NSF Product and Service Listings

These NSF Official Listings are current as of Tuesday, February 20, 2024 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.

Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/Plumbing/Listings.asp?MaterialType=PEX&

Did you know?

The new NSF Product Listings website is available for NSF/ANSI 14-Certified products with a new look and feel. Click on "Try it Now" to check it out!

NSF/ANSI 14
Plastics Piping System Components and Related Materials


Click here for a list of End Use Code Designations.

Click on Product Standards or footnote in blue to view the referenced document



 
Alro Products International 
2348 Linden Boulevard
Brooklyn 
New York, NY 11208 
United States 
718-566-1000
Visit this company's website

Facility : Barcelona, Spain

Potable Water - Pipe and Fittings

Product Type   Material Type   Trade Name   Product Standard

Pipe* @ ¢ § +++ [G]
 
PEX 5106
 
ALROPEX
 
ASTM F876/F877
3/8" - 2"

* Natural (Solid Wall) PEX Pipe Certified 3/8" - 2" sizes. Red, blue, white or orange PEX
  pipe (2 layer pipe - natural with colored adhesive pipe) certified for 3/8" - 1" sizes.
  Tubing certified against CSA B137.5 shall include the standard designation(s) of the
  fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
  marked, as applicable, with the following fitting system designation(s): ASTM F1960,
  ASTM F1807, ASTM F2159, and ASTM F2098.
@ PEX 5106: Meets the chlorine resistance requirements of ASTM F876 when tested in
  accordance with ASTM F2023.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Pipe* @ ¢ § +++ [G]
 
PEX 5106
 
ALROPEX
 
CSA B137.5
3/8" - 2"

* Natural (Solid Wall) PEX Pipe Certified 3/8" - 2" sizes. Red, blue, white or orange PEX
  pipe (2 layer pipe - natural with colored adhesive pipe) certified for 3/8" - 1" sizes.
  Tubing certified against CSA B137.5 shall include the standard designation(s) of the
  fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
  marked, as applicable, with the following fitting system designation(s): ASTM F1960,
  ASTM F1807, ASTM F2159, and ASTM F2098.
@ PEX 5106: Meets the chlorine resistance requirements of ASTM F876 when tested in
  accordance with ASTM F2023.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
      documentation shipped with the product are Certified.

Radiant Floor Heating

Product Type   Material Type   Trade Name   Product Standard

Tubing* @ ¢ §
 
PEX 5106
 
ALROPEX
 
ASTM F876/F877
3/8" - 2"

* Monowall pipe (natural); Skinned pipe (red, blue, white and orange); and Barrier pipe
  (red, blue,white and orange) are certified for the following sizes: 3/8", 1/2", 5/8",
  3/4", 1'', 1 1/2", & 2".
  
  Tubing certified against CSA B137.5 shall include the standard designation(s) of the
  fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
  marked, as applicable with the following fitting system designation(s): ASTM F1960, ASTM
  F1807, ASTM F2159, and ASTM F2098.
@ This tubing product has been evaluated against the performance requirements of ASTM
  F876/877 and CSA B137.5.  This product is not NSF Certified for use in a potable water
  distribution system.  This product has been evaluated for use in radiant floor heating,
  (NSF-rfh),	applications only.				
  
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.

Tubing* @ ¢ §
 
PEX 5106
 
ALROPEX
 
CSA B137.5
3/8" - 2"

* Monowall pipe (natural); Skinned pipe (red, blue, white and orange); and Barrier pipe
  (red, blue,white and orange) are certified for the following sizes: 3/8", 1/2", 5/8",
  3/4", 1'', 1 1/2", & 2".
  
  Tubing certified against CSA B137.5 shall include the standard designation(s) of the
  fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
  marked, as applicable with the following fitting system designation(s): ASTM F1960, ASTM
  F1807, ASTM F2159, and ASTM F2098.
@ This tubing product has been evaluated against the performance requirements of ASTM
  F876/877 and CSA B137.5.  This product is not NSF Certified for use in a potable water
  distribution system.  This product has been evaluated for use in radiant floor heating,
  (NSF-rfh),	applications only.				
  
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.



 
ATI Systems, Inc. 
4339 Main Street
Conestoga, PA 17516 
United States 
717-871-9851
Visit this company's website

Facility : Guangdong, China

Radiant Floor Heating

Product Type   Material Type   Trade Name   Product Standard

Tubing$ * §
 
PEX 5006
 
American Hydronics
 
ASTM F876/F877
>= 1/8" SDR 9

$ Certified for natural, orange, red, and white with oxygen barrier.
* Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.

Tubing$ * ¢ § [1]
 
PEX
 
American Hydronics
 
CSA B137.5
>= 1/8" SDR 9

$ Certified for natural, orange, red, and white with oxygen barrier.
* Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
[1]  Tubing Certified against CSA B137.5 shall include the standard designation(s) of the
     fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
     marked with the following fitting system designations:  ASTM F1807, ASTM F2159, ASTM
     F1960, F2098.

Tubing* ^ ¢ ~  +++ [G]
 
PEX 5006
 
American Hydronics
 
ASTM F876/F877
1/8" - 3"

* Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
~  Certified for Natural non-barrier single layer tubing for 1/8 - 3" sizes. Certified for
   red, white, blue 2-layer tubing for 1/2", 5/8", 3/4", 1" sizes only.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Tubing* ^ ¢ ~  +++ [G] [1]
 
PEX 5006
 
American Hydronics
 
CSA B137.5
1/8" - 3"

* Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
~  Certified for Natural non-barrier single layer tubing for 1/8 - 3" sizes. Certified for
   red, white, blue 2-layer tubing for 1/2", 5/8", 3/4", 1" sizes only.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    
[1]  Tubing Certified against CSA B137.5 shall include the standard designation(s) of the
     fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
     marked with the following fitting system designations:  ASTM F1807, ASTM F2159, ASTM
     F1960, F2098.



 
Auray Managing, S.L.U. 
P.I. Riera de Caldes
Carrer dels Mercaders, 42, Palau-solità 
i Plegamans, Barcelona 08184 
Spain 
34 93 748 10 36
Visit this company's website

Facility : Barcelona, Spain

Potable Water - Pipe and Fittings

Product Type   Material Type   Trade Name   Product Standard

Pipe* @ ¢ § +++ [G]
 
PEX 5106
 
PIPEX
 
ASTM F876/F877
3/8" - 2"

* Natural (Solid Wall) PEX Pipe Certified 3/8" - 2"sizes.  Red, blue, white or orange PEX
  pipe (2 layer pipe - natural with colored adhesive pipe) certified for 3/8" - 1" sizes. 
  Tubing certified against CSA B137.5 shall include the standard designation(s) of the
  fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
  marked, as applicable, with the following fitting system designation(s): ASTM F1960,
  ASTM F1807, ASTM F2159, and ASTM F2098.
@ PEX 5106: Meets the chlorine resistance requirements of ASTM F876 when tested in
  accordance with ASTM F2023.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Pipe* @ ¢ § +++ [G]
 
PEX 5106
 
PIPEX
 
CSA B137.5
3/8" - 2"

* Natural (Solid Wall) PEX Pipe Certified 3/8" - 2"sizes.  Red, blue, white or orange PEX
  pipe (2 layer pipe - natural with colored adhesive pipe) certified for 3/8" - 1" sizes. 
  Tubing certified against CSA B137.5 shall include the standard designation(s) of the
  fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
  marked, as applicable, with the following fitting system designation(s): ASTM F1960,
  ASTM F1807, ASTM F2159, and ASTM F2098.
@ PEX 5106: Meets the chlorine resistance requirements of ASTM F876 when tested in
  accordance with ASTM F2023.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
      documentation shipped with the product are Certified.

Radiant Floor Heating

Product Type   Material Type   Trade Name   Product Standard

Tubing* @ ¢ §
 
PEX 5106
 
PIPEX
 
ASTM F876/F877
3/8" - 2"

* Monowall pipe (natural); Skinned pipe (red, blue, white and orange); and Barrier pipe
  (red, blue, white and orange) are certified for the following sizes: 3/8", 1/2", 5/8",
  3/4", 1", 1-1/4", 1-1/2" & 2".
  
  Tubing certified against CSA B137.5 shall include the standard designation(s) of the
  fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
  marked, as applicable with the following fitting system designation(s): ASTM F1960, ASTM
  F1807, ASTM F2159, and ASTM F2098.
@ This tubing product has been evaluated against the performance requirements of
  ASTM	F876/877 and CSA B137.5.  This product is not NSF Certified for use in a potable
  water distribution system.  This product has been evaluated for use in radiant floor
  heating, (NSF-rfh), applications only.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.

Tubing* @ ¢ §
 
PEX 5106
 
PIPEX
 
CSA B137.5
3/8" - 2"

* Monowall pipe (natural); Skinned pipe (red, blue, white and orange); and Barrier pipe
  (red, blue, white and orange) are certified for the following sizes: 3/8", 1/2", 5/8",
  3/4", 1", 1-1/4", 1-1/2" & 2".
  
  Tubing certified against CSA B137.5 shall include the standard designation(s) of the
  fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
  marked, as applicable with the following fitting system designation(s): ASTM F1960, ASTM
  F1807, ASTM F2159, and ASTM F2098.
@ This tubing product has been evaluated against the performance requirements of
  ASTM	F876/877 and CSA B137.5.  This product is not NSF Certified for use in a potable
  water distribution system.  This product has been evaluated for use in radiant floor
  heating, (NSF-rfh), applications only.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.

NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
      documentation shipped with the product are Certified.


 
Borealis AB 
SE 444 86 Stenungsund
Sweden 
46 303 860 00
Visit this company's website

Facility : Stenungsund, Sweden

Potable Water - Materials

Material Type End Use Trade Name Product Standard
PEX 5006* ^ +++ 1 HE1878E-C2 N/A

* Use of this material in NSF Certified tubing requires NSF's prior authorization.  Tubing
  produced from this material was tested to the performance requirements of ASTM F876.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).


Radiant Floor Heating - Materials

Material Type End Use Trade Name Product Standard
PEX 5006* 1 HE1878E-C2 N/A

* Use of this material in NSF Certified tubing requires NSF's prior authorization.  Tubing
  produced from this material was tested to the performance requirements of ASTM F876.

NSF Certified materials and generic ingredients are exempt from bearing an NSF Certification Mark. Certified materials and generic ingredients are identified by the manufacturer name, facility location, and trade designation as shown in the Official Listing.



 
Bow Plumbing Group, Inc. 
5700 Cote de Liesse
Montreal, QC H4T 1B1 
Canada 
450-372-5481
Visit this company's website

Facility : # 2 Granby, Quebec, Canada

Surface Burning Characteristics of Building Materials

Product Type   Material Type   Trade Name   Product Standard

Tubing# [1]
 
PEX
 
Bowpex
 
ASTM E84
1/2" (without insulation)

# Certified Bowpex tubing is natural, red, or white.
[1] Flame Spread Index <=25, Smoke Developed Index <=50.
    Flame Spread Index and Smoke Developed Index for ASTM E84 is based on minimum spacing of
    18 inches between tubing runs.  Tubing shall be marked [cNSFus® fs ASTM E84 ULC S102.2
    FS25/SD50].

Tubing# ¢ [2]
 
PEX
 
Bowpex
 
CAN/ULC S102.2
1/2" (without insulation)

# Certified Bowpex tubing is natural, red, or white.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[2] Flame Spread Value <=25, Smoke Developed Value <=50.
    Tubing shall be marked [cNSFus® fs ASTM E84 ULC S102.2 FS25/SD50].

Tubing# ¢ [3]
 
PEX
 
Bowpex
 
CAN/ULC S102.2
1/8", 1/4", 3/8", 3/4", 1" (with insulation)

# Certified Bowpex tubing is natural, red, or white.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[3] Flame Spread Value <=25, Smoke Developed Value <=50.
    The Flame Spread Value and Smoke Developed Value is based on when tubing is field
    insulated with 1/2" JM  Microlok HP Hi performance fiberglass insulation as per Bow
    installation instructions.   Tubing shall be marked [cNSF®-fs ULCS102.2 FS25/SD50].

Tubing% [1]
 
PEX
 
Oxypex
 
ASTM E84
1/2" (without insulation)

% Certified Oxypex tubing has a red outer layer.
[1] Flame Spread Index <=25, Smoke Developed Index <=50.
    Flame Spread Index and Smoke Developed Index for ASTM E84 is based on minimum spacing of
    18 inches between tubing runs.  Tubing shall be marked [cNSFus® fs ASTM E84 ULC S102.2
    FS25/SD50].

Tubing% ¢ [2]
 
PEX
 
Oxypex
 
CAN/ULC S102.2
1/2" (without insulation)

% Certified Oxypex tubing has a red outer layer.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[2] Flame Spread Value <=25, Smoke Developed Value <=50.
    Tubing shall be marked [cNSFus® fs ASTM E84 ULC S102.2 FS25/SD50].

Tubing% ¢ [3]
 
PEX
 
Oxypex
 
CAN/ULC S102.2
1/4", 3/8", 5/8", 3/4", 1" (with insulation)

% Certified Oxypex tubing has a red outer layer.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[3] Flame Spread Value <=25, Smoke Developed Value <=50.
    The Flame Spread Value and Smoke Developed Value is based on when tubing is field
    insulated with 1/2" JM  Microlok HP Hi performance fiberglass insulation as per Bow
    installation instructions.   Tubing shall be marked [cNSF®-fs ULCS102.2 FS25/SD50].

Tubing@ [1]
 
PEX
 
Superpex
 
ASTM E84
1/2" (without insulation)

@ Certified Bow Superpex tubing has a blue, red, or white outer layer.
[1] Flame Spread Index <=25, Smoke Developed Index <=50.
    Flame Spread Index and Smoke Developed Index for ASTM E84 is based on minimum spacing of
    18 inches between tubing runs.  Tubing shall be marked [cNSFus® fs ASTM E84 ULC S102.2
    FS25/SD50].

Tubing@ ¢ [2]
 
PEX
 
Superpex
 
CAN/ULC S102.2
1/2" (without insulation)

@ Certified Bow Superpex tubing has a blue, red, or white outer layer.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[2] Flame Spread Value <=25, Smoke Developed Value <=50.
    Tubing shall be marked [cNSFus® fs ASTM E84 ULC S102.2 FS25/SD50].

Tubing@ ¢ [3]
 
PEX
 
Superpex
 
CAN/ULC S102.2
1/4", 3/8", 3/4", 1" (with insulation)

@ Certified Bow Superpex tubing has a blue, red, or white outer layer.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[3] Flame Spread Value <=25, Smoke Developed Value <=50.
    The Flame Spread Value and Smoke Developed Value is based on when tubing is field
    insulated with 1/2" JM  Microlok HP Hi performance fiberglass insulation as per Bow
    installation instructions.   Tubing shall be marked [cNSF®-fs ULCS102.2 FS25/SD50].


Potable Water - Pipe and Fittings

Product Type   Material Type   Trade Name   Product Standard

Tubing! $ * ^ § ++ [G]
 
PEX 5106/5306
 
Bowpex
 
ASTM F876/F877
1/8" - 2" SDR 9

! Product may or may not bear the NSF U.P. code marking.
$ Certified Bowpex tubing is natural (PEX 5106), red, white, and blue (PEX 5306).
* Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
   temperatures up to and including Domestic Hot (140° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Tubing$ & ¢ ++ [G]
 
PEX
 
Bowpex
 
CSA B137.5
1/8" - 2" SDR 9

$ Certified Bowpex tubing is natural (PEX 5106), red, white, and blue (PEX 5306).
& Tubing Certified against CSA B137.5 shall include the standard designation(s) of the
  fitting
  system(s) for which the tubing is recommended by the manufacturer, and shall be marked
  with the
  following fitting system designations: ASTM F1807, ASTM F2159.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
   temperatures up to and including Domestic Hot (140° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Tubing! * @ ^ § ++ [G]
 
PEX 5306
 
Bow Superpex
 
ASTM F876/F877

SDR 9
1/4" - 1 1/4"  

! Product may or may not bear the NSF U.P. code marking.
* Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
@ Certified Bow Superpex tubing has a blue, red, or white outer layer.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
   temperatures up to and including Domestic Hot (140° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Tubing! * @ ^ § ++ [G]
 
PEX 5306
 
Bow Superpex
 
AWWA C904
1/2" - 1 1/4" SDR 9

! Product may or may not bear the NSF U.P. code marking.
* Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
@ Certified Bow Superpex tubing has a blue, red, or white outer layer.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
   temperatures up to and including Domestic Hot (140° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Tubing& @ ¢ ++ [G]
 
PEX
 
Bow Superpex
 
CSA B137.5
1/4" - 1 1/4" SDR 9

& Tubing Certified against CSA B137.5 shall include the standard designation(s) of the
  fitting
  system(s) for which the tubing is recommended by the manufacturer, and shall be marked
  with the
  following fitting system designations: ASTM F1807, ASTM F2159.
@ Certified Bow Superpex tubing has a blue, red, or white outer layer.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
   temperatures up to and including Domestic Hot (140° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Tubing! $ % * ^ ¢ ++ [G]
 
PEX 5106
 
Oxypex
 
ASTM F876/F877
1/4" - 2" SDR 9

! Product may or may not bear the NSF U.P. code marking.
$ Certified Bowpex tubing is natural (PEX 5106), red, white, and blue (PEX 5306).
% Certified Oxypex tubing has a red outer layer.
* Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
   temperatures up to and including Domestic Hot (140° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Tubing% & ¢ ++ [G]
 
PEX
 
Oxypex
 
CSA B137.5
1/4" - 2" SDR 9

% Certified Oxypex tubing has a red outer layer.
& Tubing Certified against CSA B137.5 shall include the standard designation(s) of the
  fitting
  system(s) for which the tubing is recommended by the manufacturer, and shall be marked
  with the
  following fitting system designations: ASTM F1807, ASTM F2159.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
   temperatures up to and including Domestic Hot (140° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    


Radiant Floor Heating

Product Type   Material Type   Trade Name   Product Standard

Tubing! % * ^ ¢ §
 
PEX 5106
 
Oxypex
 
ASTM F876/F877
1/4" - 2" SDR 9

! Product may or may not bear the NSF U.P. code marking.
% Certified Oxypex tubing has a red outer layer.
* Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.

Tubing% ¢
 
PEX
 
Oxypex
 
CSA B137.5
1/4" - 2" SDR 9

% Certified Oxypex tubing has a red outer layer.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.

$ Bow OXYPERT is red, green or blue in color.


 
Calefactio Solutions Inc. 
1120 Boulevard Michele-Bohec
Blainville 
Quebec, QC J7C 5N5 
Canada 
450-951-0818

Facility : Barcelona, Spain

Potable Water - Pipe and Fittings

Product Type   Material Type   Trade Name   Product Standard

Pipe* ¢ § +++ [G]
 
PEX 5106
 
CALEFACTIO
 
ASTM F876/F877
3/8" - 2"

* Natural (Solid Wall) PEX Pipe Certified 3/8" - 2"sizes. Red, blue, white or orange PEX
  pipe (2 layer pipe - natural with colored adhesive pipe) certified for 3/8" - 1" sizes.
  Tubing certified against CSA B137.5 shall include the standard designation(s) of the
  fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
  marked, as applicable, with the following
  fitting system designation(s): ASTM F1960, ASTM F1807, ASTM F2159, and ASTM F2098.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Pipe* @ ¢ § +++ [G]
 
PEX 5106
 
CALEFACTIO
 
CSA B137.5
3/8" - 2"

* Natural (Solid Wall) PEX Pipe Certified 3/8" - 2"sizes. Red, blue, white or orange PEX
  pipe (2 layer pipe - natural with colored adhesive pipe) certified for 3/8" - 1" sizes.
  Tubing certified against CSA B137.5 shall include the standard designation(s) of the
  fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
  marked, as applicable, with the following
  fitting system designation(s): ASTM F1960, ASTM F1807, ASTM F2159, and ASTM F2098.
@ PEX 5106 : Meets the chlorine resistance requirements of ASTM F876 when tested in
  accordance with ASTM F2023.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
      documentation shipped with the product are Certified.

Radiant Floor Heating

Product Type   Material Type   Trade Name   Product Standard

Tubing* @ ¢ §
 
PEX 5106
 
CALEFACTIO
 
ASTM F876/F877

* Monowall pipe (natural); Skinned pipe (red, blue, white and orange); and Barrier pipe
  (red, blue,white and orange) are certified for the following sizes: 3/8", 1/2", 5/8",
  3/4", 1", 1-1/2" & 2".
  Tubing certified against CSA B137.5 shall include the standard designation(s) of the
  fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
  marked, as applicable with the following fitting system designation(s): ASTM F1960, ASTM
  F1807, ASTM F2159, and
  ASTM F2098.
@ This tubing product has been evaluated against the performance requirements of ASTM
  F876/877 and CSA B137.5.  This product is not NSF Certified for use in a potable water
  distribution system.  This product has been evaluated for use in radiant floor heating,
  (NSF-rfh), applications only.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.

Tubing* @ ¢ §
 
PEX 5106
 
CALEFACTIO
 
CSA B137.5

* Monowall pipe (natural); Skinned pipe (red, blue, white and orange); and Barrier pipe
  (red, blue,white and orange) are certified for the following sizes: 3/8", 1/2", 5/8",
  3/4", 1", 1-1/2" & 2".
  Tubing certified against CSA B137.5 shall include the standard designation(s) of the
  fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
  marked, as applicable with the following fitting system designation(s): ASTM F1960, ASTM
  F1807, ASTM F2159, and
  ASTM F2098.
@ This tubing product has been evaluated against the performance requirements of ASTM
  F876/877 and CSA B137.5.  This product is not NSF Certified for use in a potable water
  distribution system.  This product has been evaluated for use in radiant floor heating,
  (NSF-rfh), applications only.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.



 
Cash Acme / Reliance Worldwide 
2400 7th Avenue Southwest
Cullman, AL 35055 
United States 
256-775-8184

Facility : Middlefield, OH

Potable Water - Pipe and Fittings

Product Type   Material Type   Trade Name   Product Standard

Tubing# @ ^ § +++ [G]
 
PEX 5106
 
SHARKBITE®
 
ASTM F876/F877
1/4" - 1" SDR 9

# Authorized for gray and white.
@ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Tubing# & @ ¢ +++ [G]
 
PEX 5106
 
SHARKBITE®
 
CSA B137.5
1/4" - 1" SDR 9

# Authorized for gray and white.
& Tubing Certified against CSA B137.5 shall include the standard designation(s) of the
  fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
  marked, if applicable, with the following fitting system designations: ASTM F1807, ASTM
  F2159, ASTM F2098, ASTM F2080, ASSE 1061, and ASTM F1960.
@ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    


Radiant Floor Heating

Product Type   Material Type   Trade Name   Product Standard

Tubing# * @ ^ ¢ §
 
PEX 5006
 
SHARKBITE®
 
ASTM F876/F877
3/8" - 1" SDR 9

# Authorized for orange color.
* Product is barrier tubing.
@ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.

Tubing# & * @ ¢
 
PEX 5006
 
SHARKBITE®
 
CSA B137.5
3/8" - 1" SDR 9

# Authorized for orange color.
& Tubing Certified against CSA B137.5 shall include the standard designation(s) of the
  fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
  marked, if applicable, with the following fitting system designations: ASTM F1807, ASTM
  F2159, ASTM F2098, ASTM F2080, ASSE 1061, and ASTM F1960.
* Product is barrier tubing.
@ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.



 
CB Supplies Ltd. 
3325 190th Street
Surrey, BC V3S 0L5 
Canada 
800-665-1851 
604-535-5088

Facility : Surrey, British Columbia, Canada

Potable Water - Pipe and Fittings

Product Type   Material Type   Trade Name   Product Standard

Tubing# $ ? @ ^ ~ § +++ [G]
 
PEX 5306
 
CANFLEX™
 
ASTM F876/F877
1/4" - 2" SDR 9

# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. 
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
  radiant heating system made in accordance with the current version of the ASTM F877
  standard intended for a maximum 100 psi water service and a maximum working temperature
  of 180°F.  System components consist of tubing and/or fittings.  To be installed in
  accordance with manufacturer’s instructions and the latest edition of the Uniform
  Plumbing Code™.
? The UV material type 5306 is only applicable to the red, white, light blue and blue pipe.
@ Certified for red, blue, white and natural colors.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Tubing? @ ^ ~ § +++ [G]
 
PEX 5306
 
Canflex
 
AWWA C904
1/2" - 2" SDR 9

? The UV material type 5306 is only applicable to the red, white, light blue and blue pipe.
@ Certified for red, blue, white and natural colors.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Tubing# $ @ ^ ~ ¢ § +++ [3] [G]
 
PEX 5306
 
CANFLEX™
 
CSA B137.5
1/4" - 2" SDR 9

# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. 
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
  radiant heating system made in accordance with the current version of the ASTM F877
  standard intended for a maximum 100 psi water service and a maximum working temperature
  of 180°F.  System components consist of tubing and/or fittings.  To be installed in
  accordance with manufacturer’s instructions and the latest edition of the Uniform
  Plumbing Code™.
@ Certified for red, blue, white and natural colors.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[3] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the
    fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
    marked, as applicable, with the following fitting system designation(s):  ASTM F1807,
    ASTM F2159, ASSE 1061.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Tubing# $ ? @ ^ ~ § +++ [G]
 
PEX 5306
 
CANPEX™
 
ASTM F876/F877
1/4" - 2" SDR 9

# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. 
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
  radiant heating system made in accordance with the current version of the ASTM F877
  standard intended for a maximum 100 psi water service and a maximum working temperature
  of 180°F.  System components consist of tubing and/or fittings.  To be installed in
  accordance with manufacturer’s instructions and the latest edition of the Uniform
  Plumbing Code™.
? The UV material type 5306 is only applicable to the red, white, light blue and blue pipe.
@ Certified for red, blue, white and natural colors.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Tubing? @ ^ ~ § +++ [G]
 
PEX 5306
 
CanPEX
 
AWWA C904
1/2" - 2" SDR 9

? The UV material type 5306 is only applicable to the red, white, light blue and blue pipe.
@ Certified for red, blue, white and natural colors.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Tubing# $ @ ^ ~ ¢ § +++ [3] [G]
 
PEX 5306
 
CANPEX™
 
CSA B137.5
1/4" - 2" SDR 9

# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. 
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
  radiant heating system made in accordance with the current version of the ASTM F877
  standard intended for a maximum 100 psi water service and a maximum working temperature
  of 180°F.  System components consist of tubing and/or fittings.  To be installed in
  accordance with manufacturer’s instructions and the latest edition of the Uniform
  Plumbing Code™.
@ Certified for red, blue, white and natural colors.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[3] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the
    fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
    marked, as applicable, with the following fitting system designation(s):  ASTM F1807,
    ASTM F2159, ASSE 1061.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Tubing! # $ % ^ ~ § +++ [G]
 
PEX 5206
 
CanPEX Barrier
 
ASTM F876/F877
1/4" - 2" SDR 9

! Orange, natural, red, and teal green.
# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. 
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
  radiant heating system made in accordance with the current version of the ASTM F877
  standard intended for a maximum 100 psi water service and a maximum working temperature
  of 180°F.  System components consist of tubing and/or fittings.  To be installed in
  accordance with manufacturer’s instructions and the latest edition of the Uniform
  Plumbing Code™.
% This product is barrier tubing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Tubing! # $ % ^ ~ ¢ § +++ [3] [G]
 
PEX 5206
 
CanPEX Barrier
 
CSA B137.5
1/4" – 2" SDR 9

! Orange, natural, red, and teal green.
# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. 
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
  radiant heating system made in accordance with the current version of the ASTM F877
  standard intended for a maximum 100 psi water service and a maximum working temperature
  of 180°F.  System components consist of tubing and/or fittings.  To be installed in
  accordance with manufacturer’s instructions and the latest edition of the Uniform
  Plumbing Code™.
% This product is barrier tubing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[3] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the
    fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
    marked, as applicable, with the following fitting system designation(s):  ASTM F1807,
    ASTM F2159, ASSE 1061.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Tubing! # $ % ^ ~ § +++ [G]
 
PEX 5206
 
CanPEX OXY Barrier
 
ASTM F876/F877
1/4" - 2" SDR 9

! Orange, natural, red, and teal green.
# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. 
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
  radiant heating system made in accordance with the current version of the ASTM F877
  standard intended for a maximum 100 psi water service and a maximum working temperature
  of 180°F.  System components consist of tubing and/or fittings.  To be installed in
  accordance with manufacturer’s instructions and the latest edition of the Uniform
  Plumbing Code™.
% This product is barrier tubing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Tubing! # $ % ^ ~ ¢ § +++ [3] [G]
 
PEX 5206
 
CanPEX OXY Barrier
 
CSA B137.5
1/4" - 2" SDR 9

! Orange, natural, red, and teal green.
# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. 
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
  radiant heating system made in accordance with the current version of the ASTM F877
  standard intended for a maximum 100 psi water service and a maximum working temperature
  of 180°F.  System components consist of tubing and/or fittings.  To be installed in
  accordance with manufacturer’s instructions and the latest edition of the Uniform
  Plumbing Code™.
% This product is barrier tubing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[3] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the
    fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
    marked, as applicable, with the following fitting system designation(s):  ASTM F1807,
    ASTM F2159, ASSE 1061.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Tubing# $ ^ ~ § µ +++ [G]
 
PEX 5306
 
CanPEX Ultra
 
ASTM F876/F877
3/8" – 2" SDR 9

# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. 
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
  radiant heating system made in accordance with the current version of the ASTM F877
  standard intended for a maximum 100 psi water service and a maximum working temperature
  of 180°F.  System components consist of tubing and/or fittings.  To be installed in
  accordance with manufacturer’s instructions and the latest edition of the Uniform
  Plumbing Code™.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
µ Certified pipe has a black inner layer with a red, white, or blue outer layer.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Tubing# $ ^ ~ ¢ § µ +++ [3] [G]
 
PEX 5306
 
CanPEX Ultra
 
CSA B137.5
3/8" – 2" SDR 9

# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. 
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
  radiant heating system made in accordance with the current version of the ASTM F877
  standard intended for a maximum 100 psi water service and a maximum working temperature
  of 180°F.  System components consist of tubing and/or fittings.  To be installed in
  accordance with manufacturer’s instructions and the latest edition of the Uniform
  Plumbing Code™.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
µ Certified pipe has a black inner layer with a red, white, or blue outer layer.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[3] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the
    fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
    marked, as applicable, with the following fitting system designation(s):  ASTM F1807,
    ASTM F2159, ASSE 1061.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Tubing# $ ? @ ^ ~ § +++ [G]
 
PEX 5306
 
CANPEX™ UV
 
ASTM F876/F877
1/4" - 2" SDR 9

# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. 
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
  radiant heating system made in accordance with the current version of the ASTM F877
  standard intended for a maximum 100 psi water service and a maximum working temperature
  of 180°F.  System components consist of tubing and/or fittings.  To be installed in
  accordance with manufacturer’s instructions and the latest edition of the Uniform
  Plumbing Code™.
? The UV material type 5306 is only applicable to the red, white, light blue and blue pipe.
@ Certified for red, blue, white and natural colors.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Tubing? @ ^ ~ § +++ [G]
 
PEX 5306
 
CanPEX UV
 
AWWA C904
1/2" - 2" SDR 9

? The UV material type 5306 is only applicable to the red, white, light blue and blue pipe.
@ Certified for red, blue, white and natural colors.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Tubing# $ ? @ ^ ~ ¢ § +++ [3] [G]
 
PEX 5306
 
CANPEX™ UV
 
CSA B137.5
1/4" - 2" SDR 9

# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. 
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
  radiant heating system made in accordance with the current version of the ASTM F877
  standard intended for a maximum 100 psi water service and a maximum working temperature
  of 180°F.  System components consist of tubing and/or fittings.  To be installed in
  accordance with manufacturer’s instructions and the latest edition of the Uniform
  Plumbing Code™.
? The UV material type 5306 is only applicable to the red, white, light blue and blue pipe.
@ Certified for red, blue, white and natural colors.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[3] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the
    fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
    marked, as applicable, with the following fitting system designation(s):  ASTM F1807,
    ASTM F2159, ASSE 1061.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Tubing# $ ? @ ^ ~ § +++ [G]
 
PEX 5306
 
CANPEX™ UV +
 
ASTM F876/F877
1/4" - 2" SDR 9

# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. 
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
  radiant heating system made in accordance with the current version of the ASTM F877
  standard intended for a maximum 100 psi water service and a maximum working temperature
  of 180°F.  System components consist of tubing and/or fittings.  To be installed in
  accordance with manufacturer’s instructions and the latest edition of the Uniform
  Plumbing Code™.
? The UV material type 5306 is only applicable to the red, white, light blue and blue pipe.
@ Certified for red, blue, white and natural colors.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Tubing? @ ^ ~ § +++ [G]
 
PEX 5306
 
CanPEX UV+
 
AWWA C904
1/2" - 2" SDR 9

? The UV material type 5306 is only applicable to the red, white, light blue and blue pipe.
@ Certified for red, blue, white and natural colors.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Tubing# $ ? @ ^ ~ ¢ § +++ [3] [G]
 
PEX 5306
 
CANPEX™ UV +
 
CSA B137.5
1/4" - 2" SDR 9

# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. 
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
  radiant heating system made in accordance with the current version of the ASTM F877
  standard intended for a maximum 100 psi water service and a maximum working temperature
  of 180°F.  System components consist of tubing and/or fittings.  To be installed in
  accordance with manufacturer’s instructions and the latest edition of the Uniform
  Plumbing Code™.
? The UV material type 5306 is only applicable to the red, white, light blue and blue pipe.
@ Certified for red, blue, white and natural colors.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[3] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the
    fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
    marked, as applicable, with the following fitting system designation(s):  ASTM F1807,
    ASTM F2159, ASSE 1061.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Tubing# $ ? @ ^ ~ § +++ [G]
 
PEX 5306
 
CANPEX™ UV + MD
 
ASTM F876/F877
1/4" - 2" SDR 9

# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. 
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
  radiant heating system made in accordance with the current version of the ASTM F877
  standard intended for a maximum 100 psi water service and a maximum working temperature
  of 180°F.  System components consist of tubing and/or fittings.  To be installed in
  accordance with manufacturer’s instructions and the latest edition of the Uniform
  Plumbing Code™.
? The UV material type 5306 is only applicable to the red, white, light blue and blue pipe.
@ Certified for red, blue, white and natural colors.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Tubing? @ ^ ~ § +++ [G]
 
PEX 5306
 
CanPEX UV+MD
 
AWWA C904
1/2" - 2" SDR 9

? The UV material type 5306 is only applicable to the red, white, light blue and blue pipe.
@ Certified for red, blue, white and natural colors.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Tubing# $ ? @ ^ ~ ¢ § +++ [3] [G]
 
PEX 5306
 
CANPEX™ UV + MD
 
CSA B137.5
1/4" - 2" SDR 9

# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. 
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
  radiant heating system made in accordance with the current version of the ASTM F877
  standard intended for a maximum 100 psi water service and a maximum working temperature
  of 180°F.  System components consist of tubing and/or fittings.  To be installed in
  accordance with manufacturer’s instructions and the latest edition of the Uniform
  Plumbing Code™.
? The UV material type 5306 is only applicable to the red, white, light blue and blue pipe.
@ Certified for red, blue, white and natural colors.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[3] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the
    fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
    marked, as applicable, with the following fitting system designation(s):  ASTM F1807,
    ASTM F2159, ASSE 1061.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Tubing# $ ? @ ^ ~ § +++ [G]
 
PEX 5306
 
CANPEX™ UV Plus
 
ASTM F876/F877
1/4" - 2" SDR 9

# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. 
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
  radiant heating system made in accordance with the current version of the ASTM F877
  standard intended for a maximum 100 psi water service and a maximum working temperature
  of 180°F.  System components consist of tubing and/or fittings.  To be installed in
  accordance with manufacturer’s instructions and the latest edition of the Uniform
  Plumbing Code™.
? The UV material type 5306 is only applicable to the red, white, light blue and blue pipe.
@ Certified for red, blue, white and natural colors.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Tubing? @ ^ ~ § +++ [G]
 
PEX 5306
 
CanPEX UV Plus
 
AWWA C904
1/2" - 2" SDR 9

? The UV material type 5306 is only applicable to the red, white, light blue and blue pipe.
@ Certified for red, blue, white and natural colors.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Tubing# $ ? @ ^ ~ ¢ § +++ [3] [G]
 
PEX 5306
 
CANPEX™ UV Plus
 
CSA B137.5
1/4" - 2" SDR 9

# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. 
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
  radiant heating system made in accordance with the current version of the ASTM F877
  standard intended for a maximum 100 psi water service and a maximum working temperature
  of 180°F.  System components consist of tubing and/or fittings.  To be installed in
  accordance with manufacturer’s instructions and the latest edition of the Uniform
  Plumbing Code™.
? The UV material type 5306 is only applicable to the red, white, light blue and blue pipe.
@ Certified for red, blue, white and natural colors.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[3] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the
    fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
    marked, as applicable, with the following fitting system designation(s):  ASTM F1807,
    ASTM F2159, ASSE 1061.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Tubing# $ ? @ ^ ~ § +++ [G]
 
PEX 5306
 
CANPEX™ UV Plus MD
 
ASTM F876/F877
1/4" - 2" SDR 9

# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. 
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
  radiant heating system made in accordance with the current version of the ASTM F877
  standard intended for a maximum 100 psi water service and a maximum working temperature
  of 180°F.  System components consist of tubing and/or fittings.  To be installed in
  accordance with manufacturer’s instructions and the latest edition of the Uniform
  Plumbing Code™.
? The UV material type 5306 is only applicable to the red, white, light blue and blue pipe.
@ Certified for red, blue, white and natural colors.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Tubing? @ ^ ~ § +++ [G]
 
PEX 5306
 
CanPEX UV Plus MD
 
AWWA C904
1/2" - 2" SDR 9

? The UV material type 5306 is only applicable to the red, white, light blue and blue pipe.
@ Certified for red, blue, white and natural colors.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Tubing# $ ? @ ^ ~ ¢ § +++ [3] [G]
 
PEX 5306
 
CANPEX™ UV Plus MD
 
CSA B137.5
1/4" - 2" SDR 9

# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. 
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
  radiant heating system made in accordance with the current version of the ASTM F877
  standard intended for a maximum 100 psi water service and a maximum working temperature
  of 180°F.  System components consist of tubing and/or fittings.  To be installed in
  accordance with manufacturer’s instructions and the latest edition of the Uniform
  Plumbing Code™.
? The UV material type 5306 is only applicable to the red, white, light blue and blue pipe.
@ Certified for red, blue, white and natural colors.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[3] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the
    fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
    marked, as applicable, with the following fitting system designation(s):  ASTM F1807,
    ASTM F2159, ASSE 1061.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Tubing# $ ? @ ^ ~ § +++ [G]
 
PEX 5306
 
CANPLUMB™
 
ASTM F876/F877
1/4" - 2" SDR 9

# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. 
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
  radiant heating system made in accordance with the current version of the ASTM F877
  standard intended for a maximum 100 psi water service and a maximum working temperature
  of 180°F.  System components consist of tubing and/or fittings.  To be installed in
  accordance with manufacturer’s instructions and the latest edition of the Uniform
  Plumbing Code™.
? The UV material type 5306 is only applicable to the red, white, light blue and blue pipe.
@ Certified for red, blue, white and natural colors.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Tubing? @ ^ ~ § +++ [G]
 
PEX 5306
 
CanPLUMB
 
AWWA C904
1/2" - 2" SDR 9

? The UV material type 5306 is only applicable to the red, white, light blue and blue pipe.
@ Certified for red, blue, white and natural colors.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Tubing# $ @ ^ ~ ¢ § +++ [3] [G]
 
PEX 5306
 
CANPLUMB™
 
CSA B137.5
1/4" - 2" SDR 9

# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. 
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
  radiant heating system made in accordance with the current version of the ASTM F877
  standard intended for a maximum 100 psi water service and a maximum working temperature
  of 180°F.  System components consist of tubing and/or fittings.  To be installed in
  accordance with manufacturer’s instructions and the latest edition of the Uniform
  Plumbing Code™.
@ Certified for red, blue, white and natural colors.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[3] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the
    fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
    marked, as applicable, with the following fitting system designation(s):  ASTM F1807,
    ASTM F2159, ASSE 1061.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Tubing! # $ % ^ ~ § +++ [G]
 
PEX 5206
 
CanRay
 
ASTM F876/F877
1/4" - 2" SDR 9

! Orange, natural, red, and teal green.
# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. 
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
  radiant heating system made in accordance with the current version of the ASTM F877
  standard intended for a maximum 100 psi water service and a maximum working temperature
  of 180°F.  System components consist of tubing and/or fittings.  To be installed in
  accordance with manufacturer’s instructions and the latest edition of the Uniform
  Plumbing Code™.
% This product is barrier tubing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Tubing! # $ % ^ ~ ¢ § +++ [3] [G]
 
PEX 5206
 
CanRay
 
CSA B137.5
1/4" – 2" SDR 9

! Orange, natural, red, and teal green.
# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. 
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
  radiant heating system made in accordance with the current version of the ASTM F877
  standard intended for a maximum 100 psi water service and a maximum working temperature
  of 180°F.  System components consist of tubing and/or fittings.  To be installed in
  accordance with manufacturer’s instructions and the latest edition of the Uniform
  Plumbing Code™.
% This product is barrier tubing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[3] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the
    fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
    marked, as applicable, with the following fitting system designation(s):  ASTM F1807,
    ASTM F2159, ASSE 1061.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Tubing! # $ % ^ ~ § Þ
 
PEX 5206
 
Embassy / LiquiPEX w/O2 Barrier
 
ASTM F876/F877
1/4" – 2" SDR 9

! Orange, natural, red, and teal green.
# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. 
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
  radiant heating system made in accordance with the current version of the ASTM F877
  standard intended for a maximum 100 psi water service and a maximum working temperature
  of 180°F.  System components consist of tubing and/or fittings.  To be installed in
  accordance with manufacturer’s instructions and the latest edition of the Uniform
  Plumbing Code™.
% This product is barrier tubing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
Þ Product is Certified to the International Plumbing Code. Installation in accordance with
  the manufacturer's instructions and the requirements of the latest edition of the
  International Plumbing Code.

Tubing! # $ % ^ ~ ¢ § Þ [3]
 
PEX 5206
 
Embassy / LiquiPEX w/O2 Barrier
 
CSA B137.5
1/4" – 2" SDR 9

! Orange, natural, red, and teal green.
# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. 
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
  radiant heating system made in accordance with the current version of the ASTM F877
  standard intended for a maximum 100 psi water service and a maximum working temperature
  of 180°F.  System components consist of tubing and/or fittings.  To be installed in
  accordance with manufacturer’s instructions and the latest edition of the Uniform
  Plumbing Code™.
% This product is barrier tubing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
Þ Product is Certified to the International Plumbing Code. Installation in accordance with
  the manufacturer's instructions and the requirements of the latest edition of the
  International Plumbing Code.
[3] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the
    fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
    marked, as applicable, with the following fitting system designation(s):  ASTM F1807,
    ASTM F2159, ASSE 1061.

Tubing# $ ? @ ^ ~ § +++ [G]
 
PEX 5306
 
LYNX-PEX
 
ASTM F876/F877
1/4" - 2" SDR 9

# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. 
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
  radiant heating system made in accordance with the current version of the ASTM F877
  standard intended for a maximum 100 psi water service and a maximum working temperature
  of 180°F.  System components consist of tubing and/or fittings.  To be installed in
  accordance with manufacturer’s instructions and the latest edition of the Uniform
  Plumbing Code™.
? The UV material type 5306 is only applicable to the red, white, light blue and blue pipe.
@ Certified for red, blue, white and natural colors.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Tubing? @ ^ ~ § +++ [G]
 
PEX 5306
 
LYNX-PEX
 
AWWA C904
1/2" - 2" SDR 9

? The UV material type 5306 is only applicable to the red, white, light blue and blue pipe.
@ Certified for red, blue, white and natural colors.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Tubing# $ ? @ ^ ~ ¢ § +++ [3] [G]
 
PEX 5306
 
LYNX-PEX
 
CSA B137.5
1/4" - 2" SDR 9

# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. 
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
  radiant heating system made in accordance with the current version of the ASTM F877
  standard intended for a maximum 100 psi water service and a maximum working temperature
  of 180°F.  System components consist of tubing and/or fittings.  To be installed in
  accordance with manufacturer’s instructions and the latest edition of the Uniform
  Plumbing Code™.
? The UV material type 5306 is only applicable to the red, white, light blue and blue pipe.
@ Certified for red, blue, white and natural colors.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[3] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the
    fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
    marked, as applicable, with the following fitting system designation(s):  ASTM F1807,
    ASTM F2159, ASSE 1061.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Tubing# $ ? @ ^ ~ § +++ [G]
 
PEX 5306
 
Radiant Floor Company/ DURA-POLY XL
 
ASTM F876/F877
1/4" - 2" SDR 9

# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. 
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
  radiant heating system made in accordance with the current version of the ASTM F877
  standard intended for a maximum 100 psi water service and a maximum working temperature
  of 180°F.  System components consist of tubing and/or fittings.  To be installed in
  accordance with manufacturer’s instructions and the latest edition of the Uniform
  Plumbing Code™.
? The UV material type 5306 is only applicable to the red, white, light blue and blue pipe.
@ Certified for red, blue, white and natural colors.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Tubing# $ ? @ ^ ~ ¢ § +++ [3] [G]
 
PEX 5306
 
Radiant Floor Company/ DURA-POLY XL
 
CSA B137.5
1/4" - 2" SDR 9

# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. 
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
  radiant heating system made in accordance with the current version of the ASTM F877
  standard intended for a maximum 100 psi water service and a maximum working temperature
  of 180°F.  System components consist of tubing and/or fittings.  To be installed in
  accordance with manufacturer’s instructions and the latest edition of the Uniform
  Plumbing Code™.
? The UV material type 5306 is only applicable to the red, white, light blue and blue pipe.
@ Certified for red, blue, white and natural colors.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[3] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the
    fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
    marked, as applicable, with the following fitting system designation(s):  ASTM F1807,
    ASTM F2159, ASSE 1061.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Tubing! # $ ^ ~ § +++ [G]
 
PEX 5206
 
Radiant Floor Company / DURA-POLY XL
 
ASTM F876/F877
1/4" - 2" SDR 9

! Orange, natural, red, and teal green.
# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. 
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
  radiant heating system made in accordance with the current version of the ASTM F877
  standard intended for a maximum 100 psi water service and a maximum working temperature
  of 180°F.  System components consist of tubing and/or fittings.  To be installed in
  accordance with manufacturer’s instructions and the latest edition of the Uniform
  Plumbing Code™.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Tubing! # $ % ^ ~ ¢ § +++ [3] [G]
 
PEX 5206
 
Radiant Floor Company/ DURA-POLY XL
 
CSA B137.5
1/4" - 2" SDR 9

! Orange, natural, red, and teal green.
# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. 
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
  radiant heating system made in accordance with the current version of the ASTM F877
  standard intended for a maximum 100 psi water service and a maximum working temperature
  of 180°F.  System components consist of tubing and/or fittings.  To be installed in
  accordance with manufacturer’s instructions and the latest edition of the Uniform
  Plumbing Code™.
% This product is barrier tubing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[3] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the
    fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
    marked, as applicable, with the following fitting system designation(s):  ASTM F1807,
    ASTM F2159, ASSE 1061.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Tubing! # $ @ ^ ~ § +++ [G]
 
PEX 5206
 
Radiantec Company Inc. / Radiantec
 
ASTM F876/F877
1/2" - 3/4" SDR 9

! Orange, natural, red, and teal green.
# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. 
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
  radiant heating system made in accordance with the current version of the ASTM F877
  standard intended for a maximum 100 psi water service and a maximum working temperature
  of 180°F.  System components consist of tubing and/or fittings.  To be installed in
  accordance with manufacturer’s instructions and the latest edition of the Uniform
  Plumbing Code™.
@ Certified for red, blue, white and natural colors.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Tubing! # $ % ^ ~ ¢ § +++ [3] [G]
 
PEX 5206
 
Radiantec Company Inc. / Radiantec
 
CSA B137.5
1/2" - 3/4" SDR 9

! Orange, natural, red, and teal green.
# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. 
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
  radiant heating system made in accordance with the current version of the ASTM F877
  standard intended for a maximum 100 psi water service and a maximum working temperature
  of 180°F.  System components consist of tubing and/or fittings.  To be installed in
  accordance with manufacturer’s instructions and the latest edition of the Uniform
  Plumbing Code™.
% This product is barrier tubing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[3] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the
    fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
    marked, as applicable, with the following fitting system designation(s):  ASTM F1807,
    ASTM F2159, ASSE 1061.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Tubing! # $ % ^ ~ § +++ [G]
 
PEX 5206
 
RadiantMax
 
ASTM F876/F877
1/4" - 2" SDR 9

! Orange, natural, red, and teal green.
# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. 
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
  radiant heating system made in accordance with the current version of the ASTM F877
  standard intended for a maximum 100 psi water service and a maximum working temperature
  of 180°F.  System components consist of tubing and/or fittings.  To be installed in
  accordance with manufacturer’s instructions and the latest edition of the Uniform
  Plumbing Code™.
% This product is barrier tubing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Tubing! # $ % ^ ~ ¢ § +++ [3] [G]
 
PEX 5206
 
RadiantMax
 
CSA B137.5
1/4" – 2" SDR 9

! Orange, natural, red, and teal green.
# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. 
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
  radiant heating system made in accordance with the current version of the ASTM F877
  standard intended for a maximum 100 psi water service and a maximum working temperature
  of 180°F.  System components consist of tubing and/or fittings.  To be installed in
  accordance with manufacturer’s instructions and the latest edition of the Uniform
  Plumbing Code™.
% This product is barrier tubing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[3] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the
    fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
    marked, as applicable, with the following fitting system designation(s):  ASTM F1807,
    ASTM F2159, ASSE 1061.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Tubing# $ ? @ ^ ~ § +++ [G]
 
PEX 5306
 
Vanex
 
ASTM F876/F877
1/4" - 2" SDR 9

# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. 
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
  radiant heating system made in accordance with the current version of the ASTM F877
  standard intended for a maximum 100 psi water service and a maximum working temperature
  of 180°F.  System components consist of tubing and/or fittings.  To be installed in
  accordance with manufacturer’s instructions and the latest edition of the Uniform
  Plumbing Code™.
? The UV material type 5306 is only applicable to the red, white, light blue and blue pipe.
@ Certified for red, blue, white and natural colors.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Tubing? @ ^ ~ § +++ [G]
 
PEX 5306
 
Vanex
 
AWWA C904
1/2" - 2" SDR 9

? The UV material type 5306 is only applicable to the red, white, light blue and blue pipe.
@ Certified for red, blue, white and natural colors.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Tubing# $ @ ^ ~ ¢ § +++ [3] [G]
 
PEX 5306
 
Vanex
 
CSA B137.5
1/4" – 2" SDR 9

# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. 
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
  radiant heating system made in accordance with the current version of the ASTM F877
  standard intended for a maximum 100 psi water service and a maximum working temperature
  of 180°F.  System components consist of tubing and/or fittings.  To be installed in
  accordance with manufacturer’s instructions and the latest edition of the Uniform
  Plumbing Code™.
@ Certified for red, blue, white and natural colors.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[3] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the
    fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
    marked, as applicable, with the following fitting system designation(s):  ASTM F1807,
    ASTM F2159, ASSE 1061.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Tubing! # $ % ^ ~ ¢ § +++ [3] [G]
 
PEX 5206
 
Vanex Barrier
 
CSA B137.5
1/4" – 2" SDR 9

! Orange, natural, red, and teal green.
# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. 
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
  radiant heating system made in accordance with the current version of the ASTM F877
  standard intended for a maximum 100 psi water service and a maximum working temperature
  of 180°F.  System components consist of tubing and/or fittings.  To be installed in
  accordance with manufacturer’s instructions and the latest edition of the Uniform
  Plumbing Code™.
% This product is barrier tubing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[3] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the
    fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
    marked, as applicable, with the following fitting system designation(s):  ASTM F1807,
    ASTM F2159, ASSE 1061.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Tubing! # $ % ^ ~ § +++ [G]
 
PEX 5206
 
Vanex Barrier
 
ASTM F876/F877
1/4" - 2" SDR 9

! Orange, natural, red, and teal green.
# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. 
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
  radiant heating system made in accordance with the current version of the ASTM F877
  standard intended for a maximum 100 psi water service and a maximum working temperature
  of 180°F.  System components consist of tubing and/or fittings.  To be installed in
  accordance with manufacturer’s instructions and the latest edition of the Uniform
  Plumbing Code™.
% This product is barrier tubing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Tubing# $ ^ ~ § µ +++ [G]
 
PEX 5306
 
Vanex Ultra
 
ASTM F876/F877
3/8" – 2" SDR 9

# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. 
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
  radiant heating system made in accordance with the current version of the ASTM F877
  standard intended for a maximum 100 psi water service and a maximum working temperature
  of 180°F.  System components consist of tubing and/or fittings.  To be installed in
  accordance with manufacturer’s instructions and the latest edition of the Uniform
  Plumbing Code™.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
µ Certified pipe has a black inner layer with a red, white, or blue outer layer.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Tubing# $ ^ ~ ¢ § µ +++ [3] [G]
 
PEX 5306
 
Vanex Ultra
 
CSA B137.5
3/8" – 2" SDR 9

# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. 
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
  radiant heating system made in accordance with the current version of the ASTM F877
  standard intended for a maximum 100 psi water service and a maximum working temperature
  of 180°F.  System components consist of tubing and/or fittings.  To be installed in
  accordance with manufacturer’s instructions and the latest edition of the Uniform
  Plumbing Code™.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
µ Certified pipe has a black inner layer with a red, white, or blue outer layer.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[3] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the
    fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
    marked, as applicable, with the following fitting system designation(s):  ASTM F1807,
    ASTM F2159, ASSE 1061.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.

Reclaimed Water - Pipe and Fittings

Product Type   Material Type   Trade Name   Product Standard

Pipe# @ §
 
PEX 5306
 
Canflex
 
ASTM F876/F877
1/4" - 2" SDR 9

# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd.
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
@ Certified for purple color.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.

Pipe@ §
 
PEX 5306
 
Canflex
 
AWWA C904
1/2" - 2" SDR 9

@ Certified for purple color.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.

Pipe# @ ¢ § [1]
 
PEX 5306
 
Canflex
 
CSA B137.5
1/4" - 2" SDR 9

# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd.
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
@ Certified for purple color.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
[1] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the
    fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
    marked, as applicable, with the following fitting system designation(s): ASTM F1807,
    ASTM F2159, ASSE 1061.

Pipe# @ §
 
PEX 5306
 
CanPEX
 
ASTM F876/F877
1/4" - 2" SDR 9

# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd.
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
@ Certified for purple color.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.

Pipe@ §
 
PEX 5306
 
CanPEX
 
AWWA C904
1/2" - 2" SDR 9

@ Certified for purple color.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.

Pipe# @ ¢ § [1]
 
PEX 5306
 
CanPEX
 
CSA B137.5
1/4" - 2" SDR 9

# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd.
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
@ Certified for purple color.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
[1] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the
    fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
    marked, as applicable, with the following fitting system designation(s): ASTM F1807,
    ASTM F2159, ASSE 1061.

Pipe# @ §
 
PEX 5306
 
CanPex UV
 
ASTM F876/F877
1/4" - 2" SDR 9

# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd.
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
@ Certified for purple color.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.

Pipe@ §
 
PEX 5306
 
CanPex UV
 
AWWA C904
1/2" - 2" SDR 9

@ Certified for purple color.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.

Pipe# @ ¢ § [1]
 
PEX 5306
 
CanPex UV
 
CSA B137.5
1/4" - 2" SDR 9

# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd.
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
@ Certified for purple color.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
[1] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the
    fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
    marked, as applicable, with the following fitting system designation(s): ASTM F1807,
    ASTM F2159, ASSE 1061.

Pipe# @ §
 
PEX 5306
 
CanPex UV Plus
 
ASTM F876/F877
1/4" - 2" SDR 9

# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd.
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
@ Certified for purple color.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.

Pipe@ §
 
PEX 5306
 
CanPex UV Plus
 
AWWA C904
1/2" - 2" SDR 9

@ Certified for purple color.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.

Pipe# @ ¢ § [1]
 
PEX 5306
 
CanPex UV Plus
 
CSA B137.5
1/4" - 2" SDR 9

# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd.
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
@ Certified for purple color.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
[1] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the
    fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
    marked, as applicable, with the following fitting system designation(s): ASTM F1807,
    ASTM F2159, ASSE 1061.

Pipe# @ §
 
PEX 5306
 
CanPex UV Plus MD
 
ASTM F876/F877
1/4" - 2" SDR 9

# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd.
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
@ Certified for purple color.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.

Pipe@ §
 
PEX 5306
 
CanPex UV Plus MD
 
AWWA C904
1/2" - 2" SDR 9

@ Certified for purple color.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.

Pipe# @ ¢ § [1]
 
PEX 5306
 
CanPex UV Plus MD
 
CSA B137.5
1/4" - 2" SDR 9

# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd.
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
@ Certified for purple color.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
[1] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the
    fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
    marked, as applicable, with the following fitting system designation(s): ASTM F1807,
    ASTM F2159, ASSE 1061.

Pipe# @ §
 
PEX 5306
 
CanPEX UV+
 
ASTM F876/F877
1/4" - 2" SDR 9

# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd.
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
@ Certified for purple color.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.

Pipe@ §
 
PEX 5306
 
CanPEX UV+
 
AWWA C904
1/2" - 2" SDR 9

@ Certified for purple color.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.

Pipe# @ ¢ § [1]
 
PEX 5306
 
CanPEX UV+
 
CSA B137.5
1/4" - 2" SDR 9

# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd.
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
@ Certified for purple color.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
[1] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the
    fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
    marked, as applicable, with the following fitting system designation(s): ASTM F1807,
    ASTM F2159, ASSE 1061.

Pipe# @ §
 
PEX 5306
 
CanPEX UV+MD
 
ASTM F876/F877
1/4" - 2" SDR 9

# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd.
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
@ Certified for purple color.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.

Pipe@ §
 
PEX 5306
 
CanPEX UV+MD
 
AWWA C904
1/2" - 2" SDR 9

@ Certified for purple color.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.

Pipe# @ ¢ § [1]
 
PEX 5306
 
CanPEX UV+MD
 
CSA B137.5
1/4" - 2" SDR 9

# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd.
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
@ Certified for purple color.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
[1] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the
    fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
    marked, as applicable, with the following fitting system designation(s): ASTM F1807,
    ASTM F2159, ASSE 1061.

Pipe# @ §
 
PEX 5306
 
CanPLUMB
 
ASTM F876/F877
1/4" - 2" SDR 9

# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd.
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
@ Certified for purple color.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.

Pipe@ §
 
PEX 5306
 
CanPLUMB
 
AWWA C904
1/2" - 2" SDR 9

@ Certified for purple color.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.

Pipe# @ ¢ § [1]
 
PEX 5306
 
CanPLUMB
 
CSA B137.5
1/4" - 2" SDR 9

# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd.
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
@ Certified for purple color.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
[1] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the
    fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
    marked, as applicable, with the following fitting system designation(s): ASTM F1807,
    ASTM F2159, ASSE 1061.

Pipe# @ §
 
PEX 5306
 
LYNX-PEX
 
ASTM F876/F877
1/4" - 2" SDR 9

# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd.
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
@ Certified for purple color.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.

Pipe@ §
 
PEX 5306
 
LYNX-PEX
 
AWWA C904
1/2" - 2" SDR 9

@ Certified for purple color.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.

Pipe# @ ¢ § [1]
 
PEX 5306
 
LYNX-PEX
 
CSA B137.5
1/4" - 2" SDR 9

# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd.
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
@ Certified for purple color.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
[1] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the
    fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
    marked, as applicable, with the following fitting system designation(s): ASTM F1807,
    ASTM F2159, ASSE 1061.

Pipe# @ §
 
PEX 5306
 
Radiant Floor Company/DURA-POLY XL
 
ASTM F876/F877
1/4" - 2" SDR 9

# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd.
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
@ Certified for purple color.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.

Pipe@ §
 
PEX 5306
 
Radiant Floor Company/DURA-POLY XL
 
AWWA C904
1/2" - 2" SDR 9

@ Certified for purple color.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.

Pipe# @ ¢ § [1]
 
PEX 5306
 
Radiant Floor Company/DURA-POLY XL
 
CSA B137.5
1/4" - 2" SDR 9

# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd.
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
@ Certified for purple color.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
[1] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the
    fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
    marked, as applicable, with the following fitting system designation(s): ASTM F1807,
    ASTM F2159, ASSE 1061.

Pipe# @ §
 
PEX 5306
 
Vanex
 
ASTM F876/F877
1/4" - 2" SDR 9

# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd.
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
@ Certified for purple color.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.

Pipe@ §
 
PEX 5306
 
Vanex
 
AWWA C904
1/2" - 2" SDR 9

@ Certified for purple color.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.

Pipe# @ ¢ § [1]
 
PEX 5306
 
Vanex
 
CSA B137.5
1/4" - 2" SDR 9

# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd.
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
@ Certified for purple color.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
[1] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the
    fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
    marked, as applicable, with the following fitting system designation(s): ASTM F1807,
    ASTM F2159, ASSE 1061.


Radiant Floor Heating

Product Type   Material Type   Trade Name   Product Standard

Tubing# $ ? @ ^ ~ ¢ §
 
PEX 5306
 
CANFLEX™
 
ASTM F876/F877
3/8" - 2" SDR 9

# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. 
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
  radiant heating system made in accordance with the current version of the ASTM F877
  standard intended for a maximum 100 psi water service and a maximum working temperature
  of 180°F.  System components consist of tubing and/or fittings.  To be installed in
  accordance with manufacturer’s instructions and the latest edition of the Uniform
  Plumbing Code™.
? The UV material type 5306 is only applicable to the red, white, light blue and blue pipe.
@ Certified for red, blue, white and natural colors.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.

Tubing# $ @ ^ ~ ¢ § [1]
 
PEX 5306
 
CANFLEX™
 
CSA B137.5
3/8" - 2" SDR 9

# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. 
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
  radiant heating system made in accordance with the current version of the ASTM F877
  standard intended for a maximum 100 psi water service and a maximum working temperature
  of 180°F.  System components consist of tubing and/or fittings.  To be installed in
  accordance with manufacturer’s instructions and the latest edition of the Uniform
  Plumbing Code™.
@ Certified for red, blue, white and natural colors.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
[1] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the
    fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
    marked, as applicable, with the following fitting system designation(s):  ASTM F1807,
    ASTM F2159, ASSE 1061.

Tubing# $ ? @ ^ ~ §
 
PEX 5306
 
CANPEX™
 
ASTM F876/F877
3/8" - 2" SDR 9

# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. 
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
  radiant heating system made in accordance with the current version of the ASTM F877
  standard intended for a maximum 100 psi water service and a maximum working temperature
  of 180°F.  System components consist of tubing and/or fittings.  To be installed in
  accordance with manufacturer’s instructions and the latest edition of the Uniform
  Plumbing Code™.
? The UV material type 5306 is only applicable to the red, white, light blue and blue pipe.
@ Certified for red, blue, white and natural colors.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.

Tubing# $ @ ^ ~ ¢ § [1]
 
PEX 5306
 
CANPEX™
 
CSA B137.5
3/8" - 2" SDR 9

# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. 
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
  radiant heating system made in accordance with the current version of the ASTM F877
  standard intended for a maximum 100 psi water service and a maximum working temperature
  of 180°F.  System components consist of tubing and/or fittings.  To be installed in
  accordance with manufacturer’s instructions and the latest edition of the Uniform
  Plumbing Code™.
@ Certified for red, blue, white and natural colors.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
[1] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the
    fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
    marked, as applicable, with the following fitting system designation(s):  ASTM F1807,
    ASTM F2159, ASSE 1061.

Tubing! # $ % ^ ~ §
 
PEX 5206
 
CanPEX Barrier
 
ASTM F876/F877
1/4" – 2" SDR 9

! Orange, natural, red, and teal green.
# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. 
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
  radiant heating system made in accordance with the current version of the ASTM F877
  standard intended for a maximum 100 psi water service and a maximum working temperature
  of 180°F.  System components consist of tubing and/or fittings.  To be installed in
  accordance with manufacturer’s instructions and the latest edition of the Uniform
  Plumbing Code™.
% This product is barrier tubing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.

Tubing! # $ % ^ ~ ¢ § [1]
 
PEX 5206
 
CanPEX Barrier
 
CSA B137.5
1/4" – 2" SDR 9

! Orange, natural, red, and teal green.
# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. 
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
  radiant heating system made in accordance with the current version of the ASTM F877
  standard intended for a maximum 100 psi water service and a maximum working temperature
  of 180°F.  System components consist of tubing and/or fittings.  To be installed in
  accordance with manufacturer’s instructions and the latest edition of the Uniform
  Plumbing Code™.
% This product is barrier tubing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
[1] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the
    fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
    marked, as applicable, with the following fitting system designation(s):  ASTM F1807,
    ASTM F2159, ASSE 1061.

Tubing! # $ % ^ ~ §
 
PEX 5206
 
CanPEX OXY Barrier
 
ASTM F876/F877
1/4" - 2" SDR 9

! Orange, natural, red, and teal green.
# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. 
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
  radiant heating system made in accordance with the current version of the ASTM F877
  standard intended for a maximum 100 psi water service and a maximum working temperature
  of 180°F.  System components consist of tubing and/or fittings.  To be installed in
  accordance with manufacturer’s instructions and the latest edition of the Uniform
  Plumbing Code™.
% This product is barrier tubing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.

Tubing! # $ % ^ ~ ¢ § [1]
 
PEX 5206
 
CanPEX OXY Barrier
 
CSA B137.5
1/4" - 2" SDR 9

! Orange, natural, red, and teal green.
# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. 
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
  radiant heating system made in accordance with the current version of the ASTM F877
  standard intended for a maximum 100 psi water service and a maximum working temperature
  of 180°F.  System components consist of tubing and/or fittings.  To be installed in
  accordance with manufacturer’s instructions and the latest edition of the Uniform
  Plumbing Code™.
% This product is barrier tubing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
[1] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the
    fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
    marked, as applicable, with the following fitting system designation(s):  ASTM F1807,
    ASTM F2159, ASSE 1061.

Tubing# $ ^ ~ § µ
 
PEX 5306
 
CanPEX Ultra
 
ASTM F876/F877
3/8" – 2" SDR 9

# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. 
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
  radiant heating system made in accordance with the current version of the ASTM F877
  standard intended for a maximum 100 psi water service and a maximum working temperature
  of 180°F.  System components consist of tubing and/or fittings.  To be installed in
  accordance with manufacturer’s instructions and the latest edition of the Uniform
  Plumbing Code™.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
µ Certified pipe has a black inner layer with a red, white, or blue outer layer.

Tubing# $ ^ ~ ¢ § µ [1]
 
PEX 5306
 
CanPEX Ultra
 
CSA B137.5
3/8" – 2" SDR 9

# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. 
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
  radiant heating system made in accordance with the current version of the ASTM F877
  standard intended for a maximum 100 psi water service and a maximum working temperature
  of 180°F.  System components consist of tubing and/or fittings.  To be installed in
  accordance with manufacturer’s instructions and the latest edition of the Uniform
  Plumbing Code™.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
µ Certified pipe has a black inner layer with a red, white, or blue outer layer.
[1] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the
    fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
    marked, as applicable, with the following fitting system designation(s):  ASTM F1807,
    ASTM F2159, ASSE 1061.

Tubing# $ ? @ ^ ~ §
 
PEX 5306
 
CANPEX™ UV
 
ASTM F876/F877
3/8" - 2" SDR 9

# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. 
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
  radiant heating system made in accordance with the current version of the ASTM F877
  standard intended for a maximum 100 psi water service and a maximum working temperature
  of 180°F.  System components consist of tubing and/or fittings.  To be installed in
  accordance with manufacturer’s instructions and the latest edition of the Uniform
  Plumbing Code™.
? The UV material type 5306 is only applicable to the red, white, light blue and blue pipe.
@ Certified for red, blue, white and natural colors.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.

Tubing# $ ? @ ^ ~ ¢ § [1]
 
PEX 5306
 
CANPEX™ UV
 
CSA B137.5
3/8" - 2" SDR 9

# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. 
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
  radiant heating system made in accordance with the current version of the ASTM F877
  standard intended for a maximum 100 psi water service and a maximum working temperature
  of 180°F.  System components consist of tubing and/or fittings.  To be installed in
  accordance with manufacturer’s instructions and the latest edition of the Uniform
  Plumbing Code™.
? The UV material type 5306 is only applicable to the red, white, light blue and blue pipe.
@ Certified for red, blue, white and natural colors.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
[1] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the
    fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
    marked, as applicable, with the following fitting system designation(s):  ASTM F1807,
    ASTM F2159, ASSE 1061.

Tubing# $ ? @ ^ ~ §
 
PEX 5306
 
CANPEX™ UV +
 
ASTM F876/F877
3/8" - 2" SDR 9

# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. 
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
  radiant heating system made in accordance with the current version of the ASTM F877
  standard intended for a maximum 100 psi water service and a maximum working temperature
  of 180°F.  System components consist of tubing and/or fittings.  To be installed in
  accordance with manufacturer’s instructions and the latest edition of the Uniform
  Plumbing Code™.
? The UV material type 5306 is only applicable to the red, white, light blue and blue pipe.
@ Certified for red, blue, white and natural colors.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.

Tubing# $ ? @ ^ ~ ¢ § [1]
 
PEX 5306
 
CANPEX™ UV +
 
CSA B137.5
3/8" - 2" SDR 9

# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. 
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
  radiant heating system made in accordance with the current version of the ASTM F877
  standard intended for a maximum 100 psi water service and a maximum working temperature
  of 180°F.  System components consist of tubing and/or fittings.  To be installed in
  accordance with manufacturer’s instructions and the latest edition of the Uniform
  Plumbing Code™.
? The UV material type 5306 is only applicable to the red, white, light blue and blue pipe.
@ Certified for red, blue, white and natural colors.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
[1] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the
    fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
    marked, as applicable, with the following fitting system designation(s):  ASTM F1807,
    ASTM F2159, ASSE 1061.

Tubing# $ ? @ ^ ~ §
 
PEX 5306
 
CANPEX™ UV + MD
 
ASTM F876/F877
3/8" - 2" SDR 9

# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. 
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
  radiant heating system made in accordance with the current version of the ASTM F877
  standard intended for a maximum 100 psi water service and a maximum working temperature
  of 180°F.  System components consist of tubing and/or fittings.  To be installed in
  accordance with manufacturer’s instructions and the latest edition of the Uniform
  Plumbing Code™.
? The UV material type 5306 is only applicable to the red, white, light blue and blue pipe.
@ Certified for red, blue, white and natural colors.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.

Tubing# $ ? @ ^ ~ ¢ § [1]
 
PEX 5306
 
CANPEX™ UV + MD
 
CSA B137.5
3/8" - 2" SDR 9

# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. 
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
  radiant heating system made in accordance with the current version of the ASTM F877
  standard intended for a maximum 100 psi water service and a maximum working temperature
  of 180°F.  System components consist of tubing and/or fittings.  To be installed in
  accordance with manufacturer’s instructions and the latest edition of the Uniform
  Plumbing Code™.
? The UV material type 5306 is only applicable to the red, white, light blue and blue pipe.
@ Certified for red, blue, white and natural colors.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
[1] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the
    fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
    marked, as applicable, with the following fitting system designation(s):  ASTM F1807,
    ASTM F2159, ASSE 1061.

Tubing# $ ? @ ^ ~ §
 
PEX 5306
 
CANPEX™ UV Plus
 
ASTM F876/F877
3/8" - 2' SDR 9

# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. 
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
  radiant heating system made in accordance with the current version of the ASTM F877
  standard intended for a maximum 100 psi water service and a maximum working temperature
  of 180°F.  System components consist of tubing and/or fittings.  To be installed in
  accordance with manufacturer’s instructions and the latest edition of the Uniform
  Plumbing Code™.
? The UV material type 5306 is only applicable to the red, white, light blue and blue pipe.
@ Certified for red, blue, white and natural colors.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.

Tubing# $ ? @ ^ ~ ¢ § [1]
 
PEX 5306
 
CANPEX™ UV Plus
 
CSA B137.5
3/8" - 2" SDR 9

# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. 
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
  radiant heating system made in accordance with the current version of the ASTM F877
  standard intended for a maximum 100 psi water service and a maximum working temperature
  of 180°F.  System components consist of tubing and/or fittings.  To be installed in
  accordance with manufacturer’s instructions and the latest edition of the Uniform
  Plumbing Code™.
? The UV material type 5306 is only applicable to the red, white, light blue and blue pipe.
@ Certified for red, blue, white and natural colors.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
[1] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the
    fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
    marked, as applicable, with the following fitting system designation(s):  ASTM F1807,
    ASTM F2159, ASSE 1061.

Tubing# $ ? @ ^ ~ §
 
PEX 5306
 
CANPEX™ UV Plus MD
 
ASTM F876/F877
3/8" - 2" SDR 9

# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. 
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
  radiant heating system made in accordance with the current version of the ASTM F877
  standard intended for a maximum 100 psi water service and a maximum working temperature
  of 180°F.  System components consist of tubing and/or fittings.  To be installed in
  accordance with manufacturer’s instructions and the latest edition of the Uniform
  Plumbing Code™.
? The UV material type 5306 is only applicable to the red, white, light blue and blue pipe.
@ Certified for red, blue, white and natural colors.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.

Tubing# $ ? @ ^ ~ ¢ § [1]
 
PEX 5306
 
CANPEX™ UV Plus MD
 
CSA B137.5
3/8" - 2" SDR 9

# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. 
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
  radiant heating system made in accordance with the current version of the ASTM F877
  standard intended for a maximum 100 psi water service and a maximum working temperature
  of 180°F.  System components consist of tubing and/or fittings.  To be installed in
  accordance with manufacturer’s instructions and the latest edition of the Uniform
  Plumbing Code™.
? The UV material type 5306 is only applicable to the red, white, light blue and blue pipe.
@ Certified for red, blue, white and natural colors.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
[1] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the
    fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
    marked, as applicable, with the following fitting system designation(s):  ASTM F1807,
    ASTM F2159, ASSE 1061.

Tubing# $ ? @ ^ ~ §
 
PEX 5306
 
CANPLUMB™
 
ASTM F876/F877
3/8" - 2" SDR 9

# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. 
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
  radiant heating system made in accordance with the current version of the ASTM F877
  standard intended for a maximum 100 psi water service and a maximum working temperature
  of 180°F.  System components consist of tubing and/or fittings.  To be installed in
  accordance with manufacturer’s instructions and the latest edition of the Uniform
  Plumbing Code™.
? The UV material type 5306 is only applicable to the red, white, light blue and blue pipe.
@ Certified for red, blue, white and natural colors.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.

Tubing# $ @ ^ ~ ¢ § [1]
 
PEX 5306
 
CANPLUMB™
 
CSA B137.5
3/8" - 2" SDR 9

# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. 
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
  radiant heating system made in accordance with the current version of the ASTM F877
  standard intended for a maximum 100 psi water service and a maximum working temperature
  of 180°F.  System components consist of tubing and/or fittings.  To be installed in
  accordance with manufacturer’s instructions and the latest edition of the Uniform
  Plumbing Code™.
@ Certified for red, blue, white and natural colors.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
[1] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the
    fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
    marked, as applicable, with the following fitting system designation(s):  ASTM F1807,
    ASTM F2159, ASSE 1061.

Tubing! # $ % ^ ~ §
 
PEX 5206
 
CanRay
 
ASTM F876/F877
1/4" – 2" SDR 9

! Orange, natural, red, and teal green.
# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. 
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
  radiant heating system made in accordance with the current version of the ASTM F877
  standard intended for a maximum 100 psi water service and a maximum working temperature
  of 180°F.  System components consist of tubing and/or fittings.  To be installed in
  accordance with manufacturer’s instructions and the latest edition of the Uniform
  Plumbing Code™.
% This product is barrier tubing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.

Tubing! # $ % ^ ~ ¢ § [1]
 
PEX 5206
 
CanRay
 
CSA B137.5
1/4" – 2" SDR 9

! Orange, natural, red, and teal green.
# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. 
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
  radiant heating system made in accordance with the current version of the ASTM F877
  standard intended for a maximum 100 psi water service and a maximum working temperature
  of 180°F.  System components consist of tubing and/or fittings.  To be installed in
  accordance with manufacturer’s instructions and the latest edition of the Uniform
  Plumbing Code™.
% This product is barrier tubing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
[1] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the
    fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
    marked, as applicable, with the following fitting system designation(s):  ASTM F1807,
    ASTM F2159, ASSE 1061.

Tubing! # $ % ^ ~ § Þ
 
PEX 5206
 
Embassy / LiquiPEX w/O2 Barrier
 
ASTM F876/F877
1/4" – 2" SDR 9

! Orange, natural, red, and teal green.
# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. 
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
  radiant heating system made in accordance with the current version of the ASTM F877
  standard intended for a maximum 100 psi water service and a maximum working temperature
  of 180°F.  System components consist of tubing and/or fittings.  To be installed in
  accordance with manufacturer’s instructions and the latest edition of the Uniform
  Plumbing Code™.
% This product is barrier tubing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
Þ Product is Certified to the International Plumbing Code. Installation in accordance with
  the manufacturer's instructions and the requirements of the latest edition of the
  International Plumbing Code.

Tubing! # $ % ^ ~ ¢ § Þ [1]
 
PEX 5206
 
Embassy / LiquiPEX w/O2 Barrier
 
CSA B137.5
1/4" – 2" SDR 9

! Orange, natural, red, and teal green.
# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. 
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
  radiant heating system made in accordance with the current version of the ASTM F877
  standard intended for a maximum 100 psi water service and a maximum working temperature
  of 180°F.  System components consist of tubing and/or fittings.  To be installed in
  accordance with manufacturer’s instructions and the latest edition of the Uniform
  Plumbing Code™.
% This product is barrier tubing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
Þ Product is Certified to the International Plumbing Code. Installation in accordance with
  the manufacturer's instructions and the requirements of the latest edition of the
  International Plumbing Code.
[1] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the
    fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
    marked, as applicable, with the following fitting system designation(s):  ASTM F1807,
    ASTM F2159, ASSE 1061.

Tubing# $ ? @ ^ ~ §
 
PEX 5306
 
LYNX-PEX
 
ASTM F876/F877
1/4" - 2" SDR 9

# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. 
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
  radiant heating system made in accordance with the current version of the ASTM F877
  standard intended for a maximum 100 psi water service and a maximum working temperature
  of 180°F.  System components consist of tubing and/or fittings.  To be installed in
  accordance with manufacturer’s instructions and the latest edition of the Uniform
  Plumbing Code™.
? The UV material type 5306 is only applicable to the red, white, light blue and blue pipe.
@ Certified for red, blue, white and natural colors.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.

Tubing? @ ^ ~ §
 
PEX 5306
 
LYNX-PEX
 
AWWA C904
1/2" - 2" SDR 9

? The UV material type 5306 is only applicable to the red, white, light blue and blue pipe.
@ Certified for red, blue, white and natural colors.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.

Tubing# $ ? @ ^ ~ ¢ § [1]
 
PEX 5306
 
LYNX-PEX
 
CSA B137.5
1/4" - 2" SDR 9

# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. 
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
  radiant heating system made in accordance with the current version of the ASTM F877
  standard intended for a maximum 100 psi water service and a maximum working temperature
  of 180°F.  System components consist of tubing and/or fittings.  To be installed in
  accordance with manufacturer’s instructions and the latest edition of the Uniform
  Plumbing Code™.
? The UV material type 5306 is only applicable to the red, white, light blue and blue pipe.
@ Certified for red, blue, white and natural colors.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
[1] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the
    fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
    marked, as applicable, with the following fitting system designation(s):  ASTM F1807,
    ASTM F2159, ASSE 1061.

Tubing# $ ? @ ^ ~
 
PEX 5306
 
Radiant Floor Company/ DURA-POLY XL
 
ASTM F876/F877
3/8" - 2" SDR 9

# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. 
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
  radiant heating system made in accordance with the current version of the ASTM F877
  standard intended for a maximum 100 psi water service and a maximum working temperature
  of 180°F.  System components consist of tubing and/or fittings.  To be installed in
  accordance with manufacturer’s instructions and the latest edition of the Uniform
  Plumbing Code™.
? The UV material type 5306 is only applicable to the red, white, light blue and blue pipe.
@ Certified for red, blue, white and natural colors.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.

Tubing# $ ? @ ^ ~ ¢ § [1]
 
PEX 5306
 
Radiant Floor Company/ DURA-POLY XL
 
CSA B137.5
3/8" - 2" SDR 9

# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. 
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
  radiant heating system made in accordance with the current version of the ASTM F877
  standard intended for a maximum 100 psi water service and a maximum working temperature
  of 180°F.  System components consist of tubing and/or fittings.  To be installed in
  accordance with manufacturer’s instructions and the latest edition of the Uniform
  Plumbing Code™.
? The UV material type 5306 is only applicable to the red, white, light blue and blue pipe.
@ Certified for red, blue, white and natural colors.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
[1] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the
    fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
    marked, as applicable, with the following fitting system designation(s):  ASTM F1807,
    ASTM F2159, ASSE 1061.

Tubing! # $ % ^ ~ §
 
PEX 5206
 
Radiant Floor Company/ DURA-POLY XL
 
ASTM F876/F877
1/4" - 2" SDR 9

! Orange, natural, red, and teal green.
# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. 
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
  radiant heating system made in accordance with the current version of the ASTM F877
  standard intended for a maximum 100 psi water service and a maximum working temperature
  of 180°F.  System components consist of tubing and/or fittings.  To be installed in
  accordance with manufacturer’s instructions and the latest edition of the Uniform
  Plumbing Code™.
% This product is barrier tubing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.

Tubing! # $ % ^ ~ ¢ § [1]
 
PEX 5206
 
Radiant Floor Company/ DURA-POLY XL
 
CSA B137.5
1/4" - 2" SDR 9

! Orange, natural, red, and teal green.
# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. 
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
  radiant heating system made in accordance with the current version of the ASTM F877
  standard intended for a maximum 100 psi water service and a maximum working temperature
  of 180°F.  System components consist of tubing and/or fittings.  To be installed in
  accordance with manufacturer’s instructions and the latest edition of the Uniform
  Plumbing Code™.
% This product is barrier tubing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
[1] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the
    fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
    marked, as applicable, with the following fitting system designation(s):  ASTM F1807,
    ASTM F2159, ASSE 1061.

Tubing! # $ % ^ ~ §
 
PEX 5206
 
Radiantec Company Inc. / Radiantec
 
ASTM F876/F877
1/2" - 3/4" SDR 9

! Orange, natural, red, and teal green.
# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. 
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
  radiant heating system made in accordance with the current version of the ASTM F877
  standard intended for a maximum 100 psi water service and a maximum working temperature
  of 180°F.  System components consist of tubing and/or fittings.  To be installed in
  accordance with manufacturer’s instructions and the latest edition of the Uniform
  Plumbing Code™.
% This product is barrier tubing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.

Tubing! # $ % ^ ~ §
 
PEX 5206
 
RadiantMax
 
ASTM F876/F877
1/4" – 2" SDR 9

! Orange, natural, red, and teal green.
# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. 
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
  radiant heating system made in accordance with the current version of the ASTM F877
  standard intended for a maximum 100 psi water service and a maximum working temperature
  of 180°F.  System components consist of tubing and/or fittings.  To be installed in
  accordance with manufacturer’s instructions and the latest edition of the Uniform
  Plumbing Code™.
% This product is barrier tubing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.

Tubing! # $ % ^ ~ ¢ § [1]
 
PEX 5206
 
RadiantMax
 
CSA B137.5
1/4" – 2" SDR 9

! Orange, natural, red, and teal green.
# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. 
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
  radiant heating system made in accordance with the current version of the ASTM F877
  standard intended for a maximum 100 psi water service and a maximum working temperature
  of 180°F.  System components consist of tubing and/or fittings.  To be installed in
  accordance with manufacturer’s instructions and the latest edition of the Uniform
  Plumbing Code™.
% This product is barrier tubing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
[1] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the
    fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
    marked, as applicable, with the following fitting system designation(s):  ASTM F1807,
    ASTM F2159, ASSE 1061.

Tubing# $ ? @ ^ ~ §
 
PEX 5306
 
Vanex
 
ASTM F876/F877
3/8" - 2" SDR 9

# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. 
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
  radiant heating system made in accordance with the current version of the ASTM F877
  standard intended for a maximum 100 psi water service and a maximum working temperature
  of 180°F.  System components consist of tubing and/or fittings.  To be installed in
  accordance with manufacturer’s instructions and the latest edition of the Uniform
  Plumbing Code™.
? The UV material type 5306 is only applicable to the red, white, light blue and blue pipe.
@ Certified for red, blue, white and natural colors.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.

Tubing# $ @ ^ ~ ¢ § [1]
 
PEX 5306
 
Vanex
 
CSA B137.5
3/8" - 2" SDR 9

# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. 
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
  radiant heating system made in accordance with the current version of the ASTM F877
  standard intended for a maximum 100 psi water service and a maximum working temperature
  of 180°F.  System components consist of tubing and/or fittings.  To be installed in
  accordance with manufacturer’s instructions and the latest edition of the Uniform
  Plumbing Code™.
@ Certified for red, blue, white and natural colors.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
[1] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the
    fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
    marked, as applicable, with the following fitting system designation(s):  ASTM F1807,
    ASTM F2159, ASSE 1061.

Tubing! # $ % ^ ~ §
 
PEX 5206
 
Vanex Barrier
 
ASTM F876/F877
1/4" – 2" SDR 9

! Orange, natural, red, and teal green.
# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. 
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
  radiant heating system made in accordance with the current version of the ASTM F877
  standard intended for a maximum 100 psi water service and a maximum working temperature
  of 180°F.  System components consist of tubing and/or fittings.  To be installed in
  accordance with manufacturer’s instructions and the latest edition of the Uniform
  Plumbing Code™.
% This product is barrier tubing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.

Tubing! # $ % ^ ~ ¢ § [1]
 
PEX 5206
 
Vanex Barrier
 
CSA B137.5
1/4" – 2" SDR 9

! Orange, natural, red, and teal green.
# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. 
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
  radiant heating system made in accordance with the current version of the ASTM F877
  standard intended for a maximum 100 psi water service and a maximum working temperature
  of 180°F.  System components consist of tubing and/or fittings.  To be installed in
  accordance with manufacturer’s instructions and the latest edition of the Uniform
  Plumbing Code™.
% This product is barrier tubing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
[1] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the
    fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
    marked, as applicable, with the following fitting system designation(s):  ASTM F1807,
    ASTM F2159, ASSE 1061.

Tubing# $ ^ ~ § µ
 
PEX 5306
 
Vanex Ultra
 
ASTM F876/F877
3/8" – 2" SDR 9

# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. 
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
  radiant heating system made in accordance with the current version of the ASTM F877
  standard intended for a maximum 100 psi water service and a maximum working temperature
  of 180°F.  System components consist of tubing and/or fittings.  To be installed in
  accordance with manufacturer’s instructions and the latest edition of the Uniform
  Plumbing Code™.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
µ Certified pipe has a black inner layer with a red, white, or blue outer layer.

Tubing# $ ^ ~ ¢ § µ [1]
 
PEX 5306
 
Vanex Ultra
 
CSA B137.5
3/8" – 2" SDR 9

# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. 
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
  radiant heating system made in accordance with the current version of the ASTM F877
  standard intended for a maximum 100 psi water service and a maximum working temperature
  of 180°F.  System components consist of tubing and/or fittings.  To be installed in
  accordance with manufacturer’s instructions and the latest edition of the Uniform
  Plumbing Code™.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
µ Certified pipe has a black inner layer with a red, white, or blue outer layer.
[1] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the
    fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
    marked, as applicable, with the following fitting system designation(s):  ASTM F1807,
    ASTM F2159, ASSE 1061.



 
Cirque Sales & Distribution, Inc 
13504 Northeast 84th Street
Suite 103-267 
Vancover, WA 98682 
United States 
888-710-6667 
360-326-7003

Facility : # 1 USA

Potable Water - Pipe and Fittings

Product Type   Material Type   Trade Name   Product Standard

Pipe* ^ § +++ [G]
 
PEX 1306
 
SafePEX® Pro Blue UV-Shield
 
ASTM F876/F877
3/8" - 2" SDR 9

* Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Pipe* ^ ¢ § +++ [G]
 
PEX
 
SafePEX® Pro Blue UV-Shield
 
CSA B137.5
3/8" - 2" SDR 9

* Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Pipe* ^ § +++ [G]
 
PEX 1306
 
SafePEX® Pro Red UV-Shield
 
ASTM F876/F877
3/8" - 2" SDR 9

* Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Pipe* ^ ¢ § +++ [G]
 
PEX
 
SafePEX® Pro Red UV-Shield
 
CSA B137.5
3/8" - 2" SDR 9

* Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Pipe* ^ § +++ [G]
 
PEX 1306
 
SafePEX® Pro White UV-Shield
 
ASTM F876/F877
3/8" - 2" SDR 9

* Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Pipe* ^ ¢ § +++ [G]
 
PEX
 
SafePEX® Pro White UV-Shield
 
CSA B137.5
3/8" - 2" SDR 9

* Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

$ Non-barrier pipe.


 
Elkhart Supply Corporation 
1126 Kent Street
Elkhart, IN 46514-1740 
United States 
574-264-4156

Facility : # 1 USA

Potable Water - Pipe and Fittings

Product Type   Material Type   Trade Name   Product Standard

Pipe* ^ § +++ [G]
 
PEX 1306
 
SafePEX® Pro Blue UV-Shield
 
ASTM F876/F877
3/8" - 2" SDR 9

* Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Pipe* ^ ¢ § +++ [G]
 
PEX
 
SafePEX® Pro Blue UV-Shield
 
CSA B137.5
3/8" - 2" SDR 9

* Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Pipe* ^ § +++ [G]
 
PEX 1306
 
SafePEX® Pro Red UV-Shield
 
ASTM F876/F877
3/8" - 2" SDR 9

* Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Pipe* ^ ¢ § +++ [G]
 
PEX
 
SafePEX® Pro Red UV-Shield
 
CSA B137.5
3/8" - 2" SDR 9

* Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Pipe* ^ § +++ [G]
 
PEX 1306
 
SafePEX® Pro White UV-Shield
 
ASTM F876/F877
3/8" - 2" SDR 9

* Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Pipe* ^ ¢ § +++ [G]
 
PEX
 
SafePEX® Pro White UV-Shield
 
CSA B137.5
3/8" - 2" SDR 9

* Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

$ Non-barrier pipe.


 
Embassy Industries, Inc. 
10 Hub Drive
Melville, NY 11747 
United States 
631-694-1800
Visit this company's website

Facility : Middlefield, OH

Radiant Floor Heating

Product Type   Material Type   Trade Name   Product Standard

Tubing# * @ ^ ¢ §
 
PEX 5006
 
Embassy LiquiPEX
 
ASTM F876/F877
3/8" - 1" SDR 9

# Authorized for blue, gray, natural, orange, red, and white.
* Product is barrier tubing.
@ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.

Tubing# & * @ ¢
 
PEX
 
Embassy LiquiPEX
 
CSA B137.5
3/8" - 1" SDR 9

# Authorized for blue, gray, natural, orange, red, and white.
& Tubing certified against CSA B137.5 shall include the standard designation(s) of the
  fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
  marked, if applicable, with the following fitting system designations:  ASTM F1807, ASTM
  F2159, ASTM F2098, ASTM F2080, ASSE 1061 and ASTM F1960.
* Product is barrier tubing.
@ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.



 
Everflow Supplies Inc. 
100 Middlesex Avenue
Carteret, NJ 07008 
United States 
908-436-1100

Facility : Foshan, China

Potable Water - Pipe and Fittings

Product Type   Material Type   Trade Name   Product Standard

Tubing$ * ^ § +++ [G]
 
PEX 5006
 
PEXFLOW™
 
ASTM F876/F877
>= 1/8" SDR 9

$ Certified for blue and red without oxygen barrier.
* Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Tubing$ * ^ § +++ [3] [G]
 
PEX
 
PEXFLOW™
 
CSA B137.5
>= 1/8" SDR 9

$ Certified for blue and red without oxygen barrier.
* Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[3] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the
    fitting system(s) for which the tubing is recommended by the manufacturer, and shall be 
    marked with the following fitting system designations:  ASTM F1807, ASTM F2159, ASTM
    F1960, F2098.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Tubing$ * ^ § +++
 
PEX 5006
 
PEXFLOW™
 
ASTM F876/F877
1/2" - 1" SDR 9

$ Certified for blue and red without oxygen barrier.
* Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Tubing$ * ^ ¢ § +++
 
PEX
 
PEXFLOW™
 
CSA B137.5
1/2" - 1" SDR 9

$ Certified for blue and red without oxygen barrier.
* Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Tubing& * ^ ~ ¢ +++ [G]
 
PEX 5106[6]
 
Everflow
 
CSA B137.5

>= 1/8" SDR 9
PFW-R12100   PFW-B12100   PFW-W12100   PFW-R12300  
PFW-B12300   PFW-W12300   PFW-R12500   PFW-B12500  
PFW-W12500   PFW-R34100   PFW-B34100   PFW-W34100  
PFW-R34300   PFW-B34300   PFW-W34300   PFW-R34500  
PFW-B34500   PFW-W34500   PFW-B1100   PFW-R1100  
PFW-W1100   PFW-R1300   PFW-B1300   PFW-W1300  
PFW-R1500   PFW-B1500   PFW-W1500   PFW-R1220  
PFW-B1220   PFW-W1220   PFW-R3420   PFW-B3420  
PFW-W3420   PFW-R120   PFW-B120   PFW-W120  
PFW-R1210   PFW-B1210   PFW-W1210   PFW-R3410  
PFW-B3410   PFW-W3410   PFW-R110   PFW-B110  
PFW-W110  

& Meets the chlorine resistance requirements of ASTM F1281 when tested in accordance with
  ASTM F2023.
* Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
~ Certified for Natural non-barrier single layer tubing for 1/8 - 3" sizes. Certified for
  red, white, blue 2-layer tubing for 1/2", 5/8", 3/4", 1" sizes only.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[6] Certified for red and white PEX 5106 monowall pipe.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Tubing* ^ ¢ +++ [G]
 
PEX 5106[6]
 
Everflow
 
ASTM F876/877

>= 1/8" SDR 9
PFW-R12100   PFW-B12100   PFW-W12100   PFW-R12300  
PFW-B12300   PFW-W12300   PFW-R12500   PFW-B12500  
PFW-W12500   PFW-R34100   PFW-B34100   PFW-W34100  
PFW-R34300   PFW-B34300   PFW-W34300   PFW-R34500  
PFW-B34500   PFW-W34500   PFW-B1100   PFW-R1100  
PFW-W1100   PFW-R1300   PFW-B1300   PFW-W1300  
PFW-R1500   PFW-B1500   PFW-W1500   PFW-R1220  
PFW-B1220   PFW-W1220   PFW-R3420   PFW-B3420  
PFW-W3420   PFW-R120   PFW-B120   PFW-W120  
PFW-R1210   PFW-B1210   PFW-W1210   PFW-R3410  
PFW-B3410   PFW-W3410   PFW-R110   PFW-B110  
PFW-W110  

* Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[6] Certified for red and white PEX 5106 monowall pipe.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Fittings[4] [G]
 
PEX
 
Everflow
 
ASTM F1960

PEX Ring with Stop
3/8" - 2"  

[4] This is a PEX sleeve certified to ASTM F1960 & CSA B137.5. This is a non wetted product.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Fittings[4] [G]
 
PEX
 
Everflow
 
CSA B137.5

PEX Ring with Stop
3/8" - 2"  

[4] This is a PEX sleeve certified to ASTM F1960 & CSA B137.5. This is a non wetted product.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Tubing! * ^ § +++ [G]
 
PEX 5106
 
Everflow
 
ASTM F876/877

1/8" - 6" SDR 9
PFW-R12100   PFW-B12100   PFW-W12100   PFW-R12300  
PFW-B12300   PFW-W12300   PFW-R12500   PFW-B12500  
PFW-W12500   PFW-R34100   PFW-B34100   PFW-W34100  
PFW-R34300   PFW-B34300   PFW-W34300   PFW-R34500  
PFW-B34500   PFW-W34500   PFW-B1100   PFW-R1100  
PFW-W1100   PFW-R1300   PFW-B1300   PFW-W1300  
PFW-R1500   PFW-B1500   PFW-W1500   PFW-R1220  
PFW-B1220   PFW-W1220   PFW-R3420   PFW-B3420  
PFW-W3420   PFW-R120   PFW-B120   PFW-W120  
PFW-R1210   PFW-B1210   PFW-W1210   PFW-R3410  
PFW-B3410   PFW-W3410   PFW-R110   PFW-B110  
PFW-W110  

! Certified for natural, red, white and blue without oxygen barrier.
  Natural - 5006
  Red, white, blue - 5006, 5106, 5206
* Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Tubing! * ^ § +++ [G]
 
PEX 5106
 
Everflow
 
CSA B137.5

1/8" - 6" SDR 9
PFW-R12100   PFW-B12100   PFW-W12100   PFW-R12300  
PFW-B12300   PFW-W12300   PFW-R12500   PFW-B12500  
PFW-W12500   PFW-R34100   PFW-B34100   PFW-W34100  
PFW-R34300   PFW-B34300   PFW-W34300   PFW-R34500  
PFW-B34500   PFW-W34500   PFW-B1100   PFW-R1100  
PFW-W1100   PFW-R1300   PFW-B1300   PFW-W1300  
PFW-R1500   PFW-B1500   PFW-W1500   PFW-R1220  
PFW-B1220   PFW-W1220   PFW-R3420   PFW-B3420  
PFW-W3420   PFW-R120   PFW-B120   PFW-W120  
PFW-R1210   PFW-B1210   PFW-W1210   PFW-R3410  
PFW-B3410   PFW-W3410   PFW-R110   PFW-B110  
PFW-W110  

! Certified for natural, red, white and blue without oxygen barrier.
  Natural - 5006
  Red, white, blue - 5006, 5106, 5206
* Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Tubing* ^ ¢ +++ [G]
 
PEX 5106[7]
 
Everflow
 
ASTM F876/877

3/8" - 1"
PFW-R12100   PFW-B12100   PFW-W12100   PFW-R12300  
PFW-B12300   PFW-W12300   PFW-R12500   PFW-B12500  
PFW-W12500   PFW-R34100   PFW-B34100   PFW-W34100  
PFW-R34300   PFW-B34300   PFW-W34300   PFW-R34500  
PFW-B34500   PFW-W34500   PFW-B1100   PFW-R1100  
PFW-W1100   PFW-R1300   PFW-B1300   PFW-W1300  
PFW-R1500   PFW-B1500   PFW-W1500   PFW-R1220  
PFW-B1220   PFW-W1220   PFW-R3420   PFW-B3420  
PFW-W3420   PFW-R120   PFW-B120   PFW-W120  
PFW-R1210   PFW-B1210   PFW-W1210   PFW-R3410  
PFW-B3410   PFW-W3410   PFW-R110   PFW-B110  
PFW-W110  

* Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[7] Certified for the following:
    2-layer skinned (Natural PEX – White PE) pipe [PEX 5106]: 3/8", 1/2", 5/8",3/4" & 1"
    2-layer skinned (Natural PEX – Red, White or Blue PE) pipe [PEX 5306]: 3/8", 1/2",
    5/8",3/4" & 1"
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Tubing* ^ ~ ¢ +++ [G]
 
PEX 5106[8]
 
Everflow
 
ASTM F876/877
1/2", 5/8", 3/4", 1"

* Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
~ Certified for Natural non-barrier single layer tubing for 1/8 - 3" sizes. Certified for
  red, white, blue 2-layer tubing for 1/2", 5/8", 3/4", 1" sizes only.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[8] PEX 5106 Certified for Red, Blue ,White 2-layer for 1/2", 5/8", 3/4", 1" sizes only.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Tubing* ^ ~ ¢ +++ [5] [G]
 
PEX 5106[8]
 
Everflow
 
CSA B137.5
1/2", 5/8", 3/4", 1"

* Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
~ Certified for Natural non-barrier single layer tubing for 1/8 - 3" sizes. Certified for
  red, white, blue 2-layer tubing for 1/2", 5/8", 3/4", 1" sizes only.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[5] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the
    fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
    marked with the following fitting system designations:  ASTM F1807, ASTM F2159.
[8] PEX 5106 Certified for Red, Blue ,White 2-layer for 1/2", 5/8", 3/4", 1" sizes only.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Tubing& * ^ ~ ¢ +++ [5] [G]
 
PEX 5006
 
Everflow
 
CSA B137.5
1/8" - 3"

& Meets the chlorine resistance requirements of ASTM F1281 when tested in accordance with
  ASTM F2023.
* Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
~ Certified for Natural non-barrier single layer tubing for 1/8 - 3" sizes. Certified for
  red, white, blue 2-layer tubing for 1/2", 5/8", 3/4", 1" sizes only.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[5] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the
    fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
    marked with the following fitting system designations:  ASTM F1807, ASTM F2159.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    


Radiant Floor Heating

Product Type   Material Type   Trade Name   Product Standard

Tubing& * ^ ~ ¢ +++
 
PEX 5106[7] [8]
 
Everflow
 
CSA B137.5
PFR-R1100
PFR-R120
PFR-R12100
PFR-R121000
PFR-R121200
PFR-R1220
PFR-R12300
PFR-R12500
PFR-R1300
PFR-R1500
PFR-R34100
PFR-R341000
PFR-R3420
PFR-R34300
PFR-R34500
PFR-R38100
PFR-R38300
PFR-R58100
PFR-R58500

& Meets the chlorine resistance requirements of ASTM F1281 when tested in accordance with
  ASTM F2023.
* Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with  
  ASTM F2023.
~ Certified for Natural non-barrier single layer tubing for 1/8 - 3" sizes. Certified for
  red, white, blue 2-layer tubing for 1/2", 5/8", 3/4", 1" sizes only. Certified for red,
  white, blue, orange,natural 3-layer tubing for 1/2", 5/8", 3/4", 1" sizes only.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[7] Certified for red and white PEX 5106 monowall pipe.
[8] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the
    fitting system(s) for which the tubing is recommended by the manufacturer and shall be
    marked with the following fitting system designations: ASTM F1807, ASTM F2159, ASTM
    F1960, ASTM F2080, ASTM F2098 and ASSE 1061.

Tubing* ^ ¢ +++
 
PEX 5106[7]
 
Everflow
 
ASTM F876/877

>= 1/8"
PFR-R1100   PFR-R120   PFR-R12100   PFR-R121000  
PFR-R121200   PFR-R1220   PFR-R12300   PFR-R12500  
PFR-R1300   PFR-R1500   PFR-R34100   PFR-R341000  
PFR-R3420   PFR-R34300   PFR-R34500   PFR-R38100  
PFR-R38300   PFR-R58100   PFR-R58500  

* Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with  
  ASTM F2023.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[7] Certified for red and white PEX 5106 monowall pipe.

Fittings[6]
 
PEX
 
Everflow
 
ASTM F1960

PEX Ring with Stop
3/8" - 2"  

[6] This is a PEX sleeve certified to ASTM F1960 & CSA B137.5. This is a non wetted product.

Fittings[6]
 
PEX
 
Everflow
 
CSA B137.5

PEX Ring with Stop
3/8" - 2"  

[6] This is a PEX sleeve certified to ASTM F1960 & CSA B137.5. This is a non wetted product.

Tubing$ * ¢ § [8]
 
PEX
 
Everflow
 
CSA B137.5

>= 1/8" SDR 9
PFR-R1100   PFR-R120   PFR-R12100   PFR-R121000  
PFR-R121200   PFR-R1220   PFR-R12300   PFR-R12500  
PFR-R1300   PFR-R1500   PFR-R34100   PFR-R341000  
PFR-R3420   PFR-R34300   PFR-R34500   PFR-R38100  
PFR-R38300   PFR-R58100   PFR-R58500  

$ Certified for blue and red with oxygen barrier.
* Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
[8] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the
    fitting system(s) for which the tubing is recommended by the manufacturer and shall be
    marked with the following fitting system designations: ASTM F1807, ASTM F2159, ASTM
    F1960, ASTM F2080, ASTM F2098 and ASSE 1061.

Tubing! * ^ §
 
PEX 5106
 
Everflow
 
ASTM F876/877

>= 1/8" SDR 9
PFR-R1100   PFR-R120   PFR-R12100   PFR-R121000  
PFR-R121200   PFR-R1220   PFR-R12300   PFR-R12500  
PFR-R1300   PFR-R1500   PFR-R34100   PFR-R341000  
PFR-R3420   PFR-R34300   PFR-R34500   PFR-R38100  
PFR-R38300   PFR-R58100   PFR-R58500  

! Certified for natural, red, white and blue without oxygen barrier.
  Natural - 5006
  Red, white, blue - 5006, 5106, 5206
* Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with  
  ASTM F2023.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.

Tubing! * ^ §
 
PEX 5106
 
Everflow
 
AWWA C904

1/2" - 1 1/2" SDR 9
PFR-R1100   PFR-R120   PFR-R12100   PFR-R121000  
PFR-R121200   PFR-R1220   PFR-R12300   PFR-R12500  
PFR-R1300   PFR-R1500   PFR-R34100   PFR-R341000  
PFR-R3420   PFR-R34300   PFR-R34500   PFR-R38100  
PFR-R38300   PFR-R58100   PFR-R58500  

! Certified for natural, red, white and blue without oxygen barrier.
  Natural - 5006
  Red, white, blue - 5006, 5106, 5206
* Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with  
  ASTM F2023.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.

Tubing! * ^ §
 
PEX 5106
 
Everflow
 
CSA B137.5

>= 1/8" SDR 9
PFR-R1100   PFR-R120   PFR-R12100   PFR-R121000  
PFR-R121200   PFR-R1220   PFR-R12300   PFR-R12500  
PFR-R1300   PFR-R1500   PFR-R34100   PFR-R341000  
PFR-R3420   PFR-R34300   PFR-R34500   PFR-R38100  
PFR-R38300   PFR-R58100   PFR-R58500  

! Certified for natural, red, white and blue without oxygen barrier.
  Natural - 5006
  Red, white, blue - 5006, 5106, 5206
* Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with  
  ASTM F2023.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.

Tubing* ^ ~ ¢ +++ [G]
 
PEX 5006
 
Everflow
 
ASTM F876/877
1/8" - 3"

* Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with  
  ASTM F2023.
~ Certified for Natural non-barrier single layer tubing for 1/8 - 3" sizes. Certified for
  red, white, blue 2-layer tubing for 1/2", 5/8", 3/4", 1" sizes only. Certified for red,
  white, blue, orange,natural 3-layer tubing for 1/2", 5/8", 3/4", 1" sizes only.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Tubing* ^ ~ ¢ +++ [G]
 
PEX 5106[5]
 
Everflow
 
ASTM F876/877
1/2", 5/8", 3/4", 1"

* Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with  
  ASTM F2023.
~ Certified for Natural non-barrier single layer tubing for 1/8 - 3" sizes. Certified for
  red, white, blue 2-layer tubing for 1/2", 5/8", 3/4", 1" sizes only. Certified for red,
  white, blue, orange,natural 3-layer tubing for 1/2", 5/8", 3/4", 1" sizes only.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[5] PEX 5106 Certified for Red, Blue ,White 2-layer for 1/2", 5/8", 3/4", 1" sizes only.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Tubing* ^ ~ ¢ +++ [G]
 
PEX 5006[4]
 
Everflow
 
CSA B137.5
1/8" - 3"

* Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with  
  ASTM F2023.
~ Certified for Natural non-barrier single layer tubing for 1/8 - 3" sizes. Certified for
  red, white, blue 2-layer tubing for 1/2", 5/8", 3/4", 1" sizes only. Certified for red,
  white, blue, orange,natural 3-layer tubing for 1/2", 5/8", 3/4", 1" sizes only.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[4] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the
    fitting system(s) for which the tubing is recommended by the manufacturer, and shall be 
    marked with the following fitting system designations:  ASTM F1807, ASTM F2159, ASTM
    F1960, F2098.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Tubing* ^ ~ ¢ +++ [5] [G]
 
PEX 5106[4]
 
Everflow
 
CSA B137.5
1/2", 5/8", 3/4", 1"

* Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with  
  ASTM F2023.
~ Certified for Natural non-barrier single layer tubing for 1/8 - 3" sizes. Certified for
  red, white, blue 2-layer tubing for 1/2", 5/8", 3/4", 1" sizes only. Certified for red,
  white, blue, orange,natural 3-layer tubing for 1/2", 5/8", 3/4", 1" sizes only.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[4] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the
    fitting system(s) for which the tubing is recommended by the manufacturer, and shall be 
    marked with the following fitting system designations:  ASTM F1807, ASTM F2159, ASTM
    F1960, F2098.
[5] PEX 5106 Certified for Red, Blue ,White 2-layer for 1/2", 5/8", 3/4", 1" sizes only.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Tubing$ * §
 
PEX 5006
 
PEXFLOW™
 
ASTM F876/F877
1/2" - 1" SDR 9

$ Certified for blue and red with oxygen barrier.
* Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.

Tubing$ * ¢ §
 
PEX
 
PEXFLOW™
 
CSA B137.5
1/2" - 1" SDR 9

$ Certified for blue and red with oxygen barrier.
* Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.

Tubing$ * §
 
PEX 5006
 
PEXFLOW™
 
ASTM F876/F877
>= 1/8" SDR 9

$ Certified for blue and red with oxygen barrier.
* Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.

Tubing$ * ¢ § [4]
 
PEX
 
PEXFLOW™
 
CSA B137.5
>= 1/8" SDR 9

$ Certified for blue and red with oxygen barrier.
* Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
[4] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the
    fitting system(s) for which the tubing is recommended by the manufacturer, and shall be 
    marked with the following fitting system designations:  ASTM F1807, ASTM F2159, ASTM
    F1960, F2098.

Tubing$ * §
 
PEX 5006
 
PEXFLOW™
 
ASTM F876/F877
>= 1/8" SDR 9

$ Certified for blue and red with oxygen barrier.
* Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.



 
Everflow Supplies, Inc. 
100 Middlesex Avenue
Carteret, NJ 07008 
United States 
877-941-7800 
908-436-1100
Visit this company's website

Facility : Barcelona, Spain

Potable Water - Pipe and Fittings

Product Type   Material Type   Trade Name   Product Standard

Pipe* @ ¢ § +++ [G]
 
PEX 5106
 
PEXFLOW
 
ASTM F876/F877
3/8" - 2"

* Natural (Solid Wall) PEX Pipe Certified 3/8" - 2"sizes. Red, blue, white or orange PEX
  pipe (2
  layer pipe - natural with colored adhesive pipe) certified for 3/8" - 1" sizes. Tubing
  certified
  against CSA B137.5 shall include the standard designation(s) of the fitting system(s)
  for which the
  tubing is recommended by the manufacturer, and shall be marked, as applicable, with the
  following
  fitting system designation(s): ASTM F1960, ASTM F1807, ASTM F2159, and ASTM F2098.
@ PEX 5106: Meets the chlorine resistance requirements of ASTM F876 when tested in
  accordance with ASTM F2023.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Pipe* @ ¢ § +++ [G]
 
PEX 5106
 
PEXFLOW
 
CSA B137.5
3/8" - 2"

* Natural (Solid Wall) PEX Pipe Certified 3/8" - 2"sizes. Red, blue, white or orange PEX
  pipe (2
  layer pipe - natural with colored adhesive pipe) certified for 3/8" - 1" sizes. Tubing
  certified
  against CSA B137.5 shall include the standard designation(s) of the fitting system(s)
  for which the
  tubing is recommended by the manufacturer, and shall be marked, as applicable, with the
  following
  fitting system designation(s): ASTM F1960, ASTM F1807, ASTM F2159, and ASTM F2098.
@ PEX 5106: Meets the chlorine resistance requirements of ASTM F876 when tested in
  accordance with ASTM F2023.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
      documentation shipped with the product are Certified.

Radiant Floor Heating

Product Type   Material Type   Trade Name   Product Standard

Tubing* @ ¢ §
 
PEX 5106
 
PEXFLOW
 
CSA B137.5
3/8" - 2"

* Monowall pipe (natural); Skinned pipe (red, blue, white and orange); and Barrier pipe
  (red, blue, white and orange) are certified for the following sizes: 3/8", 1/2", 5/8",
  3/4", 1", 1 1/2", & 2".
  
  Tubing certified against CSA B137.5 shall include the standard designation(s) of the
  fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
  marked, as applicable with the following fitting system designation(s): ASTM F1960, ASTM
  F1807, ASTM F2159, and ASTM F2098
@ This tubing product has been evaluated against the performance requirements of ASTM
  F876/877 and CSA
  which the tubing is recommended by the 
  B137.5. This product is not NSF Certified for use in a potable water distribution
  system. This
  product has been evaluated for use in radiant floor heating, (NSF-rfh), applications only
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.

Tubing* @ ¢ §
 
PEX 5106
 
PEXFLOW
 
ASTM F876/F877
3/8" - 2"

* Monowall pipe (natural); Skinned pipe (red, blue, white and orange); and Barrier pipe
  (red, blue, white and orange) are certified for the following sizes: 3/8", 1/2", 5/8",
  3/4", 1", 1 1/2", & 2".
  
  Tubing certified against CSA B137.5 shall include the standard designation(s) of the
  fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
  marked, as applicable with the following fitting system designation(s): ASTM F1960, ASTM
  F1807, ASTM F2159, and ASTM F2098
@ This tubing product has been evaluated against the performance requirements of ASTM
  F876/877 and CSA
  which the tubing is recommended by the 
  B137.5. This product is not NSF Certified for use in a potable water distribution
  system. This
  product has been evaluated for use in radiant floor heating, (NSF-rfh), applications only
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.

NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
      documentation shipped with the product are Certified.


 
Everhot Inc. 
5407 Foster Avenue
Brooklyn, NY 11234 
United States 
347-492-7660

Facility : # 1 China

Surface Burning Characteristics of Building Materials

Product Type   Material Type   Trade Name   Product Standard

Tubing# $ *
 
PEX
 
Everhot
 
ASTM E84

3/8", 1/2" - 2"
Flame Spread Index <= 25   Smoke Developed Index <= 50  

# The Flame Spread Index and Smoke Developed Index for 1/2"-2" tubing are based on when
  tubing is field insulated with 1/2" JM  Microlok HP Hi performance fiberglass insulation
  as per RIFENG installation instructions. The 3/8" tubing is not insulated.
$ Certified for blue, natural, red, and white without oxygen barrier.
* Flame Spread Index and Smoke Developed Index based on minimum spacing of 18 inches
  between tubing runs.  Tubing shall be marked [NSF®-fs ASTM E84 FS<=25/SD<=50].

Tubing$ &
 
PEX
 
Everhot
 
CAN/ULC S102.2

3/8", 1/2" - 2"
Flame Spread Rating <= 25   Smoke Developed Classification <= 50  

$ Certified for blue, natural, red, and white without oxygen barrier.
& 3/8" tubing (without insulation) shall be marked [cNSF®-fs ULc S102.2 FS <=25/SD <=50].
  1/2" - 2" tubing (with insulation),  Flame Spread Index and Smoke Developed Index based
  on when the tubing is field insulated with JM Microlok HP Hi Performance Fiberglass
  insulation as per the pipe manufacturer's installation instructions.  Tubing shall be
  Marked [cNSF®-fs ULc S102.2 FS<=25/SD<=50].


Potable Water - Pipe and Fittings

Product Type   Material Type   Trade Name   Product Standard

Tubing$ * ^ ¢ § +++ [G]
 
PEX
 
Everhot
 
CSA B137.5
>= 1/8" SDR 9

$ Certified for blue, natural, red, and white without oxygen barrier.
* Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Tubing! * ^ § +++ [G]
 
PEX 5106
 
Everhot
 
ASTM F876/F877
1/8" - 6" SDR 9

! Certified for natural, red, white and blue without oxygen barrier.
  Natural - 5006
  Red, white, blue - 5006, 5106, 5206
* Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Tubing! * ^ § +++ [G]
 
PEX 5106
 
Everhot
 
CSA B137.5
1/8" - 6" SDR 9

! Certified for natural, red, white and blue without oxygen barrier.
  Natural - 5006
  Red, white, blue - 5006, 5106, 5206
* Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    


Radiant Floor Heating

Product Type   Material Type   Trade Name   Product Standard

Tubing$ * ¢ §
 
PEX
 
Everhot
 
CSA B137.5
>= 1/8" SDR 9

$ Certified for blue, natural, red, and white with oxygen barrier.
* Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.

Tubing$ * §
 
PEX 5006
 
Everhot
 
ASTM F876/F877
>= 1/8" SDR 9

$ Certified for blue, natural, red, and white with oxygen barrier.
* Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.



 
EZ Flo International 
1605 Research Circle
Rockwall, TX 75032 
United States 
800-486-5256
Visit this company's website

Facility : # 2 USA

Potable Water - Pipe and Fittings

Product Type   Material Type   Trade Name   Product Standard

Tubing# @ ^ § +++ [G]
 
PEX 5106
 
Eastman® PEX
 
ASTM F876/F877
1/8" - 1 1/4" SDR 9

# Authorized for gray and white.
@ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Tubing@ ^ § +++ [G]
 
PEX 5106
 
Eastman® PEX
 
ASTM F876/F877
1/8" CTS x 1/4" OD SDR 9

@ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Tubing# & @ ¢ +++ [G]
 
PEX 5106
 
Eastman® PEX
 
CSA B137.5
1/8" - 1 1/4" SDR 9

# Authorized for gray and white.
& Tubing certified against CSA B137.5 shall include the standard designation(s) of the
  fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
  marked, if applicable, with the following fitting system designations: ASTM F1807, ASTM
  F2159, ASTM F2098, ASTM F2080, ASSE 1061 and ASTM F1960.
@ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Tubing& @ ¢ +++ [G]
 
PEX 5106
 
Eastman® PEX
 
CSA B137.5
1/8" CTS x 1/4" OD SDR 9

& Tubing certified against CSA B137.5 shall include the standard designation(s) of the
  fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
  marked, if applicable, with the following fitting system designations: ASTM F1807, ASTM
  F2159, ASTM F2098, ASTM F2080, ASSE 1061 and ASTM F1960.
@ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Tubing# @ ^ § +++ [G]
 
PEX 5106
 
Merflex PEX
 
ASTM F876/F877
1/8" - 1 1/4" SDR 9

# Authorized for gray and white.
@ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Tubing@ ^ § +++ [G]
 
PEX 5106
 
Merflex PEX
 
ASTM F876/F877
1/8" CTS x 1/4" OD SDR 9

@ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Tubing# & @ ¢ +++ [G]
 
PEX 5106
 
Merflex PEX
 
CSA B137.5
1/8" - 1 1/4" SDR 9

# Authorized for gray and white.
& Tubing certified against CSA B137.5 shall include the standard designation(s) of the
  fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
  marked, if applicable, with the following fitting system designations: ASTM F1807, ASTM
  F2159, ASTM F2098, ASTM F2080, ASSE 1061 and ASTM F1960.
@ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Tubing& @ ¢ +++ [G]
 
PEX 5106
 
Merflex PEX
 
CSA B137.5
1/8" CTS x 1/4" OD SDR 9

& Tubing certified against CSA B137.5 shall include the standard designation(s) of the
  fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
  marked, if applicable, with the following fitting system designations: ASTM F1807, ASTM
  F2159, ASTM F2098, ASTM F2080, ASSE 1061 and ASTM F1960.
@ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    



 
Finproject S.p.A. 
Compounding BU – Roccabianca Plant
Via Paganina 3 
I-43010 Roccabianca (PR) 
Italy 
0039 0521 5291

Facility : Roccabianca, Italy

Potable Water - Materials

Material Type End Use Trade Name Product Standard
PEX 3006$ * +++ 1 Polidan T/A + Catalyst Masterbatch PS/2 N/A
PEX 3006$ * +++ 1 Polidan T/A + Catalyst Masterbatch PS/4 N/A
PEX 3006$ * +++ 1 Polidan T/A HF + Catalyst Masterbatch PS/2 N/A
PEX 3006$ * +++ 1 olidan T/A HF + Catalyst Masterbatch PS/4 N/A

$ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
* Tubing manufactured using this material is cure process dependent. Use of this material
  in NSF Certified tubing requires NSF's prior authorization.  Tubing produced from this
  material was tested to the performance requirements of ASTM F876.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).



 
GE Appliances, a Haier Company 
Appliance Park
Louisville, KY 40225 
United States 
502-452-3332
Visit this company's website

Facility : # 1 USA

Potable Water - Appurtenances

Product Type   Material Type   Trade Name   Product Standard

Refrigerator Supply Line# & ¢ § [G]
 
PEX
 
GE SmartConnect™
 
ASME A112.18.6/CSA B125.6
1/8" C.T.S.

# This product may be marked via a flag type label.
& Certified up to 8 feet in length.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    



 
Giacomini S.P.A. 
Via Per Alzo 39
28017 S. Maurizio D' Opaglio (NO) 
Italy 
39 0322 923372
Visit this company's website

Facility : D'Opaglio (NO), Italy

Radiant Floor Heating

Product Type   Material Type   Trade Name   Product Standard

Pipe
 
PEX 0006
 
L996 PE-X Pipe
 
ASTM F876/F877
3/8" - 1"

Pipe
 
PEX 0006
 
L996 PE-X Pipe
 
CSA B137.5
3/8" - 1"

Pipe
 
PEX 0006
 
R996 PE-X Pipe
 
ASTM F876/F877
3/8" - 1"

Pipe
 
PEX 0006
 
R996 PE-X Pipe
 
CSA B137.5
3/8" - 1"



 
Golan Plastic Products Ltd. 
Kibbutz Shaar Hagolan
M.P. Jordan Valley 15145 
Israel 
972 46 677432
Visit this company's website

Facility : Jordan Valley, Israel

Oil and Gas Producing Applications - Pipe and Fittings

Product Type   Material Type   Trade Name   Product Standard

Tubing
 
PEX 0006
 
Pexgol PE-Xa Black
 
ASTM F2905
3" - 18" SDR 7.3
3" - 20" SDR 8.3
3" - 24" SDR 9
3" - 36" SDR 11
3" - 36" SDR 13.5
3" - 48" SDR 15.5
3" - 54" SDR 17
3" - 54" SDR 21
16 mm - 355 mm SDR 6
16 mm - 450 mm SDR 7.4
16 mm - 800 mm SDR 9
16 mm - 630 mm SDR 11
16 mm - 630 mm SDR 13.6
16 mm - 630 mm SDR 16.2
16 mm - 630 mm SDR 17
16 mm - 630 mm SDR 21


Potable Water - Pipe and Fittings

Product Type   Material Type   Trade Name   Product Standard

Pipe^ § $$ +++
 
PEX 5106
 
AquaHeat PE-Xa Natural
 
ASTM F876/F877
3/8" - 1" DR 9

^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
$$ These products may also be produced with a clear, blue, orange or red barrier material
   on the outer layer of the tubing.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Pipe* ^ ¢ $$ +++
 
PEX 3106
 
AquaHeat PE-Xa Natural
 
ASTM F2788/F2788M
1/2" - 14" SDR 6 DR 6
16 mm - 355 mm DR 6
1/2" - 18" DR 7.4
16 mm - 450 mm DR 7.4
1/2" - 25" DR 9
16 mm - 630 mm DR 9
3/4" - 25" DR 11
20 mm - 630 mm DR 11
1" - 25" DR 13.6
25 mm - 630 mm DR 13.6
1 1/4" - 25" DR 16.2
32 mm - 630 mm DR 16.2
1 1/4" - 25" DR 17
32 mm - 630 mm DR 17

* Barrier Pipes only Certified up to 160mm (6").
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
$$ These products may also be produced with a clear, blue, orange or red barrier material
   on the outer layer of the tubing.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Pipe^ ¢ § $$ +++
 
PEX 3106
 
AquaHeat PE-Xa Natural
 
ASTM F876/F877
3/8" - 6" DR 9

^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
$$ These products may also be produced with a clear, blue, orange or red barrier material
   on the outer layer of the tubing.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Pipe# ^ ¢ § $$ +++
 
PEX 3106
 
AquaHeat PE-Xa Natural
 
CSA B137.5
3/8" - 6" DR 9

# Tubing certified against CSA B137.5 shall include the standard designation(s) of the
  fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
  qualified through testing.  Please verify that tubing certified against CSA B137.5 is
  only marked with the following fitting system designation(s):  ASTM F877, ASTM F2080,
  ASTM F1960.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
$$ These products may also be produced with a clear, blue, orange or red barrier material
   on the outer layer of the tubing.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Pipe# ^ ¢ § $$ +++
 
PEX 5106
 
AquaHeat PE-Xa Natural
 
CSA B137.5
3/8" - 1" DR 9

# Tubing certified against CSA B137.5 shall include the standard designation(s) of the
  fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
  qualified through testing.  Please verify that tubing certified against CSA B137.5 is
  only marked with the following fitting system designation(s):  ASTM F877, ASTM F2080,
  ASTM F1960.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
$$ These products may also be produced with a clear, blue, orange or red barrier material
   on the outer layer of the tubing.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Pipe$ * ^ +++
 
PEX 5006
 
AquaHeat PE-Xc Black
 
ASTM F2788/F2788M
1/2" - 1" DR 6
16 mm - 25 mm DR 6
1/2" - 1" DR 7.4
16 mm - 25 mm DR 7.4
1/2" - 1" DR 9

$ These products may also be produced with a blue, clear, or red barrier material on the
  outer layer of the tubing.
* Barrier Pipes only Certified up to 160mm (6").
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Pipe$ * ^ +++
 
PEX 5006
 
AquaHeat PE-Xc Blue
 
ASTM F2788/F2788M
1/2" - 1" DR 6
16 mm - 25 mm DR 6
1/2" - 1" DR 7.4
16 mm - 25 mm DR 7.4
1/2" - 1" DR 9
16 mm - 25 mm DR 9
3/4" - 1" DR 11
20 mm - 25 mm DR 11
1" DR 13.6
25 mm DR 13.6

$ These products may also be produced with a blue, clear, or red barrier material on the
  outer layer of the tubing.
* Barrier Pipes only Certified up to 160mm (6").
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Pipe$ * ^ +++
 
PEX 5006
 
AquaHeat PE-Xc Natural
 
ASTM F2788/F2788M
1/2" - 1" DR 6
16 mm - 25 mm DR 6
1/2" - 1" DR 7.4
16 mm - 25 mm DR 7.4
1/2" - 1" DR 9
16 mm - 25 mm DR 9
3/4" - 1" DR 11
20 mm - 25 mm DR 11
1" DR 13.6
25 mm DR 13.6

$ These products may also be produced with a blue, clear, or red barrier material on the
  outer layer of the tubing.
* Barrier Pipes only Certified up to 160mm (6").
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Pipe$ * ^ +++
 
PEX 5006
 
AquaHeat PE-Xc Red
 
ASTM F2788/F2788M
1/2" - 1" DR 6
16 mm - 25 mm DR 6
1/2" - 1" DR 7.4
16 mm - 25 mm DR 7.4
1/2" - 1" DR 9
16 mm - 25 mm DR 9
3/4" - 1" DR 11
20 mm - 25 mm DR 11
1" DR 13.6
25 mm DR 13.6

$ These products may also be produced with a blue, clear, or red barrier material on the
  outer layer of the tubing.
* Barrier Pipes only Certified up to 160mm (6").
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Pipe* ^ ¢ $$ +++
 
PEX 3106
 
AquaSeal PE-Xa Natural
 
ASTM F2788/F2788M
1/2" - 14" DR 6
16 mm - 355 mm DR 6
1/2" - 18" DR 7.4
16 mm - 450 mm DR 7.4
1/2" - 25" SDR 9
16 mm - 630 mm SDR 9
3/4" - 25" SDR 11
20 mm - 630 mm SDR 11
1" - 25" DR 13.6
25 mm - 630 mm DR 13.6
1 1/4" - 25" DR 16.2
32 mm - 630 mm DR 16.2
1 1/4" - 25" SDR 17
32 mm - 630 mm SDR 17

* Barrier Pipes only Certified up to 160mm (6").
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
$$ These products may also be produced with a clear, blue, orange or red barrier material
   on the outer layer of the tubing.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Pipe^ ¢ § $$ +++
 
PEX 3106
 
AquaSeal PE-Xa Natural
 
ASTM F876/F877
3/8" - 6" SDR 9

^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
$$ These products may also be produced with a clear, blue, orange or red barrier material
   on the outer layer of the tubing.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Pipe^ § $$ +++
 
PEX 5106
 
AquaSeal PE-Xa Natural
 
ASTM F876/F877
3/8" - 1" DR 9

^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
$$ These products may also be produced with a clear, blue, orange or red barrier material
   on the outer layer of the tubing.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Pipe# ^ ¢ § $$ +++
 
PEX 3106
 
AquaSeal PE-Xa Natural
 
CSA B137.5
3/8" - 6" SDR 9

# Tubing certified against CSA B137.5 shall include the standard designation(s) of the
  fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
  qualified through testing.  Please verify that tubing certified against CSA B137.5 is
  only marked with the following fitting system designation(s):  ASTM F877, ASTM F2080,
  ASTM F1960.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
$$ These products may also be produced with a clear, blue, orange or red barrier material
   on the outer layer of the tubing.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Pipe# ^ ¢ § $$ +++
 
PEX 5106
 
AquaSeal PE-Xa Natural
 
CSA B137.5
3/8" - 1" DR 9

# Tubing certified against CSA B137.5 shall include the standard designation(s) of the
  fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
  qualified through testing.  Please verify that tubing certified against CSA B137.5 is
  only marked with the following fitting system designation(s):  ASTM F877, ASTM F2080,
  ASTM F1960.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
$$ These products may also be produced with a clear, blue, orange or red barrier material
   on the outer layer of the tubing.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Pipe$ * ^ +++
 
PEX 5006
 
AquaSeal PE-Xc Black
 
ASTM F2788/F2788M
1/2" - 1" DR 6
16 mm - 25 mm DR 6
1/2" - 1" DR 7.4
16 mm - 25 mm DR 7.4
1/2" - 1" SDR 9
16 mm - 25 mm SDR 9
3/4" - 1" SDR 11
20 mm - 25 mm SDR 11
1" DR 13.6
25 mm DR 13.6

$ These products may also be produced with a blue, clear, or red barrier material on the
  outer layer of the tubing.
* Barrier Pipes only Certified up to 160mm (6").
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Pipe$ * ^ +++
 
PEX 5006
 
AquaSeal PE-Xc Blue
 
ASTM F2788
1/2" - 1" DR 6
16 mm - 25 mm DR 6
1/2" - 1" DR 7.4
16 mm - 25 mm DR 7.4
1/2" - 1" SDR 9
16 mm - 25 mm SDR 9
3/4" - 1" SDR 11
20 mm - 25 mm SDR 11
1" DR 13.6
25 mm DR 13.6

$ These products may also be produced with a blue, clear, or red barrier material on the
  outer layer of the tubing.
* Barrier Pipes only Certified up to 160mm (6").
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Pipe$ * ^ +++
 
PEX 5006
 
AquaSeal PE-Xc Natural
 
ASTM F2788/F2788M
1/2" - 1" DR 6
16 mm - 25 mm DR 6
1/2" - 1" DR 7.4
16 mm - 25 mm DR 7.4
1/2" - 1" SDR 9
16 mm - 25 mm SDR 9
3/4" - 1" SDR 11
20 mm - 25 mm SDR 11
1" DR 13.6
25 mm DR 13.6

$ These products may also be produced with a blue, clear, or red barrier material on the
  outer layer of the tubing.
* Barrier Pipes only Certified up to 160mm (6").
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Pipe$ * ^ +++
 
PEX 5006
 
AquaSeal PE-Xc Red
 
ASTM F2788/F2788M
1/2" - 1" DR 6
16 mm - 25 mm DR 6
1/2" - 1" DR 7.4
16 mm - 25 mm DR 7.4
1/2" - 1" SDR 9
16 mm - 25 mm SDR 9
3/4" - 1" SDR 11
20 mm - 25 mm SDR 11
1" DR 13.6
25 mm DR 13.6

$ These products may also be produced with a blue, clear, or red barrier material on the
  outer layer of the tubing.
* Barrier Pipes only Certified up to 160mm (6").
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Pipe* ^ ¢ $$ +++
 
PEX 3106
 
HeatFlow PEX PE-Xa Natural
 
ASTM F2788/F2788M
1/2" - 14" DR 6
16 mm - 355 mm DR 6
1/2" - 18" DR 7.4
16 mm - 450 mm DR 7.4
1/2" - 25" SDR 9
16 mm - 630 mm SDR 9
3/4" - 25" SDR 11
20 mm - 630 mm SDR 11
1" - 25" DR 13.6
25 mm - 630 mm DR 13.6
1 1/4" - 25" DR 16.2
32 mm - 630 mm DR 16.2
1 1/4" - 25" SDR 17
32 mm - 630 mm SDR 17

* Barrier Pipes only Certified up to 160mm (6").
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
$$ These products may also be produced with a clear, blue, orange or red barrier material
   on the outer layer of the tubing.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Pipe^ ¢ $$ +++
 
PEX 3106
 
HeatFlow PEX PE-Xa Natural
 
ASTM F876/F877
3/8" - 6" SDR 9

^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
$$ These products may also be produced with a clear, blue, orange or red barrier material
   on the outer layer of the tubing.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Pipe^ § $$ +++
 
PEX 5106
 
HeatFlow PEX PE-Xa Natural
 
ASTM F876/F877
3/8" - 1" DR 9

^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
$$ These products may also be produced with a clear, blue, orange or red barrier material
   on the outer layer of the tubing.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Pipe# ^ ¢ § $$ +++
 
PEX 5106
 
HeatFlow PEX PE-Xa Natural
 
CSA B137.5
3/8" - 1" DR 9

# Tubing certified against CSA B137.5 shall include the standard designation(s) of the
  fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
  qualified through testing.  Please verify that tubing certified against CSA B137.5 is
  only marked with the following fitting system designation(s):  ASTM F877, ASTM F2080,
  ASTM F1960.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
$$ These products may also be produced with a clear, blue, orange or red barrier material
   on the outer layer of the tubing.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Pipe# ^ ¢ § $$ +++
 
PEX 3106
 
HeatFlow PEX PE-Xa Natural
 
CSA B137.5
3/8" - 6" SDR 9

# Tubing certified against CSA B137.5 shall include the standard designation(s) of the
  fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
  qualified through testing.  Please verify that tubing certified against CSA B137.5 is
  only marked with the following fitting system designation(s):  ASTM F877, ASTM F2080,
  ASTM F1960.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
$$ These products may also be produced with a clear, blue, orange or red barrier material
   on the outer layer of the tubing.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Pipe$ * ^ +++
 
PEX 5006
 
HeatFlow PEX PE-Xc Black
 
ASTM F2788/F2788M
1/2" - 1" DR 6
16 mm - 25 mm DR 6
1/2" - 1" DR 7.4
16 mm - 25 mm DR 7.4
1/2" - 1" SDR 9
16 mm - 25 mm SDR 9
3/4" - 1" SDR 11
20 mm - 25 mm SDR 11
1" DR 13.6
25 mm DR 13.6

$ These products may also be produced with a blue, clear, or red barrier material on the
  outer layer of the tubing.
* Barrier Pipes only Certified up to 160mm (6").
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Pipe$ * ^ +++
 
PEX 5006
 
HeatFlow PEX PE-Xc Blue
 
ASTM F2788/F2788M
1/2" - 1" DR 6
16 mm - 25 mm DR 6
1/2" - 1" DR 7.4
16 mm - 25 mm DR 7.4
1/2" - 1" SDR 9
16 mm - 25 mm SDR 9
3/4" - 1" SDR 11
20 mm - 25 mm SDR 11
1" DR 13.6
25 mm DR 13.6

$ These products may also be produced with a blue, clear, or red barrier material on the
  outer layer of the tubing.
* Barrier Pipes only Certified up to 160mm (6").
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Pipe$ * ^ +++
 
PEX 5006
 
HeatFlow PEX PE-Xc Red
 
ASTM F2788/F2788M
1/2" - 1" DR 6
16 mm - 25 mm DR 6
1/2" - 1" DR 7.4
16 mm - 25 mm DR 7.4
1/2" - 1" SDR 9
16 mm - 25 mm SDR 9
3/4" - 1" SDR 11
20 mm - 25 mm SDR 11
1" DR 13.6
25 mm DR 13.6

$ These products may also be produced with a blue, clear, or red barrier material on the
  outer layer of the tubing.
* Barrier Pipes only Certified up to 160mm (6").
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Pipe$ * ^ +++
 
PEX 5006
 
HeatFlow PEX PE-Xc Natural
 
ASTM F2788/F2788M
1/2" - 1" DR 6
16 mm - 25 mm DR 6
1/2" - 1" DR 7.4
16 mm - 25 mm DR 7.4
1/2" - 1" SDR 9
16 mm - 25 mm SDR 9
3/4" - 1" SDR 11
20 mm - 25 mm SDR 11
1" DR 13.6
25 mm DR 13.6

$ These products may also be produced with a blue, clear, or red barrier material on the
  outer layer of the tubing.
* Barrier Pipes only Certified up to 160mm (6").
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Tubing^ ¢ § $$ +++
 
PEX 3106
 
Pexgol PE-Xa Black
 
ASTM F876/F877
1/2" - 3" SDR 9

^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
$$ These products may also be produced with a clear, blue, orange or red barrier material
   on the outer layer of the tubing.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Tubing* ^ ¢ § $$ +++
 
PEX 3106
 
Pexgol PE-Xa Black
 
ASTM F2788/F2788M
3" SDR 9
16 mm - 76 mm SDR 9
3" - 14" SDR 6 DR 6
16 mm - 355 mm DR 6
3" - 18" DR 7.4
16 mm - 450 mm DR 7.4
3" - 25" DR 9
16 mm - 630 mm DR 9
3" - 25" DR 11
20 mm - 630 mm DR 11
3" - 25" DR 13.6
25 mm - 630 mm DR 13.6
3" - 25" DR 16.2
32 mm - 630 mm DR 16.2
3" - 25" DR 17
32 mm - 630 mm DR 17

* Barrier Pipes only Certified up to 160mm (6").
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
$$ These products may also be produced with a clear, blue, orange or red barrier material
   on the outer layer of the tubing.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Pipe# ^ ¢ § $$ +++
 
PEX 5006
 
Pexgol PE-Xa Black
 
CSA B137.5
3/8" - 1" DR 9

# Tubing certified against CSA B137.5 shall include the standard designation(s) of the
  fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
  qualified through testing.  Please verify that tubing certified against CSA B137.5 is
  only marked with the following fitting system designation(s):  ASTM F877, ASTM F2080,
  ASTM F1960.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
$$ These products may also be produced with a clear, blue, orange or red barrier material
   on the outer layer of the tubing.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Pipe* ^ ¢ $$ +++
 
PEX 3106
 
Pexgol PE-Xa Natural
 
ASTM F2788/F2788M
1/2" - 14" DR 6
16 mm - 355 mm DR 6
1/2" - 18" DR 7.4
16 mm - 450 mm DR 7.4
1/2" - 25" SDR 9
16 mm - 630 mm SDR 9
3/4" - 25" SDR 11
20 mm - 630 mm SDR 11
1" - 25" DR 13.6
25 mm - 630 mm DR 13.6
1 1/4" - 25" DR 16.2
32 mm - 630 mm DR 16.2
1 1/4" - 25" SDR 17
32 mm - 630 mm SDR 17

* Barrier Pipes only Certified up to 160mm (6").
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
$$ These products may also be produced with a clear, blue, orange or red barrier material
   on the outer layer of the tubing.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Pipe^ ¢ § $$ +++
 
PEX 3106
 
Pexgol PE-Xa Natural
 
ASTM F876/F877
3/8" - 6" SDR 9

^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
$$ These products may also be produced with a clear, blue, orange or red barrier material
   on the outer layer of the tubing.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Pipe^ § $$ +++
 
PEX 5106
 
Pexgol PE-Xa Natural
 
ASTM F876/F877
3/8" - 1" DR 9

^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
$$ These products may also be produced with a clear, blue, orange or red barrier material
   on the outer layer of the tubing.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Pipe# ^ ¢ § $$ +++
 
PEX 3106
 
Pexgol PE-Xa Natural
 
CSA B137.5
3/8" - 6" SDR 9

# Tubing certified against CSA B137.5 shall include the standard designation(s) of the
  fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
  qualified through testing.  Please verify that tubing certified against CSA B137.5 is
  only marked with the following fitting system designation(s):  ASTM F877, ASTM F2080,
  ASTM F1960.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
$$ These products may also be produced with a clear, blue, orange or red barrier material
   on the outer layer of the tubing.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Pipe# ^ ¢ § $$ +++
 
PEX 5106
 
Pexgol PE-Xa Natural
 
CSA B137.5
3/8" - 1" DR 9

# Tubing certified against CSA B137.5 shall include the standard designation(s) of the
  fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
  qualified through testing.  Please verify that tubing certified against CSA B137.5 is
  only marked with the following fitting system designation(s):  ASTM F877, ASTM F2080,
  ASTM F1960.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
$$ These products may also be produced with a clear, blue, orange or red barrier material
   on the outer layer of the tubing.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Pipe* ^ ¢ $$ +++
 
PEX 3106
 
Sioux Chief PE-Xa Natural
 
ASTM F2788/F2788M
1/2" - 14" DR 6
16 mm - 355 mm DR 6
1/2" - 18" DR 7.4
16 mm - 450 mm DR 7.4
1/2" - 25" SDR 9
16 mm - 630 mm SDR 9
3/4" - 25" SDR 11
20 mm - 630 mm SDR 11
1" - 25" DR 13.6
25 mm - 630 mm DR 13.6
1 1/4" - 25" DR 16.2
32 mm - 630 mm DR 16.2
1 1/4" - 25" SDR 17
32 mm - 630 mm SDR 17

* Barrier Pipes only Certified up to 160mm (6").
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
$$ These products may also be produced with a clear, blue, orange or red barrier material
   on the outer layer of the tubing.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Pipe$ * ^ +++
 
PEX 5006
 
Pexgol PE-Xc Black
 
ASTM F2788/F2788M
1/2" - 1" DR 6
16 mm - 25 mm DR 6
1/2" - 1" DR 7.4
16 mm - 25 mm DR 7.4
1/2" - 1" SDR 9
16 mm - 25 mm SDR 9
3/4" - 1" SDR 11
20 mm - 25 mm SDR 11
1" DR 13.6
25 mm DR 13.6

$ These products may also be produced with a blue, clear, or red barrier material on the
  outer layer of the tubing.
* Barrier Pipes only Certified up to 160mm (6").
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Pipe$ * ^ +++
 
PEX 5006
 
Pexgol PE-Xc Blue
 
ASTM F2788/F2788M
1/2" - 1" DR 6
16 mm - 25 mm DR 6
1/2" - 1" DR 7.4
16 mm - 25 mm DR 7.4
1/2" - 1" SDR 9
16 mm - 25 mm SDR 9
3/4" - 1" SDR 11
20 mm - 25 mm SDR 11
1" DR 13.6
25 mm DR 13.6

$ These products may also be produced with a blue, clear, or red barrier material on the
  outer layer of the tubing.
* Barrier Pipes only Certified up to 160mm (6").
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Pipe$ * ^ +++
 
PEX 5006
 
Pexgol PE-Xc Red
 
ASTM F2788/F2788M
1/2" - 1" DR 6
16 mm - 25 mm DR 6
1/2" - 1" DR 7.4
16 mm - 25 mm DR 7.4
1/2" - 1" SDR 9
16 mm - 25 mm SDR 9
3/4" - 1" SDR 11
20 mm - 25 mm SDR 11
1" DR 13.6
25 mm DR 13.6

$ These products may also be produced with a blue, clear, or red barrier material on the
  outer layer of the tubing.
* Barrier Pipes only Certified up to 160mm (6").
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Pipe$ * ^ +++
 
PEX 5006
 
Pexgol PE-Xc Natural
 
ASTM F2788/F2788M
1/2" - 1" DR 6
16 mm - 25 mm DR 6
1/2" - 1" DR 7.4
16 mm - 25 mm DR 7.4
1/2" - 1" SDR 9
16 mm - 25 mm SDR 9
3/4" - 1" SDR 11
20 mm - 25 mm SDR 11
1" DR 13.6
25 mm DR 13.6

$ These products may also be produced with a blue, clear, or red barrier material on the
  outer layer of the tubing.
* Barrier Pipes only Certified up to 160mm (6").
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Pipe* ^ ¢ $$ +++
 
PEX 3106
 
Plumber Friendly PE-Xa Natural
 
ASTM F2788/F2788M
1/2" - 14" DR 6
16 mm - 355 mm DR 6
1/2" - 18" DR 7.4
16 mm - 450 mm DR 7.4
1/2" - 25" SDR 9
16 mm - 630 mm SDR 9
3/4" - 25" SDR 11
20 mm - 630 mm SDR 11
1" - 25" DR 13.6
25 mm - 630 mm DR 13.6
1 1/4" - 25" DR 16.2
32 mm - 630 mm DR 16.2
1 1/4" - 25" SDR 17
32 mm - 630 mm SDR 17

* Barrier Pipes only Certified up to 160mm (6").
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
$$ These products may also be produced with a clear, blue, orange or red barrier material
   on the outer layer of the tubing.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Pipe^ ¢ § $$ +++
 
PEX 3106
 
Plumber Friendly PE-Xa Natural
 
ASTM F876/F877
3/8" - 6" SDR 9

^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
$$ These products may also be produced with a clear, blue, orange or red barrier material
   on the outer layer of the tubing.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Pipe^ § $$ +++
 
PEX 5106
 
Plumber Friendly PE-Xa Natural
 
ASTM F876/F877
3/8" - 1" DR 9

^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
$$ These products may also be produced with a clear, blue, orange or red barrier material
   on the outer layer of the tubing.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Pipe# ^ ¢ § $$ +++
 
PEX 3106
 
Plumber Friendly PE-Xa Natural
 
CSA B137.5
3/8" - 6" SDR 9

# Tubing certified against CSA B137.5 shall include the standard designation(s) of the
  fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
  qualified through testing.  Please verify that tubing certified against CSA B137.5 is
  only marked with the following fitting system designation(s):  ASTM F877, ASTM F2080,
  ASTM F1960.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
$$ These products may also be produced with a clear, blue, orange or red barrier material
   on the outer layer of the tubing.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Pipe^ ¢ § $$ +++
 
PEX 3106
 
Sioux Chief PE-Xa Natural
 
ASTM F876/F877
3/8" - 6" SDR 9

^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
$$ These products may also be produced with a clear, blue, orange or red barrier material
   on the outer layer of the tubing.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Pipe# ^ ¢ § $$ +++
 
PEX 5106
 
Plumber Friendly PE-Xa Natural
 
CSA B137.5
3/8" - 1" DR 9

# Tubing certified against CSA B137.5 shall include the standard designation(s) of the
  fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
  qualified through testing.  Please verify that tubing certified against CSA B137.5 is
  only marked with the following fitting system designation(s):  ASTM F877, ASTM F2080,
  ASTM F1960.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
$$ These products may also be produced with a clear, blue, orange or red barrier material
   on the outer layer of the tubing.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Pipe$ * ^ +++
 
PEX 5006
 
Plumber Friendly PE-Xc Black
 
ASTM F2788/F2788M
1/2" - 1" DR 6
16 mm - 25 mm DR 6
1/2" - 1" DR 7.4
16 mm - 25 mm DR 7.4
1/2" - 1" SDR 9
16 mm - 25 mm SDR 9
3/4" - 1" SDR 11
20 mm - 25 mm SDR 11
1" DR 13.6
25 mm DR 13.6

$ These products may also be produced with a blue, clear, or red barrier material on the
  outer layer of the tubing.
* Barrier Pipes only Certified up to 160mm (6").
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Pipe$ * ^ +++
 
PEX 5006
 
Plumber Friendly PE-Xc Blue
 
ASTM F2788/F2788M
1/2" - 1" DR 6
16 mm - 25 mm DR 6
1/2" - 1" DR 7.4
16 mm - 25 mm SDR 7.4
1/2" - 1" SDR 9
16 mm - 25 mm SDR 9
3/4" - 1" SDR 11
20 mm - 25 mm SDR 11
1" DR 13.6
25 mm DR 13.6

$ These products may also be produced with a blue, clear, or red barrier material on the
  outer layer of the tubing.
* Barrier Pipes only Certified up to 160mm (6").
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Pipe$ * ^ +++
 
PEX 5006
 
Plumber Friendly PE-Xc Natural
 
ASTM F2788/F2788M
1/2" - 1" DR 6
16 mm - 25 mm DR 6
1/2" - 1" DR 7.4
16 mm - 25 mm DR 7.4
1/2" - 1" DR 9
16 mm - 25 mm SDR 9
3/4" - 1" SDR 11
20 mm - 25 mm SDR 11
1" DR 13.6
25 mm DR 13.6

$ These products may also be produced with a blue, clear, or red barrier material on the
  outer layer of the tubing.
* Barrier Pipes only Certified up to 160mm (6").
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Pipe$ * ^ +++
 
PEX 5006
 
Plumber Friendly PE-Xc Red
 
ASTM F2788/F2788M
1/2" - 1" DR 6
16 mm - 25 mm DR 6
1/2" - 1" DR 7.4
16 mm - 25 mm DR 7.4
1/2" - 1" SDR 9
16 mm - 25 mm SDR 9
3/4" - 1" SDR 11
20 mm - 25 mm SDR 11
1" DR 13.6
25 mm SDR 13.6

$ These products may also be produced with a blue, clear, or red barrier material on the
  outer layer of the tubing.
* Barrier Pipes only Certified up to 160mm (6").
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Pipe^ ¢ § $$ +++
 
PEX 3106
 
Slant/Fin Heating PE-Xa Natural
 
ASTM F876/F877
3/8" - 6" SDR 9

^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
$$ These products may also be produced with a clear, blue, orange or red barrier material
   on the outer layer of the tubing.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Pipe# ^ ¢ § $$ +++
 
PEX 3106
 
Sioux Chief PE-Xa Natural
 
CSA B137.5
3/8" - 6" SDR 9

# Tubing certified against CSA B137.5 shall include the standard designation(s) of the
  fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
  qualified through testing.  Please verify that tubing certified against CSA B137.5 is
  only marked with the following fitting system designation(s):  ASTM F877, ASTM F2080,
  ASTM F1960.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
$$ These products may also be produced with a clear, blue, orange or red barrier material
   on the outer layer of the tubing.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Pipe^ § $$ +++
 
PEX 5106
 
Sioux Chief PE-Xa Natural
 
ASTM F876/F877
3/8" - 1" DR 9

^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
$$ These products may also be produced with a clear, blue, orange or red barrier material
   on the outer layer of the tubing.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Pipe# ^ ¢ § $$ +++
 
PEX 5106
 
Sioux Chief PE-Xa Natural
 
CSA B137.5
3/8" - 1" DR 9

# Tubing certified against CSA B137.5 shall include the standard designation(s) of the
  fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
  qualified through testing.  Please verify that tubing certified against CSA B137.5 is
  only marked with the following fitting system designation(s):  ASTM F877, ASTM F2080,
  ASTM F1960.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
$$ These products may also be produced with a clear, blue, orange or red barrier material
   on the outer layer of the tubing.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Pipe^ § $$ +++
 
PEX 5106
 
Slant/FIN Heating PE-Xa Natural
 
ASTM F876/F877
3/8" - 1" DR 9

^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
$$ These products may also be produced with a clear, blue, orange or red barrier material
   on the outer layer of the tubing.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Pipe# ^ ¢ § $$ +++
 
PEX 3106
 
Slant/Fin Heating PE-Xa Natural
 
CSA B137.5
3/8" - 6" SDR 9

# Tubing certified against CSA B137.5 shall include the standard designation(s) of the
  fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
  qualified through testing.  Please verify that tubing certified against CSA B137.5 is
  only marked with the following fitting system designation(s):  ASTM F877, ASTM F2080,
  ASTM F1960.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
$$ These products may also be produced with a clear, blue, orange or red barrier material
   on the outer layer of the tubing.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Pipe$ * ^ +++
 
PEX 5006
 
Slant/Fin Heating PE-Xc Black
 
ASTM F2788/F2788M
1/2" - 1" DR 6
16 mm - 25 mm DR 6
1/2" - 1" DR 7.4
16 mm - 25 mm DR 7.4
1/2" - 1" SDR 9
16 mm - 25 mm SDR 9
3/4" - 1" SDR 11
20 mm - 25 mm SDR 11
1" DR 13.6
25 mm DR 13.6

$ These products may also be produced with a blue, clear, or red barrier material on the
  outer layer of the tubing.
* Barrier Pipes only Certified up to 160mm (6").
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Pipe$ * ^ +++
 
PEX 5006
 
Slant/Fin Heating PE-Xc Blue
 
ASTM F2788/F2788M
1/2" - 1" DR 6
16 mm - 25 mm DR 6
1/2" - 1" DR 7.4
16 mm - 25 mm DR 7.4
1/2" - 1" SDR 9
16 mm - 25 mm SDR 9
3/4" - 1" Sch 11
20 mm - 25 mm SDR 11
1" DR 13.6
25 mm DR 13.6

$ These products may also be produced with a blue, clear, or red barrier material on the
  outer layer of the tubing.
* Barrier Pipes only Certified up to 160mm (6").
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Pipe* ^ ¢ $$ +++
 
PEX 3106
 
Slant/Fin Heating PE-Xa Natural
 
ASTM F2788/F2788M
1/2" - 14" DR 6
16 mm - 355 mm DR 6
1/2" - 18" DR 7.4
16 mm - 450 mm DR 7.4
1/2" - 25" SDR 9
16 mm - 630 mm SDR 9
3/4" - 25" SDR 11
20 mm - 630 mm SDR 11
1" - 25" DR 13.6
25 mm - 630 mm DR 16.2
1 1/4" - 25" DR 16.2
32 mm - 630 mm DR 16.2
1 1/4" - 25" SDR 17
32 mm - 630 mm SDR 17

* Barrier Pipes only Certified up to 160mm (6").
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
$$ These products may also be produced with a clear, blue, orange or red barrier material
   on the outer layer of the tubing.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Pipe$ * ^ +++
 
PEX 5006
 
Slant/Fin Heating PE-Xc Natural
 
ASTM F2788/F2788M
20 mm - 25 mm SDR 11
3/4" - 1" SDR 11
16 mm - 25 mm SDR 9
16 mm - 25 mm DR 7.4
1/2" - 1" SDR 9
25 mm DR 13.6
1" DR 13.6
1/2" - 1" DR 7.4
16 mm - 25 mm DR 6
1/2" - 1" DR 6

$ These products may also be produced with a blue, clear, or red barrier material on the
  outer layer of the tubing.
* Barrier Pipes only Certified up to 160mm (6").
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Pipe$ * ^ +++
 
PEX 5006
 
Slant/Fin Heating PE-Xc Red
 
ASTM F2788/F2788M
1/2" - 1" DR 6
16 mm - 25 mm DR 6
1/2" - 1" DR 7.4
16 mm - 25 mm DR 7.4
1/2" - 1" SDR 9
16 mm - 25 mm SDR 9
3/4" - 1" SDR 11
20 mm - 25 mm SDR 11
1" DR 13.6
25 mm DR 13.6

$ These products may also be produced with a blue, clear, or red barrier material on the
  outer layer of the tubing.
* Barrier Pipes only Certified up to 160mm (6").
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Pipe^ ¢ § $$ +++
 
PEX 3106
 
Slant/Fin Plumbing PE-Xa Natural
 
ASTM F876/F877
3/8" - 6" SDR 9

^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
$$ These products may also be produced with a clear, blue, orange or red barrier material
   on the outer layer of the tubing.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Pipe* ^ ¢ $$ +++
 
PEX 3106
 
Slant/Fin Plumbing PE-Xa Natural
 
ASTM F2788/F2788M
1/2" - 14" DR 6
16 mm - 355 mm DR 6
1/2" - 18" DR 7.4
16 mm - 450 mm DR 7.4
1/2" - 25" SDR 9
16 mm - 630 mm SDR 9
3/4" - 25" SDR 11
20 mm - 630 mm SDR 11
1" - 25" DR 13.6
25 mm - 630 mm DR 13.6
1 1/4" - 25" DR 16.2
32 mm - 630 mm DR 16.2
1 1/4" - 25" SDR 17
32 mm - 630 mm SDR 17

* Barrier Pipes only Certified up to 160mm (6").
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
$$ These products may also be produced with a clear, blue, orange or red barrier material
   on the outer layer of the tubing.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Pipe^ § $$ +++
 
PEX 5106
 
Slant/FIN Plumbing PE-Xa Natural
 
ASTM F876/F877
3/8" - 1" DR 9

^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
$$ These products may also be produced with a clear, blue, orange or red barrier material
   on the outer layer of the tubing.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Pipe# ^ ¢ § $$ +++
 
PEX 5106
 
Slant/FIN Plumbing PE-Xa Natural
 
CSA B137.5
3/8" - 1" DR 9

# Tubing certified against CSA B137.5 shall include the standard designation(s) of the
  fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
  qualified through testing.  Please verify that tubing certified against CSA B137.5 is
  only marked with the following fitting system designation(s):  ASTM F877, ASTM F2080,
  ASTM F1960.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
$$ These products may also be produced with a clear, blue, orange or red barrier material
   on the outer layer of the tubing.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Pipe# ^ ¢ § $$ +++
 
PEX 3106
 
Slant/Fin Plumbing PE-Xa Natural
 
CSA B137.5
3/8" - 6" SDR 9

# Tubing certified against CSA B137.5 shall include the standard designation(s) of the
  fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
  qualified through testing.  Please verify that tubing certified against CSA B137.5 is
  only marked with the following fitting system designation(s):  ASTM F877, ASTM F2080,
  ASTM F1960.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
$$ These products may also be produced with a clear, blue, orange or red barrier material
   on the outer layer of the tubing.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Pipe$ * ^ +++
 
PEX 5006
 
Slant/Fin Plumbing PE-Xc Black
 
ASTM F2788/F2788M
1/2" - 1" DR 6
16 mm - 25 mm SIDR 6
1/2" - 1" DR 7.4
16 mm - 25 mm DR 7.4
1/2" - 1" SDR 9
16 mm - 25 mm SDR 9
3/4" - 1" SDR 11
20 mm - 25 mm SDR 11
1" DR 13.6
25 mm DR 13.6

$ These products may also be produced with a blue, clear, or red barrier material on the
  outer layer of the tubing.
* Barrier Pipes only Certified up to 160mm (6").
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Pipe$ * ^ +++
 
PEX 5006
 
Slant/Fin Plumbing PE-Xc Blue
 
ASTM F2788/F2788M
1/2" - 1" DR 6
16 mm - 25 mm DR 6
1/2" - 1" DR 7.4
16 mm - 25 mm DR 7.4
1/2" - 1" SDR 9
16 mm - 25 mm SDR 9
3/4" - 1" SDR 11
20 mm - 25 mm SDR 11
1" DR 13.6
25 mm DR 13.6

$ These products may also be produced with a blue, clear, or red barrier material on the
  outer layer of the tubing.
* Barrier Pipes only Certified up to 160mm (6").
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Pipe$ * ^ +++
 
PEX 5006
 
Slant/Fin Plumbing PE-Xc Natural
 
ASTM F2788/F2788M
1/2" - 1" DR 6
16 mm - 25 mm DR 6
1/2" - 1" DR 7.4
16 mm - 25 mm DR 7.4
1/2" - 1" SDR 9
16 mm - 25 mm SDR 9
3/4" - 1" SDR 11
20 mm - 25 mm SDR 11
1" DR 13.6
25 mm DR 13.6

$ These products may also be produced with a blue, clear, or red barrier material on the
  outer layer of the tubing.
* Barrier Pipes only Certified up to 160mm (6").
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Pipe$ * ^ +++
 
PEX 5006
 
Slant/Fin Plumbing PE-Xc Red
 
ASTM F2788/F2788M
1/2" - 1" DR 6
16 mm - 25 mm DR 6
1/2" - 1" DR 7.4
16 mm - 25 mm DR 7.4
1/2" - 1" SDR 9
16 mm - 25 mm SDR 9
3/4" - 1" SDR 11
20 mm - 25 mm SDR 11
1" DR 13.6
25 mm DR 13.6

$ These products may also be produced with a blue, clear, or red barrier material on the
  outer layer of the tubing.
* Barrier Pipes only Certified up to 160mm (6").
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Pipe$ * ^ +++
 
PEX 5006
 
Sioux Chief PE-Xc Black
 
ASTM F2788/F2788M
1/2" - 1" DR 6
16 mm - 25 mm DR 6
1/2" - 1" DR 7.4
16 mm - 25 mm DR 7.4
1/2" - 1" SDR 9
16 mm - 25 mm SDR 9
3/4" - 1" SDR 11
20 mm - 25 mm SDR 11
1" DR 13.6
25 mm DR 13.6

$ These products may also be produced with a blue, clear, or red barrier material on the
  outer layer of the tubing.
* Barrier Pipes only Certified up to 160mm (6").
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Pipe^ ¢ § $$ +++
 
PEX 3106
 
Terratherma PE-Xa Natural
 
ASTM F876/F877
3/8" - 6" SDR 9

^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
$$ These products may also be produced with a clear, blue, orange or red barrier material
   on the outer layer of the tubing.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Pipe* ^ ¢ $$ +++
 
PEX 3106
 
Terratherma PE-Xa Natural
 
ASTM F2788/F2788M
1/2" - 14" DR 6
16 mm - 355 mm DR 6
1/2" - 18" DR 7.4
16 mm - 450 mm DR 7.4
1/2" - 25" SDR 9
16 mm - 630 mm SDR 9
3/4" - 25" SDR 11
20 mm - 630 mm SDR 11
1" - 25" DR 13.6
25 mm - 630 mm DR 13.6
1 1/4" - 25" DR 16.2
32 mm - 630 mm DR 16.2
1 1/4" - 25" SDR 17
32 mm - 630 mm SDR 17

* Barrier Pipes only Certified up to 160mm (6").
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
$$ These products may also be produced with a clear, blue, orange or red barrier material
   on the outer layer of the tubing.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Pipe^ § $$ +++
 
PEX 5106
 
Terratherma PE-Xa Natural
 
ASTM F876/F877
3/8" - 1" DR 9

^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
$$ These products may also be produced with a clear, blue, orange or red barrier material
   on the outer layer of the tubing.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Pipe# ^ ¢ § $$ +++
 
PEX 5106
 
Terratherma PE-Xa Natural
 
CSA B137.5
3/8" - 1" DR 9

# Tubing certified against CSA B137.5 shall include the standard designation(s) of the
  fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
  qualified through testing.  Please verify that tubing certified against CSA B137.5 is
  only marked with the following fitting system designation(s):  ASTM F877, ASTM F2080,
  ASTM F1960.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
$$ These products may also be produced with a clear, blue, orange or red barrier material
   on the outer layer of the tubing.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Pipe# ^ ¢ § $$ +++
 
PEX 3106
 
Terratherma PE-Xa Natural
 
CSA B137.5
3/8" - 6" SDR 9

# Tubing certified against CSA B137.5 shall include the standard designation(s) of the
  fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
  qualified through testing.  Please verify that tubing certified against CSA B137.5 is
  only marked with the following fitting system designation(s):  ASTM F877, ASTM F2080,
  ASTM F1960.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
$$ These products may also be produced with a clear, blue, orange or red barrier material
   on the outer layer of the tubing.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Pipe$ * ^ +++
 
PEX 5006
 
Terratherma PE-Xc Black
 
ASTM F2788/F2788M
1/2" - 1" DR 6
16 mm - 25 mm DR 6
1/2" - 1" DR 7.4
16 mm - 25 mm DR 7.4
1/2" - 1" SDR 9
16 mm - 25 mm SDR 9
3/4" - 1" SDR 11
20 mm - 25 mm SDR 11
1" DR 13.6
25 mm DR 13.6

$ These products may also be produced with a blue, clear, or red barrier material on the
  outer layer of the tubing.
* Barrier Pipes only Certified up to 160mm (6").
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Pipe$ * ^ +++
 
PEX 5006
 
Terratherma PE-Xc Blue
 
ASTM F2788/F2788M
1/2" - 1" DR 6
16 mm - 25 mm DR 6
1/2" - 1" DR 7.4
16 mm - 25 mm DR 7.4
1/2" - 1" SDR 9
16 mm - 25 mm SDR 9
3/4" - 1" SDR 11
20 mm - 25 mm SDR 11
1" DR 13.6
25 mm DR 13.6

$ These products may also be produced with a blue, clear, or red barrier material on the
  outer layer of the tubing.
* Barrier Pipes only Certified up to 160mm (6").
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Pipe$ * ^ +++
 
PEX 5006
 
Terratherma PE-Xc Natural
 
ASTM F2788/F2788M
1/2" - 1" DR 6
16 mm - 25 mm DR 6
1/2" - 1" DR 7.4
16 mm - 25 mm DR 7.4
1/2" - 1" SDR 9
16 mm - 25 mm SDR 9
3/4" - 1" SDR 11
20 mm - 25 mm SDR 11
1" DR 13.6
25 mm DR 13.6

$ These products may also be produced with a blue, clear, or red barrier material on the
  outer layer of the tubing.
* Barrier Pipes only Certified up to 160mm (6").
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Pipe$ * ^ +++
 
PEX 5006
 
Terratherma PE-Xc Red
 
ASTM F2788/F2788M
1/2" - 1" DR 6
16 mm - 25 mm DR 6
1/2" - 1" DR 7.4
16 mm - 25 mm DR 7.4
1/2" - 1" SDR 9
16 mm - 25 mm SDR 9
3/4" - 1" SDR 11
20 mm - 25 mm SDR 11
1" DR 13.6
25 mm DR 13.6

$ These products may also be produced with a blue, clear, or red barrier material on the
  outer layer of the tubing.
* Barrier Pipes only Certified up to 160mm (6").
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Pipe$ * ^ +++
 
PEX 5006
 
Sioux Chief PE-Xc Blue
 
ASTM F2788/F2788M
1/2" - 1" DR 6
16 mm - 25 mm DR 6
1/2" - 1" DR 7.4
16 mm - 25 mm DR 7.4
1/2" - 1" SDR 9
16 mm - 25 mm SDR 9
3/4" - 1" SDR 11
20 mm - 25 mm SDR 11
1" DR 13.6
25 mm DR 13.6

$ These products may also be produced with a blue, clear, or red barrier material on the
  outer layer of the tubing.
* Barrier Pipes only Certified up to 160mm (6").
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Pipe$ * ^ +++
 
PEX 5006
 
Sioux Chief PE-Xc Natural
 
ASTM F2788/F2788M
1/2" - 1" DR 6
16 mm - 25 mm DR 6
1/2" - 1" DR 7.4
16 mm - 25 mm DR 7.4
1/2" - 1" SDR 9
16 mm - 25 mm SDR 9
3/4" - 1" SDR 11
20 mm - 25 mm SDR 11
1" DR 13.6
25 mm DR 13.6

$ These products may also be produced with a blue, clear, or red barrier material on the
  outer layer of the tubing.
* Barrier Pipes only Certified up to 160mm (6").
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Pipe$ * ^ +++
 
PEX 5006
 
Sioux Chief PE-Xc Red
 
ASTM F2788/F2788M
1/2" - 1" DR 6
16 mm - 25 mm DR 6
1/2" - 1" DR 7.4
16 mm - 25 mm DR 7.4
1/2" - 1" SDR 9
16 mm - 25 mm SDR 9
3/4" - 1" SDR 11
20 mm - 25 mm SDR 11
1" DR 13.6
25 mm DR 13.6

$ These products may also be produced with a blue, clear, or red barrier material on the
  outer layer of the tubing.
* Barrier Pipes only Certified up to 160mm (6").
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).


Radiant Floor Heating

Product Type   Material Type   Trade Name   Product Standard

Pipe¢ § $$
 
PEX 3106
 
Sioux Chief PEX PE-Xa Natural
 
ASTM F876/F877
3/8" - 6" SDR 9

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
$$ These products may also be produced with a clear, blue, orange or red barrier material
   on the outer layer of the tubing.

Pipe# ¢ § $$
 
PEX 3106
 
Sioux Chief PEX PE-Xa Natural
 
CSA B137.5
3/8" - 6" SDR 9

# Tubing certified against CSA B137.5 shall include the standard designation(s) of the
  fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
  qualified through testing.  Please verify that tubing certified against CSA B137.5 is
  only marked with the following fitting system designation(s):  ASTM F877, ASTM F2080,
  ASTM F1960.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
$$ These products may also be produced with a clear, blue, orange or red barrier material
   on the outer layer of the tubing.

Pipe$ §
 
PEX 5006
 
Sioux Chief PEX PE-Xc Natural
 
ASTM F876/F877
1/4" - 1" SDR 9

$ These products may also be produced with a blue, clear, or red barrier material on the
  outer layer of the tubing.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.

Pipe$ §
 
PEX 5006
 
Sioux Chief PEX PE-Xc Black
 
ASTM F876/F877
1/4" - 1" SDR 9

$ These products may also be produced with a blue, clear, or red barrier material on the
  outer layer of the tubing.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.

Pipe$ §
 
PEX 5006
 
Sioux Chief PEX PE-Xc Blue
 
ASTM F876/F877
1/4" - 1" SDR 9

$ These products may also be produced with a blue, clear, or red barrier material on the
  outer layer of the tubing.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.

Pipe$ §
 
PEX 5006
 
Sioux Chief PEX PE-Xc Red
 
ASTM F876/F877
1/4" - 1" SDR 9

$ These products may also be produced with a blue, clear, or red barrier material on the
  outer layer of the tubing.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.

Pipe$ §
 
PEX 5006
 
Slant/Fin Heating PE-Xc Black
 
ASTM F876/F877
1/4" - 1" SDR 9

$ These products may also be produced with a blue, clear, or red barrier material on the
  outer layer of the tubing.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.

Pipe$ §
 
PEX 5006
 
Slant/Fin Heating PE-Xc Blue
 
ASTM F876/F877
1/4" - 1" SDR 9

$ These products may also be produced with a blue, clear, or red barrier material on the
  outer layer of the tubing.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.

Pipe¢ § $$
 
PEX 3106
 
Slant/Fin Heating PE-Xa Natural
 
ASTM F876/F877
3/8" - 6" SDR 9

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
$$ These products may also be produced with a clear, blue, orange or red barrier material
   on the outer layer of the tubing.

Pipe# ¢ § $$
 
PEX 3106
 
Slant/Fin Heating PE-Xa Natural
 
CSA B137.5
3/8" - 6" SDR 9

# Tubing certified against CSA B137.5 shall include the standard designation(s) of the
  fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
  qualified through testing.  Please verify that tubing certified against CSA B137.5 is
  only marked with the following fitting system designation(s):  ASTM F877, ASTM F2080,
  ASTM F1960.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
$$ These products may also be produced with a clear, blue, orange or red barrier material
   on the outer layer of the tubing.

Pipe$ §
 
PEX 5006
 
Slant/Fin Heating PE-Xc Natural
 
ASTM F876/F877
1/4" - 1" SDR 9

$ These products may also be produced with a blue, clear, or red barrier material on the
  outer layer of the tubing.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.

Pipe$ §
 
PEX 5006
 
Slant/Fin Heating PE-Xc Red
 
ASTM F876/F877
1/4" - 1" SDR 9

$ These products may also be produced with a blue, clear, or red barrier material on the
  outer layer of the tubing.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.

Pipe¢ § $$
 
PEX 3106
 
Slant/Fin Plumbing PE-Xa Natural
 
ASTM F876/F877
3/8" - 6" SDR 9

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
$$ These products may also be produced with a clear, blue, orange or red barrier material
   on the outer layer of the tubing.

Pipe# ¢ § $$
 
PEX 3106
 
Slant/Fin Plumbing PE-Xa Natural
 
CSA B137.5

# Tubing certified against CSA B137.5 shall include the standard designation(s) of the
  fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
  qualified through testing.  Please verify that tubing certified against CSA B137.5 is
  only marked with the following fitting system designation(s):  ASTM F877, ASTM F2080,
  ASTM F1960.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
$$ These products may also be produced with a clear, blue, orange or red barrier material
   on the outer layer of the tubing.

Pipe$ §
 
PEX 5006
 
Slant/Fin Plumbing PE-Xc Natural
 
ASTM F876/F877
1/4" - 1" SDR 9

$ These products may also be produced with a blue, clear, or red barrier material on the
  outer layer of the tubing.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.

Pipe$ §
 
PEX 5006
 
Slant/Fin Plumbing PE-Xc Black
 
ASTM F876/F877
1/4" - 1" SDR 9

$ These products may also be produced with a blue, clear, or red barrier material on the
  outer layer of the tubing.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.

Pipe$ §
 
PEX 5006
 
Slant/Fin Plumbing PE-Xc Blue
 
ASTM F876/F877
1/4" - 1" SDR 9

$ These products may also be produced with a blue, clear, or red barrier material on the
  outer layer of the tubing.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.

Pipe$ §
 
PEX 5006
 
Slant/Fin Plumbing PE-Xc Red
 
ASTM F876/F877
3/8" - 1" SDR 9

$ These products may also be produced with a blue, clear, or red barrier material on the
  outer layer of the tubing.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.

Pipe¢ § $$
 
PEX 3106
 
Pexgol PE-Xa Natural
 
ASTM F876/F877
3/8" - 6" SDR 9

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
$$ These products may also be produced with a clear, blue, orange or red barrier material
   on the outer layer of the tubing.

Pipe# ¢ § $$
 
PEX 3106
 
Pexgol PE-Xa Natural
 
CSA B137.5
3/8" - 6" SDR 9

# Tubing certified against CSA B137.5 shall include the standard designation(s) of the
  fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
  qualified through testing.  Please verify that tubing certified against CSA B137.5 is
  only marked with the following fitting system designation(s):  ASTM F877, ASTM F2080,
  ASTM F1960.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
$$ These products may also be produced with a clear, blue, orange or red barrier material
   on the outer layer of the tubing.

Pipe$ §
 
PEX 5006
 
Pexgol PE-Xc Natural
 
ASTM F876/F877
1/4" - 1" SDR 9

$ These products may also be produced with a blue, clear, or red barrier material on the
  outer layer of the tubing.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.

Pipe$ §
 
PEX 5006
 
Pexgol PE-Xc Black
 
ASTM F876/F877
1/4" - 1" SDR 9

$ These products may also be produced with a blue, clear, or red barrier material on the
  outer layer of the tubing.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.

Pipe$ §
 
PEX 5006
 
Pexgol PE-Xc Blue
 
ASTM F876/F877
1/4" - 1" SDR 9

$ These products may also be produced with a blue, clear, or red barrier material on the
  outer layer of the tubing.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.

Pipe$ §
 
PEX 5006
 
Pexgol PE-Xc Red
 
ASTM F876/F877
1/4" - 1" SDR 9

$ These products may also be produced with a blue, clear, or red barrier material on the
  outer layer of the tubing.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.

Pipe¢ § $$
 
PEX 3106
 
Terratherma PE-Xa Natural
 
ASTM F876/F877
3/8" - 6" SDR 9

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
$$ These products may also be produced with a clear, blue, orange or red barrier material
   on the outer layer of the tubing.

Pipe# ¢ § $$
 
PEX 3106
 
Terratherma PE-Xa Natural
 
CSA B137.5
3/8" - 6" SDR 9

# Tubing certified against CSA B137.5 shall include the standard designation(s) of the
  fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
  qualified through testing.  Please verify that tubing certified against CSA B137.5 is
  only marked with the following fitting system designation(s):  ASTM F877, ASTM F2080,
  ASTM F1960.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
$$ These products may also be produced with a clear, blue, orange or red barrier material
   on the outer layer of the tubing.

Pipe$ §
 
PEX 5006
 
Terratherma PE-Xc Natural
 
ASTM F876/F877
1/4" - 1" SDR 9

$ These products may also be produced with a blue, clear, or red barrier material on the
  outer layer of the tubing.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.

Pipe$ §
 
PEX 5006
 
Terratherma PE-Xc Black
 
ASTM F876/F877
1/4" - 1" SDR 9

$ These products may also be produced with a blue, clear, or red barrier material on the
  outer layer of the tubing.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.

Pipe$ §
 
PEX 5006
 
Terratherma PE-Xc Blue
 
ASTM F876/F877
1/4" - 1" SDR 9

$ These products may also be produced with a blue, clear, or red barrier material on the
  outer layer of the tubing.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.

Pipe$ §
 
PEX 5006
 
Terratherma PE-Xc Red
 
ASTM F876/F877
1/4" - 1" SDR 9

$ These products may also be produced with a blue, clear, or red barrier material on the
  outer layer of the tubing.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.

Pipe¢ § $$
 
PEX 3106
 
AquaSeal PE-Xa Natural
 
ASTM F876/F877
3/8" - 6" SDR 9

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
$$ These products may also be produced with a clear, blue, orange or red barrier material
   on the outer layer of the tubing.

Pipe# ¢ § $$
 
PEX 3106
 
AquaSeal PE-Xa Natural
 
CSA B137.5
3/8" - 6" SDR 9

# Tubing certified against CSA B137.5 shall include the standard designation(s) of the
  fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
  qualified through testing.  Please verify that tubing certified against CSA B137.5 is
  only marked with the following fitting system designation(s):  ASTM F877, ASTM F2080,
  ASTM F1960.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
$$ These products may also be produced with a clear, blue, orange or red barrier material
   on the outer layer of the tubing.

Pipe$ §
 
PEX 5006
 
AquaSeal PE-Xc Natural
 
ASTM F876/F877
1/4" - 1" SDR 9

$ These products may also be produced with a blue, clear, or red barrier material on the
  outer layer of the tubing.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.

Pipe$ §
 
PEX 5006
 
AquaSeal PE-Xc Black
 
ASTM F876/F877
1/4" - 1" SDR 9

$ These products may also be produced with a blue, clear, or red barrier material on the
  outer layer of the tubing.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.

Pipe$ §
 
PEX 5006
 
AquaSeal PE-Xc Blue
 
ASTM F876/F877
1/4" - 1" SDR 9

$ These products may also be produced with a blue, clear, or red barrier material on the
  outer layer of the tubing.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.

Pipe$ §
 
PEX 5006
 
AquaSeal PE-Xc Red
 
ASTM F876/F877
1/4" - 1" SDR 9

$ These products may also be produced with a blue, clear, or red barrier material on the
  outer layer of the tubing.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.

Pipe¢ § $$
 
PEX 3106
 
AquaHeat PE-Xa Natural
 
ASTM F876/F877
3/8" - 6" SDR 9

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
$$ These products may also be produced with a clear, blue, orange or red barrier material
   on the outer layer of the tubing.

Pipe# ¢ § $$
 
PEX 3106
 
AquaHeat PE-Xa Natural
 
CSA B137.5
3/8" - 6" SDR 9

# Tubing certified against CSA B137.5 shall include the standard designation(s) of the
  fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
  qualified through testing.  Please verify that tubing certified against CSA B137.5 is
  only marked with the following fitting system designation(s):  ASTM F877, ASTM F2080,
  ASTM F1960.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
$$ These products may also be produced with a clear, blue, orange or red barrier material
   on the outer layer of the tubing.

Pipe$ §
 
PEX 5006
 
AquaHeat PE-Xc Natural
 
ASTM F876/F877
1/4" - 1" SDR 9

$ These products may also be produced with a blue, clear, or red barrier material on the
  outer layer of the tubing.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.

Pipe$ §
 
PEX 5006
 
AquaHeat PE-Xc Black
 
ASTM F876/F877
1/4" - 1" SDR 9

$ These products may also be produced with a blue, clear, or red barrier material on the
  outer layer of the tubing.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.

Pipe$ §
 
PEX 5006
 
AquaHeat PE-Xc Blue
 
ASTM F876/F877
1/4" - 1" SDR 9

$ These products may also be produced with a blue, clear, or red barrier material on the
  outer layer of the tubing.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.

Pipe$ §
 
PEX 5006
 
AquaHeat PE-Xc Red
 
ASTM F876/F877
1/4" - 1" SDR 9

$ These products may also be produced with a blue, clear, or red barrier material on the
  outer layer of the tubing.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.

Pipe! &
 
PEX 5006
 
PENTAGOL
 
ASTM F876/F877
1/2", 5/8" SDR 9

! Tubing certified against CSA B137.5 shall include the standard designation(s) of the
  fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
  qualified through testing. Please verify that tubing certified against CSA B137.5 is
  only marked with the following fitting system designation(s): ASTM F2080, ASTM F1960.
& This is a 5 layer construction pipe (PEX-adhesive-EVOH-adhesive-PEX). This product is
  produced in red, blue, black and natural.

Pipe! & ¢
 
PEX 5006
 
PENTAGOL
 
CSA B137.5
1/2", 5/8" SDR 9

! Tubing certified against CSA B137.5 shall include the standard designation(s) of the
  fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
  qualified through testing. Please verify that tubing certified against CSA B137.5 is
  only marked with the following fitting system designation(s): ASTM F2080, ASTM F1960.
& This is a 5 layer construction pipe (PEX-adhesive-EVOH-adhesive-PEX). This product is
  produced in red, blue, black and natural.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.

Pipe¢ § $$
 
PEX 3106
 
Plumber Friendly PE-Xa Natural
 
ASTM F876/F877
3/8" - 6" SDR 9

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
$$ These products may also be produced with a clear, blue, orange or red barrier material
   on the outer layer of the tubing.

Pipe# ¢ § $$
 
PEX 3106
 
Plumber Friendly PE-Xa Natural
 
CSA B137.5
3/8" - 6" SDR 9

# Tubing certified against CSA B137.5 shall include the standard designation(s) of the
  fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
  qualified through testing.  Please verify that tubing certified against CSA B137.5 is
  only marked with the following fitting system designation(s):  ASTM F877, ASTM F2080,
  ASTM F1960.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
$$ These products may also be produced with a clear, blue, orange or red barrier material
   on the outer layer of the tubing.

Pipe$ §
 
PEX 5006
 
Plumber Friendly PE-Xc Natural
 
ASTM F876/F877
1/4" - 1" SDR 9

$ These products may also be produced with a blue, clear, or red barrier material on the
  outer layer of the tubing.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.

Pipe$ §
 
PEX 5006
 
Plumber Friendly PE-Xc Black
 
ASTM F876/F877
1/4" - 1" SDR 9

$ These products may also be produced with a blue, clear, or red barrier material on the
  outer layer of the tubing.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.

Pipe$ §
 
PEX 5006
 
Plumber Friendly PE-Xc Blue
 
ASTM F876/F877
1/4" - 1" SDR 9

$ These products may also be produced with a blue, clear, or red barrier material on the
  outer layer of the tubing.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.

Pipe$ §
 
PEX 5006
 
Plumber Friendly PE-Xc Red
 
ASTM F876/F877
1/4" - 1" SDR 9

$ These products may also be produced with a blue, clear, or red barrier material on the
  outer layer of the tubing.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.



 
HAB Inc. 
306 Broadway
Providencia, RI 02908 
United States 
508-615-1308

Facility : Barcelona, Spain

Potable Water - Pipe and Fittings

Product Type   Material Type   Trade Name   Product Standard

Pipe* @ ¢ § +++ [G]
 
PEX 5106
 
HAB
 
ASTM F876/F877
3/8" - 2"

* Natural (Solid Wall) PEX Pipe Certified 3/8"" - 2""sizes.  Red, blue, white or orange
  PEX pipe (2 layer pipe - natural with colored adhesive pipe) certified for 3/8"" - 2""
  sizes. Tubing certified against CSA B137.5 shall include the standard designation(s) of
  the fitting system(s) for which the tubing is recommended by the manufacturer, and shall
  be marked, as applicable, with the following fitting system designation(s): ASTM F1960,
  ASTM F1807, ASTM F2159, and ASTM F2098.
@ PEX 5106: Meets the chlorine resistance requirements of ASTM F876 when tested in
  accordance with ASTM F2023. 
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Pipe* @ ¢ § +++ [G]
 
PEX 5106
 
HAB
 
CSA B137.5
3/8" - 2"

* Natural (Solid Wall) PEX Pipe Certified 3/8"" - 2""sizes.  Red, blue, white or orange
  PEX pipe (2 layer pipe - natural with colored adhesive pipe) certified for 3/8"" - 2""
  sizes. Tubing certified against CSA B137.5 shall include the standard designation(s) of
  the fitting system(s) for which the tubing is recommended by the manufacturer, and shall
  be marked, as applicable, with the following fitting system designation(s): ASTM F1960,
  ASTM F1807, ASTM F2159, and ASTM F2098.
@ PEX 5106: Meets the chlorine resistance requirements of ASTM F876 when tested in
  accordance with ASTM F2023. 
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    


Radiant Floor Heating

Product Type   Material Type   Trade Name   Product Standard

Tubing* @ ¢ §
 
PEX 5106
 
HAB
 
ASTM F876/F877
3/8" - 2"

* Monowall pipe (natural); Skinned pipe (red, blue, white and orange); and Barrier pipe
  (red, blue, white and orange) are certified for the following sizes: 3/8", 1/2", 5/8",
  3/4", 1", 1-1/4", 1-1/2" & 2".
  
  Tubing certified against CSA B137.5 shall include the standard designation(s) of the
  fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
  marked, as applicable with the following fitting system designation(s): ASTM F1960, ASTM
  F1807, ASTM F2159, and ASTM F2098.			
  
@ This tubing product has been evaluated against the performance requirements of ASTM
  F876/877 and CSA B137.5.  This product is not NSF Certified for use in a potable water
  distribution system.  This product has been evaluated for use in radiant floor heating,
  (NSF-rfh), applications only.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.

Tubing* @ ¢ §
 
PEX 5106
 
HAB
 
CSA B137.5
3/8" - 2"

* Monowall pipe (natural); Skinned pipe (red, blue, white and orange); and Barrier pipe
  (red, blue, white and orange) are certified for the following sizes: 3/8", 1/2", 5/8",
  3/4", 1", 1-1/4", 1-1/2" & 2".
  
  Tubing certified against CSA B137.5 shall include the standard designation(s) of the
  fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
  marked, as applicable with the following fitting system designation(s): ASTM F1960, ASTM
  F1807, ASTM F2159, and ASTM F2098.			
  
@ This tubing product has been evaluated against the performance requirements of ASTM
  F876/877 and CSA B137.5.  This product is not NSF Certified for use in a potable water
  distribution system.  This product has been evaluated for use in radiant floor heating,
  (NSF-rfh), applications only.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.

NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
      documentation shipped with the product are Certified.				
      


 
HDC Hyundai Engineering Plastics Co., Ltd. 
1221-32 Daehoman-ro, Seokmum-myeon
Dangjin-si, Chungnam 343-856 
Korea, Republic of 
82 41 350 0593
Visit this company's website

Facility : Chungcheongnam-do, Korea, Republic of

Potable Water - Materials

Material Type End Use Trade Name Product Standard
PEX 5306* ^ ¢ +++ 1 Polylink XP650/XC200 (Black) N/A
PEX 5106* ^ ¢ +++ 1 Polylink XP650/XC200 (Natural) N/A
PEX 5306* ^ ¢ +++ 1 Polylink XP650/XC200 (Red) N/A
PEX 5306* ^ ¢ +++ 1 Polylink XP650/XC200 (White) N/A
PEX 5306* ^ ¢ +++ 1 Polylink XP650/XC200B (Blue) N/A

* Tubing manufactured from this material is cure process dependent.  Use of this material
  in NSF Standard 14/61 Certified pipe requires NSF's prior authorization.  Tubing
  produced from this material was evaluated for 1/2" and greater diameters.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).



 
Heatlink Group 
4306E-13 Street NE
Calgary, AB T2E 6M3 
Canada 
403-717-3820

Facility : P3 USA

Surface Burning Characteristics of Building Materials

Product Type   Material Type   Trade Name   Product Standard

Tubing^ § **
 
PEX
 
PureLink Plus
 
ASTM E84
1/2", 3/4"

^ Flame Spread Index <= 25, Smoke Developed Index <= 50
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
** Flame Spread Index and Smoke Developed Index based on minimum spacing of 18 inches
   between tubing runs. Tubing shall be marked [NSF®-fs ASTM E84 FS<=25/SD<=50].

Tubing^ § **
 
PEX
 
SureLink
 
ASTM E84
1/2", 3/4"

^ Flame Spread Index <= 25, Smoke Developed Index <= 50
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
** Flame Spread Index and Smoke Developed Index based on minimum spacing of 18 inches
   between tubing runs. Tubing shall be marked [NSF®-fs ASTM E84 FS<=25/SD<=50].


Potable Water - Pipe and Fittings

Product Type   Material Type   Trade Name   Product Standard

Tubing! # * ¢ § ++ [G]
 
PEX 5106/5306
 
PureLink Plus
 
ASTM F876/F877
3/8" - 2"

! Certified for blue, natural, red colors, PEX 5106 only.
# Certified for Blue and Red adhesive outer layer.
* Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
   temperatures up to and including Domestic Hot (140° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Tubing! # * ^ ~ ¢ § ++ [1] [G]
 
PEX 5106/5306
 
PureLink Plus
 
CSA B137.5
3/8" - 2"

! Certified for blue, natural, red colors, PEX 5106 only.
# Certified for Blue and Red adhesive outer layer.
* Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
^ Pipe may have a blue, red or white coating, PEX 5106 only.
~ Pipe may utilize blue, red, or black colored ink on the printline.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
   temperatures up to and including Domestic Hot (140° F).
[1]  Tubing certified against CSA B137.5 shall include the standard designation(s) of the
    fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
    marked, as applicable, with the following fitting system designation(s): ASTM F877, ASTM
    F2159, ASTM F1807, ASTM F1960, ASTM F2098, and ASSE 1061.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Tubing# * ¢ § ++ [G]
 
PEX 5306
 
PureLink Plus
 
AWWA C904
1/2" - 2" SDR 9

# Certified for Blue and Red adhesive outer layer.
* Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
   temperatures up to and including Domestic Hot (140° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Tubing! # * ^ ~ ¢ § ++ [G]
 
PEX 5106/5306
 
SureLink
 
ASTM F876/F877
3/8" - 2"

! Certified for blue, natural, red colors, PEX 5106 only.
# Certified for Blue and Red adhesive outer layer.
* Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
^ Pipe may have a blue, red or white coating, PEX 5106 only.
~ Pipe may utilize blue, red, or black colored ink on the printline.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
   temperatures up to and including Domestic Hot (140° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Tubing! # * ^ ~ ¢ § ++ [1] [G]
 
PEX 5106/5306
 
SureLink
 
CSA B137.5
3/8" - 2"

! Certified for blue, natural, red colors, PEX 5106 only.
# Certified for Blue and Red adhesive outer layer.
* Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
^ Pipe may have a blue, red or white coating, PEX 5106 only.
~ Pipe may utilize blue, red, or black colored ink on the printline.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
   temperatures up to and including Domestic Hot (140° F).
[1]  Tubing certified against CSA B137.5 shall include the standard designation(s) of the
    fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
    marked, as applicable, with the following fitting system designation(s): ASTM F877, ASTM
    F2159, ASTM F1807, ASTM F1960, ASTM F2098, and ASSE 1061.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Tubing# * ¢ § ++ [G]
 
PEX 5306
 
SureLink
 
AWWA C904
1/2" - 2" SDR 9

# Certified for Blue and Red adhesive outer layer.
* Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
   temperatures up to and including Domestic Hot (140° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    


Facility : Calgary, Alberta, Canada

Surface Burning Characteristics of Building Materials

Product Type   Material Type   Trade Name   Product Standard

Tubing^ § **
 
PEX
 
PureLink Plus
 
ASTM E84
1/2", 3/4"

^ Flame Spread Index <= 25, Smoke Developed Index <= 50
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
** Flame Spread Index and Smoke Developed Index based on minimum spacing of 18 inches
   between tubing runs.  Tubing shall be marked [NSF®-fs ASTM E84 FS<=25/SD<=50].

Tubing^ § **
 
PEX
 
SureLink
 
ASTM E84
1/2", 3/4"

^ Flame Spread Index <= 25, Smoke Developed Index <= 50
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
** Flame Spread Index and Smoke Developed Index based on minimum spacing of 18 inches
   between tubing runs.  Tubing shall be marked [NSF®-fs ASTM E84 FS<=25/SD<=50].


Potable Water - Pipe and Fittings

Product Type   Material Type   Trade Name   Product Standard

Tubing! # * ^ ~ ¢ § ++ [G]
 
PEX 5106/5306
 
PureLink Plus
 
ASTM F876/F877
3/8" - 2"

! Certified for blue, natural, red colors, PEX 5106 only.
# Certified for Blue and Red adhesive outer layer, PEX 5306 only.
* Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
^ Pipe may have a blue, red or white coating, PEX 5106 only.
~ Pipe may utilize blue, red, or black colored ink on the printline.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
   temperatures up to and including Domestic Hot (140° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Tubing! # * ^ ~ ¢ § ++ [1] [G]
 
PEX 5106/5306
 
PureLink Plus
 
CSA B137.5
3/8" - 2"

! Certified for blue, natural, red colors, PEX 5106 only.
# Certified for Blue and Red adhesive outer layer, PEX 5306 only.
* Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
^ Pipe may have a blue, red or white coating, PEX 5106 only.
~ Pipe may utilize blue, red, or black colored ink on the printline.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
   temperatures up to and including Domestic Hot (140° F).
[1] Tubing certified against CSA B137.5 shall include the standard designation(s) of the
    fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
    marked, as applicable, with the following fitting system designation(s): ASTM F877, ASTM
    F2159, ASTM F1807, ASTM F1960, ASTM F2098, and ASSE 1061.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Tubing# * ~ ¢ § ++ [G]
 
PEX 5306
 
PureLink Plus
 
AWWA C904
1/2" - 2" SDR 9

# Certified for Blue and Red adhesive outer layer, PEX 5306 only.
* Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
~ Pipe may utilize blue, red, or black colored ink on the printline.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
   temperatures up to and including Domestic Hot (140° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Tubing! # * ^ ~ ¢ § ++ [G]
 
PEX 5106/5306
 
SureLink
 
ASTM F876/F877
3/8" - 2"

! Certified for blue, natural, red colors, PEX 5106 only.
# Certified for Blue and Red adhesive outer layer, PEX 5306 only.
* Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
^ Pipe may have a blue, red or white coating, PEX 5106 only.
~ Pipe may utilize blue, red, or black colored ink on the printline.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
   temperatures up to and including Domestic Hot (140° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Tubing! # * ~ ¢ § ++ [1] [G]
 
PEX 5106/5306
 
SureLink
 
CSA B137.5
3/8" - 2"

! Certified for blue, natural, red colors, PEX 5106 only.
# Certified for Blue and Red adhesive outer layer, PEX 5306 only.
* Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
~ Pipe may utilize blue, red, or black colored ink on the printline.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
   temperatures up to and including Domestic Hot (140° F).
[1] Tubing certified against CSA B137.5 shall include the standard designation(s) of the
    fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
    marked, as applicable, with the following fitting system designation(s): ASTM F877, ASTM
    F2159, ASTM F1807, ASTM F1960, ASTM F2098, and ASSE 1061.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Tubing# * ~ ¢ § ++ [G]
 
PEX 5306
 
SureLink
 
AWWA C904
1/2" - 2" SDR 9

# Certified for Blue and Red adhesive outer layer, PEX 5306 only.
* Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
~ Pipe may utilize blue, red, or black colored ink on the printline.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
   temperatures up to and including Domestic Hot (140° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    


Reclaimed Water - Pipe and Fittings

Product Type   Material Type   Trade Name   Product Standard

Tubing¢
 
PEX 5106
 
PureLink Reclaim
 
ASTM F876/F877
3/8" - 2"

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.

Tubing¢ [1]
 
PEX 5106
 
PureLink Reclaim
 
CSA B137.5
3/8" - 2"

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Tubing certified against CSA B137.5 shall include the standard designation(s) of the
    fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
    marked, as applicable, with the following fitting system designation(s): ASTM F877, ASTM
    F2159, ASTM F1807, ASTM F1960, and ASTM F2098.


Radiant Floor Heating

Product Type   Material Type   Trade Name   Product Standard

Tubing* @ ^ ¢ ¥
 
PEX 0306
 
HeatLink
 
ASTM F876/F877
3/8" - 1 1/2"

* Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
@ This barrier tubing product has been evaluated against the performance requirements of
  ASTM F876/F877. This product is not NSF Certified for use in a potable water
  distribution system. This product has been evaluated for use in radiant floor heating
  (NSF-rfh) applications only.
^ Available in black, orange and red.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
¥ Product is Certified to the Uniform Mechanical Code™. Installation in accordance with
  the manufacturer's instructions and the requirements of the latest edition of the
  Uniform Mechanical Code™.

Tubing* @ ^ ¢ ¥
 
PEX 5106
 
HeatLink
 
ASTM F876/F877
3/8" - 1 1/2"

* Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
@ This barrier tubing product has been evaluated against the performance requirements of
  ASTM F876/F877. This product is not NSF Certified for use in a potable water
  distribution system. This product has been evaluated for use in radiant floor heating
  (NSF-rfh) applications only.
^ Available in black, orange and red.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
¥ Product is Certified to the Uniform Mechanical Code™. Installation in accordance with
  the manufacturer's instructions and the requirements of the latest edition of the
  Uniform Mechanical Code™.

Tubing* @ ^ ¢ ¥ [1]
 
PEX
 
HeatLink
 
CSA B137.5
3/8" - 1 1/2"

* Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
@ This barrier tubing product has been evaluated against the performance requirements of
  ASTM F876/F877. This product is not NSF Certified for use in a potable water
  distribution system. This product has been evaluated for use in radiant floor heating
  (NSF-rfh) applications only.
^ Available in black, orange and red.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
¥ Product is Certified to the Uniform Mechanical Code™. Installation in accordance with
  the manufacturer's instructions and the requirements of the latest edition of the
  Uniform Mechanical Code™.
[1] Tubing certified against CSA B137.5 shall include the standard designation(s) of the
    fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
    marked, as applicable, with the following fitting system designation(s): ASTM F877, ASTM
    F2159, ASTM F1807, ASTM F1960, ASTM F2098, and ASSE 1061.



 
HeatLink Group 
3615 32 Street Northeast
Calgary, AB T1Y 5Y9 
Canada 
800-661-5332 
403-717-3820
Visit this company's website

Facility : A Sweden

Radiant Floor Heating

Product Type   Material Type   Trade Name   Product Standard

Tubing# *
 
PEX 0006
 
HeatLink (Natural tubing with O2 barrier)
 
ASTM F876/F877
3/8", 1/2", 5/8", 3/4", 1", 1 1/4", 1 1/2", 2" SDR 9

# This barrier tubing product has been evaluated against the performance requirements of
  ASTM F876/F877.  This product is not NSF Certified for use in a potable water
  distribution system.  This product has been evaluated for use in radiant floor heating,
  (NSF-rfh), applications only.
* Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.



 
HongYue Plastic Group Co., Ltd. DBA OnePlus Piping Systems Inc. 
#81, LongHai Road, Economic & Tech
Development Zone, Qinhuangdao City 
Heibei Province 066004 
China 
86 335 888 6666
Visit this company's website

Facility : Heibei Province, China

Potable Water - Pipe and Fittings

Product Type   Material Type   Trade Name   Product Standard

Fittings[1]
 
PEX
 
 
ASTM F1960

One Plus PEX Ring
1/2" - 2"  

[1] PEX rings are non-wetted components of PEX fitting systems.

PEX Ring with Stop[1]
 
PEX
 
 
ASTM F1960
3/8" (ring38)   5/8" (ring58)   1/2" (ring12)   3/4" (ring34)  
1" (ring1)   1 1/4" (ring114)   1 1/2" (ring112)   2" (ring2)  

[1] PEX rings are non-wetted components of PEX fitting systems.

PEX Ring with Stop¢ [1]
 
PEX
 
 
CSA B137.5
1/2" (ring12)   3/4" (ring34)   3/8" (ring38)   5/8" (ring58)  
1" (ring1)   1 1/4" (ring114)   1 1/2" (ring112)   2" (ring2)  

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] PEX rings are non-wetted components of PEX fitting systems.

Pipe! § +++ [G]
 
PEX 5306
 
 
ASTM F876/F877
1/4" - 2"  

! Certified for natural,red, white and blue without oxygen barrier. 
  Natural - PEX 5006; Red, white, blue- PEX 5306
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Tubing! ¢ § +++ [2] [G]
 
PEX 5306
 
 
CSA B137.5
1/4" - 2"  

! Certified for natural,red, white and blue without oxygen barrier. 
  Natural - PEX 5006; Red, white, blue- PEX 5306
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[2] Pipe Certified against CSA B137.5 shall include the standard designation(s) of the
    fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
    marked with the following fitting system designations: ASTM F1807, ASTM F2159.	
    
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    


Radiant Floor Heating

Product Type   Material Type   Trade Name   Product Standard

Fittings[1]
 
PEX
 
 
ASTM F1960

One Plus PEX Ring
1/2" - 2"  

[1] PEX rings are non-wetted components of PEX fitting systems.

PEX Ring with Stop[1]
 
PEX
 
 
ASTM F1960
1 1/2" (ring112)   1 1/4" (ring114)   1" (ring1)   1/2" (ring12)  
2" (ring2)   3/4" (ring34)   3/8" (ring38)   5/8" (ring58)  

[1] PEX rings are non-wetted components of PEX fitting systems.

PEX Ring with Stop[1]
 
PEX
 
 
CSA B137.5
1 1/2" (ring112)   5/8" (ring58)   1 1/4" (ring114)   1" (ring1)  
1/2" (ring12)   2" (ring2)   3/4" (ring34)   3/8" (ring38)  

[1] PEX rings are non-wetted components of PEX fitting systems.

Pipe! § +++ [G]
 
PEX 5306
 
 
ASTM F876/F877
1/4" - 2"  

! Certified for natural,red, white and blue without oxygen barrier.
  Natural - PEX 5006; Red, white, blue - PEX 5306.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Tubing! ¢ § +++ [2] [G]
 
PEX 5306
 
 
CSA B137.5
1/4" - 2"  

! Certified for natural,red, white and blue without oxygen barrier.
  Natural - PEX 5006; Red, white, blue - PEX 5306.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[2] Pipe Certified against CSA B137.5 shall include the standard designation(s) of the
    fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
    marked with the following fitting system designations:  ASTM F1807, ASTM F2159.
    
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    



 
Infloor Sales & Service 
503 Gregg Drive
Buena Vista, CO 81211 
United States 
800-608-0562 
719-395-3400
Visit this company's website

Facility : Peculiar, MO

Radiant Floor Heating

Product Type   Material Type   Trade Name   Product Standard

Tubing! % ^ §
 
PEX 5006
 
BPEX Tubing Oxygen Barrier
 
ASTM F876/F877
1/8" - 1"

! Product may or may not bear the NSF U.P. code marking.
% Certified product is orange or natural in color.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.

Tubing% ^ ¢
 
PEX 5006
 
BPEX Tubing Oxygen Barrier
 
CSA B137.5
1/8" - 1"

% Certified product is orange or natural in color.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.



 
IPEX Incorporated 
3 Place Du Commerce, Suite 101
Île-Des-Soeurs 
Verdun, QC H3E 1H7 
Canada 
514-769-2200
Visit this company's website

Facility : L'Assomption, Québec, Canada

Potable Water - Pipe and Fittings

Product Type   Material Type   Trade Name   Product Standard

Pipe^ ¢ § ** +++ [G]
 
PEX 5106/5306
 
Blue 904
 
ASTM F876/F877
3/4" - 2" SDR 9

^ Meets the Chlorine Resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
** Certified Blue 904 tubing is blue in color.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Pipe^ ¢ § ** +++ [G]
 
PEX 5306
 
Blue 904
 
AWWA C904
3/4" - 2" SDR 9

^ Meets the Chlorine Resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
** Certified Blue 904 tubing is blue in color.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Pipe^ ¢ ** +++ [G]
 
PEX
 
Blue 904
 
CSA B137.5
3/4" - 2" SDR 9

^ Meets the Chlorine Resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
** Certified Blue 904 tubing is blue in color.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    



 
Jones Stephens Corp. 
3249 Moody Parkway
P.O. Box 580 
Moody, AL 35004 
United States 
800-355-6637
Visit this company's website

Facility : Barcelona, Spain

Potable Water - Pipe and Fittings

Product Type   Material Type   Trade Name   Product Standard

Pipe* @ ¢ § +++ [G]
 
PEX 5106
 
JONES STEPHENS
 
ASTM F876/F877
3/8" - 2"

* Natural (Solid Wall) PEX Pipe Certified 3/8" - 2"sizes.  Red, blue, white or orange PEX
  pipe (2 layer pipe - natural with colored adhesive pipe) certified for 3/8" - 1" sizes. 
  Tubing certified against CSA B137.5 shall include the standard designation(s) of the
  fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
  marked, as applicable, with the following fitting system designation(s): ASTM F1960,
  ASTM F1807, ASTM F2159, and ASTM F2098.
@ PEX 5106: Meets the chlorine resistance requirements of ASTM F876 when tested in
  accordance with ASTM F2023.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Pipe* @ ¢ § +++ [G]
 
PEX 5106
 
JONES STEPHENS
 
CSA B137.5
3/8" - 2"

* Natural (Solid Wall) PEX Pipe Certified 3/8" - 2"sizes.  Red, blue, white or orange PEX
  pipe (2 layer pipe - natural with colored adhesive pipe) certified for 3/8" - 1" sizes. 
  Tubing certified against CSA B137.5 shall include the standard designation(s) of the
  fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
  marked, as applicable, with the following fitting system designation(s): ASTM F1960,
  ASTM F1807, ASTM F2159, and ASTM F2098.
@ PEX 5106: Meets the chlorine resistance requirements of ASTM F876 when tested in
  accordance with ASTM F2023.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    


Radiant Floor Heating

Product Type   Material Type   Trade Name   Product Standard

Tubing* @ ¢ §
 
PEX 5106
 
JONES STEPHENS
 
ASTM F876/F877
3/8" - 2"

* Monowall pipe (natural); Skinned pipe (red, blue, white and orange); and Barrier pipe
  (red, blue, white and orange) are Certified for the following sizes: 3/8'', 1/2'',
  5/8'', 3/4'', 1'', 1-1/2'' & 2''.
  
  Tubing Certified against CSA B137.5 shall include the standard designation(s) of the
  fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
  marked, as applicable with the following fitting system designation(s): ASTM F1960, ASTM
  F1807, ASTM F2159, and ASTM F2098.
@ This tubing product has been evaluated against the performance requirements of
  ASTM	F876/877 and CSA B137.5.  This product is not NSF Certified for use in a potable
  water distribution system.  This product has been evaluated for use in radiant floor
  heating, (NSF-rfh), applications only.	
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.

Tubing* @ ¢ §
 
PEX 5106
 
JONES STEPHENS
 
CSA B137.5
3/8" - 2"

* Monowall pipe (natural); Skinned pipe (red, blue, white and orange); and Barrier pipe
  (red, blue, white and orange) are Certified for the following sizes: 3/8'', 1/2'',
  5/8'', 3/4'', 1'', 1-1/2'' & 2''.
  
  Tubing Certified against CSA B137.5 shall include the standard designation(s) of the
  fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
  marked, as applicable with the following fitting system designation(s): ASTM F1960, ASTM
  F1807, ASTM F2159, and ASTM F2098.
@ This tubing product has been evaluated against the performance requirements of
  ASTM	F876/877 and CSA B137.5.  This product is not NSF Certified for use in a potable
  water distribution system.  This product has been evaluated for use in radiant floor
  heating, (NSF-rfh), applications only.	
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.



 
K-Flex USA, LLC 
100 K-Flex Way
Youngsville, NC 27596 
United States 
919-435-5538
Visit this company's website

Facility : Nuevo Leon, Mexico

Potable Water - Pipe and Fittings

Product Type   Material Type   Trade Name   Product Standard

Tubing* ^ ¢ +++ [1] [2] [G]
 
PEX 5306
 
K-FLEX PE-Xb Pipe
 
ASTM F876/F877
1/4" - 2" SDR 9

* Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[1] Certified for red, white, and blue colors.
[2] Tubing certified against CSA B137.5 shall include the standard designation(s) of the
    fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
    marked, as applicable, with the following fitting system designation(s): ASTM F1807,
    ASTM F1960, ASTM F2098, and ASTM F2159.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Tubing* ^ ¢ +++ [1] [2] [G]
 
PEX 5306
 
K-FLEX PE-Xb Pipe
 
CSA B137.5
1/4" - 2" SDR 9

* Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[1] Certified for red, white, and blue colors.
[2] Tubing certified against CSA B137.5 shall include the standard designation(s) of the
    fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
    marked, as applicable, with the following fitting system designation(s): ASTM F1807,
    ASTM F1960, ASTM F2098, and ASTM F2159.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    


Radiant Floor Heating

Product Type   Material Type   Trade Name   Product Standard

Tubing* ^ ¢ +++ [1] [2]
 
PEX 5306
 
K-FLEX PE-Xb Pipe
 
ASTM F876/F877
1/4" - 2" SDR 9

* Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[1] Certified for red, white, and blue colors.
[2] Tubing certified against CSA B137.5 shall include the standard designation(s) of the
    fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
    marked, as applicable, with the following fitting system designation(s): ASTM F1807,
    ASTM F1960, ASTM F2098, and ASTM F2159.

Tubing* ^ ¢ +++ [1] [2]
 
PEX 5306
 
K-FLEX PE-Xb Pipe
 
CSA B137.5
1/4" - 2" SDR 9

* Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[1] Certified for red, white, and blue colors.
[2] Tubing certified against CSA B137.5 shall include the standard designation(s) of the
    fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
    marked, as applicable, with the following fitting system designation(s): ASTM F1807,
    ASTM F1960, ASTM F2098, and ASTM F2159.

[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    


 
Kafrit NA Ltd. 
5411 - 275th Street
Langley, BC V4W 3X8 
Canada 
604-607-6730
Visit this company's website

Facility : Langley, British Columbia, Canada

Potable Water - Materials

Material Type End Use Trade Name Product Standard
PEX 5306^ +++ [1] 1 TA 1108 HD/TA 2410 CL Red N/A
PEX 5306^ +++ [1] 1 TA 1108 HD/TA 2411 CL Blue N/A
PEX 5306^ +++ [1] 1 TA 1108 HD/TA 2412 CL White N/A
PEX 5306^ +++ [1] 1 TA 1108 HD/TA 2417 CL Black N/A
PEX 5306^ +++ [1] 1 TA 1108 HD/TA 2418 CL Red N/A
PEX 5306^ +++ [1] 1 TA 1108 HD/TA 2419 CL White N/A
PEX 5306^ +++ [1] 1 TA 1108 HD/TA 2420 CL Natural N/A
PEX 5306^ +++ [1] 1 TA 1108 HD/TA 2421 CL Light Blue N/A
PEX 5306^ +++ [1] 1 TA 1108 HD/TA 2422 CL Purple N/A

^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[1] Tubing manufactured using this material is cure process dependent.  Use of this material
    in NSF Certified tubing requires NSF's prior authorization.  Tubing produced from this
    material was tested to the performance requirements of ASTM F876 and CSA B137.5.  Tubing
    produced from this material is being evaluated for 1/4" and greater diameters.



 
Legend 
300 North Opdyke Road
Auburn Hills, MI 48326 
United States 
800-752-2082 
586-566-7400

Facility : D'Opaglio (NO), Italy

Radiant Floor Heating

Product Type   Material Type   Trade Name   Product Standard

Pipe
 
PEX
 
LegendFlex
 
ASTM F876/F877
3/8" - 1"

Pipe
 
PEX
 
LegendFlex
 
CSA B137.5
3/8" - 1"



 
Legend Valve 
300 North Opdyke Road
Auburn Hills, MI 48326 
United States 
248-630-7437

Facility : Ulricehamn, Sweden

Radiant Floor Heating

Product Type   Material Type   Trade Name   Product Standard

Tubing$ * @
 
PEX
 
LegendFlex w/Oxygen Barrier
 
ASTM F876/F877
3/8", 1/2", 5/8", 3/4", 1", 1 1/4", 1 1/2", 2" SDR 9

$ Tubing tested as a system using Georg Fischer S.r.l. brass compression fittings which
  comply with ASTM F877.
*  Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
@ This tubing product has been evaluated against the performance requirements of ASTM
  F876/877.  This product is not NSF Certified for use in a potable water distribution
  system.  This product has been evaluated for use in radiant floor heating, (NSF-rfh),
  applications only.		
  



 
Legend Valve 
300 North Opdyke Road
Auburn Hills, MI 48326 
United States 
248-630-7437
Visit this company's website

Facility : Barcelona, Spain

Potable Water - Pipe and Fittings

Product Type   Material Type   Trade Name   Product Standard

Pipe* @ ¢ § +++ [G]
 
PEX 5106
 
LegendFlex
 
ASTM F876/F877
3/8" - 2"

* Natural (Solid Wall) PEX Pipe Certified 3/8" - 2"sizes.  Red, blue, white or orange PEX
  pipe (2 layer pipe - natural with colored adhesive pipe) certified for 3/8" - 1" sizes.
  Tubing certified against CSA B137.5 shall include the standard designation(s) of the
  fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
  marked, as applicable, with the following fitting system designation(s): ASTM F1960,
  ASTM F1807, ASTM F2159, and ASTM F2098.
@ PEX 5106: Meets the chlorine resistance requirements of ASTM F876 when tested in
  accordance with ASTM F2023.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Pipe* @ ¢ § +++ [G]
 
PEX 5106
 
LegendFlex
 
CSA B137.5
3/8" - 2"

* Natural (Solid Wall) PEX Pipe Certified 3/8" - 2"sizes.  Red, blue, white or orange PEX
  pipe (2 layer pipe - natural with colored adhesive pipe) certified for 3/8" - 1" sizes.
  Tubing certified against CSA B137.5 shall include the standard designation(s) of the
  fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
  marked, as applicable, with the following fitting system designation(s): ASTM F1960,
  ASTM F1807, ASTM F2159, and ASTM F2098.
@ PEX 5106: Meets the chlorine resistance requirements of ASTM F876 when tested in
  accordance with ASTM F2023.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
      documentation shipped with the product are Certified.

Radiant Floor Heating

Product Type   Material Type   Trade Name   Product Standard

Pipe* @ ¢ §
 
PEX 5106
 
LegendFlex
 
ASTM F876/F877
3/8" - 2"

* Natural (Solid Wall) PEX Pipe Certified 3/8" - 2"sizes.  Red, blue, white or orange PEX
  pipe (2 layer pipe - natural with colored adhesive pipe) certified for 3/8" - 1" sizes.
  Tubing certified against CSA B137.5 shall include the standard designation(s) of the
  fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
  marked, as applicable, with the following fitting system designation(s): ASTM F1960,
  ASTM F1807, ASTM F2159, and ASTM F2098.
@ PEX 5106: Meets the chlorine resistance requirements of ASTM F876 when tested in
  accordance with ASTM F2023.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.

Pipe* @ ¢ §
 
PEX 5106
 
LegendFlex
 
CSA B137.5
3/8" - 2"

* Natural (Solid Wall) PEX Pipe Certified 3/8" - 2"sizes.  Red, blue, white or orange PEX
  pipe (2 layer pipe - natural with colored adhesive pipe) certified for 3/8" - 1" sizes.
  Tubing certified against CSA B137.5 shall include the standard designation(s) of the
  fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
  marked, as applicable, with the following fitting system designation(s): ASTM F1960,
  ASTM F1807, ASTM F2159, and ASTM F2098.
@ PEX 5106: Meets the chlorine resistance requirements of ASTM F876 when tested in
  accordance with ASTM F2023.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.

+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    
NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
      documentation shipped with the product are Certified.


 
Leggett Supply Inc. DBA Flair-It Sales & Mobile Mart 
1701 South Cherokee
Muskogee, OK 74403 
United States 
918-681-2211

Facility : # 1 USA

Potable Water - Pipe and Fittings

Product Type   Material Type   Trade Name   Product Standard

Pipe* ^ § +++ [G]
 
PEX 1306
 
SafePEX® Pro Blue UV-Shield
 
ASTM F876/F877
3/8" - 2" SDR 9

* Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Pipe* ^ ¢ § +++ [G]
 
PEX
 
SafePEX® Pro Blue UV-Shield
 
CSA B137.5
3/8" - 2" SDR 9

* Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Pipe* ^ § +++ [G]
 
PEX 1306
 
SafePEX® Pro Red UV-Shield
 
ASTM F876/F877
3/8" - 2" SDR 9

* Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Pipe* ^ ¢ § +++ [G]
 
PEX
 
SafePEX® Pro Red UV-Shield
 
CSA B137.5

* Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Pipe* ^ § +++ [G]
 
PEX 1306
 
SafePEX® Pro White UV-Shield
 
ASTM F876/F877

* Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Pipe* ^ ¢ § +++ [G]
 
PEX
 
SafePEX® Pro White UV-Shield
 
CSA B137.5
3/8" - 2" SDR 9

* Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

$ Non-barrier pipe.


 
Mercury Plastics LLC 
15760 Madison Road
P.O. Box 989 
Middlefield, OH 44062 
United States 
440-632-5281

Facility : Middlefield, OH

Potable Water - Appurtenances

Product Type   Material Type   Trade Name   Product Standard

Refrigerator Supply Line# ¢ § [1] [G]
 
PEX
 
GE SmartConnect™
 
ASME A112.18.6/CSA B125.6
1/4 in. OD Tube

# This product may be marked via a flag type label.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
[1] Certified up to 8 feet in length.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Refrigerator Supply Line# ¢ § [2] [G]
 
PEX
 
Merflex® PEX OT®
 
ASME A112.18.6/CSA B125.6
1/8" C.T.S.

# This product may be marked via a flag type label.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
[2] Certified up to 6 feet in length.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Tank Tube/Riser PW# ¢ § [3] [G]
 
PEX
 
Merflex® PEX OT®
 
ASME A112.18.6/CSA B125.6
1/4" I.D.

# This product may be marked via a flag type label.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
[3] Certified up to 20" in length.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Basin Tube/Riser PW# ¢ § [4] [G]
 
PEX
 
Merflex® PEX OT®
 
ASME A112.18.6/CSA B125.6
1/4" I.D.

# This product may be marked via a flag type label.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
[4] Certified up to 96" in length.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Dishwasher Supply Line# ¢ § [5] [G]
 
PEX
 
Merflex® PEX OT®
 
ASME A112.18.6/CSA B125.6
1/4" CTS X 3/8" OD

# This product may be marked via a flag type label.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
[5] Certified up to 72" in length.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Univ Dishwash Supply Line# ¢ § [5] [G]
 
PEX
 
Merflex® PEX OT®
 
ASME A112.18.6/CSA B125.6
1/4" CTS X 3/8" OD

# This product may be marked via a flag type label.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
[5] Certified up to 72" in length.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Basin Tube/Riser PW# § [4] [G]
 
PEX
 
DURAPEX
 
ASME A112.18.6/CSA B125.6
1/4" I.D.

# This product may be marked via a flag type label.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
[4] Certified up to 96" in length.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Basin Tube/Riser# ¢ [4] [6] [G]
 
PEX
 
Merflex® PEX OT®
 
ASME A112.18.6/CSA B125.6
1/4" CTS x 3/8" OD - P2-XX-A
1/4" CTS x 3/8" OD - P2-XX-B

# This product may be marked via a flag type label.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[4] Certified up to 96" in length.
[6] XX indicates length in inches.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Double Ended Hook-Up# ¢ [4] [6] [7] [G]
 
PEX
 
Merflex® PEX OT®
 
ASME A112.18.6/CSA B125.6
SEZ-XX-SB
SEZ-XX-ST

# This product may be marked via a flag type label.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[4] Certified up to 96" in length.
[6] XX indicates length in inches.
[7] B indicates basin/lav end.
    T indicates closet/tank end.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

MEZ Double Ended Hook-Up# ¢ [4] [6] [8] [G]
 
PEX
 
Merflex® PEX OT®
 
ASME A112.18.6/CSA B125.6
MEZ-XX-PTW
MEZ-XX-PW9W
MEZ-XX-PW9W9
MEZ-XX-PWW

# This product may be marked via a flag type label.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[4] Certified up to 96" in length.
[6] XX indicates length in inches.
[8] W9W denotes one 90-degree bend.
    W9W9 denotes two 90-degree bends.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Tank Tube/Riser# ¢ [3] [6] [G]
 
PEX
 
Merflex® PEX OT®
 
ASME A112.18.6/CSA B125.6
1/4" CTS x 3/8" OD - P2-XX-DL
1/4" CTS x 3/8" OD - P2-XX-T

# This product may be marked via a flag type label.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[3] Certified up to 20" in length.
[6] XX indicates length in inches.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Refrigerator Supply Line# ¢ § [2] [G]
 
PEX
 
Zurn®PEX
 
ASME A112.18.6/CSA B125.6
1/8" C.T.S.

# This product may be marked via a flag type label.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
[2] Certified up to 6 feet in length.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Tank Tube/Riser PW# ¢ § [3] [G]
 
PEX
 
Zurn®PEX
 
ASME A112.18.6/CSA B125.6
1/4" I.D.

# This product may be marked via a flag type label.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
[3] Certified up to 20" in length.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Basin Tube/Riser PW# ¢ § [4] [G]
 
PEX
 
Zurn®PEX
 
ASME A112.18.6/CSA B125.6
1/4" I.D.

# This product may be marked via a flag type label.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
[4] Certified up to 96" in length.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Dishwasher Supply Line# ¢ § [5] [G]
 
PEX
 
Zurn®PEX
 
ASME A112.18.6/CSA B125.6
1/4" CTS x 3/8" OD

# This product may be marked via a flag type label.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
[5] Certified up to 72" in length.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Basin Tube/Riser# ¢ [4] [6] [G]
 
PEX
 
Zurn®PEX
 
ASME A112.18.6/CSA B125.6
1/4" CTS x 3/8" OD - P2-XX-A
1/4" CTS x 3/8" OD - P2-XX-B

# This product may be marked via a flag type label.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[4] Certified up to 96" in length.
[6] XX indicates length in inches.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Double Ended Hook-Up# ¢ [6] [7] [G]
 
PEX
 
Zurn®PEX
 
ASME A112.18.6/CSA B125.6
SEZ-XX-SB[4]

SEZ-XX-ST[3]

[4] Certified up to 96" in length.
[3] Certified up to 20" in length.
# This product may be marked via a flag type label.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[6] XX indicates length in inches.
[7] B indicates basin/lav end.
    T indicates closet/tank end.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

MEZ Double Ended Hook-Up# ¢ [4] [6] [8] [G]
 
PEX
 
Zurn®PEX
 
ASME A112.18.6/CSA B125.6
MEZ-XX-PTW
MEZ-XX-PW9W
MEZ-XX-PW9W9
MEZ-XX-PWW

# This product may be marked via a flag type label.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[4] Certified up to 96" in length.
[6] XX indicates length in inches.
[8] W9W denotes one 90-degree bend.
    W9W9 denotes two 90-degree bends.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Tank Tube/Riser# ¢ [3] [6] [G]
 
PEX
 
Zurn®PEX
 
ASME A112.18.6/CSA B125.6
1/4" CTS x 3/8" OD - P2-XX-DL
1/4" CTS x 3/8" OD - P2-XX-T

# This product may be marked via a flag type label.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[3] Certified up to 20" in length.
[6] XX indicates length in inches.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Supply Tube Assembly PW§ [4] [G]
 
PEX
 
AJ Hookup
 
ASME A112.18.6/CSA B125.6
1/4" I.D.

§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
[4] Certified up to 96" in length.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Supply Tube Assembly PW§ [4] [G]
 
PEX
 
DLJ Hookup
 
ASME A112.18.6/CSA B125.6
1/4" I.D.

§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
[4] Certified up to 96" in length.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Supply Tube Assembly PW§ [G]
 
PEX
 
MEZ Hookup
 
ASME A112.18.6/CSA B125.6
1/4"[4]

3/8"[9]

[4] Certified up to 96" in length.
[9] Certified up to 60" in length.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Supply Tube Assembly PW§ [4] [G]
 
PEX
 
SEZ Hookup
 
ASME A112.18.6/CSA B125.6
1/4" I.D.

§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
[4] Certified up to 96" in length.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    


Potable Water - Pipe and Fittings

Product Type   Material Type   Trade Name   Product Standard

Tubing# @ ^ § +++ [G]
 
PEX 5106
 
Zurn®PEX
 
ASTM F876/F877
1/8" - 1 1/4" SDR 9

# Authorized for gray and white.
@ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Tubing# & @ +++ [G]
 
PEX 5106
 
Zurn®PEX
 
CSA B137.5
1/8" - 1 1/4" SDR 9

# Authorized for gray and white.
& Tubing certified against CSA B137.5 shall include the standard designation(s) of the
  fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
  marked, if applicable, with the following fitting system designations:  ASTM F1807, ASTM
  F2159, ASTM F2098, ASTM F2080, ASSE 1061 and ASTM F1960.
@ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Tubing# @ ^ § +++ [G]
 
PEX 5106
 
Merflex® PEX OT®
 
ASTM F876/F877
1/8" - 1 1/4" SDR 9

# Authorized for gray and white.
@ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Tubing@ ^ § +++ [G]
 
PEX 5106
 
Merflex® PEX OT®
 
ASTM F876/F877
1/8" CTS x 1/4" OD SDR 9

@ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Tubing# & @ ¢ +++ [G]
 
PEX 5106
 
Merflex® PEX OT®
 
CSA B137.5
1/8" - 1 1/4" SDR 9

# Authorized for gray and white.
& Tubing certified against CSA B137.5 shall include the standard designation(s) of the
  fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
  marked, if applicable, with the following fitting system designations:  ASTM F1807, ASTM
  F2159, ASTM F2098, ASTM F2080, ASSE 1061 and ASTM F1960.
@ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Tubing& @ ¢ +++ [G]
 
PEX 5106
 
Merflex® PEX OT®
 
CSA B137.5
1/8" CTS x 1/4" OD SDR 9

& Tubing certified against CSA B137.5 shall include the standard designation(s) of the
  fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
  marked, if applicable, with the following fitting system designations:  ASTM F1807, ASTM
  F2159, ASTM F2098, ASTM F2080, ASSE 1061 and ASTM F1960.
@ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    


Radiant Floor Heating

Product Type   Material Type   Trade Name   Product Standard

Tubing# * @ ^ ¢ §
 
PEX 5006
 
Embassy/LiquiPEX w/O2 Barrier
 
ASTM F876/F877
3/8" - 1" SDR 9

# Authorized for blue, gray, natural, orange, red, and white.
* Product is barrier tubing.
@ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.

Tubing# & * @ ¢
 
PEX 5006
 
Embassy/LiquiPEX w/O2 Barrier
 
CSA B137.5
3/8" - 1" SDR 9