NSF Product and Service Listings
These NSF Official Listings are current as of Tuesday, August 19, 2025 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.
Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/PwsComponents/Listings.asp?Company=0N280&Standard=061&
NSF/ANSI/CAN 61
Drinking Water System Components - Health Effects
Drinking Water System Components - Health Effects
NOTE: Unless otherwise indicated for Materials, Certification is only for the Water Contact Material shown in the Listing. Click here for a list of Abbreviations used in these Listings. Click here for the definitions of Water Contact Temperatures denoted in these Listings. Products certified to NSF/ANSI/CAN 61 comply with the health effects criteria in NSF/ANSI/CAN 600.
| FilmTec Corporation | |
| 5400 Dewey Hill Road | |
| Edina, MN 55439 | |
| United States | |
| 800-345-6832 | |
| 952-897-4200 | |
| Visit this company's website |
Facility : # 1 Korea
Mechanical Devices
| Water | Water | |||
| Contact | Contact | |||
| Trade Designation | Size | Temp | Material | |
|
Reverse Osmosis Element[1] [G] |
||||
| BW30 PRO-2540 | 2 1/2" X 40" | CLD 23 | MLTPL | |
| BW30 PRO-4040 | 4" x 40" | CLD 23 | MLTPL | |
| LC LE PRO-4040 | 4" X 40" | CLD 23 | MLTPL | |
| NF270-4040 W | 4" x 40" | CLD 23 | MLTPL | |
| NF90-4040 W | 4" x 40" | CLD 23 | MLTPL | |
| SW30-2540 W (12082989) | 2 1/2" x 40" | CLD 23 | MLTPL | |
| SW30-4040 W (12082966) | 4" x 40" | CLD 23 | MLTPL | |
| TW30 PRO-2540 | 2 1/2" X 40" | CLD 23 | MLTPL | |
| TW30 PRO-4040 | 4" x 40" | CLD 23 | MLTPL | |
| XLE PRO-2540 | 2 1/2" X 40" | CLD 23 | MLTPL | |
| XLE PRO-4040 | 4" x 40" | CLD 23 | MLTPL | |
[1] Certified for the following minimum daily flow rates:
BW30 PRO-4040 and TW30 PRO-4040 are certified for a minimum flow of 2,210 gallons per
day.
XLE PRO-4040 are certified for a minimum flow of 2,210 gallons per day.
BW30 PRO-4040 and TW30 PRO-4040 require a 0.5 hour pre-service flush at a flow rate of
1.8 gallons per minute (gpm) with de-ionized water.
XLE PRO-4040 requires a 0.5 hour pre-service flush at a flow rate of 1.9 gallons per
minute (gpm) with de-ionized water.
SW30-4040 W (12082966) is certified for a minimum daily flow of 12,500 L. SW30-2540 W
(12082989) is certified for a minimum daily flow of 5,000 L
NF90-4040 W and NF270-4040 W are certified for a minimum daily flow of 2,059 L.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
state laws and the U.S. Safe Drinking Water Act.
|
||||
Facility : # 1 Thailand
Mechanical Devices
| Water | Water | |||
| Contact | Contact | |||
| Trade Designation | Size | Temp | Material | |
|
Reverse Osmosis Element[1] [G] |
||||
| BW30 PRO-2540 | 2 1/2" x 40" | CLD 23 | MLTPL | |
| BW30 PRO-4040 | 4" x 40" | CLD 23 | MLTPL | |
| LC LE PRO-4040 | 4" x 40" | CLD 23 | MLTPL | |
| TW30 PRO-2540 | 2 1/2" x 40" | CLD 23 | MLTPL | |
| TW30 PRO-4040 | 4" x 40" | CLD 23 | MLTPL | |
| XLE PRO-2540 | 2 1/2" x 40" | CLD 23 | MLTPL | |
| XLE PRO-4040 | 4" x 40" | CLD 23 | MLTPL | |
[1] Certified for the following minimum daily flow rates:
2540 elements (2.5" x 40") are certified for a minimum flow of 800 gallons per day.
4040 elements (4" x 40") are certified for a minimum flow of 2,210 gallons per day.
2.5" x 40" models require a 0.5 hour pre-service flush at a flow rate of 0.7 gallons per
minute (gpm) with de-ionized water.
BW30 PRO-4040, TW30 PRO-4040 and LC LE PRO-4040 require a 0.5 hour pre-service flush at
a flow rate of 1.8 gallons per minute (gpm) with deionized
water.
XLE PRO-4040 requires a 0.5 hour pre-service flush at a flow rate of 1.9 gallons per
minute (gpm) with de-ionized water.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
state laws and the U.S. Safe Drinking Water Act.
|
||||
Facility : # 2 Saudi Arabia
Mechanical Devices
| Water | Water | |||
| Contact | Contact | |||
| Trade Designation | Size | Temp | Material | |
|
Reverse Osmosis Element [G] |
||||
| 12030564 BW 8040 SP[1] | [2] | CLD 23 | MLTPL | |
| 12030646 SW 8040 SP[1] | [2] | CLD 23 | MLTPL | |
| BW30 PRO-365 D (12075864)[2] | 8" x 40" | CLD 23 | MLTPL | |
| BW30 PRO-365 W (12075881)[2] | 8" x 40" | CLD 23 | MLTPL | |
| BW30 PRO-400 A (12075562)[1] [3] | [2] | CLD 23 | MLTPL | |
| BW30 PRO-400 D (12075563)[2] | 8" x 40" | CLD 23 | MLTPL | |
| BW30 PRO-400-34 A (12075564)[2] | 8" x 40" | CLD 23 | MLTPL | |
| BW30 PRO-400-34 D (12075565)[2] | 8" x 40" | CLD 23 | MLTPL | |
| BW30HR-440 A (11025076)[2] | 8" x 40" | CLD 23 | MLTPL | |
| BW30HR-440 D (11025074)[2] | 8" x 40" | CLD 23 | MLTPL | |
| BW30HRLE-440 A 99044291[4] | 8" x 40" | CLD 23 | MLTPL | |
| BW30HRLE-440 D 99044262[4] | 8" x 40" | CLD 23 | MLTPL | |
| BW30XHR PRO-400-34 A (12075640)[1] | [2] | CLD 23 | MLTPL | |
| BW30XHR PRO-400-34 D (12075704)[1] | [2] | CLD 23 | MLTPL | |
| BW30XHR PRO-440 A (12029161)[4] | 8" x 40" | CLD 23 | MLTPL | |
| BW30XHR PRO-440 D (12029154)[4] | 8" x 40" | CLD 23 | MLTPL | |
| FILMTEC™ SOAR 7000i A (12030969)[7] | 8 x 40 | CLD 23 | MLTPL | |
| FILMTEC™ SOAR 7000i D (12030968)[7] | 8 x 40 | CLD 23 | MLTPL | |
| FORTILIFE™ CR50 A (12120143)[4] | 8 x 40 | CLD 23 | MLTPL | |
| FORTILIFE™ CR50 D (12083508)[4] | 8" x 40" | CLD 23 | MLTPL | |
| FORTILIFE™ CR50 D (12120243)[4] | 8 x 40 | CLD 23 | MLTPL | |
| FORTILIFE™ XC70 (A) (12010199)[6] | 8 x 40 | CLD 23 | MLTPL | |
| FORTILIFE™ XC70 D (12087369)[6] | 8 x 40 | CLD 23 | MLTPL | |
| Fortilife™ CR50 W (12083507)[4] | 8" x 40" | CLD 23 | MLTPL | |
| SW-370-34i (A) (11011525) [5] | 8 x 40 | CLD 23 | MLTPL | |
| SW30HR-380 A (279246)[5] | 8 x 40 | CLD 23 | MLTPL | |
| SW30HR-380 D (12022650)[5] | 8 x 40 | CLD 23 | MLTPL | |
| SW30HR-380 W (135137)[5] | 8 x 40 | CLD 23 | MLTPL | |
| SW30HRLE-400 A (279243)[5] | 8 x 40 | CLD 23 | MLTPL | |
| SW30HRLE-400 W (217822)[5] | 8 x 40 | CLD 23 | MLTPL | |
| SW30HRLE-400-D (12020493)[5] | 8 x 40 | CLD 23 | MLTPL | |
| SW30HRLE-440 A (365221)[5] | 8 x 40 | CLD 23 | MLTPL | |
| SW30HRLE-440 W (337650)[5] | 8 x 40 | CLD 23 | MLTPL | |
| SW30HRLE-440-D (12020604)[5] | 8 x 40 | CLD 23 | MLTPL | |
| SW30HRLE-440i W (335157)[5] | 8 x 40 | CLD 23 | MLTPL | |
| SW30HRLE-440i-D (12020620)[5] | 8 x 40 | CLD 23 | MLTPL | |
| SW30XFR-400-34 D (12022636)[5] | 8 x 40 | CLD 23 | MLTPL | |
| SW30XFR-400-34 W (99104360)[5] | 8 x 40 | CLD 23 | MLTPL | |
| SW30XFR-400-34i D (12022637)[5] | 8 x 40 | CLD 23 | MLTPL | |
| SW30XFR-400-34i W (12020475)[5] | 8 x 40 | CLD 23 | MLTPL | |
| SW30XLE 400 A (12017559)[7] | 8 x 40 | CLD 23 | MLTPL | |
| SW30XLE 400 D (12020601)[7] | 8 x 40 | CLD 23 | MLTPL | |
| SW30XLE 400-34 (12113160) W[7] | 8" x 40" | CLD 23 | MLTPL | |
| SW30XLE 400-34 (12113161) D[7] | 8" x 40" | CLD 23 | MLTPL | |
| SW30XLE-440 A (364711)[7] | 8 x 40 | CLD 23 | MLTPL | |
| SW30XLE-440-D (12020600)[7] | 8 x 40 | CLD 23 | MLTPL | |
| SW30XLE-440i A (364710)[7] | 8 x 40 | CLD 23 | MLTPL | |
| SW30XLE-440i-D (12020589)[7] | 8 x 40 | CLD 23 | MLTPL | |
[1] Elements sold under 12030646 SW 8040 SP or 12030564 BW 8040 SP are marked as "surplus"
before shipping to customers.
[2] Certified for a minimum flow of 35,960 liters per day. Product requires a pre-rinse of
0.5 hour (30 minutes)
at 100 psi.
[3] Product requires a pre-rinse of 0.5 hour (30 minutes) at 100 psi.
[4] FORTILIFE™ CR50 W (12083507), FORTILIFE™ CR50 D (12083508), FORTILIFE™ CR50 D (12120243)
and FORTILIFE™ CR50 A (12120143) are certified for a minimum daily flow of 10,780
liters.
BW30HRLE-440 A (99044291), BW30HRLE-440 D (99044262), BW30XHR PRO-440 A (12029161) and
BW30XHR PRO-440 D (12029154) are certified for a minimum daily flow of 40,698 liters.
All other elements are certified for a minimum daily flow of 35,960 liters.
[5] The 8” x 40” elements (SW30HRLE-440i) are certified for a minimum daily flow of 5,678 L.
The 8” x 40” elements (SW30XFR-400-34 W (99104360), SW30XFR-400-34i D (12022637) and
SW30XFR-400-34i W (12020475) are certified for a minimum daily flow of 18,168 L.
The 8” x 40” elements (SW-370-34i, SW30HR-380, SW30XFR-400-34 D (12022636), SW30HR-380 D
(12022650), SW30HRLE-400 and SW30HRLE-440) are certified for a minimum daily flow of
21,558 L.
[6] 28,958 liters/day:
FORTILIFE™ XC70 (A) (12010199)
FORTILIFE™ XC70 D (12087369)
[7] SW30XLE 400-34 (12113160) W and SW30XLE 400-34 (12113161) D are certified for a minimum
permeate flow rate of 7,650 gallons/day.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
state laws and the U.S. Safe Drinking Water Act.
|
||||
Facility : # 4 China
Mechanical Devices
| Water | Water | |||
| Contact | Contact | |||
| Trade Designation | Size | Temp | Material | |
|
Reverse Osmosis Element: Point of Entry[1] [2] [G] |
||||
| TapTec™ LC HF 4040 | 3.9" x 40" | CLD 23 | MLTPL | |
[1] Flushing Procedure: The TapTec™ LC HF 4040 is flushed for 8 hrs at 100 PSI with
de-ionized water.
[2] Certified for POE end use.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
state laws and the U.S. Safe Drinking Water Act.
|
||||
Facility : Building 5400, Edina, MN
Mechanical Devices
| Water | Water | |||
| Contact | Contact | |||
| Trade Designation | Size | Temp | Material | |
|
Filtration Devices/Components [G] |
||||
| 12016088 NF245 CR | [1] | CLD 23 | OTHER | |
| 12016224 NF CR | [2] | CLD 23 | OTHER | |
| 12016225 NF270 CR | [3] | CLD 23 | OTHER | |
| 12072945 SW30XLE 31.0 | [4] | CLD 23 | OTHER | |
| 216814 NF | [2] | CLD 23 | OTHER | |
| 216816 NF90 | [5] | CLD 23 | OTHER | |
| 216817 NF270 | [3] | CLD 23 | OTHER | |
| 301451 NF245 | [1] | CLD 23 | OTHER | |
| 341791 SW30ULE | [6] | CLD 23 | OTHER | |
| 341792 SW30XLE | [7] | CLD 23 | OTHER | |
| 99048682 BW30HRLE 28.5 | [8] | CLD 23 | OTHER | |
[1] Certified for a maximum surface area of 390 sq. ft.
Certified for a minimum daily flow of 1,530 gallons. Product requires a pre-rinse of 0.5
hour (30 minutes) at 100 psi.
[2] Certified for a maximum surface area of 400 sq. ft.
Certified for a minimum daily flow of 1,530 gallons. Product requires a pre-rinse of 0.5
hour (30 minutes) at 100 psi.
[3] Certified for a maximum surface area of 400 sq. ft.
Certified for a minimum daily flow of 2,059 liters. Product requires a pre-rinse of 0.5
hour (30 minutes) at 100 psi.
[4] Certified for a maximum surface area of 480 sq. ft. Certified for a minimum permeate
flow rate of 1,500 gallons/day. Product requires a 1 hour flush at 400 psi.
[5] Certified for a maximum surface area of 400 sq. ft.
Certified for a minimum daily flow of 2,059 liters. Product requires a pre-rinse of 0.5
hour (30 minutes) at 100 psi.
[6] Certified for a maximum surface area of 440 sq. ft.
Certified for a minimum daily flow of 7,140 gallons. Product requires a 1 hour flush at
400 psi.
[7] SW30XLE-400 and SW30XLE-440 are certified for a minimum permeate flow rate of 8,200
gallons/day.
SW30XLE 400-34 (12113160) W and SW30XLE 400-34 (12113161) D are certified for a minimum
permeate flow rate of 7,650 gallons/day.
SW30XLE-440i and FilmTec™ SOAR 7000i are certified for a minimum permeate flow rate of
1,500 gallons/day.
Product requires a per-service flush for 1 hour at 400 psi.
[8] Certified for a maximum surface area of 440 sq. ft.
Certified for a minimum daily flow of 3,785 liters. Product requires a pre-rinse of 0.5
hour (30 minutes) at 100 psi.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
state laws and the U.S. Safe Drinking Water Act.
|
||||
|
Reverse Osmosis Element [G] |
||||
| 12030564 BW 8040 SP[9] | 8" x 40" | CLD 23 | MLTPL | |
| 12030646 SW 8040 SP[9] | 8" x 40" | CLD 23 | MLTPL | |
| 423G FF 367636 (W)[10] | 4" x 40" | CLD 23 | MLTPL | |
| 423G FF 367716 (D)[10] | 4" x 40" | CLD 23 | MLTPL | |
| BW30 PRO 400-34 A 12075564[12] | 8" x 40" | CLD 23 | MLTPL | |
| BW30 PRO 400-34 D 12075565[12] | 8" x 40" | CLD 23 | MLTPL | |
| BW30 PRO 400-34i A 12075703[12] | 8" x 40" | CLD 23 | MLTPL | |
| BW30 PRO 400-34i D 12075587[12] | 8" x 40" | CLD 23 | MLTPL | |
| BW30 PRO-365 D (12075864)[11] | 8" x 40" | CLD 23 | MLTPL | |
| BW30 PRO-365 W (12075881)[11] | 8" x 40" | CLD 23 | MLTPL | |
| BW30 PRO-400 A 12075562[12] | 8" x 40" | CLD 23 | MLTPL | |
| BW30 PRO-400 D 12075563[12] | 8" x 40" | CLD 23 | MLTPL | |
| BW30-4040 D (80783) | [12] | CLD 23 | MLTPL | |
| BW30-4040 W (80782) | [12] | CLD 23 | MLTPL | |
| BW30HR-440 A (11025076)[13] | [14] | CLD 23 | MLTPL | |
| BW30HR-440 D (11025074)[13] | [14] | CLD 23 | MLTPL | |
| BW30HR-440i A (317487)[13] | [14] | CLD 23 | MLTPL | |
| BW30HR-440i D (317529)[13] | [14] | CLD 23 | MLTPL | |
| BW30HRLE-440 A (99044291)[15] | [16] | CLD 23 | MLTPL | |
| BW30HRLE-440 D (99044262)[15] | [16] | CLD 23 | MLTPL | |
| BW30HRLE-440i A (99044231)[15] | [16] | CLD 23 | MLTPL | |
| BW30HRLE-440i D (99044309)[15] | [16] | CLD 23 | MLTPL | |
| BW30XFR-400-34 (D) 11022769[13] | [14] | CLD 23 | MLTPL | |
| BW30XFR-400-34 A (11025073)[13] | [14] | CLD 23 | MLTPL | |
| BW30XFR-400-34i A (297346)[13] | [14] | CLD 23 | MLTPL | |
| BW30XFR-400-34i D (315924)[13] | [14] | CLD 23 | MLTPL | |
| BW30XFRLE-400-34 A (99044371)[15] | [16] | CLD 23 | MLTPL | |
| BW30XFRLE-400-34 D (99044497) | CLD 23 | MLTPL | ||
| BW30XFRLE-400-34i A (99044306)[15] | [16] | CLD 23 | MLTPL | |
| BW30XFRLE-400-34i D (99044372)[15] | [16] | CLD 23 | MLTPL | |
| BW30XHR 440i A (12080554) | [13] | CLD 23 | MLTPL | |
| BW30XHR 440i D (12080604) | [13] | CLD 23 | MLTPL | |
| BW30XHR PRO 440 A (12029161)[13] | [14] | CLD 23 | MLTPL | |
| BW30XHR PRO 440 D (12029154)[13] | [14] | CLD 23 | MLTPL | |
| BW30XHR PRO-400-34 A 12075640 | [17] | CLD 23 | MLTPL | |
| BW30XHR PRO-400-34 D 12075704 | [17] | CLD 23 | MLTPL | |
| BW30XHR PRO-400-34i A 12075762 | [17] | CLD 23 | MLTPL | |
| BW30XHR PRO-400-34i D 12075583 | [17] | CLD 23 | MLTPL | |
| ECO PRO 400 A (99040808)[15] | [16] | CLD 23 | MLTPL | |
| ECO PRO 400 D (99040807)[15] | [16] | CLD 23 | MLTPL | |
| ECO PRO 400i A (99046698)[15] | [16] | CLD 23 | MLTPL | |
| ECO PRO 400i D (99046699)[15] | [16] | CLD 23 | MLTPL | |
| ECO PRO 440 A (99041027)[15] | [16] | CLD 23 | MLTPL | |
| ECO PRO 440 D (99040991)[15] | [16] | CLD 23 | MLTPL | |
| ECO PRO 440i A (99041026)[15] | [16] | CLD 23 | MLTPL | |
| ECO PRO 440i D (99041000)[15] | [16] | CLD 23 | MLTPL | |
| ECO Platinum 440i A (99046537)[15] | [16] | CLD 23 | MLTPL | |
| ECO Platinum 440i D (99046696)[15] | [16] | CLD 23 | MLTPL | |
| EXLEB 440-28 A (12089858)[19] [25] | 6" x 40" | CLD 23 | MLTPL | |
| EXLEB 440-28 D (12094516)[19] [25] | 8" x 40" | CLD 23 | MLTPL | |
| FILMTEC HYPERSHELL™ HSRO-390 A 346586[20] | 8" x 40" | CLD 23 | MLTPL | |
| FILMTEC HYPERSHELL™ HSRO-390 M W 12071896[13] | 8" x 40" | CLD 23 | MLTPL | |
| FILMTEC HYPERSHELL™ NF-8038 A (365935)[20] | 8" x 40" | CLD 23 | MLTPL | |
| FILMTEC HYPERSHELL™ RO-390 A (346364)[10] | 8" x 40" | CLD 23 | MLTPL | |
| FILMTEC HYPERSHELL™ RO-8038 A 302218[10] | 8" x 40" | CLD 23 | MLTPL | |
| FILMTEC HYPERSHELL™ RO-8038 D 12088977[10] | 8" x 40" | CLD 23 | MLTPL | |
| FILMTEC HYPERSHELL™ RO-8038 M W (12071895)[10] | 8" x 40" | CLD 23 | MLTPL | |
| FILMTEC HYPERSHELL™ RO-8038-48 A (360400)[10] | 8" x 40" | CLD 23 | MLTPL | |
| FILMTEC HYPERSHELL™ RO-8038-48 M W (12071858)[10] | 8" x 40" | CLD 23 | MLTPL | |
| FILMTEC™ HYPERSHELL™ NF245- 8038 A (336673)[21] | 8" x 40" | CLD 23 | MLTPL | |
| FILMTEC™ HYPERSHELL™ NF245XD 8038-30 12100388 (A)[21] | 8" x 40" | CLD 23 | MLTPL | |
| FILMTEC™ NF245-3838-FF 316942 (W)[21] | 4" x 40" | CLD 23 | MLTPL | |
| FILMTEC™ NF245-3840-FF 319116 (W)[21] | 4" x 40" | CLD 23 | MLTPL | |
| FILMTEC™ NF245XD 3838-30 FF A (12100410)[21] | 4" x 40" | CLD 23 | MLTPL | |
| FILMTEC™ NF245XD 3840-30 FF A (12100389)[21] | 4" x 40" | CLD 23 | MLTPL | |
| FORTILIFE™ CR100 A (12112290)[13] | [14] | CLD 23 | MLTPL | |
| FORTILIFE™ CR100 A (99029709)[13] | [14] | CLD 23 | MLTPL | |
| FORTILIFE™ CR100 D (12112287)[13] | [14] | CLD 23 | MLTPL | |
| FORTILIFE™ CR100 D (99029748)[13] | [14] | CLD 23 | MLTPL | |
| FORTILIFE™ CR100-4040 PILOT W (99083585)[13] | [14] | CLD 23 | MLTPL | |
| FORTILIFE™ CR100i A (12112311) [13] | [14] | CLD 23 | MLTPL | |
| FORTILIFE™ CR100i A (99029708)[13] | [14] | CLD 23 | MLTPL | |
| FORTILIFE™ CR100i D (12112312) [13] | [14] | CLD 23 | MLTPL | |
| FORTILIFE™ CR100i D (99029827)[13] | [14] | CLD 23 | MLTPL | |
| FORTILIFE™ CR200 A (12026677)[13] | 8" x 40" | CLD 23 | MLTPL | |
| FORTILIFE™ CR200 D (12026676)[13] | 8" x 40" | CLD 23 | MLTPL | |
| FORTILIFE™ CR50 D (12083508)[13] | 8" x 40" | CLD 23 | MLTPL | |
| FORTILIFE™ XC-N (A) (99052663)[13] | [14] | CLD 23 | MLTPL | |
| FORTILIFE™ XC-N D 12081784 | [13] | CLD 23 | MLTPL | |
| FORTILIFE™ XC-N HP A (12015379)[13] | [14] | CLD 23 | MLTPL | |
| FORTILIFE™ XC70 (A) (12010199)[13] | [14] | CLD 23 | MLTPL | |
| FORTILIFE™ XC70 D (12087369)[13] | 8" x 40" | CLD 23 | MLTPL | |
| FilmTec™ SOAR 3000i A (12031044) | [22] | CLD 23 | MLTPL | |
| FilmTec™ SOAR 3000i D (12031050) | [22] | CLD 23 | MLTPL | |
| FilmTec™ SOAR 4000i A (12031009)[15] | [16] | CLD 23 | MLTPL | |
| FilmTec™ SOAR 4000i D (12031051) | 8" x 40" | CLD 23 | MLTPL | |
| FilmTec™ SOAR 5000 A (12119675)[13] | 8" x 40" | CLD 23 | MLTPL | |
| FilmTec™ SOAR 5000 D (12119804)[13] | 8" x 40" | CLD 23 | MLTPL | |
| FilmTec™ SOAR 5000i A (12031015)[13] | [14] | CLD 23 | MLTPL | |
| FilmTec™ SOAR 5000i A (12119678)[13] | 8" x 40" | CLD 23 | MLTPL | |
| FilmTec™ SOAR 5000i D (12031014)[13] | [14] | CLD 23 | MLTPL | |
| FilmTec™ SOAR 5000i D (12119673)[13] | 8" x 40" | CLD 23 | MLTPL | |
| FilmTec™ SOAR 6000i A (12030899)[15] | [16] | CLD 23 | MLTPL | |
| FilmTec™ SOAR 6000i D (12030971)[15] | [16] | CLD 23 | MLTPL | |
| FilmTec™ SOAR 7000i A (12030969)[23] | [24] | CLD 23 | MLTPL | |
| FilmTec™ SOAR 7000i D (12030968)[23] | [24] | CLD 23 | MLTPL | |
| Fortilife™ CR50 W (12083507)[13] | 8" x 40" | CLD 23 | MLTPL | |
| Fortilife™ NF1000 A(12089511) | [13] | CLD 23 | MLTPL | |
| Fortilife™ NF1000 D(12089533) | [13] | CLD 23 | MLTPL | |
| Fortilife™ NF1000 HP A(12089513) | [13] | CLD 23 | MLTPL | |
| HANS 6040 D (12021035)[25] | 6" x 40 " | CLD 23 | MLTPL | |
| HANS 6040 W (12021057)[25] | 6" x 40 " | CLD 23 | MLTPL | |
| HSRO 4040 FF A 99033319[20] | 4" x 40" | CLD 23 | MLTPL | |
| HSRO-390 FF 170701 (D)[20] | 8" x 40" | CLD 23 | MLTPL | |
| HSRO-390 FF 92564 (W)[20] | 8" x 40" | CLD 23 | MLTPL | |
| HSRO-4040 FF 98592 (W)[20] | 4" x 40" | CLD 23 | MLTPL | |
| LC HR-4040 D (343771)[13] | [14] | CLD 23 | MLTPL | |
| LC HR-4040 W (343770)[13] | [14] | CLD 23 | MLTPL | |
| LCLE 4040 D (356603)[13] | [14] | CLD 23 | MLTPL | |
| LCLE 4040 W (356602)[13] | [14] | CLD 23 | MLTPL | |
| NF-3838-30-FF 146071 (A)[26] | 4" x 40" | CLD 23 | MLTPL | |
| NF-3840-30-FF 146073 (A)[26] | 4" x40" | CLD 23 | MLTPL | |
| NF-400 151544 (W)[26] | 8" x 40" | CLD 23 | MLTPL | |
| NF270-2540 W (149986) | [27] | CLD 23 | MLTPL | |
| NF270-400-34 A (12073738) | [27] | CLD 23 | MLTPL | |
| NF270-400-34 D (12073764) | [27] | CLD 23 | MLTPL | |
| NF270-400-34i A (11023068) | [27] | CLD 23 | MLTPL | |
| NF270-400-34i D (11023070) | [27] | CLD 23 | MLTPL | |
| NF270-4040 W (149987) | [27] | CLD 23 | MLTPL | |
| NF270-440 A (12027210) | [27] | CLD 23 | MLTPL | |
| NF270-440 D (12027108) | [27] | CLD 23 | MLTPL | |
| NF270B-400-34 A (12082717) | [28] | CLD 23 | MLTPL | |
| NF270B-400-34 D (12082811) | [28] | CLD 23 | MLTPL | |
| NF270B-440 A (12082813) | [28] | CLD 23 | MLTPL | |
| NF270B-440 D (12082814) | [28] | CLD 23 | MLTPL | |
| NF90-2540 W (149982) | [22] | CLD 23 | MLTPL | |
| NF90-400-34 D (12073762) | [22] | CLD 23 | MLTPL | |
| NF90-400-34 W (12073763) | [22] | CLD 23 | MLTPL | |
| NF90-400-34i A (11023067) | [22] | CLD 23 | MLTPL | |
| NF90-400-34i D (11023066) | [22] | CLD 23 | MLTPL | |
| NF90-4040 W (149983) | [22] | CLD 23 | MLTPL | |
| NF90B-400 W (12082237) | [22] | CLD 23 | MLTPL | |
| NF90B-400-34 A (12082246) | [22] | CLD 23 | MLTPL | |
| NF90B-400-34 D (12082260) | [22] | CLD 23 | MLTPL | |
| RO-3838-30 FF A 80589[10] | 3.8" x 38" | CLD 23 | MLTPL | |
| RO-3840-30 FF 108664 (W)[10] | 4" x 40" | CLD 23 | MLTPL | |
| RO-390 FF 100608 (W)[10] | 8" x 40" | CLD 23 | MLTPL | |
| RO-390 FF 116314 (D)[10] | 8" x 40" | CLD 23 | MLTPL | |
| RO-4040 FF A 84286[10] | 4" x 40" | CLD 23 | MLTPL | |
| RO-4040 FF A 99033320[10] | 4" x 40" | CLD 23 | MLTPL | |
| SEAMAXX-440 A (12017690)[15] | [16] | CLD 23 | MLTPL | |
| SEAMAXX-440 D (12020606)[15] | [16] | CLD 23 | MLTPL | |
| SEAMAXX-440i D (12020605)[15] | [16] | CLD 23 | MLTPL | |
| SEAMAXX-440i A (12017691)[15] | [16] | CLD 23 | MLTPL | |
| SW-370-34i (A) (11011525)[29] | 8" X 40" | CLD 23 | MLTPL | |
| SW30HR-380 A (279246)[29] | 8" X 40" | CLD 23 | MLTPL | |
| SW30HR-380 D (12022650)[29] | 8" x 40" | CLD 23 | MLTPL | |
| SW30HR-380 W (135137)[29] | 8" X 40" | CLD 23 | MLTPL | |
| SW30HRLE-400 A (279243)[29] | 8" X 40" | CLD 23 | MLTPL | |
| SW30HRLE-400 D (12020493)[29] | 8" x 40" | CLD 23 | MLTPL | |
| SW30HRLE-400 W (217822)[29] | 8" X 40" | CLD 23 | MLTPL | |
| SW30HRLE-440 A (365221)[29] | 8" X 40" | CLD 23 | MLTPL | |
| SW30HRLE-440 D (12020604)[29] | 8" x 40" | CLD 23 | MLTPL | |
| SW30HRLE-440 W (337650)[29] | 8" X 40" | CLD 23 | MLTPL | |
| SW30HRLE-440i A (365222)[29] | 8" X 40" | CLD 23 | MLTPL | |
| SW30HRLE-440i D (12020620)[29] | 8" x 40" | CLD 23 | MLTPL | |
| SW30HRLE-440i W (335157)[29] | 8" X 40" | CLD 23 | MLTPL | |
| SW30XFR-400-34 A (99104361)[29] | 8" x 40" | CLD 23 | MLTPL | |
| SW30XFR-400-34 D (12022636)[29] | 8" x 40" | CLD 23 | MLTPL | |
| SW30XFR-400-34 W (99104360)[29] | 8" x 40" | CLD 23 | MLTPL | |
| SW30XFR-400-34i A (12020446)[29] | 8" x 40" | CLD 23 | MLTPL | |
| SW30XFR-400-34i D (12022637)[29] | 8" x 40" | CLD 23 | MLTPL | |
| SW30XFR-400-34i W (12020475)[29] | 8" x 40" | CLD 23 | MLTPL | |
| SW30XHR 400 A (12017667) | [31] | CLD 23 | MLTPL | |
| SW30XHR 440 A (12017669) | [31] | CLD 23 | MLTPL | |
| SW30XHR 440i A (12017733) | [31] | CLD 23 | MLTPL | |
| SW30XLE - 400 A (12017559)[23] | [24] | CLD 23 | MLTPL | |
| SW30XLE - 400 D (12020601)[23] | [24] | CLD 23 | MLTPL | |
| SW30XLE - 440 D (12020600)[23] | [24] | CLD 23 | MLTPL | |
| SW30XLE - 440i D (12020589)[23] | [24] | CLD 23 | MLTPL | |
| SW30XLE 400-34 (12113160) W[7] | 8" x 40" | CLD 23 | MLTPL | |
| SW30XLE 400-34 (12113161) D[7] | 8" x 40" | CLD 23 | MLTPL | |
| SW30XLE-440 A (364711)[23] | [24] | CLD 23 | MLTPL | |
| SW30XLE-440i A (364710)[23] | [24] | CLD 23 | MLTPL | |
| SWBR-200 A (12098108)[32] | 8 x 40 in | CLD 23 | MLTPL | |
| XLE-440 A (279216) | [18] | CLD 23 | MLTPL | |
| XLE-440 W (101060) | [18] | CLD 23 | MLTPL | |
| XLE-440-28 W (12084640) | [18] | CLD 23 | MLTPL | |
| XLE-440i A (325275) | [18] | CLD 23 | MLTPL | |
| XLE-440i W (324657) | [18] | CLD 23 | MLTPL | |
| XLE-B-440 A (12013838) | [18] | CLD 23 | MLTPL | |
[7] SW30XLE-400 and SW30XLE-440 are certified for a minimum permeate flow rate of 8,200
gallons/day.
SW30XLE 400-34 (12113160) W and SW30XLE 400-34 (12113161) D are certified for a minimum
permeate flow rate of 7,650 gallons/day.
SW30XLE-440i and FilmTec™ SOAR 7000i are certified for a minimum permeate flow rate of
1,500 gallons/day.
Product requires a per-service flush for 1 hour at 400 psi.
[9] Elements sold under 12030646 SW 8040 SP or 12030564 BW 8040 SP are marked as "surplus"
before shipping to customers.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
state laws and the U.S. Safe Drinking Water Act.
[10] Sizes are expressed as diameter x length.
Certified for a minimum daily flow of 1,650 gallons.
Product requires a pre-rinse of 0.5 hour (30 minutes) at 100 psi.
[11] BW30-365 A (279222), BW30-365 D (80773), BW30 PRO-365 D (12075864), BW30 PRO-365 W
(12075881), BW30 PRO-400A (12075562), BW30-400 D (98650), ), BW30 PRO-400D (12075563),
BW30-400 W (93396), BW30 PRO-400-34A (12075564), BW30 PRO-400-34D (12075565),
BW30-400-34i A (279236) BW30 PRO-400-34i (12075703), BW30-400-34i D (248151), BW30
PRO-400-34i (12075587) models are certified for a minimum daily flow of 36,000 liters
per day.
[12] BW30-4040 D (80783), BW30-4040 W (80782) models are certified for a minimum daily flow
of 644 liters per day. BW30-365 W (80772), BW30-400-34 W (99033318), and BW30-400-34i W
(248152), BW30 PRO-400 A 12075562, BW30 PRO-400 D 12075563, BW30 PRO 400-34 A 12075564,
BW30 PRO 400-34 D 12075565, BW30 PRO 400-34i D 12075587, BW30 PRO 400-34i A 12075703
models are certified for a minimum daily flow of 36000 liters per day. Product requires
a pre-rinse of 0.5 hour (30 minutes) at 100 psi.
[13] Product requires a pre-rinse of 0.5 hour (30 minutes) at 100 psi.
Certified for the following minimum permeate flows:
40,698 liters/day:
BW30HR-440 A (11025076)
BW30HR-440 D (11025074)
BW30HR-440i A (317487)
BW30HR-440i D (317529)
BW30XHR-440 A (12029161)
BW30XHR 440 D (12029154)
BW30XHR 440i A (12080554)
BW30XHR 440i D (12080604)
36,998 liters/day:
BW30XFR-400-34 (D) 11022769
BW30XFR-400-34 A (11025073)
BW30XFR-400-34i A (297346)
BW30XFR-400-34i D (315924)
FilmTec™ SOAR 5000 D (12119804)
FilmTec™ SOAR 5000 A (12119675)
FilmTec™ SOAR 5000i D (12119673)
FilmTec™ SOAR 5000i A (12119678)
FilmTec™ SOAR 5000i D
FilmTec™ SOAR 5000i A
FORTILIFE™ CR100 A (99029709)
FORTILIFE™ CR100 D (99029748)
FORTILIFE™ CR100i A (99029708)
FORTILIFE™ CR100i D (99029827)
28,958 liters/day:
FORTILIFE™ XC70 (A) (12010199)
FORTILIFE™ XC-N (A) (99052663)
FORTILIFE™ XC-N (A) (12070784)
FORTILIFE™ XC80 (A) (99052661)
12,000 liters/day:
FORTILIFE™ CR200 A (12026677)
FORTILIFE™ CR200 D (12026676)
9,330 liters/day:
LC HR-4040 D (343771)
LC HR-4040 W (343770)
8,043 liters/day:
LCLE 4040 D (356603)
LCLE 4040 W (356602)
7,721 liters/day:
FORTILIFE™ CR100-4040 PILOT W (99083585)
2,840 liters/day:
FORTILIFE™ XC-N HP A (12015379)
[14] Certified sizes are 8" x 40" or 4" x 40".
[15] Product requires a pre-rinse of 0.5 hour (30 minutes) at 100 psi.
Certified for the following minimum permeate flow:
40,698 liters/day:
BW30HRLE-440 A (99044291)
BW30HRLE-440 D (99044262)
BW30HRLE-440 W (99044294)
BW30HRLE-440i W (99044305)
BW30HRLE-440i A (99044231)
BW30HRLE-440i D (99044309)
ECO PRO 440 A (99041027)
ECO PRO 440 D (99040991)
ECO PRO 440i A (99041026)
ECO PRO 440i D (99041000)
ECO Platinum 440i A (99046537)
ECO Platinum 440i D (99046696)
33,781 liters per day:
FilmTec™ SOAR 4000i D
FilmTec™ SOAR 4000i A
BW30XFRLE-400/34 A (99044371)
BW30XFRLE-400/34 D (99044497)
BW30XFRLE-400/34i A (99044306)
BW30XFRLE-400/34i D (99044372)
36,998 liters/day:
ECO PRO 400 D (99040808)
ECO PRO 400 W (99040807)
ECO PRO 400i A (99046698)
ECO PRO 400i D (99046699)
29,116 liters/day:
FilmTec™ SOAR 6000i D
FilmTec™ SOAR 6000i A
SEAMAXX-440 A (12017690)
SEAMAXX-440i A (12017691)
SEAMAXX-440 D (12020606)
SEAMAXX-440i D (12020605)
[16] Certified size is 8" x 40".
[17] Certified for the following minimum permeate flows:
36,998 liters/day:
BW30XHR PRO-400-34 D 12075704
BW30XHR PRO-400-34 A 12075640
BW30XHR PRO-400-34i A 12075762
BW30XHR PRO-400-34i D 12075583
[18] XLE-2540 W (154544) models are certified for a minimum daily flow of 3,123 liters per
day. XLE-440i A (325275), XLE-440 W (101060), XLE-440 A (279216), XLE-B-440 (12013838),
XLE-440i W (324657) and XLE-440 W (12084640) models are certified for a minimum daily
flow of 47,300 liters per day.
[19] 8" x 40" elements must be flushed at 9.7 gallons per minute for 1 hour prior to use.
Size is expressed as diameter x length.
- W in the trade name indicates the element is shipped wet
- D in the trade name indicates the element is shipped dry
- A in the trade name indicates the element is shipped with a certification statement.
[20] Sizes are expressed as diameter x length.
Certified for a minimum daily flow of 2,900 gallons.
Product requires a pre-rinse of 0.5 hour (30 minutes) at 100 psi.
[21] Sizes are expressed as diameter x length.
Certified for a minimum daily flow of 1,530 gallons.
Product requires a 30-minute flush at 100 psi.
[22] The NF90-2540 W (149982), NF90-4040 W (149983), NF90-400-34 D (12073762), NF90-400-34 W
(12073763), NF90B-400 W (12082237), NF90B-400-34 D (12082260) and NF90B-400-34 A
(12082246) models are certified for a minimum daily flow rate of 2,059 liters per day.
NF90-400-34i D (11023066), NF90-400-34i A (11023067) FilmTec™ SOAR 3000i D (12031050)
and FilmTec™ SOAR 3000i A (12031044) are certified for a minimum daily flow rate of
28,400 liters per day. Product requires a pre-rinse of 0.5 hour (30 minutes) at 100 psi.
[23] The SW30XLE 480i, SW30XLE-370-34i, SWXLE-400 and SW30XLE-440 elements are Certified for
a minimum permeate flow rate of 8,200 gallons/day.
The SW30XLE-440i and FilmTec™ SOAR 7000i D and FilmTec™ SOAR 7000i A elements are
certified for a minimum permeate flow rate of 1,500 gallons/day.
Product requires a 1 hour flush at 400 psi.
Size is expressed as diameter x length.
- D in the trade name indicates the element is shipped dry
- W in the trade name indicates the element is shipped wet
- A in the trade name indicates the element is shipped with a certification statement.
[24] Certified size is 8" x 40"
[25] Certified for a minimum daily flow of 7,400 gallons. Product requires a pre-rinse of
2000 ppm NaCl at 12 GPM (125 psi) for 1 hour. Certified size is 6" x 40". Size is
expressed as diameter x length. W in the trade name indicates the element is shipped
wet. D in the trade name indicates the element is shipped dry. A in the trade name
indicates the element is shipped with a certification statement.
[26] Sizes are expressed as diameter x length.
Certified for a minimum daily flow of 2,400 gallons.
Product requires a pre-rinse of 0.5 hour (30 minutes) at 100 psi.
[27] NF270-2540 W (149986), NF270-4040 W (149987), NF270-400-34 A (12073738) and NF270-400-34
D (12073764) models are certified for a minimum daily flow of 2,059 liters per day.
NF270-400/34i D (11023070), NF270-400/34i W (11023068), NF270-440 A (12027210),
NF270-440 D (12027108) and NF270-440 W (12027109) are Certified for a minimum daily flow
of 2,500 liters per day. Product requires a flush for 30 minutes at 100 psi.
[28] NF270-400-34i D (11023070), NF270-400-34i A (11023068), NF270 440 A (12027210), NF270
440 D (12027108), NF270B 85.0 (12082679), NF270B-400-34 A (12082717), NF270B-400-34 D
(12082811), NF270B-440 A (12082813) and NF270B-440 D (12082814) are certified for a
minimum daily flow of 2,500 liters per day.
[29] Product requires a 1 hour flush at 400 psi.
The 4" x 40" element is Certified for a minimum daily flow of 4,846 L.
The 8" x 40" elements (SW30HRLE-440i) are Certified for a minimum daily flow of 5,678 L.
The 8” x 40” elements (SW30XFR-400-34 A (99104361), SW30XFR-400-34 D (12022636)and
SW30XFR-400-34 W (99104360), SW30XFR-400-34i A (12020446), SW30XFR-400-34i D (12022637)
and SW30XFR-400-34i W (12020475) are certified for a minimum daily flow of 18,168 L.
The 8" x 40" elements (SW-370-34i, SW30HR-380, SW30XFR-400-34 D (12022636), SW30HR-380 D
(12022650) SW30HRLE-400, SW30HRLE-400i and SW30HRLE-440) are Certified for a minimum
daily flow of 21,558 L.
[31] Certified for a minimum daily flow of 5,100 Gallons.
Element size is 8" x 40".
Product requires a 1 hour flush at 400 psi.
[32] Trade name SWBR-200 A (12098108) is certified for a minimum daily flow rate of 40,220
liters.
|
||||
[30] Listed size is diameter x length.
Certified for a minimum daily flow of 1560 gallons.
Product requires a 1 hour flush at 400 psi.
Number of matching Manufacturers is 1
Number of matching Products is 259
Processing time was 0 seconds

