	1 1/2" barb x 1 1/2" barb x 1" barb (QQT775GFX)
2" barb x 2" barb x 1" barb (QQT885GFX)
Reducing Coupling (BARB x BARB)
1" barb x 3/4" barb (QQPC54FX)	1 1/4" barb x 1" barb (QQC65GFX)	1 1/2" barb x 1 1/4" barb (QQC76GFX)	2" barb x 1 1/2" barb (QQC87GFX)
Tee (BARB X BARB X BARB)
1" barb x 1" barb x 1" barb (QQT555GFX)	1" barb x 1" barb x 1" barb (QQPT555GFX)	1 1/4" barb x 1 1/4" barb x 1 1/4" barb (QQT666GFX)	1 1/2" barb x 1 1/2" barb x 1 1/2" barb (QQT777GFX)
2" barb x 2" barb x 2" barb (QQT888GFX)
Tubing
1" – 2" White ZurnPEX
% PEX pipe and fittings are intended for use in multi-purpose piping systems of residential occupancies as defined in ANSI/NFPA 13D, "Installation of Sprinkler Systems in One- and Two- Family Dwellings and Manufactured Homes" and the International Residential Code, Section 2904, and are designed to withstand a working pressure of not less than 130 psi at 120° F. PEX pipe and fittings are intended to be installed in accordance with the requirements specified in the manufacturer’s installation instructions and ANSI/NFPA 13D. Protection is intended to be provided for PEX pipe and fittings in multi-purpose piping systems. The minimum protection should consist of either (1) one layer of 3/8-in. gypsum wallboard, (2) a suspended membrane ceiling with lay-in panels or tiles having a weight of not less than 0.35 lbs per sq ft when installed with metallic support grids, (3) 1/2 in plywood or (4) other material with a 15 minute fire rating. PEX pipe and fittings are intended for use in areas where the maximum ambient temperature does not exceed 120° F. These pipe and fittings are not intended to be installed in outdoor applications. The PEX pipe and fittings are intended for use in wet-pipe systems only and have not been evaluated for use in dry-pipe systems. ** Pipe and fittings Certified as a system using Installation/assembly instructions titled "Zurn PEX Residential Fire Protection Addendum to Plumbing Installation Guide". [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.

Facility : Commerce, TX

Fire Sprinkler Pipe and Fitting Systems

Product Type	Material Type	Trade Name	Product Standard
Pipe and Fitting System% * [G]*	PEX	Zurn PEX Fire Protection System	ANSI/CAN/UL 1821
Tubing
1" White ZurnPEX
% PEX pipe and fittings are intended for use in multi-purpose piping systems of residential occupancies as defined in ANSI/NFPA 13D, "Installation of Sprinkler Systems in One- and Two- Family Dwellings and Manufactured Homes" and the International Residential Code, Section 2904, and are designed to withstand a working pressure of not less than 130 psi at 120° F. PEX pipe and fittings are intended to be installed in accordance with the requirements specified in the manufacturer’s installation instructions and ANSI/NFPA 13D. Protection is intended to be provided for PEX pipe and fittings in multi-purpose piping systems. The minimum protection should consist of either (1) one layer of 3/8-in. gypsum wallboard, (2) a suspended membrane ceiling with lay-in panels or tiles having a weight of not less than 0.35 lbs per sq ft when installed with metallic support grids, (3) 1/2 in plywood or (4) other material with a 15 minute fire rating. PEX pipe and fittings are intended for use in areas where the maximum ambient temperature does not exceed 120° F. These pipe and fittings are not intended to be installed in outdoor applications. The PEX pipe and fittings are intended for use in wet-pipe systems only and have not been evaluated for use in dry-pipe systems. ** Pipe and fittings Certified as a system using Installation/assembly instructions titled "Zurn PEX Residential Fire Protection Addendum to Plumbing Installation Guide", dated October 2010. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.

Number of matching Manufacturers is 30
Number of matching Products is 2163
Processing time was 2 seconds

NSF Product and Service Listings

Did you know?

Connect with NSF