NSF Product and Service Listings

[1] 0641W2 and 00645W3 are identical products bearing   different model numbers due to
    distribution need.  00681A3 and 00681A3DIX are identical products bearing different
    model numbers due to distribution need.

[1] Accepted for Food Zone Non-contact applications

[1] Accepted for Food Zone Non-contact applications

[8] Size of compartments or table or shelf

[18] The above trays are Listed for institutional use and are to be used with nonserrated
     knives. Servers and covered are acceptable when used with covered or uncovered food
     inserts. Exterior colors are Listed in the first position, interior colors are Listed in
     the second position.

[1] Not tested by NSF for efficacy at limiting the spread of bacteria.

[1] (1) Numeric code indicates length of probe.
    (2) Numeric code indicates clip style.

[1] May be used under special applications as low temperature holding
    thermometer with exterior mounted dial.

[2] (1) Carel or customer version:
        33 - Standard Carel version
        EV - Standard Carel IR33+ version
        xx - Any two alphanumeric characters for customer identification
    (2) Number of relays:
        C - Four relays: compressor, defrost, fan, and auxiliary
        F - Three relays: compressor, defrost, and fan
        M - Zero relay
        S - One relay: compressor
        Y - Two relays: compressor and defrost
    (3) Type of temperature probe input: 0 - NTC
    (4) Main voltage:
        0 - 12 V ac or 13-15 Vdc, class 2 supplied
        A - 115 V ac, model provided with transformer - not available for relay code C
        E - 230 V ac, model provided with transformer - not available for relay code C
        H - 115/230 V ac, model provided with switching power supply module - not 
            available for relay code M
        L - 24 V ac or 15-30 Vdc, class 2 supplied
    (5) Model option:
        A - Provided with auxiliary relay
        B - Option C and R
        C - Provided with time clock
        E - Option C and H
        F - Option C, H, and R
        G - Option A and H
        H - Provided with relay 2HP 
        I - Option H and R
        K - Option A, H, and R
        L - Option A and C
        M - Option A and R
        N - Standard
        O - Option A, C, and H
        P - Provided with relay 16 A
        Q - Option P and R
        R - Provided with infrared receiver
        S - Option C and P
        T - Option A, C, and R
        U - Option C, P, and R
        V - Option A and P
        W - Option A, C, H, and R
        X - Option A, P, and R
        Y - Option A, C, and P
        Z - Option A, C, P, and R
    (6) Kind of terminal blocks:
        0/A/C/E/G - Screw terminal blocks
        1         - Quick-connect tabs for relay outputs and plug-in terminal blocks 
                    for IN/OUT signals
        2/D/H     - Plug-in terminal blocks
        3         - Quick-connect tabs for relay outputs and screw terminal blocks 
                    for IN/OUT signals
        5         - Vertical screw terminal blocks
        6         - As 1, back mounting version
        7         - As 2, back mounting version
        8         - As 3, back mounting version
        B/F       - Screw terminal blocks for relay outputs and plug-in terminal 
                    blocks for IN/OUT signals
    (7) Personalization identifier: 0 - Standard, x - One alphanumeric character
    (8) Shipping packaging information:
        Blank - Single package
        1/3/5 - Multiple package
        1/5   - Multiple package
        K     - Kit package with accessories
[3] (1) Note: The first four characters 'PJEZ' represent the standard Carel version; 
        or may be 'PZXX' where 'XX' represents a two digit customer code for special 
        application software or aesthetical personalization; or may be 'PJYY' where 'YY' 
        represents any two alphanumeric characters for CAREL specific application
        software; or may be "PQXX" where "xx" represents any two alphanumeric characters 
        for customer identification for specific application software or aesthetical 
        personalization. ‘Aesthetical personalization’: includes graphics; the color of 
        the logo on the plastic frame, a different color plastic, different color LEDs or 
        similar changes. The PQxx contains sealed relays and is to be used in applications 
        with flammable refrigerants.
    (2) Numebr of relays, alpha or numeric character
    (3) Type of temperature probe input/version
        0 - NTC probe - buzzer alarm
        1 - NTC probe
        2 - NTC probe - HT range +40 - +150C - buzzer
        3 - NTC probe - HT range +40 - +150C
        8 - NTC probe - buzzer alarm - "SPLIT" version
        N - NTC probe - smaller "Compact" version
    (4) Model option: Zero for Standard or alpha or numeric character for electronic 
        and Bluetooth options
    (5) Voltage: alpha or numeric character for voltage
    (6) Connections type / serial interface: alpha or numeric character
    (7) Personalized identifier: any alpha or numeric character for alternate set point,
        color, etc.
    (8) Packaging: Blank -Standard Carel stand-alone packaging, K- Kit version for 
        multiple delivery, x - Any alpha numeric character indicating personalized 
        packaging.
[4] (1) 2-digit alphanumeric suffix indicating Carel standard version or customer version
        00 - Standard CAREL Power Compact
        01 - Standard CAREL Power Compact
        B1 - CAREL Battery Backup
        B2 - EASY BLAST CHILLER
        EV - Standard CAREL
        F3 - VCC
        Any two alphanumeric characters for customer identification
    (2) Model
        C - Four relays: compressor, defrost, fan, and auxiliary
        D - Driver for external SSR and 3 standard relays (2HP, 8A, 8A)
        F - Three relays: compressor, defrost, and fan
        H - Five relays: Compressor, defrost, fan, two auxiliary
    (3) Type of Probe Input
        0 - NTC probes
        8 - NTC: UL label
        9 - NTC: alternate UL label
    (4) Power Supply
        A - 115VAC (model S, Y, F)
        E - 230VAC (model S, Y, F)
        H - 115/230 VAC Switching (model F, C, H)
        S - 115/230VAC Switching (SMALL)
        0 - 12VAC
    (5) Model Options
        A - One Auxiliary Relay
        B - Option C and R
        C - Real Time Clock (RTC)
        L - Option A and C
        M - IR receiver and Auxiliary Relay
        N - No Options
        P - 16A, 8A, 8A relays
        Q - Option P and R
        R - IR Receiver
        S - Option C and P
        T - Option A, C, and R
        U - Option C, P, and R
        V - Option A and P
        X - Option A, P, and R
        Y - Option A, C, and P
        Z - Option A, C, P, and R
    (6) Connections, Front, and Mounting Options
        Feature A - Panel mounting from rear with polycarbonate on the front.
        Feature B - Panel mounting from rear with remote membrane keypad on the front.
        0 - No Option	
        1 - Faston (Easy Wide) same as E, panel mounting from rear, feature B	
        2 - Screw Terminals (Easy Wide)  same as F, panel mounting from rear, feature B	
        3 - Screw Terminals (IR33+ Wide)  same as G, panel mounting from rear, feature B	
        4 - Faston, Extra probes (IR33+ Wide) same as H, panel mounting from rear,
            feature B	
        5 - Removebale Terminals (IR33+ Wide) same as I, panel mounting from rear,
            feature B
        6 - Same as L (IR33+ Wide), panel mounting from rear, feature B	
        7 - Same as M (IR33+ Wide), panel mounting from rear, feature B	
        8 - Same as N (IR33+ Wide), panel mounting from rear, feature B	
        A - Screw Terminals (Easy Wide)	
        B - Faston, Extra probes (Easy Wide)	
        C - Removeable Terminals (Easy Wide)	
        D - Faston outputs, Screw terminals Inputs (Easy Wide)	
        E - Faston (Easy Wide)	
        F - Screw Terminals (Easy Wide)	
        G - Scew Terminals (IR33+ Wide)	
        H - Faston, Extra probes (IR33+ Wide)	
        I - Removeable Terminals (IR33+ Wide)	
        L - Faston outputs, Screw Term. Inputs (IR33+ Wide)	
        M - Faston (IR33+ Wide)	
        N - Screw Terminals (IR33+ Wide)	
        P - Same as A (Easy Wide), panel mounting from rear, feature A	
        R - Same as B (Easy Wide), panel mounting from rear, feature A	
        S - Same as C (Easy Wide), panel mounting from rear, feature A	
        T - Same as D (Easy Wide), panel mounting from rear, feature A	
        U - Same as E (Easy Wide), panel mounting from rear, feature A	
        V - Same as F (Easy Wide), panel mounting from rear, feature A	
        W - Same as P (Easy Wide), panel mounting from rear, feature B	
        X - Same as R (Easy Wide), panel mounting from rear, feature B	
        Y - Same as S (Easy Wide), panel mounting from rear, feature B	
        Z - Same as T (Easy Wide), panel mounting from rear, feature B
    (7) Display color
        A - Blue Display
        G - Green Display
        W - White Display
        X - One numeric character as a personalization identifier 
    (8) Packaging/Kitting
        Blank - Single package
        1 - Tool for multiple package
        K - Custom Kit	
[5] With beginning date code of 2016-06-06
[6] Temperature ranges for this thermometer are dependent upon the type of optional probe
    used

[1] Beginning date code October 20, 2008.
[2] With beginning date code of 2007-02-15.
[3] (1) Carel or customer version:
        33 - Standard Carel version+
        EV - Standard Carel IR33+ version
        xx - Any two alphanumeric characters for customer identification
    (2) Number of relays:
        C - Four relays: compressor, defrost, fan, and auxiliary
        F - Three relays: compressor, defrost, and fan
        M - Zero relay
        S - One relay: compressor
        Y - Two relays: compressor and defrost
    (3) Type of temperature probe input: 0 - NTC
    (4) Main voltage:
        0 - 12 V ac or 13-15 Vdc, class 2 supplied
        A - 115 V ac, model provided with transformer - not available for relay code C
        E - 230 V ac, model provided with transformer - not available for relay code C
        H - 115/230 V ac, model provided with switching power supply module - not 
            available for relay code M
        L - 24 V ac or 15-30 Vdc, class 2 supplied
    (5) Model option:
        A - Provided with auxiliary relay
        B - Option C and R
        C - Provided with time clock
        E - Option C and H
        F - Option C, H, and R
        G - Option A and H
        H - Provided with relay 2HP 
        I - Option H and R
        K - Option A, H, and R
        L - Option A and C
        M - Option A and R
        N - Standard
        O - Option A, C, and H
        P - Provided with relay 16 A
        Q - Option P and R
        R - Provided with infrared receiver
        S - Option C and P
        T - Option A, C, and R
        U - Option C, P, and R
        V - Option A and P
        W - Option A, C, H, and R
        X - Option A, P, and R
        Y - Option A, C, and P
        Z - Option A, C, P, and R
    (6) Kind of terminal blocks:
        0/A/C/E/G - Screw terminal blocks
        1         - Quick-connect tabs for relay outputs and plug-in terminal blocks 
                    for IN/OUT signals
        2/D/H     - Plug-in terminal blocks
        3         - Quick-connect tabs for relay outputs and screw terminal blocks 
                    for IN/OUT signals
        5         - Vertical screw terminal blocks
        6         - As 1, back mounting version
        7         - As 2, back mounting version
        8         - As 3, back mounting version
        B/F       - Screw terminal blocks for relay outputs and plug-in terminal 
                    blocks for IN/OUT signals
    (7) Personalization identifier: 0 - Standard, x - One alphanumeric character
    (8) Shipping packaging information:
        Blank - Single package
        1/3/5 - Multiple package
        1/5   - Multiple package
        K     - Kit package with accessories
[4] (1) Note: The first four characters 'PJEZ' represent the standard Carel version;
        or may be 'PZXX' where 'XX' represents a two digit customer code for special
        application software or aesthetical personalization; or may be 'PJYY' where 
        'YY' represents any two alphanumeric characters for CAREL specific 
        application software; or may be "PQXX" where "xx" represents any two alphanumeric 
        characters for customer identification for specific application software or 
        aesthetical personalization. ‘Aesthetical personalization’: includes graphics; the 
        color of the logo on the plastic frame, a different color plastic, different color 
        LEDs or similar changes. The PQxx contains sealed relays and is to be used in 
        applications with flammable refrigerants.
    (2) Numebr of relays, alpha or numeric character
    (3) Type of temperature probe input/version
        0 - NTC probe - buzzer alarm
        1 - NTC probe
        2 - NTC probe - HT range +40 - +150C - buzzer
        3 - NTC probe - HT range +40 - +150C
        8 - NTC probe - buzzer alarm - "SPLIT" version
        N - NTC probe - smaller "Compact" version
    (4) Model option: Zero for Standard or alpha or numeric character for electronic and 
        Bluetooth options
    (5) Voltage: alpha or numeric character for voltage
    (6) Connections type / serial interface: alpha or numeric character
    (7) Personalized identifier: any alpha or numeric character for alternate set point,
        color, etc.
    (8) Packaging: Blank -Standard Carel stand-alone packaging, K- Kit version for 
        multiple delivery, x - Any alpha numeric character indicating personalized 
        packaging.
[5] (1) 2-digit alphanumeric suffix indicating Carel standard version or customer version
        00 - Standard CAREL Power Compact
        01 - Standard CAREL Power Compact
        B1 - CAREL Battery Backup
        B2 - EASY BLAST CHILLER
        EV - Standard CAREL
        F3 - VCC
        Any two alphanumeric characters for customer identification
    (2) Model
        C - Four relays: compressor, defrost, fan, and auxiliary
        D - Driver for external SSR and 3 standard relays (2HP, 8A, 8A)
        F - Three relays: compressor, defrost, and fan
        H - Five relays: Compressor, defrost, fan, two auxiliary
    (3) Type of Probe Input
        0 - NTC probes
        8 - NTC: UL label
        9 - NTC: alternate UL label
    (4) Power Supply
        A - 115VAC (model S, Y, F)
        E - 230VAC (model S, Y, F)
        H - 115/230 VAC Switching (model F, C, H)
        S - 115/230VAC Switching (SMALL)
        0 - 12VAC
    (5) Model Options
        A - One Auxiliary Relay
        B - Option C and R
        C - Real Time Clock (RTC)
        L - Option A and C
        M - IR receiver and Auxiliary Relay
        N - No Options
        P - 16A, 8A, 8A relays
        Q - Option P and R
        R - IR Receiver
        S - Option C and P
        T - Option A, C, and R
        U - Option C, P, and R
        V - Option A and P
        X - Option A, P, and R
        Y - Option A, C, and P
        Z - Option A, C, P, and R
    (6) Connections, Front, and Mounting Options
        Feature A - Panel mounting from rear with polycarbonate on the front.
        Feature B - Panel mounting from rear with remote membrane keypad on the front.
        0 - No Option	
        1 - Faston (Easy Wide) same as E, panel mounting from rear, feature B	
        2 - Screw Terminals (Easy Wide)  same as F, panel mounting from rear, feature B	
        3 - Screw Terminals (IR33+ Wide)  same as G, panel mounting from rear, feature B	
        4 - Faston, Extra probes (IR33+ Wide) same as H, panel mounting from rear, feature 
        B	
        5 - Removebale Terminals (IR33+ Wide) same as I, panel mounting from rear, feature 
        B	
        6 - Same as L (IR33+ Wide), panel mounting from rear, feature B	
        7 - Same as M (IR33+ Wide), panel mounting from rear, feature B	
        8 - Same as N (IR33+ Wide), panel mounting from rear, feature B	
        A - Screw Terminals (Easy Wide)	
        B - Faston, Extra probes (Easy Wide)	
        C - Removeable Terminals (Easy Wide)	
        D - Faston outputs, Screw terminals Inputs (Easy Wide)	
        E - Faston (Easy Wide)	
        F - Screw Terminals (Easy Wide)	
        G - Scew Terminals (IR33+ Wide)	
        H - Faston, Extra probes (IR33+ Wide)	
        I - Removeable Terminals (IR33+ Wide)	
        L - Faston outputs, Screw Term. Inputs (IR33+ Wide)	
        M - Faston (IR33+ Wide)	
        N - Screw Terminals (IR33+ Wide)	
        P - Same as A (Easy Wide), panel mounting from rear, feature A	
        R - Same as B (Easy Wide), panel mounting from rear, feature A	
        S - Same as C (Easy Wide), panel mounting from rear, feature A	
        T - Same as D (Easy Wide), panel mounting from rear, feature A	
        U - Same as E (Easy Wide), panel mounting from rear, feature A	
        V - Same as F (Easy Wide), panel mounting from rear, feature A	
        W - Same as P (Easy Wide), panel mounting from rear, feature B	
        X - Same as R (Easy Wide), panel mounting from rear, feature B	
        Y - Same as S (Easy Wide), panel mounting from rear, feature B	
        Z - Same as T (Easy Wide), panel mounting from rear, feature B
    (7) Display color
        A - Blue Display
        G - Green Display
        W - White Display
        X - One numeric character as a personalization identifier
    (8) Packaging/Kitting
        Blank - Single package
        1 - Tool for multiple package
        K - Custom Kit	
[6] With beginning date code of 2016-06-06
[7] Temperature ranges for this thermometer are dependent upon the type of optional probe
    used

[1] (1) Two numerical digits describing available Mechanical Housing options (Module H):
        01-03 - Panel housing SMALL - Front Mounting (71x29mm)
        04-06 - Panel housing LARGE - Front Mounting (138x29mm)
        07    - Panel housing SMALL – Rear Mounting (71x29mm)
[2] Beginning date code December 12, 2018.
[3] With beginning date code of December 12, 2018.
[4] (1) Carel or customer version:
        33 - Standard Carel version+
        EV - Standard Carel IR33+ version
        xx - Any two alphanumeric characters for customer identification
    (2) Number of relays:
        C - Four relays: compressor, defrost, fan, and auxiliary
        F - Three relays: compressor, defrost, and fan
        M - Zero relay
        S - One relay: compressor
        Y - Two relays: compressor and defrost
    (3) Type of temperature probe input: 0 - NTC
    (4) Main voltage:
        0 - 12 V ac or 13-15 Vdc, class 2 supplied
        A - 115 V ac, model provided with transformer - not available for relay code C
        E - 230 V ac, model provided with transformer - not available for relay code C
        H - 115/230 V ac, model provided with switching power supply module - not 
            available for relay code M
        L - 24 V ac or 15-30 Vdc, class 2 supplied
    (5) Model option:
        A - Provided with auxiliary relay
        B - Option C and R
        C - Provided with time clock
        E - Option C and H
        F - Option C, H, and R
        G - Option A and H
        H - Provided with relay 2HP 
        I - Option H and R
        K - Option A, H, and R
        L - Option A and C
        M - Option A and R
        N - Standard
        O - Option A, C, and H
        P - Provided with relay 16 A
        Q - Option P and R
        R - Provided with infrared receiver
        S - Option C and P
        T - Option A, C, and R
        U - Option C, P, and R
        V - Option A and P
        W - Option A, C, H, and R
        X - Option A, P, and R
        Y - Option A, C, and P
        Z - Option A, C, P, and R
    (6) Kind of terminal blocks:
        0/A/C/E/G - Screw terminal blocks
        1         - Quick-connect tabs for relay outputs and plug-in terminal blocks 
                    for IN/OUT signals
        2/D/H     - Plug-in terminal blocks
        3         - Quick-connect tabs for relay outputs and screw terminal blocks 
                    for IN/OUT signals
        5         - Vertical screw terminal blocks
        6         - As 1, back mounting version
        7         - As 2, back mounting version
        8         - As 3, back mounting version
        B/F       - Screw terminal blocks for relay outputs and plug-in terminal 
                    blocks for IN/OUT signals
    (7) Personalization identifier: 0 - Standard, x - One alphanumeric character
    (8) Shipping packaging information:
        Blank - Single package
        1/3/5 - Multiple package
        1/5   - Multiple package
        K     - Kit package with accessories
[5] (1) 2-digit alphanumeric suffix indicating Carel standard version or customer version
        00 - Standard CAREL Power Compact
        01 - Standard CAREL Power Compact
        B1 - CAREL Battery Backup
        B2 - EASY BLAST CHILLER
        EV - Standard CAREL
        F3 - VCC
        Any two alphanumeric characters for customer identification
    (2) Model
        C - Four relays: compressor, defrost, fan, and auxiliary
        D - Driver for external SSR and 3 standard relays (2HP, 8A, 8A)
        F - Three relays: compressor, defrost, and fan
        H - Five relays: Compressor, defrost, fan, two auxiliary
    (3) Type of Probe Input
        0 - NTC probes
        8 - NTC: UL label
        9 - NTC: alternate UL label
    (4) Power Supply
        A - 115VAC (model S, Y, F)
        E - 230VAC (model S, Y, F)
        H - 115/230 VAC Switching (model F, C, H)
        S - 115/230VAC Switching (SMALL)
        0 - 12VAC
    (5) Model Options
        A - One Auxiliary Relay
        B - Option C and R
        C - Real Time Clock (RTC)
        L - Option A and C
        M - IR receiver and Auxiliary Relay
        N - No Options
        P - 16A, 8A, 8A relays
        Q - Option P and R
        R - IR Receiver
        S - Option C and P
        T - Option A, C, and R
        U - Option C, P, and R
        V - Option A and P
        X - Option A, P, and R
        Y - Option A, C, and P
        Z - Option A, C, P, and R
    (6) Connections, Front, and Mounting Options
        Feature A - Panel mounting from rear with polycarbonate on the front.
        Feature B - Panel mounting from rear with remote membrane keypad on the front.
        0 - No Option	
        1 - Faston (Easy Wide) same as E, panel mounting from rear, feature B	
        2 - Screw Terminals (Easy Wide)  same as F, panel mounting from rear, feature B	
        3 - Screw Terminals (IR33+ Wide)  same as G, panel mounting from rear, feature B	
        4 - Faston, Extra probes (IR33+ Wide) same as H, panel mounting from rear, feature 
        B	
        5 - Removebale Terminals (IR33+ Wide) same as I, panel mounting from rear, feature 
        B	
        6 - Same as L (IR33+ Wide), panel mounting from rear, feature B	
        7 - Same as M (IR33+ Wide), panel mounting from rear, feature B	
        8 - Same as N (IR33+ Wide), panel mounting from rear, feature B	
        A - Screw Terminals (Easy Wide)	
        B - Faston, Extra probes (Easy Wide)	
        C - Removeable Terminals (Easy Wide)	
        D - Faston outputs, Screw terminals Inputs (Easy Wide)	
        E - Faston (Easy Wide)	
        F - Screw Terminals (Easy Wide)	
        G - Scew Terminals (IR33+ Wide)	
        H - Faston, Extra probes (IR33+ Wide)	
        I - Removeable Terminals (IR33+ Wide)	
        L - Faston outputs, Screw Term. Inputs (IR33+ Wide)	
        M - Faston (IR33+ Wide)	
        N - Screw Terminals (IR33+ Wide)	
        P - Same as A (Easy Wide), panel mounting from rear, feature A	
        R - Same as B (Easy Wide), panel mounting from rear, feature A	
        S - Same as C (Easy Wide), panel mounting from rear, feature A	
        T - Same as D (Easy Wide), panel mounting from rear, feature A	
        U - Same as E (Easy Wide), panel mounting from rear, feature A	
        V - Same as F (Easy Wide), panel mounting from rear, feature A	
        W - Same as P (Easy Wide), panel mounting from rear, feature B	
        X - Same as R (Easy Wide), panel mounting from rear, feature B	
        Y - Same as S (Easy Wide), panel mounting from rear, feature B	
        Z - Same as T (Easy Wide), panel mounting from rear, feature B
    (7) Display color
        A - Blue Display
        G - Green Display
        W - White Display
        X - One numeric character as a personalization identifier
    (8) Packaging/Kitting
        Blank - Single package
        1 - Tool for multiple package
        K - Custom Kit	
[6] With beginning date code of 2018-12-12.
[7] Temperature ranges for this thermometer are dependent upon the type of optional probe
    used
[8] (1) Note: The first four characters 'PJEZ' represent the standard Carel version;
        or may be 'PZXX' where 'XX' represents a two digit customer code for special
        application software or aesthetical personalization; or may be 'PJYY' where 
        'YY' represents any two alphanumeric characters for CAREL specific 
        application software; or may be "PQXX" where "xx" represents any two alphanumeric 
        characters for customer identification for specific application software or 
        aesthetical personalization. ‘Aesthetical personalization’: includes graphics; the 
        color of the logo on the plastic frame, a different color plastic, different color 
        LEDs or similar changes. The PQxx contains sealed relays and is to be used in 
        applications with flammable refrigerants.
    (2) Numebr of relays, alpha or numeric character
    (3) Type of temperature probe input/version
        0 - NTC probe - buzzer alarm
        1 - NTC probe
        2 - NTC probe - HT range +40 - +150C - buzzer
        3 - NTC probe - HT range +40 - +150C
        8 - NTC probe - buzzer alarm - "SPLIT" version
        N - NTC probe - smaller "Compact" version
    (4) Model option: Zero for Standard or alpha or numeric character for electronic and 
        Bluetooth options
    (5) Voltage: alpha or numeric character for voltage
    (6) Connections type / serial interface: alpha or numeric character
    (7) Personalized identifier: any alpha or numeric character for alternate set point,
        color, etc.
    (8) Packaging: Blank -Standard Carel stand-alone packaging, K- Kit version for 
        multiple delivery, x - Any alpha numeric character indicating personalized 
        packaging.

[2] Beginning date code October 20, 2008.
[3] With beginning date code of 2007-02-15.
[4] (1) Carel or customer version:
        33 - Standard Carel version
        EV - Standard Carel IR33+ version
        xx - Any two alphanumeric characters for customer identification
    (2) Number of relays:
        C - Four relays: compressor, defrost, fan, and auxiliary
        F - Three relays: compressor, defrost, and fan
        M - Zero relay
        S - One relay: compressor
        Y - Two relays: compressor and defrost
    (3) Type of temperature probe input: 0 - NTC
    (4) Main voltage:
        0 - 12 V ac or 13-15 Vdc, class 2 supplied
        A - 115 V ac, model provided with transformer - not available for relay code C
        E - 230 V ac, model provided with transformer - not available for relay code C
        H - 115/230 V ac, model provided with switching power supply module - not 
            available for relay code M
        L - 24 V ac or 15-30 Vdc, class 2 supplied
    (5) Model option:
        A - Provided with auxiliary relay
        B - Option C and R
        C - Provided with time clock
        E - Option C and H
        F - Option C, H, and R
        G - Option A and H
        H - Provided with relay 2HP 
        I - Option H and R
        K - Option A, H, and R
        L - Option A and C
        M - Option A and R
        N - Standard
        O - Option A, C, and H
        P - Provided with relay 16 A
        Q - Option P and R
        R - Provided with infrared receiver
        S - Option C and P
        T - Option A, C, and R
        U - Option C, P, and R
        V - Option A and P
        W - Option A, C, H, and R
        X - Option A, P, and R
        Y - Option A, C, and P
        Z - Option A, C, P, and R
    (6) Kind of terminal blocks:
        0/A/C/E/G - Screw terminal blocks
        1         - Quick-connect tabs for relay outputs and plug-in terminal blocks 
                    for IN/OUT signals
        2/D/H     - Plug-in terminal blocks
        3         - Quick-connect tabs for relay outputs and screw terminal blocks 
                    for IN/OUT signals
        5         - Vertical screw terminal blocks
        6         - As 1, back mounting version
        7         - As 2, back mounting version
        8         - As 3, back mounting version
        B/F       - Screw terminal blocks for relay outputs and plug-in terminal 
                    blocks for IN/OUT signals
    (7) Personalization identifier: 0 - Standard, x - One alphanumeric character
    (8) Shipping packaging information:
        Blank - Single package
        1/3/5 - Multiple package
        1/5   - Multiple package
        K     - Kit package with accessories
[5] (1) Note: The first four characters 'PJEZ' represent the standard Carel version; 
        or may be 'PZXX' where 'XX' represents a two digit customer code for special
        application software or aesthetical personalization; or may be 'PJYY' where 
       'YY' represents any two alphanumeric characters for CAREL specific 
        application software; or may be "PQXX" where "xx" represents any two alphanumeric 
        characters for customer identification for specific application software or 
        aesthetical personalization. ‘Aesthetical personalization’: includes graphics; the 
        color of the logo on the plastic frame, a different color plastic, different color 
        LEDs or similar changes. The PQxx contains sealed relays and is to be used in
        applications with flammable refrigerants.
    (2) Numebr of relays, alpha or numeric character
    (3) Type of temperature probe input/version
        0 - NTC probe - buzzer alarm
        1 - NTC probe
        2 - NTC probe - HT range +40 - +150C - buzzer
        3 - NTC probe - HT range +40 - +150C
        8 - NTC probe - buzzer alarm - "SPLIT" version
        N - NTC probe - smaller "Compact" version
    (4) Model option: Zero for Standard or alpha or numeric character for electronic 
        and Bluetooth options
    (5) Voltage: alpha or numeric character for voltage
    (6) Connections type / serial interface: alpha or numeric character
    (7) Personalized identifier: any alpha or numeric character for alternate set point,
        color, etc.
    (8) Packaging: Blank -Standard Carel stand-alone packaging, K- Kit version for 
        multiple delivery, x - Any alpha numeric character indicating personalized 
        packaging.
[6] (1) 2-digit alphanumeric suffix indicating Carel standard version or customer version
        00 - Standard CAREL Power Compact
        01 - Standard CAREL Power Compact
        B1 - CAREL Battery Backup
        B2 - EASY BLAST CHILLER
        EV - Standard CAREL
        F3 - VCC
        Any two alphanumeric characters for customer identification
    (2) Model
        C - Four relays: compressor, defrost, fan, and auxiliary
        D - Driver for external SSR and 3 standard relays (2HP, 8A, 8A)
        F - Three relays: compressor, defrost, and fan
        H - Five relays: Compressor, defrost, fan, two auxiliary
    (3) Type of Probe Input
        0 - NTC probes
        8 - NTC: UL label
        9 - NTC: alternate UL label
    (4) Power Supply
        A - 115VAC (model S, Y, F)
        E - 230VAC (model S, Y, F)
        H - 115/230 VAC Switching (model F, C, H)
        S - 115/230VAC Switching (SMALL)
        0 - 12VAC
    (5) Model Options
        A - One Auxiliary Relay
        B - Option C and R
        C - Real Time Clock (RTC)
        L - Option A and C
        M - IR receiver and Auxiliary Relay
        N - No Options
        P - 16A, 8A, 8A relays
        Q - Option P and R
        R - IR Receiver
        S - Option C and P
        T - Option A, C, and R
        U - Option C, P, and R
        V - Option A and P
        X - Option A, P, and R
        Y - Option A, C, and P
        Z - Option A, C, P, and R
    (6) Connections, Front, and Mounting Options
        Feature A - Panel mounting from rear with polycarbonate on the front.
        Feature B - Panel mounting from rear with remote membrane keypad on the front.
        0 - No Option	
        1 - Faston (Easy Wide) same as E, panel mounting from rear, feature B	
        2 - Screw Terminals (Easy Wide)  same as F, panel mounting from rear, feature B	
        3 - Screw Terminals (IR33+ Wide)  same as G, panel mounting from rear, feature B	
        4 - Faston, Extra probes (IR33+ Wide) same as H, panel mounting from rear, feature 
        B	
        5 - Removebale Terminals (IR33+ Wide) same as I, panel mounting from rear, feature 
        B	
        6 - Same as L (IR33+ Wide), panel mounting from rear, feature B	
        7 - Same as M (IR33+ Wide), panel mounting from rear, feature B	
        8 - Same as N (IR33+ Wide), panel mounting from rear, feature B	
        A - Screw Terminals (Easy Wide)	
        B - Faston, Extra probes (Easy Wide)	
        C - Removeable Terminals (Easy Wide)	
        D - Faston outputs, Screw terminals Inputs (Easy Wide)	
        E - Faston (Easy Wide)	
        F - Screw Terminals (Easy Wide)	
        G - Scew Terminals (IR33+ Wide)	
        H - Faston, Extra probes (IR33+ Wide)	
        I - Removeable Terminals (IR33+ Wide)	
        L - Faston outputs, Screw Term. Inputs (IR33+ Wide)	
        M - Faston (IR33+ Wide)	
        N - Screw Terminals (IR33+ Wide)	
        P - Same as A (Easy Wide), panel mounting from rear, feature A	
        R - Same as B (Easy Wide), panel mounting from rear, feature A	
        S - Same as C (Easy Wide), panel mounting from rear, feature A	
        T - Same as D (Easy Wide), panel mounting from rear, feature A	
        U - Same as E (Easy Wide), panel mounting from rear, feature A	
        V - Same as F (Easy Wide), panel mounting from rear, feature A	
        W - Same as P (Easy Wide), panel mounting from rear, feature B	
        X - Same as R (Easy Wide), panel mounting from rear, feature B	
        Y - Same as S (Easy Wide), panel mounting from rear, feature B	
        Z - Same as T (Easy Wide), panel mounting from rear, feature B	
    (7) Display color
        A - Blue Display
        G - Green Display
        W - White Display
        X - One numeric character as a personalization identifier
    (8) Packaging/Kitting
        Blank - Single package
        1 - Tool for multiple package
[7] With beginning date code of 2016-06-03
[8] Temperature ranges for this thermometer are dependent upon the type of optional probe
    used

[1] Model numbers maybe followed by two to five numbers and/or letters indicating color,
    style or design.
[4] This material cannot be used for packing or holding food during cooking.

[1] Model numbers may be followed by two to five numbers and/or letters to indicate color.

[1] Model numbers maybe followed by two to five numbers and/or letters indicating color,
    style or design.

‡ This manufacturer is not authorized to use the NSF Mark in association with any
  electrical or gas operated products that are designed to provide safe temperatures
  during the storage, holding, rethermalization, or rapid pull down of food products.

[1] (1) Number - 0, 1, 2, 3, 4, 5, 6, 7, 8, 9.

[1] (1) Number - 0, 1, 2, 3, 4, 5, 6, 7, 8, 9.
[2] (1) Number -1, 2, 3, 4, 5, 6, 7, 8, 9.
[3] (1) is a number from 1 to 9 indicates different customers.

[2] Available with bracket

[3] Consists of memo and memo dock
[4] Consists of probe and probe dock

[1] Accepted for food zone applications.

[2] Accepted for use in splash zone applications.

[1] Accepted for food zone applications.
[2] Model number on packaging or literature may have additional suffix A or K indicating
    type of packaging.

[1] Accepted for food zone applications.
[2] Model number on packaging or literature may have additional suffix A or K indicating
    type of packaging.

[1] Accepted for food zone applications.

[1] Accepted for food zone applications.
[2] Model number on packaging or literature may have additional suffix A or K indicating
    type of packaging.

[1] Accepted for food zone applications.
[2] Model number on packaging or literature may have additional suffix A or K indicating
    type of packaging.

[1] Accepted for food zone applications.
[2] Model number on packaging or literature may have additional suffix A or K indicating
    type of packaging.

[1] Accepted for food zone applications.
[2] Model number on packaging or literature may have additional suffix A or K indicating
    type of packaging.

[1] Infrared thermometer is intended for scanning and monitoring of surface temperatures
    only.

[1] Infrared thermometer is intended for scanning and monitoring of surface temperatures
    only.
[2] Probe thermometer is Certified as accurate for measuring internal temperatures.
[3] -30ºF to 525ºF/-35ºC to 275ºC range is for infrared thermometer, and -40ºF to
    302°F/-40ºC to 150ºC range is for probe thermometer.

[1] Accepted for food zone applications.

[1] Accepted for food zone applications.

[1] Available with either a 5" or a 6.5" stem.

[2] Accepted for Food Zone

[3] Available with either a 5 inch or a 6.5 inch stem.
[4] Available with either a 5 inch or a 7 inch stem.

[2] Dual Scale

[1] Accepted for Food Zone.

[1] Infrared thermometer is intended for scanning and monitoring of surface temperatures
    only.
[2] Probe thermometer is Certified as accurate for measuring internal temperatures.

[1] Infrared thermometer is intended for scanning and monitoring of surface temperatures
    only.
[2] Probe thermometer is Certified as accurate for measuring internal temperatures.

[1] Infrared thermometer is intended for scanning and monitoring of surface temperature only.

[1] Walk-ins

[1] Certified models begin with production date code 0417, with first two digits indicting
    week and last two digits indicating year.

[1] Probe + sensor wires acceptable for use in a food zone, non-contact applications.
[2] Probe acceptable for use in a food zone, non-contact applications.  Sensor wires
    acceptable for use in a splash zone environment only.
[5] (1) Single alpha character designating sensor length A-W are approved.
    (2) Single alpha character designating sensor cap A-W are approved, C + D,
        acceptable in splash zone only.
    (3) Single alpha character designating sensor wire A-G are approved. K acceptable in
        splash zone only.
    (4) Single alpha character designating options A-S are approved.
    (5) Single alpha character designating potting options.
    (6) Single alpha character (B, D, or F) designating the sensor and the sensor
        connection to the board
    (7) Two, three, or four digit alphanumeric characters designating the power
        supply input.
[14] 0°F to 300°F
[15] 0°C to 149°C
[16] 50°F to 300°F

[1] Model Listing does not include temperature probe.

[1] Model Listing does not include temperature probe.
[2] Lanyard not evaluated as part of Certified product.
[3] Suitable for use with type K thermocouples only.

[4] NSF Certified production beginning with date code 01/25/2013.

[1] Model Listing does not include temperature probe.

[1] (1) - 01, 02, 03, 04, 06 or 08
    (2) - 0, 2 or 4 or 5
    (3) - C, N, P, D, Q, R, G, H, W or Y
    (4) - 0, 1, 2, 3, 4, 5, 6, 7, 8, or 9
    (5) - C, F, H, or L
    (6) - 0, 1, 2, 5, 6, 7, P, Q, R, S, T, U, or V or W
    (7) - F, G, or H
    (8) Up to 2 additional digits (characters or numbers)

[1] (1) - 01, 02, 03, 04, 06 or 08
    (2) - 0, 2 or 4 or 5
    (3) - C, N, P, D, Q, R, G, H, W or Y
    (4) - 0, 1, 2, 3, 4, 5, 6, 7, 8, or 9
    (5) - C, F, H, or L
    (6) - 0, 1, 2, 5, 6, 7, P, Q, R, S, T, U, or V or W
    (7) - F, G, or H
    (8) Up to 2 additional digits (characters or numbers)

[2] (1) - 10, 20, 30, or 40
    (2) - 0, 1, 2, 4, or 5
    (3) - N or R
    (4) - 1 or 3
    (5) - C, F, H, or L
    (6) - 0, 1, 2, 5, or 6
    (7) - F, G, or H

[3] (1) - 10, 20, i20, 30, 35, 40, 50, 56, 60, i60, 64, 70, 71, 72, 75, 77 or i77
    (2) - 0, 1, 2, 3, 4, or 5
    (3) - C, N, P, D, Q, R, G, H, W or Z
    (4) - 0, 1, 2, 3, 4, 5, 6, or 7
    (5) - C, F, H, L, I, M, N, O, P, Q, R, or S
    (6) - 0, 1, 2, 3, 4, 5, 6, 7, 8, or 9 or A or B
    (7) - F, G, or H
    (8) Up to 2 additional digits (characters or numbers)

[3] (1) - 10, 20, i20, 30, 35, 40, 50, 56, 60, i60, 64, 70, 71, 72, 75, 77 or i77
    (2) - 0, 1, 2, 3, 4, or 5
    (3) - C, N, P, D, Q, R, G, H, W or Z
    (4) - 0, 1, 2, 3, 4, 5, 6, or 7
    (5) - C, F, H, L, I, M, N, O, P, Q, R, or S
    (6) - 0, 1, 2, 3, 4, 5, 6, 7, 8, or 9 or A or B
    (7) - F, G, or H
    (8) Up to 2 additional digits (characters or numbers)

[1] (1) - 01, 02, 03, 04, 06, or 08			
    (2) - 0, 2, 4, or 5			
    (3) - C, N, P, D, Q, R, G, H, W or Y			
    (4) - 0, 1, 2, 3, 4, 5, 6, 7, 8, or 9			
    (5) - C, F, H, or L			
    (6) - 0, 1, 2, 5, 6, 7, P, Q, R, S, T, U, V, or W			
    (7) - F, G, or H
    (8) - Up to 2 additional digits (characters or numbers)

[1] (1) - 01, 02, 03, 04, 06, or 08			
    (2) - 0, 2, 4, or 5			
    (3) - C, N, P, D, Q, R, G, H, W or Y			
    (4) - 0, 1, 2, 3, 4, 5, 6, 7, 8, or 9			
    (5) - C, F, H, or L			
    (6) - 0, 1, 2, 5, 6, 7, P, Q, R, S, T, U, V, or W			
    (7) - F, G, or H
    (8) - Up to 2 additional digits (characters or numbers)

[2] (1) - 10, 20, 30, or 40		
    (2) - 0, 1, 2, 4, or 5			
    (3) - N or R			
    (4) - 1 or 3			
    (5) - C, F, H, or L			
    (6) - 0, 1, 2, 5, or 6
    (7) - F, G, or H

[3] (1) - 10, 20, 30, 35, 40, 50, 56, 60, 64, 70, 71, 72, 75, i20, i60, 77, i77
    (2) - 0, 1, 2, 3, 4, or 5			
    (3) - C, N, P, D, Q, R, G, H, W or Y			
    (4) - 0, 1, 2, 3, 4, 5, 6, or 7			
    (5) - C, F, H, L, I, M, N, O, P, Q, R, or S 			
    (6) - 0, 1, 2, 3, 4, 5, 6, 7, 8, or 9			
    (7) - F, G, or H
    (8) - Up to 2 additional digits (characters or numbers)

[3] (1) - 10, 20, 30, 35, 40, 50, 56, 60, 64, 70, 71, 72, 75, i20, i60, 77, i77
    (2) - 0, 1, 2, 3, 4, or 5			
    (3) - C, N, P, D, Q, R, G, H, W or Y			
    (4) - 0, 1, 2, 3, 4, 5, 6, or 7			
    (5) - C, F, H, L, I, M, N, O, P, Q, R, or S 			
    (6) - 0, 1, 2, 3, 4, 5, 6, 7, 8, or 9			
    (7) - F, G, or H
    (8) - Up to 2 additional digits (characters or numbers)

[1] (1) - 01, 02, 03, 04, 06, or 08			
    (2) - 0, 2, 4, or 5			
    (3) - C, N, P, D, Q, R, G, H, W or Y			
    (4) - 0, 1, 2, 3, 4, 5, 6, 7, 8, or 9			
    (5) - C, F, H, or L			
    (6) - 0, 1, 2, 5, 6, 7, P, Q, R, S, T, U, V, or W			
    (7) - F, G, or H
    (8) - Up to 2 additional digits (characters or numbers)

[1] (1) - 01, 02, 03, 04, 06, or 08			
    (2) - 0, 2, 4, or 5			
    (3) - C, N, P, D, Q, R, G, H, W or Y			
    (4) - 0, 1, 2, 3, 4, 5, 6, 7, 8, or 9			
    (5) - C, F, H, or L			
    (6) - 0, 1, 2, 5, 6, 7, P, Q, R, S, T, U, V, or W			
    (7) - F, G, or H
    (8) - Up to 2 additional digits (characters or numbers)

[2] (1) - 10, 20, 30, or 40		
    (2) - 0, 1, 2, 4, or 5			
    (3) - N or R			
    (4) - 1 or 3			
    (5) - C, F, H, or L			
    (6) - 0, 1, 2, 5, or 6
    (7) - F, G, or H

[3] (1) - 10, 20, 30, 35, 40, 50, 56, 60, 64, 70, 71, 72, 75, 77, i20, i60, i77
    (2) - 0, 1, 2, 3, 4, or 5			
    (3) - C, N, P, D, Q, R, G, H, W or Y			
    (4) - 0, 1, 2, 3, 4, 5, 6, or 7			
    (5) - C, F, H, L, I, M, N, O, P, Q, R, or S 			
    (6) - 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, A, or B			
    (7) - F, G, or H
    (8) - Up to 2 additional digits (characters or numbers)

[3] (1) - 10, 20, 30, 35, 40, 50, 56, 60, 64, 70, 71, 72, 75, 77, i20, i60, i77
    (2) - 0, 1, 2, 3, 4, or 5			
    (3) - C, N, P, D, Q, R, G, H, W or Y			
    (4) - 0, 1, 2, 3, 4, 5, 6, or 7			
    (5) - C, F, H, L, I, M, N, O, P, Q, R, or S 			
    (6) - 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, A, or B			
    (7) - F, G, or H
    (8) - Up to 2 additional digits (characters or numbers)

[1] (2) Ordering number.
    (3) Number indicating series of control.
[2] Available with standard and TPE precision sensors, as indicated in the instructions.

[1] (1) number of relays. (Letter from A - 1 relay to D - 4 relays
    (2) Ordering number
    (3) Number indicating series of control.
[2] Available with standard and TPE precision sensors, as indicated in the instructions.

[1] (1) number of relays. (Letter from A - 1 relay to D - 4 relays
    (2) Ordering number
    (3) Number indicating series of control.
[2] Available with standard and TPE precision sensors, as indicated in the instructions.

[3] (1)  Indicates the number of relays: 1, 2, or 3.

[1] Available with NTC 10k Temperature sensor.

[1] Model may have either tapered or straight probe.
[2] Certified models starting with serial number 17-B-1.

[3] With Anti-Microbial Additive: not tested by NSF for efficiency at limiting the spread of
    bacteria.

[3] With Anti-Microbial Additive: not tested by NSF for efficiency at limiting the spread of
    bacteria.

[1] Model may have either tapered or straight probe.
[2] Certified models starting with serial number 17-B-1.

[1] Infrared thermometer is intended for scanning and monitoring of surface temperatures
    only.
[2] Probe thermometer is Certified as accurate for measuring internal temperatures.

[1] Available in various colours.
[2] Units Certified starting from serial number E10100346.

[3] Infrared thermometer is intended for scanning and monitoring of surface temperatures
    only.
[4] Probe thermometer is Certified as accurate for measuring internal temperatures.

[5] Available with various battery cover colours.

[8] Products may include up to an 8 digit suffix consisting of letters or numbers that may
    be separated by dashes or spaces. This suffix may include alternate or optional features
    that have been previously accepted by NSF and/or it may specify how a product is
    packaged or shipped.
    

[8] Products may include up to an 8 digit suffix consisting of letters or numbers that may
    be separated by dashes or spaces. This suffix may include alternate or optional features
    that have been previously accepted by NSF and/or it may specify how a product is
    packaged or shipped.
    
[44] Syrup tank rack retainer ring is not NSF Listed.

[8] Products may include up to an 8 digit suffix consisting of letters or numbers that may
    be separated by dashes or spaces. This suffix may include alternate or optional features
    that have been previously accepted by NSF and/or it may specify how a product is
    packaged or shipped.
    

[8] Products may include up to an 8 digit suffix consisting of letters or numbers that may
    be separated by dashes or spaces. This suffix may include alternate or optional features
    that have been previously accepted by NSF and/or it may specify how a product is
    packaged or shipped.
    

[8] Products may include up to an 8 digit suffix consisting of letters or numbers that may
    be separated by dashes or spaces. This suffix may include alternate or optional features
    that have been previously accepted by NSF and/or it may specify how a product is
    packaged or shipped.
    

[8] Products may include up to an 8 digit suffix consisting of letters or numbers that may
    be separated by dashes or spaces. This suffix may include alternate or optional features
    that have been previously accepted by NSF and/or it may specify how a product is
    packaged or shipped.
    

[99] (1) Indicates the length of the unit

[1] XXXXXXXX: This suffix may include up to an 8 digit suffix consisting of letters or
    numbers that may be separated by dashes or spaces. This suffix may include alternate or
    optional features that have been previously accepted by NSF and/or it may specifiy how a
    product is packaged or shipped.
[2] All Equipment made at this facility will be identified on the label with an '*' asterisk
    after 'Eagle Shelving *'

[1] XXXXXXXX: This suffix may include up to an 8 digit suffix consisting of letters or
    numbers that may be separated by dashes or spaces. This suffix may include alternate or
    optional features that have been previously accepted by NSF and/or it may specifiy how a
    product is packaged or shipped.
[2] All Equipment made at this facility will be identified on the label with an '*' asterisk
    after 'Eagle Shelving *'
[3] Syrup tank rack retainer ring is not NSF Listed.
[5] Available in the following finishes: green epoxy with antimicrobial: not tested by NSF
    for efficacy at limiting the spread of Bacteria:, gray pewter epoxy, black epoxy, clear
    epoxy over zinc plating, stainless steel, white epoxy, value green epoxy, red epoxy,
    chrome silver epoxy.

‡ This manufacturer is not authorized to use the NSF Mark in association with any
  electrical or gas operated products that are designed to provide safe temperatures
  during the storage, holding, rethermalization, or rapid pull down of food products.

[1] NSF Certified production beginning with date code 6/7/05.

[1] Accepted for food zone applications.

[2] Remote reading digital panel mount
[3] Week and year of production are indicated on the dataplate. Models are NSF Certified
    from 41/02.  Remote reading digital mount. All models 230, 115, 24 V-, 12V, except for
    ID985 and ID975 models (12V). PTC or NTC.
[4] (1) Models may or may not have one or more of the following suffixes:
       /A  - Product with alarm relay output
       /AR - Product with alarm relay output and buzzer
       LX  - Product with digital input and Televis compatibility
    (2) Models may or may not have one or more of the following suffixes:J/K PT100, NTC-PTC,
    V/I, 110V, 12/24 Vac-dc, 12V, 24V, 2Hp, 15A, 230V, 16A, 115V
    BUZ., /A - Product with alarm relay output

[5] NSF Certified production beginning November 14, 2012.
[6] (1) Available with or without the following suffixes: /E, /S, or TWIN.

[1] Wall mount in food zone.
[2] Digital indication.

[2] Digital indication.

[1] (1)Letter A from Z, for different customers or packages.

[1] Certified numbers begin with production order and the year and the week at the end.
    (e.g. 46777-0364-1344)
[2] (1) Two digit numeric suffix indicating internal software version from 01-99.

[2] (1) Two digit numeric suffix indicating internal software version from 01-99.

[1] Listed for splash zone applications only.

[1] Available in rectangular or round.
[2] Celsius and Fahrenheit
[3] Available in different ranges in both ºC and ºF of:
    -10ºC to 100ºC/14ºF to 212ºF
    -40ºC to 50ºC/-40ºF to 122ºF
    -50ºC to 50ºC/-58ºF to 122ºF
    -50ºC to 37ºC/-58ºF to 99ºF
    -50ºC to 93ºC/-58ºF to 199ºF
    -50ºC to 125ºC/-58ºF to 252ºF
    -58ºC to 110ºC/-58ºF to 230ºF
[4] Available in different ranges in both ºC and ºF of:
    -10ºC to 100ºC/14ºF to 212ºF
    -40ºC to 50ºC/-40ºF to 122ºF
    -50ºC to 50ºC/-58ºF to 122ºF
    -50ºC to 37ºC/-58ºF to 99ºF
    -50ºC to 93ºC/-58ºF to 199ºF
    -50ºC to 150ºC/-58ºF to 302ºF
    -50ºC to 200ºC/-58ºF to 392ºF
    -80ºC to 37ºC/-112ºF to 99ºF
    -50ºC to 125ºC/-58ºF to 252ºF
    -58ºC to 110ºC/-58ºF to 230ºF
[5] Available in different ranges in both ºC and ºF of:
    -10ºC to 100ºC/14ºF to 212ºF
    -50ºC to 50ºC/-58ºF to 122ºF
    -50ºC to 37ºC/-58ºF to 99ºF
    -50ºC to 93ºC/-58ºF to 199ºF
    -58ºC to 110ºC/-58ºF to 230ºF
[6] Available in different ranges in both ºC and ºF of:
    -100ºC to 200ºC/-148ºF to 392ºF
    -58ºC to 110ºC/-58ºF to 230ºF