NSF Product and Service Listings
These NSF Official Listings are current as of Tuesday, September 24, 2024 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.
Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/food/Listings.asp?Standard=003&
NSF/ANSI 3
Commercial Warewashing Equipment
Commercial Warewashing Equipment
For informational purposes, the estimated racks per hour or dishes per hour for NSF/ANSI 3 Certified dishwashers can be calculated as follows:
Racks per Hour for Stationary Rack Dishwashers = 3600(NR) / TC
Racks per Hour for Rack Conveyor Dishwashers = (CS)(60) / RL
Dishes per Hour for Rackless Conveyor Dishwashers = (120)(CS)(CW) / PD
Water Consumption (gallons per hour) for Stationary Rack Dishwashers = (GPC)(RPH)
Water Consumption (gallons per hour) for Conveyor Dishwashers = (GPM)(60)
Where: CS = Conveyor speed measured in feet per minute
CW = Conveyor width measured in inches
GPC = Gallons per cycle
GPM = Gallons per minute
NR = Number of racks the dishwasher is designed to hold per cycle
PD = Distance between pegs measured in inches, center to center of the peg, in the direction of conveyor travel
RL = Length of the rack measured in feet
RPH = Racks per hour
TC = Total cycle time measured in seconds
The total cycle time includes wash, rinse, dwell, and load times. Load times will vary depending on the type of dishwasher. Estimated load times commonly used for specific types of dishwashers are as follows:
door type (straight thru) - 5 seconds
door type (corner) - 7 seconds
hood type - 8 seconds
front opening type - 30 seconds
Alvey Washing Equipment Company | |
4600 North Mason-Montgomery Road | |
Mason, OH 45040 | |
United States | |
513-923-5658 |
Facility : Mason, OH
CONVEYOR POT, PAN, AND UTENSIL WASHING MACHINES
Final Rinse | ||||||||
(20 psi) | Conveyor Speed | |||||||
Model | Conveyor | Flow | Usage | (Max.) | Footnotes | |||
Number | Width | gpm | gph | (ft/min.) | ||||
Hot Water Sanitizing Turntable Pot, Pan & Utensil Washing Machine |
||||||||
TT-84 | 20" | 5.1 | 308 | 2.9 |
STATIONARY RACK POT, PAN, AND UTENSIL WASHING MACHINES
Final Rinse | ||||||||
(20 psi) | Operating Time | |||||||
Model | Rack Size | Flow | Usage | (seconds) | Footnotes | |||
Number | Width | gpm | gph | Wash | Rinse | Dwell | ||
Single Tank Stationary Rack - Hot Water Sanitizing |
||||||||
FL-2S | 36x30 | 9.5 | 81 | 142 | 30 | 0 | ||
FLC-10 | 27x26 | 6.6 | 66 | 120 | 30 | 0 | ||
FLC-36 | 34x72 | 10.2 | 122.4 | 180 | 60 | 30 | [1] | |
KS-48 | 61x36 | 9.4 | 109 | 180 | 60 | 30 | ||
KS-70-N | 69x49 | 23.5 | 446 | 120 | 60 | 0 | ||
KS-88-N | 69x65 | 23.5 | 446 | 120 | 60 | 0 | ||
SA-5A | 35x25 | 8.3 | 95.7 | 120 | 30 | 0 | ||
SL-2D | 27x26 | 13.2 | 145 | 120 | 30 | 0 | [2] | |
SL-2S | 27x26 | 6.6 | 76 | 120 | 30 | 0 | [3] | |
SMT-88 | 69x65 | 23.5 | 446 | 120 | 60 | 0 | ||
[1] Model FLC-36 may be offered in a higher than standard size that is 9 inches taller and different nozzle set up on spray arms. Unit tested to have 8 gpm and 53.3 ghp final rinse. Wash time increased to 420 seconds (rinse and dwell remain the same). [2] Requires 2 27" x 26" racks. [3] Also available as corner unit installation with one door on a side. |
American Dish Service Corporation | |
900 Blake Street | |
Edwardsville, KS 66111 | |
United States | |
913-422-3700 |
Facility : Edwardsville, KS
CONVEYOR DISHWASHING MACHINES
Final Rinse | ||||||||
(20 psi) | Conveyor Speed | |||||||
Model | Conveyor | Flow | Usage | (Max.) | Footnotes | |||
Number | Width | gpm | gph | (ft/min.) | ||||
Multiple Tank Rack Conveyor Dishwasher - (Dual Sanitizing Mode Machine)[1] [2] [3] [4] |
||||||||
ADC-44 | 20" | 1.67 | 100.2 | 6.7 | ||||
ADC-44-T | 20" | 1.67 | 100.2 | 6.7 | ||||
ADC-66 | 20" | 1.67 | 100.2 | 6.7 | ||||
ADC-66-T | 20" | 1.67 | 100.2 | 6.7 | ||||
[1] Unit accepted when operated as a chemical sanitizing dishwasher provided it is installed with a Beta Technology Model H9200SR or H9300S chemical sanitizer feeder. [2] Unit accepted when operated as a chemical sanitizing dishwasher/glasswasher provided it is installed with an American Dish Service model 64-0001 or 64-0010 chemical sanitizer feeder. [3] Available with moisture vapor removal system. [4] Unit Certified to ASSE 1004. |
GLASSWASHING MACHINES
"Super Q" Glasswasher[1] |
|
ASQ | |
ASQII | |
[1] Tested at the following temperature: Wash 120°F. Rinse 120°F. |
STATIONARY RACK DISHWASHING MACHINES
Final Rinse | ||||||||
(20 psi) | Operating Time | |||||||
Model | Rack Size | Flow | Usage | (seconds) | Footnotes | |||
Number | Width | gpm | gph | Wash | Rinse | Dwell | ||
Single Tank Stationary Rack Chemical Sanitizing[1] |
||||||||
A | 20x20 | N/A | 61.6 | 60 | 45 | 15 | [2] [3] [4] [5] | |
A-3D | 20x20 | N/A | 61.6 | 60 | 45 | 15 | [2] [3] [4] [5] [6] [7] | |
A-3D-S | 20x20 | N/A | 61.6 | 60 | 45 | 15 | [2] [3] [4] [5] [6] [7] | |
A-B | 20x20 | N/A | 70 | 60 | 45 | 15 | [2] [4] [5] [8] [9] | |
AC | 20x20 | N/A | 61.6 | 60 | 45 | 15 | [2] [3] [4] [5] | |
AC-3D | 20x20 | N/A | 61.6 | 60 | 45 | 15 | [2] [3] [4] [5] [6] [7] | |
AC-3D-S | 20x20 | N/A | 61.6 | 60 | 45 | 15 | [2] [3] [4] [5] [6] [7] | |
AD-25 | 20x20 | N/A | 71 | 45 | 30 | 15 | [2] [4] [5] [10] | |
AF | 20x20 | N/A | 81.4 | 45 | 30 | 15 | [2] [3] [4] [5] [11] | |
AF-3D | 20x20 | N/A | 81.4 | 45 | 30 | 15 | [2] [3] [4] [5] [6] [7] [11] | |
AF-3D-S | 20x20 | N/A | 81.4 | 45 | 30 | 15 | [2] [3] [4] [5] [6] [7] [11] | |
AF-B | 20x20 | N/A | 92.5 | 45 | 30 | 15 | [2] [4] [5] [8] [9] [12] [13] | |
AF-ES | 20x20 | N/A | 35.5 | 50 | 30 | 10 | [2] [4] [5] [6] [7] [14] | |
AFC | 20x20 | N/A | 81.4 | 45 | 30 | 15 | [2] [3] [4] [5] [11] | |
AFC-3D | 20x20 | N/A | 81.4 | 45 | 30 | 15 | [2] [3] [4] [5] [6] [7] [11] | |
AFC-3D-S | 20x20 | N/A | 81.4 | 45 | 30 | 15 | [2] [3] [4] [5] [6] [7] [11] | |
AFC-ES | 20x20 | N/A | 34.7 | 50 | 30 | 10 | [2] [4] [5] [6] [7] [15] | |
AFW | 20x20 | N/A | 81.4 | 45 | 30 | 15 | [2] [3] [4] [5] [11] | |
AFWC | 20x20 | N/A | 81.4 | 45 | 30 | 15 | [2] [3] [4] [5] [11] | |
AH | 20x20 | N/A | 50.6 | 75 | 60 | 15 | [2] [3] [4] [5] | |
AH-3D | 20x20 | N/A | 50.6 | 75 | 60 | 15 | [2] [3] [4] [5] [6] [7] | |
AH-3D-S | 20x20 | N/A | 50.6 | 75 | 60 | 15 | [2] [3] [4] [5] [6] [7] | |
AH-B | 20x20 | N/A | 57.5 | 75 | 60 | 15 | [2] [4] [5] [8] [9] | |
AHC | 20x20 | N/A | 50.6 | 75 | 60 | 15 | [2] [3] [4] [5] | |
AHC-3D | 20x20 | N/A | 50.6 | 75 | 60 | 15 | [2] [3] [4] [5] [6] [7] | |
AHC-3D-S | 20x20 | N/A | 50.6 | 75 | 60 | 15 | [2] [3] [4] [5] [6] [7] | |
AWS | 20x20 | N/A | 29.4 | 50 | 22 | 18 | [2] [4] [38] | |
AWS-H | 20x20 | N/A | 36 | 50 | 22 | 18 | [2] [4] [17] [39] | |
ET-A | 20x20 | N/A | 40.8 | 60 | 45 | 15 | [2] [4] [16] [17] [18] [20] | |
ET-A-3 | 20x20 | N/A | 48 | 60 | 45 | 15 | [2] [4] [16] [17] [19] [20] | |
ET-A-M | 20x20 | N/A | 48 | 60 | 45 | 15 | [2] [4] [16] [17] [19] [20] | |
ET-AF | 20x20 | N/A | 51 | 45 | 30 | 15 | [2] [4] [16] [17] [18] [20] [21] | |
ET-AF-3 | 20x20 | N/A | 60 | 45 | 30 | 15 | [2] [4] [16] [17] [19] [20] [22] [23] | |
ET-AF-M | 20x20 | N/A | 60 | 45 | 30 | 15 | [2] [4] [16] [17] [19] [20] [22] [23] | |
ET-AH | 20x20 | N/A | 34 | 75 | 60 | 15 | [2] [4] [16] [17] [18] [20] | |
ET-AH-3 | 20x20 | N/A | 40 | 75 | 60 | 15 | [2] [4] [16] [17] [19] [20] | |
ET-AH-M | 20x20 | N/A | 40 | 75 | 60 | 15 | [2] [4] [16] [17] [19] [20] | |
L-60-3D | 20x20 | N/A | 66 | 36 | 15 | 9 | [2] [4] [5] [7] [24] [25] | |
L-60-3D-K | 20x20 | N/A | 66 | 36 | 15 | 9 | [2] [4] [5] [7] [24] [25] | |
L-60-3D-K-S | 20x20 | N/A | 66 | 36 | 15 | 9 | [2] [4] [5] [7] [24] [25] | |
L-60-3D-S | 20x20 | N/A | 66 | 36 | 15 | 9 | [2] [4] [5] [7] [24] [25] | |
L-60-3DC | 20x20 | N/A | 66 | 36 | 15 | 9 | [2] [4] [5] [7] [24] [25] | |
L-60-3DC-K | 20x20 | N/A | 66 | 36 | 15 | 9 | [2] [4] [5] [7] [24] [25] | |
L-60-3DC-K-S | 20x20 | N/A | 66 | 36 | 15 | 9 | [2] [4] [5] [7] [24] [25] | |
L-60-3DC-S | 20x20 | N/A | 66 | 36 | 15 | 9 | [2] [4] [5] [7] [24] [25] | |
L-60-3DW | 20x20 | N/A | 66 | 36 | 15 | 9 | [2] [4] [5] [7] [24] [25] | |
L-60-3DW-K | 20x20 | N/A | 66 | 36 | 15 | 9 | [2] [4] [5] [7] [24] [25] | |
L-60-3DW-K-S | 20x20 | N/A | 66 | 36 | 15 | 9 | [2] [4] [5] [7] [24] [25] | |
L-60-3DW-S | 20x20 | N/A | 66 | 36 | 15 | 9 | [2] [4] [5] [7] [24] [25] | |
L-60-3DWC | 20x20 | N/A | 66 | 36 | 15 | 9 | [2] [4] [5] [7] [24] [25] | |
L-60-3DWC-K | 20x20 | N/A | 66 | 36 | 15 | 9 | [2] [4] [5] [7] [24] [25] | |
L-60-3DWC-K-S | 20x20 | N/A | 66 | 36 | 15 | 9 | [2] [4] [5] [7] [24] [25] | |
L-60-3DWC-S | 20x20 | N/A | 66 | 36 | 15 | 9 | [2] [4] [5] [7] [24] [25] | |
L-72-3D | 20x20 | N/A | 55 | 43 | 19 | 10 | [2] [4] [5] [7] [24] [25] | |
L-72-3D-K | 20x20 | N/A | 55 | 43 | 19 | 10 | [2] [4] [5] [7] [24] [25] | |
L-72-3D-K-S | 20x20 | N/A | 55 | 43 | 19 | 10 | [2] [4] [5] [7] [24] [25] | |
L-72-3D-S | 20x20 | N/A | 55 | 43 | 19 | 10 | [2] [4] [5] [7] [24] [25] | |
L-72-3DC | 20x20 | N/A | 55 | 43 | 19 | 10 | [2] [4] [5] [7] [24] [25] | |
L-72-3DC-K | 20x20 | N/A | 55 | 43 | 19 | 10 | [2] [4] [5] [7] [24] [25] | |
L-72-3DC-K-S | 20x20 | N/A | 55 | 43 | 19 | 10 | [2] [4] [5] [7] [24] [25] | |
L-72-3DC-S | 20x20 | N/A | 55 | 43 | 19 | 10 | [2] [4] [5] [7] [24] [25] | |
L-72-3DW | 20x20 | N/A | 55 | 43 | 19 | 10 | [2] [4] [5] [7] [24] [25] | |
L-72-3DW-K | 20x20 | N/A | 55 | 43 | 19 | 10 | [2] [4] [5] [7] [24] [25] | |
L-72-3DW-K-S | 20x20 | N/A | 55 | 43 | 19 | 10 | [2] [4] [5] [7] [24] [25] | |
L-72-3DW-S | 20x20 | N/A | 55 | 43 | 19 | 10 | [2] [4] [5] [7] [24] [25] | |
L-72-3DWC | 20x20 | N/A | 55 | 43 | 19 | 10 | [2] [4] [5] [7] [24] [25] | |
L-72-3DWC-K | 20x20 | N/A | 55 | 43 | 19 | 10 | [2] [4] [5] [7] [24] [25] | |
L-72-3DWC-K-S | 20x20 | N/A | 55 | 43 | 19 | 10 | [2] [4] [5] [7] [24] [25] | |
L-72-3DWC-S | 20x20 | N/A | 55 | 43 | 19 | 10 | [2] [4] [5] [7] [24] [25] | |
L-90-3D | 20x20 | N/A | 44 | 50 | 30 | 10 | [2] [4] [5] [7] [24] [25] | |
L-90-3D-K | 20x20 | N/A | 44 | 50 | 30 | 10 | [2] [4] [5] [7] [24] [25] | |
L-90-3D-K-S | 20x20 | N/A | 44 | 50 | 30 | 10 | [2] [4] [5] [7] [24] [25] | |
L-90-3D-S | 20x20 | N/A | 44 | 50 | 30 | 10 | [2] [4] [5] [7] [24] [25] | |
L-90-3DC | 20x20 | N/A | 44 | 50 | 30 | 10 | [2] [4] [5] [7] [24] [25] | |
L-90-3DC-K | 20x20 | N/A | 44 | 50 | 30 | 10 | [2] [4] [5] [7] [24] [25] | |
L-90-3DC-K-S | 20x20 | N/A | 44 | 50 | 30 | 10 | [2] [4] [5] [7] [24] [25] | |
L-90-3DC-S | 20x20 | N/A | 44 | 50 | 30 | 10 | [2] [4] [5] [7] [24] [25] | |
L-90-3DW | 20x20 | N/A | 44 | 50 | 30 | 10 | [2] [4] [5] [7] [24] [25] | |
L-90-3DW-K | 20x20 | N/A | 44 | 50 | 30 | 10 | [2] [4] [5] [7] [24] [25] | |
L-90-3DW-K-S | 20x20 | N/A | 44 | 50 | 30 | 10 | [2] [4] [5] [7] [24] [25] | |
L-90-3DW-S | 20x20 | N/A | 44 | 50 | 30 | 10 | [2] [4] [5] [7] [24] [25] | |
L-90-3DWC | 20x20 | N/A | 44 | 50 | 30 | 10 | [2] [4] [5] [7] [24] [25] | |
L-90-3DWC-K | 20x20 | N/A | 44 | 50 | 30 | 10 | [2] [4] [5] [7] [24] [25] | |
L-90-3DWC-K-S | 20x20 | N/A | 44 | 50 | 30 | 10 | [2] [4] [5] [7] [24] [25] | |
L-90-3DWC-S | 20x20 | N/A | 44 | 50 | 30 | 10 | [2] [4] [5] [7] [24] [25] | |
SS-25 | 20x20 | N/A | 71 | 45 | 30 | 15 | [2] [4] [5] [10] | |
W | 20x20 | N/A | 61.6 | 60 | 45 | 15 | [2] [3] [4] [5] | |
WC | 20x20 | N/A | 61.6 | 60 | 45 | 15 | [2] [3] [4] [5] | |
WH | 20x20 | N/A | 50.6 | 75 | 60 | 15 | [2] [3] [4] [5] | |
WHC | 20x20 | N/A | 50.6 | 75 | 60 | 15 | [2] [3] [4] [5] | |
WS | 20x20 | N/A | 35.5 | 50 | 30 | 10 | [2] [4] [5] [6] [7] [14] | |
WSC | 20x20 | N/A | 34.7 | 50 | 30 | 10 | [2] [4] [5] [6] [7] [15] | |
[1] Available with moisture vapor removal system. [2] Recirculated pumped rinse minimum 50 ppm available chlorine. [3] Total water demand 2.2 gallons per complete wash, rinse, and flush cycle at 120°F. [4] Unit accepted when operated as a chemical sanitizing dishwasher/glasswasher provided it is installed with an American Dish Service model 64-0001 or 64-0010 chemical sanitizer feeder. [5] Unit Certified to ASSE 1004. [6] Units accepted with American Dish Service model 64-0024 dispensing system for dispensing of solid detergent and rinse additive. [7] Unit also accepted with 3 door operation. [8] Total water demand 2.5 gallons per complete wash, rinse, and flush cycle at 130°F. [9] Unit accepted when manufactured as a corner dishwasher. [10] Total water demand 1.93 gallons per complete wash, rinse, and flush cycle at 120°F. [11] Unit also accepted when used with a 60 second wash cycle, 45 second rinse cycle and 15 second dwell cycle that yields a water consumption rate of 61.6 gallons per hour, or when used with a 75 second wash cycle, 60 second rinse cycle and 15 second dwell cycle that yields a water consumption rate of 50.6 gallons per hour. [12] Unit also accepted when used with a 60 second wash cycle, 45 second rinse cycle and 15 second dwell cycle that yields a water consumption rate of 70 gallons per hour, or when used with a 75 second was cycle, 60 second rinse cycle and 15 second dwell cycle that yields a water consumption rate of 57.5 gallons per hour. [13] Unit also accepted when used with a 30 second prewash cycle, 15 second drain cycle, 60 second fill and wash cycle, 15 second drain cycle and 30 second fill and rinse cycle that yields a water consumption rate of 115 gallons per hour. [14] Unit also accepted when used with a 60 second wash cycle, 45 second rinse cycle and 15 second dwell cycle that yields a water consumption rate of 26.9 gallons per hour, or when used with a 75 second wash cycle, 60 second rinse cycle and 15 second dwell cycle that yields a water consumption rate of 21.7 gallons per hour. [15] Unit also accepted when used with a 60 second wash cycle, 45 second rinse cycle and 15 second dwell cycle that yields a water consumption rate of 26.5 gallons per hour, or when used with a 75 second wash cycle, 60 second rinse cycle and 15 second dwell cycle that yields a water consumption rate of 21.5 gallons per hour. [16] Unit also accepted with a pump added to the drain line. [17] Unit also accepted with a sustainer heater. [18] Total water demand 1.7 gallons per complete wash, rinse, and flush cycle at 120°F. [19] Total water demand 2.0 gallons per complete wash, rinse, and flush cycle at 120°F. [20] Unit also accepted with –PH added to the model number to indicate a pumped drain and sustainer heater option has been added and unit also accepted with –S added to the model number indicating stainless steel panel option has been added. [21] Unit also accepted when used with a 60 second wash cycle, 45 second rinse cycle and 15 second dwell cycle that yields a water consumption rate of 40.8 gallons per hour, or when used with a 75 second wash cycle, 60 second rinse cycle and 15 second dwell cycle that yields a water consumption rate of 34 gallons per hour. [22] Unit also accepted when used with a 60 second wash cycle, 45 second rinse cycle and 15 second dwell cycle that yields a water consumption rate of 48 gallons per hour, or when used with a 75 second wash cycle, 60 second rinse cycle and 15 second dwell cycle that yields a water consumption rate of 40 gallons per hour. [23] Unit also accepted when used with a 90 second fill and wash cycle, 15 second drain cycle, 30 second rinse cycle and 15 second drain cycle that yields a water consumption rate of 80 gallons per hour. [24] Total water demand 1.2 gallons per complete wash, rinse, and flush cycle at 120°F. [25] Unit also accepted when used with a 60 second wash cycle, 45 second rinse cycle and 15 second dwell cycle that yields a water consumption rate of 33.6 gallons per hour, or when used with a 75 second wash cycle, 60 second rinse cycle and a 15 second dwell cycle that yields a water consumption rate of 27.6 gallons per hour. [38] Unit accepted when used with a 90 second time cycle with a minimum of 50 second wash cycle, a minimum of 22 second rinse cycle and that yields a water consumption rate of 30 gallons/hr, or when used with a 120 second time cycle with a 60 second minimum wash cycle, a minimum of 37 second rinse cycle and that yields a water consumption rate of 24 gallons/hr or when used with a 150 second time cycle with a minimum of 75 seconds wash cycle, a minimum 52 seconds rinse cycle and that yields a water consumption rate of 20 gallons/hr. [39] Unit accepted when used with a 90 second time cycle with a minimum of 50 second wash cycle, a minimum 22 second rinse cycle and that yields a water consumption rate of 36 gallons/hr, or when used with a 120 second time cycle with a 60 second minimum wash cycle, a minimum 37 second rinse cycle and that yields a water consumption rate of 29 gallons/hr or when used with a 150 second time cycle with a minimum of 75 seconds wash cycle, a minimum 52 seconds rinse cycle and that yields a water consuption rate of 24 gallons/hr. |
||||||||
Double Tank Stationary Rack Chemical Sanitizing[1] |
||||||||
5 | 2*20x20 | N/A | 89.6 | 60 | 45 | 15 | [2] [4] [5] [26] [27] | |
5-AG | 2*20x20 | N/A | 118.4 | 45 | 30 | 15 | [2] [4] [5] [26] [27] [28] | |
5-AGS | 2*20x20 | N/A | 118.4 | 45 | 30 | 15 | [2] [4] [5] [26] [27] [28] | |
5-AH | 2*20x20 | N/A | 73.6 | 75 | 60 | 15 | [2] [4] [5] [26] [27] | |
5-AHS | 2*20x20 | N/A | 73.6 | 75 | 60 | 15 | [2] [4] [5] [26] [27] | |
5-CD-LF | 2*20x20 | N/A | 118.4 | 45 | 30 | 15 | [2] [4] [5] [26] [27] [28] | |
5-CD-RF | 2*20x20 | N/A | 118.4 | 45 | 30 | 15 | [2] [4] [5] [26] [27] [28] | |
5-S | 2*20x20 | N/A | 89.6 | 60 | 45 | 15 | [2] [4] [5] [26] [27] | |
5AGES | 2*20x20 | N/A | 62.5 | 50 | 7 | 33 | [2] [4] [5] [26] [29] [30] [31] | |
WS2 | 2*20x20 | N/A | 62.5 | 50 | 7 | 33 | [2] [4] [5] [26] [29] [30] [31] | |
[1] Available with moisture vapor removal system. [2] Recirculated pumped rinse minimum 50 ppm available chlorine. [4] Unit accepted when operated as a chemical sanitizing dishwasher/glasswasher provided it is installed with an American Dish Service model 64-0001 or 64-0010 chemical sanitizer feeder. [5] Unit Certified to ASSE 1004. [26] Unit also Certified by NSF to the requirements of ASSE 1004. [27] Total water demand 3.2 gallons per complete wash, rinse, and flush cycle at 120°F. [28] Unit also accepted when used with a 60 second wash cycle, 45 second rinse cycle and 15 second dwell cycle that yields a water consumption rate of 89.6 gallons per hour, or when used with a 75 second wash cycle, 60 second rinse cycle and 15 second dwell cycle that yields a water consumption rate rate of 73.6 gallons per hour. [29] Machine is also approved at time cycles longer than the listed minimums. [30] Unit also accepted when used with a 60 second wash cycle, 45 second rinse cycle and 15 second dwell cycle that yields a water consumption rate of 49.8 gallons per hour, or when used with a 75 second wash cycle, 60 second rinse cycle and 15 second dwell cycle that yields a water consumption rate rate of 40.9 gallons per hour. [31] Total water demand 1.78 gallons per complete wash, rinse, and flush cycle at 120°F. |
||||||||
Single Tank Stationary Rack Hot Water Sanitizing[1] |
||||||||
HT-25 | 20x20 | N/A | 47.2 | 35 | 10 | 0 | [5] [26] [32] [33] [34] [35] | |
HT-34 | 20x20 | N/A | 61.5 | 57 | 11 | 0 | [5] | |
[1] Available with moisture vapor removal system. [5] Unit Certified to ASSE 1004. [26] Unit also Certified by NSF to the requirements of ASSE 1004. [32] Total water demand .85 gallons per complete wash, rinse, and flush cycle at 158°F. [33] Unit also accepted when used with a 50 second wash cycle and a water consumption rate of 46.75 gallons per hour. [34] Unit also accepted as a corner loading machine when used with a 35 second wash cycle, 10 second rinse and 0 second dwell cycle that yields a water consumption rate of 58.65 gallons per hour. [35] Total water demand 0.65 gallons per complete wash, rinse cycle, at tank 160ºF, final rinse 180°F. |
||||||||
COMPONENTS: |
||||||||
Single Tank Stationary Rack Chemical Sanitizing[1] |
||||||||
HT-25 | 20x20 | N/A | 47.2 | 35 | 10 | 0 | [5] [26] [33] [36] [37] | |
HT-34 | 20x20 | N/A | 61.5 | 57 | 11 | 0 | [5] | |
[1] Available with moisture vapor removal system. [5] Unit Certified to ASSE 1004. [26] Unit also Certified by NSF to the requirements of ASSE 1004. [33] Unit also accepted when used with a 50 second wash cycle and a water consumption rate of 46.75 gallons per hour. [36] Unit also accepted with 120°F wash, 120°F final rinse and 50 ppm chlorine sanitized final rinse. [37] Total water demand 0.65 gallons per complete wash, rinse cycle, at tank 135°F, final rinse 135°F. |
STATIONARY RACK POT, PAN, AND UTENSIL WASHING MACHINES
Final Rinse | ||||||||
(20 psi) | Operating Time | |||||||
Model | Rack Size | Flow | Usage | (seconds) | Footnotes | |||
Number | Width | gpm | gph | Wash | Rinse | Dwell | ||
Single Tank Stationary Rack Hot Water Sanitizing (Dual Sanitizing Mode Machine)[1] [2] |
||||||||
HT-34 | 20x20 | N/A | 61.5 | 57 | 11 | 0 | ||
[1] Available with moisture vapor removal system. [2] Unit Certified to ASSE 1004. |
||||||||
COMPONENTS: |
||||||||
Single Tank Stationary Rack Chemical Sanitizing (Dual Sanitizing Mode Machine)[1] [2] |
||||||||
HT-34 | 20x20 | N/A | 61.5 | 57 | 11 | 0 | ||
[1] Available with moisture vapor removal system. [2] Unit Certified to ASSE 1004. |
American Dish Service Corporation | |
900 Blake Street | |
Eldwardsville, KS 66111 | |
United States | |
913-422-3700 | |
Visit this company's website |
Facility : # 2 Canada
STATIONARY RACK DISHWASHING MACHINES
Final Rinse | ||||||||
(20 psi) | Operating Time | |||||||
Model | Rack Size | Flow | Usage | (seconds) | Footnotes | |||
Number | Width | gpm | gph | Wash | Rinse | Dwell | ||
Single Tank, Hot Water, Undercounter Dishwasher[1] |
||||||||
HUB-40 | 20x20 | N/A | 24 | 70 | 14 | 6 | ||
[1] May have suffix M followed by number 1 - 99. |
Auto-Chlor System, Inc. | |
746 Poplar Avenue | |
Memphis, TN 38105 | |
United States | |
901-579-2300 | |
Visit this company's website |
Facility : Memphis, TN
CONVEYOR DISHWASHING MACHINES
Final Rinse | ||||||||
(20 psi) | Conveyor Speed | |||||||
Model | Conveyor | Flow | Usage | (Max.) | Footnotes | |||
Number | Width | gpm | gph | (ft/min.) | ||||
Dual Sanitizing Conveyor Dishwasher |
||||||||
44L1 | 20" | 2.2 | 33 | 6.8 | ||||
44L3 | 20" | 2.2 | 33 | 6.8 | ||||
44R1 | 20" | 2.2 | 33 | 6.8 | ||||
44R3 | 20" | 2.2 | 33 | 6.8 |
GLASSWASHING MACHINES
Glasswashing Machine |
|
UCR |
STATIONARY RACK DISHWASHING MACHINES
Final Rinse | ||||||||
(20 psi) | Operating Time | |||||||
Model | Rack Size | Flow | Usage | (seconds) | Footnotes | |||
Number | Width | gpm | gph | Wash | Rinse | Dwell | ||
Single Tank Door Chemical Sanitizing |
||||||||
A4 | 20x20 | N/A | 38.4 | 56 | 24 | 10 | [1] [2] [3] [4] [5] [6] [7] | |
A5 | 20x20 | N/A | 38.4 | 56 | 24 | 10 | [1] [2] [3] [4] [5] [6] [7] | |
A4IW | 20x20 | N/A | 38.4 | 56 | 24 | 10 | [1] [2] [3] [4] [5] | |
A5IW | 20x20 | N/A | 38.4 | 56 | 24 | 10 | [1] [2] [3] [4] [5] | |
AC | 20x20 | N/A | 30.2 | 56 | 24 | 10 | [1] [2] [3] [4] [5] [6] [7] [8] [9] [10] | |
AC-HT | 20x20 | N/A | 35.2 | 72 | 28 | 20 | [1] [11] [12] [13] | |
M4 | 20x20 | N/A | 41.3 | 56 | 24 | 10 | [1] [2] [3] [4] | |
U38 | 20x20 | N/A | 32.7 | 56 | 24 | 10 | [1] [2] [3] [4] | |
U34 | 20x20 | N/A | 30.2 | 56 | 24 | 10 | [1] [2] [3] [4] [6] [7] [9] [10] | |
U34PT-10 | 20x20 | N/A | 38.5 | 56 | 24 | 10 | [1] [2] [3] [4] [6] [7] [8] [9] | |
UHT | 20x20 | N/A | 35.2 | 72 | 28 | 20 | [1] [11] [12] [13] | |
[1] Recirculated pumped rinse minimum 50 ppm available chlorine. [2] Total water demands 1.04 gal. per complete wash, rinse cycle at 120°F. [3] Unit also accepted with shorter 72 sec. time cycle in which the following would apply: Dwell - 10 sec. Final rinse usage: 47.7 gph for straight, 46.7 gph for corner and 36.5 gph for front load @ 130ºF. Rinse - 17 sec. Wash - 45 sec. [4] Unit also accepted with shorter 60 sec. time cycle in which the following would apply: Dwell - 10 sec. Final rinse usage: 57.1 gph for straight, 61.1 gph for corner, and 41.7 gph for front load @ 130°F. Rinse - 15 sec. Wash - 35 sec. [5] With or without suffix V to indicate a ventless system. [6] Unit accepted with or without integrated booster heater. [7] With or without suffix B to indicate an integrated booster heater. [8] Also acceptable with or without drain tables. [9] Unit accepted with or without sustainer heater. [10] Models have been approved with a post sanitizing rinse. Machine with post sanitizing rinse cycles will have a switch to turn the post sanitizing rinse on and off. Sanitizer Concentration must be checked with post sanitizing rinse off. Total water demand per cycle is 2.0 gal/cycle. Cycle times are 56s wash, 10s dwell, 24s sanitize, 10s dwell, 20s fresh water final rinse. [11] Total water demands 1.47 gal. per complete wash and rinse cycle at 120°F. Lower water supply temperature may extend cycle time. [12] Total water demands 1.47 gal. per complete wash and rinse cycle at 140°F. Lower water supply temperatures can be used, the internal booster heater will compensate for lower water supply temperatures by extending wash cycle to allow extra temperature rise required to meet sanitation requirements. [13] Unit has been approved for both chemical sanitizing and hot water sanitizing. Machines operating in chemical sanitizing mode will have a supply source for sanitizing chemical and operate at minimum wash and rinse temperatures of 120°F. Recirculated pumped rinse minimum 50 ppm available chlorine. |
||||||||
Single Tank Door Double Rack Chemical Sanitizing |
||||||||
D2 | 2*20x20 | N/A | 72.8 | 56 | 24 | 10 | [1] [5] [6] [7] [14] [15] [16] | |
D2CL | 2*20x20 | N/A | 71.8 | 56 | 24 | 10 | [1] [5] [6] [7] [14] [15] [16] | |
D2CR | 2*20x20 | N/A | 71.8 | 56 | 24 | 10 | [1] [5] [6] [7] [14] [15] [16] | |
[1] Recirculated pumped rinse minimum 50 ppm available chlorine. [5] With or without suffix V to indicate a ventless system. [6] Unit accepted with or without integrated booster heater. [7] With or without suffix B to indicate an integrated booster heater. [14] Total water demands 1.94 gal. per complete wash, rinse cycle at 120°F. [15] Unit also accepted with longer 108 sec. time cycle in which the following would apply: Dwell - 20 sec. Final rinse usage: 61.1 gph for straight 60.3 gph corner @ 120°F Rinse - 32 sec. Wash - 56 sec. [16] Unit also accepted with shorter 72 sec. time cycle in which the following would apply: Dwell - 12 sec. Final rinse usage: 90.2 gph for straight and 88.3 gph for corner @ 130°F. Rinse - 15 sec. Wash - 45 sec. |
||||||||
Single Tank Door Hot Water Sanitizing (Dual Mode Sanitizing Machine) |
||||||||
A6 | 20x20 | 4.1 | 49.7 | 35 | 10 | 0 | [13] [17] [18] [20] | |
A6 | 20x20 | 4.1 | 47.6 | 35 | 10 | 0 | [13] [17] [19] [20] | |
AC-HT | 20x20 | N/A | 35.2 | 72 | 28 | 20 | [12] [13] [17] | |
UHT | 20x20 | N/A | 35.2 | 72 | 28 | 20 | [12] [13] [17] | |
[12] Total water demands 1.47 gal. per complete wash and rinse cycle at 140°F. Lower water supply temperatures can be used, the internal booster heater will compensate for lower water supply temperatures by extending wash cycle to allow extra temperature rise required to meet sanitation requirements. [13] Unit has been approved for both chemical sanitizing and hot water sanitizing. Machines operating in chemical sanitizing mode will have a supply source for sanitizing chemical and operate at minimum wash and rinse temperatures of 120°F. Recirculated pumped rinse minimum 50 ppm available chlorine. [17] Unit has been approved for both chemical sanitizing and hot water sanitizing. When operating in hot water sanitizing mode no sanitizing chemical will be supplied and minimum wash temperature shall be 150°F and minimum rinse supply temp shall be 180°F. [18] Unit is a straight load. [19] Unit is a corner load. [20] Total water demands 0.69 gal. per complete wash and rinse cycle. Lower water supply temperatures can be used, the internal booster heater will compensate for lower water supply temperatures by extending wash cycle to allow extra temperature rise required to meet sanitation requirements. |
Auto-Chlor System, Inc. | |
746 Poplar Avenue | |
Memphis, TN 38120 | |
United States | |
901-684-0600 | |
Visit this company's website |
Facility : Edwardsville, KS
CONVEYOR DISHWASHING MACHINES
Final Rinse | ||||||||
(20 psi) | Conveyor Speed | |||||||
Model | Conveyor | Flow | Usage | (Max.) | Footnotes | |||
Number | Width | gpm | gph | (ft/min.) | ||||
Multiple Tank Rack Conveyor Dishwasher - Chemical Sanitizing |
||||||||
AC-44 | 20" | 2 | 120 | 6.8 | [1] | |||
AC-44-RC | 20" | 2 | 120 | 6.8 | [1] | |||
AC-66 | 20" | 2 | 120 | 6.8 | [1] | |||
[1] Unit accepted when operated as a chemical sanitizing dishwasher provided it is installed with a Beta Technology Model H9200SR or H9300S chemical sanitizer feeder. |
||||||||
Multiple Tank Rack Conveyor Dishwasher - Hot Water Sanitizing |
||||||||
AC-44 | 20" | 2 | 120 | 6.8 | ||||
AC-44-RC | 20" | 2 | 120 | 6.8 | ||||
AC-66 | 20" | 2 | 120 | 6.8 |
Champion Industries, Inc. | |
3765 Champion Boulevard | |
Winston-Salem, NC 27105 | |
United States | |
336-661-1556 | |
Visit this company's website |
Facility : Winston-Salem, NC
CONVEYOR DISHWASHING MACHINES
Final Rinse | ||||||||
(20 psi) | Conveyor Speed | |||||||
Model | Conveyor | Flow | Usage | (Max.) | Footnotes | |||
Number | Width | gpm | gph | (ft/min.) | ||||
Multiple Tank Rack Conveyor, Hot Water Sanitizing |
||||||||
USN72-135 | 20x20 | 4.75 | 285 | 3.5 | [1] [2] | |||
USN72-185 | 20x20 | 4.75 | 285 | 5.1 | [1] [2] | |||
USN72-250 | 20x20 | 4.75 | 285 | 7 | [1] [2] | |||
USN72-250-SP | 20x20 | 4 | 240 | 7 | [1] [2] | |||
USN72-60 | 20x20 | 4.75 | 285 | 1.7 | [1] [2] | |||
USN72-85 | 20x20 | 4.75 | 285 | 2.4 | [1] [2] | |||
[1] Available as a standard dishmachine set into continuous table with conveyor. [2] Make-up water is provided from final rinse source of supply. Sizing of water heater should be based upon this additional demand. Not to exceed 2 g.p.m. |
||||||||
Multiple Tank Rackless Conveyor, Hot Water Sanitizing |
||||||||
EEUCCW6 | 29 | 2.2 | 132 | 10.2 | [3] [4] [5] [6] [7] | |||
EUCC6 | 24 | 0.8 | 48 | 8.5 | [3] [4] [5] [6] [8] [9] | |||
EUCC8 | 24 | 0.8 | 48 | 9.5 | [3] [4] [5] [6] [8] [9] | |||
EUCCW6 | 29 | .95 | 57 | 8.5 | [3] [4] [5] [6] [8] [9] | |||
EUCCW8 | 29 | .97 | 58.2 | 9.5 | [3] [4] [5] [6] [9] | |||
[3] Make-up water for wash tank is provided from power rinse tank. [4] Unit may be equipped with an optional integral booster. This booster should be sized to supply the required heat rise to provide the proper final rinse operating temperature of 180°F to 195°F. [5] The peg spacing for E Series rackless conveyor dishmachines is 2.2 inches. [6] Unit may be equipped with an optional heat recovery unit and/or an optional blower/dryer unit and/or hinged access door system. [7] Final rinse water usage is 76 GPH at conveyor speed of 6.8 ft/min. [8] Tested at final rinse of 10 psi. [9] Models with suffix -HRU indicates Heat Recovery Unit. |
||||||||
Single Tank Rack Conveyor, Hot Water Sanitizing |
||||||||
44 PRO | 20x20 | 1.65 | 100.18 | 5.8 | [1] [4] [6] | |||
54 PRO | 54 | 1.65 | 98.39 | 5.4 | [1] [4] [6] | |||
66 PRO | 20x20 | 1.65 | 100.18 | 5.8 | [1] [4] [6] | |||
66FF PRO | 20x20 | 1.65 | 100.18 | 5.8 | [1] [4] [6] | |||
76 PRO | 76 | 1.65 | 98.39 | 5.4 | [1] [4] [6] | |||
76FF PRO | 76 | 1.65 | 98.39 | 5.4 | [1] [4] [6] | |||
80HD PRO | 20x20 | 1.65 | 100.18 | 5.8 | [1] [4] [6] | |||
90HD PRO | 90 | 1.65 | 98.39 | 5.4 | [1] [4] [6] | |||
[1] Available as a standard dishmachine set into continuous table with conveyor. [4] Unit may be equipped with an optional integral booster. This booster should be sized to supply the required heat rise to provide the proper final rinse operating temperature of 180°F to 195°F. [6] Unit may be equipped with an optional heat recovery unit and/or an optional blower/dryer unit and/or hinged access door system. |
||||||||
Single Tank Rackless Conveyor, Hot Water Sanitizing |
||||||||
EUCC4 | 24 | 0.8 | 48 | 6.3 | [3] [4] [5] [6] | |||
EUCCW4 | 29 | .96 | 58 | 6.3 | [3] [4] [5] [6] [8] [9] | |||
[3] Make-up water for wash tank is provided from power rinse tank. [4] Unit may be equipped with an optional integral booster. This booster should be sized to supply the required heat rise to provide the proper final rinse operating temperature of 180°F to 195°F. [5] The peg spacing for E Series rackless conveyor dishmachines is 2.2 inches. [6] Unit may be equipped with an optional heat recovery unit and/or an optional blower/dryer unit and/or hinged access door system. [8] Tested at final rinse of 10 psi. [9] Models with suffix -HRU indicates Heat Recovery Unit. |
||||||||
Two Tank Rack Conveyor, Hot Water Sanitizing |
||||||||
100HD PRO | 100 | 1.68 | 100.8 | 9.5 | [1] [4] [6] | |||
64 PRO | 64 | 1.68 | 100.8 | 9.5 | [1] [4] [6] | |||
86 PRO | 86 | 1.68 | 100.8 | 9.5 | [1] [4] [6] | |||
86FF PRO | 90 | 1.68 | 100.8 | 9.5 | [1] [4] [6] | |||
[1] Available as a standard dishmachine set into continuous table with conveyor. [4] Unit may be equipped with an optional integral booster. This booster should be sized to supply the required heat rise to provide the proper final rinse operating temperature of 180°F to 195°F. [6] Unit may be equipped with an optional heat recovery unit and/or an optional blower/dryer unit and/or hinged access door system. |
NOTE: All machines Listed leg mounted or on pedestal base.
CONVEYOR POT, PAN, AND UTENSIL WASHING MACHINES
Final Rinse | ||||||||
(20 psi) | Conveyor Speed | |||||||
Model | Conveyor | Flow | Usage | (Max.) | Footnotes | |||
Number | Width | gpm | gph | (ft/min.) | ||||
Single Tank Rack Conveyor, Pot and Pan |
||||||||
44 PRO | 44 | 1.65 | 100.18 | 4.5 | [1] [2] [3] | |||
54 PRO | 54 | 1.65 | 98.39 | 5.4 | [1] [2] [3] | |||
66 PRO | 66 | 1.65 | 100.18 | 4.5 | [1] [2] [3] | |||
66FF PRO | 66 | 1.65 | 100.18 | 4.5 | [1] [2] [3] | |||
76 PRO | 76 | 1.65 | 98.39 | 5.4 | [1] [2] [3] | |||
76FF PRO | 76 | 1.65 | 98.39 | 5.4 | [1] [2] [3] | |||
80HD PRO | 80 | 1.65 | 100.18 | 4.5 | [1] [2] [3] | |||
90HD PRO | 90 | 1.65 | 98.39 | 5.4 | [1] [2] [3] | |||
[1] Available as a standard dishmachine set into continuous table with conveyor. [2] Unit may be equipped with an optional integral booster. This booster should be sized to supply the required heat rise to provide the proper final rinse operating temperature of 180°F to 195°F. [3] Unit may be equipped with an optional heat recovery unit and/or an optional blower/dryer unit and/or hinged access door system. |
||||||||
Two Tank Rack Conveyor, Hot Water Sanitizing, Pot And Pan |
||||||||
100HD PRO | 100 | 1.68 | 100.8 | 4.6 | [1] [2] [3] | |||
64 PRO | 64 | 1.68 | 100.8 | 4.6 | [1] [2] [3] | |||
86 PRO | 86 | 1.68 | 100.8 | 4.6 | [1] [2] [3] | |||
86FF PRO | 190 | 1.68 | 100.8 | 4.6 | [1] [2] [3] | |||
[1] Available as a standard dishmachine set into continuous table with conveyor. [2] Unit may be equipped with an optional integral booster. This booster should be sized to supply the required heat rise to provide the proper final rinse operating temperature of 180°F to 195°F. [3] Unit may be equipped with an optional heat recovery unit and/or an optional blower/dryer unit and/or hinged access door system. |
STATIONARY RACK DISHWASHING MACHINES
Final Rinse | ||||||||
(20 psi) | Operating Time | |||||||
Model | Rack Size | Flow | Usage | (seconds) | Footnotes | |||
Number | Width | gpm | gph | Wash | Rinse | Dwell | ||
Single Tank Door, Chemical Sanitizing |
||||||||
D-LF | 20x20 | 5.2 | 66 | 45 | 14 | 1 | [1] [2] | |
[1] Also available for corner placement. [2] Injector Model CM-47A, 103-A, or "Eco-Temp" 108, or "Eco-Temp" 111; DuBois Hydr-A-Trol Liquid Feeder Model LT-910-038, Beta Technology Series P-4000 Model P-4003 or D-3300, or Champion Feeder Models CH-3000, CH-3500, CH-P33DS or BASF Wyandotte Model SP-1. |
||||||||
Single Tank Door, Hot Water Sanitizing |
||||||||
DH2000 | 20x20 | 4.4 | 49.5 | 40 | 12 | 8 | [1] [3] | |
DH6000 | 20x20 | 5.6 | 39 | 36 | 8 | 16 | [1] [4] [5] [6] [7] [8] | |
DH6000T | 20x20 | 5.6 | 39 | 36 | 8 | 16 | [1] [4] [5] [6] [7] [8] | |
USN10 | 16x16 | .6 | 36 | 33 | 12 | 5 | ||
[1] Also available for corner placement. [3] Total water consumption 0.9 gallons/cycle. [4] Unit may be equipped with an optional integral booster. This booster should be sized to provide the proper final rinse operating temperature of 180°F to 195°F. [5] Unit may be equipped with an optional VHR Heat recovery System. [6] Total water consumption 0.73 gallons/cycle. [7] This unit maybe equipped with optional Detergent and Rinse Aide pumps. [8] Operating rinse pressure 18 PSI. |
NOTE: All machines Listed leg mounted or on pedestal base.
STATIONARY RACK POT, PAN, AND UTENSIL WASHING MACHINES
Final Rinse | ||||||||
(20 psi) | Operating Time | |||||||
Model | Rack Size | Flow | Usage | (seconds) | Footnotes | |||
Number | Width | gpm | gph | Wash | Rinse | Dwell | ||
Single Tank Stationary Rack, Hot Water Sanitizing |
||||||||
DH6000 | 20x20 | 5.6 | 26 | 94 | 10 | 16 | [1] [2] [3] [4] [5] [6] [7] | |
DH6000T | 20x20 | 5.6 | 26 | 94 | 10 | 16 | [1] [2] [3] [4] [5] [6] [7] | |
DH6000T VHR C | 20x20 | 4.78 | 21.0 | 94 | 12 | 16 | [2] [3] [7] [8] | |
PP-28 | 28x28 | 12.3 | 82.0 | 120 | 16 | 0 | ||
[1] This unit has been tested and Certified as a combination Dishwashing/Pot, Pan & Utensil Washing Machine. Please reference this model's Listing under Stationary Rack Dishwashing Machines for this model's specifications for that mode of operation. [2] Also available for corner placement. [3] Machine with built in booster heater. [4] Total water consumption 0.93 gallons/cycle. [5] This unit maybe equipped with optional Detergent and Rinse Aide pumps. [6] Operating rinse pressure 18 PSI. [7] Unit may be equipped with an optional VHR Heat recovery System. [8] Operating rinse pressure 13 PSI. |
Facility : Jordan Station, Ontario, Canada
GLASSWASHING MACHINES
"CG" Glasswasher[1] [2] |
|
CG | |
CG-1 | |
CG-2 | |
[1] With suffix CW or CCW. [2] May have suffix M followed by number 1 - 99. |
|
"CG(L)" Glasswasher[1] [2] |
|
CG(L) | |
CG(L)-1 | |
CG(L)-2 | |
[1] With suffix CW or CCW. [2] May have suffix M followed by number 1 - 99. |
|
"CG(L)" Glasswasher[2] |
|
CG(L)-4L | |
CG(L)-4R | |
CG(L)-6L | |
CG(L)-6R | |
[2] May have suffix M followed by number 1 - 99. |
|
CG Glasswasher[2] |
|
CG-4L | |
CG-4R | |
CG-6L | |
CG-6R | |
[2] May have suffix M followed by number 1 - 99. |
STATIONARY RACK DISHWASHING MACHINES
Final Rinse | ||||||||
(20 psi) | Operating Time | |||||||
Model | Rack Size | Flow | Usage | (seconds) | Footnotes | |||
Number | Width | gpm | gph | Wash | Rinse | Dwell | ||
Single Tank, Chemical Sanitizing Undercounter Dishwashing Machine[1] |
||||||||
UL100 | 20x20 | 0.5 | 32 | 90 | 25 | 27 | ||
UL130 | 20x20 | 0.5 | 32 | 90 | 25 | 27 | ||
[1] May have suffix M followed by number 1 - 99. |
||||||||
Single Tank, Dual Rack, Hot Water Sanitizing Undercounter Dishwashing Machine |
||||||||
UH130B MAX | 20x20 | N/A | 18.5 | 227 | 19 | 42 | ||
Single Tank, Hot Water Sanitizing Undercounter Pot, Pan & Utensil Washer[1] |
||||||||
UH330B | 20x20 | N/A | 8.1 | 197 | 20 | 60 | [2] | |
[1] May have suffix M followed by number 1 - 99. [2] May have suffix "-70". |
||||||||
Single Tank, Hot Water, Undercounter Dishwasher[1] |
||||||||
UH100B | 20x20 | N/A | 36.6 | 90 | 25 | 27 | ||
UH130B | 20x20 | N/A | 36.6 | 90 | 25 | 27 | [2] | |
UH140B | 20x20 | N/A | 20.4 | 100 | 15 | 5 | [2] | |
UH170B | 20x20 | N/A | 28.2 | 70 | 15 | 5 | ||
UH200B | 20x20 | N/A | 28.2 | 70 | 15 | 5 | ||
UH230B | 20x20 | N/A | 24 | 70 | 14 | 6 | [2] | |
UH330ADA | 20x20 | N/A | 15.6 | 45 | 13 | 62 | [2] | |
UH330B | 20x20 | N/A | 15.2 | 70 | 20 | 60 | [2] | |
[1] May have suffix M followed by number 1 - 99. [2] May have suffix "-70". |
||||||||
Stationary Rack Pot, Pan, and Utensil Washing Machine[1] |
||||||||
UH230B | 20x20 | N/A | 7.97 | 270 | 14 | 6 | [2] | |
[1] May have suffix M followed by number 1 - 99. [2] May have suffix "-70". |
CMA Dishmachines | |
12700 Knott Street | |
Garden Grove, CA 92841 | |
United States | |
800-854-6417 | |
714-898-8781X 259 |
Facility : Garden Grove, CA
GLASSWASHING MACHINES
Glasswashing Machines |
|
CMA-181GW | |
CMA-181VL | |
GL-X | |
GWX-200 |
STATIONARY RACK DISHWASHING MACHINES
Final Rinse | ||||||||
(20 psi) | Operating Time | |||||||
Model | Rack Size | Flow | Usage | (seconds) | Footnotes | |||
Number | Width | gpm | gph | Wash | Rinse | Dwell | ||
Single Tank Stationary Rack, Chemical Sanitizing |
||||||||
A-1 | 20x20 | 52 | 56 | 57 | 48 | 15 | [1] [2] [6] [7] | |
A-2 | 20x20 | 52 | 74 | 45 | 30 | 15 | [1] [2] [6] [7] | |
A-3 | 20x20 | 52 | 46 | 80 | 55 | 15 | [1] [2] [6] [7] | |
AH-1 | 20x20 | 52 | 56 | 57 | 48 | 15 | [1] [2] [6] [7] | |
AH-2 | 20x20 | 52 | 74 | 45 | 30 | 15 | [1] [2] [6] [7] | |
AH-3 | 20x20 | 52 | 46 | 80 | 55 | 15 | [1] [2] [6] [7] | |
C-1 | 20x20 | 52 | 56 | 57 | 48 | 15 | [1] [2] [6] [7] | |
C-2 | 20x20 | 52 | 74 | 45 | 30 | 15 | [1] [2] [6] [7] | |
C-3 | 20x20 | 52 | 46 | 80 | 55 | 15 | [1] [2] [6] [7] | |
CMA-180 LTC | 20x20 | 50 | 49 | 12 | 0 | [2] [4] | ||
CMA-180 LTCB | 20x20 | 50 | 49 | 12 | 0 | [2] [4] | ||
CMA-180 LTS | 20x20 | 52 | 49 | 12 | 0 | [2] [4] | ||
CMA-180 LTSB | 20x20 | 52 | 49 | 12 | 0 | [2] [4] | ||
CVA-1 | 20x20 | 52 | 35 | 65 | 48 | 7 | [1] [2] [3] [7] | |
CVA-2 | 20x20 | 52 | 46.2 | 53 | 30 | 7 | [1] [2] [3] [7] | |
CVA-3 | 20x20 | 52 | 28.8 | 88 | 55 | 7 | [1] [2] [3] [7] | |
CVA-4 | 20x20 | 52 | 57.5 | 45 | 20 | 7 | [1] [2] [3] [7] | |
CVA-5 | 20x20 | 52 | 65 | 40 | 16 | 7 | [1] [2] [3] [7] | |
EST-AH-1 | 20x20 | 52 | 35 | 65 | 48 | 7 | [1] [2] [3] [6] [7] | |
EST-AH-2 | 20x20 | 52 | 41.74 | 53 | 15 | 7 | [1] [2] [3] [6] [7] | |
EST-AH-3 | 20x20 | 52 | 28.8 | 88 | 55 | 7 | [1] [2] [3] [6] [7] | |
EST-C-1 | 20x20 | 52 | 35 | 65 | 48 | 7 | [1] [2] [3] [6] [7] | |
EST-C-2 | 20x20 | 52 | 41.74 | 53 | 15 | 7 | [1] [2] [3] [6] [7] | |
EST-C-3 | 20x20 | 52 | 28.8 | 88 | 55 | 7 | [1] [2] [3] [6] [7] | |
EST-FL | 20x20 | 52 | 46.2 | 53 | 15 | 7 | [1] [2] [3] [6] [7] | |
EST-VL | 20x20 | 52 | 46.2 | 53 | 15 | 7 | [1] [2] [3] [6] [7] | |
EVA-4 | 20x20 | 52 | 57.5 | 45 | 20 | 7 | [1] [2] [3] [6] [7] | |
EVA-5 | 20x20 | 52 | 65 | 40 | 16 | 7 | [1] [2] [3] [6] [7] | |
EVAC-4 | 20x20 | 52 | 57.5 | 45 | 20 | 7 | [1] [2] [3] [6] [7] | |
EVAC-5 | 20x20 | 52 | 65 | 40 | 16 | 7 | [1] [2] [3] [6] [7] | |
L-1C | 20x20 | 4 | 40 | 58 | 32 | 30 | [1] [2] | |
L-1X | 20x20 | 4 | 40 | 58 | 32 | 30 | [1] [2] [6] | |
L-1X16 | 20x20 | 4 | 40 | 58 | 32 | 30 | [1] [2] [6] | |
S-AH-1 | 20x20 | 52 | 56 | 57 | 48 | 15 | [1] [2] [6] [7] | |
S-AH-2 | 20x20 | 52 | 74 | 45 | 30 | 15 | [1] [2] [6] [7] | |
S-AH-3 | 20x20 | 52 | 46 | 80 | 55 | 15 | [1] [2] [6] [7] | |
VA-1 | 20x20 | 52 | 35 | 65 | 48 | 7 | [1] [2] [3] [7] | |
VA-2 | 20x20 | 52 | 46.2 | 53 | 30 | 7 | [1] [2] [3] [7] | |
VA-3 | 20x20 | 52 | 28.8 | 88 | 55 | 7 | [1] [2] [3] [7] | |
VA-4 | 20x20 | 52 | 57.5 | 45 | 20 | 7 | [1] [2] [3] [7] | |
VA-5 | 20x20 | 52 | 65 | 40 | 16 | 7 | [1] [2] [3] [7] | |
[1] Recirculated pumped rinse minimum 50 ppm available Chlorine or 12.5 ppm iodophor. [2] Suffixes apply to all models: T - Top mount controls; I - Integral scrap trap [3] 1.25 gallons per complete cycle includes .25 gal. fresh water flush. [4] Unit to be installed with a chmical feeder Certified under NSF Standard 29 to provide a minimum of 50 ppm chlorine in the recirculated pumped rinse. Dishmachine to bear the NSF Component Mark. [6] Available with suffix B- Built-on 12KW booster heater for 40°F rise. [7] These models are available either with mechanical timer or with SSC solid-state control timer. |
||||||||
Single Tank Stationary Rack, Hot Water Sanitizing |
||||||||
CMA-180 HTC | 20x20 | N/A | 45.2 | 42 | 12 | 4 | [2] | |
CMA-180 HTCB | 20x20 | N/A | 45.2 | 42 | 12 | 4 | [2] | |
CMA-180 HTS | 20x20 | N/A | 46.9 | 42 | 12 | 4 | [2] | |
CMA-180 HTSB | 20x20 | N/A | 46.9 | 42 | 12 | 4 | [2] | |
CMA-180-T-VL | 20x20 | N/A | 74.4 | 44 | 11 | 0 | ||
CMA-180-THTC | 20x20 | 1.24 | 74.4 | 44 | 11 | 0 | ||
CMA-180-THTCB | 20x20 | 1.24 | 74.4 | 44 | 11 | 0 | ||
CMA-180-THTS | 20x20 | 1.24 | 74.4 | 44 | 11 | 0 | ||
CMA-180-THTSB | 20x20 | 1.24 | 74.4 | 44 | 11 | 0 | ||
CMA-180-VL | 20x20 | N/A | 45.2 | 42 | 12 | 4 | ||
CMA-180VL-FL | 20x20 | N/A | 74.4 | 48 | 12 | 0 | ||
[2] Suffixes apply to all models: T - Top mount controls; I - Integral scrap trap |
||||||||
Undercounter, Hot Water Sanitizing |
||||||||
CMA-180 UC | 20x20 | N/A | 17.95 | 94 | 16 | 10 |
[5] Water consumption 0.96 gallon per cycle.
CMA Dishmachines | |
12700 Knott Street | |
Garden Grove, CA 92841 | |
United States | |
800-854-6417 |
Facility : # 2 Canada
STATIONARY RACK DISHWASHING MACHINES
Final Rinse | ||||||||
(20 psi) | Operating Time | |||||||
Model | Rack Size | Flow | Usage | (seconds) | Footnotes | |||
Number | Width | gpm | gph | Wash | Rinse | Dwell | ||
Single Tank, Hot Water, Undercounter Dishwasher |
||||||||
H-1X | 20x20 | N/A | 28 | 85 | 20 | 45 | [1] [2] | |
UC65e | 20x20 | N/A | 20.14 | 100 | 15 | 5 | ||
[1] May have suffix M followed by number 1 - 99. [2] May have suffix "-70". |
Cobalt Commercial Dishwashers | |
2674 North Service Rd | |
Jordan Station, ON L0R 1S0 | |
Canada | |
905-562-4195 |
Facility : # 2 Canada
STATIONARY RACK DISHWASHING MACHINES
Final Rinse | ||||||||
(20 psi) | Operating Time | |||||||
Model | Rack Size | Flow | Usage | (seconds) | Footnotes | |||
Number | Width | gpm | gph | Wash | Rinse | Dwell | ||
Single Tank, Hot Water, Undercounter Dishwasher[1] [2] |
||||||||
2700 HT | 20x20 | N/A | 28 | 85 | 20 | 45 | ||
[1] May have suffix M followed by number 1 - 99. [2] May have suffix "-70". |
Ecolab, Inc. | |
Ecolab Global HQ | |
1 Ecolab Place | |
St. Paul, MN 55102-1390 | |
United States | |
651-293-2524 |
Facility : L-1 USA
CONVEYOR DISHWASHING MACHINES
Final Rinse | ||||||||
(20 psi) | Conveyor Speed | |||||||
Model | Conveyor | Flow | Usage | (Max.) | Footnotes | |||
Number | Width | gpm | gph | (ft/min.) | ||||
Single Tank Rack Conveyor Dishwasher – (Dual Sanitizing Mode Machine) |
||||||||
EC44 | 20" | 3.7 | 223 | 6.8 | ||||
EC44-LW | 20" | 2.5 | 151 | 6.8 | ||||
EC44-LWB | 20" | 2.5 | 151 | 6.8 | ||||
EC44HH | 20" | 3.7 | 223 | 6.8 | ||||
EC44HH-LW | 20" | 2.5 | 151 | 6.8 | ||||
EC44HH-LWB | 20" | 2.5 | 151 | 6.8 | ||||
EC66 | 20" | 3.7 | 223 | 6.8 | ||||
EC66-LW | 20" | 2.5 | 151 | 6.8 | ||||
EC66HH | 20" | 3.7 | 223 | 6.8 | ||||
EC66HH-LW | 20" | 2.5 | 151 | 6.8 | ||||
Single Tank Conveyor - Chemical Sanitizing |
||||||||
ET-44 | 20x20 | 4.84 | 250 | 5.7 | [1] [2] | |||
ET-66 | 20x20 | 4.84 | 250 | 5.7 | [1] [2] | |||
[1] Unit accepted only when installed with NSF Standard 29 Certified dispenser. [2] Unit is tested and Certified as a dual sanitizing mode machine. The sanitizing mode is designed to be converted in the field by the manufacturer or its authorized service representative. |
||||||||
Single Tank Rack Conveyor - Chemical Sanitizing[3] |
||||||||
ES-4400CS | 20x20 | 3.9 | 234 | 6.5 | [4] | |||
ES-4400CSS | 20x20 | 3.9 | 234 | 6.5 | [4] | |||
ES-6600CS | 20x20 | 3.9 | 234 | 6.5 | [4] [5] | |||
ES-6600CSS | 20x20 | 3.9 | 234 | 6.5 | [4] [5] | |||
ES-8000CS | 20x20 | 3.9 | 234 | 6.5 | [4] [5] | |||
ES-8000CSS | 20x20 | 3.9 | 234 | 6.5 | [4] [5] | |||
PA-C4-CS | 20x20 | 3.9 | 233 | 6 | [4] | |||
WH-44CS | 20x20 | 3.89 | 233 | 6 | [4] | |||
WH-44CSS | 20x20 | 3.89 | 233 | 6 | [4] | |||
WH-66CS | 20x20 | 3.89 | 233 | 6 | [4] | |||
WH-66CSS | 20x20 | 3.89 | 233 | 6 | [4] | |||
[3] Units produced after February 15, 2007 may be dual temperature convertible models. [4] Nonrecirculated, fresh water, rinal rinse, 50 ppm available chlorine. [5] With recirculated prewash. Prewash temperature 110° - 140°F is obtained from wash tank overflow and fresh water supply. |
||||||||
Single Tank Rack Conveyor - Hot Water Sanitizing[3] |
||||||||
ES-4400 | 20x20 | 3.9 | 234 | 6.9 | ||||
ES-4400S | 20x20 | 3.9 | 234 | 6.9 | ||||
ES-6600 | 20x20 | 3.9 | 234 | 6.9 | [5] | |||
ES-6600S | 20x20 | 3.9 | 234 | 6.9 | [5] | |||
ES-7600CS | 20x20 | 4.6 | 279 | 7.5 | [5] | |||
ES-8000 | 20x20 | 3.9 | 234 | 6.9 | [5] | |||
ES-8000S | 20x20 | 3.9 | 234 | 6.9 | [5] | |||
PA-C4 | 20x20 | 3.89 | 233 | 6 | ||||
WH-44 | 20x20 | 3.89 | 233 | 6 | ||||
WH-66 | 20x20 | 2.89 | 233 | 6 | [5] | |||
[3] Units produced after February 15, 2007 may be dual temperature convertible models. [5] With recirculated prewash. Prewash temperature 110° - 140°F is obtained from wash tank overflow and fresh water supply. |
GLASSWASHING MACHINES
Glasswasher |
|
DF | |
SW-400L | |
SW-400R | |
SW-600L | |
SW-600R |
STATIONARY RACK DISHWASHING MACHINES
Final Rinse | ||||||||
(20 psi) | Operating Time | |||||||
Model | Rack Size | Flow | Usage | (seconds) | Footnotes | |||
Number | Width | gpm | gph | Wash | Rinse | Dwell | ||
Single Tank Door (Dual Sanitizing Mode Machines) |
||||||||
Apex HT | 20x20 | N/A | 45.6 | 45 | 10 | 1.9 | ||
E-HT | 20x20 | 4 | 25.7 | 45 | 7 | 8 | ||
E-HT-V | 20x20 | 4 | 21.5 | 45 | 7 | 20 | ||
XL-HT | 20x20 | N/A | 45.6 | 45 | 10 | 1.9 | ||
XL-HT VV | 20x20 | N/A | 45.6 | 45 | 10 | 1.9 | ||
Single Tank Door - Chemical Sanitizing |
||||||||
Apex TSC | 20x20 | N/A | 40.8 | 42 | 25 | 18 | ||
Apex TSC | 20x20 | N/A | 55.7 | 42 | 15 | 15 | ||
Apex TSC Double | 2(20x20) | 11.9 | 91.26 | 53 | 14 | 20 | [1] | |
Apex TSC-V | 20x20 | N/A | 55.7 | 42 | 15 | 15 | ||
ES-1000HN | 20x20 | 6.6 | 28.8 | 56 | 35 | 26 | [2] [3] | |
ES-1000N | 20x20 | 6.6 | 28.8 | 56 | 35 | 26 | [2] [3] | |
ES-1000N/B | 20x20 | 6.6 | 28.8 | 56 | 35 | 26 | [2] [3] | |
ES-2000HH | 20x20 | N/A | 90.4 | 44 | 25 | 16 | [4] [5] [6] | |
ES-4000 | 2(20x20) | N/A | 144 | 35 | 20 | 16 | [1] [7] [8] [9] [10] | |
ES-4000 | 2(20x20) | N/A | 120 | 40 | 25 | 20 | [1] [7] [8] [9] [10] | |
ES-4000 | 2(20x20) | N/A | 88.92 | 41.94 | 25.8 | 18.07 | [1] [6] [7] [8] [9] [10] | |
ES-4000 | 2(20x20) | 11.9 | 91.26 | 53 | 14 | 20 | [1] [7] [8] [9] [10] | |
KAY QSR TSC | 20x20 | N/A | 55.7 | 42 | 15 | 15 | ||
KAY QSR TSC | 20x20 | N/A | 40.8 | 42 | 25 | 18 | ||
KAY QSR TSC-V | 20x20 | N/A | 55.7 | 42 | 15 | 15 | ||
Omega | 20x20 | N/A | 48 | 43 | 25 | 20 | [4] [11] | |
Omega 5 | 20x20 | N/A | 36 | 46 | 25 | 21 | ||
Omega 5E | 20x20 | N/A | 36 | 46 | 25 | 21 | [6] | |
Omega 5E | 20x20 | N/A | 36 | 43 | 24 | 18 | [6] | |
Omega 5E-P | 20x20 | N/A | 36 | 46 | 25 | 21 | ||
Omega 5E-P | 20x20 | N/A | 36 | 43 | 24 | 18 | ||
Omega 5ED | 20x20 | N/A | 36 | 46 | 25 | 21 | ||
PA-2 | 2(20x20) | N/A | 144 | 35 | 20 | 16 | [1] [7] [8] [10] [11] | |
PA-2 | 2(20x20) | N/A | 144 | 35 | 20 | 16 | [1] [7] [8] [11] [13] | |
PA-2 | 2(20x20) | 11.9 | 91.26 | 53 | 14 | 20 | [1] [7] [8] [10] [11] | |
PA-U | 20x20 | 6.6 | 28.8 | 56 | 35 | 26 | [2] [13] | |
PA-UN | 20x20 | 6.6 | 28.8 | 56 | 35 | 26 | [2] [3] | |
PA-UNB | 20x20 | 6.6 | 28.8 | 56 | 35 | 26 | [2] [3] | |
Typhoon | 20x20 | N/A | 55.7 | 42 | 15 | 15 | [4] | |
XL-RW | 20x20 | N/A | 45.6 | 45 | 10 | 1.9 | ||
XL-RW VV | 20x20 | N/A | 45.6 | 45 | 10 | 1.9 | ||
[1] Suffix "CDR" or "CDL" may appear. "CDR" indicates a right corner door option. "CDL" indicates a left corner door option. [2] Dwell includes drain and fill cycles. [3] Model will always be supplied with sanitizer pump, however detergent and rinse aid feeders are optional. [4] Model may be equipped with vapor vent steam removal system. [5] Wash temperature 130°F. [6] Unit is NSF Certified for use with Peroxyoctanoic Acid at 8 ppm. [7] Accepted only with Jackson chemical feeders, peristaltic pump or pinch valve. [8] Single tank machine utilizing two racks per complete operating cycle. [9] Tested for reduced water usage in June, 1995; previous rinse usage was 192 gph. [10] Pumped rinse, minimum 50 ppm available chlorine, minimum 120° F. [11] Model designation may be followed by suffix "XSP" indicating that unit is equipped with XSP dispensing system for dispensing of solid detergent and rinse additive. [13] Dwell includes drain, flush and fill cycles. |
||||||||
Single Tank Door - Chemical Sanitizing Undercounter Dishmachine |
||||||||
501LT | 20x20 | 4 | 36.6 | 90 | 25 | 27 | [6] | |
U-LT-1 | 20x20 | N/A | 32 | 90 | 25 | 27 | [6] | |
[6] Unit is NSF Certified for use with Peroxyoctanoic Acid at 8 ppm. |
||||||||
Single Tank Door - Hot Water Sanitizing |
||||||||
ES-2000HT | 20x20 | N/A | 69 | 41 | 11 | 8 | [14] | |
Inferno | 20x20 | N/A | 69 | 41 | 11 | 8 | [14] | |
JP-24 | 20x20 | 6.6 | 26.4 | 82 | 10 | 28 | [15] [16] [17] | |
JPX-300H | 20x20 | 6.6 | 26.4 | 82 | 10 | 28 | [17] [18] [19] | |
Omega HT | 20x20 | N/A | 69 | 41 | 11 | 8 | [14] | |
PA-HT | 20x20 | 5.46 | 72 | 45 | 15 | 2 | [4] [20] | |
TS-57 | 20x20 | 5.46 | 57 | 45 | 11 | 2 | [24] | |
TempStar | 20x20 | 5.46 | 57 | 45 | 11 | 2 | [21] | |
TempStar HH | 20x20 | 5.46 | 72 | 45 | 15 | 2 | [20] [22] [23] | |
[4] Model may be equipped with vapor vent steam removal system. [14] Model designation may have suffix "V" denoting vapor vent steam removal system. [15] Non-steam-heated models without integral booster require 180°F minimum fresh water hook-up. [16] Model designation may have suffix of (1) "F" denoting free standing machine with top and side panels standard, (2) "B" denoting that the unit is supplied with a built-in booster for a minimum 40°F rinse temperature rise or (3) "BF" denoting the unit is equipped as in both suffixes "F" and "B" combined. [17] Extended Wash Cycle Option (262 seconds) available. [18] Unit is supplied with integral booster for minimum 40°F rinse temperature rise. [19] Model may have detergent or rinse aid chemical feeder pump or both. [20] Non-recirculated fresh water final rinse. [21] Non-recirculated fresh water final rinse. [22] Unit equipped with a multiple setting time delay feature to extend wash times. Maximum wash time delays are 5 minutes. [23] Model designation may have a suffix or (1) "/NB" to indicate that the unit does not come with an integral booster and must be supplied with a minimum 180°F fresh water hook-up or (2) "GP" or "GPX" to indicate gas-heated model. Gas-heated machines have a single-source gas booster which maintains the appropriate wash tank temperature. Models without a suffix come with an integral booster for a minimum 40°F rinse temperature rise. [24] Model designation may have a suffix of (1) "S" to indicate steam-heated model, (2) "GP" to indicate gas-heated model. Gas-heated machines have a single-source gas booster which also maintains the appropriate wash tank temperature. |
||||||||
Single Tank Door - Hot Water Sanitizing Undercounter Dishmachine |
||||||||
501HT | 20x20 | 4 | 36.6 | 90 | 25 | 27 | ||
U-HT-1 | 20x20 | N/A | 28.2 | 70 | 15 | 5 | ||
COMPONENTS: |
||||||||
Single Tank Chemical Sanitizing Dishmachines |
||||||||
ES-1000 | 20x20 | 6.6 | 28.8 | 56 | 35 | 26 | ||
ES-1000H | 20x20 | 6.6 | 28.8 | 56 | 35 | 26 | ||
ES-2000 | 20x20 | N/A | 57.6 | 40 | 15 | 16 | [4] [10] [12] [13] [14] [25] [26] | |
ES-2000 | 20x20 | N/A | 48 | 40 | 25 | 20 | [4] [6] [10] [12] [13] [14] [25] [26] | |
ES-2000 | 20x20 | N/A | 40.8 | 42 | 25 | 18 | [4] [6] [10] [12] [13] [14] [25] [26] | |
ES-2000CS | 20x20 | N/A | 40.8 | 42 | 25 | 18 | [4] [6] [10] [13] [14] [25] | |
ES-2000CS | 20x20 | N/A | 48 | 40 | 25 | 20 | [4] [6] [10] [13] [14] [26] | |
ES-2000CS | 20x20 | N/A | 57.6 | 40 | 15 | 16 | [4] [10] [13] [14] [25] [26] | |
PA-1 | 20x20 | N/A | 57.6 | 40 | 15 | 16 | [10] [13] [14] | |
PA-1 | 20x20 | N/A | 40.8 | 42 | 25 | 18 | [6] [10] [13] [14] | |
[4] Model may be equipped with vapor vent steam removal system. [6] Unit is NSF Certified for use with Peroxyoctanoic Acid at 8 ppm. [10] Pumped rinse, minimum 50 ppm available chlorine, minimum 120° F. [12] Model designation may have suffix "PH" to indicate liquid chemical feeder. [13] Dwell includes drain, flush and fill cycles. [14] Model designation may have suffix "V" denoting vapor vent steam removal system. [25] Units are equipped with XSP dispensing system for dispensing of solid detergent and rinse additive. [26] Tested for reduced water usage in June 1995; previous rinse usage was 192 gph. |
Facility : L-4 USA
CONVEYOR DISHWASHING MACHINES
Final Rinse | ||||||||
(20 psi) | Conveyor Speed | |||||||
Model | Conveyor | Flow | Usage | (Max.) | Footnotes | |||
Number | Width | gpm | gph | (ft/min.) | ||||
Single Tank Rack Conveyor - Hot Water Sanitizing |
||||||||
ES-4400 | 20x20 | 3.9 | 234 | 6.9 | [1] [2] | |||
ES-6600 | 20x20 | 3.9 | 234 | 6.9 | [1] [2] [3] | |||
ES-8000 | 20x20 | 3.9 | 234 | 6.9 | [1] [2] [3] | |||
[1] Model number may contain suffix "S" indicating steam heated. [2] Units produced after February 15, 2007 may be dual temperature convertible models. [3] With recirculated prewash. Prewash temperature 110° - 140°F is obtained from wash tank overflow and fresh water supply. |
||||||||
Single Tank Rack Conveyor Dishwasher – (Dual Sanitizing Mode Machine) |
||||||||
EC44-LW | 20" | 2.5 | 151 | 6.8 | ||||
EC44-LWB | 20" | 2.5 | 151 | 6.8 | ||||
EC44HH-LWB | 20" | 2.5 | 151 | 6.8 | ||||
EC44 | 20" | 3.7 | 223 | 6.8 | ||||
EC44HH | 20" | 3.7 | 223 | 6.8 | ||||
EC44HH-LW | 20" | 2.5 | 151 | 6.8 | ||||
EC66 | 20" | 3.7 | 223 | 6.8 | ||||
EC66-LW | 20" | 2.5 | 151 | 6.8 | ||||
EC66HH | 20" | 3.7 | 223 | 6.8 | ||||
EC66HH-LW | 20" | 2.5 | 151 | 6.8 | ||||
COMPONENTS: |
||||||||
Single Tank Rack Conveyor - Chemical Sanitizing |
||||||||
ES-4400 | 20x20 | 3.9 | 234 | 6.5 | [2] [4] [5] | |||
ES-6600 | 20x20 | 3.9 | 234 | 6.5 | [2] [3] [4] [5] | |||
ES-8000 | 20x20 | 3.9 | 234 | 6.5 | [2] [3] [4] [5] | |||
WH-66 | 20x20 | 3.89 | 233 | 6 | [2] [3] [4] [5] | |||
WH-44 | 20x20 | 3.89 | 233 | 6 | [4] [5] | |||
WH-44CS | 20x20 | 3.89 | 233 | 6 | [2] [4] | |||
PA-C4-CS | 20x20 | 3.9 | 233 | 6 | [2] [4] | |||
[2] Units produced after February 15, 2007 may be dual temperature convertible models. [3] With recirculated prewash. Prewash temperature 110° - 140°F is obtained from wash tank overflow and fresh water supply. [4] Nonrecirculated, fresh water, final rinse, 50 ppm available chlorine. [5] Model designation to be followed with suffix either of (1) "CS" for electrically heated or (2) "CSS" for steam heated. |
GLASSWASHING MACHINES
COMPONENTS: |
|
Vapor Vent Steam Removal System |
|
STATIONARY RACK DISHWASHING MACHINES
Final Rinse | ||||||||
(20 psi) | Operating Time | |||||||
Model | Rack Size | Flow | Usage | (seconds) | Footnotes | |||
Number | Width | gpm | gph | Wash | Rinse | Dwell | ||
Single Tank Door (Dual Sanitizing Mode Machines) |
||||||||
Apex HT | 20x20 | N/A | 45.6 | 45 | 10 | 1.9 | ||
E-HT | 20x20 | 4 | 25.7 | 45 | 7 | 8 | ||
E-HT-V | 20x20 | 4 | 21.5 | 45 | 7 | 20 | ||
XL-HT | 20x20 | N/A | 45.6 | 45 | 10 | 1.9 | ||
XL-HT VV | 20x20 | N/A | 45.6 | 45 | 10 | 1.9 | ||
Single Tank Door - Chemical Sanitizing |
||||||||
Apex TSC | 20x20 | N/A | 55.7 | 42 | 15 | 15 | ||
Apex TSC | 20x20 | N/A | 40.8 | 42 | 25 | 18 | ||
Apex TSC Double | 2(20x20) | 11.9 | 91.26 | 53 | 14 | 20 | [1] | |
Apex TSC-V | 20x20 | N/A | 55.7 | 42 | 15 | 15 | ||
ES-1000HN | 20x20 | 6.6 | 28.8 | 56 | 35 | 26 | [2] [3] | |
ES-1000N | 20x20 | 6.6 | 28.8 | 56 | 35 | 26 | [2] [3] | |
ES-1000N/B | 20x20 | 6.6 | 28.8 | 56 | 35 | 26 | [2] [3] | |
ES-2000 | 20x20 | N/A | 48 | 40 | 25 | 20 | [4] [5] [6] [7] [8] [9] [17] | |
ES-2000 | 20x20 | N/A | 40.8 | 42 | 25 | 18 | [4] [5] [6] [7] [8] [9] [17] | |
ES-2000 | 20x20 | N/A | 57.6 | 40 | 15 | 16 | [4] [5] [6] [7] [8] [9] | |
ES-2000-CS | 20x20 | N/A | 57.6 | 40 | 15 | 16 | [4] [5] [6] [7] [8] | |
ES-2000-CS | 20x20 | N/A | 40.8 | 42 | 25 | 18 | [4] [5] [7] [8] | |
ES-2000-CS | 20x20 | N/A | 48 | 40 | 25 | 20 | [4] [5] [6] [7] [8] | |
ES-2000HH | 20x20 | N/A | 90.4 | 44 | 25 | 16 | [8] [10] [17] | |
ES-4000 | 2(20x20) | 11.9 | 91.26 | 53 | 14 | 20 | [1] [5] [6] [11] [12] | |
ES-4000 | 2(20x20) | N/A | 144 | 35 | 20 | 16 | [1] [5] [6] [11] [12] | |
ES-4000 | 2(20x20) | N/A | 88.92 | 41.94 | 25.8 | 18.07 | [1] [5] [6] [11] [12] | |
ES-4000 | 2(20x20) | N/A | 120 | 40 | 25 | 20 | [1] [5] [6] [11] [12] [17] | |
KAY QSR TSC | 20x20 | N/A | 40.8 | 42 | 25 | 18 | ||
KAY QSR TSC | 20x20 | N/A | 55.7 | 42 | 15 | 15 | ||
KAY QSR TSC-V | 20x20 | N/A | 55.7 | 42 | 15 | 15 | ||
Omega | 20x20 | N/A | 48 | 43 | 25 | 20 | [7] [8] | |
Omega 5 | 20x20 | N/A | 36 | 46 | 25 | 21 | ||
Omega 5E | 20x20 | 6.8 | 36 | 43 | 24 | 18 | [17] | |
Omega 5E | 20x20 | 6.8 | 36 | 46 | 25 | 21 | [17] | |
Omega 5E-P | 20x20 | N/A | 36 | 43 | 24 | 18 | ||
Omega 5E-P | 20x20 | N/A | 36 | 46 | 25 | 21 | ||
Omega 5ED | 20x20 | N/A | 36 | 46 | 25 | 21 | ||
Omega CS | 20x20 | N/A | 55.7 | 42 | 15 | 15 | [8] | |
PA-1 | 20x20 | N/A | 40.8 | 42 | 25 | 18 | [4] [5] [7] [8] | |
PA-1 | 20x20 | N/A | 57.6 | 40 | 15 | 16 | [4] [5] [7] [8] | |
PA-1CS | 20x20 | N/A | 57.6 | 40 | 15 | 16 | [4] [5] [6] [7] [8] | |
PA-1CS | 20x20 | N/A | 48 | 40 | 25 | 20 | [4] [5] [6] [7] [8] | |
PA-1CS | 20x20 | N/A | 40.8 | 42 | 25 | 18 | [4] [5] [7] [8] | |
PA-2 | 2(20x20) | N/A | 144 | 35 | 20 | 16 | [1] [5] [7] [11] [12] | |
PA-2 | 2(20x20) | 11.9 | 91.26 | 53 | 14 | 20 | [4] [5] [7] [12] [13] | |
PA-U | 20x20 | 6.6 | 28.8 | 56 | 35 | 26 | [2] [5] | |
PA-UN | 20x20 | 6.6 | 28.8 | 56 | 35 | 26 | [2] [3] | |
PA-UNB | 20x20 | 6.6 | 28.8 | 56 | 35 | 26 | [2] [3] | |
Typhoon | 20x20 | N/A | 55.7 | 42 | 15 | 15 | [8] | |
Typhoon TSC | 20x20 | N/A | 55.7 | 42 | 15 | 15 | ||
Typhoon TSC-V | 20x20 | N/A | 55.7 | 42 | 15 | 15 | ||
XL-RW | 20x20 | N/A | 45.6 | 45 | 10 | 1.9 | ||
XL-RW VV | 20x20 | N/A | 45.6 | 45 | 10 | 1.9 | ||
[1] Suffix "CDR" or "CDL" may appear. "CDR" indicates a right corner door option. "CDL" indicates a left corner door option. [2] Dwell includes drain and fill cycles. [3] Model will always be supplied with sanitizer pump, however detergent and rinse aid feeders are optional. [4] Dwell includes drain, flush and fill cycles. [5] Pumped rinse, minimum 50 ppm available chlorine, minimum 120°F. [6] Tested for reduced water usage in June, 1995; previous rinse usage was 192 gph. [7] Model designation may be followed by suffix "XSP" indicating that unit is equipped with XSP dispensing system for dispensing of solid detergent and rinse additive. [8] Model may be equipped with vapor vent steam removal system, which may be indicated by a suffix "V". [9] Model designation may have suffix "PH" to indicate liquid chemical feeder. [10] Wash temperature 130°F. [11] Accepted only with Jackson chemical feeders, peristaltic pump or pinch valve. [12] Single tank machine utilizing two racks per complete operating cycle. [13] Unit is supplied with integral booster for minimum 40°F rinse temperature rise. [17] Unit is NSF Certified for use with Peroxyoctanoic Acid at 8 ppm. |
||||||||
Single Tank Door - Hot Water Sanitizing |
||||||||
E-XXION | 20x20 | 5.46 | 57 | 45 | 11 | 2 | [14] | |
ES-2000HT | 20x20 | N/A | 69 | 41 | 11 | 8 | [8] | |
Inferno | 20x20 | N/A | 69 | 41 | 11 | 8 | [8] | |
Omega HT | 20x20 | N/A | 69 | 41 | 11 | 8 | [8] | |
PA-HT | 20x20 | 5.46 | 72 | 45 | 15 | 2 | [8] [15] | |
TS-57 | 20x20 | 5.46 | 57 | 45 | 11 | 2 | [16] | |
[8] Model may be equipped with vapor vent steam removal system, which may be indicated by a suffix "V". [14] Model designation may have suffix "E" to indicate electrically heated, "G" to indicate gas heated, or "S" to indicate steam heated. [15] Non-recirculated fresh water final rinse. [16] Model designation may have a suffix of (1) "S" to indicate steam-heated model, (2) "GP" to indicate gas-heated model. Gas-heated machines have a single-source gas booster which also maintains the appropriate wash tank temperature. |
||||||||
COMPONENTS: |
||||||||
Single Tank Chemical Sanitizing |
||||||||
ES-1000 | 20x20 | 6.6 | 28.8 | 56 | 35 | 26 | ||
ES-1000H | 20x20 | 6.6 | 28.8 | 56 | 35 | 26 |
Facility : L-3 Canada
CONVEYOR DISHWASHING MACHINES
Final Rinse | ||||||||
(20 psi) | Conveyor Speed | |||||||
Model | Conveyor | Flow | Usage | (Max.) | Footnotes | |||
Number | Width | gpm | gph | (ft/min.) | ||||
Single Tank Rack Conveyor Dishwasher – (Dual Sanitizing Mode Machine) |
||||||||
EC44 | 20" | 3.7 | 223 | 6.8 | ||||
EC44-LW | 20" | 2.5 | 151 | 6.8 | ||||
EC44-LWB | 20" | 2.5 | 151 | 6.8 | ||||
EC44HH | 20" | 3.7 | 223 | 6.8 | ||||
EC44HH-LW | 20" | 2.5 | 151 | 6.8 | ||||
EC44HH-LWB | 20" | 2.5 | 151 | 6.8 | ||||
EC66 | 20" | 3.7 | 223 | 6.8 | ||||
EC66-LW | 20" | 2.5 | 151 | 6.8 | ||||
EC66HH | 20" | 3.7 | 223 | 6.8 | ||||
EC66HH-LW | 20" | 2.5 | 151 | 6.8 |
STATIONARY RACK DISHWASHING MACHINES
Final Rinse | ||||||||
(20 psi) | Operating Time | |||||||
Model | Rack Size | Flow | Usage | (seconds) | Footnotes | |||
Number | Width | gpm | gph | Wash | Rinse | Dwell | ||
Single Tank Door - Chemical Sanitizing |
||||||||
Omega 5E | 20x20 | N/A | 36 | 43 | 24 | 18 | [1] | |
Omega 5E | 20x20 | N/A | 36 | 46 | 25 | 21 | [1] | |
Omega 5E-P | 20x20 | N/A | 36 | 46 | 25 | 21 | ||
Omega 5E-P | 20x20 | N/A | 36 | 43 | 24 | 18 | ||
Omega 5ED | 20x20 | N/A | 36 | 46 | 25 | 21 | ||
[1] Unit is NSF Certified for use with Peroxyoctanoic Acid at 8 ppm. |
Ecolab, Inc. | |
Ecolab Center | |
370 Wabasha Street North | |
St. Paul, MN 55102-1390 | |
United States | |
651-293-2524 |
Facility : Jordan Station, Ontario, Canada
STATIONARY RACK DISHWASHING MACHINES
Final Rinse | ||||||||
(20 psi) | Operating Time | |||||||
Model | Rack Size | Flow | Usage | (seconds) | Footnotes | |||
Number | Width | gpm | gph | Wash | Rinse | Dwell | ||
Single Tank, Chemical Sanitizing Undercounter Dishwasher |
||||||||
U-LT-1 | 20x20 | N/A | 32 | 90 | 25 | 27 | ||
Single Tank, Hot Water, Undercounter Dishwasher[1] |
||||||||
U-HT-1 | 20x20 | N/A | 24 | 70 | 14 | 6 | ||
[1] May have suffix "-70". |
Elviomex SA | |
Thesi Kamini, Inofita Viotia | |
PC 32011 | |
Greece | |
30 22620 56380 | |
Visit this company's website |
Facility : # 1 Greece in Inofita Viotias
STATIONARY RACK DISHWASHING MACHINES
Final Rinse | ||||||||
(20 psi) | Operating Time | |||||||
Model | Rack Size | Flow | Usage | (seconds) | Footnotes | |||
Number | Width | gpm | gph | Wash | Rinse | Dwell | ||
Single Tank Door, Hot Water Sanitizing |
||||||||
ALFA 1510 | 50x50 | 1.8 | 13.2 | 103 | 16 | 1 | ||
ALFA C 1500 | 50x50 | 1.8 | 13.2 | 103 | 16 | 1 | ||
AMPTO 1510 | 50x50 | 1.8 | 13.2 | 103 | 16 | 1 | ||
CD-GR-1500 | 50x50 | 1.8 | 13.2 | 103 | 16 | 1 | ||
CD-GR-1510 | 50x50 | 1.8 | 13.2 | 103 | 16 | 1 | ||
Single Tank Undercounter, Hot Water Sanitizing |
||||||||
ALFA 500 | 50x50 | 1.7 | 11 | 105 | 16 | 1 | ||
ALFA V 500 | 50x50 | 1.7 | 11 | 105 | 16 | 1 | ||
AMPTO 500 | 50x50 | 1.7 | 11 | 105 | 16 | 1 | ||
CD-GR-0500 | 50x50 | 1.7 | 11 | 105 | 16 | 1 | ||
CD-GR-500 | 50x50 | 1.7 | 11 | 105 | 16 | 1 |
Hobart Corporation | |
World Headquarters | |
701 South Ridge Avenue | |
Troy, OH 45374 | |
United States | |
937-332-3000 | |
Visit this company's website |
Facility : # 5 Italy
STATIONARY RACK DISHWASHING MACHINES
Final Rinse | ||||||||
(20 psi) | Operating Time | |||||||
Model | Rack Size | Flow | Usage | (seconds) | Footnotes | |||
Number | Width | gpm | gph | Wash | Rinse | Dwell | ||
Undercounter, Chemical Sanitizing, Centerline Series, Ecoline Series |
||||||||
CUL | 20x20 | N/A | 20.1 | 90 | 15 | 15 | [1] [2] | |
EUL | 20x20 | N/A | 22.1 | 90 | 16 | 15 | [1] [2] | |
EUL | 20x20 | N/A | 22.1 | 90 | 15 | 15 | [1] [2] | |
[1] Final rinse must contain 50 ppm minimum available chlorine. [2] Pumped final rinse, no pressure gauge required. |
||||||||
Undercounter, Hot Water Sanitizing, Centerline Series, Ecoline Series |
||||||||
CUH | 20x20 | N/A | 20.3 | 90 | 15 | 15 | [2] | |
EUH | 20x20 | N/A | 20.3 | 90 | 15 | 15 | [2] | |
EUH | 20x20 | N/A | 21.9 | 90 | 15 | 15 | [2] | |
[2] Pumped final rinse, no pressure gauge required. |
Facility : # 6 Italy
STATIONARY RACK DISHWASHING MACHINES
Final Rinse | ||||||||
(20 psi) | Operating Time | |||||||
Model | Rack Size | Flow | Usage | (seconds) | Footnotes | |||
Number | Width | gpm | gph | Wash | Rinse | Dwell | ||
Centerline Series, Ecoline Series - Chemical Sanitizing Rack |
||||||||
CDL | 20x20 | N/A | 43.9 | 35 | 15 | 15 | [1] | |
EDL | 20x20 | N/A | 38.7 | 48 | 17 | 15 | [1] | |
[1] Final rinse must contain 50 ppm minimum available chlorine. |
||||||||
Centerline Series, Ecoline Series - Hot Water Sanitizing Rack |
||||||||
CDH | 20x20 | N/A | 37.4 | 30 | 16 | 19 | [2] | |
EDH | 20x20 | N/A | 47.7 | 30 | 18 | 17 | [2] | |
EDH | 20x20 | N/A | 43.4 | 30 | 17 | 18 | [2] | |
[2] Pumped final rinse, no pressure gauge required. |
Facility : Danville, KY
STATIONARY RACK DISHWASHING MACHINES
Final Rinse | ||||||||
(20 psi) | Operating Time | |||||||
Model | Rack Size | Flow | Usage | (seconds) | Footnotes | |||
Number | Width | gpm | gph | Wash | Rinse | Dwell | ||
Single Tank Chemical Sanitizing Door (Dual Sanitizing Mode Machines) |
||||||||
AM15 | 20x20 | 4.4 | 47.4 | 38 | 10 | 2 | [1] [2] [3] [4] [5] [6] | |
AM15F | 20x20 | 4.4 | 33 | 38 | 10 | 2 | [1] [2] [4] [5] [6] | |
AM15T | 20x20 | 4.4 | 47.4 | 38 | 10 | 2 | [1] [2] [3] [4] [5] [6] [7] | |
[1] Optional tabling and shelving fully complying with NSF Standard 2 may be provided. [2] Final rinse must contain 50 ppm minimum available chlorine. [3] Corner model is rated 40.8 gph for hot and 46 gph for chemical sanitizing. [4] Includes post-wash dwell (2 seconds). [5] This unit has been tested and Certified as a combination Dishwashing/Pot, Pan & Utensil Washing Machine. Please reference this model's Listing under Stationary Rack Pot, Pan and Utensil Washing Machines for this model's specifications for that mode of operation. [6] Available with power vent fan option. [7] Available with optional front loading kit rated with 33 gph for chemical sanitizing and 30 gph hot water sanitizing. |
||||||||
Single Tank Door (Dual Sanitizing Mode Machines) |
||||||||
AM15 | 20x20 | 4.4 | 42.3 | 38 | 10 | 9 | [1] [3] [5] [8] | |
AM15F | 20x20 | 4.4 | 30 | 38 | 10 | 9 | [1] [5] [8] | |
AM15T | 20x20 | 4.4 | 42.3 | 38 | 10 | 9 | [1] [3] [5] [7] [8] | |
[1] Optional tabling and shelving fully complying with NSF Standard 2 may be provided. [3] Corner model is rated 40.8 gph for hot and 46 gph for chemical sanitizing. [5] This unit has been tested and Certified as a combination Dishwashing/Pot, Pan & Utensil Washing Machine. Please reference this model's Listing under Stationary Rack Pot, Pan and Utensil Washing Machines for this model's specifications for that mode of operation. [7] Available with optional front loading kit rated with 33 gph for chemical sanitizing and 30 gph hot water sanitizing. [8] Includes post-wash dwell (2 seconds) and post-rinse dwell (7 seconds). |
||||||||
Single Tank Door, Chemical Sanitizing, Fresh Water Rinse |
||||||||
AM15SCB | 20x20 | 4.4 | 47.4 | 38 | 10 | 2 | [1] [2] [3] [4] [5] [7] [9] | |
AM15SCB | 20x20 | 4.4 | 38.7 | 38 | 10 | 14 | [1] [2] [4] [5] [9] [10] [11] [12] | |
[1] Optional tabling and shelving fully complying with NSF Standard 2 may be provided. [2] Final rinse must contain 50 ppm minimum available chlorine. [3] Corner model is rated 40.8 gph for hot and 46 gph for chemical sanitizing. [4] Includes post-wash dwell (2 seconds). [5] This unit has been tested and Certified as a combination Dishwashing/Pot, Pan & Utensil Washing Machine. Please reference this model's Listing under Stationary Rack Pot, Pan and Utensil Washing Machines for this model's specifications for that mode of operation. [7] Available with optional front loading kit rated with 33 gph for chemical sanitizing and 30 gph hot water sanitizing. [9] May be provided with increased rinse times for reduced pressure as follows: 13 sec at 15 PSI, 14 sec at 12 PSI, 15 sec at 10 PSI. [10] May be provided with optional self-contained condensing system. [11] Corner model is rated 37.9 GPH. [12] Available with optional front loading kit rated 28.4 GPH. |
||||||||
Single Tank Door, Chemical Sanitizing, Fresh Water Rinse, Two Temperature |
||||||||
LXGePR | 20x20 | N/A | 33.1 | 56 | 15 | 23 | [2] [23] | |
LXGePR | 20x20 | N/A | 21.1 | 56 | 8 | 9 | [2] [23] | |
LXGnPR | 20x20 | N/A | 21.1 | 56 | 8 | 9 | [2] [23] | |
LXGnPR | 20x20 | N/A | 33.1 | 56 | 15 | 23 | [2] [23] | |
LXeC | 20x20 | N/A | 19.2 | 85 | 10 | 10 | [2] [23] | |
LXePR | 20x20 | N/A | 33.1 | 56 | 15 | 23 | [2] [23] | |
LXePR | 20x20 | N/A | 26.2 | 85 | 15 | 24 | [2] [23] | |
LXePR | 20x20 | N/A | 16.7 | 85 | 8 | 9 | [2] [23] | |
LXePR | 20x20 | N/A | 21.1 | 56 | 8 | 9 | [2] [23] | |
LXeSPR | 20x20 | N/A | 16.7 | 85 | 8 | 9 | [2] [23] | |
LXeSPR | 20x20 | N/A | 21.1 | 56 | 8 | 9 | [2] [23] | |
LXeSPR | 20x20 | N/A | 26.2 | 85 | 15 | 24 | [2] [23] | |
LXeSPR | 20x20 | N/A | 33.1 | 56 | 15 | 23 | [2] [23] | |
LXnC | 20x20 | N/A | 16.7 | 85 | 8 | 10 | [2] [23] | |
[2] Final rinse must contain 50 ppm minimum available chlorine. [23] Pumped final rinse, no pressure gauge required. |
||||||||
Single Tank Door, Chemical Sanitizing, Pumped Fresh Water Rinse |
||||||||
AM16SCB | 20x20 | N/A | 47.9 | 30 | 10 | 5 | [2] [5] [13] | |
AM16SCBX | 20x20 | N/A | 16.9 | 120 | 10 | 5 | [5] [14] | |
AM16TSCB | 20x20 | N/A | 42.8 | 30 | 10 | 5 | [2] [5] | |
AM16VLSCB | 20x20 | N/A | 39.2 | 30 | 10 | 17 | [2] [5] [13] [15] | |
AM16VLSCBX | 20x20 | N/A | 15.5 | 120 | 10 | 17 | [5] [14] [16] | |
AM16VLTSCB | 20x20 | N/A | 34.9 | 30 | 10 | 17 | [2] [5] [21] | |
[2] Final rinse must contain 50 ppm minimum available chlorine. [5] This unit has been tested and Certified as a combination Dishwashing/Pot, Pan & Utensil Washing Machine. Please reference this model's Listing under Stationary Rack Pot, Pan and Utensil Washing Machines for this model's specifications for that mode of operation. [13] Corner models rated 46.6 GPH for AM16SCB/AM16SCBX, 29 GPH for AM16VLSCB/AM16VLSCBX, 40.4 GPH for AM16TSCB, and 33.7 GPH for AM16VLTSCB. [14] Includes condensing period (20 seconds). [15] Includes condensing period (12 seconds). [16] Corner models rated 39.2 GPH for AM16BAS/AM16BASX, AM16TBAS/AM16TBASX, 34.4 GPH for AM16ASR, AM16TASR, 29 GPH for AM16VLBAS/AM16VLBASX, 26.3 GPH for AM16VLTBAS/AM16VLTBASX, 27 GPH for AM16VLADV and AM16SVL, 24.3 for AM16VLTADV and AM16SVLT. [21] Includes condensing period (30 seconds). |
||||||||
Single Tank Door, Hot Water Sanitizing, (Pumped Rinse) |
||||||||
AM15SVL | 20x20 | N/A | 22.2 | 58 | 10 | 47 | [1] [5] [17] [18] [19] | |
AM15SVLT | 20x20 | N/A | 22.2 | 58 | 10 | 47 | [1] [5] [7] [17] [18] [19] | |
AM15VL | 20x20 | 4.4 | 28.6 | 38 | 10 | 39 | [1] [5] [17] [18] [20] | |
AM15VLF | 20x20 | 4.4 | 22 | 38 | 10 | 39 | [1] [5] [18] [20] | |
AM15VLT | 20x20 | 4.4 | 28.6 | 38 | 10 | 39 | [1] [5] [7] [17] [18] [20] | |
[1] Optional tabling and shelving fully complying with NSF Standard 2 may be provided. [5] This unit has been tested and Certified as a combination Dishwashing/Pot, Pan & Utensil Washing Machine. Please reference this model's Listing under Stationary Rack Pot, Pan and Utensil Washing Machines for this model's specifications for that mode of operation. [7] Available with optional front loading kit rated with 33 gph for chemical sanitizing and 30 gph hot water sanitizing. [17] Corner model is rated 27.8 gph. [18] Final rinse water is supplied through separate cold water line. [19] Note – water consumption is from building cold water supply. [20] Includes wash dwell (2 seconds), post-rinse dwell (7 seconds) and condensing period (30 seconds). |
||||||||
Single Tank Door, Hot Water Sanitizing, Pumped Fresh Water Rinse |
||||||||
AM16ASR | 20x20 | N/A | 35.1 | 30 | 10 | 23 | [5] [16] | |
AM16BAS | 20x20 | N/A | 39.8 | 30 | 10 | 15 | [5] [16] | |
AM16BASX | 20x20 | N/A | 40.5 | 30 | 10 | 15 | [5] [12] [13] | |
AM16SVL | 20x20 | N/A | 27 | 30 | 10 | 43 | [5] [14] [16] | |
AM16SVLT | 20x20 | N/A | 24.3 | 30 | 10 | 53 | [5] [16] [21] | |
AM16TASR | 20x20 | N/A | 35.1 | 30 | 10 | 23 | [5] [16] | |
AM16TBAS | 20x20 | N/A | 39.8 | 30 | 10 | 15 | [5] [16] | |
AM16TBASX | 20x20 | N/A | 40.5 | 30 | 10 | 15 | [5] [12] [13] | |
AM16VLADV | 20x20 | N/A | 27 | 30 | 10 | 43 | [5] [14] [16] | |
AM16VLBAS | 20x20 | N/A | 30.4 | 30 | 10 | 35 | [5] [14] [16] | |
AM16VLBASX | 20x20 | N/A | 27 | 30 | 10 | 43 | [4] [5] [10] [13] | |
AM16VLTADV | 20x20 | N/A | 24.3 | 30 | 10 | 53 | [5] [16] [21] | |
AM16VLTBAS | 20x20 | N/A | 27 | 30 | 10 | 45 | [5] [16] [21] | |
AM16VLTBASX | 20x20 | N/A | 24.3 | 30 | 10 | 53 | [5] [11] [12] [13] | |
[4] Includes post-wash dwell (2 seconds). [5] This unit has been tested and Certified as a combination Dishwashing/Pot, Pan & Utensil Washing Machine. Please reference this model's Listing under Stationary Rack Pot, Pan and Utensil Washing Machines for this model's specifications for that mode of operation. [10] May be provided with optional self-contained condensing system. [11] Corner model is rated 37.9 GPH. [12] Available with optional front loading kit rated 28.4 GPH. [13] Corner models rated 46.6 GPH for AM16SCB/AM16SCBX, 29 GPH for AM16VLSCB/AM16VLSCBX, 40.4 GPH for AM16TSCB, and 33.7 GPH for AM16VLTSCB. [14] Includes condensing period (20 seconds). [16] Corner models rated 39.2 GPH for AM16BAS/AM16BASX, AM16TBAS/AM16TBASX, 34.4 GPH for AM16ASR, AM16TASR, 29 GPH for AM16VLBAS/AM16VLBASX, 26.3 GPH for AM16VLTBAS/AM16VLTBASX, 27 GPH for AM16VLADV and AM16SVL, 24.3 for AM16VLTADV and AM16SVLT. [21] Includes condensing period (30 seconds). |
||||||||
Single Tank Door, Pumped Fresh Water Rinse, Two Temperature |
||||||||
LXGeR | 20x20 | N/A | 14.3 | 56 | 8 | 56 | [10] [19] [22] [23] | |
LXGnR | 20x20 | N/A | 14.3 | 56 | 8 | 56 | [10] [19] [22] [23] | |
LXeH | 20x20 | N/A | 18.5 | 85 | 10 | 15 | [23] | |
LXeR | 20x20 | N/A | 14.3 | 56 | 8 | 56 | [5] [10] [19] [22] [23] | |
LXeR | 20x20 | N/A | 12.4 | 85 | 8 | 53 | [5] [10] [19] [22] [23] | |
LXeSR | 20x20 | N/A | 12.4 | 85 | 8 | 53 | [10] [19] [22] [23] | |
LXeSR | 20x20 | N/A | 14.3 | 56 | 8 | 56 | [10] [19] [22] [23] | |
LXnH | 20x20 | N/A | 16.1 | 85 | 8 | 15 | [23] | |
LXnR | 20x20 | N/A | 14.3 | 56 | 8 | 56 | [5] [10] [19] [22] [23] | |
LXnR | 20x20 | N/A | 12.4 | 85 | 8 | 53 | [5] [10] [19] [22] [23] | |
[5] This unit has been tested and Certified as a combination Dishwashing/Pot, Pan & Utensil Washing Machine. Please reference this model's Listing under Stationary Rack Pot, Pan and Utensil Washing Machines for this model's specifications for that mode of operation. [10] May be provided with optional self-contained condensing system. [19] Note – water consumption is from building cold water supply. [22] Includes wash dwell (10 seconds), post-rinse dwell (5 seconds) and condensing period (40 seconds). [23] Pumped final rinse, no pressure gauge required. |
STATIONARY RACK POT, PAN, AND UTENSIL WASHING MACHINES
Final Rinse | ||||||||
(20 psi) | Operating Time | |||||||
Model | Rack Size | Flow | Usage | (seconds) | Footnotes | |||
Number | Width | gpm | gph | Wash | Rinse | Dwell | ||
Single Tank Chemical Sanitizing Door (Dual Sanitizing Mode Machines) |
||||||||
AM15 | 20x20 | 4.4 | 18.9 | 120 | 10 | 2 | [1] [2] [3] [4] [5] [6] | |
AM15F | 20x20 | 4.4 | 16.1 | 120 | 10 | 2 | [1] [3] [4] [5] [6] | |
AM15T | 20x20 | 4.4 | 18.9 | 120 | 10 | 2 | [1] [2] [3] [4] [5] [6] [7] | |
[1] Optional tabling and shelving fully complying with NSF Standard 2 may be provided. [2] Corner model is rated 17.5 gph for hot and 18.2 gph for chemical sanitizing. [3] This unit has been tested and Certified as a combination Dishwashing/Pot, Pan & Utensil Washing Machine. Please reference this model's Listing under Stationary Rack Dishwashing Machines for this model's specifications for that mode of operation. [4] Includes post-wash dwell (2 seconds). [5] Final rinse must contain 50 ppm minimum available chlorine. [6] Available with power vent fan option. [7] Available with optional front loading kit rated with 16.1 gph for chemical sanitizing and 15.4 gph hot water sanitizing. |
||||||||
Single Tank Door (Dual Sanitizing Mode Machines) |
||||||||
AM15 | 20x20 | 4.4 | 18.2 | 120 | 10 | 9 | [1] [2] [3] [6] [8] | |
AM15F | 20x20 | 4.4 | 15.4 | 120 | 10 | 9 | [1] [3] [6] [8] | |
AM15T | 20x20 | 4.4 | 18.2 | 120 | 10 | 9 | [1] [2] [3] [6] [7] [8] | |
[1] Optional tabling and shelving fully complying with NSF Standard 2 may be provided. [2] Corner model is rated 17.5 gph for hot and 18.2 gph for chemical sanitizing. [3] This unit has been tested and Certified as a combination Dishwashing/Pot, Pan & Utensil Washing Machine. Please reference this model's Listing under Stationary Rack Dishwashing Machines for this model's specifications for that mode of operation. [6] Available with power vent fan option. [7] Available with optional front loading kit rated with 16.1 gph for chemical sanitizing and 15.4 gph hot water sanitizing. [8] Includes post-wash dwell (4 seconds) and post-rinse dwell (5 seconds). |
||||||||
Single Tank Door, Chemical Sanitizing, Fresh Water Rinse |
||||||||
AM15SCB | 20x20 | 4.4 | 18.9 | 120 | 10 | 2 | [1] [3] [4] [5] [9] | |
[1] Optional tabling and shelving fully complying with NSF Standard 2 may be provided. [3] This unit has been tested and Certified as a combination Dishwashing/Pot, Pan & Utensil Washing Machine. Please reference this model's Listing under Stationary Rack Dishwashing Machines for this model's specifications for that mode of operation. [4] Includes post-wash dwell (2 seconds). [5] Final rinse must contain 50 ppm minimum available chlorine. [9] May be provided with increased rinse times for reduced pressure as follows: 13 sec at 15 PSI, 14 sec at 12 PSI, 15 sec at 10 PSI. |
||||||||
Single Tank Door, Chemical Sanitizing, Pumped Fresh Water Rinse |
||||||||
AM16SCB | 20x20 | N/A | 16.9 | 120 | 10 | 5 | [3] [5] [10] [14] [16] | |
AM16SCBX | 20x20 | N/A | 16.9 | 120 | 10 | 5 | [3] [5] [10] [14] [16] | |
AM16TSCB | 20x20 | N/A | 42.8 | 120 | 10 | 5 | [3] [5] [14] [16] | |
AM16VLSCB | 20x20 | N/A | 15.5 | 120 | 10 | 17 | [3] [5] [10] [11] [14] [16] | |
AM16VLSCBX | 20x20 | N/A | 15.5 | 120 | 10 | 17 | [5] [10] [11] [14] [16] | |
AM16VLTSCB | 20x20 | N/A | 34.9 | 120 | 10 | 17 | [3] [5] [10] [11] [14] [16] | |
[3] This unit has been tested and Certified as a combination Dishwashing/Pot, Pan & Utensil Washing Machine. Please reference this model's Listing under Stationary Rack Dishwashing Machines for this model's specifications for that mode of operation. [5] Final rinse must contain 50 ppm minimum available chlorine. [10] Corner models rated 16.9 GPH for AM16SCB/AM16SCBX and 13.5 GPH for AM16VLSCB/AM16VLSCBX. [11] Includes condensing period (12 seconds). [14] Pumped final rinse, no pressure gauge required. [16] Unit is able to be set at 240 second and 360 second wash cycles. |
||||||||
Single Tank Door, Hot Water Sanitizing, (Pumped Rinse) |
||||||||
AM15SVL | 20x20 | N/A | 14.6 | 120 | 10 | 45 | [1] [3] [12] [13] [14] | |
AM15SVLT | 20x20 | N/A | 14.6 | 120 | 10 | 45 | [1] [3] [7] [12] [13] [14] | |
AM15VL | 20x20 | 4.4 | 14.6 | 120 | 10 | 39 | [1] [3] [12] [13] [14] [15] | |
AM15VLF | 20x20 | 4.4 | 13.2 | 120 | 10 | 39 | [1] [3] [13] [15] | |
AM15VLT | 20x20 | 4.4 | 14.6 | 120 | 10 | 39 | [1] [3] [7] [12] [13] [14] [15] | |
[1] Optional tabling and shelving fully complying with NSF Standard 2 may be provided. [3] This unit has been tested and Certified as a combination Dishwashing/Pot, Pan & Utensil Washing Machine. Please reference this model's Listing under Stationary Rack Dishwashing Machines for this model's specifications for that mode of operation. [7] Available with optional front loading kit rated with 16.1 gph for chemical sanitizing and 15.4 gph hot water sanitizing. [12] Corner model is rated same as straight thru model at 14.6 gph. [13] Final rinse water is supplied through separate cold water line. [14] Pumped final rinse, no pressure gauge required. [15] Includes Pot-wash dwell (2 seconds), post-rinse dwell (7 seconds) and condensing period (30 seconds). |
||||||||
Single Tank Door, Hot Water Sanitizing, Pumped Final Rinse |
||||||||
PW10 | 22.3x28.7 | N/A | 23.8 | 120 | 10 | 13 | [6] [14] [16] | |
PW10ER | 22.3x28.7 | N/A | 15.4 | 120 | 10 | 114 | [14] [16] [17] | |
PW10S | 22.3x28.7 | N/A | 17.7 | 120 | 10 | 13 | [6] [14] [16] | |
PW10SER | 22.3x28.7 | N/A | 17.7 | 120 | 10 | 119 | [14] [16] [17] | |
PW20 | 26.1x48 | N/A | 47 | 120 | 10 | 16 | [6] [14] [16] | |
PW20ER | 26.1x48 | N/A | 36.5 | 120 | 12 | 114 | [14] [16] [17] | |
PWV | 22.3x28.7 | N/A | 23.8 | 120 | 10 | 13 | [6] [14] [16] | |
PWVER | 22.3x28.7 | N/A | 15.4 | 120 | 10 | 114 | [14] [16] [17] | |
PWVSER | 22.3x28.7 | N/A | 17.7 | 120 | 10 | 119 | [14] [16] [17] | |
PWVXL | 26.1x48 | N/A | 47 | 120 | 10 | 16 | [6] [14] [16] | |
PWVXLER | 26.1x48 | N/A | 36.5 | 120 | 12 | 114 | [14] [16] [17] | |
[6] Available with power vent fan option. [14] Pumped final rinse, no pressure gauge required. [16] Unit is able to be set at 240 second and 360 second wash cycles. [17] Final rinse water consumption is from building cold water supply. |
||||||||
Single Tank Door, Hot Water Sanitizing, Pumped Fresh Water Rinse |
||||||||
AM16ASR | 20x20 | N/A | 14.9 | 120 | 10 | 23 | [3] [14] [16] [18] | |
AM16BAS | 20x20 | N/A | 16.2 | 120 | 10 | 15 | [3] [14] [16] [18] | |
AM16BASX | 20x20 | N/A | 16.2 | 120 | 10 | 15 | [3] [14] [16] [18] | |
AM16SVL | 20x20 | N/A | 13.5 | 120 | 10 | 43 | [3] [14] [16] [17] [18] [20] | |
AM16SVLT | 20x20 | N/A | 12.8 | 120 | 10 | 53 | [3] [14] [16] [17] [18] [19] | |
AM16TASR | 20x20 | N/A | 14.9 | 120 | 10 | 23 | [3] [14] [16] [18] | |
AM16TBAS | 20x20 | N/A | 16.2 | 120 | 10 | 15 | [3] [14] [16] [18] | |
AM16TBASX | 20x20 | N/A | 16.2 | 120 | 10 | 15 | [3] [14] [16] [18] | |
AM16VLADV | 20x20 | N/A | 13.5 | 120 | 10 | 43 | [3] [14] [16] [17] [18] [20] | |
AM16VLBAS | 20x20 | N/A | 14.2 | 120 | 10 | 35 | [3] [14] [16] [17] [18] [20] | |
AM16VLBASX | 20x20 | N/A | 14.2 | 120 | 10 | 35 | [3] [14] [16] [17] [18] [20] | |
AM16VLTADV | 20x20 | N/A | 12.8 | 120 | 10 | 53 | [3] [14] [16] [17] [18] [19] | |
AM16VLTBAS | 20x20 | N/A | 13.5 | 120 | 10 | 45 | [3] [14] [16] [17] [18] [19] | |
AM16VLTBASX | 20x20 | N/A | 13.5 | 120 | 10 | 45 | [3] [14] [16] [17] [18] [19] | |
[3] This unit has been tested and Certified as a combination Dishwashing/Pot, Pan & Utensil Washing Machine. Please reference this model's Listing under Stationary Rack Dishwashing Machines for this model's specifications for that mode of operation. [14] Pumped final rinse, no pressure gauge required. [16] Unit is able to be set at 240 second and 360 second wash cycles. [17] Final rinse water consumption is from building cold water supply. [18] Corner models rated 15.5 GPH for AM16BAS/AM16BASX, AM16TBAS/AM16TBASX, 14.9 GPH for AM16ASR, AM16TASR, 13.5 GPH for AM16VLBAS/AM16VLBASX, 12.8 GPH for AM16VLTBAS/AM16VLTBASX, 13.5 GPH for AM16VLADV and AM16SVL, 12.2 for AM16VLTADV and AM16SVLT. [19] Includes condensing period (30 seconds). [20] Includes condensing period (20 seconds). |
||||||||
Single Tank Hot Water Sanitizing Door |
||||||||
LXeR | 20x20 | N/A | 6.8 | 215 | 8 | 52 | [14] [17] [21] [22] | |
LXnR | 20x20 | N/A | 6.8 | 215 | 8 | 52 | [14] [17] [21] [22] | |
[14] Pumped final rinse, no pressure gauge required. [17] Final rinse water consumption is from building cold water supply. [21] This unit has been tested and Certified as a combination Dishwashing/Pot, Pan & Utensil Washing Machine when operated with the 215 second wash cycle. Please reference this model's Listing under Stationary Rack Dishwashing Machines for this model's specifications for that mode of operation. [22] Includes wash dwell (10 seconds), post-rinse dwell (5 seconds) and condensing period (40 seconds). |
Facility : Troy, OH
CONVEYOR DISHWASHING MACHINES
Final Rinse | ||||||||
(20 psi) | Conveyor Speed | |||||||
Model | Conveyor | Flow | Usage | (Max.) | Footnotes | |||
Number | Width | gpm | gph | (ft/min.) | ||||
Multiple Tank Rackless Conveyor, Chemical Sanitizing[1] |
||||||||
FT1000iLT | 29.875 | N/A | 150.8 | 8.5 | [3] | |||
[1] The peg spacing for rackless conveyor dishwashers is 2.173 inches, center to center. [3] May include suffix BD for optional blower-dryer. |
||||||||
Multiple Tank Rackless Conveyor, Hot Water Sanitizing[1] |
||||||||
FT1000eER | 29.875 | N/A | 57.6 | 8.5 | [2] [3] [5] | |||
FT1000e | 29.875 | N/A | 57.6 | 8.5 | [5] [6] | |||
FT1000eADV | 29.875 | N/A | 87.6 | 8.5 | [5] [6] [7] | |||
FT1000eADV | 29.875 | N/A | 57.6 | 8.5 | [5] [7] | |||
FT1000e | 29.875 | N/A | 57.6 | 8.5 | [4] [5] | |||
FT1000eER | 29.875 | N/A | 57.6 | 8.5 | [2] [3] [4] [5] [6] | |||
FT1000i | 29.875 | N/A | 77 | 8.5 | [2] [3] [4] | |||
[1] The peg spacing for rackless conveyor dishwashers is 2.173 inches, center to center. [2] Includes Energy Recovery Unit. [3] May include suffix BD for optional blower-dryer. [4] May be provided with fresh water rinse system and pressure gauge. Final rinse pressure 20 ± 5 PSI. [5] May be rated 1.5 gpm/90 gph or 2.0 gpm/120 gph. [6] Provided with chamber 6 inches higher than standard. [7] Provided with energy recovery unit with heat pump. |
||||||||
Single Tank Rackless Conveyor, Chemical Sanitizing[1] |
||||||||
FT1000SiLT | 29.875 | N/A | 150.8 | 6.3 | [3] | |||
[1] The peg spacing for rackless conveyor dishwashers is 2.173 inches, center to center. [3] May include suffix BD for optional blower-dryer. |
||||||||
Single Tank Rackless Conveyor, Hot Water Sanitizing[1] |
||||||||
FT1000Se | 29.875 | N/A | 57.6 | 6.3 | [5] [6] | |||
FT1000Se | 29.875 | N/A | 57.6 | 6.3 | [4] [5] | |||
FT1000SeER | 29.875 | N/A | 57.6 | 6.3 | [2] [3] [4] [5] | |||
FT1000SeER | 29.875 | N/A | 57.6 | 6.3 | [2] [3] [5] [6] | |||
FT1000Si | 29.875 | N/A | 77 | 6.3 | [2] [3] [4] [5] | |||
[1] The peg spacing for rackless conveyor dishwashers is 2.173 inches, center to center. [2] Includes Energy Recovery Unit. [3] May include suffix BD for optional blower-dryer. [4] May be provided with fresh water rinse system and pressure gauge. Final rinse pressure 20 ± 5 PSI. [5] May be rated 1.5 gpm/90 gph or 2.0 gpm/120 gph. [6] Provided with chamber 6 inches higher than standard. |
Facility : Lancaster, PA
STATIONARY RACK DISHWASHING MACHINES
Final Rinse | ||||||||
(20 psi) | Operating Time | |||||||
Model | Rack Size | Flow | Usage | (seconds) | Footnotes | |||
Number | Width | gpm | gph | Wash | Rinse | Dwell | ||
Single Tank Chemical Sanitizing Door (Dual Sanitizing Mode Machines) |
||||||||
AM15 | 20x20 | 4.4 | 47.4 | 38 | 10 | 2 | [1] [2] [3] [4] [5] [6] | |
AM15F | 20x20 | 4.4 | 33 | 38 | 10 | 2 | [1] [2] [4] [5] [6] | |
AM15T | 20x20 | 4.4 | 47.4 | 38 | 10 | 2 | [1] [2] [3] [4] [5] [6] [7] | |
[1] Optional tabling and shelving fully complying with NSF Standard 2 may be provided. [2] Final rinse must contain 50 ppm minimum available chlorine. [3] Corner model is rated 40.8 gph for hot and 46 gph for chemical sanitizing. [4] Includes post-wash dwell (2 seconds). [5] This unit has been tested and Certified as a combination Dishwashing/Pot, Pan & Utensil Washing Machine. Please reference this model's Listing under Stationary Rack Pot, Pan and Utensil Washing Machines for this model's specifications for that mode of operation. [6] Available with power vent fan option. [7] Available with optional front loading kit rated with 33 gph for chemical sanitizing and 30 gph hot water sanitizing. |
||||||||
Single Tank Door (Dual Sanitizing Mode Machines) |
||||||||
AM15 | 20x20 | 4.4 | 42.3 | 38 | 10 | 9 | [1] [3] [5] [8] | |
AM15F | 20x20 | 4.4 | 30 | 38 | 10 | 9 | [1] [5] [8] | |
AM15T | 20x20 | 4.4 | 42.3 | 38 | 10 | 9 | [1] [3] [5] [7] [8] | |
[1] Optional tabling and shelving fully complying with NSF Standard 2 may be provided. [3] Corner model is rated 40.8 gph for hot and 46 gph for chemical sanitizing. [5] This unit has been tested and Certified as a combination Dishwashing/Pot, Pan & Utensil Washing Machine. Please reference this model's Listing under Stationary Rack Pot, Pan and Utensil Washing Machines for this model's specifications for that mode of operation. [7] Available with optional front loading kit rated with 33 gph for chemical sanitizing and 30 gph hot water sanitizing. [8] Includes post-wash dwell (2 seconds) and post-rinse dwell (7 seconds). |
||||||||
Single Tank Door, Chemical Sanitizing, Fresh Water Rinse |
||||||||
AM15SCB | 20x20 | 4.4 | 47.4 | 38 | 10 | 2 | [1] [2] [3] [4] [5] [7] [12] | |
AM15SCB | 20x20 | 4.4 | 38.7 | 38 | 10 | 14 | [1] [2] [4] [5] [9] [10] [11] [12] | |
[1] Optional tabling and shelving fully complying with NSF Standard 2 may be provided. [2] Final rinse must contain 50 ppm minimum available chlorine. [3] Corner model is rated 40.8 gph for hot and 46 gph for chemical sanitizing. [4] Includes post-wash dwell (2 seconds). [5] This unit has been tested and Certified as a combination Dishwashing/Pot, Pan & Utensil Washing Machine. Please reference this model's Listing under Stationary Rack Pot, Pan and Utensil Washing Machines for this model's specifications for that mode of operation. [7] Available with optional front loading kit rated with 33 gph for chemical sanitizing and 30 gph hot water sanitizing. [9] May be provided with optional self-contained condensing system. [10] Corner model is rated 37.9 GPH. [11] Available with optional front loading kit rated 28.4 GPH. [12] May be provided with increased rinse times for reduced pressure as follows: 13 sec at 15 PSI, 14 sec at 12 PSI, 15 sec at 10 PSI. |
||||||||
Single Tank Door, Hot Water Sanitizing, (Pumped Rinse) |
||||||||
AM15SVL | 20x20 | N/A | 22.2 | 58 | 10 | 47 | [1] [5] [13] [14] [15] | |
AM15SVLT | 20x20 | N/A | 22.2 | 58 | 10 | 47 | [1] [5] [7] [13] [14] [15] | |
AM15VL | 20x20 | 4.4 | 28.6 | 38 | 10 | 39 | 16] [1] [5] [13] [14] | |
AM15VLF | 20x20 | 4.4 | 22 | 38 | 10 | 39 | 16] [1] [5] [14] | |
AM15VLT | 20x20 | 4.4 | 28.6 | 38 | 10 | 39 | 16] [1] [5] [7] [13] [14] | |
16] Includes Pot-wash dwell (2 seconds), post-rinse dwell (7 seconds) and condensing period (30 seconds). [1] Optional tabling and shelving fully complying with NSF Standard 2 may be provided. [5] This unit has been tested and Certified as a combination Dishwashing/Pot, Pan & Utensil Washing Machine. Please reference this model's Listing under Stationary Rack Pot, Pan and Utensil Washing Machines for this model's specifications for that mode of operation. [7] Available with optional front loading kit rated with 33 gph for chemical sanitizing and 30 gph hot water sanitizing. [13] Corner model is rated 27.8 gph. [14] Final rinse water is supplied through separate cold water line. [15] Note – water consumption is from building cold water supply. |
STATIONARY RACK POT, PAN, AND UTENSIL WASHING MACHINES
Final Rinse | ||||||||
(20 psi) | Operating Time | |||||||
Model | Rack Size | Flow | Usage | (seconds) | Footnotes | |||
Number | Width | gpm | gph | Wash | Rinse | Dwell | ||
Single Tank Chemical Sanitizing Door (Dual Sanitizing Mode Machines) |
||||||||
AM15 | 20x20 | 4.4 | 18.9 | 120 | 10 | 2 | [1] [2] [3] [4] [5] [6] | |
AM15F | 20x20 | 4.4 | 16.1 | 120 | 10 | 2 | [1] [3] [4] [5] [6] | |
AM15T | 20x20 | 4.4 | 18.9 | 120 | 10 | 2 | [1] [2] [3] [4] [5] [6] [7] | |
[1] Optional tabling and shelving fully complying with NSF Standard 2 may be provided. [2] Corner model is rated 17.5 gph for hot and 18.2 gph for chemical sanitizing. [3] This unit has been tested and Certified as a combination Dishwashing/Pot, Pan & Utensil Washing Machine. Please reference this model's Listing under Stationary Rack Dishwashing Machines for this model's specifications for that mode of operation. [4] Includes post-wash dwell (2 seconds). [5] Final rinse must contain 50 ppm minimum available chlorine. [6] Available with power vent fan option. [7] Available with optional front loading kit rated with 16.1 gph for chemical sanitizing and 15.4 gph hot water sanitizing. |
||||||||
Single Tank Door (Dual Sanitizing Mode Machines) |
||||||||
AM15 | 20x20 | 4.4 | 18.2 | 120 | 10 | 9 | [1] [2] [3] [6] [8] | |
AM15F | 20x20 | 4.4 | 15.4 | 120 | 10 | 9 | [1] [3] [6] [8] | |
AM15T | 20x20 | 4.4 | 18.2 | 120 | 10 | 9 | [1] [2] [3] [6] [7] [8] | |
[1] Optional tabling and shelving fully complying with NSF Standard 2 may be provided. [2] Corner model is rated 17.5 gph for hot and 18.2 gph for chemical sanitizing. [3] This unit has been tested and Certified as a combination Dishwashing/Pot, Pan & Utensil Washing Machine. Please reference this model's Listing under Stationary Rack Dishwashing Machines for this model's specifications for that mode of operation. [6] Available with power vent fan option. [7] Available with optional front loading kit rated with 16.1 gph for chemical sanitizing and 15.4 gph hot water sanitizing. [8] Includes post-wash dwell (4 seconds) and post-rinse dwell (5 seconds). |
||||||||
Single Tank Door, Chemical Sanitizing, Fresh Water Rinse |
||||||||
AM15SCB | 20x20 | 4.4 | 18.9 | 120 | 10 | 2 | [1] [3] [4] [5] [9] | |
[1] Optional tabling and shelving fully complying with NSF Standard 2 may be provided. [3] This unit has been tested and Certified as a combination Dishwashing/Pot, Pan & Utensil Washing Machine. Please reference this model's Listing under Stationary Rack Dishwashing Machines for this model's specifications for that mode of operation. [4] Includes post-wash dwell (2 seconds). [5] Final rinse must contain 50 ppm minimum available chlorine. [9] May be provided with increased rinse times for reduced pressure as follows: 13 sec at 15 PSI, 14 sec at 12 PSI, 15 sec at 10 PSI. |
||||||||
Single Tank Door, Hot Water Sanitizing, (Pumped Rinse) |
||||||||
AM15SVL | 20x20 | N/A | 14.6 | 120 | 10 | 45 | [1] [10] [11] [12] | |
AM15SVLT | 20x20 | N/A | 14.6 | 120 | 10 | 45 | [1] [7] [10] [11] [12] | |
AM15VL | 20x20 | 4.4 | 14.6 | 120 | 10 | 39 | [1] [10] [11] [13] | |
AM15VLF | 20x20 | 4.4 | 13.2 | 120 | 10 | 39 | [1] [11] [13] | |
AM15VLT | 20x20 | 4.4 | 14.6 | 120 | 10 | 39 | [1] [7] [10] [11] [13] | |
[1] Optional tabling and shelving fully complying with NSF Standard 2 may be provided. [7] Available with optional front loading kit rated with 16.1 gph for chemical sanitizing and 15.4 gph hot water sanitizing. [10] Corner model is rated same as straight thru model at 14.6 gph. [11] Final rinse water is supplied through separate cold water line. [12] Pumped final rinse, no pressure gauge required. [13] Includes Pot-wash dwell (2 seconds), post-rinse dwell (7 seconds) and condensing period (30 seconds). |
Facility : Owen Sound, Ontario, Canada
CONVEYOR DISHWASHING MACHINES
Final Rinse | ||||||||
(20 psi) | Conveyor Speed | |||||||
Model | Conveyor | Flow | Usage | (Max.) | Footnotes | |||
Number | Width | gpm | gph | (ft/min.) | ||||
Multiple Tank Rack Conveyor, Chemical Sanitizing |
||||||||
CL64 | 20x20 | 1.9 | 114 | 9.5 | [1] [2] [4] [5] [6] [9] [10] [11] [14] | |||
CL64e | 20x20 | 2.2 | 132 | 9.5 | [1] [2] [3] [4] [5] [6] | |||
CL64eN | 20x20 | 2.2 | 132 | 9.5 | [1] [2] [3] [4] [5] [6] [8] [9] [10] | |||
CL86 | 20x20 | 1.9 | 114 | 9.5 | [1] [2] [4] [5] [6] [9] [10] [11] [14] | |||
CL86C | 20x20 | 1.9 | 114 | 9.5 | [1] [2] [4] [5] [6] [9] [10] [11] [14] | |||
CLCS86e | 20x20 | 2.2 | 132 | 9.5 | [1] [2] [3] [4] [5] [6] | |||
CLCS86eN | 20x20 | 2.2 | 132 | 9.5 | [1] [2] [3] [4] [5] [8] [9] [10] | |||
CLPS86e | 20x20 | 2.2 | 132 | 9.5 | [1] [2] [3] [4] [5] [6] | |||
CLPS86eN | 20x20 | 2.2 | 132 | 9.5 | [1] [2] [3] [4] [5] [6] [8] [9] [10] | |||
[1] Final rinse must contain 50 ppm minimum available chlorine. [2] Unit available with a corner unloader. [3] CLe Series dishwashing machines are also used when incorporating the "Fast Rack" or "FRC" transport system. This system may incorporate one or more CLe Series dishwshing machine(s), fully complying with NSF Standard 2. Model numbers would then become FRCL models rather than CLe models and would indicate the total length of the dishwashing section(s). [4] Unit also accepted when operated as a chemical sanitizing dishwasher provided with a chemical sanitizing pump which is Listed under NSF Standard 29; "Low Temp" must be displayed on the control panel when the machine is first powered up. Minimum wash and rinse temperature is 130°F. Minimum final rinse temperature is 120°F. [5] May be provided with wash chamber 6 inches higher than standard height 24 inches. [6] May be provided with a blower/dryer unit option. [8] Machine also available with “ER” denoting Drain Water Energy Recovery. [9] Machine also available with “ADV” denoting Automatic Soil Removal. [10] Machine rated for Pot and Pan washing. Conveyor speed and water consumption shown is the same for both regular running mode and Pot and Pan mode except that while in Pot and Pan mode, the conveyor will “dwell” 2 times for a specified amount of time (30 second minimum each dwell). During this dwell, the rinse is turned off until 2 seconds before the conveyor indexes. In Pot and Pan mode an average of 43 racks per hour can be run. [11] Machine also available with "BAS" denoting that it is a BASE machine. [14] Pumped final rinse, no pressure gauge required. |
||||||||
Multiple Tank Rack Conveyor, Hot Water Sanitizing |
||||||||
CL64 | 20x20 | 1.9 | 114 | 9.5 | [2] [5] [6] [9] [10] [11] [12] [14] | |||
CL64e | 20x20 | 2.2 | 132 | 9.5 | [2] [3] [5] [6] [7] | |||
CL64eN | 20x20 | 2.2 | 132 | 9.5 | [2] [3] [5] [6] [7] [8] [9] [10] | |||
CL86 | 20x20 | 1.9 | 114 | 9.5 | [2] [5] [6] [9] [10] [11] [12] [14] | |||
CL86C | 20x20 | 1.9 | 114 | 9.5 | [2] [5] [6] [9] [10] [11] [12] [14] | |||
CLCS86e | 20x20 | 2.2 | 132 | 9.5 | [2] [3] [5] [6] [7] | |||
CLCS86eN | 20x20 | 2.2 | 132 | 9.5 | [2] [3] [5] [6] [7] [8] [10] | |||
CLPS86e | 20x20 | 2.2 | 132 | 9.5 | [2] [3] [5] [6] [7] | |||
CLPS86eN | 20x20 | 2.2 | 132 | 9.5 | [2] [3] [5] [6] [7] [8] [9] [10] | |||
[2] Unit available with a corner unloader. [3] CLe Series dishwashing machines are also used when incorporating the "Fast Rack" or "FRC" transport system. This system may incorporate one or more CLe Series dishwshing machine(s), fully complying with NSF Standard 2. Model numbers would then become FRCL models rather than CLe models and would indicate the total length of the dishwashing section(s). [5] May be provided with wash chamber 6 inches higher than standard height 24 inches. [6] May be provided with a blower/dryer unit option. [7] May have suffix "R" indicating energy recovery unit option. [8] Machine also available with “ER” denoting Drain Water Energy Recovery. [9] Machine also available with “ADV” denoting Automatic Soil Removal. [10] Machine rated for Pot and Pan washing. Conveyor speed and water consumption shown is the same for both regular running mode and Pot and Pan mode except that while in Pot and Pan mode, the conveyor will “dwell” 2 times for a specified amount of time (30 second minimum each dwell). During this dwell, the rinse is turned off until 2 seconds before the conveyor indexes. In Pot and Pan mode an average of 43 racks per hour can be run. [11] Machine also available with "BAS" denoting that it is a BASE machine. [12] Machine also available with "DWR" denoting that it uses Drain Water Energy Recovery. [14] Pumped final rinse, no pressure gauge required. |
||||||||
Single Tank Rack Conveyor, Chemical Sanitizing |
||||||||
CL44 | 20x20 | 1.5 | 90 | 5.6 | [1] [2] [4] [5] [6] [9] [10] [11] [12] [14] | |||
CL44e | 20x20 | 2.1 | 126 | 5.6 | [1] [2] [3] [4] [5] [6] | |||
CL44eN | 20x20 | 2.1 | 126 | 5.6 | [1] [2] [3] [4] [5] [6] [8] [9] [10] | |||
CL54 | 20x20 | 1.9 | 114 | 6.8 | [1] [2] [4] [5] [6] [9] [10] [11] [12] [14] | |||
CL54e | 20x20 | 2.3 | 138 | 6.8 | [1] [2] [3] [4] [5] [6] | |||
CL54eN | 20x20 | 2.3 | 138 | 6.8 | [1] [2] [3] [4] [5] [6] [8] [9] [10] | |||
CL66 | 20x20 | 1.5 | 90 | 5.6 | [1] [2] [4] [5] [6] [9] [10] [11] [12] [14] | |||
CL66C | 20x20 | 1.5 | 90 | 5.6 | [1] [2] [4] [5] [6] [9] [10] [11] [12] [14] | |||
CL76 | 20x20 | 1.9 | 114 | 6.8 | [1] [2] [4] [5] [6] [9] [10] [11] [12] [14] | |||
CL76C | 20x20 | 1.9 | 114 | 6.8 | [1] [2] [4] [5] [6] [9] [10] [11] [12] [14] | |||
CLCS66e | 20x20 | 2.1 | 126 | 5.6 | [1] [2] [3] [4] [5] [6] | |||
CLCS66eN | 20x20 | 2.1 | 126 | 5.6 | [1] [2] [3] [4] [5] [6] [8] [9] [10] | |||
CLCS76e | 20x20 | 2.3 | 138 | 6.8 | [1] [2] [3] [4] [5] [6] | |||
CLCS76eN | 20x20 | 2.3 | 138 | 6.8 | [1] [2] [3] [4] [5] [6] [8] [9] [10] | |||
CLPS66e | 20x20 | 2.1 | 126 | 5.6 | [1] [2] [3] [4] [5] [6] | |||
CLPS66eN | 20x20 | 2.1 | 126 | 5.6 | [1] [2] [3] [4] [5] [6] [8] [9] [10] | |||
CLPS76e | 20x20 | 2.3 | 138 | 6.8 | [1] [2] [3] [4] [5] [6] | |||
CLPS76eN | 20x20 | 2.3 | 138 | 6.8 | [1] [2] [3] [4] [5] [6] [8] [9] [10] | |||
[1] Final rinse must contain 50 ppm minimum available chlorine. [2] Unit available with a corner unloader. [3] CLe Series dishwashing machines are also used when incorporating the "Fast Rack" or "FRC" transport system. This system may incorporate one or more CLe Series dishwshing machine(s), fully complying with NSF Standard 2. Model numbers would then become FRCL models rather than CLe models and would indicate the total length of the dishwashing section(s). [4] Unit also accepted when operated as a chemical sanitizing dishwasher provided with a chemical sanitizing pump which is Listed under NSF Standard 29; "Low Temp" must be displayed on the control panel when the machine is first powered up. Minimum wash and rinse temperature is 130°F. Minimum final rinse temperature is 120°F. [5] May be provided with wash chamber 6 inches higher than standard height 24 inches. [6] May be provided with a blower/dryer unit option. [8] Machine also available with “ER” denoting Drain Water Energy Recovery. [9] Machine also available with “ADV” denoting Automatic Soil Removal. [10] Machine rated for Pot and Pan washing. Conveyor speed and water consumption shown is the same for both regular running mode and Pot and Pan mode except that while in Pot and Pan mode, the conveyor will “dwell” 2 times for a specified amount of time (30 second minimum each dwell). During this dwell, the rinse is turned off until 2 seconds before the conveyor indexes. In Pot and Pan mode an average of 43 racks per hour can be run. [11] Machine also available with "BAS" denoting that it is a BASE machine. [12] Machine also available with "DWR" denoting that it uses Drain Water Energy Recovery. [14] Pumped final rinse, no pressure gauge required. |
||||||||
Single Tank Rack Conveyor, Hot Water Sanitizing |
||||||||
CL44 | 20x20 | 1.5 | 90 | 5.6 | [2] [5] [6] [9] [10] [11] [12] [14] | |||
CL44VL | 20x20 | 1.5 | 90 | 5.6 | [10] [13] [14] | |||
CL44e | 20x20 | 2.1 | 126 | 5.6 | [2] [3] [5] [6] [7] | |||
CL44eN | 20x20 | 2.1 | 126 | 5.6 | [2] [3] [5] [6] [7] [8] [9] [10] | |||
CL44eNVL | 20x20 | 2.1 | 126 | 5.6 | [3] [10] | |||
CL54 | 20x20 | 1.9 | 114 | 6.8 | [2] [5] [6] [9] [10] [11] [12] [14] | |||
CL54e | 20x20 | 2.3 | 138 | 6.8 | [2] [3] [5] [6] [7] | |||
CL54eN | 20x20 | 2.3 | 138 | 6.8 | [2] [3] [5] [6] [7] [8] [9] [10] | |||
CL66 | 20x20 | 1.5 | 90 | 5.6 | [2] [5] [6] [9] [10] [11] [12] [14] | |||
CL66C | 20x20 | 1.5 | 90 | 5.6 | [2] [5] [6] [9] [10] [11] [12] [14] | |||
CL66VL | 20x20 | 1.5 | 90 | 5.6 | [10] [13] [14] | |||
CL76 | 20x20 | 1.9 | 114 | 6.8 | [2] [5] [6] [9] [10] [11] [12] [14] | |||
CL76C | 20x20 | 1.9 | 114 | 6.8 | [2] [5] [6] [9] [10] [11] [12] [14] | |||
CLCS66e | 20x20 | 2.1 | 126 | 5.6 | [2] [3] [5] [6] [7] | |||
CLCS66eN | 20x20 | 2.1 | 126 | 5.6 | [2] [3] [5] [6] [7] [8] [9] [10] | |||
CLCS76e | 20x20 | 2.3 | 138 | 6.8 | [2] [3] [5] [6] [7] | |||
CLCS76eN | 20x20 | 2.3 | 138 | 6.8 | [2] [3] [5] [6] [7] [8] [9] [10] | |||
CLPS66e | 20x20 | 2.1 | 126 | 5.6 | [2] [3] [5] [6] [7] | |||
CLPS66eN | 20x20 | 2.1 | 126 | 5.6 | [2] [3] [5] [6] [7] [8] [9] [10] | |||
CLPS66eNVL | 20x20 | 2.1 | 126 | 5.6 | [3] [10] | |||
CLPS76e | 20x20 | 2.3 | 138 | 6.8 | [2] [3] [5] [6] [7] | |||
CLPS76eN | 20x20 | 2.3 | 138 | 6.8 | [2] [3] [5] [6] [7] [8] [9] [10] | |||
[2] Unit available with a corner unloader. [3] CLe Series dishwashing machines are also used when incorporating the "Fast Rack" or "FRC" transport system. This system may incorporate one or more CLe Series dishwshing machine(s), fully complying with NSF Standard 2. Model numbers would then become FRCL models rather than CLe models and would indicate the total length of the dishwashing section(s). [5] May be provided with wash chamber 6 inches higher than standard height 24 inches. [6] May be provided with a blower/dryer unit option. [7] May have suffix "R" indicating energy recovery unit option. [8] Machine also available with “ER” denoting Drain Water Energy Recovery. [9] Machine also available with “ADV” denoting Automatic Soil Removal. [10] Machine rated for Pot and Pan washing. Conveyor speed and water consumption shown is the same for both regular running mode and Pot and Pan mode except that while in Pot and Pan mode, the conveyor will “dwell” 2 times for a specified amount of time (30 second minimum each dwell). During this dwell, the rinse is turned off until 2 seconds before the conveyor indexes. In Pot and Pan mode an average of 43 racks per hour can be run. [11] Machine also available with "BAS" denoting that it is a BASE machine. [12] Machine also available with "DWR" denoting that it uses Drain Water Energy Recovery. [13] Machine also available with "VL" denoting that it is a Ventless option utilizing a heat pump. [14] Pumped final rinse, no pressure gauge required. |
GLASSWASHING MACHINES
Single Temperature, Single Cup Hot Water Sanitizing Glasswasher[1] |
|
SCL | |
SCW | |
[1] Post Rinse “ON” (5 second sani rinse, 5 second post sani rinse). |
Facility : Offenburg, Germany
GLASSWASHING MACHINES
Single Temperature, Single Cup Hot Water Sanitizing Glasswasher[1] |
|
SCL | |
SCW | |
[1] Post Rinse “ON” (5 second sani rinse, 5 second post sani rinse). |
STATIONARY RACK DISHWASHING MACHINES
Final Rinse | ||||||||
(20 psi) | Operating Time | |||||||
Model | Rack Size | Flow | Usage | (seconds) | Footnotes | |||
Number | Width | gpm | gph | Wash | Rinse | Dwell | ||
Single Tank, Hot Water Sanitizing[1] [2] |
||||||||
AMTL | 20x20 | N/A | 34.6 | 35 | 11 | 14 | [3] | |
AMTL | 20x20 | N/A | 37.5 | 35 | 11 | 14 | [4] [5] | |
AMTL | 20x20 | N/A | 45.9 | 35 | 11 | 14 | [5] [6] | |
[1] Unit consists of two levels. Upper level washes one rack of dishes for every cycle. Lower level is front load and may a) remain off, b) wash one rack of dishes for each cycle or c) wash one rack of dishes every 3 cycles. [2] This unit has been tested and Certified as a combination Dishwashing/Pot, Pan & Utensil Washing Machine. Please reference this model's Listing under Stationary Rack Pot, Pan and Utensil Washing Machines for this model's specifications for that mode of operation. [3] When washing one rack every cycle in the upper section and no racks in the lower section. [4] When washing one rack every cycle in the upper section and one rack every three cycles in the lower section. [5] The lower section rinse time is 5.5 seconds and the dwell time is 19.5 seconds. [6] When washing one rack every cycle in the upper section and one rack every cycle in the lower section. (Two racks washed every cycle). |
STATIONARY RACK POT, PAN, AND UTENSIL WASHING MACHINES
Final Rinse | ||||||||
(20 psi) | Operating Time | |||||||
Model | Rack Size | Flow | Usage | (seconds) | Footnotes | |||
Number | Width | gpm | gph | Wash | Rinse | Dwell | ||
Single Tank, Hot Water Sanitizing[1] [2] |
||||||||
AMTL | 20x20 | N/A | 15.1 | 120 | 11 | 14 | [3] | |
AMTL | 20x20 | N/A | 17 | 120 | 11 | 14 | [4] [5] | |
AMTL | 20x20 | N/A | 24.8 | 120 | 11 | 14 | [5] [6] | |
[1] Unit consists of two levels. Upper level washes one rack of pots, pans, and utensils for every cycle. Lower level is front load and may a) remain off, b) wash one rack of dishes for each cycle or c) wash one rack of dishes every 3 cycles. The lower rack is not certified for washing Pots, Pans, & Utensils. [2] This unit has been tested and Certified as a combination Dishwashing/Pot, Pan & Utensil Washing Machine. Please reference this model's Listing under Dishwashing Machines for this model's specifications for that mode of operation. [3] When washing one rack every cycle in the upper section and no racks in the lower section. [4] When washing one rack every cycle in the upper section and one rack every three cycles in the lower section. [5] The lower section rinse time is 5.5 seconds and the dwell time is 19.5 seconds. [6] When washing one rack every cycle in the upper section and one rack every cycle in the lower section. (Two racks washed every cycle). |
Insinger Machine Company (The) | |
6245 State Road | |
Philadelphia, PA 19135 | |
United States | |
215-624-4800 | |
Visit this company's website |
Facility : Philadelphia, PA
CONVEYOR DISHWASHING MACHINES
Final Rinse | ||||||||
(20 psi) | Conveyor Speed | |||||||
Model | Conveyor | Flow | Usage | (Max.) | Footnotes | |||
Number | Width | gpm | gph | (ft/min.) | ||||
Single Tank Rack Conveyor, Hot Water Sanitizing |
||||||||
Admiral 44-4 | 20x20 | 2.5 | 147 | 6.4 | ||||
Admiral 66-4 | 20x20 | 2.5 | 147 | 6.4 | ||||
Tray Washer Multiple Tank Conveyor, Hot Water Sanitizing |
||||||||
TRAC 321-2 | N/A | 4.14 | 248 | 11 | [1] [10] | |||
TRAC-878 | N/A | 3.28 | 196.64 | 18.3 | [10] | |||
[1] These conveyor type machines may be furnished with RPW recirculating pre-wash, built integral with the machines as accessory equipment. Water comes from wash water overflow only. [10] Acceptable with a power scrapper, TD-321-2 tray dryer, and/or tray stacker. |
||||||||
Multiple Tank Rack Conveyor, Hot Water Sanitizing |
||||||||
GalleyMaster 135 | 20x20 | 4.0 | 240 | 3.7 | [4] [9] | |||
GalleyMaster 185 | 20x20 | 4.0 | 240 | 5.1 | [4] [9] | |||
GalleyMaster 250 | 20x20 | 4.0 | 240 | 7 | [4] [9] | |||
GalleyMaster 60 | 20x20 | 4.0 | 240 | 1.6 | [4] [9] | |||
GalleyMaster 85 | 20x20 | 4.0 | 240 | 2.3 | [4] [9] | |||
R-106-2 | 20x20 | 2 | 240 | 10 | [1] | |||
Speeder 64 | 20x20 | 2.4 | 144 | 7.7 | [5] | |||
Speeder 86-3 | 20x20 | 2.4 | 144 | 7.7 | ||||
Super 106-2 | 20x20 | 4 | 240 | 9.2 | ||||
[1] These conveyor type machines may be furnished with RPW recirculating pre-wash, built integral with the machines as accessory equipment. Water comes from wash water overflow only. [4] Listing with suffix LH or RH (for left to right or right to left conveyor direction) and with suffix S or E (for steam or electric tank and booster heat). [5] With beginning serial number 938038. [9] Make-up water is provided from final rinse source of supply. Sizing of water heaters should be based on additional demand (not to exceed .9 gpm). |
||||||||
Multiple Tank Rackless Conveyor, Hot Water Sanitizing |
||||||||
Century 14 | 26 | 3.8 | 228 | 7 | [6] | |||
Defender-(1) | 26 | 5.1 | 306 | 7.1 | [7] | |||
[6] The peg spacing for rackless conveyor dishwasher models Century, Clipper, and Master is 2 1/2", center to center. [7] (1) represents length of dishmachine in feet (12 - 17). |
||||||||
COMPONENTS: |
||||||||
Multiple Tank Rack Conveyor, Chemical Sanitizing |
||||||||
Speeder 64CS | 20x20 | 2.4 | 144 | 7.7 | [5] [11] | |||
Speeder 86-3CS | 20x20 | 2.4 | 144 | 7.7 | [11] | |||
Super 106-2CS | 20x20 | 4 | 240 | 9.2 | [11] | |||
[5] With beginning serial number 938038. [11] Nonrecirculated, fresh water, final rinse, 50 ppm available chlorine. |
||||||||
Single Tank Rack Conveyor, Chemical Sanitizing |
||||||||
Admiral 44-4CS | 20x20 | 2.5 | 147 | 6.4 | [11] | |||
Admiral 66-4CS | 20x20 | 2.5 | 147 | 6.4 | [11] | |||
[11] Nonrecirculated, fresh water, final rinse, 50 ppm available chlorine. |
[2] (1) represents length of dishmachine, in feet (18 - 33). [3] (1) represents length of dishmachine, in feet (16 - 31). [8] Unit is a four tank machine.
STATIONARY RACK DISHWASHING MACHINES
Final Rinse | ||||||||
(20 psi) | Operating Time | |||||||
Model | Rack Size | Flow | Usage | (seconds) | Footnotes | |||
Number | Width | gpm | gph | Wash | Rinse | Dwell | ||
Hot Water Single Tank Stationary Rack |
||||||||
45SA-5 | 16x16 | 5.4 | 48.8 | 38 | 12 | 0 | ||
Ensign 40-2 Automatic | 16x16 | 5.4 | 48.8 | 38 | 12 | 0 | ||
CX20 Series |
||||||||
CX20 | 20x20 | 0.6 | 38.4 | 20 | 10 | 25 |
STATIONARY RACK POT, PAN, AND UTENSIL WASHING MACHINES
Final Rinse | ||||||||
(20 psi) | Operating Time | |||||||
Model | Rack Size | Flow | Usage | (seconds) | Footnotes | |||
Number | Width | gpm | gph | Wash | Rinse | Dwell | ||
Single Tank Stationary Rack - Hot Water Sanitizing |
||||||||
CA-3 | 24x28 | 11.2 | 70 | 120 | 15 | 0 | ||
DA-3 | 2*24x28 | 22.4 | 140 | 120 | 15 | 0 |
Insinger Machine Company (The) | |
6245 State Road | |
Philadelphia, PA 19135 | |
United States | |
215-624-4800 |
Facility : # 2 USA
STATIONARY RACK POT, PAN, AND UTENSIL WASHING MACHINES
Final Rinse | ||||||||
(20 psi) | Operating Time | |||||||
Model | Rack Size | Flow | Usage | (seconds) | Footnotes | |||
Number | Width | gpm | gph | Wash | Rinse | Dwell | ||
Single Tank Stationary Rack - Hot Water Sanitizing [8] |
||||||||
SW-12-C | 28x29 | 4.5 | 49.5 | 180 | 60 | 19 | [1] | |
SW-12-F | 28x29 | 4.5 | 49.5 | 180 | 60 | 19 | [1] [2] | |
SW-12-P | 28x29 | 4.5 | 49.5 | 180 | 60 | 19 | [1] | |
SW-14-F | 31.5x37 | 5.0 | 65 | 180 | 60 | 18 | [1] [2] | |
SW-14-P | 31.5x37 | 5.0 | 65 | 180 | 60 | 18 | [1] | |
SW-25-F | 26x29 | 7.1 | 94.6 | 180 | 40 | 20 | [6] [7] | |
SW-36-F | 33x73 | 16.2 | 162 | 180 | 40 | 18 | [1] [4] | |
SW-48-RI | 45x75 | 14 | 168 | 180 | 60 | 30 | [1] [3] | |
SW-78-RI | 2*33x70 | 26 | 311 | 180 | 60 | 30 | [5] [6] | |
[1] May or may not contain a suffix: E - Electric G - Gas S - Steam [2] Available options: Rack Hanger [3] Beginning with serial number 4xxx-xxxx-4000 [4] Beginning with serial number 6xxx-xxxx-1701 [5] Beginning with serial number 5xxx-xxxx-0050 [6] May or may not contain a suffix: E - Electric G - Gas RS - Recirculating steam S - Steam [7] Beginning with serial number 7xxx-xxxx-2935 [8] Wash arm assemblies may have alternate assemblies utilizing plastic plugs and different cleaning procedures. |
Jackson WWS, Inc. | |
6209 North US Highway 25 East | |
Gray, KY 40734 | |
United States | |
888-800-JMSC | |
606-523-9795 | |
Visit this company's website |
Facility : Barbourville, KY
CONVEYOR DISHWASHING MACHINES
Final Rinse | ||||||||
(20 psi) | Conveyor Speed | |||||||
Model | Conveyor | Flow | Usage | (Max.) | Footnotes | |||
Number | Width | gpm | gph | (ft/min.) | ||||
Multiple Tank Rack Conveyor - Hot Water Sanitizing |
||||||||
AJ-100 | 20x20 | 3.7 | 222 | 8 | [1] [2] [10] | |||
AJ-64 | 20x20 | 3.7 | 222 | 8 | [1] [10] | |||
AJ-86 | 20x20 | 3.7 | 222 | 8 | [1] [2] [10] | |||
[1] Model designation may have suffix CE for electrically heated, CS for steam heated, or CGP for gas heated. Gas heated machines have a single-source gas booster which also maintains the appropriate wash tank temperature. [2] With recirculated prewash. Prewash temperature 110° - 140°F is obtained from wash tank overflow and fresh water supply. [10] Unit may be equipped with modular heat recovery/vapor removal system that is connected on both the load and unload ends of the unit. Modules may use existing installation ventilation system to move vapor or may be equipped with ventilation fans to move air as required. |
||||||||
Single Tank Rack Conveyor - Hot Water Sanitizing [10] |
||||||||
AJ-44 | 20x20 | 3.9 | 234 | 6.9 | [3] | |||
AJ-44 | 20x20 | 2.4 | 144 | 5.7 | [4] [5] | |||
AJ-54 | 20x20 | 4.6 | 279 | 7.5 | [1] | |||
AJ-66 | 20x20 | 3.9 | 234 | 6.9 | [1] [2] [3] | |||
AJ-66 | 20x20 | 2.4 | 144 | 5.7 | [4] [5] | |||
AJ-76 | 20x20 | 4.6 | 279 | 7.5 | [1] [2] | |||
AJ-80 | 20x20 | 2.4 | 144 | 5.7 | [4] [5] | |||
AJ-80 | 20x20 | 3.9 | 234 | 6.9 | [1] [2] [3] | |||
AJ-90 | 20x20 | 4.6 | 279 | 7.5 | [1] [2] | |||
AJX-44 | 20x20 | 2.6 | 154.3 | 6.2 | [3] [6] [7] | |||
AJX-54 | 20x20 | 2.6 | 154.3 | 6.3 | [3] [6] [7] | |||
AJX-66 | 20x20 | 2.6 | 154.3 | 6.2 | [2] [3] [6] [7] | |||
AJX-76 | 20x20 | 2.6 | 154.3 | 6.2 | [2] [3] [6] [7] | |||
AJX-80 | 20x20 | 2.6 | 154.3 | 6.2 | [2] [3] [6] [7] | |||
AJX-90 | 20x20 | 2.6 | 154.3 | 6.2 | [2] [3] [6] [7] | |||
WareForce 44H | 20x20 | 2.6 | 154.3 | 6.2 | [3] [6] | |||
WareForce 66H | 20x20 | 2.6 | 154.3 | 6.2 | [2] [3] [6] | |||
[1] Model designation may have suffix CE for electrically heated, CS for steam heated, or CGP for gas heated. Gas heated machines have a single-source gas booster which also maintains the appropriate wash tank temperature. [2] With recirculated prewash. Prewash temperature 110° - 140°F is obtained from wash tank overflow and fresh water supply. [3] Units produced after February 15, 2007 may be dual temperature convertible models. [4] Model designation may have suffix E for electrically heated, G for gas heated, or S for steam heated. [5] Model designation may have suffix T to indicate Traditional series. [6] Final rinse flow and usage are based on a 15 PSI flow pressure. [7] Model designation may have suffix CE for electrically heated, CG for gas heated, or S for steam heated. [10] Unit may be equipped with modular heat recovery/vapor removal system that is connected on both the load and unload ends of the unit. Modules may use existing installation ventilation system to move vapor or may be equipped with ventilation fans to move air as required. |
||||||||
COMPONENTS: |
||||||||
Single Tank Rack Conveyor - Chemical Sanitizing [10] |
||||||||
AJ-44 | 20x20 | 3.9 | 234 | 6.5 | [3] [8] [9] | |||
AJ-66 | 20x20 | 3.9 | 234 | 6.5 | [2] [3] [8] [9] | |||
AJ-80 | 20x20 | 3.9 | 234 | 6.9 | [2] [3] [8] [9] | |||
AJX-44 | 20x20 | 2.7 | 164.4 | 5.8 | [3] [6] [7] [9] | |||
AJX-54 | 20x20 | 2.6 | 154.3 | 6.2 | [3] [6] [7] | |||
AJX-66 | 20x20 | 2.7 | 164.4 | 5.8 | [2] [6] [7] [9] | |||
AJX-76 | 20x20 | 2.6 | 154.3 | 6.2 | [2] [3] [6] [7] [9] | |||
AJX-80 | 20x20 | 2.7 | 164.4 | 5.8 | [2] [3] [6] [7] [9] | |||
AJX-90 | 20x20 | 2.6 | 154.3 | 6.2 | [2] [3] [6] [7] [9] | |||
WareForce 44L | 20x20 | 2.7 | 164.4 | 5.8 | [3] [9] | |||
WareForce 66L | 20x20 | 2.7 | 164.4 | 5.8 | [2] [3] [6] [9] | |||
[2] With recirculated prewash. Prewash temperature 110° - 140°F is obtained from wash tank overflow and fresh water supply. [3] Units produced after February 15, 2007 may be dual temperature convertible models. [6] Final rinse flow and usage are based on a 15 PSI flow pressure. [7] Model designation may have suffix CE for electrically heated, CG for gas heated, or S for steam heated. [8] Model designation may have suffix CEL for electrically heated or CSL for steam heated. [9] Nonrecirculated, fresh water, final rinse, 50 ppm available chlorine. [10] Unit may be equipped with modular heat recovery/vapor removal system that is connected on both the load and unload ends of the unit. Modules may use existing installation ventilation system to move vapor or may be equipped with ventilation fans to move air as required. |
GLASSWASHING MACHINES
Chemical Sanitizing Conveyor Glasswasher |
|
Delta 115 | |
Delta 1200 | |
WareForce CG-115 | |
WareForce CG1200 |
STATIONARY RACK DISHWASHING MACHINES
Final Rinse | ||||||||
(20 psi) | Operating Time | |||||||
Model | Rack Size | Flow | Usage | (seconds) | Footnotes | |||
Number | Width | gpm | gph | Wash | Rinse | Dwell | ||
Single Tank Door - Chemical Sanitizing |
||||||||
Delta 5 | 20x20 | N/A | 36 | 43 | 24 | 18 | ||
Delta 5 | 20x20 | N/A | 36 | 46 | 25 | 21 | ||
Delta 5E | 20x20 | N/A | 36 | 46 | 25 | 21 | ||
WareForce DG-E | 20x20 | N/A | 36 | 43 | 24 | 18 | ||
Single Tank Hood - Hot Water Sanitizing |
||||||||
10A | 17xdia. | 7.8 | 58 | 60 | 10 | 2 | [23] | |
10APRB | 17xdia. | 7.8 | 58 | 60 | 10 | 2 | [24] | |
10APRB-M | 17xdia. | 7.8 | 58 | 60 | 10 | 2 | [24] | |
10U | 17xdia. | 7.8 | 58 | 60 | 10 | 2 | [23] | |
[23] Model designation may have suffix B to designate an integral booster for a minimum 40°F temperature rise. [24] Model comes with an integral booster for a minimum 40°F temperature rise. |
[11] Model will always be supplied with sanitizer pump, however detergent and rinse aid feeders are optional. [19] Extended Wash Cycle Option (262 seconds) available. [20] Model may have detergent or rinse aid chemical feeder pump or both. [21] Unit is supplied with integral booster for minimum 40°F rinse temperature rise. [22] Non-steam-heated models without integral booster require 180°F minimum fresh water hook-up.
Jeros A/S | |
Nyborgvej 8 | |
5750 Ringe | |
Denmark | |
45 63 62 39 13 | |
Visit this company's website |
Facility : Ringe, Denmark
STATIONARY RACK DISHWASHING MACHINES
Final Rinse | ||||||||
(20 psi) | Operating Time | |||||||
Model | Rack Size | Flow | Usage | (seconds) | Footnotes | |||
Number | Width | gpm | gph | Wash | Rinse | Dwell | ||
Chemical Sanitizing Stationary Rack Dishwasher |
||||||||
9110UC | 20x20 | N/A | 13.5 | 360 | 30 | 20 | ||
9130UC | 15x29.5 | .58 | 34.82 | 360 | 30 | 5 | ||
Hot Water Sanitizing Stationary Rack Dishwasher |
||||||||
9110UH | 20x20 | N/A | 11.6 | 360 | 30 | 20 | [1] | |
9130UH | 51x29.5 | .58 | 34.82 | 360 | 30 | 5 | ||
[1] Unit also accepted with optional steam converter and 497 sec. time cycle in which the following would apply: Wash - 360 sec. Rinse - 30 sec. Dwell - 107 sec. Final rinse usage: 11.3 gph |
Krowne Metal Corporation | |
100 Haul Road | |
Wayne, NJ 07470 | |
United States | |
973-305-3300 |
Facility : Jordan Station, Ontario, Canada
GLASSWASHING MACHINES
GWP Glasswasher[1] |
|
GWP-4L | |
GWP-4R | |
GWP-6L | |
GWP-6R | |
[1] May have suffix M followed by number 1 - 99. |
|
GWR-24 Glasswasher[1] [2] |
|
GWR-24 | |
GWR-24L | |
GWR-24R | |
[1] May have suffix M followed by number 1 - 99. [2] May have suffix CW or CCW. |
STATIONARY RACK DISHWASHING MACHINES
Final Rinse | ||||||||
(20 psi) | Operating Time | |||||||
Model | Rack Size | Flow | Usage | (seconds) | Footnotes | |||
Number | Width | gpm | gph | Wash | Rinse | Dwell | ||
Single Tank, Chemical Sanitizing Undercounter Dishwasher |
||||||||
GWD-24 | 20x20 | 5.82 | 48.9 | 45 | 17 | 28 | [1] [2] | |
[1] May have suffix M followed by number 1 - 99. [2] Units are also approved for use as glasswashers. |
||||||||
Single Tank, Hot Water, Undercounter Dishwasher |
||||||||
GWH-24 | 20x20 | 3.11 | 25.2 | 70 | 16 | 4 | [1] [2] | |
[1] May have suffix M followed by number 1 - 99. [2] Units are also approved for use as glasswashers. |
LVO Manufacturing, Inc. | |
808 N 2nd Avenue E | |
P.O. Box 188 | |
Rock Rapids, IA 51246 | |
United States | |
800-346-5749 | |
712-472-3734 |
Facility : Rock Rapids, IA
STATIONARY RACK POT, PAN, AND UTENSIL WASHING MACHINES
Final Rinse | ||||||||
(20 psi) | Operating Time | |||||||
Model | Rack Size | Flow | Usage | (seconds) | Footnotes | |||
Number | Width | gpm | gph | Wash | Rinse | Dwell | ||
Single Tank Stationary Rack - Hot Water Sanitizing[1] |
||||||||
CL-10 | 28x29 | 4.5 | 49.5 | 180 | 60 | 19 | [2] | |
FL-10 | 28x29 | 4.5 | 49.5 | 180 | 60 | 19 | [2] [3] | |
FL-14 | 31.5x37 | 5.0 | 65 | 180 | 60 | 18 | [2] [3] | |
FL 25 | 26x29 | 7.1 | 94.6 | 180 | 40 | 20 | [4] [5] | |
FL 36 | 33x73 | 16.2 | 162 | 180 | 40 | 18 | [2] [6] | |
PT-10 | 28x29 | 4.5 | 49.5 | 180 | 60 | 19 | [2] | |
PT-14 | 31.5x37 | 5.0 | 65 | 180 | 60 | 18 | [2] | |
PT 25 | 26x29 | 7.1 | 94.6 | 180 | 40 | 20 | [4] [5] | |
RW 1548 | 45x75 | 14 | 168 | 180 | 60 | 30 | [2] [7] | |
RW 2580 | 2*33x70 | 26 | 311 | 180 | 60 | 30 | [4] [8] | |
RW 2580PT | 2*33x70 | 26 | 311 | 180 | 60 | 30 | [6] [8] | |
RW 40120PT | 3*33x70 | 39 | 467 | 180 | 60 | 30 | [2] [9] | |
[1] Wash arm assemblies may have alternate assemblies utilizing plastic plugs and different cleaning procedures. [2] May or may not contain a suffix: E - Electric G - Gas S - Steam [3] Available options: Rack Hanger [4] May or may not contain a suffix: E - Electric G - Gas RS - Recirculating steam S - Steam [5] Beginning with serial number 7xxx-xxxx-2935 [6] Beginning with serial number 6xxx-xxxx-1701 [7] Beginning with serial number 4xxx-xxxx-4000 [8] Beginning with serial number 5xxx-xxxx-0050 [9] Beginning with serial number 8xxx-xxxx-xxxx. |
Meiko Maschinenbau GmbH & Co. | |
Englerstrasse 3 | |
P.O. Box 2040 | |
D-77652 Offenburg | |
Germany | |
49 781 2030 | |
Visit this company's website |
Facility : La Vergne, TN
CONVEYOR DISHWASHING MACHINES
Final Rinse | ||||||||
(20 psi) | Conveyor Speed | |||||||
Model | Conveyor | Flow | Usage | (Max.) | Footnotes | |||
Number | Width | gpm | gph | (ft/min.) | ||||
Multiple Tank Rack Conveyor - Hot Water Sanitizing |
||||||||
KA-100 | 20x20 | 1.43 | 86 | 9.88 | [1] | |||
KA-64 | 20x20 | 1.43 | 86 | 9.88 | ||||
KA-86 | 20x20 | 1.43 | 86 | 9.88 | [2] | |||
[1] Available with optional “Prewash 36” [2] Available with optional “Prewash 22” |
||||||||
Single Tank Rack Conveyor - Hot Water Sanitizing |
||||||||
KA-44 | 20x20 | 1.18 | 71 | 6.75 | ||||
KA-54 | 20x20 | 1.18 | 71 | 6.75 | ||||
KA-66 | 20x20 | 1.18 | 71 | 6.75 | [2] | |||
KA-76 | 20x20 | 1.18 | 71 | 6.75 | [2] | |||
KA-80 | 20x20 | 1.18 | 71 | 6.75 | [1] | |||
KA-90 | 20x20 | 1.18 | 71 | 6.75 | [1] | |||
[1] Available with optional “Prewash 36” [2] Available with optional “Prewash 22” |
Facility : Offenburg, Germany
CONVEYOR DISHWASHING MACHINES
Final Rinse | ||||||||
(20 psi) | Conveyor Speed | |||||||
Model | Conveyor | Flow | Usage | (Max.) | Footnotes | |||
Number | Width | gpm | gph | (ft/min.) | ||||
Multiple Tank Rack Conveyor - Hot Water Sanitizing |
||||||||
K-L54 V6 P8 | 20x20 | .74 | 44.7 | 8.27 | [1] | |||
K-L54 V8 P8 | 20x20 | .74 | 44.7 | 8.27 | [1] | |||
K-M54 V6 P8 | 20x20 | .73 | 44 | 5.8 | [1] | |||
K-M54 V8 P8 | 20x20 | .73 | 44 | 6.37 | [1] | |||
K-S54 P8 | 20x20 | .76 | 46 | 4.34 | [1] | |||
K-XL54 V6 P8 | 20x20 | .74 | 44.7 | 8.27 | [1] | |||
K-XL54 V8 P8 | 20x20 | .74 | 44.7 | 8.27 | [1] | |||
KA-100 | 20x20 | 1.43 | 86 | 9.88 | [2] | |||
KA-64 | 20x20 | 1.43 | 86 | 9.88 | ||||
KA-86 | 20x20 | 1.43 | 86 | 9.88 | [3] | |||
[1] Model numbers including an "N" in the suffix indicate the option of one or two distance elements between prewash and wash tank and/or between wash tank and pumped final rinse tank. [2] Available with optional “Prewash 36” [3] Available with optional “Prewash 22” |
||||||||
Multiple Tank Rackless Conveyor - Hot Water Sanitizing - M-iQ Range [4] |
||||||||
B-L74 (1) V8 P8 HA 2S | 29.5 | 1.34 | 80.58 | 5.84 | [5] [6] | |||
B-L74 V6 (1) P8 | 29.5 | .96 | 57.87 | 8.3 | [6] [7] | |||
B-L74 V8 (1) P8 | 29.5 | .98 | 58.95 | 9.0 | [6] [7] | |||
B-L94 V6 (1) P8 | 29.5 | 1.27 | 76 | 8.3 | [6] | |||
B-L94 V8 (1) P8 | 29.5 | 1.28 | 77 | 9.0 | [6] | |||
B-M74 (1) V6 P8 HA 2S | 29.5 | 1.19 | 71.33 | 3.5 | [5] [6] | |||
B-M74 (1) V8 P8 HA 2S | 29.5 | 1.23 | 73.98 | 4.86 | [5] [6] | |||
B-M74 V6 (1) P8 | 29.5 | .94 | 56.2 | 6.0 | [6] [7] | |||
B-M74 V8 (1) P8 | 29.5 | .95 | 56.8 | 6.5 | [6] [7] | |||
B-M94 V6 (1) P8 | 29.5 | 1.23 | 74 | 6.0 | [6] | |||
B-M94 V8 (1) P8 | 29.5 | 1.25 | 75 | 6.5 | [6] | |||
B-S74 (1) P8 | 29.5 | .95 | 56.8 | 4.5 | [6] [7] | |||
B-S74 (1) P8 HA 2S | 29.5 | 1.21 | 72.66 | 2.6 | [5] [6] | |||
B-S94 (1) P8 | 29.5 | 1.25 | 75 | 4.5 | [6] | |||
B-XL74 V6 (1) P8 | 29.5 | .98 | 58.95 | 9.0 | [6] [7] | |||
B-XL74 V8 (1) P8 | 29.5 | .98 | 58.95 | 9.0 | [6] [7] | |||
B-XL94 V6 (1) P8 | 29.5 | 1.28 | 77 | 9.0 | [6] | |||
B-XL94 V8 (1) P8 | 29.5 | 1.28 | 77 | 9.0 | [6] | |||
B_L124 V6 (1) P8 | 48 | 1.59 | 95.4 | 8.3 | [3] [5] | |||
B_L124 V8 (1) P8 | 48 | 1.6 | 96.1 | 9 | [3] [5] | |||
B_L125 V6 N22 (1) P8 | 48.0 | 1.84 | 110.9 | 8.3 | [6] [7] | |||
B_L125 V6 N22 (1) P8 2S | 48 | 2.18 | 130.8 | 8.3 | [3] [5] | |||
B_L125 V8 N22 (1) P8 | 48.0 | 1.84 | 110.9 | 8.3 | [6] [7] | |||
B_L125 V8 N22 (1) P8 2S | 48 | 2.22 | 133.4 | 8.3 | [3] [5] | |||
B_L54 V6 (1) P8 | 22.4 | .73 | 44 | 8.3 | [6] [7] | |||
B_L54 V8 (1) P8 | 22.4 | .75 | 45 | 9 | [6] [7] | |||
B_L55 V6 N22 (1) P8 | 22.4 | .77 | 46.2 | 8.3 | [6] [7] | |||
B_L55 V8 N22 (1) P8 | 22.4 | .79 | 47.6 | 8.3 | [6] [7] | |||
B_L75 V6 N22 (1) P8 | 59.5x.99 | 59.4 | 8.3 | |||||
B_L75 V8 N22 (1) P8 | 29.5 | 1.03 | 62.1 | 8.3 | ||||
B_L95 V6 N22 (1) P8 | 38.6 | 1.45 | 87.1 | 8.3 | [6] [7] | |||
B_L95 V8 N22 (1) P8 | 38.6 | 1.45 | 87.1 | 8.3 | [6] [7] | |||
B_M124 V6 (1) P8 | 48 | 1.53 | 91.9 | 6 | [3] [5] | |||
B_M124 V8 (1) P8 | 48 | 1.55 | 92.9 | 6.5 | [3] [5] | |||
B_M125 V6 N22 (1) P8 | 48.0 | 1.84 | 110.9 | 6.0 | [6] [7] | |||
B_M125 V6 N22 (1) P8 2S | 48 | 2.07 | 124.2 | 6.0 | [3] [5] | |||
B_M125 V8 N22 (1) P8 | 48.0 | 1.84 | 110.9 | 6.0 | [6] [7] | |||
B_M125 V8 N22 (1) P8 2S | 48 | 2.09 | 125.5 | 6.0 | [3] [5] | |||
B_M54 V6 (1) P8 | 22.4 | .72 | 43 | 6 | [6] [7] | |||
B_M54 V8 (1) P8 | 22.4 | .73 | 44 | 6.5 | [6] [7] | |||
B_M55 V6 N22 (1) P8 | 22.4 | .73 | 43.6 | 6.0 | [6] [7] | |||
B_M55 V8 N22 (1) P8 | 22.4 | .73 | 43.6 | 6.0 | [6] [7] | |||
B_M75 V6 N22 (1) P8 | 29.5 | .95 | 56.8 | 6.0 | ||||
B_M75 V8 N22 (1) P8 | 29.5 | 95 | 56.8 | 6.0 | ||||
B_M95 V6 N22 (1) P8 | 38.6 | 1.45 | 87.1 | 6.0 | [6] [7] | |||
B_M95 V8 N22 (1) P8 | 38.6 | 1.45 | 87.1 | 6.0 | [6] [7] | |||
B_S124 (1) P8 | 48 | 1.55 | 92.9 | 4.5 | [3] [5] | |||
B_S125 N02(1) P8 | 48.0 | 1.84 | 110.9 | 4.5 | [6] [7] | |||
B_S125 N02(1) P8 2S | 48 | 2.07 | 124.2 | 4.5 | [3] [5] | |||
B_S54 (1) P8 | 22.4 | .73 | 44 | 4.5 | [6] [7] | |||
B_S55 N02(1) P8 | 22.4 | .77 | 46.2 | 4.5 | [6] [7] | |||
B_S75 N02(1) P8 | 29.5 | 1.01 | 60.7 | 4.5 | ||||
B_S95 N02(1) P8 | 38.6 | 1.45 | 87.1 | 4.5 | [6] [7] | |||
B_XL124 V6 (1) P8 | 48 | 1.6 | 96.1 | 9 | [3] [5] | |||
B_XL124 V8 (1) P8 | 48 | 1.6 | 96.1 | 9 | [3] [5] | |||
B_XL125 V6 N22 (1) P8 | 48.0 | 1.84 | 110.9 | 8.3 | [6] [7] | |||
B_XL125 V6 N22 (1) P8 2S | 48 | 2.31 | 138.7 | 8.3 | [3] [5] | |||
B_XL125 V8 N22 (1) P8 | 48.0 | 1.84 | 110.9 | 8.3 | [6] [7] | |||
B_XL125 V8 N22 (1) P8 2S | 48 | 2.33 | 140.0 | 8.3 | [3] [5] | |||
B_XL54 V6 (1) P8 | 22.4 | .75 | 45 | 9 | [6] [7] | |||
B_XL54 V8 (1) P8 | 22.4 | .75 | 45 | 9 | [6] [7] | |||
B_XL55 V6 N22 (1) P8 | 22.4 | .88 | 52.8 | 8.3 | [6] [7] | |||
B_XL55 V8 N22 (1) P8 | 22.4 | .88 | 52.8 | 8.3 | [6] [7] | |||
B_XL75 V6 N22 (1) P8 | 29.5 | 1.14 | 68.7 | 8.3 | ||||
B_XL75 V8 N22 (1) P8 | 29.5x1.14 | 68.7 | 8.3 | |||||
B_XL95 V6 N22 (1) P8 | 38.6 | 1.47 | 88.5 | 8.3 | [6] [7] | |||
B_XL95 V8 N22 (1) P8 | 38.6 | 1.49 | 89.8 | 8.3 | [6] [7] | |||
[3] Available with optional “Prewash 22” [4] Minimum peg spacing is 2.125 in. [5] Model numbers including "HA 2S" in the suffix indicate a semi-automated dishwashing machine especially for cutlery and trays. [6] (1) Optional neutral element indicated as follows: Model numbers including an "N" in the suffix indicate the option of one or two distance elements between prewash and wash tank and/or between wash tank and pumped final rinse. Nxy, where x - Length for element between prewash and wash y - Length for element between wash and pumped final rinse [7] The distance between pegs is 2.125. |
||||||||
Multiple Tank Rackless Conveyor Pot & Pan Washer-Hot Water Sanitizing-M-iQ Range |
||||||||
B-L75 B V6 N24 (1) P8 | 29.5 | 1.10 | 66.1 | 5.0 | [6] | |||
B-M75 B N04 (1) P8 | 29.5 | 1.15 | 68.7 | 5.0 | [6] | |||
B-M75 B V6 N24 (1) P8 | 29.5 | .94 | 56.3 | 4.0 | [6] | |||
B-S75 B N04 (1) P8 | 29.5 | 1.23 | 74 | 2.15 | [6] | |||
B_L125 B V6 N24 (1) P8 | 48.0 | 1.85 | 111.0 | 5.0 | [6] [7] | |||
B_L125 B V8 N24 (1) P8 | 48.0 | 1.85 | 111.0 | 5.0 | [6] [7] | |||
B_L55 B V6 N24 (1) P8 | 22.4 | .84 | 50.2 | 5.0 | [6] [7] | |||
B_L55 B V8 N24 (1) P8 | 22.4 | .84 | 50.2 | 5.0 | [6] [7] | |||
B_L75 B V8 N24 (1) P8 | 29.5 | 1.10 | 66.1 | 5.0 | [6] [7] | |||
B_L95 B V6 N24 (1) P8 | 38.6 | 1.45 | 87.2 | 5.0 | [6] [7] | |||
B_L95 B V8 N24 (1) P8 | 38.6 | 1.45 | 87.2 | 5.0 | [6] [7] | |||
B_M125 B N04 (1) P8 | 48.0 | 1.85 | 111.0 | 5.0 | [6] [7] | |||
B_M125 B V6 N24 (1) P8 | 48.0 | 1.85 | 111.0 | 4.0 | [6] [7] | |||
B_M125 B V8 N24 (1) P8 | 48.0 | 1.85 | 111.0 | 4.0 | [6] [7] | |||
B_M55 B N04 (1) P8 | 22.4 | .87 | 52.1 | 5.0 | [6] [7] | |||
B_M55 B V6 N24 (1) P8 | 22.4 | .73 | 43.6 | 4.0 | [6] [7] | |||
B_M55 B V8 N24 (1) P8 | 22.4 | .73 | 43.6 | 4.0 | [6] [7] | |||
B_M75 B V8 N24 (1) P8 | 29.5 | .94 | 56.3 | 4.0 | [6] [7] | |||
B_M95 B N04 (1) P8 | 38.6 | 1.49 | 89.5 | 5.0 | [6] [7] | |||
B_M95 B V6 N24 (1) P8 | 38.6 | 1.45 | 87.2 | 4.0 | [6] [7] | |||
B_M95 B V8 N24 (1) P8 | 38.6 | 1.45 | 87.2 | 4.0 | [6] [7] | |||
B_S125 B N04 (1) P8 | 48.0 | 1.86 | 111.3 | 2.15 | [6] [7] | |||
B_S55 B N04 (1) P8 | 22.4 | .87 | 52 | 2.15 | [6] [7] | |||
B_S95 B N04 (1) P8 | 38.6 | 1.49 | 89.4 | 2.15 | [6] [7] | |||
B_XL125 B V6 N24 (1) P8 | 48.0 | 1.85 | 111.0 | 5.0 | [6] [7] | |||
B_XL125 B V8 N24 (1) P8 | 48.0 | 1.85 | 111.0 | 5.0 | [6] [7] | |||
B_XL55 B V6 N24 (1) P8 | 22.4 | .88 | 52.8 | 5.0 | [6] [7] | |||
B_XL55 B V8 N24 (1) P8 | 22.4 | .88 | 52.8 | 5.0 | [6] [7] | |||
B_XL75 B V6 N24 (1) P8 | 29.5 | 1.15 | 68.7 | 5.0 | [6] [7] | |||
B_XL75 B V8 N24 (1) P8 | 29.5 | 1.15 | 68.7 | 5.0 | [6] [7] | |||
B_XL95 B V6 N24 (1) P8 | 38.6 | 1.45 | 87.2 | 5.0 | [6] [7] | |||
B_XL95 B V8 N24 (1) P8 | 38.6 | 1.45 | 87.2 | 5.0 | [6] [7] | |||
[6] (1) Optional neutral element indicated as follows: Model numbers including an "N" in the suffix indicate the option of one or two distance elements between prewash and wash tank and/or between wash tank and pumped final rinse. Nxy, where x - Length for element between prewash and wash y - Length for element between wash and pumped final rinse [7] The distance between pegs is 2.125. |
||||||||
Single Tank Rack Conveyor - Hot Water Sanitizing |
||||||||
K-80E | 20x20 | 1.7 | 102 | 6.64 | [8] [9] [10] | |||
KA-44 | 20x20 | 1.18 | 71 | 6.75 | ||||
KA-54 | 20x20 | 1.18 | 71 | 6.75 | ||||
KA-66 | 20x20 | 1.18 | 71 | 6.75 | [3] | |||
KA-76 | 20x20 | 1.18 | 71 | 6.75 | [3] | |||
KA-80 | 20x20 | 1.18 | 71 | 6.75 | [2] | |||
KA-90 | 20x20 | 1.18 | 71 | 6.75 | [2] | |||
[2] Available with optional “Prewash 36” [3] Available with optional “Prewash 22” [8] Model numbers indicate length of machine. [9] Model numbers including an "E" in the suffix indicate electric tank heat. Model numbers including an "S" in the suffix indicate steam coil tank heat. Model numbers including a "T" in the suffix indicate a tall hood. [10] Unit includes 36" recirculated prewash section. |
CONVEYOR POT, PAN, AND UTENSIL WASHING MACHINES
Final Rinse | ||||||||
(20 psi) | Conveyor Speed | |||||||
Model | Conveyor | Flow | Usage | (Max.) | Footnotes | |||
Number | Width | gpm | gph | (ft/min.) | ||||
Multiple Tank Rackless Conveyor Pot & Pan Washer-Hot Water Sanitizing-M-iQ Range |
||||||||
B-L75 B V6 N24 (1) P8 | 29.5 | 1.10 | 66.1 | 5.0 | [2] | |||
B-M75 B N04 (1) P8 | 29.5 | 1.15 | 68.7 | 5.0 | [2] | |||
B_S55 B N04 (1) P8 | 22.4 | 0.87 | 52 | 2.15 | [1] [2] | |||
B_M55 B V8 N24 (1) P8 | 22.4 | 0.73 | 46.6 | 4.0 | [1] [2] | |||
B_L55 B V6 N24 (1) P8 | 22.4 | 0.84 | 50.2 | 5.0 | [1] [2] | |||
B_L55 B V8 N24 (1) P8 | 22.4 | 0.84 | 50.2 | 5.0 | [1] [2] | |||
B_XL55 B V8 N24 (1) P8 | 22.4 | 0.88 | 52.8 | 5.0 | [1] [2] | |||
B_L75 B V8 N24 (1) P8 | 29.5 | 1.10 | 66.1 | 5.0 | [1] [2] | |||
B_XL75 B V6 N24 (1) P8 | 29.5 | 1.15 | 68.7 | 5.0 | [1] [2] | |||
B_S95 B N04 (1) P8 | 38.6 | 1.49 | 89.4 | 2.15 | [1] [2] | |||
B_M95 B V8 N24 (1) P8 | 38.6 | 1.45 | 87.2 | 4.0 | [1] [2] | |||
B_L95 B V6 N24 (1) P8 | 38.6 | 1.45 | 87.2 | 5.0 | [1] [2] | |||
B_L95 B V8 N24 (1) P8 | 38.6 | 1.45 | 87.2 | 5.0 | [1] [2] | |||
B_XL95 B V8 N24 (1) P8 | 38.6 | 1.45 | 87.2 | 5.0 | [1] [2] | |||
B-M75 B V6 N24 (1) P8 | 29.5 | 0.94 | 56.3 | 4.0 | [2] | |||
B-S75 B N04 (1) P8 | 29.5 | 1.23 | 74 | 2.15 | [2] | |||
B_M55 B V6 N24 (1) P8 | 22.4 | 0.73 | 43.6 | 4.0 | [1] [2] | |||
B_M55 B N04 (1) P8 | 22.4 | 0.87 | 52.1 | 5.0 | [1] [2] | |||
B_XL55 B V6 N24 (1) P8 | 22.4 | 0.88 | 52.8 | 5.0 | [1] [2] | |||
B_M75 B V8 N24 (1) P8 | 29.5 | 0.94 | 56.3 | 4.0 | [1] [2] | |||
B_XL75 B V8 N24 (1) P8 | 29.5 | 1.15 | 68.7 | 5.0 | [1] [2] | |||
B_M95 B V6 N24 (1) P8 | 38.6 | 1.45 | 87.2 | 4.0 | [1] [2] | |||
B_M95 B N04 (1) P8 | 38.6 | 1.49 | 89.5 | 5.0 | [1] [2] | |||
B_S125 B N04 (1) P8 | 48.0 | 1.86 | 111.3 | 2.15 | [1] [2] | |||
B_M125 B V8 N24 (1) P8 | 48.0 | 1.85 | 111.0 | 4.0 | [1] [2] | |||
B_L125 B V6 N24 (1) P8 | 48.0 | 1.85 | 111.0 | 5.0 | [1] [2] | |||
B_XL95 B V6 N24 (1) P8 | 38.6 | 1.45 | 87.2 | 5.0 | [1] [2] | |||
B_XL125 B V8 N24 (1) P8 | 48.0 | 1.85 | 111.0 | 5.0 | [1] [2] | |||
B_M125 B V6 N24 (1) P8 | 48.0 | 1.85 | 111.0 | 4.0 | [1] [2] | |||
B_M125 B N04 (1) P8 | 48.0 | 1.85 | 111.0 | 5.0 | [1] [2] | |||
B_L125 B V8 N24 (1) P8 | 48.0 | 1.85 | 111.0 | 5.0 | [1] [2] | |||
B_XL125 B V6 N24 (1) P8 | 48.0 | 1.85 | 111.0 | 5.0 | [1] [2] | |||
[1] The distance between pegs is 2.125. [2] (1) Optional neutral element indicated as follows: Model numbers including an "N" in the suffix indicate the option of one or two distance elements between prewash and wash tank and/or between wash tank and pumped final rinse. Nxy, where x - Length for element between prewash and wash y - Length for element between wash and pumped final rinse |
STATIONARY RACK DISHWASHING MACHINES
Final Rinse | ||||||||
(20 psi) | Operating Time | |||||||
Model | Rack Size | Flow | Usage | (seconds) | Footnotes | |||
Number | Width | gpm | gph | Wash | Rinse | Dwell | ||
Single Tank Door - Hot Water Sanitizing |
||||||||
M004DWHT10M1-20 | 20x20 | 1.3 | 41.4 | 40 | 8 | 11 | [1] | |
M004DWHT10M1-20 Heat Recovery | 20x20 | 1.3 | 28.1 | 40 | 8 | 41 | [1] | |
M004DWHT10M1-40 | 2*20x20 | N/A | 108.5 | 41 | 10 | 15 | [1] [2] | |
M002DWUC10M1-30 | 20x20 | 1.3 | 18.5 | 80 | 6 | 9 | [1] | |
M002DWUC10M1-20 | 20x20 | 1.3 | 18.5 | 80 | 6 | 9 | [1] | |
[1] Unit has pumped fresh water rinse. [2] Unit accepts two 20 x 20 racks per cycle. |
||||||||
Single Tank Stationary Rack - Hot Water Sanitizing[1] |
||||||||
M_iClean UM+ M2 ComfortAir | 500x500 | 5.71 | 11.07 | 81 | 8 | 126 | ||
M_iClean UM M2 | 500x500 | 6.77 | 17.08 | 80 | 6.6 | 8.4 | ||
M_iClean US M2 | 400x400 | 6.10 | 15.4 | 80.6 | 5.4 | 9 | ||
M007DWUC10M3-30 Heat Recovery | 500x500 | 5.71 | 11.07 | 81 | 8 | 126 | ||
M007DWUC10M3-20 Heat Recovery | 500x500 | 5.71 | 11.07 | 81 | 8 | 126 | ||
M007DWUC10M3-10 Heat Recovery | 400x400 | 5.55 | 8.54 | 82 | 7 | 126 | ||
M007DWUC10M3-30 | 500x500 | 6.77 | 17.08 | 80 | 6.6 | 8.4 | ||
M007DWUC10M3-20 | 500x500 | 6.77 | 17.08 | 80 | 6.6 | 8.4 | ||
M_iClean US M2 ComfortAir | 400x400 | 5.55 | 8.54 | 82 | 7 | 126 | ||
M_iClean UM M2 ComfortAir | 500x500 | 5.71 | 11.07 | 81 | 8 | 126 | ||
M_iClean UM+ M2 | 500x500 | 6.77 | 17.08 | 80 | 6.6 | 8.4 | ||
M007DWUC10M3-10 | 400x400 | 6.10 | 15.4 | 80.6 | 5.4 | 9 | ||
[1] Unit has pumped fresh water rinse. |
STATIONARY RACK POT, PAN, AND UTENSIL WASHING MACHINES
Final Rinse | ||||||||
(20 psi) | Operating Time | |||||||
Model | Rack Size | Flow | Usage | (seconds) | Footnotes | |||
Number | Width | gpm | gph | Wash | Rinse | Dwell | ||
Single Tank Stationary Rack - Hot Water Sanitizing |
||||||||
DV 270.2 | 51.6x27.2 | N/A | 37.6 | 204 | 10 | 26 | [1] | |
M006DWFL10M1-20 | 27.5x33.5 | N/A | 45.0 | 147 | 12 | 21 | [1] | |
FV 250.2 | 51.6x27.6 | N/A | 33.3 | 204 | 10 | 26 | [1] | |
[1] Unit has pumped fresh water rinse. |
Miele | |
9 Independence Way | |
Princeton, NJ 08540 | |
United States | |
800-991-9380 | |
800-991-9380 | |
Visit this company's website |
Facility : Bielefeld, Germany
STATIONARY RACK DISHWASHING MACHINES
Final Rinse | ||||||||
(20 psi) | Operating Time | |||||||
Model | Rack Size | Flow | Usage | (seconds) | Footnotes | |||
Number | Width | gpm | gph | Wash | Rinse | Dwell | ||
Hot Water, Single Tank, Stationary Rack |
||||||||
PFD408 | 20x20 | .27 | 16.1 | 359 | 676 | 270 | [1] | |
PFD408 | 20x20 | .46 | 27.78 | 640 | 692 | 282 | [2] | |
PFD408 | 20x20 | .35 | 21.34 | 486 | 677 | 263 | [3] | |
[1] Parameters when short cycle selected. [2] Parameters when intensive cycle selected. [3] Parameters when universal cycle selected. |
Moyer Diebel Limited | |
2674 North Service Road | |
Jordan Station, ON L0R 1S0 | |
Canada | |
905-562-4195 |
Facility : Jordan Station, Ontario, Canada
GLASSWASHING MACHINES
"DF" Glasswasher[1] [2] |
|
DF | |
DF-1 | |
DF-2 | |
[1] With suffix CW or CCW. [2] May have suffix M followed by number 1 - 99. |
|
"DF(L)" Glasswasher[1] [2] |
|
DF(L) | |
DF(L)-1 | |
DF(L)-2 | |
[1] With suffix CW or CCW. [2] May have suffix M followed by number 1 - 99. |
|
"SW" Glasswasher[2] |
|
SW-400L | |
SW-400R | |
SW-600L | |
SW-600R | |
[2] May have suffix M followed by number 1 - 99. |
|
"SW(L)" Glasswasher[2] |
|
SW(L)-400L | |
SW(L)-400R | |
SW(L)-600L | |
SW(L)-600R | |
[2] May have suffix M followed by number 1 - 99. |
STATIONARY RACK DISHWASHING MACHINES
Final Rinse | ||||||||
(20 psi) | Operating Time | |||||||
Model | Rack Size | Flow | Usage | (seconds) | Footnotes | |||
Number | Width | gpm | gph | Wash | Rinse | Dwell | ||
Nexus Single Tank, Hot Water, Undercounter Dishwasher[1] [2] |
||||||||
N900 | 20x20 | N/A | 28 | 85 | 20 | 45 | ||
[1] May have suffix M followed by number 1 - 99. [2] May have suffix "-70". |
||||||||
Single Tank, Chemical Sanitizing Undercounter Dishwasher[1] |
||||||||
201LT | 20x20 | 4.2 | 32 | 90 | 25 | 27 | ||
501LT | 20x20 | 4.2 | 32 | 90 | 25 | 27 | ||
601LTG | 20x20 | 4.2 | 32 | 90 | 25 | 27 | ||
[1] May have suffix M followed by number 1 - 99. |
||||||||
Single Tank, Hot Water, Undercounter Dishwasher[1] [2] |
||||||||
201HT | 20x20 | N/A | 36.6 | 90 | 25 | 27 | ||
351HT | 20x20 | N/A | 20.14 | 100 | 15 | 5 | ||
383HT | 20x20 | N/A | 20.14 | 100 | 15 | 5 | ||
401HT | 20x20 | N/A | 36.6 | 90 | 25 | 27 | ||
501HT | 20x20 | N/A | 36.6 | 90 | 25 | 27 | ||
501HTN | 20x20 | 3.6 | 38 | 80 | 23 | 37 | [3] | |
601HR | 20x20 | N/A | 15.2 | 70 | 20 | 60 | ||
601HRG | 20x20 | N/A | 15.6 | 45 | 13 | 62 | ||
601HT | 20x20 | N/A | 24 | 70 | 14 | 6 | ||
601HTG | 20x20 | N/A | 24 | 70 | 14 | 6 | ||
[1] May have suffix M followed by number 1 - 99. [2] May have suffix "-70". [3] With or without suffix (LC) indicating extended wash time: 140 seconds, 27 gph usage. |
||||||||
Stationary Rack Pot, Pan, and Utensil Washing Machines[1] [2] |
||||||||
601HR | 20x20 | N/A | 8.1 | 197 | 20 | 60 | ||
[1] May have suffix M followed by number 1 - 99. [2] May have suffix "-70". |
NOTE: All machines Listed leg mounted or on pedestal base.
Moyer Diebel Limited | |
2674 North Service Road | |
Jordan Station, ON L0R1S0 | |
Canada | |
905-562-4195 |
Facility : Winston-Salem, NC
CONVEYOR DISHWASHING MACHINES
Final Rinse | ||||||||
(20 psi) | Conveyor Speed | |||||||
Model | Conveyor | Flow | Usage | (Max.) | Footnotes | |||
Number | Width | gpm | gph | (ft/min.) | ||||
Single Tank Rack Conveyor, Hot Water Sanitizing[1] |
||||||||
MD44 | 20x20 | 2.17 | 130 | 6.1 | ||||
MD66 | 20x20 | 2.17 | 130 | 6.1 | ||||
[1] Unit may be equipped with an optional integral booster. This booster should be sized to supply the required heat rise to provide the proper final rinse operating temperature of 180°F to 195°F. |
STATIONARY RACK DISHWASHING MACHINES
Final Rinse | ||||||||
(20 psi) | Operating Time | |||||||
Model | Rack Size | Flow | Usage | (seconds) | Footnotes | |||
Number | Width | gpm | gph | Wash | Rinse | Dwell | ||
Single Tank Door, Hot Water Sanitizing |
||||||||
MD2000 | 20x20 | 4.4 | 49.5 | 40 | 12 | 8 | [1] [2] | |
MDHH | 20x20 | 5.4 | 44.4 | 44 | 10 | 14 | [1] [2] [3] [4] | |
MDHHB | 20x20 | 5.4 | 44.4 | 44 | 10 | 14 | [1] [2] [4] [5] | |
MDHHD | 20x20 | 5.1 | 46.8 | 35 | 10 | 15 | [1] [6] [7] [8] [9] | |
[1] Also available for corner placement. [2] Total water consumption 0.9 gallons/cycle. [3] Machine to be connected to customer supplied 180°F water for final rinse. [4] This unit has been tested and Certified as a combination Dishwashing/Pot, Pan & Utensil Washing Machine. Please reference this model's Listing under Stationary Rack Pot, Pan and Utensil Washing Machines for this model's specifications for that mode of operation. [5] Machine with built in booster heater. [6] Unit may be equipped with an optional integral booster. This booster should be sized to provide the proper final rinse operating temperature of 180°F to 195°F. [7] Unit may be equipped with an optional direct vent system. [8] Unit may be equipped with an optional condensate removal system. [9] Total water consumption 0.85 gallons/cycle. |
STATIONARY RACK POT, PAN, AND UTENSIL WASHING MACHINES
Final Rinse | ||||||||
(20 psi) | Operating Time | |||||||
Model | Rack Size | Flow | Usage | (seconds) | Footnotes | |||
Number | Width | gpm | gph | Wash | Rinse | Dwell | ||
Single Tank Stationary Rack, Hot Water Sanitizing |
||||||||
MDHH | 20x20 | 6.2 | 25.5 | 156 | 13 | 11 | [1] [2] [3] [4] | |
MDHHB | 20x20 | 6.2 | 25.5 | 156 | 13 | 11 | [1] [2] [4] [5] | |
MDHHD | 20x20 | 4.7 | 16.5 | 210 | 15 | 13 | [1] [2] [5] [6] | |
[1] This unit has been tested and Certified as a combination Dishwashing/Pot, Pan & Utensil Washing Machine. Please reference this model's Listing under Stationary Rack Dishwashing Machines for this model's specifications for that mode of operation. [2] Also available for corner placement. [3] Machine to be connected to customer supplied 180° F water for final rinse. [4] Total water consumption 1.34 gallons/cycle. [5] Machine with built in booster heater. [6] Total water consumption 1.18 gallons/cycle. |
Noble Chemical, Inc. | |
2205 Old Philadelphia Pike | |
Lancaster, PA 17602 | |
United States | |
888-256-6400 | |
717-291-9700 | |
Visit this company's website |
Facility : Barbourville, KY
CONVEYOR DISHWASHING MACHINES
Final Rinse | ||||||||
(20 psi) | Conveyor Speed | |||||||
Model | Conveyor | Flow | Usage | (Max.) | Footnotes | |||
Number | Width | gpm | gph | (ft/min.) | ||||
Single Tank Rack Conveyor - Hot Water Sanitizing[1] |
||||||||
WareForce 44H | 20x20 | 2.6 | 154.3 | 6.2 | [2] [3] | |||
WareForce 66H | 20x20 | 2.6 | 154.3 | 6.2 | [2] [3] [4] | |||
WareForce RS44 | 20x20 | 1.95 | 117 | 6.41 | [6] | |||
WareForce RS44 | 20x20 | 1.16 | 69.8 | 6.41 | [5] | |||
WareForce RS44S | 20x20 | 1.16 | 69.8 | 6.41 | [5] | |||
WareForce RS44S | 20x20 | 1.95 | 117 | 6.41 | [6] | |||
WareForce RS66 | 20x20 | 2.54 | 152.4 | 6.1 | [6] | |||
WareForce RS66 | 20x20 | 1.18 | 70.74 | 6.1 | [5] | |||
WareForce RS66S | 20x20 | 1.18 | 70.74 | 6.1 | [5] | |||
WareForce RS66S | 20x20 | 2.54 | 152.4 | 6.1 | [6] | |||
[1] Unit may be equipped with modular heat recovery/vapor removal system that is connected on both the load and unload ends of the unit. Modules may use existing installation ventilation system to move vapor or may be equipped with ventilation fans to move air as required. [2] Units produced after February 15, 2007 may be dual temperature convertible models. [3] Final rinse flow and usage are based on a 15 PSI flow pressure. [4] With recirculated prewash. Prewash temperature 110° - 140°F is obtained from wash tank overflow and fresh water supply. [5] Model designation may have suffix S for steam heated and/or suffix C for a CREW style rack conveyor machine. [6] Units may come equipped with additional rinse arms for use in "Turbo" rinse mode, which results greater water consumption. This is not a post sanitizing rinse. |
||||||||
COMPONENTS: |
||||||||
Single Tank Rack Conveyor - Chemical Sanitizing[1] |
||||||||
AJ-44 | 20x20 | 3.9 | 234 | 6.5 | [2] [7] [8] | |||
AJ-66 | 20x20 | 3.9 | 234 | 6.5 | [2] [4] [7] [8] | |||
AJ-80 | 20x20 | 3.9 | 234 | 6.9 | [2] [4] [7] [8] | |||
AJX-44 | 20x20 | 2.7 | 164.4 | 5.8 | [2] [3] [8] [9] | |||
AJX-54 | 20x20 | 2.6 | 154.3 | 6.2 | [2] [3] [9] | |||
AJX-66 | 20x20 | 2.7 | 164.4 | 5.8 | [3] [4] [8] [9] | |||
AJX-76 | 20x20 | 2.6 | 154.3 | 6.2 | [2] [3] [4] [8] [9] | |||
AJX-80 | 20x20 | 2.7 | 164.4 | 5.8 | [2] [3] [4] [8] [9] | |||
AJX-90 | 20x20 | 2.6 | 154.3 | 6.2 | [2] [3] [4] [8] [9] | |||
CON44 | 20x20 | 1.16 | 69.8 | 6.41 | [5] | |||
CON66 | 20x20 | 1.18 | 70.74 | 6.1 | [5] | |||
CON80 | 20x20 | 1.18 | 70.74 | 6.1 | [2] [3] [4] [8] [9] | |||
CREW 44 | 20x20 | 1.16 | 69.8 | 6.41 | [5] | |||
CREW 44S | 20x20 | 1.16 | 69.8 | 6.41 | [5] | |||
CREW 66 | 20x20 | 1.18 | 70.74 | 6.1 | [5] | |||
CREW 66S | 20x20 | 1.18 | 70.74 | 6.1 | [5] | |||
CREW 80 | 20x20 | 1.18 | 70.74 | 6.1 | [5] | |||
CREW 80S | 20x20 | 1.18 | 70.74 | 6.1 | [5] | |||
RackStar 44 | 20x20 | 1.95 | 117 | 6.41 | [6] | |||
RackStar 44 | 20x20 | 1.16 | 69.8 | 6.41 | [5] | |||
RackStar 44S | 20x20 | 1.95 | 117 | 6.41 | [6] | |||
RackStar 44S | 20x20 | 1.16 | 69.8 | 6.41 | [5] | |||
RackStar 66 | 20x20 | 2.54 | 152.4 | 6.1 | [6] | |||
RackStar 66 | 20x20 | 1.18 | 70.74 | 6.1 | [5] | |||
RackStar 66S | 20x20 | 1.18 | 70.74 | 6.1 | [5] | |||
RackStar 66S | 20x20 | 2.54 | 152.4 | 6.1 | [6] | |||
WareForce 44L | 20x20 | 2.7 | 164.4 | 5.8 | [2] [8] | |||
WareForce 66L | 20x20 | 2.7 | 164.4 | 5.8 | [2] [3] [4] [8] | |||
WareForce C44 | 20x20 | 1.16 | 69.8 | 6.41 | [5] | |||
WareForce C44S | 20x20 | 1.16 | 69.8 | 6.41 | [5] | |||
WareForce C66 | 20x20 | 1.18 | 70.74 | 6.1 | [5] | |||
WareForce C66S | 20x20 | 1.18 | 70.74 | 6.1 | [5] | |||
WareForce C80 | 20x20 | 1.18 | 70.74 | 6.1 | [5] | |||
WareForce C80S | 20x20 | 1.18 | 70.74 | 6.1 | [5] | |||
WareForce RS44 | 20x20 | 1.16 | 69.8 | 6.41 | [5] | |||
WareForce RS44 | 20x20 | 1.95 | 117 | 6.41 | [6] | |||
WareForce RS44S | 20x20 | 1.95 | 117 | 6.41 | [6] | |||
WareForce RS44S | 20x20 | 1.16 | 69.8 | 6.41 | [5] | |||
WareForce RS66 | 20x20 | 1.18 | 70.74 | 6.1 | [5] | |||
WareForce RS66 | 20x20 | 2.54 | 152.4 | 6.1 | [6] | |||
WareForce RS66S | 20x20 | 2.54 | 152.4 | 6.1 | [6] | |||
WareForce RS66S | 20x20 | 1.18 | 70.74 | 6.1 | [5] | |||
[1] Unit may be equipped with modular heat recovery/vapor removal system that is connected on both the load and unload ends of the unit. Modules may use existing installation ventilation system to move vapor or may be equipped with ventilation fans to move air as required. [2] Units produced after February 15, 2007 may be dual temperature convertible models. [3] Final rinse flow and usage are based on a 15 PSI flow pressure. [4] With recirculated prewash. Prewash temperature 110° - 140°F is obtained from wash tank overflow and fresh water supply. [5] Model designation may have suffix S for steam heated and/or suffix C for a CREW style rack conveyor machine. [6] Units may come equipped with additional rinse arms for use in "Turbo" rinse mode, which results greater water consumption. This is not a post sanitizing rinse. [7] Model designation may have suffix CEL for electrically heated or CSL for steam heated. [8] Nonrecirculated, fresh water, final rinse, 50 ppm available chlorine. [9] Model designation may have suffix CE for electrically heated, CG for gas heated, or S for steam heated. |
GLASSWASHING MACHINES
Chemical Sanitizing Conveyor Glasswasher |
|
WareForce CG-115 | |
WareForce CG1200 |
STATIONARY RACK DISHWASHING MACHINES
Final Rinse | ||||||||
(20 psi) | Operating Time | |||||||
Model | Rack Size | Flow | Usage | (seconds) | Footnotes | |||
Number | Width | gpm | gph | Wash | Rinse | Dwell | ||
Single Tank Door - Chemical Sanitizing |
||||||||
WareForce 1 HH | 20x20 | N/A | 62.8 | 43 | 25 | 18 | ||
WareForce 1-E | 20x20 | N/A | 40.2 | 42 | 25 | 20 | [1] [2] [3] | |
WareForce DG | 20x20 | N/A | 36 | 43 | 24 | 18 | ||
WareForce I | 20x20 | N/A | 40.2 | 42 | 25 | 20 | [1] [2] [3] | |
WareForce I-X | 20x20 | N/A | 40.2 | 42 | 25 | 20 | [1] [2] [3] | |
WareForce II | 2(20x20) | 11.9 | 91.26 | 53 | 14 | 20 | [3] [4] [5] [6] [7] [8] [9] | |
WareForce II-C | 2(20x20) | 11.9 | 86.6 | 53 | 14 | 28 | [4] [5] [6] [7] [8] [9] | |
[1] Recirculated pumped rinse, minimum 50 ppm available chlorine. [2] Models may have ability for multiple cylcle times: 90 seconds, 2 minutes or 6 minutes. [3] Model has the option of an available detergent dispenser. [4] Accepted only with Jackson chemical feeders, peristaltic pump or pinch valve. [5] Single tank machine utilizing two racks per complete operating cycle. [6] Pumped rinse, minimum 50 ppm available chlorine, minimum 120°F. [7] Unit equipped with a multiple setting time delay feature to extend wash times. Maximum wash time time delays are 5 minutes. [8] Suffix CML or CMR may appear. CML indicates corner machine left. CMR indicates corner machine right. [9] Dwell includes drain and fill cycles. |
||||||||
Single Tank Door - Hot Water Sanitizing |
||||||||
WareForce HT-180 | 20x20 | 4.1 | 51.6 | 40 | 13 | 4 | [10] [11] [12] | |
WareForce HT-180DT | 20x20 | 3.78 | 39.5 | 40 | 11 | 7 | [10] [12] [13] | |
WareForce HT-180DTN | 20x20 | 3.78 | 39.5 | 40 | 11 | 7 | [10] [12] [13] [15] | |
WareForce HT-180DTS | 20x20 | 3.78 | 39.5 | 40 | 11 | 7 | [10] [12] [13] [16] | |
WareForce HT-180HH | 20x20 | 5.46 | 72 | 45 | 15 | 2 | [10] [11] [12] [14] | |
[10] Non-recirculated fresh water final rinse. [11] Model designation may have suffix /NB to indicate that the unit does not come with an integral booster and must be supplied with a minimum 180°F fresh water hook-up or GP or GPX to indicate gas heated model. Gas heated machines have a single-source gas booster which maintains the appropriate wash tank temperature. Models without a suffix come with an integral booster for a minimum 40°F rinse temperature rise. [12] Unit may be equipped with optional condensate removal system. [13] Final rinse pressure of 8-12PSI . [14] Unit equipped with a multiple setting time delay feature to extend wash times. Maximum wash time delays are 5 minutes. [15] Suffix N indicates unit not supplied with booster heater and must be supplied with 180° water supply. [16] Steam heated model . |
||||||||
COMPONENTS: |
||||||||
Single Tank Door - Chemical Sanitizing |
||||||||
WareForce UL30 | 20x20 | 6.6 | 28.8 | 56 | 35 | 26 | [9] | |
[9] Dwell includes drain and fill cycles. |
Perlick Corporation | |
8300 West Good Hope Road | |
Milwaukee, WI 53223 | |
United States | |
414-353-7060 |
Facility : Garden Grove, CA
GLASSWASHING MACHINES
Glasswashing Machines |
|
PKD24A | |
PKHT24 |
STATIONARY RACK DISHWASHING MACHINES
Final Rinse | ||||||||
(20 psi) | Operating Time | |||||||
Model | Rack Size | Flow | Usage | (seconds) | Footnotes | |||
Number | Width | gpm | gph | Wash | Rinse | Dwell | ||
Single Tank Stationary Rack, Chemical Sanitizing[1] [2] [3] [4] |
||||||||
PKD24B | 20x20 | 35 | 40.8 | 57 | 45 | 18 | ||
[1] Recirculated pumped rinse minimum 50 ppm available Chlorine or 12.5 ppm iodophor. [2] Suffixes apply to all models: T - Top mount controls; I - Integral scrap trap [3] 1.25 gallons per complete cycle includes .25 gal. fresh water flush. [4] Available with suffix B- Built-on 12KW booster heater for 40°F rise. |
Stero Co. (The) | |
1758 Corporate Circle | |
Petaluma, CA 94954 | |
United States | |
800-762-7600 | |
707-762-0071 | |
Visit this company's website |
Facility : Lancaster, PA
CONVEYOR DISHWASHING MACHINES
Final Rinse | ||||||||
(20 psi) | Conveyor Speed | |||||||
Model | Conveyor | Flow | Usage | (Max.) | Footnotes | |||
Number | Width | gpm | gph | (ft/min.) | ||||
Multiple Tank Conveyor, Hi-Temp |
||||||||
ER-64 | 20x20 | 2.01 | 120.6 | 7.45 | ||||
ER-86S | 20x20 | 2.01 | 120.6 | 7.45 | ||||
ER-94S | 20x20 | 2.01 | 120.6 | 7.45 | ||||
ER-94SC | 20x20 | 2.01 | 120.6 | 7.45 | ||||
SCT-108S | 20x20 | 4.53 | 272 | 8.6 | [1] | |||
SCT-108SC | 20x20 | 4.53 | 272 | 8.6 | [1] | |||
SCT-120S | 20x20 | 5.3 | 318 | 13 | [1] | |||
SCT-120SC | 20x20 | 5.3 | 318 | 13 | [1] | |||
SCT-76 | 20x20 | 4.53 | 272 | 8.6 | [1] | |||
[1] Suffix letters after the model number on standard models indicate: C - Corner models D - Built-in forced air dryers S - Power scrappers SPTC and STPCW models with suffix "PS" have built-in power scrappers. |
||||||||
Rackless Multiple Tank Conveyor, Hi-Temp[3] |
||||||||
Four Tank STPC-(1)-(2) | 3 | 3.8 | 228 | 17.3 | [4] | |||
Four Tank STPCW-(1)-(2) | 3.9 | 234 | 17.3 | [4] | ||||
Four Tank STPCW-ER-(1)-(2) | 1.7 | 102 | 14 | [4] | ||||
Three Tank STPC-(1)-(2) | 4.6 | 276 | 12 | [4] | ||||
Three Tank STPCW-(1)-(2) | 5.6 | 336 | 12 | [4] | ||||
Three Tank STPCW-ER-(1)-(2) | 0.972 | 58.3 | 9.2 | [4] [6] | ||||
Three Tank STPCW-ER-(1)-(2) | 1.6 | 98 | 9.2 | [4] | ||||
[3] The peg spacing for rackless conveyor dishwashers is 2.5" and 3.5" by request. [4] (1) 2-digit numerical suffix indicating the overall length of the equipment in feet and inches. The minimum length for the pre-wash tank is 32 inches and the minimum length for each wash/rinse tank is 44 inches. The overall length of the unit varies based on the number of tanks and the length of the loading & unloading sections. (2) Optional suffix D indicating built-in forced air dryers. [6] Models with serial number 79600 and higher. |
||||||||
Single Tank Conveyor Chemical Sanitizing[1] [2] [7] [8] [9] |
||||||||
SC-1-2-4-CSA | 20x20 | 4.84 | 250 | 3.8 | ||||
SC-1-2-4-CSA-LW | 20x20 | 2 | 120 | 2.3 | ||||
SC-1-6-4-CSA | 20x20 | 4.84 | 250 | 3.8 | ||||
SC-1-6-4-CSA-LW | 20x20 | 2 | 120 | 2.3 | ||||
SC-1-SCT-44-10-CSA | 20x20 | 4.84 | 250 | 4.3 | ||||
SC-1-SCT-44-CSA | 20x20 | 4.84 | 250 | 4.3 | ||||
SC-2-4-CSA | 20x20 | 4.84 | 250 | 3.8 | ||||
SC-2-4-CSA-LW | 20x20 | 2 | 120 | 2.3 | ||||
SC-5-2-4-CSA | 20x20 | 4.84 | 250 | 3.8 | ||||
SC-5-2-4-CSA-LW | 20x20 | 2 | 120 | 2.3 | ||||
SC-5-6-4-CSA | 20x20 | 4.84 | 250 | 5.9 | ||||
SC-5-6-4-CSA-LW | 20x20 | 2 | 120 | 3.5 | ||||
SC-6-4-CSA | 20x20 | 4.84 | 250 | 5.9 | ||||
SC-6-4-CSA-LW | 20x20 | 2 | 120 | 3.5 | ||||
[1] Suffix letters after the model number on standard models indicate: C - Corner models D - Built-in forced air dryers S - Power scrappers SPTC and STPCW models with suffix "PS" have built-in power scrappers. [2] Make-up water for wash tank is provided from final rinse source of supply. Sizing of water heaters should be based upon this additional demand (not to exceed 2 gpm. [7] Unit accepted only when installed with Economics Laboratory Chlorine Injector Model CM-47A, Ecotemp 111, Ecotemp 130A; DuBois Hydr-A-Trol Feeder Model LT-910-038; Rykoff Feeder Model LTD-1001-A; U.S. Chemical Feeder Model ITC-2; Lendew Co. Ltd. Model L-1000; Beta Technology Model D-3300, Model D-6300; Mec-O-Matic Model 7500 C; Knight Feeder Model LTD 300; or Stero Peristaltic Pump. [8] Available chlorine minimum, 50 ppm. Sanitizing agent feeder Beta Technology; PWM Model P-4000: or stero Peristaltic Pump. Additional suffix "8" indicates straight through chemical sanitizing final rinse section. Additional suffix "9" indicates 90° chemical sanitizing final rinse section. [9] Unit is tested and Certified as a dual sanitizing mode machine. The sanitizing mode is designed to be converted in the field by the manufacturer or its authorized service representative. |
||||||||
Single Tank Conveyor, Hi-Temp |
||||||||
ER-44 | 20x20 | 2.43 | 146 | 6.2 | [10] | |||
ER-44-10 | 20x20 | 2.43 | 146 | 6.2 | [10] | |||
ER-54 | 20x20 | 2.43 | 146 | 6.2 | [10] | |||
ER-66S | 20x20 | 2.43 | 146 | 6.2 | [10] | |||
ER-76S | 20x20 | 2.43 | 146 | 6.2 | [10] | |||
ER-76SC | 20x20 | 2.43 | 146 | 6.2 | [10] | |||
ER-90S | 20x20 | 2.43 | 146 | 6.2 | [10] | |||
SC-1-2-4 | 20x20 | 5.02 | 301 | 3.8 | [1] [2] [9] | |||
SC-1-2-4-LW | 20x20 | 2 | 120 | 2.3 | [1] [2] [9] | |||
SC-1-6-4 | 20x20 | 5.02 | 301 | 5.9 | [1] [2] [9] | |||
SC-1-6-4-LW | 20x20 | 2 | 120 | 3.5 | [1] [2] [9] | |||
SC-2-4 | 20x20 | 5.02 | 301 | 3.8 | [1] [2] [9] | |||
SC-2-4-LW | 20x20 | 2 | 120 | 2.3 | [1] [2] [9] | |||
SC-5-2-4 | 20x20 | 5.02 | 301 | 3.8 | [1] [2] [9] | |||
SC-5-2-4-LW | 20x20 | 2 | 120 | 2.3 | [1] [2] [9] | |||
SC-5-6-4 | 20x20 | 5.02 | 301 | 5.9 | [1] [2] [9] | |||
SC-5-6-4-LW | 20x20 | 2 | 120 | 3.5 | [1] [2] [9] | |||
SC-6-4 | 20x20 | 5.02 | 301 | 5.9 | [1] [9] | |||
SC-6-4-LW | 20x20 | 2 | 120 | 3.5 | [1] [2] [9] | |||
[1] Suffix letters after the model number on standard models indicate: C - Corner models D - Built-in forced air dryers S - Power scrappers SPTC and STPCW models with suffix "PS" have built-in power scrappers. [2] Make-up water for wash tank is provided from final rinse source of supply. Sizing of water heaters should be based upon this additional demand (not to exceed 2 gpm. [9] Unit is tested and Certified as a dual sanitizing mode machine. The sanitizing mode is designed to be converted in the field by the manufacturer or its authorized service representative. [10] Models with serial number 79200 and higher. |
[5] (1) 2-digit numerical suffix indicating the overall length of the equipment in feet and inches. The minimum length for the pre-wash tank is 24 inches and the minimum length for each wash/rinse tank is 36 inches. The overall length if the unit varies based on the number of tanks and the length of the loading and unloading sections. (2) Option suffix D indicating built-in forced air dryers.
CONVEYOR POT, PAN, AND UTENSIL WASHING MACHINES
Final Rinse | ||||||||
(20 psi) | Conveyor Speed | |||||||
Model | Conveyor | Flow | Usage | (Max.) | Footnotes | |||
Number | Width | gpm | gph | (ft/min.) | ||||
Multiple Tank Conveyor - Hot Water Sanitizing[1] [2] |
||||||||
STBUW | 27 | 7.5 | 447 | 10 | ||||
[1] Number following model designates length of unit. [2] Engineering data pertaining to rackless conveyor machines (Model STBUW-14) also apply to certain variations of these models for which National Sanitation Foundation Listing is authorized. Such variations are limited to providing of soiled utensil. The pump section(s), final rinse section, conveyor width and maximum conveyor speed must remain unchanged. |
STATIONARY RACK DISHWASHING MACHINES
Final Rinse | ||||||||
(20 psi) | Operating Time | |||||||
Model | Rack Size | Flow | Usage | (seconds) | Footnotes | |||
Number | Width | gpm | gph | Wash | Rinse | Dwell | ||
Single Tank Chemical Sanitizing Door (Dual Sanitizing Mode Machines) |
||||||||
SD3 | 20x20 | 4.4 | 47.4 | 38 | 10 | 2 | [1] [2] [3] [4] [5] [6] | |
SD3T | 20x20 | 4.4 | 47.4 | 38 | 10 | 2 | [1] [2] [3] [4] [5] [6] [7] | |
[1] Optional tabling and shelving fully complying with NSF Standard 2 may be provided. [2] Final rinse must contain 50 ppm minimum available chlorine. [3] Corner model is rated 40.8 gph for hot and 46 gph for chemical sanitizing. [4] Includes post-wash dwell (2 seconds). [5] This unit has been tested and Certified as a combination Dishwashing/Pot, Pan & Utensil Washing Machine. Please reference this model's Listing under Stationary Rack Pot, Pan and Utensil Washing Machines for this model's specifications for that mode of operation. [6] Available with power vent fan option. [7] Available with optional front loading kit rated with 33 gph for chemical sanitizing and 30 gph hot water sanitizing. |
||||||||
Single Tank Door (Dual Sanitizing Mode Machines) |
||||||||
SD3 | 20x20 | 4.4 | 42.3 | 38 | 10 | 9 | [1] [3] [5] [8] | |
SD3T | 20x20 | 4.4 | 42.3 | 38 | 10 | 9 | [1] [3] [5] [7] [8] | |
[1] Optional tabling and shelving fully complying with NSF Standard 2 may be provided. [3] Corner model is rated 40.8 gph for hot and 46 gph for chemical sanitizing. [5] This unit has been tested and Certified as a combination Dishwashing/Pot, Pan & Utensil Washing Machine. Please reference this model's Listing under Stationary Rack Pot, Pan and Utensil Washing Machines for this model's specifications for that mode of operation. [7] Available with optional front loading kit rated with 33 gph for chemical sanitizing and 30 gph hot water sanitizing. [8] Includes post-wash dwell (2 seconds) and post-rinse dwell (7 seconds). |
||||||||
Single Tank Stationary Rack, Hi-Temp |
||||||||
U-31-A | 24x28 | 11.2 | 70 | 120 | 15 | 0 | [9] [10] [11] | |
U-31-A2 | 24x28 | 22.4 | 140 | 120 | 15 | 0 | [9] [10] [11] | |
U-31-AC | 24x28 | 11.2 | 70 | 120 | 15 | 0 | [9] [10] [11] | |
[9] Suffix letters after the model number on standard models indicate: C - Corner models D - Built-in forced air dryers S - Power scrappers SPTC and STPCW models with suffix "PS" have built-in power scrappers. [10] Unit accepted with a minimum wash temperature of 155°F. [11] 24" x 28" rack frame required to accomodate a standard 20" x 20" rack. |
STATIONARY RACK POT, PAN, AND UTENSIL WASHING MACHINES
Final Rinse | ||||||||
(20 psi) | Operating Time | |||||||
Model | Rack Size | Flow | Usage | (seconds) | Footnotes | |||
Number | Width | gpm | gph | Wash | Rinse | Dwell | ||
Single Tank Chemical Sanitizing Door (Dual Sanitizing Mode Machines) |
||||||||
SD3 | 20x20 | 4.4 | 18.9 | 120 | 10 | 2 | [1] [2] [3] [4] [5] [6] | |
SD3T | 20x20 | 4.4 | 18.9 | 120 | 10 | 2 | [1] [2] [3] [4] [5] [6] [7] | |
[1] Optional tabling and shelving fully complying with NSF Standard 2 may be provided. [2] Corner model is rated 17.5 gph for hot and 18.2 gph for chemical sanitizing. [3] This unit has been tested and Certified as a combination Dishwashing/Pot, Pan & Utensil Washing Machine. Please reference this model's Listing under Stationary Rack Dishwashing Machines for this model's specifications for that mode of operation. [4] Includes post-wash dwell (2 seconds). [5] Final rinse must contain 50 ppm minimum available chlorine. [6] Available with power vent fan option. [7] Available with optional front loading kit rated with 16.1 gph for chemical sanitizing and 15.4 gph hot water sanitizing. |
||||||||
Single Tank Door (Dual Sanitizing Mode Machines) |
||||||||
SD3 | 20x20 | 4.4 | 18.2 | 120 | 10 | 9 | [1] [2] [3] [6] [8] | |
SD3T | 20x20 | 4.4 | 18.2 | 120 | 10 | 9 | [1] [2] [3] [6] [7] [8] | |
[1] Optional tabling and shelving fully complying with NSF Standard 2 may be provided. [2] Corner model is rated 17.5 gph for hot and 18.2 gph for chemical sanitizing. [3] This unit has been tested and Certified as a combination Dishwashing/Pot, Pan & Utensil Washing Machine. Please reference this model's Listing under Stationary Rack Dishwashing Machines for this model's specifications for that mode of operation. [6] Available with power vent fan option. [7] Available with optional front loading kit rated with 16.1 gph for chemical sanitizing and 15.4 gph hot water sanitizing. [8] Includes post-wash dwell (4 seconds) and post-rinse dwell (5 seconds). |
||||||||
Single Tank Stationary Rack - Hot Water Sanitizing |
||||||||
U-31-A | 24x28 | 11.2 | 70 | 120 | 15 | 0 | ||
U-31-A2 | 24x28 | 22.4 | 140 | 120 | 15 | 0 | ||
U-31-AC | 24x28 | 11.2 | 70 | 120 | 15 | 0 |
Stero Co. (The) | |
1758 Corporate Circle | |
Petaluma, CA 94954 | |
United States | |
707-762-0071 |
Facility : # 2 USA
STATIONARY RACK DISHWASHING MACHINES
Final Rinse | ||||||||
(20 psi) | Operating Time | |||||||
Model | Rack Size | Flow | Usage | (seconds) | Footnotes | |||
Number | Width | gpm | gph | Wash | Rinse | Dwell | ||
Single Tank Chemical Sanitizing Door |
||||||||
SG | 20x20 | N/A | 19.2 | 85 | 10 | 10 | [1] | |
[1] Optional tabling and shelving fully complying with NSF Std 2 may be provided. |
||||||||
Single Tank Chemical Sanitizing Door (Dual Sanitizing Mode Machines) |
||||||||
SD3 | 20x20 | 5.1 | 55.2 | 38 | 10 | 2 | [2] [3] | |
[2] Corner model is rated 47.6 gph for hot and 53.5 gph for chemical sanitizing. [3] Final rinse must contain 50 ppm minimum available chlorine. |
||||||||
Single Tank Door (Dual Sanitizing Mode Machines) |
||||||||
SD3 | 20x20 | 5.1 | 49.3 | 38 | 10 | 9 | [2] | |
[2] Corner model is rated 47.6 gph for hot and 53.5 gph for chemical sanitizing. |
||||||||
Single Tank Door, Chemical Sanitizing, Pumped Fresh Water Rinse[4] |
||||||||
SUL | 20x20 | N/A | 22 | 85 | 12 | 12 | ||
[4] Minimum 50 ppm available chlorine, minimum 120°F. |
||||||||
Single Tank Door, Hot Water Sanitizing, Pumped Fresh Water Rinse |
||||||||
SUH | 20x20 | N/A | 18.7 | 85 | 11 | 20 |
Facility : Lancaster, PA
STATIONARY RACK DISHWASHING MACHINES
Final Rinse | ||||||||
(20 psi) | Operating Time | |||||||
Model | Rack Size | Flow | Usage | (seconds) | Footnotes | |||
Number | Width | gpm | gph | Wash | Rinse | Dwell | ||
Single Tank Chemical Sanitizing Door (Dual Sanitizing Mode Machines) |
||||||||
SD3 | 20x20 | 5.1 | 55.2 | 38 | 10 | 2 | [1] [2] | |
[1] Corner model is rated 47.6 gph for hot and 53.5 gph for chemical sanitizing. [2] Final rinse must contain 50 ppm minimum available chlorine. |
||||||||
Single Tank Door (Dual Sanitizing Mode Machines) |
||||||||
SD3 | 20x20 | 5.1 | 49.3 | 38 | 10 | 2 | [1] | |
[1] Corner model is rated 47.6 gph for hot and 53.5 gph for chemical sanitizing. |
United Service Company | |
Division of Hayes-Ivy Manufacturing, Inc | |
Route 309 | |
P.O. Box 455 | |
New Tripoli, PA 18066 | |
United States | |
610-767-3865 | |
Visit this company's website |
Facility : New Tripoli, PA
DISHWASHING MACHINE COMPONENTS
Dishwasher Curtain - Dura-Guard[1] |
|
[1] Blue, natural, orange, or other color. |
Valu-Clean | |
P.O. Box 301 | |
Jordan Station, ON L0R 1S0 | |
Canada | |
905-562-4195 |
Facility : Jordan Station, Ontario, Canada
GLASSWASHING MACHINES
VC 4 | |
VC 6 | |
VCF[1] | |
[1] With suffix CW or CCW. |
STATIONARY RACK DISHWASHING MACHINES
Final Rinse | ||||||||
(20 psi) | Operating Time | |||||||
Model | Rack Size | Flow | Usage | (seconds) | Footnotes | |||
Number | Width | gpm | gph | Wash | Rinse | Dwell | ||
Single Tank, Chemical Sanitizing Undercounter Dishmachines |
||||||||
VC 18-1 | 16x16 | 2.0 | 60 | 50 | 23 | 17 | [1] [2] [3] | |
VC 18-2 | 16x16 | 2.0 | 60 | 50 | 23 | 17 | [1] [2] [3] | |
VC41LT | 20x20 | 35.7 | 80 | 23 | 37 | |||
VC51HT | 20x20 | N/A | 36.6 | 90 | 25 | 27 | ||
VC51LT | 20x20 | 0.5 | 32 | 90 | 25 | 27 | [4] | |
VC71HT | 20x20 | N/A | 28.2 | 70 | 15 | 5 | ||
[1] Units are also approved for use as glasswashers. [2] Recirculated pumped rinse minimum 50 ppm available chlorine. [3] Water demand is 2.0 gallons per cycle. [4] With or without suffix (LC) indicating extended wash time: 140 seconds, 27 gph usage. |
NOTE: All machines Listed leg mounted or on pedestal base.
Winterhalter Gastronom GmbH | |
Winterhalterstrasse 2-12 | |
88074 Meckenbeuren | |
Germany | |
49 754 20 | |
Visit this company's website |
Facility : Endingen, Germany
STATIONARY RACK DISHWASHING MACHINES
Final Rinse | ||||||||
(20 psi) | Operating Time | |||||||
Model | Rack Size | Flow | Usage | (seconds) | Footnotes | |||
Number | Width | gpm | gph | Wash | Rinse | Dwell | ||
Undercounter Hot Water Sanitizing Stationary Rack Dishwasher[1] |
||||||||
UC-L/N | 20x20 | 0.27 | 16.1 | 105 | 6 | 22 | ||
UC-M/N | 20x20 | 0.27 | 16.1 | 105 | 6 | 22 | ||
UC-S/N | 16x16 | 0.24 | 14.5 | 96 | 6 | 19 | ||
UC-XL/N | 20x20 | 0.27 | 16.1 | 105 | 6 | 22 | ||
[1] Only Program #2 is included in the NSF Certification. |
Facility : Meckenbeuren, Germany
STATIONARY RACK DISHWASHING MACHINES
Final Rinse | ||||||||
(20 psi) | Operating Time | |||||||
Model | Rack Size | Flow | Usage | (seconds) | Footnotes | |||
Number | Width | gpm | gph | Wash | Rinse | Dwell | ||
Hood type Hot Water Sanitizing Stationary Rack Dishwasher[1] |
||||||||
PT-L/N | 20x20 | 6.38 | 19 | 112 | 8 | 23 | ||
PT-M/N | 20x20 | 6.31 | 18.84 | 112 | 8 | 23 | ||
PT-XL/N | 20x20 | 6.31 | 18.84 | 112 | 8 | 23 | ||
[1] Only Program #2 is included in the NSF Certification. |
Number of matching Manufacturers is 30
Number of matching Products is 1188
Processing time was 1 seconds