NSF Product and Service Listings

These NSF Official Listings are current as of Friday, May 17, 2024 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.

Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/Wastewater/Listings.asp?Standard=040&

NSF/ANSI 40
Residential Wastewater Treatment Systems

Adelante Consulting, Inc.
359 Dina Nelson Road
Corrales, NM 87048
United States
505-920-4150
Visit this company's website

Facility : Ronkonkoma, NY

Model Number	Rated Capacity Gallons/Day	Classification
Pugo System	750	Class I

Aero-Stream, LLC
W300N7706 Christine Lane
Hartland, WI 53029
United States
877-254-7093
262-538-4000
Visit this company's website

Facility : Hartland, WI

Model Number	Rated Capacity Gallons/Day	Classification
Eco-Nest AS450-1[1] [2] [3]	450	Class II
Eco-Nest AS450-2[1] [2] [3]	450	Class I
Eco-Nest AS450-3[1] [2] [3]	450	Class I
Eco-Nest AS500-1[1] [2] [3]	500	Class II
Eco-Nest AS500-2[1] [2] [3]	500	Class I
Eco-Nest AS500-3[1] [2] [3]	500	Class I
Eco-Nest AS600-1[1] [2] [3]	600	Class II
Eco-Nest AS600-2[1] [2] [3]	600	Class I
Eco-Nest AS600-3[1] [2] [3]	600	Class I
Eco-Nest AS750-1[1] [2] [3]	750	Class II
Eco-Nest AS750-2[1] [2] [3]	750	Class I
Eco-Nest AS750-3[1] [2] [3]	750	Class I
Eco-Nest AS1000-1[1] [2] [3]	1000	Class II
Eco-Nest AS1000-2[1] [2] [3]	1000	Class I
Eco-Nest AS1000-3[1] [2] [3]	1000	Class I
Eco-Nest AS1500-1[1] [2] [3]	1500	Class II
Eco-Nest AS1500-2[1] [2] [3]	1500	Class I
Eco-Nest AS1500-3[1] [2] [3]	1500	Class I
[1] The wastewater treatment system series ranging from 450 - 1500 GPD are authorized to be used with specific Roth and Norwesco alternate tanks. Reference the manufacturer's use instructions for the specific tank specifications. [2] The wastewater treatment system series ranging from 450 - 1500 GPD are authorized to be used with specific Infiltrator & Chemtainer alternate tanks. Reference the manufacturer's use instructions for the specific tank specifications. [3] The wastewater treatment system series ranging from 450 - 1500 GPD are authorized to be used with specific Ace Roto/Den Hartog Industries and Snyder Industries alternate tanks. Reference the manufacturer's use instructions for the specific tank specifications.

Anua
4106 Bernau Avenue
Greensboro, NC 27407
United States
800-787-2356
336-547-9338
Visit this company's website

Facility : Greensboro, NC

Model Number	Rated Capacity Gallons/Day	Classification
Quanics AeroCell Series
Q-ATS-A400-2-80/20-AC[1]	800	Class I
Q-ATS-A400-3-80/20-AC[1]	1200	Class I
Q-ATS-A400-80/20-AC[1]	400	Class I
Q-ATS-540-AC-N	500	Class I
Q-ATS-1060-AC-N	800	Class I
Q-ATS-1530-AC-N	1500	Class I
ATS-NS500-AC-N	500	Class I
ATS-NS750-AC-N	660	Class I
ATS-NS1000-AC-N	800	Class I
ATS-NS500-80/20-AC-N[1]	500	Class I
ATS-NS500-2-80/20-AC-N[1]	1000	Class I
ATS-NS500-3-80/20-AC-N[1]	1500	Class I
ATS-NS750-80/20-AC-N [1]	660	Class I
ATS-NS750-2-80/20-AC-N[1]	1320	Class I
[1] Treatment tank(s) contain an 80/20 divider.
Quanics BioCoir Series
Q-ATS-A400-2-80/20-AC[1]	800	Class I
Q-ATS-A400-3-80/20-AC[1]	1200	Class I
Q-ATS-A400-80/20-AC[1]	400	Class I
Q-ATS-540-AC-N	500	Class I
Q-ATS-1060-AC-N	800	Class I
Q-ATS-1530-AC-N	1500	Class I
ATS-NS500-AC-N	500	Class I
ATS-NS750-AC-N	660	Class I
ATS-NS1000-AC-N	800	Class I
ATS-NS500-80/20-AC-N[1]	500	Class I
ATS-NS500-2-80/20-AC-N[1]	1000	Class I
ATS-NS500-3-80/20-AC-N[1]	1500	Class I
ATS-NS750-80/20-AC-N[1]	660	Class I
ATS-NS750-2-80/20-AC-N[1]	1320	Class I
[1] Treatment tank(s) contain an 80/20 divider.
Puraflo Series
P150N*3A	450	Class I
P150N*3B[2] [3]	450	Class I
P150N*4A	600	Class I
P150N*4B	600	Class I
P150N*5A	750	Class I
P150N*5B	750	Class I
P150N*6A	900	Class I
P150N*6B	900	Class I
P150N*7A	1050	Class I
P150N*7B	1050	Class I
P150N*8A	1200	Class I
P150N*8B	1200	Class I
P150N*9A	1350	Class I
P150N*9B	1350	Class I
P150N*10A	1500	Class I
P150N*10B	1500	Class I
P300NP*2A	600	Class I
P300NP*2B	600	Class I
P450NP*1A	450	Class I
P450NP*1B	450	Class I
P750NP*1A	750	Class I
P750NP*1B	750	Class I
[2] Suffix 1 denotes a 1000 gallon pretreatment tank. [3] Suffix 2 denotes a 1000 gallon pump tank.
Puraflo Coir Series[4]
Puraflo® Coir P200C*7[10]	1400	Class I
Puraflo® Coir P200C*6[9]	1200	Class I
Puraflo® Coir P200C*5[8]	1000	Class I
Puraflo® Coir P200C*3[6]	600	Class I
Puraflo® Coir P200C*4[7]	800	Class I
Puraflo® Coir P200C*2 [5]	400	Class I
[4] Puraflo Coir system consists of pods rated to treat 200 gal/day of wastewater and require pretreatment in septic tanks using locally sourced tanks. Tank volumes shall meet the specified volume, and up to 50% excess volume, to meet certification requirements. [5] Requires installation with a 1,000 gallon septic tank and 500 gallon dosing tank. [6] Requires installation with a 1,500 gallon septic tank and 750 gallon dosing tank. [7] Requires installation with a 2,000 gallon septic tank and 1,000 gallon dosing tank. [8] Requires installation with a 2,500 gallon septic tank and 1,250 gallon dosing tank. [9] Requires installation with a 3,000 gallon septic tank and 1,500 gallon dosing tank. [10] Requires installation with a 3,500 gallon septic tank and 1,750 gallon dosing tank.
PuraSys Model Series
PS1-4	400	Class I
PS1-5	500	Class I
PS1-6	600	Class I
PS1-7	700	Class I
PS1-8	800	Class I
PS1-9	900	Class I
PS1-10	1000	Class I
PS1-11	1100	Class I
PS1-12	1200	Class I
PS1-13	1300	Class I
PS1-14	1400	Class I

AquaKlear, Inc.
876 North Bierdeman Road
Pearl, MS 39208
United States
877-936-7711
601-936-7711

Facility : Pearl, MS

Model Number	Rated Capacity Gallons/Day	Classification
AK500C[1] [4] [5] [6] [7]	500	Class I
AK500F[2] [8] [9]	500	Class I
AK500FF[3] [12]	500	Class I
AK600C[1]	600	Class I
AK6PT	600	Class I
AK600F[2] [10] [11]	600	Class I
AK600FF[3]	600	Class I
AK750C[1]	750	Class I
AK750F[2]	750	Class I
AK750FF[3]	750	Class I
AK800C[1]	800	Class I
AK800F[2]	800	Class I
AK800FF[3]	800	Class I
AK1000C[1]	1000	Class I
AK1000F[2]	1000	Class I
AK1000FF[3]	1000	Class I
AK1500C[1]	1500	Class I
AK1500CA[1] [13]	1500	Class I
AK1500F[2]	1500	Class I
AK1500FF[3]	1500	Class I
[1] Suffix C denotes concrete tank. [2] Suffix F denotes fiberglass tank. [3] Suffix FF denotes fiberglass tank with flat top. [4] Model AK500C also a component of the model AK5B1 treatment system. This complete model has not been tested by NSF. Complete model AK5B1 includes a 300 gallon pretreatment tank and a 500 gallon pump tank. [5] Model AK500C also a component of the model AK5B2 treatment system. This complete model has not been tested by NSF. Complete model AK5B2 includes a 400 gallon pretreatment tank and a 555 gallon pump tank. [6] Model AK500C also a component of the model AK5B3 treatment system. This complete model has not been tested by NSF. Complete model AK5B3 includes a 425 gallon pretreatment tank and a 750 gallon pump tank. [7] Model AK500C also a component of the model AK500C3P treatment system. This complete model has not been tested by NSF. Complete model AK500C3P includes a 300 gallon pretreatment tank. [8] Model AK500F also a component of the model AK365F treatment system. This complete model has not been tested by NSF. Complete model AK365F includes a 300 gallon pretreatment tank and a 500 gallon pump tank. [9] Model AK500F also a component of model AK500FC. This complete model has not been tested by NSF. Complete model AK500FC includes a 100 gallon chlorine tank. [10] Model AK600F also a component of model AK500F3P. This complete model has not been tested by NSF. Complete model AK600F3P includes a 300 gallon pretreatment tank and a 100 gallon chlorine tank. [11] Model AK600F also a component of model AK600FP5. This complete model has not been tested by NSF. Complete model AK600FP5 includes a 500 gallon pump tank. [12] Model AK500FF also a component of model AKF5B1. This complete model has not been tested by NSF. Complete model AKF5B1 includes a 500 gallon pretreatment tank and a 750 gallon pump tank. [13] Suffix A denots a low profile tank.

NOTE: This company may sell products complying with all applicable requirements for
      Certification nationally and internationally, but has advised NSF of authorized
      representatives physically located in the following:
      
      Arkansas         Florida          Georgia          Illinois         Louisiana
      Mississippi      Texas
      
      Contact the Listed company directly for further product information and availability in
      your area.

ATB WATER GmbH
Südstraße 2
32457 Porta Westfalica
Germany
49 573 130 2300
Visit this company's website

Facility : Porta Westfalica, Germany

Model Number	Rated Capacity Gallons/Day	Classification
ECOMAX 400	400	Class I
ECOMAX 540	540	Class I
ECOMAX 600	600	Class I
ECOMAX 680	680	Class I
ECOMAX 810	810	Class I
ECOMAX 1050	1,050	Class I
ECOMAX 1280	1,280	Class I

Bergmann Beton + Abwassertechnik GmbH
Am Zeisig 8
D-09322 Penig
Germany
49 3738 186115

Facility : Kitchener, Ontario, Canada

Model Number	Rated Capacity Gallons/Day	Classification
WSB 400	400	Class I
WSB 500	530	Class I
WSB 600	660	Class I
WSB 750	790	Class I
WSB 1000	1000	Class I
WSB 1250	1320	Class I
WSB 1500	1500	Class I

Bio-Microbics, Inc.
16002 West 110th Street
Lenexa, KS 66219
United States
800-753-FAST
913-422-0707
Visit this company's website

Facility : Lenexa, KS

Model Number	Rated Capacity Gallons/Day	Classification
BioBarrier® MBR 0.5	500	Class I
BioBarrier® MBR 0.5-N	500	Class I
BioBarrier® MBR 1.0	1000	Class I
BioBarrier® MBR 1.0-N	1000	Class I
BioBarrier® MBR 1.5	1500	Class I
BioBarrier® MBR 1.5-N	1500	Class I
MicroFast 0.5[1]	500	Class I
MicroFast 0.625	625	Class I
MicroFast 0.75[2]	750	Class I
MicroFast 0.9[3]	900	Class I
MicroFast 1.5[4]	1500	Class I
[1] Beginning with serial number MCF2265B. [2] Beginning with serial number MCF4000B. [3] Beginning with serial number MCF3026B. [4] Beginning with serial number MCF6006B.

NOTE: Units accepted with either concrete, fiberglass or plastic tanks.
      
      This company may sell products complying with all applicable requirements for
      Certification nationally and internationally, but has advised NSF of authorized
      representatives physically located in the following:
      
      Alaska           Arizona          British Columbia California       Colorado
      Florida          Georgia          Hawaii           Idaho            Illinois
      Iowa             Kansas           Maryland         Massachusetts    Michigan
      Minnesota        Missouri         Nevada           New Mexico       New York
      North Carolina   Nova Scotia      Ohio             Oklahoma         Ontario
      Pennsylvania     South Carolina   Texas            Vermont          Virginia
      Washinghton      Wisconsin
      
      Contact the Listed company directly for further product information and availability in
      your area.

Bionest Technologies Inc
55, 12e Rue
C.P. 10070
Shawinigan, QC G9T 5K7
Canada
866-538-5662
819-538-5662
Visit this company's website

Facility : Shawinigan, Québec, Canada

Model Number	Rated Capacity Gallons/Day	Classification
OT-100	1000	Class I
OT-125	1250	Class I
OT-150	1500	Class I
OT-40	400	Class I
OT-45	450	Class I
OT-50	500	Class I
OT-55	550	Class I
OT-60	600	Class I
OT-70	700	Class I
OT-75	750	Class I

Canwest Tanks and Ecological Systems Ltd.
11975 Old Yale Road
Surrey, BC V3V 3X4
Canada
604-376-4843

Facility : Surrey, British Columbia, Canada

Model Number	Rated Capacity Gallons/Day	Classification
CWS MBBR Series
CWS-MBBR-1000	1000	Class I
CWS-MBBR-800	800	Class I
CWS-MBBR-600	600	Class I
CWS-MBBR-500	500	Class I
CWS-MBBR-1500	1500	Class I

Clearstream Wastewater Systems, Inc.
P.O. Box 7568
Beaumont, TX 77726-7568
United States
409-755-1500

Facility : Lumberton, TX

Model Number	Rated Capacity Gallons/Day	Classification
500N[1] [2] [3]	500	Class I
500NC[1] [2] [3]	500	Class I
500NC2[1] [2] [3]	500	Class I
500NC3[1] [2] [3]	500	Class I
500NCS[1] [2] [3]	500	Class I
500NS[1] [2] [3]	500	Class I
500NU[1] [2] [3]	500	Class I
600N[1] [2] [3]	600	Class I
600NC[1] [2] [3]	600	Class I
600NC2[1] [2] [3]	600	Class I
600NC3[1] [2] [3]	600	Class I
600NU[1] [2] [3]	600	Class I
750N[1] [2] [3]	750	Class I
750NC[1] [2] [3]	750	Class I
750NC2[1] [2] [3]	750	Class I
800N[1] [2] [3]	800	Class I
800NC[1] [2] [3]	800	Class I
800NC2[1] [2] [3]	800	Class I
1000N[1] [2] [3]	1000	Class I
1000N-B[1] [2] [3]	1000	Class I
1000NC[1] [2] [3]	1000	Class I
1000NC-B[1] [2] [3]	1000	Class I
1000NCD[1] [2] [3]	1000	Class I
1000ND[1] [2] [3]	1000	Class I
1000NSD[1] [2] [3]	1000	Class I
1200NCD[1] [2] [3]	1200	Class I
1200ND[1] [2] [3]	1200	Class I
1500N[1] [2] [3]	1500	Class I
1500N-B[1] [2] [3]	1500	Class I
1500NC[1] [2] [3]	1500	Class I
1500NC-B[1] [2] [3]	1500	Class I
1500NCD[1] [2] [3]	1500	Class I
1500ND[1] [2] [3]	1500	Class I
[1] Tested and Certified with a pretreatment tank. Model 500NC2 includes 500 gallon pretreatment tank. Model 500NC3 includes 500 gallon pretreatment tank. Model 500NU includes 300 gallon pretreatment tank. Model 600NC2 includes 500 gallon pretreatment tank. Model 600NC3T includes 400 gallon pretreatment tank. Model 600NU includes 400 gallon pretreatment tank. Model 750NC2 includes 500 gallon pretreatment tank. Model 800NC2 includes 500 gallon pretreatment tank. Model 1000NCD includes 500 gallon pretreatment tank. Model 1200NCD includes 600 gallon pretreatment tank. Model 1500NCD includes 750 gallon pretreatment tank. [2] Tested and Certified with and without a pump tank. Model 500NC3-500 includes 500 gallon effluent pump tank. Model 500NC3-750 includes 750 gallon effluent pump tank. Model 500NU includes 550 gallon effluent pump tank. Model 600NC3T includes 720 gallon effluent pump tank. Model 600NU includes 680 gallon effluent pump tank. [3] Tested and Certified with and without model CS-1100 Effluent Filter in the effluent pump tank.

NOTE: Suffix N   - Fiberglass tanks
      Suffix NC  - Concrete tanks
      Suffix NC2 - One piece concrete design with pretreatment tank
      Suffix NC3 - One piece concrete design with pretreatment and effluent pump tanks
      Suffix ND  - Duel piece fiberglass design with pretreatment tank
      Suffix NU  - One piece fiberglass design with pretreatment and effluent pump tanks
      
      This company may sell products complying with all applicable requirements for
      Certification nationally and internationally, but has advised NSF of authorized
      representatives physically located in the following:
      
      Alabama        Alaska     Arizona     Arkansas      California     Colorado
      Delaware       Florida    Georgia     Illinois      Iowa           Kansas
      Kentucky       Michigan   Missouri    Nebraska      New Mexico     New York
      North Carolina Ohio       Oklahoma    Pennsylvania  South Carolina
      Texas          Virginia   Washington  West Virginia Wisconsin
      
      Contact the Listed company directly for further product information and availability in
      your area.

Consolidated Treatment Systems, Inc.
1501 Commerce Center Drive
Franklin, OH 45005
United States
937-746-2727
Visit this company's website

Facility : Franklin, OH

Model Number	Rated Capacity Gallons/Day	Classification
Enviro-Guard ENV-0.75	750	Class I
Enviro-Guard ENV-0.75M[1]	750	Class I
Multi-Flo FTB 0.5	500	Class I
Multi-Flo FTB 0.6	600	Class I
Multi-Flo FTB 0.6-C	600	Class I
Multi-Flo FTB 0.75	750	Class I
Multi-Flo FTB 0.75-C	750	Class I
Multi-Flo FTB 1.0	1000	Class I
Multi-Flo FTB 1.0-C	1000	Class I
Multi-Flo FTB 1.5	1500	Class I
Nayadic M-6A[2] [3]	500	Class I
Nayadic M-8A	600	Class I
Nayadic M-1050A	800	Class I
Nayadic M-1200A	1000	Class I
Nayadic M-2000A	1500	Class I
SYBR-AER 500	500	Class I
SYBR-AER 500-IM1530[4]	500	Class I
SYBR-AER-SA1500[5]	500	Class I
SYBR-AER 600	600	Class I
SYBR-AER 800	800	Class I
SYBR-AER 1000	1000	Class I
SYBR-AER 1500	1500	Class I
[1] System consists of a modular design with the pretreatment and dosing tank as separate 500 gallon tanks or as one two-compartment 1000 gallon tank. [2] Nayadic M-6A also a component of the Tank-N-Tank system. Complete Tank-N-Tank system has not been tested by NSF. Complete Tank-N-Tank system includes Nayadic M-6A 500 gpd treatment system surrounded by a pump chamber, creating a single tank system. Tank-N-Tank System is manufactured in both fiberglass and concrete. [3] Nayadic M-6A also a component of Nayadic M6-EV. The complete M6-EV system has not been tested by NSF. The complete M6-EV includes the Nayadic M-6A 500 gpd treatment system surrounded by a pretreatment tank, creating a single tank system. The M6-EV system is manufactured only in fiberglass. [4] Suffix IM1530 denotes molded poly tank. [5] Suffix SA1500 denotes fiberglass tank.

NOTE: This company may sell products complying with all applicable requirements for
      Certification nationally and internationally, but has advised NSF of authorized
      representatives physically located in the following:
      
      Alabama          Arizona          Arkansas         Florida          Georgia
      Hawaii           Illinois         Iowa             Maine            Mississippi
      Missouri         New Jersey       New Mexico       New York         Ohio
      Pennsylvania     Texas            Virginia         Washington       West Virginia
      Wisconsin
      
      Contact the Listed company directly for further product information and availability in
      your area.

Desoto Concrete Products, Inc.
220 Highway 305 North
Olive Branch, MS 38654
United States
888-445-9347
662-890-1688

Facility : New Albany, MS

Model Number	Rated Capacity Gallons/Day	Classification
H-TWO-O Series 25A[1] [2]	500	Class I
H-TWO-O Series 25T[3] [4]	500	Class I
H-TWO-O Series 35A[1] [5] [6] [7]	500	Class I
H-TWO-O Series 35T[3] [8] [9]	500	Class I
H-TWO-O Series 35A[1] [10]	520	Class I
H-TWO-O Series 35AA	520	Class I
H-TWO-O Series 35AA1	520	Class I
H-TWO-O Series 35AA8	520	Class I
H-TWO-O Series 252P[11]	520	Class I
H-TWO-O Series 36A1[1]	600	Class I
H-TWO-O Series 265A[1]	650	Class I
H-TWO-O Series 265P[11]	650	Class I
H-TWO-O Series 275A[1] [2]	750	Class I
H-TWO-O Series 275T[3] [12]	750	Class I
H-TWO-O Series 375A[1] [5]	750	Class I
H-TWO-O Series 375A2[13]	750	Class I
H-TWO-O Series 375T[3] [14]	750	Class I
H-TWO-O Series 275AA[15]	780	Class I
H-TWO-O Series 275AT[16]	780	Class I
H-TWO-O Series 375AA[15]	780	Class I
H-TWO-O Series 375AT[16]	780	Class I
H-TWO-O Series 2100A[1] [2]	1000	Class I
H-TWO-O Series 2100T[3]	1000	Class I
H-TWO-O Series 3100A[1] [5]	1000	Class I
H-TWO-O Series 3100T[3]	1000	Class I
[1] Suffix A denotes a tampered wall tank. [2] Model H-TWO-O Series 25A, 275A, and 2100A also as a component of the H-TWO-O Series 25A1, 275A1, and 2100A1. Complete model H-TWO-O Series 25A1, 275A1, and 2100A1 includes a post treatment pump tank in addition to the H-TWO-O Series 25A, 275A, and 2100A. The pump chamber was not tested and is not included as a component of the Certified model. [3] Suffix T denotes a tampered wall tank. [4] Model H-TWO-O Series 25T also as a component of the H-TWO-O Series 25T1 and 25T2 with effluent pump chamber. The pump chamber was not tested and is not included as a component of the Certified model. [5] Model H-TWO-O Series 35A, 375A, and 3100A also as a component of the H-TWO-O Series 35A1, 375A1, and 3100A1. Complete model H-TWO-O Series 35A1, 375A1, and 3100A1 includes a post treatment pump tank in addition to the H-TWO-O Series 35A, 375A, and 3100A. The pump chamber was not tested and is not included as a component of the Certified model. [6] Model H-TWO-O Series 35A.8 also a component of the H-TWO-O Series 35A. Complete model H-TWO-O Series 35A.8 includes a pump tank. The pump tank was not tested and is not included as a component of the Certified model. [7] Model H-TWO-O Series 35A also a component of the H-TWO-O Series 35A.A. Complete model H-TWO-O Series 35A.A includes a pump tank. The pump tank was not tested and is not included as a component of the Certified model. [8] Model H-TWO-O Series 35T also as a component of the H-TWO-O Series 35T1 and 35T2 with effluent pump chamber. The pump chamber was not tested and is not included as a component of the Certified model. [9] Model H-TWO-O Series 35T also as a component of the H-TWO-O Series 35T.8 with effluent pump chamber. The pump chamber was not tested and is not included as a component of the Certified model. [10] Model H-TWO-O also as a component of Model H-TWO-O 352A.8. Complete Model H-TWO-O 352A.8 is approved with a disinfection compartment. [11] Suffix P denotes polyethylene tanks. [12] Model H-TWO-O Series 275T also as a component of the H-TWO-O Series 275T1 and 275T2 with effluent pump chamber. The pump chamber was not tested and is not included as a component of the Certified model. [13] Model H-TWO-O Series 375A2 is approved with a pretreatment chamber sized between 500 and 750 gallons. [14] Model H-TWO-O Series 375T also as a component of the H-TWO-O Series 375T1 and 375T2 with effluent pump chamber. The pump chamber was not tested and is not included as a component of the Certified model. [15] Suffix AA indicates alternate (as in 750 GPD to 780 GPD) and a one piece tank [16] Suffix AT indicates alternate (as in 750 GPD to 780 GPD) with a tampered wall and two piece tank.

NOTE: This company may sell products complying with all applicable requirements for
      Certification nationally and internationally, but has advised NSF of authorized
      representatives physically located in the following:
      
      Mississippi      Texas
      
      Contact the Listed company directly for further product information and availability in
      your area.

E-Z Treat
P.O. Box 176
Haymarket, VA 20618
United States
703-753-4770
Visit this company's website

Facility : Catlett, VA

Model Number	Rated Capacity Gallons/Day	Classification
#600	600	Class I
D101 MODEL 600 2Pod 3Tank SIMPLEX	1200	Class I
D110 MODEL 600 2Pod 4Tank DUPLEX	1200	Class I
D111 MODEL 600 2Pod 4Tank SIMPLEX	1200	Class I
D115 MODEL 600 2Pod 3Tank DUPLEX	1200	Class I
D117 MODEL 600 1Pod 3Tank SIMPLEX	600	Class I
D118 MODEL 600 1Pod 2Tank SIMPLEX	600	Class I
D122 MODEL 600 1Pod 1Tank SIMPLEX	600	Class I
D141 MODEL 600 1Pod 2Tank Gravity	600	Class I
D147-INDP MODEL 600 2Pod 4Tank DUPLEX	1200	Class I
D149 MODEL 600 1Pod 2Tank 2 pump-combo	600	Class I
#750	750	Class I
D217 MODEL 750 1Pod 3Tank SIMPLEX	750	Class I
D218 MODEL 750 1Pod 2Tank SIMPLEX	750	Class I
D222 MODEL 750 1Pod 1Tank SIMPLEX	750	Class I
D240 750 1Pod 2Tank SIMPLEX OVER SPTIC	750	Class I
D241 750 1Pod 2Tank Gravity Discharge	750	Class I
D246 MODEL 750 1Pod 2Tank Gravity Feed	750	Class I
#1200	1200	Class I
D112 MODEL 1200 1Pod 4Tank SIMPLEX	1200	Class I
D113 MODEL 1200 1Pod 4Tank DUPLEX	1200	Class I
D116 MODEL 1200 1Pod 3Tank SIMPLEX	1200	Class I
D119 MODEL 1200 1Pod 2Tank SIMPLEX	1200	Class I
D142 1200 1Pod 2Tank Gravity Discharge	1200	Class I
D148-INDP MODEL 600 2Pod 3Tank DUPLEX	1200	Class I
D149 MODEL 1200 1Pod 4Tank SIMPLEX	1200	Class I
D150 1200 1Pod 4Tank DUPLEX DUAL OUTLET	1200	Class I
D151 1200 1Pod 3Tank Simplex DUAL OUTLET	1200	Class I
D102 MODEL 1200 2Pod 3Tank SIMPLEX	1500	Class I
D107 MODEL 1200 2Pod 4Tank SIMPLEX	1500	Class I
D109 MODEL 1200 2Pod 4Tank DUPLEX	1500	Class I
D114 MODEL 1200 2Pod 3Tank DUPLEX	1500	Class I
D120 MODEL 600 3Pod 3Tank DUPLEX	1500	Class I
D121 MODEL 600 3Pod 3Tank SIMPLEX	1500	Class I
D128 MODEL 600 3Pod 4Tank DUPLEX	1500	Class I
D152-INDP MODEL 1200 2Pod 4Tank DUPLEX	1500	Class I
D153-INDP MODEL 1200 2Pod 3Tank DUPLEX	1500	Class I
D201 MODEL 750 2Pod 3Tank SIMPLEX	1500	Class I
D210 MODEL 750 2Pod 4Tank DUPLEX	1500	Class I
D211 MODEL 750 2Pod 4Tank SIMPLEX	1500	Class I
D215 MODEL 750 2Pod 3Tank DUPLEX	1500	Class I
D225 MODEL 750 2Pod 2Tank SIMPLEX OVER	1500	Class I
D247-INDP MODEL 750 2Pod 4Tank DUPLEX	1500	Class I
D248-INDP MODEL 750 2Pod 3Tank DUPLEX	1500	Class I
D249 MODEL 750 1Pod 2Tank 2 pump-combo	750	Class I

NOTE: Each model may contain a combination of treatment pods that are either a 600 GPD module,
      a 750 GPD module or a 1200 GPD module. Various configurations of these modules are used
      to provide the essential wastewater treatment necessary for Standard compliance.

Ecological Tanks, Inc.
2247 Highway 151 North
Downsville, LA 71234
United States
800-277-8179
318-644-0397
Visit this company's website

Facility : Downsville, LA

Model Number	Rated Capacity Gallons/Day	Classification
AA500 - C, - OC[1] [2] [3] [4] [5] [6] [7] [8]	500	Class I
AA500T - C[1] [5] [9] [10]	500	Class I
AA500-35NR[11]	500	Class I
AA600 - C[1] [5] [12] [13]	600	Class I
AA750 - C, - OC[1] [5] [7] [14]	750	Class I
AA750T - C[1] [5] [9] [15]	750	Class I
AA800 - C[1] [5] [16] [17]	800	Class I
AA1000 - C[1] [5]	1000	Class I
AA1200 - C, - OC[1] [5] [6] [7] [18]	1200	Class I
AA1500 - C, - OC[1] [5] [7]	1500	Class I
AA1500T[5]	1500	Class I
AS500L[19] [20]	500	Class I
AS500L - C[19] [20]	500	Class I
AS500L - EZ[19] [21]	500	Class I
AS500 - F, C[1] [3] [20] [22] [23] [24]	500	Class I
AS600 - F, C[1] [22] [24] [25]	600	Class I
AS600+4NR w/EZ top[11] [26]	600	Class I
AS600L[19]	600	Class I
AS750 - F, C[1] [22] [24]	750	Class I
AS800 - F[22] [24]	800	Class I
AS800L[19]	800	Class I
AS1000 - F, C[1] [22] [24]	1000	Class I
AS1100L[19]	1100	Class I
AS1200 - F[22] [24]	1200	Class I
AS1500 - F, C[1] [22] [24]	1500	Class I
[1] Suffix C denotes concrete tank. [2] Model AA500 also as a component of the models AA500-35, AA500-3432, AA500-3530, AA500-3575, AA500-4050 and AA500-4075. Complete models AA500-35, AA500-3432, AA500-3530, AA500-3575, AA500-4050 and AA500-4075 have not been tested and Certified by NSF. Complete models: - AA500-35 includes a 350 gallon pretreatment tank. - AA500-35C includes a 350 gallon pretreatment tank. - AA500-3432 includes a 340 gallon pretreatment tank and a 320 gallon pump tank. - AA500-3575 includes a 350 gallon pretreatment tank and a 750 gallon pump tank. - AA500-3530 includes a 350 gallon pretreatment tank and a 300 gallon pump tank. - AA500-4050 includes a 400 gallon pretreatment tank and a 500 gallon pump tank. - AA500-4075 includes a 400 gallon pretreatment tank and a 750 gallon pump tank. [3] Average influent wastewater characteristics were outside the 30-day averages specified by NSF/ANSI Standard 40, but were within the average for the overall test, supporting that mass loading of the influent was adequate. The 30-day effluent values were 10 mg/L or less with no effluent values discarded despite the influent variability. [4] Model AA500 also as a component of the model AA500-4090. Complete model AA500-4090 has not been tested and Certified by NSF. Complete model AA500-4090 includes a 400 gallon pretreatment tank and a 900 gallon pump tank. [5] Suffix AA denotes Aqua Aire. [6] Models AA500-OC include a 370 gallon pump tank and AA1200-OC include a 500 gallon pump tank. Complete models have not been tested and Certified by NSF. [7] Suffix OC denotes Ontario, Canada models. [8] Aqua Aire Model AA520-35 and Model AA520-3230 have been approved for a rated daily capacity of 520 GPD in the State of Mississippi. These Models have not been tested and Certified by NSF. [9] Suffix T denotes two-piece tank. [10] Model AA500T also as a component of the model AA500-32 single tank system. Complete model AA500-32 has not been tested and Certified by NSF. Complete model AA500-32 includes a 325 gallon pretreatment tank. Complete model AA500T-3550 system integrates a 500 GPD treatment unit with a 350 gallon pump tank. [11] Suffix NR denotes nitrogen reduction. Models AS600+4NR w/EZ top, AA500-35NR, and AA500-35C NR complete models include a pretreatment tank. [12] Model AA600 also as a component of the model AA600-50 single tank system. Complete model AA600-50 has not been tested and Certified by NSF. Complete model AA600-50 includes a 500 gallon pretreatment tank. Complete model number AA600-4030 includes a 400 gallon pretreatment tank and a 300 gallon pump tank. [13] Model AA600 also as a component of the model AA600W-4075. Complete model AA600W-4075 has not been tested and Certified by NSF. Complete model AA600W-4075 includes a 400 gallon pretreatment tank and a 750 gallon pump tank. [14] Model AA750-4290 also as a component of AA750. Complete model AA750-4290 includes a 425 gallon pre-treatment tank and a 900 gallon pump tank. Complete models have not been tested and certified by NSF. [15] Complete model number AA750T-50 integrates a 750 GPD treatment unit with a 500 gallon pump tank. [16] Model AA800 also as a component of the model AA800-00110 with an effluent pump tank of 1096 gallons. The pump tank was not tested and is not included as a component of the Certified model. [17] Model AA800 also as a component of the model AA800-65 single tank system. Complete model AA800-65 has not been tested and Certified by NSF. Complete model AA800-65 includes a 660 gallon pretreatment tank. [18] Model AA1200 also as a component of the model AA1200-00160 with an effluent pump tank of 1625 gallons. The pump tank was not tested and is not included as a component of the Certified Model. [19] Suffix L denotes low profile tank. Model AS500L also as a component of the models AS500L-C- 4+75, AS500L-CU, AS600L-CU, AS500L-EZ CU, AS600L-EZ CU, AS500L P4CU, AS500L-EZ P4CU, AS500L-C +5 Pre Pump, AS600L, AS600L-EZ, AS600L-C, AS800L, AS800L-EZ, AS800L-C, AS1100L, AS1100L-EZ, and AS1100L-C. Complete models AS500L-C 4+75, AS500L-CU, AS600L-CU, AS500L-EZ CU, AS600L-EZ CU, AS500L P4CU, AS500L-EZ P4CU, AS500L-C +5 Pre, AS500L-C Pump, AS600L, AS600L-EZ, AS800L, AS800L-EZ, AS800L-C, AS1100L, AS1100L-EZ, and AS1100L-C have not been tested and Certified by NSF. Complete models: AS500L-C 4+75 includes a 400 gallon pretreatment tank and a 750 gallon pump tank. AS500L-CU includes a 68 gallon chlorine contact chamber. AS600L-CU includes a 68 gallon chlorine contact chamber. AS500L-EZ-CU includes a 68 gallon chlorine contact chamber. AS600L-EZ-CU includes a 68 gallon chlorine contact chamber. AS500L-P4CU includes a 400 gallon pretreatment tank and a 68 gallon chlorine contact chamber. AS500L-C +5 Pre includes a 500 gallon pretreatment tank. AS500L-C +5 Pump includes a 500 gallon pump tank. [20] Aqua Safe Model AS520, Model AS520 CU, Model AS520 + 3 Pump Duo, Model AS520L, Model AS520L + 3 Pump Duo, and Model AS520L CU have been approved for a rated daily capacity of 520 GPD in the State of Mississippi. These Models have not been tested and Certified by NSF. [21] Suffix EZ denotes that the system comes with a base and cover for the compressor that can be installed over the FG riser. [22] Suffix F denotes fiberglass tank. [23] Model AS500 also as a component of the complete models AS500-PRE, AS500-EZ, AS500-5PUMP, AS500-CU, AS500-P5CU, AS500-5+5, AS500-5+5E, AS500-4+75 and AS500-166. These complete models have not been tested and Certified by NSF. Complete models: - AS500-5PRE includes a 516 gallon pretreatment tank. - AS500-5PUMP includes a 500 gallon pump tank. - AS500-CU includes a 68 gallon chlorine contact tank. - AS500-P5CU includes a 516 gallon pretreatment tank and a 68 gallon chlorine contact tank. - AS500-4+75 includes a 400 gallon pretreatment tank and a 750 gallon pump tank. - AS500-5+5 includes a 516 gallon pretreatment tank and a 516 gallon pump tank. - AS500-5+5E includes a 516 gallon pretreatment tank and a 580 gallon elliptical pump tank. - AS500-5+75 includes a 516 gallon pretreatment tank and a 750 gallon pump tank. - AS500-166 includes a 166 gallon pump tank. [24] Suffix AS denotes Aqua Safe. [25] Model AS600 also as a component of the complete models AS600-166 and AS600-CU. Complete models have not been tested and Certified by NSF. Complete models: - AS600-CU includes a 68 gallon chlorine contact tank. - AS600-166 includes a 166 gallon pump tank. [26] Model AS600+4 NR also as a component of the models AS600 5+5 TRIO NR, AS600 5+75 TRIO NR, AS600 4+75-C NR, AS600+5-C NR, AS600 +5 CP NR, and AS600 +5 C CP NR have not been tested and Certified by NSF. Complete models: AS600 5+5 TRIO NR includes a 500 gallon pretreatment tank and a 500 gallon pump tank. AS600 5+75 TRIO NR includes a 500 gallon pretreatment tank and a 750 gallon pump tank. AS600 4+75-C NR includes a 400 gallon pretreatment tank and a 750 gallon pump tank. AS600 +5-C NR includes a 500 gallon pretreatment tank. AS600 +5 CP NR includes a 500 gallon detached pretreatment tank. AS600 +5 C CP NR includes a 500 gallon detached pretreatment tank.

NOTE: Only products bearing the NSF Mark on the product are Certified.
NOTE: This company may sell products complying with all applicable requirements for
      Certification nationally and internationally, but has advised NSF of authorized
      representatives physically located in the following:
      
      Alabama          Arkansas         British West Indies (Turks and Caicos Islands)
      California       Florida          Georgia          Hawaii           Illinois
      Iowa             Kansas           Louisiana        Mississippi      Missouri
      New Mexico       New York         Ohio             Oklahoma         Pennsylvania
      South Carolina   South Dakota     Texas            Virginia         West Virginia
      
      Contact the Listed company directly for further product information and availability in
      your area.

Eljen Corporation
90 Meadow Road
Windsor, CT 06095
United States
800-444-1359
860-610-0426

Facility : Windsor, CT

Model Number	Rated Capacity Gallons/Day	Classification
Eljen GSF Denitrification System
DN450	450	Class I
DN600	600	Class I
DN800	800	Class I
DN1000	1000	Class I
GSF Advanced Treatment (AT) Systems[1] [2] [3] [4] [5] [6]
LT-450	450	Class I
SP-450	450	Class I
LT-600	600	Class I
SP-600	600	Class I
LT-750	750	Class I
SP-750	750	Class I
LT-900	900	Class I
SP-900	900	Class I
LT-1050	1050	Class I
SP-1050	1050	Class I
LT-1200	1200	Class I
SP-1200	1200	Class I
LT-1350	1350	Class I
SP-1350	1350	Class I
LT-1500	1500	Class I
SP-1500	1500	Class I
[1] Prefix SP denotes combined or bottomless discharge. Prefix LT denotes single point discharge. [2] Table A, Minimum Sizing and Dimensions NSF 40 Class I Certified GSF Advanced Treatment (AT) Systems SP and LT Models Model Number Design Daily Minimum Minimum Units Flow Total Footprint Tank Size Required (ft2) (gal.) SP-450 & LT-450 450 225 1000 18 SP-600 & LT-600 600 297 1250 24 SP-750 & LT-750 750 369 1500 30 SP-900 & LT-900 900 441 2000 36 SP-1050 & LT-1050 1050 513 2250 42 SP-1200 & LT-1200 1200 585 2500 48 SP-1350 & LT-1350 1350 657 2750 54 SP-1500 & LT-1500 1500 729 3000 60 [3] Maximum loading rate of 3 gallons per square foot onto the Eljen GSF Media, while maintaining a maximum hydraulic loading to the underlying soil system as 2 gallons per square foot per day. The GSF Advanced Treatment (AT) Systems can be installed in a bed configuration with a minimum spacing along both sides of modules of 6 inches. A minimum of 6 inches of Specified Sand is placed at the beginning and end of each row. [4] Minimum requirement of 6 inches of system sand below the GSF Wastewater Treatment System. [5] While the GSF Advanced Treatment (AT) Systems includes design specifications similar to a dispersal field, the scope of the NSF/ANSI Standard 40 Class I Certification does NOT include management methods for the treated effluent discharged from the system. [6] The GSF Advanced Treatment (AT) Systems are approved with the modules A66 (6 inch height), A42 (7 inch height), and B43 (7 inch height, 36 inches wide).

Enviro-Flo Inc.
235 Flowood Drive
Flowood, MS 39232
United States
877-836-8476
877-836-8476

Facility : Flowood, MS

Model Number	Rated Capacity Gallons/Day	Classification
E-500[1]	500	Class I
E-500P[2]	500	Class I
E-550	550	Class I
E-600	600	Class I
E-750	750	Class I
E-1000	1000	Class I
E-1500	1500	Class I
E500F[3]	500	Class I
[1] Model E-500 also as a component of the one piece tank design models E5P35, E5P37, and E5P57. These complete models have not been tested by NSF. Complete models: - E5P35 includes a 302 gallon pretreatment and a 503 gallon pump chamber. - E5P37 includes a 302 gallon pretreatment and a 752 gallon pump chamber. - E5P57 includes a 503 gallon pretreatment and a 752 gallon pump chamber. [2] Suffix P denotes polyethylene tank. [3] Suffix F denotes fiberglass tank.

Fuji Clean USA, LLC
41-2 Greenwood Road
Brunswick, ME 04011
United States
207-406-2927

Facility : Thomson, GA

Model Number	Rated Capacity Gallons/Day	Classification
CE10	1000	Class I
CE14	1350	Class I
CE5	500	Class I
CE7	700	Class I
CEN10	1000	Class I
CEN14	1350	Class I
CEN5	500	Class I
CEN7	700	Class I

Facility : Brunswick, ME

Model Number	Rated Capacity Gallons/Day	Classification
CE5	500	Class I
CE7	700	Class I
CE10	1000	Class I
CE14	1350	Class I
CEN5	500	Class I
CEN7	700	Class I
CEN10	1000	Class I
CEN14	1350	Class I

Henry McGrew LLC
3822 East Texas
Bossier City, LA 71111
United States
318-746-2380

Facility : Bossier City, LA

Model Number	Rated Capacity Gallons/Day	Classification
500-T[1]	500	Class I
500-P300[2]	500	Class I
600-T[1]	600	Class I
750-T[1]	750	Class I
750-P500[3]	750	Class I
1000-T[1]	1000	Class I
JS 520 T[1]	520	Class I
JS 520 TP[1] [4]	520	Class I
JS 600 T[1]	600	Class I
JS 600 TP[1] [4]	600	Class I
JS 750 T[1]	750	Class I
JS 750 TP[1] [4]	750	Class I
JS 800 T[1]	800	Class I
JS 800 TP[1] [4]	800	Class I
JS 1000 T[1]	1000	Class I
JS 1000 T AA[1] [5]	1000	Class I
[1] Suffix T denotes a tapered wall tank. [2] JetSpray 500-p300 denotes a 300 gallon pump tank. Suffix p denotes pump tank. [3] JetSpray 750-p500 denotes a 500 gallon pump tank. Suffix p denotes pump tank. [4] Suffix P denotes a built on pump tank. [5] Suffix AA denotes a separate pretreatment.

Hoot Systems, LLC
2885 Highway 14 East
Lake Charles, LA 70607
United States
888-878-4668
337-474-2804
Visit this company's website

Facility : Lake Charles, LA

Model Number	Rated Capacity Gallons/Day	Classification
ANR-450	450	Class I
ANR-500	500	Class I
ANR-675	675	Class I
ANR-800	800	Class I
ANR-900	900	Class I
ANR-1100	1100	Class I
H-500A[1]	500	Class I
H500AFT[2]	500	Class I
H-600A[3]	600	Class I
H600AFT[2]	600	Class I
H-750A[4]	750	Class I
H-900A[5]	900	Class I
H-1000A[6]	1000	Class I
H-1200A[7]	1200	Class I
LA-500[8] [9]	500	Class I
LA-500B[8]	500	Class I
LA-500P[10]	500	Class I
LA-500S[8] [11]	500	Class I
LA-600	600	Class I
LA-850	850	Class I
LA-1000[12]	1000	Class I
LA-1000S[11] [12]	1000	Class I
LA-1000ALP[13]	1000	Class I
NR-600	600	Class I
[1] Model H-500A also as a component of the models H-500 AN/AW/AS/AT/AND/ASD/ATD. These complete models have not been tested by NSF. Complete models: H-500AN/AW/AND include a 760 gallon pump tank. H-500AS/AT/ASD/ATD include a 1010 gallon pump tank. [2] Suffix FT denotes fiberglass tank. [3] Model H-600A also as a component of the models H-600AN/AT/AND. These complete models have not been tested by NSF. Complete models H-600AN/AT/AND include a 1010 gallon pump tank. [4] Model H-750A also as a component of the models H-750AN/AW/AH/AND. These complete models have not been tested by NSF. Complete models H-750AN/AW/AH/AND include a 1700 gallon pump tank. [5] Model H-900A also as a component of the models H-900AN/AT/AND. These complete models have not been tested by NSF. Complete models H-900AN/AT/AND include a 1700 gallon pump tank. [6] Model H-1000A also as a component of the models H-1000AD/AN/AW/AND. These complete models have not been tested by NSF. Complete models H-1000 AD/AN/AW/AND include a 1469 gallon pump tank. [7] Model H-1200A also as a component of the models H-1200AN/AT/AND. These complete models have not been tested by NSF. Complete models H-1200AN/AT/AND include a 1469 gallon pump tank. [8] Models LA-500, LA-500S and LA-500B also have components of the models LA-500TP and LA-500TPS, respectively. These complete models have not been tested by NSF. Complete models: LA-500TP includes a pretreatment and pump tank. LA-500TPS denotes a straight walled tank with a pretreatment and pump tank. [9] Average influent wastewater characteristics were outside the 30-day averages specified by NSF/ANSI Standard 40, but were within the average for the overall test, supporting that mass loading of the influent was adequate. The 30-day effluent values were 10 mg/L or less with no effluent values discarded despite the influent variability. [10] Suffix P denotes PVC Tank [11] Suffix S denotes a straight walled, one piece tank with lid. [12] Models LA-1000 and LA-1000S also as components of the models LA-1000TP and LA-1000TPS respectively. These complete models have not been tested by NSF. Complete models: LA-1000TP includes a pretreatment and pump tank. LA-1000TPS denotes a straight walled tank with a pretreatment and pump tank. [13] Suffix ALP denotes alternative low profile.

NOTE: This company may sell products complying with all applicable requirements for
      Certification nationally and internationally, but has advised NSF of authorized
      representatives physically located in the following:
      
      Alabama         Arizona         California      Colorado        Delaware        Florida
      Illinois        Iowa            Kansas          Louisiana       Maine           Maryland
      Massachusetts   Minnesota       Mississippi     New Jersey      North Carolina  Ohio
      Oklahoma        Pennsylvania    Texas           Virginia        Washington     
      Wisconsin
      
      Contact the Listed company directly for further product information and availability in
      your area.

Hydro-Action Industries
1919 Jim Neu Drive
Plymouth, IN 46563
United States
800-370-3749
574-936-2542

Facility : Plymouth, IN

Model Number	Rated Capacity Gallons/Day	Classification
AN-400[1]	450	Class I
AN-500	550	Class I
AN-600	600	Class I
AN-600	660	Class I
AN-800	800	Class I
AN-1100	1100	Class I
AP-500[2] [3]	500	Class I
AP-600	600	Class I
AP-750	750	Class I
AP-1000G	1000	Class I
AP-1500G	1500	Class I
CLP-500	500	Class I
CLP-600	600	Class I
LP-500[4]	500	Class I
[1] Model AN-400 also as a component of the model AN-IVS. Complete model AN-IVS has not been tested by NSF. Complete model AN-IVS includes a pretreatment tank of 450 gallons and an aerobic treatment unit of 950 gallons [2] Model AP-500 also as a component of the model Set-N-Go. Complete model Set-N-Go has not been tested by NSF. Complete model Set-N-Go includes a pretreatment tank of either 250, 300, 375, 500, 625, or 750 gallons and a pump tank of either 250, 300, 375, 500, 625, or 750 gallons. [3] The audible portion of this product's failure sensing and signaling equipment was between 70 and 90 dBA at 1.5 meters. [4] Prefix LP denotes low profile.

NOTE: This company may sell products complying with all applicable requirements for
      Certification nationally and internationally, but has advised NSF of authorized
      representatives physically located in the following:
      
      California       Illinois       Indiana       Iowa       Michigan        North Carolina
      Ohio             West Virginia
      
      Contact the Listed company directly for further product information and availability in
      your area.

Infiltrator Water Technologies, LLC
4 Business Park
P.O. Box 768
Old Saybrook, CT 06475
United States
800-221-4436
860-577-7000
Visit this company's website

Facility : Salisbury, NC

Model Number	Rated Capacity Gallons/Day	Classification
ATL-1050[1]	1050	Class I
ATL-1200[1]	1200	Class I
ATL-1350[1]	1350	Class I
ATL-1500[1]	1500	Class I
ATL-450[1]	450	Class I
ATL-600[1]	600	Class I
ATL-750[1]	750	Class I
ATL-900[1]	900	Class I
[1] Only products bearing the NSF Mark on the product (alarm panel, aeration equipment, tank or riser) shipped with the product are certified.

Infiltrator Water Technologies, LLC (formerly Presby Environmental, Inc.)
4 Business Park Road
Old Saybrook, CT 06475
United States
800-473-5298
603-837-3826
Visit this company's website

Facility : Whitefield, NH

Model Number	Rated Capacity Gallons/Day	Classification
Advanced Enviro-Septic® Treatment System[1] [2] [3]
AES-CTD-450	450	Class I
AES-CTD-600	600	Class I
AES-CTD-750	750	Class I
AES-CTD-900	900	Class I
AES-CTD-1050	1050	Class I
AES-CTD-1200	1200	Class I
AES-CTD-1350	1350	Class I
AES-CTD-1500	1500	Class I
AES-SPD-450	450	Class I
AES-SPD-600	600	Class I
AES-SPD-750	750	Class I
AES-SPD-900	900	Class I
AES-SPD-1050	1050	Class I
AES-SPD-1200	1200	Class I
AES-SPD-1350	1350	Class I
AES-SPD-1500	1500	Class I
[1] Prefix CTD denotes combined or bottomless discharge. Prefix SPD denotes single point discharge. Prefix AES denotes Advanced Enviro-Septic®. Prefix SS denotes Simple Septic®. Prefix ES denotes Enviro-Septic®. [2] Table A, Minimum Sizing and Dimensions NSF 40 Class I Certified Advanced Enviro-Septic® Models, Simple Septic®, & Enviro-Septic® Models Model Number Design Daily Minimum Minimum Septic Septic Flow Total Pipe Tank Size Length (ft.) (gal.) XX-SPD 450 & XX-CTD 450 450 150 1000 XX-SPD 600 & XX-CTD 600 600 200 1200 XX-SPD 750 & XX-CTD 750 750 250 1500 XX-SPD 900 & XX-CTD 900 900 300 1800 XX-SPD 1050 & XX-CTD 1050 1050 350 2100 XX-SPD 1200 & XX-CTD 1200 1200 400 2400 XX-SPD 1350 & XX-CTD 1350 1350 450 2700 XX-SPD 1500 & XX-CTD 1500 1500 500 3000 Maximum loading of 3.0 gallons per linear foot of AES, SS or ES pipe. Minimum spacing of pipe rows – eighteen inches (18") on center (i.e. minimum one-half foot (6") of system sand between pipe rows). Note: All models include 6 in. of system sand below pipes for treatment. [3] While the Presby treatment system includes design specifications similar to a dispersal field, the scope of the NSF/ANSI Standard 40 Class I Certification does NOT include management methods for the treated effluent discharged from the system.
Simple Septic® Treatment System[1] [2] [3]
SS-SPD 450	450	Class I
SS-SPD 600	600	Class I
SS-SPD 750	750	Class I
SS-SPD 900	900	Class I
SS-SPD 1050	1050	Class I
SS-SPD 1200	1200	Class I
SS-SPD 1350	1350	Class I
SS-SPD 1500	1500	Class I
SS-CTD 450	450	Class I
SS-CTD 600	600	Class I
SS-CTD 750	750	Class I
SS-CTD 900	900	Class I
SS-CTD 1050	1050	Class I
SS-CTD 1200	1200	Class I
SS-CTD 1350	1350	Class I
SS-CTD 1500	1500	Class I
[1] Prefix CTD denotes combined or bottomless discharge. Prefix SPD denotes single point discharge. Prefix AES denotes Advanced Enviro-Septic®. Prefix SS denotes Simple Septic®. Prefix ES denotes Enviro-Septic®. [2] Table A, Minimum Sizing and Dimensions NSF 40 Class I Certified Advanced Enviro-Septic® Models, Simple Septic®, & Enviro-Septic® Models Model Number Design Daily Minimum Minimum Septic Septic Flow Total Pipe Tank Size Length (ft.) (gal.) XX-SPD 450 & XX-CTD 450 450 150 1000 XX-SPD 600 & XX-CTD 600 600 200 1200 XX-SPD 750 & XX-CTD 750 750 250 1500 XX-SPD 900 & XX-CTD 900 900 300 1800 XX-SPD 1050 & XX-CTD 1050 1050 350 2100 XX-SPD 1200 & XX-CTD 1200 1200 400 2400 XX-SPD 1350 & XX-CTD 1350 1350 450 2700 XX-SPD 1500 & XX-CTD 1500 1500 500 3000 Maximum loading of 3.0 gallons per linear foot of AES, SS or ES pipe. Minimum spacing of pipe rows – eighteen inches (18") on center (i.e. minimum one-half foot (6") of system sand between pipe rows). Note: All models include 6 in. of system sand below pipes for treatment. [3] While the Presby treatment system includes design specifications similar to a dispersal field, the scope of the NSF/ANSI Standard 40 Class I Certification does NOT include management methods for the treated effluent discharged from the system.
Enviro-Septic® Treatment System[1] [2] [3]
ES-CTD-450	450	Class I
ES-CTD-600	600	Class I
ES-CTD-750	750	Class I
ES-CTD-900	900	Class I
ES-CTD-1050	1050	Class I
ES-CTD-1200	1200	Class I
ES-CTD-1350	1350	Class I
ES-CTD-1500	1500	Class I
ES-SPD-450	450	Class I
ES-SPD-600	600	Class I
ES-SPD-750	750	Class I
ES-SPD-900	900	Class I
ES-SPD-1050	1050	Class I
ES-SPD-1200	1200	Class I
ES-SPD-1350	1350	Class I
ES-SPD-1500	1500	Class I
[1] Prefix CTD denotes combined or bottomless discharge. Prefix SPD denotes single point discharge. Prefix AES denotes Advanced Enviro-Septic®. Prefix SS denotes Simple Septic®. Prefix ES denotes Enviro-Septic®. [2] Table A, Minimum Sizing and Dimensions NSF 40 Class I Certified Advanced Enviro-Septic® Models, Simple Septic®, & Enviro-Septic® Models Model Number Design Daily Minimum Minimum Septic Septic Flow Total Pipe Tank Size Length (ft.) (gal.) XX-SPD 450 & XX-CTD 450 450 150 1000 XX-SPD 600 & XX-CTD 600 600 200 1200 XX-SPD 750 & XX-CTD 750 750 250 1500 XX-SPD 900 & XX-CTD 900 900 300 1800 XX-SPD 1050 & XX-CTD 1050 1050 350 2100 XX-SPD 1200 & XX-CTD 1200 1200 400 2400 XX-SPD 1350 & XX-CTD 1350 1350 450 2700 XX-SPD 1500 & XX-CTD 1500 1500 500 3000 Maximum loading of 3.0 gallons per linear foot of AES, SS or ES pipe. Minimum spacing of pipe rows – eighteen inches (18") on center (i.e. minimum one-half foot (6") of system sand between pipe rows). Note: All models include 6 in. of system sand below pipes for treatment. [3] While the Presby treatment system includes design specifications similar to a dispersal field, the scope of the NSF/ANSI Standard 40 Class I Certification does NOT include management methods for the treated effluent discharged from the system.

Infiltrator Water Technologies, LLC, (formerly Delta Treatment Systems, LLC)
4 Business Park Road
Old Saybrook, CT 06475
United States
225-665-6162
Visit this company's website

Facility : Walker, LA

Model Number	Rated Capacity Gallons/Day	Classification
Enviro-Aire Series
EA50	500	Class I
EA52.5	525	Class I
EA60	600	Class I
EA75	750	Class I
EA80-CA	800	Class I
ECOPOD Series[1]
E50-FF	500	Class I
E50FF01	500	Class I
E50FF02	500	Class I
E50-NCA	500	Class I
E50-N[2]	500	Class I
E60-FF	600	Class I
E60-NCA	600	Class I
E60-N[2]	600	Class I
E75-FF	750	Class I
E75-NCA	750	Class I
E75-N[2]	750	Class I
E100-FF	1000	Class I
E100-NCA	1000	Class I
E100-N - IM1530[3]	1000	Class I
E150-FF	1500	Class I
E150-NCA	1500	Class I
[1] Registered trade name is Whitewater. Suffix A denotes auxiliary model. Suffix C denotes concrete tank with fiberglass top. Suffix CA denotes concrete tank with flat concrete top. Suffix CC denotes concrete tank with raised concrete top. Suffix F denotes fiberglass tank and top. Suffix FF denotes flanged fiberglass tank and top. Suffix FT denotes fiberglass tapered tank with fiberglass top. Suffix FFT denotes flanged fiberglass tapered tank with fiberglass top. Suffix CA3 denotes an integral 3-compartment concrete tank with flat concrete top. Suffix FF3 denotes a 3-compartment fiber glass tank. [2] The use of the Infiltrator IM1060 and CM1060 polypropylene tanks are approved with the E50-N, E60-N and E75-N models. [3] Suffix IM1530 denotes polypropylene tank.
DF Series
DF40-C,F,CC,CA,FF,FT,FFT[1] [4]	400	Class I
DF50-C,F,CC,CA,CA3,FF,FT,FFT[1] [4] [5]	500	Class I
DF50A-C,F,CC,CA,FF,FT,FFT,FF3[1] [4] [6]	500	Class I
DF60-C,F,CC,CA,FF,FT,FFT[1] [4]	600	Class I
DF75-C,F,CC,CA,FF[1] [4]	750	Class I
DF100-C,F,CC,CA,FF[1] [4]	1000	Class I
DF100A-C,F,CC,CA,FF[1] [4]	1000	Class I
DF100B-C,F,CC,CA,FF[1] [4]	1000	Class I
DF150-C,F,CC,CA,FF[1] [4]	1500	Class I
[1] Registered trade name is Whitewater. Suffix A denotes auxiliary model. Suffix C denotes concrete tank with fiberglass top. Suffix CA denotes concrete tank with flat concrete top. Suffix CC denotes concrete tank with raised concrete top. Suffix F denotes fiberglass tank and top. Suffix FF denotes flanged fiberglass tank and top. Suffix FT denotes fiberglass tapered tank with fiberglass top. Suffix FFT denotes flanged fiberglass tapered tank with fiberglass top. Suffix CA3 denotes an integral 3-compartment concrete tank with flat concrete top. Suffix FF3 denotes a 3-compartment fiber glass tank. [4] The audible portion of this product's failure sensing and signaling equipment was between 70 and 90 dBA at 1.5 meters. [5] Model DF50 also as a component of the Model CA3. Model UC50 also as a component of the model CA3. Complete models. DF50-CA3 and UC50-CA3 have not been tested by NSF. The complete models DF50-CA3 and UC50-CA3 have a pretreatment tank of either 500 or 750 gallons and a pump tank of 500, 750 or 1000 gallons. [6] Model DF50A also as a component of the model FF3. Complete models DF50A-FF3 has not been tested by NSF. The complete model DF50A-FF3 has a gallon pretreatment tank and a 750 gallon pump tank.
UC Series
UC50-F,CA,CA3,FF[1] [5]	500	Class I
UC50A-CA,FF[1]	500	Class I
UC60-CA,FF[1]	600	Class I
UC60A-FF,CA[1]	600	Class I
UC75A-CA,FF[1]	750	Class I
UC90-F,CA,FF[1]	900	Class I
UC100A-CA,FF[1]	1000	Class I
UC120-F,CA,FF[1]	1200	Class I
UC150-CA,FF[1]	1500	Class I
UC150A-CA,FF[1]	1500	Class I
[1] Registered trade name is Whitewater. Suffix A denotes auxiliary model. Suffix C denotes concrete tank with fiberglass top. Suffix CA denotes concrete tank with flat concrete top. Suffix CC denotes concrete tank with raised concrete top. Suffix F denotes fiberglass tank and top. Suffix FF denotes flanged fiberglass tank and top. Suffix FT denotes fiberglass tapered tank with fiberglass top. Suffix FFT denotes flanged fiberglass tapered tank with fiberglass top. Suffix CA3 denotes an integral 3-compartment concrete tank with flat concrete top. Suffix FF3 denotes a 3-compartment fiber glass tank. [5] Model DF50 also as a component of the Model CA3. Model UC50 also as a component of the model CA3. Complete models. DF50-CA3 and UC50-CA3 have not been tested by NSF. The complete models DF50-CA3 and UC50-CA3 have a pretreatment tank of either 500 or 750 gallons and a pump tank of 500, 750 or 1000 gallons.

NOTE: This company may sell products complying with all applicable requirements for
      Certification nationally and internationally, but has advised NSF of authorized
      representatives physically located in the following:
      
      Alabama          Alaska           Arizona          British Columbia British West Indies
      California       Colorado         Florida          Georgia          Hawaii
      Idaho            Illinois         Indiana          Iowa             Kentucky
      Louisiana        Maine            Maryland         Michigan         Minnesota
      Mississippi      Missouri         Montana          Nevada           New Mexico
      New York         North Carolina   Ohio             Ontario          Oklahoma
      Oregon           Tennessee        Texas            Utah             Virginia
      Washington       West Virginia    Wisconsin           
      
      Contact the Listed company directly for further product information and availability in
      your area.

Jet, Inc.
750 Alpha Drive
Cleveland, OH 44143
United States
440-461-2000
Visit this company's website

Facility : Cleveland, OH

Model Number	Rated Capacity Gallons/Day	Classification
J-500[1] [2]	500	Class I
J-500PLT[3]	500	Class I
J-600	600	Class I
J-750[4]	750	Class I
J-750PLT[3]	750	Class I
J-800[5]	800	Class I
J-800PLT[3]	800	Class I
J-1000	1000	Class I
J-1250	1250	Class I
J-1500	1500	Class I
[1] Model J-500 also as a component of the model J-500-P500. This complete model has not been tested by NSF. Complete model J-500-P500 includes a 500 gallon pump tank. [2] Model J-500 also as a component of the model J-500-P750. This complete model has not been tested by NSF. Complete model J-500-P750 includes a 750 gallon pump tank. [3] Suffix PLT denotes plastic tank design. [4] Model J-500 also as a component of the model J-750-P750. This complete model has not been tested by NSF. Complete model J-750-P750 includes a 750 gallon pump tank. [5] Model J-800 also as a component of the model J-800-P550 and J-800-P800. These complete models have not been tested by NSF. Complete model J-800-P550 includes a 550 gallon pump tank and J-800-P800 includes a 800 gallon pump tank.

NOTE: This company may sell products complying with all applicable requirements for
      Certification nationally and internationally, but has advised NSF of authorized
      representatives physically located in the following:
      
      Alaska           Arizona          Arkansas         California       Colorado
      Florida          Idaho            Illinois         Iowa             Indiana
      Mississippi      Missouri         Montana          New Jersey       New York
      Ohio             Pennsylvania     Texas            Virginia         Washington
      West Virginia    Wisconsin        Wyoming
      
      Contact the Listed company directly for further product information and availability in
      your area.

Microseptec
23362 Madero
Suite C
Mission Viejo, CA 92691
United States
949-297-4590
Visit this company's website

Facility : Mission Viejo, CA

Model Number	Rated Capacity Gallons/Day	Classification
EnviroServer ENFG 600	600	Class I
EnviroServer ES6-AP[1]	600	Class I
EnviroServer ES6-P[2]	600	Class I
EnviroServer ENFG 1200	1200	Class I
EnviroServer ES12-AP[1]	1200	Class I
EnviroServer ES12-P[2]	1200	Class I
EnviroServer ENFG 1500	1500	Class I
EnviroServer ES7.5-AP[1]	750	Class I
EnviroServer ES7.5-P[2]	750	Class I
EnviroServer ES9-AP[1]	900	Class I
EnviroServer ES9-P[2]	900	Class I
EnviroServer ES10.5-AP[1]	1050	Class I
EnviroServer ES10.5-P[2]	1050	Class I
EnviroServer ES13.5-AP[1]	1350	Class I
EnviroServer ES13.5-P[2]	1350	Class I
EnviroServer ES15-AP[1]	1500	Class I
EnviroServer ES15-P[2]	1500	Class I
[1] Suffix AP denotes airlift pump. [2] Suffix P denotes pump.

National Wastewater Systems, Inc.
6754 Highway 90 East
Lake Charles, LA 70615
United States
337-439-0680

Facility : Lake Charles, LA

Model Number	Rated Capacity Gallons/Day	Classification
SA II-1000	1000	Class I
SA II-500[2] [3]	500	Class I
SA II-600[1] [7]	600	Class I
SA II-750	750	Class I
SA II-800	800	Class I
Solar Air 1000	1000	Class I
Solar Air 1200	1200	Class I
Solar Air 500[4]	500	Class I
Solar Air 500FRP[5] [6]	500	Class I
Solar Air 800	800	Class I
[1] Model SA II-600 also as a component of the model SA II N-600 single tank system. Complete model SA II N-600 includes a 850 gallon pump tank in addition to the SA II-600. The pump tank was not tested and is not included as a component of the Certified model. [2] Model SA II-500 also as a component of the model SA II N-500 single tank system. Complete model SA II N-500 includes a 768 gallon pump tank in addition to the SA II-500. The pump tank was not tested and is not included as a component of the Certified model. [3] Model SA II 500 also as a component of the model SA II 500FRP, a fiberglass single tank system with an effluent pump tank. The pump tank was not tested and is not included as a component of the Certified Model. [4] Model Solar Air 500 also as a component of the Model SATXN-500 single tank system. Complete Model SATXN-500 includes a lift/pump tank in addition to the Solar Air 500. The lift/pump tank was not tested and is not included as a component of the Certified Model. [5] Model SA 500FRP also as a component of the SA 500FRP single tank system with effluent pump tank. The pump tank was not tested and is not included as a component of the Certified model. [6] Suffix FRP denotes a fiberglass reinforced plastic tank. [7] Model SA II-600 also as a component of the SA II-600 1000 spray, a single tank system with a 1000 gallon spray sewer unit. The spray tank was not tested and is not included as a component of the Certified model.

NOTE: This company may sell products complying with all applicable requirements for
      Certification nationally and internationally, but has advised NSF of authorized
      representatives physically located in the following:
      
      Georgia          Illinois         Louisiana        Mississippi      Missouri
      Oklahoma         Texas
      
      Contact the Listed company directly for further product information and availability in
      your area.

Norweco, Inc.
Firelands Industrial Park
220 Republic Street
Norwalk, OH 44857
United States
419-668-4471
Visit this company's website

Facility : Norwalk, OH

Model Number	Rated Capacity Gallons/Day	Classification
Hydro-Kinetic 600	500	Class I
Hydro-Kinetic 600[1]	600	Class I
Hydro-Kinetic 600 FEU	500	Class I
Hydro-Kinetic Green 600 FEU	600	Class I
Hydro-Kinetic 600 FEU	600	Class I
Hydro-Kinetic 600 FEU LP[2]	500	Class I
Hydro-Kinetic 600 FEU LP[2]	600	Class I
Hydro-Kinetic 600 LP[2]	500	Class I
Hydro-Kinetic 600 LP[2]	600	Class I
Hydro-Kinetic 750 LP[2]	750	Class I
Hydro-Kinetic 800	800	Class I
Hydro-Kinetic 800 FEU	800	Class I
Hydro-Kinetic 1000	1000	Class I
Hydro-Kinetic 1000 FEU	1000	Class I
Hydro-Kinetic 1000 LP[2]	1000	Class I
Hydro-Kinetic 1250	1250	Class I
Hydro-Kinetic 1250 FEU	1250	Class I
Hydro-Kinetic 1250 LP[2]	1250	Class I
Hydro-Kinetic 1500	1500	Class I
Hydro-Kinetic 1500 FEU	1500	Class I
Hydro-Kinetic 1500 LP[2]	1500	Class I
Singulair 950-600GPD System	600	Class I
Singulair 950-750GPD System	750	Class I
Singulair 950-1000GPD System	1000	Class I
Singulair 950-1250GPD System	1250	Class I
Singulair 950-1500GPD System	1500	Class I
Singulair 960-500GPD System[3]	500	Class I
Singulair 960-500GPD System	600	Class I
Singulair 960-750GPD System	750	Class I
Singulair 960-750GPD System	800	Class I
Singulair 960-1000GPD System	1000	Class I
Singulair 960-1250GPD System	1250	Class I
Singulair 960-1500GPD System	1500	Class I
Singulair 960LP-500[2]	500	Class I
Singulair 960LP-500[2]	600	Class I
Singulair 960LP-750[2]	750	Class I
Singulair 960LP-1000[2]	1000	Class I
Singulair 960LP-1250[2]	1250	Class I
Singulair 960LP-1500[2]	1500	Class I
Singulair 960OP-500GPD System[4]	500	Class I
Singulair 960OP-500GPD System[4]	600	Class I
Singulair 960OP-1000GPD System[5]	1000	Class I
Singulair Green 960-500 System	500	Class I
Singulair Green 960-750	750	Class I
Singulair Green 960-500 System	600	Class I
Singulair Green TNT-500	500	Class I
Singulair Green TNT-500	600	Class I
Singulair Green TNT-750	750	Class I
Singulair TNT-500	500	Class I
Singulair TNT-500	600	Class I
Singulair TNT-750	750	Class I
Singulair TNT-750	800	Class I
Singulair TNT-1000	1000	Class I
Singulair TNT-1250	1250	Class I
Singulair TNT-1500	1500	Class I
Singulair TNTLP-500[2]	500	Class I
Singulair TNTLP-500[2]	600	Class I
Singulair TNTLP-750[2]	750	Class I
Singulair TNTLP-1000[2]	1000	Class I
Singulair TNTLP-1250[2]	1250	Class I
Singulair TNTLP-1500[2]	1500	Class I
Singulair TNTOP-500[6]	500	Class I
Singulair TNTOP-500[6]	600	Class I
Singulair TNTOP-1000[6]	1000	Class I
Singulair TNTOR-500[7]	500	Class I
Singulair TNTOR-600[7]	600	Class I
[1] Hydro-Kinetic 600 gpd system requires a minimum pretreatment tank size of 388 gallons. [2] Suffix LP denotes a low profile tank. [3] Singulair 960-500GPD System also a component of the Singulair Model 960-500 GPD with Effluent Pump Chamber. The pump chamber was not tested and is not included as a component of the Certified Model. [4] Singulair Model 9600P-500 with a rated capacity of 500 and 600 gallons per day is also a component of the Singulair Model 9600P-500 with effluent pump chamber. The pump chamber was not tested and is not included as a component of the Certified model. [5] Singulair Model 9600P-1000 with a rated capacity of 1000 gallons per day is also a component of the Singulair Model 9600P-1000 with effluent pump chamber. The pump chamber was not tested and is not included as a component of the Certified model. [6] Suffix OP denotes a one piece tank. [7] Suffix OR denotes Oregon model.

NOTE: This company may sell products complying with all applicable requirements for
      Certification nationally and internationally, but has advised NSF of authorized
      representatives physically located in the following:
      
      Alberta          Arkansas         Arizona          British Columbia California
      Colorado         Florida          Georgia          Idaho            Illinois
      Indiana          Iowa             Kansas           Kentucky         Louisiana
      Maryland         Michigan         Minnesota        Mississippi      Missouri
      Montana          New Brunswick    New Jersey       New York         North Carolina
      Ohio             Oklahoma         Ontario          Pennsylvania     Rhode Island
      Texas            Vermont          Virginia         Washington       West Virginia
      Wisconsin              
      
      Contact the Listed Company directly for further product information and availability in
      your area.

Orenco Systems Inc.
814 Airway Avenue
Sutherlin, OR 97479
United States
800-348-9843
541-459-4449
Visit this company's website

Facility : Sutherlin, OR

Model Number	Rated Capacity Gallons/Day	Classification
AdvanTex AX20	500	Class I
AdvanTex AX20RT	500	Class I
AdvanTex AX20RT-UV	500	Class I
AdvanTex AX20	600	Class I
AdvanTex AX20RT	600	Class I
AdvanTex AX20RT-UV	600	Class I
AdvanTex AX25RT	625	Class I
AdvanTex AX25RT-UV	625	Class I
AdvanTex AX25RT	750	Class I
AdvanTex AX25RT-UV	750	Class I
AdvanTex AX20	1000	Class I
AdvanTex AX20RT	1000	Class I
AdvanTex AX20-2	1000	Class I
AdvanTex AX20	1200	Class I
AdvanTex AX20RT 2 pod	1200	Class I
AdvanTex AX25RT 2 pod	1250	Class I
AdvanTex AX20	1500	Class I
AdvanTex AX20RT 3 pod	1500	Class I
AdvanTex AX20-3	1500	Class I
AdvanTex AX25RT 2 pod	1500	Class I

NOTE: This company may sell products complying with all applicable requirements for
      Certification nationally and internationally, but has advised NSF of authorized
      representatives physically located in the following:
      
      California       Georgia          Idaho            New Jersey       Ohio
      Oregon           Pennsylvania     Texas
      
      Contact the Listed company directly for further product information and availability in
      your area.

Planet Care Inc.
4102 Bob White Boulevard
Pulaski, VA 24301
United States
540-731-0207
Visit this company's website

Facility : Pulaski, VA

Model Number	Rated Capacity Gallons/Day	Classification
Planet Care Coir/Peat Biofilter
FXC/PBF 450	450	Class I
Planet Care Coir/Peat Biofilter[1]
FXC/PBFC450	450	Class I
FXC/PBFC600	600	Class I
FXC/PBFC750	750	Class I
FXC/PBFC900	900	Class I
[1] Suffix C denotes concrete tank.
Planet Care Peat Biofilter
FL400	400	Class I
FLC450	450	Class I
FLC600	600	Class I
FLC750	750	Class I
FLC900	900	Class I

Premier Tech Water and Environment Ltd.
1 avenue Premier
Rivière-du-Loup, QC G5R 6C1
Canada
450-471-8444
Visit this company's website

Facility : Joliette, Québec, Canada

Model Number	Rated Capacity Gallons/Day	Classification
Ecoflo Coco Model Series Concrete Units (C)[1] [2] [3] [4] [5]
Ecoflo Coco EC5 ECC-XXX-O/G/P	450	Class I
Ecoflo Coco EC5 ECC-XXX-O/G/P	500	Class I
Ecoflo Coco EC5 ECC-XXX-O/G/P	530	Class I
Ecoflo Coco EC5 ECC-XXX-O/G/P	600	Class I
Ecoflo Coco EC5 ECC-XXX-O/G/P	650	Class I
Ecoflo Coco EC5 ECC-XXX-O/G/P	860	Class I
Ecoflo Coco EC7 EC7-XXX C-O/G/P	500	Class I
Ecoflo Coco EC7 EC7-XXX C-O/G/P	600	Class I
Ecoflo Coco EC7 EC7-XXX C-O/G/P	700	Class I
Ecoflo Coco EC7 EC7-XXX C-O/G/P	750	Class I
Ecoflo Coco EC7 EC7-XXX C-O/G/P	800	Class I
Ecoflo Coco EC7 EC7-XXX C-O/G/P	925	Class I
Ecoflo Coco EC7 EC7-XXX C-O/G/P	1200	Class I
[1] Suffix XXX denotes the rated capacity. [2] Suffix G denotes Gravity discharge. [3] Concrete Units (C) Ecoflo Units - Size 2.8 3.4 3.8 4.0 4.5 5.0 6.5 Rated Capacity (gpd) Ecoflo ST/STB STB-yyy-B/BR 420 600 Ecoflo Coco EC5 ECC-XXX-O/G/P 450 500 530 600 650 860 Ecoflo Coco EC7 EC7-XXX C-O/G/P 500 600 700 750 800 925 1200 Ecoflo Coco ECDN ECDn-XXX C 500 600 600 700 750 1000 [4] Prefix and suffix C denotes a concrete vessel. [5] Suffix P: for EC5 and EC7 or R denote Pump discharge.
Ecoflo Coco Model Series Polyethylene Units (P)[1] [2] [5] [6] [7] [8] [9]
Ecoflo Coco EC5 ECP-XXX-O/G/P (pack)*	450	Class I
Ecoflo Coco EC5 ECP-XXX-O/G/P (pack)*	530	Class I
Ecoflo Coco EC5 ECP-XXX-O/G/P (pack)*	750	Class I
Ecoflo Coco EC5 ECP-XXX-O/G/P (pack)*	860	Class I
Ecoflo Coco EC5 ECP-XXX-O/G/P (pack)*	970	Class I
EcoFlo Coco EC7-XXX P-O/G/P (pack)*	500	Class I
EcoFlo Coco EC7-XXX P-O/G/P (pack)*	600	Class I
EcoFlo Coco EC7-XXX P-O/G/P (pack)*	750	Class I
EcoFlo Coco EC7-XXX P-O/G/P (pack)*	1050	Class I
EcoFlo Coco EC7-XXX P-O/G/P (pack)*	1200	Class I
EcoFlo Coco EC7-XXX P-O/G/P (pack)*	1350	Class I
[1] Suffix XXX denotes the rated capacity. [2] Suffix G denotes Gravity discharge. [5] Suffix P: for EC5 and EC7 or R denote Pump discharge. [6] Prefix P denotes for EC5 a polyethylene vessel. [7] Suffix P denotes a polyethylene vessel. [8] pack - Monobloc configuration. Available only for 2.8, 3.4 and 4.1 Ecoflo Coco units. [9] Polyethylene Units (P) Ecoflo Units - Size 2.8 3.4 4.1 5.7 6.5 7.3 Rated Capacity (gpd) Ecoflo ST/STB ST/STB-yyy-P/PR 530 600 675 Ecoflo Coco EC5 ECP-XXX-O/G/P (pack) 450 530 750 860 970 Ecoflo Coco EC7 EC7-XXX P-O/G/P (pack)* 500 600 750 1050 1200 1350 Ecoflo Coco ECDN ECDn-XXX P 500 600 865 1000 1100
Ecoflo Coco ECDN Model Series Concrete Units (C)[1] [3] [4]
Ecoflo Coco ECDn-XXX C	500	Class I
Ecoflo Coco ECDn-XXX C	600	Class I
Ecoflo Coco ECDn-XXX C	600	Class I
Ecoflo Coco ECDn-XXX C	700	Class I
Ecoflo Coco ECDn-XXX C	750	Class I
Ecoflo Coco ECDn-XXX C	1000	Class I
[1] Suffix XXX denotes the rated capacity. [3] Concrete Units (C) Ecoflo Units - Size 2.8 3.4 3.8 4.0 4.5 5.0 6.5 Rated Capacity (gpd) Ecoflo ST/STB STB-yyy-B/BR 420 600 Ecoflo Coco EC5 ECC-XXX-O/G/P 450 500 530 600 650 860 Ecoflo Coco EC7 EC7-XXX C-O/G/P 500 600 700 750 800 925 1200 Ecoflo Coco ECDN ECDn-XXX C 500 600 600 700 750 1000 [4] Prefix and suffix C denotes a concrete vessel.
Ecoflo Coco ECDN Model Series Polyethylene Units (P)[1] [7] [9]
Ecoflo Coco ECDn-XXX P	500	Class I
Ecoflo Coco ECDn-XXX P	600	Class I
Ecoflo Coco ECDn-XXX P	865	Class I
Ecoflo Coco ECDn-XXX P	1000	Class I
Ecoflo Coco ECDn-XXX P	1100	Class I
[1] Suffix XXX denotes the rated capacity. [7] Suffix P denotes a polyethylene vessel. [9] Polyethylene Units (P) Ecoflo Units - Size 2.8 3.4 4.1 5.7 6.5 7.3 Rated Capacity (gpd) Ecoflo ST/STB ST/STB-yyy-P/PR 530 600 675 Ecoflo Coco EC5 ECP-XXX-O/G/P (pack)* 450 530 750 860 970 Ecoflo Coco EC7 EC7-XXX P-O/G/P (pack)* 500 600 750 1050 1200 1350 Ecoflo Coco ECDN ECDn-XXX P 500 600 865 1000 1100
Ecoflo Coco Model Series Fiberglass Units[1] [10] [11] [12]
Ecoflo Coco EC5 ECF-XXX-O	650	Class I
Ecoflo Coco EC5 ECF-XXX-O	860	Class I
Ecoflo Coco EC5 ECF-XXX-O	1000	Class I
Ecoflo Coco EC7 EC7-XXX F	925	Class I
Ecoflo Coco EC7 EC7-XXX F	1200	Class I
Ecoflo Coco EC7 EC7-XXX F	1400	Class I
[1] Suffix XXX denotes the rated capacity. [10] Prefix and Suffix F denotes a fiberglass vessel. [11] Fiberglass Units (F) Ecoflo Units - Size 5.0 6.5 7.5 Rated Capacity (gpd) Ecoflo ST/STB ST-yyy 420 600 695 Ecoflo Coco EC5 ECF-XXX-O 650 860 1000 Ecoflo Coco EC7 EC7-XXX F 925 1200 1400 [12] Prefix ST or Suffix O denotes Open bottom systems.
Ecoflo ST Model Series Fiberglass Units[11] [12] [13]
EcoFlo ST-yyy	420	Class I
EcoFlo ST-yyy	600	Class I
EcoFlo ST-yyy	695	Class I
[11] Fiberglass Units (F) Ecoflo Units - Size 5.0 6.5 7.5 Rated Capacity (gpd) Ecoflo ST/STB ST-yyy 420 600 695 Ecoflo Coco EC5 ECF-XXX-O 650 860 1000 Ecoflo Coco EC7 EC7-XXX F 925 1200 1400 [12] Prefix ST or Suffix O denotes Open bottom systems. [13] Suffix yyy relates to the Ecoflo size (in 3 digit format without decimal).
Ecoflo ST/STB Model Series Concrete Units (C)[13] [14] [15]
Ecoflo STB-yyy-B/BR	420	Class I
Ecoflo STB-yyy-B/BR	600	Class I
[13] Suffix yyy relates to the Ecoflo size (in 3 digit format without decimal). [14] Prefix STB denotes close bottom, gravity discharge. [15] Suffix B denotes also a concrete vessel.
Ecoflo ST/STB Model Series Polyethylene Units (P)[5] [7] [9] [12] [13] [14]
Ecoflo ST/STB-yyy-P/PR	675	Class I
Ecoflo ST/STB-yyy-P/PR	600	Class I
Ecoflo ST/STB-yyy-P/PR	530	Class I
[5] Suffix P: for EC5 and EC7 or R denote Pump discharge. [7] Suffix P denotes a polyethylene vessel. [9] Polyethylene Units (P) Ecoflo Units - Size 2.8 3.4 4.1 5.7 6.5 7.3 Rated Capacity (gpd) Ecoflo ST/STB ST/STB-yyy-P/PR 530 600 675 Ecoflo Coco EC5 ECP-XXX-O/G/P (pack)* 450 530 750 860 970 Ecoflo Coco EC7 EC7-XXX P-O/G/P (pack)* 500 600 750 1050 1200 1350 Ecoflo Coco ECDN ECDn-XXX P 500 600 865 1000 1100 [12] Prefix ST or Suffix O denotes Open bottom systems. [13] Suffix yyy relates to the Ecoflo size (in 3 digit format without decimal). [14] Prefix STB denotes close bottom, gravity discharge.
Ecoflo® Linear Biofilter Model Series [16] [17] [18] [19] [20]
EL15-022-YY	580	Class I
EL15-029-YY	770	Class I
EL15-054-YY	1430	Class I
EL15-016-YY	420	Class I
EL15-030-YY	790	Class I
EL15-018-YY	480	Class I
EL15-032-YY	840	Class I
EL15-044-YY	1160	Class I
EL15-051-YY	1350	Class I
EL15-028-YY	740	Class I
EL15-048-YY	1270	Class I
EL15-040-YY	1060	Class I
EL15-019-YY	500	Class I
EL15-053-YY	1400	Class I
EL15-043-YY	1130	Class I
EL15-020-YY	530	Class I
EL15-042-YY	1100	Class I
EL15-021-YY	550	Class I
EL15-034-YY	900	Class I
EL15-055-YY	1450	Class I
EL15-045-YY	1190	Class I
EL15-023-YY	610	Class I
EL15-057-YY	1500	Class I
EL15-046-YY	1210	Class I
EL15-036-YY	950	Class I
EL15-047-YY	1240	Class I
EL15-025-YY	660	Class I
EL15-015-YY	400	Class I
EL15-038-YY	1000	Class I
EL15-049-YY	1290	Class I
EL15-017-YY	450	Class I
EL15-037-YY	980	Class I
EL15-024-YY	630	Class I
EL15-056-YY	1480	Class I
EL15-050-YY	1320	Class I
EL15-031-YY	820	Class I
EL15-039-YY	1030	Class I
EL15-026-YY	690	Class I
EL15-027-YY	710	Class I
EL15-033-YY	870	Class I
EL15-035-YY	920	Class I
EL15-052-YY	1370	Class I
EL15-041-YY	1080	Class I
[16] Suffix YY refers to combined treatment and dispersal (CD) or single point discharge (SD). For trade name EL15-XXX-YY, the XXX indicates the number of modules in the system. [17] Minimum requirement of 6 inches of sand below the Ecoflo Linear Biofilter. These products are approved for use with sand media that conforms to the following specifications: D10: 0.150 to 0.600 mm (Mesh 100 to 30) D60: 0.500 to 2.000 mm (Mesh 35 to 10) Uc: 2-6 Less than 5% fines (<0.075 mm – Mesh 200) Less than 20% coarse (>4.760 mm – Mesh 4) [18] Table A, Minimum Sizing and Dimensions NSF 40 Class I Certified Ecoflo® Linear Biofilter EL15 Model Series Model Rated Capacity Minimum Tank Size (gallons per day) (gallon) EL15-015-YY 400 750 EL15-016-YY 420 790 EL15-017-YY 450 840 EL15-018-YY 480 900 EL15-019-YY 500 940 EL15-020-YY 530 990 EL15-021-YY 550 1030 EL15-022-YY 580 1090 EL15-023-YY 610 1140 EL15-024-YY 630 1180 EL15-025-YY 660 1240 EL15-026-YY 690 1290 EL15-027-YY 710 1330 EL15-028-YY 740 1390 EL15-029-YY 770 1440 EL15-030-YY 790 1480 EL15-031-YY 820 1540 EL15-032-YY 840 1580 EL15-033-YY 870 1630 EL15-034-YY 900 1690 EL15-035-YY 920 1730 EL15-036-YY 950 1780 EL15-037-YY 980 1840 EL15-038-YY 1000 1880 EL15-039-YY 1030 1930 EL15-040-YY 1060 1990 EL15-041-YY 1080 2030 EL15-042-YY 1100 2080 EL15-043-YY 1130 2120 EL15-044-YY 1160 2180 EL15-045-YY 1190 2230 EL15-046-YY 1210 2270 EL15-047-YY 1240 2330 EL15-048-YY 1270 2380 EL15-049-YY 1290 2420 EL15-050-YY 1320 2480 EL15-051-YY 1350 2530 EL15-052-YY 1370 2570 EL15-053-YY 1400 2630 EL15-054-YY 1430 2680 EL15-055-YY 1450 2720 EL15-056-YY 1480 2780 EL15-057-YY 1500 2810 [19] The Ecoflo Linear Biofilter EL15 Series can be installed in a bed or trench configurations. The sand layer's minimal height shall be 6 inches. A trench configuration requires a minimum width of 34 inches. [20] Certified for use with a septic/primary tank, an effluent filter, a distribution box, and a Polylock Filter Alarm System.

NOTE: Only products bearing the NSF Mark on the product are Certified.

Pro Flo Aerobic Systems, LP
20222 FM 362 North
Waller, TX 77484
United States
936-372-5222
Visit this company's website

Facility : Waller, TX

Model Number	Rated Capacity Gallons/Day	Classification
Flow-Rite 500	500	Class I
Pro Flo 500 HC[1] [2]	500	Class I
Pro Flo 500 SL[3]	500	Class I
Pro Flo 500 SL2[4]	500	Class I
Pro Flo 500 SLPT2M[5]	500	Class I
Pro Flo 500 SLPT8[6]	500	Class I
Pro Flo 500 TL[7]	500	Class I
Pro Flo 5060 HC[8]	600	Class I
Pro Flo 500 HC	500	Class I
Pro Flo 600 HC[1] [9]	600	Class I
Pro Flo 600 SL[10] [11]	600	Class I
Flow-Rite 750	750	Class I
Pro Flo 750 PTSL	750	Class I
Pro Flo 750 PTSL2M	750	Class I
Pro Flo 750 SL	750	Class I
Pro Flo 750 SL2	750	Class I
Pro Flo 750 TL	750	Class I
Pro Flo 800 HC[1] [12]	800	Class I
Pro Flo 800 PTSL	800	Class I
Pro Flo 800 SL	800	Class I
Flow-Rite 1000	1000	Class I
Pro Flo 1000 HC	1000	Class I
Pro Flo 1000S	1000	Class I
Pro Flo 1500 HC	1500	Class I
Pro Flo 1500S	1500	Class I
[1] Suffix S denotes attached pretreatment tank. Suffix P denotes attached pump tank. Suffix SP denotes attached pretreatment tank and pump tank. Suffix SL denotes tapered tank. Suffix SL2 denotes pretreat tank, not attached. [2] Pro Flo 500 HC System also as a component of the Pro Flo 500 HCP, Pro Flo 500 HCS, and Pro Flo 500 HCSP, which have a 400 gallon pretreatment tank and a 770 gallon pump tank. The pretreatment tank and pump tank were not tested and are not included as components of the Certified models. [3] Pro Flo 500 SL System also as a component of the Pro Flo 500 SLPT with Effluent Pump Chamber. The pump chamber was not tested and is not included as a component of the Certified model. [4] Pro Flo 500 SL2 System also as a component of the Pro Flo 500 SLPT2 with Effluent Pump Chamber. The pump chamber was not tested and is not included as a component of the Certified model. [5] Pro Flo 500 SLPT2M has an attached 750 gallon pump tank. The pump chamber was not tested and is not included as a component of the Certified model. [6] Pro Flo 500 SLPT8 has an attached 800 gallon pump tank. The pump chamber was not tested and is not included as a component of the Certified model. [7] Pro Flo 500 TL System also as a component of the Pro Flo SLPT5, which has a 500 gallon pump tank. The pump chamber was not tested and is not included as a component of the Certified model. [8] Pro Flo 5060 HC System also as a component of the Pro Flo 5060 HCP, 5060 HCS, and 5060 HCSP, which have a 400 gallon pretreatment tank and a 800 gallon pump tank. The pretreatment tank and pump tank were not tested and are not included as components of the Certified models. [9] Pro Flo 600 HC System also as a component of the Pro Flo 600 HCP, Pro Flo 600 HCS, and Pro Flo 600 HCSP, which have a 450 gallon pretreatment tank and a 800 gallon pump tank. The pretreatment tank and pump tank were not tested and are not included as components of the Certified models. [10] Pro Flo 600 SL System also as a component of the Pro Flo 500 TL. The pump chamber was not tested and is not included as a component of the Certified model. [11] Pro Flo 600 SL System also as a component of the Pro Flo 600 SLPT with Effluent Pump Chamber. The pump chamber was not tested and is not included as a component of the Certified model. [12] Pro Flo 800 HC System also as a component of the Pro Flo 800 HCS, which has a 800 gallon pump tank. The pump tank was not tested and is not included as components of the Certified models.

NOTE: This company may sell products complying with all applicable requirements for
      Certification nationally and internationally, but has advised NSF of authorized
      representatives physically located in the following:
      
      Alberta          Oklahoma         Texas
      
      Contact the Listed company directly for further product information and availability in
      your area.

SeptiTech®
69 Holland Street
Lewiston, ME 04240
United States
800-318-7967
207-333-6940
Visit this company's website

Facility : Lewiston, ME

Model Number	Rated Capacity Gallons/Day	Classification
STAAR™ 0.5	500	Class I
STAAR™ 0.75	750	Class I
STAAR™ 1.0	1000	Class I
STAAR™ 1.2	1200	Class I
STAAR™ 1.5	1500	Class I

NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
      documentation shipped with the product are Certified.
NOTE: This company may sell products complying with all applicable requirements for
      Certification nationally and internationally, but has advised NSF of authorized
      representatives physically located in the following:
      
      Arizona          California       Connecticut      Maine            Maryland
      Massachusetts    New Hampshire    North Carolina   Ohio             Rhode Island
      Vermont          Washington       West Virginia
      
      Contact the Listed company directly for further product information and availability in
      your area.

SludgeHammer Group Ltd.
4772 US 131 South
Building D
Petoskey, MI 49770
United States
231-348-5866

Facility : Petoskey, MI

Model Number	Rated Capacity Gallons/Day	Classification
S-1000	1000	Class I
S-400	400	Class I
S-600	600	Class I
S-800	800	Class I

Stallion Infrastructure Services, Ltd.
950 Corbindale
Suite 400
Houston, TX 77024
United States
701-300-4751
Visit this company's website

Facility : Port of Vermillion, LA

Model Number	Rated Capacity Gallons/Day	Classification
StaRT	1000	Class II

TuffTiger, LLC
8413 Parker Road
Houston, TX 77078
United States
866-770-7785
713-633-0058
Visit this company's website

Facility : Houston, TX

Model Number	Rated Capacity Gallons/Day	Classification
T-500	500	Class I
T-558[1]	500	Class I
T-600	600	Class I
T-750	750	Class I
T-1000	1000	Class I
T-1500	1500	Class I
T-500F[2]	500	Class I
T-600F	600	Class I
T-750F	750	Class I
T-1000F	1000	Class I
T-1500F	1500	Class I
[1] TuffTiger T-558 includes a 485 gallon pretreatment tank. [2] Suffix F denotes a fiberglass tank.

NOTE: This company may sell products complying with all applicable requirements for
      Certification nationally and internationally, but has advised NSF of authorized
      representatives physically located in the following:
      Texas

Number of matching Manufacturers is 35
Number of matching Products is 761
Processing time was 1 seconds

NSF Product and Service Listings

Connect with NSF